ERES3500 | Operating instructions | Electrolux ERES 3500 Instruction Booklet
Add to my manuals
20 Pages
advertisement
r e f r i g e r a t o r
INSTRUCTION BOOKLET
GB
818 38 23--00/7
Downloaded from Fridge-Manual.com Manuals
ERES3500, ERES3500X
GB
Important Safety Instructions
Your new fridge may have other functions compared to your previous one.
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or warnings contact the Customer Care Department.
Keep the instruction booklet. It will come in handy if you later sell the appliance or give it to somebody else.
For the User
· The refrigerator is intended for the storage of foodstuffs and the production of cold water, with or without carbon dioxide, for normal household use in accordance with these instructions.
· If the gas cylinder is used for other purposes than that intended or if it is filled by an unauthorised person, all guarantees automatically become null and void . In order to ensure reliable functioning, only an
Electrolux Cylinder may be used.
·
Do not keep explosive gases or liquids in the refrigerator or freezer compartment. They may explode and cause injury and material damage.
·
Do not let sharp objects come into contact with
Scrapping old cabinets
the refrigerating system on the back of and inside the cabinet. If the refrigerating system is punctured, the cabinet will be damaged and foodstuff inside may spoil.
·
Do not keep carbonised drinks or bottles in the freezer compartment. The glass bottles may break.
·
The cabinet is heavy. The edges and projecting parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.
Child Safety
·
Pay attention so that small children do not gain access to the operating controls or the inside of the cabinet.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negativ consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Contents
Important Safety Instructions
Scrapping old cabinets
. . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
2
2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Description of the Appliance . . . . . . . .
Control Panel (Control panel)
Control Panel (water dispenser)
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
3
3
4
Before use . . . . . . . . . . . . . . . . . . . . . . . . .
4
Using the fridge . . . . . . . . . . . . . . . . . . . .
To start the fridge and thermostat control
Temperature inside the fridge
. . . . . . . .
. . . . . . . . . . . . . . . . .
Measuring the temperature
Alarms and other features
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cabinet interior . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
5
4
5
7
7
Hints and Tips . . . . . . . . . . . . . . . . . . . . .
Energy Saving Advice
Food Storage
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Operating Sounds . . . . . . . . . . . . . . . . . . . .
8
8
8
8
Maintenance and Cleaning
Removing the ventilation grille
. . . . . . . . . .
. . . . . . . . . . . . . . . .
9
9
Internal Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . .
Servicing and cleaning the water dispenser
Service during operation
. . . . . .
. . . . . . . . . . . . . . . . . . . . .
Defrosting the fridge . . . . . . . . . . . . . . . . . . . . . . . .
To change the light bulb . . . . . . . . . . . . . . . . . . . . .
Installation of carbon filter . . . . . . . . . . . . . . . . . . .
When the appliance is not in use . . . . . . . . . . . . . . .
Something Not Working . . . . . . . . . . . .
11
10
10
10
10
9
9
10
Service and Spare Parts
Customer Care Department
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
12
12
Standard Guarantee Conditions
Standard Guarantee Conditions
. . . . .
. . . . . . . . . . . . . . . .
12
12
Technical Specification . . . . . . . . . . . . .
Permissible water pressure (to ensure reliable function) . . . . . . . . . . . . . . . . . . . . . . .
13
13
Installation . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the transport supports . . . . . . . . . . . . . .
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the water hose . . . . . . . . . . . . . . . . . . . .
Installation of carbon filter
Electrical cord
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
13
14
14
14
15
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
2
Installing the appliance . . . . . . . . . . . . . . . . . . . . . .
.
15
When the water system is started for the first time 16
Guide to use the instruction book
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . .
17
The following Symbols will be found in the text to guide you through the instructions
1, 2, 3 ...
Safety instructions
Step by step instructions for an operation
Hints and tips
Description of the Appliance
1
2
3
4
8
9
4
4
10
9
9
5 5
11
4
6
7
Control Panel
(Control panel)
Modell ERES3500/ERES3500X
1.
grid
2.
bottle- and can holder
3.
quick chill shelf
4.
glass shelf
5.
wire basket
6.
vegetable drawer
7.
ventilation grille
8.
butter compartment
9.
door shelf
10. egg holder
11. bottle shelf
5
ACTION
COOL
A. Refrigerator power switch
Switches the refrigerator on and off.
B. Temperature display
Shows the average temperature inside the refrigerator.
C. Temperature adjustment buttons/thermostat
Used to set the temperature in the refrigerator.
D. ACTION COOL button
Used to switch the Action Cool feature on and off.
Downloaded from Fridge-Manual.com Manuals
3
A B C D E F G
E. Yellow pilot light
Lights when Action Cool is operating.
F. Alarm off button
Used to turn the audible alarm off.
G. Red warning light
Flashes when one of the alarms in the cabinet has been triggered.
Electrolux 8183823-00/7
Control Panel
(water dispenser)
H I M
H. Yellow indicator lamp
Lights up when the locking function has been activated.
I. Button for carbonated water.
- Used for the choice of carbonated water.
- For the engagement and disengagement of the locking function.
J. Button for ordinary water.
- Used for the choice of ordinary water.
- Switches the background lighting on and off.
Before use
·
Remove all securing tapes.
·
Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5ml to
0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.
L
Do not use detergents, abrasive powders, highly perfumed cleaning products, wax, polishes or products containing alcohol.
Check that the drain hose is located over the drip bowl behind the refrigerator. Also ensure that the drain hose is connected to the box. See the illustration.
·
Before inserting the power plug into the socket and switching on the appliance for the first time, leave it
Using the fridge
To start the fridge and thermostat control
Switching on:
Switch on the fridge by pressing the power switch.
Setting the temperature
Press the buttons until the desired temperature flashes in the temperature display (The temperature can be set between +2°C and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
Once set, the temperature display shows "-" until the temperature inside the fridge reaches +9°C or below.
Allow the appliance to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the appliance.
N J
K
- Switches off the indicator lamp for water filter replacement.
K. Yellow indicator lamp
Lights up when the water filter must be changed.
L. Water out-feed
Activated when a glass or something similar is pressed upwards against the flap.
M. Flap
N. Lighting
standing upright for about 30 minutes, or for 2 hours if it was transported horizontally. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor.
5
5
ACTION
COOL
ACTION
COOL
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
4
It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use.
The thermostat recalls the previously set temperature.
Temperature inside the fridge
Suitable storage temperature in the fridge is roughly
+5°C. Storage temperature in the cabinet is even on all of the shelf levels. The vegetable box which is placed in the bottom has a temperature of 3-4°C warmer than the intended temperature setting.
Measuring the temperature
If the temperature is measured using a standard, single thermometer, this should be put in a glass of water centrally placed inside the appliance. This will reflect the temperature inside the food products. Do not place the thermometer hanging or lying directly on the shelf.
· Distribute foodstuffs to allow cold air to circulate freely between the products.
· Also never put warm products into the cabinet.
Wait until they have cooled down.
· Cover all foods properly.
Alarms and other features
Door open alarm
If the fridgedoor remains open for more than 5 minutes, the red warning lamp starts flashing and an audible alarm sounds.
To switch off the alarm:
Press the "alarm shut-off button". The red warning lamp goes out when the door is closed.
Quick chill (Action cool / quick chill)
This function has two usage areas. One area in connection with cans / bottles being quickly chilled on the quick chill shelf, and the other in connection with large amounts of food at room temperature being placed on the shelf.
Chilling of cans/bottles:
When groceries are placed on the shelf (see under section; Action cool / Quick chill shelf) the air regulator should be turned to it's maximum position, then press the Quick chill button.
This will be indicated in the symbol window with a
"C" and by the yellow lamp being lit.
Chilling of warm groceries:
This function is used in connection with large amounts of groceries at room temperature being placed in the fridge. Pressing the Quick chill button starts this function.
This will be indicated in the symbol window with a
"C" and by the yellow lamp being lit.
When this function has been activated forced air will chill the groceries, and the temperature in the cabinet reset to +2°C. After 6 hours the Quick chill automatically shuts off and the temperature gradually goes back to its normal setting.
Downloaded from Fridge-Manual.com Manuals
5
MAX
5
ACTION
COOL
MIN
C
ACTION
COOL
Electrolux 8183823-00/7
Carbon filter's function:
The built-in carbon filter means that strong smelling groceries can be placed near other groceries without affecting their taste or aroma.
The functions of the water dispenser
The locking function:
The locking function is activated by the production plant.
For temporary unlocking:
Keep the button (I) or (J) pressed in for about three seconds until the yellow indicator lamp (H) goes out.
The locking function is re-activated automatically after about three seconds.
For permanent unlocking:
Keep the buttons (I) and (J) pressed in at the same time for about three seconds. The button (I) or (J) lights up to indicate unlocking.
To activate the locking function:
Keep the buttons (I) and (J) pressed in at the same time for about three seconds. Activation is indicated by the yellow indicator lamp (H) lighting up.
Selecting and obtaining water:
Before obtaining water, selection is carried out either by pressing the button for carbonated water (I) or the button for ordinary water (J). The actual choice is indicated by the button concerned lighting up. The selection of water can be changed while the water is running.
Water i s obtai ned by pressing a glass or other container agai nst t he opening (M). St op the wat er fl ow by moving the glass or container downwards away from the opening (M). Any water that drips or is spilled is collected in the drip bowl below the water dispenser. When carbonated water is being obtained, there is a slight afterflow when the glass is removed.
The drip bowl can be detached and emptied when necessary.
Lighting:
The wat er dispenser lighting (N) goes on automat ically when water is obtained.
For continuous lighting:
1. Make sure that the water dispenser is unlocked.
2. Then hold the button for ordinary water (J) pressed in for about three seconds until the lighting goes on.
The lighting then goes on with about 50 % of its full intensity.
To switch off the lighting:
1. Ensure that the water dispenser is unlocked.
2. Then hold the button for ordinary water (J) pressed in for about three seconds until the lighting goes out.
Downloaded from Fridge-Manual.com Manuals
6
H I M
L
N J K
Electrolux 8183823-00/7
Indicator lamp for the water filter:
The water dispenser is fitted with an indicator lamp
(K) which shows when it is time to change the water filter. When the indicator lamp stays on, then the water filter has been utilised to about 80 % of its expect ed lifetime. In t his situation, it is recommended that you buy a replacement filter. When the indicator lamp starts flashing, the water filter has been utilised to 100% of its lifetime. Replace the filter without delay.
After replacing the filter cartridge, see the section
"Service during operation". The indicator lamp can be switched off by holding the button for ordinary water (J) pressed in for about three seconds until the indicator lamp goes out.
Switching off
Switch off the cabinet by pressing the power switch.
Keep the button pressed for approx. 1 second.
Power to the cabinet is completely interrupted only when the power plug is disconnected.
Cabinet interior
The shelves and door compartments are removable and can easily be re-arranged.
Certain shelves must be lifted up by the rear edge to enable them to be removed.
The lower door compartment and the glass shelf above the salad drawer must not be moved. They are required for proper air circulation inside the cabinet.
Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet.
The vegetable box has a ventilation edging to increase the circulation of air and reduce the risk of condensation.
The vegetable box has two moveable partitions with five different choices in order to separate different vegetables.
The wire baskets
The refrigerator is fitted with two wire baskets, which can be lifted out and provide space in front of the service cover.
The wire baskets can al so be used for bottles/foodstuffs or as "breakfast baskets".
The upper shelf can be moved.
Downloaded from Fridge-Manual.com Manuals
7
5
ACTION
COOL
Electrolux 8183823-00/7
Bottle- and can holder
The side of the bottle and can holder is moveable to enable a more flexible placement of cans and bottles in front of the grid. To allow the holder to be moved easier, when moving sideways, press the shelf backwards.
During chilling of cans or bottles the article should be centrally placed in front of the grid to obtain the best chilling effect.
The bottle support can be pulled out when chilling larger bottles.
For a description of this functions start and stop, see under heading Quick Chill.
Quick chill shelf:
The lower Quick chill shelf can be placed in one of the upper grooves. To maintain the best performance the shelf should be placed in the second groove from the top.
Dismantling of the bottle-- and can holder.
Take out the Quick Chill shelf with holder from the cabinet.
To loosen the holder from the shelf, bend the hooks/brackets that surround the backside of the shelf.
Hints and Tips
Energy Saving Advice
·
Pay careful attention to where the cabinet is placed. See the section "Installation". When installed correctly, the cabinet will consume less energy.
·
Try to avoid keeping the door open for long periods, or opening the door too frequently as warm air will enter the cabinet, and cause the compressor to switch on unnecessarily often.
·
Ensure there are no obstructions preventing the door from closing properly.
·
Thaw frozen food in the fridge. This will ensure safer defrosting of foods and reduce the work of the refrigeration unit
·
It is advisable to periodically clean the refrigeration system at the back of the appliance with a duster or vacuum cleaner.
·
Always leave warm food to cool downn to room temperature before placing in the fridge.
·
Make sure the door gasket is complete and always clean.
Food Storage
·
To obtain the best results from your appliance, neither hot foods nor liquids which may
Downloaded from Fridge-Manual.com Manuals
8 evaporate, should be placed in the larder compartment.
·
Avoid buying frozen food if you can not store it straight away. The use of an insulated container is advisable. When you arrive home place the frozen food in the freezer immediately.
·
Ensure that food placed in the freezer is dated and labelled and used in date order to ensure that food is consumed at its best.
Remove suspect food from you refrigerator and clean, refer to cleaning and maintenance.
Normal Operating Sounds
·
You may hear faint gurgling or bubbling sounds when the refrigerant is pumped through the coils or tubing at the rear, to the cooling plate/evaporator.
·
When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise from the compressor.
·
A thermostat controls the compressor and you will hear a faint " click" when the termostat cuts in and out.
Electrolux 8183823-00/7
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash the grille.
Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it.
Internal Cleaning
Clean the cabinet at regular intervals.
Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product
Internal Cleaning
Disconnect the appliance from electricity supply.
Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0,5 litre water)
Rinse and dry thoroughly.
Regularly check the door seals and wipe clean to ensure they are clean and free from debris.
External Cleaning
Use water/neutral soap emulsion for cleaning the surface of stainless steel, anti-finger-print coated.
Absolutely not to use abrasive paste.
Wash the outer cabinet with warm soapy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Servicing and cleaning the water dispenser.
Never use cleaning agents with a grinding or aggressive effect.
When necessary, clean the surfaces of the dispenser and the water container that are accessible from the outside, using only a soft cloth and warm water.
The dispenser drip bowl can be cleaned with a tepid solution of manual dishwashing agent and water.
If the system is not be used for a long period, it is advisable to remove the filter and empty out the water. Then place it in a sealed plastic bag. Store the filter in a freezer. Turn off the water connection to the refrigerator.
When the refrigerator is to be used again, rinse the system through thoroughly by draining off at least three litres (5 pints) of water. Before re-fitting the filter, all its parts must be thoroughly thawed out.
If necessary, all systems containing water must be sanitized by ordering the necessary sanitizing kit through Electrolux Service Force Centre (tel: +44
8705 929 929) or through our website www.electrolux.co.uk.
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
9
Service during operation
The water filter is replaced as follows:
Place a piece of kitchen tissue or a dishcloth in the space under the filter. Remove the filter by turning it clockwise. A small amount of water will run out. Dry off and fit the new filter.
See the section "When starting the water system for the first time".
The water connection does not need to be switched off when changing the filter.
Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts".
The gas cylinder is replaced as follows: remove the gas cylinder and move over the adapter to the new cylinder.
The replacement gas cylinder is obtained through your local dealer.
Defrosting the fridge
The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping it open too long.
To change the light bulb
The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting it into the socket. Do not touch the bulb with your bare fingers. Halogen light bulbs are sensitive to grease from the skin.
Use a clear, UV-blocked, low-pressure type halogen light bulb. Socket G4. Voltage 12 V. Power rating
20 W/bulb.
Installation of carbon filter
To maintain the best performance the carbon filter should be changed once a year with normal usage.
New carbon filters can be purchased from your local dealer. The filter is placed behind the grill and can be reached by opening the cover. The cover can be opened by simultaneously pressing the lever on the right of grill (1) and turning the cover outward (2).
The carbon filter is then pulled out of its slot (3).
The new carbon filter is placed in the existing slot -
The filter should be handled carefully so fragments don't loosen from the surface.
When the appliance is not in use
Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.
If the appliance is left on, e.g. while on holiday, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
2
1
G4
20W/12V
UV-blocked
Low pressure
3
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
10
Something Not Working
Before contacting your local Service Force Centre check the following points:
Symptom Solution
" " is displayed in the temperature display.
The temperature is too high inside the refrigerator.
An error has occurred in measuring the temperature. Call your service representative. (The cooling system will continue to keep food products cold, but temperature adjustment will not be possible.)
Set a lower temperature.
Put food products in the right place inside the refrigerator. See the chapter "Temperature inside the refrigerator".
Distribute the food products to allow cold air to circulate around them.
Make sure that the door is completely closed and that the rubber door seal is complete and clean.
Set a warmer temperature.
It is too cold inside the refrigerator.
Water comes out on the floor.
Place the drain hose at the back of the appliance above the drain bowl. See the chapter "Before use"
The compressor operates continuously.
Set a warmer temperature.
Make sure that the door is completely closed and that the rubber door seal is complete and clean.
The cabinet does not operate at all.
Cooling or interior light does not operate. No indicator lamps light.
Noise
The refrigerating system will always produce some sounds. A pulsing sound is heard when coolant is pumped inside the cooling pipes. A ticking sound from the thermostat can be heard when the compressor switches on and off. The sound level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes) come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the cabinet".
Not enough carbon dioxide in the water
Incoming water pressure too low.
Drain off a large amount of carbonated water (about 1 litre)
The carbon dioxide is running out. Replace the gas cylinder.
Storage temperature too high. Lower the temperature in the refrigerator.
Too much carbon dioxide in the water
Power does not reach the appliance. (Try connecting another electrical device to the power outlet.)
The appliance is not switched on.
The fuse has blown.
The power plug is not properly connected.
No carbon dioxide.
Dilute with ordinary water. (See the section "The water dispenser functions")
The gas cylinder is empty. Replace the gas cylinder.
Drain off a large amount of carbonated water (about 1 litre)
Incoming water pressure too low.
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
11
Water flow very low
Only gas comes out when opening
Remove and clean the strainer in the connecting valve.
Sediment in the water. Replace the filter or install a pre-filter.
Incoming water pressure too high. Install a pressure-limiting device.
Capacity temporarily exceeded. Wait for ten minutes.
The water dispenser lamp flashes
Leakage at the water connection. Remedy the leakage and empty the box by pulling out the red plug.
See the illustration in "Connecting the water hose".
The filter has been totally utilised. Replace the filter.
The indicator lamp flashes.
The indicator lamp stays on and shows yellow
80 % of the filter capacity expended. Buy a new filter.
Delivery is interrupted after a short time The maximum time of two minutes is attained. Continue with delivery.
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning:
08705 929929
Your tephone call be automatically routed the Service Force Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details under the heading "Something Not
Working".
When you contact the Service Forse Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance (found on the rating plate)
5. The purchase date.......................................................
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Electrolux appliance or further information on Electrolux products, you are invited to contact our Customer Care Department by letter or phone as follows or visit our website at www.electrolux.co.uk
Customer Care Department
Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 08705 950950*
* calls to this number may be recorded for training purposes.
Standard Guarantee Conditions
Standard Guarantee Conditions
See Guarantee Conditions on the Registration Card.
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
12
Technical Specification
Model
Volume Refrigerator
Width
Height
Depth
Energy consumption
Energy class
Rated power
ERES3500/ERES3500X
311 l
595 mm
1800 mm
650 mm
175 kWh/år
A
70 W
Permissible water pressure
(to ensure reliable function)
.
The total flow in the system can vary, depending on local water conditions and/or water pressure.
Lowest permissible water pressure. 2,5 bar (250kPa)
Highest permissible water pressure. 5 bar (500kPa)
Consult your installer if water pressure is less than 2,5 bar.
If water pressure exceeds 5 bar, than a reduction valve must be fitted (available from your specialist shop).
In case of extreme humidity, please open the slots totally.
Installation
Unpacking
Unpack the appliance and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling.
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Removing the transport supports
Remove the tape and the transport supports from
· the door sides
· inside the door hinges
· the shelves
Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the appliance. Do not remove this pad.
Downloaded from Fridge-Manual.com Manuals
13
Electrolux 8183823-00/7
Cleaning
Wash the inside of the appliance using lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Connecting the water hose.
Remove the transport protector from the valve connector, see the illustration.
Connect the water hose supplied with the hose fitting to the refrigerator water valve, which is located in a box behind the refrigerator.
Place the hose in the desired direction and then tighten the connecting nut properly to prevent leakage. The nut is only to be tightened by hand.
The water hose must not be cracked, squeezed or be in tight bends. The hose is finally to be fixed with the aid of the securing strip supplied.
The water coupling is then connected to a water tap with an external 3/4 inch thread. This work is to be carried out by a skilled plumbing installation technician. The refrigerator is to be connected with a shut-off cock. There are different type-approved taps and tap assemblies on the market.
If you require a longer water hose than that supplied, then a VDE-approved 150 38 85-02/0 supply hose should be used.
Before the refrigerator is taken into use in its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the refrigerator water valve or to the water tap, and that the four spacers are properly in position, see the illustration.
We recommend that the refrigerator is placed on a
"run-off" mat intended for refrigerators and freezers, which makes it easier to detect possible leakage.
This run-off mat is available from your dealer.
Installation of carbon filter
On delivery the carbon filter is placed in a plastic bag to secure the length of life of the carbon filter.
The filter should be placed behind the grill before the appliance is turned on.
Open the grill and mount the carbon filter.
The cover can be opened by simultaneously pressing the lever on the right of grill (1) and turning the cover outward (2). The carbon filter is then mounted in the slot found in the back of the cover.
The filter should be handled carefully so fragments don't loosen from the surface.
2
1
Downloaded from Fridge-Manual.com Manuals
14
3
Electrolux 8183823-00/7
Electrical cord
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.
·
Damage to the cord may cause a short-circuit, fire and/or electric shock.
·
In the event of damage to the appliance's main cable, only an authorised service company recommended by the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Installing the appliance
When two appliances are placed beside each other, the spacers enclosed in the plastic wrapping should be glued between the appliances. As shown in the illustration.
To obtain the best performance from the appliance, ensure :
· the appliance is placed in a dry, cool place and is not exposed to direct sunlight.
· the appliance is not placed close to a source of heat, e.g. a cooker or dishwasher.
· the appliance is level. The appliance should not lean against any wall. If necessary adjust the feet using the adjustment spanner supplied.
· there is good air circulation around the appliance and that the air channels below and behind the appliance are not blocked. The ventilation space above the appliance must be at least 4 cm.
The ventilation space can either be a) directly above the appliance, or b) behind and above the top cupboard. In this case, the space behind the cupboard must be at least
50 mm deep.
The appliance must be placed at a location whose ambient temperature corresponds to the climate classification*, for which the appliance is designed.
* See on the rating plate on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification.
Climate classification for an ambient temperature of
SN +10°C to +32°C
N
+16°C to +32°C
ST
T
+18°C to +38°C
+18°C to +43°C a) b)
50mm
If the appliance is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the appliance must be at least 230 mm to allow the door to open enough so that the shelves can be removed.
Check that the drain hose at the rear of the appliance discharges into the drip tray.
The power plug must be accessible after installation of the appliance.
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
15
When the water system is started for the first time.
The following should be carried out when the refrigerator is correctly connected to the water supply in the building:
Open the tap on the water connection and start up the refrigerator. The water system main valve opens and the system starts to fill up. Wait for five minutes.
Unpack the filter provided and connect it as follows:
- Remove the filter protective cap and insert the filter connector into the filter seat and turn as shown in the illustration (1) until the filter engages and the projection on the filter cartridge is opposite the mark on the plastic cover. See also the illustration and the instructions on the inside of the service hatch.
- Unlock the water dispenser. See the section "The water dispenser functions" Select carbonated water and drain off about 1.5 litres (2.5 pints) of water.
There may be some air to start with.
Connect the gas cylinder provided as follows:
- Take out the gas cylinder from plastic bag and screw the gas cylinder into the adapter (3) for this purpose, which is located in the valve, doing this by hand without tools.
- Place the gas cylinder with adapter in the valve and ensure that the valve bracket hooks are under the counterhold on the adapter (5). Then turn up the bracket lever (6) in one continuous movement. See the illustration and the instructions on the inside of the service hatch.
- Unlock the water dispenser and drain off a further
1.5 litres (2.5 pints) of water or until there are signs that the carbonated water in the water dispenser is starting to run.
- The system is now ready for use. In order to obtain the best possible performance from the refrigerator, wait until the set temperature is reached. A low temperature provides more carbon dioxide, a high temperature less carbon dioxide.
Re-hanging the door.
It is not possible to re-hang the door. The water supply goes through the hinge to the water dispenser.
Contact your dealer for more information.
1
5
3
6
2
4
Downloaded from Fridge-Manual.com Manuals
16
Electrolux 8183823-00/7
Electrical connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362) fuse must be used.
Should the plug need to be replaced for any reason.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow -Earth
Blue
Brown
-Neutral
-Live
The wire coloured green and yellow must be connected to the terminal marked with the letter "E" or by the earth symbol yellow.
or coloured green and
The wire coloured blue must be connected to the terminal marked "N" or coloured black
The wire coloured brown must be connected to the terminal marked "L" or coloured red.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
Downloaded from Fridge-Manual.com Manuals
17
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
18
Electrolux 8183823-00/7
Downloaded from Fridge-Manual.com Manuals
19
Electrolux 8183823-00/7
www.electrolux.com
Downloaded from Fridge-Manual.com Manuals
MARIESTAD DT-AV
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement