Mitsubishi Electric | MSZ-FB25VA | Deluxe MSZ FB VA Series - Electrical ,Heat Pumps & Ventilation

Air Conditioning
Heat Pumps
Deluxe Inverter Wall Mounted MSZ-FB Series
· Quietest Heat Pump in NZ*
· Plasma Duo Filter System
· Energy Saving "i-see Temperature Sensor"
· Self Cleaning "Ozone Shower"
· Optional 7 Day Timer
You want to feel the
warmth, not hear it.
*MSZ-FB25VA at Low Fan Speed and Maximum Output,
as at 1st September 2008 in the 2.5 and 3.5kW Cooling Range.
DELUXE WALL-MOUNTED
MSZ-FB Series
Advanced Energy Saving
"i-see Temperature Sensor"
Plasma Duo Filter System
The new advanced energy saving
"i-see Sensor" searches out
temperature differences and directs
heat where you really need it.
Introducing the state-of-the-art range of Mitsubishi Electric
Deluxe Inverter Heat Pumps featuring the "i-see Sensor". This
advanced sensing technology reduces energy consumption by
maintaining air temperature and controlling air movement to
prevent excessive heating and cooling as well as unnecessary
operation. This range is also specifically designed to combat
and reduce common household allergens and unpleasant
odours, providing the optimal air quality that is vital for asthma
and allergy sufferers.
Dimensions (W x D x H): 798 x 257 x 295mm
MSZ-FB25VA
(MSZ-FB25VA + MUZ-FB25VA)
Cooling Capacity: 2.5 (1.1~3.5) kW
Heating Capacity: 3.2 (1.5~5.5) kW
MSZ-FB35VA
(MSZ-FB35VA + MUZ-FB35VA)
Cooling Capacity: 3.5 (1.1~4.1) kW
Heating Capacity: 4.0 (1.5~6.0) kW
MSZ-FB50VA
(MSZ-FB50VA + MUZ-FB50VA)
Cooling Capacity: 5.0 (0.8~5.8) kW
Heating Capacity: 6.0 (0.9~7.8) kW
ENERGY STAR is the global mark of energy
efficiency. All models in the FB range have been
awarded the ENERGY STAR signalling that they
meet strict energy efficiency guidelines. You can
rest assured these will provide the highest level of energy
efficiency without compromising on performance or quality.
Ideal for Asthma and Allergy sufferers.
Outdoor Units
MUZ-FB25/35VA
HEAT PUMP
Dimensions (W x D x H):
800 x 285 x 550mm
Infra Red
Remote Controller
DC
Inverter
Only
PAM
Control
20dB
Econo Cool
Anti-Mold
Flat Panel
Pure
White
AREA
AUTO
VANE
Area setting
FB25
Compact
ACO
MUZ-FB50VA
SWING
SWING
VERTICAL
HORIZONTAL
Cooling at
Cooling at
Heating at
Auto Restart
46°C/-10°C
-10°C
-15°C
12m
20m
15m
30m
MXZ
connection
Flare
connection
24-hour Timer
M-NET
On/Off connection
Centralised
Optional
Optional
Quick Clean
Self
Diagnosis
Ozone
Shower
Optional*:
PAR-21MAA
7 Day Timer
Weekly
Timer
Optional
Failure
Recall
FB25/35
For Further information on these features please see our web site: www.bdt.co.nz
FB50
*Requires
MAC-397IF-E
Dimensions (W x D x H):
840 x 330 x 850mm
Guaranteed
From
20dBA
Unique Energy Saving
Air Purification
Heating at
-15°C
, provides Efficient Temperature Control.
While conventional heat pumps can give your room an average temperature, areas will stand out
from the rest. Conventional thermostats simply can't measure the effects of factors such as radiant
heat or cold drafts from windows that affect room temperature. The advanced "i-see sensor"
detects more than just room temperature. Room temperature is measured at floor level as well at
the unit resulting in greater temperature control.
Wide Detection
The unique energy saving "i-see Sensor" automatically moves from side to side, searching out
temperature disparities. Wide airflow of 150° from left to right (90° in cooling mode) ensures all corners of the room are kept at an
optimal temperature. The "i-see Sensor" measures hot and cool spots and focuses airflow to those specific areas. The "i-see
Sensor" controls air temperature and air movement to prevent excessive heating or cooling and unnecessary operation. As a
result, you are ensured total comfort
Heating
Cooling
Monitoring floor level,
Monitoring floor level,
while reducing energy wastage.
to eliminate excessive
to warm up the room
cooling.
“Area Setting” - for waste-free,
energy-saving heating and cooling.
as required.
Cold air tends to drop to
floor level, which is often
the cause of over cooling.
The i-see Sensor detects
this foot-level temperature
and adjust the air outlet
temperature to prevent
over cooling.
In AREA mode, efficient heating or cooling
is targeted where it is really needed - the
right side, left side or the room as a whole.
The sensor can also operate only on the
selected side.
The Plasma Electrode unit
is attached inside this hole.
Besides a pre-filter, the unit is also mounted with two plasma
air-purifying functions. These functions are engineered to
remove airborne dirt particles from micron to nano-size in
scale.
Small
Big
The size of particle
Bacteria
Plasma Electrode Unit
A plasma electrode unit is mounted inside
the product. Electro-discharge is used to
generate ozone & plasma. The
combination of ozone & plasma and two
special filters makes a dynamic plasma air
cleaning function.
Bad odours
Pollen
Effective
Range
Warm air tends to rise up from
the floor level, which often
prevents that zone from
warming up. The i-see Sensor
detects
this
foot-level
temperature and adjust air
outlet flow to provide optimal
temperatures.
Formaldehyde
Mold spores
Dust
Filter
removes
Plasma Air Purification
function removes
Plasma Deodorisation
function removes
Plasma Deodorisation
Plasma Air Purification
"Platinum catalyst deodorising filter" is attached.
Minimum holes as small as 1 nanometer on a
surface of approximately 3,000m2 capture small
foul-smelling substances in the air, then break down
371.66
the source of the odours with the power of the
ozone generated in a plasma electrode unit and the
platinum catalyst contained in the filter.
"Anti-allergen electric enzyme filter" is
attached. The power of the static electricity
charged in the filter and the plasma
generated in the plasma electrode unit
team up to capture the bacteria, pollen and
other allergens in the air, which are then
neutralised with the enzyme in the filter.
Plasma Deodorising
Filter mechanism
Clean air
Platinum
Catalyst
Deodorising
filter
Nearly twice the
deodorising speed
compared to
previous model.
Plasma Air Purifying
Filter mechanism
Clean air
3
Anti-allergen
Electric
Enzyme
filter
3
1
1
Plasma
Electrode
Unit
2
Dirty air
1
2
3
Plasma electrode unit produces ozone.
Particles of odour-releasing substances
are absorbed.
Particles of odour-releasing substances
are decomposed by ozone.
1
2
3
Plasma electrode unit produces plasma.
Small particles are charged to negative
by plasma.
Small particles charged to negative are
collected to the positive side of the
electret filter and neutralised by enzyme.
Plasma
Electrode
Unit
2
Dirty air
Only
What is the "Ozone Shower"?
Whisper Quiet Operation
This is a self cleaning function where the indoor coil will
automatically be cleaned with Ozone after the unit has been
operating in the cooling mode, to ensure the coil is clean and
free from impurities.
Mitsubishi Electric have a long standing reputation for offering
some of the quietest models in the industry. The Deluxe MSZFB range is no exception. At only 20 dB(A) in Low Fan Speed
and capable of maximum output, the MSZ-FB25VA is the
quietest Heat Pump in New Zealand. You want to feel the
warmth, not hear it!
20dB
MSZ-FB25
Ozone (O3) is resolved gradually and naturally into oxygen
(O2). This process creates an extremely efficient cleaning
process. During resolving “Nascent oxygen (O)” is produced.
The nascent oxygen strongly oxidises airborne particles to
sterilise and deodorise the air.
O2 +
Oxygen
High voltage
O3
O2 + (O)
Ozone
Oxygen
Nascent Oxygen
The consistency of ozone during ozone showering remains within health regulations.
The room is at 0.01ppm or less, this is the equivalent consistency of ozone at the
beach or forest areas.
20dB
the
quietest
Controllers:
Optional: PAR-21MAA 7 Day Timer
Wake up or come home to optimal temperatures whilst conserving energy!
The controller allows your system to be programmed to maintain optimal temperature levels during the times when you are
likely to be in the room. In the periods where you are unlikely to be there (such as during work hours or sleep time), the
temperature can be set back to a minimum holding temperature instead of turning the system completely off.
Turning a system on and off typically uses the most energy because the system has to heat a room starting from a very low
temperature. By maintaining a minimum holding temperature Mitsubishi Electric inverter technology saves you energy as
the temperature only needs to be raised by a couple of degrees.
Most air conditioning systems come with a 24 hour remote controller. This means that you can only set the system up to
automatically turn on and then off within a 24 hour period. This needs to be manually reactivated each time. The new
Mitsubishi Electric 7 day timer allows you to program up to 8
separate Start/Stop patterns per day over a 7 day period.
For example:
• Between 6am and 9am set temperature to 21°C
• Between 9am and 5.30pm set temperature to18°C
• Between 5.30pm and 10pm set temperature to 21°C
The new clear and precise display is easy to
understand for any user.
Optional: AG-150 Central Controller (with Touch Screen /
Web)
Mitsubishi Electric offers the advanced AG-150 central controller. The colour
touch screen allows user friendly control of the entire air conditioning system.
The system can also be accessed from a computer using a web browser.
Operation Control Function
The PAR-21MAA 7 Day timer also allows the temperature range to
be limited to conserve energy by preventing excessive cooling and
heating. The controller panel can also be locked off to prevent
random modification.
AG-150
Optional: MAC-821SC-E (Centralised ON/OFF Controller)
An optional Centralised ON/OFF Controller (MAC-821SC-E*) can also be
incorporated to regulate all connected units in your home (and enabling ON/OFF
selection and operation status confirmation from one single controller).
Note:
The PAR-21MAA and MAC-821SC-E both require the MAC-397IF-E adaptor
per indoor unit.
MAC-821SC-E
MAC-397IF-E
Specifications:
MSZ-FB VA Deluxe Inverter Wall Mounted Heat Pump Model (R410A)
MODEL NAME
MSZ-FB25VA
Deluxe Wall Mounted
Inverter
Heat Pump
MSZ-FB35VA
INDOOR UNIT
OUTDOOR UNIT
MSZ-FB25VA
MUZ-FB25VA
2.5
MSZ-FB35VA
MUZ-FB35VA
3.5
MSZ-FB50VA
MUZ-FB50VA
5.0
1.1 - 3.5
1.1 - 4.1
0.8 - 5.8
0.53
0.89
1.60
0.26 - 0.97
0.26 - 1.12
0.26 - 2.45
4.76
3.93
3.13
TYPE
Capacity
Min-Max
[kW]
[kW]
Min-Max
[kW]
[kW]
Input
EER (COP)
COOL
6.0
6.0
5.0
20 / 29 / 36 / 42
20 / 29 / 36 / 43
29 / 39 / 45 / 52
[dB (A) ]
46
47
54
Rated Current (In/Out) [A]
Max Current [A]
2.6
4.1
7.1
10
10
16
Sound
Level
Star Rating
In (Lo-SH*) [dB (A) ]
Out
Air Volume In (Lo-SH*)
[L/s]
77 - 187
77 - 187
105 - 247
Capacity
3.2
4.0
6.0
Min-Max
[kW]
[kW]
1.5 - 5.5
1.5 - 6.0
0.9 - 7.8
0.66
0.90
1.64
Min-Max
[kW]
[kW]
0.48 - 1.90
0.48 - 1.90
0.48 - 2.95
4.89
4.44
3.66
6.0
6.0
5.5
20 / 29 / 36 / 43
21 / 29 / 36 / 44
27 / 37 / 43 / 50
Input
COP
HEAT
Sound
Level
Star Rating
In (Lo-SH*) [dB (A) ]
[dB (A) ]
46
50
56
Rated Current (In/Out) [A]
Max Current [A]
3.1
4.1
7.3
Out
Air Volume In (Lo-SH*)
[L/s]
10
10
16
75 - 202
78 - 208
92 - 247
Controller
Power Supply (Powered from outdoor unit)
INDOOR
OUTDOOR
EXT. PIPE
Quick Clean
MSZ-FB50VA
Dimensions (WxDxH) [mm]
Weight
[kg]
Dimensions (WxDxH) [mm]
Weight
[kg]
Sound Level
[dB (A)]
Diameter (Liquid/Gas) [mm]
Max. Length/Height †
[m]
Chargeless
[m]
Cooling
[oC]
OPERATION
RANGE Outdoor Heating
[oC]
The easily detachable front panel is simple to
wash, and the airflow vents can be opened without
any special tools for cleaning inside.
*
*Optional Quick Clean Kit.
5 Year Warranty
Mitsubishi Electric Air Conditioners / Heat Pumps
come with a full 5 year parts, labour and
compressor warranty. Warranty conditions apply.
Please be aware of these conditions prior to
purchasing this product.
Note:
1. Rating Conditions ( AS / NZS 3823 )
Cooling — Indoor: 27°C DB, 19°C WB Outdoor: 35°C DB
Heating — Indoor: 20°C DB Outdoor: 7°C DB, 6°C WB
Refrigerant piping length (one way): 5 m
2. Guaranteed operating range: see specifications table
3. Dry function will not work when the room temperature is below 13°C
Infra Red Remote (Optional: PAR-21MAA)
230V / Single Phase / 50 Hz
798 x 257 x 295
12
800 x 285 x 550
800 x 285 x 550
36
36
840 x 330 x 850
55
46
47 - 50
54 - 56
6.35 / 9.52
6.35 / 9.52
6.35 / 12.7
20 / 12
20 / 12
30 / 15
7
7
7
-10 / +46
-10 / +46
-10 / +46
-15 / +24
-15 / +24
-15 / +24
*Sound Level: Low / Medium / High / Super High. (SH = Super High).
Colour: Heat pump units shown may not be colour accurate, please
ensure you view an actual unit for colour matching.
† Maximum length is inclusive of height differential. i.e. (20/12) means
the pipe can be 12m high and 8m across for a total length of 20m.
Distributed by
AUCKLAND
WELLINGTON (HEAD OFFICE)
CHRISTCHURCH
Unit 1, 4 Walls Road
PO Box 12-726, Penrose
Phone (09) 526 9347, Fax (09) 526 9369
1 Parliament Street
PO Box 30-772, Lower Hutt
Phone (04) 560 9147, Fax (04) 560 9133
Suite 2, Level 1, 37 Mandeville Street
PO Box 1604, Christchurch
Phone (03) 341 2837, Fax (03) 341 2838
www.bdt.co.nz / 0800 QUIET AIRCON
New publication effective September 2008.
All features and specifications are subject to change and amendment at anytime.
Where specifications are critical to design or pre-build we advise that you seek confirmation of accuracy from our product management team on (04) 560 9100.
189
399
609
Try me for size!
This is the actual size of the MSZ-FB25 / 35 / 50VA
Dimensions (W x D x H): 798 x 257 x 295mm
798x295, double gate fold 189 + 210 + 210 + 189
Download PDF