Cypress | CLUX-H2SDI | Specifications | Cypress CLUX-H2SDI Specifications

CLUX-H2SDI
HDMI to 3G SDI Dual-Output Converter
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VR0
04/01/11
Preliminary release
VR1
04/07/11
Supported timing added
VR2
28/09/11
Spec. Position Changed
VS3
11/07/12
Updated format/diagrams/SDI
standards
VS4
13/07/12
First release
VR5
24/07/12
SDI supports 480i@59.94
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Front Panel���������������������������������������3
6.2 Rear Panel�����������������������������������������4
6.3 EDID Update Procedure������������������5
6.4 LED Signal Chart�������������������������������7
7. Connection Diagram�������������������������� 10
8. Specifications�������������������������������������� 11
9. Acronyms��������������������������������������������� 12
1. INTRODUCTION
The HDMI to SDI Converter allows HDMI signals to be shown on two SDI
displays while ensuring high bit rates of 2.970 Gbit/s to give you high
resolution signal without any loss. For professionals this means that it is
now easier to convert your high def HDMI signal with audio to SDI for
long distance transmission and display your work on two SDI displays.
Also, a 2 CH L/R audio input allows DVI signal with 2CH audio to be
converted to SDI in order to be shown on SDI displays. Furthermore,
the device has a built-in default EDID and a recordable EDID that
guarantee image display compatibility with source equipment.
2. APPLICATIONS
• HDMI signal display on SDI display(s)
• Extending a HDMI signal over 100m to two SDI displays
• DVI signal with audio display on SDI display(s) (DVI to HDMI adaptor
cable required)
• Cascade HDMI signal over SDI cables
3. PACKAGE CONTENTS
• HDMI to 3G SDI Dual-Output converter
• 5 V/2.6 A Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Input HDMI/DVI (with audio signal) source equipment with
connection cable(s).
• Output SDI display(s) or SDI to HDMI converter(s) with connection
cable(s).
1
5. FEATURES
• Shows HDMI source on two SDI displays simultaneously
• SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
• Converts HDMI signal to SDI:
1. 480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
2. 720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or
1.485/1.001 Gbit/s)
3. 1080p to 3G-SDI (SMPTE 424M/425M-AB, at bitrates of
2.970 Gbit/s and 2.970/1.001 Gbit/s)
• Supports HDMI input timings: 480i@59.94, 576i, 720p@50/59.94/60,
1080i@50/59.94/60, 1080p@23.98/24/25/29.97/30/50/59.94/60
• Choose between a selectable EDID and recordable EDID
• Integrated audio embedded up to 8 CH PCM 48 kHz for HDMI or 2
CH (external L/R) for DVI audio
• Supports SDI output distance up to 100 meters (3G-SDI), 200 meters
(HD-SDI), or 300 meters (SD-SDI)
Note:
1. Tested with Belden 1694A Cable. Operating distances may vary if
used with cables of different specifications.
2. This product does not process HDCP encrypted input signals. There
will be no video output when the input signal contains content
that is HDCP encrypted.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
4 5 7 8
EDID
Update
3G
HD
3G SDI
SD
HD EDID
3G EDID
2
Out 1
CLUX-H2SDI
HDMI to 3G SDI
HDMI/DVI
Video Lock
1
3 6
Out 2
9
1 EDID Switch: Use this switch to select between the built-in or to
update the EDID settings. Default EDID settings as shown below:
3G EDIDNative Mode 1080p@60
HD EDIDNative Mode 1080i@60
EDID updateNative Mode 720p@60
2 EDID Update button: Only use this function when the image has
not displayed correctly after trying to switch the EDID Update/
HD/3G mode with the EDID switch (refer to Section 6.3 for update
procedure).
3 HDMI/DVI LED: The LED will illuminate green only when the input
source is HDMI. It will not illuminate when the input is DVI.
4 Video Lock LED: The LED will illuminate yellow when the HDMI input
is receiving and locking a signal.
5 EDID Update LED: The LED will illuminate red when the EDID settings
are being updated (refer to Section 6.4 LED Signal Chart).
6 SD LED: The LED will illuminate green when the HDMI input signal is
480i/576i.
7 3G LED: The LED will illuminate red when the HDMI input signal is
1080p@50/60.
8 HD LED: The LED will illuminate yellow when the input HDMI input
signal is 1080p@24/25/30, 1080i@50/60 or 720p@50/60.
3
9 3G SDI Out 1 & 2: Connect to up to 2 SDI TVs or monitors for
mirrored display or to a SDI to HDMI converter to cascade the SDI
signal to multiple displays or devices
6.2 Rear Panel
Audio In
HDMI In
Power
DC 5V
Audio SW
HDMI
1
R/L
2
R
L
3
4
5
1 HDMI In: Connect to the HDMI source equipment such as DVD or
Blu-ray player or it can also be connected to a DVI source (with
DVI to HDMI Adaptor cable).
2 Audio Switch: Use this switch to select between HDMI audio or an
external analogue stereo source (R/L RCA jack).
3 Audio In R/L:Connect to an audio source such as a DVD or Blu-ray
player with R/L RCA jack output or an alternate audio source such
as a PC/Notebook. Can be used to provide audio for a DVI input.
4 Power LED: The LED will illuminate when the device is connected to
a power supply.
5 DC 5V: Plug the 5 V DC power supply into the Converter and
connect the adaptor to an AC outlet.
4
6.3 EDID Update Procedure
Please follow this procedure if there is no image displayed or it is
displayed incorrectly.
A. Please ensure that the display output settings of the source input
device (such as a Blu-ray player or HD Camcorder) is set to
“Automatic”. If the source image is displayed correctly no further
action is necessary but if not to step B.
DVD Player
HDMI
Converter
SDI
SDI Monitor
B. Connect the HDMI source directly (without connecting to the
Converter) to a HDMI monitor or TV to see if the image is displayed
correctly. Ensure that the source's output timing supports SDI or the
Converter's timing. If it is supported, go to step C. If not, please try
a different monitor or TV and adjust the timing until the image is
displayed correctly.
Adjust to correct SDI Timing
DVD Player
(HDMI Cable)
HDMI
TV/Monitor
C. Connect the HDMI monitor or TV to the input port of the Converter
and then set the EDID switch to the 'EDID update' position. Press
and hold the EDID update button consistantly until the Video Lock
LED illuminates. This will allow the Converter to replace the default
EDID settings with the monitor/TV’s EDID settings.
Converter
5
1. Move the EDID switch to EDID update position
2. Press and hold the EDID update button
(HDMI Cable)
HDMI
TV/Monitor
D. Finally, connect the HDMI source to the HDMI input of the
Converter and connect the output to a SDI monitor which should
now be correctly displaying the image.
DVD Player
HDMI
Converter
SDI
SDI Monitor
6
6.4 LED Signal Chart
System Operation LED Signal Status
●
●
●


Input timing is 3G, HDMI mode

●
●


Input timing is HD, HDMI mode
●

●


Input timing is SD, HDMI mode
●
●
●
●


Input timing no support , HDMI mode

●
●
●

●
Input timing is 3G, DVI mode

●
●

●
Input timing is HD, DVI mode
●

●

●
Input timing is SD, DVI mode
●
●
●
●

●
Input timing no support , DVI mode

Input timing is 3G, HDMI mode
No.
Switch
key
3G
/DVI
HDMI
/Lock
Video
Update
EDID
SD
Signal LED
HD
EDID
1
3G
Not Pressed

2
3G
Not Pressed
●
3
3G
Not Pressed
●
4
3G
Not Pressed
5
3G
Not Pressed
6
3G
Not Pressed
●
7
3G
Not Pressed
●
8
3G
Not Pressed
Description
9
HD
Not Pressed

●
●
●

10
HD
Not Pressed
●

●
●


Input timing is HD, HDMI mode
11
HD
Not Pressed
●
●

●


Input timing is SD, HDMI mode
12
HD
Not Pressed
●
●
●
●


Input timing no support , HDMI mode
13
HD
Not Pressed

●
●
●

●
Input timing is 3G, DVI mode
14
HD
Not Pressed
●

●
●

●
Input timing is HD, DVI mode
15
HD
Not Pressed
●
●

●

●
Input timing is SD, DVI mode
16
HD
Not Pressed
●
●
●
●

●
Input timing no support , DVI mode
17
Update
Not Pressed

●
●
●


Input timing is 3G, HDMI mode
18
Update
Not Pressed
●

●
●


Input timing is HD, HDMI mode
19
Update
Not Pressed
●
●

●


Input timing is SD, HDMI mode
20
Update
Not Pressed
●
●
●
●


Input timing no support , HDMI mode
21
Update
Not Pressed

●
●
●

●
Input timing is 3G, DVI mode
22
Update
Not Pressed
●

●
●

●
Input timing is HD, DVI mode
23
Update
Not Pressed
●
●

●

●
Input timing is SD, DVI mode
24
Update
Not Pressed
●
●
●
●

●
Input timing no support , DVI mode
25
Update
Not Pressed
●
●
●
●
●
●
No input signal or No connect
26
3G
Not Pressed
●
●
●


●
Input with HDCP Encryption
27
HD
Not Pressed
●
●
●


●
Input with HDCP Encryption
28
Update
Not Pressed
●
●
●


●
Input with HDCP Encryption
7
Note
1. Key:
"" LED On
"●" LED Off
"" LED Flashing
2. Not all of HDMI timings can be converted to SDI, therefore selecting the default EDID
settings provides the HDMI source with output timing reference.
3. EDID switch mode/Default EDID setting:
3G  1080p@60
HD  1080i@60
Update  720p@60
4. Due to the fact that the HDMI default timing is mainly set to 480p, there is a possibility
that the image will not be displayed correctly as that timing is not supported by SDI . To
avoid this, set the HDMI source input output setting to “Automatic” so that the source
equipment will receive the native EDID settings of the display.
5. The EDID update procedure only needs to be done for Nos. 4,8,12,16,20 & 24. (please
refer to “EDID Update button”in section 6.3).
6. When the HDMI input source signal has content that is HDCP encrypted the EDID
Update and Video Lock LEDs will both flash, the other LEDs will not illuminate and no
image will be displayed.
8
EDID Update LED Confirmation Status
Switch
key
/DVI
HDMI
Lock
Video
Update
EDID
SD
Single LED
HD
EDID
3G
EDID
1
Update
Pressed On

●
●



3G Native, HDMI mode, Read OK
2
Update
Pressed On
●

●



HD Native, HDMI mode, Read OK
3
Update
Pressed On
●
●




SD Native, HDMI mode, Read OK
4
Update
Pressed On
●
●
●



No support timing, HDMI mode, Read OK
5
Update
Pressed On

●
●


●
3G Native, DVI mode, Read OK (Note4)
6
Update
Pressed On
●

●


●
HD Native, DVI mode, Read OK (Note4)
7
Update
Pressed On
●
●



●
SD Native, DVI mode, Read OK (Note4)
8
Update
Pressed On
●
●
●


●
EDID format error (Note5)
9
Update
Pressed On
●
●
●

●
●
No connection or connection error
No.
Description
Note
1. Key:
"" LED On
"●" LED Off
"" LED Flashing
2. Only when the EDID button is being pressed and hold consistantly will the EDID update
progress. When the update is complete the Video Lock LED will illuminate. If the button
is not pressed the LED will illuminate according to “System Operation LED Signal Status”.
3. The output HDMI source's output resolution is based on output display monitor/TV’s EDID
settings but results may vary with different sources. The EDID update function is designed
to resolve compatibility issue such as these.
4. When DVI EDID settings are detected, the system will check if the EDID’s native mode
supports SDI timing. If it does, the image will be displayed in the formats in No. 5,6 & 7.
If not, the system will automatically copy the default DVI EDID (Native 3G) mode and
displayed in the format in No. 5.
5. EDID format errors include: Header error, Checksum error and EDID error. Under this
condition the default EDID or the updated EDID will not be updated.
9
7. CONNECTION DIAGRAM
Alternative Audio Source
DVD or Blu-ray Player
HDMI
Output
Audio In
HDMI In
Power
DC 5V
Audio SW
HDMI
EDID
Update
3G
HD
HD EDID
3G EDID
SD
HDMI/DVI
Video Lock
R/L
R
Out 1
L
3G SDI
Out 2
Power
Supply
CLUX-H2SDI
HDMI to 3G SDI
SDI
Output
Video Audio HDMI/
Power Lock Lock DVI
SDI
Output
3G
HD
SD
Audio Out
R
HDMI Out
L
3GSDI to HDMI CLUX-SDI2HC
SDI to HDMI
Converter
HDMI
Output
SDI Display
HDMI Display
10
8. SPECIFICATIONS
SDI Transmission Rates
2.970 Gbps, 2.970/1.001Gbps, 1.485 Gbps,
1.485/1.001Gbps & 270 Mbps
Video Bandwidth
225 MHz/6.75Gbps
Input
1×HDMI, 1×Stereo Audio (R/L)
Output
2×BNC (SD/HD/3G-SDI)
HDMI Timing Support
480i@59.94, 576i, 720p@50/59.94/60
1080i@50/59.94/60
1080p@23.98/24/25/29.97/30/50/59.94/60
SD-SDI:
SMPTE 259M-C, 270 Mbit/s
HD-SDI:
SDI Timing Support
SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s
3G-SDI:
SMPTE 424M/425M-AB, 2.970 &
2.970/1.001 Gbit/s
SDI Cable Distance
3G/HD/3G-SDI up to 100 /200/300 meters
with BELDEN 1694A Cable
Power Supply
5 V DC/2.6 A (US/EU standards, CE/FCC/UL
certified)
ESD Protection
Human-body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions
125 mm (W)×115 mm (D)×30 mm (H)
Weight
275 g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0 °C~40 °C/32 °F~104 °F
Storage Temperature
−20 °C~60 °C/−4 °F~140 °F
Relative Humidity
20~90 % RH (non-condensing)
Power Consumption
5.5 W
Note: SDI supports SD resolutions of 480i@59.94 and 576i@50 only. If the input source is sending an incompatible resolution, this may cause problems with the image or no image to be displayed. Please ensure that the source device is set to output in a compatible resolution.
11
9. ACRONYMS
ACRONYM
COMPLETE TERM
3G
Bandwidth 2.97Gbps ≈ 3G
DVI
Digital Visual Interface
HDCP
High-bandwidth Digital Content Protection
HDMI
High Definition Multimedia Interface
SDI
Serial Digital Interface
12
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
Download PDF