Pipe Clamps
Pipe Clamps
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide
range of pipe clamps are available for various applications.
Pipe Clamps
Materials
Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA-GREEN™, DURA-COPPER™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may
be supplied Electro-Plated, Copper Plated, or in Stainless Steel.
Recommended Torque (Pipe Clamp Hardware)
1/4”-20
5/16”-18
3/8”-16
1/2”-13
5/8”-11
6 ft/lbs (8 Nm)
11 ft/lbs (19 Nm)
19 ft/lbs (26 Nm)
50 ft/lbs (68 Nm)
65 ft/lbs (88 Nm)
3/4”-10
& larger
75 ft/lbs (101 Nm)
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal
Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel
items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. Select pipe O.D. from
charts on pages 294 thru 300.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
73
Pipe Hangers & Supports
Pipe Clamps
B3373 - Standard Riser Clamp (TOLCO Fig. 6)
B3373F - Felt Lined Standard Riser Clamp for Copper Tubing (TOLCO Fig. 6F)
B3373C - PVC Coated Standard Riser Clamp (TOLCO Fig. 6PVC)
Size Range: (B3373) 1/2" (15mm) thru 30" (760mm) pipe
(B3373F) 1/2" (15mm) thru 21/2" (65mm) copper tubing
(B3373C) 1/2" (15mm) thru 6" (150mm) pipe
Design Load
Material: Steel
Insulation Material: (Fig. 6F) 3/16" (4.8mm) felt.
Function: Used for supporting vertical piping.
Approvals: Underwriters Laboratories Listed in the USA (UL), Canada (cUL)
- 8" (200mm). Factory Mutual Engineering Approved, 3/4" (20mm) thru
8" (200mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 8,
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 8.
3/4" (20mm)
Bolt Size
Maximum Temperature: 650°F (343°C)
Finish: Plain. Contact B-Line for alternative finishes and materials.
L
Order By:
(B3373 and B3373C) pipe size and finish.
(B3373F) copper tube size and finish.
B3373F is available for Iron Pipe Size, consult factory.
B3373F
Pipe Size
in.
(mm)
L
in.
Design Load
Approx. Wt./100
(mm)
Bolt Size
Lbs.
(kN)
Lbs.
(kg)
B3373-1/2
1/2"
(15)
9"
(228.6)
3/8"-16 x 11/4"
255
(1.13)
101
(45.9)
B3373-3/4
3/4"
(20)
91/4"
(234.9)
3/8"-16 x 11/4"
255
(1.13)
105
(47.7)
B3373-1
1"
(25)
99/16"
(242.9)
3/8"-16 x 11/4"
255
(1.13)
109
(49.4)
B3373-11/4
11/4"
(32)
10"
(254.0)
3/8"-16 x 11/4"
255
(1.13)
112
(50.9)
B3373-11/2
11/2"
(40)
101/4"
(260.3)
3/8"-16 x 11/2"
255
(1.13)
113
(51.1)
2"
(50)
103/4"
(273.0)
3/8"-16 x 11/2"
255
(1.13)
165
(75.0)
(65)
111/4"
(285.7)
3/8"-16 x 11/2"
390
(1.73)
180
(81.6)
3"
(80)
1115/16"
(303.2)
3/8"-16 x 11/2"
530
(2.35)
195
(88.4)
31/2"
(90)
123/8"
(314.3)
1/2"-13 x 13/4"
670
(2.98)
217
(98.5)
(327.0)
1/2"-13 x 13/4"
810
(3.60)
228
(103.5)
(355.6)
1/2"-13 x 13/4"
1160
(5.16)
480
(217.7)
B3373-2
B3373-21/2
B3373-3
B3373-31/2
21/2"
B3373-4
4"
(100)
127/8"
B3373-5
5"
(125)
14"
(385.8)
1/2"-13 x 2"
1570
(6.98)
526
(238.6)
(450.8)
5/8"-11 x 21/2"
2500
(11.12)
957
(434.1)
2500
(11.12)
1101
(499.4)
2700
(12.01)
1622
(735.7)
B3373-6
6"
(150)
153/16"
B3373-8
8"
(200)
173/4"
(493.7)
5/8"-11 x 21/2"
(550.9)
5/8"-11 x 3"
B3373-10
10"
(250)
197/16"
B3373-12
12"
(300)
2111/16"
B3373-14
14"
(350)
239/16"
(598.5)
5/8"-11 x 3"
2700
(12.01)
1732
(785.6)
B3373-16
16"
(400)
263/8"
(669.9)
3/4"-10 x 31/4"
2900
(12.90)
2959
(1342.2)
B3373-18
18"
(450)
287/8"
(733.4)
3/4"-10 x 31/4"
2900
(12.90)
3235
(1467.4)
(784.2)
3/4"-10 x 31/2"
2900
(12.90)
3568
(1618.4)
(885.8)
3/4"-10 x 31/2"
2900
(12.90)
4064
(1843.3)
(1035.0)
7/8"-9 x 31/2"
2900
(12.90)
6016
(2728.8)
B3373-20
20"
(500)
307/8"
B3373-24
24"
(600)
347/8"
(750)
403/4"
B3373-30
30"
Notes: For ductile iron
(D.I.) pipe use part
number B3373DI-pipe
size. Contact B-Line
Engineering for more
information.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
74
Pipe Clamps
B3373C
Part No.
Bolts and Nuts Included
Pipe Clamps
B3373CT - Cooper Tubing Riser Clamp (TOLCO Fig. 82)
B3373CTC - PVC Coated Cooper Tubing Riser Clamp (TOLCO Fig. 82PVC)
Size Range: — Size 1/2" (15mm) thru 6" (150mm) copper tubing
Design Load
Material: — Steel
Function: — Used for supporting vertical copper tubing.
Approvals: — Conforms to Federal Specification WW-H-171E &
A-A-1192A Type 8 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58 Type 8.
Finish: — DURA-COPPER™
Note: — Available with plastic coating, specify by ordering B3373CTC
Order By: — Part number and nominal tubing size
Bolt Size
L
Bolts and Nuts Included
B3373CTC
B3373CT
Tubing Size
Part No.
L
Design Load
Approx. Wt./100
Pipe Clamps
in.
(mm)
in.
(mm)
Bolt Size
Lbs.
(kN)
Lbs.
(kg)
B3373CT-1/2
1/2"
(15)
83/4"
(222.2)
5/16"-18 x 1"
75
(.33)
72
(32.6)
B3373CT-3/4
3/4"
(20)
91/16"
(234.9)
5/16"-18 x 1"
75
(.33)
73
(33.2)
74
(33.6)
(25)
95/16"
(236.5)
3/8"-16 x 1"
120
(.53)
B3373CT-11/4
11/4"
(32)
95/8"
(244.5)
3/8"-16 x 1"
150
(.67)
77
(34.8)
B3373CT-11/2
11/2"
(40)
93/4"
(247.6)
3/8"-16 x 11/4"
150
(.67)
111
(50.3)
2"
(50)
107/16"
(265.1)
3/8"-16 x 11/4"
150
(.67)
120
(54.5)
21/2"
(65)
1015/16"
(277.8)
3/8"-16 x 11/4"
300
(1.33)
128
(58.1)
(80)
117/16"
(290.5)
3/8"-16 x 11/4"
300
(1.33)
136
(61.5)
(90)
1115/16"
(303.2)
3/8"-16 x 11/4"
300
(1.33)
145
(65.7)
(100)
121/2"
(317.5)
1/2"-13
300
(1.33)
170
(77.3)
(125)
135/8"
(150)
145/8"
B3373CT-1
B3373CT-2
B3373CT-21/2
B3373CT-3
B3373CT-31/2
B3373CT-4
B3373CT-5
B3373CT-6
1"
3"
31/2"
4"
5"
6"
x 13/4"
(346.1)
1/2"-13
x 2"
500
(2.22)
355
(161.0)
(371.5)
1/2"-13
x 2"
500
(2.22)
386
(175.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
75
Pipe Hangers & Supports
Pipe Clamps
B3132 - Two-Bolt Underground Clamp (TOLCO Fig. 9)
Size Range: 4" (100mm) thru 24" (600mm) pipe
Steel Size
Material: Steel
Function: Clamp is used for underground A.W.W.A. cast iron and
ductile iron water pipe to prevent joints from separating. The O.D. of
the A.W.W.A. pipe is shown in the data table.
Bolt Size
A
Finish: Plain. Contact B-Line for alternative finishes and materials.
B
Order By: Part number, pipe size and outside diameter of pipe.
Order B3132W lugs, tie rods and hex nuts separately.
in.
A
(mm)
in.
B
Clamp I.D.
(mm)
in.
(mm)
(327.0)
93/4"
(247.6)
(374.6)
12"
(304.8)
in.
Steel Size
Approx. Wt./100
(mm)
Bolt Size
Lbs.
(kg)
(127.0)
1/2" x 2"
(12.7 x 50.8)
5/8"-11 x 3"
864
(391.9)
(179.4)
1/2" x 2"
(12.7 x 50.8)
5/8"-11 x 3"
1020
(462.6)
(mm)
in.
5"
71/16"
B3132-4
4"
(100)
127/8"
B3132-6
6"
(150)
143/4"
(200)
171/4"
(438.1)
141/4"
(361.9)
93/16"
(233.4)
1/2" x 2"
(12.7 x 50.8)
5/8"-11 x 3"
1222
(554.3)
(492.1)
161/2"
(419.1)
113/8"
(288.9)
1/2" x 2"
(12.7 x 50.8)
5/8"-11 x 3"
1409
(639.1)
(555.6)
187/8"
(479.4)
131/2"
(342.9)
1/2" x 2"
(12.7 x 50.8)
5/8"-11 x 3"
1608
(729.4)
(565.1)
153/4"
(400.0)
3/4" x 3"
(19.0 x 76.2)
7/8"-9 x 41/2"
4359
(1977.2)
(625.5)
177/8"
(454.0)
3/4" x 4"
(19.0 x 101.6)
1"-8 x 41/2"
6403
(2904.4)
(19.0 x 101.6)
11/4"-7 x 5"
7293
(3308.1)
(19.0 x 114.3)
11/4"-7 x 5"
8778
(3981.7)
(19.0 x 127.0)
11/4"-6 x 51/2"
11659
(5288.5)
B3132-8
8"
B3132-10
10"
(250)
193/8"
B3132-12
12"
(300)
217/8"
B3132-14
14"
(350)
26"
(660.4)
221/4"
B3132-16
16"
(400)
283/8"
(720.7)
245/8"
(796.9)
275/8"
(701.7)
20"
(508.0)
3/4" x 4"
(850.9)
293/4"
(755.6)
221/8"
(562.0)
3/4" x 41/2"
(990.6)
351/4"
(895.3)
263/8"
(669.9)
3/4" x 5"
B3132-18
18"
(450)
313/8"
B3132-20
20"
(500)
331/2"
B3132-24
24"
(600)
39"
B3132W - Lug Washer (TOLCO Fig. 9X)
Size Range:
3/4" (20mm)
thru
11/2" (40mm)
D Dia.
rod
Material: Cast Iron for B3132W-3/4, steel for other sizes
Function: Used with B3132 to secure tie rods. The projecting
lug bears against the clamp bolt to prevent washer and tie rod
from slipping off clamp.
Finish: Plain. Contact B-Line for alternative finishes and
materials.
Order By: Part number, rod size and finish
Part No.
Tie Rod
Size
B3132W-3/4
3/4"-10
B3132W-1
1"-8
Use With Pipe Size
in.
F
H
in.
4"-12"
14"-16"
E
in.
(100-300)
7/8"
(22.2)
23/8"
(60.3)
(350-400)
11/8"
(28.6)
31/2"
(88.9)
(450)
13/8"
(34.9)
31/2"
(38.1)
(41.3)
B3132W-11/4
11/4"-7
B3132W-13/8
13/8"-6
20"
(500)
11/2"
B3132W-11/2
11/2"-6
24"
(600)
15/8"
B3132W-1
thru 11/2
F
(mm)
(mm)
H
G
B3132W-3/4
Dia.
(mm)
18"
D Dia.
E
E
in.
G
(mm)
in.
-31/2"
G
H
Approx. Wt./100
(mm)
in.
(mm)
--
5/8"
(15.9)
15/8"
Lbs.
(kg)
(88.9)
5/8"
(15.9)
21/2"
(41.3)
74
(33.7)
(63.5)
207
(93.9)
(63.5)
236
(107.0)
(88.9)
4"
(101.6)
5/8"
(15.9)
31/2"
4"
(101.6)
41/4"
(107.9)
5/8"
(15.9)
4"
(101.6)
231
(104.8)
4"
(101.6)
43/4"
(120.6)
5/8"
(15.9)
4"
(101.6)
259
(117.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
76
Pipe Clamps
Pipe Size
Part No.
Bolts and Nuts Included
Pipe Clamps
B3134 - Double Bolt Underground Socket Clamp (TOLCO Fig. 14)
Size Range: 4" (100mm) thru 24" (600mm) pipe
Material: Steel
A
Function: Clamp is used for underground A.W.W.A. cast iron and
ductile iron water pipe to prevent joints from separating. The O.D. of the
A.W.W.A. pipe is shown in the data table.
Approvals: Conforms to National Fire Protection Association (NFPA)
Pamphlet 24, 4" (100mm) thru 12" (300mm) pipe sizes.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, pipe size and
outside diameter of pipe.
B
Order B3134W plate washers, tie rods
and hex nuts separately.
Part
No.
Pipe Size
in.
B3134-4
B3134-6
B3134-8
B3134-10
B3134-12
B3134-14
B3134-16
B3134-18
B3134-20
B3134-24
4.80"
6.90"
9.05"
11.10"
13.20"
15.30"
17.40"
19.50"
21.60"
25.80"
A
(mm)
in.
B
Bolt
Size
B3134 Washer Size)
(mm)
(236.5)
5/8"-11
B3134W-3/4
(417.5) 1111/16" (298.9)
5/8"-11
(498.5) 147/8"
(442.6)
5/8"-11
(554.0) 171/16" (433.4)
3/4"-10
191/4"
B3134W-3/4
B3134W-3/4
B3134W-3/4
B3134W-1
B3134W-1
B3134W-11/8
B3134W-11/4
B3134W-11/2
B3134W-11/2
(mm)
in.
(121.9)
141/16"
(357.2)
95/16"
(175.3)
167/16"
195/8"
2113/16"
241/2"
2615/16"
303/4"
345/16"
365/8"
421/8"
(229.9)
(281.9)
(335.3)
(388.6)
(441.9)
(495.3)
(548.6)
(655.3)
(488.9)
7/8"-9
(684.2) 2111/16" (550.9)
7/8"-9
(781.0) 243/4"
1"-8
11/4"-7
11/4"-7
11/2"-6
(622.3)
(628.6)
(871.5) 275/16" (693.7)
295/8"
(752.5)
(1070.0) 343/8"
(873.1)
(930.3)
Approx. Wt./100
lbs.
(kg)
1275
1455
2350
2925
4030
5385
7645
9425
10975
14865
(578.3)
(660.0)
(1065.9)
(1326.8)
(1828.0)
(2442.6)
(3467.8)
(4275.2)
(4978.2)
(6742.6)
B3134W - Plate Washer (TOLCO Fig. 14X)
Pipe Clamps
Size Range: 3/4"-10 thru 11/2"-6 rod
C
Material: Steel
B
Function: Used with B3134 to secure tie rods.
Finish: Plain. Contact B-Line for alternative finishes and materials.
A
A
Order By: Part number, rod size and finish
Tie Rod
Size
Part
No.
B3134W-3/4
B3134W-1
B3134W-11/8
B3134W-11/4
B3134W-11/2
3/4"-10
1"-8
11/8"-7
11/4"-7
11/2"-6
A
Hole Size
C
B
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
lbs.
(kg)
3"
1
3 /2"
31/2"
31/2"
31/2"
(76.2)
1/2"
(12.7)
7/8"
(22.2)
(54.4)
(88.9)
1/2"
(12.7)
(88.9)
3/4"
(88.9)
3/4"
11/8"
(15.9) 11/4"
(19.0) 13/8"
(19.0) 15/8"
(28.6)
(88.9)
5/8"
120
157
194
230
240
(31.7)
(35.8)
(41.2)
(71.2)
(88.0)
(104.3)
(108.8˛)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
77
Pipe Hangers & Supports
Pipe Clamps
Fig. 4A - Pipe Clamp for Sway Bracing
Component of State of
California OSHPD Approved
Seismic Restraints System
Size Range: 4" (100mm) thru 8" (200mm) pipe.
For sizes smaller than 4" (100mm) use B3140.
Material: Steel
B
Function: For bracing pipe against sway and seismic disturbance.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) 4" (100mm) thru 8" (200mm). Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide Health Planning and
Development (OSHPD).
A
Installation Instructions: The Fig. 4A is the "braced pipe" attachment
component of a longitudinal, lateral or riser brace assembly. It is intended to
be combined with the "bracing pipe" and B-Line/TOLCO transitional and
structural attachment component(s) to form a complete bracing assembly.
NFPA 13 and/or OSHPD guidelines should be followed.
D
To Install: Place the Fig. 4A over the pipe to be braced. Attach Cooper
B-Line/TOLCO transitional fitting, either Fig. 980, 910 or 909, to the clamp
ears. Tighten bolts and nuts; torque requirement is a minimum of 50 ft./lbs.
(68Nm).
Transitional fitting attachment can pivot for adjustment to proper brace angle.
C
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, pipe size and finish
Fig. 4A - Longitudinal
Brace
Part
No.
Pipe
Size
in.
A
(mm)
in.
4A-4
4"
(100)
81/2"
4A-5
5"
(125)
93/4"
B
(mm)
in.
C
(mm)
in.
(215.9)
9/16"
(247.6)
9/16"
(15.9)
4A-6
6"
(150)
111/2"
(292.1)
5/8"
4A-8
8"
(200)
131/4" (336.5)
3/4"
D
(mm)
Bolt
Size
(85.7)
311/16"
(98.4)
43/8"
(mm)
in.
(14.3)
33/8"
(14.3)
37/8"
Max. Horizontal
Design Load
Pipe Clamps
Fig. 4A Lateral Brace
(UL Listed Up to 4” (100MM) IPS)
Approx.
Wt./100
lbs.
(kN)
lbs.
(kg)
(93.7)
1/2"-13
2015
(8.96)
221
(100.2)
(111.1)
1/2"-13
2015
(8.96)
253
(114.7)
(127.0)
51/8"
(130.2)
1/2"-13
2015
(8.96)
513
(232.7)
(19.0) 611/16" (169.9)
61/8"
(155.6)
1/2"-13
2015
(8.96)
601
(272.6)
5"
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
78
Pipe Clamps
B3140 - Standard Pipe Clamp (TOLCO Fig. 4)
B3140F - Standard Pipe Clamp Felt Lined for Copper Tubing (TOLCO Fig. 4F)
B3140C - Standard Pipe Clamp PVC Coated (TOLCO Fig. 4PVC)
Size Range: B3140/B3140C Size 1/2" (15mm) thru 30" (750mm) pipe.
B3140F Size 1/2" (15mm) thru 21/2" (65mm) copper tubing
Material: Steel
Function: Recommended for the suspension of non-insulated pipe
or insulated pipe with B3151 shields. (Use B3200 weldless eye nut,
B3210 eye rod or B3211 welded eye rod.) B3140F and B3140C are
designed to reduce noise and vibration and/or prevent electrolysis.
Approvals: Underwriters Laboratories Listed in the USA (UL), Canada
(cUL) 3/4" (20mm) - 12" (300mm), and approved by Factory Mutual
Engineering (FM), 3/4" (20mm) - 8" (200mm). Federal Specification
WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 4. Included in our Seismic
Restraints Catalog approved by the State of California Office of
Statewide Health Planning and Development (OSHPD). For additional
load, spacing and placement information relating to OSHPD projects,
please refer to the Seismic Restraint Systems Guidelines.
Note: For piping that requires sway bracing refer to Fig. 4A.
Maximum Temperature: — 750°F (399°C)
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, pipe size and finish.
Order Note: When ordering B3140F allow for 3/16" (4.8mm) felt on
each half of clamp.
Component of State of
California OSHPD Approved
Seismic Restraints System
Bolt Size
B
C
B
C
A
Pipe Clamps
B3140
B3140F
B3140C
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
79
Pipe Hangers & Supports
Pipe Clamps
B3140 - Standard Pipe Clamp (TOLCO Fig. 4)
B3140F - Standard Pipe Clamp Felt Lined (TOLCO Fig. 4F)
B3140C - Standard Pipe Clamp PVC Coated (TOLCO Fig. 4PVC) Cont.
B3140-1/2
B3140-3/4
B3140-1
B3140-11/4
B3140-11/2
B3140-2
B3140-21/2
B3140-3
B3140-31/2
B3140-4
B3140-5
B3140-6
B3140-8
B3140-10
B3140-12
B3140-14
B3140-16
B3140-18
B3140-20
B3140-24
B3140-30
Part
No.
B3140-1/2
B3140-3/4
B3140-1
B3140-11/4
B3140-11/2
B3140-2
B3140-21/2
B3140-3
B3140-31/2
B3140-4
B3140-5
B3140-6
B3140-8
B3140-10
B3140-12
B3140-14
B3140-16
B3140-18
B3140-20
B3140-24
B3140-30
Pipe
Size
A
in.
(mm)
1/2"
B
C
(mm)
in.
(mm)
in.
(mm)
(24.6)
117/32"
121/32"
17/8"
2"
7
2 /32"
23/4"
39/32"
39/16"
325/32"
45/16"
47/8"
513/16"
615/16"
811/16"
93/4"
105/8"
115/8"
131/4"
141/8"
167/8"
21"
(38.9)
5/16"-18
(42.0)
5/16"-18
(47.6)
5/16"-18
(50.8)
5/16"-18
(56.4)
5/16"-18
(69.8)
1/2"-13
(83.3)
1/2"-13
(90.5)
1/2"-13
(96.0)
1/2"-13
(109.5)
5/8"-11
(123.8)
5/8"-11
(147.6)
3/4"-10
(176.2)
3/4"-10
(220.7)
7/8"-9
(247.6)
7/8"-9
(269.9)
7/8"-9
(295.3)
7/8"-9
(336.5)
1"-8
11/8"-7
11/4"-7
11/2"-6
(15)
3/8"
(9.5)
31/32"
3/4"
(20)
9/16"
(14.3)
13/32"
(27.8)
1"
11/4"
11/2"
2"
21/2"
3"
1
3 /2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
(25)
9/16"
(14.3)
(33.3)
(32)
17/32"
(13.5)
(40)
19/32"
(15.1)
(50)
9/16"
(14.3)
(65)
5/8"
(15.9)
(75)
5/8"
(15.9)
(90)
5/8"
(15.9)
(100)
3/4"
(19.0)
(125)
3/4"
(19.0)
(150)
7/8"
(22.2)
(200)
1"
1"
1"
11/8"
11/8"
11/4"
13/8"
15/8"
21/4"
(25.4)
15/16"
17/16"
121/32"
21/8"
221/32"
215/16"
35/32"
39/16"
41/8"
415/16"
61/16"
73/8"
87/16"
91/4"
101/4"
117/8"
123/4"
151/4"
185/8"
(250)
(300)
(350)
(400)
(450)
(500)
(600)
(750)
Pipe
Size
(25.4)
(25.4)
(28.6)
(28.6)
(31.7)
(34.9)
(41.3)
(57.1)
(36.5)
(42.0)
(54.0)
(67.5)
(74.6)
(80.1)
(90.5)
(104.8)
(125.4)
(154.0)
(187.3)
(214.3)
(234.9)
(260.3)
(301.6)
(323.8)
(387.3)
(473.1)
Max. Design Load
650°F (343°C)
750°F (399°C)
(358.8)
(428.6)
(533.4)
Approx.
Wt./100
in.
(mm)
lbs.
(kN)
lbs.
(kN)
lbs.
(kg)
1/2"
(15)
(25)
30
31
33
39
41
118
130
150
158
239
272
541
642
1366
1543
2077
2289
3206
3616
5161
10460
(13.6)
1"
11/4"
11/2"
2"
1
2 /2"
3"
31/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
390
390
390
390
620
810
810
810
810
810
810
1260
1260
1950
1950
1950
1950
2390
2390
2390
2740
(1.73)
(20)
500
500
500
500
800
1040
1040
1040
1040
1040
1040
1615
1615
2490
2490
2490
2490
3060
3060
3060
3500
(2.22)
3/4"
(32)
(40)
(50)
(65)
(75)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
(500)
(600)
(750)
Bolt
Size
in.
(2.22)
(2.22)
(2.22)
(3.56)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(7.18)
(7.18)
(11.07)
(11.07)
(11.07)
(11.07)
(13.61)
(13.61)
(13.61)
(15.57)
(1.73)
(1.73)
(1.73)
(2.76)
(3.60)
(3.60)
(3.60)
(3.60)
(3.60)
(3.60)
(5.60)
(5.60)
(8.67)
(8.67)
(8.67)
(8.67)
(10.63)
(10.63)
(10.63)
(12.14)
(14.0)
(14.5)
(17.7)
(18.6)
(53.5)
(58.9)
(68.0)
(71.6)
(108.4)
(123.4)
(245.4)
(291.2)
(619.6)
(699.9)
(942.1)
(1038.3)
(1454.2)
(1640.2)
(2341.0)
(4744.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
80
Pipe Clamps
Part
No.
Pipe Clamps
B3141 - A.W.W.A. Pipe Clamp (TOLCO Fig. 4CI)
Size Range: 4" (100mm) thru 24" (600mm) pipe
A
Material: Steel
Function: Recommended for the suspension of flanged or bell and spigot
A.W.W.A. cast iron or ductile iron pipe. The O.D. of the A.W.W.A. iron pipe is
shown in the data table. Used with B3200 weldless eye nut, B3210 eye rod
or B3211 welded eye rod.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 4.
B
Maximum Temperature: 650°F (343°C)
Finish: Plain
Note: Available in Electro-Galvanized and HDG finish or Stainless
Steel materials.
B
Order By: Part number, pipe size and finish
Pipe Clamps
Part
No.
Pipe
O.D.
in.
A
(mm)
in.
B
(mm)
in.
11/8"
(28.6)
41/16"
(28.6)
(mm)
Bolt
Size
Max. Recommended
Design Load
lbs.
(kN)
(103.2)
5/8"-11
1400
51/16" (128.6)
5/8"-11
1400
(157.2)
5/8"-11
(184.1)
5/8"-11
Approx.
Wt./100
lbs.
(kg)
(6.23)
860
(390.1)
(6.23)
1060
(480.8)
1400
(6.23)
1230
(557.9)
1400
(6.23)
1430
(648.6)
B3141-4
4.80"
(121.9)
B3141-6
6.90"
(175.2) 11/8"
B3141-8
9.05"
11/8"
(28.6)
63/16"
B3141-10
11.10" (281.9) 11/8"
(28.6)
71/4"
B3141-12
13.20” (335.3)
11/8"
(28.6)
85/16"
(211.1)
5/8"-11
1400
(6.23)
1630
(739.3)
B3141-14
15.30" (388.6) 13/4"
(44.4)
97/8"
(250.7)
3/4"-10
2000
(8.89)
2300
(1043.3)
B3141-16
17.40" (441.9) 13/4"
(44.4)
115/16" (287.3)
7/8"-9
2500
(11.12)
3725
(1689.6)
B3141-18
19.50" (495.3)
17/8"
(47.6)
129/16" (319.1)
1"-8
3000
(13.34)
4200
(1905.1)
B3141-20
21.60" (548.6)
2"
(50.8)
135/8" (346.1)
1"-8
3100
(13.79)
4575
(2075.2)
(50.8)
165/16" (414.3)
1/4"-7
4500
(20.01)
6400
(2903.0)
B3141-24
(229.9)
25.80" (655.3)
2"
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
81
Pipe Hangers & Supports
Pipe Clamps
B3142 - Heavy Duty Pipe Clamp (TOLCO Fig. 4H)
Size Range: 3" (80mm) thru 24" (600mm) pipe
A
Material: Steel
Function: Recommended for the suspension of heavy-duty pipe lines.
(Use with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod).
C
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 4.
Maximum Temperature: 750°F (399°C)
Finish: Plain. Contact B-Line for alterantive finishes and materials.
B
Order By: Part number, pipe size and finish
B
Pipe
Size
A
B
C
Bolt
Max. Design Load
650°F (343°C)
750°F (399°C)
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
Size
lbs.
(kN)
lbs.
(kN)
lbs.
(kg)
B3142-3
3"
(80)
1"
(25.4)
3"
(76.2)
41/8"
(104.8)
3/4"-10
3370
(14.99)
3005
(13.36)
498
(225.9)
B3142-4
4"
(100)
1"
(25.4) 311/16" (93.7)
B3142-5
5"
(125)
1"
415/16" (125.4)
7/8"-9
3515
(15.63)
3135
(13.94)
634
(287.6)
(25.4)
45/16" (109.5) 59/16" (141.3)
7/8"-9
3515
(15.63)
3135
(13.94)
714
(323.9)
(28.6)
53/16"
(131.8) 611/16" (169.9)
1"-8
4865
(21.64)
4340
(19.30)
1351
(612.8)
(28.6)
61/4"
(158.7)
73/4"
(196.8)
1"-8
4865
(21.64)
4340
(19.30)
1573
(713.5)
(200.0)
91/2"
B3142-6
6"
(150)
11/8"
B3142-8
8"
(200)
11/8"
(31.7)
77/8"
(241.3)
11/4"-7
6010
(26.73)
5360
(23.84)
2537
(1150.8)
(41.3)
91/2"
(241.3) 115/8" (295.3)
11/2"-6
8675
(38.58)
7740
(34.43)
4300
(1950.5)
101/8"
121/4"
B3142-10
10"
(250)
11/4"
B3142-12
12"
(300)
15/8"
(41.3)
(311.1)
11/2"-6
9120
(40.56)
8135
(36.18)
5228
(2371.4)
(41.3) 113/16" (284.2) 135/16" (338.1)
11/2"-6
9120
(40.56)
8135
(36.18)
5657
(2566.0)
B3142-14
14"
(350)
15/8"
B3142-16
16"
(400)
15/8"
(41.3)
145/16" (363.5)
11/2"-6
9150
(40.70)
8160
(36.29)
6914
(3136.2)
(41.3) 135/16" (338.1) 157/16" (392.1)
11/2"-6
9150
(40.70)
8160
(36.29)
7468
(3387.5)
11/2"-6
9200
(40.92)
8205
(36.49)
12629 (5728.5)
B3142-18
18"
(450)
15/8"
B3142-20
20"
(500)
15/8"
(600)
13/4"
B3142-24
24"
(44.4)
(257.2)
123/16" (309.6)
153/8"
(390.5)
173/4"
(450.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
82
Pipe Clamps
Part
No.
Pipe Clamps
Component of State of
California OSHPD Approved
Seismic Restraints System
B3144 - Standard Double Bolt Pipe Clamp (TOLCO Fig. 5)
Size Range: — 1/2" (15mm) thru 36" (900mm) pipe.
Material: — Steel
A
Function: — Recommended for the suspension of pipe requiring up to
4" (101.6mm) of insulation and where flexibility of the clamp may be
necessary. Use B3200 weldless eye nut, B3210 eye rod or B3211
welded eye rod. Also recommended for the attachment of sway bracing
up to 8" (203.2mm). Refer to Cooper B-Line/TOLCO State of California
Approved Seismic Restraint Product Manual.
Spacer
Approvals: — Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 3 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 3. Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health
Planning and Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please refer to the
B-Line/TOLCO Seismic Restraint Systems Guidelines.
B
C
Maximum Temperature: 750°F (399°C)
E
Finish: Plain. Contact B-Line for alternative finishes and materials.
D
Order By: Part number, pipe size and finish.
Pipe
Size
Part
No.
Pipe Clamps
B3144-1/2
B3144-3/4
B3144-1
B3144-11/4
B3144-11/2
B3144-2
B3144-21/2
B3144-3
B3144-31/2
B3144-4
B3144-5
B3144-6
B3144-8
B3144-10
B3144-12
B3144-14
B3144-16
B3144-18
B3144-20
B3144-24
B3144-30
B3144-36
A
B
C
D
E
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
1/2"
(15)
3/8"
(9.5)
(71.4)
7/8"
(22.2)
5/8"
(15.9)
(42.9)
(15.9)
(32)
5/8"
(15.9)
(40)
1"
1"
1"
1"
1"
1"
1"
11/2"
11/2"
11/2"
11/2"
2"
2"
2"
2"
2"
21/2"
21/2"
(25.4)
11/16"
15/16"
19/16"
13/4"
21/16"
23/8"
211/16"
3"
9
3 /16"
43/16"
43/4"
515/16"
75/16"
87/16"
99/16"
109/16"
115/8"
131/4"
155/16"
19"
221/8"
(27.0)
(25)
5/8"
11/2"
111/16"
115/16"
23/16"
25/8"
215/16"
31/4"
35/8"
37/8"
411/16"
55/16"
61/8"
75/16"
87/8"
915/16"
115/16"
125/16"
133/8"
151/8"
175/16"
22"
255/8"
(38.1)
(20)
23/16"
23/8"
25/8"
27/8"
41/2"
415/16"
51/4"
57/8"
65/16"
65/8"
77/16"
81/2"
95/8"
101/2"
115/8"
129/16"
1313/16"
151/8"
163/8"
187/16"
23"
287/8"
(55.6)
3/4"
213/16"
3"
31/4"
31/2"
53/8"
513/16"
61/8"
63/4"
73/16"
73/4"
89/16"
97/8"
11"
12"
131/8"
145/16"
159/16"
167/8"
181/4"
207/16"
26"
323/8"
1"
11/4"
11/2"
2"
21/2"
3"
31/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
(50)
(65)
(75)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
(500)
(600)
(750)
(900)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(38.1)
(38.1)
(38.1)
(38.1)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(63.5)
(63.5)
(76.2)
(82.5)
(88.9)
(136.5)
(147.6)
(155.6)
(171.4)
(182.6)
(196.8)
(217.5)
(250.8)
(279.4)
(304.8)
(333.4)
(363.5)
(395.3)
(428.6)
(463.5)
(519.7)
(660.4)
(822.2)
(60.2)
(66.7)
(72.9)
(114.3)
(125.4)
(133.3)
(149.2)
(160.3)
(168.3)
(189.5)
(215.9)
(244.5)
(266.7)
(295.3)
(319.1)
(350.8)
(384.2)
(415.9)
(468.3)
(584.2)
(733.4)
(49.2)
(58.7)
(66.7)
(74.6)
(82.5)
(92.1)
(98.4)
(119.1)
(134.9)
(155.6)
(185.7)
(225.4)
(252.4)
(287.3)
(312.7)
(339.7)
(384.2)
(439.7)
(558.8)
(650.9)
(33.3)
(39.7)
(44.4)
(52.4)
(60.3)
(68.3)
(76.2)
(90.5)
(106.4)
(120.6)
(150.8)
(185.7)
(214.3)
(242.9)
(268.3)
(295.3)
(336.5)
(388.9)
(482.6)
(562.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
83
Pipe Hangers & Supports
Pipe Clamps
B3144 - Standard Double Bolt Pipe Clamp (TOLCO Fig. 5) cont.
Component of State of
California OSHPD Approved
Seismic Restraints System
A
Spacer
B
C
E
D
Pipe
Size
in.
(mm)
Bolt Size
Size
B3144-1/2
1/2"
(15)
3/8"-16
B3144-3/4
B3144-1
B3144-11/4
B3144-11/2
B3144-2
B3144-21/2
B3144-3
B3144-31/2
B3144-4
B3144-5
B3144-6
B3144-8
B3144-10
B3144-12
B3144-14
B3144-16
B3144-18
B3144-20
B3144-24
B3144-30
B3144-36
3/4"
(20)
3/8"-16
(25)
3/8"-16
(32)
3/8"-16
(40)
5/8"-11
(50)
5/8"-11
(65)
5/8"-11
(75)
5/8"-11
(90)
5/8"-11
(100)
3/4"-10
(125)
3/4"-10
(150)
7/8"-9
(200)
7/8"-9
(250)
1"-8
1"-8
11/4"-7
11/4"-7
11/4"-7
13/8"-6
13/8"-6
13/8"-6
13/4"-5
1"
11/4"
11/2"
2"
1
2 /2"
3"
31/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
(300)
(350)
(400)
(450)
(500)
(600)
(750)
(900)
Max. Design Load
650°F (343°C)
750°F (399°C)
Approx.
Wt./100
lbs.
(kN)
lbs.
(kN)
lbs.
(kg)
950
950
950
950
1545
1545
1545
1545
1545
2500
2500
2865
2865
3240
3240
4300
4300
4300
5490
4500
7500
10500
(4.22)
----1380
1380
1380
1380
1380
2230
2230
2555
2555
2890
2890
3835
3835
3835
4900
4015
---
(--)
73
73
77
79
236
251
274
289
315
745
828
1261
1535
2173
2404
4002
4362
4935
6570
7524
19502
23488
(33.1)
(4.22)
(4.22)
(4.22)
(6.87)
(6.87)
(6.87)
(6.87)
(6.87)
(11.12)
(11.12)
(12.74)
(12.74)
(14.41)
(14.41)
(19.12)
(19.12)
(19.12)
(24.42)
(20.01)
(33.36)
(46.70)
(--)
(--)
(--)
(6.14)
(6.14)
(6.14)
(6.14)
(6.14)
(9.92)
(9.92)
(11.36)
(11.36)
(12.85)
(12.85)
(17.06)
(17.06)
(17.06)
(21.79)
(17.86)
(--)
(--)
(33.1)
(34.9)
(35.8)
(107.0)
(113.8)
(124.3)
(131.1)
(142.9)
(337.9)
(375.6)
(572.0)
(696.3)
(985.7)
(1090.4)
(1815.3)
(1978.6)
(2238.5)
(2980.1)
(3412.9)
(8846.1)
(10654.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
84
Pipe Clamps
Part
No.
Pipe Clamps
A
B3146 - Heavy Duty Double Bolt Pipe Clamp (TOLCO Fig. 5H)
Size Range: 6" (150mm) thru 36" (900mm) pipe.
Material: Steel
Function: Recommended for the suspension of heavy
duty high temperature pipe runs requiring up to 4" (101.6mm) of
insulation and where flexibility of the clamp may be
necessary. Use with B3200 weldless eye nut, B3210 eye rod or
B3211 welded eye rod.
C
Approvals: Conforms to Federal Specification
WW-H-171E & A-A-1192A, Type 3 and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58, Type 3.
B
Maximum Temperature: 750°F (399°C)
Finish: Plain. Contact B-Line for alternative finishes and
materials.
E
Order By: Part number, pipe size and finish.
D
Pipe Size
Part No.
in.
A
(mm)
in.
B
(mm)
in.
C
D
(mm)
in.
(mm)
(44.4)
103/16"
(258.8)
815/16"
(227.0)
(50.8)
113/8"
(288.9)
101/8"
(257.2)
in.
E
(mm)
in.
(mm)
6"
(152.4)
43/4"
(120.6)
71/4"
(184.1)
6"
(152.4)
(184.1)
B3146-6
6"
(150)
13/4"
B3146-8
8"
(200)
2"
(350)
21/4"
(57.1)
131/8"
(333.4)
113/8"
(288.9)
9"
(228.6)
71/4"
(63.5)
145/16"
(363.5)
129/16"
(319.1)
103/8"
(263.5)
85/8"
(219.1)
(63.5)
151/2"
(393.7)
131/2"
(342.9)
115/8"
(295.3)
95/8"
(244.5)
(435.0)
147/8"
(377.7)
131/8"
(333.4)
107/8"
(276.2)
(463.5)
161/4"
(412.7)
141/2"
(368.3)
121/2"
(317.5)
(342.9)
B3146-10
10"
B3146-12
12"
(300)
21/2"
B3146-14
14"
(450)
21/2"
B3146-16
16"
(400)
3"
(76.2)
171/8"
B3146-18
18"
(550)
31/2"
(88.9)
181/4"
(500)
31/2"
(88.9)
193/4"
(501.6)
171/4"
(438.1)
16"
(406.4)
131/2"
(88.9)
223/8"
(568.3)
195/16"
(490.5)
181/2"
(469.9)
151/2"
(393.7)
(107.9)
323/4"
(831.8)
281/4"
(717.5)
243/8"
(619.1)
197/8"
(504.8)
(107.9)
401/4"
(1022.3)
343/4"
(882.6)
301/8"
(765.2)
225/8"
(574.7)
B3146-20
20"
B3146-24
24"
(600)
31/2"
B3146-30
30"
(750)
41/4"
(900)
41/2"
B3146-36
36"
Pipe Clamps
Bolt
Size
Part No.
Maximum Design Load For
Service Temperature
650°F (343°C)
750°F (399°C)
Approx.
Wt./100
in.
(mm)
Lbs.
(kN)
Lbs.
(kN)
Lbs.
(kg)
B3146-6
1"
(25.4)
3500
(15.57)
3125
(13.90)
1200
(544.3)
B3146-8
11/8"
(28.6)
4800
(21.35)
4285
(19.06)
1850
(839.1)
B3146-10
11/4"
(31.7)
5500
(24.46)
4910
(21.84)
3030
(1374.4)
B3146-12
13/8"
(34.9)
7000
(31.13)
6250
(27.80)
4200
(1905.1)
B3146-14
11/2"
(38.1)
9500
(42.25)
8485
(37.74)
6000
(2721.6)
B3146-16
13/4"
(44.4)
10000
(44.48)
8930
(39.72)
8000
(3628.8)
B3146-18
2"
(50.8)
13800
(61.38)
12325
(54.82)
11500
(5216.4)
B3146-20
2"
(50.8)
15300
(68.05)
13665
(60.78)
14000
(6350.4)
B3146-24
2"
(50.8)
16300
(72.50)
14555
(64.74)
19000
(8618.4)
B3146-30
21/4"
(57.1)
20500
(91.18)
--
(--)
40600
(18416.1)
B3146-36
23/4"
(69.8)
28000
(124.54)
--
(--)
67800
(30754.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
85
Pipe Hangers & Supports
Pipe Clamps
Component of State of
California OSHPD Approved
Seismic Restraints System
Fig. 4B - Pipe Clamp for Sway Bracing (Cooper B-Line B386)
Size Range: 3/4” (20mm) to 8” (200mm) pipe
Material: Steel
Function: For bracing pipe against sway and seismic disturbance
C
Approvals: Included in the Seismic Restraints Catalog approved by the
State of California Office of Statewide Health Planning and Development
(OSHPD).
A
B
Standard Finish: Plain or Electro-Galvanized. Contact B-Line for
alternative finishes and materials.
D
Order By: Part number and finish.
Installation Instructions: Fig. 4B is the “braced pipe” attachment
component of a longitudinal or lateral sway brace assembly. It is intended
to be combined with the “bracing pipe” and transitional and structural
attachment component(s) to form a complete bracing assembly. NFPA 13
and/or OSHPD guidelines should be followed.
To Install: Place the Fig. 4B over the pipe to be braced. Attach other
transitional fitting, Fig. 909, 910, or 980. Tighten bolts and nuts. Transitional
fitting attachment can pivot for adjustment to proper brace angle.
Shown with two B-Line
Fig. 980’s and Schedule
40 brace pipe.
Fig. 4B - Hanger/Longitudinal Brace
in.
Pipe Size
(mm)
Rod Size
A
in.
(mm)
in.
(mm)
in.
(mm)
4B-3/4
3/4"
(20)
3/8"-16
1"
(25.4)
27/8"
(73.0)
25/8"
(66.7)
(25)
3/8"-16
(25.4)
31/4"
(82.5)
215/16"
(25.4)
39/16"
(90.6)
31/4"
4B-1
1"
B
1"
C
D
Bolt Size
Design Load
Approx. Wt./100
Lbs.
(kN)
Lbs.
(kg)
5/16"-18
330
(1.47)
56
(3.6)
(74.6)
5/16"-18
330
(1.47)
60
(3.6)
(82.5)
5/16"-18
330
(1.47)
74
(4.5)
4B-11/4
11/4"
(32)
3/8"-16
4B-11/2
11/2"
(40)
3/8"-16
1"
(25.4)
313/16"
(96.8)
37/16"
(87.3)
5/16"-18
330
(1.47)
79
(5.0)
2"
(50)
3/8"-16
11/2"
(38.1)
51/8"
(130.2)
45/8"
(117.5)
5/16"-18
440
(1.78)
156
(5.0)
21/2"
(65)
1/2"-13
13/4"
(44.4)
55/8"
(142.9)
53/8"
(136.5)
3/8"-16
440
(1.78)
176
(5.4)
3"
(80)
1/2"-13
17/8"
(47.6)
63/4"
(171.4)
61/8"
(155.5)
3/8"-16
660
(2.93)
198
(6.3)
(90)
1/2"-13
(50.8)
71/4"
(184.1)
63/4"
(171.4)
3/8"-16
660
(2.93)
219
(7.2)
(100)
5/8"-11
(50.8)
85/8"
(219.1)
71/4"
(184.1)
2/2"-13
800
(3.56)
288
(8.1)
97/8"
4B-2
4B-21/2
4B-3
4B-31/2
4B-4
31/2"
4"
1"
2"
2"
4B-5
5"
(125)
5/8"-11
2"
(50.8)
(250.8)
85/16"
(211.1)
5/8"-11
980
(4.36)
390
(8.1)
4B-6
6"
(150)
3/4"-10
21/8"
(54.0)
1015/16" (277.8)
91/2"
(241.3)
5/8"-11
980
(4.36)
448
(8.1)
4B-8
8"
(200)
7/8"-9
21/8"
(54.0)
137/16"
111/2"
(292.1)
3/4"-10
1200
(5.34)
691
(8.1)
(341.2)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
86
Pipe Clamps
Part No.
Pipe Clamps
B3148 - Offset Pipe Clamp (TOLCO Fig. 7)
Design Load
Bolts and Nuts
Included
Size Range: 1/2" (15mm) thru 12" (300mm) pipe
Material: Steel
Bolt Size
B
Function: Recommended for support of pipe lines running at a
definite distance from the wall or floor of a building or structure.
A
Maximum Temperature: — 650°F (343°C)
C
H
2 Holes
Finish: Plain. Contact B-Line for alterantive finishes and materials.
Note: Special “A” dimensions available on request,
consult factory.
Order By: Part number, pipe size and finish
Part No.
Pipe Size
in.
(mm)
in.
(mm)
Bolt Size
B
B3148-1/2
1/2"
(15)
27/16"
(61.9)
3/8"-16
B3148-3/4
3/4"
(20)
21/2"
(63.5)
3/8"-16
B3148-1
1"
(25)
25/8"
(66.7)
3/8"-16
61/4"
11/4"
(32)
23/4"
(69.8)
3/8"-16
611/16"
B3148-11/2 11/2"
(40)
3"
(76.2)
3/8"-16
B3148-11/4
A
C
in.
H
(mm)
Design Load
Approx. Wt./100
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
513/16" (147.6)
7/16"
(11.1)
190
(.84)
107
(48.5)
515/16" (150.8)
7/16"
(11.1)
190
(.84)
109
(49.4)
(158.7)
7/16"
(11.1)
190
(.84)
116
(52.6)
(169.9)
7/16"
(11.1)
190
(.84)
126
(57.1)
615/16" (176.2)
7/16"
(11.1)
190
(.84)
134
(60.8)
85/16"
(86.6)
(50)
33/16"
(81.0)
3/8"-16
(211.1)
7/16"
(11.1)
420
(1.87)
191
21/2"
(65)
37/16"
(87.3)
3/8"-16
87/8"
(225.4)
7/16"
(11.1)
420
(1.87)
209
(94.8)
3"
(80)
33/4"
(95.2)
3/8"-16
91/2"
(241.3)
7/16"
(11.1)
420
(1.87)
232
(105.3)
B3148-31/2 31/2"
(90)
4"
(101.6)
3/8"-16
101/16" (255.6)
7/16"
(11.1)
420
(1.87)
250
(113.4)
B3148-4
(100)
41/4"
(107.9)
1/2"-13
109/16" (268.3)
9/16"
(14.3)
610
(2.71)
370
(167.8)
(134.9)
1/2"-13
143/8"
(365.1)
9/16"
(14.3)
870
(3.87)
650
(294.8)
(160.3)
1/2"-13
167/16" (417.5)
9/16"
(14.3)
870
(3.87)
787
(357.0)
(187.3)
3/4"-10
211/2"
(546.1)
13/16"
(20.6)
925
(4.11)
1238
(561.5)
(212.7)
3/4"-10
247/8"
(631.8)
13/16"
(20.6)
1225
(5.45)
2100
(952.5)
B3148-2
B3148-21/2
B3148-3
2"
4"
Pipe Clamps
B3148-6
6"
(150)
55/16"
B3148-8
8"
(200)
65/16"
(250)
73/8"
(300)
83/8"
B3148-10
B3148-12
10"
12"
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
87
Pipe Hangers & Supports
Pipe Clamps
B3149 - Extended Pipe Clamp (TOLCO Fig. 8)
Size Range: 3/4" (20mm) thru 8" (200mm) pipe
Material: Steel
Bolt Size
B
Function: For suspending or supporting piping runs where the
pipe cannot be determined until installation. Field modify to suit
conditions.
A
C
Maximum Temperature: 650°F (343°C)
Finish: Plain. Contact B-Line for alternative finishes and materials.
Note: Special “A” dimensions available on request, consult factory.
Order By: Part number, pipe size and finish
in.
B3149-3/4
3/4"
(20)
1"
(25)
B3149-1
(mm)
B3149-11/4
11/4"
(32)
B3149-11/2
B3149-2
B3149-21/2
B3149-3
B3149-31/2
B3149-4
B3149-5
B3149-6
B3149-8
11/2"
2"
1
2 /2"
3"
31/2"
4"
5"
6"
8"
(40)
(50)
(65)
(75)
(90)
(100)
(125)
(150)
(200)
A
in.
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
(mm)
Bolt Size
B
in.
C
(mm)
Approx. Wt./100
Lbs.
(kg)
(304.8)
3/8"-16"
47/16"
(112.7)
3/8"-16"
411/16"
(119.1)
225
230
(102.0)
(304.8)
(304.8)
3/8"-16"
(304.8)
1/2"-13"
(304.8)
1/2"-13"
(304.8)
1/2"-13"
(304.8)
1/2"-13"
(304.8)
1/2"-13"
(304.8)
1/2"-13"
(304.8)
5/8"-11"
(304.8)
5/8"-11"
235
240
345
360
375
390
500
545
870
980
(106.6)
3/8"-16"
5"
51/4"
6"
1
7 /4"
77/8"
83/8"
91/4"
101/2"
121/2"
145/8"
(127.0)
(304.8)
(133.3)
(152.4)
(184.1)
(200.0)
(212.7)
(234.9)
(266.7)
(317.5)
(371.5)
(104.3)
(108.8)
(156.5)
(163.3)
(170.1)
(176.9)
(226.8)
(247.2)
(394.6)
(444.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
88
Pipe Clamps
Pipe Size
Part No.
Pipe Clamps
B3180FL - Flush Mount Pipe Strap (TOLCO Fig. 20S)
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel
Function: Recommended for supporting pipe with fittings
vertically or horizontally to walls or ceiling. Supports pipe
fglush with the mounting surface.
A
C
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 26 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 26.
B
D
Finish: Plain
Note: Available in Electro-Galvanized and
HDG finish or Stainless Steel materials.
Order By: Part number, pipe size and material/finish
Part
No.
Pipe Size
Pipe Clamps
B3180FL-1/2
B3180FL-3/4
B3180FL-1
B3180FL-11/4
B3180FL-11/2
B3180FL-2
B3180FL-21/2
B3180FL-3
B3180FL-31/2
B3180FL-4
B3180FL-5
B3180FL-6
B3180FL-8
A
B
in.
(mm)
in.
(mm)
in.
1/2"
(15)
(20)
(109.5)
1"
(25)
41/8"
45/16"
49/16"
415/16"
53/16"
53/4"
61/4"
67/8"
73/8"
83/8"
97/16"
101/2"
14"
(104.8)
3/4"
11/4"
(32)
11/2"
2"
1
2 /2"
3"
31/2"
4"
5"
6"
8"
(40)
(50)
(65)
(75)
(90)
(100)
(125)
(150)
(200)
C
D
(mm)
in.
(mm)
5/16"
(7.9)
3/4"
(11.1)
(76.2)
15/16"
(115.9)
9/16"
(14.3)
(85.7)
(125.4)
11/16"
(17.5)
(131.8) 13/16"
(20.6)
27/8"
3"
3
3 /8"
33/4"
41/4"
43/4"
51/4"
57/8"
63/8"
7"
77/8"
87/8"
111/2"
(73.0)
7/16"
11/8"
11/2"
15/8"
21/4"
23/4"
33/8"
37/8"
43/8"
53/8"
67/16"
83/8"
(146.0) 11/16" (27.0)
(158.7)
19/16"
(39.7)
(174.6)
15/8"
17/8"
21/8"
25/8"
33/16"
41/4"
(41.3)
(187.3)
(212.7)
(239.7)
(266.7)
(355.6)
(47.6)
(53.9)
(66.7)
(80.9)
(107.9)
(95.2)
(107.9)
(120.6)
(133.3)
(149.2)
(161.9)
(177.8)
(200.0)
(225.4)
(292.1)
in.
Hole Size
(mm)
Max. Rec. Load
Approx. Wt./100
in.
(mm)
Lbs.
(kN)
Lbs.
(19.0)
7/16
(11.1)
7/16"
(11.1)
(28.6)
7/16"
(11.1)
(38.1)
7/16"
(11.1)
(41.3)
7/16"
(11.1)
(57.1)
7/16"
(11.1)
(69.8)
7/16"
(11.1)
(85.7)
7/16"
(11.1)
(98.3)
7/16"
(11.1)
(111.1)
9/16"
(14.3)
(136.5)
9/16"
(14.3)
(163.5)
9/16"
(14.3)
(212.7)
11/16"
(17.5)
410
410
410
410
410
410
610
610
610
725
725
725
900
(1.82)
(23.8)
21
24
26
30
33
38
102
118
130
159
191
234
446
(1.82)
(1.82)
(1.82)
(1.82)
(1.82)
(2.71)
(2.71)
(2.71)
(3.22)
(3.22)
(3.22)
(4.00)
(kg)
(9.5)
(10.9)
(11.8)
(13.6)
(14.9)
(17.2)
(46.2)
(53.5)
(58.9)
(72.1)
(86.6)
(106.1)
(202.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
89
Pipe Hangers & Supports
Pipe Clamps
B3180 - Standard Pipe Strap (TOLCO Fig. 20)
Size Range: 1/2" (15mm) thru 8" (200mm) pipe
Material: Steel
Function: Recommended for supporting pipe with fittings
vertically or horizontally to walls or ceiling.
A
C
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 26 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 26.
B
D
Finish: Plain
Note: Available in Electro-Galvanized and
HDG finish or Stainless Steel materials.
Order By: Part number, pipe size and material/finish
Pipe Size
in.
A
(mm)
in.
B3180-1/2
1/2"
(15)
37/8"
B3180-3/4
B3180-1
B3180-11/4
B3180-11/2
B3180-2
B3180-21/2
B3180-3
B3180-31/2
B3180-4
B3180-5
B3180-6
B3180-8
3/4"
(20)
1"
1
1 /4"
11/2"
2"
21/2"
3"
31/2"
4"
5"
6"
8"
(25)
4"
49/16"
415/16"
53/16"
53/4"
61/4"
67/8"
73/8"
83/8"
97/16"
101/2"
14"
(32)
(40)
(50)
(65)
(75)
(90)
(100)
(125)
(150)
(200)
B
(mm)
in.
3/4"
(98.4)
(101.6) 13/16"
C
(mm)
in.
in.
(19.0)
31/16"
(20.6)
31/8"
33/8"
33/4"
41/4"
43/4"
51/4"
57/8"
63/8"
7"
77/8"
87/8"
111/2"
7/8"
(22.2)
(125.4)
1"
(25.4)
(131.8)
13/16"
(30.2)
(115.9)
(146.0) 17/16" (36.5)
(158.7) 111/16" (42.9)
(174.6)
(187.3)
(212.7)
(239.7)
(266.7)
(355.6)
2"
21/4"
21/2"
31/16"
35/8"
45/8"
D
(mm)
(50.8)
(57.1)
(63.5)
(77.8)
(92.1)
(117.5)
Hole Size
Max. Rec. Load
Approx. Wt./100
(mm)
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
(77.8)
15/32"
(11.9)
7/16
(11.1)
(33.3)
7/16"
(11.1)
(38.1)
7/16"
(11.1)
(47.6)
7/16"
(11.1)
(54.6)
7/16"
(11.1)
(66.7)
7/16"
(11.1)
(79.4)
7/16"
(11.1)
(95.2)
7/16"
(11.1)
(107.9)
7/16"
(11.1)
(120.6)
9/16"
(14.3)
(147.6)
9/16"
(14.3)
(174.6)
9/16"
(14.3)
(228.6)
11/16"
(17.5)
16
21
26
30
33
38
102
118
130
159
191
234
446
(7.2)
15/16"
11/2"
17/8"
21/8"
25/8"
31/8"
33/4"
41/4"
43/4"
513/16"
67/8"
9"
410
410
410
410
410
410
610
610
610
725
725
725
900
(1.82)
(79.4)
(85.7)
(95.2)
(107.9)
(120.6)
(133.3)
(149.2)
(161.9)
(177.8)
(200.0)
(225.4)
(292.1)
(1.82)
(1.82)
(1.82)
(1.82)
(1.82)
(2.71)
(2.71)
(2.71)
(3.22)
(3.22)
(3.22)
(4.00)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
90
(9.5)
(11.8)
(13.6)
(14.9)
(17.2)
(46.2)
(53.5)
(58.9)
(72.1)
(86.6)
(106.1)
(202.3)
Pipe Clamps
Part
No.
Pipe Clamps
B2400 - Standard Pipe Strap (TOLCO Fig. 2STR)
Design Load 1
Size Range: 1/2" (15mm) thru 24" (600mm) pipe
Pipe Size
Material: Steel
Function: Designed for supporting pipe runs from
strut supports.
Approvals: Underwriters Laboratories Listed for
B2400-3/4" thru B2400-8". Conforms to Federal
Specification WW-H-171E & A-A-1192A, Type 26 and
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 26.
Finish: Electro-Galvanized. Contact B-Line for
alternative finishes and materials.
Bolt Size
A
Design
Load 3
C
T
Order By: Part number, pipe size and finish
B
Note: Ductile iron sizes available.
Special “B” dimensions available on request,
consult factory.
W
Design Load 2
Part No.
Pipe Size
in.
A
(mm)
in.
B
(mm)
in.
C
(mm)
in.
(11.1)
213/16”
T
(mm)
in.
W
(mm)
in.
(mm)
(3.4)
15/8”
(41.3)
(41.3)
B2400-1/2
1/2”
(15)
5/16”
(7.9)
7/16”
B2400-3/4
3/4”
(20)
5/16”
(7.9)
7/16”
(11.1)
3”
(76.2)
10 Ga.
(3.4)
15/8”
1”
(25)
5/16”
(7.9)
7/16”
(11.1)
317/32”
(89.7)
10 Ga.
(3.4)
15/8”
(41.3)
(7.9)
7/16”
(11.1)
33/4”
(95.2)
10 Ga.
(3.4)
15/8”
(41.3)
(7.9)
7/16”
(11.1)
41/16”
(103.2)
10 Ga.
(3.4)
15/8”
(41.3)
(17.4)
521/32”
(143.6)
1/4”
(6.3)
15/8”
(41.3)
(17.4)
65/32”
(156.3)
1/4”
(6.3)
15/8”
(41.3)
(172.2)
1/4”
(6.3)
15/8”
(41.3)
(184.9)
1/4”
(6.3)
15/8”
(41.3)
(6.3)
15/8”
(41.3)
(6.3)
15/8”
(41.3)
(41.3)
B2400-1
(71.4)
10 Ga.
B2400-11/4
11/4”
(32)
5/16”
B2400-11/2
11/2”
(40)
5/16”
2”
(50)
7/16”
(11.1)
11/16”
21/2”
(65)
7/16”
(11.1)
11/16”
3”
(80)
7/16”
(11.1)
11/16”
(17.4)
625/32”
31/2”
(90)
7/16”
(11.1)
11/16”
(17.4)
79/32”
(14.3)
11/16”
(17.4)
725/32”
(197.6)
1/4”
(14.3)
11/16”
(17.4)
87/8”
(225.4)
1/4”
(17.4)
915/16”
(252.4)
1/4”
(6.3)
15/8”
(17.4)
1131/32”
(304.0)
1/4”
(6.3)
15/8”
(41.3)
(6.3)
15/8”
(41.3)
(6.3)
15/8”
(41.3)
(44.4)
B2400-2
B2400-21/2
Pipe Clamps
B2400-3
B2400-31/2
B2400-4
4”
(100)
9/16”
B2400-5
5”
(125)
9/16”
(14.3)
11/16”
(14.3)
11/16”
(17.4)
14”
(355.6)
1/4”
(17.4)
16”
(406.4)
1/4”
(517.5)
3/8”
(9.5)
13/4”
(568.3)
3/8”
(9.5)
13/4”
(44.4)
(12.7)
13/4”
(44.4)
(12.7)
13/4”
(44.4)
(12.7)
13/4”
(44.4)
B2400-6
6”
(150)
9/16”
B2400-8
8”
(200)
9/16”
(14.3)
11/16”
(14.3)
11/16”
(33.3)
203/8”
(33.3)
223/8”
(663.6)
1/2”
(714.4)
1/2”
(816.0)
1/2”
B2400-10
10”
(250)
9/16”
B2400-12
12”
(300)
9/16”
(23.8)
15/16”
(23.8)
15/16”
(33.3)
261/8”
(33.3)
281/8”
(33.3)
321/8”
B2400-14
14”
(350)
15/16”
B2400-16
16”
(400)
15/16”
(23.8)
15/16”
(23.8)
15/16”
(23.8)
15/16”
B2400-18
18”
(450)
15/16”
B2400-20
20”
(500)
15/16”
(600)
15/16”
B2400-24
24”
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
91
Pipe Hangers & Supports
Pipe Clamps
B2400 - Standard Pipe Strap (TOLCO Fig. 2STR) Cont.
Design Load 1
Pipe Size
Bolt Size
A
Design
Load 3
C
T
B
W
Design Load 2
Design Load 1
Design Load 2
Design Load 3
Approx. Wt./100
Lbs.
(kN)
Lbs.
(kN)
Lbs.
(kN)
Lbs.
B2400-1/2
600
(2.67)
150
(.67)
105
(.47)
23
(10.4)
B2400-3/4
600
(2.67)
150
(.67)
105
(.47)
26
(11.8)
B2400-1
600
(2.67)
150
(.67)
120
(.53)
31
(14.0)
B2400-11/4
600
(2.67)
150
(.67)
120
(.53)
36
(16.3)
B2400-11/2
600
(2.67)
150
(.67)
120
(.53)
39
(17.7)
B2400-2
1200
(5.34)
480
(2.14)
180
(.80)
93
(42.2)
B2400-21/2
1200
(5.34)
480
(2.14)
180
(.80)
106
(48.1)
B2400-3
1200
(5.34)
480
(2.14)
300
(1.33)
132
(59.9)
B2400-31/2
1200
(5.34)
480
(2.14)
300
(1.33)
151
(68.5)
B2400-4
1500
(6.67)
600
(2.67)
450
(2.00)
160
(72.6)
B2400-5
1500
(6.67)
600
(2.67)
450
(2.00)
192
(87.1)
B2400-6
1500
(6.67)
600
(2.67)
450
(2.00)
219
(99.3)
B2400-8
2000
(8.90)
800
(3.56)
600
(2.67)
297
(134.7)
B2400-10
2000
(8.90)
800
(3.56)
600
(2.67)
465
(210.9)
B2400-12
2000
(8.90)
800
(3.56)
600
(2.67)
560
(254.0)
B2400-14
2000
(8.90)
800
(3.56)
600
(2.67)
761
(345.2)
B2400-16
2000
(8.90)
800
(3.56)
600
(2.67)
861
(390.5)
B2400-18
2000
(8.90)
800
(3.56)
600
(2.67)
1297
(588.3)
B2400-20
2000
(8.90)
800
(3.56)
600
(2.67)
1426
(646.8)
B2400-24
2000
(8.90)
800
(3.56)
600
(2.67)
1682
(762.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
92
(kg)
Pipe Clamps
Part No.
Pipe Clamps
Fig. 22 - Hanger for CPVC Plastic Pipe
Single Fastener Strap (Cooper B-Line B3181)
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe
Material: Pre-Galvanized Steel
C
Function: Intended to perform as a hanger to support CPVC piping used
in automatic fire sprinkler systems. The product acts as a hanger when tab
is upward and the fastener screw is in the horizontal position. Fig. 22 can
be installed on the top of a beam, but in this situation acts as a guide to the
piping which is supported by the beam itself. It is not intended to support
CPVC pipe from under a flat horizontal surface, such as a ceiling.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using
(1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13,
13R and 13D.
A
Features: Fig. 22 incorporates features which protect the pipe and ease
installation. The flared edge design protects CPVC pipe from any rough
surface. It is easily attached to the building structure using the special UL
Listed hex head self threading screw* furnished with the product. It is
recommended that rechargeable electric drills fitted with a hex socket
attachment to be used as installation tools. No impact tools (such as a
hammer) are allowed. Damage has been known to result from installations
using impact type tools. No pre-drilling of a pilot hole in wood is
required.
B
Finish: Pre-Galvanized
Order By: Part number and CPVC pipe size.
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
CPVC
Pipe Size
Pipe Clamps
Part No.
22-3/4
22-1
22-11/4
22-11/2
22-2
A
B
C
Max. Hanger
Spacing
Fastener Hex
Head Size
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
Ft.
(m)
in.
(mm)
Lbs.
(kg)
3/4"
(20)
(61.9)
13/16"
13/16"
13/16"
13/16"
13/16"
(30.2)
51/2
6
61/2
7
8
(1.67)
5/16"
(7.9)
(1,83)
5/16"
(7.9)
(1.98)
5/16"
(7.9)
(2.13)
5/16"
(7.9)
(2.44)
5/16"
(7.9)
9
9
11
12
15
(4.1)
(25)
15/16"
17/16"
15/8"
13/4"
21/8"
(33.3)
1"
11/4"
11/2"
2"
27/16"
211/16"
31/16"
35/16"
33/4"
(32)
(40)
(50)
(68.3)
(77.8)
(84.1)
(95.2)
(36.5)
(42.3)
(44.4)
(54.6)
(30.2)
(30.2)
(30.2)
(30.2)
(4.1)
(5.0)
(5.4)
(6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
93
Pipe Hangers & Supports
Pipe Clamps
Fig. 22L2 - One Hole Hanger/Restrainer for CPVC & Steel Pipe
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC & steel pipe
Material: Pre-Galvanized Steel
Function: cULus Listed to perform as a hanger and restrainer for CPVC or
IPS piping systems. The innovative design also allows for a preferred
installation location close to a CPVC fitting without applying damaging
compression forces on the pipe which could result in serious Mechanical ESC
(Environmental Stress Cracking).
C
A
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using
(1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13,
13R and 13D.
Installation Note: Comes in open position for easier installation. Because of
multi – structural installation possibilities, specific fastener not included; see
notes below for various applications.
For Concrete Installation — UL requires a minimum test load of 340 lbs for
CPVC hangers and 750 lbs for steel pipe hangers; verify anchors meet or
exceed these requirements.
For Wood Installation — Test results have shown that #14 x 1½” wood
screws will support the required load for c UL us.
B
For Steel Installation — Test results have shown that 1/4” x 1” (min. 20ga
steel) Tek type screw will support required UL load.
Finish: Pre-Galvanized
Order By: Part number
Patent Pending
Mounting
Surface
MOUNTING SURFACE
Sprinkler
SPRINKLER
Head
HEAD
Pipe Clamps
HANGER/RESTRAINER
Hanger/Restrainer
TAB
Tab DOWN
Down
or TAB
or
Tab UP
Up
PIPE OD
Pipe
OD
Offset
Design
OFFSET
DESIGN
Hanger/Restrainer
HANGER/RESTRAINER
CPVC or Steel
Pipe Size
Part No.
in.
A
Fitting
OD
FITTING OD
B
Max. Hanger
Spacing - CPVC
C
Max. Hanger
Spacing - Steel
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
Ft.
(m)
Ft.
22L2-3/4
3/4"
(20)
23/16"
(55.6)
15/16"
(23.8)
3/4"
(19.0)
51/2
(1.67)
22L2-1
22L2-11/4
22L2-11/2
22L2-2
1"
11/4"
11/2"
2"
(25)
21/2"
213/16"
31/8"
39/16"
(63.5)
11/8"
11/4"
17/16"
15/8"
(28.6)
3/4"
(19.0)
(1,83)
(31.7)
3/4"
(19.0)
(36.5)
3/4"
(19.0)
(41.3)
3/4"
(19.0)
6
61/2
7
8
NA
12
12
15
15
(32)
(40)
(50)
(71.4)
(79.4)
(90.5)
(1.98)
(2.13)
(2.44)
Approx.
Wt./100
(m)
Lbs.
(kg)
(NA)
9
9
11
12
15
(4.1)
(3.66)
(3.66)
(4.57)
(4.57)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
94
(4.1)
(5.0)
(5.4)
(6.8)
Pipe Clamps
Fig. 23 - Hanger for CPVC Plastic Pipe
Double Fastener Strap (Cooper B-Line B3182)
Size Range: 3/4" (20mm) thru 3" (80mm) CPVC pipe
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger to support CPVC piping
used in automatic fire sprinkler systems. Fig. 23 can be installed
on the top, bottom or side of a beam.
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL) sizes 3/4" (20mm) thru 2" (50mm) to support fire
sprinkler piping. May be installed in wood using fasteners supplied
with product, or into minimum 20 gauge (0.9mm) steel using (2) 1/4" x
1" tek type screw. Meets and exceeds the requirements of NFPA
13, 13R and 13D.
B
Features: Fig. 23 incorporates features which protect the pipe
and ease installation. The flared edge design protects the CPVC
pipe from any rough surface. It also incorporates snap restrainers
allowing easier and faster installation. Easily attaches to the building
structure using the two UL Listed hex head self threading screws*
furnished with the product. It is recommended that rechargeable
electric drills fitted with a hex socket attachment be used as
installation tools. No impact tools (such as a hammer) are allowed.
Damage has been known to result from installations using impact
type tools. No pre-drilling of a pilot hole in wood is required.
A
B
C
Finish: Pre-Galvanized
Order By: Part number and pipe size
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
Pipe Clamps
CPVC
Pipe Size
Part No.
in.
A
B
Max. Hanger
Spacing
C
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
Ft.
23-3/4
3/4"
(20)
31/8"
(79.4)
19/16"
(39.7)
13/16"
(30.2)
51/2
23-1
23-11/4
23-11/2
23-2
23-21/2
23-3
1"
11/4"
11/2"
2"
21/2"
3"
(25)
33/8"
43/16"
47/16"
47/8"
53/8"
6"
(85.7)
111/16"
23/32"
27/32"
27/16"
211/16"
3"
(42.9)
13/16"
13/16"
13/16"
13/16"
13/16"
13/16"
(30.2)
(32)
(40)
(50)
(65)
(80)
(106.4)
(112.7)
(123.8)
(136.5)
(152.4)
(53.1)
(56.3)
(61.9)
(68.3)
(76.2)
(30.2)
(30.2)
(30.2)
(30.2)
(30.2)
Fastener Hex
Head Size
Approx.
Wt./100
(m)
in.
(mm)
Lbs.
(kg)
(1.67)
5/16"
(7.9)
5/16"
(7.9)
5/16"
(7.9)
5/16"
(7.9)
5/16"
(7.9)
5/16"
(7.9)
5/16"
(7.9)
9
9
11
12
15
22
25
(4.1)
6
(1,83)
61/2
(1.98)
7
(2.13)
8
(2.44)
Consult Factory
Consult Factory
(4.1)
(5.0)
(5.4)
(6.8)
(10.0)
(11.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
95
Pipe Hangers & Supports
Pipe Clamps
Fig. 24 - Hanger for CPVC Plastic Pipe
Double Fastener Strap Side Mounted (Cooper B-Line B3183)
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger to support CPVC piping used in
automatic fire sprinkler systems. Can be installed on the top or on the bottom
of a beam.
C
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.912mm) steel
using (2) 1/4" x 1" tek type screws. Meets and exceeds the requirements of
NFPA 13, 13R and 13D.
Features: Fig. 24 incorporates features which protect the pipe and
ease installation. The flared edge design protects the CPVC pipe from
any rough surface. Easily attaches to the building structure using the two
UL Listed hex head self threading screws* furnished with the product. It
is recommended that rechargeable electric drills fitted with a hex socket
attachment be used as installation tools. No impact tools (such as a hammer)
are allowed. Damage has been known to result from installations using
impact type tools. No pre-drilling of a pilot hole in wood is required.
B
B
Finish: Pre-Galvanized
A
Order By: Part number and pipe size
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
Part No.
in.
A
B
Max. Hanger
Spacing
C
Fastener Hex
Head Size
Approx.
Wt./100
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
Ft.
(m)
in.
(mm)
Lbs.
(kg)
24-3/4
3/4"
(20)
25/16"
(58.7)
15/32"
(27.8)
13/16"
(30.2)
51/2
(1.67)
5/16"
(7.9)
1"
11/4"
11/2"
2"
(25)
25/8"
3"
1
3 /4"
311/16"
(66.7)
15/16"
11/2"
15/8"
127/32"
(33.3)
13/16"
13/16"
13/16"
13/16"
(30.2)
6
61/2
7
8
(1,83)
5/16"
(7.9)
(1.98)
5/16"
(7.9)
(2.13)
5/16"
(7.9)
(2.44)
5/16"
(7.9)
9
9
11
12
15
(4.1)
24-1
24-11/4
24-11/2
24-2
(32)
(40)
(50)
(76.2)
(82.5)
(93.7)
(38.1)
(42.3)
(43.6)
(30.2)
(30.2)
(30.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
96
(4.1)
(5.0)
(5.4)
(6.8)
Pipe Clamps
CPVC
Pipe Size
Pipe Clamps
Fig. 25 - Surge Restrainer
Size Range: — One size fits 3/4" (20mm) thru 2" (40mm) pipe.
Material: — Pre-Galvanized Steel
Function: — Designed to be used in conjunction with Fig. 200 band hangers
to restrict the upward movement of piping as it occurs during sprinkler head
activation or earthquake type activity. The surge restrainer is easily and
efficiently installed by snapping into a locking position on the band hanger.
This product is intended to satisfy the requirements as indicated in the
National Fire Protection Association NFPA 13, 2010 edition, 9.2.3.4.4.1 and
9.2.3.4.4.4 Can be used to restrain either steel pipe or CPVC plastic Pipe.
Approvals: — Underwriters Laboratories Listed only when used with band
hanger Fig. 200, in the USA (UL) and Canada (cUL).
Finish: Pre-Galvanized
Order By: Part number and band hanger, size from
3/4" (20mm) thru 2" (40mm).
Patent #5,344,108
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
97
Pipe Hangers & Supports
Pipe Clamps
Fig. 27B - Speed Nut
Size Range: — Fits screws supplied with all CPVC hangers.
Material: — Steel
Finish: — Pre-Galvanized (Zinc)
Function: — To be used anywhere a screw cannot achieve full embedment due to
thickness of wood structural material when installed. Fig. 27B allows full pull out load
capacity of screws when installed to the standard screws supplied with all CPVC
hangers (Fig. 22, 23, 24, 28, 28M, 29, and B3184).
Fig. 27B
(1) Required High
Side of Hanger
Application
Fig. 27B
(2) Required
Hanger Application
Pipe Clamps
Hanger and Restraint
Application
Fig. 27B
(2) Required
Fig. 27B
(1) Required High Side of
Hanger Application
Hanger Application
Hanger and Restraint
Application
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
98
Pipe Clamps
Fig. 28 - “Stand-Off” Hanger & Restrainer for CPVC Plastic Pipe
Size Range: — 3/4" (20mm) through 2" (50mm)
Material: — Steel, Pre-Galvanized
Function: — Designed to be used as a hanger and restrainer for CPVC piping where
the "stand-off" design will ease installation by eliminating the need for wood blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces.
• Unique twist and lock design holds pipe firmly in place and allows retrofit type of installation.
• The "Stand-Off" design eliminates the need for wood block extension.
• Can be installed on horizontal or vertical piping regardless of mounting surface orientation.
• Attaches easily to wood structure with two hex head self-threading screws furnished with
product.
• Installs easily using rechargeable electrical driver with 5/16" (7.9mm) extension socket
eliminating impact tool damage to pipe.
• Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4" x 1" tek type self drilling
tapping screws.
• UL Listed as a hanger and a restrainer for fire sprinkler piping.
A
C
B
Approvals: — Underwriters Laboratory Listed in the USA (UL) and Canada (cUL) to
support automatic fire sprinkler systems. May be installed into wood using fasteners
supplied with product, or into minimum 18 gauge steel using (2) 1/4" x 1" tek type
screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Fig. 28 satisfies
the UL vertical restraint requirement where needed. UL Listed as a hanger and vertical
restraint when installed on 3/8" (9.5mm) composite wood material. Use two Fig. 27B Speed
Nuts when used as a hanger and restraint. Use one Fig. 27B Speed Nut on the upper
installed screw when used as a hanger only.
Order by: — Part number and pipe size.
Pat. # 7,455,268, Pat. # 7,832,248
Pipe Clamps
Fig. 27B
(2) Required
Fig. 27B
(1) Required High
Side of Hanger
Application
Hanger Application
Hanger and Restraint
Application
Pipe Size
A
B
Part No.
in.
(mm)
in.
(mm)
28-3/4
28-1
28-11/4
28-11/2
28-2
3/4"
(20)
31/32"
35/16"
35/8"
4"
1
4 /2"
1"
11/4"
11/2"
2"
(25)
(32)
(40)
(50)
C
Approx. Wt./100
in.
(mm)
in.
(mm)
lbs.
(kg)
(77.0)
2"
(50.8)
(92.1)
23/8"
21/2"
211/16"
(60.3)
18
21
23
31
34
(8.1)
(55.6)
31/2"
31/2"
31/2"
31/2"
35/8"
(88.9)
(84.1)
23/16"
(101.6)
(114.3)
(63.5)
(68.3)
(88.9)
(88.9)
(88.9)
(92.1)
(9.5)
(10.4)
(14.0)
(15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
99
Pipe Hangers & Supports
Pipe Clamps
Fig. 28M - Offset Hanger & Restrainer for CPVC Plastic Pipe and IPS Pipe
Size Range: 3/4" (20mm) thru 2" (32mm)
Material: Steel, Pre-Galvanized
Function: Designed to be used as a hanger and restrainer for CPVC piping or steel piping
where the “stand-off” design will ease installation by eliminating the need for wood blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces
• Unique snap-on design holds pipe firmly in place and allows retrofit type of installation
• The “Stand-Off” design eliminates the need for wood block extension
• Can be installed on horizontal or vertical piping regardless of mounting surface orientation
• Attaches easily to wood structure with two hex head self-threading screws furnished with
product
• Installs easily using rechargeable electrical driver with 5/16” (7.9mm) extension socket
eliminating impact tool damage to pipe
• Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4” x 1” tek type self
drilling
tapping screws
• cULus Listed as a hanger and a restrainer for fire sprinkler piping
A
C
B
Installation Note: When installed in wood structural members and threads from the
#10 x 1" screws are exposed, use Fig. 27B speed nut to secure
Approvals: Underwriters Laboratory Listed in the USA (UL) and Canada (cUL)
to support automatic fire sprinkler systems.
May be installed into wood using fasteners screws.
Meets and exceeds the requirements of NFPA 13,
13R and 13D. Fig. 28M satisfies the UL vertical
restraint requirements where needed.
Fig. 27B
(2) Required
Order By: Part number and pipe size
Patent #7,744,042
Fig. 27B
(1) Required
High Side of Hanger
Restraint
Restraint
Detail A
Hanger Application
Pipe Size
Part No.
Pipe Clamps
Hanger and Restraint
Application
in.
(mm)
28M-3/4
3/4"
(20)
28M-1
28M-11/4
28M-11/2
28M-2
1"
11/4"
11/2"
2"
(25)
(32)
(49)
(50)
A
in.
2"
21/8"
25/16"
27/16"
25/8"
Hole Dia. B
(mm)
in.
C
Max Spacing*
Approx. Wt./100
(mm)
in.
(mm)
in.
(mm)
lbs.
(kg)
(50.8)
3/16"
(4.8)
35/16"
(84.1)
(4.8)
(88.9)
(58.7)
3/16"
(4.8)
(61.9)
3/16"
(4.8)
(66.7)
3/16"
(4.8)
31/2"
31/2"
37/8"
47/16"
9
12
13
14
15
(4.1)
3/16"
5’-6”
6’-0”
6’-6”
7’-0”
8’-0”
(1676)
(54.0)
(88.9)
(98.4)
(112.7)
(1829)
(1981)
(2133)
(2438)
* Required per NFPA 13 for CPVC plastic pipe
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
100
(5.4)
(5.9)
(6.3)
(6.8)
Pipe Clamps
Fig. 29 - Double Offset Hanger & Restrainer for CPVC Plastic Pipe
Size Range: Available in 3/4" (20mm) and 1" (25mm) pipe sizes
1.5”
(38.1mm)
Material: Pre-Galvanized Steel
Function: Intended to perform as a hanger and restrainer for CPVC, plastic fire sprinkler
pipe. Provides double offset 11/2” (20mm) x 11/2” (20mm) from mounting surface. This design
will ease installation by eliminating the need for wood block extension and allow retro-fit
attachment of hanger to sprinkler pipe.
1.5”
(38.1mm)
Features:
• Thumb tab provides protection to restrain pipe in rough job site conditions. Tab is not
required to be bent for listed installation.
• Offset edge eliminates abrasion.
• Attaches easily to wood structure with two special #10 x 1” hex head self-threading
screws furnished with product.
• Can be used as a single offset hanger by aligning "dimples" with top of mounting
surface and utilizing two fasteners in two of the three holes provided.
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) as a
hanger and restrainer to support fire sprinkler systems. Meets and exceeds requirements of
NFPA 13, 13R and 13D.
Finish: Pre-Galvanized
Order By: Part number and pipe size.
Patent Pending
Pipe Size
Part No.
29-3/4
29-1
Approx. Wt./100
in.
(mm)
lbs.
(kg)
3/4"
(20)
(7.7)
1"
(25)
17.0
18.6
1.5”
(38.1mm)
(8.4)
1.5”
(38.1mm)
Pipe Clamps
Double Offset
Single Offset
Install using a rechargeable electric drill fitted with a 5/16” (7.9mm) socket attachment with the special hex head self-tapping
screws provided. Install screws until they bottom out. Pipe can be “snapped” into hanger before or after installation of
the screws to the mounting surface. “Thumb tab” may be bent up to provide additional protection to the pipe, but is not
required for performance of the hanger / restrainer function.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
101
Pipe Hangers & Supports
Pipe Clamps
B3184 - Offset Hanger for CPVC Plastic Pipe and IPS Pipe
Size Range: 3/4" (20mm) thru 2" (32mm)
Material: Pre-Galvanized Steel
Function: Designed to be used as a hanger for CPVC piping or steel piping
where the “stand-off” design will ease installation by eliminating the need
for wood blocking.
Pipe Size
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive
surfaces
• The “Stand-Off” design eliminates the need for wood block extension
• Can be installed on horizontal or vertical piping regardless of mounting
surface orientation
• Attaches easily to wood structure with two hex head self-threading
screws furnished with product
• cULus Listed as a hanger for fire sprinkler piping
H
Installation Note: When installed in wood structural members and threads
from the #10 x 1" screws are exposed, use Fig. 27B speed nut to secure
L
Approvals: Underwriters Laboratory Listed in the USA (UL) and Canada
(cUL) 3/4" (20mm) thru 2" (50mm) to support automatic fire sprinkler systems.
May be installed into wood using fasteners screws. Meets and exceeds the
requirements of NFPA 13, 13R and 13D.
Order By: Part number and pipe size
CPVC
Pipe Size
L
Overall
H
Overall
Max. Hanger
Spacing
Fastener Hex
Head Size
Approx.
Wt./100
Part No.
in.
(mm)
in.
(mm)
in.
(mm)
ft.
(m)
in.
(mm)
Lbs.
(kg)
B3184-3/4
B3184-1
B3184-11/4
B3184-11/2
B3184-2
3/4"
(20)
41/4"
41/2"
45/8"
5"
5"
(107.9)
51/2
6
1
6 /2
7
8
(1.67)
5/16"
(7.9)
(1,83)
5/16"
(7.9)
(1.98)
5/16"
(7.9)
(2.13)
5/16"
(7.9)
(2.44)
5/16"
(7.9)
9.0
10.0
12.0
12.0
15.0
(4.1)
(25)
29/16"
213/16"
33/16"
37/16"
37/8"
(65.1)
1"
1
1 /4"
11/2"
2"
(32)
(40)
(50)
(71.4)
(81.0)
(87.3)
(98.4)
(114.3)
(117.5)
(127.0)
(127.0)
(4.5)
(5.4)
(5.4)
(6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
102
Pipe Clamps
Patent # 7,744,042
Pipe Clamps
KWIK-CLIP™ Series
Size Range:
1/2" (15mm) thru 2" (50mm) Copper Tubing or CPVC pipe sizes
3/8" (9.5mm) thru 21/8" (54mm) O.D. Tubing sizes
Material: Plastic - Black
Features:
• One piece design greatly reduces installation time.
• No tools required to install.
• Non-metallic design eliminates metal-to-metal contact;
preventing galvanic corrosion.
• Easily snaps into channel or onto 3/8”-16 all thread rod.
• Meets UL2043 requirements for plenum rating; and
UL94 HB flame rating.
• Working temperature range of -40°F (-40°C) to
+275°F (135°C).
• BPIC and BPSC clips can be used with insulation,
maintaining an unbroken barrier seal and eliminating sweating.
• BPRC rod clip can be snapped onto 3/8”-16 all thread rod at
any location.
Order By: Part number.
Rod Mount Clips
BPRC Series
Pipe Clamps
Part
Number
BPRC062
BPRC075
BPRC087
BPRC100
BPRC112
BPRC125
BPRC137
BPRC150
BPRC162
BPRC200
BPRC212
Copper/CPVC Pipe
O.D. Tubing
Sch.40 Pipe
(mm)
in.
(mm)
in.
(mm)
lbs.
(kg)
1/2”
(15)
5/8”
(15.9)
3/4”
(19.0)
3/4”
(20)
7/8”
(22.2)
-1”
-1
1 /4”
-11/2”
-2”
(--)
1”
11/8”
11/4”
13/8”
11/2”
15/8”
2”
21/8”
(25.4)
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.3
2.5
2.7
(0.54)
(16)
--1/2”
3/4”
-1”
------
(--)
5/8”
in.
(25)
(--)
(32)
(--)
(40)
(--)
(50)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(50.8)
(54.0)
(--)
(12.7)
(19.0)
(--)
(25.4)
(--)
(--)
(--)
(--)
(--)
Approx. Wt./100
(0.59)
(0.63)
(0.68)
(0.72)
(0.77)
(0.81)
(0.95)
(1.04)
(1.13)
(1.22)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
103
Pipe Hangers & Supports
Pipe Clamps
KWIK-CLIP™ Series - cont.
Channel Mount Clips
Part
Number
BPSC037
BPSC050
BPSC062
BPSC075
BPSC087
BPSC112
BPSC137
BPSC162
Part
Number
BPIC062
BPIC075
BPIC087
BPIC100
BPIC112
BPIC125
BPIC137
BPIC150
BPIC162
BPIC200
BPIC212
Copper/CPVC Pipe
BPSC Series
O.D. Tubing
Sch.40 Pipe
(mm)
in.
(mm)
in.
(mm)
lbs.
(kg)
1/4”
(6)
3/8”
(9.5)
1/2”
(12.7)
1/2”
(15)
5/8”
(15.9)
5/8”
(16)
3/4”
(19.0)
3/4”
(20)
7/8”
(22.2)
1”
11/4”
11/2”
(25)
11/8”
13/8”
15/8”
(28.6)
2.3
2.6
2.8
3.3
3.9
4.5
5.0
5.5
(1.0)
(10)
----1/2”
----
(--)
3/8”
in.
(32)
(40)
Copper/CPVC Pipe
(34.9)
(41.3)
(--)
(--)
(--)
(12.7)
(--)
(--)
(--)
Approx. Wt./100
(1.2)
(1.3)
(1.5)
(1.7)
(2.0)
(2.2)
(12.5)
O.D. Tubing
Sch.40 Pipe
in.
(mm)
in.
(mm)
in.
(mm)
lbs.
(kg)
1/2”
(15)
5/8”
(15.9)
3/4”
(19.0)
3/4”
(20)
7/8”
(22.2)
-1”
-1
1 /4”
-11/2”
-2”
(--)
1”
11/8”
11/4”
13/8”
11/2”
15/8”
2”
21/8”
(25.4)
2.9
2.9
3.0
3.2
3.3
3.4
3.5
3.8
4.0
4.2
4.4
(1.3)
(16)
--1/2”
3/4”
-1”
------
(--)
5/8”
Insert in channel.
(25)
(--)
(32)
(--)
(40)
(--)
(50)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(50.8)
(54.0)
(--)
(12.7)
(19.0)
(--)
(25.4)
(--)
(--)
(--)
(--)
(--)
Approx. Wt./100
(1.3)
(1.4)
(1.4)
(1.5)
(1.5)
(1.6)
(1.7)
(1.8)
(1.9)
(2.0)
Lay tubing/pipe into clip.
Twist into place.
Pipe Clamps
BPIC Series
Snap clip closed.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
104
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement