Advantech | PCI-1720U | Specifications | Advantech PCI-1720U Specifications

Plug-In I/O Cards
10
ActiveDAQ Pro Introduction
10-2
10-4
Glossary
10-6
Data Acquisition and Control Tutorial & Software
10-8
Selection Guide
PCI-1710
100 kS/s, 12-bit, PCI-bus Multifunction Card
10-14
PCI-1711
100 kS/s, 12-bit, 16-ch S.E. Input Low-cost Multifunction Card
10-16
PCI-1712/PCI-1712L
1 MS/s, 12-bit, 16-ch High-speed Multifunction Cards
10-18
PCI-1716/PCI-1716L
250 kS/s, 16-bit, 16-ch High-resolution Multifunction Cards
10-20
PCI-1718
12-bit Multifunction Card with PCI Bus
10-22
PCI-1741U
16-bit Multifunction Card with PCI Bus
10-24
PCI-1742U
1 MS/s, 16-bit, 16-ch High-resolution Multifunction Card
10-26
PCL-711B/S
Analog and Digital I/O Card
10-28
PCL-812PG
MultiLab Analog and Digital I/O Card
10-29
PCL-818
High-performance Multifunction Card
10-30
PCI-1713
100 kS/s, 12-bit, 32-ch Isolated Analog Input Card
10-32
PCI-1715U
500 kS/s, 12-bit, 32-ch, Isolated Analog Input Card
10-33
PCI-1714/PCI-1714UL
30/10 MS/s Simultaneous 4-ch Analog Input Cards
10-34
PCI-1747U
250 kS/s, 16-bit, 64-ch Analog Input Card
10-35
PCL-813B
32-ch S.E. Isolated A/D Card
10-36
PCI-1720U
4-ch Isolated Analog Output Card
10-37
PCI-1721
12-bit, 4-ch Advanced Analog Output Card
10-38
PCI-1723
12-bit, 8-ch Isolated Analog Output Card
10-39
PCI-1724U
14-bit, 32-ch Analog Output Card
10-40
PCI-1727U
14-bit, 12-ch Analog Output Card
10-41
PCL-726/PCL-728
6/2-ch Analog Output Cards
10-42
PCI-1735U
64-ch TTL Digital I/O Card
10-43
PCI-1737U
24-ch TTL Digital I/O Card
10-44
PCI-1739U
48-ch TTL Digital I/O Card
10-45
PCI-1751
48-bit Digital I/O and Counter Card
10-46
PCI-1753/PCI-1753E
96/192-ch Digital I/O Cards
10-47
PCI-1755
80 MB/s Ultra High-speed 32-ch Digital I/O Card
10-48
PCI-1757UP
24-ch Digital Input/Output Low Profile Universal PCI Card
10-49
PCL-720+
64-ch TTL Digital I/O Card
10-50
PCL-722
144-ch Digital I/O Card
10-51
PCL-724
24-ch TTL Digital I/O Card
10-52
PCL-731
48-ch TTL Digital I/O Card
10-53
PCI-1730/PCI-1733/PCI-1734
32-ch Isolated Digital I/O Cards
10-54
PCI-1736UP
32-ch Isolated Digital Input/Output Card
10-55
PCI-1750
32-ch Isolated Digital I/O and Counter Card
10-56
PCI-1752/PCI-1754/PCI-1756
64-ch Isolated Digital I/O Cards
10-57
PCI-1758
128-ch Isolated Digital I/O Card
10-58
PCI-1760U
8-ch Relay Actuator and Isolated DI Card
10-59
PCI-1761
8-ch Relay Actuator/ Isolated DI PCI Card
10-60
PCI-1762
16-ch Isolated DI/ Relay Output Card
10-61
PCI-1763UP
Low-profile 8-ch Relay/Isolated DI Card
10-62
PCL-725
8-ch Relay Actuator/Isolated DI ISA Card
10-63
PCL-735
12-ch Relay Actuator Card
10-64
PCI-1780U
8-ch Counter/Timer Card
10-65
PCL-836
6-ch Counter/Timer Card
10-66
PCM-3712/PCM-3718/PCM-3724 PC/104 Cards
10-67
PCM-3725/PCM-3730/PCM-3780 PC/104 Cards
10-68
PCI-1670
GPIB Interface PCI Card
10-69
PCI-1671UP
High-Performance IEEE-488.2 Interface for PCI
10-70
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Data Acquisition and Control
Tutorial & Software
PC-based Data Acquisition System
Overview
In the last few years, industrial PC I/O interface products have become increasingly reliable,
accurate and affordable. Because of this, PC-based data acquisition and control systems
are now widely used in industrial and laboratory applications such as: monitoring, control,
data acquisition and automated testing.
Selecting and building a DA&C (Data Acquisition and Control) system that actually does
what you want it to do requires some knowledge of electrical and computer engineering.
This tutorial gives a brief introduction to what DA&C systems do and how to configure
them. It covers:
 Transducers and Actuators
Signal Conditioning
Signal conditioning circuits improve the quality of signals generated by transducers before
they are converted into digital signals by the PC's data-acquisition hardware. Examples
of signal conditioning are signal scaling, amplification, linearization, cold-junction
compensation, filtering, attenuation, excitation, common-mode rejection, and so on.
One of the most common signal conditioning functions is amplification. For maximum
resolution, the voltage range of the input signals should be approximately equal to the
maximum input range of the A/D converter. Amplification expands the range of the
transducer signals so that they match the input range of the A/D converter. For example,
a x10 amplifier maps transducer signals that range from 0 to 1 V into the range 0 to 10
V before they go into the A/D converter.
 Signal Conditioning
 Data Acquisition and Control Hardware
 Getting Started
 Computer System Software
Transducers and Actuators
A transducer converts temperature, pressure, level, length, position, etc. into voltage,
current, frequency, pulses or other signals.
Thermocouples, thermistors and resistance temperature detectors (RTDs) are common
transducers for temperature measurements. Other types of transducers include flow
sensors, pressure sensors, strain gauges, load cells and LVDTs, which measure flow
rate, pressure variances, force or displacement.
An actuator is a device that activates process control equipment by using pneumatic,
hydraulic or electrical power. For example, a valve actuator can open and close a valve
to control fluid rates.
Using digital I/O and SSRs to open and close a valve
The layout of a typical PC-based data acquisition system
10-
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
DA&C Tutorial & Software
Data Acquisition & Control Hardware
Getting Started
Data acquisition and control hardware generally performs one or more of the following
functions: analog input, analog output, digital input, digital output and counter/timer
functions. This section will discuss each function and list some considerations that are
important when you select a data acquisition and control system.
Advantech: The source for what you need
Analog Inputs (A/D)
Analog to digital (A/D) conversion changes analog voltage or current levels into digital
information. The conversion is necessary to enable a computer to process or store the
signals.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
Advantech manufactures data acquisition hardware and software for measurement,
monitoring and applications control. The following guide is provided to help you choose BAS
components for your data acquisition system.
Step 1: Know your fundamental goal
UNO
Decide whether your DA&C system will be used primarily for measurement, monitoring,
control, or analysis. Know the data requirements of your process, and know the number
of data collection points in your system. Know the required data collection speed, the
RS-485 I/O
sampling rate, the type of measurement, the voltage or current being produced, the desired
accuracy and the output resolution at each data collection point. Finally, know the timing
of events in your system, and any special environmental conditions that exist.
Step 2: Hardware selection
Ethernet I/O
Select the hardware required to achieve your fundamental goal. Advantech provides
plug-in boards for Analog-to-Digital, Digital-to-Analog,Digital I/O, RS-232 or RS-485 TPC
needs. Both ISA and PCI bus products are available. Your hardware selection should be
based on five major criteria:
1. Number and types of channels
The most significant criteria when selecting A/D hardware are:
2. Differential or single-ended inputs
1. Number of input channels
3. Resolution
2. Single-ended or differential input signals
4. Speed
3. Sampling rate (in samples per second)
5. Software compatibility with hardware
4. Resolution (usually measured in bits of resolution)
Step 3: Accessory selection
5. Input range (specified in full-scale volts)
6. Noise and nonlinearity
Most applications require additional accessories which are available as separate items.
These include:
Analog Outputs (D/A)
1. Expansion peripherals to add channels to your system
The opposite of analog to digital conversion is digital to analog (D/A) conversion. This
operation converts digital information into analog voltage or current. D/A devices allow
a computer to control real-world events.
2. Cables, signal conditioners and external boxes such as screw terminals or BNC
accessories
Step 4: Software selection
More than any other single factor, software will determine your system start-up time, as
well as its effectiveness, suitability for your application, and ease of modification.
Three major criteria should determine the choice of software:
1. Operating system used
2. User programming expertise
3. Software compatibility with hardware
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Analog output signals may directly control process equipment. The process can give
feedback in the form of analog input signals. This is referred to as a closed loop control
system with PID control. Analog outputs can also be used to generate waveforms. In this
case, the device behaves as a function generator.
Ethernet Switch
Digital Inputs and Outputs
EDG
Digital input/output functions are useful in applications such as contact closure and switch
status monitoring, industrial On/Off control and digital communications.
ICOM
Counter/Timer
A counter/timer can be used for event counting, flowmeter monitoring, frequency counting,
pulse width measurement, time period measurement, and so on.
Online Download www.advantech.com/products
10-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ActiveDAQ Pro Introduction
What is ActiveDAQ Pro ?
ActiveDAQ Pro is a collection of ActiveX controls for performing I/O operations within any
compatible ActiveX control container, such as Visual Basic, Delphi, etc. You can easily
perform the I/O operations through properties, events and methods. With ActiveDAQ Pro,
you can perform versatile I/O operations to control your Advantech devices.
 Intensity control: It offers two-dimensional display and simple interpolation
for scattered 3D data points so that the user can conveniently check the intensity
variation trend of scattered 3D data points.
The ActiveDAQ Pro package contains the following components:
 Advantech ActiveDAQ Pro Device Control: Enumerate all ADVANTECH devices,
direct I/O operation.
 Advantech ActiveDAQ Pro AI Control: Retrieve data from ADVANTECH AI device.
 Advantech ActiveDAQ Pro AO Control: Export data to ADVANTECH AO device.
 Advantech ActiveDAQ Pro DIO Control: Digital input/output operation.
 Advantech ActiveDAQ Pro Thermo Control: Retrieve temperature by thermocouple
measurement.
 Advantech ActiveDAQ Pro Counter Control: Counter input signal.
 Advantech ActiveDAQ Pro Pulse Control: Pulse signal output.
You can use these ActiveX controls in any development tool that supports them, including
Microsoft Visual C++, Microsoft Visual Basic, Borland C++ Builder, Borland Delphi and
Microsoft Visual Studio .NET.
What's New in ActiveDAQ Pro ?
In the latest version of the ActiveDAQ series: ActiveDAQ Pro, efforts have been made
to improve on the technical aspects and to provide a clear-cut mode of operation, as
explained in the following summary:
Graphic User Interface Control Components
Advantech ActiveDAQ Pro GUI control collection consists of abundant of graphic user
interface (GUI) control components, which enable users to conveniently and quickly build
graph display modules for data acquisition so as to supervise the changing status of the
object. ActiveDAQ Pro GUI control collection also helps users easily develop prototype
vision applications in an interactive environment without programming. These control
components include:
 Knob control: It is a circular data controlling control that provides various graph
styles and can be used to display one or more values on the same interface.
 LED control: This control provides data display and editing functions with the
seven-segment nixie tube mode. After the Formatstring has been chosen or defined
by the user, the displayed value of the control will be adjusted automatically
according to the FormatString and displayed in the text edit box.
 NumEditor control: This control provides the user with the functions of data
displaying and editing. After the Formatstring has been chosen or defined by
the user, the values of the control will be adjusted automatically according to the
FormatString and displayed in the text edit box.
 Slider control: It is a linear data controlling control that provides various graph
styles. A Slider control can be used to set or display one or more values.
 Button control: It offers various display styles(2D and 3D) and is a Boolean
control that displays an on or off state (True or False).
 Graph control: This control provides abundant graph display functions, which
enable the user to displays data of various sources simultaneously.
10-
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Supports all Advantech DAQ devices with high speed functions
Uses optional lists instead of direct input
ActiveDAQ Pro now fully supports all Advantech DAQ cards and functions with complete
high speed data acquisition, including AI (analog input), AO (analog output), DI/O (digital
input/output) and counter cards. These high speed functions are preformed by interrupt
and DMA data transfer which were previously excluded.
Now lists are provided with values which remain limited over various processes. This PAC & Software
option is much more convenient to input and will eliminate a large portion of the direct
data input.
Easy-to-use property sheet interface for configuring controls
The property page will offer selections which will give easy access to all settings
eliminate unnecessary programming. Programming will only be required in specialized
situations.
Independent operation of controls
ActiveDAQ Pro offers total independent control operation, needing no support from other
existing controls.
Default settings for immediate execution
Proper default settings have now been added to all methods and properties. That means
quicker execution for the user, which will offer a prompt response.
Properties and parameters are chosen automatically
BAS
UNO
When the user opts for some specific methods in ActiveDAQ Pro it can result automatically
in appropriate properties and parameters. For example, ActiveDAQ Pro control can RS-485 I/O
automatically determine an appropriate data transferring method to perform the data
acquisition. (Software, interrupt and DMA transfer)
Parameter check-up and correction
Ethernet I/O
Each input parameter has to be within a certain range. As a result it has to have check-up
to ensure legitimacy. In most cases the user will be notified and in others there will be
TPC
an automatic correction.
Better defined error messages and diagnostic guide
ActiveDAQ Pro offers clear error messages description and diagnostic guides for all IPPC
return errors.
Supports all widely known development platforms
ActiveDAQ Pro support Microsoft Windows 2000 and Windows XP operation system.
FPM
As with the previous version, ActiveDAQ 1.6x, it continues to support all widely known
development platforms based on ActiveX technolygy. These platforms include Microsoft AWS
Visual Basic, Visual C++, Visual Basic.Net, Visual C#, Borland C++ Builder and Delphi.
System Requirements
Uses known physical properties
Physical properties like voltage, current and frequency can now be directly applied by the
user and will automatically be reassigned to the data needed by GainCode and sampling
rate. Making these changes has ensured that ActiveDAQ Pro has become much more
user friendly.






IBM compatible PC using at least a 266 MHz or higher microprocessor
Microsoft Windows 2K / XP
VGA compatible graphics card, supporting at least 256 colors.
Minimum 64 MB of RAM.
74MB of free local hard disk space.
One CD-ROM driver
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Straightforward user interface
The new version has become less-hardware dependent and it has relied more on intuition
during the user interface. During the redesigned process, the target was to decrease the
development difficulties. It has become easier for both entry level and advanced level
users to manage.
Online Download www.advantech.com/products
10-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Glossary
Accuracy
Accuracy is the deviation of a measurement from a known standard. Accuracy is normally
specified in percent.
ADC - Analog-to-Digital Converter
ADC is used to convert DC voltage from transducers into digital words (data). The voltage
represents a temperature. pressure, flow, pH, or speed and must converted to a digital
word before it can be passed to an intelligent device like a computer.
Amplifier
Amplifiers are used to boost the analog level (voltage) of the signal.
AO - Analog Output
The D/A converter performs the opposite function of an A/D converter. It interprets
commands from the computer and outputs the proper DC voltage or current. The output
stays at this output level until the computer tells the D/A converter to output a new
value.
TIP : To reduce common mode noise, use a guarded voltmeter. Tie the guard to the low
side of the device being measured. This will shunt any ground loop currents away from
the high and low measurement wires.
DI - Digital Input
A digital input card is used to determine whether an external device is on or off by sensing
the presence or absence of a voltage. The DI can only report ON/OFF status and not the
value of the voltage on each channel (sometimes called a bit). The bit is considered to
be ON if the voltage exceeds a certain value.
Digital cards are usually 8, 16, or 32 channels. They can monitor a number of devices.
For example, a digital card can be attached to a single operator panel to sense the position
of switches on that panel.
Digital filter
The built-in auto-calibration circuitry corrects gain and offset errors in analog input and
analog output channels thereby eliminating the need for external equipment and user
adjustments.
The digital filter function is used to eliminate glitches on input data and reduce the
number of changes to examine and process. The filter blocks pulses that are shorter than
the specified timing interval and passes pulses that are twice as long as the specified
interval. Intermediate-length pulses that are longer than half of the interval, but less than
the interval, may or may not pass the filter depending on your settings.
Automatic channel/gain/SD*/BU* scanning
DMA - Direct Memory Access
Advantech’s DA&C card’s with this function feature an automatic channel/gain/SD/BU
scanning circuit. This circuit controls multiplexer switching during sampling in a way
that is more efficient than software implementation. Onboard SRAM stores different gain,
SD and BU values for each channel. This combination lets users perform multi-channel
high-speed sampling with different gain, SD and BU values for each channel.
A method of transferring data from or to memory at a high rate without involving the
CPU.
Auto calibration
*Note: SD: Single-Ended/Differential; BU: Bipolar/Unipolar
BoardID switch
BoardID DIP switch helps defines each card’s unique identity when multiple identical PCI
cards have been installed in the same computer. The BoardID switch is very useful when
you build your system with multiple identical PCI cards. With the correct BoardID switch
settings, you can easily identify and access each card during hardware configuration and
software programming.
C/T - Counter/Timer
The counter card can be used to sense the presence or absence of a voltage, much like
digital input card. The counter is used to count the number of electronic pulses (totalize),
the duration of the pulse (pulse width), or the rate of pulses (frequency) coming out of
an external device.
Channel-freeze
The channel-freeze function can be enabled either in dry contact or wet contact mode
(selected by the onboard jumper). When the channel-freeze function is enabled, the last
status of each digital output channel will be safely kept for emergency use. Moreover,
you can enable this function through software as it is useful in software simulation and
testing program.
DMA is the hardware/software technique that allows the highest speed transfer of data,
to or form random memory (RAM) . Given the potentially more expensive hardware.
DMA can provide the means to read or write data at precise times without restricting
the microprocessor‘ tasks. For example, one system under DMA control can read or
write any combination of analog, digital or counter/timer data to or from RAM at rates
up to 360KB/second. This is accomplished without taking time from the other tasks of
the microprocessor. The amount of time required to respond to a DMA request is very
small compared to the time required to service an interrupt. This makes the goal of
foreground/background operation, at high speed, possible.
DO - Digital Output
The digital output card interprets a command from the computer and outputs a high or
low voltage on each of its channels (bits). It is commonly used to turn on/off small lights
or to send digital words to machinery.
FSR - Full Scale Range
Gain - Magnitude ratio
For a linear system or element, the ratio of the magnitude (amplitude) of a steady-state
sinusoidal output relative to the causal input; the length of a phasor form the origin to a
point of the transfer locus in a complex plane.
GPIB - General Purpose Interface/Instrument Bus
A standard for IEEE-488 communication interface.
C/T - Counter/Timer
Interrupts data transfer
The counter card can be used to sense the presence or absence of a voltage, much like
digital input card. The counter is used to count the number of electronic pulses (totalize),
the duration of the pulse (pulse width), or the rate of pulses (frequency) coming out of
an external device.
Interrupts to provide a means of tightly controlling the timing of events, while allowing the
processing of more than one task. Multitasking systems are also known as “foreground/
background” systems. One way of putting data acquisition in the background, is to relegate
it to an interrupt routine. The clock or external timing signal, rather than being polled
continuously, is used to generate an interrupt to the computer. Whenever the interrupt
occurs, the computer suspends current activity, and executes an “interrupt service routine”.
The interrupt service routine in this case might be a short program which acquires one
frame of data, and stores it in memory. The computer can perform other operations in
the foreground while collecting data in the background. Whenever a clock tick or external
interrupt occurs, the computer will automatically stop the foreground processing, acquire
Common Mode Noise
Electrical interference on both signal leads of an analog measurement which change
simultaneously relative to ground. Common mode noise most often results when the
ground potential between the measuring instrument and the device being measured are
different. The difference in grounds results in a ground loop, a current flowing through
10-
ground and the low lead. Once this current appears in the low lead wire it will cause a
voltage because the wire has some resistance. The longer the lead, the more lead resistance
and greater the voltage error.
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
the data, and then resume where it left off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
The reaction speed of the interrupt system is much higher than that of a polling loop.
Speed, for a PC, is about 10K ~ 30K Hz in the interrupt mode.
In addition, the PC is continuously busy when the polling loop is operational, and hence
no other tasks can be serviced. When an application cannot tolerate these characteristics, PAC & Software
interrupt techniques may be needed.
Isolation protection
Programmable Power-Up States
Isolation circuits are used to protect sensitive measurement circuitry from interference
currents or voltages. These circuits are useful when the external voltage (from a transducer)
is different than expected by the measurement hardware.
With this function, all output lines are user-configurable for logic high or logic low when
the system is powering up. User-configurable power-up states are useful for ensuring that
the data acquisition card powers up in a known state. Power-up states are programmed
UNO
in the EEPROM through the driver. The default settings are all set to 0.
Keeping the output values after system reset
When the system is hot reset (power is not shut off), the Advantech’s DA&C cards with
this function can either retain the last digital (or analog) output values, or return to its
default configuration, depending on jumper setting. This practical function eliminates
danger caused by misoperation during unexpected system reset.
PWM - Pulse width modulation
BAS
LSB - Least Significant Bit
Pulse width modulation (PWM) technology is widely used for industrial applications such RS-485 I/O
as measurement, motor control, power control and so on. It offers a simple way for digital
control logic to create an analog equivalence. By using Advantech’s high-resolution counter
cards, the duty cycle of a square wave could be modulated to encode some specific analog
Ethernet I/O
signal levels so they can be used to control many electronic devices.
Onboard FIFO memory
Resolution
FIFO is the abbreviation of “First-In, First-Out”. It functions as a “buffer” memory, which
plays an important role in the data acquisition device. You can either enable or disable
the interrupt request of the FIFO buffer. While the interrupt request for FIFO is enabled,
you can further specify whether the interrupt request will be sent whenever one sampling
takes place or when the FIFO buffer is half saturated. Advantech’s data acquisition cards
with onboard FIFO memory enables a continuous high-speed data transfer with more
predictable performance on Windows systems.
Resolution is the smallest change that a measurement instrument can sense. Resolution TPC
is normally specified in bits.
Onboard programmable counter
Advantech’s multifunction cards provide a programmable counter to generate a pacer
trigger for the A/D conversion. The counter chip is an 82C54 or equivalent, which includes
three 16-bit counters on a 10 MHz clock. One counter is used as an event counter for
counting events coming from the input channels. The other two are cascaded together to
make a 32-bit timer for a pacer trigger.
S.E. Input - Single Ended Input
Shielding
An extra layer of conductive material surrounding a wire to prevent external electrical AWS
signals from interfering with the signal on the wire.
SPDT relay - Single-Pole Dual-Throw relay
Optical isolators
SPST relay - Single-Pole Single-Throw relay
Optical isolators are used with digital circuitry to shield high voltage signals from affecting
digital circuitry
TTL - Transistor Transistor Logic
Watchdog Timer
PCI-Bus mastering data transfer
Advantech’s high-speed DA&C cards support PCI-Bus mastering DMA for high-speed
data transfer and gap-free analog input and analog output. By setting aside a block of
memory in the PC, the DA&C cards performs bus-mastering data transfers without CPU
intervention, setting the CPU free to perform other more urgent tasks such as data analysis
and graphic manipulation. The function allows users to run all I/O functions simultaneously
at full speed without losing data.
Plug & Play function
PCI-1711 and PCI-1711L fully comply complies with the PCI Specification Rev 2.2 and
thus are Plug & Play devices. During card installation, it is virtually unnecessary to set any
jumpers or DIP switches. Instead, all bus-related configurations such as base I/O address
and interrupts are conveniently taken care of by the Plug & Play function.
IPPC
A single-ended configuration is best when you need to make analog measurements with
respect to a common external ground. This configuration is also appropriate when there
is no practical way to bring both a signal ground and an analog ground (AGND) back to
FPM
the system‘s input terminals.
Plug-in I/O
CompactPCI
The watchdog timer is a software-configurable feature used to set critical outputs to safe
Signal Conditioning
states in the event of a software failure. It will activate if there is a loss of communication
between the application and the data acquisition card. If the card does not receive a
watchdog clear software command within the interval time specified for the watchdog
timer, the outputs go to a user-defined safe state and remain in that state until the watchdog USB I/O
timer is disabled and new values are written by the software.
After the watchdog timer expires, the card ignores any writes until the watchdog timer
is disabled. Users can set the watchdog timer timeout period through WDT register to Motion Control I/O
specify the amount of time that must elapse before the watchdog timer expires. The
counter on the watchdog timer is configurable up to (232-1) x 100 ns (approximately
seven minutes) before it expires.
Polling
Polling is the simplest method for detecting a unique condition and then taking action. This
involves a software loop that contains all of the required measurement, analysis, decisionmaking algorithms and planned actions. The data acquisition program periodically tests
the system‘s clock or external trigger input to sense a transition. Whenever a transition
occurs, the program then samples each of the inputs and stores their values in a “frame”.
A frame is simply a list that contains the values representing the specified inputs at a
given time. The frames can be stored in RAM, disk or other types of memory. Each time
the program senses a clock “tick”, the inputs are scanned and converted, and a new
frame is added to memory. In this mode, generic PC/AT’s can support an acquisition
rate of about 10Khz.
Online Download www.advantech.com/products
Ethernet Switch
EDG
ICOM
10-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Analog I/O &
Multifunction Cards
Category
Bus
Multifunction
PCI
Model
PCI-1710/1710L
Resolution
Analog Input
General
Spec.
Data
Transfer
Mode
Timer/Counter
12 bits
16 bits
PCI-1741U
16 bits
16 SE/8 Diff.
16 SE/8 Diff.
16 SE
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
4096 samples
100 kS/s
4096 samples
100 kS/s
1024 samples
100 kS/s
1024 samples
1 MS/s
1024 samples
250 kS/s
1024 samples
100 kS/s
1024 samples
200 kS/s







Unipolar Inputs (V)
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1,
0 ~ 0.01
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
Bipolar Inputs (V)
±10, 5, 2.5, 1.25,
0.625
±10, 5, 1, 0.5, 0.1,
0.05, 0.01, 0.005
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625






-


















Configurable
Per-Channel
Pacer/Software/
External Pulse
Analog Slope
Pretrigger
Post-trigger
About-trigger
Software
DMA
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
(PCI-1718HDU)
0 ~ 10, 0 ~ 1,
0 ~ 0.1, 0 ~ 0.01
(PCI-1718HGU)
±10, 5, 2.5, 1.25,
0.625
(PCI-1718HDU)
±10, 5, 1, 0.5, 0.1,
0.05, 0.01, 0.005
(PCI-1718HGU)
0 ~ 10,
0 ~ 5,
0 ~ 2.5,
0 ~ 1.25**
±10, 5, 2.5, 1.25,
0.625**
-
-
-
Bus-mastering
Bus-mastering
-
-
12 bits
2
(PCI-1710 only)
-
12 bits
2
(PCI-1710HG only)
-
12 bits
2
(PCI-1711 only)
-
16 bits
1
1
-
-
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
±5, ±10
Throughput
DMA transfer
Input Channels
Output Channels
Channels
Resolution
Time Base
Static update
16
16
1
16-bit
10 MHz

175 x 100
68-pin SCSI-II





Static update
16
16
1
16-bit
10 MHz

175 x 100
68-pin SCSI-II





Static update
16
16
1
16-bit
10 MHz
175 x 100
68-pin SCSI-II





3
16-bit
10 MHz

175 x 100
68-pin SCSI-II





16 bits
2
(PCI-1716 only)
0 ~ 5, 0 ~ 10, ±5,
±10
Static update
16
16
1
16-bit
10 MHz


175 x 100
68-pin SCSI-II





12 bits
Output range (V)
12 bits
2
(PCI-1712 only)
32 K samples
0 ~ 5, 0 ~ 10, ±5,
±10
1 MS/s

Static update
16
16
1
16-bit
10 MHz

175 x 100
DB-37





Static update
16
16
1
16-bit
10 MHz


175 x 100
68-pin SCSI-II









-
-
-

10-12

10-12

10-14
10-16

10-18
10-20
10-22
Number of
Channels
Digital I/O
12 bits
PCI-1718HDU/
HGU
12 bits
Onboard FIFO
Smapling Rate
Auto Channel
Scanning
Resolution
Analog Output
PCI-1711/1711L PCI-1712/17112L PCI-1716/1716L
Channels
Input
Ranges
Trigger
Mode
12 bits
PCI-1710HG/
1710HGL
12 bits
Onboard FIFO
Isolation Voltage
Auto Calibration
BoardID Switch
Dimensions (mm)
Connector
Windows 98/2000/XP DLL Driver
Windows 98/2000/XP Test Utility
VC++, VB & delphi Examples
Advantech ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers (Ver. 6i and 7.0)
Mathworks
MATLAB Data Acquisiton Tool Box 2.5.1
KW Win32 Driver
Page
* Note: SS = Single DMA channel, Single A/D channel scan
16 (mixed)
SM = Single DMA channel, Multiple A/D channel scan
** Note: All channels should be set to the same range.
10-
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection Guide
Multifunction
PCI
ISA
AI
PCI
PC/104
PCM-3718H PCM-3718HG PCM-3718HO
PCI-1713
PCI-1714
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
PCI-1742U
PCL-711B
PCL-812PG
PCL-818L
PCL-818HD
PCL-818HG
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
12 bits
12 bits
12 bits
PCI-1714UL
16 SE/8 Diff.
8 SE
16 SE
16 SE/8 Diff
16 SE/8 Diff
16 SE/8 Diff
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
1024 samples
1 MS/s
25 kS/s
30 kS/s
40 kS/s
1024 samples
100 kS/s
1024 samples
100 kS/s
100 kS/s
100 kS/s
1024 samples
100 kS/s*

-
-









0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 0.125
-
-
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1,
0 ~ 0.01
0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 0.125
0 ~ 10, 0 ~ 1
0 ~ 0.1,
0 ~ 0.01
0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 0.125
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
-
-
±10, 5, 2.5,
1.25
0.625
±10, 5, 2.5,
1.25, 0.625
±5, 2.5, 1, 0.5
12 bits
12 bits
12 bits
32 SE/16 Diff.
4 SE
4 SE
(Isolation)
4096 samples 32,768 samples 8,192 samples
100 kS/s
30 MS/s
10 MS/s
BAS
UNO
RS-485 I/O
Ethernet I/O
±10, 5, 2.5,
1.25
0.625
±10, 5, 2.5,
±5, 2.5, 1.25,
1.25, 0.625,
0.625, 0.3125
0.3125
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5,
1.25, 0.625
±10, 5, 1, 0.5,
0.1, 0.05, 0.01,
0.005
±10, 5, 2.5,
1.25
0.625
±10, 5, 1, 0.5,
0.1,
0.05, 0.01,
0.005
±5, 2.5, 1, 0.5
TPC












































Bus-mastering
-
SS*
SM*
SM*
SM*
SS*
SS*
SS*
-
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
-
-
12 bits
-
-
-
2
1
2
1
1
1
-
-
1
-
-
-
-
0 ~ 5, 0 ~ 10,
±10
Static update
16
16
1
16-bit
10 MHz
185 x 100
DB-37





-
-
-
-
-
-
-
-
0 ~ 5, 0 ~ 10
-
-
-
Static update
16
16
1
16-bit
10 MHz
155 x 100
DB-37





0 ~ 5, 0 ~ 10,
±10
Static update
16
16
1
16-bit
10 MHz
185 x 100
DB-37





-
-
Static update
-
16
16
16
1
16 bits
10 MHz
96 x 90
2 x 20-pin





1
16 bits
10 MHz
96 x 90
2 x 20-pin





1
16 bits
10 MHz
96 x 90
2 x 20-pin





2,500 VDC
175 x 100
DB-37





1
8-bit
60 MHz


175 x 100
4 BNC





1
60 MHz


175 x 100
4 BNC





0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10 0 ~ 5, 0 ~ 10
±5, ±10
Static Update Static update Static update
16
16
16
16
16
16
1
1
16 bits
16-bit
10 MHz
2 MHz
2 MHz

175 x 100
175 x 100
185 x 100
68-pin SCSI-II 2 x 20-pin
2 x 20-pin















0 ~ 5, 0 ~ 10
Bus-mastering Bus-mastering






-
-
-

-
-
10-24
10-26
10-27
10-28
10-20
10-20
10-63
10-63
10-63
10-30
10-31
10-31
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
* 80kHz on P4-based (or upper) system
** Note: System-dependent
Online Download www.advantech.com/products
10-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Analog I/O &
Multifunction Cards
Category
Bus
AI
PCI
Model
Resolution
Channels
General
Spec.
Onboard FIFO
Smapling Rate
Auto Channel
Scanning
Analog Input
Unipolar Inputs
(V)
Input
Ranges
Trigger
Mode
Data
Transfer
Mode
Bipolar Inputs
(V)
Configurable
Per-Channel
Pacer/Software/
External Pulse
Analog Slope
Pretrigger
Post-trigger
About-trigger
Software
DMA
Resolution
PCI1715U
12bits
32 SE/16
Diff.
1024
samples
500 kS/s


-
PCI
PCIPCL-813B PCI-1720U PCI-1721
1747U
16 bits
12 bits
64 SE/32
32 SE
Diff.
1024
samples
250 kS/s
25 kS/s

0 ~10,
0 ~ 10,
0~5
0 ~ 5,
0 ~ 2.5,
0 ~ 2.5,
0 ~ 0.125 0 ~ 1.25
±10, 5, 2.5, ±10, 5,
1.25,
2.5, 1.25,
0.625
0.625

AO
ISA
-
-
PCL-727
PCL-728
PCM-3712
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
12 bits
0 ~ 10,
0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
±10, 5,
2.5, 1.25,
0.625


-
PCL-726
-
Software
only
Software
only
Busmastering
-
-
-


-
PCI-1723 PCI-1724
-
12 bits
16 bits
14 bits
14 bits
12 bits
4
Number of
4
(Waveform
8
32
12
6
Channels
(Isolation)
Output)
Onboard FIFO
1K samples
0 ~ 5,
0 ~ 5,
0 ~ 5,
0 ~ 5,
0 ~ 10,
0 ~ 10,
-10 ~ 10
Analog Output
Output range
±10,
0 ~ 10
0 ~ 10,
±5, ±10,
±5, ±10,
0 ~ 20 mA,
(V)
0 ~ 20 mA
±5,
±5, ±10,
0 ~ 20 mA, 0 ~ 20 mA, 4 ~ 20 mA
4 ~ 20 mA 4 ~ 20 mA
4 ~ 20 mA 4 ~ 20 mA
Static
Static
Static
Static
Static
Throughput
10M
update
update
update
update
update
BusDMA transfer
mastering
Input Channels
16
16
Digital I/O
16
16
Output Channels
16
16
Channels
1
1
Timer/Counter
Resolution
16-bit
16-bit
Time Base
10 MHz
10 MHz
Isolation Voltage
2,500 VDC
500 VDC
2,500 VDC



Auto Calibration







BoardID Switch
Dimensions (mm)
175 x 100 175 x 100 219 x 100 175 x 100 175 x 100 175 x 100 175 x 100 175 x 100 337 x 112
68-pin
68-pin
68-pin
2 x 20-pin,
Connector
DB-37
DB-37
DB-37
DB-62
4 x 20-pin
SCSI-II
SCSI-II
SCSI-II
DB-37









Windows 98/2000/XP DLL Driver









Windows 98/2000/XP Test Utility









VC++, VB & delphi Examples









Advantech ActiveDAQ/ActiveDAQ Pro









Labview I/O Drivers (Ver. 6i and 7.1)
Mathworks MATLAB Data



Acquisiton Tool Box 2.5.1
KW Win32 Driver
Page
10-33
10-32
10-34
10-35
10-36
10-37
10-38
10-39
10-40
* Note: SS = Single DMA channel, Single A/D channel scan
10-10
Plug-in I/O Cards
PC./104
-
-
Pacer/
Software
-
Busmastering
-
ISA
PCI1727U
-
-
-
-
12 bits
12 bits
12 bits
12
2 (Isolation)
2
0 ~ 5,
-0 ~ 5,
0 ~ 10,
0 ~ 10, ±5, ±5, ±10,
4 ~ 20 mA 0 ~ 20 mA,
4 ~ 20 mA
Static
Static
update
update
-
-
-
-
16
16
500 VDC
337 x 112 185 x 120
2 x 20-pin,
2 x DB-9
DB-37










0 ~ 5,
0 ~ 10,
±5, ±10,
4 ~ 20 mA
Static
update
96 x 90
1 x 10-pin
box header







-
10-39
10-40
10-63
SM = Single DMA channel, Multiple A/D channel scan
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Digital I/O & Counter Cards
Bus
Category
Non-Isolated DI/O
Bus
PCI
TTL DI/O
Model
PCI-1735U
Input Channels
32
Output Channels
32
Output
Channel
Isolated DI/O
Input
Output
24
PCI-1739U
48
PCI-1751U
48
PCI-1753/1753E
96
32
PCI-1757UP
24
PCL-720+
32
32
PCL-722
144
0.5 V @ 24 mA 0.5 V @ 24 mA 0.5V @ 24 mA 24 mA @ 0.4 V 24 mA @ 0.44 V 48 mA @ 0.5 V 0.5 V @ 24 mA 24 mA @ 0.5 V
24 mA @ 0.5 V
Source Current
2.0 V @ 15 mA
3 mA @ 2.4 V
15 mA @ 2.4 V
Channels
-
2.0 V @ 15mA 2.0 V @ 15 mA 15 mA @ 2.4 V 24 mA @ 3.76 V 15 mA @ 2.4 V 2.0 V @15 mA
-
-
-
-
-
-
-
-
Isolation Voltage
-
-
-
-
-
-
-
-
-
Input Range
-
-
-
-
-
-
-
-
-
Channels
-
-
-
-
-
-
-
-
-
Isolation Voltage
-
-
-
-
-
-
-
-
-
Output range
-
-
-
-
-
-
-
-
-
Max. Sink
Current
-
-
-
-
-
-
-
-
-
3
-
-
3
-
3
-
3
-
Resolution
16 bits
-
-
16-bit
-
16-bit
-
16-bit
-
Time Base
10 MHz
-
-
5 MHz
-
10 MHz
-
1 MHz
-
Pattern Match
-
-
-
-


-
-
-
Change of State
-
-
-
-


-
-
-
BoardID Switch







-
-
Channel-Freeze Function
-
-
-
-
-

-
-
-
Output Status Read Back





-

-
-
Dry/Wet Contact
-
-
-


-

-
-
175 x 100
175 x 100
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
Connectors
5 x 20-pin
1 x 50-pin
2 x 50-pin
68-pin SCSI-II
Windows 98/2000/XP DLL Driver





Windows 98/2000/XP Test Utility




VC++, VB & delphi Examples




Advantech ActiveDAQ/
ActiveDAQ Pro



Labview I/O Drivers
(Ver. 6i and 7.0)


Mathworks
MATLAB & Simulink
Data Acquisiton Tool Box 2.5.1
-
-
KW Win32 Driver
Page
PCI-1755
Sink Current
Channels
Timer/Counter
Advanced Function
PCI-1737U
120 x 65
185 x 100
334 x 100
1 x DB-25
5 X 20- pin
6 x 50-pin
















-










-


-
-


100-pin SCSI-II 100-pin SCSI-II
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
ISA
-
-
-
-
-
-
-
-
-
10-44
10-45
10-46
10-41
10-42
10-43
10-47
10-44
10-48
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
* Dry/wet contact can be mixed at the same time within one group.
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Digital I/O & Counter Cards
Category
Non-Isolated DI/O
Bus
ISA
TTL DI/O
Input Channels
Isolated DI/O
Output
Timer/Counter
Advanced Function
24
Output Channels
Input
PCI
48
48
-
16
-
-
-
16
-
-
-
-
0.5 V @
24 mA
24
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Sink Current
24 mA @
0.4 V
24 mA @ 0.5 V @ 24
0.4 V
mA
-
8 mA @
0.5 V
Source Current
15 mA @
2.4 V
15 mA @ 2.0 V @ 15
2.4 V
mA
-
0.4 mA @
2.4 V
-
-
2.0 V @
15 mA
-
-
-
-
-
64 (Sink)
32 (Sink)
128
-
2,500 VDC
2,500 VDC
2500 VRMS
-
10 ~ 50 VDC 10 ~ 50 VDC 5 ~ 25 VDC
-
Channels
-
-
-
8 (Sink)
16 (Sink)
32 (Sink)
-
-
16 (Sink)
Isolation
Voltage
-
-
-
2,500 VDC
2,500 VDC 2,500 VDC
-
-
2,500 VDC
-
Input Range
-
-
-
5~30 VDC
5 ~ 30 VDC 5 ~ 30 VDC
-
-
5 ~ 50 VDC
-
Channels
-
-
-
8 x Form C
16 (Sink)
-
32 (Sink)
-
16 (Sink)
64 (Sink)
-
32 (Sink)
-
128
Isolation
Voltage
-
-
-
2,500 VDC
2,500 VDC
-
2,500 VDC
-
2,500 VDC
2,500 VDC
-
2,500 VDC
-
2500 VRMS
Output Range
-
-
-
-
5 ~ 40 VDC
-
5 ~ 40 VDC 5 ~ 40 VDC
-
5 ~ 40 VDC
-
5 ~ 40 VDC
Max. Sink
Current
-
-
-
30 VDC @ 5 ~ 40 VDC
1A
240 VAC @ 200 mA
0.25 A
-
200 mA
-
Channels
-
-
-
-
-
-
Resolution
-
-
-
-
-
Time Base
-
-
-
-
200 mA
200 mA
-
200 mA
-
90 mA
-
1
-
-
-
-
-
-
-
16-bit
-
-
-
-
-
-
-
-
1 MHz
-
-
-
-
-
Pattern Match
-
-
-
-
-
-
-
-
-
-
-
-
-
Change of State
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BoardID Switch
-
-
-





-





Channel-Freeze Function
-
-
-
-

-
-
-
-

-

-
-
Output Status Read Back
-
-
-
-

-

-
-

-

-

-
-


-
-

-
-
-
Dry/Wet Contact
-
-
96 x 90
132 x 80
Dimensions (mm)
125 x 100 185 x 100
Connectors
1 x 50-pin
2 x 50-pin 2 x 50-pin
2 x 20-pin
175 x 100 175 x 100 175 x 100 120 x 65
-
-
175 x 100
175 x 100
175 x 100 175 x 100
100-pin
SCSI-II
100-pin
SCSI-II
100-pin
SCSI-II
dual
dual
100-pin
100-pin
mini-SCSI mini-SCSI
175 x 100 175 x 100
2 x opto-22
1 x DB-37
compatible
1 x DB-37 1 x DB-37 1 x DB-44 1 X DB-37
4 x 20-pin
box header
Windows 98/2000/XP DLL
Driver














Windows 98/2000/XP Test
Utility














VC++, VB & delphi Examples














Advantech ActiveDAQ/
ActiveDAQ Pro














Labview I/O Drivers
(Ver. 6i and 7.0)














Mathworks MATLAB & Simulink
Data Acquisiton Tool Box 2.5.1


-
-



-




-

KW Win32 Driver
Page
10-12
USB
PCIPCIPCIPCL-724 PCL-731 PCM-3724 USB-4761 PCI-1730 PCI-1733 PCI-1734
PCI-1750 PCI-1752 PCI-1754 PCI-1756
1758UDI 1758UDO
1736UP
Model
Output
Channel
Isolated DI/O
PC/104
-
-
-
-



-
-



-
-
10-45
10-46
10-63
10-71
10-49
10-50
10-51
10-55
10-52
10-53
10-53
10-53
10-54
10-54
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection Guide
Isolated DI/O
Counter
PCI
PCIPCI-1760U
1758UDIO
ISA
PCI-1761
PCI-1762
PCI-1763UP
PCL-725
PC/104
PCL-730 PCL-733 PCL-734
PCI
ISA
PC/104
PCL-735
PCM-3725
PCM-3730
PCI-1780U
PCL-836
PCM-3780
24
BAS
UNO
-
-
-
-
-
-
16
-
-
-
8
16
8
16
-
-
-
-
-
-
16
-
-
-
8
16
8
16
-
-
-
-
-
-
8 mA @
0.5 V
-
-
-
0.5 V @
8 mA
24 mA @
0.5 V
8 mA @ 0.5 V
24 mA @
0.5 V
-0.4 mA @
2.4 V
15 mA @
2.4 V
0.4 mA @
2.4 V
15 mA @
2.0 V
-
-
-
-
-
-
0.4 mA @
2.4 V
-
-
-
64
8 (Sink)
8 (Sink)
8 (Sink)
8
8 (Sink)
16 (Sink)
32 (Sink)
-
-
8
8
-
-
-
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
1,500 VDC
2,500 VDC 2,500 VDC
-
-
2,500 VDC
2,500 VDC
-
-
-
5 ~ 25 VDC
5 ~ 12 VDC
10 ~ 50 VDC
10 ~ 50 VDC
10 ~ 50 VDC
5 ~ 24 VDC 5 ~ 24 VDC 5 ~ 24 VDC
-
-
10 ~ 50 VDC
5 ~ 24 VDC
-
-
-
64
8 x Form C
4 x Form A
4 x Form C
16 x Form C
8 x Form C
4 x Form A
4 x Form C
16 (Sink)
-
32 (Sink)
12 x Form C
8 x Form C
8
-
-
-
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
1,000 VDC
1,000 VDC
-
1,000 VDC
1,000 VDC
2,000 VDC
2,500 VDC
-
-
-
5 ~ 40 VDC
120 VAC @
0.5 A
30 VDC @
1A
250 VAC @
3A
24 VDC @
3A
120 VAC @
0.5 A
30 VDC @
1A
120 VAC @ 5 ~ 40 VDC
0.5 A
250 VAC @ 3 A
24 VDC @3A
30 VDC @
200 mA
1A
-
5 ~ 40 VDC 0.6 A @ 100
240 VAC @
VDC
0.25 A
200 mA 0.6 A @ 125 30 VDC @ 1 A
VDC
-
-
-
-
-
Up CTR
for DI
2 X PWM
-
-
-
-
-
-
-
-
-
-
8 X CTR
6 X CTR
3 X PWM
2
-
16-bit
(2,500
Isolation)
-
-
-
-
-
-
-
-
-
-
16-bit
16-bit
16 bits
-
500 Hz for
Up CTR
-
-
-
-
-
-
-
-
-
-
20 MHz
10 MHz
20 MHz
-

-
-
-
-
-
-
-
-
-
-
-
-
-
-

-
-
-
-
-
-
-
-
-
-
-
-
-





-
-
-
-
-
-
-

-
-
90 mA
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
5 ~ 40 VDC
200 mA
-
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
-
-
-

-
-
-
-
-
-
-
-
-
-
-




-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
175 x 100
175 x 100
175 x 100
175 x 100
120 x 65
147 x 95
185 x 100 185 x 100 185 x 100
155 x 100
96 x 90
96 x 90
175 x 100
185 x 100
96 x 90
dual 100pin
mini-SCSI
1 X DB-37
1 X DB-37
1 x DB-62
1 x DB-44
1 x DB-37
1 x DB-37
1 x DB-37 1 x DB-37
4 x 20-pin
1 x DB-37
1 x 20-pin
1 x 50-pin
3 x 20-pin
68-pin
SCSI-II
1 x DB-37
2 x 20-pin
1 x 50-pin
1 x 20-pin

























































-
-
-















-



-





-
-
-

-
-
-


-
-
-
-
-
-
-
-
-
-
-
10-54
10-58
10-57
10-59
10-56
10-57
10-49
10-50
10-51
10-60
10-64
10-64
10-62
10-61
10-64
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1710
PCI-1710HG
100 kS/s, 12-bit, PCI-bus
Multifunction Card
100 kS/s, 12-bit, PCI-bus,
High Gain, Multifunction Card
Features
 16 single-ended, 8 differential or a combination of analog inputs
 12-bit A/D converter, with up to 100 kHz sampling rate
 Programmable gain
 Automatic channel/gain scanning
 Onboard FIFO memory (4096 samples)
 Two 12-bit analog output channels
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
 BoardID™ switch
Introduction
The PCI-1710 Series are multifunction cards for the PCI bus. Their advanced circuit design provides higher quality and more functions, including the five most desired measurement
and control functions: 12-bit A/D conversion, D/A conversion, digital input, digital output, and counter/timer.
Specifications
Analog Output (PCI-1710/1710HG only)
Analog Input








Channels
Resolution
Max. Sampling Rate*
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
16 single-ended/ 8 differential (SW programmable)
12 bits
100 kS/s
4096 samples
±30Vp-p
1 GΩ
Software, onboard programmable pacer, or external
(V, software programmable)
PCI-1710/1710L
Bipolar
Unipolar
Accuracy (% of FSR ±1LSB)
PCI-1710HG/1710HGL
Bipolar
±10
±5
Unipolar
0 ~ 10
Accuracy
(% of FSR
0.1
0.1
±1LSB)
±10
0.1
±5
0 ~ 10
0.1
±1
-
±0.5
0~1
±0.1
-
0.2
0.2
0.2
±2.5
0~5
0.2
±1.25
0 ~ 2.5
0.2
±0.625
0 ~ 1.25
0.4
±0.05 ±0.01 ±0.005
0 ~ 0.1
0 ~ 0.01
0.2
0.4
0.4
*Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.




Channels
Resolution
Output Rate
Output Range
Internal Reference
2
12 bits
Static update
(V, software programmable)
Unipolar
External Reference




Slew Rate
Driving Capability
Operation Mode
Accuracy
0 ~ +5 V @ -5 V
0 ~ +10 V @ -10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
10 V/ms
3 mA
Software polling
INLE: ±1/2 LSB, DNLE: ±1/2 LSB
Digital Input
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
 Channels
 Resolution
 Compatibility
1
16 bits
5 V/TTL
 Max. Input Frequency 1 MHz
10-14
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1710
PCI-1710HG
Specifications Continued
Pin Assignments
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
SCSI-68P female x 1
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max: 5 V @ 1.0 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




Ordering Information




PCI-1710
PCI-1710L
PCI-1710HG
PCI-1710HGL
 PCLD-8710
 PCLD-8710BNC
 PCL-10168-1
 PCL-10168-2
 ADAM-3968
100 kS/s, 12-bit multifunction card
100 kS/s, 12-bit multifunction card without AO
100 kS/s, 12-bit high-gain multifunction card
100 kS/s, 12-bit high-gain multifunction card without
AO
SCSI-68 wiring terminal w/CJC, DIN-rail mount
SCSI-68 wiring terminal w/CJC and BNC connectors,
DIN-rail mount
SCSI-68 Shielded Cable, 1 m
SCSI-68 Shielded Cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-15
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1711
PCI-1711L
100 kS/s, 12-bit, 16-ch S.E. Input Low-cost
Multifunction Card
100 kS/s, 12-bit, 16-ch S.E. Input Low-cost
Multifunction Card w/o AO function
Features
 16 single-ended analog inputs
 12-bit A/D converter, with up to 100 kHz sampling rate
 Programmable gain
 Automatic channel/gain scanning
 Onboard FIFO memory (1024 samples)
 Two 12-bit analog output channels (PCI-1711 only)
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
Introduction
PCI-1711 and PCI-1711L are powerful, but low-cost multifunction cards for the PCI bus. PCI-1711 comes with 2 analog output channels, while the PCI-1711L doesn’t. Thus,
PCI-1711L represents a cost saver for those that do not need analog output.
Specifications
Digital Inputs
Analog Input








Channels
Resolution
Max. Sampling Rate*
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
16 Single-ended
12 bits
100 kS/s max.
1024 samples
30 Vp-p
2 MΩ/5 pF
Software, onboard programmable pacer, or external
(V, software programmable)
Bipolar
Accuracy (% of FSR ±1LSB)
± 10
0.1
±5
0.1
± 2.5
0.2
± 1.25
0.2
± 0.625
0.4
*Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
Analog Output (only for PCI-1711)




Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
 Slew Rate
 Driving Capability
 Output Impedance
 Operation Mode
 Accuracy
10-16
2
12 bits
Static update
(V, software programmable)
Unipolar
0 ~ +5 V, 0 ~ +10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
11 V/µs
3 mA
0.81 Ω
Software polling
INLE: ±1/2 LSB
DNLE: ±1/2 LSB
Plug-in I/O Cards
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Outputs
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
General
Bus Type
PCI V2.2
SCSI-68P female x 1
I/O Connector
175 x 100 mm (6.9" x 3.9")
Dimensions (L x H)
Power Consumption
PCI-1711:
Typical: +5 V @ 850 mA
Max: +5 V @ 1.0 A
PCI-1711L
Typical: +5 V @ 700 mA
Max: +5 V @ 1.0 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1711
PCI-1711L
Ordering Information




PCI-1711
PCI-1711L
PCLD-8710
PCLD-8710BNC
 PCL-10168-1
 PCL-10168-2  ADAM-3968
Pin Assignments
100 kS/s, 12-bit multifunction card
100 kS/s, 12-bit multifunction card without AO
SCSI-68 wiring terminal w/CJC, DIN-rail mount
SCSI-68 wiring terminal w/CJC and BNC connectors,
DIN-rail mount
SCSI-68 shielded cable, 1 m
SCSI-68 shielded cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-17
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1712
PCI-1712L
1 MS/s, 12-bit High-speed
Multifunction Card
1 MS/s, 12-bit High-speed
Multifunction Card w/o AO function
Features
16 single-ended, 8 differential or a combination of analog inputs
12-bit A/D converter, with up to 1 MHz sampling rate
Programmable gain
Automatic channel/gain/SD*/BU* scanning
Onboard FIFO memory (AI:1024 samples AO:32768 samples)
Two 12-bit analog output channels with continuous waveform output function
16 digital input and output channels
Three 16-bit programmable multifunction counter/timers on 10 MHz
Auto-calibration (AI/AO)
PCI-Bus mastering data transfer
Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
 Onboard programmable multifunction counter/timer
 Continuous analog output (PCI-1712 only)
 Flexible triggering and clocking capabilities











Introduction
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples
for A/D, and up to 32 K samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two
12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
Specifications
 Output Impedance
 Operation Mode
 Accuracy
Analog Input
 Channels
16 single-ended/ 8 differential (SW programmable)
 Resolution
12 bits
 Max. Sampling Rate* Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
 FIFO Size
1024 samples
 Overvoltage Protection 30 Vp-p
 Input Impedance
100 MΩ 10 pF (Off), 100 MΩ 100 pF (On)
 Sampling Modes
Software, onboard Programmable Pacer or External
 Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
0 ~ 10
0~5
0 ~ 2.5
0 ~ 1.25
±10
±5
±2.5
±1.25
±0.625
0.05
0.03
0.03
0.05
0.1
*Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
Analog Output





Channels
Resolution
Output Rate
FIFO Size
Output Range
Internal Reference
2
12 bits
1 MS/s
32768 samples
(V, software programmable)
Bipolar
Unipolar
External Reference
 Slew Rate
 Driving Capability
10-18
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
20 V/µs
±10 mA
Plug-in I/O Cards
0.1 Ωmax.
Software polling, continuous output, waveform output
INLE: ±1 LSB
DNLE: ±1 LSB (monotonic)
Digital Input
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
3
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V 2.2
SCSI-68P female x 1
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max: +5 V @ 1.0 A, +12 V @ 700 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 85° C (-4 ~ 185° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1712
PCI-1712L
Ordering Information
 PCI-1712
 PCI-1712L




PCLD-8712
PCL-10168-1
PCL-10168-2
ADAM-3968
Pin Assignments
1M S/s, 12-bit high-speed multifunction card
1M S/s, 12-bit high-speed multifunction card without
AO
Industrial Wiring Terminal Board for DIN-rail mounting
SCSI-68 Shielded Cable, 1 m
SCSI-68 Shielded Cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-19
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1716
PCI-1716L
250 kS/s, 16-bit High-Resolution
Multifunction Card
250 kS/s, 16-bit High-Resolution
Multifunction Card w/o AO Function
Features
 16 single-ended, 8 differential or a combination of analog inputs
 16-bit A/D converter, with up to 250 kHz sampling rate
 Onboard FIFO memory (1024 samples)
 Auto-calibration
 PCI-Bus mastering data transfer
 2 analog output channels (PCI-1716 only)
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
 BoardID™ switch
Introduction
PCI-1716 and PCI-1716L are powerful high-resolution multifunction cards for the PCI bus. They feature a 250 kS/s 16-bit A/D converter, and an onboard 1K sample FIFO buffer for
A/D. The cards can also have up to sixteen single-ended or eight differential A/D input channels or a combination of these; two 16-bit D/A output channels, 16 digital input/output
channels, and one 10 MHz 16-bit counter channel. PCI-1716 and PCI-1716L provide specific functions for different user requirements.
Specifications
Digital Input
Analog Input









Channels
Resolution
Max. Sampling Rate*
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Trigger Modes
Input Range
16 single-ended/ 8 differential (SW programmable)
16 bits
250 kS/s max.
1024 samples
30 Vp-p
Off: 100 MΩ/10 pF, On: 100 MΩ/100 pF
Software, onboard programmable pacer, or external
Pre-trigger, Post-trigger, Delay-trigger, About-trigger
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
± 10
0.05
0 ~10
±5
0.03
0 ~5
± 2.5
0.03
0 ~2.5
± 1.25
0.05
0 ~1.25
± 0.625
0.1
*Note:
The sampling rate and throughput depends on the computer hardware architecture
and software environment. The rates may vary due to programming language, code
efficiency, CPU utilization and other factors.
Analog Output (PCI-1716 only)




Channels
Resolution
Output Rate
Output Range
2
16 bits
Static update
(V, software programmable)
Unipolar
Bipolar
0 ~ 5 , 0 ~ 10
±5 V, ±10 V
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
External Reference -x ~ +x V @ +x V (-10 ≤ x ≤ 10)
Internal Reference





10-20
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
20 V/µs
±20 mA
0.1 Ω max.
Software polling
INLE: ±1 LSB
Plug-in I/O Cards
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V
Pacer/Counter





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
1 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
General
Bus Type
I/O Connector
Dimensions
Power Consumption
PCI V2.2
SCSI-68P female x 1
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max.: +5 V @ 1 A, +12 V @ 700 mA
 Operating Temperature 0 ~ 60° C (32 ~ 158° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 85° C (-4 ~ 158° F)
 Operating Humidity
5 ~ 85% RH non-condensing(refer to IEC 68-1, -2, -3)
5 ~ 95% RH non-condensing (refer to IEC 68-1, -2, -3)
 Storage Humidity




Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1716
PCI-1716L
Ordering Information
 PCI-1716
 PCI-1716L
 PCLD-8710
 PCLD-8710BNC
 PCL-10168-1
 PCL-10168-2
 ADAM-3968
Pin Assignments
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
250 kS/s, 16-bit high-resolution multifunction card
250 kS/s, 16-bit high-resolution multifunction card
without AO
SCSI-68 wiring terminal w/CJC, DIN-rail mount
SCSI-68 wiring terminal w/CJC and BNC connectors,
DIN-rail mount
SCSI-68 Shielded Cable, 1 m
SCSI-68 Shielded Cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
PCI-1742U
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1718HDU
PCI-1718HGU
100 kS/s,12-bit, PCI Multifunction Card
100 kS/s, 12-bit High-Gain, PCI Multifunction
Card
Features
 16 single-ended or 8 differential analog inputs
 12-bit A/D converter, with up to 100 kHz sampling rate
 Programmable gain
 Automatic channel/gain scanning
 Onboard FIFO memory (1024 samples)
 One 12-bit analog output channel
 16 digital inputs and 16 digital outputs
 Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
 BoardID™ switch
PCI-1718HGU
PCI-1718HDU
Introduction
The PCI-1718 series and the PCL-818H series are 100 kS/s multifunction data acquisition cards that offer the five most desired measurement and control functions: 12-bit A/D
conversion, 12-bit D/A conversion, digital input, digital output, and counter/timer. With 3-way compatibility, migration is possible from ISA bus to PCI bus. The HG cards have the
same specifications as the HD cards, but also offer a special high-gain programmable instrument amplifier for reading very low input signals.
Specifications
Analog Input
Digital Input
 Channels
 Resolution
 Max. Sampling Rate
16 single-ended/8 differential (SW programmable)
12 bits
100 kS/s
 Channels
 Compatibility
 Input Voltage
 FIFO Size
1024 samples
Digital Output
 Overvoltage Protection 30 Vp-p
100 MΩ
 Input Impedance
 Sampling Modes
Software, onboard or external programmable pacer
 Input Range
PCI-1718HDU
PCI-1718HGU
Unipolar
Bipolar
Accuracy
(% of FSR
±1LSB)
Unipolar
Bipolar
Accuracy
(% of FSR
±1LSB)
N/A
±10
0~10
±5
0~5
±2.5
0~2.5
±1.25
0~1.25
±0.625
0.1
0.1
0.2
0.2
0.4
N/A
±10
0~10
±5
N/A
±1
0~1
±0.5
N/A
±0.1
0.1
0.1
0.2
0.2
0.4
0.8
0.8
Analog Output




Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
 Slew Rate
 Driving Capability
 Output Impedance
 Operation Mode
 Accuracy
10-22
1
12 bits
Static Update
(V, software programmable)
Unipolar
PCI-1718H
10 V/µs
±10 mA
0.1 Ω max.
Software polling
INLE: ±1/2 LSB
Plug-in I/O Cards
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Counter/Timer
0~0.1 N/A 0~0.01
±0.05 ±0.01 ±0.005
0.4
 Channels
 Compatibility
 Output Voltage
16
5 V/TTL
Logic 0: 0.8 V max., Logic 1: 2 V min.
0 ~ 5, 0 ~ 10
0 ~ x V @ x V (-10 ≤ x ≤ 10)





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
General
 Bus Type
 I/O Connector
Universal PCI 2.2
DB-37P female x 1
Box header 20P x 2
 Dimensions
175 x 100 mm (6.9" x 3.9")
 Power Consumption
Typical: +5 V @ 850 mA
Max.: +5 V @ 1 A
 Operating Temperature 0 ~ 60 °C (32 ~ 158 °F)
 Storing Temperature -20 ~ 70 °C (-4 ~ 158 °F)
 Operating Humidity
5 ~ 85% RH non-condensing (refer to IEC 68-1,-2,-3)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-1,-2,-3)
 Certifications
CE
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1718HDU
PCI-1718HGU
PCL-818HD/HG
Ordering Information









PCI-1718HDU
PCI-1718HGU
PCL-818HG PCL-10120-1
PCL-10120-2
PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-8115  PCLD-880 Pin Assignments
12-bit multi-function card with PCI bus
12-bit high-gain multi-function card with PCI bus
High-performance and High-gain multifunction card
20-pin flat cable, 1 m
20-pin flat cable, 2 m
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
Industrial Wiring Terminal with CJC circuit and DB37
connector
Industrial Wiring Terminal with DB37 connector
A/D S0
A/D S1
A/D S2
A/D S3
A/D S4
A/D S5
A/D S6
A/D S7
A.GND
A.GND
V.REF
S0*
+12 V
S2*
D.GND
NC
Counter 0 CLK
Counter 0 OUT
+5V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
A/D S8
A/D S9
A/D S10
A/D S11
A/D S12
A/D S13
A/D S14
A/D S15
A.GND
A.GND
DA0.OUT
DA0.VREF
S1*
S3*
D.GND
EXT.TRIG
Counter 0 GATE
PACER
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-23
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1741U
16-bit, 200 kS/s Low-Cost
Multifunction Card w/AO
Features
 16 single-ended, 8 differential or a combination of analog inputs
 16-bit A/D converter, with up to 200 kHz sampling rate
 Onboard FIFO memory (1024 samples)
 Auto calibration
 Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
 Onboard programmable counter
 BoardID™ switch
Introduction
PCI-1741U is a powerful high-resolution multifunction DAS card for the PCI bus. Its sampling rate is up to 200 kS/s and the 16-bit resolution makes it suitable for most data
acquisition applications. PCI-1741U provides 16 single-ended or 8 differential analog input channels, one 16-bit D/A output channel, 16 digital input/output channels, and one 10
MHz 16-bit counter channel.
Specifications
Digital Input
Analog Input








Channels
Resolution
Max. Sampling Rate FIFO Size
Overvoltage Protection
Input Impedance
Sampling Mode
Input Range*
16 single-ended/8 differential (SW programmable)
16 bits
200 kS/s
1024 samples
30 Vp-p
100 MΩ/10pF (Off); 100 MΩ/100pF (On)
Software, onboard programmable pacer or external
(V, software programmable)
Unipolar
N/A
0~10
Bipolar
±10
±5
Accuracy (% of FSR ±1LSB)
0.03
0.02
* Note: All channels should be set to the same range
0~5
±2.5
0.02
0~2.5
±1.25
0.03
0~1.25
±0.625
0.04
Analog Output




Channels
Resolution
Output Rate
Output Range
Internal
Reference
1
16 bits
Static update
(V, software programmable)
Bipolar
Unipolar
External Reference





10-24
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +xV @ +xV (-10 ≤ x ≤ 10)
-x ~ +xV @ +xV (-10 ≤ x ≤ 10)
20 V/µs
±20 mA
0.1 Ω max.
Software polling
INLE: ±1LSB
Plug-in I/O Cards
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 24 mA @ 0.8 V
Source: -15 mA @ 2.0 V
Counter/Timer





Channels
Compatibility
Resolution
Max. Input Frequency
Reference Clock
1
5 V/TTL
16 bits
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
General
Bus Type
I/O Connector Type
Dimensions
Power Consumption
Universal PCI 2.2
SCSI-68P female x 1
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max.: +5 V @ 1 A, +12 V @ 700 m A
 Operating Temperature 0 ~ 60° C (32 ~ 158° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70 °C (-4 ~ 185 °F)




 Storing Humidity
 Certifications
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
CE
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1741U
Ordering Information







PCI-1741U
PCI-1741S
PCL-10168-1
PCL-10168-2
ADAM-3968
PCLD-8710
PCLD-8710BNC
Pin Assignments
200k S/s, 16-bit high-resolution multifunction card
PCI-1741U with PCLD-8710 and PCL-10168 cable
SCSI-68 Shielded Cable, 1 m
SCSI-68 Shielded Cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
SCSI-68 wiring terminal w/CJC, DIN-rail mount
SCSI-68 wiring terminal w/CJC and BNC connectors,
DIN-rail mount
AI0
AI2
AI4
AI6
AI8
AI10
AI12
AI14
AIGND
AO0_REF
AO0_OUT
AOGND
DI0
DI2
DI4
DI6
DI8
DI10
DI12
DI14
DGND
DO0
DO2
DO4
DO6
DO8
DO10
DO12
DO14
DGND
CNT0_CLK
CNT0_OUT
CNT0_GATE
+12V
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
AI1
AI3
AI5
AI7
AI9
AI11
AI13
AI15
AIGND
NC
NC
NC
DI1
DI3
DI5
DI7
DI9
DI11
DI13
DI15
DGND
DO1
DO3
DO5
DO7
DO9
DO11
DO13
DO15
DGND
PACER_OU
TRG_GATE
EXT_TRG
+5V
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-25
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1742U
1 MS/s, 16-bit, 16-ch High-Resolution
Multifunction Card
Features
NEW
 16 single-ended, 8 differential or a combination of analog inputs
 16-bit A/D converter, with up to 1 MHz sampling rate
 Onboard FIFO memory (1024 samples)
 Auto calibration
 Two 16-bit analog output channels
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
 Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
 BoardID™ switch
Introduction
PCI-1742U is a powerful high-resolution multifunction DAS card for the PCI bus. Its sampling rate of up to 1 MS/s and 16-bit resolution, fulfill the needs of most data acquisition
applications. PCI-1742U provides 16 single-ended or 8 differential analog input channels, two 16-bit D/A output channels, 16 digital input/output channels, and one 10 MHz 16-bit
counter channel.
Specifications
Digital Input
Analog Input
 Channels
 Resolution
 Max. Sampling Rate






16 single-ended /8 differential (SW programmable)
16 bits
1 MS/s single-channel
800kS/s multi-channel
250kS/s unipolar bipolar mixed
1024 samples
FIFO Size
Overvoltage Protection
Input Impendence
100 MΩ/10pF (Off); 100 MΩ/100pF (On)
Sampling Mode
Software, onboard programmable pacer or external
Trigger Mode
Input Range
(V, Software programmable)
Unipolar
N/A
0~10
0~5
0~2.5
0~1.25
Bipolar
±10
±5
±2.5
±1.25
±0.625
Analog Output





Channels
Resolution
Output Rate
Reference Clock
Output Range
Internal Reference
2
16 bits
Static Update




10-26
Slew Rate
Driving Capability
Output Impendence
Operation Mode
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Capability
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max. @ +24 mA
Source: 2.4 V min. @ -15 mA
Counter/Timer





Channels
Compatibility
Resolution
Max. Input Frequency
Reference Clock
1
5V/TTL
16 bits
10 MHz
General
(V, Software programmable)
Bipolar
-5~+5, -10~+10
Unipolar




0~+5,0~+10
0 ~ +x V @ +x V (-10 < x <10)
-x ~ +x V @ +x V (-10 < x < 10)
External Reference
 Channels
 Capability
 Input Voltage
40 V/µs
±20mA
0.1 Ω max.
Single Output
Plug-in I/O Cards




Bus Type
I/O connector Type
Dimensions
Power Consumption
Universal PCI 2.2
68-pin SCSI-II female
175 mm × 100 mm (6.9" × 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max.: +5 V @ 1 A, +12 V @ 700m A
Operating Temperature 0 ~ +60°C (32 ~ 158°F) (refer to IEC 68-2-1,2)
Storing Temperature -20 ~ +85°C (-4 ~ 185°F)
Storing Humidity
5 ~ 95%RH non-condensing (refer to IEC 68-2-3)
Certificates
CE
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1742U
Ordering Information






PCI-1742U
PCL-10168
PCL-10168-2
ADAM-3968
PCLD-8710
PCLD-8710BNC
Pin Assignments
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
16-bit, 1MS/s Multifunction Card
SCSI-68 Shielded Cable, 1 m
SCSI-68 Shielded Cable, 2 m
SCSI-68 Wiring Terminal, DIN-rail Mount
SCSI-68 Wiring Terminal w/CJC, DIN-rail Mount
SCSI-68 Wiring Terminal w/CJC and BNC connectors,
DIN-rail Mount
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
PCI-1742U
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-27
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-711B
40 kS/s, 12-bit, ISA-bus Multifunction Card
Features
 8 single-ended analog inputs
 12-bit A/D converter, with up to 40 kHz sampling rate
 Programmable gain
 One 12-bit analog output channel
 16 digital inputs and 16 digital outputs
 Screw-terminal board and cable included
Introduction
PCL-711 offers four of the most popular I/O functions for PC/AT and compatible systems: A/D conversion, D/A conversion, digital input and digital output. The inexpensive PCL-711 is
ideal for entry level applications. The features of this half-sized card include: eight 12-bit analog inputs, one 12-bit analog output, 16 digital inputs and 16 digital outputs. In addition,
it comes with a 20-point screw-terminal board and a flat cable connector. PCL-711 performs a variety of I/O jobs, and features solid software support and a large selection of available
daughterboards and accessories. It is an ideal and affordable performer for OEMs, schools and hobbyists who require a combination of analog and digital I/O.
Specifications
General
Analog Input









Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range (V)
Accuracy
8 single-ended
12 bits
40 kS/s
0
±30 VDC
>10 MΩ
Software, pacer or external trigger
±5, ±2.5, ±1.25, ±0.625, ±0.3125
±2 LSB
Analog Output





Channels
Resolution
Output Rate
Output Range
Driving Capability
One double-buffered channel
12 bits
Static Update
0 ~ 5 V or 0 ~ 10 V
10 mA
Digital Input
 Channels
 Compatibility
 Input Voltage








Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
Box header 20P x 3
155 x 100 mm (6.1" x 3.9")
+5 V @ 500 mA typical, 1.0 A max.
+12 V @ 50 mA typical, 100 mA max.
-12 V @ 14 mA typical, 20 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Storing Humidity
CE
Certifications
Ordering Information
 PCL-711S
 PCL-711B
 PCL-10120-1
 PCL-10120-2
PCL-711B card, user’s manual, driver CD-ROM,
PCLD-7115 and 1 m 20-pin flat cable (PCL-10120-1)
40kS/s, 12-bit multifunction card
20-pin flat cable, 1 m
20-pin flat cable, 2 m
16
5 V/TTL
Logic 0: 0.8V max.
Logic 1: 2.0V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
10-28
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8 mA
Source: 0.4 mA
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-812PG
30 kS/s, 12-bit, ISA-bus Multifunction Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 16 single-ended analog inputs
 12-bit A/D converter, with up to 30 kHz sampling rate
 Programmable gain
 Two 12-bit analog output channels
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
 A/D with DMA or interrupt
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCL-812PG is a multifunction analog and digital I/O card that features the five most desired measurement and control functions for PC/AT and compatible systems: A/D conversion,
D/A conversion, digital input, digital output and counter/timer. This half-size card neatly packages 16 12-bit analog input channels, two 12-bit analog output channels, 16 digital
input channels, 16 digital output channels and a programmable counter/timer.
IPPC
FPM
In addition to all the features listed above, PCL-812PG offers the convenience of programmable analog input ranges, where the analog input range can be switched by software
commands instead of DIP switches. PCL-812PG also delivers convenience and maximum resolution for applications that need different gains for different channels or different gains
for different stages of a process. Comprehensive software support, numerous I/O options and a wide range of available daughterboards make the PCL-812PG ideal for industrial
AWS
applications that require a combination of analog and digital I/O.
Specifications
Digital Output
Analog Input








Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
 Accuracy
16 single-ended
12 bits
30 kS/s
0
±30 VDC
>10 MΩ
Software, pacer or external trigger
(V, software programmable)
±10, ±5, ±2.5, ±1.25, ±0.625, ±0.3125
0.01% of reading ±1 LSB
Analog Output




Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
 Driving Capability
2 double-buffered
12 bits
Software polling
(V, software programmable)
Unipolar
10 mA max.
Digital Input
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
0 ~ 5, 0 ~ 10
±10 max.




Channels
Compatibility
Output Voltage
Output Capacity
16
5 V/TTL
Logic 0: 0.5 V max., Logic 1: 2.4 V min.
Sink: 8.0 mA, Source: 0.4 mA
Plug-in I/O
1
16 bits
5 V/TTL
500 kHz
Internal: 2 MHz
External Frequency:10 MHz
External Voltage Range: 5V/TTL
Signal Conditioning
Counter/Timer





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
Box header 20P x 2
185 x 100 mm (7.3" x 3.9")
+5 V @ 500 mA typical, 1.0 A max.
+12 V @ 50 mA typical, 100 mA max.
 Operating Temperature 0 ~ 50° C (32 ~ 122° F)
 Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
 Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)




CompactPCI
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Ordering Information




PCL-812PG
PCL-10120-1
PCL-10120-2
PCLD-780
30 kS/s, 12-bit, multifunction card
20-pin flat cable, 1 m
20-pin flat cable, 2 m
Screw terminal board
Online Download www.advantech.com/products
10-29
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-818HD/HG
PCL-818L
100 kS/s, 12-bit ISA Multifunction Card
40 kS/s, 12-bit ISA Multifunction Card
Features
 16 single-ended or 8 differential analog inputs
 12-bit A/D converter, with up to 100 kHz sampling rate
 Programmable gain
 Automatic channel/gain scanning
 Onboard FIFO memory (1024 samples, PCL-818HD/HG only)
 One 12-bit analog output channel
 16 digital inputs and 16 digital outputs
 Onboard programmable counter
Introduction
The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same
functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD
and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes.
The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal
conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter.
Digital Output
Specifications
 Channels
 Compatibility
 Output Voltage
Analog Input







Channels
Resolution
Max. Sampling Rate
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
16 single-ended, or 8 differential
12 bits
40 kS/s for all input ranges
±30 VDC max.
10 MΩ
Software, pacer or external
(V, software programmable)
Bipolar
Accuracy (% of FSR ±1LSB)
±10
0.1
±5
0.1
±2.5
0.2
 Output Capability
Timer/Counter
±1.25
0.2
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
1
12 bits
Static update
(V, software programmable)
Unipolar
Digital Input
 Channels
 Compatibility
 Input Voltage
10-30
±0.625
0.4




Channels
A/D Pacer
Max. and Min. Rates
Counter
1
32-bit with 10 MHz or 1 MHz time base
2.5 MHz to 0.00023 Hz
One 16-bit counter with 100 kHz time base
General
Analog Output




16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 8 mA
Source: -0.4 mA
0 ~ 5, 0 ~ 10
0 ~ 10, 0 ~ -10
 Power Consumption





+5 V @ 210 mA typical, 500 mA max.
+12 V @ 20 mA typical, 100 mA max.
-12 V @ 20 mA typical, 40 mA max.
I/O Connector
DB37-F
Dimensions (L x H)
155 x 100 mm (6.1" x 3.9")
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature -20 ~ 65° C (-4 ~ 149° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Operating Humidity
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-818L
Ordering Information
 PCL-818L
 PCL-818LS




PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-8115
 PCLD-880
Low-cost high-performance half-size multi-function
card, user’s manual and driver CD-ROM. (cable not
included)
PCL-818L with PCLD-8115 and DB-37 cable
assembly (PCL-10137-1)
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
Industrial Wiring Terminal with CJC circuit and DB37
connector
Industrial Wiring Terminal with DB37 connector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-31
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1713
100 kS/s, 12-bit, 32-ch, Isolated
Analog Input Card
Features
 32 single-ended, 16 differential or a combination of analog inputs
 12-bit A/D converter, with up to 100 kHz sampling rate
 Programmable gain
 Onboard FIFO memory (4096 samples)
 Isolation protection (2500 VDC)
 S/W, internal or external pacer sampling modes supported
Introduction
The PCI-1713 is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 100 kS/s, 12-bit resolution and isolation
protection of 2500 VDC.
Specifications
Ordering Information
 PCI-1713
Analog Input






Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Isolation Protection
 Input Impedance
 Sampling Modes
 Input Range
32 single-ended/16 differential (SW programmable)
12 bits
100 kS/s
4096 samples
±30 V
2,500 VDC





PCLD-881B
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
100 kS/s, 12-bit, 32-channel Isolated Analog Input
Card, user’s manual and driver CD-ROM. (cable not
included)
Industrial Wiring Terminal Board (cable not included)
Wiring Terminal Board
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
1 GΩ
Software, onboard programmable pacer or external
(TTL level)
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
±10
0.01
0 ~10
±5
0.01
0~5
±2.5
0.02
0 ~ 2.5 0~1.25
±1.25 ±0.625
0.02
0.04
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
37-pin D-type female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA
Max: +5 V @ 1.0 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




Programmasle Pa
 Timer
 Timer Base
10-32
32-bit programmable timer
10 MHz
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1715U
500 kS/s, 12-bit, 32-channel
Isolated Analog Input Card
Features
NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 2500 VDC isolation protection
 32 single-ended or 16 differential analog inputs, or a combination
 12-bit resolution for A/D conversion
 Up to 500 kS/s sampling rate for A/D conversion
 Programmable gain for each input channel
 Onboard 1024 samples FIFO buffer
 S/W, internal or external pacer sampling modes supported
 Universal PCI Bus
BAS
UNO
RS-485 I/O
 BoardID™ switch
Ethernet I/O
TPC
Introduction
The PCI-1715U is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 500 kS/s, 12-bit resolution and isolation
protection of 2500 VDC.
Specifications
Ordering Information
 PCI-1715U
Analog Input






Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Isolation Protection
 Input Impedance
 Sampling Modes
 Input Range
32 single-ended /16 differential (SW programmable)
12 bits
500 kS/s
1024 samples
+/- 30 Vp-p
2,500 VDC





PCLD-881B
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
500 kS/s 12-bit, 32-channel Isolated Analog Input
Card, user’s manual and driver CD-ROM.
(cable not included)
Industrial Wiring Terminal Board (cable not included)
Wiring Terminal Board
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
1 GΩ
Software, onboard programmable pacer or external
(TTL level)
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
±10
0.01
0 ~10
±5
0.01
0~5
±2.5
0.02
0 ~ 2.5 0 ~ 1.25
±1.25 ±0.625
0.02
0.04
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
37-pin D-type female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA
Max: +5 V @ 1.0 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-33
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1714
PCI-1714UL
30 MS/s Simultaneous 4-ch Analog Input Card
10 MS/s Simultaneous 4-ch Analog Input Card
Features
 4 single-ended analog input channels
 12-bit A/D converter, with up to 30 MHz sampling rate
 Programmable gain
 Onboard FIFO memory
(PCI-1714: 32,768 samples PCI-1714UL: 8,192 samples, each channel)
 4 A/D converters simultaneously sampling
 Multiple A/D triggering modes
 Programmable pacer/counter
 BoardID™ switch
Introduction
PCI-1714 is an advanced high-performance data acquisition card based on the PCI bus. With a large FIFO of 32 K for each channel, the maximum sampling rate of PCI-1714 can get
up to 30 MS/s, on each channel, with an emphasis on continuous, non-stop, high-speed, streaming data of samples to host memory. The low-cost PCI-1714UL offers 10MS/s on
each channel at a stable rate, and has also been equipped with a universal PCI interface.
Specifications
Ordering Information
PCI-1714
PCI-1714UL
ADAM-3909
PCL-10901-1
PCL-10901-3
PCL-1010B-1
30 MHz Simultaneous 4-ch Analog Input card
10 MHz Simultaneous 4-ch Analog Input card
DB-9 Wiring Terminal for DIN-rail Mounting
PS2 to DB9 Wiring Cable, 1 m
PS2 to DB9 Wiring Cable, 3 m
BNC to BNC Wiring Cable, 1 m
 Channels
 Resolution
 Max. Sampling Rate







Pin Assignments
Analog Input





4 single-ended
12 bits
30 MS/s for PCI-1714
(Under 32,768 samples for ea. ch)
10 MS/s for PCI-1714UL
(Under 8,192 samples for ea. ch)
FIFO Size
PCI-1714: 32,768 samples for each channel
PCI-1714UL: 8,192 samples for each channel
Overvoltage Protection 30 Vp-p
Input Impedance
50 Ω/1 MΩ/Hi Z jumper selectable/100 pF
Sampling Modes
Software polling, pacer
Trigger Modes
Post-trigger, pre-trigger, delay-trigger, about-trigger
Input Range
(V, software programmable)
Bipolar
±5V
±2.5V
±1V
±0.5V
General
 Bus Type







10-34
PCI-1714: PCI V2.2
PCI-1714UL: Universal PCI V2.2
I/O Connectors
4 x BNC connector (for AI)
1 x PS/2 connector (for Ext. clock and trigger)
Dimensions
175 x 100mm (6.9” x 3.9”)
Power Consumption
Typical+5 V @ 850 mA ; +12 V @ 600 mA
Max.: +5 V @ 1 A ; +12 V @ 700m A
Operating Temperature 0 ~ 70° C (32 ~ 158° F)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Plug-in I/O Cards
PS/2
PS/2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1747U
250 kS/s, 16-bit, 64-ch Analog Input Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 64 single-ended, 32 differential or a combination of analog inputs
 16-bit A/D converter, with up to 250 kHz sampling rate
 Auto calibration
 Onboard FIFO memory (1024 samples)
 PCI-Bus mastering data transfer
 Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
 BoardID™ switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1747U is a high-resolution, high-channel-count analog input card for the PCI bus. Its sampling rate is up to 250 kS/s and 16-bit resolution provides the resolution needed for
most data acquisition applications. PCI-1747U provides 64 single-ended, 32 differential analog input channels or a combination of these. It also has built in a 1 K FIFO buffer for
analog input data.
Specifications
Ordering Information
 PCI-1747U
Analog Input








Channels
Resolution
Max. Sampling Rate FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
64 single-ended, 32 differential, or combination
16 bits
250 kS/s
1024 samples
30 Vp-p
100 MΩ/10 pF(Off); 100 MΩ/100 pF(On)
Software, onboard programmable pacer or external
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
±10
0.03
0~10
±5
0.02
0~5
±2.5
0.02
0~2.5
±1.25
0.03
 ADAM-3968
 PCL-10168-1
 PCL-10168-2
250 kS/s, 16-bit, 64-ch, analog input universal PCI
bus card
SCSI-68 wiring terminal, DIN-rail mount
SCSI-68 shielded cable, 1 m
SCSI-68 shielded cable, 2 m
0~1.25
±0.625
0.04
General








Bus Type
I/O Connector
Dimensions
Power Consumption
Universal PCI V2.2
68-pin SCSI-II female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max: +5 V @ 1 A, +12 V @ 700 m A
Operating Temperature 0 ~ 60 °C (32 ~ 158 °F) (refer to IEC 68-2-1,2)
Storing Temperature -20 ~ 70°C (-4 ~ 185°F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
IPPC
FPM
AWS
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-35
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-813B
32-ch S.E. Isolated Analog Input Card
Features
 32 single-ended analog input channels
 12-bit A/D converter, with up to 100 kHz sampling rate
 Isolation protection (500 VDC)
 Program-controlled A/D trigger and data transfer
Introduction
PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial
measurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an
integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high
voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes
with the PCLD-881 wiring terminal board and a DB-37 cable assembly.
Specifications
Ordering Information
 PCL-813B
Analog Input








Channels
Resolution
Max. Sampling Rate
Overvoltage Protection
Isolation Protection
Input Impedance
Sampling Modes
Input Range
32 single-ended
12 bits,
25 kHz
Continuous ±30 V (max.)
500 VDC from analog input to PC
> 10 MΩ
software trigger
(V)
Unipolar (jumper selection)
0 ~ 10





Typical application for PCL-813B:
0~5
0 ~ 2.5
0 ~ 1.25
±5
±2.5
Accuracy (% of FSR ±1LSB)
0.01
0.01
 Accuracy
0.01% of reading ±1 LSB
±1.25
±0.625
0.01
0.01
Bipolar (software selection)
PCLD-881B
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
32-ch. isolated analog input card, PCLD-881B wiring
terminal board, DB-37 cable assembly, manual and
driver CD-ROM.
Industrial terminal board for PCI-1713 & PCL-813B
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
DB37 wiring terminal for DIN-rail mounting
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
1 x DB37-F
219 x 100 mm (8.6” x 3.9”)
+5 V @ 660 mA max.
+12 V @ 140 mA max.
 Operating Temperature 0 ~ 50° C (32 ~ 122° F)
 Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
 Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)




10-36
Plug-in I/O Cards
Industrial 4 ~ 20 mA Output Device Monitoring
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1720U
4-ch Universal Isolated Analog Output Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 4 12-bit D/A output channels
 Multiple output ranges
 2,500 VDC isolation between the outputs and the PCI bus
 Keeps the output settings and values after system reset
 One DB37 connector for easy wiring
 Universal PCI and BoardID™ switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
The PCI-1720U provides four 12-bit isolated digital‑to‑analog outputs for the Universal PCI bus. With isolation protection of 2500 VDC between the outputs and the PCI bus, the
PCI-1720U is ideal for industrial applications where high-voltage protection is required.
IPPC
FPM
Specifications
Ordering Information






Analog Output




Channels
Resolution
Output Rate
Output Range
Internal Reference







4 isolated channels
12 bits
Static update
(Software programmable)
Unipolar (V)
0 ~ 5, 0 ~ 10
Bipolar (V)
±5, ±10
PCI-1720U
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
4-ch, 12-bit isolated Universal PCI analog output card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
DB37 Wiring terminal for DIN-rail mounting
Screw terminal board
Pin Assignments
Current Loop (mA)
0~ 20, 4 ~ 20
2 V/µs
Slew Rate
Isolation Protection
2,500 VDC (between the outputs and the PCI bus)
Driving Capability
±5 mA max.
Operation Modes
Software polling
Accuracy
±0.024%
Current Loop Excitation
Voltage
50 V (max.)
CompactPCI
USB I/O
Motion Control I/O
 Bus Type




Plug-in I/O
Signal Conditioning
General



AWS
PCI-1720: PCI V2.2
PCI-1720U: Universal PCI 2.2
I/O Connectors
1 x DB37-F
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
+5 V @ 350 mA (typical), 500 mA (max.)
+12 V @ 200 mA (typical), 350 mA (max.)
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storing Temperature -20 ~ +70° C (-4 ~ 158° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Online Download www.advantech.com/products
Ethernet Switch
EDG
ICOM
10-37
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1721
12-bit, 4-ch Advanced Analog Output Card
Features
 10 MHz maximum digital update rate
 PCI-bus mastering for data transfer
 Auto calibration function
 Four analog output channels with 1024 samples FIFO buffer
 A 12-bit DAC is equipped for each of analog output channels
 Real-time waveform output function with internal/external pacer
 Synchronized output function
 Flexible output types and range settings
 Keeps the output settings and values after system hot reset
 16-ch DI/O and one 10 MHz 16-bit resolution counter
 BoardID™ switch
Introduction
PCI-1721 is an advanced high-speed analog output card for the PCI bus, and each of analog output channels are equipped with a 12-bit, double-buffered DAC. It features many
powerful and unique functions, like a waveform output function with 10 MHz maximum update rate, auto-calibration and a BoardID switch. PCI-1721 is an ideal solution for industrial
applications where high-speed continuous analog output or real-time waveform output functions are required.
Specifications
Counter/Timer
Analog Output





Channels
Resolution
FIFO Size
Output Rate
Reference Clock
 Output Range
Internal Reference
4
12 bits
1024 samples
10 MHz or static update
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max., 2 V min.
(Software programmable)
Unipolar
0 ~ 5 V, 0 ~ 10 V,
Bipolar
±5 V, ±10 V
Current Loop
External Reference
0 ~ 20 mA, 4 ~ 20 mA
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
Slew Rate
Driving Capability Output Impedance Operation Modes
Accuracy
10 V/µs
±10 mA
0.1 Ω max.
Single/Continuous/Waveform/Synchronized output
Relative: ±1 LSB
Differential Non-Linearity: ±1 LSB (monotonic)
 Current Loop Excitation +15 V (external)
 Voltage





Digital Input/Output
 Channels
 Compatibility
 Input Voltage
 Output Capability
10-38
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V @ 24 mA
Source: 2.0 V @ -15 mA
Plug-in I/O Cards





Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max, 2.0 V min.
General








Bus Type
I/O Connectors
Dimensions
Power Consumption
PCI V2.2
1 x 68-pin SCSI-II female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max: +5 V @ 1 A, +12 V @ 700 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storing Temperature -20 ~ 85° C (-4 ~ 185° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Storing Humidity
CE
Certifications
Ordering Information




PCI-1721
PCL-10168-1
PCL-10168-2
ADAM-3968
4-ch, 12-bit advanced PCI analog output card
SCSI-68 shielded cable, 1 m
SCSI-68 shielded cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1723
16-bit, 8-ch Non-isolated
Analog Output Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 Auto calibration function
 A 16-bit DAC is equipped for each analog output channel
 Synchronized output function
 Output values retained after system hot reset
 2-port (16-channel) user-defined digital input/output
 BoardID™ switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1723 is a non-isolated multiple channel analog output card for the PCI bus, and each analog output channel is equipped with a 16-bit, double-buffered DAC. It also features an
auto-calibration function and a BoardID™ switch. The PCI-1723 is an ideal solution for industrial applications where multiple analog output channels are required.
IPPC
FPM
Specifications
Ordering Information




Analog Output




Channels
Resolution
Output Rate
Output Range
Internal Reference




Driving Capability
Output Impedance
Operation Modes
Accuracy
8
16 bits
Static update
(Software programmable)
Bipolar (V)
PCI-1723
PCL-10168-1
PCL-10168-2
ADAM-3968
16-bit, 8-ch Non-isolated Analog Output Card
SCSI-68 shielded cable, 1 m
SCSI-68 shielded cable, 2 m
SCSI-68 wiring terminal, DIN-rail mount
Pin Assignments
±10
Current Loop (mA)
0 ~ 20, 4 ~ 20
5 mA
0.1 Ω max.
Software polling, Synchronized output
Relative
±6 LSB
Differential Non-linearity ±6 LSB (monotonic)
Digital Input/Output
 Channels
 Compatibility
 Input Voltage
 Output Capability
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V @ 24 mA
Source: 2.0 V @ -15 mA




Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
General




AWS
EDG
Bus Type
I/O Connectors
Dimensions
Power Consumption
PCI V2.2
1 x 68-pin SCSI-II female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max.: +5 V @ 1 A, +12 V @ 700 mA
Operating Temperature 0 ~ 60° C (32 ~ 158° F) (IEC 68-2-1,2)
Storing Temperature -20 ~ 85° C (-4 ~ 185° F)
Storing Humidity
5 ~ 95 % RH non-condensing (IEC 68-2-3)
Certifications
CE
ICOM
Online Download www.advantech.com/products
10-39
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1724U
14-bit, 32-ch Isolated Analog Output Card
Features
 32 high-density analog output channels
 Flexible Output Range: +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA
 Synchronized output function
 Keeps output values after system hot reset
 BoardID™ switch
Introduction
PCI-1724U is an isolated high-density multiple channel analog output card for the PCI bus, where each analog output channel is equipped with a 14-bit DAC. It feaures optional
voltages, current output and a BoardID™ switch. PCI-1724U is an ideal solution for industrial applications where multiple analog output channels are required.
Specifications
Pin Assignments
Analog Output




Channels
Resolution
Output Rate
Output Range
Internal Reference
32 isolated
14 bits
Static update
(Software programmable)
Bipolar (V)
Current Loop (mA)
AGND
AO8
±10
0 ~ 20, 4 ~ 20
AO9
AGND
 Isolation Protection
1,500 VDC system isolation
AO10
 Output Impedance
 Operation Modes
 Accuracy
0.1 Ω max.
Software polling, synchronized output
Relative
+/- 4 LSB
Differential Non-linearity +/- 2 LSB (monotonic)
+/- 10 mA
AGND
 Driving Capacity
General







Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption Operating Temperature
Storing Temperature
Storing Humidity
 PCI-1724U
 PCI-10162
 ADAM-3962
AO11
AGND
AO12
AGND
AO13
AGND
Universal PCI V2.2
1 x 62-pin D-type
175 x 100 mm (6.9" x 3.9")
+5 V @ 400 mA, +12 V @ 270 mA max.
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
10-40
AGND
AO14
AGND
AO15
AGND
AGND
AGND
AGND
NC
AGND
AO0
AGND
AO1
AGND
AO2
AGND
AO3
AGND
AO4
AGND
AO5
AGND
AO6
AGND
AO7
AO24
AO25
AO26
AO27
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
AGND
AO16
AGND
AO17
AGND
AO18
AGND
AO19
AGND
AO20
AGND
AO21
AGND
AO22
AGND
AO23
AO28
AO29
AO30
AO31
14-bit, 32-ch isolated analog output Card
DB62 cable assembly (1 m, 3 m)
DB62 cable wiring terminal for DIN-rail mounting
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1727U
14-bit, 12-ch Analog Output PCI
Card with Digital I/O
Features
NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 12 independent analog output channels
 Fuse on each channel
 Universal PCI for 5 V and 3.3 V support
 BoardID™ switch
 Synchronized output function
 Supports PCL-727 compatible mode
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1727U provides twelve 14-bit analog output channels, and is pin-compatible with the ISA PCL-727 card for easy migration. It supports both +/-10V and 0 ~ 20mA current loop
(sink). The card’s on board DC-to-DC converter ensures the full 10V D/A output is always available.
IPPC
Each analog output channel has a built-in fuse to protect the circuit, PC and the external devices. PCI-1727U is an ideal, economical solution for the applications which require FPM
multiple PID control loops.
In addition to its analog outputs, PCI-1727U provides 16 TTL DI and 16 TTL DO channels that are easily applied with industrial on/off control applications.
AWS
Specifications
Analog Output
 Channels
 Resolution
 Output Rate
 Output Range
Internal Reference




Slew Rate
Driving Capability
Operation Modes
Current Loop Excitation Voltage
PCI-1727U: 12
PCL-727: 12
PCI-1727U: 14 bits
PCL-727: 12 bits
Static output
(Software programmable)
Bipolar (V)
Current Loop (mA)
 Input loading
16
5 V/TTL
Logic 0: 0.8 V max
Logic 1: 2.0 V min.
0.5 V @ 0.4 mA max. (low)
2.7 V @ 50 µA max (high)
Digital Output




Channels
Compatibility
Output Voltage
Output Capability
 Bus Type


±10
0 ~ 20
0.7 V/µs
15 mA
Software polling, synchronized output
8 ~ 36 V
Digital Input
 Channels
 Compatibility
 Input Voltage
Plug-in I/O
General
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.8 mA @ 0.5 V
Source: 0.4 mA @ 2.4 V




PCI-1727U: Universal PCI V2.2
PCL-727: ISA
1 x 37-pin D-type female
I/O Connectors
2 x 20-pin male ribbon cable connectors
PCI-1727U
Power Consumption
+5 V @ 460 mA typical,500 mA max
+12 V @ 150 mA typical,100 mA max
PCL-727
+5 V @ 500 mA typical, 1A max
+12 V @50 mA typical, 110 mA max
-12 V @ 14 mA typical, 90 mA max
PCI-1720U: 175 × 100 mm (6.9" ×3.9")
Dimensions
PCL-727: 340 x 100 mm (13.4" x 3.9")
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature PCI-1727U: -20 ~ 65° C (-4 ~ 149° F)
PCL-727: 0 ~ 65° C (32 ~ 149° F)
5 ~ 95% RH, non-condensing
Storing Humidity
Ordering Information







PCI-1727U PCL-10120-1 PCL-10137-1 ADAM-3937 PCLD-780 PCLD-782 PCLD-785 12-ch, 14-bit Universal PCI analog output card
20-pin flat cable, 1 m
DB37 cable assembly, 1 m
DB37 wiring terminal for DIN-rail mounting
Two 20-pin screw terminal board
Opto-isolated D/I board
Relay output board
Online Download www.advantech.com/products
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
10-41
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-726
PCL-728
6-ch Analog Output Card with Digital I/O
2-ch Isolated Analog Output Card
Features
 Independent analog output channels
 12-bit resolution double-buffered D/A converter
 Multiple voltage ranges: ±10 V, ±5 V, 0 ~ +5 V, 0 ~ +10 V and 4 ~ 20 mA
current loop (sink)
 16 digital input and 16 digital output channels (PCL-726)
 Two DB9 connectors for easy wiring (PCL-728)
PCL-726
PCL-728
Introduction
PCL-726, and PCL-728 are analog output cards with 12-bit analog output channels. You can individually configure each channel to any of the following ranges: 0 to +5 V, 0 to +10
V, ±5 V, ±10 V and 4 to 20 mA current loop (sink). Designed for use in industrial environments, these cards are ideal, economical solutions for applications that require multiple
analog outputs or current loops.
Specifications
General
 Bus Type
 I/O Connectors
Analog Output




Channels
Resolution
Output Rate
Reference Clock
6
12 bits, double buffered
Static update
Internal:
External Clock Frequency:
External Voltage Range:
(Software programmable)
 Output Range
Internal Reference
 Dimensions (L x H)
Bipolar (V)
+/-5, +/-10
Unipolar (V)
0 ~ 5, 0 ~ 10
Current Loop (mA)
Slew Rate
Driving Capability
Output Impedance
Operation Modes
Accuracy
4 ~ 20
0.3 V/µs
±5 mA max.
0.1 Ω
Software polling
Relative: ±0.012% full scale range
Differential Linearity: ±½ bit
 Current Loop Excitation Minimum +8 V, maximum +36 V for 4 ~ 20 Voltage mA
Voltage
current loop





Digital Input (PCL-726)
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output (PCL-726)




10-42
Channels
Compatibility
Output Voltage
Output Capability
ISA
4 x 20-pin male ribbon cable connectors
PCL-728: 2 x DB9 connectors
PCL-726: 340 x 100 mm (13.4" x 3.9")
PCL-728: 184 x 119 mm (7.25" x 4.7")
 Power Consumption
PCI-726:
+5 V @ 500 mA typical, 1 A max.
+12 V @ 80 mA typical, 110 mA max.
-12 V @ 60 mA typical, 90 mA max.
PCL-728:
+5V @ 800 mA max.
 Operating Temperature 0 ~ 50° C (32 ~ 122° F)
 Storing Temperature 0 ~ 65° C (32 ~ 149° F)
 Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
 PCL-726
 PCL-728








PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-880
ADAM-3909
ADAM-3920
6-ch analog output card with digital I/O, user manual
and driver CD-ROM (cable not included)
Isolated 2-ch analog output card, user manual and
driver CD-ROM (cable not included)
20-pin flat cable, 1 m
20-pin flat cable, 2 m
Screw terminal board
Opto-Isolated D/I board (16-ch)
Relay output board (16-ch)
Universal screw terminal board
DB9 wiring terminal for DIN-rail mounting
20-pin wiring terminal for DIN-rail mounting
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.5 V @ 0.4 mA max.
Source: 2.7 V @ 50 mA max.
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1735U
64-ch Digital I/O and Counter PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 32 TTL-level digital input channels
 32 TTL-level digital output channels
 High-output driving capacity
 Low-input loading
 3 programmable counter/timer channels
 User configurable clock source
 Breadboard area for custom circuits
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
IPPC
The PCL-720+ and PCI-1735U digital I/O and counter cards are PC-compatible add-on cards with 32 digital input channels, 32 digital output channels and three programmable
counter/timer channels. Their digital I/O channels are TTL-compatible and use 74LS244 driver/buffer circuits to provide high output driving capacity. These buffered circuits also
require lower input loading current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three flexible 16-bit counter/timer channels. You can generate
FPM
waves and pulses by programming the 8254. Jumper settings determine the clock crystal frequency. The cards also includes a breadboard area perfect for customized circuits.
Specifications
AWS
General
Digital Input
 Channels
 Compatibility
 Input Voltage
32
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
Plug-in I/O

CompactPCI






32
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max @ 24 mA
Source: 2.0 V min. @ 15 mA
540 (30 x 18) plated-through "donuts", each with a
.036" hole on 0.10" centers. Further, provide +5 V on
the left side, and provide GND on the right side
Bus Type
PCI-1735U: Universal PCI V2.2
PCL-720+: ISA
I/O Connectors
5 x 20-pin male ribbon-cable connectors
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Max: +5 V @ 98.8 mA
Operating Temperature 0 ~ 65° C (32 ~ 149° F)
Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
Counter/Timer
Channels
3
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency 1 MHz
Reference Clock
Internal: Selectable 1 MHz, 100 kHz, or 10 kHz base clock
External Clock Frequency: Jumper selectable divider: x2, x1, x0.5, and x0.25
 Programmable Counter 6
Modes





 Breadboard Area









PCI-1735U
PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-786
PCLD-885
ADAM-3920
64-ch TTL Digital I/O Card w/Counter
IDC-20 Flat Cable, 1 m
IDC-20 Flat Cable, 2 m
2*IDC-20 Wiring Terminal
Opto-Isolated D/I Board
16-ch Relay Output Terminal
SSR and Relay Driver Board
16-ch Power Relay Output Terminal
20-Pin Flat Cable Terminal, DIN-rail Mount
Online Download www.advantech.com/products
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
10-43
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1737U
24-ch Digital I/O Card
Features
 24 TTL digital I/O channels
 Emulates mode 0 of 8255 PPI
 Interrupt handling
 Opto-22 compatible 50-pin connectors
 Output status readback
 PCI universal card
Specifications
Ordering Information
Digital Input
 Channels
 Compatibility
 Input Voltage
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 1
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
24 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA







PCI-1737U
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
24-ch TTL Digital I/O Card
IDC-50 Flat Cable, 1.2 m
16/24-ch Opto-isolated DI Board
24/16-ch. relay output board
16-ch SSR Carrier Module Board
16-ch Power Relay Output Terminal
50-Pin Flat Cable Terminal, DIN-rail Mount
Pin Assignments
General
 Bus Type






10-44
PCI-1737: Universal PCI V2.2
PCL-724: ISA
I/O Connectors
50-pin male ribbon-cable connector
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Max: +5 V @ 294.9 mA
Operating Temperature 0 ~ 65° C (32 ~ 149° F)
Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1739U
48-ch Digital I/O PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 48 TTL digital I/O channels
 Emulates mode 0 of 8255 PPI
 Interrupt handling
 Opto-22 compatible 50-pin connectors
 Output status readback
BAS
UNO
 PCI universal card
RS-485 I/O
Ethernet I/O
TPC
Specifications
Ordering Information







Digital Input
 Channels
 Compatibility
 Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 2
PCI-1739U
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
48-ch TTL Digital I/O Card
IDC-50 Flat Cable, 1.2 m
16/24-ch Opto-isolated DI Board
16/24-ch Relay Output Terminal
16/24-ch Relay Output Terminal
16-ch Power Relay Output Terminal
50-Pin Flat Cable Terminal, DIN-rail Mount
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
Storing Humidity
FPM
AWS
Plug-in I/O
CompactPCI
General







IPPC
PCI V2.2
2 x 50-pin male ribbon-cable connectors
175 x 100 mm (6.9” x 3.9”)
Max: +5 V @ 540.8 mA
0 ~ 65° C (32 ~ 149° F)
-25 ~ 80° C (-13 ~ 176° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-45
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1751
48-bit Digital I/O and Counter Card
Features
 48 TTL digital I/O lines
 Emulates mode 0 of 8255 PPI
 Buffered circuits for higher driving capacity than 8255
 Interrupt handling
 Timer/Counter interrupt capability
 Supports both dry and wet contact
 Keeps the I/O port setting and DO state after system reset
 Universal PCI & BoardID switch
Introduction
PCI-1751U is a 48-bit digital I/O card for the PCI bus. Its 48 bits are divided into six 8-bit I/O ports and users can configure each port as input or output via software. PCI-1751 also
provides one event counter and two 16-bit timers, which can be cascaded to become a 32-bit timer. PCI-1751 adds a universal PCI interface for 3.3 V compatibility.
Specifications
Digital Input
General
 Channels
 Compatibility
 Input Voltage




48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2 V min.
 Interrupt Capable Ch. 2
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V @ 24 mA
Source: 2.4 V @ 15 mA
Counter/Timer
 Channels
 Resolution
3
2 x 16-bit counters, or 1 x 32-bit counter
(Jumper selectable)
1 x 16-bit event counter
 Compatibility
5 V/TTL
 Max. Input Frequency 10 MHz
 Reference Clock
Internal: 10 MHz
External Clock Frequency: 10 MHz
External Voltage Range: 5 V/TTL
10-46
Plug-in I/O Cards
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
68-pin SCSI-II female connector (Centronics type)
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max: 5 V @ 1.0 A
 Operating Temperature 0 ~ 70° C (32 ~ 158° F)
 Storing Temperature -20 ~ 80° C (-4 ~ 176° F)
 Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
 PCI-1751
 PCL-10168
 ADAM-3968
 ADAM-3968/20
 ADAM-3968/50
 PCLD-8751
 PCLD-8761
48-bit universal digital I/O card and Counter Card,
68-pin SCSI cable, 1 and 2 m
68-pin SCSI cable wiring terminal for DIN-rail
mounting
68-pin SCSI-II to three 20-pin Wiring Terminal Module
for DIN-Rail Mounting
68-pin SCSI to 2 x 50-pin box headers converter
module
48-ch Isolated DI Board
24-ch Replay and 24-IDI Board
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1753
PCI-1753E
96-ch Digital I/O Card
96-ch Digital I/O Extension Card for PCI-1753
Features
 Up to 192 (96 + 96) TTL digital I/O lines
 Emulates mode 0 of 8255 PPI
 Buffered circuits for higher driving capacity than 8255
 Multiple-source interrupt handling
 Interrupt output pin for simultaneously triggering external devices with the
interrupt
 Output status read-back
 “Pattern match” and “Change of state” interrupt functions for critical I/O
monitoring
 Keeps I/O setting and digital output values when hot system reset
 Supports dry contact and wet contact
 High-density 100-pin SCSI connector
PCI-17153
PCI-1753E
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be extended to 192 digital I/O channels by connecting its extension board - PCI-1753E. The card emulates mode 0
of the 8255 PPI chip, but the buffered circuits offer a higher driving capability than the 8255. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2,
C2, A3, B3 and C3. You can configure each port as input or output via software.
Specifications
Pin Assignments
 Programming Mode
 Compatibility
 Input Voltage
 Output Voltage
 Output Capability
96 digital I/O lines for PCI-1753
192 digital I/O lines if extending with PCI-1753E
8255 PPI mode 0
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.44 V max.
Logic 1: 3.76 V min.
Sink: 0.44 V max. @ 24 mA
Source: 3.76 V min. @ 24 mA
Plug-in I/O
CompactPCI
Signal Conditioning
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 100-pin SCSI female connector (Centronics™)
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 400 mA
Max: +5 V @ 2.7 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F) (refer to IEC 68-2-3)
 Storing Humidity
5 ~ 95% RH, non-condensing




Ordering Information
 PCI-1753




PCI-1753E
PCL-10268
ADAM-3968
ADAM-3968/20
 ADAM-3968/50
 PCLD-8751
 PCLD-8761
FPM
AWS
Digital Input/Output
 I/O Channels
IPPC
USB I/O
Motion Control I/O
Ethernet Switch
EDG
96 ch. Digital I/O Card, user’s manual and driver
CD-ROM. (cable not included)
Extension Board for PCI-1753
100-pin to 2x68-pin SCSI cable, 1 and 2m
SCSI-68 wiring terminal, DIN-rail mount
68-pin SCSI-II to Three 20-pin Wiring Terminal
Module for DIN-Rail Mounting
68-pin SCSI wiring terminal for DIN-rail mounting
48-ch Isolated DI Board
24-ch Relay and 24-IDI Board
Online Download www.advantech.com/products
ICOM
10-47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1755
Ultra-Speed 32-ch Digital I/O Card
Features
 Bus-mastering DMA data transfer with scatter gather technology
 32/16/8-bit Pattern I/O with start and stop trigger function, 2 modes
Handshaking I/O Interrupt handling capability
 Onboard active terminators for high speed and long distance transfer
 Pattern match and Change state detection interrupt function
 General-purpose 8-ch DI/O
Introduction
The PCI-1755 supports PCI-bus mastering DMA for high-speed data transfer. By setting aside a block of memory in the PC, the PCI-1755 performs bus-mastering data transfers
without CPU intervention, setting the CPU free to perform other more urgent tasks such as data analysis and graphic manipulation. The function allows users to run all I/O unctions
simultaneously at full speed without losing data.
Specifications
Channels
Number of Ports
I/O Configuration
Onboard FIFO
Transfer
Characteristics
Handshaking Mode
Normal Mode
Chang Detection
(DI only)
Trigger Capability
Terminator
Messaging
Input Voltage
10-48
32 TTL compatible
Port A, Port B, Port C and Port D (8 bits/port)
32DI (PA~PD) (default); 32DO (PA~PD); 16DI (PA~PB) & 16DO (PC~PD);
8DI (PA) & 8DO (PC) (Programmable)
16 KB for DI & 16 KB DO channels
Data Transfer Mode
Bus Mastering DMA with Scatter-Gather
Data Transfer Bus Width 8/16/32 bits (programmable)
DI: 80 M bytes/sec, 32-bit @ 20 MHz
120 M bytes/sec, 32-bit @ 40 MHz external pacer when data
Max. Transfer Rate
length is less than FIFO size
DO: 80 MBytes/sec, 32-bit @ 20 MHz
Operation Mode
Handshaking
Finite transfer, Continuous
Direction
I/O
Samples No.
I/O
Asynchronous
8255 Emulation
Synchronous Burst Handshaking
Internal: 30 MHz, 20 MHz, 15 MHz, 12 MHz, 10 MHz, Timer#0
Clock source for
for DI & Timer#1 for DO
Burst Handshaking
External: EXT_CLKIN for DI & EXT_CLKOUT for DO
Data Acquisition at a predetermined rate by internal/external
Input
clock
Waveform Generation at a predetermined rate by internal/external
Output
clock
Internal: 30 MHz, 20 MHz, 15 MHz, 12 MHz, 10 MHz, Timer#0
Clock Source for DI
External: EXT_CLKIN
Clock Source
Internal: 30 MHz, 20 MHz, 15 MHz, 12 MHz, 10 MHz, Timer#1
for DO
External: EXT_CLKOUT
Software command/Trigger signal occurred from DI_STR or
Start Mode
DO_STR/Pattern DI
Software command/Trigger signal occurred from DI_STP (for DI)
Stop Mode
or DO_STR (for DO)/Pattern DI/”Finite transfers”
Monitor the selected input channel and capture data whenever there is a transition on one
of the channels, and then issue a IRQ
Internal: 30 MHz, 20 MHz, 15 MHz, 12 MHz, 10 MHz, Timer#0
Clock Source for DI
External: EXT_CLKIN
Software command/Trigger signal occurred from DI_STP/Pattern
Start Mode
DI
Software command/Trigger signal occurred from DI_STP/
Stop Mode
PatternDI/”Finite transfers”
DO trigger
DI trigger signal
DI_STR, DI_STP
DO_STR, DO_STP
signal
Low
0.8 V max.
High
2.0 V min.
Rising or falling edge, or digital pattern
Trigger Type
(for DI only)
Pulse width for
10 ns min.
edge triggers
Pattern trigger
detection
Detect pattern match or mismatch on user-selected data lines
capabilities
Onboard Schottky diode termination
The messages can be generated when1. A specified number of bytes have been transferred,
2. When a specified input pattern is matched, 3. When a measurement operation completes.
Low
0 V min.;0.8 V max. High
2.0 V min.;5 V max.
Plug-in I/O Cards
Input Load
Terminator OFF: TTL compatible
Low
+0.5 V @ ±20 mA
Terminator ON
Terminator Resistor
110 Ω
Output Voltage
Low
+0.5 V @ ±22.4
mA
0.5 V max.
Driving Capacity
Low
0.5 V max @ +48
Low
High
+2.7 V @ ±1 mA max.
Termination
Voltage
2.9 V
High
+2.7 V @ ±1 mA max.
High
2.7 V min.
High 2.4 V min. @ -15 mA
(source)
mA (sink)
Power Available at
Hysteresis
500 mV
+4.65 ~ +5.25 VDC @ 1A
I/O connector
DI Channels
DI0 ~ DI7 (TTL compatible)
General-purposeDI/O
DO Channels
DO0 ~ DO7 (TTL compatible)
DI0~7 and Timer#2, Pattern match and Change detection, DI FIFO overflow and DO FIFO
Interrupt Source
underflow, DI_STP and DO_STP
Pacer






Channels
Timer#0
Timer#1
Timer#2
Resolution
Base Clock
Timer#0, Timer#1 and Timer#2
Timer pacer for digital input
Timer pacer for digital output
Interrupt source
16-bit
10 MHz
General
I/O Connector Type
Dimensions (L x H)
Power Consumption
Temperature
Relative Humidity
100-pin SCSI-II female
175 x 100 mm (6.9” x 3.9”)
Terminator OFF:
+5 V @ 1 A
Typical
Terminator ON:
+5 V @ 1 A
0 ~ 60° C (32 ~ 140° F)
Operating
(refer to IEC 68-2-1,2)
5 ~ 95% RH non-condensing
(refer to IEC 68-2-3)
Terminator OFF:
+5 V @ 1 A
Terminator ON:
+5 V @ 1 A
-20 ~ 85° C
Storage
(-4 ~ 185° F)
Max.
Cert.
FCC, CE certified
Ordering Information
 PCI-1755
 ADAM-39100
 PCL-101100-1
Ultra-speed 32-ch Digital I/O Card
PCI-1755 Wiring Terminal for DIN-rail Mounting
100-pin SCSI-II cable with male connectors on both
ends and special shielding for noise reduction, 1 m
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1757UP
24-ch Digital Input/Output Low
Profile Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 Low profile PCI form factor
 Universal PCI bus
 24 TTL level digital I/O channels
 Emulates mode 0 of 8255 PPI
 Buffered circuits provide higher driving capability
 Output status read-back
 I/O configurable by software or on board DIP switch
 Keeps port I/O settings and digital output states after hot reset
 BoardID™ switch
 Convenient DB-25 connector
BAS
UNO
RS-485 I/O
Ethernet I/O
 Dry/wet contact support
TPC
Introduction
PCI-1757UP is a 24-channel DI/O low profile PCI card that meets the PCI standard REV.2.2 (universal PCI expansion card). The card also works with 3.3 V and 5 V PCI slots, and
provides you with 24 parallel digital input/output channels that emulate mode 0 of the 8255 PPI chip. However, the buffered circuits offer a higher driving capability than the 8255.
IPPC
FPM
Specifications
Ordering Information






Digital Input
 Channels
 Compatibility
 Input Voltage
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V @ -0.2 mA
Logic 1: 2.0 V @ 20 mA
 Interrupt Capable Ch. 2
 Output Capability
24-channel digital input/output card
DB25 Wiring terminal for DIN-rail mounting
DB25 cable assembly, 1 m
24/16-ch. opto-isolated digital input board
24/16-ch. relay output board
DB25 to IDC50 flat cable for PCI-1757UP, 1 m
Pin Assignments
Digital Output
 Channels
 Compatibility
 Output Voltage
PCI-1757UP
ADAM-3925
PCL-10125-1
PCLD-782B
PCLD-785B
PCL-12125-1 24 (shared with input)
5 V/TTL
Logic 0: 0.5 V max. @ -24 mA
Logic 1: 3.7 V max. @ 24 mA
Sink: 24 mA
Source: 15 mA
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
General
Bus Type
I/O Connectors
Dimensions
Power Consumption
Universal PCI V2.2
1 x DB-25 female
119.91 x 64.41 mm (4.721" x 2.536") Low profile MD1
Typical: 5 V @ 140 mA
Max: 5 V @ 200 mA
 Operating Temperature 0 ~ 70° C (32 ~ 158° F)
 Storing Temperature -20 ~ 80° C(-4 ~ 176° F)
 Storing Humidity
5 ~ 95% non-condensing




AWS
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-720+
64-ch TTL Digital I/O Card w/Counter
Features
 32 TTL-level digital input channels
 32 TTL-level digital output channels
 High-output driving capacity
 Low-input loading
 3 programmable counter/timer channels
 User configurable clock source
 Breadboard area for custom circuits
Introduction
The PCL-720+ digital I/O and counter cards are PC-compatible add-on cards with 32 digital input channels, 32 digital output channels and three programmable counter/timer
channels. Their digital I/O channels are TTL-compatible and use 74LS244 driver/ buffer circuits to provide high output driving capacity. These buffered circuits also require lower
input loading current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three flexible 16-bit counter/timer channels. You can generate waves and pulses
by programming the 8254. Jumper settings determine the clock crystal frequency. The cards also includes a breadboard area perfect for customized circuits.
Specifications
General
Digital Input
 Channels
 Compatibility
 Input Voltage
32
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
32
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max @ 24 mA
Source: 2.0 V min. @ 15 mA







540 (30 x 18) plated-through "donuts", each with a
.036" hole on 0.10" centers. Further, provide +5 V on
the left side, and provide GND on the right side
Bus Type
PCI-1735U: Universal PCI V2.2
PCL-720+: ISA
I/O Connectors
5 x 20-pin male ribbon-cable connectors
Dimensions (L x H)
185 x 100 mm (7.3” x 4”)
Power Consumption
Typical: +5 V @ 500 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storing Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
Counter/Timer
Channels
3
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency 1 MHz
Reference Clock
Internal: Selectable 1 MHz, 100 kHz, or 10 kHz base clock
External Clock Frequency: Jumper selectable divider: x2, x1, x0.5, and x0.25
 Programmable Counter 6
Modes





10-50
 Breadboard Area
Plug-in I/O Cards









PCL-720+
PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-786
PCLD-885
ADAM-3920
64-ch TTL Digital I/O Card w/Counter
IDC-20 Flat Cable, 1 m
IDC-20 Flat Cable, 2 m
2*IDC-20 Wiring Terminal
Opto-Isolated D/I Board
16-ch Relay Output Terminal
SSR and Relay Driver Board
16-ch Power Relay Output Terminal
20-Pin Flat Cable Terminal, DIN-rail Mount
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-722
144-ch TTL Digital I/O ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 Emulates 8255 PPI mode 0
 Buffered circuits for higher driving capacity than the 8255
 Interrupt handling
 Output status readback
 Pin compatible with Opto-22 I/O module racks
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Specifications
Ordering Information
Digital Input
 Channels
 Compatibility
 Input Voltage
144 (24 channels x 6 ports) shared with output
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. Bits 0 and 3 of Port C can generate an interrupt to IRQ
2, 3, 4, 5, 6 or 7







PCL-722
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
144-ch TTL digital I/O ISA card
50-pin flat cable, 1.2 m
24/16-ch. opto-isolated digital input board
24/16-ch. relay output board
16-ch. carrier board for SSR I/O modules
16-ch. power relay (Form A) output board
50-pin flat cable wiring eterminal for din-rail mounting
Digital Output
 Channels
 Compatibility
 Output Voltage
Port A, B
Port C
 Output Capability
Port A, B
Port C
IPPC
FPM
AWS
Plug-in I/O
144 (24 channels x 6 ports) shared with input
5 V/TTL
CompactPCI
Logic 0: 0.5 V max.
Logic 1: 2.4 V min.
Logic 0: 0.4 V max.
Logic 1: 2.0 V min.
Signal Conditioning
Sink: 12 mA
Source: 8 mA
Sink: 24 mA
Source: 15 mA
USB I/O
General
 Power Consumption
Typical: +5 V @ 1.3 A
Max: +5 V @ 1.8 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
 Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
 I/O Connectors
6 x 50-pin male ribbon-cable connectors. Pin
assignments are fully compatible with Opto-22 I/O
module racks
 Dimensions (L x H)
334 x 100 mm (13.2" x 3.9")
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-51
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-724
24-ch Digital I/O Card
Features
 24 TTL digital I/O channels
 Emulates mode 0 of 8255 PPI
 Interrupt handling
 Opto-22 compatible 50-pin connectors
 Output status readback
Specifications
Ordering Information
Digital Input
 Channels
 Compatibility
 Input Voltage
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 1
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
24 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA







PCL-724
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
24-ch TTL Digital I/O Card
IDC-50 Flat Cable, 1.2 m
16/24-ch Opto-isolated DI Board
24/16-ch. relay output board
16-ch SSR Carrier Module Board
16-ch Power Relay Output Terminal
50-Pin Flat Cable Terminal, DIN-rail Mount
Pin Assignments
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
50-pin male ribbon-cable connector
125 x 100 mm (4.9" x 3.9")
Typical: +5 V @ 0.5 A
Max: +5 V @ 0.8 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)




10-52
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-731
48-ch Digital I/O ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 48 TTL digital I/O channels
 Emulates mode 0 of 8255 PPI
 Interrupt handling
 Opto-22 compatible 50-pin connectors
 Output status readback
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Specifications
Ordering Information







Digital Input
 Channels
 Compatibility
 Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 2
PCL-731
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
48-ch TTL Digital I/O Card
IDC-50 Flat Cable, 1.2 m
16/24-ch Opto-isolated DI Board
16/24-ch Relay Output Terminal
16/24-ch Relay Output Terminal
16-ch Power Relay Output Terminal
50-pin Flat Cable Terminal, DIN-rail Mount
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA
FPM
AWS
Plug-in I/O
CompactPCI
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
2 x 50-pin male ribbon-cable connectors
185 x 100 mm (7.3" x 3.9")
Typical: +5 V @ 0.5 A
Max: +5 V @ 0.8 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)




IPPC
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-53
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1730
PCI-1733
PCI-1734
32-ch Isolated Digital I/O PCI Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
Features
 32-ch Isolated DI/O (16 inputs and 16 outputs)
 32-ch TTL Isolated DI/O (16 inputs and 16 outputs)
 High output driving capacity
 Interrupt capability
 Two 20-pin connectors for isolated digital I/O channels and two for TTL
digital I/O channels
 D-type connector for isolated input and output channels
 High-voltage isolation on output channels
PCI-1730
PCI-1733
PCI-1734
Introduction
PCI-1730, PCI-1733, and PCI-1734 offer isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal
for industrial applications where high-voltage isolation is required. There are also 32 TTL DIO channels.
Specifications
Digital Input
General
 Channels
 Compatibility
 Input Voltage
 Bus Type
 I/O Connectors
16 (16-ch/group)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 2 (DI0, DI1)
Isolated Digital Input
 Channels
 Input Voltage




16 (16-ch/group)
Logic 0: 1 V max. (2 V max.)
Logic 1: 5V min. (30 V max.)
Interrupt Capable Ch. 2 (IDI0, IDI1)
Isolation Protection
2,500 VDC
Opto-Isolator Response 25 μs
Input Resistance
2.7 kΩ @ 1 W
Digital Output
 Channels
 Compatibility
 Output Voltage
16 (16-ch/group)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 24 mA
Source: 15 mA
 Output Capability
Isolated Digital Output






10-54
Channels
16 (16-ch/group)
Output Type
Sink type (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
200 mA max./channel
Opto-Isolator Response 25 ms
Plug-in I/O Cards





PCI V2.2
1 x 37-pin D-type female
2 x 20-pin box header for flat cable
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 250 mA, 12 V @ 35 mA
Max: 5 V @ 400 mA, 12 V @ 60 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storing Temperature -25 ~ 85° C (-13 ~ 185° F)
Storing Humidity
5 ~ 95% RH, non-condensing (see IEC 68-2-3)
Ordering Information
 PCI-1730













PCL-10120-1
PCL-10120-2
PCLD-782
ADAM-3920
PCLD-885
PCLD-785
PCLD-786
PCLD-780
PCLD-880
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
32-ch Isolated DIO Card, manual and driver CD-ROM
(cable not. included.)
20-pin flat cable, 1 m
20-pin flat cable, 2 m
16-ch opto-isolated D/I board
20-pin flat cable wiring terminal for DIN-rail mounting
16-ch power relay (form A) output board
16-ch relay output board
8-ch SSR I/O module carrier board
Universal screw terminal board
Universal screw terminal board
DB37 wiring terminal for DIN-rail mounting
DB37 cable, 1 m
DB37 cable, 2 m
DB37 cable, 3 m
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1736UP
32-ch Low-Profile Isolated
Digital I/O Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 32 isolated DI/O channels (16 inputs and 16 outputs)
 High output driving capacity
 High-voltage isolation on I/O channels (2500 VDC)
 Interrupt handling capability
 D-type connector for isolated input and output channels
 Keep digital output values when hot system reset
 Wide input range (5 ~ 30 VDC)
 Surge protection
BAS
UNO
RS-485 I/O
 Universal PCI Bus
 Low profile card
Ethernet I/O
 BoardID™ switch
TPC
Introduction
PCI-1736UP offer isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes it ideal for industrial applications
where high-voltage isolation is required. In addition, all output channels provide high-voltage protection. The low profile PCI form factor and universal PCI connector (V2.2 compliant)
meet requirements for size and power consumption.
Specifications
Ordering Information
Isolated Digital Input
 PCI-1736UP  PCL-10144-1
 ADAM-3944
 Channels
 Input Voltage




16
Logic 0: 2 V max.
Logic 1: 5 V min. (30 V max.)
Interrupt Capable Ch. 2
2500 VDC
Isolation Protection
Opto-Isolator Response 25 µs
Input Resistance 2.8 KΩ
32-ch low-profile isolated digital I/O card
DB 44-pin cable, 1 m
DB-44 Wiring Terminal for DIN-rail mounting
Pin Assignments
AWS
CompactPCI
Signal Conditioning
Channels
16
Output Type
Sink (NPN)
2500 VDC
Isolation Protection
Output Voltage 5-40 VDC
Sink Current
200 mA max./channel
Opto-isolator Response 25 µs
USB I/O
Motion Control I/O
General
Bus Type
I/O Connectors
Dimensions
Power Consumption
Universal PCI V2.2
DB-44 female
119.91 x 64.41 mm (Low profile MD1)
Typical: 5 V @ 250 mA, 12 V @ 35 mA
Max: 5 V @ 400 mA, 12 V @ 60 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature -25 ~ 85° C (-4 ~ 185° F)
 Storing Humidity
5 ~ 95% RH, non-condensing




FPM
Plug-in I/O
Isolated Digital Output






IPPC
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-55
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1750
32-ch Isolated Digital I/O
and Counter Card
Features
 16 isolated DI and 16 isolated DO channels
 High voltage isolation on all isolated channels (2,500 VDC)
 High sink current on isolated output channels (200 mA/channel)
 Supports dry contact or 5 ~ 50 VDC isolated inputs
 Interrupt handling
 Timer/counter interrupt capability
Introduction
PCI-1750 offers 16 isolated digital input channels, 16 isolated digital output channels, and one isolated counter/timer for the PCI bus. With isolation protection of 2,500 VDC, and
dry contact support, PCI-1750 is ideal for industrial applications where high-voltage protection is required. Each I/O channel of the PCI-1750 corresponds to a bit in a PC I/O port.
This makes PCI-1750 very easy to program. This card also offers a counter or timer interrupt and two digital input interrupt lines to a PC. So you can then easily do configurations
by software.
Specifications
Isolated Digital Input
 Channels
 Input Voltage
16
Logic 0: 2 V max.
Logic 1: 5 V min. (50 VDC max.) or dry contact
 Interrupt Capable Ch. 2
 Isolation Protection
2,500 VDC
 Opto-Isolator Response 100 μs
Isolated Digital Output






Channels
16
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
200 mA max. per channel
Opto-Isolator Response 100 μs
 Storing Temperature
 Storing Humidity
-20 ~ 80° C (-4 ~ 176° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information





