Daewoo | LCD TV | Specifications | Daewoo LCD TV Specifications

LCD TELEVISION
DSL-26T3WCH
CONTENTS
Safety Precautions
Power Supply
1
Installation
2
Use and Maintenance
3
Important Safety Instructions
4~5
User Guidance Information
Names of each part(Front View) / Accessories
6
Names of each part(Back View)
7
Mounting on a Desktop / Installation Precautions
8
Installing an Antenna
9
Remote control
Precautions / How to use remote control
10~11
12
Connection
VCR Connections / Watching Video Tape
13
Satellite/Cable TV Set-Top Box Connections / Watching Cable TV
14
DVD Connections / Playing the DVD
15
PC Connections / How to use as PC
16
Audio Amplifier and Monitor Connections / Digital Amplifier Connenction
17
Basic Use
Powering the LCD TV / Selecting input source
18
Application
Operating the Menu
19
Customizing the PICTURE Settings
20
Customizing the SOUND Settings
21
Customizing the TIMER Settings
22
Customizing the SETUP Settings
23
Customizing the LOCK Settings
24
Customizing the CHANNEL Settings
26~27
DVD operation
28~33
Disc care
34
Maintenance and Service
Trouble shooting
35
Specifications
36
1
2
3
The product is an earthed appliance. A 3-core power cord and a 3-pin plug
must be used. The product must be connected to a mains socket outlet with a
protective earthing connection. The mains socket and plug should be readily
accessible at all times.
4
5
Please insert a 12cm disc
according to the instructions
next to the slot.
V
Remote control window(keep clear)
Led indicator
User’s Guide
Power Cable
Remote Control
6
13
14
USB
SD/MMC/MS
YPbPr IN
SWITCH
HDMI2
Video
HDMI1
R
AV OUT
L
AV2 IN
1
1
2
2
3
AC POWER IN
POWER switch
3
HDMI2
4
HDMI1
4
5
5
6
PC and AUDIO
7
Video
R
L
Video
R
L
Coax
AV1 IN
8
9
10
11
12
9
AV1 IN VIDEO and AUDIO(R/L)
10
S-VIDEO
6
YPbPr
11
Coax
7
AV2 IN VIDEO and AUDIO(R/L)
12
RF
13
USB (Opreate in DVD mode)
14
SD/MMC/MS (Opreate in DVD mode)
8
AV OUT VIDEO and AUDIO(R/L)
POWER ON/OFF jack
7
8
YPbPr IN
SWITCH
HDMI2
Video
HDMI1
R
AV2 IN
AV OUT
L
Video
R
L
Video
R
L
AV1 IN
Press TV/AV button on the remote control to diplay the input source menu, press
press button to confirm. Then you can receive the signal.
9
Coax
/
button to select TV, then
Buttons for Basic operating
TV-MENU
Press to diplsy the OSD menu.
TV/AV
Display the input source menu.
CH+/Channel/Program +/-.
VOL+/Volume +/-.
DTV
Switch to DTV source.
DVD-SETUP
Press to display the DVD menu.
EXIT
Press to exit the OSD menu.
DISPLAY
Press to display the current mode’s
information.
Press to display the disc’s
information in DVD mode.
OK
THUMBSTICK
Allows you to navigate the
on-screen menus and adjust the
system settings to your preference.
POWER
Turn the TV on/standby
Buttons for TELETEXT operating
You could use the functions of the
buttons only in TELETEXT.
TV/TXT
Turn off/on the Teletext display.
CANCEL
Cancel the Teletext display.
REVEAL
Reveal any hidden text.
HOLD
Hold or carry on the current
subpage.
SIZE
Press to see top half of page
double size, Press again
to see the bottom half of page
double size. Press again for
normal size.
SUBPAGE
Press to subpage, again to cancel.
INDEX
Go to index.
Colour buttons
Short cuts-follow the coloured
links in the text.
NUMBER BUTTONS
Choose channel directly.
Press number buttons and press
OK button to play the channel.
Number buttons for DVD.
Pressing “-/--”button to display
“SELECT 10+”, and press a
number button to play the program.
CHANNEL LIST
TV/RADIO
EPG
ASPECT
10
Return to the previous channel
viewed.
PICTURE
Press repeatedly to cycle
through the available video
picture modes.
SOUND
Press to cycle through the
different sound settings.
NICAM/A2
Nicam/A2 select.
MUTE
Press to mute the sound.
Press again or press VOL+ to
unmute.
SLEEP
Shutdown timer.
INFO
Means information, to display
brief information concerning
the current channel you are
viewing.
SUBTITLE
To switch the dialog at the
bottom of the screen.
CHANNEL LIST
Display the programs list.
EPG
To show the Electronic Program
Guide during no-menu state only.
TV/RADIO
Disc menu change between
TV and Radio
FAV
Display the favorite program list.
ASPECT
Press to change the display
mode of the screen: 4:3 , 16:9.etc.
Buttons for DVD operating
You could use the functions of the
buttons only in DVD mode.
: Load/eject DVD disc.
: DVD previous chapter.
: DVD fast reverse
: DVD fast forward.
: DVD next chapter.
: Play/pause DVD program.
: Stop DVD program.
LANGUAGE
Select DVD disc language.
ZOOM
Adjust picture size in DVD mode.
SUBTITLE
Select DVD disc subtitle.
MENU (PBC)
DVD play list/Disc menu
ANGLE
Select DVD picture angle.
TITLE
DVD title.
GOTO
Play your favorite title/chapter/track.
PROGRAM
Edit the program and play.
SLOW
Play DVD programs at slow speed.
REPEAT
Repeat playing the title or chapter.
A-B
Select and play the preferable
paragraph of DVD program by
pressing this key twice at the
beginning and end of it.
CHANNEL LIST
TV/RADIO
EPG
ASPECT
12
YPbPr IN
SWITCH
HDMI2
HDMI1
Video
AV OUT
R
L
YPbPr IN
HDMI2
HDMI1
Video
R
R
L
Video
R
L
Coax
AV1 IN
AV2 IN
SWITCH
Video
AV OUT
L
AV2 IN
Video
R
L
Video
R
L
Coax
AV1 IN
, press OK button to comfirm.
13
YPbPr IN
SWITCH
HDMI2
HDMI1
Video
AV OUT
R
L
YPbPr IN
SWITCH
HDMI2
HDMI1
R
L
HDMI1
Video
Video
R
L
Coax
Video
R
L
Video
R
L
Coax
AV1 IN
YPbPr IN
HDMI2
L
AV OUT
AV2 IN
SWITCH
R
AV1 IN
AV2 IN
Video
Video
AV OUT
R
L
AV2 IN
Video
R
L
Video
R
L
Coax
AV1 IN
, press OK button to comfirm.
14
YPbPr IN
SWITCH
HDMI2
HDMI1
Video
AV OUT
R
L
YPbPr IN
HDMI2
HDMI1
Video
R
L
HDMI1
Video
L
Coax
Y Pb Pr
Video
R
L
Video
R
L
Coax
Y Pb Pr
AV1 IN
YPbPr IN
HDMI2
L
R
AV OUT
AV2 IN
SWITCH
R
Video
AV1 IN
AV2 IN
SWITCH
Video
AV OUT
R
L
AV2 IN
Video
R
L
Video
R
L
Coax
AV1 IN
, press OK button to comfirm.
15
Y Pb Pr
YPbPr IN
SWITCH
HDMI2
HDMI1
Video
R
AV OUT
L
AV2 IN
Video
R
L
Video
R
L
Coax
AV1 IN
, press OK button to comfirm.
16
Connection
Audio Amplifier and Monitor Connections
Connecting to the Audio Amplifier and Monitor
<Monitor>
Video Cable
YPbPr IN
HDMI2
SWITCH
Video
HDMI1
R
AV OUT
L
Video
R
L
Video
R
L
AV2 IN
Coax
AV1 IN
Digital Amplifier Connections
Connecting to the Digital Amplifier
<Digital Amplifier>
SPDIF Cable
YPbPr IN
SWITCH
HDMI2
HDMI1
Video
R
AV2 IN
17
AV OUT
L
Video
R
L
Video
R
L
AV1 IN
Coax
TV
Component
DVD
VGA
HDMI1
HDMI2
AV1
AV2
S-Video
18
MENU
and
Use the
buttons to select your main menu option.
Allows you to customize the aound options and effects.
SOUND
PICTURE
Picture Mode
SoundMode
Standard
Standard
Treble
50
Contrast
50
Bass
Brightness
50
Balance
Colour
50
AutoVolume
On
Sharpness
50
SurroundSound
Off
Hue
50
50
0
TIMER MENU:
OPTION MENU:
Allows you to setup a variety of timer options.
Allows you to setup a variety of setup options.
OPTION
TIME
English
Language
Clock
English
Off
Audio Language
On Time
Off
Subtilte Language
English
Sleep Timer
Off
Country
Australia
On
Restore Factory Default
Off Time
Auto Sleep
Western Australia GMT+8
TimeZone
LOCK MENU:
CHANNEL MENU:
Allows you to set up a variety of lock options.
Allows you to search channels and set up a variety of channel options.
LOCK
CHANNEL
Auto Tuning
Lock System
Off
DTV Manual Tuning
Set Password
ATV Manual Tuning
Block Program
DTV Paren tal Guidance
Hotel Lock
Programme Edit
On Block
EXIT
PICTURE
Picture Mode
Medium
Contrast
50
Red
50
Brightness
50
Green
50
Colour
50
Blue
Sharpness
50
Aspect Ratio
Hue
Use the
menu.
PICTURE
Color Temperature
Standard
and
Noise Reduction
0
buttons to select the PICTURE menu(as the picture above), press
50
16:9
On
button to enter the
Picture Mode
Cycles among picture display modes: Standard, Dynamic, Mild, User.
Contrast
Controls the difference between the brightest and darkest regions of the picture.
Brightness
Controls the overall brightness of the picture
Colour
Control the colour.
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Hue
Controls the Hue.
Color Temperature
Cycles among colour modes: User,Warm, Medium, User.
When you select “User” mode, you could adjust the colours below(Red, Green,
Blue) by yourself.
Aspect Ratio
Cycles among screen display modes: Auto, 4:3, 16:9, Zoom1, Zoom2.
Noise Reduction
Reduce the noise point of the picture when you turn on the function by selecting
“On”.
Screen(only exist in PC-RGB mode)
Press
button to enter the submenu to adjust the picture of the screen.
PICTURE
Auto Adjust
Horizontal Pos.
50
Vertical Pos.
50
Clock
50
Phase
50
20
SOUND
SoundMode
Standard
Treble
50
Bass
50
Balance
Use the
menu.
50
AutoVolume
On
SurroundSound
Off
and
buttons to select the SOUND menu(as the picture above), press
Sound Mode
button to enter the
Allows you to select among: Standard, Music, Movie, Sports and User.
Treble(Could be adjusted when the sound mode is User)
Controls the relative intensity of higher pitched sounds.
Bass(Could be adjusted when the sound mode is User)
Controls the relative intensity of lower pitched sounds.
Balance
To adjust the balance of the left and right sound track, or turn off the volume of the
left and right sound track.
Auto Volume
Control the volume of the program automatically when you turn on the function by
selecting “On”.
Surround Sound
Turn on/off the surround sound function by selecting “surround”/“off”.
21
Application
Customizing the TIMER Settings
TIME
Clock
Off Time
Off
On Time
Off
Sleep Timer
Off
Auto Sleep
TimeZone
Use the
menu.
and
On
Western Australia GMT+8
buttons to select the TIMER menu(as the picture above), press
button to enter the
The TIMER menu includes the following options :
Clock
Use the and buttons to select the position, and use the
and button to set the time.
Note: User can not change time manually during DTV mode, for time is from signal source
directly.
Off Time
Press
button to enter the submenu, you could set the time when the TV set will be turned
off automatically, you could also set the frequency.
On Time
Press
button to enter the submenu, you could set the time when the TV set will be turned
on automatically, you could also set the frequency, volume and program.
Sleep Timer
Allows you to setup the sleep timer among: 10min,20min, 30min, 60min, 90min, 120min
180min, 240min and off.
Auto Sleep
Turn on/off the auto sleep function.
TimeZone
Allows you to select the time zone.
22
Application
Customizing the SETUP Settings
OPTION
Language
English
Audio Language
English
English
Subtilte Language
Australia
Country
Restore Factory Default
Use the
menu.
and
buttons to select the OPTION menu(as the picture above), press
The SETUP menu includes the following options:
Language
Allows you to select menu language.
Audio Language (Could be selected in TV mode)
Allows you to select audio language.
Subtitle Language (Could be selected in TV mode)
Allows you to select subtitle language.
Country
Display the current Country.
Restore Factory Default
Press
button to restore factory default.
23
button to enter the
Application
Customizing the LOCK Settings
LOCK
Lock System
Off
Set Password
Block Program
DTV Parental Guidance
Hotel Lock
On Block
Use the
and
buttons to select the LOCK menu(as the picture above), press
menu.
Note: You should enter the code to operate the menu.(original code is 0000)
button to enter the
Please enter password
The LOCK menu includes the following options :
Lock System
When turn on, the user can not manual search and program edit.
Set Password
Press
Block Program
Press
button to enter the submenu as the right
picture, select a program, and press GREEN button
to block it.
DTV Parental Guidanc
button to enter the submenu, and you could change the password here.
Cycles among ages: 4,5,6......18, or you could turn the function off.
24
Application
Customizing the LOCK Settings
HOTEL LOCK
HOTEL LOCK
HOTEL LOCK
Off
SOURCE LOCK
CHANNEL LOCK
Off
MAX VOLUME
KEY LOCK
100
Off
HOTEL LOCK: Press
and
SOURCE LOCK: Press
to select Hotel Lock and press
and
to select the ON or OFF.
to select Hotel Lock and press
to select the source for the initial input source,
Note: The current using channels can not be locked.
DTV
Off
TV
Off
Component
Off
DVD
Off
VGA
Off
HDMI1
Off
HDMI2
AV1
AV2
S-Video
Off
Off
Off
Off
CHANNEL LOCK: If current SOURCE LOCK is TV, press and
select CHANNEL LOCK and then use
to
select the ON or OFF. When choosing on, in channel menu, user can not operate the singal channel reveiving,
channel editing and so on.
MAX VOLUME: Press
KEY LOCK: Press
and
and
select MAX VOLUME and then use
select KEY LOCK and then use
25
to select the max volume of the sound.
to lock the buttons on the TV set.
Application
Customizing the CHANNEL Settings
CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Use the
menu.
and
buttons to select the CHANNEL menu(as the picture above), press
button to enter the
The CHANNEL menu includes the following options :
Auto Tuning
Press
DTV Manual Tuning
Press
button to enter the submenu.
Press
or
button to select a channel
and press OK button to start search.
ATV Manual Tuning
Press
Storage To
Current CH
Search
Fine-Tune
Skip
Frequency
button to start auto tuning(It contains ATV and DTV signals).
button to enter the submenu.
Select a position to store the program.
Select a program you want to tuning.
Press and buttons to manual search.
Press and buttons to fine-tune.
Select “Yes” to skip the program when you
scan the programs by CH+/Display the current channel’s frequency.
Press RED button to save all the setups you have changed.
26
Application
Customizing the CHANNEL Settings
Program Edit: Press
button to enter the submenu as the following picture.
Delete: Select a program, and press RED button, on the right of program, “Delete” will appear, then press RED
button again, the program will be deleted. If you press “RED button once,but do not want to delete the
program, press “menu” to quit.
Rename: Select a program, and press GREEN button, then you could use and buttons to select the
position of the program’s name you want to change, and press and buttons to change the
character, press
or
button to confirm the change. Press menu to exit and it will automatically
save the current set.(It can only rename ATV program.)
Move: Select a program, and press YELLOW button, then you could use
and
buttons to change the
position of the program, press YELLOW again to confirm the change. Press menu to exit and it will
automatically save the current set.
Skip: Slect a program, and press BLUE button to sign the program, while the program have been signed,
it will be skiped when you scan programs by CH+/-.
FAV: Select a program, press FAV button to set the program as the favorite channel.
Note: The function of “RENAME” and “MOVE” could not be used in DTV source.
DVD Operation
Press the Power button on the TV or the remote control, then press the TV/AV button to select DVD mode.
If there is no disc in the DVD player the screen will show "NO DISC".
Place a disc
Insert Disc according to picture next to disc slot.
Do not touch the playing surface.
Hold the disc around the outside with your fingers and place the disc into the slot. The player will
automatically draw the disc into the player.
To "Eject" the disc, press the " " button on the TV or on the remote control.
Play
The contents of each disc vary, as to how the disc was authored and what features are included. Some
discs start playing as soon as they have been read, some need "Play" selecting in the Menu. Different play
modes are offered, such as Menu Play, Sequence Play and other modes.
Menu Play
1. Compatible with DVD, SVCD or VCD2.0.
2. lf the disc is a DVD, ROOT MENU will appear on the screen. If it is SVCD or VCD 2.0, please press the
Menu button to see the menu.
3. When a DVD disc is loaded, press the Arrows buttons to highlight the menu item you want to choose.
With SVCD or VCD 2.0, press the numeric buttons to select a track to play.
4. Press ENTER or Play to start when highlighted.
5. Return to Menu when Playing: When playing a DVD disc press the Menu button to return to the "ROOT"
menu. When playing a SVCD or VCD, and PBC is "on" press the Menu or Return button to return to the
disc menu.
Title Play
1. Compatible with DVD discs only.
2. During DVD playback, press Title button to display the DVD title content.
3. Press the Arrow buttons to highlight the title you want to choose, and press Enter; also you can press
numeric buttons to choose.
4. The DVD player begins with the chapter 1 of the chosen title.
Sequence Play
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. When a SVCD or VCD disc is loaded and PCB is "on", press the MENU button once switches the PBC
"off". The player can now playback in sequence mode. To turn the PBC back on press the MENU button
again.
3. Except for SVCD or VCD discs, when in stop state, press the Play button, the player will play in the
"Sequence" mode. This is for all compatible discs.
Program Play
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. The Program Playback option allows you to enter the order in which you want chapters or tracks to play,
maximum to 16.
3. Program Menu: If PBC is on, this operation will turn PBC off while the chapters / tracks play in
programmed order.
4. According to the highlight, use the Numeric buttons to enter the chapters / tracks in the order you want
them to play. Then press Play or use Arrow buttons to highlight the "PLAY" item and press Enter. The
chapters /tracks will play in the programmed order. You can program maximum 16 titles / chapters / tracks.
28
DVD Operation
5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you
want to enter.
6. During Program Playback, if program button is repressed, the program order and the contents will be
displayed on the screen, and the Program Playback will be stopped; also you can press Stop and
Play to resume normal playback.
7. Notes:
To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press Enter.
To modify the program order, use Arrow buttons to highlight the item you are changing and enter the
new chapter / track you want to program directly.
8. The program indicator in the screen and the playing chapter / track illuminate.
Additional operation
Selecting Tracks
1 . Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. When playing a DVD disc, press Numeric buttons on the menu or title page to select tracks; During
DVD playback, you can input desired title numbers directly.
3. During sequence playback of a SVCD or VCD disk, press the numeric buttons to select tracks. (During
Program Playback and when the PBC is on, you can only press Prev / Next button to select)
4. As for CD, HD-CD, discs, press Numeric buttons directly to select tracks.
5. When playing WMA, Digital Audio disc/JPEG discs, press Numeric buttons to select different tracks on
current track list.
Skipping Tracks
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. To skip forward to the beginning of the next title / chapter / track on a disc, press Next on the remote or
the right side of the player.
3. To skip backward to the beginning of the preceding title / chapter/track on a disc, press Prev on the
remote or the right side of the player.
Multispeed Fast/Slow Motion Play
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. Press the Multispeed Fast/Slow button on the remote during play to search through a disc. Multispeed
Fast/Slow has four speeds: x2, x4, x8, x20.
With each consecutive press of the button, the search speed increases. If you press the button five times,
Fast Multispeed Fast/Slow cycles back to normal play.
3. During DVD play, when Multispeed Fast/Slow gets to the beginning of the next title / chapter, it resumes
normal play; During SVCD or VCD play with PBC on, when Fast Forward Play gets to the beginning of
the next track, it resumes normal play.
Multiphase Slow Motion Play
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc/JPEG discs.
2. Multiphase Slow has six speeds: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 of the normal Speed play when pressing the
"Slow" button consecutively when playing discs.
3. When you press Play or the "Slow" button 7 times the player returns to normal play.
Freeze Frame
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc/JPEG discs.
2. During CD, HD-CD, WMA or Digital Audio disc / JPEG playback, press Pause once to freeze playback;
Press Play button to resume normal playback.
Using the Repeat Feature
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
29
DVD Operation
2. While a disc is playing, press Repeat button once and the repeat banner appears to show current
repeat mode.
a) In SVCD, VCD, CD, HD-CD, WMA or Digital Audio disc/JPEG sequence playback mode. Press
Repeat button again to turn on repeat mode. Press the button again on the remote to turn to the next
repeat mode. There are three repeat options: Off, Track Repeat and Disc Repeat. With each
consecutive press of the button, the repeat mode switches. If you press the button four times, repeat
mode cycles back to Off.
b) In DVD playback, press Repeat button again to turn on repeat mode. There are three repeat options:
Off, Chapter Repeat and Title Repeat. With each consecutive press of the button, the repeat mode
switches. If you press the button four times, repeat mode cycles back to Off.
c) In WMA, Digital Audio disc /JPEG playback, press Repeat button again to turn on repeat mode.
There are four repeat options: Off, Track Repeat, Directory Repeat, and Disc Repeat. With each
consecutive press of the button, the repeat mode switches. If you press the button five times, repeat
mode cycles back to Off.
Using the Display Feature
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc discs.
2. Loading and playing DVDs (two pages)
- Press DISPLAY button once to show the first page:
- "Disc Type, Title * / * (the playing title / total titles), Chapter * / * (the playing chapter / total chapters),
Elapsed Time of the Disc".
- Press the button again to show the second page:
- "Language */* (the serial number of playing language / the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle /the amount of optional
subtitles) or Off, Angle * / * (the serial number of playing angle / the amount of optional angles) or Off".
- Press the button for the third time, the display menu fades out.
3. Loading and playing SVCD discs (two pages)
- Press Display button once to show the first page:
- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".
- Press the button again to show the second page:
- "Language * / * (the serial number of playing language/ the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle / the amount of optional
subtitles) or Off".
- Press the button for the third time, the display menu fades out.
4. Loading and playing VCD
- Press Display button once to show the first page:
- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".
- Press the button again, the display menu fades out.
5. Loading and playing CD, HD-CD, WMA, Digital Audio / JPEG discs
- Press Display button once to show the first page:
- "Disc Type, Track * / * (the playing track / total tracks), Mute, Repeat Mode, Elapsed Time of the
Playing Track".
- Press the button again, the display menu fades out.
Using the Search Feature
1. Compatible with DVD, SVCD, VCD, CD, HD-CD discs.
2. You can use Search feature to select a title/ chapter/track number or go to a specific point in a title.
First, press GOTO button on the remote controller to bring up the search menu and enter the edit state.
Secondly, press Arrow buttons to highlight the title / chapter/ track number or the time option; Thirdly,
use Numeric buttons to enter the title / chapter/ track you want to play or the elapsed time you want to
go to in that title. At last, press ENTER button to start playback.
For example, entering 01:23:56 will start playback one hour, twenty-three minutes and fifty-six seconds
into the title.
30
3. Notes
a) This feature does not work in Program Play mode.
b) If PBC is on, it will turn off automatically when Search Playback starts.
c) When playing WMA, MP3 / JPEG discs, Search Feature does not work.
Changing the Soundtrack or Language
1. Compatible with DVD SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. Press the LANGUAGE button to display current soundtrack.
a) Press the button to switch soundtracks.
b) Press the button again on the remote to turn to next soundtrack.
3. When playing a SVCD or VCD disc, there are five soundtracks: Stereo (L/R), L/L, R/R, L/L Auto A/D
Detect, and R/R Auto A/D Detect. With each consecutive press of the button, the soundtrack switches.
If you press the button six times, soundtrack cycles back to Stereo.
4. When playing a CD, HD-CD, WMA, Digital Audio disc, there are three: Stereo (L/R), L/L, and R/R.
5. When playing a DVD or SVCD disc, press LANGUAGE button to display current language, press the
button again to turn to next language if the disc has different languages.
Subtitles
1. Compatible with DVD, SVCD discs.
2. Press the Subtitle button on the remote once, and the subtitle info banner appears
3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles
on-screen. By default, subtitles are off. The info banner will display Subtitle Off.
4. To display subtitles, press the Subtitle button again. The default language with its responding serial
number will be displayed in the info banner and subtitles will be displayed in that language. There are
8 supported subtitles: Chinese, English, Japanese, French, Spanish, Portuguese, Germany and Latin.
With each consecutive press of the Subtitle button, the subtitle switches.
For example, "Language Icon: [1 English
2CH] or [Off]" (the availability of the subtitles are
disc-dependent). To turn subtitles off, press the Subtitle button until Subtitle Off is displayed.
Mute the Audio Output
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. Pressing the Mute button allows you to reduce sound to an inaudible level, and the icon of "MUTE"
will be displayed on screen. Press the button again or press the Vol +/- button to return to the normal
condition.
3. If the player has no sound, check that the "Mute" is not on.
Zoom In the Video Image
1. Compatible with DVD, SVCD, VCD, JPEG discs.
2. The Zoom Function allows you to enlarge the video image.
3. Press Zoom repeatedly to activate the function and choose the required zoom factor: Zoom 2,
Zoom 3, Zoom 4, Zoom 1 /2, Zoom 1 /3, Zoom 1/4, Zoom Off.
Repeat a Specific Segment on the Disc that You Define
1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc.
2. During normal or fast playback, press the A-B button once. REPEAT "A" appears on the screen. This
indicates the start point of the loop.
3. Press A-B again, REPEAT A-B will be shown, this indicates the end point of the loop.
4. The segment will now be repeated until you press the "REPEAT" button again to turn off the feature.
5. Press A-B again to cancel the loop points.
6. When playing a SVCD, VCD, or CD disc, you can repeat a specific segment only in one track. When
the next track begins, A-B Repeat turns off automatically.
7. When playing a DVD disc, you can repeat a specific segment only in one title.
Digital Audio Disc
1. Compatible with Digital Audio discs
2. The player will search the disc directory automatically and display the contents on screen.
31
DVD Operation
3. The player will then start to play the first track, of the selected directory.
4. To change directories use the direction buttons.
DVD System Operation
System operation will define the setting of the set; these definitions will be stored until you change them
again.
General Steps of Setup Menu
1. Pause or Stop the player. Press DVD SETUP on the remote control. The main menu will be shown as
below.
2. Press the / buttons to select the Icon of the desired section, e.g. “TV System" and press
button to open that section.
button to open that section.
3. Press / to select the desired feature and again press
4. Press / to select the desired feature and then press "OK" to select the new setting.
to select EXIT SETUP and then press "OK"
5 To exit the menu, press "DVD SETUP " or
When launching the setup routine, the pressing of the following buttons will turn off the setup menu,
while the choices that have been changed will be saved.
Menu specification
1. SYSTEM SETUP
The system setup options are illustrated below:
SOURCE
Select the source of the information you want to play: AUTO, DISC, CARD, USB
In DVD mode, insert USB/CARD, it will auto display.
1.USB/CARD format: JPEG ǃ MP3ǃ WMA ǃMPEG2 ǃDVD VIDEO ǃMPEG4 ǃ AVI ǃDIVX(3.XX5.XX) ǃXVID˗
2.DVD/CD playback formats:CDǃ CD-Rǃ CD-RWǃ VCD ǃSVCDǃ DVD DVD+/-Rǃ DVD+/-RW˗
3.DVD & USB & Card formats: DIVX ˖3.XX-5.XX˗
4.Cards compatible: SD/MS/MMC.
TV SYSTEM
According to the Color system of your TV, select proper TV TYPE.
PASSWORD
The password option is initialized as locked. You cannot set the ratings limit or change the password.
To enable these features you must unlock the Password. The default password is "0000". Using the /
button, move the highlight to "PASSWORD", press the
button and enter "0000". You will see the
padlock symbol open. You may now change the RATING or put in a new password number.
button to enter the lock field, the lock symbol will change
If the Lock symbol is BLUE you must press the
to YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password
and keep safe.
32
DVD Operation
RATING
The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the
family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.
2. LANGUAGE SETUP
The language setup options are illustrated below:
- OSD LANGUAGE: The OSD will display in the language you choose.
- AUDIO LANG: If the disc you are playing has the language you choose, it will
output audio in that language.
- SUBTITLE LANG: If the disc you are playing has the language you require you may select this either in
the Menu or using the "SUBTITLE" button on the Remote control. You may also switch this OFF.
- MENU LANG: If the disc you are playing has the language you require you may
select this.
3. AUDIO SETUP
-TONE: Use the
/ button to move the scroll and adjust the tone.
4. DIGITAL SETUP
The video setup options are illustrated below:
- DYNAMIC RANGE: Use the / button to
move the scroll and adjust the dynamic range.
- DUAL MONO: Choose the mode of the audio output.
- There are four modes: STEREO, MONO L, MONO R,
MIX MONO.
33
Disc Care
Disc Care
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, "title".
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one
or more chapters and each of them is numbered for easy searching, but some discs may not have a
recording chapter.
Track
A segment of picture or music on a CD, Each track is numbered for searching.
Care of Disc
Video disc contains high-density compressed data that needs proper handling.
1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.
2. Do not bend or press the disc.
3. Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.
Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from center
toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will
permanently damage the disc surface.
34
Maintenance and Service
Trouble shooting
Do not use other functions that are not mentioned in this user’s manual.
In case a problem occurs with your LCD TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
Problem
Action
The screen does not appear.
Is the power plug pulled out? Insert the power plug.
Press the power button of the remote control.
The screen appears too
slowly after the power is turned on.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come after 1 minute contact your dealer or an authorized service
center.
Screen is too bright or too dark.
Perform brightness adjustment or Contrast adjustment.
Screen is too large or too small.
Adjust the screen size.
Stripes appear on the screen
and it shakes.
Stop using wireless telephones, hair driers and electric drills.
The screen does not move.
Screen appears, Voice is not heard
Press the PAUSE button. Check if the Pause button is pressed on
external equipment.
1. Press the "MUTE"button.
2. Increase the sound level by pressing volume adjustment button.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or
an authorized service center.
Remote control does not work
1. Check if main power is On.
2. Check that the batteries of the remote controller were loaded
properly.
3. Check to see if any obstacle exists between the LCD TV and
the remote control , then remove it, if any.
4. If the batteries have no power, replace them with two new
batteries.
This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.
35
Maintenance and Service
Specifications
LCD Panel
Panel Size
26” TFT LCD
Ratio
16:9
Max. Resolution
Input Connector
Output Connector
1366 x 768
VIDEO
2
S-VIDEO
1
YPbPr
1
AUDIO (L/R)
2
PC/AUDIO(L/R)
1
HDMI
2
RF
1
VIDEO
1
AUDIO L/R
1
COAX
1
Power Source
AC 100-240V 50/60Hz
Power Consumption
160W
The cabinet design and electronics specifications will be modified without prior notice for
improving the performance.
36
Download PDF