Creda | Advanced Control Heating Systems | Operating instructions | Creda Advanced Control Heating Systems Operating instructions

EPIC L22
Uniclass L7522
(56)
e
ef
or
Co
nt
ro
lli
ng
he
at
lik
e
Fe
at
ur
in
g
ne
ve
rb
th
e
ne
w
Cl/SfB
Product Directory Summer 2013
Heating Solutions
www.credaheating.co.uk
Index
Index
Introduction
Green deal approved measure Design application support
Quantum energy system
As electricity turns green, the world is turning to Quantum A closer look at the Quantum energy system
Low-carbon and low-cost too Controlling heat like never before The Quantum energy system. How will you benefit?
The Quantum room heater The Quantum cylinder NOBO advanced control panel heaters
Introduction to NOBO
E4EU Electronic panel heaters
C4N Electronic panel heaters
LST Electronic Low Surface Temperature panel heaters
Multi zone control options
Control options
Electronic control panel heaters
Contour100 Electronic panel heaters TPRIII E Electronic pilot plus panel heaters
Newera Electronic Electronic panel heaters Control options Mechanical control panel heaters and electric storage heating
TPRIII M/MT Mechanical thermostatic panel heaters TPRIII NC No controls panel heaters Newera Plus Panel heaters TSR Sensor Plus & Slimline Electric storage heaters Eco-Response Storage radiant heaters TSR Supaslim Combi Combined storage heaters SFHA Sensair Automatic Electric storage fan heaters Storage heater accessories Towel rails and bathroom warmers
Proline TPL Fast response electric ladder towel rails TD and Solarail Traditional style electric towel rails Control options
3
4
5
6-7
8
9
10-11
12
13
14
15
16
17
18
19
20-21
22
23
24-25
26
27
28
29
30-31
32
33
34
35
36
37
Fan heaters and tubular heaters
CDF Compact downflow fan heaters SolPlinth Electric plinth heaters for base units 38
39
SolTube Tubular heaters 40
Commercial space heating
TSF Turbo Commercial storage fan heaters SolHeat Outdoor patio heaters SolQuartz/SunQuartz Shortwave infra-red radiant heaters SolFan High level fan heater SunFan Wall mounted fan heater SolScreen Warm air curtains Website
Heater sizing table
Heating design request form
Cable and connection points
2
41
42
43
44
45
46
47
48-49
50
51
www.credaheating.co.uk
For over 40 years, Creda NOBO has been
Introduction
Creda Heating
dedicated to heating the nation. In the future,
low-carbon electricity will make electric
heating the first choice for a lower carbon
footprint and low lifetime cost of ownership.
As pioneers in electric heating, Creda Heating continues to lead the
field with innovative and contemporary product design – all backed
by nationwide after-sales support and a dedicated sales team.
All Creda electric heating products:
•are designed to comply with Part L of the Building Regulations
•feature advanced heating controls to help achieve the best possible
SAP ratings
•have a lower capital and maintenance cost than a gas boiler system
•offer total flexibility in design
•are quick and easy to install or upgrade
•are virtually maintenance-free and require no annual landlord
safety certificate
Whatever the requirement – from new build to refurbishment, a single
room to a whole development, whether domestic or commercial –
Creda Heating offers the most effective, economical and
environmentally-friendly heating solution.
Now Creda Heating is proud to introduce Quantum, an electric heating
system like no other. Quantum is up to 27% cheaper to run and uses
up to 22% less energy than comparable static storage heaters.
Quantum: Controlling heat like never before.
The Green Deal
Quantum has been accepted as a Green Deal ‘measure’
by the department of Energy and Climate Change.
The Green Deal is an innovative government-backed financing
mechanism that lets householders pay for energy-efficient
improvements through savings on their energy bills.
As the ‘golden rule’ of the scheme is that the expected energy
savings must be greater than the cost of the improvements,
by installing Quantum householders should save energy
and money – as well as helping the environment.
See the following for further information:
www.gov.uk/greendeal
www.credaheating.co.uk
3
Creda Heating – Design application support
Design application support
Application design
We have over 40 years experience in designing and supporting electrical heating
installations. We are able to offer an expert application design service for all our
products, helping new and existing customers alike to specify Creda products into real
buildings and live projects, either off-plan, commenced new-build or refurbishments.
Our team of consultants will provide a clear and detailed specification
of the products required for each property, together with a clear and
simple summary of the total products for the project.
To take advantage of this service, simply complete the form on page 50
and send with a set of plan and elevation drawings to:
Creda NOBO Design
Millbrook House
Grange Drive
Hedge End
Southampton
SO30 2DF
Alternatively, information can be emailed to
design@credaheating.co.uk
Part L
In recent times, the proliferation of environmental legislation and
ongoing revisions to the Building Regulations, all designed to reduce
carbon intensity and improve energy efficiency, have made the design
process more complex. However, we are able to offer advice on this
as well.
If you need specific advice on a project please speak to one of
our heating design consultants or your Creda regional manager.
Need a quick guide?
If you only need to know how much heat you need for one or two
rooms please use our sizing tables on pages 48 and 49 which
will give you an indication of the kilowatt loading required for
a specific room. Alternatively we have an on-line calculator,
which can be found at www.credaheating.co.uk
4
Creda on the Web
All of the information contained in this brochure is also available
on our website www.credaheating.co.uk.
In addition to standard product information, you will also find
details of wholesalers and contractors who sell and install the
Creda Heating range, installation and operating instructions,
brochure downloads, online heating calculator and a wealth
of other self help information.
www.credaheating.co.uk
As electricity generation turns ever greener, the world is turning
to electric heating. Nationally-supplied, low-carbon electricity
provides security of energy supplies and low-carbon heating,
while helping to reduce the devastating impact of climate change.
The product of three years’ research and development, the Quantum energy
system combines the very latest in electric heating with an economical
demand response management tool. The result: the world’s most advanced
electric space and water heating system.
State-of-the-art
electric heating
+
An economical
demand response
management tool
=
Quantum: the world’s
most advanced electric
space and water
heating management
system
Quantum in a nutshell
The Quantum energy system is designed to use low-carbon energy
from renewable sources – such as hydro electric generation and wind –
and converts this into heat. When demand is low, the smart system
stores this green energy up in the form of heat to be used when
it’s needed.
The Quantum Energy System – As electricity turns green, the world is turning to Quantum
As electricity turns green,
the world is turning to Quantum
Quantum: the smart electric heating system that
stores green energy.
The Quantum energy system offers homeowners:
•a low-cost, low-carbon, electric heating system
•an electric heating system whose carbon use
will decrease over time
•optimal efficiency, comfort and control
www.credaheating.co.uk
5
The Quantum Energy System – A closer look at the Quantum energy system
A closer look
at the Quantum
energy system
The Quantum energy system consists
of three elements which can work as
a system or be purchased individually:
The Quantum Room Heater: an ultra-efficient heater
•Ensures heat is always readily available thanks to its boost element
•Achieves low running costs by utilising off-peak tariffs.
On a room-by-room basis, 90% of the heating requirement
is anticipated to be met by off-peak energy
•Has an attractive, state-of-the-art and compact design
(no deeper than a double wet radiator)
•Automatically adjusts to, and matches, the user’s needs/lifestyle
through dynamic storage capacity
•Covers previous ‘fixing marks’ of most comparably
sized traditional storage heaters
•Has an easy-to-use electronic user interface with LCD display,
featuring a room temperature setting with seven-day programmer
•Has facility for an optional communications link for demand
side management to help stabilise the grid
•Provides extremely rapid heat-up through fan-assisted output
Room Temperature Profile
Quantum CQH125 vs Conventional Static 24kWh Storage Heater & Direct Acting Heater
Average weekday profile
ROOM TEMPERATURE ºC
Quantum energy use = 10 kWh + 0.2kWh (fan) = 10.2kWh – 9 hours heating @ 21ºC
Conventional storage energy use = 12.2 kWh + 1.3kWh direct acting supplemetary heating = 13.6kWh – 9 hours heating @ 21ºC
Morning
rise
25
Return
from work
Leave
for work
Retire
to bed
20
15
DAILY CYCLE HOURS
0
00:00
06:00
12:00
18:00
00:00
Comfort temperature profile created by static storage heater
and direct acting heater
Potential energy saving using Quantum
Comfort temperature profile created by Quantum Heater
Ideal comfort temperature profile
*For test conditions please see page 12.
The Quantum Room Heater operates on any
off-peak tariff for low running costs.
6
www.credaheating.co.uk
The Quantum Hub*:
optional system manager
•Provides a long-life, low-maintenance, economical hot water supply
•Enables two-way communications potential between
Quantum products and the energy supplier
•Delivers fast-filling baths and powerful showers through mains
pressure hot water
•Is future-proofed to support upcoming changes in energy supply
•Is manufactured from stainless steel and comes complete
with a 25 year warranty on the cylinder
•Can be mounted discreetly anywhere in the property thanks to its
compact size, which is approximately half the size of this page
•Is available in five sizes – from 125 to 300 litres, both vented
and unvented
•Allows the Quantum Room Heater and Quantum Cylinder to be
connected to a permanently live electrical circuit – and still benefit
from off-peak rate costs
•Features advanced controls with electronic user interface with LCD
display, providing feedback on hot water temperature and availability
•Communicates with each Quantum appliance via a transceiver
•Has a hard-wearing, black insulation outer shell made from
recycled materials, giving class-leading heat retention capability
•Has demand side management capability through bi-directional
communications to energy supplier
The Quantum Energy System – A closer look at the Quantum energy system
The Quantum Cylinder*:
smart energy water storage
*Available Autumn 2013
The Quantum Cylinder provides smart energy
water storage and a long-life, low-maintenance,
economical hot water supply.
www.credaheating.co.uk
The Quantum Hub enables two-way communications
between Quantum and the energy supplier.
7
The Quantum Energy System – Low-carbon and low-cost too
Low-carbon
and low-cost too
The Quantum Room Heater is up to 27% cheaper to run and uses up
to 22% less energy* than other comparable electric heaters. How?
It’s all thanks to new developments in insulation technology and controllability.
*Ratified by comparative energy and running cost data using SAP 2012 (issued May 2013).
Here’s how the Quantum Room Heater’s running costs stay so low:
1. Off peak tariffs
2. New insulation technology
Quantum utilises off-peak tariffs whenever possible to keep costs
to a minimum. So end users get the benefits associated with electric
heating at running costs unachievable with other ‘direct-acting’
electric heating systems.
The Quantum Room Heater uses the very latest insulation material –
one with a thermal conductivity even lower than that of still air.
This prevents heat being lost or wasted.
3. Installation and maintenance
The Quantum Room Heater is easy to install and maintenance free.
7 day programmer
7 day programmer with 3 pre-set (adjustable)
timer profiles and display adjustment.
Holiday mode giving frost protection,
child lock settings and many more features.
End users get the benefits associated with electric
heating at running costs unachievable with other
‘direct-acting’ electric heating systems.
8
www.credaheating.co.uk
Part of the beauty of the Quantum Room Heater is its controllability.
The heater monitors and adapts to its environment – that is, climate conditions
and usage patterns – and delivers heat accordingly. Should the end user
wish to adjust heat levels manually, they can do that too!
The Quantum Room Heater will:
The end user can:
•Monitor weather and usage patterns, learning from and adapting to
these to deliver precisely the right amount of heat, when required
•Use the built-in electronic interface with LCD display and rotary ‘click’
selector to manually adjust the temperature
•Respond to any changes in climate and/or room temperature
conditions, altering configurations automatically
•Choose from a preset programme menu, complete with options
such as ‘Home All Day’ or ‘Holiday Mode’, then relax as the
Quantum Room Heater takes control
•Monitor the target room temperature and intuitively adjust output
to maintain this – using a thermostat that is accurate to within
a fraction of a °C
•Work seamlessly with the grid, using off-peak tariffs when possible
to minimise user costs and maximise efficiency
The Quantum Energy System – Controlling heat like never before
Controlling heat
like never before
Controls
Target temperature display is colour coded to assist visually impaired.
Heater will maintain selected temperature using a thermostat
accurate to within +/- 0.3°C.
Rotary click selection adjusts target temperature and enables
menu scrolling and selection.
The Quantum Room Heater will monitor the target
room temperature and intuitively adjust output
to maintain this – to within a fraction of a °C.
www.credaheating.co.uk
9
The Quantum Energy System – How will you benefit?
The Quantum energy system.
How will you benefit?
Quantum has a number of benefits, whether you are a specifier,
end user, energy supplier or installer, so get ready to reap the rewards
of the Quantum energy system.
For the specifier:
For the end user:
✓An aesthetically-pleasing, state-of-the-art design
✓An aesthetically-pleasing, state-of-the-art design
✓A compact system, no deeper than a double wet radiator
✓ Use of a nationally-supplied and future-proofed fuel source
✓ F ull coverage of the ‘fixing marks’ of most comparably-sized
traditional storage heaters
✓A system that’s economical to run – helping to alleviate
fuel poverty
✓ A
wide range of heater sizes, allowing flexibility in
project specification
✓ A greater level of comfort, delivering heat only when required
✓Simple specification within SAP
✓ A system that’s highly responsive to external temperature changes
✓Technology that’s low-cost, low-carbon and future proofed
✓Low-maintenance and high reliability
✓A virtually maintenance-free system
✓A fully automatic system (after initial set-up)
Technology that’s low-cost, low-carbon and
future proofed.
10
✓Greater accuracy in room temperature control
A system that’s economical to run and highly
responsive to external temperature changes.
www.credaheating.co.uk
For the installer:
✓Multiple communication options
✓Easy installation, minimising time on site
✓Off-peak tariff market protection
✓Economical demand response management tool
✓Electronic controller preset with the time and date, as well as
user programmes
✓ L ow-cost, low-carbon and flexible energy storage – it’s entirely up to
the utilities how much energy they store and when they store it
✓ R
eversible cable entry points and coverage of all previous
‘fixing marks’ of most comparably sized storage heaters
✓ Better use of wind generation – so helping to decarbonise the grid
✓Minimised user confusion thanks to easy-to-use controls
The Quantum Energy System – How will you benefit?
For the energy supplier:
✓Greater supply-demand balance
✓Higher system reliability and security
✓ Reduced need for investment in networks
✓Lower standby generation cost
Low-cost, low-carbon and flexible energy storage –
it’s entirely up to the utilities how much energy they
store and when they store it.
www.credaheating.co.uk
Easy-to-use controls mean there’s less chance of
user confusion.
11
The Quantum Energy System – The Quantum Room Heater
The Quantum Room Heater
Model No.
CQH070
CQH100
CQH125
CQH150
Height
730mm
730mm
730mm
730mm
Depth
185mm
185mm
185mm
185mm
Width
703mm
865mm
1069mm
1069mm
Installed Weight
83kg
107kg
135kg
155kg
Output Rating (stored energy)
700W
1000W
1250W
1500W
Input Rating
1560W
2200W
2760W
3300W
Max. Storage Capacity
10.9kWh
15.4kWh
19.3kWh
23.1kWh
Boost Element Rating
630W
880W
1130W
1300W
Energy Cell Packs – packaged separately, required in the following quantities:
Model No.
CQH070
CQH100
CQH125
CQH150
Energy cell packs required
6
8
10
12
Controls
Charge Controller
Thermostat
Safety Devices
Electronic user interface with
LCD display offering room
temperature setting, 7 day
programmer, installer settings,
3 preset timer profiles, holiday
setting and more.
Fully automatic charge controller
incorporates self learning
algorithms to optimise daily
energy storage, using multiple
sensors to automatically adjust
the charge taken based on
recent energy use patterns
and future programmed
requirements.
Electronic – accurate
to +/- 0.3oC.
Electromechanical limit
thermostat (self resetting).
Fan
Thermal Insulation
Battery Backup
Approvals
Low rev/low noise heat
circulation fan with variable
speed and soft start.
Front, rear top and ends –
microporous silica.
Base – calcium silicate slab.
3.3V coin cell battery to
backup real time clock.
Battery life > 5 years.
BEAB/EN60335/EMC/CE.
Storage Core
Colour/Finish
Supply
Warranty
High density bonded
magnetite energy cells.
White.
230-240V/50Hz. Off-peak +
24 hour supply required.
2 years.
Electromechanical cut-out
(manual reset).
Electromechanical over
temperature limit thermostat
for fan.
Climate Room Test Chamber – conditions for Room Temperature Profile graph on page 6.
A climate room was built to accurately replicate a room from typical UK housing stock. It has two external walls and two internal walls, and the temperatures
outside all walls, ceiling and floor are accurately controlled.
The U values of walls, windows and door are as follows:
Room dimensions
4m x 3m x 2.4m
U values:
12
The Test
A daily temperature profile was set up outside the two external walls to
simulate an average heating day in a property based in Sheffield, England.
Double layer solid brick
outer walls
2.0
Minimum outside temperature
Maximum outside temperature
+4oC
+11oC
Insulated internal walls
and ceiling
0.34
The heating periods were set at 07:00 to 09:00 and 16:00 to 23:00.
The target room temperature was 21°C during these times.
Insulated floor
0.25
The following heaters were tested under these conditions:
UPVC double glazed window
3.3
UPVC double glazed door
3.0
Air change rate
1 A/C per hour
• 3.4kW (input) static storage heater with manual charge control
– supplemented with a direct acting heater
• 2.8kW (input) Quantum Heater (CQH125)
For results please see graph on page 6.
www.credaheating.co.uk
The Quantum Energy System – The Quantum Cylinder
The Quantum Cylinder
Cylinder Model
CQCd 125-580
CQCd 150-580
CQCd 210-580
CQCd 250-580
CQCd 300-580
Volume
125l
150l
210l
250l
300l
Height
945mm
1115mm
1490mm
1765mm
2065mm
Diameter
580mm
580mm
580mm
580mm
580mm
T&P Valve
720mm
890mm
1265mm
1540mm
1840mm
Immersion 1
208mm
208mm
208mm
208mm
208mm
Immersion 2
570mm
650mm
820mm
1265mm
1495mm
Type
Controls
Technical features
Vented and unvented systems.
ighly intuitive ergonomically
H
designed electronic
control system.
Class-leading insulation levels.
Direct cylinders.
i-directional communication
B
to power utility of specific control
and configuration parameters.
Modern, easy-to-read display.
Colour/Finish
ser adjustable cylinder water
U
temperature to +/- 1°C.
Black.
Heat loss over 24 hours
( T 45k): Storage capacity @
65°C water ( T 55k)
125l: 0.95kWh 7.1kWh
High level energy management
system will interact with external
(Wide Area) Networks and local
(Home Area) Networks.
“ Boost” immersion heater for
rapid response short-term use.
150l: 1.1kWh
8.8kWh
210l: 1.4kWh
12.7kWh
250l: 1.55kWh 15.3kWh
300l: 1.96kWh 18.4kWh
Communicates stored water
volume and temperature.
ot water volume
H
availability display.
Automatic sterilisation function.
ser can set normal water
U
temperature and boost
water temperature.
lgorithm specifically calculates:
A
– Hot water volume
– How much more energy can be
stored in the tank until
the maximum set temperature
is reached
– Water and energy consumption
over a defined period
oost element automatically
B
disengages upon reaching
target temperature.
Holiday set back function.
Energy Storage Capacity Water Cylinders
This graph illustrates the standing heat loss of a range
of Quantum Cylinders against a range of references.
This graph illustrates the energy storage capacity of
the Quantum Cylinder across a range of temperatures.
6.0
ENERGY STORAGE CAPACITY (kWh)
CYLINDER HEAT LOSS (kWh/24hr)
Cylinder Heat Loss Comparison
5.0
4.0
3.0
2.0
1.0
0.0
50
100
150
200
250
300
350
30
25
20
15
10
5
0
50
100
Quantum (kWh/24h)
Spray foam 35mm (kWh/24h)
CHeSS Std (kWh/24h)
CHeSS Best (kWh/24h)
150
200
250
300
350
CYLINDER VOLUME (I)
CYLINDER VOLUME (I)
Red jacket (kWh/24h)
Q_cyl_30K (kWh)
Q_cyl_45K (kWh)
Q_cyl_70K (kWh)
Notes
• Creda Quantum values measured for direct electric cylinder
in accordance with EN12897 at a temperature difference
between water (65°C) and ambient (20°C) of 45K.
• CHeSS standard and best values in accordance
with central heating system specification CE 51 2008,
and Energy Saving Trust publication.
• Red Jacket calculation based on 80mm fibre glass insulation.
www.credaheating.co.uk
• Spray foam cylinder heat loss data taken from competitor
product range. The stated insulation thickness is 35mm.
• It should also be considered that cylinder replacements are
covered under Part L1B of building regulations (conservation
of fuel and energy). Part L1B refers to the Domestic Building
Compliance Guide which calls for cylinders to have a heat loss of
no more than the high level products as specified in CE 51 2008.
13
The NOBO range
The NOBO range
NOBO Heating, recognised for its Norwegian manufactured electric panel heaters
and energy control systems, is an integral part of the Creda Heating range.
For over 30 years NOBO products have built a reputation amongst
professional specifiers, architects, designers and property developers
who need a comprehensive solution to their electric heating needs.
From a single, reliable panel to a multi zone programmable network
of heaters, NOBO can bring warmth and comfort to any environment.
NOBO heating products have been specified worldwide across
a diverse range of applications and temperature conditions.
There are three NOBO ranges:
• E4EU – Slim, flat fronted panel heater with top
air outlet and built in 7 day timer.
• C4N – Slimline panel heater with front air outlet
and a range of control modules.
• LST – Low Surface Temperature panel heater
with a range of control modules.
C4N Range
A versatile, slimline 500W – 2kW panel heater supplied without controls.
C4N heaters will not operate unless a control module is purchased
separately and installed with the heater. These heaters are ideal for homes,
offices, commercial applications, hotels and student accommodation.
LST Range
A 500W, 800W or 1kW panel heater which complies with the NHS
guidelines on safe surface temperatures. This heater is larger than other
NOBO panel heaters so that no part of the heater will exceed 43oC during
operation, even at full output. This means that prolonged contact with the
heater will not result in physical harm, making the heaters safe for use in
areas with children, the elderly and infirm. LST heaters will not operate
unless a control module is purchased separately and installed with the
heater. These heaters are ideal for sheltered accommodation, retirement
homes, healthcare, public waiting areas, hospitals, nurseries and schools.
E4EU Range
A slim 500W – 2kW panel heater with built-in, fully programmable
digital 7 day timer. These are ‘all-in-one’, stand alone units and will
not operate as part of a central control system or with any of the other
NOBO control modules that are available. Panel heaters in the range
have 5°C – 30°C temperature scale and are ideal for homes, offices
and commercial applications.
Specification
To find out which system best suits your requirements, simply choose
your application from the left-hand column of the table below, then
decide how you would like to control the system by moving across
the four control columns. Please note that the NOBO range is extensive,
and this is only a guide to the most common applications.
Control
Application
Domestic
Onboard Timer
E4EU
C4N with GERT9
Commercial
E4EU
C4N with GERT9
Remote Control
Central Control
Radio Frequency
Pilot Wire
C4N with EC700 & RDC700
and towel rail – RS700
Water heater – RSX700
C4N with ZSE
C4N with EC700
and RDC700
C4N with
ZSE or GCO
Ask for details
Ask for details
C4N with GCH
Education and Healthcare
LST with LST-T9
LST with EC700 & RDC 700 LST
and towel rail – RS700
Water heater – RSX700
LST with GCH
or GCO
Student Accommodation
C4N with GCL
Ask for details
Ask for details
Hotel
To confirm that your specification is correct, or for further information, please contact your Creda NOBO Heating Regional Manager.
Useful Tips
• No power cable is supplied with the C4N & LST heaters, it comes in the packet with the control module
• Tamperproof covers are available for all models
14
www.credaheating.co.uk
NOBO advanced control panel heaters – E4EU
E4EU
Electric panel heaters with integral timer
Simple, understated, practical, economical. Admired for their unfaltering reliability,
unprecedented heating options and cost effectiveness, this robust and stylish range
of products is used extensively across both domestic and commercial applications.
Key features
• Fully programmable 24 hour and 7 day digital timer with auto on,
auto off and manual modes
• Power failure memory backup of 150 hours using internal Ni-cad
rechargeable battery
Technical Specification
• Thermostat – see ‘Control options’
• Finish – pure white to RAL 9010
• Easy cleaning hinged wall brackets
• Protection – locking covers for controls are available
• Extremely shallow depth
• IP rating – splashproof to IP24
• Minimal maintenance
Width
• Available in 500, 750, 1000, 1250, 1500 and 2000 watt outputs
Depth
• Variable temperature control from 5°C to 30°C
• Over heat safety cut-out
Height
• Top air outlets
• Rounded corners
Control options
Accessories:
• Tamperproof thermostat cover S14 (2170614)
• E4EU thermostatic controller supplied as standard
Product Selector
Model
E4EU0500
E4EU0750
E4EU1000
E4EU1250
E4EU1500
E4EU2000
Rating (kW)
0.5
0.75
1
1.25
1.5
2
www.credaheating.co.uk
Height (mm)
400
400
400
400
400
400
Width (mm)
475
625
775
975
1125
1525
Depth from wall (mm)
71
71
71
71
71
71
Weight (kg)
3.4
4.3
5.2
6.4
7.5
9.9
15
NOBO advanced control panel heaters – C4N
C4N
Electronic panel heaters
The C4N is a classic, slimline heater available in outputs ranging from
500W to 2kW. This is a heater for all applications, with an unobtrusive
design and quality finish it provides a clean and elegant heating solution
for the home, office, hotel or commercial space.
Key features
Technical Specification
• Extensive range of outputs
• Low capital costs
• Thermostat – see ‘Control options’
• Virtually silent electronic thermostats
• Finish – pure white to RAL 9010
• Extremely shallow depth
• Protection – locking covers for controls are available
• Tamperproof capability
• IP rating – splashproof to IP24
• Complete range of custom designed thermostat control modules
Width
Width
Depth
Control options
• RDC 700 (compatible with the Orion 700 RF control unit)
• GER T9 (dual electronic thermostat and timer)
• GE (single electronic thermostat)
Height
Height
• GCL (dual electronic thermostat and runback timer, PIR or key
card timers)
• GCO (dual electronic thermostat and pilot wire for central timer,
PIR or key card timers)
• GCH (dual electronic thermostat and pilot wire for central timer,
PIR or key card timers)
Accessories:
• 2170611 B ASB plastic cover for on/off switch
• 2170613 AOB R80-PL plastic cover for thermostat slider
• ZSE (dual electronic thermostat with fixed economy setting
and pilot wire)
Please see pages 18 and 19 for more details
Product Selector
Model
Rating (kW)
Height (mm)
C4N0500
0.5
400
C4N07500.75
400
C4N1000
1
400
C4N1250
1.25
400
C4N1500
1.5
400
C4N2000
2
400
16
Width (mm)
Depth (mm from wall)
Weight (kg)
425
78
3.1
525
78
3.7
675
78
4.6
825
78
5.6
975
78
7.0
1325
78
8.7
www.credaheating.co.uk
Low surface temperature panel heaters
The LST meets the NHS Estates Health Guidance Notes on
‘Safe Hot Water and Surface Temperature’, as the surface
temperature does not exceed 43°C at full output.
Key features
• Tamperproof capability
This stylish convector heater incorporates a safety cut-out,
virtually silent electronic thermostat and creates no hot-spots,
which can be a major weakness of other brands. The thermostat
controls can also be fitted with locking covers making them
tamperproof. All of these features ensure safe operation within
certain sectors of the community, such as:
• Wide range of control options
• Nursing homes
• Range of outputs
• Maximum surface temperature of 43tC
• Safe air leaving temperature
NOBO advanced control panel heaters – LST
LST
• Nurseries
Control options
• Hotels
• RDC 700 LST (compatible with the Orion 700 RF control unit)
• Public buildings
• LST T9 (dual electronic thermostat with timer)
• Hospitals
• GCH (dual electronic thermostat and pilot wire for central timer,
PIR or key card timers)
• Doctors’ surgeries
• GCO (dual electronic thermostat and pilot wire for central timer,
PIR or key card timers)
• Residential homes
Please see pages 18 and 19 for more details
• Schools
• Public waiting areas
The heater utilises the proven electronic plug-in proportional
thermostats with temperature scales designed to achieve optimum
warmth and comfort with maximum safety. Typically, the range will
be 14°C – 24°C and where control management is required the
NOBO Orion 700 wireless RF controller or the pilot wire controlled
GCH and GCO modules can be used for the management of
economy and safety levels.
Technical Specification
• Thermostat – see ‘Control options’
• Finish – pure white to RAL 9010
• Protection – locking covers for controls are available
• IP rating – splashproof to IP24
Width
Depth
Height
Accessories:
• 2170611 B ASB plastic cover for on/off switch
• 2170613 AOB R80-PL plastic cover for thermostat slider
Product Selector
Model
LST5N05
LST5N08
LST5N010
Rating (kW)
0.5
0.8
1
www.credaheating.co.uk
Height (mm)
515
515
515
Width (mm)
775
1275
1575
Depth from wall (mm)
145
145
145
Weight (kg)
6.3
9.25
11.25
17
Multi zone control options for C4N and LST Ranges
Multi zone control
Wireless and pilot wire programmers
Total control of your heating system, when and where you
need it. Amidst growing interest in energy conservation,
the NOBO multi zone controls provide the ability to
reduce energy use and achieve optimal comfort.
Orion 700 (EC 700) Wireless RF programmer
The Orion 700 is stylish, easy to use and ingenious in its technical
capabilities. This unique system can automatically control a wide range
of individual zones in living rooms, bedrooms and bathrooms.
Heating zones are created by giving them a name, a named zone may
then be given a programme. Programmes consist of seven individual and
separate days, (Monday to Sunday) and each day is divided up into 48
half-hourly periods which may be set on either (on) or (off). Individual or
group override facility for holidays and frost protection is also provided.
Key features
• Designed to provide 24/7 cost effective zone controlled heating
• Ancillary function control
Receivers
RDC 700
The RDC 700 models have built-in receivers for the C4N panel
heaters, which can interpret commands and relay signals back
to the control unit.
RS 700
For control of small appliances up to 10 amps, typically
towel rails.
RSX 700
For control of fixed appliances up to 16 amps. DIN rail mounting,
typically for hot water.
• Fully compatible with the acclaimed C4N and LST heaters
Width
• Elegant, contemporary design in smooth black finish
Depth
• Capable of controlling up to 100 zones
• Automatically relays signals on to other receivers
Height
• Daily or weekly individual control options
• Simple installation
• Full programme retention in the event of a power failure
Product Selector
Model
EC700
RSX700
RS700
18
Enclosure
IP20
IPX0
IPX0
Voltage (v)
230 – 240
230 – 250
230 – 240
Consumption (ma)
80
20
20
Height (mm)
180
70
57
Width (mm)
113
54
53
Depth (mm)
46
57
28
www.credaheating.co.uk
The C4N and LST ranges of panel heaters require a control module to operate.
Thermostat modules for C4N
ZSE 8833211
5°C – 30°C
5 10 15 20 25 30
GE 8833215
5°C – 30°C
5 10 15 20 25 30
❄
GER T9 8833225
5°C – 30°C
5 10 15 20 25 30
❄
RDC 700 8833661
5°C – 30°C
5 10 15 20 25 30
❄
GCL 8833431/8833256
14°C – 24°C
GCH 8833227E
14°C – 24°C
GCO 8833233
14°C – 24°C
17 24
Application
• Apartments
• Standard applications
• Domestic
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Fixed set-back temperature setting
Application
• Standard applications
Specification
• Single electronic thermostat
• Proportional temperature regulation
Application
• Standard applications
• Domestic
• Commercial
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Integral programmable timer
• Fixed frost protection setting
Application
• Central control applications
• Domestic
• Commercial
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Radio frequency control
• Fixed frost protection setting
Application
• Student applications
• Occasional occupation
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Integral single shot runback timer
• Fixed setback temperature setting
14
15
14
16 18 20 24
Application
• Hotels
• Nursing homes
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Cable connection for remote control
• Fixed setback temperature setting
14
16 18 20 24
Application
• Hotels
• Nursing homes
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Cable connection for remote control
• Fixed setback temperature setting
Application
• Hospitals
• Nurseries
• Offices
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Radio frequency control
• Adjustable setback temperature setting
Application
• Public areas
• Domestic applications
• Office disabled facilities
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• Integral timer with 9 preset programmes
• Frost protection setting
Application
• Nursing homes
• Sitting areas
• Children’s play areas
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• LST temperature scale
• Fixed setback temperature setting
Application
• Doctors surgeries
• Hospitals
• Office disabled facilities
• Various applications
Specification
• Double electronic thermostat
• Proportional temperature regulation
• LST temperature scale
• Fixed frost protection setting
Control options for C4N and LST Ranges
Control options – C4N and LST Only
Thermostat modules for LST
RDC 700 LST 8833662
5°C – 24°C
LST-T9 8833224
5°C – 24°C
GCH 8833227E
14°C – 24°C
GCO 8833233
14°C – 24°C
5 10 15 20 24
❄
P3
5
16 18 20 24
14
16 18 20 24
14
16 18 20 24
www.credaheating.co.uk
19
Advanced control heating systems – Contour100
Contour100
Electronic panel heater
The Contour100 panel heater range offers high quality build
and panel finish with contemporary radiator styling. Contour100
panel heaters incorporate electronic thermostatic controls
which allow very precise regulation of room temperatures.
Key features
Technical Specification
• Contemporary radiator styling
• Electronic thermostatic control, accurate to +/-0.3°C
• Elements – finned, mineral-filled sheath type
• Convected heat for rapid warm up
• Thermostat – electronic with 5°C setback control capability
• Virtually silent operation
• Finish – white powder coated steel and thermoplastic
• Pre-set background temperature at 5°C below thermostat setting
(when connected to a programming unit supporting setback feature)
• Protection – auto reset thermal cutout
• Hidden thermostat range limiter feature – for additional economy
• Range of optional plug-in electronic timer modules, including:
– 24 hour digital timer (Model TPR E24T)
– Single zone 7 day pilot wire programmer (Model TPR E7DT)
– Runback timer (Model TPR ERBT)
• Cable – 1.2 metres, 4 core (live, neutral, pilot and earth)
• IP rating – IPX4 (splashproof)
• Supply – 230/240V AC single phase
Width
Depth
• Compatible with Creda 4 zone pilot wire central controller
(Model PWE4ZC)
Height
Product Selector
Model
CEP500E
CEP750E
CEP1000E
CEP1500E
CEP2000E
20
Rating (kW)
0.5
0.75
1
1.5
2
Height (mm)
536
536
536
536
536
Width (mm)
503
503
671
741
911
Depth (mm)
104
104
104
104
104
Weight (kg)
12
12
15
17.5
22
www.credaheating.co.uk
Electronic panel heaters
Control options
A range of optional plug-in control modules, which can be removed
from the heater for easy programming, provide the flexibility to meet
a wide range of control specifications:
Electronic Thermostat
• TPR E24T 24 hour digital timer. Provides 24 hour programmable
on/off control.
+2°C
+1°C
MECHANICAL
THERMOSTATS
MAY OVERSHOOT BY
UP TO 2°C
ELECTRONIC
THERMOSTATS
ARE ACCURATE
TO ±0.3°C
+0.3°C
-0.3°C
Advanced control heating systems – Electronic Controls
Controls
SET TEMPERATURE
• TPR E7DT single zone, pilot wire programmer controls up to
10 slave heaters. Provides 7 day programmable on/off control.
-1°C
-2°C
The electronic panel heaters feature highly accurate electronic thermostats
(+/-0.3°C), providing superior comfort and operating efficiency.
As the room temperature nears the desired set point, power to the
elements is reduced. The room temperature is closely monitored to an
accuracy of less than 0.3°C, minimising overshoot and temperature drift,
resulting in better energy efficiency and user comfort.
• TPR ERBT runback timer. Provides installer programmable runback
time up to 4 hours (in 30 minute increments). Can be locked
into heater.
Control options
4 zone pilot wire central controller.
Allows 7 day programming of
comfort/setback time settings
of multiple pilot wire linked
heaters in up to 4 separate zones.
See page 20 for more details.
Model PW E4ZC
Product Selector
Model
TPRE24T
TPRE7DT
TPRERBT
PWE16A
PWE4ZC
Product description
24 hour plug-in timer module
7 day single zone plug-in timer module
4 hour run back timer plug-in module
16 amp pilot wire interface unit
4 zone pilot wire central controller
www.credaheating.co.uk
Height (mm)
50
50
50
86
132
Width (mm)
70
70
70
86
86
Depth (mm)
145
145
145
22
38
21
Advanced control heating systems – TPRIII E
TPRIII E
Electronic Pilot Plus panel heaters
TPRIII Electronic Pilot Plus panel heaters incorporate electronic
thermostatic controls to allow precise regulation of room
temperatures – essential when comfort, economy and energy
efficiency need to be considered in equal measure.
Key features
Technical Specification
• Front facing grille for efficient heat projection
• Styling to complement Eco-Response radiators with pure white finish
• Element – finned, mineral-filled sheathed type
• Electronic thermostatic control +/-0.3°C, completely silent operation
• Thermostat – electronic with fixed 5°C setback facility
• Preset background temperature at 5°C below thermostat setting
(when connected to a programming unit supporting setback feature)
• Finish – white powder coated steel and thermoplastic
• Optional plug-in electronic timer modules, including:
– 24 hour digital timer (Model TPR E24T)
– Single-zone pilot wire programmer (Model TPR E7DT)
– Runback timer (Model TPR ERBT)
• Compatible with Creda 4 zone, wall mounted pilot wire signalling
multi-heater programmers
• Protection – auto reset thermal cut-out
• IP rating – IPX4 (splashproof)
• Cable – 1.2 metres, 4 core cable (live, neutral, pilot and earth) • Supply – 230/240V AC single phase
Width
• Hidden thermostat range limiter feature – for additional economy
Depth
• Simple detachable wall bracket for easy installation
Height
TPRIII E Electronic rotary thermostat
Improved economy may be achieved by limiting the thermostat rotational
range, by means of the mechanical ‘peg and hole’ feature hidden beneath
a removable cap on the thermostat knob.
For more control options, please see page 23.
Product Selector
Model
TPRIII500E
TPRIII750E
TPRIII1000E
TPRIII1250E
TPRIII1500E
TPRIII2000E
22
Loading (kW)
0.5
0.75
1
1.25
1.5 2
Height (mm)
430
430
430
430
430
430
Width (mm)
450
620
620
690
690
860
Depth (mm)
108
108
108
108
108
108
Weight (kg)
5.2
6.6
6.6
7.1
7.1
8.5
www.credaheating.co.uk
Electronic panel heaters
The Newera Electronic range provides style, flexibility and ease of use in
any building. Built-in twin electronic thermostats allow control of comfort
and setback temperatures. Heaters can be used individually or linked for
a complete heating system.
Key features
• Twin electronic thermostats for comfort and setback
Technical Specification
• Compact, attractive design occupying minimum wall space
• Elements – finned, metal sheathed mineral filled type
• Mains borne and pilot wire control options
• Thermostats – twin electronic
• Hinged wall mounting bracket to allow easy access for cleaning
and decorating
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
• IP Rating – IPX4 (splashproof)
Width
Integral twin electronic thermostats
for setting comfort and setback
temperatures.
Advanced control heating systems – Newera Electronic
Newera Electronic
Depth
Height
Control options
Newera Style and Newera Electronic panel heaters may be connected as
a centrally controlled system using the optional mains borne accessories.
The MB programmer
communicates with the heaters
and controls a comfort or setback
thermostat as per the times set
in the programmer.
MB Programmer Model MBPRG
MB Interface Model MBIF
Allows 7 day programming of
comfort/setback time settings of
multiple pilot wire linked heaters
in up to 4 separate zones.
4 zone pilot wire central controller
Model PW E4ZC
Product Selector
Model
Rating (kW)
Height (mm)
Width (mm)
Depth (mm)
EPH500 0.5
450 37078
EPH1000
1
450
445
78
EPH1250
1.25
450
520
78
EPH1500
1.5
450
590
78
EPH2000 2
450 74078
PWE4ZC
MBPRG
MBIF
4 zone pilot wire central controller
Newera MB Programmer
Newera MB Interface
www.credaheating.co.uk
23
Advanced control heating systems – Control options
Control options
The performance and economy of Creda heating products can be further enhanced by the use of control options best suited
to the type of installation and lifestyle requirements.
Wall mounted controller for 4 zone pilot wire linked heating system
Pilot wire signalling – ideal control system
option for new build applications.
4 zone wall mounted central controller –
mains powered with 4hr backup.
Eco-Response Storage
Radiant Heaters
Contour100 Electronic
Panel Heaters
Number of heaters – up to 20 in the
same zone.
TPRIII E Electronic
Panel Heaters
Controller features:
TIME – individual 7 day programming
of multiple time periods MODES – on/off,
comfort/setback or comfort/frost.
Also with manual override selection
and holiday functions.
Pilot Wire Controller
Model PW E4ZC
Panel heater features – integral electronic
thermostat for comfort temperature selection
with a fixed 5°C setback from comfort,
and frost protection at 5°C.
Newera Electronic
Panel Heaters
Note: Pilot wire installations are appropriate for single phase connection only.
Pilot wire heating system
Dimensions
86mm
38mm
The PW E4ZC central controller allows 7 day programming for comfort
and setback temperature periods of multiple pilot wire linked heaters in
up to four separate zones.
• 4 separate heating zones
• Heater modes – Comfort/Setback, Comfort/Frost or Comfort/Off
132mm
• Wall mounted mains powered controller with capacitor back up
(approx. 4hrs)
Zone 1
Zone 2
Zone 3
Zone 4
240v mains supply
24
PW E16A Interface unit
www.credaheating.co.uk
Pilot wire signalling – ideal control system
option for new build applications.
Single zone plug-in module controller –
mains powered by panel with 12hr backup.
Contour100 Electronic
Panel Heaters
TPRIII E Electronic
Panel Heaters
7 day timer
Pilot Wire
Model TPR E7DT
Number of heaters – up to 10 slave panels
pilot wire linked in a single zone.
Timer features:
4 on/off time periods for weekdays and 4
for weekends.
Additional features: key lock and ‘advance
to next programme’ functions.
Plug-in 24 hour timer module for single heater control
Single heater control – not system linked.
Advanced control heating systems – Control options
Plug-in 7 day heater module for single zone pilot wire linked system
24hr plug-in timer module – mains powered
by panel with 12hr backup.
Number of heaters – single heater
control only.
Contour100 Electronic
Panel Heaters
TPRIII E Electronic
Panel Heaters
Timer features:
4 on/off time periods in 24hr.
Additional features: key lock and ‘advance
to next programme’ functions.
24 hour timer
Model TPR E24T
Plug-in runback timer module for single heater control
Single heater control – not system linked.
Runback plug-in timer module – mains
powered by panel.
Number of heaters – single heater
control only.
Contour100 Electronic
Panel Heaters
TPRIII E Electronic
Panel Heaters
Timer features:
on/off fixed runback time from 1/2hr up to a 4hr
period (1/2hr increments selected at installation).
Special function – an alternative selection
that switches from comfort to setback for
an initial 24hr period, then switches to frost
protect mode.
Runback timer
Model TPR ERBT
Plug-in timer for single zone mains borne panel heating system
Mains borne signalling – no additional signal
cabling required ideal for retro fit installations.
Single zone plug-in programmer – powered
by panel with battery backup.
Number of heaters – any number of panels
each with a receiver interface unit fitted.
Newera Electronic
Panel Heaters
MB Programmer
Model MBPRG
MB Receiver
interface
Model MBIF
www.credaheating.co.uk
Controller features – 3 separate time clocks
with hourly on/off period selection over 24hrs.
Each can be allocated to one or more days of
the week.
Panel heater features – integral twin linked
electronic comfort and setback thermostats.
25
Mechanical panel heaters & electric storage heating – TPRIII M/MT
TPRIII M/MT
Mechanical thermostatic panel heaters
Designed to complement Creda storage heaters, TPRIII mechanical
thermostatic panels are ideal for any areas which require heating
for short periods of the day. Cost effective, they offer an efficient
way to extend existing heating systems and come with various
control options to suit different applications.
Key features
Technical Specification
• TPRIII (MT) models have programmable 24 hour timers
• TPRIII (MT7) model has a programmable 7 day timer
• Element – mineral-filled sheathed type
• Full or half power output selection
• Thermostat – capillary type
• Adjustable thermostat (5-30°C)
• Finish – white powder coated steel
• Convected heat for rapid warm-up. Suitable for domestic
or commercial use
• Protection – auto reset thermal cut-out
• IP rating – IPX4 (splashproof)
• Frost protection setting
• Supply – 230/240V AC single phase
• Front heat outlet grille for efficient heat circulation
• Cable – 900mm
• Lockable dust cover
Width
Depth
• Detachable hinged wall mounting bracket for fast installation
and easy cleaning
Height
Range options
TPRIII M mechanical thermostat
(all ratings).
TPRIII MT mechanical thermostat
and 24 hour timer (all ratings).
TPRIII MT7 mechanical thermostat
with 7 day timer (2kW model only).
Product Selector
Model
Thermostat only models
TPRIII500M
TPRIII750M
TPRIII1000M
TPRIII1250M
TPRIII1500M
TPRIII2000M
Timer models 24hr
TPRIII500MT
TPRIII750MT
TPRIII1000MT
TPRIII1250MT
TPRIII1500MT
TPRIII2000MT
Timer model 7 day
TPRIII2000MT7
26
Rating (kW)
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
0.5 0.75 1
1.25 1.5 2
430
430
430
430
430
430
450
620
620
690
690
860
108
108
108
108
108 108
4.8
6.2
6.2
6.6
6.6
8.0
0.5 0.75 1
1.25 1.5 2
430
430
430
430
430
430
450
620
620
690
690
860
108
108
108
108
108
108
4.8
6.2
6.2
6.6
6.6
8.0
2
430
860
108
8.0
www.credaheating.co.uk
No controls panel heaters
A range of panel heaters without any integral controls
for use in applications where external control of
temperature and time programming is required.
Key features
Technical Specification
• Convected heat for rapid warm-up
• Suitable for domestic or commercial use
• Element – mineral-filled sheathed type
• Front heat outlet grille for efficient heat circulation
• Finish – white powder coated steel
• Detachable hinged wall mounting bracket for fast installation
and easy cleaning
• Protection – auto reset thermal cut-out
• IP rating – IPX4 (splashproof)
• Supply – 230/240V AC single phase
• Cable – 900mm
Width
Depth
No built-in controls
to enable external time
and temperature control.
Mechanical panel heaters & electric storage heating – TPRIII NC
TPRIII NC
Height
Product Selector
Model
No controls models
TPRIII500NC TPRIII750NC TPRIII1000NC
TPRIII1250NC TPRIII1500NC TPRIII2000NC
Rating (kW)
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
0.5
0.75
1
1.25
1.5
2
430
430
430
430
430
430
450
620
620
690
690
860
108
108
108
108
108
108
4.8
6.2
6.2
6.6
6.6
8.0
www.credaheating.co.uk
27
Mechanical panel heaters & electric storage heating – Newera Plus
Newera Plus
Panel heaters
A simple robust stand alone thermostatic panel heater.
The Newera Plus range offers a low-cost heating solution
ideal for hotels or student accommodation.
Key features
• Single mechanical thermostat, stand alone heating
Technical Specification
• Excellent value and simple to operate
• Elements – finned, metal sheathed mineral-filled type
• Robust construction and easy to install
• Thermostat – single mechanical
• Compact – takes up minimal wall space
• Protection – two level thermal safety overheat
• Hinged wall mounting bracket to allow easy access
for cleaning and decorating
• Supply – 230/240V AC single phase
• IP rating – IPX4 (splashproof)
• Ideal for conservatories, extensions, hotels and
student accommodation
Width
Depth
Height
Single mechanical thermostat.
Product Selector
Model
Rating (kW)
Height (mm)
Width (mm)
Depth (mm)
HPH7500.75 450 37078
HPH1000
1
450
445
78
HPH1250
1.25
450
520
78
HPH1500
1.5
450
590
78
28
www.credaheating.co.uk
Mechanical panel heaters & electric storage heating – TSR Sensor Plus & Slimline
TSR Sensor Plus & Slimline
Electric storage heaters
The multi-sense system in the TSR Sensor Plus automatically
controls heat storage to maintain the desired room temperature.
TSR Sensor Plus (AW models)
Technical Specification
Working on any low-cost tariff, these heaters monitor the room
temperature and energy stored within the heater core to avoid
overcharging. This can save up to 15% of the energy used by
ordinary storage heaters.
• Elements (storage) – mineral insulated stainless steel sheathed
• Insulation – opacified silicaceous aerogel and mineral fibre mat
• Storage core – high density iron oxide compound
Key features
• Multi-sense two thermostatic sensor control system for heat storage
and room temperature control
• The only storage heater available that automatically monitors
and controls heat output through a thermostatic sensor
• Controls couldn’t be simpler – one for input and one for output
• Multi-sense system enables energy savings of up to 15%
• Controls** (output) – manually adjustable thermostat controlling
output damper
• Controls (input) – hydraulic charge control thermostat,
manually adjustable
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
Depth
Width
• Automatic control means little if any control adjustment –
just set and forget
• All multi-sense sensors are mounted within the heater
• Lockable controls cover
Height
TSR Slimline (MW models)
TSR Slimline models offer the same
range of sizes and outputs but with
simple manual input and output controls.
**TSR6AW/MW have no user controls and are IPX2 rated (drip-proof)
Key features
• Simple controls – one for input
and one for output
• Lockable controls cover
• Manual control adjustment
Product Selector
Model
TSR6AW
TSR12AW
TSR18AW
TSR24AW
TSR6MW
TSR12MW
TSR18MW
TSR24MW
Rating
storage (kW)
0.9
1.68
2.5
3.4
0.9
1.68
2.5
3.4
Charge acceptance
(7hrs) (kWh)
6.3kWh
11.8kWh
17.6kWh
23.5kWh
6.3kWh
11.8kWh
17.6kWh
23.5kWh www.credaheating.co.uk
Number
of elements
1
2
3
4
1
2
3
4
Number
Height (mm)
Width (mm)
of core bricks
4
705
335
8
705
560
12
705
788
16
705
1016
4
705
335
8
705
560
12
705
788
16
705
1016
Depth (mm)
Weight (kg)
170
170
170
170
170
170
170
170
41
77
110
145
41
77
110
145
29
Mechanical panel heaters & electric storage heating – Eco-Response
Eco-Response
Storage radiant heaters
Warmth where it’s needed, when it’s needed in a single room
or across the home. A constant low level of background heat
prevents the fabric of the building from cooling. On demand,
this fast-acting appliance raises the temperature to meet your
needs, providing total control and low running costs.
Key features
• Economical use of energy utilising the best of stored and direct acting
heating technologies
Technical Specification
• Contemporary design – looks good in any home
• Elements (storage) – 650W incoloy sheathed,
mineral filled elements
• Unobtrusive – takes up no more space than a traditional wet radiator
• Element (direct acting) – cable-on-foil thin facia panel
• Simple one-touch electronic controls with child lock facility
• Thermostat (input) – integral electronic charge limiter.
Maximum core temperature 670°C/690°C at full charge
• Rapid response to changing temperature demands
• Designed for rapid assembly to keep installation costs down
• Requires no annual maintenance
• Optional central controller for 4 zone pilot wire linked heating system
Stored heat – maintains low level
background heat to keep the fabric of
the building warm, utilising economy
off-peak electricity.
Simple integral control on top of
the heater – allows easy adjustment
to achieve the user’s preferred
comfort temperature.
Radiant heat – rapidly raises
temperature to required comfort
level on demand.
• Thermostat (output) – integral electronic thermostat
with child lock facility
• Thermal insulation – Carbowool 128kg/m2, Microtherm G
and calcium silicate
Width
Depth
• Energy retention cells – high density bonded magnetite
• Protection (storage) – automatic reset core limit thermostat
and manual over-temperature cut-out
Height
• Protection (direct acting) – automatic reset limit thermostat
and automatic reset over-temperature cut-out
• Finish – white polyester and zinc coated steel with grey base
• Cable (storage) – 1.6m 2.5mm2 3 core
• Cable (direct acting) – 1.6m 0.75mm2 2 core
• Supply – 230/240V AC single phase
Depth
Width
Height
Feet width
Minimum clearance required
• 75mm either side of heater
• 150mm in front of the heater
• 250mm directly above the heater
Product Selector
Model
ER300
ER400
ER500
Designed heat
Charge
Input rating,
Input rating,
Number
Number
loss (kW) acceptance (kWh) off-peak (kW) radiant elt. (kW) of elements of bricks
0.7
9.1
1.3
0.28
2
8
1
13.65
1.95
0.34
3
12
1.4
18.2
2.6
0.39
4
16
Weight
(kg)
65
94
124
Height
(mm)
712
712
712
Width
(mm)
600
830
1060
Depth
(mm)
130+10
130+10
130+10
Feet position
(mm)
295
523
751
PWE4ZC4 zone pilot wire central controller
30
www.credaheating.co.uk
Storage radiant heaters
Why Eco-Response?
Conventional heater
1
2
With a conventional ‘wet’
heating system, when heating
goes off, building shell cools.
The building shell has to then
be warmed again before room
feels comfortable.
3
This takes time and energy –
slow response.
Eco-Response
1
2
It is smarter to maintain low
level background heat.
The room temperature can be
raised quickly and efficiently
when needed.
3
Mechanical panel heaters & electric storage heating – Eco-Response
Eco-Response
Economical.
Responsive.
Intelligent.
PART L and SAP 2005
The Creda Eco-Response has been developed to help meet the needs of Part L 2006 Building Regulations
and provides enhanced SAP scores.
Specifiers will benefit from the ‘integrated storage/direct acting heater’ category within table 4a of SAP 2005
which rewards the enhanced controllability of Eco-Response with a 100% efficiency rating, placing this leading
technology in heating type 2 with a responsiveness weighting of 0.75.
Control options
4 zone pilot wire central controller
Allows 7 day programming
of comfort/setback time settings
of multiple pilot wire linked heaters
in up to 4 separate zones.
See pages 24–25 for more details.
Model PW E4ZC
Matching TPRIII E electronic panel
heaters also available for pilot wire linked
heating systems (See pages 24–25). Use Eco-Response in living
areas and TPRIII’s in bedrooms, conservatories etc. with a 4 zone control.
www.credaheating.co.uk
31
Mechanical panel heaters & electric storage heating – TSR Supaslim Combi
TSR Supaslim Combi
Combi storage heaters
The Supaslim Combi heater is designed to combine economic and low-cost
storage heating with an independently thermostat-controlled fan heater.
Effectively two heaters in one, the built-in fan can provide heat on its own or
in combination with the storage heater for a rapid boost to room temperature.
Key features
• Combines economic tariff rate storage heater with a fast and
responsive Warmflow fan heater for instant room heating
• The slimmest storage combination heater available
• Sensamatic fully automatic storage heater output ensures room
comfort levels are maintained throughout the day without user
intervention
• Quiet, low velocity Warmflow fan
• The Warmflow fan heater has manually adjustable room temperature
sensing thermostatic control accurate to within 0.5°C
• All controls are concealed behind a lockable flap
Technical Specification
• Elements (storage) – mineral insulated stainless steel sheathed
• Insulation – opacified silicaceous aerogel and mineral fibre mat
• Storage core – high density iron oxide compound
• Fan unit – crossflow
• Controls – hydraulic head temperature compensated, room and
storage core temperature sensitive, auto-set charge control
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
• Hydraulic input charge control thermostat provides auto-set input
charge control
Depth
Width
• Fan heater ratings can be set on full or half load (installation option)
Height
Product Selector
Model
Rating
storage (kW)
TSR12ACW
1.7
TSR18ACW
2.5
TSR24ACW
3.4
32
Direct
Charge acceptance
Number
acting (kW)
(7hrs) (kWh)
of elements
1/0.5
11.8
2
1.5/0.75
17.6
3
2/1
23.5
4
Number
Height (mm)
of core bricks
8
760
12
760
16
760
Width (mm)
560
788
1016
Depth (mm)
Weight (kg)
170
170
170
78
114
149
www.credaheating.co.uk
Storage fan heaters
Able to operate on virtually any tariff and with two and a half
times greater insulation levels than conventional storage
heaters, the SFHA achieves higher SAP and NHER ratings
than manual input storage heaters.
Key features
• Combines electric storage heating, direct acting heating
and fanned heat output with simple controls
• Fully automatic heat storage – no user adjustment required
on input controls
• High performance insulation works more effectively than
a conventional storage heater
• Heat output is via a quiet two speed fan
• Boost setting for high speed room heat up
• Fan can be switched off without altering thermostat setting
• Operates on virtually any tariff and takes better advantage
of extended or split tariffs
• Fanned heating avoids heat stratification
Technical Specification
• Elements (storage) – mineral insulated stainless steel sheathed
• Insulation – opacified silicaceous aerogel and mineral fibre mat
• Storage core – high density iron oxide compound
• Fan unit – two speed crossflow fan
• Controls (output) – regulated by fan, activated by integral
adjustable thermostat
• Controls (input) – hydraulic head temperature compensated, room
and storage core temperature sensitive, auto-set charge control
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
• Lockable controls cover
Depth
Width
• Negative pressure air movement through the storage
core avoids hotspots and heat leakage
• Fan operation can be controlled by an external timer,
such as the RFRTK7
Mechanical panel heaters & electric storage heating – SFHA Sensair Automatic
SFHA Sensair Automatic
Height
The incorporation of high performance insulation means that
stored heat is effectively retained by the heater, meaning that
more useful heat is available for later in the day. The heat output
is then regulated by a simple, thermostatically controlled fan
providing economical heat when and where you want it.
Control options
RFRTK7 RF remote thermostat and programmer kit.
Enables programmable time and temperature control using wireless
signalling between the remote wall mounted thermostat and the
receiver unit at the appliance.
Product Selector
Model
Rating
Direct Charge acceptance Number
Number
Remaining useful heat
storage (kW) acting (kW)
(7hrs) (kWh)
of elements of core bricks after 17hrs (static)
discharge (fan off) (%)
SFHA18AW 2.5
1.5
17.6
3
12
40
SFHA24AW 3.4
1.5
23.5
4
16
40
www.credaheating.co.uk
Height (mm) Width (mm) Depth (mm) Weight (kg)
705
705
788
1016
187
187
121
158
33
Mechanical panel heaters & electric storage heating – Storage heater accessories
Storage heater accessories
A choice of heater accessories to complement the storage heater ranges.
Useful shelves for utilising space above the heater and rail attachment to
warm towels and clothes.
TSR towel rails
Storage heater shelves
• Available for TSR 6, TSR 12 and
TSR 18 auto and manual models
• Warms and dries towels safely
• Matching white finish
• Quick and easy to fit
• Supplied complete with fixings
• Available in four widths to cover
all sizes of TSR storage heaters
and SFHA storage fan heaters
• Matching white finish
• Quick and easy to fit
• Supplied complete with fixings
Rail and shelf dimensions
Width
Depth
Height
Width
Height
Depth
Heater guard options
A range of guards, designed to protect against accidental contact
with the hot surface of the heater, is available for Creda heaters
from our suppliers:
C. Aiano Ltd.
Please contact them direct:
Tel: 020 7987 1184 Web: www.aianos.co.uk
Product Selector
Model
TR6
TR12
TR18
SHS6
SHS12
SHS18
SHS24
34
Product description
Storage heater towel rail attachment
Storage heater towel rail attachment
Storage heater towel rail attachment
Storage heater shelf
Storage heater shelf
Storage heater shelf
Storage heater shelf
Compatible products
TSR6A and TSR6M
TSR12A and TSR12M
TSR18A and TSR18M
TSR6
TSR12
TSR18 and SFHA18
TSR24 and SFHA24
Height (mm)
226
226
226
140
140
140
140
Width (mm)
391
618
826
405
630
858
1086
Depth (mm)
Ø10
Ø10
Ø10
93
93
93
93
www.credaheating.co.uk
Towel rails & bathroom warmers – Proline TPL
Proline TPL
Fast response electric ladder towel rails
Ladder style towel rail. Available in a choice
of two sizes with chrome or white finish.
Key features
Technical Specification
• Even heat distribution – no cold spots
• Compact, slimline design
• Control – cycling cutout
• Can be mounted for left or right cable entry
• Protection – two auto reset temperature limiters
• Oil-filled for even heat transfer
• Supply – 230/240V AC single phase
• IP rating – IPX5
Control options
Width
Depth
Height
RFRTK7 RF remote thermostat
and programmer kit
PW E16A pilot wire auxiliary
interface unit
Enables thermostatic and time
control using wireless signalling
between the remote wall mounted
thermostat and the receiver unit
at the appliance (also available
thermostat kit only see page 37).
Enables heaters without
electronic controls to be centrally
programmed, for on/off time
periods only, as part of a pilot
wire linked heating system
(see page 37).
Product Selector
Model
TPL180SW
PL220SW
PL260SW
TPL360SW
TPL180SC
PL220SC
PL260SC
TPL360SC
RF thermostat kits
RFRTK
RFRTK7
RFRI
Pilot wire interface unit
PWE16A
Description
Straight white
Straight white
Straight white
Straight white
Straight chrome
Straight chrome
Straight chrome
Straight chrome
Rating (Watts)
180
220
260
360
120
220
260
260
Height (mm)
610
843
610
843
610
843
610
843
RF remote thermostat kit
RF thermostat and programmer
RF additional receiver unit only
2000
2000
2000
Pilot wire auxiliary interface unit
3000
www.credaheating.co.uk
Width (mm)
453
453
602
602
453
453
602
602
Depth (mm)
80
80
80
80
80
80
80
80
Weight (kg)
6.0
6.9
7.8
11.0
6.0
6.9
7.8
11.0
35
Towel rails & bathroom warmers – TD and Solarail
TD and Solarail
Electric towel rails
Classically styled towel rails that warm and
dry towels. All models offer low energy use
whilst maintaining superior heat output.
TD towel rail range
Permanently liquid filled for maintenance free operation the TD towel rail range offers chrome and white options, ideal for drying and airing small
towels in areas such as kitchens, cloakrooms and ensuite bathrooms. The TD towel rail can be left switched on indefinitely with the low wattage
cartridge element providing economical operation.
Key features
TD Technical Specification
• 60W, 90W & 175W models available
• Available in white or chrome finishes
• Element – cartridge type
• Oil-filled for even heat transfer
• Cycling thermostat
• Mains neon indicator
• Protection – thermofuse
• Supplied with wall mounting brackets as standard
• Supply – 230/240V
AC single phase
• Durable white stove enamel or chrome plated
• IP rating –
IPX4 (splashproof)
• Can be mounted for left or right hand cable entry
Control options
RFRTK RF remote thermostat kit.
Enables thermostatic control of
electric towel rails using wireless
signalling between the remote
wall mounted thermostat and the
receiver unit at the appliance
(see page 37).
Solarail dry element towel rail range
Designed for towel drying in the bathroom, shower room or even kitchen
areas, Solarails are compact enough to fit in the smallest of spaces.
Solarail Technical Specification
• Flexible cable type
Width
Key features
• Cycling thermostat
• 50W dry element towel rails
• Protection – thermofuse
• Supplied with mains cable and mounting brackets for easy installation
• Finished in white or chrome
• Supply – 230/240V
AC single phase
• Low running cost
• IP rating – IPX4 (splashproof)
Depth
Height
Product Selector
36
Model
TD60C
TD90W
TD90C
TD120W
TD175W
RFRTK
Product Description
TD towel rail (chrome)
TD towel rail (white)
TD towel rail (chrome)
TD towel rail (white)
TD towel rail (white)
RF remote thermostat kit
Rating (Watts)
60
60
90
120
175
-
Height (mm)
616
851
851
616§
851
-
Width (mm)
533
533
533
533
533
-
Depth (mm)
93
93
93
93
93
-
CSR50W
CSR50C
Solarail 50 (white)
Solarail 50 (chrome) 50
50
518
518
518
518
85
85
www.credaheating.co.uk
The performance and economy of Creda heating products can be further enhanced by use of control options best suited
to the type of installation and lifestyle requirements.
Auxiliary heater interface for pilot wire linked heating system
Width
Depth
Pilot wire signalling – ideal control system
option for new build applications.
16amp interface unit – for auxiliary heaters
without any integral controls.
Number of heaters – single unit with up to
3kW maximum loading.
Height
Interface features:
on/off switching only as signalled by the
central controller.
Pilot Wire Interface
Model PWE16A
Proline T PL Electric
Ladder Towel Rails
TD Traditional Style
Electric Towel Rails
Installation – requires a 46mm deep single
gang metal back box for flush mounting.
Solarail Electric
Towel Rails
RF remote thermostat/programmer kits for auxiliary appliances
Width
Depth
Towel rails & bathroom warmers – Control options
Control options
Radio frequency signalling – wireless
signalling between thermostat/programmer
unit and the receiver at the heater.
Height
Number of heaters – multiple heaters
with receivers fitted up to a maximum total
loading of 2kW.
Thermostat unit features:
push on/off rotary control (5°C-30°C)
with 30 minute boost.
RF Thermostat &
Receiver Kit
Model RFRTK
RF Thermostat
& Programmer
Receiver
Model RFRTK7
www.credaheating.co.uk
RF Receiver
Model RFRI
Towel rails and other
heaters without controls.
RFRTK7 can also provide
time control for SFHA
fan unit
Thermostat with programmer unit –
4 programmable on/off time periods for
weekdays and weekends. LCD display
with 12hr backup memory.
Installation – must be mounted in a single,
recessed metal dock-box.
37
Fan heaters – CDF
CDF
Compact downflow fan heaters
Fast response downflow heaters offer a low-cost solution
for rapid heating on demand. Available in three models,
they are ideal for bathrooms, shower rooms and kitchens.
Key features
Technical Specification
• 2kW steps back to 1kW after warm up
• Pull cord operated
• Element – stitched type
• Power on neon indicator
• Protection – thermal cut-off and safety overheat
• Two integral safety devices
• Weight 1.45kg
• CDF2IPX4 is IPX4 rated for use in Zone 2 of a bathroom
• Supply – 230/240V AC single phase
• CDF2N – IPX2 rated
• CDF2IPX4 – IPX4 rated
Range options
Width
Depth
Height
CDF2IPX4
CDF2N
Electrical products installed in bathrooms
Heating products installed in zone 2 of a bathroom must
carry an IP rating of at least IPX4 (IPX5 if water jets are
going to be used in that area).
All electrical products must be connected in compliance
with the current IEE wiring regulations and the circuit
protected by an RCD.
Product Selector
Model
CDF2N
CDF2IPX4
38
Product description
Compact downflow (step down)
IPX4 rated downflow (step down)
Rating (kW)
2
2
Height (mm)
242mm
267mm
Width (mm)
229mm
250mm
Depth (mm)
109mm
131mm
www.credaheating.co.uk
Plinth fan heaters – SolPlinth
SolPlinth
Electric plinth heaters for base units
Small and compact, plinth heaters heat a room much faster
than a traditional radiator many times its size but do not
occupy valuable wall space. The heater sits neatly in kitchen
base units, reception desks, shop counters and even stair
risers to provide an unobtrusive flow of warm air at floor level.
Key features
• Choice of 3 models: manual, remote or no controls
Manual model (white fascia fitted)
Technical Specification
• Each model comes complete with white, brown and silver fascias
• Element – stitched ‘black heat’ type
• Automatic over temperature cut-out
• Fan – crossflow type
• Maximum output of 2kW (TM can be 1kW or 2kW)
• Thermoplastic body
• Low noise fan only option for cool air circulation (on TM models)
• Powder coated fascias white, brown and silver
• Easy slot in profile (no metal sleeve required)
• Weight 2.5kg
• Supply – 230/240V AC single phase
Width
Depth
Height
No controls model (brown fascia fitted)
Remote model (silver fascia fitted)
PH2TR supplied complete
with hand held on/off infra-red
remote control.
Product Selector
Model
PH2TM
PH2TR
PH2NC*
Rating (kW)
2
2
2
Product Description
Plinth heater 2kW thermostatic manual
Plinth heater 2kW thermostatic remote
Plinth heater 2kW no controls
Height (mm)
100
100
100
Width (mm)
400
400
400
Depth (mm)
200
200
200
*While stocks last
www.credaheating.co.uk
39
Miscellaneous heating – SolTube
SolTube
Tubular heaters
SolTubes are ideal where energy efficient gentle background
warmth and frost protection is needed in both domestic and
commercial applications. They are highly effective as window
demisters and for horticultural use, providing invaluable, effective
heating and frost protection in greenhouses and conservatories.
Key features
Technical Specification
• 60-360W outputs
• A range of 4 lengths and loadings
• Mineral filled sheathed throughout
• Complete with universal mounting brackets for floor or wall fixing
and 1.5m white cable with fitted plug
• Polyester epoxy powder coated aluminium body
Optional accessories
• Supply – 230/240V AC single phase
• High temperature glass filled nylon end caps and brackets
• IPX4 rated
Length
Depth
Diameter
Interlinking kit
STG guards*
Available for multiple installations
(100mm mounting centres).
We recommend the use of guards
for additional security in sensitive
areas such as schools, hospitals
and care homes. These can be
obtained from C.Ainao Ltd.
Tel: 020 7987 1184
www.aianos.co.uk
Product Selector
Model
CST1
CST2
CST4
CST6
*Guard short code STG1
STG2
STG4
STG6
Rating (Watts)
60
120
240
360
Diameter (mm)
70
70
70
70
Length (mm)
350
655
1265
1875
Depth (mm)
95
95
95
95
Tubular linking kit – Compatible for all above models
40
www.credaheating.co.uk
Commercial space heating – TSF Turbo
TSF Turbo
Commercial fan storage heaters
The TSF Turbo fan storage heaters provide controlled output
space heating with maximum economy and flexibility. It retains
up to 40% of its total stored heat after 17 hours, making it one
of the most energy efficient storage heaters on the market today.
Key features
• Smooth, rounded, modern appearance, compatible with
commercial interiors
• TSF Turbo can be used on all economy electricity tariffs
• Available in 3.4kW, 4.6kW and 5.7kW models
• Highly controllable with enhanced insulation for better performance
• In-built direct element for out of season heating using day
rate electricity
Technical Specification
• Insulation – opacified silicaceous aerogel and mineral fibre mat
• Storage core – high density iron oxide compound
• Storage elements – mineral insulated stainless steel sheathed
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase or 400V AC three phase
• Fanned heat is faster and more even in distribution, particularly near
ground level
Depth
Width
• Easy to use manual controls for room thermostat and economy charge
• Single or 3 phase installation capability
• Optional foot kit - SHF25i (fits all models)
Height
User controls
• Charge input control – used to control the length of time
the heater charges for
• Neon switch for fan – easy indication that the heater is energised
• Neon switch for direct acting element – gives user access to additional
heat when needed
• Heat output control – precise control over heat released to the room
Product Selector
Model
Rating (kW)
Direct acting
element load (kW)
TSF24K
3.4
0.7
TSF32K
4.6
1.1
TSF42K
5.7
1.5
Charge acceptance
Weight (kg)
(7hrs) (kWh)
23.8
137
32.2
176
39.9
215
www.credaheating.co.uk
Number
of core bricks
18
24
30
Height (mm)
Width (mm)
Depth (mm)
672
672
672
776
926
1076
250
250
250
41
Commercial space heating – SolHeat
SolHeat
Outdoor patio heaters
SolHeat patio heaters provide an economic, attractive
outdoor heating solution that is quick and easy to install,
and can be conveniently controlled at the ‘flick of a switch’.
Key features
• Low running costs as radiant heat heats people directly not the air
Technical Specification
• Instant heat cuts the cost of outdoor heating overall
• Element – 2kW gold quartz halogen lamp
• Silent running with no moving parts or noisy naked flames
• Finish – high quality aluminium case in silver
• Convenient – no need to refill gas bottles
• Reflector – high performance polished reflector
• Safe – no flammable gas bottles to be knocked over
• Fitted guard included
• Low capital cost as these heaters allow you to select fewer heaters,
but place them exactly where the heating need is
• IP rating – IPX4
• When used with PIR sensors, further energy savings are available
• Supply – 230/240V AC single phase
Width
Gold finish halogen lamp
The gold quartz halogen lamp
fitted to the SolHeat runs at up
to 2,200°C and offers extended
performance and 15% greater
transmission.
Patio heating – why choose electric?
Electric patio heaters provide the only viable method of heating
an outdoor space without wasting heat to the atmosphere.
Unlike gas heaters, their electric counterparts use infra-red lamps
designed to allow outdoor heating without significant wasted heat.
Depth
Height
Electric outdoor heaters heat people directly, rather than heating
the surrounding air, making them the most suitable solution for
outdoor heating. They can also be linked to automatic switches
and PIR sensors for further savings in energy.
The diagram shows the differences between the two technologies
and the comfort they provide.
Electric Patio Heater
Gas Patio Heater
Direct efficient heating
Wasteful inefficient heating
Output: 2kW
Output: 12kW
Product Selector
Model
CSP2
42
Rating (kW)
2
Product description
SolHeat outdoor patio heater Height (mm)
159
Width (mm)
594
Depth (mm)
144
www.credaheating.co.uk
Commercial space heating – SolQuartz/SunQuartz
SolQuartz/SunQuartz
Shortwave infra-red radiant heaters
Instant heat right where it’s needed. These short wave
infra-red heaters warm people, not the air. Their uses are
endless, from warehouses to churches. These efficient sun-like
heaters can penetrate damp air with minimal heat loss to the atmosphere.
Key features
• Up to 90% efficient at converting electricity into heat
• Lightweight and silent
• Instant sensation of heat with visible glow at switch on
• Universal mounting bracket
• Absolutely silent in operation
• All models can be connected to single phase 230V supply
• Long range heat projection
• CSQ45 model can also be connected to 3 phase supply
SolQuartz Technical Specification
• Infra-red shortwave radiant heating
• Tungsten halogen lamps, with ruby red quartz outer sleeve
• Steel case with aluminium reflector
• Adjustable wall mounting bracket included
SunQuartz Technical Specification
• Tungsten halogen lamps, 230/240V with ruby red quartz
outer sleeve
• Reflectors bright rolled, specular 99.8% aluminium,
electro-chemically brightened
• Electro zinc coated steel casing
• Satin silver paint finish
• High pressure die cast aluminium end castings
• Type 3 or C MCB with 7-10 tripping co-efficient
Depth
Width
• Epoxy polyester powder paint finish white/grey
• Supply – 230/240V AC single phase (3 lamp units
can be connected to a 380/415V 3 phase supply)
Width
Height
Depth
Height
Product Selector
Model Rating (kW)
Number of lamps
Recommended height (m)
CSQ15
1.5
1
2.5
CSQ30
3
2
3.5
CSQ45
4.5
3
4.0
Coverage at recommended height*
(Throw(A) x Spread(B)) (m)
3.4 x 3.7
5.7 x 5.7
7.1 x 6.9
Height (mm) Width (mm) Depth (mm)
256
380
506
440
440
440
310
310
310
*Calculated at 95w/m2 mounted at 45°
Product Selector
Model
SQ1.5
SQ2.0
SQ3.0
SQ4.0
SQ4.5
SQ6.0
Rating (kW)
1.5
2
3
4
4.5
6
Number of lamps
1
1
2
2
3
3
www.credaheating.co.uk
Height (mm)
185
185
370
370
555
555
Width (mm)
390
390
390
390
390
390
Depth (mm)
115
115
115
115
115
115
43
Commercial space heating –SolFan
SolFan
High level fan heater
The SolFan is a rapid response fan heater designed
for heating in smaller commercial installations and
can be used for air circulation in summer.
Key features
Technical Specification
• Compact design for smaller installations
• Multi-angle bracket with single screw locking for easy
airflow adjustment
• Thermostatic temperature control as standard
• Air circulation mode for summer use
• Wall remote control with thermostat supplied as standard
• Red neon indicating heater energised
• Nylon heater case
• Axial fan
• Thermostat range 5°C - 35°C
• Wire strung element
• Grey finish
• Protection – electrical reset
• Supply – 230V AC single phase
Width
Depth
Height
Controls
Thermostatic controller (included). For remote
switching on/off and variable thermostatic control.
Flexible Adjustment
40°
120°
Product Selector
Model
CSF3
Remote Rating (kW)
3
-
Noise level @1m (dBA)
24
-
Height (mm)*
378
60
Width (mm)
230
170
Depth (mm)
226
102
*with bracket
44
www.credaheating.co.uk
Commercial space heating – SunFan
SunFan
Wall mounted fan heater
The SunFan is a robust 3kW commercial/
industrial wall mounted fan heater design
to provide highly efficient heating in winter,
or cool air circulation in summer.
Key features
Technical Specification
• High air volume throughput of 300m3/hour
• Quiet running, totally enclosed motor
Depth
• Wall mounted with 2 part self supporting bracket
Width
• Multi-directional adjustment of 45° vertically and 150°
horizontally with single screw locking
• Remote control switch available as an option to provide
a cool air circulation facility
Height
• 1 year guarantee (UK)
• BEAB and CE approved
• Two tone grey
Accessories
The dual control switch can
be used to control the SunFan
remotely, switching it both on
and off and to fan only, for cool
air circulation in the summer.
Swivel Arm Vertical
Angle Adjustment
Product Selector
Product reference
SunFan
Dual Control Switch
*excluding bracket
Short code
SF3
DCS
Rating (kW)
3
-
Noise level@1m (dBA)
47.9
-
Height (mm)
229*
-
Width (mm)
267
-
Depth (mm)
260**
**to wall
www.credaheating.co.uk
45
Commercial space heating – SolScreen
SolScreen
Warm air curtains
The SolScreen range provides a welcoming
flow of warmed air close to open entrances
and is often chosen to help encourage
shoppers in through open entrances.
Key features
Technical Specification
• 3kW or 4.5kW models available
• Full heat, half heat and fan modes
• Tangential blower
• CSS3 can be set to output 3kW or 1.5kW
• Wire stitched element
• CSS45 can be set to output 4.5kW or 2.25kW
• Powder coated steel body white/black
• Fan only mode for summer air circulation
• Protection – electrical reset
• Can be fixed to the ceiling or wall mounted using the included bracket
• Supply – 230/240V AC single phase
• Bracket allows adjustment over air direction
• Central front panel switches for clear indication of operation mode
• Quiet running motor
Height
Controls
Operation is clear to see with front
mounted controls.
Depth
Width
Wall
Ceiling
Height
Depth
Width
Product Selector
Model
CSS3
CSS45
46
Rating (kW)
3
4.5
Recommended mounting height (m)
1.8 - 2.25
1.8 - 2.25
Height (mm)
214
214
Width (mm)
605
605
Depth (mm)
135
135
www.credaheating.co.uk
Website
Website
Our website includes a wealth of additional information to help you make
the right choice of heating system and to find your local supplier of
Creda products.
As well as the product information featured in this brochure, the site has
a comprehensive Help Centre which features:
• Calculate heating requirements – to ensure you select the right Creda
products for your heating requirements, simply type a few details
of your room into this online calculator
• Heating design service – let us take the pain out of your heating
design requirements if you need a heating solution for multiple
properties. We offer a number of service levels, all graded according
to customer deadlines and complexity of the scheme
www.credaheating.co.uk
• Where to buy – type in your postcode and details of your nearest
suppliers including phone number and map is returned
• Installation/Operation instructions – for quick access to installation
instructions for one of our products any time of the day or night
• Request a repair – if you do need a repair for a product, visit this page
for advice on what the procedure is for products in and out of warranty
Visit www.credaheating.co.uk
47
Heater sizing table
Heater sizing table
Creda provides a number of options,
to meet different property and
timescale requirements. If you
need to obtain an indication of
the heating requirements for
estimating or if you need heating
for one or two rooms, please use
the selection guide below.
Alternatively use our online
calculator at www.credaheating.co.uk
For single properties, please complete
the form on page 50 and send it
with a sketch plan to our heating
design department. We aim to provide
an accurate assessment within
7 working days.
For multiple properties, please send
us comprehensive scale drawings
(scale 1:50 or 1:100) together with
construction details and any other
relevant information. We offer a
14 working day service for this
type of assessment.
How to use this selection guide
The tables below provide heater sizing guidance
for traditional electric heating systems, including
Quantum, storage heaters and panel heaters.
For traditional electric heating the preferred
options for living and dining rooms are Quantum
or TSRACW combination storage heaters.
appropriate table. These tables do not
take into account particularly old properties
or those built very recently. If your property
fits into one of these classifications, please
complete the form on page 50 so that we
can provide a more accurate assessment.
For sizing guidance for Eco-Response
radiators please refer to page 49.
Knowing the floor area, the wall construction
and the number of outside walls, the heater
loading in kilowatts is indicated in the
Living or dining room: Quantum or panel heaters.
Heater loading in kW. Temperature 21°C
Floor
area
m2
12
16
20
24
28
32
Solid walls
no. of outside walls
1
2
1.84
2.16
2.08
2.48
2.64
3.12
2.96
3.44
3.28
3.92
3.52
4.32
3
2.88
3.20
3.92
4.32
4.80
5.28
Cavity walls
no. of outside walls
1
2
1.60
1.92
1.84
2.32
2.32
2.72
2.64
3.12
2.96
3.44
3.28
3.76
3
2.48
2.88
3.44
3.76
4.24
4.72
Insulated cavity walls
no. of outside walls
1
2
3
1.12
1.28
1.68
1.36
1.60
1.92
1.68
1.92
2.32
2.08
2.32
2.64
2.16
2.48
2.96
2.40
2.72
3.20
For TSRAW and MW heaters multiply loading by 2, for TSRACW multiply by 1.25.
Bedrooms: For bedrooms panel heaters are recommended.
Heater loading in kW. Temperature 18°C
Floor
area
m2
8
12
16
20
24
Solid walls
no. of outside walls
1
2
0.8
1.3
0.9
1.8
1.2
2.1
1.4
2.2
1.5
2.3
3
1.7
2.3
2.7
3.1
3.4
Cavity walls
no. of outside walls
1
2
0.8
1.0
0.9
1.4
1.0
1.7
1.2
2.0
1.2
2.1
3
1.4
2.1
2.2
2.6
2.9
Insulated cavity walls
no. of outside walls
1
2
0.8
0.9
0.8
1.4
0.9
1.6
1.0
1.8
1.0
1.9
3
1.4
1.8
2.1
2.4
2.5
For TSRAW and MW heaters multiply loading by 1.5.
Kitchen: Quantum or panel heaters.
Heater loading in kW. Temperature 18°C
Floor
area
m2
10
12
14
16
Solid walls
no. of outside walls
1
2
1.28
1.68
1.52
2.16
1.68
2.40
1.92
2.64
3
2.32
2.64
2.88
3.12
Cavity walls
no. of outside walls
1
2
1.12
1.60
1.36
1.84
1.60
2.08
1.68
2.32
3
1.92
2.32
2.48
2.72
Insulated cavity walls
no. of outside walls
1
2
3
For all kitchens with
cavity wall insulation
direct heating is preferred.
For TSRAW and MW heaters multiply loading by 2, for TSRACW multiply by 1.25.
Commercial heating For greater control and economy of operation Quantum heaters
are recommended. Sizing is based on a single storey with a ceiling height of 3m and
a minimum of 75mm of roof insulation.
Office: Quantum or panel heaters.
Heater loading in kW. Temperature 21°C
Floor
area
m2
15
20
25
30
40
50
Solid walls
No. of outside walls
1
2
2.16
2.96
2.64
3.52
2.96
4.08
3.52
4.72
4.80
5.92
5.28
6.80
3
4.08
4.48
5.20
5.84
7.68
8.40
Cavity walls
No. of outside walls
1
2
2.00
2.56
2.40
3.12
2.72
3.68
3.36
4.24
4.40
5.36
4.96
6.24
3
3.52
4.00
4.56
5.20
6.72
7.44
Insulated cavity walls
No. of outside walls
1
2
3
1.68
2.08
2.64
2.08
2.56
3.12
2.40
3.04
3.60
2.88
3.52
4.16
3.92
4.48
5.36
4.48
5.28
6.08
For TSRAW and MW heaters multiply loading by 2, for TSRACW multiply by 1.25.
48
www.credaheating.co.uk
Eco-Response radiator sizing – replacement systems
already be undersized). Therefore it is
recommended that combination storage
heaters are replaced with a larger size
of Eco-Response radiator, to ensure there
is sufficient capacity within the system
to match the capability of the convector
heater being replaced. In the case
of a 24kW combination storage heater,
it is recommended that an additional
appliance – either a second Eco-Response
radiator or Creda NOBO panel heater is added:
For sizing of Eco-Response radiators to replace
existing storage heater systems, replace the
existing heater with a similarly sized
Eco-Response radiator, as indicated below.
Due to the consistency of heat output from
Eco-Response radiators, this will provide
a significant improvement in room comfort
levels throughout the course of the day.
Existing heater
Eco-Response
TSR12AW/MW
ER300
TSR18AW/MW
ER400
TSR24AW/MW
ER500
Existing heater
When considering the correct replacement
for a combination storage heater, the frequency
with which the convector component is
used should be taken into consideration
(i.e. if it is used often, the heater may
Eco-Response radiator
TSR12ACW
ER400
TSR18ACW
ER500
TSR24ACW
2 x ER400,
or ER500 + panel heater
or ER500 + flame effect fire
How to use this
selection guide
The tables on this page are for use
with Eco-Response radiators only –
for other products please refer to our
selection charts on page 48. Unlike
the charts on page 48, these tables
cover all applications – living room,
dining room, kitchen and hallway –
and are designed to provide for an
internal temperature of 21°C.
Heater sizing table
Heater sizing table
Eco-Response radiators are designed
to provide primary heating in main
living areas, including living rooms,
dining rooms, kitchen/diners and
hallways/landings. This should be
supplemented in other rooms,
such as bedrooms and bathrooms,
with Creda electronic panel heaters.
Eco-Response radiator sizing – first time installations
The following chart provides guidance on
radiator sizing for first time installations
in key living areas for existing buildings.
Simply select the floor area of your room
from the left hand column, and choose the
correct number of outside walls from either
the cavity or insulated cavity wall columns.
These tables do not take into account
particularly old properties or those built
very recently. If your property fits into one
of these classifications, please complete
the form on page 50 so that we can provide
a more accurate assessment.
Floor
area
Cavity walls
Insulated cavity walls
m
Number of outside walls
Number of outside walls
2
1
2
3
1
2
3
2
ER500
ER500
ER400
+400n
ER400
ER400
ER500
16m2
ER500
ER400
+400n
ER400
+500n
ER400
ER500
ER400
+300n
20m2
ER400
+400n
ER400
+400n
ER500
+500n
ER500
ER400
+300n
ER400
+400n
24m2
ER400
+400n
ER400
+500n
ER400
+400n
+400n
ER400
+300n
ER400
+400n
ER400
+400n
28m2
ER400
+500n
ER500
+500n
ER400
+400n
+500n
ER400
+300n
ER400
+400n
ER500
+400n
32m2
ER500
+500n
ER400
+400n
+400n
ER400
+500n
+500n
ER400
+400n
ER400
+400n
ER500
+500n
12m
Note: A ceiling height of 2.4m and a minimum of 75mm of roof insulation is assumed.
www.credaheating.co.uk
49
Heating design request form
Heating design request form
Scheme No. (GD only)
Fax back to: 01489 773067
Completed form to be returned to Design Department: Creda Nobo,
Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF
Please note: We are unable to complete the scheme unless full name and address details are included
CompanyTelephone
Address Fax
Email
Contact
Site name
Address
Details
Type of property (for a flat, please tick ‘semi-detached’ unless there are other flats on both sides, in which case, tick ‘terrace’)
House 
Bungalow 
Flat  Other 
 (please specify) _____________
Detached 
Type of construction
Cavity wall Yes   No 
Insulation None   100mm 
With insulation Yes 
 150mm   200mm 
 No 
Solid walls Yes   No 
Glazing Single   Double 
Semi-detached 
Terraced 
Floor Solid   Timber 
Roof Pitched 
Approximate age of the property 
 Flat 
Products to be specified
Please list below the product ranges you would like us to base the scheme on. Alternatively leave blank and we will match the right products to your property.
Type/usage of room
(i.e. living room)
Area (m2)
Floor to
ceiling
height
External
wall
length
Window
area (m2)
External
door area
(m2)
Internal
wall
length to
unheated
areas
Is room
above
heated?
Roof
above?
Open
fireplace?
Please include a scaled/sketched drawing showing the relative position of the rooms.
50
www.credaheating.co.uk
Off-peak cable
Direct acting cable
Quantum Range
Electronic room heater
24hr Mains Connection
Cable Fitted
Off-peak Connection
No Cable Fitted
Contour100
Electronic panel heaters
Nobo Range – C4N, LST, E4EU
Electronic panel heater
Width
TPRIII E
Electronic pilot plus panels
Depth
Width
Width
Height
Height
Newera Electronic/Newera Plus
Depth
Panel heatersWidth
TPRIII M/NC Mechanical
thermostatic panel heaters
Width
Height
Depth
Height
4 core cable (pilot wire capability).
4 core cable (pilot wire capability).
TSR Slimline and Sensor Plus
Electric storage
Depth
Width heaters
Eco-Response
Proline TPL Fast response electric
ladder towel rails
TD Traditional style
electric towel rails
Cable and connection points
Cable and connection points
Depth
Height
Height
3 core cable (pilot wire capability).
TSR Supaslim Combi
Storage heaters
Width
SFHA Sensair Automatic
Electric storage
Width fan heaters
Depth
Depth
Width
Height
Height
Depth
Straight rail
models may be
left hand or right
hand connection
Height
mounted.
May be left
hand or
right hand
connection
mounted.
May be left
hand or right
hand connection
mounted.
Solarail
Electric towel rails
Width
Plinth
Electric base unit fan heaters
Compact Downflow
Fan heater
Depth
Width
SolTube
Tubular heaters
Depth
PH2
Height
May be left hand or right hand
connection mounted.
May be left
hand or right
hand connection
mounted.
Width
Depth
Diameter
Height
TSF Turbo
Commercial storage fan heaters
Length
SolHeat
Outdoor patio heater
Depth
Width
SolQuartz
Heaters
SolFan
High level fan heater
Depth
Height
Height
SunFan
Wall mounted fan heater
SolScreen
Warm air curtains
Height
Width
www.credaheating.co.uk
Depth
51
Web:
www.credaheating.co.uk
Sales:
Fax: 0844 879 3581
Email:salesorders@credaheating.co.uk
Waste Electrical and Electronic Equipment Directive
We confirm that all our responsibilities under the Waste Electrical and Electronic
Equipment Directive will be fulfilled in accordance with the law. As required
within its provisions we are members of an accredited WEEE recycling scheme
for all product categories within the scope of the directive.
WEEE product registration number: GE0057TS
Trade Enquiries:
Tel: 0844 879 3587
Email:customer.services@credaheating.co.uk
Consumer Enquiries:
Tel: 0844 879 3588
Email:customer.services@credaheating.co.uk
The BEAB Approved Mark is the electrical safety mark of the UK’s leading
independent approvals specialists. It confirms to all in the supply chain that
all products displaying the mark have been evaluated to the highest European
and International safety standards.
All Creda Heating products are CE marked to certify that the product fulfils
the requirements of all relevant European product directives.
Creda NOBO
Millbrook House, Grange Drive
Hedge End, Southampton
SO30 2DF
www.credaheating.co.uk
All Creda NOBO products, unless otherwise stated, are covered by a full parts
and labour guarantee for one year from the date of purchase, so should the product
become faulty within the guarantee period, it will be replaced with a new product
or repaired by our service engineers, totally free of charge.
C015/0513
We reserve the right to alter product specification or appearance without prior
notice. All finishes in the brochure are as accurate as printing processes allow.
Download PDF