PCI-1750
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
32-ch isolated digital I/O and counter card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
37-pin D-type cable wiring terminal for DIN-rail
mounting
Pin Assignments
Counter/Timer
 Channels
 Resolution
1
1 x 32-bit timer
1 x 16-bit isolated counter
 Compatibility
5 V/TTL
 Max. Input Frequency 1 MHz
 Isolation Protection
2,500 VDC
General
 Bus Type
 I/O Connectors
PCI V2.2
1 x 37-pin D-type female connector
1 x 2-pin terminal block for extended ground
 Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
 Power Consumption
Typical: 5 V @ 850 mA
Max: 5 V @ 1.0 A
 Operating Temperature 0 ~ 70° C (32 ~ 158° F)
10-56
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1752U/1752USO
PCI-1754
PCI-1756
64-ch Isolated Digital Output Card
64-ch Isolated Digital Input Card
64-ch Isolated Digital I/O Card
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
PCI-1752
PCI-1754
PCI-1756
Ethernet I/O
Features










Features
64 isolated digital output channels
High-voltage isolation on output channels (2500 VDC)
2000 VDC ESD protection
Wide output range (5 ~ 40 VDC)
High-sink current on isolated output channels
(200 mA max./channel)
Output status read-back
Keeps digital output values when hot system reset
Channel-freeze function
High-density 100-pin SCSI connector
Support sink (1752U) & Source (1752USO) DO type
Specifications







Specifications
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-isolator Response
 Channels
 Input Voltage
64 (16-ch/group)
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
25 µs
General




Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
 Operating Temperature
 Storing Temperature
 Storing Humidity
Universal PCI V2.2
1 x 100-pin SCSI-II female
175x100mm (6.9" x 3.9")
Typical: +5 V @ 230 mA
Max.: +5 V @ 500 mA
0 ~ 60° C (32 ~ 140° F)
(IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95% RH, (IEC 68-2-3)
non-condensing
Ordering Information
 PCI-1752U
 PCI-1752USO  PCI-10250-1
 ADAM-3951
PCI-1752U 64-ch isolated
PCI card (Sink type)
64-ch isolated PCI card
(Source type)
1w-pin to two 50-pin SCSI
Casle, lm
Wiring terminal module
with LED-indicators for
DIN-rail Mounting
 Either +/- voltage input for DI by group
 Output status read-back for output channels
 Keeps digital output values after hot system reset
TPC
Specifications
IPPC
Isolated Digital Input
 Channels
 Input Voltage
Isolated Digital Input
Isolated Digital Output






Features
64 isolated digital input channels
Either +/- voltage input for DI by group
High-voltage isolation on input channels (2500 VDC)
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
Interrupt handling capability
High-density 100-pin SCSI connector
 Input Current (Typical)





Interrupt Capable Ch.
Isolation Protection
Overvoltage Protection
ESD
Opto-Isolator Response 64 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min.
(50 V max.)
10 VDC @ 1.7 mA, 12 VDC @
2.1 mA
24 VDC @ 4.4 mA, 48 VDC
@ 9.0 mA
50 VDC @ 9.4 mA
4
2,500 VDC
70 VDC
2,000 VDC
25 µs
General




Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
 Operating Temperature
 Storing Temperature
 Storing Humidity
PCI V2.2
100-pin SCSI-II female
175 x 100mm (6.9" x 3.9")
Typical: +5 V @ 340 mA
Max.: +5 V @ 450 mA
0 ~ 60° C (32 ~ 140° F)
(IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95% RH (IEC 68-2-3)
non-condensing
Ordering Information
 PCI-1754
 PCI-10250-1
 ADAM-3951
64-ch isolated digital input
card
1w-pin to two 50-pin SCSI
Casle, lm
Wiring terminal module
with LED-indicators for
DIN-rail Mounting






Interrupt Capable Ch.
Isolation Protection
Overvoltage Protection
ESD
Opto-Isolator Response
Input Current
32 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min.
(50 V max.)
2 (IDI0, IDI16)
2,500 VDC
70 VDC
2,000 VDC
25 µs
10 VDC @ 1.7 mA, 12 VDC @
2.1 mA
24 VDC @ 4.4 mA, 48 VDC
@ 9.0 mA
50 VDC @ 9.4 mA
FPM
32 (16-ch/group)
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
25 µs
Signal Conditioning
PCI V2.2
1 x 100-pin SCSI-II female
175x100mm (6.9" x 3.9")
Typical: +5 V @ 285 mA
Max.: +5 V @ 475 mA
0 ~ 60° C (32 ~ 140° F)
(IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95 % (IEC 68-2-3)
non-condensing
Motion Control I/O
Isolated Digital Output






Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-isolator Response
General




Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
 Operating Temperature
 Storing Temperature
 Storing Humidity
Ordering Information
 PCI-1756
 PCI-10250-1
 ADAM-3951
Online Download www.advantech.com/products
AWS
Plug-in I/O
CompactPCI
USB I/O
Ethernet Switch
EDG
ICOM
64-ch Isolated Digital I/O
Card
1w-pin to two 50-pin SCSI
Casle, lm
Wiring terminal module
with LED-indicators for
DIN-rail Mounting
10-57
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
128-ch Isolated Digital Input Card
128-ch Isolated Digital Output Card
128-ch Isolated Digital I/O Card
Features
PCI-1758UDO and PCI-1758UDIO
 128 isolated digital output channels (64 for PCI-1758UDIO)
 High-voltage isolation on output channels (2,500 VDC)
 Wide output range (5 ~ 40 VDC)
 High-sink current for isolated output channels (90 mA max./Channel)
 Current protection for each port
 BoardID™ switch
 Output status read-back
 Digital output value retained after hot system reset
 Programmable Power-Up States
 Watchdog timer
PCI-1758UDI
PCI-1758UDIO
PCI-1758UDO
Specifications
Feature Details
Isolated Digital Input
Interrupt Function (PCI-1758UDI/PCI-1758UDIO)
 Channels
PCI-1758UDI and PCI-UDIO provide an interrupt function for every digital input channel.
You can disable/enable the interrupt functions, and select trigger type by setting the Rising
Edge Interrupt Registers or Falling Edge Interrupt Registers of the card. When the interrupt
request signals occur, software will service these interrupt requests by ISR. The multiple
interrupt sources provide the card with more flexibility.





PCI-1758UDI: 128
PCI-1758UDIO: 64
Input Voltage
Logic 0: 2.5 V max.
Logic 1: 5 V min. (25 V max.)
Interrupt Capable Ch. PCI-1758UDI: 128
PCI-1758UDIO: 64
Isolation Protection
2,500 VDC
Opto-Isolator Response 20 µs
Input Resistance 3 kΩ
Digital Filter Function (PCI-1758UDI/PCI-1758UDIO)
The digital filter function is used to eliminate glitches on input data and reduce the
number of changes to examine and process. The filter blocks pulses that are shorter than
the specified timing interval and passes pulses that are twice as long as the specified
interval. Intermediate-length pulses that are longer than half of the interval, but less than
the interval, may or may not pass the filter depending on your settings.
Isolated Digital Output
 Channels





PCI-1758UDO: 128
PCI-1758UDIO: 64
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
90 mA max./channel
Opto-isolator Response 20 µs
Pin Assignments
CNB
General




Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Typical
Universal PCI V2.2
1 x MINI-SCSI HDRA-E100 Female
175 x 100 mm (6.9" x 3.9")
PCI-1758UDI
PCI-1758UDO
+5 V @ 0.3 A
+5 V @ 1.1 A
PCI-1758UDIO
+5 V @ 1.2 A
Max.
+5 V @ 0.6 A
+5 V @ 2.2 A
+5 V @ 1.8 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95 % (IEC 68-2-3) non-condensing
Ordering Information





10-58
PCI-1758UDI and PCI-1758UDIO
 128 isolated digital input channels (64 for PCI-1758UDIO)
 Wide input range (5 ~ 25 VDC)
 High ESD protection (2,000 VDC)
 Digital Filter function
 BoardID™ switch
 Interrupt handling capability for each channel
PCI-1758UDI PCI-1758UDO
PCI-1758UDIO
PCL-101100S-1
ADAM-39100
128-ch Isolated Digital Input Card
128-ch Isolated Digital Output Card
128-ch Isolated Digital Input/Output Card
100-pin SCSI Cable, 1 m
100-pin SCSI wiring terminal, DIN-rail mounting
Plug-in I/O Cards
PEF_COMM
PEF_COMM
PF_IDI07
PF_IDI06
PF_IDI05
PF_IDI04
PF_IDI03
PF_IDI02
PF_IDI01
PF_IDI00
PE_IDI07
PE_IDI06
PE_IDI05
PE_IDI04
PE_IDI03
PE_IDI02
PE_IDI01
PE_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
PCD_COMM
PCD_COMM
PD_IDI07
PD_IDI06
PD_IDI05
PD_IDI04
PD_IDI03
PD_IDI02
PD_IDI01
PD_IDI00
PC_IDI07
PC_IDI06
PC_IDI05
PC_IDI04
PC_IDI03
PC_IDI02
PC_IDI01
PC_IDI00
NC
NC
NC
NC
NC
NC
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CNA
PAB_COMM
PAB_COMM
PB_IDI07
PB_IDI06
PB_IDI05
PB_IDI04
PB_IDI03
PB_IDI02
PB_IDI01
PB_IDI00
PA_IDI07
PA_IDI06
PA_IDI05
PA_IDI04
PA_IDI03
PA_IDI02
PA_IDI01
PA_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
P89_COMM
P89_COMM
P9_IDI07
P9_IDI06
P9_IDI05
P9_IDI04
P9_IDI03
P9_IDI02
P9_IDI01
P9_IDI00
P8_IDI07
P8_IDI06
P8_IDI05
P8_IDI04
P8_IDI03
P8_IDI02
P8_IDI01
P8_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
P0_IDI00
P0_IDI01
P0_IDI02
P0_IDI03
P0_IDI04
P0_IDI05
P0_IDI06
P0_IDI07
P1_IDI00
P1_IDI01
P1_IDI02
P1_IDI03
P1_IDI04
P1_IDI05
P1_IDI06
P1_IDI07
P01_COMM
P01_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P2_IDI00
P2_IDI01
P2_IDI02
P2_IDI03
P2_IDI04
P2_IDI05
P2_IDI06
P2_IDI07
P3_IDI00
P3_IDI01
P3_IDI02
P3_IDI03
P3_IDI04
P3_IDI05
P3_IDI06
P3_IDI07
P23_COMM
P23_COMM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
NC
NC
NC
NC
NC
NC
P4_IDI00
P4_IDI01
P4_IDI02
P4_IDI03
P4_IDI04
P4_IDI05
P4_IDI06
P4_IDI07
P5_IDI00
P5_IDI01
P5_IDI02
P5_IDI03
P5_IDI04
P5_IDI05
P5_IDI06
P5_IDI07
P45_COMM
P45_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P6_IDI00
P6_IDI01
P6_IDI02
P6_IDI03
P6_IDI04
P6_IDI05
P6_IDI06
P6_IDI07
P7_IDI00
P7_IDI01
P7_IDI02
P7_IDI03
P7_IDI04
P7_IDI05
P7_IDI06
P7_IDI07
P67_COMM
P67_COMM
I/O Connector Pin Assignment for PCI-1758UDI
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1760U
8-ch Relay Actuator and Isolated DI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 Universal PCI card, for 3.3 V and 5 V PCI slot
 8 opto-isolated digital input channels
 8 relay actuator output channels
 2 opto-isolated PWM outputs
 LED indicators to show activated relays
 Jumper selectable dry contact/wet contact input signals
 Up event counters for DI
 Programmable digital filter function for DI
 Pattern match interrupt function for DI
 "Change of State" interrupt function for DI
 Universal PCI and BoardID switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1760U relay actuator and isolated digital input card is a PC add-on card for the PCI bus. It meets the PCI standard Rev. 2.2 (Universal PCI expansion card), and works with both
3.3 V and 5 V PCI slots. It provides 8 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can
be used as a on/off control devices or small power switches, and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Isolated Digital Input
General
 Channels
 Input Voltage




Channels
Resolution
Compatibility
Max. Input Frequency
Isolation Protection
PWM Channels
 Digital Noise Filter
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI-1760U: Universal PCI V2.2
1 x 37-pin D-type connector, female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 450 mA
Max: +5 V @ 850 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68 - 2 - 1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
8 (Sink)
Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable Ch. 8 (IDI0 ~ IDI7)
Isolation Protection
2,500 VDC
Opto-Isolator Response 25 µs
Input Resistance
1 kΩ 1/4 W
Counter/Timer






8
16 bits
5 V/TTL
500 Hz
2,500 VDC
2
Minimum effective high input period ≥ [(2 ~ 65535) x
5 ms] + 5 ms
Minimum effective low input period ≥ [(2 ~ 65535) x
5 ms] + 5 ms
Ordering Information





PCI-1760U
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
8-ch Relay Actuator and Isolated D/I Card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
DB37 wiring terminal for DIN-rail mounting
Relay Output






Channels
Relay Type
Contact Rating
Relay on Time Relay off Time
Life Span
 Resistance
FPM
AWS
Specifications




IPPC
8
2 x Form C, and 6 x Form A
120 VDC @ 0.5 A, or 30 VDC @ 1 A
5 ms max.
5 ms max.
200,000 operations @ 0.5 A 120 VAC
500,000 operations @ 1.0 A 30 VDC
Contact: < 100 mΩ
Insulation: 50 MΩ
Plug-in I/O
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-59
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1761
8-ch Relay Actuator/Isolated DI PCI Card
Features
 8 relay output channels and 8 isolated digital input channels
 LED indicators to show activated relays
 4 Form C and 4 Form A type relay output channels
 Male DB37 matching connector included
 Output status read-back
 Retained relay output values when hot system reset
 High-voltage isolation on input channels (3,750 VDC)
 High ESD protection (2,000 VDC)
 High over-voltage protection (70 VDC)
 Wide input range (10 ~ 50 VDC)
 Interrupt handling capability
 BoardID™ switch
Introduction
The PCI-1761 relay actuator and isolated D/I card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 3,750 VDC for collecting
digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with one red LED
to show its on/off status. The PCI-1761’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
The PCI-1761 digital input channels feature a rugged isolation protection for industrial, lab and machinery automation applications. It durably withstands voltage up to 3,750 VDC,
protecting your host system from any incidental harms. If connected to an external input source with surge-protection, the PCI-1761 can offer up to a maximum of 2,000 VDC ESD
(Electrostatic Discharge) protection. Even with an input voltage rising up to 70 VDC, the PCI-1761 can still manage to work properly, albeit for only a short period of time.
When the system has undergone a hot reset (i.e. without turning off the system power), the PCI-1761 can either retain output values of each channel, or return to its default configuration
as open status, depending on its onboard jumper setting. This function protects the system from unwanted operations during unexpected system resets.
Specifications
Isolated Digital Input
General
 Channels
 Input Voltage










8
Logic 0: 3 V max.
Logic 1: 5V min. (50V max.).
Interrupt Capable Ch. 8
Isolation Protection
3,750 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 µs
Input Resistance 5600 Ω
Input Current
1.6 mA @ 10 VDC, 8.9 mA @ 50 VDC
Relay Output







10-60
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
Contact:
Insulation:
8
SPDT (4 x Form C, and 4 x Form A)
250 VAC @ 3 A, or 24 VDC @ 3 A
15 ms max.
5 ms max.
2 x 107
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 37-pin D-type
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 220 mA
Max: +5 V @ 750 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information






PCI-1761
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
8-ch Relay Actuator/Isolated DI PCI Card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
DB37 Wiring Terminal for Din-rail Mounting
Universal screw terminal board
50 MΩ
1 GΩ min.
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1762
16-ch Isolated DI/Relay Output Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 16 relay output channels and 16 isolated digital input channels
 LED indicators to show activated relays
 Jumper selectable Form A/Form B-type relay output channel
 Output status read-back
 Retain relay output values when hot system reset
 High-voltage isolation on input channels (2,500 VDC)
 High ESD protection (2,000 VDC)
 High over-voltage protection (70 VDC)
 Wide input range (10 ~ 50 VDC)
 Interrupt handling capability
 High-density DB-62 connector
 BoardID™ switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
The PCI-1762 relay actuator and isolated D/I card is a PC add-on card for the PCI bus. It provides 16 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting
digital inputs in noisy environments, 16 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with one red LED
to show its on/off status. The PCI-1762’s sixteen optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
Specifications
Ordering Information
Isolated Digital Input
 Channels
 Input Voltage





16
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 µs
Input Resistance
4.7 KΩ





PCI-1762
PCL-10162-1
PCL-10162-3
PCL-10162-5
ADAM-3962
16-ch Isolated DI/Relay Output Card
PCL-10162-1 DB-62 cable assembly, 1 m
PCL-10162-3 DB-62 cable assembly, 3 m
PCL-10162-5 DB-62 cable assembly, 5 m
DB62 Wiring Terminal for Din-rail Mounting
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
 Resistance
AWS
Plug-in I/O
Signal Conditioning
16
SPDT (Form A or Form B, jumper selectable)
0.5 A @ 125 VAC or 1 A @ 30 VDC
6 ms max.
4 ms max.
2 x 105 ops. min. (0.5 A @ 125 VAC),
5 x 105 ops. min. (1 A @ 30 VDC) Contact: 50 MW
Insulation: 1,000 MW min. (at 500 VDC)
USB I/O
Motion Control I/O
Ethernet Switch
General
EDG
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x DB62 D-type female
175 x 100 mm (69" x 3.9")
Typical: +5V @ 250 mA
Max: +5V @ 620 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1,2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 - 95 % non-condensing (IEC 68-2-3)




FPM
CompactPCI
Relay Output






IPPC
ICOM
Online Download www.advantech.com/products
10-61
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1763UP
Low-profile 8-ch Relay/Isolated DI Card
Features













8 relay output channels and 8 isolated digital input channels
LED indicators to show activated relays
8 Form C type relay output channels
Output status read-back
Retained relay output values when hot system reset
High-voltage isolation on input channels (2,500 VDC)
High ESD protection (2,000 VDC)
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
Interrupt handling capability
Support Universal PCI Bus
Low Profile PCI card
BoardID™ switch
Introduction
PCI-1763UP relay actuator and isolated digital input card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 2500 VDC for
collecting digital inputs in noisy environments, and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with
one red LED to show its on/off status. PCI-1763UP’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The low
profile PCI form factor and universal PCI connector (V2.2 compliant), meet requirements for size and reduced power consumption.
Specifications
Ordering Information
Isolated Digital Input
 Channels
 Input Voltage 





8
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Input Current 3.16 mA @ 10 VDC
17.3 mA @ 50 VDC
Interrupt Capable Ch. 8
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
Opto-isolator Response 25 µs
Input Resistance 2.8 KΩ
Relay Output







Channels Relay Type Contact Rating
Relay on Time Relay off Time Life Span
Resistance 8
DPDT, Form C
240 VAC @ 0.25 A, or 30 VDC @ 1 A
5 ms max.
4 ms max.
1 x 10^7 @ 6 V/100 mA
Contact: < 50 mΩ
Insulation: 1 GΩ min. (at 500 VDC)
General
 I/O Connector Type
 Dimensions  Power Consumption
DB44 female
119.91 x 64.41 mm (Low-Profile MD1)
+5V @ 107.5 mA (typical)
+5V @ 301.3 mA (max.)
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1,2)
 Storing Temperature -20 ~ 70° C (-4 ~158° F)
 Storing Humidity
5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)
10-62
Plug-in I/O Cards
 PCI-1763UP  PCL-10144-1
 ADAM-3944
Low-profile 8-ch Relay/Isolated DI Card
DB 44-pin cable, 1 m
DB-44 Wiring Terminal for DIN-rail mounting
Pin Assignments
NO0
COM0
NO1
COM1
NO2
COM2
NO3
COM3
NO4
COM4
NO5
COM5
NO6
COM6
NO7
COM7
DI0H
DI1L
DI2L
DI2H
DI3H
DI4L
DI5L
DI5H
DI6H
DI7L
30
15
29
14
28
13
27
12
26
11
25
10
24
9
23
8
22
7
21
6
20
5
19
4
18
3
17
2
16
1
CN1
44
NC0
43
NC1
42
NC2
41
NC3
40
NC4
39
NC5
38
NC6
37
NC7
36
DI0L
35
DI1H
34
DI3L
33
DI4H
32
DI6L
31
DI7H
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-725
8-ch Relay Actuator/Isolated DI ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 8 relay output channels and 8 isolated digital input channels
 LED indicators to show activated relays
 4 Form C and 4 Form A type relay output channels
 Male DB37 matching connector included
 Output status read-back
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
The PCI-1761 relay actuator and isolated D/I card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 3,750 VDC for collecting
digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with one red LED
to show its on/off status. The PCI-1761’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
The PCI-1761 digital input channels feature a rugged isolation protection for industrial, lab and machinery automation applications. It durably withstands voltage up to 3,750 VDC,
protecting your host system from any incidental harms. If connected to an external input source with surge-protection, the PCI-1761 can offer up to a maximum of 2,000 VDC ESD
(Electrostatic Discharge) protection. Even with an input voltage rising up to 70 VDC, the PCI-1761 can still manage to work properly, albeit for only a short period of time.
When the system has undergone a hot reset (i.e. without turning off the system power), the PCI-1761 can either retain output values of each channel, or return to its default configuration
as open status, depending on its onboard jumper setting. This function protects the system from unwanted operations during unexpected system resets.
IPPC
FPM
AWS
Plug-in I/O
Specifications
Isolated Digital Input
General
 Channels
 Input Voltage










8
Logic 0: 3 V max.
Logic 1: 5V min. (30V max.).
Interrupt Capable Ch. 8
Isolation Protection
1500 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 µs
Input Resistance 560 Ω
Input Current
42 mA @ 24 V
Relay Output







Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
Contact:
Insulation:
8
SPDT (4 x Form C, and 4 x Form A)
120 VAC @ 0.5 A, or 30 VDC @ 1 A
8 ms max
8 ms max
1 x 107
CompactPCI
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
1 x 37-pin D-type
147 x 100 mm (5.75" x 3.9")
+5 V @ < 0.2 A; +12 V @ 33 mA for each relay
< 0.27 A if all eight relays are energized
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information






PCL-725
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
8-ch Relay Actuator/Isolated DI ISA Card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
DB37 Wiring Terminal for Din-rail Mounting
Universal screw terminal board
50 MΩ
100 MΩ min.
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-63
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-735
12-ch Relay Actuator Card
Features
 12 relay outputs
 LED relay status indicators
 Male DB37 matching connector included
 Relay status readback function
Introduction
Ideal for applications such as On/Off control or signal switching , the PCL-735 12-channel relay actuator provides 12 SPDT relays on a half-size card.
The On/Off status of each relay is easy to monitor. A red LED next to each relay shows its On/Off status, and the software can read each relay’s status. An onboard DB-37 connector
provides access to all output channels.
Specifications
Ordering Information
Relay Output






Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
 Resistance
12
SPDT, Form C
2 A @ 30 VDC, 1 A @ 125 VAC
5 ms. typical
5 ms. typical
> 5 x 105 operations @ 30 VDC and 2 A
> 2 x 106 operations @ 30 VDC and 1 A
Contact: 50 MΩ
Insulation: 1 GΩ @ 500 VDC min.






PCL-735
PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-880
ADAM-3937
12-ch Relay Actuator Card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
Screw terminal board
DB37 wiring terminal for DIN-rail mounting
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
1 x 37-pin D-type female
155 x 100 mm (6.1" x 3.9")
Typical: +5 V @ 280 mA
Max: +12 V @ 200 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)




10-64
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1780U
8-ch Counter/Timer Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 8 independent 16-bit counters
 8 programmable clock source
 8 digital TTL outputs and 8 digital TTL inputs
 Up to 20 MHz input frequency
 Multiple counter clock source selectable
 Counter output programmable
 Counter gate function
 Flexible interrupt source select
 BoardID™ switch
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1780 is a general purpose multi-channel counter/timer card for the PCI bus. It targets the AM9513 to implement the counter/timer function by CPLD. It provides eight 16-bit
counter channels, 8 digital outputs and 8 digital inputs. Its powerful counter functions cater to a broad range of industrial and laboratory applications.
IPPC
The card features 12 programmable counter modes, to provide one shot output, PWM output, periodic interrupt output, time-delay output, and to measure the frequency and the FPM
pulse width. The PCL-10168 shielded cable works well with PCI-1780 to reduce noise. Its wires are all twisted pairs, and the input signals and output signals are separately shielded,
providing minimal cross talk between signals and the best protection against EMI/EMC problems.
For easier configuration, PCI-1780 supports Plug & Play, and have also been equipped with an Advantech BoardID™ DIP switch that helps define each card’s unique identity when
AWS
multiple identical PCI cards have been installed in the same computer. The BoardID switch is very useful when you build your system with multiple identical PCI cards. With the
correct BoardID switch settings, you can easily identify and access each card during hardware configuration and software programming.
Plug-in I/O
Specifications
Digital Input
General
 Channels
 Compatibility
 Input Voltage




8
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. CH0
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
8
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 24 mA @ 0.8 V
Source: -15 mA @ 2.0 V
Counter/Timer
CompactPCI
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI-II female
175 x 100 mm (6.9" x 3.9")
Typical: +5 V @ 900 mA
Max.: +5 V @ 1.2 A
 Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
 Storing Temperature -20 ~ 70° C (-4 ~ 158° F)
 Storing Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information
 PCI-1780
 PCL-10168-1
 ADAM-3968
8-ch Counter/Timer Card
SCSI-68 shielded cable, 1 m
SCSI-68 wiring terminal, DIN-rail mount
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
8 (independent)
16 bits
5 V/TTL
20 MHz
Internal: 20 MHz
External clock: 20 MHz max.
 Counter Modes
12 (programmable)
 Interrupt Capable Ch. 8
 PWM Channels
8





Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-65
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCL-836
6-ch Counter/Timer Card
Features













Periodic interrupt generation
6 independent 16-bit counters
Digital filter for noise reduction
Binary or BCD counting
Programmable frequency output
Complex duty-cycle output
Single-shot output
16-bit TTL input and 16-bit TTL output ports
Selectable interrupt input channel
Up to 10 MHz input frequency
Pulsewidth and period measurement
Time-delay generation
F/V conversion and accumulation
Introduction
PCL-836 is a general purpose counter/timer and digital I/O card for PC/AT compatible computers. It provides six 16-bit counter channels. It also includes 16 digital outputs and 16
digital inputs. Two 8254 chips provide a variety of powerful counter/timer function modes to match your industrial and/or laboratory applications.
Unique Digital Filter
PCL-836 includes a unique digital filter to eliminate noise on the input signal. The frequency can be adjusted to provide more stable output readings.
Specifications
Ordering Information
Digital Input
 Channels
 Compatibility
 Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
 Channels
 Compatibility
 Output Voltage
 Output Capability
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 8 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V






PCL-836
PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-880
ADAM-3937
6-ch Counter/Timer Card
DB37 cable assembly, 1 m
DB37 cable assembly, 2 m
DB37 cable assembly, 3 m
Screw terminal board
DB-37 wiring terminal for DIN-rail mounting
Pin Assignments
Counter/Timer









Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
6
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External clock: 10 MHz
Counter Modes
6 programmable counter modes
Interrupt Capable Ch. IRQ 2, 4, 5, 7, 10, 11, 12, 15 (jumper selectable)
PWM Channels
3
Digital Noise Filter
1.6 ms to 52 ms (programmable)
General
 Power Consumption




10-66
+5 V @ 360 mA (typical)
+5 V @ 400 mA (max.)
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Operating Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Connector
One 37-pin D-type female connector for counter I/O
Two 20-pin male flat-cable connector for digital I/O
Dimensions (L x H)
185 x 100 mm (7.3" x 3.9")
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCM-3712
PCM-3718H/HG/HO
PCM-3724
2-ch Analog Output Module
12-bit Multifunction Module
with Programmable Gain
48-ch Digital I/O Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
BAS
UNO
RS-485 I/O
PCM-3712
PCM-3718H/HG/HO
PCM-3724
Features
Specifications
 Good selection of output ranges, including current
loop, unipolar and bipolar.
Analog Input
Specifications


Analog Output




Channels
Resolution
Output Rate
Output Range
2
12 bits
Static update
Unipolar (V)
0~5, 0~10
Bipolar (V)
± 2.5, ±5, ±10
Current Loop
4 ~ 20 mA
Internal
Reference
External Reference
 Slew Rate
±10 V
0.3 V/µs typ. (Voltage)
1.2 mA/µs (Current)
±5 mA
0.1 Ω max./0.02 Ω typ.
 Driving Capability
 Output Impedance
 Accuracy
Relative: ±1 LSB
Differential Non-Linearity ±1/2 LSB
General







Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
Storing Humidity
PC/104
1 x 10-pin box header
96 x 90 mm (3.8"x 3.5")
5 V @ 700 mA max.
0 ~ 60° C (32 ~ 140° F)
-20 ~ 85° C (-4~185° F)
0 ~ 90% RH,
noncondensing
Ordering Information
 PCM-3712
 ADAM-3909
2-ch AO Module
(18 cm flat cable 10-pin
to DB9-F included)
DB9 cable wiring for
DIN-rail mounting
 Channels




16 single-ended,
or 8 differential inputs
12 bits
Resolution
Max. Sampling Rate
100 kHZ* (DAM transfer)
*80 kHz on P4-based (or upper) system.
Input Impedance
10 MΩ
Software, pacer or ext.
Sampling Modes
Input Range
80 kHz on P4-based (or upper) system.
PCM-3718H and PCM-3718HO
 Bipolar
 Unipolar
±10, ±5, ±2.5, ±1.25, ±0.625
0 ~ 10, 0 ~ 5, 0 ~ 2.5, 0 ~ 1.25
PCM-3718HG
 Bipolar
±10, ±5, ±1, ±0.5, ±0.1, ±0.05,
±0.01, ±0.005
0 ~ 10, 0 ~ 1, 0 ~ 0.1, 0 ~ 0.01
 Unipolar
Analog Output (PCM-3718HO only)
 Channels
 Output Rate
 Output Range
1 (12 bits)
Static update
Internal Reference
Unipolar (V)
External Reference (V)




Slew Rate
Driving Capability
Output Impedance
Accuracy
0 ~ 5, 0 ~ 10
0 ~10, 0 ~ -10
10 V/µs
10 mA
0.1 Ω max.
Relative: ±1 LSB
Digital Input/Output
 Channels
 Input Voltage
16, 5V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Output Voltage
Logic 0: 0.33 V max. @ 6 mA (sink)
Logic 1: 3.84 V min. @ 6 mA (source)
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PC/104
2 x 20-pin box header
96 x 90 mm (3.8"x 3.5")
Typical: 5 V @ 180 mA
Max.: 5 V @ 400 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature
-40~85°C (-40 ~ 185° F)




Ordering Information
 PCM-3718H
 PCM-3718HG  PCM-3718HO
 ADAM-3920
 PCLD-780
 PCL-10120-1
 PCL-10120-2
 ADAM-3909
Ethernet I/O
Features
12-bit Multifunction Module
w/ Programmable Gain (cable
not included)
PCM-3718H w/high gain
PCM-3718H w/AO
20-pin flat cable wiring
terminal for DIN-Rail
Screw-terminal board for
20-pin flat cable
20-pin flat cable, 1 m
20-pin flat cable, 2 m
DB-9 Cable Wiring Terminal
 Output status read back
 Channels simulate 8255 PPI mode 0
 Interrupt triggering, rising/falling edge
Specifications
IPPC
Digital Input
 Channels
 Compatibility
 Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 1
Digital Output
 Channels
48 (shared with input)
 Compatibility
5 V/TTL
 Output Voltage
Logic 0: 0.5 V max. @ 24 mA (sink)
Logic 1: 2.0 V min. @ 15 mA (source)
General






Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
 Storing Humidity
 ADAM-3950
 PCLD-785B
 PCLD-782B
 PCL-10150-1.2
Online Download www.advantech.com/products
FPM
AWS
Plug-in I/O
CompactPCI
PC/104
Signal Conditioning
2 x 50-pin box header
96 x 90 mm (3.8"x 3.5")
5 V @ 90 mA
0 ~ 60° C (32 ~ 140° F) USB I/O
-40 ~ 85° C
(-40 ~185° F)
0 ~ 90% RH,
Motion Control I/O
non-condensing
Ordering Information
 PCM-3724
TPC
48-ch DI/O Module
(cable not included)
50-pin flat cable wiring
terminal for DIN-Rail
mounting
24-ch Relay Output
Board
24-ch Opto-isolated DI
Board
50-pin flat cable, 1.2 m
Ethernet Switch
EDG
ICOM
10-67
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCM-3725
PCM-3730
PCM-3780
16-ch Isolated Digital I/O Module
2-ch Counter/Timer with 24-ch TTL DI/O Module
PCM-3725
PCM-3730
Features
Features
 LED indicators to show activated relays
 High driving capacity and high-voltage isolation
Programmable counter
Specifications
Specifications
Isolated Digital Input
Digital Input
 2 independent 16-bit counters
 4 independent programmable clock sources
(10 M, 1 M, 100 k, 10 k)
 Channels
 Input Voltage
 Channels
 Interrupt Capable Ch.




8
Logic 0: 3 V
Logic 1: 10 V (50 V max.)
Isolation Protection
2500 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 µs
Input Resistance
4.7 KΩ
Relay Output







Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
8
SPDT (Form C)
30 VDC@ 1.5 A
4 ms
4 ms
100000 min @ 2 A/30 V
Contact: 100 MΩ
Insulation:
1 GΩ @ 500 VDC
General
 Bus Type
 I/O Connectors
 Dimensions (L x H)
 Power Consumption
Typical:
Max:  Operating Temperature
 Storing Temperature
 Storing Humidity
PC/104
1 x 20-pin head for IDI
1 x 50-pin head for relay
96 x 90 mm (3.8"x 3.5")
100 mA @ +5 V
280 mA @ +5 V
0 ~ 60° C (32 ~ 158° F)
-20~70° C (-4 ~ 158° F)
5 ~ 95% RH, non-cond.
Ordering Information
 PCM-3725




PCL-10120-1
PCL-10120-2
PCL-10150-1.2
ADAM-3920
 ADAM-3950
 PCLD-780
10-68
8-ch Isolated DI/Relay Output Module
8-ch Isolated DI/Relay
Output Module
(no cables inc.)
20-pin flat cable 1 m
20-pin flat cable 2 m
50-pin flat cable 1.2 m
20-pin flat cable wiring
terminal for DIN-rail
50-pin flat cable wiring
terminal for DIN-rail
Screw-Terminal Board for
20-pin Flat Cable
Plug-in I/O Cards
PCM-3780
Specifications
 12 programmable counter modes
16, 5 V/TTL
4
Digital Input
8
 Channels
 Compatibility
 Input Voltage
Isolated Digital Input
 Channels
 Input Voltage
Logic 0: Logic 1:  Isolation Protection
 Opto-Isolator Response
 Input Resistance
2 V max.
5 V min. (24 V max.)
2,500 VDC
0.1 ms
2 kΩ @ 0.5 W
Digital Output
 Channels
 Output Capability
Sink:
Source:
16, 5 V/TTL
8 mA @ 0.5 V max.
-0.4 mA @ 2.4 V min.
Isolated Digital Output






Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-Isolator Response
8
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
100 µs
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Typical:
Max:  Operating Temperature
 Storing Temperature
 Storing Humidity
PC/104
3 x 20-pin box header
96 x 90 mm (3.8"x 3.5")
330 mA @ +5 V
500 mA @ +5 V
0 ~ 60° C (32 ~ 158° F)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95% RH, non-cond.
Ordering Information
 PCM-3730
 PCL-10120-1
 PCL-10120-2
 ADAM-3920
 PCLD-780
 PCLD-785/885
Digital Output
 Channels
24 (shared with input)
 Compatibility
5 V/TTL
 Output Voltage
Logic 0: 0.5 V max. @ 24 mA (sink)
Logic 1: 2.4 V min. @ 15 mA (source)
Counter/Timer






Channels
Resolution
Compatibility
Max. Input Frequency
Counter Modes
Interrupt Capable Ch.
2
16 bits
5 V/TTL
20 MHz
12 (programmable)
2
General
General




 Interrupt Capable Ch.
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.4 V min.
24
16-ch Isolated DI/O Module
(cable included)
20-pin flat cable, 1 m
20-pin flat cable, 2 m
20-pin flat cable wiring
terminal for DIN-Rail mt.
Screw-terminal board for
20-pin flat cable
16-ch relay/power relay
output board
 Bus Type
 I/O Connectors
 Dimensions (L x H)
 Power Consumption
 Operating Temperature
 Storing Temperature
 Operating Humidity
PC/104
1 x 50-pin box header
1 x 20-pin box header
96 x 90 mm (3.8"x 3.5")
Typical: +5 V @ 300 mA
Max.: +5 V @ 0.8 A
0 ~ 60° C (32 ~ 158° F)
-20~70° C (-4 ~ 158° F)
5 ~ 85% RH non-cond.
Ordering Information
 PCM-3780
 PCL-10120-1
 PCL-10150-1.2
 ADAM-3920/50
2-ch Counter/Timer with
24-ch TTL DI/O
20-pin flat cable 1 m
50-pin flat cable 1.2 m
20/50-pin flat cable wiring
terminal for DIN-rail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1670
GPIB Interface PCI-bus Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PAC & Software
 Complete IEEE 488.2 compatibility
 Supports Windows® 95/98/NT/ME/2000/XP and DOS.
 Full driver, library, and example support, including Visual C++®, C++
Builder®, LabWindows/CVI, Visual Basic®, Delphi® and LabView® drivers.
 Provides NI-like driver & function libraries.
 PCI bus specification 2.1 compliant
 I/O address automatically assigned by PCI Plug & Play
 Provides powerful and easy-to-use configuration utility
BAS
UNO
RS-485 I/O
Ethernet I/O
TPC
Introduction
PCI-1670 is a high-performance PCI-bus card with a GPIB interface. The card is fully compatible with IEEE 488.1 and 488.2 standards with its PCI 2.1 bus specification. With two
driver control modes: controller mode and slave mode; PCI-1670 can perform basic the IEEE 488 talker, listener and controller functions required by IEEE 488.2. You can also connect
up to 15 GPIB instruments. Therefore, PCI-1670 is especially suitable for instrument measurements and control.
PCI-1670 is available for Windows 95/98/NT/ME/2000/XP and DOS, and it supports complete drivers and libraries. To make driver development easier, PCI-1670 comes with example
drivers programmed in: Visual C++, C++ Builder, Labwindows/CVI, Visual Basic, Delphi and LabVIEW.
Furthermore, PCI-1670 also offers powerful testing features and a configuration utility that allows users to easily access and control instruments.
PCI-1670 offers a comprehensive supplementary controller driver database and provides NI-like commands to help users develop applications. Users can use an interactive GPIB
window interface to control devices directly without any need of programming.
IPPC
FPM
AWS
Plug-in I/O
Specifications
Ordering Information
GPIB
Compatibility
GPIB Transfer Rate
OS Support
Library Support
IEEE 488, 488.1, 488.2
1 MB/s
Windows 95/98/NT/2000/XP, DOS
Visual C++, Borland C++ Builder, LabWindows/CVI,
Visual Basic, Delphi, LabVIEW
 Max. GPIB Connections 15




 PCI-1670
 PCL-1670L
 PCL-10488-2
GPIB Interface PCI-bus Card, IEEE-488 Cable, 2 M
GPIB Interface PCI-bus Card widthout cable
IEEE-488 Cable, 2 M
General






Bus Type
I/O Connectors
Dimensions (L x H)
Operating Temperature
Storing Temperature
Operating Humidity
PCI V2.1
1 x IEEE 488 standard 24-pin
131 x 106 mm (5.15" x 4.17")
0 ~ 55° C (32~131° F)
-20~70° C (-4 ~ 158° F)
10 ~ 90% RH, non-condensing
CompactPCI
Signal Conditioning
USB I/O
Motion Control I/O
Ethernet Switch
EDG
ICOM
Online Download www.advantech.com/products
10-69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PCI-1671UP
High-Performance IEEE-488.2
Interface for PCI
Features
 IEEE 488.2 Standard interface
 Complete Talker/Listener/Controller
 Industry standard 32-bit PCI bus
 Data transfer rates over 1.5 Megabytes/sec
 1024-word FIFO buffer
 High-Speed State Machine Bus Manager
 7 Interrupt lines, shared interrupt capability
 Transparent interrupt enabling/disabling
 Includes GPIB-Library software
 Low profile MD1 size
Introduction
The PCI-1671UP IEEE-488 interface converts any PCI bus personal computer into an instrumentation control and data acquisition system. Connect up to 14 instruments using
standard IEEE-488 cables such as the PCL-10488-2, 2 meter IEEE-488 interface cable.
Greater than 1.5 MB/s Transfer Rates
The PCI-1671UP transfers data over the GPIB at rates in excess of 1.5 million bytes per second using the maximum IEEE-488 specification cable length (2 meters times the # of
devices). A 1024-word FIFO buffer and the advanced REP-INSW ISR data transfer method provide the horsepower required to then transfer the data between the GPIB board and the
host computer. The high-speed state machine also provides byte-to-word packing and unpacking, and because words carry twice the information that bytes do, packed data requires
fewer bus cycles to transfer the same GPIB information.
IEEE-488.2 (GPIB) Compatibility
The PCI-1671UP adheres to ANSI/IEEE Standard 488-1978. Often referred to as the IEEE-488.2 bus, GPIB bus or HP-IB bus, the GPIB (General Purpose Interface Bus) is a standard
for instrumentation communication and control for instruments from manufacturers the world over. The GPIB provides handshaking and interface communications over an 8-bit data
bus employing 5 control and 3 handshake signals. Equipped with PCI-1671UP, a personal computer can:
Control GPIB instruments, gather data from GPIB test equipment, or become a data acquisition station in a GPIB system.
Software
The PCI-1671UP includes powerful GPIB-Library. The library greatly simplifies your programming effort. The PCI-1671UP is also supported by a wide variety of application software
packages including LabWindows/CVI®, LabVIEW® and many others.
Specifications
Ordering Information
 PCI-1671UP
GPIB
Compatibility
GPIB Transfer Rate
OS Support
Library Support
IEEE 488.1, 488.2
1.5 MB/s
Windows® 2000/XP
Visual C++®, Borland C++ Builder®, LabWindows/CVI,
Visual Basic®, Delphi®, LabVIEW
 Max. GPIB Connections 15




 PCL-10488-2  PCL-ADP488  PCI-1671S2
High-Performance IEEE-488.2 Interface for PCI-Bus
Computers (cable is not included)
IEEE-488 Cable, 2 m
GPIB Adapter (Necessasy while using PCI-1671UP in
low-profile chassis)
High-performance IEEE-488.2 Interface Card,
PCI-1671UP, with IEEE-488 cable 2 m
General







10-70
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
Operating Humidity
PCI-1671UP: Universal PCI V2.2
1 x IEEE 488 standard 24-pin
119.91 x 64.41mm (Low profile MD1)
Typical: 5 VDC @ 375 mA
0 ~ 60° C (32 ~ 158° F) @ 0-90% RH
-40 ~ 100° C (-40 ~ 212° F) @ 5-90% RH
0 ~ 90% RH, non-condensing
Plug-in I/O Cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Download PDF