Dimplex | XLS6N | Technical data | Dimplex XLS6N Technical data

2014-15
Denmans
Heating Guide 2014-15
ers
eat
H
age
r
Sto
rs
ate
e
bi H
m
Co
ters
ea
or H
t
vec
Co
rs
ato
di
r Ra
e
ign
Des
ting
ea
or H
o
erfl
Und
ting
ea
mH
o
hro
Bat
ils
l Ra
e
Tow
ters
ea
wH
nflo
Dow
e
t Fir
in
l Po
a
Foc
rs
iato
ad
dR
Fille
Oil
ters
ea
lar H
u
Tub
n
ctio
ote
t Pr
s
Fro
ers
eat
oor
td
Ou
H
atio
P
ting
ea
ral H
rols
nt
Co
nt
Ce
rs
a
ost
rm
The
e
Tim
ts &
www.denmans.co.uk
A Rexel Group Company
Contents
19
Focal Point Electric Fires
20
Freestanding Domestic Heating
New Classic Combi Heaters
21
Oil Filled Radiators
Fan Heaters
06
New Classic Mini Storage Heaters
New Classic Heating Specification
22
Overdoor, Screen & Plinth Heaters
Suspended Ceiling Heater
07
Dimplex Storage Heaters
08
Dimplex Storage Heaters
New Classic Panel Convector Heaters
23
Tubular Heaters and Guards
Frost Protection
24
Halogen / Infra-Red Heaters
09
Designa Panel Heaters
Dimplex Ultra Slim Panel Convector Heaters
25
Halogen Heater - Portable
Outdoor Patio Heaters
10
Elnur Designer Radiators
26
Central Heating Controls, Thermostats
& Timers
29
Netatmo Wi-fi Enabled Thermostat
30
Nest Learning Thermostat™
32
Branch List and Contacts
03
Elnur Electric Boiler
Quantum Energy System
04
New Classic Auto Storage Heaters
05
11MyHeat® Underfloor Heating
17
Bathroom Heating - Towel Rails
18
Bathroom Heating - Heat & Light Unit
Bathroom Heaters - Downflow Heaters
Introduction
Introduction
Welcome to Denmans Electrical Wholesaler’s heating guide - updated for 2014-15!
This heating brochure aims to illustrate and provide informative and technical guidance on a selection of our heating
range, with products that will provide you with the warmth and comfort needed over the cold winter months.
From domestic - whole house, bathroom and kitchen heating to commercial heating and general purpose heaters,
including portable fans and focal point fires, we also have a whole range of energy efficient appliances you can be
confident in. Alongside the increasing popularity of electric heating and emphasis on energy efficient usage, we have
an extensive range of underfloor heating systems that can be tailored to your individual requirements of a particular
application. Also available in branch is a variety of central heating controls and thermostats.
At Denmans, we recognise the importance of being able to respond quickly to changes in the market and to
keep you up-to-date with the latest news. It is also invaluable that our customers can contact us so we can work
together to improve our businesses by fulfilling orders efficiently, answer all your electrical requirements and use our
comprehensive supplier database to ensure we can source all the electrical supplies you might need. So why not call in
to your local branch today to discuss your electrical requirements?
Alternatively, visit our website www.denmans.co.uk for more information.
Online version available:
Denmans - the source for all your heating requirements.
www.denmans.co.uk
2
Electric Boiler
Elnur offers 2 types of electric central heating boilers. The CM range is compact central heating boilers offering
low maintenance & fully controllability. The CMX range offers all the advantages of the CM range but can also
supply continuous domestic hot water.
B
B
A
A
•Two models in each range available
with selectable outputs from 2 to 18kW.
CM15
•Digital display constantly shows
the temperature of the circulating
Central Heating water (CHW)
and Domestic Hot water (DHW).
CM18
•Hydrometer 0-4 bar.
•Auto air vent.
CMX15
CMX18
•Silent TRIAC power switches.
CM Range
C
Code
Wattage
A
B
C
Dry Weight
350mm
265mm 32 kg
32 kg
70 kg
CM15
2 - 15kW* 760mm
CM18
CMX15
CMX18
3 - 18kW* 760mm
350mm
265mm 2 - 15kW†
830mm535mm450mm 3 - 18kW†
830mm535mm450mm •2 Years manufacturers warranty.
CMX Range
C
* Central Heating Only.
†Central Heating and Domestic Hot Water.
70 kg
The Quantum Leap in Heating Technology!
Dimplex’s Quantum Energy System is a complete ‘smart’ space and water heating energy management system
offering low cost, low carbon electric heating and hot water.
One of the systems main elements is the Quantum ultra-efficient electric space heater a unique, fully electronic highly controllable ‘smart’ energy storage appliance.
•Ultra efficient heating system with low
running costs by utilising off-peak tarriffs
B
•Contemporary design, no deeper than
a double radiator
•Can match output to user lifestyle
•Wide range enables greater freedom
in specification
A
•State of the art user controls with
LCD display
•Electronic controller pre-loaded
•Simple to install - instructions for
both installer and user
FAST PAYBACK
C
CodeWattage A
B
Dimplex’s in-house testing indicates that the
C Weight
Q70
700W 700mm690mm180mm Q100
Q125
Q150
1000W 700mm820mm180mm 1250W 700mm1060mm180mm 1500W 700mm1060mm180mm
Quantum space heating system can
75 kg
110 kg
145 kg
180 kg
save up to 20% on running costs,
compared with conventional electric systems!
3
New Classic - Auto Storage Heaters
New Classic storage and panel heaters can provide heating solutions for every room in the house. Whether
it’s a whole house heating system or a single room one of the real benefits is that you can choose from a
comprehensive range to meet your exact requirements, at a price that is affordable.
Auto Storage Heaters
B
Storage heaters with automatic input charge control.
•Automatically adjusting input charge controller.
•Room temperature boost control.
•Frontal grille for efficient heat distribution.
•Suitable for domestic or commercial use.
A
•BEAB approved.
•Excellent value for money.
DETAILED SPECIFICATION
•Controls: Room temperature control. Room temperature boost.
Both controls concealed behind flap, top right hand corner.
•Storage core: High density bonded magnetite bricks.
•Element: 0.85 kW Incoloy sheathed.
•Insulation: Front: microtherm G. Rear: resin free needle fibre.
Top and ends: low resin mineral wool.
Base: calcium silicate slab.
•Thermal Cut Out: Bi-metal, manual reset.
•Input Charge Controller: Adjustable twin sensing hydraulic room
sensing thermostat and pre-set bi-metal core limit thermostat.
•Damper Control (Boost): Bi-metal/cam assembly,
giving user adjustable boost selection.
•Colour/Finish: Front, grille and side panels: Willow White.
•Cable Length: None fitted.
•Standard Warranty: 2 years.
•Approvals: CE, BEAB, IPX2.
C­
FOR THE LATEST
INFORMATION
PLEASE VISIT
www.denmans.co.uk
Code
Wattage
A
B
C
Weight
NC1700AUTO1700W 700mm 560mm 170mm
(see below)
NC2550AUTO2550W 700mm 788mm 170mm
NC3300AUTO 3400W 700mm 1016mm170mm
(see below)
Curtains
Shelf or Overhang
(see below)
250
min
Performance
NC1700AUTO
NC2550AUTO
NC3300AUTO­­
Voltage (~AC) Input rating 230-240
1.70 kW
12 kWh
2
77 kg
16.5 kg
230-240 2.55 kW 18 kWh
3
110 kg 21.5 kg 230-240
3.4 kW
24 kWh
4
145 kg
26.5 kg
Charge acceptance (7hr)
No. Elements (0.85kW) Weight (incl. bricks) Packed weight
Wall,
Curtains or
furniture
75 min
75
min
A
C
Furniture
or other
Obstruction
150
MIN
88
B
4
New Classic - Combi Heaters
This range provides the benefit and convenience of economy storage heating with the flexibility of “direct-acting”
top up heat. Increased controllability allows the user to turn on the convector and enjoy heat on demand.
Comfort conditions are automatically maintained with the convector element controlled by a thermostat. This
range has the benefit of allowing the storage heat and convector to operate separately or simultaneously. The
convector element can be used even when the storage heater is charging. The convector switch incorporates a
neon indicator to avoid inadvertent use.
Combi Heaters
B
Storage heaters with automatic input charge control.
•Automatically adjusting input charge controller.
•Room temperature boost control.
•Frontal grille for efficient heat distribution.
•Suitable for domestic or commercial use.
A
A
•BEAB approved.
•Excellent value for money.
•Requires independent supply to run the convector.
DETAILED SPECIFICATION
•Controls: Convector room temperature control located top
right side of front panel.
•Storage core: High density bonded magnetite bricks.
•Element: 0.85 kW Incoloy sheathed.
•Insulation: Front: microtherm G. Rear: low resin mineral wool.
Top and ends: low resin mineral wool.
Base: calcium silicate slab.
•Thermal Cut Out: Bi-metal, manual reset.
•Input Charge Controller: Hydraulic room temperature sensing thermostat.­­­
•Class: Class 1.
•Colour/Finish: Front, grille and side panels: Willow White.
•Cable Length: None fitted.
•Standard Warranty: 2 years.
•Approvals: CE, BEAB, IPX2.
C
Code
Wattage
A
B
C
Weight
NC255COMBI
2550W
700mm788mm204mm
(see below)
NC330COMBI
3400W700mm1016mm204mm
(see below)
Curtains
Shelf or Overhang
250
min
Performance
Voltage (~AC) Input rating Charge acceptance (7hr)
No. Elements (0.85kW) Weight (incl. bricks) Packed weight
Wall,
Curtains or
furniture
75 min
NC255COMBINC330COMBI 230-240 230-240
2.55 kW 3.4 kW
18 kWh
24 kWh
3
4
112 kg 147 kg
23.5 kg 28.5 kg
75
min
A
C
Furniture
or other
Obstruction
150
MIN
88
B
5
New Classic - Mini Storage Heater
Mini Storage Heater
B
Mini storage heater with preset manual input charge control.
•Designed for use in confined areas, for background
heating or to supplement an existing system.
•Ideal for use in bathrooms, cloakrooms & en-suites.
•BEAB approved.
•Frontal grille for efficient heat distribution.
•Suitable for domestic or commercial use.
A
•850 Watt.
•Excellent value for money.
DETAILED SPECIFICATION
•Controls: No user adjustable controls.
•Storage core: High density bonded magnetite bricks.
•Element: 0.85 kW Incoloy sheathed.
•Insulation: Front: microtherm G.: Rear: resin free needle fibre.
Top and ends: low resin mineral wool.
Base: calcium silicate slab.
•Thermal Cut Out: Bi-metal, manual reset.
•Input Charge Controller: Bi-metal thermostat, preset.
•Colour/Finish: Front, grille and side panels: Willow White.
•Cable Length: None fitted.
•Standard Warranty: 2 years.
•Approvals: CE, BEAB, IPX2.
C
Code
Wattage
NC850MANU850W
A
B
C
707mm332mm170mm
Weight
Storage Heat Retention Bricks. These are the Industry standard
bricks. Each element in a heater has 4 bricks surrounding it. They
are supplied in packs of two and weigh approx 7.5kg each.
41 kg*
* Including bricks
New Classic - Heating Specification
If you need to obtain an indication of the heating requirements for estimating please use the Selection Guide below. Heater
sizing for storage heaters and panels can be easily calculated. Knowing the floor area, the wall construction and the number
of outside walls, the heater loading in kilowatts is indicated in the appropriate table. These tables do not take into account
particularly old properties or those built very recently. If your property fits into one of these classifications, please contact your
local branch so that we can provide a more accurate assessment. (Note a ceiling height of 2.4m is assumed and a minimum
of 75mm of roof insulation.)
Floor
Area
m2
10
12
14
16
Bedrooms
Panel Heaters recommended. Heater loading in kW Temp 18ºC
Solid Walls
Number of outside walls
m2
12
16
20
24
28
32
Floor
Area
Living or Dining Room
Storage Heaters. Heater loading in kW Temp 18ºC
123
3.54.15.4
3.94.76.0
5.05.97.4
5.66.58.1
6.27.49.0
6.68.19.9
Cavity Walls
Number of outside walls
123
3.03.64.7
3.54.45.4
4.45.16.5
5.05.97.1
5.66.58.0
6.27.18.9
Insulated Cavity Walls
Number of outside walls
12 3
2.12.4 3.2
2.63.0 3.6
3.23.6 4.4
3.94.4 5.0
4.14.7 5.6
4.55.1 6.0
Floor
Area
Solid Walls
Number of outside walls
Cavity Walls
Number of outside walls
Insulated Cavity Walls
Number of outside walls
m2
8
12
16
20
24
1
0.8
0.9
1.2
1.4
1.5
1
0.8
0.9
1.0
1.2
1.2
1
0.8
0.8
0.9
1.0
1.0
2
1.3
1.8
2.1
2.2
2.3
3
1.7
2.3
2.7
3.1
3.4
2
1.0
1.4
1.7
2.0
2.1
3
1.4
2.1
2.2
2.6
2.9
2
0.9
1.4
1.6
1.8
1.9
For storage heaters multiply all loading by 1.5
Kitchen
Offices and general areas
Storage Heating. Heater loading in kW Temp 18ºC
Panel Heaters. Heater loading in kW Temp 21ºC
Solid Walls
Number of outside walls
Cavity Walls
Number of outside walls
Insulated Cavity Walls
Number of outside walls
1
1.6
1.9
2.1
2.4
1
1.4
1.7
2.0
2.1
For all kitchens with
cavity wall insulation
direct heating is fine,
choose from plinth
heaters or fan heaters
for all situations.
2
2.1
2.7
3.0
3.3
3
2.9
3.3
3.6
3.9
2
2.0
2.3
2.6
2.9
3
2.4
2.9
3.1
3.4
3
1.4
1.8
2.1
2.4
2.5
Floor Area
m2
15
20
25
30
40
50
6
Solid Walls
3.8
5.0
6.3
7.5
10.0
12.5
Cavity Walls
2.6
3.5
4.4
5.3
7.0
8.8
Insulated Cavity Walls
1.5
2.0
2.5
3.0
4.0
5.0
Storage Heaters
Storage heaters use off-peak electricity to store heat in special heat-retaining bricks, thereby keeping running
costs low. These then give out heat slowly and are designed to keep warm for the whole of the following day.
Easy to install, requiring no pipework or flues.
Slimline Storage Heaters
•Ultra slim design, offering performance,
economy and maintenance free reliability.
B
C
XL Range
XLS Range
•The XLS range is suitable for a wide range
of domestic and commercial applications.
•The automatic XLS range features automatic charge regulator,
which automatically adjusts the level of input charge to
compensate for changing weather conditions without the
need for user intervention.
A
Code
Wattage
A
B
C
XL12/XLS12
1700W 706mm565mm146mm
XL18/XLS18
2550W 706mm793mm146mm
XL24/XLS24
3400W 706mm1021mm146mm
•At the heart of this system is the patented Twin Sensor®, which
meets the requirements of Building Regulations Part L1, which
requires all electric storage heaters installed in new builds to be
fitted with automatic charge controls.
Weight
76 kg
109 kg
144 kg
•Running cost savings of up to 15% when compared to manual
static storage heaters. Compatible with all off peak tariffs.
•Easy to use controls, out of sight of young children. Secure wall
fixings for safety.
•Frontal grille for efficient heat distribution.
•Matches the PLX range of panel heaters.
•Drip proof construction (IPX2 rated).
The XL range features manually adjustable charge regulator to
control the amount of heat stored during the charge period.
Automatic Mini Storage Heater
B
XL6
•This mini storage heater is an extra
compact version of our popular XL storage heater
bringing the benefits of off peak heating to areas which
were traditionally too small for storage heaters such as
bathrooms, cloakrooms and ensuites.
C
•Ideal to top up existing heating in cold spots, improving
the overall comfort and efficiency of the system.
•Automatic input control to automatically regulate the input
charge according to changing weather conditions.
A
•Suitable for use in confined areas, for background heating,
or to supplement an existing system.
•Input loading of just 850W.
•Secure wall fixing for safety. Feet may be fitted under carpet or
on top of suitable floor covering. Simple assembly for flexible
positioning and quick installation.
•Drip proof construction (IPX2 rated).
•The XLS6N is designed specifically for use in wet areas such as
bathrooms and is Building Regulations Part L compliant.
Code
Wattage
A
B
C
XLS6N 850W 700mm332mm170mm
Weight
•Accessory towel rail (part no. STR6) and shelf (SHE6) available.
41 kg
7
Storage Heaters
B
Combination Storage and Convector Heater
C
Similar to XLS models but with built in convector to supplement
stored heating, or it can be used as the sole heating if heat is
required unexpectedly - for example in spring or autumn. By
providing two heaters in one compact case, the CXLS saves
space and its smooth curved styling complements PLX panel
heaters.
•Provides a continuous source of warmth,
primarily from cheap off peak electricity.
A
CXLS Range
•Conveniently positioned convector
controls on the front panel.
•Convector gives completely silent top-up heating and can
operate independently of storage heater.
•Lower convector loadings selectable on installation.
Code
Wattage
A
B
C
CXLS12
1700W706mm565mm193mm
CXLS18
CXLS24
2550W706mm793mm193mm
3400W706mm1021mm193mm
•Secure wall fixing for safety.
Weight
•CXLS range features automatic charge regulator, which automatically adjusts the level of input charge to compensate for changing weather conditions without user intervention.
77 kg*
111 kg*
146 kg*
•CXLS models are Building Regulations Part L compliant.
* Including bricks
•Requires independent supply to run the convector.
New Classic - Panel Convector Heaters
New Classic storage and panel heaters can provide heating solutions for every room in the house. Whether
it’s a whole house heating system or a single room one of the real benefits is that you can choose from a
comprehensive range to meet your exact requirements, at a price that is affordable.
Slim Line Wall Mounted Panel Convector Heaters
B
Available with and without 24 hour timer.
•Convected heat for rapid warm up.
•Five sizes available with heat outputs up to 3kW.
•Frost protection setting.
•Splash-proof, ideal for wet areas such as bathrooms.
A
•Suitable for domestic and commercial use.
•Excellent value for money.
•Colour matched to the New Classic storage heaters.
DETAILED SPECIFICATION
•Controls: Adjustable thermostat. 24 hour timer
(NC2PH Timer models only).
•Power Switch: Non timer models: Single pole ON/OFF switch.
Timer models: 24 hour timer which can be preset to 20min intervals and incorporates manual override switch to provide either constant heat or switch heater off. 1250W, 1500W and 2000­W models offer choice of half or full heat power settings.
•Element: Finned, metal sheathed mineral filled type.
•Thermostat: Gas filled type.
•Thermal Cut Out: Interrupt supply to reset type.
•Colour/Finish: Front, grille and side panels: Willow White.
•IP Rating: IPX4 (splashproof).
•Cable Length: 1 metre of flex fitted.
•Standard Warranty: 2 years.
•Approvals: CE, BEAB.
C
Performance
NC2PH750 NC2PH1250NC2PH1500NC2PH2000NC2PH3000
NC2PH750T NC2PH1250TNC2PH1500TNC2PH2000TNC2PH3000T
Loading kW 0.75 kW 1.25 kW
1.5 kW
2.0 kW
3.0 kW
Dimensions
Width (B) (mm) 620 690
690 860
860
Height (A) (mm) 430
430 430 430
430
Depth (C) (mm) 108 108 108 108
115
(X) (mm)287355355527527
Weight (kg) 6.2 6.6 6.6 8.0
10.0
8
Panel Heaters
Panel Heaters
C
Silent operation. Slim and compact, body only 69mm thick. IP24.
3 heat options. LED display boost timer.
B
• Over-heat safety protection. Child safety lock.
• Electronic thermostat for temperature control
• LED 24 hour timer
• Anti-frost function
• Three heat options; Economy, Normal and Express
• IP24 Rated
A
Code
Wattage
A
B
DEPH1500T 1500W 400mm 595mm
DEPH2000T 2000W 400mm 830mm
C
Weight
69mm
69mm
5.8 kg
7.7 kg
Ultra Slim Panel Convector Heaters
The PLX range is a cost effective way to extend an existing heating system when buildings are being refurbished
or new rooms added. It is a popular choice for specifiers, home owners and contractors who demand stylish,
space saving and efficient electric heating systems. Styled to complement the Dimplex storage heaters, PLX
panel heaters are often used to heat areas such as bedrooms, bathrooms, kitchens and other areas that only
require heating for short periods of the day.
Ultra Slim Panel
Convector Heaters
C
B
PLX Range
Within the range are 24 hour and 7 day timer models, and
models with no built-in controls for use with remote controllers.
•Suitable for domestic or commercial use.
•All models are splashproof (IPX4 rated) for use in bathrooms
and other wet areas.
•High accuracy adjustable thermostat/timer that responds to
very small changes in room temperature to reduce temperature drift.*
•Frost protection setting.**
•Front air outlet grille for efficient heat circulation.
•Lockable dust cover protects controls.
•Detachable hinged wall mounting frame for fast installation
and easy cleaning.
A
* PLX TI, PLX TX or PLX NC models fitted with appropriate
external thermostat/timer.
** Not applicable to PLX NC range.
Versions available
Wattage Thermostat
Only
500W
750W
1000W
1250W
1500W
2000W
3000W
•
•
•
•
•
•
•
24 Hour
Timer
7 Day
Timer
No Controls
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dimensions
Code
Wattage
(see below)500W
(see below)750W
(see below1000W
(see below)1250W
(see below)1500W
(see below)2000W
(see below)3000W
A (h)
C (d)
Weight
430mm450mm108mm
4.8 kg
430mm620mm108mm
6.2 kg
430mm620mm108mm
6.2 kg
430mm690mm108mm
6.6 kg
430mm690mm108mm
6.6 kg
430mm860mm108mm8.0 kg
430mm860mm143mm 10.0 kg
PLX Range of models include:
Thermostat only: PLX[wattage]. 24 Hour Timer: PLX[wattage]TI. 7 Day Timer: PLX[wattage]TX †. No Controls: PLX[wattage]NC ††
† available only in 2000W and 3000W versions †† excludes 3000W
9
B (w)
Designer Radiators
Stylish alumnium radiators and sixteen models makes the Elnur range of electric radiators a felxible choice.
Simple to install and easy to use these quality radiators provide the comfort of radiant and convected heat.
B
C
DIGITAL TIMER
Fully programmable digital
4 hour / 7 day timer controls with thermostat
offers total control on the level of comfort.
RFE Range
Dimensions
A
Code
Wattage
RF4E
0.5kW
RF6E
RF8E
RF10E
RF12E
RF14E
0.75kW
1kW
1.25kW
1.5kW
2kW
A (h)
B (w)
C (d)
Controls
580mm 415mm
125mm Digital
580mm 575mm
125mm Digital
580mm 735mm
125mm Digital
580mm 895mm
125mm Digital
580mm 1055mm 125mm Digital
580mm1215mm125mm
Digital
Timer
Timer
Timer
Timer
Timer
Timer
Non-Timer versions available
B
DIGITAL TIMER
C
Identical in performance to the RFE range
with added benefit of a reduced height.
Ideal where the height of wall space is
restricted by a window or a low wall
in a conservatory.
A
RFC Range
Dimensions
B
Code
Wattage
A (h)
B (w)
RF7E
0.75kW 430mm 655mm
RF9E
RF11E
RF14E
1.0kW
430mm 815mm
1.25kW 430mm 975mm
1.50kW 430mm 1215mm
MANUAL - DRY TECH
Simple to install and easy to use,
these quality radiators provide the comfort
of radiant and convected heat.
C (d)
125mm
125mm
125mm
125mm
Controls
Digital
Digital
Digital
Digital
Timer
Timer
Timer
Timer
RKS Range
Dimensions
A
Code
Wattage
RKS4Hi 0.5kW
RKS6Hi 0.75kW
RKS8Hi 1kW
RKS10Hi 1.25kW
RKS12Hi 1.5kW
RKS14Hi2kW
A (h)
B (w)
C (d)
Controls
580mm 415mm
100mmManual
580mm 575mm
100mmManual
580mm 735mm
100mmManual
580mm 895mm
100mmManual
580mm 1055mm 100mmManual
580mm1215mm100mm Manual
Digital versions available
C
10
Underfloor Heating - MyHeat
Electric Underfloor Heating for the Professional Installer.
MYHEAT®’s comprehensive range of underfloor heating products and services have been specifically developed
for the professional installer.
Easy-Fit Product Ranges: With two decades of manufacturing experience we have developed products
that are simple and easy to fit for a wide range of applications. From simple floor warming in a bathroom to a
complete household heating system, we can provide a heating solution that is efficient and economical for your
customer.
Installer Support: MYHEAT® provide a comprehensive pre and post sale support program for the professional
installer. Our technical support team offer a FREE design and costing service, enabling you to offer the very
best system value for your customer. We can provide free site visits to advise you on system design and
specification. Finally, once the system is installed we look after the end user by providing a customer support
helpline to advise on system usage and thermostat programming to ensure they maximise the benefits of their
new heating system.
Quality Assured: MYHEAT® products are manufactured in our UK & European based factories to the latest
European safety standards and are fully compliant with the 17th Edition Wiring Regulations.
Availability: The MYHEAT® comprehensive product range and value added service is exclusive to Denmans.
MYHEAT® Underfloor Heating Mats
MYHEAT® Electric Underfloor Heating is ideal for refurbishment
projects in existing dwellings or in new-build extension projects.
Either as direct floor heating or as floor storage heating. (See
Figure 1).
There is no need to remove existing ceramic floor tiles - you can
install the MYHEAT® Classic heating mats directly on top of the
existing tiles and then tile over them as normal. There is normally
no need to reduce door heights or raise skirting boards.
MYHEAT® Underfloor Heating is ideally suited to installation within
the adhesive layer, the method preferred by professional floor
tilers when laying ceramic tiles. MYHEAT® Electric Underfloor
Heating systems are clean, quiet in operation, 100% efficient at
the point of use and require absolutely no maintenance at all.
MYHEAT® Underfloor Heating is one of the most energy efficient
means of heat delivery in existence.
Figure 1
Direct floor heating
Floor storage heating
MYHEAT® Controls
The new Touch-Screen Thermostat
is designed to be the simplest to use
electric floor heating control available.
It comes packed with innovative features to optimise your
comfort and minimise running costs with the simplest touch
screen interface.
MH3500
MH3500
• Easy to use • Intuitive programming • Easy installation
• Energy monitor • Energy efficient
• Attractive styling (available in white, silver or black finish)
MH3131
The Manual Room Thermostat is
an electronic thermostat developed for
optimal regulation of under floor heating systems.
• Easy to use • 3 modes of operation • Polar White Finish
• Floor sensor cable
MH3232
The Programmable Room Thermostat
is a premium quality programmable
thermostat that is ultra compact and provides precise control of
the ambient temperature with a floor limit sensor.
• Compact design • 3 modes of operation • Polar white finish
• Intuitive programming • Floor sensor cable
MH3131
11
MH3232
Underfloor Heating - MyHeat
Installation For All Tile and Stone Floors
Product Codes for MYHEAT® Underfloor
Heating Mats
MYHEAT® Underfloor Heating Mats are a combination of a
heating cable attached to a fibreglass mesh scrim that makes
installation easy. The mat can simply be rolled out onto the floor
saving precious time.
150 W/m 2 Cable Mat
The mats have double-sided tape on the underside so they can
easily be fixed to any clean surface.
Features:
•Two heat outputs - 150W/m2 and 200W/m2
•Quick installation - simply roll out the mat and fix to floor
•Continuous metallic earth screen to ensure electrical safety
•Suitable for use in wet areas
•Low build height - minimal floor height build up
MYHEAT® - Technical Data:
•Operating Voltage: 230V, 50Hz
•Cable Diameter: 3.0 - 4.0mm
•Cold Tail Length: 3m
•Approvals: EN60335-2-96
Floor Construction:
•Suspended Floors - to prevent floor movement all wooden
floorboards must be covered with insulated tile backer board
or 18mm plywood.
•Concrete Floors - it is recommended to fit a layer of insulated
tile backer board to minimuse heat loss and ensure quicker
heat-up times.
Area to be
heated (m2)
Product
Code
Output
(W)
Width
(m)
Length
(m)
0.5m2
1.0m2
150MH0.5
75
0.5
1.0
150MH1.0
150
0.5
2.0
1.5m2
150MH1.5
225
0.5
3.0
2.0m2
150MH2.0
300
0.5
4.0
2.5m2
150MH2.5
375
0.5
5.0
3.0m2
150MH3.0
450
0.5
6.0
3.5m2
150MH3.5
525
0.5
7.0
4.0m2
150MH4.0
600
0.5
8.0
4.5m2
150MH4.5
675
0.5
9.0
5.0m2
150MH5.0
750
0.5
10.0
6.0m2
150MH6.0
900
0.5
12.0
7.0m2
150MH7.0
1050
0.5
14.0
8.0m2
150MH8.0
1200
0.5
16.0
9.0m2
150MH9.0
1350
0.5
18.0
10.0m2
150MH10.0
1500
0.5
20.0
11.0m2
150MH11.0
1650
0.5
22.0
12.0m2
150MH12.0
1800
0.5
24.0
200 W/m 2 Cable Mat
Tile/Stone Floor
Tile Adhesive/
Self-levelling compound
Cable Mat
Thermal Insulation
Concrete / Timber Floor
Area to be
heated (m2)
Product
Code
Output
(W)
Width
(m)
Length
(m)
1.0m2
200MH1.0
200
0.5
2.0
2.0m2
200MH2.0
400
0.5
4.0
3.0m2
200MH3.0
600
0.5
6.0
4.0m2
200MH4.0
800
0.5
8.0
5.0m2
200MH5.0
1000
0.5
10.0
6.0m2
200MH6.0
1200
0.5
12.0
7.0m2
200MH7.0
1400
0.5
14.0
8.0m2
200MH8.0
1600
0.5
16.0
9.0m2
200MH9.0
1800
0.5
18.0
10.0m2
200MH10.0
2000
0.5
20.0
Accessories
(All information is for guidance only)
FOR MORE
DETAILS
PLEASE VISIT
www.myheat.co.uk
12
Product Code
Description
MHTBB06
6mm Insulated Tile Backer Board (600mm x 1200mm)
MHTBB10
10mm Insulated Tile Backer Board (600mm x 1200mm)
MH3500
Touch Screen Thermostat (16A)
MH3232
Digital Progammable Thermostat (15A)
MH3131
Manual Analogue Thermostat (15A)
Underfloor Heating - MyHeat
MYHEAT® Underfloor Heating Cable Kits
MYHEAT® Underfloor Heating Cable Kits provide an underfloor
heating solution in the kitchen, bathroom or conservatory.
The cables are ideal for smaller installations, or in rooms with
an irregular layout, and can be fitted on top of existing wooden
or concrete floors that are sound and suitably prepared.The
flexibility of the loose cabling system makes it possible to heat
the maximum floor area including hard to reach areas.
Cable Kit includes:
•Heating cable
•Adhesive tape
•Floor primer & roller
Features:
•Ultra-thin cable
•Twin conductor ultra flexible cable simplifies installation
•Single “cold tail” connection lead
•Suitable for use in wet areas
•Low build height - minimal floor height build up
Heated Floor Area to be
covered (m2)
coverage at
160W/m2
coverage at
130W/m2
coverage at
100W/m2
c-c 7.0cm
c-c 9.0cm
c-c 11.0cm
0.4m2
0.5m2
0.7m2
1.00m2
1.4m2
•Conduit for floor sensor
•Installation instructions
•Guarantee
Cable Kit without Thermostat
Product
Code
Output
(W)
Length
(m)
0.6m2
MHCKE65
65
6.6
1.2m2
MHCKE120
120
11.4
1.7m2
2.1m2
MHCKE200
200
18.9
1.7m2
2.2m2
2.6m2
MHCKE250
250
23.6
2.3m2
2.9m2
3.5m2
MHCKE320
320
31.6
2.6m2
3.4m2
4.1m2
MHCKE400
400
36.9
3.3m2
4.2m2
5.1m2
MHCKE450
450
45.7
3.4m2
4.3m2
5.2m2
MHCKE520
520
49.6
4.5m2
5.8m2
7.1m2
MHCKE600
600
63.9
5.4m2
6.9m2
8.4m2
MHCKE750
750
75.8
Product Code
Description
6.1m2
7.9m2
9.6m2
MHCKE950
950
87.0
MHTBB06
6mm Insulated Tile Backer Board (600mm x 1200mm)
8.1m2
10.4m2
12.6m2
MHCKE1100
1100
114.5
MHTBB10
10mm Insulated Tile Backer Board (600mm x 1200mm)
9.2m2
11.9m2
14.5m2
MHCKE1300
1300
131.3
MH3500
Touch Screen Thermostat (16A)
11.2m2
14.3m2
17.5m2
MHCKE1700
1700
158.8
MH3232
Digital Progammable Thermostat (15A)
13.7m2
17.6m2
21.4m2
MHCKE2000
2000
194.5
MH3131
Manual Analogue Thermostat (15A)
Technical detail:
•Approximate Installed Loading: 150W/m2
•Cable Diameter: 3mm
•Operating Voltage: 230V, 50Hz
•Twin conductor cable
•Cold Tail Length: 3m
•Two extremely tough & durable insulation layers which minimise the risk of damage during installation and ensure prolonged cable life
•Approvals: IEC 60800
Accessories
MYHEAT® Dual Board
Overlay System
MHDB
The complete electric underfloor heating solution for under
carpet and vinyl floors.
MYHEAT® Dual Board Overlay System is a dry lay system that
creates a free floating subfloor that is extremely stable and is
instantly ready to receive the finished floor covering. Suitable for
laying over carbon heating film to provide a base to lay carpet,
linoleum and luxury vinyl. Installation is quick, clean & simple. The
system consists of a baseboard and top board, each with a layer
of contact adhesive.
Chosen floor covering
(Linoleum, Vinyl, Carpet)
Dual overlay boards
with staggered joints
Features:
•Allows carbon film to be installed under carpet and vinyl
•Creates a stable sub-floor for laying a variety of floor coverings
•Simple installation
•Low Build height – only 7mm
•Dual Board Overlay – Consists of a base board (3mm) and top board (4mm) with pre-applied contact adhesive to bond them together.
Carbon Heating Film
Thermal Insulation
Polyester
Vapour
Barrier
Concrete Sub-Floor
13
Underfloor Heating - MyHeat
MYHEAT® 18W Screed Kits
This In-screed Underfloor Heating Kit is an economical heating
solution in new build for screeded floors. Once installed the
screed can be covered with any floor finish.
In-screed Cable Kit includes:
•MYHEAT® 18W In-screed Cable
•Screed-Fix Galvanised Fixing Strip
•Double-Sided Foam Fixing Tape
Features:
•18W/lin m provides heating to new builds
•Tough and durable thick heating cable
•Suitable for all floor finishes in wet and dry areas
• Full metallic earth screen for total safety
Technical Detail:
•Cable Diameter: 5.0 - 5.9mm
•Operating Voltage: 230V supply
•Cable Type: Twin conductor cable
•Power loading: 18W/lin metre
•Cold Tail Length: 5m
•Approvals: IEC 60800
In-screed Cable Kit (not including thermostat)
Product
Code
Nom. 125W/m2
Room Area: m2
Spacing: 16cm
Nom. 140W/m2
Room Area: m2
Spacing: 14.3cm
Nom. 160W/m2
Room Area: m2
Spacing: 12.5cm
Output (W)
160
MHKE160
1.3
1.1
1.0
MHKE260
2.0
1.9
1.6
260
MHKE320
2.5
2.2
2.0
320
MHKE420
3.3
3.0
2.6
420
MHKE520
4.1
3.7
3.2
520
MHKE600
4.8
4.2
3.7
600
MHKE740
5.9
5.2
4.6
740
MHKE830
6.6
5.9
5.1
830
MHKE1000
8.0
7.1
6.2
1000
MHKE1200
9.6
8.5
7.5
1200
MHKE1500
12.0
10.7
9.3
1500
Accessories
Product Code
Description
MHSF10
Screed Fix Glavanised Fixing Strip - 10m
MHSF12
12mm x 10m Mi-Ti Tape
(Double-Sided Foam Tape for use with screed fix strip)
MHKE1700
13.6
12.1
10.6
1700
MH3500
Touch Screen Thermostat (16A)
MHKE2200
17.6
15.7
13.7
2200
MH3232
Digital Progammable Thermostat (15A)
MHKE2600
20.8
18.5
16.2
2600
MH3131
Manual Analogue Thermostat (15A)
MYHEAT® Thermal Insulation
For use with Carbon Film
MYHEAT® Insulated
Tile Backer Board
For use below Cable Systems
MHTH06
MYHEAT® Thermal Insulation is an extruded polystyrene
insulation material for use below wood or laminate floors in
conjunction with our carbon film underfloor heating elements.
The insulation is available in 6mm thick sheets and is
manufactured from recycled material free from ozone depleting
chemicals.
MHTBB06/10
MYHEAT® Tile Backer Board will significantly reduce heat losses
into the subfloor, improve performance and reduce the initial
warm-up time therefore reducing the energy consumption. It is
recommended when installing underfloor heating cables or mats
on all concrete subfloors.
Features:
Available in 6mm or 10mm thickness. Waterproof. Can be fixed
to any surface. Keyed surface ready to receive tile adhesive.
Easy to work with – cut with a knife or saw. Lightweight and easy
to handle.
Produced from a closed cell construction foamed polystyrene,
it has excellent thermal insulation properties. It MUST be used
below all Carbon Film Heating Systems.
Each board covers 1m2, simply order the number of boards you
require for your chosen floor area adding approximately 10%
for cutting wastage. Where threshold height limitations permit
in conservatories, we recommend installing a double layer of
insulation.
Features:
6mm thick. Excellent moisture resistance. Excellent sound
insulation. Levels small floor imperfections. Suitable for most floor
constructions. Easy to work with – cut with knife. Lightweight and
easy to handle. Required accessory for MYHEAT® Carbon
Film.
MHTH06
14
MHTBB06/10
Underfloor Heating - MyHeat
MYHEAT® Pre-wired Carbon Film Underfloor
Heating Element
500mm wide Element
Length (m)
Product Code
Output (W)
2.00
130MH520
122
2.50
130MH525
153
3.00
130MH530
183
3.50
130MH535
214
4.00
130MH540
244
4.50
130MH545
275
5.00
130MH550
306
5.50
130MH555
336
6.00
130MH560
367
6.50
130MH565
397
7.00
130MH570
428
7.50
130MH575
458
8.00
130MH580
489
8.50
130MH585
519
9.00
130MH590
550
9.50
130MH595
580
10.00
130MH5100
611
Length (m)
Product Code
Output (W)
2.00
130MH1020
252
2.50
130MH1025
315
3.00
130MH1030
378
3.50
130MH1035
441
4.00
130MH1040
504
4.50
130MH1045
567
5.00
130MH1050
631
5.50
130MH1055
694
6.00
130MH1060
757
6.50
130MH1065
820
7.00
130MH1070
883
Output (W)
7.50
130MH1075
946
130MH1080
1009
Installed as part of a refurbishment or new-build project,
MYHEAT® Pre-wired Carbon Film Underfloor heating can be
mounted on top of concrete or timber subfloors or built into
floors so that you can apply any finish that you wish. It is ideal
for installation where the intended floor finish will be a floating
hardwood, wood laminate or wooden parquet floor. It is also
equally suitable for carpets, vinyl and linoleum, when used with
the MYHEAT® dual board overlay system
Features:
•Dry installation - no self levelling compound required
•Suitable for most laminate and engineered hardwood floors
•Extremely low build height - less than 7mm
•Quick installation - roll out the film and connect
pre-wired elements
•Two heat outputs - 130W/m2 and 160W/m2 for
conservatory use
•Suitable for carpet and vinyl floors when used in conjunction
with MYHEAT® Dual Board Overlay System
Technical Data:
•Construction: Carbon based flexible
heating element
•Operating Voltage: 230V, 50Hz
•Output rating: 130W/m2 or 160W/m2
•Element Width(s): 300mm,
500mm & 1000mm
for max coverage
•Element Length: 2m
to 10m in 0.5m
increments
•Cold Tail Length:
5m
1000mm wide Element
Product Codes
300mm Wide Element
Length (m)
Product Code
2.00
130MH320
70
8.00
2.50
130MH325
88
8.50
130MH1085
1072
105
9.00
130MH1090
1135
130MH1095
1198
130MH10100
1261
3.00
130MH330
3.50
130MH335
123
9.50
4.00
130MH340
140
10.00
4.50
130MH345
158
Required Accessories
5.00
130MH350
176
Product Code
Description
5.50
130MH355
193
MHTH06
Thermal Insulation (800mm x 1250mm x 6mm)
6.00
130MH360
211
MHVB12
Polyester Vapour Barrier (1m x 12m)*
6.50
130MH365
228
MHVB25
Polyester Vapour Barrier (1m x 25m)**
7.00
130MH370
246
MH3500
Touch Screen Thermostat (16A)
7.50
130MH375
263
MH3232
Digital Progammable Thermostat (15A)
8.00
130MH380
281
MHAT50
Adhesive Tape (50mm x 50m roll)
8.50
130MH385
298
9.00
130MH390
316
9.50
130MH395
333
10.00
130MH3100
351
* 1m x 12m of PVB covers 10m2 of floor area
** 1m x 25m of PVB covers 22m2 of floor area
NOTE: To order 160 W/m2 element for conservatory use, substitute ‘130MH’ with ‘160MH’ in
your order code. Element rated at 160W/m2 is a NO EXTRA COST option.
15
Underfloor Heating - MyHeat
MYHEAT® Carbon Film
Professional Underfloor Heating Kit
Product Codes
MYHEAT® Carbon Film Kits for the professional installer are
available in 5m2, 10m2, 15m2 and 20m2 and include all the tools
for the installer. Simply cut the roll of 500mm wide film into
lengths and make the wiring connections using the supplied
crimping tool.
Product Code
Description
MHPK5
5m2 Kit
MHPK10
10m2 Kit
MHPK15
15m2 Kit
MHPK20
20m2 Kit
Required Accessories
Kit includes:
•Roll of 500mm wide carbon heating film
•Cable-to-Film Connection Crimps
•Power Connection Leads
(Brown & Blue)
•Mastic Tape
•Insulation Disks
•Ratchet Crimping Tool
•Installation Instructions
Features:
•Dry installation – no self levelling compound required
•Suitable for most laminate and engineered hardwood floors
•Extremely low build height – less than 7mm
•Available as – 5m2, 10m2, 15m2 and 20m2 kits
•Quick installation – simply cut the roll to length and connect
•Suitable for carpet and vinyl floors when used in conjunction
with the MYHEAT® Dual Board Overlay System
Product Code
Description
MHTH06
Thermal Insulation
(800mm x 1250mm x 6mm)
MHVB12
Polyester Vapour Barrier (1m x 12m)*
MHVB25
Polyester Vapour Barrier (1m x 25m)**
MH3500
Touch-Screen Thermostat (16A)
MH3232
Digital Programmable Thermostat
(15A)
MH3131
Manual Room Thermostat (15A)
MHAT50
Adhesive Tape (50mm x 50m roll)
* 1m x 12m of PVB covers 10m2 of floor area
** 1m x 25m of PVB covers 22m2 of floor area
Additional Accessories
Product Code
Technical Detail:
•Construction: Carbon based flexible heating film
•Operating Voltage: 230V, 50Hz
•Heat output: 130W/m2
•Element Width: 500mm
Description
MH1001
10 x Connecttion Crimps
MH1002
1.5mm2 x 10m Cold Tail Leads (Blue)
MH1003
1.5mm2 x 10m Cold Tail Leads (Brown)
MH1004
1000mm x 101mm Mastic Tape
MH1005
20 x Green Termination Disks
MYHEAT® Mirror Demister
MYHEAT® Mirror Demister Pads are the simple and totally safe
answer to steamed-up mirrors in wet areas such as Bathrooms,
Shower Rooms and En-Suites.
Features:
•Ultra-Slim Pad fits behind existing or new mirror
•Self-Adhesive for easy installation
•Integrate into lighting circuit for automatic operation
when light is switched on
•Very low energy consumption
•Can be used in multiples to cover larger areas
ASK IN BRANCH FOR PRODUCT LISTING AND FURTHER INFO
MYHEAT® Ice Prevention & Snow Melting Cable
MHS heating cable mats are rated at 300 watts/m² and are used
for ice and snow melting of outdoor areas and other applications
where the cable is embedded in concrete.
The most common application in industry is the heating of ramp
or loading platforms in factories and warehouses, where an ice
prevention system can reduce the risk of accidents and ensure
work can be carried out at all times.
Before
Features: Approved to IEC 60800. 300w/m² power density
provides clear, safe access for pedestrians and vehicles on
pavements and drives. Suitable under concrete, paviours and
asphalt.
ASK IN BRANCH FOR PRODUCT LISTING AND FURTHER INFO
16
Bathroom Heating - Towel Rails
Is there any better feeling than stepping out of the shower to a warm, snug towel on a winter’s morning? There
are many shapes, sizes and finishes but they all keep you as snug as a bug in a rug!
B
Ladder Style Towel Rail
Ladder style towel rail available in sparkling
chrome plated.
TRL100CHR
•Compact slimline design.
•IP44
•Weight: 3.7 kg
•High polish. Stainless steel
A
B
Code
Wattage
A
B
C
TRL100CHR 100W 870mm530mm105mm
60W ‘S’ Shape Towel Rail
A
Chrome
TR Range
Stylishly designed dual energy
towel radiators.
C
Finish
• Wall mounting.
• Compliance with BSEN60335-2.
C
• Available in White or Chrome finish.
B
B
Code
Wattage
A
B
1.7 kg
1.7 kg
TRS60CR 60W
527mm 570mm
27mm
527mm 570mm
27mm
TBB Range
TBC Range
150W, 300W and 600W
•The two larger models have a
thermostat and boost facility.
A
Weight
TRS60WH 60W
TBB/TBC Range
White: 3 Models Available:
A
C
Chrome: 3 Heat Outputs Available:
C
Code WattageA
B
150W, 300W and 500W
•The two larger models are fitted with thermostats
for added controllability.
C
C Finish
TB150 150W 700mm500mm80mm
TBB8 300W 870mm500mm80mm
TBB12 600W 1280mm500mm 80mm
Controls
Code WattageA
B
C Finish
Controls
TC150 150W 800mm500mm80mm Chrome
No controls
TBC8 300W 870mm500mm80mm ChromeThermostat
TBC12 500W 1280mm500mm 80mm ChromeThermostat
White
No controls
White Thermostat / Boost
White Thermostat / Boost
TTR Range
B
TTR Range
•Water glycol filled. Mains neon indicator.
•Larger models will help to take the chill
off a small bathroom or cloakroom.
•Splash-proof (IPX5 rated) for use in bathrooms and other wet areas.
•Supplied with wall mounting brackets as standard.
A
C
Code
TTRC90
TTRS120
TTRC130
* Including wall
17
Wattage
A
B
C
Finish
90W
616mm 533mm 93mm* Chrome
90W
616mm 533mm 93mm*
White
130W
851mm 533mm 93mm* Chrome
bracket 93mm
Bathroom Heating - Heat & Light Unit
Bathroom Heat & Light Unit
B
BHL750
• 750W heating.
• Max. 100W ES lamp.
• Ceiling mounted.
A
Code
BHL750
• Chrome finish.
Wattage
750W
A
B
Weight
155mm
330mm
8.9 kg
Bathroom Heating - Downflow Heaters
Downflow Heater
B
DF20
•Selectable 1kW or 2kW output
(on installation).
•Thermostatic output control.
A
•Pull cord operation.
CodeWattage A
DF20
B
C Weight
2000W 240mm235mm125mm
1.3 kg
C
2kW Downflow Heater
B
FX20V
Powerful 2kW output ensures a fast
warm-up, although 1kW is selectable
on installation for smaller rooms.
FX20E
FX20VL
•Simple to install. Pull cord operation.
•Neon on/off indicator. IPX2 rated.
A
•FX20VE models:
Adjustable timer version of FX20V.
•FX20VL models:
Safety thermostat version of FX20V.
C
Code
Wattage
FX20 Range 2000W B
A
B
C
Weight
242mm
229mm
109mm
1.1 kg
Compact IPX4 Rated
Downflow Heater
Timer
Version
Available
FX20IPX4
• 2kW maximum output.
• Pull cord operation.
A
• Energy saving thermostat switches output down to 1kW once the room is warm (functions on 2kW setting only).
• 1kW output selectable on installation. CE and BEAB Approved.
Code
Wattage
A
B
C
FX20IPX42000W 267mm252mm132mm
C
18
Weight
1.35 kg
Focal Point Electric Fires
Electric fires provide a wonderful feeling of comfort and cosiness whilst adding a distinctive and modern design
to your home. You can enjoy a warm glow without the mess and maintenance of a real fire. The flame effect
can also be used independently of the heating, to enjoy the appearance of the flames without overheating the
room - ideal for those dark but mild evenings.
FREESTANDING FOCAL POINT ELECTRIC FIRES
Our range of electric fires are quick and easy to install. There’s a variety of designs to suit all decors and budgets with extremely
realistic flame effects. Enjoy the benefits of a fire at the flick of a switch.
BRAYFORD
CHERITON
LYNDHURST RADIANT BAR
• Compact stove designed to fit in or
on a standard fireplace and hearth.
• Optiflame® effect and real coals.
• Traditional style freestanding fire.
• Fits ‘flat to wall’ - no inset required.
• Flickering log effect.
• Optiflame® log effect.
• Flame effect can be used
independently of heat source.
• 2kW Fan heater.
• Low energy version available.
• 2kW Radiant heat with economiser
control and 700W convected heat.
FREESTANDING FIRE SUITES
Designed to meet the needs of social housing providers and their tenants. With a range of safety and energy-saving features, the
Calgary is easy to install, economical to run and low on maintenance.
CALGARY FIRE SUITE
ROCHESTER FIRE SUITE
VANCOUVER FIRE SUITE
Cream marble effect back panel and
hearth, with mahogany effect surround
and brass effect fire.
Maple effect surround with
black back panel and hearth
and chrome effect fire.
Natural oak effect surround, cream
marble effect back panel and hearth
with brass effect fire.
FULL RANGE AVAILABLE TO ORDER
ASK YOUR LOCAL BRANCH FOR MORE DETAILS
19
Freestanding Domestic Heating
Silent, instant heat from a small portable source, which is great for warming up a room when the central heating
is not switched on. We also do a turbo version that has a built-in fan to give you an added boost. Both are
controlled by a stat so when you get that cosy feeling, it turns off and saves you money.
2kW Convector Heater
B
DCSTD
•3 Heat settings: 750W, 1.25kW, 2kW
•Illuminated control switches
•Fully adjustable thermostat
A
•Over heat protection
•Secure wall mounted option – brackets and fixings included
•Fitted with 1.5M flex and plug top. Built in carry handles.
Code
Wattage
A
B
C
Weight
DCSTD 2000W 580mm420mm200mm2.8 kg
C
2kW Convector Heater
with Timer
B
DCTIME
•3 Heat settings: 750W, 1.25kW, 2kW
•Fitted with 1.5M flex and plug top
•Secure wall mounted option – brackets and fixings included
•Fully adjustable thermosta
A
•Over heat protection
•Built in carry handles
Code
C
DCTIME
Wattage
A
B
Weight
2000W
580mm420mm200mm
2kW Convector Heater
with Turbo Fan
B
C
2.9kg
DCFAN
•3 heat settings: 750W, 1.25kW, 2kW
•lluminated control switches
•Fully adjustable thermostat
•Over heat protection
A
•Secure wall mounted option - brackets and fixings included
•Fitted with 1.5M flex and plug top. Built in carry handles.
Code
C
Wattage
DCFAN 2000W
20
A
B
C
580mm420mm200mm
Weight
3 kg
Oil Filled Radiators
Oil filled radiators with a totally enclosed heating element provide a safe and reliable source of heating for both
domestic and commercial applications. This range of oil filled radiators provide radiant heat, with the internal
thermostat controlling its output once the required room temperature has been reached. Their manoeuvrability
makes them very versatile, and no moving parts means they are silent in operation
and are great for people who suffer from dust allergies.
B
Oil Filled Radiators
B
DOH Range
•1.5kW, 2kW & 2kW Timer
versions available
•Integral cable and plug storage facility
•Fitted with 1.5M flex and plug top
•Power indicator light
A
A
• Multi-directional castors
•Fully adjustable thermostat
•Over heat protection
•Anti tip cut-out protection
•IP20
•Fins: DOH157 - 7 fins, DOH211- 9 fins, DOH211T- 9 fins
C
C
Timer Versions Available
Settings
Dimensions
Code
Wattage
A
B
C
DOH157 1500W 625mm320mm240mm
DOH211 2000W 625mm420mm245mm
DOH211T2000W 625mm420mm245mm
Weight
Code
Wattage
5.8 kg
9.1 kg
9.3 kg
DOH157
DOH211
DOH211T
1500W
2000W
2000W
Heat Settings
Timer
600W, 900W, 1500W
800W, 1200W, 2000W
800W, 1200W, 2000W
No
No
Yes
Fan Heater
2kW Fan Heater
FH201
• 2 Heat settings (1.0kW / 2.0kW)
A
• Thermostat
• Auto re-set thermal cut-out
B
C
21
Code
Wattage
A
B
C
FH201
2000W 150mm260mm265mm
Weight
1 kg
Overdoor, Screen & Plinth Heaters
Our powerful screen heaters provide a curtain of warm air at the entrance to offices, shops and show rooms.
The heaters add heat where it is being lost when external doors are opened on a frequent basis. Plinth heaters
are sturdy and long-lasting, providing the ideal solution when floor space is limited or portable heaters are
impractical.
B
Screen Heater
C
• Adjustable bracket to direct heat.
• 1.5kW or 3kW output.
• Heat setting options with cool & hot air
operation.
• Fitted with 1.25 metre 3 core cable.
• Safety cut out should the unit overheat.
Resets itself once the unit has cooled down.
• Can be wall or ceiling mounted.
• IP20 rated.
A
Code
SH3WH
Wattage
A
3000W (max)105mm
B
C
Weight
580mm
180mm
6 kg
B
Overdoor Heaters
• Provides a ‘warm welcome’ above
single/double doorways.
• Integral control over full heat, half heat
& fan only settings.
• Adjustable air flow direction.
• Can be used as a high level fan heater.
• Also available the AC3RN - for use in
single doorways with the increased
convenience of an infra-red
remote control.
A
C
B
C
Weight
1500/3000W200mm*
605mm
135mm
AC3RN
1500/3000W200mm*
* Add 14mm for total installed height.
605mm
135mm
5.1 kg
5.3 kg
Code
AC3
Wattage
A
Plinth Heater
A
C
Code
PFH2400
Wattage
A
2400W (max)125mm
B
C
Weight
480mm
220mm
4.84 kg
AC3
AC3RN
Recessed
Version
Available
DPFH2400
• 3 heat settings: 800W, 1600W & 2400W.
• Thermostatically controlled with
thermal cut out.
• Brown, White and Steel fascia included.
• Four rubber feet - no vibration easy to install.
• Pre-wired with 1.5 metres of cable­­.
B
DSH3WH
Suspended Ceiling Heater
B
300W Radiant Heating Panel
A
C
Code
E300U
Wattage
300W A
592mm
B
592mm
C
Weight
30mm
5.0 kg
An economical and draught free means of heating in commercial
premises. Can be mounted surface on ceiling or in suspended
ceilings
• Energy efficient only 300 watts
• Integral insulation ensures 99% of radiant heat is transferred into room
• Ceiling mounted frees up wall space
• Designed for quick and easy installation
22
Tubular Heaters and Guards
These steel constructed tubular heaters and guards are the ideal solution when low cost heating is required
for domestic or commercial applications.Typical applications include garages, workshops, greenhouses and
conservatories. Wire guards are strongly recommended for use with the above, where the heater could be
exposed to small children or the elderly for added safety.
IP44 Tubular Heaters
•Thermal overload cut out.
•Pre-wired with 1.8m
•Link facility and mounting kit included.
•Suitable for bathroom Zone 2
if hardwired.
IP44 Tubular Heaters
DTHFT Range
DTHG Range
•Provides sturdy protection
to tubular heaters c/w fixing kit.
•Steel construction
•Provides sturdy protection
to tubular heaters.
•Fixing kit supplied.
A
Wattage
DTH1FT060
DTH2FT120
DTH1FT180
DTH1FT240
60W
120W
180W
240W
A
Code
Width
Diameter
305mm
600mm
915mm
1220mm
B
DTHG1FT125mm
DTHG2FT125mm
DTHG3FT125mm
DTHG4FT 125mm
325mm
630mm
920mm
1230mm
B
A
B
C
Code
HHG Range
Guards
Guards
HHT Range
•Pre-wired with 1.5m (HHT)of cable
and 3 pin plug.
•Built in thermostat
C
Cable
55mm
55mm
55mm
55mm
1.8m
1.8m
1.8m
1.8m
HHT205
HHT210
HHT215
55W
120W
190W
C
Colour
A
White
White
White
White
HHG205
HHG210
HHG215
150mm
150mm
150mm
150mm
Code
Wattage
Code
500mm
1000mm
1500mm
Width
500mm
1000mm
1500mm
B
550mm
1050mm
1550mm
Diameter
Cable
40mm
40mm
40mm
1.5m
1.5m
1.5m
C
Colour
90mm
90mm
90mm
White
White
White
Frost Protection
The perfect solutions to protect your property and piping from frost and freezing conditions.
200W INCA Frost
Protection Heater
B
CH-200
• Splash proof IPX4
A
• Variable thermostat
• Neon power on indicator. Safety thermal cut out
C
Code
CH-200
Wattage
200W
A
B
C
125mm300mm 70mm
• Wall mounting bracket included, supplied with 1.8m plug and flex
Weight
0.89 kg
B
400W Convector Heater
•Metal case, thermoplastic, white
DFPH400
•Wall mounted
A
•Control lamp
•The thermostat switch automatically switches
the frost detector on/off.
C
Code
Wattage
DFPC400 400W
A
B
C
242mm260mm105mm
Weight
•Thermostat operates within the range of + 5ºC to 30ºC (approx).
0.83 kg
•The thermal cut-out will turn the heater off should it overheat.
Frost Protection Heat Tape Also Available
ASK YOUR LOCAL BRANCH FOR MORE DETAILS
23
Halogen/Infra-Red Heaters
Good old fashioned heat from heaters that have been used for a long time, if you need a small wall mounted
heat source with long life - this is it! Ideal for rooms like the garage, these heaters provide a heating system
with low energy intensity and require minimal maintenance. The heaters provide directional heat and only warm
surrounding persons and objects and not the air, making them very economical to run.
Infra-Red Heater
B
•2 heat settings - 600W, 1.2kW.
•Direct radiant heat.
A
•Adjustable directional wall mounting
bracket.
C
CodeWattage A
QH12
B
•Pull cord operated.
C Weight
600W 170mm560mm130mm
•Fitted with 1.5mtr flex and plug top.
1.7 kg
•Plug top can be removed for hard-wired installations.
Infra-Red Heater
B
A
•Choice of heat settings on IRX120N.
•Designed to provide rapid beamed
warmth.
Code
Wattage
A
B
C
1200W
92.5mm 764mm 114mm
IRX200N
2000W
92.5mm 764mm 114mm
•Pull cord operation.
2 kg
2.1 kg
•1 year guarantee.
Sun Prince Quartz Halogen
Infra Red Heaters
B
A
C
•Ideal for heating applications in draughty
or tall buildings such as warehouses and
garages, and difficult-to-heat situations
where convection heating would be
impractical.
B
SP1000H
•Sunprince lamps last an average 7000 hrs.
A
•Instantaneous cost effective heating.
B
•Stylish and robust construction.
•Allows heating of targeted areas.
A
•Silent operation and instant switch on/off.
SP4500H
C
•Chrome plated safety guard.
•Grey powder coated steel chassis.
•High quality gold and ruby lamps. See table
SP3000H
C
•Wall mounted - bracket included.
Code
Wattage
A
B
C
SP1000H 1000W 198mm 474mm 141mm
SP3000H 3000W 198mm 474mm 141mm
SP4500H 4500W 198mm 474mm 141mm
IRX1200N
•All models are IP24 rated - suitable for
permanent installation internally or
externally.
Weight
IRX120N
IRX120N
•All models have adjustable beam angle
to direct heat where it’s needed.
C
DQH1200
•Not suitable for outdoor use.
No. of Lamps
x1 Gold
x2 Ruby
x3 Ruby
24
SP1000H
SP3000H
SP4500H
Halogen Heater - Portable
1.2kW Halogen Heater
DH1200
•3 Heat settings:
(400W, 800W and 1.2kW oscillating)
A
• Safety tip-over switch
• Portable
Code
A
B
C
Weight
DH1200 1200W 560mm350mm176mm3.1 kg
C
B
Wattage
Outdoor Patio Heaters
These radiant heaters provide highly directional heat; the majority of which heats people and not the air around
them. This makes them highly efficient outdoors and kind to the environment. Where stylish, discreet, yet highly
effective heating is required, this is an ideal solution for heating any patio, terrace or outdoor smoking area.
­Outdoor Patio Heaters
B
OPH13
•Low energy user (2kW) giving
substantially reduced emissions
compared to gas heaters
OPH20
•High quality aluminium case finished
in two-tone silver
A
•1.3kW Quartz Infra-red model
C
•2.0kW Quartz halogen model with “gold” lamp for extended
performance
Code WattageA
B
C Element
OPH13 1300W 159mm594mm144mm
OPH20 2000W 159mm594mm144mm
•Designed and rated for permanent external installations
Infra-red
Halogen
•Weight: 3.4Kg
•IPX4 rated
B
2000W Wall Mounting/
Pedestal Patio Heaters
C
PH2000PED
•3 Heating powers:
650W/1350W/2000W
•Quartz tube heating.
A
•Over heating protection
•Waterproof
•Adjustable angle
•Tilt angle cut-off for safety
•Fitted with cable and plug
Code WattageA
B
1300W Halogen Heater
C Element
PH2000PED
2000W 159mm594mm144mm
DPAT1300
•Adustable mounting bracket
Halogen
•Highly polished reflector ensures
the heat is directed effectively.
Shatter resistant ceramic glass
B
•IP44
Code
A
Wattage
A
B
C
DPAT1300
1300W 200mm400mm180mm
C
25
Element
Halogen
Central Heating Controls & Thermostats
CENTRAL HEATING CONTROLS
CENTRAL HEATING CONTROLLERS:
CENTAUR PLUS RANGE:
• Rated Switching: 3A (1A)
• 3 On / 3 Off
• Industry Standard Plate
• Boost / Advance Options
SHC1CH 1 Channel
SHC2CH2 Channel
•
•
•
•
•
Rated switching: 5A (2A)
14 On / 14 Off
Universal back plate
1 Min timer
Timed advanced
boost options
C11 Centaur Plus 1 channel,
24 hour. Ideal for combi boilers
C17 Centaur Plus 1 channel, 7 day
C21 Centaur Plus 2 channel,
24 hour. Independent settings
for HW & CH
C27Centaur Plus 2 channel, 7 day
TWO CIRCUIT ELECTROMECHANICAL 24HR:
425TIARA
CHANNEL PLUS RANGE:
•
•
•
•
Second generation programmers
that offer up to four independent
channels and feature improved
display and easier programming.
Rated Switching: 5A (2A)
2 On / 2 Off
Industry Standard Plate
Advance Control Option
H21XLChannel Plus 2 channel, 24 hour
H27XLChannel Plus 2 channel, 7 day
H37XLChannel Plus 3 channel, 24 hour
ECONOMY 7 HOT WATER CONTROLS
ECONOMY 7 HOT WATER CONTROLLER
WITH BOOST: SHCE7
•
•
•
•
ELECTRONIC BOOST 1 OR 2 HR
CONTOLLER FOR ECONOMY7:
BX2000
Rated Switching: 13A
48 On / 48 Off
15-120 Min boost timer
Suitable for single and twin
immersion heaters
•
•
•
•
•
ECONOMY 7 IMMERSION HEATER
CONTROLLER: E7/QUARTZ
•
•
•
•
•
•
Rated Switching: 13A
No neutral required
Industry standard plate
Suitable for single and twin immersion heaters
Unit must be fed by an Economy7 and on-peak supply
ELECTRISAVER RANGE
Rated Switching: 13A
1 On / 1 off
Industry standard plate
No neutral required
4.5-7 Hrs
Suitable for single and twin
immersion heaters
•
•
•
•
•
Rated: 13A 3kW
Industry Standard Plate
24 Hr Timer
30, 60, 90 Min Boost Options
Suitable for single and twin
immersion heaters
TRTD7
Digital Timer w/Boost Control
ELECTRONIC VERSION OF
E7/QUARTZ: ELECTRONI7
• Rated switching: 13A
• 1 On / 1 off
• No neutral required. Up to 3 off peak pettings
• Suitable for single and twin immersion heaters
TRTM7
Analogue Timer w/ Boost Control
26
Controls, Timers & Thermostats
GENERAL PURPOSE 7 IMMERSION HEATER TIMERS
GENERAL PURPOSE AND
IMMERSION HEATER TIMER*:
IHTGPT01
GENERAL PURPOSE BOX MOUNTED
24HR TIMER*:
SBSTUZHO
• Rated Switching: 16A (8A)
• 48 On / 48 Off
• Manual override
• Voltage free contacts
(*Not suitable for discharge lighting)
•
•
•
•
24HR ELECTRONIC IMMERSION
HEATER TIMESWITCH:
NTT06
WEATHERPROOF TIMER
MULTI RANGE WEATHERPROOF
TIMER:
MRT-16/WP
• Rated Switching: 16A (4A)
• Manual Override
• Voltage Free Contacts
•
•
•
7 DAY ELECTRONIC VERSION AVAILABLE: NTT07
Rated Switching: 16A (8A)
48 On / 48 Off
Manual override
Voltage free contacts
IP66
Rated Switching: 16A
3A - Compact Fluorescent
Adjustable Timer: 1 Sec - 2 Hrs
CONTROL SWITCHES & TIMERS
TIME FUSED SPUR 7 DAY:
T205-C
• Rated Switching: 13A (6A)
• 28 On / 28 OFF
• Fits 25mm back box
2HR ELECTRONIC BOOST TIMER:
TGBT4
•
•
•
•
ELECTRISAVER RANGE:
The Electrisaver is a simple push button electronic timer
that saves energy by remembering to switch off when
you forget.
E30
Rated: 13A (5A)
Neutral required
Up to 2 hrs
15, 30, 60, 120 Min
boost options
Immersion Heater Time
Lag Switch:
TLSWHB
• Rated: 13A (1A)
• Economy 7 Boost
• 15 Min - 2 Hrs
• 30, 60, 120 minute boost period.
Can’t See What You’re After?
Talk to your local Denmans Branch - we have many more models in stock
Please Note: All information is for guidance only.
27
Central Heating Controls & Thermostats
THERMOSTATS
ROOM THERMOSTAT: ROOMSTAT
• Rated switching: 16A (4A)
• Temperature range: 10 to 30ºC
• No neutral required
TLM and TLX SERIES
Electromechanical range for medium to heavy duty
applications. High specification and reliability.
PIR/THERMOSTAT COMBI: WAPIRTH
• Rated Switching: 6A
2A - Compact fluorescent
1A - Fan/discharge lighting
• No neutral required
• 10 Sec - 40 min in 9 steps
TLX2358 3-27ºC 2A
Changeover Thermostat
TLM2453 3-27ºC 16A
Concealed Thermostat
TLX9201
Standard Thermostat
TLX9701
Tamperproof Thermostat
FROST THERMOSTAT:
FROSTSTAT
• Rated switching: 16A (4A)
• Temperature range: -5 to 10ºC
• No neutral required
PROGRAMMABLE ELECTRONIC
ROOM THERMOSTAT: ET2
• Rated switching: 5A (3.5A)
• 4 On / 4 Off
• Temperature Range: 5 to 35ºC
• No neutral required
• 4 Periods / 24 hrs
CONVENTIONAL ROOM THERMOSTAT:
HRT3
• Rated Switching: 10A
• Temperature Range: 5 to 30ºC
7 PROGRAMMABLE ELECTRONIC
ROOM THERMOSTAT:
CENTSTAT7
• Rated switching: 8A
• 3 On / 3 Off
• Temperature range: 5 to 30ºC
• Neutral required
• 24 Hrs
CYLINDER THERMOSTAT:
HCT2
• Rated switching: 16A
• Temperature range: 20 to 90ºC
• No neutral required
• Changeover contacts
• Supplied w/ strap & buckle
24HR PROGRAMMABLE THERMOSTAt: CSTAT11M
• Rated Switching: 8A
• 3 On / 3 off
• Temperature range: 5 to 30ºC
• No neutral required
• Voltage free contacts
7 DAY VERSION ALSO AVAILABLE: CSTAT17M
KEY
+
+
Battery powered
WIRELESS THERMOSTATS
WIRELESS DIGITAL ROOM THERMOSTAT + RECEIVER:
TLX1010
SUNSTAT RF WIRELESS
PROGRAMMABLE
THERMOSTAT + RECEIVER:
SUNSTATRF
+
+
WIRELESS 7 DAY PROGRAMMABLE THERMOSTAT + RECEIVER:
TLXRFPV/N
WIRELESS ROOM
THERMOSTAT:
RFWRT
•
•
•
•
•
+
Rated Switching: 16A (3A)
4 On / 4 off
Temperature Range: 5 to 45ºC
Requires 4x AA batteries
Receiver requires neutral
Please Note: All information is for guidance only.
28
+
Netatmo Wi-Fi Enabled Thermostat
MONITOR AND CONTROL YOUR HEATING REMOTELY: Use your Netatmo Thermostat to change your home’s
temperature, from your bed or from the other side of the world.
Netatmo Wi-fi Enabled Thermostat
SMART HEATING IN YOUR HOME:
The thermostat sets a program to reflect your habits. For optimal
comfort, it predicts the start of the heating periods depending on
your household insulation and the temperature outside. This way,
you’ll benefit from the right temperature at the right time.
A SIMPLE STEP FOR YOU, A BIG STEP FOR PLANET EARTH:
The thermostat saves up to 25% of your energy consumption
and reduces your carbon footprint.
•Use your smartphone or tablet to remotely monitor and adjust your heating from your car or from the other side of the world.
•Probably the most attractive and unique looking Wi-Fi thermostat available
•Option to mount on the wall or can be free-standing.
•Latest E-ink display technology (similar to Kindle)
•Adjust the temperature directly on the thermostat or remotely from your smartphone, tablet or PC.
•For those wanting to closely monitor their heating system, the App and PC software provides graphical representation of the heating systems performance
•Very quick and easy to install by the user (30 mins)
29
Nest Learning Thermostat™
OFFER THE LATEST
IN ENERGY SAVINGS AND HOME SAFETY
The Nest Learning Thermostat and Nest Protect: Smoke + Carbon Monoxide alarm work together
so they’re easier to package together. Stand out from the competition to win quotes for new business,
and offer more services to your existing customers. Sign up now to become a Nest Pro at no cost.
You’ll get product training, live VIP support, sales tools, customer referrals and more.
Let’s work together.
nest.com/pro
For more information contact your branch or visit www.denmans.co.uk
30
Notes:
31
Branch List
DENMANS ELECTRICAL WHOLESALERS TERMS AND CONDITIONS: All items subject to availability. ­­­Due to range extensions and continuous development, products may vary to those illustrated. Offers are subject to Denmans terms and
conditions (copy available on request). All items are subject to availability, please check before travelling. All information and images are for guidance only. It is the installers responsibility to ensure that the products are correct for the application.
Download PDF