START-UP & COMMISSIONING SERVICE PEAK PERFORMANCE FROM THE START

START-UP & COMMISSIONING SERVICE PEAK PERFORMANCE FROM THE START
START-UP & COMMISSIONING SERVICE
Get optimal reliability and integrity from the very start
PEAK PERFORMANCE
FROM THE START
Use Emerson’s Start-Up
& Commissioning Service
to validate installation
and ensure proper
configuration and
commissioning.
Entrust the work to
Emerson service engineers
who are factory trained and
certified on Rosemount
products. We can also train
your staff and extend your
warranties to keep your
products operating at peak
performance for years.
Run right. On time, every time.
Getting a facility, or a process, up and running under a tight timeline has never been
easy. And, as you integrate complex technologies the task becomes even more
demanding. Your staff may not have the specialized skillsets—much less the time—to
meet all the requirements and stay on schedule.
Check off one challenge. The support you need to properly start-up and commission
Rosemount® products is readily available from Emerson’s Lifecycle Services for
Rosemount products. Local Emerson™ service engineers will complete the work on
time, every time. Globally, all service engineers follow documented standard operating
procedure protocols to ensure consistent service outcomes: accurate and reliable process
measurement products in any application, in any process, in any plant—every time.
START-UP & COMMISSIONING SERVICE
Maximize and protect your
Rosemount products
Lifecycle Services offer the Start-up & Commissioning Service tailored to specific
Rosemount products. Standardized procedures ensure you always receive support in the
same manner, using the same methods. You will have Emerson’s best practices working
on your behalf to give you the best possible performance starting on day one, to provide
lasting process integrity.
+ Ensure the highest quality
– Validate proper mechanical and electrical installation of Rosemount products
– Configure products to operating parameters
+ STRAIGHT FROM
THE CUSTOMER
“When weighted against what was
gained from this project, the total
project cost, including installation
services and customized user interface
software, seemed quite reasonable
given the project’s payback.”
– Michael Fischback,
Facilities Engineer, PHP
– Commission measurement products and verify performance under process conditions
– All Emerson service engineers are factory trained and certified on Rosemount products
+ Start-up on schedule
– Schedule onsite work during the business week, or over the weekend, to fit your
tight project timeframes
+ Improve staff skill set
– Emerson service engineers will provide an onsite overview of essential installation,
operation, and troubleshooting best practices to help diagnose and resolve
common product and network issues
+ Get a three-year warranty*
– Increase one-year factory warranties to three full years with the purchase of
Emerson’s Start-up & Commissioning Service for Rosemount Products*
+ Receive a one-year follow-up
– A local Emerson Service Center representative will contact you to assess product
and network performance
+ LEARN MORE
Learn more about
Emerson’s Lifecycle Services
for Rosemount products at
www.rosemount.com/
lifecycleservices
Middle East and Africa Regional Office
Emerson Process Management
Emerson FZE
P.O. Box 17033, Jebel Ali Free Zone - South 2
Dubai, United Arab Emirates
+971 4 8118100
+971 4 8865465
[email protected]
Contact Emerson today to learn how we can optimize your Rosemount products to
unleash their full potential for your processes.
* If the device was purchased with an extended warranty, and you purchase a start-up service, then whichever
warranty is longer will be in effect.
+ EMERSON CERTIFIED. TRUST THE INDUSTRY LEADER.
When you invest in Rosemount products, you expect a higher level of performance. You can count on
factory-trained and certified experts for all diagnostics, field service and repair on Rosemount and other
manufacturers’ process measurement products. With an expanding network of service capabilities
across the world, rest assured we are where you need us—when you need us.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
All other marks are the property of their respective owners. © 2015 Rosemount Inc. All rights reserved.
00807-0400-6189 Rev AA 04/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement