AS20003 - 110 150 Gallon ATV Sprayer Operators Manual

AS20003 - 110 150 Gallon ATV Sprayer Operators Manual
04-25-00
AS20003, Rev. 2
Dethmers Manufacturing Company
DOING OUR BEST TO PROVIDE YOU THE BEST
ATV SPRAYER
110 AND 150 GALLON
OPERATORS MANUAL
READ complete manual CAREFULLY
BEFORE attempting operation.
ASSEMBLY
CALIBRATION
OPERATION
REPLACEMENT PARTS
DEMCO • Dethmers Mfg. Co. • 4010 320th St. • P.O. Box 189 • Boyden, IA 51234
PH: (712) 725-2311 or (712) 725-2302 • Toll Free: 1-800-543-3626 • FAX: 1-800-845-6420
www.demco-products.com
Page 1
Thank you for purchasing a Demco sprayer. We feel you have made a wise choice and hope you are
completely satisfied with your new sprayer. If you have any questions regarding the applications of
certain solutions or chemicals, contact your chemical supplier and follow chemical manufacturer
recommendations as well as all licensing and use restrictions or regulations.
WARNING:
TO AVOID PERSONAL INJURY OR PROPERTY DAMAGE, OBSERVE
FOLLOWING INSTRUCTIONS:
Chemicals are dangerous. Know exactly what you're going to do and what is
going to happen before attempting to work with these products. Improper
selection or use can injure people, animals, plants and soil.
Always wear protective clothing such as coveralls, goggles and gloves when
working with chemicals or sprayer.
Be sure to dispose of all unused chemicals or solutions in a proper and
ecologically sound manner.
GENERAL INFORMATION
1. Unless otherwise specified, high-strength (grade5)
(3 radial-line head markings) hex head bolts are
used throughout assembly of this sprayer.
3. When placing a parts order, refer to this manual for
proper part numbers and place order by PART NO.,
DESCRIPTION, and COLOR.
2. Whenever terms "LEFT" and "RIGHT" are used in
this manual it means from a position behind sprayer
and facing forward.
Page 2
Table of Contents
General information ..................................................................................... 2
Safety , Signal Words .................................................................................. 4
Equipment Safety Guidelines ...................................................................... 5
Lighting and Marking ................................................................................... 5
Safety Sign Locations .................................................................................. 6
Safety Sign Care ......................................................................................... 7
Tire Safety ................................................................................................... 7
Remember ................................................................................................... 7
Before Operation ........................................................................................ 7-8
During Operation ........................................................................................ 8-9
Following Operation ..................................................................................... 9
Highway and Transport Operations .......................................................... 10-11
Performing Maintenance ............................................................................. 11
Bolt Torque.................................................................................................. 12
Frame Assembly ......................................................................................... 13
Axle Assembly ............................................................................................ 14
Axle Insert Installation ................................................................................ 14
Saddle Assembly and Tank Installation ...................................................... 15
Panel Mount Assembly and Parts List........................................................ 16
Wash Tank Assembly .................................................................................. 17
21’ & 28’ Truss-T Boom Installation ........................................................... 18
Hose Reel Installation and Parts List ......................................................... 19
Sprayer Parts Breakdown and Parts List ................................................. 20-21
Roller Pump Plumbing Breakdown ........................................................... 22-23
Centrifugal Pump Plumbing Breakdown ................................................... 24-25
Diaphragm Pump Plumbing Breakdown ................................................... 26-27
Diaphragm Pump Parts Breakdown ........................................................... 28
Roller Pumps Parts Breakdown................................................................ 29-30
Centrifugal Pump Parts Breakdown ........................................................... 30
Hand Gun Parts Breakdown ....................................................................... 31
Tee Valve Parts Breakdown ........................................................................ 31
Pressure Relief Valve Breakdown .............................................................. 31
Sprayer Checklist ........................................................................................ 32
Page 3
SAFETY
TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS
MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING
YOUR PERSONAL SAFETY AND SAFETY OF OTHERS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
THIS SYMBOL MEANS
ATTENTION
BECOME ALERT
YOUR SAFETY IS INVOLVED!
SIGNAL WORDS
Note: use of the following signal words DANGER,
WARNING, and CAUTION with safety messages.
Appropriate signal word for each has been selected
using following guidelines:
DANGER:
Indicates an imminently hazardous situation that,
if not avoided, will result in death or serious injury.
This signal word is to be limited to most extreme
situations typically for machine components which,
for functional purposes, cannot be guarded.
WARNING:
Indicates a potentially hazardous situation that, if
not avoided, could result in death or serious injury,
and includes hazards that are exposed when
guards are removed. It may also be used to alert
against unsafe practices.
CAUTION:
Indicates a potentially hazardous situation that, if
not avoided, may result in minor or moderate injury.
It may also be used to alert against unsafe
practices.
If you have questions not answered in this manual , require additional copies, or if your manual is damaged,
please contact your dealer or Dethmers Mfg. Co., P.O. Box 189, 4010 320th Street, Boyden, IA 51234
ph: (712) 725-2311 or (712) 725-2302 Toll Free: 1-800-543-3626 Fax: (712) 725-2380
http://www.demco-products.com
Page 4
SAFETY...YOU CAN LIVE WITH IT
EQUIPMENT SAFETY GUIDELINES
Every year many accidents occur which could be avoided by a few seconds of thought and
more careful approach to handling equipment. You, the operator, can avoid accidents by
observing precautions in this section. To avoid personal injury, study precautions and insist
those working with you, or you yourself, follow them.
In order to provide a better view, certain illustrations in this manual may show an assembly
with a safety shield removed. However, sprayer should never be operated in this condition.
Keep all shields in place. If shield removal becomes necessary for repairs, replace shield
prior to use.
Replace any caution, warning, danger or instruction safety decal that is not readable or is
missing. Location of such decals is indicated in this booklet.
Do not attempt to operate this sprayer under the influence of alcohol or drugs.
Review safety instructions with all users.
Operator should be a responsible adult. DO NOT ALLOW PERSONS TO OPERATE OR
ASSEMBLE THIS SPRAYER UNTIL THEY HAVE DEVELOPED A THOROUGH UNDERSTANDING
OF SAFETY PRECAUTIONS AND HOW IT WORKS.
To prevent injury or death, use a tractor equipped with a roll over protective system (ROPS).
Do not paint over, remove, or deface any safety signs or warning decals on your sprayer.
Observe all safety signs and practice instructions on them.
Never exceed limits of sprayer. If its ability to do a job, or to do so safely is in question
DON'T TRY IT.
LIGHTING AND MARKING
It is the responsibility of operator to know lighting and marking requirements of local highway
authorities and to install and maintain equipment to provide compliance with regulations.
Add extra lights when transporting at night or during periods of limited visibility.
Lighting kits are available from your dealer or manufacturer.
Page 5
SAFETY SIGN LOCATIONS
Types of safety sign and locations on equipment are shown in illustration below. Good safety
requires that you familiarize yourself with various safety signs, type of warning, and area or
particular function related to that area, that requires your SAFETY AWARENESS.
B
C
A
B. AB21014
A. AA21012 Qty.2-Both sides of tank
C. AA21002 black
Qty.2-Both
sides of tank
and red on clear
02/99
AA21002
Page 6
SAFETY SIGN CARE
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible.
• Replacement parts that displayed a safety sign should also display current sign.
• Safety signs are available from your distributor, dealer parts department, or manufacturer.
How to install safety signs:
• Be sure installation area is clean and dry.
• Decide on exact position before you remove backing paper.
• Remove smallest portion of split backing paper.
• Align decal over specified area and carefully press small portion with
exposed sticky backing in place.
• Slowly peel back remaining paper and carefully smooth remaining portion of
decal into place.
• Small air pockets can be pierced with a pin and smoothed out using piece of decal
backing paper.
TIRE SAFETY
• Failure to follow proper procedures when mounting tire on rim can produce an
explosion resulting in serious injury or death.
• Do not attempt to mount tire unless you have proper equipment and experience.
• Inflating or servicing tires can be dangerous. Whenever possible, trained personnel
should be called to service or mount tires.
• Always order and install tires and wheels with appropriate type and load capacity to
meet or exceed anticipated weight to be placed on sprayer.
REMEMBER
Your best assurance against accidents is a careful and responsible operator. If there is any
portion of this manual or function you do not understand, contact your local authorized dealer
or manufacturer.
BEFORE OPERATION:
• Carefully study and understand this manual.
• Do not wear loose-fitting clothing which may catch in moving parts.
• Always wear protective clothing and substantial shoes.
• It is recommended that suitable hearing and eye protection be worn.
• Operator may come in contact with certain materials which may require specific safety
equipment relative to handling of such materials. (Ex
amples: extremely dusty, molds,
fungus, bulk fertilizers, etc.)
Page 7
• Keep wheel and lug nuts tightened to specified torque.
• Assure that agricultural implement tires are inflated evenly.
• Give sprayer a visual inspection for any loose bolts, worn parts, or cracked welds, and make
necessary repairs. Follow maintenance safety instructions included in this manual.
• Be sure there are no tools lying on or in equipment
• Do not use the sprayer until you are sure that area is clear, especially around children and
animals.
• Don't hurry learning process or take sprayer for granted. Ease into it and become familiar
with your new equipment.
• Practice operation of your sprayer and its attachments. Completely familiarize yourself
and other operators with its operation before using.
• Use a tractor equipped with Roll Over Protection System (ROPS) and fasten your seat belt
prior to starting engine.
• Manufacturer does not recommend usage of tractor with ROPS removed.
• Move tractor wheels to widest recommended settings to increase stability.
• Do not allow anyone to stand between tongue or hitch and towing unit when backing
up to equipment.
DURING OPERATION
• Beware of bystanders, PARTICULARLY CHILDREN! Always look around to make sure it is
safe to start engine of towing unit or move sprayer. This is particularly important with higher noise
levels and quiet cabs, as you may not hear people shouting.
• NO PASSENGERS ALLOWED- Do not carry passengers anywhere on or in the tractor or
sprayer.
• Beware of bystanders, PARTICULARLY CHILDREN! Always look around to make sure it is
safe to start engine of towing unit or move sprayer. This is particularly important with higher noise
levels and quiet cabs, as you may not hear people shouting.
• NO PASSENGERS ALLOWED- Do not carry passengers anywhere on or in the tractor or
sprayer.
• Keep hands and clothing clear of moving parts.
• Do not clean, lubricate, or adjust your sprayer while it is moving.
• When halting operation, even periodically, set tractor or towing unit brakes, disengage
PTO, shut off engine, and remove ignition key.
Page 8
• Be especially observant of operating area and terrain- watch for holes, rocks, or other hidden
hazards. Always inspect area prior to operation.
-
DO NOT operate near edge of drop-offs or banks.
-
DO NOT operate on steep slopes as overturn may result.
-
Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops.
• Pick the most level possible route when transporting across fields. Avoid edges of ditches,
gullies, and steep hillsides.
• Be extra careful when working on inclines.
• Periodically clear equipment of brush, twigs, or other materials to prevent buildup of dry
combustible materials.
• Maneuver tractor or towing unit at safe speeds.
• Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury
or death.
• Avoid loose gravel, rocks, and holes; they can be dangerous for equipment operation or movement.
• Allow for sprayer length when making turns.
• Do not walk or work under raised components or attachments unless securely positioned and
blocked.
• Keep all bystanders, pets, and livestock clear of work area.
• Operate towing unit from operators seat only.
• Never stand alongside of unit with engine running or attempt to start engine and/or operate machine
while standing alongside of unit.
• Never leave running equipment attachments unattended.
• As a precaution, always recheck hardware on equipment following every 100 hours of operation.
Correct all problems. Follow maintenance safety procedures.
FOLLOWING OPERATION
• Following operation, or when unhitching, stop tractor or towing unit, set brakes, disengage
PTO and all power drives, shut off engine and remove ignition key.
• Store sprayer in an area away from human activity.
• Do not park sprayer where it will be exposed to livestock for long periods of time. Damage and
livestock injury could result.
• Do not permit children to play on or around the stored sprayer.
• Make sure all parked machines are on a hard, level surface and engage all safety devices.
• Wheel chocks may be needed to prevent unit from rolling.
Page 9
HIGHWAY AND TRANSPORT OPERATIONS
• SAFETY CHAINS: If equipment is going to be transported on a public highway, Always
follow state and local regulations regarding safety chains and auxiliary lighting. Be sure to
check with local law enforcement agencies for your own particular regulations. If required
safety chains should be obtained and installed. Only safety chains (not elastic or nylon/plastic
tow straps) should be used to retain connection between towing and towed machines in event
of separation of primary attaching system. Use a high strength, appropriately sized hitch pin
with a mechanical retainer and attach safety chains. Criss cross chains under tongue and
secure to draw bar cage, mounting loops, or bumper frame.
• Adopt safe driving practices:
-
Keep brake pedals latched together at all times. NEVER USE INDEPENDENT BRAKING
WITH SPRAYER IN TOW. LOSS OF CONTROL OR UPSET MAY RESULT.
- Always drive at a safe speed relative to local conditions and ensure that your speed is low
enough for an emergency stop. Keep speed to a minimum.
- Reduce speed prior to turns to avoid risk of overturning.
- Always keep tractor or towing unit in gear to provide engine braking when going
downhill. Do not coast.
- Do not drink and drive!
• Comply with state and local laws governing highway safety and movement of farm machinery on
public roads.
• Use approved accessory lighting flags and necessary warning devices to protect operators of
other vehicles on highway during transport. Various safety lights and devices are available
from your dealer.
• Use of flashing amber lights is acceptable in most localities. However, some localities prohibit
their use. Local laws should be checked for all highway lighting and marking requirements.
• When driving tractor and sprayer under 20 mph (40 kph) day or night, use flashing amber warning
lights and a slow moving vehicle (SMV) identification emblem.
• Plan your route to avoid heavy traffic.
• Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow
bridges, intersections, etc.
• Be observant of bridge load ratings. Do not cross bridges rated lower than gross weight of unit
you are operating.
Page 10
• Watch for obstructions overhead and side to side while transporting.
• Always operate equipment in a position to provide maximum visibility at all times. Make
allowances for increased length and weight of sprayer when making turns, or stopping.
PERFORMING MAINTENANCE
•
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
•
Make sure there is plenty of ventilation. Never operate engine of towing vehicle in
a closed building. Exhaust fumes may cause asphyxiation.
•
Before working on this machine, stop towing vehicle, set brakes, disengage PTO
and all power drives, shut off engine and remove ignition key.
•
Be certain all moving parts and attachments have come to a complete stop before
attempting to perform maintenance.
•
Always use a safety support and block wheels. Never use a jack to support machine.
•
Always use proper tools or equipment for job at hand.
•
Use extreme caution when making adjustments.
•
Follow torque chart in this manual when tightening bolts and nuts.
•
Never use your hands to locate a hydraulic leak on attachments. Use a small piece of
cardboard or wood. Hydraulic fluid escaping under pressure can penetrate skin.
•
Openings in skin and minor cuts are susceptible to infection from hydraulic fluid.
Without immediate medical treatment, serious infection and reactions can occur.
•
When disconnecting hydraulic lines, shut off hydraulic supply and relieve all hydraulic
pressure.
•
Replace all shields and guards after servicing and before moving.
•
After servicing, be sure all tools, parts and service equipment are removed.
•
Do not allow grease or oil to build up on any steps or platform.
•
When replacing bolts refer to owners manual.
•
Refer to bolt torque chart for head identification marking.
•
Where replacement parts are necessary for periodic maintenance and servicing,
genuine factory replacement parts must be used to restore your equipment to original
specifications. Manufacturer will not claim responsibility for use of unapproved parts or
accessories and other damages as a result of their use.
•
If equipment has been altered in any way from original design, manufacturer does
not accept any liability for injury or warranty.
•
A fire extinguisher and first aid kit should be kept readily accessible while performing
maintenance on this equipment
Page 11
BOLT TORQUE
TORQUE DATA FOR STANDARD NUTS, BOLTS, AND CAPSCREWS.
Tighten all bolts to torques specified in chart unless otherwise noted. Check tightness of
bolts periodically, using bolt chart as guide. Replace hardware with same grade bolt.
NOTE: Unless otherwise specified, high-strength Grade 5 hex bolts are used throughout
assembly of equipment.
Bolt Torque for Standard bolts *
Torque Specifications
“A”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
3/4”
7/8”
1”
GRADE 2
lb-ft (N.m)
GRADE 5
lb-ft (N.m)
GRADE 8
lb-ft (N.m)
6
10
20
30
45
70
95
165
170
225
9
18
30
50
75
115
150
290
420
630
12
25
45
80
115
165
225
400
650
970
(8)
(13)
(27)
(40)
(60)
(95)
(130)
(225)
(230)
(300)
(12)
(25)
(40)
(70)
(100)
(155)
(200)
(390)
(570)
(850)
(16)
(35)
(60)
(110)
(155)
(220)
(300)
(540)
(880)
(1310)
Bolt Torque for Metric bolts *
“A”
Torque figures indicated are valid for
non-greased or non-oiled threads and
heads unless otherwise specified.
Therefore, do not grease or oil bolts or
capscrews unless otherwise specified
in this manual. When using locking
elements, increase torque values
by 5%.
* GRADE or CLASS value for bolts
and capscrews are identified by their
head markings.
6
7
8
10
12
14
16
18
20
22
24
CLASS 8.8
lb-ft (N.m)
CLASS 9.8
lb-ft (N.m)
CLASS 10.9
lb-ft (N.m)
9
15
23
45
78
125
194
268
378
516
654
10
18
25
50
88
140
216
-----
13
21
31
61
106
170
263
364
515
702
890
GRADE-2
CLASS 8.8
(13)
(21)
(31)
(61)
(106)
(169)
(263)
(363)
(513)
(699)
(886)
GRADE-5
CLASS 9.8
9.8
8.8
Page 12
(14)
(24)
(34)
(68)
(118)
(189)
(293)
-----
GRADE-8
CLASS 10.9
10.9
(17)
(29)
(42)
(83)
(144)
(230)
(357)
(493)
(689)
(952)
(1206)
ATV SPRAYER FRAME ASSEMBLY
4
5
2
4
4
4
3
5
4
7
3
4
4
4
1
6
5
4
5
8
4
4
4
9
5
4
5
ASSEMBLY INSTRUCTIONS
10 (optional)
1.
Begin by laying the left (#1) and right (#2) main frames on the floor as shown,
lay the crossmembers (#3) in position between the side frames. Bolt the items
together, on the top side, using four 1/2" x 1-1/4" hex head bolts (#4) and four
1/2" nylon insert locknuts (#5). Now place the frame on something sturdy,
approximately 17"-18" off the floor, near the rear corners and the angled
tongue area of the frame. With four additional 1/2" x 1-1/4" hex head bolts (#4)
and locknuts (#5), bolt the crossmembers to the main frames on the bottom
side.
2.
Mount the hitch assembly to the front of the main frame as shown, using four
1/2" x 1-1/4" hex head bolts (#4) and nylon insert locknuts (#5). Mount it so the
clevis hitch or ball coupler (optional) will be approximately the same height as
the hitch on your ATV. Bolt the clevis hitch (#9) or the optional ball coupler
(#10) to the front hitch mount (#8) using six 1/2" x 1-1/4" hex head bolts (#4)
and nylon insert locknuts (#5).
3.
Bolt in the front crossmember (#6) using two 1/2" x 1-1/4" hex head bolts (#4),
two 1/2" flatwashers (#7) and 1/2" nylon insert locknuts (#5).
Page 13
AXLE ASSEMBLY
2
2
3
1
3
4
4
4
4
4
1
3
3
2
2
5
10
2.
6
7
12
ASSEMBLY INSTRUCTIONS
8
9
1.
11
Bolt the axle mounts (#1) to the left and
right main frame as shown, using four 1/2"
x 1-1/4" hex head bolts (#2), four 1/2"
flatwashers (#3) and 1/2" nylon insert locknuts (#4). NOTE: The axle mounts may be
moved backwards or forwards to obtain the
proper tongue weight.
Check set screws
and lug nuts DAILY.
3.
Continue by bolting the axle tube (#5) to
the axle mounts using two 1/2" x 3" square
u-bolts (#6) and four 1/2" nylon insert
locknuts (#4). NOTE: Be sure the weld-on
nuts are facing the rear of the sprayer. Also
center the axle tubes under the frame, this
is approximately 9.25" from the end of the
axle tube to the axle mount.
Safety stand assembly: Bolt the safety
stand mount (#7) to the tongue frame
using two 3/8" x 1-1/4" hex head bolts (#9),
two 3/8" flatwashers (#8) and 3/8" nylon
insert locknuts (#10). Insert the safety
stand (#11) into the mount and secure with
3/8" lock handle (#12).
AXLE INSERT INSTALLATION
1.
2.
X
3.
4.
3
2
2
ASSEMBLY INSTRUCTIONS
Insert two axle inserts (#1) into the axle tubes.
Select your particular wheel spacing using the
chart to figure the X dimension. The axle should
be inserted to this measurement.
Thread four 1/2" jam nuts (#3) onto the 1/2" x
1-1/2" square head set screws (#2). Tighten the
1/2" set screws into the weld-on nuts on the
back of the axle tube. Now tighten the jam nuts
against the weld-on nuts to secure everything in
place.
Mount the tires and rims (#4) to the axles using
four wheel nuts (#5) per rim.
Remove the frame from the supporting objects
and block the tires to prevent the sprayer from
rolling during the rest of the assembly.
3
1
5
Wheel
X
Spacing Dimension
Min.
Max.
66"
86"
4
6.5"
16.5"
Page 14
SADDLE ASSEMBLY AND TANK INSTALLATION
VIEW A
8
8
6
9
7
5
11
10
2
3
7
9
ASSEMBLY INSTRUCTIONS
1.
2
2.
2
3
2
5
1
3
3.
2
2
3
1
4.
4
4
4
4
4
Page 15
Bolt the saddle mounts (#1) to the frame,
in the location shown in the drawing, using
eight 1/2" x 1-1/4" hex head bolts (#2),
eight 1/2" flatwashers (#3) and eight 1/2"
nylon insert locknuts (#4).
Attach the tank saddles (#5) to the mounts
using four 1/2" x 1-1/4" hex head bolts (#2)
and four 1/2" nylon insert locknuts (#4).
Place tank (#6) in the saddles (#5) and be
sure the fillwell area of the tank is level.
Weave the a polyester strap (#8) through
two small strap anchors (#7), as shown in
View A, one on each end. Do the same for
the other strap.
Secure the tank in place by placing a strap
over each strap area on the tank, some
adjustment on the strap anchors maybe
necessary, and secure the anchors with
four 5/16" x 4" full thread bolts (#9), four
5/16” flatwashwers (#11), and four 5/16"
nylon insert locknuts (#10). NOTE: Be
sure not to over tighten the straps.
PANEL MOUNT ASSEMBLY
12
11
13
9
5
7
7
4
8
6
10
9
2
7
3
1
4
4
ASSEMBLY INSTRUCTIONS
1.
REF. PART
NO. NO. QTY.DESCRIPTION
- 5431-10 Panel Mount Assembly
1. 02148-30 1
Panel Mounting Bracket
2. 00523 2
3/8"-16 UNC x 1-1/4" Hex Head Bolt
3. 00059 2
3/8" Flatwasher
4. 02592 4
3/8"-16 UNC Nylon Insert Locknut
5. 02145-30 1
Panel Mount Collar
6. 03243-10 1
Vertical Valve Mounting Bracket
7. 00095 2
3/8”-16 UNC x 3/4” sq. head set screw
8. 02147-30 1
Female Stabilizer Brace
9. 00907 2
3/8"-16 UNC x 1" Hex Head Bolt
10. 02146-30 1
Male Stabilizer Brace
11. 05391-10 1
Panel Mount Stem
12. 00909 2
5/16"-18 UNC x 1-1/4" Square U-bolt
13. 02802 4
5/16"-18 UNC Nylon Insert Locknut
Please order replacement parts by PART NO. and DESCRIPTION.
Page 16
2.
3.
4.
Bolt the panel mounting bracket (#1) to tongue
frame using two 3/8" x 1" hex head bolts (#2),two
3/8" flatwashers (#3)and two 3/8" nylon insert
locknuts (#4).
Slide the panel mount collar (#5) over the vertical
valve mounting bracket (#6) and insert it into the
panel mount and secure with two 3/8" x 3/4" set
screws (#7).
Attach the female stabilizer (#8) to the panel
mount collar (#5) using a 3/8" x 1" hex head bolt
(#9) and a 3/8" nylon insert locknut (#4). Insert
the male stabilizer brace (#10) and and attach it
to the frame using a 3/8" x 1" hex head bolt (#9)
and a 3/8" nylon insert locknut (#4). Secure the
stabilizer brace and panel mount collar with two
3/8" x 3/4" set screws (#7).
Bolt the panel mount stem (#11) to the vertical
valve mounting bracket using two 5/16" x 1-1/4"
square u-bolt (#12) and four 5/16" nylon insert
locknuts (#13). NOTE: The panel mount stem
and vertical valve mounting bracket can slide,
before tightening bolts and set screws, to increase or decrease the reach of the stem.
WASH TANK ASSEMBLY
11
1
5
4
7
6
10
3
8
9
2
ASSEMBLED VIEW
ASSEMBLY INSTRUCTIONS
1.
2.
3.
Page 17
Attach the wash tank mounting tube (#1) to the tongue
frame using two 3/8" x 1-1/2" u-bolts (#2) and four 3/8"
nylon insert locknuts (#3).
Bolt the wash tank bracket (#4) to the mounting tube
(#1) using two 5/16" x 1-1/4" u-bolts (#5), four 5/16"
flatwashers (#6) and four 5/16" nylon insert locknuts
(#7). NOTE: The wash tank bracket can be mounted in
any position on the mounting tube that is convenient for
you.
Bolt the rubber tarp strap (#8) to the wash tank bracket
(#4), as shown, using a 1/4" x 1" carriage bolt (#9) and
1/4" nylon insert locknut (#10). Place the 2-1/2 gallon
wash tank (#11) into the tank bracket and secure by
placing the loose end of the strap (#8) over the peg on
top of the bracket (#4).
21' AND 28' TRUSS-T BOOM INSTALLATION
7
1
3
3
6
2
2
6
5
Truss-T Boom Center Section
6
Hardware included
with Truss-T Boom
ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
Attach the two boom mounting angles (#1) to the
frame in the holes furthest to the rear using four 1/2"
x 1-1/4" hex head bolts (#2) and four 1/2" nylon insert
locknuts (#3).
Bolt the boom brace angles (#4) between the frame
and the mounting angles in the holes shown, also
using four 1/2" x 1-1/4" hex head bolts (#2) and four
1/2" nylon insert locknuts (#3).
Bolt the boom adapter brackets (#5) to the mounting
angles (#1), as shown, using six 3/8" x 1" hex head
bolts (#6) and six 3/8" nylon insert locknuts (#7).
Attach the Truss-T boom center section as shown
using the hardware supplied with the boom.
ASSEMBLED VIEW
1
5
4
NOTE: You can raise or lower the boom by moving
the brackets (#5), moving the mounting angles
(#1), bolting the boom center section in the
high or low settings or any combination there
of.
Page 18
4
2
(OPTIONAL) HOSE REEL PARTS BREAKDOWN AND ASSEMBLY
5
9
14
11
7
11
13
6
3
8
8
4
8
3
8
4
8
3
3
2
10
12
1
2
1
(OPTIONAL) HOSE REEL PARTS LIST
REF.
NO.
PART
NO.
QTY.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
-
DHR
02129
02128
02592
03851-10
03279
00907
03332-10
00059
2AAL60
03850-10
00004
02178
02802
02990
BA1212
BA1234
BA3434
D3412
BM3400
BTT34
UV075FP
B8H
B12H
04193
340RB
120RB
2
4
8
2
1
4
1
8
1
1
4
4
2
2
1
1
1
1
2
1
1
2
2
2
-
DESCRIPTION
Hose Reel Assembly
1/2"- 13 UNC x 3” Square U-bolt
3/8"-16 UNC x 2" Square U-bolt
3/8"-16 UNC Nylon Insert Locknut
Hose Reel Mount Brackets
Hose Reel
3/8"-16 UNC x 1" Hex Head Bolt
Handgun Storage Bracket
3/8" Flatwasher
15" Hand Gun
Mounting Post of Hose Reel
5/16” Flatwasher
1/2”-13 UNC Nylon Insert Locknut
5/16”- 18 UNC Nylon Insert Locknut
5/16”-18UNC x 1” Hex Head Bolt
1/2" MPT x 1/2" Hose Barb Fitting (GFP)
1/2" MPT x 3/4" Hose Barb Fitting (GFP)
3/4" MPT x 3/4" Hose Barb Fitting (GFP)
3/4" MGHT x 1/2" Hose Barb Fitting
3/4" MPT Nipple Fitting (GFP)
3/4" FPT Tee (GFP)
3/4" FPT Poly Ball Valve
1/2" SS Gear Clamp
3/4" SS Gear Clamp
2" Cap Plug
3/4" I.D. Rubber Hose (14 ft.)
1/2" I.D. Rubber Hose (100 ft.)
ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
Bolt the mounting post (#10) to the axle, using two 1/2” x 3”
square U-bolts (#1), and four 1/2” nylon insert locknuts
(#12). When installing make sure you place the mounting
post and the U-bolts between the two axle set screws.
Mount the outside hose reel bracket (#4) flush with the
outside edge of the mounting post (#10) with one 3/8” x 2”
square U-bolt (#2), two 3/8” flatwashers (#8), and two 3/8”
nylon insert locknut (#3). Mount the inside hose reel
bracket on the other side of the vertical member of the
mounting post (#10), leaving a 9” spacing between the
bolts holes.
Place the hose reel (#5) on top of the mounts and secure
with four 3/8" x 1" hex head bolts (#6) and four 3/8" nylon
insert locknuts (#3).
The handgun storage bracket (#7) is already installed at the
factory.
NOTE:
Diagram shows left handed hose reel assembly, for
clarity purposes. Hose reel may be mounted right handed
style if desired.
Please order replacement parts by PART NO. and DESCRIPTION.
Page 19
110 & 150 GALLON ATV SPRAYER PARTS BREAKDOWN
46
48
50
45
49
51
24
12
4
6
4
BOOM MOUNTS (REAR VIEW)
4
4
6
24
6
5
4
6
23
17
5
4
6
23
25
44
4
4
6
5
4
4
26
5
44
4
53
27
5
5
4
4
5
30
2
8
5
5
9
5
3
29
4
31
7
17
44
11
1
10
11
32
10
43
5
4
4
13
4
33
22
14
4
52
20
37
12 9
16
Page 20
42
58
41
18
21
38
54
55 56
59
47
34
28
19
39
60
35
5
40
57
61
36
4
5
15
ATV SPRAYER PARTS LIST
REF. PART
NO. NO. QTY.
1. 03233-10 1
2. 03234-10 1
3. 03235-10 2
4. 00967 41
5. 02178 44
6. 00085 12
7. 03237-10 1
8. 02990
2
9. 00004
8
10. 00639
4
11. 00640
4
12. 02802 10
13. 03241-10 1
14. 03253-10 1
15. 03252-10 1
16. 02529
2
17. 02592 12
18. 05615-30 2
19. 04742
1
20. 04177
1
21. 02772
1
22. 05616
1
PL2S
1
23. 03236-10 2
24. 02285-10 2
- 02623-10 2
25. 01792-30 2
26. 02693-30 2
27. 03275-10 2
28. 00523
2
29. 03286-10 2
30. 03285-10 1
31. 02129
2
32. 03831-10 2
33. 02148-30 1
34. 00059
2
35. 03883-10 1
36. 01404-95 1
37. 03833-10 2
38. 01675-95 2
39. 00084
2
40. 01796
2
41. 03830-10 2
42. 03832-10 2
43. 00060
4
44. 00907
6
45. P150 30A 1
- P110 24A 1
46. 5478R
1
PL5R
1
5433E
1
47. 00909
2
48. 04353
2
49. 05785-95 4
50. 04352
4
51. 00004
4
52. 03242-10 1
53. 5389
4
DESCRIPTION
Left Main Frame
Right Main Frame
Bolt-In Cross Member
1/2"-13 UNC x 1-1/4" Hex Head Bolt
1/2"-13 UNC Nylon Insert Locknut
1/2” Flatwasher
Front Cross Member
5/16"-18 UNC x 1" Hex Head Bolt
5/16” Flatwasher
1/2"-13 UNC x 1-1/2" Sq Head Set Screw
1/2"-13 UNC Jam Nut
5/16"-18 UNC Nylon Insert Locknut
Front Hitch Mount
Bolt-On Clevis Hitch
Wash Tank Mounting Tube
3/8”-16 UNC x 2-1/2” U-bolt
3/8"-16 UNC Nylon Insert Locknut
Wash Tank Bracket
Tarp Strap
1/4"-20 UNC x 1" Carriage Bolt
1/4" Nylon Insert Locknut
2-1/2 gal. Wash Tank
2-1/2 gal. Wash Tank Lid
Saddle Mount
24” Saddles (110 gal. Tank)
30” Saddles (150 gal. Tank)
Boom Mounting Angle
Boom Brace Angle
Boom Adapter
3/8"-16 UNC x 1-1/4" Hex Head Bolt
Axle Mount
Axle Tube
1/2"-13 UNC x 3" Square U-bolt
Axle Insert (less hub assembly)
Safety Stand Mount
3/8” Flatwasher
Safety Stand
3/8” Lock Handle
Pivot Pin
Pivot Pin Washer
1/2” Lockwasher
REF. PART
NO. NO. QTY.DESCRIPTION
5416
4
4-Bolt Hub Assembly
54. 00890 4
1/2”-13 UNF Wheel Nuts
55. 01748 2
Inner & Outer Bearing Races
56. 01749 2
Inner & Outer Wheel Bearings
57. 01751 1
Dust Cap
58. 02363 1
5/32” x 1-1/4” Cotter Pin
59. 03428 1
Hub Seal
60.
1
4-Bolt Hub (NOT SOLD SEPERATELY)
61. 03193 1
1”-14 UNF Castle Nut
1/2”-13UNCx1-1/4” Hex Blt. w/grease Zerk
Walking Beam
Pivot Stop Plate
3/8” Lockwasher
3/8”-16 UNC x 1” Hex Head Bolt
150 Gal. Poly Tank w/lid, fittings, & agitation
110 Gal. Poly Tank w/lid, fittings, & agitation
10” Lid for 150 Gal. (Replacement)
5” Lid for 110 Gal. (Replacement)
Gasket for PL5R Lid (Replacement)
5/16”-18 UNC x 1-3/8”x1-7/8” U-Bolt
1-3/4” x 50” Black Nylon Strap
1-3/4” Strap Anchor
5/16”-18 UNC x 4” Full Thread Hx Blt.
5/16” Flatwasher
Bolt-On Ball Couple (Optional)
Rim w/mounted tire
Please order replacement parts by PART NO. and DESCRIPTION.
Page 21
ROLLER PUMP PLUMBING PARTS BREAKDOWN
NOTE: The DBHGL Handgun Kit is
installed, as shown on page 25, in
this location.
e
a
b 33
c
d
17
34
c
16
21
21
25
16
24
2537
35
b
a
b
a
24
c
D
28
27
24
22
14
24
17
15
22
21
5
12
13
32
11
17
29
21
1
10
3
9
6
9
8
4
21
32 26
9
20
2
8
22 23
31
2
8
23
15
30
b
2
8
22
30
d
37
A 32
c
7
36
41
29
a
39
38
42
25
40
40
C
18
19
B
29
MANUAL CONTROL
9465037
ELECTRIC CONTROL
9465038
C6500D ROLLER PUMP
48
C6500D ROLLER PUMP PARTS LIST
49
57
50
52
51
58
54
55
53
59
56
60
61
NOTE: When a PTO driven roller pump (C6500D) is ordered, these
parts shown above replace parts utilized when a gas engine roller
pump (C4101GE) is ordered.
REF.
PART
NO.
NO.
QTY.
DESCRIPTION
48.
EL3410
1 3/4" MPT x 1" Elbow Fitting (GFP)
49.
C6500
1 Roller Pump (only)
1321 0012
1 Quick Coupler Adapter (540 RPM PTO)
50.
04298-70
1 Pump Mounting Angle
51.
04305
2 5/16"-18 UNC x 1/2" Hex Head Bolt (Gr.5)
52.
00036
2 5/16" Lockwasher
53.
04299
1 Roller Pump Chain w/ S-hook
54.
01076
1 1/4"-20 UNC x 3/4" Hex Head Bolt
55.
00214
1 1/4" Flatwasher
56.
02772
1 1/4"-20 UNC Nylon Insert Locknut
57.
BEL3434
1 3/4" MPT x 3/4" Elbow Fitting (GFP)
58.
02990
1 5/16"-18 UNC x 1" Hex Head Bolt (Gr.5)
59.
00857-30
1 Roller Pump Storage Bracket
60.
00004
1 5/16" Flatwasher
61.
02802
1 5/16"-18 UNC Nylon Insert Locknut
Please order replacement parts by PART NO. and DESCRIPTION.
Page 22
REF.
NO.
PART
NO.
QTY.
DESCRIPTION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
-
C4101GE
00036
00004
00372
01872
02653-70
02650-10
02660-70
02802
02990
04305
04880-95
07174
C4101
XL4101
GE3HP
GH4HP
1
2
8
4
1
1
1
1
9
5
2
1
4
1
1
1
1
Roller Pump w/ 3.5 HP Gas Engine
5/16” Lockwasher
5/16” Flatwasher
5/16”-18 UNC x 1-1/2” Hex Head Bolt
Rubber Bumper
Shaft Shield
Gas Engine/Pump Mounting Plate
Roller Pump Mounting Plate
5/16"-18 UNC Nylon Insert Locknut
5/16"-18 UNC x 1" Hex Head Bolt
5/16"-18 UNC x 1/2" Hex Head Bolt
Pump/Engine Coupler
1/4”-20 UNC x 3/4” Sq. Head Set Screw
Roller Pump
Silver Cast Roller Pump
3.5 HP Briggs & Stratton Gas Engine
4 HP Honda Gas Engine
15.
16.
17.
18.
2.
19.
8.
9.
20.
21.
22.
23.
24.
25.
26.
27.
1010RB
120RB
340RB
8460
AB8460
00004
02592
02802
02990
05596-95
B12H
B20H
B24H
B8H
BA3412
BA3434
BEL114 1
1
5
4
9
5
1
10
4
2
4
3
1
1
Plumbing Package
1” I.D. Rubber Hose
1/2" I.D. Rubber Hose
3/4" I.D. Rubber Hose
Pressure Relief Valve
Pressure Relief Valve Repair Kit
5/16” Flatwasher
3/8"-16 UNC Nylon Insert Locknut
5/16"-18 UNC Nylon Insert Locknut
5/16"-18 UNC x 1" Hex Head Bolt
Plumbing Hanger
3/4” SS Gear Clamp
1” SS Gear Clamp
1-1/4” SS Gear Clamp
1/2” SS Gear Clamp
3/4" MPT x 1/2" Hose Barb Fitting (GFP)
3/4" MPT x 3/4" Hose Barb Fitting (GFP)
1-1/4” MPT x 1” Elbow Fitting
28.
29.
30.
31.
32.
*33.
*34.
*35.
*36.
37.
38.
39.
40.
41.
42.
BEL1212
BEL3434
BM3400
BTT34
EL3410
D3371PS
P114PAV
P012D
RVF34 80
UV075FP
00059
00523
AA17I
9465038
160GB
BA1234
1
3
2
1
3
1
1
1
1
2
2
2
1
1
1
3
1/2" MPT x 1/2" Elbow Fitting (GFP)
3/4" MPT x 3/4" Elbow Fitting (GFP)
3/4” MPT Nipple Fitting (GFP)
3/4” FPT Tee (GFP)
3/4” x MPT x 1” Elbow Fitting (GFP)
Tank Double Agitation
1-1/4” Tank Outlet Fittings
1/2” Tank Fittings
3/4” Line Strainer w/80 Mesh Screen
3/4” Poly Ball Valve
3/8" Flatwasher
3/8"-16 UNC x 1-1/4" Hex Head Bolt
Three Section Tee Valve
Electric Control Valves
160 lb. Brass Gauge
1/2” MPT x 3/4” Hose Barb Fitting (GFP)
33.
a.
b.
c.
d.
e.
D3371PS
00128
5044 1
FC1200
M1200
R1212
1
2
2
1
1
1
Double Agitation Breakdown
1/2” Retainer for Agitaion Wand (not shown)
Jet Agitation Wand
1/2” FPT Coupling
1/2” MPT Short Nipple
1/2" MPT Tee
34.
a.
b.
c.
P114PAV
5078V
CP114PAV
N8P
1
1
1
1
1-1/4” Tank Outlet Breakdown
Large Viton O-ring
1-1/4” Anti-Vortex Center Portion
Large Nut for Tank Fitting
35.
a.
b.
c.
P012D
5077V
CP012PD
N5P
1
1
1
1
1/2” Tank Fitting Breakdown
Small Viton O-ring
Center Portion for 1/2” Double Thread
Small Nut for Tank Fitting
36.
RVF34 80
1
a.
RVF34B
1
b.
RVF34C
1
c.
RVF34GV
1
d.
RVF380
1
NOTE: *=Further Part
3/4” Line Strainer Breakdown
Strainer Bowl
Strainer Cap
Viton O-ring
80 Mesh Screen
Breakdown
OPERATING INSTRUCTIONS
C4001 ROLLER PUMP
64
62
Fill the tank with water.
2.
Open the Ball valve (A) in the pump intake line.
3.
Open (counter clockwise) the pressure relief
valve (B).
4.
Open the Tee valve (C) so that all the boom
sections are spraying.
5.
Open the agitation valve (D).
6.
Start and run pump.
7.
Slowly close the pressure relief valve (B) until the
desired spraying pressure is reached with the
boom spraying.
8.
If adequate spraying pressure cannot be reached,
slowly close the agitation valve (D) until the
desired spraying pressure is reached.
9.
Check for leaks.
63
66
66
65
1.
65
Special 2000 RPM PTO Adaptor for 4
wheeler w/PTO and some garden tractors.
REF.
NO.
PART
NO.
QTY.
62.
63.
64.
65.
66.
04298-70
05327
C4001
XL4001
04305
00036
1
1
1
1
2
2
DESCRIPTION
4001 Pump Mounting Bracket
2000 RPM Spline w/set screws
4001 Roller Pump
Silver Cast 4001 Roller Pump
5/16"-18 UNC x 1/2" Hex Head Bolts
5/16" Lockwasher
Page 23
CENTRIFUGAL (DHC155) PUMP PLUMBING PARTS BREAKDOWN
e
a
b
28
c
d
8
29
30
b
a
b
a
c
13
c
21
16
19
7
15 32
15
5
14
24
6
14
20
24
1
2
3
15
38
23
26
14 15
11
16
12
25
3
15
23
b
d
26
14
c
3
18
15
9
6
9
A
18
22
C
4
19
37
7
31
a
NOTE: The DBHGL Handgun Kit is
installed, as shown on page 25, in
this location.
34
33
36
17
27
27
38
B
35
D
35
10
23
MANUAL CONTROL
9465037
ELECTRIC CONTROL
9465038
Page 24
26
CENTRIFUGAL (DHC155) PUMP PLUMBING PARTS LIST
REF.
NO.
PART
NO.
1.
2.
3.
4.
5.
-
DHC155
00372
02650-10
02802
QTY.
DESCRIPTION
1
4
1
4
1
1
1
Centrifugal Pump w/5 HP Gas Engine
5/16"-18 UNC x 1-1/2" Hex Head Bolt
Gas Engine/Pump Mounting Plate
5/16"-18 UNC Nylon Insert Locknut
Centrifugal Pump
5 HP Briggs & Stratton Gas Engine
5.5 HP Honda Gas Engine (optional)
DHC155
GE5HP
GH5.5HPT
- Plumbing Package
6.
1010 RB
- 1" I.D. Rubber Hose
7.
1140RB
- 1-1/4” I.D. Rubber Hose
8.
340RB
- 3/4" I.D. Rubber Hose
9.
00004
5 5/16” Flatwasher
10.
02592
3 3/8"-16 UNC Nylon Insert Locknut
3.
02802
13 5/16"-18 UNC Nylon Insert Locknut
11.
02990
5 5/16"-18 UNC x 1" Hex Head Bolt
12.
05596-95
1 Plumbing Hanger
13.
B12H
6 3/4” SS Gear Clamp
14.
B16H
4 1” SS Gear Clamp
15.
B24H
6 1-1/4” SS Gear Clamp
16.
B8H
2 1/2” SS Gear Clamp
17.
BA1234
3 1/2” MPT x 3/4” Hose Barb Fitting (GFP)
18.
BA114
2 1-1/4” Hose Barb Fitting (GFP)
19.
BEL114
2 1-1/4” MPT Elbow Fitting (GFP)
20.
BEL114 1
1 1-1/4” MPT x 1” Elbow Fitting (GFP)
21.
BEL1212
1 1/2" MPT x 1/2" Elbow Fitting (GFP)
22.
BEL3412
1 3/4” MPT x 1/2” Elbow Fitting (GFP)
23.
BM3400
3 3/4” MPT Nipple Fitting (GFP)
24. BRB112 114 2 1-1/2" MPT x 1-1/4" FPT Reducer (GFP)
25.
BTT34
1 3/4” FPT Tee (GFP)
26.
EL3410
2 3/4” MPT x 1” Elbow Fitting (GFP)
27.
*28.
*29.
*30.
*31.
32.
33.
34.
35.
36.
F3400
D3371PS
P114PAV
P012D
RVF34 80
UV125FP
00059
00523
AA17I
9465038
100GB
2
1
1
1
1
1
2
2
1
1
1
3/4” FPT Plug
Tank Double Agitation
1-1/4” Tank Outlet Fittings
1/2” Tank Fittings
3/4” Line Strainer w/80 Mesh Screen
1-1/4” Poly Ball Valve
3/8" Flatwasher
3/8"-16 UNC x 1-1/4" Hex Head Bolt
Threee Section Tee Valve
Electric Valve Control
100 lb. Brass Gauge
28.
a.
b.
c.
d.
e.
D3371PS
00128
5044 1
FC1200
M1200
R1212
1
2
2
1
1
1
Double Agitation Breakdown
1/2” Retainer for Agitaion Wand (not shown)
Jet Agitation Wand
1/2” FPT Coupling
1/2” MPT Short Nipple
1/2" MPT Tee
29.
a.
b.
c.
P114PAV
5078V
CP114PAV
N8P
1
1
1
1
1-1/4” Tank Outlet Breakdown
Large Viton O-ring
1-1/4” Anti-Vortex Center Portion
Large Nut for Tank Fitting
30.
a.
b.
c.
P012D
5077V
CP012PD
N5P
1
1
1
1
1/2” Tank Fitting Breakdown
Small Viton O-ring
Center Portion for 1/2” Double Thread
Small Nut for Tank Fitting
31.
a.
b.
c.
d.
RVF34 80
RVF34B
RVF34C
RVF34GV
RVF380
1
1
1
1
1
3/4” Line Strainer Breakdown
Strainer Bowl
Strainer Cap
Viton O-ring
80 Mesh Screen
NOTE: *=Further Part Breakdown
Please order replacement parts by PART NO. and DESCRIPTION.
OPERATING INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Run approximately 50 gallons of water into the tank.
Open the poly ball valve (A) in the pump intake line. Important: Remove
top plug on pump to bleed all air from the suction line to the pump or
damage will result to the seals. (Pump cannot be run dry).
Open the wedge valve (B) on the Tee valve.
Close the wedge agitation valve (C) on the plumbing subassembly.(Located on the front crossmember.)
Turn the Tee valve handle (D) so all three boom sections are open.
Start the pump and run at approx. 540 RPM.
Open the wedge valve (B) on the Tee valve until the gauge reads 7-10
PSI over your desired spraying pressure with all three boom sections
spraying. NOTE: The spraying pressure may vary depending on the size
of tip and the chemical being sprayed.
8. Open the wedge agitation valve (C) until the gauge drops to your desired
spraying pressure.
Example: If desired spraying pressure is 30 PSI open the wedge valve
on Tee valve until the pressure reads 37 PSI. After this, open the wedge
agitation valve until the gauge drops back to 30 PSI. (This is to ensure
the recommended pressure to tank jet agitators).
9. Check for leaks.
10. Check tip wear and pressures periodically.
(DBHGL) 15" HANDGUN KIT PARTS BREAKDOWN
(DBHGL) 15" HANDGUN KIT PARTS LIST
NOTE: The Hand Gun
Holder and Hose Holder are
attached to the Vertical
Panel Mount shown on
page 16.
8
10
5
1
7
6
2
5
10
3
9
4
2
1
REF.
NO.
PART
NO.
QTY
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
03283
02802
BM3400
BTT34
B6H
380RB
05595-70
2AAL60
UV075FP
D3438
2
4
2
1
2
25ft
1
1
1
2
DESCRIPTION
5/16"-18 UNC x 2” U-Bolt
5/16"-18 UNC Nylon Insert Locknut
3/4" MPT Nipple Fitting (GFP)
3/4" FPT Tee (GFP)
3/8" SS Gear Clamp
3/8" I.D. Rubber Hose
Hose/Gun Holder Rack
15" Hand Gun
3/4" FPT Poly Ball Valve
3/4" MGHT x 3/8" Hose Barb
Please order replacement parts by PART NO. and DESCRIPTION.
3
Page 25
DIAPHRAGM PUMP PLUMBING PARTS BREAKDOWN
e
a
b
25
c
d
b
6
b
26
27
a
a
c
c
16
19
23 14
21
16
7
5
16
14
29 1316
4
16
7
8
14
1
16
7
23
23
2
16
14 11 12
9
13
14
11
3
8
10
20
15
8
9
18 b
d
29
18
3
28
23
14
c
a
NOTE: The DBHGL Handgun Kit is
installed, as shown on page 25, in
this location.
33
31
30
17
34
34
32
22
32
ELECTRIC CONTROL
9465038
10
ELECTRIC CONTROL
9465038
Page 26
NOTE: For ordering the circled
replacement fittings for the
diaphragm pump refer to the
diaphragm pump parts breakdown on page 28 for the necessary part numbers.
DIAPHRAGM PUMP PLUMBING PARTS LIST
REF.
NO.
PART
NO.
1.
2.
3.
4.
5.
-
CN9699
00372
02650-10
02802
6.
7.
8.
9.
10.
3.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
D19GRGIGE
GE3HP
GH4HP
120RB
380RB
580RB
00004
02592
02802
02990
05596-95
A3438
B12H
B24H
B8H
BA1212
BM3400
BRB114 34
BTT34
EL1238
EL3438
EL3458
T12
QTY.
1
4
1
4
1
1
1
5
4
9
5
1
2
6
2
12
1
2
1
1
1
1
4
3
DESCRIPTION
Diaphragm Pump w/ 3.5 HP Gas Engine
5/16"-18 UNC x 1-1/2" Hex Head Bolt
Gas Engine/Pump Mounting Plate
5/16"-18 UNC Nylon Insert Locknut
Diaphragm Pump
3.5 HP Briggs & Stratton Gas Engine (std.)
4 HP Honda Gas Engine (optional)
Plumbing Package
1/2" I.D. Rubber Hose
3/8” I.D. Rubber Hose
5/8" I.D. Rubber Hose
5/16” Flatwasher
3/8"-16 UNC Nylon Insert Locknut
5/16"-18 UNC Nylon Insert Locknut
5/16"-18 UNC x 1" Hex Head Bolt
Plumbing Hanger
3/4” MPT x 3/8” Hose Barb Fitting
3/4” SS Gear Clamp
1-1/4” SS Gear Clamp
1/2” SS Gear Clamp
1/2" MPT Hose Barb Fitting (GFP)
3/4” MPT Nipple Fitting (GFP)
1-1/4" MPT x 3/4" FPT Reducer (GFP)
3/4” FPT Tee (GFP)
1/2” MPT x 3/8” Elbow Fitting (GFP)
3/4” x MPT x 3/8” Elbow Fitting
3/4” MPT x 5/8” Elbow Fitting
1/2” Hose Barb Insert Tee (not shown)
NOTE: The (T12 ) 1/2" hose barb insert tees replace the
3/4" insert tees that are shipped with the Truss-T
boom.
*25.
*26.
*27.
*28.
29.
30.
31.
32.
33.
34.
D3371PS
P114PAV
P012D
RVF34 80
UV075FP
00059
00523
AA17I
9465038
160GB
F3400
1
1
1
1
2
2
2
1
1
1
2
Tank Double Agitation
1-1/4” Tank Outlet Fittings
1/2” Tank Fittings
3/4” Line Strainer w/80 Mesh Screen
3/4” Poly Ball Valve
3/8" Flatwasher
3/8"-16 UNC x 1-1/4" Hex Head Bolt
Threee Section Tee Valve
Electric Control Valve
160 lb. Brass Gauge
3/4” FPT Cap
25.
a.
b.
c.
d.
e.
D3371PS
00128
5044 1
FC1200
M1200
R1212
1
2
2
1
1
1
Double Agitation Breakdown
1/2” Retainer for Agitaion Wand
Jet Agitation Wand
1/2” FPT Coupling
1/2” MPT Short Nipple
1/2" MPT Tee
26.
a.
b.
c.
P114PAV
5078V
CP114PAV
N8P
1
1
1
1
1-1/4” Tank Outlet Breakdown
Large Viton O-ring
1-1/4” Anti-Vortex Center Portion
Large Nut for Tank Fitting
27.
a.
b.
c.
P012D
5077V
CP012PD
N5P
1
1
1
1
1/2” Tank Fitting Breakdown
Small Viton O-ring
Center Portion for 1/2” Double Thread
Small Nut for Tank Fitting
28.
a.
b.
c.
d.
RVF34 80
RVF34B
RVF34C
RVF34GV
RVF380
1
1
1
1
1
3/4” Line Strainer Breakdown
Strainer Bowl
Strainer Cap
Viton O-ring
80 Mesh Screen
NOTE: *=Further Part Breakdown
OPERATION INSTRUCTIONS
1. Be sure oil is halfway up the clear oil sight tube. If
necessary, fill to correct level with 30 weight nondetergent motor oil.
2. Make sure the suction hose barb is tightly screwed onto
the suction union, and that there are no air leaks on the
inlet side of the pump.
3. Check the charge pressure on the pulsation damper
before starting the pump. The pressure is checked with
a standard automotive air gauge. The pressure should
be at approximately 20% of the maximum operating
pressure with a minimum charge of 10 PSI.
6. Adjust pump to desired pressure by changing the relief
valve setting on the control unit, relief valve or unloader.
First back out relief valve adjustment knob to zero.
Then rotate red bypass selector knob so that the letter
C is in the 12 o'clock position. Adjust pressure by
rotating relief valve adjustment knob to desired pressure.
MAINTENANCE INSTRUCTIONS
1. After use, flush pump with clean water.
4. Allow the pump to start under low pressure by removing
restrictions on the outlet of the pump. The restriction on
the pump is removed by rotating the red knob on the
control unit so that the letter A on the knob is in the 12
o'clock position.
2. Change oil and diaphragms every 500 hours. To drain
oil from the pump, remove cap from oil sight tube, turn
pump upside down and rotate the shaft until oil stops
flowing out. To fill pump with oil, slowly pour oil into sight
tube while turning the pump shaft. Turning the pump
shaft purges all the air out of the crankcase. Always
change oil when replacing diaphragms.
5. Start pump and let run for approximately one minute at
low pressure. Stop pump and check the oil level in sight
glass. Add 30 weight non-detergent oil if necessary.
3. For winter storage or if a freezing condition will be
encountered, flush pump with a 50/50 mixture of water
and antifreeze.
Page 27
DIAPHRAGM PUMP (D19GR) PARTS BREAKDOWN
49
70
76
71
75
74
58
68
72 1
73
59
70
63
6
5
7
77
8
4
3
2
65
12
10
55
54
56
69
66
68
65
13
61
47
46
53
45
52
67
42
51
44
13
50
66
11
9
48
13
24
57
25
18
29
17
14
21
22
31
27
34
37
36
32
39 38
35
26
28
13
15
40
43
30
23
64
41
16
DIAPHRAGM PUMP (D19GR) PARTS LIST
REF.
NO.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
PART
NO.
9910 800380
9910 800020
9910 800171
9910 800160
9910 800150
9910 800370
9910 800200
9910 800180
9910 800120
9910 800140
9910 800130
9910 480370
9910 480440
9910 680360
9910 800220
9910 800100
9910 800090
9910 800350
9910 800085
9910 800110
9910 740290
9910 800320
9910 800520
9910 390180
9910 550450
9910 800340
9910 800540
9910 800400
9910 550331
9910 800410
9910 800430
9910 800500
9910 800510
9910 390330
9910 800560
9910 800490
9910 800530
9910 800670
9910 800680
9910 770140
QTY.
2
1
1
1
2
2
1
1
2
2
2
1
7
1
7
2
2
2
2
2
1
1
2
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
O-ring B, D
Front Housing
Crankshaft for G.R. Version
Spacer Washer
Spring Locking Clip
Retainer Knob
Seal
Roller Bearing
Piston
Connecting Rod
Connecting Rod Pin
Roller Bearing
O-ring A, B, C
Oil Tube Bolt
Head Bolt
Head
Diaphragm Retaining Bolt
Diaphragm Supporting Washer
Diaphragm A
Piston Sleeve
O-ring B
Oil Sight Glass
Barb Nut
O-ring B
Barb Nut
5/8" Inlet Elbow Hose Barb
1/2" Outlet Hose Barb
Relief Valve Body (w/Valve Seat)
Lockwasher
Bolt (6MA x 40)
Floating Valve
Locking Bolt
Locking Bolt Cap
Locking Pin
O-ring B
Positioning Rod
3/8" Outlet Hose Barb
5/8" Bypass Barb
Barb Nut
O-ring
REF.
NO.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
PART
NO.
9910 800480
9910 800440
9910 800450
9910 800460
9910 800470
9910 480550
9910 800010
9910 800330
9910 800190
9910 800230
9910 800650
9910 390340
9910 540290
9910 800210
9910 800360
9910 800590
9910 800311
9910 809060
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
1
1
1
63.
64.
65.
66.
67.
68.
69.
9910 809050
9910 800060
9910 200540
-
2
2
4
4
2
4
2
Complete Valve Assembly
Check Valve Cage (Inlet)
Poppet
Tension Spring
Check Valve Seat
O-ring B, C
Check Valve Cage (Outlet)
70.
71.
72.
73.
74.
75.
76.
77.
9910
9910
9910
9910
9910
9910
9910
9910
620301
390440
800280
800810
800820
800800
480820
620440
2
4
1
1
1
1
1
4
Plug
Nut
Gear
Driver Gear
Body
Locating Bolt
Seal D
Bolt
9910 KIT1923
9910 KIT1913
9910 KIT1914
9910 KIT1950
-
Repair Kits
Diaphragm Kit (items marked “A”)
O-Ring Kit (items marked “B”)
Valve Kit (items marked “C”)
Gear Box Seal Kit (items marked “D”)
-
DESCRIPTION
Indicator Scale
Relief Valve Seat Holder
Tension Spring
Relief Valve Plunger
Adjustment Cap (Relief Valve)
Retainer Ring
Pump Body
Cap for Oil Sight Glass
Accumulator Diaphragm A
Accumulator Head
Air Valve Assembly
O-ring B
Bolt (8MA x 35)
O-ring A, B
Valve Cap
Key
Base Plate
Complete Relief Valve Assembly
C
Please order replacement parts by PART NO. and DESCRIPTION.
Page 28
ROLLER PUMP PARTS BREAKDOWN
CAST IRON C4101 & C4001
SILVER CAST XL4101 & XL4001
2
11
3
10
8
9
7
13
5
4
3
2
1
6
SILVER CAST ROLLER PUMP PARTS LIST
XL4101 & XL4001
CAST IRON ROLLER PUMP PARTS LIST
C4101 & C4001
REF.
NO.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
-
PART
NO.
QTY.
DESCRIPTION
0600
1 Name Plate (specify pump model #.)
BAC37
2 Sealed Ball Bearing
*2107 0002
2 Viton Seal (standard)
0200 4101C 1 End Plate (cast iron)w/standard seal
0200 4001C 1 End Plate (cast iron) w/standard seal
*1720 0104
1 O-ring Gasket for End Plate
2200 0009
4 End Plate Screw
0300 4101C 1 Rotor (cast iron)and Shaft Assembly
0300 4001C 1 Rotor (cast iron) and Shaft Assembly
0500 6600
1 Shaft ONLY
2230 0002
1 Rotor Set Screw
1005 0004
4 Super Rollers (standard)
*1002 0002
4 Polypropylene Rollers (optional)
0100 4101C 1 Body (cast iron) w/standard seal
0100 4001C 1 Body (cast iron) w/standard seal
05327
1 1" x 15 Spline Adapter Shaft for
2000 RPM PTO w/set screws
C4001 ONLY
3430 0158
Repair Kit: contains items marked (*)
REF.
PART
NO.
NO.
QTY.
DESCRIPTION
1.
0600
1 Name Plate (specify pump model #)
2.
BAC37
2 Sealed Ball Bearing
3.
*2107 0002
2 Viton Seal (standard)
4.
0200 4101X 1 End Plate (silver cast) w/standard seal
0200 4001X 1 End Plate (silver cast) w/standard seal
5.
*1720 0104
1 O-ring Gasket for End Plate
6.
2200 0009
4 End Plate Screw
7.
0300 4101X 1 Rotor (silver cast) and shaft assembly
0300 4001X 1 Rotor (silver cast) and shaft assembly
0500 6600
Shaft ONLY
8.
2230 0002
1 Rotor Set Screw
9.
1005 0004
4 Super Rollers (standard)
*1002 0002
4 Polypropylene Rollers (optional)
10. 0100 4101X 1 Body (silver cast) w/standard seal
0100 4001X 1 Body (silver cast) w/standard seal
11.
05327
1 1" x 15 Spline Adapter Shaft for
2000 RPM PTO w/set screws
XL4001 ONLY
3430 0158
Repair Kit: contains items marked (*)
Page 29
PTO DRIVEN ROLLER PUMP PARTS LIST
CAST IRON C6500D
SILVER CAST XL6500
2
3
9
10
6
8
7
5
CAST IRON ROLLER PUMP PARTS LIST
C6500D
4
3
2
1
SILVER CAST ROLLER PUMP PARTS LIST
XL6500
REF.
NO.
PART
NO.
QTY.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
-
0600
BAC37
*2107 0002
0200 6600X
*1720 0008
*1005 0004
1002 0004
0300 6600X
0500 6600
0100 6600X
1321 0012
3430 0380
1
2
2
1
1
6
6
1
1
1
1
-
DESCRIPTION
Name Plate (specify pump model no.)
Ball Bearing (sealed)
Viton Seal (standard)
End Plate (Silver Cast) (includes Seal #3)
O-ring for End Plate
Super Roller
Polypropylene Roller (optional)
Rotor with Shaft (Silver Cast)
Shaft Only
Body (Siver Cast) (includes Seal #3)
Quick Coupler Adapter-Multi Speed
Repair Kit: contains items marked (*)
REF.
NO.
PART
NO.
QTY.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
-
0600
BAC37
*2107 0002
0200 6600C
*1720 0008
*1005 0004
1002 0004
0300 6600C
0500 6600
0100 6600C
1321 0012
3430 0380
1
2
2
1
1
6
6
1
1
1
1
-
DESCRIPTION
Name Plate (specify pump model no.)
Ball Bearing (sealed)
Viton Seal (standard)
End Plate (includes Seal #4)
O-ring for End Plate
Super Roller
Polypropylene Roller (optional)
Rotor with Shaft
Shaft Only
Body (includes Seal #4)
Quick Coupler Adapter-Multi Speed
Repair Kit: contains items marked (*)
CENTRIFUGAL PUMP PARTS LIST
DHC155
9
8
6
7
4
5
CENTRIFUGAL PUMP PARTS LIST
DHC155
REF.
NO.
PART
NO.
QTY.
1.
2.
3.
4.
5.
6.
7.
8.
9.
-
2404 0007
0153 9200C
0404 9200P
*1700 0121
*1720 0180
*2120 0034
0707 9200
2210 0098
2210 0086
3430 0464
4
1
1
1
1
1
1
4
6
-
3
DESCRIPTION
Drain Plug
Pump Casing
Impeller (Nylon)
Inner O-Ring
Outer O-Ring
Mechanical Seal (Viton)
Flange
Engine Mounting Bolt
Pump Case Bolt
Repair Kit: contains items marked (*)
Page 30
1
2
HAND GUN PARTS BREAKDOWN
HAND GUN (ONLY) PARTS LIST
REF.
NO.
1
2
3
4 5
6
8
7
9 10
15
14
10
13
11 12
1.
2.
3.*
4.
5.*
6.
7.*
8.
9.*
10.*
11.*
12.*
13.
14.
15.
16.
17.*
18.
19.
20.
21.
22.*
23.
24.*
16
24
17
18
19
20
21
23
22
(AA17I) TEE VALVE PARTS LIST
REF.
NO.
1.
2.
2.A
* 3.
* 4.
5.
* 6.
7.
8.
* 9.
10.
* 11.
* 12.
13.
14.
15.
16.
17.
18.
19.
20.
* 21.
22.
PART NO.
8012 1/2SS
6849IZP
15490SS
7206IZP
6976IZP
12128IZP
12127CE
12129CE
6972SS
7980IZP
12126AL
6975BU
5809LEA
12130SS
7254SS
7987SS
6971AL
6973SS
6959SS
6956CE
6934 6AL
6958POL
7262AL
AB17
PART NO.
2AAL60
5804AL
6106AL
5805BU
AYHSS- - 5800AL
5735SS
5797AL
5801AL
5799AL
4784AL
5798NY
5802AL
5814SS
5819AL
5818AL
5792AL
5809LEA
6157ALEF
5794AL
5815IZP
5994PVC
5812INP
5813AL
5808BU
5806BU
OC
AB2AAL
DESCRIPTION
1/16" x 1/2" Cotter Pin, stainless steel
Handle, steel & zinc plated
Rivet, stainless steel
Rivet, steel, zinc plated
Handle Washer, steel, zinc plated
Selector Shield, steel, zinc plated
Selector Shield Tip, celcon
Spacer, celcon
Main Stem, stainless steel
Screw, steel, zinc plated (8 required)
Cover Plate, aluminum
Gasket, buna-N
Packing, thermo-leather (5 required)
Packing Gland, stainless steel
Main Spring, stainless steel
Washer, stainless steel
Selector Cam, aluminum
Guide Nut, stainless steel
Valve Spring, stainless steel (3 req’d.)
Valve Stem, celcon (3 required)
Body, aluminum
Seat Plate, polyethylene (3 required)
Outer Adapters, aluminum ( required)
Spare Parts Kit (includes items with *)
DESCRIPTION
15" Hand Spray Gun
Orifice Insert Cap
Disc Adapter
Orifice Insert Gasket
Orifice Insert, stainless steel
Spring Pressure Plate
Coil Spring
Adjusting Spring
Spray Housing
Spring Collar
Spring Collar Gasket
Seat Plate
Guide Washer
Snap Ring
Adjusting Stem
Tubing
Inlet Body, Garden Hose Conn.
Packing (four required)
Packing Screw
Adjusting Sleeve
Hand Grip Washer
Hand Grip
Adjusting Sleeve Collar
Hand Grip Nut
Garden Hose Washer
Gasket for OC--Tip (not shown)
Off-Center Tip for 3/4" T (not shown)
Spare Parts Kit (includes items with *)
Please order replacement parts by PART NO. and DESCRIPTION.
(AA17I) TEE VALVE
PARTS BREAKDOWN
9
6
1 2
4
3
10
11
12
13 14 15
8
5 7
16
17
9
18
19
20
22
21
Please order replacement parts by PART NO. and DESCRIPTION.
(8460) BY-PASS VALVE
PARTS BREAKDOWN
9
10
8
7
4
8
5 6
11
3
1
14 13
18
2
15
17
(8460) BY-PASS VALVE PARTS LIST
REF.
NO.
16
12
1.
* 2.
* 3.
4.
* 5.
6.
7.
8.
9.
10.
* 11.
12.
* 13.
14.
15.
16.
17.
18.
PART NO.
8367AL
8373SS
8374SS
8371AL
8369NY
8368SS
8362AL
7688ICP
5898AL
5896ALSS
8366FA
8365 304SS
8364NY
8477SS
8389 304SS
8361 3/4NY
9017IZP
8400 1/4
AB8460 Repair
DESCRIPTION
Guide Sleeve, aluminum
Outside Spring, stainless steel
Inside Spring, stainless steel
Spring Retainer, aluminum
Washer, nylon
Adjusting Nut, stainless steel
Bonnet, aluminum
Screw, steel cadium plated (4 req'd.)
Lock Nut, aluminum
Adjusting Stem (sub. assembly)
Diaphragm, fairprene
Stop Spring, stainless steel, type 304
Back-up seat, nylon
Screw, stainless steel
Chamber Insert, ss, type 304
Body, nylon (for 8460 3/4)
Clamp Plate, steel, zinc plated
Pipe Plug, nylon
Kit (includes items with *)
Please order replacement parts by PART NO. and DESCRIPTION.
Page 31
SPRAYER CHECKLIST:
Downtime caused by field breakdowns is costly and time consuming. Many breakdowns can be
eliminated by periodic equipment maintenance. By spending time reviewing this checklist before
seasonal spraying application time and following proper after-season care, you can save time and
money later.
!
WARNING: To Prevent Serious Injury Or Death
•
Keep hands, feet, and loose clothing away from rotating parts.
•
Wear protective clothing recommended by your chemical and
fertilizer manufacturer when working with chemicals.
Check Before Going To The Field :
After Season Care:
1.
NOTE: It is important to wear proper safety equipment
when cleaning the sprayer. See your chemical or
fertilizer package for this information.
NOZZLES
Check tip for excessive wear by checking for grooves in
or near tip opening. Check nozzle spacing by starting at
center and working outwards. Check boom for proper
height.
2.
HOSES
Check all hoses for worn or soft spots. Be sure all hose
clamps are tightened and hoses are not kinked or pinched.
Check for leakage in any lines.
3.
TANK
Remove and clean agitator orifices. Check orifices for
excessive wear by checking for grooves in or near orifice
opening. Inspect fitting and grommets to insure they are
in good condition.
4.
5.
6.
7.
1.
After spraying chemicals, run water mixed with cleaners
through tank, pump and all hose hookups. If wettable
powder dries out in the system, it is very difficult to put
back into suspension and can cause malfunction, damage or injury.
2.
When cleaned, tank should have all openings closed or
covered to keep dirt from entering.
3.
Pump should be flushed with soluble oil and pump ports
plugged to keep out moisture and air.
4.
CONTROLS
Check for leakage, plugging, or wear on all valves,
fittings, etc. Clean off any build up of foreign material.
Disassemble tips and rinse with water or cleaning
solution. (Appropriate for chemical sprayed).
5.
Clean tip opening with a wooden toothpick. Never use
wire or hard object that could distort opening.
PUMP
Check to be sure pump turns freely.
6.
Dispose of all unused chemicals or solutions in a proper
and ecologically sound manner.
FRAME
Be sure all bolts are tightened.
6.
Water rinse and dry tips before storing.
REPLACEMENT PARTS
Replace all worn or damaged parts.
NOTE: DETHMERS MANUFACTURING COMPANY
does not and will not make any recommendations
concerning application of various chemicals or
solutions. These recommendations relate to either
amount or procedure of materials applied. If you
have any questions regarding application of certain
chemicals or solutions, contact your chemical
supplier and follow chemical manufacturer
recommendations.
DETHMERS MFG. COMPANY
P.O. BOX 189
4010 320th St., BOYDEN, IA. 51234
PH: (712) 725-2311 or (712) 725-2302
FAX: (712) 725-2380
TOLL FREE: 1-800-54DEMCO (1-800-543-3626)
www.demco-products.com
Page 32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement