- No category
Highbay Fluorescent - Eight Lamp Curved Profile Tandem Lamp Design HFC7 Series
Add to my manuals
4 Pages
advertisement
Specification Sheet HFC7 Series
4/11/2013
Highbay Fluorescent - Eight Lamp
Curved Profile Tandem Lamp Design
Project:
Catalog#:
Approved by:
Description
HFC7 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID highbay fixtures. This fixture operates eight lamps and as a standard feature comes equipped with
Howard ballasts.
Applications
Warehouse
Manufacturing
Facility
Gymnasium
Cafeteria
Auditorium
Features
• Easy access to wiring compartment & ballast
• Access plate provides access to electrical wiring with-out the need to open the fixture
• Knock-outs for easy electrical wiring and assembly
• Factory Installed Occupancy Sensor option
• Factory Installed Emergency ballast option
• Factory Installed Wrap Lens option
• Lamp Installation option available
• Multiple power cord set options, (voltage, length, gage)
• Choice of 86% Standard Specular Aluminum Reflector,
95% Specular Enhanced Aluminum Reflector or 91% White
Reflector
• Heavy Duty pre-painted steel construction
• Wireguard available (not factory installed)
• Custom configurations available
• Suspended mount insures a quick painless install
• Chain and V-Clip Hanging option
• Wire cable hanging option.
• UL Listed for Damp Locations
Curved design for better light distribution
Benefits
• Energy Saving Compared to HID systems
• Exceptional Color Rendering
• High System Efficacy
• Long Lamp Life
• Instant On/Re-strike Capability
• Howard Ballast and Howard Lamp as a system is covered by Howard Industries
Warranty
• Quality Lamp holders
• Computer Designed Reflectors
• System Tested, Designed, Approved, and
Manufactured by Howard Industries in
Mendenhall Mississippi.
• Compliant with Safety and performance standards.
Rigid heavy-gauge prepainted steel body
96.0”
Contractor friendly one screw access to electrical connections through this access plate.
Removable from outside.
Wire cable hanging mounting option (WCH)
13.0”
Chain and V clip mounting option (CV)
Four 1/2” knockouts for easy wiring access.
2 on top and one on each end provides clean mounting for occupancy sensor.
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
HFC7 Series
4/11/2013
Highbay Fluorescent - Eight Lamp
Curved Profile Tandem Lamp Design
Project:
Catalog#:
Approved by:
Ordering Information
Model
Family
Reflector No. of
Lamps
Lamp
Type/
Wattage (1)
HFC7 E
HFC7 E: Enhanced
Specular
Aluminum (95%)
A: Specular
Aluminum (86%)
8
8
W: White reflective (91%)
CRI/CCT Ballast Input Volts Factory Installed
Options
Cordset Options T
B
A
Pack.
32
T8 Lamps
28: F28T8
32: F32T8
T5 Lamps
28:F28T5
54: F54T5HO
CRI CCT
A
High
Lumen T8 T5
A: No Lamps
F:
G:
H:
I:
B:
C:
D:
E:
J:
K:
L:
M:
N:
85
85
85
85
75
75
75
75
85
85
85
85
85
3000
3500
4100
5000
3000
3500
4100
5000
6500
3000
3500
4100
5000
Yes
Yes
Yes
Yes
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SE
SE: SBF High Eff (2)
HE: HBF High Eff (2)
LE: LBF High Eff (2)
PS: PRS T5
P8: PRS T8 (2)
MV
MV: 120-277v
HV: 347-480v (T5HO)
AX: 480-277 (3)
000
000: No FIOs
A: Occ Sensor (4)
B: Emergency Ballast
D: Wrap Lens (6)
I: Special Wiring
Instructions
T: Toggle switch bilevel lighting control
(5)
(7)
00
00: Standard Disconnect
01: 6’ SJT 18/3, no plug
02: 10’ SJT 18/3, no plug
03: 6’ SJT 18/3 L5-15, twist lock 120v
04: 10’ SJT 18/3 L5-15twist lock 120v
05: 6’ SJT 18/3 5-15non twist lock 120v
06: 10’ SJT 18/3 5-15non twist lock 120v
07: 6’ SJT 18/3 L7-15 twist lock 277v
08: 10’ SJT 18/3 L7-15 twist lock 277v
09: 6’ SJT 7-15 non twist lock 277v
10: 10’ SJT 7-15 non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’ SJT 18/3 7-15, non twist lock 277v
17: 18/3, no plug spec len
18: 6’ STW L8-20, twist lock 480v
19: 10’ STW L8-20, twist lock 480v
20: 16’ SJT 18/3 L5-15, twist lock 120v
21: 16’ SJT 18/3 L5-15, twist lock 277v
0 I
I: Single
B: Bulk
(1) Lamp installation available.
(2) High Efficiency ballasts are CEE Listed.
(3) Step-down autotransformer. Allows use of standard MV T8 ballasts to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
SE Standard Ballast Factor High Efficiency Instant Start T8 Ballast
HE High Ballast Factor High Efficiency Instant Start T8 Ballast
LE Low Ballast Factor High Efficiency Instant Start T8 Ballast
PS Program Rapid Start T5 Ballast
P8 Program Rapid Start High Efficiency T8 Ballast
Specifications subject to change without notice.
Sample Ordering Number:
HFC7 E 8 32 A SE MV 000 00 I
HFC7 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
8-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
Standard Luminaire Disconnect (no cordset)
Single Packaging
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
4/11/2013
Field Installed Options Ordering
HFC7 Series
Project:
Catalog#:
Approved by:
HFC7-WG
Wire Guard
(2pcs)
HFA-WCH
Wire Cable Hanging Kit
(2 pcs per kit)
HF-2CV (2 foot)
HF-3CV (3 foot)
Hanging Chain & V-clips
HF-SK1
Stabilizer Kit
(Hub, color and wire cable)
HFC7-WL
Wrap Lens
(2pcs)
Energy Cost Estimator
Existing System
400W MH Highbay
New System
HFC7E832APS
Prog. Start High Eff
Fluorescent Highbay
Hours burned per year
4368
Number of Fixtures
Cost per kWh$
0.12
Energy Cost
Estimation
Watts per
Fixture
(existing system)
Energy used
(existing system)
1
458
$240
Number of
Fixtures
Watts per
Fixture
(new system)
Energy used per
1
216
$113
$127.00
$250
$200
$150
$100
$50
$0
53% Annual Savings
$240
Existing System
$113
New System
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Specification Sheet
4/11/2013
HFC7 Series
Photometric Data - 8 Lamp T8 (HFC7E832)
Candela Polar Plot
Project:
Catalog#:
Approved by:
Luminaire Efficiencies*
Reflector Type T8 T5
Enhanced Specular 90% 93%
Specular 84% 88%
White 85% 88%
*Luminaire efficiency is the ratio of light output emitted by the luminaire to the light output emitted by its lamps.
Zonal Lumen Summary
Zone
0-30
0-40
0-60
0-90
0-180
Lumens
4776.0
7827.0
13310.0
16508.0
16508.0
%Lamp
24.0
39.0
67.0
83.0
83.0
%Fix
29.0
47.0
81.0
100.0
100.0
HFC7E832
Test Report: HBT8-648~BAL11678.ies
Maximum Candela = 6362
Located at Horizontal Angle = 90, Vertical Angle = 10
#1 = Vertical Plane Through Horizontal Angles (90-270) Through Max Cd.
#2 = Vertical Plane Through Horizontal Angles (45-225)
#3 = Horizontal Cone Through Vertical Angle (10) (Through Max. Cd.)
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 0.20
RC
RW 70
0
1
2
3
4
5
6
7
8
9
98
90
82
75
69
63
59
54
51
47
50
98
86
76
67
59
53
48
43
40
36
80
30
98
83
70
60
52
46
41
36
33
30
10
98
80
66
55
47
40
35
31
28
25
70
96
88
80
73
67
62
57
53
49
46
50
96
85
74
65
58
52
47
43
39
36
10 44 34 29 23 43 33
Specifications subject to change without notice.
70
30
96
81
69
59
51
45
40
36
32
29
27
10
96
79
65
54
46
40
35
31
28
25
23
50
92
81
71
63
56
50
49
41
38
35
32
50
30
92
79
67
58
50
44
39
35
32
29
27
10
92
76
63
53
46
40
35
31
28
25
23
50
88
78
68
61
54
49
44
40
37
34
32
30
30
88
76
65
56
49
39
39
35
31
29
26
10
88
74
62
52
45
34
34
31
27
25
23
59
50
43
37
10
30
84
71
33
29
26
23
21
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
50
43
37
33
50
84
71
59
29
26
23
21
50
43
37
33
10
84
71
59
29
26
23
21
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement