excom - Intrinsically Safe I/O System

excom - Intrinsically Safe I/O System
TURCK
Modular Industrial I/O System for Hazardous Areas
The excom® System
excom is a remote I/O system for use in hazardous locations. It provides PROFIBUS ®-DP compatible I/O modules in an IP
20 protected solution for connecting discrete and analog intrinsically safe field devices. It is approved for use in Class I,
Division 2 locations, and may be connected to field devices in Class I, Division 1 areas.
The modular system consists of power modules, PROFIBUS-DP communication gateways, I/O modules and a backplane
rack. The backplane is available in two sizes, with support for 8 or 16 I/O modules. The larger rack (MT18…) also allows
for redundant power supplies and PROFIBUS-DP gateway cards to be used. This allows a failsafe communication scheme
to be used.
The I/O modules provide the interface to field devices. The backplane provides power for I/O from the mounted power
supply, with no need for a separate field supply. The gateways, power supplies and I/O cards are simply plugged into the
backplane rack, with all power, PROFIBUS-DP and I/O wiring separate from the removable modules. I/O modules may also
be changed during operation (“hot-swapped”). The system automatically checks whether a newly inserted module matches
the configuration.
The internal cycle time of the excom system is less than 5 ms for discrete signals and less than 20 ms for analog signals.
Total response time of the PROFIBUS-DP system depends on the cycle time of the controller and its program, as well as the
data rate of the PROFIBUS-DP system. HART values may be exchanged with supported devices via PROFIBUS-DPV1
communication.
In order to use the excom system in a hazardous area, the PROFIBUS-DP communication must be conditioned through a
segment coupler. Couplers are available for both wire and fiber-optic media.
Redundant power supply
Bus address setting via
coded rotary switches
Open I/O modules in
various designs
Integrated rails for module
mounting, coding
Gold-plated connectors for
connection of I/O modules
Backplane
LEDs for status/I/O
status indications
Two redundant
gateways possible
E1
Connection of external
supply voltage
Connection of higher
level field bus
Connection of
field devices
Module front cap with
mechanical coding
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
Diagnostics
The excom gateway provides extended PROFIBUS-DP diagnostic information, including channel-specific error indication.
Each module also features LEDs for visual error indication as well as I/O status. Consult the user manual for the excom
system for detailed information.
Addressing
excom
The I/O modules need no user configured address since the gateway recognizes them by which backplane slot they are
inserted in. The excom system itself needs a PROFIBUS-DP address, which is set via three rotary switches. The maximum
address of the system is 125.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
excom Gateway Selection Guide
Gateway
Higher Level System
Pages
PROFIBUS®-DP
E4
excom Module Selection Guide
Modules
Type
Discrete
I/O Direction
Pages
Input
E5
Output
E7
Input & Output
E9
Input
E11, E17
Output
E13
Input
E15
Analog
Frequency/Counter
Accessories
E19 - E24
Certification Table
Housing
FM
CSA
DM80EX
DO40EX
AIH40EX
AIH41EX
AO40EX
AI41EX
TI40EX
GDP 1.5
PSD24EX
MT 9
MT 18
SC12-EX
E3
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
PROFIBUS-DP Gateway
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Various I/O Styles
Electrical
• Power Consumption: <3 W (from backplane)
Mechanical
• Operating Temperature: -20 to +60°C (-4 to +140°F)
• Protection: IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
Diagnostics (Physical)
excom
• LEDs to indicate status of PROFIBUS-DP and backplane communication
GDP1.5
PROFIBUS-DP Connector
1 = Shield
3 = BUS_B
5 = DGnd
6 = +5 VDC
8 = BUS_A
Note: Connector is mounted to the excom backplane rack.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
4 Channel
Discrete Input Module
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• NAMUR Inputs
Electrical
• Power Consumption: <2 W (from backplane)
• Sensor Type: NAMUR
Mechanical
• Operating Temperature: -20 to +70°C (-4 to +158°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
DI40EX
E5
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
DI40EX
4
0-3
E-I
1
NAMUR
X
X
I/O
Ma
p
D
OC
Ind
iv
Dia idual
gno
stic
s
Data
Gro
u
Dia p
gno
stic
s
le
Sen
sor
Sty
Inp
u
C o ts per
nne
cto
r
Pin
out
nne
Co
Part Number
Inp
ut C
cto
oun
rs
t
Inputs
1
excom
E-I
I/O Data Map 1
Byte Bit 7
n–1
In
n
n+1
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
I-1
I-0
(Data from modules to the left)
Data from next discrete
modules
I-3
I-2
(Data from modules to the right)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
4 Channel
Discrete Output Module
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Selectable Output Power
Electrical
• Power Consumption: <4.5 W (from backplane)
• Output Voltage: 16 or 24 VDC (depending on terminals used)
Mechanical
• Operating Temperature: -20 to +60°C (-4 to +140°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
DO40EX
E7
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
DO40EX
4
0-3
E-O
1
X
X
I/O
Ma
p
Cu
rre
45 mA (@12 V)
Wi
re
De -Brea
tec
k
tion
Ind
iv
Dia idual
gno
stic
s
Data
nt
Ou
tp
C o uts p
n n e er
cto
r
Pin
out
cto
nne
Co
Part Number
Ou
tp
Co ut
unt
rs
Outputs
1
excom
E-O
Note: Each output can be used in either the 19 or 27 V mode
I/O Data Map 1
Byte Bit 7
Out
n–1
n
n+1
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
O-1
O-0
(Data for modules to the left)
Data for next discrete modules
O-3
O-2
(Data for modules to the right)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
8 Channel Discrete
Input/Output Module
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Channels can be Input or Output
Electrical
• Power Consumption: <2 W (from backplane)
• Input Type: NAMUR or dry contact
• Output Voltage: 8 VDC
Mechanical
• Operating Temperature: -20 to +60°C (-4 to +140°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
DM80EX
E9
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
DM80EX
8
0-3
E-X
2
NAMUR
X
X
8
0-3
E-X
2
~4 mA
Data
Ind
iv
Dia idual
gno
stic
s
Wi
reDe Brea
tec
k
tion
I/O
Ma
p
Ou
tp
C o uts p
n n e er
cto
r
Cu
rre
nt
Outputs
Gro
u
Dia p
gno
stic
s
Ind
ivid
Dia ual
gno
stic
s
Wi
reDe Brea
tec
k
tion
Ou
tp
Co ut
unt
Co
nne
cto
rs
Pin
out
le
Sty
sor
Sen
rs
Pin
out
Inp
u
C o ts per
nne
cto
r
cto
nne
Co
Part Number
Inp
ut C
oun
t
Inputs
X
X
1
excom
E-X
I/O Data Map 1
Byte Bit 7
In
Bit 6
n–1
n
n+1
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
I-1
I-0
(Data from modules to the left)
I-7
I-6
I-5
I-4
I-3
I-2
(Data from modules to the right)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
4 Channel Analog Input
Modules
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• HART Capability
Electrical
• Power Consumption: <3.5 W (from backplane)
• Input Type: 2-wire (AI(H)40EX) or 4-wire (AI(H)41EX) sensors
Mechanical
• Operating Temperature: -20 to +70°C (-4 to +158°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
AI40EX
AIH40EX
AI41EX
AIH41EX
E11
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
I/O
Ma
p
HA
R
Co T
mp
atib
le
Wi
re
De -Brea
tec
k
tion
Data
Ind
iv
Dia idual
gno
stic
s
le
Sen
sor
Sty
Inp
u
C o ts per
nne
cto
r
Pin
out
nne
Co
Part Number
Inp
ut C
cto
oun
rs
t
Inputs
AI40EX
4
0-3
E-AI2
1
0/4 to 20 mA
X
X
1
AI41EX
4
0-3
E-AI4
1
0/4 to 20 mA
X
X
1
AIH40EX
4
0-3
E-AI2
1
0/4 to 20 mA
X
X
X
1
AIH41EX
4
0-3
E-AI4
1
0/4 to 20 mA
X
X
X
1
E-AI4
excom
E-AI2
I/O Data Map 1
Byte Bit 7
In
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
n–1
(Data from modules to the left)
n
Channel 0, MSB
n+1
Channel 0, LSB
n+2
Channel 1, MSB
n+3
Channel 1, LSB
n+4
Channel 2, MSB
n+5
Channel 2, LSB
n+6
Channel 3, MSB
n+7
Channel 3, LSB
n+8
(Data from modules to the right)
Bit 1
Bit 0
Note: Default data map shown. More data is returned if HART variables
are used. Consult product user manual for details.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E12
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
4 Channel Analog Output
Modules
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• HART Capability
Electrical
• Power Consumption: <3.5 W (from backplane)
• Output Type: 0/4...20 mA actuators
Mechanical
• Operating Temperature: -20 to +70°C (-4 to +158°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
AO40EX
AOH40EX
E13
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
AO40EX
4
0-3
E-AO
1
0/4 to 20 mA
X
X
AOH40EX
4
0-3
E-AO
1
0/4 to 20 mA
X
X
I/O
Ma
p
HA
R
Co T
mp
atib
le
Wi
re
De -Brea
tec
k
tion
Data
Ind
iv
Dia idual
gno
stic
s
Cu
rre
nt
Ou
tp
C o uts p
n n e er
cto
r
Pin
out
cto
nne
Co
Part Number
Ou
tp
Co ut
unt
rs
Outputs
1
X
1
excom
E-AO
I/O Data Map 1
Byte Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
n–1
(Data for modules to the left)
n
Channel 0, MSB
n+1
Channel 0, LSB
n+2
Channel 1, MSB
Out n+3
n+4
Channel 1, LSB
n+5
Channel 2, LSB
n+6
Channel 3, MSB
Bit 1
Bit 0
Channel 2, MSB
n+7
Channel 3, LSB
n+8
(Data for modules to the right)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E14
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
8 Channel
Frequency/Counter Input
Module
• Modular I/O
• PROFIBUS-DP Compatible
• Pulse Count or Frequency
Measurement
• Hazardous Area Usage
Electrical
• Power Consumption: <1.5 W (from backplane)
• Input Type: Pulse count or frequency measurement of NAMUR sensor
Mechanical
• Operating Temperature: -20 to +60°C (-4 to +140°F)
• Protection: IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
• LEDs indicate faults for each channel
DF20EX
E15
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
DF20EX
2
0-3
E-F
2
X
X
I/O
Ma
p
Wi
re
De -Brea
tec
k
tion
sor
Sen
Frequency/
Counter
Ind
iv
Dia idual
gno
stic
s
Gro
u
Dia p
gno
stic
s
le
Data
Sty
Inp
u
C o ts per
nne
cto
r
Pin
out
nne
Co
Part Number
Inp
ut C
cto
oun
rs
t
Inputs
1
excom
E-F
I/O Data Map 1
Byte Bit 7
Bit 6
n–1
n
Bit 5
S-0
OV-0*
SIGN-0
n+1
In
Bit 4
Bit 3
Bit 0
Channel 0 (MS bits)
Channel 0
n+3
Channel 0 (LSB)
n+5
Bit 1
Channel 0
n+2
n+4
Bit 2
(Data from modules to the left)
S-1
OV-1*
SIGN-1
Channel 1 (MS bits)
Channel 1
n+6
Channel 1
n+7
Channel 1 (LSB)
n+8
(Data from modules to the right)
* OV is used in counter mode only
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E16
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
4 Channel Temperature
Input Module
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Thermocouple or RTD Inputs
Electrical
• Power Consumption: <3 W (from backplane)
• Input Type: PT100, PT1000, NI100 2-, 3- or 4-wire RTDs
Type B, E, J, K, L, N, R, S, T Thermocouples
Mechanical
• Operating Temperature: -20 to +70°C (-4 to +158°F)
• Protection:IEC IP 20
Diagnostics (Logical)
• I/O faults are mapped to the PROFIBUS-DP diagnostic area
• Open/short-circuit detection is configurable
Diagnostics (Physical)
TI40EX
E17
• LEDs indicate faults for each channel
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
TI40EX
4
0-3
E-T
1
TC / RTD
X
X
I/O
Ma
p
Wi
re
De -Brea
tec
k
tion
Ind
iv
Dia idual
gno
stic
s
Data
Gro
u
Dia p
gno
stic
s
le
Sen
sor
Sty
Inp
u
C o ts per
nne
cto
r
Pin
out
nne
Co
Part Number
Inp
ut C
cto
oun
rs
t
Inputs
1
excom
E-T
Note:
Each channel may be used in any of the four example forms shown.
I/O Data Map 1
Byte Bit 7
n–1
n
n+2
S-0
S-1
Bit 3
Bit 2
Bit 1
Bit 0
Channel 0, MSB
Channel 1, MSB
Channel 1, LSB
S-2
n+5
n+6
Bit 4
Channel 0, LSB
n+3
n+4
Bit 5
(Data from modules to the left)
n+1
In
Bit 6
Channel 2, MSB
Channel 2, LSB
S-3
Channel 3, MSB
n+7
Channel 3, LSB
n+8
(Data from modules to the right)
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E18
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
Backplane Racks
• Modular I/O
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Redundant Communication Option
Excom Racks
Part Number
I/O Slots
Redundancy
Connector Type
FM Approval
MT9/FM
8
Screw Terminal
X
MT9-R024
8
Screw Terminal
Pending
MT18-R024
16
Screw Terminal
Pending
X
MT9/FM
MT18-R024
E19
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
excom
MT18..
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E20
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
PSD24EX
• Power Supply Module (24 VDC in) for Excom Rack
Electrical
• Power Consumption: 75 W
• Power Output: 60 W
• Voltage Input: 18...33 VDC
Mechanical
• Operating Temperature: -20 to +60°C (-4 to +140°F)
• Protection: IEC IP50
Diagnostics (Physical)
• LEDs indicate status of power supply
BM1
E21
• Blank Cover for Unused excom Slots
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
Part Number
Description
D9T-RS485
D9 PROFIBUS-DP connector for use in safe areas.
D9T-RS485IS
D9 PROFIBUS-DP connector for use in hazardous (FM Div 2) areas.
D9T-RS485PG
D9 PROFIBUS-DP connector with programming port for use in safe areas
MODEX-FILTER
Capacitor to improve power up performance and operational safety of
excom
excom
Image
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E22
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
TURCK
Modular Industrial I/O System for Hazardous Areas
PROFIBUS-DP
IS Couplers
• Redundant Communication
• Hazardous Area Usage
• PROFIBUS-DP Compatible
• Fiber Optic or Copper Media
Electrical
• Voltage In: 18 to 32 VDC
• Current Consumption: <100 mA (OC11...), <200 mA (SC12...)
Mechanical
• Operating Temperature: -20 to +70°C (-4 to +158°F)
• Protection: IEC IP 20
Diagnostics (Physical)
• LEDs indicate status of power and PROFIBUS-DP communication
OC11EX/2G
OC11EX/3G
SC12-EX
SC12-EX shown
Note: For fiber optic communication the part number CABLE
LWL-2ST/SY-*M (where * is the length in meters) must be used.
E23
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial
Automation
Part Number
Classification
Connection
OC11EX/2G
Zone 1
Fiber
OC11EX/3G
Zone 2
Fiber
Copper
SC12-EX
Zone 1
excom
Note: For fiber-optic communication the part number CABLE LWL-2ST/SY-*M (where * is the length in meters) must be used.
Zone 2
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708
www.turck.com
E24
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement