CMP-300
The CMP-300 Composite Mixer Distribution
System
The solution for not enough inputs or outputs ...
The CMP-300 was developed by our engineers to solve the problem of not having enough inputs or
outputs for base band signals. Many stations are adding subcarriers and RBDS services and have
exciters without the proper number of inputs. The CMP-300 has three balanced or unbalanced inputs
that can easily mix composite stereo, subcarrier and/or RBDS Signals. The unit has a three output
distribution amplifier so that the mixed signals can be distributed to up to three exciters or STLs.
Each input is rear panel switchable for balanced or unbalanced operation. Each output is capable of
driving a 50 ohm load as far away as 100 feet from the unit because we incorporated a heavy duty
line driver in the design. The front panel has provision for level control of inputs and outputs giving
you complete flexibility.
BDI has been a leader in producing composite audio products for many years and the CMP-300 is
a third generation development that was designed to help broadcasters meet the demands of today’s
broadcasting environment while keeping budgets intact. Call us today for applications assistance or
call your favorite broadcast equipment dealer to order.
Broadcast Devices, Inc.
5 Crestview Avenue, Cortlandt Manor, NY 10567 Tel. (914) 737-5032 Fax (914) 736-6916
email: [email protected] Website: www.Broadcast-Devices.com
System Simplified Block Diagram
and Specifications
1
1
Baseband
Inputs
2
2
3
3
Three Input Composite Mixer
Three Output Composite Distribution
Amplifier
Technical Specifications
Inputs:
Outputs:
Maximum Output Level:
Frequency Response:
Total Harmonic Distortion:
Signal to Noise Ratio:
Power Requirements:
Physical Dimensions:
Environmental:
3-Balanced or unbalanced 10K input impedance
3- Unbalanced 50 ohm
10 V Peak to Peak into 50 Ohm load all outputs
+/- 0.1 dB from 20 Hz. to 100 KHz.
Less than 0.02 % @ 400 Hz.
80 dB or greater referenced to 3.5 V P to P Output
120/240 VAC @0.25A. 50-60 Hertz.
19” W X 10” D X 1.75”H Standard EIA 1 R.U.
0 - 60 degrees C. non condensing atmosphere
Broadcast Devices, Inc.
5 Crestview Avenue, Cortlandt Manor, NY 10567 Tel. (914) 737-5032 Fax (914) 736-6916
email: [email protected] Website: www.Broadcast-Devices.com
Authorized Distributor:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement