ClearSounds | BTS001 | User`s manual | ClearSounds BTS001 User`s manual

BTS001
Stereo Bluetooth Speaker
User’s manual
„
1.
2.
„
1.
„
1.
2.
3.
4.
5.
6.
„
„
„
Brief introduction………………………………………………..…..1
Bluetooth wireless communication technology………………….…...1
About BTS001…………………………………………………….….1
Before use………………………………………………………...…..2
Overview…………………………………………………………...…2
Basic operation………………………………………………..….….2
Turning on/off BTS001…………………………………………….…2
Pairing BTS001 with Bluetooth devices………………….…….….…3
Music playback…………………………………………………....….4
Making calls with BTS001……………………………...………..…..6
The operation of BTS001………………………………………….…6
LED indicator…………………………….……………………….….8
Care and maintenance……………………………….……….…….8
FAQs……………………………………………………..…….…….8
Specifications…………………………………………….…….……9
Welcome to this stereo Bluetooth speaker, BTS001. Please read this user’s
manual carefully before use.
„ Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth
technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and other devices. The max transmission range of
class II is 10 meters while the max transmission range of class I can reach
up to 100 meters.
2. About the BTS001
BTS001 is a stereo Bluetooth speaker. It supports the following profiles:
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can listen to music wirelessly using the BTS001. It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP.
‹ Answer call, end call and reject call
‹ Redial last number
‹ Voice dial
‹ Adjust the volume
‹ Three-way calling
2) Pairing with a Bluetooth music device or Bluetooth transmitter
supporting A2DP.
‹ Enjoy music wirelessly
‹ Adjust the volume
‹ Remote control pause/play
‹ Remote control previous/next song
3) It is powered by the AC power adaptor or 6×AA alkaline batteries
When using indoors, you can use AC power adaptor to supply power.
‹ When using outdoors, you can use 6×AA alkaline batteries to supply
power.
‹
1
„ Before use
1. Overview
„ Basic operation
1. Turning on/off BTS001
Function
Turn on
BTS001
Turn off
BTS001
LED
indicator
Blue LED
flashes slowly
Red LED is on
and then off
Operation
Press and hold
button for 3-5 seconds
Press and hold
button for 2-3 seconds
Indication
tone
A string of
tones
A string of
tones
Remark: Every time the BTS001 is turned on, it will connect to the last
connected device automatically. If no device can be connected after 5
minutes, it will turn off automatically in order to save power.
2
2. Pairing the BTS001 with Bluetooth devices
How to enter pairing mode
Function
Status of BTS001
Operation
Just turned off
Press and hold
button for
Enter
3-5 seconds
pairing
Turned on and not
Short press
mode
button
connected to a
Bluetooth device
LED indicator
Red and blue
LEDs flash
alternately
Red and blue
LEDs flash
alternately
Remarks:
‹ Pairing mode will last 5 minutes, the BTS001 will turn off automatically
if no device can be connected after 5 minutes.
‹ You will hear 2 “Du” tones while entering pairing mode.
‹ When the BTS001 exits connection with a Bluetooth device or
disconnects to a Bluetooth device owing to exceeding effective range, it
will return to pairing mode automatically.
Pairing the BTS001 with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing
steps may vary with different cell phones. Please refer to your cell phone’s
user’s manual for further information. The general pairing steps are as
follows:
1) Keep BTS001 and your Bluetooth cell phone within 1 meter when
pairing;
2) Enter BTS001’s pairing mode (refer to “How to enter pairing mode);
3) Turn on your cell phone’s Bluetooth function and search for Bluetooth
devices. After the search is completed, select “BTS001” from the
Bluetooth device list;
4) According to the indication, enter password or PIN No:”0000”, and
press ”Yes” or “confirm”;
5) After successful pairing, select “BTS001” from the Bluetooth device list
and press “connect”;
6) After successful connection, the Blue LED of BTS001 will flash once
every 2 seconds.
Remarks:
If the pairing has failed, please switch off BTS001 first and then try
re-pairing according to steps 1~6 mentioned above.
‹
3
‹
‹
After pairing is successful, BTS001 and your cell phone will remember
each other, there is no need to re-pair at next use.
Every time the BTS001 is turned on, it will connect to the last connected
device automatically. If you want to pair it with other devices, please turn
off the Bluetooth function of the last connected devices first and then try
re-pairing with the new device according to steps 1~6 mentioned above.
Pairing the BTS001 with a Bluetooth transmitter
You can connect the BTS001 to a Bluetooth transmitter to enjoy music
wirelessly. Take the QLink Bluetooth transmitter for example. The pairing
steps are as follows:
1) Keep BTS001 and Bluetooth transmitter within 1 meter when pairing;
2) Enter BTS001’s pairing mode (refer to “How to enter pairing mode);
3) Turn on the Bluetooth transmitter. It will search for Bluetooth devices
automatically and send a pairing request;
4) When BTS001 requests to enter a PIN No., the transmitter will response
“0000” automatically;
5) After successful pairing and connecting, the blue LED of the BTS001
flashes once every 2 seconds.
Remarks:
The pairing password of BTS001 is “0000”. So, the BTS001 can only
pair with Bluetooth transmitters whose pairing password is “0000”, too.
‹ If pairing still fails after several tries, refer to the Bluetooth transmitter’s
user’s manual for further information.
‹
Multi-pairing
The BTS001 can connect to two Bluetooth devices at most. One is the cell
phone with HFP profile, the other one is the device with the A2DP profile. If
you want to finish the multi-pair, please refer to the following steps:
1) Firstly, pair the BTS001 with a Bluetooth transmitter (refer to “Pairing
BTS001 with a Bluetooth transmitter);
2) Turn off the Bluetooth transmitter;
4
3) Pair and connect the BTS001 with the Bluetooth cell phone (refer to
“Pairing BTS001 with a Bluetooth cell phone”);
4) Restart the Bluetooth transmitter, it will connect to the BTS001
automatically.
Remarks:
After multi-pairing is successful, the paired devices will remember each
other, and there is no need to re-pair at next use.
‹ For a cell phone that supports HSP and A2DP, it may establish HSP and
A2DP connection with BTS001 simultaneously. At this time, when
restarting the Bluetooth transmitter, it may not connect to BTS001.
‹
3. Music playback
1) Connecting to a Bluetooth A2DP cell phone or a Bluetooth transmitter
a) Make sure your cell phone or Bluetooth transmitter has already
established an A2DP connection with the BTS001.
b) You can listen to your music from the BTS001 while using your
Bluetooth cell phone or other Bluetooth music device for playback.
c) Adjust the volume: Short press VOL+ button and VOL- button to adjust
the volume.
button to pause music and press
button
d) Pause/play: Light press
once more to play music.
button to play previous song and
e) Previous/next song: Light press
press
button to play next song.
2) 3.5mm audio input
a) Connect your mp3 player using a 3.5mm to 3.5mm audio cable. One end
inserts into the input socket of the BTS001 and the other end inserts into
your music player’s headphone output.
b) You can listen to your music from BTS001 while playing music on your
music player.
Remarks:
‹ When the music is transmitted to the BTS001 using the input socket, you
can’t pause/play, play last /next song on the BTS001.
‹ If you plug in a music player to the input socket of the BTS001, the
Bluetooth function of the BTS001 is invalid. If you want to use the
Bluetooth function of the BTS001, you have to unplug the 3.5mm audio
cable.
5
‹
If you plug in a music player to the input socket of the BTS001 while it
connects with a Bluetooth device, the Bluetooth device will disconnect
from the BTS001. When you unplug the 3.5mm audio cable, the BTS001
will connect to the last Bluetooth device.
4. Making calls with the BTS001
When your cell phone is Bluetooth-enabled and set up with a HFP
connection with the BTS001, you can make calls and remotely control calls
using the BTS001.
1) Pair your cell phone with the BTS001. After successfully establishing an
HFP connection (Blue LED flashes once every 2 seconds), you can make
calls with the BTS001.
button for 1 second.
2) Redial last number: Press and hold
button to cancel calling.
3) Cancel calling: When calling, short press
button to answer call.
4) Answer call: When ringing, short press
button for about 2 seconds
5) Reject call: When ringing, press and hold
to reject call.
button to end call during a call.
6) End call: Short press
5. Operation of the BTS001
Function
Status of BTS001
Operation
Basic function
Turn on BTS001
Turn off BTS001
Press and hold
button
for about 3-5 seconds
Press and hold
button
for about 2-3 seconds
Turned off
Turned on
Redial last
number
During a
Light press VOL + button
call/playing music
During a
Light press VOL– button
call/playing music
Making calls with BTS001
Press and hold
button
Standby mode
for about 3 seconds
Cancel calling
Calling
Volume up
Volume down
Short press
6
button
Answer call
Reject call
Incoming ring
Incoming ring
Short press
button
Press and hold
button for about 2
seconds
Short press
button
twice
Microphone mute
During a call
Cancel mute
During a call
(microphone
mute)
Short press
twice
button
End call
During a call
Short press
button
Three-way calling
Reject a new
incoming call and
continue current
call
End current call
and answer a new
incoming call
Keep current call
and answer a new
incoming call
Switch between
two calls
End current call and
answer the keeping
call
There is a new
incoming call
Press and hold
button for 2 seconds
There is a new
incoming call
Short press
button
There is a new
incoming call
Short press
button
During a call
Short press
button
During a call
Short press
button
Music playback
Pause/play
Playing music
Light press
button
Previous song
Playing music
Light press
button
Next song
Playing music
Light press
button
7
6. LED indicator
LED indicator
Red and blue LEDs
flashes alternately
Blue LED flashes
once every 2 seconds
Red LED is on
Blue LED flashes
quickly
Status of BTS001
Pairing mode
Standby mode and connected to a Bluetooth
device/during a call
Music is transmitted to BTS001 by using the
input socket
Incoming call/calling
„ Care and maintenance
Read the following recommendations before using the BTS001. Following
these you will be able to enjoy our product for many years.
‹ Keep it dry and don’t take it to damp places to avoid the product’s
internal circuit being affected.
‹ Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
‹ Don’t expose the product to cold areas. It may damage the internal circuit
board.
‹ Don’t try to disassemble the product as it may get damaged if you are not
professional.
‹ Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
‹ Don’t use intensive chemical products or detergent to clean the product.
‹ Don’t scratch the surface with sharp things.
‹ Please take out the batteries from the product if you don’t use it for a
long time.
„ FAQs
1. What to do when the BTS001 can’t pair with Bluetooth device?
a) Make sure the BTS001 has entered pairing mode;
8
b) Ensure the BTS001 is in the effective working range;
c) Make sure the pairing password entered is “0000’ and ensure the
responding password of your Bluetooth transmitter also supports “0000”.
2. Why can’t the BTS001 play music when it connects to a Bluetooth
cell phone?
a) Make sure your Bluetooth cell phone supports A2DP profile;
b) Ensure your Bluetooth cell phone is in effective working range.
3. Why can’t I remotely control the pause, play, previous song and next
song functions with the BTS001 when playing music?
a) When the music is transmitted to the BTS001 using the input socket, you
can’t pause, play, play previous and next song on the BTS001;
b) This function needs the Bluetooth device paired with the BTS001 to
support AVRCP (Audio/Video Remote Control Profile). Please make sure
your cell phone or Bluetooth transmitter supports AVRCP.
4. How far is the effective range between the BTS001 and a Bluetooth
cell phone?
According to the Bluetooth standard, the max. controllable range of
Class2 Bluetooth product is 10 meters. It varies with different
environments and paired cell phones.
„ Specifications
Bluetooth version
Bluetooth profiles
Bluetooth frequency range
Operating distance
Power supply
Working temperature
Storage temperature
Dimensions
Weight
Bluetooth V2.1
HSF, HFP, A2DP and AVRCP
2.4GHz-2.4835GHz
10 meters, class II
Battery: AA 1.5V×6 (Not include)
or DC 9V
1.5A
Notes:
1) the DC cable is less than 3m.
2) the maximum input voltage is 10V.
-10~60
-20~70
215×52×75mm
255.6g
9
Notes:
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
10
Download PDF