Installation Instructions

Installation Instructions
Installation Instructions
1.
Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on the side
stand or ideally a service lift.
2.
Remove OEM muffler.
Yamaha
R3
Slip-On Exhaust System with S1R Exhaust Canister
Part # 005-4160405-S1
3.
Attach TBR muffler to TBR slip tube using springs
provided.
4.
Loosley install supplied join clamp to slip tube.
5.
Install TBR muffler assembly using OEM hardware and
supplied rubber lined muffler clamp.
6.
Tighten joint clamp and muffler strap.
7.
Double check your work to ensure everything is tight
and properly installed.
8.
Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the first time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you find a leak, a little high
temperature silicon sealant should fix it. After 50 to 100
miles, recheck all fasteners for tightness.
Parts List
Qty. Description
Part Number
1
1
1
2
1
1
1
8” Carbon Fiber
005-2C-S1
005-2C-S1-A
005-S45
031-P09175
015-10212
005-27-53MSH
S1R Muffler
S1R Muffler Clamp
S1R Muffler Clamp Liner
45mm Springs
Permatex Anti-Seize
TBR Sticker Kit
Barrel Clamp 53mm IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a center stand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Care & Cleaning / Warranty
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning
use a mild spray cleaner. Always apply cleaner or polish with a soft, clean
cloth.
Carbon Fiber Mufflers: Always make sure the fiberglass packing inside is in
good condition and not burned out, as exhaust heat inside an empty canister
will deteriorate the Carbon Fiber sleeve. TBR sells repack kits (TBR part #
005-10038) that include new rivets and repack material as well as a drill bit
(#30), making it easy to do yourself. Also, NEVER dyno test your bike with
carbon fiber mufflers installed - the intense heat and lack of cooling air can
quickly cause the CF material to burn. Two Brothers Racing does not provide a
warranty for burned carbon fiber.
Repack all road canisters every 3,000 miles. Part #005-10038
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement