A 1.103.200

A 1.103.200
Data sheet
Drive inserts for El-O-Matic actuators
Sheet No.: A1.103.200 Rev. C
Date: August 2011
Standard available
insert shapes
Insert mounting
acc. ISO 5211
sq Max.
Description
Most of the El-O-Matic actuators are fitted with drive inserts. This enables actuators to be
directly mounted onto suitable valves and eliminates the need for a bracket and coupling type
mounting kit. The use of direct mounts significantly cuts the cost of the valve/actuator assembly.
Ø P2
Ø P1
Standard actuators are fitted with square drive inserts in accordance with ISO 5211 (or DIN
3337), but a wide variety of other inserts are also available. Special inserts may have oversize or
undersize squares, double-D and shaft key way forms.
Optional available
insert shapes
Drive inserts can be supplied on factory built actuators or as loose items and are easily
replaceable at distributor or end user level.
D Max.
M1 M2
Where direct mounts are not possible, for instance on valves with exposed grand packing, the
use of inserts often simplifies the design of the mounting kit.
Material :
Finish :
M1
M2
P1
P2
Sq max.
D max.
Standard inserts with inner-square-dimensions per actuator type
E40 / E65 E100
E150
E200
E350
E600
E950
0.551
0.748
0.748
0.866
1.063
1.063
1.417
0.354
0.394
0.394
0.472
1.36
0.71
0.630
0.827
1.36
0.71
0.630
0.827
Optional insert dimensions
0.551
0.551
0.551
0.630
0.630
0.630
0.669
0.669
0.669
0.866
0.748
0.748
0.945
0.945
0.866
1.063
1.063
0.945
Maximum insert dimensions
1.36
1.97
1.97
1.97
1.06
1.46
1.46
1.46
0.91
1.26
1.26
1.26
0.99
1.43
1.43
1.43
0.748
1.063
1.063
1.063
0.929
1.323
1.323
1.323
0.472
0.551
0.63
Aluminum alloy
Anodized
The following actuator types do not have inserts.
- E12,
- P2500 and P4000
- 180° actuators
D Max.
E25
0.433
E
0.551
0.630
0.669
0.748
0.866
0.945
0.866
2.05
1.44
1.063
1.323
2.52
1.91
1.417
1.772
E1600
1.811
These actuators have inner square directly in the bottom of the pinion. See the following data
sheets for more information :
E12
ISO5211
P2500/P4000 ISO 5211
180°
ISO 5211
A1.103.102
A1.103.106
A1.203.011
3.23
2.38
1.811
2.362
www.El-O-matic.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement