Daewoo | DX-9840E | Instruction manual | Daewoo DX-9840E Instruction manual

INSTRUCTION MANUAL
DX-9840E
DVD Player + V ideo Cassette Recor der
- Region code of DVD/Video player for home is region “2”
or ALL. In inserting a disc with other region code, it does
not operate. Please only use a disc with region code 2 or
ALL.
is a ‘DO NOT’ mark. If this mark is displayed in
operating the product, please wait for a while, then use it.
If " DO NOT" mark continues to be displayed in
pressing a button after that, it means the button does not
function in the currently played disc.
- Press a product button on the REMOTE then use the
product.
• DVD operation : [DVD] button
• Video operation : [VCR] button
Please read this manual carefully before connecting your DVD+VCR and operating it
for the first time.
Keep the manual in a safe place for future reference.
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
Product information
Contents
Product Information
DVD Operation
Important Safeguards ..................................................... 2
Advantages of This Product Are .... ............................ 5
Read Carefully before Using ......................................... 6
Identification of Controls ............................................... 7
Remote Control .............................................................. 11
Playing a desired scene ................................................ 36
Confirming the current PLAY mode on screen ....... 40
Selecting an AUDIO language, SUBTITLE language
and 3D AUDIO ............................................................... 42
Selecting ZOOM and Multi Angle.............................. 43
About MP3 , JPG and DivX® discs............................ 44
Displaying menus in a disc........................................... 48
Installation
Setting up your player................................................... 12
Connecting your player through extra equipment
(satellite system) ............................................................ 13
Connecting your player to the Hi-Fi system .............14
How to connect your player to another player,
How to connect your player to a camcorder ............ 15
Connecting Dolby Digital Amp with Digital Audio
Out Jack ........................................................................... 16
2nd Scart Socket ............................................................. 17
Basic Operation
Initial Installation ........................................................... 18
Setting time and date / Auto clock ............................ 19
OSD ON & OFF / Output Select ................................ 20
DVD Playback ................................................................ 21
VCR Playback ................................................................ 22
Recording ........................................................................ 23
Set-up
Language Setup .............................................................. 49
Video Setup ......................................................................51
Audio Setup..................................................................... 52
Others Setup ................................................................... 53
The others
About DVD...................................................................... 55
Basic information about VCR and Videotape.......... 58
Before doubting about troubles (VCR)....................... 59
Before doubting about troubles (DVD) ..................... 61
Specifications .................................................................. 62
VCR Operation
Tuning in New Stations ................................................ 25
Timer Recording ............................................................ 27
More Functions .............................................................. 30
Connections and Copying ........................................... 34
1
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Important Safeguards
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in
this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit 9
is fully transistorized and does not contain any parts
that can be repaired by the user.
1
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
2
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3
HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
IMPORTANT FOR LASER PRODUCTS
• LASER :
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this instruction manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
• DANGER : Visible laser radiation when open and interlock failed or
CLASS 1 LASER PRODUCT
defeated. Avoid direct exposure to beam.
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
• CAUTION : Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
4
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5
CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6
7
CAUTION: Any changes or modification in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
8
• Make sure the unit should be placed at least 8cm apart from the other home appliances or the
obstacles to get sufficient ventilation.
• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on this unit.
• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.
• The system is not completely disconnected from the mains when the / I button is set to
the position.
2
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
Product
Productinformation
information
Important Safeguards
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating current line plug (a plug having one blade wider
ATTACHMENTS
than the other). This plug will fit into the power
Do not use attachments unless recommended by
outlet only one way.
the unit’s manufacturer as they may cause
This is a safety feature. If you are unable to insert
hazards.
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
WATER AND MOISTURE
electrician to replace your obsolete outlet.To
Do not use this unit near water- for example, near
prevent electric shock, do not use this polarized
a bath tub, wash bowl, kitchen sink or laundry tub,
plug with an extension cord, receptacle, or other
in a wet basement, or near a swimming pool.
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
PORTABLE CART WARNING
ACCESSORIES
cord, use a polarized cord.
(symbol provided by RETAC)
Do not place this unit on an
unstable cart, stand, tripod,
12 POWER-CORD PROTECTION
bracket, or table. The unit may
Power-supply cords should be routed so that they
fall, causing serious injury to
are not likely to be walked on or pinched by items
a child or adult as well as serious damage to the
placed upon or against them, paying particular
unit. Use this unit only with a cart, stand , tripod,
attention to cords at plugs, convenience
bracket, or table recommended by the
receptacles, and the point where they exit from the
manufacturer.
unit.
8A
A unit and cart combination should be moved
3
13 LIGHTNING
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due
to lightning and power line surges.
14 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
15 OVERLOADING
Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.
16 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
Product information
Important Safeguards
Advantages of This Product Are .....
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to its normal
operation.
E. If the unit has been dropped or the cabinet has
been damaged.
F. When the unit exhibits a distinct change in
performance-this indicates a need for service.
21 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer can prevent fire, electric shock,
or other hazards.
22 SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.
17 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product. 23 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
18 DISC
ceiling only as recommended by the manufacturer.
Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
24 HEAT
serious personal injury and product malfunction.
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
19 SERVICING
other products (including amplifiers) that produce
Do not attempt to service this unit yourself as
heat.
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
25 To prevent battery electrolyte leakage, which may
servicing to qualified service personnel.
result in injury and damage to the unit or other
objects, observe the following precautions:
20 DAMAGE REQUIRING SERVICE
A. All batteries must be installed with the
Unplug this unit from the wall outlet and refer
proper polarity.
servicing to qualified service personnel under the
B. Do not mix new with old or used batteries.
following conditions.
C. Only use batteries of the same type and brand.
D. Remove the batteries when they are not to be
A. When the power-supply cord or plug is
used for a long period time.
damaged.
E. When the batteries have become discharged,
B. If liquid has been spilled, or objects have fallen
they must be disposed of in a safe manner
into the unit.
which complies with all applicable laws.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust
4
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
•
•
•
•
•
•
•
•
DVD, VCD, CD, CD-R(MP3), CD-RW, VHS
Watching DVD for recording broadcast
Integrated remote control (VCR, DVD)
VISS function
Multiplex sound playback/record
High Sound Quality of 6 head Hi-Fi
Simple record function
MP3/JPEG file playback function (CD-R
disc having records of MP3/JPEG files)
• Function to play DivX files (disc recorded
with the .avi,. divx format.)
(Some of the discs may not be played
according to a DivX version. )
• GUI (Graphical User Interface) through
OSD (On Screen Display)
By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD
player and disc, can be displayed on the TV
screen.
• Screensaver function (DVD)
• 3D sound (3D sound effect using 2 speakers)
• High bit / High sampling with 27MHz /
10bit video encoder
• High bit / High sampling with 96MHz /
24bit Audio D/A Converter
• Coaxial, Optical digital Audio output (PCM,
Dolby Digital, dts)
• Various TV aspect (DVD)
4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9
for Wide
• Repeat playback (title, chapter, and part for
DVD/ track, disc, and part for VCD/CD)
• Selective Play (DVD/VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.
• 4 languages OSD (On Screen Display)
function (DVD)
You can select and display OSD in 4 languages.
(English/ Russian/ Czech/ Hungarian)
• Parental Lock function (DVD)
This function can prevent playback of software
that may be unsuitable for children.
• Multi Audio function (DVD)
The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or VCD, it
depends on the disc. (The number of audio
languages depends on the software.)
• Multi Subtitle function (DVD)
The subtitle can be seem in up to 32 languages.
In the case of SVCD or VCD, it depends on the
disc. (The number of subtitle languages depends
on the software.)
• Multi Angle function (DVD)
You can enjoy high-level digital audio by
connecting with amp embedded with Dolby
This function allows you to choose the viewing
angle of scenes which were shot from a number
Digital / dts decoder.
of different angles. (The number of angles
• Built-in Dolby Digital decoder (DVD)
• Analog audio 2-channels output for
DOWNMIX (x1)
• Composite video output (x1)
• Slow Forward / Reverse playback (DVD)
• Fast Forward / Reverse playback
• Search of title, chapter, and time in DVD
disc, and search of time and track time in
VCD.
depends on the software.)
• Screen zoom function (DVD/VCD)
5
Cautions in use of DVD-Video player are described
below.
Please read carefully before using a DVD-Video player.
and maintenance every 1,000 hours of use by
technical engineers.
• For checking, contact your dealer or your
nearest service center.
Product information
Read Carefully before Using
Identification of Controls
Main body (front panel)
!
@
#
✔ Installation place and handling
✔
✔
✔
✔
✔ Checking and Replacement of Antenna
• When you place this player near other devices,
• Antenna is subject to change in its direction or
they may affect poorly together.
damage by wind and rain. For clean screen,
• When you place DVD-Video player and TV in
contact and consult your nearest service center
the upper and lower sides, it may cause
about checking and replacement.
flickering of pictures or failure (tape is not
✔ In recording important screen
ejected).
• Be sure to record the screen and check whether
• When you place this player near strong
recording is performed properly. We beg you
magnetic materials, it may affect image or voice
to understand compensation of recording if
poorly or damage recording.
recording is not performed by badness of used
• Do not spill volatile liquids like insect spray
tape or video.
over the player. Do not leave rubber or plastic
products in contact with the player for a long
✔ Copyright
time. They will cause deterioration or paint
• Do not use your recordings without permission
peel-off.
of a copyrighter except personal usage.
Not in use
✔ Tape and Disc Handling
• When the unit is not in use, be sure to remove
• Do not use any tape and disc below. Damage
the disc or tape and turn off the power.
of video head or cut/coiling of tape may cause
• If you do not use the unit for a long period,
failure.
remove batteries in remote control to prevent
Tape
with mold
leakage.
Tape
or disc stained with juice or attachments
• In case you don’t use the unit for a long time,
- Tape having breakage connection
the unit may not function properly in the
- Disassembled tape
future. Turn on and use the player occasionally.
- Disc with severe scratch
• Moisture condensation may occur in tape.
Moving
Moisture condensation damages the tape.
• Repack the unit as it was originally packed at
Please use the tape after the moisture
the factory. Alternatively, pack this product
condensation is disappeared.
with towel not to be damaged.
• After use, store tape vertically in a case to
• Eject any videotape.
prevent loose.
Cleaning
• Do not store the following places.
• Dust off dirt in cabinet or control panel part
- High temperature and humidity
smoothly with a soft cloth.
- Subject generation of mold
• For heavy dirt, soak the cloth in a weak
- Subject to direct sunlight
detergent solution, wring it well and wipe. Use
- Much dirt or dust
a dry cloth to wipe it out.
- Near strong magnetic materials such as speaker
• Follow instructions in using chemical cleaners.
• Do not use any type of solvent such as gasoline ✔ Video head cleaning
• Video head cleaning is needed when the
or benzene, as they may cause deterioration or
playback picture becomes unclear. Use an
paint peel-off.
equivalent high quality chemical non-abreasive
Checking
head cleaning tape or have them cleaned
• Video is a high precision device. To obtain a
professionally.
clear screen, we recommend regular inspection
6
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
$ %
^ & *
(
! POWER (STANDBY/ON) button
Use to power the device on/off if AC power supply
is connected.
@ Place to insert videotape
# Disc tray
$ VIDEO INPUT jack
% AUDIO INPUT jack
^ EJECT button
& RECORD button
* PR Down/Up button
( Operation Display Window
Display operation of device. For more information,
see “Operation Display Window” in 8P.
) SELECT button
Use to change DVD mode to VCR mode, and vice
versa.
) 12345
1 STOP button
Use to stop playing.
2 REWIND button
Use to rewind currently being played videotape or
disc; or to playback back rapidly.
3 Playback/PAUSE button
Playback videotape or disc.
Press this button to pause a screen.
4 FAST FORWARD button
Use to wind currently being played videotape or
disc; or to playback rapidly.
5 OPEN/CLOSE Tray button
7
Identification of Controls
Operation Display Window
Main body (Rear Panel)
@
!
- RECORDING MODE -
Product information
Identification of Controls
#$
^
- REPEAT MODE -
Timer Recording Standby
Repeat one chapter [DVD]
Repeat track [VCD, CD, DivX, MP3, JPG]
Timer Recording Error
Repeat title [DVD]
Repeat DISC [VCD, CD, DivX, MP3, JPG]
Repeat FOLDER [DivX, MP3, JPG]
Recording in Progress
Repeat a defined period
from A [DVD, VCD, CD]
Timer Recording in
Progress
Repeat a defined period
from A to B [DVD, VCD, CD]
*
! POWER CORD
It is a jack for supplying power to the unit.
Connect to outlet in a wall.
%
&
^ Connection to ANTENNA Cable
& Connection to TV
* EURO AV1 Jack
@ EURO AV2/DECODER Jack
# VIDEO OUTPUT Jack
$ AUDIO OUTPUT Jack
Recording Pause
% DIGITAL OUTPUT (OPTICAL/COAXIAL) Jack
- DVD OPERATION -
- VCR OPERATION -
DVD playback
VCR playback
Fast playback
Fast forward
Fast reverse playback
Rewinding
Slow playback
Fast playback (CUE)
Pause picture
Fast reverse playback
(REVIEW)
To enjoy sound quality of theatre level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
Slow playback
Still picture
Stop
Child Lock
8
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
9
Remote Control
!
[DVD] OPEN/CLOSE button, [VCR] EJECT button
@ VCR SELECT button
Accessories
Remote control
Product information
Identification of Controls
#
2 Batteries
Instruction
Manual
RF cable
• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,
instruction manual is not sold additionally.
Instructions in using REMOTE
Remote control battery installation
AAA
AAA
✔
button
@
9
0
“
#
#
$
%
!
Detach the battery cover on the rear of the
remote control, and insert two AAA
batteries with the + and - ends aligned
correctly.
)
1
2
3
4
5
6
7
8
$ SYSTEM button (This button is not available for this set)
% SETUP button
^
[DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel
&
[DVD] TITLE /PBC button
*
‘
[DVD] AUDIO LANGUAGE Select, [VCR] AUDIO Select
button
(
[DVD] SUBTITLE Select button
+
=
) REVERSE SEARCH button
^
&
*
(
• Operate remote control within 7m from the unit.
• Do not press 2(two) buttons at the same time.
• Do not light up sending and receiving part of remote control.
• Do not keep in the place with much dust and humidity.
[DVD, VCR] NUMBER button, [VCR] TRACKING -/+
Up/Down button
1 PLAY/PAUSE button
2
[DVD] PREVIOUS button (move into a previous chapter
or track)
Q
q
W
3
[VCR] Record SPEED button
4
[VCR] Record button
5
[VCR] TV/VCR button
w
E
e
R
r
T
t
Y
y
6
[DVD] 3D button
7
[VCR] CM SKIP
8
[VCR] Replay button
9 POWER button
0 DVD SELECT button
“
[VCR] INPUT Selection button
‘ CLEAR button
+
[DVD, VCR] OSD DISPLAY button
= OK/ENTER button
Two “AAA ”
batteries
(supplied).
Q
[DVD] MENU button
q
[DVD] Chapter/Title/Time SEARCH button
W
[DVD] ZOOM button
Child Lock !
w FORWARD SEARCH button
Press the power [ ] button of the remote for about
5 seconds. No buttons of front panel can be operated
now and Lock indicator (“
”) will be
displayed on window display. To release child lock,
press any button of the remote control.
E STOP button
POWER ON
Player will be POWER ON if any button of the
remote control is pressed.
e
[DVD] NEXT button (Move into a next chapter or track) ,
[VCR] Frame Advance button in pause mode
R
[DVD] REPEAT Playback button
r
[DVD] REPEAT a defined period from A to B button
T
[DVD] ANGLE button
t
[DVD] MARK button
Y
[VCR] PROGRAM button
y
[VCR] LAST CHANNEL button (Return to the previous
channel which was being watched.)
10
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
11
Setting up your player
■ Before you start, unplug all the equipment from the mains supply.
Connecting your player through
extra equipment (satellite system)
(Option 1) - Connecting your player through RF lead
■ Before you start, unplug all the equipment from the mains supply.
200-240V~,
50/60 Hz
Back view of your player
Installation
Television
(Option 1) - Connecting your player through RF lead
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
Television
Aerial
200-240V~,
50/60 Hz
Back view of your player
(Option 2) - Connecting your player through a scart lead
Television
Satellite
Aerial
200-240V~,
50/60 Hz
You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.
Scart lead (not supplied)
Back view of your player
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be
displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player with a scart lead.
12
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
13
Connecting your player to the Hi-Fi system
How to connect your player to another player
■ Before you start, unplug all the equipment from the mains supply.
■ Before you start, unplug all the equipment from the mains supply.
How to connect
Option 1
First player
Aerial
Hi-Fi
200-240V~,
50/60 Hz
Plug a phone cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 16.
Player
You can also use a scart lead to improve picture and sound quality from your player.
Installation
Television
200-240V~,
50/60 Hz
Second player
1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front
display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 17.
How to connect your player to a camcorder
■ Before you start, unplug all the equipment from the mains supply.
How to connect
Option 2
Television
Television
Hi-Fi
200-240V~,
50/60 Hz
Aerial
Aerial
Plug a scart to phone cable into
the “AV1” socket on the back
panel and into the audio socket
on any audio amplifier, if
needed.
200-240V~,
50/60 Hz
Camcorder
to
camcorder
Player
Scart Plug
to TV
Player
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 17.
You can also connect the camcorder by using a phone cable if your player has front input sockets.
Check the front of your player for this connection, see page 17.
14
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
15
Connecting Dolby Digital Amp with
Digital Audio Out Jack
2nd scart socket
2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 13-16.
2nd scart
Installation
How to connect
INPUT ONLY
REAR PANEL OF DVD-VIDEO
INPUT+OUTPUT
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 13. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
CONNECTING CABLE
(Not supplied)
To return to normal video use the other equipment must be turned off.
Recording from other Equipment.
(L) AUDIO IN (R)
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
Home Theater Receiver with Dolby Digital decoding capability
Front AV
1 Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital.
** If you want to know about “Dolby Digital”, please refer to [About DVD] in 55-57p.
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 15.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
16
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
17
Initial Installation
Setting time and date
■ Switch the TV on.
■ You can also start "AUTO SET" in the SETUP "PR PRESET" ➝ "AUTO SET".
■ To tune in new stations (manual tuning) and to enter station names see page 25-26.
Setting time and date
Setting up the player
■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Choose your language.
LANGUAGE SET
ENGLISH
PYCCKNz
ÔESKY
MAGYAR
PR+/-:SELECT
OK:CONFIRM
3
CZ: Czechoslovakia
H: Hungary
PL: Poland
RU: Russia
SK: Slovakia
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country.
5
PR+/-:SELECT
OK:CONFIRM
CLOCK SET
TIME 06:05
DATE 08/08/2004(SUN)
Store with [OK] button and exit with [SETUP] button.
0-9:SETUP (HOUR)
/➝:CORRECT
OK:CONFIRM
SETUP:END
SETUP:END
CH 25
RF OUTPUT SET
CURRENT
RECOMMENDED
CH 52
CH 54
0-9:SELECT(21-69)
OK:CONFIRM
SETUP:END
Press the [OK] button to confirm the recommended PR.
IMPORTANT!
Auto clock
Setting Auto clock
■ Auto Clock is only available for models with the VPS/PDC function (see page 27).
Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every
time you switch the video off at the mains. If you find that this time and date is incorrect you can remove
this feature by following the steps below changing it to OFF mode, you will then have to manually set the
time and date, see above.
PLEASE CHANGE THE TV
CH TO 54.
Else ...
exit the basic installation function and enjoy your player.
MANUAL SET
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
•
In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
PLEASE WAIT...
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 26.
DATE - - / - - /- - - 0-9:SETUP (HOUR)
/➝:CORRECT SETUP:END
2
COUNTRY SET
CZ
H
PL
RU
SK
OTHERS
SETUP:END
The player recommends the optimal RF OUTPUT CH number
automatically.
CLOCK SET
TIME - - : - -
SETUP:END
Clock is automatically set.
4
Call the player’s "SETUP",
choose "VCR SETUP", then "CLOCK SET".
Basic Operation
2
Then choose your country.
For selecting the country, refer to the followings.
1
➝
You should see this picture the first time you switch on the TV
and player.
➝
1
PR01
PR02
PR03
PR04
PR05
PR06
PR07
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR+/-:SELECT
OK:CONFIRM
18
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
AUTO CLOCK
ON
OFF
PR+/-:SELECT
OK:CONFIRM
SETUP:END
SETUP:END
19
OSD ON & OFF
DVD Playback
OSD (On Screen Display) ON & OFF
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it
to OFF mode.
1
SETUP
Call the player’s "SETUP".
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM
3
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
2
3
4
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM
Press [
] button to power on.
Press [DVD] button of REMOTE to change into DVD mode.
Press [OPEN/CLOSE] button to open the disc tray.
Place a disc firmly on the disc tray, making its label look upward.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.
Basic Operation
2
Choose “VCR SETUP”.
And press the [OK] button.
SETUP:END
1
To playback it, press [PLAY/PAUSE] button.
• In the case of DVD,
DVD menus and titles are displayed on TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is converted into PBC(Playback
Control) mode.
• In the case of CD, VCD1.1, MP3, DivX and JPG
the disc plays.
SETUP:END
Output Select
To Select DVD
Press [DVD] button.
If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.
5
6
To stop it, press [ ] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
Press [OPEN/CLOSE] button to remove the disc.
Various Playback Methods
To Select VCR
Press [VCR] button.
If VCR mode is correctly selected, DVD on the operation display
window goes out. Then, REMOTE button works as VCR function. Press
the [VCR] button, then it becomes to the VCR OPERATION mode.
To Select Watch Modes or External Input
√√] or [œ
œœ ]button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (reverse ) screen.
* This reverse playback can be unavailable for certain DVD.
√√] or [œ
œœ ] button in Pause mode.
■ If you want slow (or reverse) playback, press [√
You can watch the desired screen in the slow forward (reverse) playback.
* For the case of VCD and DivX, this reverse slow playback function is unavailable.
The
mark will appear.
■ If you want still picture, press [PAUSE] button in Playback mode. You can watch
the desired screen in Pause status.
Press [INPUT] button.
When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.
20
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
21
VCR Playback
Recording
To Record With VCR
Press [ ] button to power on.
Press [VCR] button of remote control to change into VCR mode.
4
To stop it, press [
5
Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
Insert the desired tape.
If you want to playback it, press [PLAY/PAUSE] button.
When the operational status is flickering or poor, adjust it with [TRACKING
+/-] button.
] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
control to remove the tape.
2
3
4
Various Playback Methods
√√] or [œ
œœ ] button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (rewinding) screen.
5
* NOTE: You might see no color noise band when you fast forward (or reverse)
playback the tape which is recorded in LP mode.
■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch
the desired screen in pause status.
6
√√] button in Pause mode. You can
■ If you want slow-motion playback, press [√
watch the desired screen in the slow forward playback.
If the product, which
has a auto-detector,
detects a contaminated
head(s), it shows the
conditions to notice the
contamination on
screen.
* In case of the notice
on screen, please rub
the heads with a headcleaner followed by
“How to use a headcleaner”.
1
* NOTE: VCR doesn’t have Slow Reverse Playback function.
■ If you want to watch a series of screens one by one, (FRAME ADVANCE) press
[NEXT √√❚ ] button in Pause mode. Each time you press this button, the picture
advances one frame.
■ If you press [REPLAY] button in playback mode, the player quickly rewinds 15
seconds of the tape and plays it.
■ If you press [CM SKIP] button in playback mode, the player quickly skips 30
seconds of the tape and plays it.
To Adjust Display
This product includes automatic Tracking function and enables users to enjoy clear
picture without an additional operation. Provided that the following problems can be
solved by the manual adjustment, which improves display quality. (During automatic
display adjustment, “Adjusting Display” are displayed on TV screen.)
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.
22
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
7
Press [ ] button to power on.
• Press [VCR] button of remote control to change into VCR mode.
Insert a recordable tape.
Insert a tape with recording tab.
Basic Operation
1
2
3
With [CHANNEL], [NUMBER] and [INPUT] buttons, select the desired
broadcasting channel or external input unit to record.
Select the desired speed (SP or LP) with [SPEED] button.
Press [REC] button.
Then, it starts recording.
If you want to pause recording, press [PAUSE] button.
After pressing [PAUSE] button, if the pause status continues for five minutes,
the recording is released automatically.
To exit recording, press [STOP] button.
To Enjoy a TV Channel or DVD during recording
1
2
If you want to playback DVD during recording with video, insert a DVD disc.
Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT
into DVD mode and press [PLAY] button. Then, you can watch DVD.
If you want to watch a TV channel during DVD recording with video, press
[VCR] button to convert OUTPUT into VCR mode and press [PR+/-] button.
Then , you can watch a TV channel.
23
Recording
Tuning in New Stations
2
3
Insert the desired DVD disc.
When it is a DVD disc with copy protect function, you can’t copy it.
Insert a recordable tape.
Press [REC] button during playing of DVD.
DVD plays and VCR starts recording.
If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the
same time.
If you press STOP [ ] button in VCR mode, VCR stops to record and DVD
continues to play.
One Touch timer Recording (OTR)
1
First, follow the steps 1 to 4 in “Recording With VCR”.
Press [REC] button as much as you want. See the “Recording Times Table”
below.
2
3
4
5
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
MANUAL SET
PR01
PR02
PR03
PR04
PR05
PR06
PR07
Choose any unused location number "----" or "P-xx" ...
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR08
PR09
PR10
PR11
PR12
PR13
PR14
Set the station you want:
• the programme location number;
• the proper broadcaft system for your location (BG or DK)
• the broadcast system you want (Aerial(CH) or
Cable(CC)),
• You can directly enter the real channel number with the
œ /√
√],
[0 to 9] buttons, or search by pressing [œ
• The fine tuning you can adjust,
• When the program is encoded (and you have a decoder
œ or √] to
connected to socket EURO AV2), press the [œ
select ON or OFF.
• Change or create the station name.
Once you see the station you want, store it.
Tune in further stations (from step 3 onwards) or exit
tuning mode.
P-08
P-09
P-10
P-11
----------
SETUP:END
MANUAL SET
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
It's simplest to use the same location number on both the
TV and video.
... and confirm.
21
recording for 10 hours
22
returning to the status of Once Press
To stop Recording mode, press [STOP] button more than 5 seconds.
24
Select "MANUAL SET".
SETUP:END
PR+/-:SELECT
OK:CONFIRM
Once
continuous recording until you press STOP button
Twice recording for 30 mins from current time
3 (times) recording for 1 hour
3
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM
■ When your urgent business happens suddenly in watching TV or you want to record the current TV
program for the desired time, follow the procedures below.
1
2
To complete the set-up of your video recorder when the
auto set has not stored all of the channels or when you wish
to store a new channel.
Call the video’s "SETUP", choose "PR PRESET".
VCR Operation
“This product incorporates copyright protection technology that is protected by
U.S patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision,
and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.”
Tuning
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
04
BG
AERIAL
CH_ _
ON
____
SETUP:END
MANUAL SET
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
➝
1
■ The TV and player are switched on.
■ To see the picture from your player, press the input or AV (Audio/Video) button on the TV.
➝
To Copy From DVD To Videotape
03
BG
AERIAL
CH 03
ON
____
SETUP:END
MANUAL SET
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
03
BG
AERIAL
CH 03
ON
____
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
25
Tuning in New Stations
Timer Recording
■ For timer recordings, clock, date, and stations must be set correctly.
■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
■ If your player is showing no station name or is showing a station name incorrectly, you can correct
this.
1
2
MANUAL SET
Call this menu (just see the previous page),
if it isn't displayed.
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
Either select the name from the stored list or you
create the station name and enter a 4-digit name.
Change the letters with the [PR +/–] buttons,
œ /√
√] buttons.
move to the next letter with the [œ
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
03
BG
AERIAL
CH 03
ON
____
Timer recording using ShowView
1
Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...
MANUAL SET
03
BG
AERIAL
CH 03
ON
____
From your TV magazine, type in the number next to the
programme you want to record ...
... and confirm.
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
Call the ShowView menu by pressing PROGRAM on the
remote control.
2
SHOWVIEW
83077---0-9:SHOWVIEW NUMBER
:CORRECT
OK:CONFIRM
SETUP:END
➝
Station names
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
... and confirm.
PR+/-:SELECT
OK:CONFIRM
PR+/-: SELECT CHARACTER
/➝ : SELECT POSITION
OK:CONFIRM
SETUP:END
SETUP:END
➝
PR+/-:SELECT
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
Sorting programme locations
3
If you wish to make changes:
œ/√
√]
Move to the position you want to change using the [œ
buttons.
…/†
†] or [number] buttons. If all
Change the setting using the […
setting are ok, press [OK], till you see “OK: CONFIRM” in the
bottom line.
Confirm.
TIMER PROGRAM (ONCE)
PR
03
START TIME
21:20
END TIME
22:20
START DATE
14/08(SAT)
TAPE SPEED
SP
VPS/PDC
ON
PR+/-:SELECT (AV1/AV2)
0-9 : SETUP (PR)
/➝ :CORRECT
OK:CONFIRM
SETUP:END
VCR Operation
3
PR01 ARD
PR02 ZDF
PR03 P-03
PR04 P-04
PR05 MTV
PR06 P-06
PR07 P-07
➝
MANUAL SET
Store and exit.
Switch your player off.
If the location numbers used for programmes stored in your TV and player are different, you can change them on
the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
2
Call the player’s "SETUP",
choose "PR PRESET" then "PR ALIGN".
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
PR01ARD
PR02 ZDF
PR03 P-03
PR04 P-04
PR05 MTV
PR06 P-06
PR07 P-07
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
➝
1
PR ALIGN
SETUP:END
Clearing programme locations
2
Call the player’s "SETUP",
choose "PR PRESET" then "PR ERASE".
PR01
PR02
PR03
PR04
PR05
PR06
PR07
Select the station (location number) you want to clear.
œ ] button.
Review the picture by pressing [œ
PR ERASE
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR+/-:SELECT
:PR VIEW
OK:ERASE
➝
1
Clear by pressing OK button.
26
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
• VPS/PDC is a service provided by some stations to enable you to perform timer recordings
precisely even if the broadcaster delays the start time of the programme slightly. The time you
enter is the VPS/PDC time so must be correct. Not all stations offer VPS/PDC, in which case the
player will start at the time you enter and not the actual start time of the programme.
If you wish to start recording at a specific time without it being adjusted by the VPS/PDC
system in the event of a delay, switch VPS/PDC off otherwise the player will not record.
• If you don’t have the ShowView numbers see next page for the normal timer.
œ ] button and change
• If you have made a mistake, move back to the relevant position with the [œ
the setting.
• If there is no programme location displayed under “PR” in the change menu, the player doesn’t
yet know the location number for the programme you want. Type it in and this will be stored
for last recordings.
• If you wish to record from a satellite receiver, select under “PR” the satellite programme
location or AV (1/2) (depending on the connection with the antenna cable or the SCART-cable).
Leave the satellite tuner switched on and to the programme you want.
• Should programming overlap, you get a warning.
• To cancel the recording press the button (stop) more than 5 seconds.
• ShowView is a trademark applied for by Gemstar Development Corp.. The ShowView system is
manufactured under license from Gemstar Development Corporation.
27
Timer Recording
Timer Recording
■ For timer recordings, clock, date, and stations must be set correctly.
■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
Normal timer recording
PR+/-:SELECT
OK:CONFIRM
If you wish to make changes:
œ/√
√]
Move to the position you want to change using the [œ
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
œ or √ ], till you see “OK :
If all setting are ok, press [œ
CONFIRM” in the bottom line.
Confirm.
TIMER PROGRAM (ONCE)
PR
-START TIME
--:-END TIME
--:-START DATE
--/-TAPE SPEED
SP
VPS/PDC
ON
PR+/-:SELECT(AV1/AV2)
0-9 :SETUP(PR)
/➝:CORRECT SETUP:END
TIMER PROGRAM (ONCE)
PR
01
START TIME
18:10
END TIME
20:30
START DATE
22/08(FRI)
TAPE SPEED
LP
VPS/PDC
ON
PR+/-:SELECT(AV1/AV2)
0-9 : SETUP (PR)
/➝ :CORRECT
OK:CONFIRM
SETUP:END
TIMER PROGRAM
PR
03
START END DATE
21:20 22:20 16/08
01
-------
18:10
-- : --- : --- : --- : --- : --- : --
PR+/-:SELECT
OK:CONFIRM
2
Select the programming to change or erase.
If you want to erase this programming press
button [0], confirm with OK.
If you wish to make changes:
Move to the position you want to change using the
œ /√
√] buttons.
[œ
Change the settings using the [PR +/–] or
[number] buttons.
œ or √], until you see
If all settings are ok, press [œ
"OK: CONFIRM" in the bottom line.
Confirm changes with [OK]. Exit the menus.
20:30
-- : --- : --- : --- : --- : --- : --
22/08
-- / --- / --- / --- / --- / --- / --
SETUP:END
TIMER PROGRAM (ONCE)
PR
START TIME
END TIME
START DATE
TAPE SPEED
VPS/PDC
03
21:20
22:20
16/08(SAT)
SP
ON
0 :ERASE
/➝:CORRECT SETUP:END
➝
Type in one after the other:
• The programme location number;
• the time the broadcast starts,
• the time the broadcast ends,
• the day of the broadcast, if it is not today.
• Select LP if you wish to make a very long recording .
• Switch off VPS/PDC here if you need to .
SETUP:END
1
Call the player’s "SETUP",
choose "TIMER PROGRAM".
VCR Operation
3
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
➝
2
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
➝
1
Call the player’s "SETUP", choose "TIMER PROGRAM".
Decide if you want to record "ONCE", "WEEKLY" or
"DAILY"...
... and confirm.
Timer Review – changing and erasing
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
œ/√
√] buttons
• If you have made a mistake, move to the position you want to change using the [œ
and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don’t adjust
the times, the machine will record the first programme completely then continue with the
second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to “LP” for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• In case the player is powered on after setting of timer recording, the player cannot record in
VCR mode but can record in DVD mode.
28
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
29
More Functions
More Functions
■ The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
REW SP
GO TO ZERO
Clock / counter display
STOP SP
Each time you press [DISPLAY] button,
1x: Time and date+current status ➝ Time and date
2x: Counter+current status ➝ counter
3x: disappear.
PR01 ARD
STEREO ON
Resetting the counter to zero
COUNTER RESET
0:02:13
Reset the counter.
14:00 10/08 V E180 00:48
0:00:00
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button
to display the VPS/PDC icon.
16 : 9 Wide Screen Format Playing back / Recording
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM
SETUP:END
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM
SETUP:END
E-240 01:27
Call the player’s "SETUP",
choose "TAPE CONTROL"
• Remaining time display is
only possible when the
cassette is loaded.
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
You can play and record the program of 16:9 Wide-Screen format with this player .
• 16:9 Set
-Auto : This video automatically detects the program format (16:9 or 4:3) and
records or plays this program in the same format.
-ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will
be converted to 16:9 format.
-OFF : The video will play or record all broadcasts in 4:3 format only.
• If you watch a program which is recorded by 16:9 wide screen format with
this player, your TV must have 16:9 wide screen function and you have to
connect TV and player with the A/V scart.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
VCR Operation
Remaining time and cassette length
16:9 SET
AUTO
OFF
ON
PR+/-:SELECT
OK:CONFIRM
SETUP:END
AUTO REPEAT
If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays
repeatedly the tape from the beginning to end parts.
Searching a recorded program with index
To release this mode, press the [
When you record a program, the VCR places an index mark at the start of
the recording.
To search fo an index mark
1. Call the player’s "SETUP", choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEXPR+/- :SELECT
OK:CONFIRM
SETUP:END
SETUP languages
Call the player’s "SETUP", choose
"VCR SETUP", then "LANGUAGE SET".
Select your language.
Confirm.
30
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
] button or mode operation button. (PLAY, FF, REW or STOP)
LANGUAGE SET
ENGLISH
PYCCKNz
ÔESKY
MAGYAR
PR+/-:SELECT
OK:CONFIRM
SETUP:END
31
More Functions
More Functions
■ The player machine records the complete sound signal transmitted by the TV station.
■ On the mono VCR, you will hear the normal mono sound.
Child lock
The Hi-Fi system
Press the [ ] button for about 5 seconds.
No buttons of front panel can be operated now and LOCK INDICATOR (“
”)
will be displayed on window display. Keep your remote control in a safe place.
To release child lock, press any button of the remote control.
Cassettes
PAL
and ...
Dimmer : Your player dims its display when switched to stand-by mode.
Auto power off : Your player switches to stand-by when no tape is played and no station is received for more
than 5 minutes.
This means you can enjoy
• films with excellent stereo sound
• films of full-length concerts in high quality stereo
• films with impressive Surround Sound using additional Surround equipment
• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track
• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound
What you can listen to
During Stop, the player displays what the current station is broadcasting. When
you switch to another station or the current station changes the sound mode, your
player displays the programme and sound mode on screen (if not, press AUDIO).
• “STEREO” = stereo
“BIL I / BIL II ”=bilingual
nothing= monaural sound
During Playback, the player displays what is recorded on
the cassette (if not, press AUDIO).
• “Hi-Fi” = stereo/bilingual
nothing = monaural sound
STOP SP
PR10 EURO
STEREO ON
VCR Operation
Use only good quality tape cassettes with the VHS logo.
•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loud speakers and computer monitors, for example).
•Always wind the tape to the beginning when you have finished. Store with the full
spool at the bottom and with the cassette in its cover.
You can protect your precious recordings from being wiped by breaking out the safety
tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use
the tape after removing the tab, cover the hole with adhesive tape.
In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a
high-quality Hi-Fi sound system.
PLAY
SP
Hi-Fi
L+R
Choice of sound output
During a stereo performance (playback-”Hi-Fi”/ broadcast
- “STEREO”):
Hi-Fi stereo ➝ left audio channel only ➝ right channel
only ➝ the normal mono sound track of a Hi-Fi cassette
• During broadcasting a bilingual performance : Main
language (original sound track) ➝ sub-language
(dubbed) ➝ both main language and sub-language ➝
OFF.
• For mono performances , there is no choice available.
32
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
PLAY
SP
Hi-Fi
L+R
HI-Fi
LEFT
Hi-Fi
RIGHT
Hi-Fi
OFF
STOP SP
PR10 EURO
BIL
I
BIL
II
BIL
I+II
BIL
OFF
33
Connections and Copying
Connections and Copying
■ If you are using a SCART cable, select the AV input on the TV to see the picture from the player.
■ If you are not using a SCART cable, select the button number on the TV reserved for video input to
see the picture from the player.
■ Switch off all components when connecting or disconnecting cables.
Copying
To copy to your player from another video
machine, connect the two machines with a cable
between their EURO AV (SCART) sockets and
select as programme "AV 1/AV 2" or “F. AV”
(front sockets) using the [AV], [PR+/-] or [INPUT]
button.
Set the other video machine to playback and your
machine to record.
•To connect a mono audio source, use the front
Audio In socket marked L.
To the TV via antenna cable (if you are not using a SCART cable)
If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial
cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to
ensure the best pictures and sound.
1
Other VCR
Decoder for Pay-TV
Camcorder
Video Player
Satellite Receiver
TV
(other VCR)
• If the quality of the test picture transmitted to the TV is poor due to
interference caused by a station transmitting on channel 52, you can tune
the player to a different transmitting channel. Find a free channel
between 21 and 69 on your TV.
Call the player’s "SETUP" choose "VCR SETUP" then "RF
OUTPUT SET".
RF OUTPUT SET
CH
SYSTEM
52
BG DK
0-9:SELECT (21-69)
/➝ :SELECT (BG/DK)
OK:CONFIRM
SETUP:END
➝
2
Audio Amp.
devices
To copy to another video machine from your
player, connect the two machines by means of
their EURO AV (SCART) sockets.
On the other video, select its AV input and set the
machine to record.
Switch your player to play back at the position you
want copying to start.
VCR Operation
Once you have carried out the steps in "Connecting up the player" , switch
on your TV.
Press the [ENTER] button of the player’s remote control longer than 5
seconds to call the player´s test picture.
Tune the TV to the test picture using the channel pre-set functions of your
TV as described in its manual.
When you have found the test picture, store it under the button number on
your TV for player input.
Press the [ENTER] button of the player’s remote control again longer than
5 seconds to release the test picture.
Type in the free channel.
Assembling
Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique
for smooth edit points:
Store and exit.
• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may
help (refer to the TV manual).
• Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.
• The symbol is lit in VCR mode and goes out in TV
mode.
• This symbol means the cassette is in.
• This symbol means a timer recording is setting.
For the best results, the source cassette from which
you are recording should already be playing back
when you start recording.
34
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
35
Playing desired scene
Playing a desired scene
- DVD -
- VCD/CD TRACK
- DivX/MP3/JPEG TRACK
➝
➝
TITLE
➝
CHAPTER
➝
Press [❚œœPREV] button.
The current scene moves to the previous chapter (or track) or first scene of current
chapter (or track).
Each time you press [REPEAT] button in playback mode, repeat playback starts as below.
➝
To move to next chapter (or track), press [√√❚ NEXT] button.
The current chapter (or track) moves to the next chapter (or track).
Repeating a defined period
DISC
FOLDER
➝
OFF
➝
➝
OFF
➝
To skip scenes in a disc
DISC
➝
OFF
•
•
•
•
•
•
Directly moving to a desired title
■ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE/PBC] or
[MENU] button can be used to select the movie title. Details of operation may differ depending on the disc used.
* Selecting a title may not be available on certain DVD discs.
2
Press the [TITLE/PBC] or [MENU] button.
A list of the titles on the disc is displayed.
* For the case of VCD disc, menu screen will
appear only when the disc has PBC function
and PBC ON is activated.
Press the [ENTER] button or [PLAY] button
after pressing the [œ √…†] button to select
the desired title.
For the case of VCD disc, press the [Number]
button.
The selected title now starts playing.
* For the case of VCD disc, repeat playback starts only in PBC OFF mode.
Repeating a defined period from A to B
■ You may repeat a defined period from A to B.
A MP3 disc may
not be repeated
from A to B.
1
2
3
36
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
DVD Operation
1
CHAPTER : Current chapter will play repeatedly.
TITLE : Current title will play repeatedly.
TRACK : Current track will play repeatedly.
DISC : Current disc will play repeatedly.
FOLDER : Current folder will be played repeatedly.
OFF : Repeat playback will be cancelled.
At the point where you want to start the repeat
playback, press [A-B] button.
The right figure appears and repeat playback start
position (A) is set.
At the point where you want to end the repeat
playback, press [A-B] button again.
REPEAT A-
REPEAT A-B
The repeat playback end position (B) is set and a
defined period from A to B is playback repeatedly.
To exit from repeat playback mode, press [A-B]
button.
It enters into Normal Playback mode.
OFF
37
Playing desired scene
Playing desired scene
If you want to search with a time, press
[SEARCH] button three times.
Please enter the new time to be searched using the
[NUMBER] buttons.
In completing entering, please press [ENTER]
button.
PLAY starts from the selected position.
➟
1
total title
number
If you want to search with a track number, press
[SEARCH] button one time.
current track
number
In case of PBC OFF, the screen like the right figure
appears. It shows current and total track
numbers. Please enter the new track number to
be searched using the [NUMBER] button.
001/013
➟
3
total track
number
* If it is PBC ON, pressing track number converts PBC
to OFF mode automatically.
current chapter
number
➟
If you want to search with a chapter number,
press [SEARCH] button twice.
It shows current and total chapter numbers.
Please enter the new chapter number to be searched
using the [NUMBER] buttons.
current title
number
001/003
001/023
➟
2
If you want to search with a title number, press
[SEARCH] button one time.
It shows current and total title numbers. Please enter
the new title number to be searched using the
[NUMBER] buttons.
➟
1
Searching VCD with a track or track time
➟
Searching DVD with a title number, a chapter number or a time
total chapter
number
2
_ _ :_ _ :_ _
If you want to search with a track time, press
[SEARCH] button twice.
In case of PBC OFF, the screen like the right figure
appears.
It shows total track time.
Please enter the new time to be searched using the
[NUMBER] button.
_ _ :_ _
In completing entering, please press [ENTER].
PLAY starts from the selected position.
DVD Operation
Storing markers in memory to be viewed (listened to) again
■ Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to
quickly return to any point on the disc.
38
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
1
Storing a marker in the memory.
2
Recalling/Clearing a marker
Press [MARK] during play and press [ENTER]
at the starting point to be viewed (listened to)
again.
Press [MARK] during playback. Press [œ √] to
select the marker to be recalled/cleared.
Press [PLAY] to recall a marker. Or press
[CLEAR] to clear a marker.
Play resumes from the point corresponding to
the selected marker, or the selected marker is
cleared.
-
-
-
OK
1
-
-
CLEAR
39
Confirming the current PLAY mode on screen
Confirming the current PLAY mode on screen
Confirming the current DVD disc mode
While in playing, press [DISPLAY] button.
It shows the current disc mode.
If you want to change the mode, select the item with up/down (…†) cursor and enter
the new settings with [number], [œ] or [√] button. In completing entering, press
[ENTER] button.
To exit from Display mode, press [DISPLAY] button again.
Confirming the current VCD and DivX disc mode
While in playing, press [DISPLAY] button.
It shows the current disc mode.
If you want to change the mode, select the item with up/down (…†) cursor and enter
the new settings with [number], [œ] or [√] button. In completing entering, press
[ENTER] button.
To exit from Display mode, press [DISPLAY] button again.
001/001
001/002
001/001
00:02:04
01/06 ENG
01/06
ENG
OFF
01/04
0~9
➟
➟
➟
➟
➟
➟
➟
current title / total title
current chapter / total chapter
time elapsed
current subtitle / total subtitle / subtitle selected
current audio / total audio / audio language selected
repeat playback mode
current angle / total angle
ENTER
00:00:02
OFF
ON
0~9
➟
➟
➟
➟
current track / total track number
time elapsed
repeat playback mode
PBC mode
ENTER
- VCD DISC 00:08:05
01/01
01/01
0~9
➟ time elapsed
➟ current subtitle / total subtitle
➟ current audio/ total audio
ENTER
- DivX DISC -
DVD Operation
40
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
41
Selecting an AUDIO language,
SUBTITLE language and 3D AUDIO
Selecting ZOOM and Multi Angle
Using a zoom function
■ The user can enlarge the current screen about 0.25 or 3 times.
Selecting an audio language
Keep pressing [ZOOM] button till the preferred zoom appears.
■ The user may select an audio language and subtitle language if a disc includes Multi-language.
A magnification ratio of display is increased or decreased by one step in order
upon pressing the [ZOOM] button.
A certain disc
may not support audio
select or subtitle select.
Keep pressing [AUDIO] button till the user’s preferred language appears in
playback mode.
If DVD disc includes audio information, every time the user presses [AUDIO] button,
English (ENG), French (FRE), Spanish (SPA) and others appear one by one.
01/06
A base point to be enlarged is centre and the point can be changed with the operation of
[œ √…†] button.
5.1CH ENG
Selecting a subtitle language
• DVD/VCD : 1.5 times (X1.5) ➝ 2 times (X2) ➝ 3 times (X3) ➝ OFF.
Keep pressing [SUBTITLE] button till the user’s preferred language appears in
playback mode.
If a DVD disc includes subtitle information, every time the user presses [SUBTITLE]
button, English (ENG), French (FRE), Spanish (SPA), ... and OFF appear one by one.
SUBTITLE
01/06 ENG
Different Angle
■ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited
to a DVD disc supporting multi angle information.
■ You can enjoy a virtual 3D sound effect from 2-channel sources.
Press [3D].
Every time you press [3D], the 3D sound toggles
between 3D ON › 3D OFF.
42
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
When playing JPG, it can be displayed in various directions by using [œ √…†]
button.
[œ √ ] : Rotate 90 degrees to clock wise or counter clock wise.
[…†]: Turn over the screen by 180 degrees horizontally or vertically.
DVD Operation
Selecting 3D Audio
• DivX : 2 times (X2) ➝ OFF.
• JPEG : 0.25 times (X0.25) ➝ 0.5 times (X0.5) ➝ 1 times (X1) ➝ 1.5 times (X1.5) ➝2
times (X2).
3D ON
3D OFF
Keep pressing [ANGLE] button till the preferred
angle appears.
Every time the user presses [ANGLE] button, an angle
degrees changes in a consecutive order.
3/4
43
About MP3, JPG and DivX® discs
About MP3, JPG and DivX® discs
Playing a disc containing MP3 or JPG files
■ Recognizing range for a MP3 disc is stated below.
You will play a MP3 file or a JPG file recorded in disc.
1
Press the [OPEN/CLOSE] button to open the disc tray.
Put a MP3 disc on the disc tray with the label side up.
Press the [OPEN/CLOSE] button to close the disc tray.
It will take some time to recognize a disc and to show up the directory structure.
• The maximum number of directories should not exceed 32.
• The maximum depth level of directories should not exceed 4.
• It may break of a sound while playing for a file in which it was recorded with a variable
bit rate(VBR) from low bit rate to high bit rate (Ex.:64~256kbps) in itself.
• A file name must be composed with not exceeding 24 characters and figures and
the extension must be MP3.
■ Recognizing range for a JPG disc is stated below.
2
It will display MEDIA PLAYER.
MP3
JPG
MEDIA PLAYER
0
1
2
3
4
5
6
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
MEDIA PLAYER
Total : 10
Length : 03:51
0
1
2
3
4
5
6
Total : 11
Res. : 1024x768
9268-2
AAFALLROAD12
ALL_NITE
AMEILEENDONA
AMFUNKYFLOWE
AMPOPPIESDAI
00:00:02
/MP3 - 10 FI/ARTIST - TRACK 01.MP3
Select a file or folder to play.
Select a desired folder or file by pressing the […†] button and then press on
the [ENTER] button. It will select or play the file or folder selected.
Cautions upon a use of MP3, JPG disc.
• Try to avoid the use the CD-RW(Rewritable) disc if possible because it can not be
played back according to the recording format.
• The CD-R must be recorded with the standard format because it can not be played
back according to the recording format.
• The CD-R should be written using the ‘disc at once’ method.
• The disc which is made with ISO 9660 format can be played back.
DVD Operation
3
/JPEG FILES /9268-2.JPG
• File name is ****.jpg which is composed with characters and figures.
• Some of JPG files may become not only slow to play but also impossible to play
since the capacities are too large.
• The state or saving method of a disc may cause not to play it.
■ Play or pause
√ /❚❚] button.
It will change into Play or Pause while pressing the [√
■ SEARCH
The [SEARCH] button does not run in a disc of DivX, CD, MP3, or JPG.
■ STOP
The [STOP] button.
■ Pass over to a next or previous file.
• When you press the [√√❚ NEXT] button on the remote control, it will move on
the first part of a next file and start to play it. And it will continue to move on the
first part of a next file and play it upon pressing the button.
• When you press the [Previous ❚ œœ] button on the remote control, it will move
on the first part of a previous file and start to play it. And it will continue to move
on the first part of a previous file and play it upon pressing the button.
44
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
45
About MP3, JPG and DivX® discs
About MP3, JPG and DivX® discs
Playing a disc containing DivX® files
1
2
3
4
Insert a DivX disc.
Press the [Open/Close] button
and then it will open the disc
compartment.
Insert a DivX disc into the disc
compartment while putting the
playing side downward and
then it will display MEDIA
PLAYER.
MEDIA PLAYER
0
1
2
3
ROOT
ETHE ADVENTU
HTHE ADVENTU
THE ADVENTUR
Total : 3
Length : 01:31:51
00:00:05
/THE ADVENTURES OF ROCKY.AVI
After selecting a desired folder by pressing the […†] button, press the
[OK/ENTER] button.
After selecting a desired track by pressing the […†] button, press the
√ /❚❚] button or the [OK/ENTER] button.
[√
Press the [■ ] button when you want to stop playing.
• It will return to the display of MEDIA PLAYER.
• When the frame number of screens per a second is more than 30, it may not play it
normally.
• It will not support a DivX file coded with ‘dts'.
• It will not support GMC or Q-Pel(Quarter Pixel).
• It will not support Q-Pel (Quarter Pixel).
• It will be available to play a file with a resolution size will be below 720 x 576
(width x length) pixels only.
• If it has a code unable to display, it will display the mark of (_).
• A file name of DivX subtitles must be made with up to English 20 characters only.
• A file of DivX subtitles only supports a file named with the extensions of .smi,
.srt, or .sub.
• The subtitles will not be displayed if the file capacity of subtitles will exceed
250KB.
The language of subtitle is English, French, Spanish, German, Italian and
Dutch only.
DVD Operation
• When the subtitles are not displayed provided although it has a file of subtitles:
1. Move to the display of MEDIA PLAYER by pressing the [Stop] button.
2. Place the cursor on a file of subtitles you want by using it.
3. Select the file of subtitles at that time by pressing the [SUBTITLE] button.
4. After moving the file of subtitles on the DivX file by using the cursor, play it by
pressing the [OK/ENTER] button.
■ DivX® video technology, often called the “MP3 of video”, enables large
video files like DVDs or home videos to be converted to a fraction of the
size.
• Types of playable DivX files : ".avi", ".divx", “.mpg”, “.mpeg”
• Types of playable Codec formats : MP42, MP43, DIV2, DIV3, DIV4, DIV5,
DIV6, DX45, DX50, DXSB, RMP4, XVID
• It may not be played according to a type of DivX files, a recording method, or a
disc state. (The device was authenticated for DivX files from the DivX Networks,
Inc. and it is available for playing a normal DivX file but may be unavailable for
playing the DivX files that have been manufactured with an illegal or abnormal
Codec.)
• When the image / sound structure of a recorded file have not been undergone the
interleave, it will output either the image or the sound.
46
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
• DivX, DivX Certified and associated logos are trademarks of DivXNetworks,
Inc. and are used under license.
47
Displaying menus in a disc
Language Setup
■ A user can set OSD language, Audio, Subtitle and Disc Menu.
To display menus in a disc
■ If a disc includes menus, the user may use them.
1
Press [MENU] button.
• In case of a DVD disc, it shows menus in the disc. Also they are different
according to discs.
• If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.
“OSD” means
“On Screen Display”.
While STOP, press [SETUP] button.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER
* CD and VCD1.1 do not support the function.
2
1
2
If it is a DVD disc, move a cursor to a relative item with arrow buttons of [œ
√…†] button and select one with [ENTER] button or [PLAY] button.
Selecting a OSD language.
Select a OSD language to be displayed on
DVD menus with [ENTER].
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER
3
In case a disc
does not include
setting languages
information, the
selected language does
not appear.
Selecting Audio language.
Set your preferred audio language with
[ENTER]. If the audio language is set and
recorded on the DISC, it is automatically
played in the set language every time it is
played.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER
OTHERS - - - - : Another language can be
selected. You can input 4-digit language
code.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
Refer to the language codes on next page. Press
[CLEAR] if an incorrect language code is entered.
ENTER
4
Selecting Subtitle language.
Set your preferred subtitle with [ENTER].
If the subtitle language is set and recorded
on the DISC, it is automatically played in
the set language every time it is played.
Refer to the language codes on next page. Press
[CLEAR] if an incorrect language code is entered.
ENTER
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER
48
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
SETUP
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DUTCH
✓
SETUP
GERMAN
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
SETUP
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
OTHERS
SETUP
GERMAN
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
OFF
✓
Setup
OTHERS - - - - : Another language can be
selected. You can input 4-digit language
code.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENGLISH
AUTO
OFF
AUTO
SETUP
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
OFF
✓
OTHERS
SETUP
49
Language Setup
Video Setup
■ A user can set up a connected TV condition and screen.
5
Selecting Disc Menu language.
Set your preferred DISC MENU language with
[ENTER]. If the DISC MENU language is set and
recorded on the DISC, it is automatically played
in the set language every time it is played.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
GERMAN
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
ENTER
OTHERS - - - - : Another language can be
selected. You can input 4-digit language code.
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
Refer to the language codes. Press [CLEAR] if an
incorrect language code is entered.
1
ENTER
2
Language
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Code
7789
7865
7869
7876
7879
7982
8065
8076
8083
8084
8185
8277
8279
8285
8365
8368
8372
8373
8375
8376
8377
8378
8379
8381
8382
Language
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sansrit
Sindhi
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Code
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
50
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
TV ASPECT
DivX(R) REG.
SETUP
4 : 3 PS
4 : 3 LB
✓
16 : 9 WIDE
Language
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
3
DivX® REG.
Please use this code to register this player with
the DivX® Video On Demand service.
This will allow you rent and purchase video
using the DivX® Video On Demand format.
To learn more go to www. divx.com/vod.
Your Registration Code is : ********.
ENTER
TV ASPECT
DivX(R) REG.
SETUP
4 : 3 LB
Please use this code to register this player
with the DivX(R) Video On Demand service.
this will allow you to rent and purchase video
using the DivX(R) Video On Demand format.
To learn more go to www.divx.com/vod.
Your Registeration Code is: JFF7ZBJE
ENTER
SETUP
Setup
Code
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
Selecting TV Aspect.
Set your preferred TV ASPECT ratio with
[ENTER] button.
If a user selects “4:3 PS”, the user can watch
only a center of the original scene of “16:9”. If a
user selects “4:3 LB”, the user can watch the
original scene of “16:9”, but the top and bottom
of the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user
sets a size as “16:9 Wide”.
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE”
and/or “DISC MENU”.
Code Language
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
4 : 3 LB
SETUP
Table of language and Their Abbreviations
Language
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali;Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
TV ASPECT
DivX(R) REG.
SETUP
SPANISH
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
OTHERS
ENTER
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
While STOP, press [SETUP] button.
51
Audio Setup
Others Setup
■ A user may select audio menu according to a user’s speaker set.
1
While STOP or Resume STOP, press
[SETUP] button.
DIGITAL OUT
BITSTREAM
DYNAMIC RANGE OFF
1
While STOP or RESUME STOP, press [SETUP]
button.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
ON
ON
RESET
8 ADULT
ENTER
ENTER
2
Select a Digital Output.
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
3
Select a Dynamic Range.
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
SETUP
SETUP
DIGITAL OUT
BITSTREAM ✓
DYNAMIC RANGE LPCM
2
Select character display window.
Select "On" to make OSD (On Screen Display)
language displayed in screen.
ENTER
ENTER
SETUP
✓
DIGITAL OUT
OFF
DYNAMIC RANGE FULL
ENTER
3
SETUP
4
Select screensaver.
If bright scenes continue to be displayed in
screen, TV can be damaged. Set the screensaver
to "On", the screensaver functions automatically
and DVD logo moves continuously if the resume
stop, stop, open status is maintained for about 5
minutes.
Restoring DEFAULTS.
This feature resets every function to its
original Factory Defaults except the Parental
Control settings.
SETUP
✓
OSD
ON
SCREEN SAVER OFF
DEFAULTS
PARENTAL
ENTER
SETUP
OSD
RESET
SCREEN SAVER
DEFAULTS
PARENTAL
ENTER
5
✓
OSD
ON
SCREEN SAVER OFF
DEFAULTS
PARENTAL
SETUP
Select Parental.
Press [√] button when the cursor is located in
PARENTAL.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
ON
ON
RESET
8 ADULT
ENTER
Change Parental Rating level.
Once you have entered the correct
password, you can change the PARENTAL
rating by pressing […†]. And confirm it
with [ENTER].
These 8 levels of parental control, protect
children from watching violence, sexual
scenes and other objectionable material.
52
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
CHANGE PASSWORD
ENTER
Setup
When “INPUT PASSWORD” appears on the
screen, input the password.
SETUP
1 KIDS
2G
3 PG
4 PG-13
5 PG-R
6R
7 NC-17
8 ADULT
✓
SETUP
53
Others Setup
About DVD
Playable Disc
6
Changing a password.
To change your password, move the cursor
to “ CHANGE PASSWORD” and press [√].
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
CHANGE PASSWORD
ON
ON
RESET
8 ADULT
ENTER
Then enter a new password and press
[ENTER].
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
CHANGE PASSWORD
SETUP
ON
ON
RESET
8 ADULT
XXX*
ENTER
SETUP
Confirm a new password.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
CONFIRM PASSWORD
ENTER
ON
ON
RESET
8 ADULT
****
SETUP
• DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD
Disc type
DVD
Playable
Possible
Restriction
Region number 2 or Region number All
Video CD
CD
CD-ROM
Possible
Possible
Possible
Version 1.0/1.1/2.0, SVCD
PCM or dts
MP3 File
CD-R
CD-RW
Possible
Possible
Video-CD/CD/MP3/DivX® Video/JPG
Video-CD/CD/MP3/DivX® Video/JPG
DVD±R
DVD±RW
Possible
Possible
DVD Video/MP3/DivX® Video/JPG
DVD Video/MP3/DivX® Video/JPG
DivX® Video
DVD-ROM
Possible
Impossible
DVD-RAM
Photo CD
Impossible
Possible
.avi/ .DivX/ .mpeg/ .mpg File
except KODAC CD
• You should record the file with standard format.
• Playback of some discs such as CD-R, CD-RW, DVD-R, DVD-RW, or DVD+RW may be impossible according
to its record status.
Now your password is changed.
REGION MANAGEMENT INFORMATION
This unit is designed and manufactured to respond to the Region Management information that is
recorded on a DVD disc. The region number of this player is “2”. If the region number described on the
DVD discs does not correspond to the Region number of this player, the player will not play this disc.
This player will play DVD discs made for “ALL” regions. Therefore, this player will play DVD discs
marked with labels containing the region number “2” or “ALL”.
The initial password is 3308. In case you forget newly-input password, you can use 3308 as a
password.
“Parental Lock” activates only if you set a password and the unit goes into Lock status. When the
disc has no parental function even if the disc for adult only, Parental Lock doesn’t activate.
2
ALL
(Region 2)
(Region ALL)
The others
54
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
55
About DVD
About DVD
Terms related with DVD
DVD
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video
information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By
using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-defined screen
and quality sound like a movie theater.
Handling Disc
CDDA
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3
Audio compression format that enables audio files to be stored and transferred on a computer with a
relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)
• To keep a disc clean condition, please do not touch a side containing play
information.
• Do not attach a bit of paper or sticky tape on it.
• Do not expose a disc to a direct sunlight or electric heating systems.
• After using it, please keep a disc in a case.
PBC
This is recorded on a Video CD 2.0, Video CD 3.0 and SVCD. The scenes or information to be viewed (or
listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV
monitor. It stands for PlayBack Control.
Cleaning Disc
CHAPTER
It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of
which a track is called as a chapter. A certain scene of a screen can be quickly searched with the
chapter number.
• Before using it, please rub it from center toward outside with clean clothes.
• Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning
goods or antistatic sprays.
TITLE
It means the information recorded in a DVD. A DVD can be divided into may titles.
TRACK
It means the information recorded in a video CD and audio CD. A disc consists of many a track,
for which a user can search a certain position.
dts
Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie
theatres around the world. It enables the bit rate to be increased to provide good sound quality.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a number of
different angles.
PCM
Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a
DVD is recorded in 48KHz/16bit up to 96KHz/24bit.
Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps
to 640 kbps, thus offering flexibility and economical performance as well as uncompromised
sound quality.
Digital audio data that is decoded into an analog signal for subsequent output to speakers.
Lt/Rt
It indicates L/R of Dolby Digital 2CH Downmix output.
Downmix
DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from
the output audio channel configuration. For example, with just one stereo speaker system you can
hear full 5.1 channel audio.
RGB
This stands for red, green and blue. It means the video signal separated into its three primary
colour components ready to drive the picture tube almost directly. Two signalling connections are
needed to make the television accept the synchronisation and RGB signals. All this is in the
SCART connector. Not all televisions have RGB inputs.
SCART
An acronym (Syndicat des Constructeurs d'Appareils Radiorécepteurs et Téléviseurs) for a
connector used with many kinds of audio-visual equipment. It is also called Peritel and Euroconnector.
56
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
The others
Bitstream
57
Basic information about VCR and Videotape
Before doubting about troubles (VCR)
Terms related with VCR
Symptom
AFT
Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition.
CABLE
Cable television.
Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you
locate a particular segment of the tape quickly and easily.
Checks
•
“Power On” does not work.
➤
Please check whether a power plug is inserted in an electric outlet.
•
It does not work even in “Power On”.
➤
➤
Please check whether a videotape is inserted in.
Try to insert a plug again.
•
A videotape is not inputted in.
➤
➤
➤
Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is in.
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
When a videotape forces to be ejected, the tape may not be inputted. In
the case, please pull out an outlet, and then push the tape smoothly.
Long Play, an intermediate tape recording speed that combines most of the picture/audio quality
obtainable at the standard recording speed with some of the tape economy of Extended Play (EP).
OSD
On-screen display of information pertinent to the features of the VCR.
➤
OTR
One-touch recording, a feature that allows you to record the program you’re watching by
pressing the REC key. Each press of the key increases the recording time by 30 minutes, up to 10
hours.
➤
•
Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video
component) by an antenna or cable system.
On inputting a videotape, the tape is
re-ejected.
➤
RF
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
•
A videotape is not ejected.
➤
Safety tab
The plastic tab at the back of a video tape cassette which, when removed, prevents accidental
erasure of a recording.
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull out
a power plug for about 10mins and then press “EJECT” button.
•
SP
Standard play, the recording speed to use when the best picture quality is of prime importance
(and when total recording time is not).
A channel on video and a play screen
does not appear.
➤
➤
➤
➤
Please check your antenna’s connection.
TV channel should be fixed on video channel.
Please check your antenna’s signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
Press “TV/VCR” and then let “VCR” is displayed on the display panel.
•
Noise (screen noise) appears on
screen.
➤
➤
➤
While in no use of VCR, was it turned on?
While in recording a program, do you watch another channel?
Select TV by pressing [TV/VCR] button on remote control.
•
Noise appears on screen after
recording.
➤
While in playing a videotape, there may happen some noise or blot
in the part of the beginning of a videotape or resuming “PAUSE”,
which are not breakdown.
•
While in playing, noise appears.
➤
Please press “TRACKING” for better screen. Videotape may be
poor. Try to change it to another one.
•
•
Sound and screen are irregular.
Sound comes out but screen does not
appear.
Screen is irregular and stripes appears.
"Screen Error" message is displayed
in a screen.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
•
While recording and playing, the top
of screen extremely waves.
➤
Since VCR Play signals are not stable like a TV signals, screen may
be unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
•
A screen is not clear.
➤
➤
➤
In case videotape is the one recorded by other products or old one,
stripe may appear on the screen.
Try to adjust the screen by [TRACKING+/-] button
Try to use a head-cleaner.
➤
➤
Try to use a head-cleaner.
Try to adjust the screen by [TRACKING+/-] button.
What is dew condensation symptom?
• If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from airconditioner...and others, temperature varies sharply, which makes dew on head drums of VCR.
If dew condensation occurs,
1
First, turn it on for one or two hours before using it.
2
Do not use it because it may develop troubles of a VCR or videotape.
How to use a head cleaner
• In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads.
Please remove contaminants using a head-cleaner like below order.
1 Insert a head-cleaner into VCR
2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.
PLAY (5secs)
3
FF (10secs)
Eject a head-cleaner from VCR
• If the screen is not clean yet, please repeat the above 2 or 3 times more.
• A head-cleaner is not for sale. Please ask it for the nearest agent.
• In case a user ask the removal of contaminants of us, the user should pay extra charges.
58
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
•
•
•
A screen at pause is trembling or
slow screen is not clear.
The others
LP
59
Before doubting about troubles (VCR)
Symptom
•
Recording a TV program is
impossible.
➤
➤
➤
➤
➤
➤
➤
Once pressing “REC”, a videotape is
ejected automatically.
Symptom
Checks
➤
➤
➤
➤
•
Before doubting about troubles (DVD)
➤
➤
➤
➤
For recording, you should use videotape with a tab.
Please check whether a channel is fixed on video. If not, you have to
turn it into “TV” by pressing “INPUT” button.
Please check whether the timer recording info is right.
Are RF cables inputted antenna connection terminal correctly?
Does a CH number selected in display section appear?
Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
Check whether a tape attached with a recording tap is inserted.
Check whether the screen is displayed in VCR Only Channel. Press
[INPUT] button in this remote controller to adjust in "General
Broadcast" condition.
Is the rounded line (RF cable) connected in "ANT.IN" terminal?
Is the selected channel number shown in Display?
Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
Please check whether the clock is right.
Does the display on your video show “ ” (Ready to timer
recording)? Please make it out.
Please check whether the timer recording info is right.
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
•
The recorder does not play.
Checks
➤
➤
➤
•
No sound comes through.
➤
If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 2 or All.
Please check whether a DVD is inserted in a right direction.
If it is a CD-ROM for PC or DVD-ROM, it does not work.
➤
➤
➤
Play mode may be “SLOW” or “PAUSE”(In abnormal speed play,
no sound comes through)
Did you connect the parts in right way?
Please check the operative condition of TV or amplifier.
From SETUP, please check “AUDIO” items.
•
A disc is playing but screen does not
appear or poor screen appears.
➤
➤
➤
➤
➤
Did you turn on your TV sets?
Did you connect the parts in right way?
The play may be in “PAUSE”.
A disc may have some contaminants or be damaged.
A disc may be bad one.
•
Sound is irregular
➤
➤
➤
Please check the connection with Dolby Digital amplifier.
Please check the plugs are connected with one another tightly.
Some contaminants may be remained in connection terminal.
•
REMOTE does not work.
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Battery may be weak or exhausted.
When you operate DVD, use it by pressing [DVD] button.
•
Dolby Digital sound does not work
➤
➤
➤
Dolby Digital sound can be worked in the Dolby Digital amplifier only.
Please check “Dolby Digital ” mark on your DVD.
In case of playing it through digital output, while pressing “STOP”,
please check whether “Digital Output” is “Bitstream” by pressing
“SETUP”.
Please check the connection is correct.
•
“AUDIO” or “SUBTITLE” button
does not work.
➤
If a DVD does not include language information, it does not support
the function.
•
Timer recording of Cable TV does
not work.
➤
➤
➤
➤
Was a cable data output code connected correctly?
Were a converter manufacturer setup and output channel right?
Did you enter a password? (Please cancel it.)
Did you turn off your player? (Please turn it on.)
•
In spite of pressing “CHANNEL”, a
channel can not be set.
➤
➤
You may not memorize channels.
Please check your channel setting or press a number button.
•
While duplicating, screen is not
clean and distorted.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
•
“ANGLE” button does not work
while a DVD is playing.
➤
“ANGLE” is supported only in a DVD contains multi angle scenes. Also
a user can confirm the support with the “ANGLE” mark on screen.
•
remote control does not work.
➤
➤
Battery may be weak or exhausted.
A receiver of remote control may be different with a sender.
•
“MENU” does not appear while a
DVD is playing.
•
Buttons on remote control do not
work.
➤
In case a videotape is positioned in the beginning, “VISS REW” and
“REW” do not work.
In case a videotape is positioned in the end, “FF”, “VISS FF”, “PLAY”
and “REC” do not work.
Please check whether another button is pressed.
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Please check a battery in remote control whether it is exhausted or not.
A DVD may not contain menu information.
• The file name of MP3 (CD-R) appears
with strange letters.
➤
The file name of MP3 recognize only the Alphabet (A~Z, a~z),
numbers (0~9) and a special symbol on keyboard (~, !, @, #, $ ....)
and 10 letters can be displayed in maximum.
The letters except above case will be displayed like “----”.
➤
➤
•
VISS index search does not work.
➤
➤
Cable broadcasting can not be
selected.
➤
➤
•
Any MP3 (CD-R) file isn’t displayed.
➤
If the surface of disc is injured, the file display and playback can be
impossible.
Please select “CABLE” not “NETWORK” from the “CHANNEL
SETTING”.
60
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
The others
•
Are you playing a tape that is not recorded in this recorder? (Try to
record it with the recorder.)
You may start recording it in “REC-PAUSE”. Please start recording it
from stop condition.
➤
61
Specifications
Power
200-240V~, 50/60Hz
Consumed electricity
22W
Weight
4.6kg
Dimension (W x H x D)
435mmx93mmx255mm (without foot), 435mmx98mmx255mm (with foot)
Operative temperature
+5°C~40°C
Installation condition
Horizontal / Relative humidity under 80%
Laser output
5mW (continuous wave max.)
Wave length
635nm (DVD), 730nm (CD)
Signal type
PAL COLOR
Antenna Input/output
U/V-mixed: 75Ω unbalanced
VIDEO input
1.0Vp-p (unbalanced, RCA JACK)
AUDIO input
-8.8dBm, RCA JACK
VIDEO output (common use of DVD and VCR)
VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK, SCART JACK
VIDEO output (DVD only)
RGB output (75Ω In load R: 0.7Vp-p, G:0.7Vp-p, B:0.7Vp-p)
AUDIO output (common use of DVD and VCR)
Audio output terminal (2 kinds): -5.8dBm(VCR), 2Vrms(DVD), RCA JACK
AUDIO output (DVD only)
Analogue AUDIO output : 2.0Vrms
Playable tape
Very high dense tapes with VHS marks
Digital audio output (OPTICAL, COAXIAL)
Playable disc
DVD, VIDEO-CD, CD (12cm), CD (8cm), MP3, CD-R, CD-RW
Tape speed
SP: 23.39mm/s, LP: 11.70mm/s
Playtime
SP: 3hrs, LP: 6hrs (use of E180tape)
Clock display
24 hrs
Time Recording
8 programs a month
Persistence in power failure
1min
VIDEO S/N (VCR)
Over 43dB(Standard recording)
Resolution
VCR
DVD
Over 240 lines (Standard recording)
Over 400 lines (Playback DVD)
AUDIO (VCR)
Over 65dB
AUDIO (DVD)
90dB
AUDIO dynamic range
90dB
DVD Audio output standards
Output
Analogue Audio output
Digital Audio output
Optical digital audio output
DVD
48/96KHz sampling
48KHz sampling
48KHz sampling
Disc type
VIDEO-CD
44.1KHz sampling
44.1KHz sampling
44.1KHz sampling
CD
44.1KHz sampling
44.1KHz sampling
44.1KHz sampling
62
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
QUICK START GUIDE FOR SORTING CHANNELS ON THE DVD COMBO
Once the ‘Auto Set’ function has been completed the On Screen Display will show a list of the
channels which it has found, displayed in the order it found them.
It is unlikely, that they will be in the correct oder ie. ARD as PR01, ZDF as PR02, P-03 as PR03, p-04
as PR04 and MTV as PR05.
Therefore, it will be necessary to Sort the channels displayed, into the correct order.
Please follow the following procedure.
1 Press the [VCR] button to select the VCR mode.
STOP
SP
PR01 P-01
2 Press the [SETUP] button.
SETUP
3 Select the ‘PR PRESET’ using [ …/††] buttons and press the [OK/ENTER]
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
button.
4 Select the ‘PR ALIGN’ using [ …/††] buttons and press the [OK/ENTER]
PR+/-:SELECT
OK:CONFIRM
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
button.
5 Select the channel that needs to be moved and press the [OK/ENTER]
button.
PR+/-:SELECT
OK:CONFIRM
6 Press the [OK/ENTER] button in order to select the ‘PR’ number which
PR01
PR02
PR03
PR04
PR05
PR06
PR07
† ] buttons.
you want to place the current selected channel using [ …/†
ie. PR01 ARD. And press the [OK/ENTER] button to confirm.
SETUP:END
SETUP:END
PR ALIGN
P-01
ZDF
P-03
P-04
MTV
ARD
P-07
PR08
PR09
PR10
PR11
PR12
PR13
PR14
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
P-08
P-09
P-10
P-11
----------
➝
SETUP:END
PR ALIGN
Repeat above 5-6 steps to align the other channels.
PR01 ARD
PR02 P-01
PR03 ZDF
PR04 P-03
PR05 P-04
PR06 MTV
PR07 P-07
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
➝
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
SETUP:END
Download PDF