Crestron MK-QM-RMCRX
Mounting Kit
Installation Guide
This document was prepared and written by the Technical Documentation Department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2004 Crestron Electronics, Inc.
Crestron MK-QM-RMCRX
Mounting Kit: MK-QM-RMCRX
Description
The Crestron MK-QM-RMCRX provides a sturdy mounting to a 1¼ –
1½ inch I.D. (inside diameter) galvanized steel pole for the QM-
RMCRX. The simple to use hardware provides a robust clamp for the
QM-RMCRX, and permits mounting the unit close to the display device. This allows for shorter cable runs and easy access.
NOTE: Ensure that the installation meets all required local safety codes and the pipe load capacity is certified.
Supplied Components
Metal Bracket, Mounting, Top
Metal Bracket, Mounting, Bottom
#6-32 Screw, 1.25”L, Stainless
Steel, Pan Phil, Blk
#6 Spacer, 7/8”L, Round, .250”OD,
Black
¼”-20 Screw, 1.5”L, Stainless Steel,
Socket, Blk
Washer, Flat, Steel, B Narrow
0.500” OD, 0.281” ID, 0.063”TH, Blk
NUMBER
2009784
2009785
1
1
2009913 4
2009911
2009915
4
2009932 2
2
Installation Guide – DOC. 6247 Mounting Kit: MK-QM-RMCRX ● 1
Mounting Kit Crestron MK-QM-RMCRX
Installation
Tools Required
• #1 Phillips screwdriver
• ¼” Allen wrench
Mounting Instructions
The MK-QM-RMCRX attaches to the PEM nuts in the cover of the
QM-RMCRX. There are three possible mounting positions.
• Using the top center PEM nuts in the QM-RMCRX cover
• Using the left side PEM nuts in the QM-RMCRX cover
• Using the right side PEM nuts in the QM-RMCRX cover
NOTE: Use care not to block the fan or the ventilation holes when mounting the QM-RMCRX.
Top Cover PEM Nut Locations
1.20 in
(3.05 cm)
2.02 in
(5.13 cm)
2.70 in
(6.86 cm)
2 ● Mounting Kit: MK-QM-RMCRX
2.13 in
(5.41 cm)
Installation Guide- DOC. 6247
Crestron MK-QM-RMCRX
Left and Right Side Cover PEM Nut Locations
0.30 in
(0.76 cm)
0.73 in
(1.85 cm)
2.13 in
(5.41 cm)
1.20 in
(3.05 cm)
0.30 in
(0.76 cm)
1.20 in
(3.05 cm)
2.13 in
(5.41 cm)
1.55 in
(3.94 cm)
Mounting Locations, Top, Left, or Right Side
TOP BRACKET
POLE
BOTTOM BRACKET
Installation Guide – DOC. 6247 Mounting Kit: MK-QM-RMCRX ● 3
Mounting Kit Crestron MK-QM-RMCRX
1. Mount the bottom bracket of the MK-QM-RMCRX to the
QM-RMCRX PEM nuts using the four #6-32 screws and spacers provided.
Bottom Bracket Mounting
#6-32 SCREW
BOTTOM
BRACKET
#6 SPACER
TOP OR SIDE
COVER OF
QM-RMCRX
PEM NUTS
2. Secure the assembly to the customer-supplied pole by using the top bracket and the two ¼”-20 screws and washers provided.
NOTE: An Allen wrench is required to tighten the ¼”-20 screws.
4 ● Mounting Kit: MK-QM-RMCRX Installation Guide- DOC. 6247
Crestron MK-QM-RMCRX
Top Bracket Assembly to Customer-Supplied Pole
1/4-20 SCREW
1/4-20
WASHER
1.25 - 1.50 in.
STEEL POLE
NOT SUPPLIED
TOP
BRACKET
BOTTOM
BRACKET
#6 SPACER
TOP OR SIDE of the QM-RMCRX
Installation Guide – DOC. 6247 Mounting Kit: MK-QM-RMCRX ● 5
Mounting Kit
Completed Bracket Assembly
STEEL POLE
NOT SUPPLIED
Crestron MK-QM-RMCRX
TOP OR SIDE
OF QM-RMCRX
6 ● Mounting Kit: MK-QM-RMCRX Installation Guide- DOC. 6247
Crestron MK-QM-RMCRX
Further Inquiries
If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of the Crestron award winning customer service team by calling:
• In the US and Canada, call the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
• In Europe, call Crestron International at +32-15-50-99-50.
• In Asia, call Crestron Asia at +852-2341-2016.
• In Latin America, call Crestron Latin America at
+5255-5093-2160.
• In Australia and New Zealand, call Crestron Pacific at
+613-9480-2999.
You can also log onto the online help section of the Crestron website
(www.crestron.com) to ask questions about Crestron products. Firsttime users will need to establish a user account to fully benefit from all available features.
Installation Guide – DOC. 6247 Mounting Kit: MK-QM-RMCRX ● 7
Mounting Kit Crestron MK-QM-RMCRX
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.
8 ● Mounting Kit: MK-QM-RMCRX Installation Guide- DOC. 6247
Crestron MK-QM-RMCRX
This page intentionally left blank.
Installation Guide – DOC. 6247 Mounting Kit: MK-QM-RMCRX ● 9
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576 www.crestron.com
Installation Guide – DOC. 6247
01.04
Specifications subject to change without notice.
