BH FITNESS | X1 | Owner`s manual | BH FITNESS X1 Owner`s manual

LK500Ri
OWNER’S MANUAL
Important: Read all instructions carefully before using this product. Retain this owner’s manual for future reference.
BH North America | 20155 Ellipse, Foothill Ranch, California 92610 | p.949.206.0330 | f.949.206.0013 | www.BHFitnessUSA.com
TABLE OF CONTENTS
TitlePage
Introduction03
Warnings and Labels04
Safety Information05
Exercise Instruction06
Training Guidelines07
Suggested Stretching11
Assembly Instructions13
Console Operations18
Maintenance and Cleaning
27
Exploded View
Drawing28
Parts List29
Warranty30
CONGRATULATIONS
Congratulations on your purchase of BH Fitness equipment. We hope you appreciate
the style, quality, and value that exercisers around the world have come to expect from
BH Fitness.
If you have any questions, concerns or product issues please call our Customer Service
Team at 1-866-325-2339 or email us at CustomerSupport@BHNorthAmerica.com.
Carefully read through the instructions contained in this manual. They provide you
with important information about assembly, safety, fitness and use of the machine.
Please read ALL the safety information contained on the following page.
3
WARNINGS AND LABELS
4
SAFETY INFORMATION
PRECAUTIONS
This recumbent bike has been designed and constructed to provide maximum safety.
Nevertheless, certain precautions should be taken when using exercise equipment. Read
the whole manual before assembling and using the machine. Please observe the following
safety precautions:
1. Keep children and pets away from this equipment at all times. DO NOT leave them unsupervised in the
room where the machine is kept.
2. If you experience dizziness, nausea, chest pains or any other symptom while using this machine STOP the
exercise. SEEK IMMEDIATE MEDICAL ATTENTION!
3. Use the machine on a level and solid surface. Adjust the feet for stability.
4. Keep your hands away from any of the joints and moving parts.
5. Wear clothing suitable for doing exercise. Do not wear baggy clothing that might get caught in the machine.
Always wear athletic shoes when using the machine and tie the laces securely.
6. This machine must only be used for the purposes described in this manual. DO NOT use accessories that
are not recommended by BH Fitness. Read manual prior to use and follow all warnings and instructions.
7. Do not place sharp objects near the machine.
8. Any person with physical or coordination limitations should not use the machine without the assistance of
a qualified person or doctor. Misuse of this machine may result in serious injury.
9. Do warm-up stretching exercises before using the equipment.
10. Do not use the machine if it is not working correctly.
11. Before using the machine, thoroughly inspect the equipment for proper assembly.
12. Keep a perimeter of 3 feet (1 meter) around the machine before operating the equipment.
13. Use only authorized and trained technicians if a repair is needed.
14. Please follow the advice for correct training, as detailed in the Training Guidelines.
15. Use only the tools provided to assemble this machine.
16. Replace warning labels if damaged, illegible or removed.
17. This machine was designed for a maximum user weight of 300 lbs (136 kgs)
18. The machine can only be used by one person at a time.
Caution: Consult your doctor before beginning to use the machine or any exercise program. Read all
of the instructions before using any exercise equipment.
KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
5
EXERCISE INSTRUCTION
Use of the machine offers various benefits; it can improve fitness, muscle tone and when
used in conjunction with a calorie controlled diet, it can help you lose weight.
1. Consult your doctor before starting any exercise program. It is advisable to
undergo a complete physical examination.
2. Work at the recommended exercise level. Do not over exert yourself.
3. If you feel any pain or discomfort, stop exercising immediately and consult your
doctor.
4. Wear appropriate clothing and footwear for the exercise; do not wear loose
clothing; do not wear leather soled shoes or footwear with high heels.
5. It is advised that you do warm-up stretches before working out.
6. Get on the equipment slowly and securely.
7. Select the program or workout option that is most closely aligned with your
workout interests.
8. Start slowly and work your way up to a comfortable pace.
9. Be sure to cool down after your workout.
6
TRAINING GUIDELINES
Exercise is one of the most important factors in the overall health of an individual.
Listed among its benefits are:
• Increased capacity for physical work (strength endurance)
• Increased cardiovascular (heart and arteries/veins) and respiratory efficiency
• Decreased risk of coronary heart disease
• Changes in body metabolism, e.g. losing weight
• Delaying the physiological effects of age
• Reduction in stress, increase in self-confidence, etc.
There are several components of physical fitness and each is defined below.
STRENGTH
The capacity of a muscle to exert a force against resistance. Strength contributes to power and speed.
MUSCULAR ENDURANCE
The capacity to exert a force repeatedly over a period of time, e.g. it is the muscular endurance of
your legs to carry you 10 km without stopping.
FLEXIBILITY
The range of motion of your joints. Improving flexibility involves the stretching of muscles and
tendons to maintain or increase suppleness, and it provides increased resistance to muscle injury or
soreness.
CARDIO-RESPIRATORY ENDURANCE
The most essential component of physical fitness. It is the efficient functioning of the heart and
lungs.
AEROBIC FITNESS
Is an exercise of relatively low intensity and long duration, which depends primarily on the aerobic
energy system. Aerobic means "with oxygen", and refers to the use of oxygen in the body's metabolic
or energy-generating process. Many types of exercise are aerobic, and by definition are performed at
moderate levels of intensity for extended periods of time.
ANAEROBIC TRAINING
Is an exercise intense enough to trigger anaerobic metabolism. This means “without oxygen” and
is the output of energy when the oxygen supply is insufficient to meet the body’s long term energy
demands. (For example, a 100 meter sprint.)
7
OXYGEN UPTAKE
The effort that you can exert over a prolonged period of time is limited by your ability to deliver
oxygen to the working muscles. Regular vigorous exercise produces a training effect that can increase
your aerobic capacity by as much as 20 to 30%. An increased VO2 Max indicates an increased ability
of the heart to pump blood, of the lungs to ventilate oxygen, and of the muscles to take up oxygen.
THE TRAINING THRESHOLD
This is the minimum level of exercise which is required to produce significant improvements in any
physical fitness parameter.
OVERLOAD
This is where you exercise above your comfort level. The intensity, duration and frequency of exercise
should be above the training threshold and should be gradually increased as the body adapts to the
increasing demands. As your fitness level improves, the training threshold should rise. Working
through your program and gradually increasing the overload factor is important.
PROGRESSION
As you become more fit, a higher intensity of exercise is required to create an overload and therefore
provide continued improvement.
SPECIFICS
Different forms of exercise produce different results. The type of exercise that is carried out is specific
to the muscle groups being used and to the energy source involved. There is little transfer of the
effects of exercise, i.e. from strength training to cardiovascular fitness. That is why it is important to
have an exercise program tailored to your specific needs.
REVERSIBILITY
If you stop exercising or do not do your program often enough, you will lose the benefits you have
gained. Regular workouts are the key to success.
WARM-UP
Every exercise program should start with a warm-up where the body is prepared for the effort to
come. It should be gentle and preferably use the muscles group to be involved later. Stretching
should be included in both your warm-up and cool down, and should be performed after 3-5
minutes of low intensity aerobic activity or calisthenic type exercise.
WARM DOWN OR COOL DOWN
This involves a gradual decrease in the intensity of the exercise session. Following exercise, a large
supply of blood remains in the working muscles. If it is not returned promptly to the central
circulation, pooling of blood may occur in the muscles.
8
HEART RATE
As you exercise, your heart beat increases. This is often used as a measure of the required intensity of
an exercise. You need to exercise hard enough to condition your circulatory system, and increase your
pulse rate, but not enough to strain your heart.
Your initial level of fitness is important when developing an exercise program for you. When starting,
you can get a good training effect with a heart rate of 110-120 beats per minute (BPM). If you are
more fit, you will need a higher threshold of stimulation.
To begin with, you should exercise at a level that elevates your heart rate to about 65 to 70% of your
maximum. If you find this is too easy, you may want to increase it, but it is better to lean on the
conservative side.
As a rule of thumb, the maximum heart rate is 220 minus your age. As you increase in age, your
heart, like other muscles, loses some of its efficiency. Some of its natural loss is won back as fitness
improves. The following table is a guide to those who are “starting fitness.”
Age Target Heart Rate 25 3035404550556065
10 Second Count 23 2222212019191818
Beats per Minute
138 132 132 126 120 114 114 108 108
PULSE COUNT
The pulse count (on your wrist or carotid artery in the neck, taken with two index fingers) is done
for ten seconds, taken a few seconds after you stop exercising. This is for two reasons: (a) 10 seconds
is long enough for accuracy, (b) the pulse count is to approximate your BPM rate at the time you are
exercising. Since heart rate slows as you recover, a longer count isn’t as accurate.
The target is not a magic number, but a general guide. If you’re above average with your fitness, you
may work comfortably a little above that suggested for your age group. The following table is a guide.
Age Target Heart Rate 25 3035404550556065
10 Second Count 262625242322222120
Beats per Minute 156156150144138132132126120
Don’t push yourself too hard to reach the figures on this table. It can be very uncomfortable if you
over exercise. Let it happen naturally as you work through your program. Remember, the target is a
guide, not a rule, a little above or below is just fine.
Two final comments: (1) don’t be concerned with day to day variations in your pulse rate, being
under pressure or not enough sleep can affect it; (2) your pulse rate is a guide, don’t become a slave
to it.
9
MUSCLE SORENESS
For the first week or so, muscle soreness may be the only indication you have that you are on an
exercise program. This, of course, does depend on your overall fitness level. A confirmation that you
are on the correct program is a very slight soreness in most major muscle groups. This is quite normal
and will disappear in a matter of days.
If you experience major discomfort, you may be on a program that is too advanced, or you have
increased your program too rapidly.
If you experience PAIN during or after exercise, your body is telling you something. Stop exercising
and consult your doctor.
WHAT TO WEAR
Wear clothing that will not restrict your movement in any way while exercising. Clothes should be
light enough to allow the body to cool. Excessive clothing that causes you to perspire more than you
normally would gives you no advantage. The extra weight you lose is body fluid and will be replaced
with the next glass of water you drink. Always wear a pair of athletic shoes.
BREATHING DURING EXERCISE
Do not hold your breath while exercising. Breathe normally as much as possible. Remember,
breathing involves the intake and distribution of oxygen, which feeds the working muscles.
REST PERIODS
Once you start your exercise program, you should continue through to the end. Do not break off
halfway through and then restart at the same place later on without going through the warm-up stage
again. The rest period required between exercises may vary from person to person.
10
SUGGESTED STRETCHES
Head Rolls
Rotate your head to the right for one count while feeling the stretch
up the left side of your neck. Next, rotate your head back for one
count, stretching your chin to the ceiling. Rotate your head to the
left for one count, and finally, drop your head to your chest for one
count.
Shoulder Lifts
Lift your left shoulder up toward your ear for one count. Then lift
your right shoulder up for one count as you lower your left shoulder.
Side Stretches
Open your arms to the side and continue lifting them until they are
over your head. Reach your left arm as far upward as you can for one
count. Feel the stretch up your left side. Repeat this action with your
right arm.
Quadriceps Stretch
With one hand against a wall for balance, reach behind you and pull
your left foot up. Bring your heel as close to your buttocks as possible.
Hold for 15 counts and repeat with right foot up.
11
SUGGESTED STRETCHES
Inner Thigh Stretch
Sit with the soles of your feet together with your knees pointing
outward. Pull your feet as close into your groin as possible. Gently
push your knees towards the floor. Hold for 15 counts.
Toe Touches
Slowly bend forward from your waist, letting your back and
shoulders relax as you stretch toward your toes. Reach down as far
as you can and hold for 15 counts.
Hamstring Stretches
Sit with your right leg extended. Rest the soles of your left foot
against your right inner thigh. Stretch toward your toes as far as
possible. Hold for 15 counts. Relax and then repeat with left leg
extended.
Calf/Achilles Stretches
Lean against a wall with your right leg in front of the left and your
arms forward. Keep your left leg straight and the right foot on the
floor; then bend the right leg and lean forward by moving your hip
toward the wall. Hold, then repeat on the other side for 15 counts.
12
ASSEMBLY INSTRUCTIONS
13
STEP 1
Assemble the Front Frame (A) and Front
Foot Tube (D) with Truss Hex Screw (K01)
and Spring Washer (K02).
STEP 2
Connect the guide wires from the Front Frame (A) to the
Rear Frame (B), then screw the Front Frame (A) and to the
Rear Frame (B) with Truss Hex Screw( K03) and Spring
Washer (K04), then tighten firmly.
14
STEP 3
Assemble the Rear Foot Stabilizer (C) and the
Rear Frame (B) with Truss Hex Screw (K05) and
Spring Washer (K06).
STEP 4
Connect the wiring from the Right
Handlebar (N), to the Rear Frame
(B), and then attached the right
handlebar to the rear frame with
Hex Screws (K07) and Spring
Washers (K08). Do the same for the
Left Handlebar (M). Finally, place
the Cup Holders (P) into there
respective casings on the handlebars.
15
STEP 5
Attached the Back-pad Tube (I) onto the Rear Frame (B) with Flat End Hex Screws (K09) and
Spring Washers (K10). Then attach the Seat-pad (J) and Back-pad (H) onto the Back-pad Tube
(I) and Rear Frame (B) with Truss Hex Screws (K11), Spring Washers (K10) and Flat Washers
(K12). Finally, attach the Back-pad Decorative Cover (R) and tighten with Screws (K22).
16
STEP 6
Attach the Control Tube Decorative Cover (O) onto Control Tube (F). Then thread the lower
control wires from the Front Frame (A) through the Control Tube (F). Then attach the Control
Tube (F) and Front Frame (A) with the Truss Hex Screws (K13), Spring Washers (K14) and Flat
Washers (K21), then tighten firmly. Attached the Handrail Tube (E) to the Control Tube (F)
with Truss Hex Screws (K16), Spring Washers (K14) and Flat Washers (K15). Connect all wires
from the Console (G) with the wires you threaded through the control tube. Then attach the
Console (G) to the Control Tube (F) with Truss Phillips Screw (K17). Then assemble the left &
right foot pedals (L, K). Each foot pedal is labeled with the "L" and "R" for left and right, please
make sure you are attaching the correct pedal onto the correct side.
17
CONSOLE OPERATIONS
SPECIFICATIONS:
ENTER
To confirm all setting values
RESET
To reset all parameters to default value
START/STOP
To start or stop training
UP
To make upward setting change
DOWN
To make downward setting change
RECOVERY
In stop or start mode, pressing this button will start Heart Rate recovery status measurement. Time will count down from 60 seconds
QUICK START Starts the machine without any preset program or data from user
FUNCTION:
TIME SPEED DISTANCE PULSE CALORIES RPM
18
Displaying the workout time while exercising
Displaying the current speed
Accumulating the distance while exercising
30-240 BPM
Counts calories while exercising
Displaying crank speed in revolution per minute
POWER MODE
When the machine powers on, the display will light up with all numerals. After two seconds,
it will enter the "user selecting" mode. If the user does not operate the machine, or the
machine receives no signal after 4 minutes, the computer will enter an idol mode.
GETTING STARTED - OPERATING PROCEDURE:
Start pedaling and the console will turn on. Use the UP/DOWN buttons to set up your
user data by selecting any user U0-U4. Press the ENTER button to accept user selection.
Press UP/DOWN buttons to toggle between genders. Press ENTER to accept. Use the UP/
DOWN to set AGE then press ENTER. Use the UP/DOWN buttons to enter height in
inches then presss ENTER to accept. Use the UP/DOWN buttons to input weight then
press ENTER to select. See below for step by step instructions.
1. Press ENTER to confirm the USER, then enter the sex setting. The right side will
displays SEX, use the UP/DOWN buttons to choose male or female.
2. Press ENTER to confirm the gender selection, then enter the AGE setting. The right side
will display AGE, use the UP/DOWN buttons to select age setting.
19
3. Press ENTER to confirm the AGE setting, then enter the HEIGHT setting. The right
side will display HEIGHT, use the UP/DOWN buttons to select the HEIGHT setting.
4. Press ENTER to confirm the WEIGHT setting, then enter WEIGHT setting. The right
side will display WEIGHT, use the UP/DOWN buttons to select the WEIGHT value.
5. Press ENTER to confirm the HEIGHT setting, then enter the exercise program selecting
page. Use the UP/DOWN buttons to select between the exercise programs below.
MANUAL
PROGRAM
FITNESS
WATT
PERSONAL
HRC
RANDOM
20
NAVIGATING THE PROGRAMS
MANUAL MODE
User may preset their own resistance level from 1 to 24 by pressing the UP/DOWN buttons.
The default resistance level is 1. Press ENTER to confirm. Using the UP/DOWN buttons
enter values for TIME, DISTANCE, CALORIES, PULSE, and then press START to begin
your workout.
PROGRAM MODE
There are 12 preset programs. Use the UP/DOWN buttons to select the desired program
profile, then press the ENTER button to confirm. Use the UP/DOWN buttons to adjust
the resistance level. Press ENTER to confirm. Enter values for TIME, DISTANCE,
CALORIES, PULSE, and then press START/STOP to begin your workout.
FITNESS TEST
Use the UP/DOWN buttons to select FITNESS and press ENTER. Press START/STOP to
start the test. The user has to achieve the greatest distance possible in 8 minutes. When the
time is up, the electronic device will work out the difference and your fitness rating will be
displayed up on the screen.
PERSONAL MODE
Users may create their own profile in this mode. The first segment of the profile will start
blinking. Use the UP/DOWN buttons to adjust resistance level for each segment. Once all
16 segments have been entered, press the ENTER button to confirm. Press START/STOP
to begin your workout.
WATT CONTROL MODE
Enter values for TIME, DISTANCE, CALORIES, PULSE, and then press START/STOP
to begin your workout. User may set the Watt value by pressing the UP/DOWN buttons to
change in 10 Watt increments.
HRC MODE
Input personal data: SEX, AGE, HEIGHT and WEIGHT.
User may select different target Heart Rate from 55%, 75%, 90% and TARGET by using the
UP/DOWN buttons. Press ENTER to confirm. Then, enter values for TIME, DISTANCE,
CALORIES, and then press START/STOP to begin your workout.
21
PRESET PROGRAMS
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
HRC PROGRAMS (55%, 75%, 90%, TAG)
HRC 55%
HRC 75%
HRC 90%
HRC Target Heart Rate
TEST FUNCTIONS
RECOVERY TEST
Press RECOVERY key to test HRC recovery speed. When in test mode, it will detect the
HRC within 10 seconds. When finished, if there is no HRC displayed, the program will exit
out of the HRC recovery mode. If there is HRC displayed, the workout will enter into 60
22
seconds HRC recovery. Test result is shown below:
VALUE
F1
F2
F3
F4
F5
F6
CONDITION
Best
Very good
Good
Normal
Bad
Worse
FITNESS TEST
Enter FITNESS program and start the test. Test time is 8 minutes. Test result is below:
VALUE
F1
F2
F3
F4
F5
CONDITION
Very Good
Good
Fair
Poor
Very Poor
FUNCTION STATISTICS AND RANGES
ITEM
1
2
3
SCREEN SHOWN
SEX
AGE
WEIGHT(METRIC)
RANGE
SETTING RANGE PRESET VALUE
MALE/ FEM
10 - 100
20 - 330(Lb)
10 - 150 (KG)
SAVE
yes
yes
yes
23
4
HEIGHT
5
6
7
8
9
10
11
12
TIME
DISTANCE
CALORIES
SPEED
PULSE
WATT
RPM
BRAKE RESISTANCE
LEVEL
0:00 - 99:59
0.0 - 99.99
0 - 999
0.0 - 99.9
30 - 200 bpm
0 - 999
0 - 250 rpm
36 - 84(INCH)
90 – 21 0(CM)
0:00 - 99:00
0.0 - 99.50
0 - 990
L1 - L24
yes
0:00
0.0
0
0.0
0
0
0
L1
no
no
no
no
no
no
no
no
“WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result
in serious injury or death. If you feel faint stop exercising immediately.
24
DOWNLOADING APPS AND
PAIRING YOUR DEVICE WITH YOUR EQUIPMENT
DOWNLOADING THE SOFTWARE
Connect the Apple device with the App Store (iTunes) or your Android Device with Google
Play, search for "Pafers", then read the APP introductions and Download the APPs with
bicycle/elliptical machine functions to your device, for example Pedal Monitor or other
applicable apps. Note: if you download an APP for a treadmill and pair it with an Elliptical it
will not work.
• The App uses bluetooth mode, so please make sure the recumbent and device you are
using has bluetooth function.
• The App contains the following functions, the user must open the 3G network or wi-fi
network:
(a) Managing Data - After completing the registration in the "Pafers" App, log on to your
personal account. Now that you have registered you can record all of your workout data and
save it to your device.
(b) Some APPs need connection to Google maps in order to function correctly.
PAIRING THE BLUETOOTH DEVICE WITH AN APPLE DEVICE
1. Place the Apple Device on the area in front of the LCD screen.
2. Enter into settings and turn Bluetooth on.
3. Your Apple Device will detect all Bluetooth devices within range (following on screen
instructions), click on the appropriate bluetooth device name and confirm your
connection.
4. After paired successfully, please start the APP within 2 minutes, if you do not, Bluetooth
will automatically cancel the pairing. Please keep the Apple Device within a range of 2
meters for best quality connection. If you see “not connected,” please perform the above
steps again.
5. Press the Apple Device home button, the screen will return to the desktop.
6. Start the APP you downloaded. When the APP connects with the equipment successfully,
the APP screen buttons will unlocked. Start from APP interface using a variety of modes
to control the exercise equipment. Pay attention to the APP instructions and function
introduction. If you have need help with the APP, please browse the APPs download
page description or contact Pafers for instructions.
7. When you are done using the APP, please press the HOME button on the Apple Device
twice to close the APP.
25
PAIRING THE BLUETOOTH DEVICE WITH AN ANDROID DEVICE
1. Place the Android Device on the area in front of the LCD screen.
2. Enter into settings and turn Bluetooth on.
3. Your Android Device will detect all Bluetooth devices within range (following on
screen instructions), click on the appropriate bluetooth device name and confirm your
connection.
4. After paired successfully, please start the APP within 2 minutes, if you do not, Bluetooth
will automatically cancel the pairing. Please keep the Android Device within a range of 2
meters for best quality connection. If you see “not connected,” please perform the above
steps again.
5. Press the Apple Device home button, the screen will return to the desktop.
6. Start the APP you downloaded. When the APP connects with the equipment successfully,
the APP screen buttons will unlocked. Start from APP interface using a variety of modes
to control the exercise equipment. Pay attention to the APP instructions and function
introduction. If you have need help with the APP, please browse the APPs download
page description or contact Pafers for instructions.
7. When you are done using the APP, please press main screen button on the Android
Device twice to close the APP.
COMPATIBLE DEVICES
Android
Bluetooth & App Enabled Android Device
Apple Products
iPod touch (4th generation)
iPod touch (3rd generation)
iPhone 5iPhone 4S
iPhone 4Mini iPad
iPad iPad 2
i.Concept Bluetooth products are compatible with Apple devices with iOS 5.1 or later. It is
recommended to update iOS to latest version to obtain the best user experience.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch, is a registered
trademark of Apple, Inc., in the United States and other countries.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been
26
certified by the developer to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessorywith iPod, iPhone, or iPad may affect wireless
performance. iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
MAINTENANCE AND CLEANING
Care has been taken to assure that your equipment has been properly adjusted and
lubricated at the factory. It is not recommended that the user attempt service on the internal
components. Instead, seek service from an authorized service center. However, you may
clean the outer surface. Use a soft cloth, dampened with warm water. Do not use aerosol
sprays or pump bottles as they may deposit sediments upon the console surface. The use
of harsh chemicals will destroy the protective coating and cause a static build-up that may
damage the some of the components.
27
EXPLODED VIEW DRAWING
28
PARTS LIST
To order replacement parts: provide your customer service representative with the product model
number and the part number located on the Parts List below, along with the quantity you require.
No.
(A)
A01
A02
A03
A04
A05
A06
A07
A08
A09
A10
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
A41
A44
A46
A47
A48
A49
(B)
B01
B02
B03
(C)
C01
C02
C03
C04
C05
C06
(D)
D01
D02
D03
D04
D05
D06
D07
Description
Frame and fittings
Front frame assembly
Rear frame assembly
Bearing 6203zz
Left & right foot pedal set
Belt wheel (big) φ310
Belt 51”x6 grooves
Hex screw m8xp1.25X15
Nut m8xp1.25
Flywheel φ260
Steel rope fixing plate
Small motor
Screw m5xp0.8X40
Nut m5xp0.8
Steel rope
Screw m5xp0.8X10
Sensor fixing base
Screw m4xp0.7X10
Front stabilizer φ75x99x2.0Tx440
Movable wheel fixing plate C
Movable wheel fixing plate D
Screw m5xp0.8X10
Rear stabilizer φ75x99x2.0Tx520
Hex nut m8xp1.25 (Nhs-8125)
Adjustment foot pad 3/8”x29mm (16 teeth)
Screw nut 3/8”-16 teeth
Wheel #032
CKS hex screw m8xp1.25X40
Left stabilizer end cap
Right stabilizer end cap
Wire clip fixing knob uc-1
Wire clip fixing knob uc-1.5
Cross screw m4xp0.7X10
Lower control wire
Hand grip pulse wire middle A
Hand grip pulse wire middle B
Speed sensor wire
Power suppling wire
Right sticker (right)
Screw nut 3/8”-26 teeth
Hex screw nut 3/8”-26 teeth x4t
Hand grip quick connecting wire
Hand grip quick connecting wire A
Hbc1-b1001 control tube set
Control tube assembly
Computer handrail tube assembly
End cap φ1-1/4”x1.5T
Crank set
Crank assembly
C shaped ring φ17
Left and right crank
Hexagon washer screw m8xp1.25X25
Wave washer φ17xφ24x0.3T
Crank shaft interval tube
Idle wheel set
Idle wheel assembly
Idle wheel φ48xφ10x23.5T
C shaped ring φ10
Wave washer φ10.5Xφ14.5X0.3T
Spring A
Hex screw m8xp1.25X25
Washer φ8xφ16x1.5T
Qty
1
1
1
2
1
1
1
4
4
1
1
1
4
4
1
2
1
1
1
2
2
8
1
4
5
5
2
2
2
2
4
2
6
1
1
1
1
1
2
2
2
1
1
1
1
1
4
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
No.
D08
(E)
E01-1
E02
E03
E04
E07
E08-1
E09
E10
E11
E12
E13
E14
E15
E16
E17
E18
E19
E20
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E43-1
E43-2
E43-3
E43-4
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
(F)
F01
F02
F03
Description
Nut m8xp1.25
Seat set
Seat assembly a
Seat assembly B
Seat pad
Back pad
End cap
Adjustment handlebar
Brake iron plate
Fixing screw fixing plate
Magnet φ4.7X2.8
Brake iron plate B
Brake iron plate C
Fixing screw m8xp1.0X25
Washer φ8xφ19x3.0T
Nut m8xp1.25
Flat washer
Sleeve cover
CKS hex screw m8xp1.25X65
Washer φ8xφ16x1.5T
Nut m8xp1.25
Drawing spring
Brake plate bushing
Fixing screw m6xp1.0X36.8L
Nut m6xp1.0
Brake palte fa119 (with no-1821a)
Slide
Hex screw m8xp1.25X20
Spring washer m8
Seat baffle
CKS hex screw m10xp1.5X15
Brake iron plate assembly
Hex screw m6xp1.0X12
Washer φ6xφ12x1.5T
Slipping block
Inner sleeve cover L
Inner sleeve cover R
Hex screw m8xp1.25X30
Spring washer m8
Base assembly C
Seat tube bushing
Screw bushing E
Cylinder assembly
Cylinder 350n
Handle
Handle fixing plate
Handle fixing plate A
Seatback cover
Hex screw m10xp1.5X90
Washer ψ10xψ20x1.5T
Spring washer m10
Nut m10xp1.5
Hex screw m8xp1.25X35
Washer φ8xφ16x1.5T
Spring washer m8
Nylon nut m8xp1.25
Round head cross screw m4xp0.7X8
Spring washer m4
Hbc1-q1004 handrail tube set
Handrail tube assembly L
Handrail tube assembly R
Handlebar A
Qty
1
1
1
1
1
1
2
1
2
1
2
2
1
3
1
3
6
2
1
2
1
1
2
2
2
2
2
6
6
2
4
1
6
6
4
2
2
8
8
1
1
1
1
1
1
1
1
1
1
2
1
1
2
2
1
2
4
4
1
1
1
2
No.
(G)
G01
G02
G03
G04
G05
G06
G07
G08
G09
G10
G11
(H)
(I)
I01
I02
I03-1
I04-1
I05
I06
I07
I08-1
I09
(K)
K01
K02
K03
K04
K05
K06
K07
K08
K09
K10
K11
K12
K13
K14
K15
K16
K17
K18
K19
K20
K21
K22
(L)
L01
L02
L03
Description
Handgrip pulse set
Handgrip pulse cover (long) with no-3601
Handgrip pulse cover
Handgrip key board
Self-tapping screw φ2x5
Screw m3xp0.5X25
Handgrip sticker (l)
Film key-right 2 keys
Lower hand grip pulse wire
Right sticker (right)
Self-tapping screw #8x5/8”
Hand grip quick connecting wire lower
Hed7-t1004 computer
Computer (5”lcd display with board )
Wireless pulse receiver
Wireless pulse receiver
Bluetooth module
Plastic fittings
Left front cover
Right front cover
Left rear cover
Right rear cover
Slide
Control tube decorative cover
Screw m5xp0.8X10
Self-tapping screw φ4x15
Self-tapping screw φ4x10
Hbc1-y1006 screw bag
Hex screw m8x30
Spring washer m8
Hex screw m12x20
Spring washer m12
Truss hex screw m8x30
Spring washer m8
CKS hex screw m6x12
Spring washer m6
Flat head hex screw m8x60
Spring washer m8
Hex screw m8x15
Washer ø8xø16x1.5T
Hex screw m8x20
Spring washer m8
Washer ø8xø16x1.5T
Hex screw m8x30
Screw m5x12
L shaped hex wrench 8mmx55mmx110mm
L shaped hex wrench + cross screwdriver
Opened wrench 13mm+15mm
Washer ø8xø19x3t
Truss cross screw m6x15
Attachments
Waterbottle holder
Belt 4.8X330mm black
Power supplier
ø=Diameter
Qty
1
2
2
1
1
4
1
1
2
1
4
1
1
1
1
1
1
1
1
1
1
1
2
1
10
12
4
1
2
2
4
4
2
2
8
8
4
12
8
8
3
5
2
2
2
1
1
1
3
4
1
2
5
1
29
WARRANTY
LIMITED LIGHT COMMERCIAL WARRANTY
BH North America will repair or replace, free of charge, at its option, parts that are
defective as a result of material or workmanship. Seven (7) year replacement warranty
coverage on frame and five (5) years on other parts. Labor warranty coverage is one (1)
year. Warranty covers the original consumer purchaser only.
LIMITED RESIDENTIAL WARRANTY
BH North America will repair or replace, free of charge, at its option, parts that are
defective as a result of material or workmanship. Lifetime replacement warranty coverage
on frame and ten (10) years on other parts. Labor warranty coverage is two (2) years.
Warranty covers the original consumer purchaser only.
THIS WARRANTY DOES NOT COVER
• Pre-delivery set-up.
• Components that require replacement due to dirt or lack of regular maintenance.
• Expendable items which become worn during normal use.
• Repairs necessary because of operator abuse or negligence or the failure to operate
and maintain the equipment according to the instructions contained in the Owner’s
Manual.
For more detailed warranty information or to register your product warranty easily
online, visit our website at: www.BHFitnessUSA.com
FOR WARRANTY REPAIRS, PLEASE DO NOT TAKE YOUR MACHINE
BACK TO THE RETAIL STORE. CONTACT BH FITNESS FIRST.
BH North America Corporation
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949.206.0330; Toll Free: 866.325.2339; Fax: 949.206.0013
Web: www.BHFitnessUSA.com
Mon - Fri 8am - 5pm PST
30
Download PDF