2284

2284
Isolation amplifier
2284
– Galvanically separated input, output, and supply
– Bipolar current / voltage input
– Signal conversion
– Current and voltage output
– 24 VDC supply or universally supplied
– Applicable in PELV/SELV circuits
Advanced features
• Programmable input and output ranges using internal DIPswitches.
• Front panel fine adjustment of 0 and 100% values for special
ranges.
Connections
Application
• Galvanic separation of analog signals.
• Measurement of floating signals.
Technical characteristics
• Analog signal conditioning with microprocessor based gain
and zero offset with a fast response time of less than 25 ms.
• Signal conversion within the ranges: -250...+250 VDC or 50...+50 mA on the input and 0...10 (20) VDC and 0...20 mA
on the output.
• Galvanically separated between input, supply, and output.
• 2-wire transmitter supply and a reference voltage of 2.5 VDC,
max. 15 mA for short circuit-protected supply of
potentiometers.
• Buffered voltage output 0...20 V, 10 mA.
• The output can be ordered for standard 0/4...20 mA, and
0/1...5mA or special currents and selectable voltages within
the signal range 0...1 VDC or and ranges 0...10 VDC.
• Output signal reversal.
• Mounting for a standard 11-pole socket which can be adapted
for DIN rail or plate use with PR’s 7023 adaptor and 7024
mounting keying.
This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability
Environmental Conditions
Specifications range.......................................
Calibration temperature.................................
Relative humidity............................................
Protection degree...........................................
Output specifications
-20°C to +60°C
20...28°C
< 95% RH (non-cond.)
IP50
Mechanical specifications
Dimensions (HxWxD)..................................... 80.5 x 35.5 x 84.5 mm (D is
without pins)
Weight DC / universally supplied................... 125 g / 165 g
Common specifications
Supply
Supply voltage............................................... 19.2...31.2 VDC
Supply voltage, universal............................... 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Isolation voltage
Isolation voltage, test /
working........................................................... 3.75 kVAC / 250 VAC
Current output
Signal range...................................................
Min. signal range............................................
Load (@ current output).................................
Load stability..................................................
Current limit....................................................
0...20 mA
4 mA
≤ 1000 Ω
≤0.01% of span / 100 Ω
23...28 mA
Voltage output through internal
shunt.............................................................. See manual for details
Observed authority requirements
EMC............................................................... 2014/30/EU
LVD................................................................ 2014/35/EU
PELV/SELV.................................................... IEC 364-4-41 and EN 60742
Approvals
EAC................................................................ TR-CU 020/2011
Response time
Response time (0...90%)............................... < 25 ms
Max. power consumption............................... ≤ 2.4 W (2284--D)
Max. power consumption............................... ≤ 2.5 W (2284--P)
Signal / noise ratio......................................... Min. 60 dB
Effect of supply voltage change..................... < 0.005% of span / VDC
2-wire transmitter supply
(pin 7...5)........................................................ 19...28 VDC / 20...0 mA
Auxiliary voltages: Reference
voltage............................................................ 2.5 VDC ±0.5% / 15 mA
Temperature coefficient................................. < ±0.01% of span / °C
Linearity error................................................. < 0.1% of span
EMC immunity influence................................ < ±0.5% of span
Input specifications
Common input specifications
Max. offset...................................................... 50% of max. value
Current input
Measurement range....................................... -50...+50 mADC
Min. measurement range (span).................... 0.53 mADC
Input resistance.............................................. Nom. 50 Ω
Voltage input
Measurement range....................................... -250...+250 VDC
Min. measurement range (span).................... 27 mVDC
Input resistance.............................................. >1 MΩ...<10 MΩ
2284-042016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement