Alpine | INA-N333R | Owner`s manual | Alpine INA-N333R Owner`s manual

R
EN
INA-N333R
DE
GPS Car Navigation/CD Receiver
FR
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
IT
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• GEBRUIKSAANWIJZING
Gelieve de gebruiksaanwijzing te lezen alvorens
met dit toestel te werken.
ES
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
• BRUGERVEJLEDNING
Læs venligst denne vejledning, før du tager
enheden i brug.
NL
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Phone 03-9769-0000
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7, 40878 Ratingen,
Germany
Phone 02102-4550
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
Sankei Kikaku Co., Ltd.
1-13-38, Hinodai, Hino, Tokyo, Japan
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway,
Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris
Nord II, B.P. 50016, 95945 Roissy
Charles de Gaulle Cedex, France
Phone 01-48638989
SE
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava) - APDO 133,
Spain
Phone 945-283588
Designed by ALPINE Japan
Printed in Japan (S)
68P50520Y74-O
DK
CHA-S634
•
•
•
•
•
•
•
•
CD changer for INA-N333R.
CD-Wechsler für INA-N333R.
Changeur CD pour INA-N333R.
Cambia CD per INA-N333R.
Cambiador de CD para INA-N333R.
CD-wisselaar voor INA-N333R.
CD-växlare för INA-N333R.
Cd-skifter til INA-N333R.
CHA-1214
•
•
•
•
•
•
•
•
CHM-S630
CD changer for INA-N333R.
CD-Wechsler für INA-N333R.
Changeur CD pour INA-N333R.
Cambia CD per INA-N333R.
Cambiador de CD para INA-N333R.
CD-wisselaar voor INA-N333R.
CD-växlare för INA-N333R.
Cd-skifter til INA-N333R.
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW
PLAY BACK.
Von Alpine CD-Wechslern haben Sie mehr!
Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.
Der CHA-S634 ist ein Hochleistungs-Wechsler für 6 CDs mit dem neuen M-DAC, mit CD-R/RW- und MP3-Wiedergabefunktion und
mit CD-TEXT. Der CHA-1214 ist ein Ai-NET-Modell für 12 CDs. Der M-Bus-kompatible CHM-S630 ist ein superkompakter Wechsler
für 6 CDs mit CD-R/RW-Wiedergabefunktion.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK,
MP3 PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6
disques super compact doté de la fonction CD-R/RW PLAY BACK.
I caricatori CD Alpine danno di più!
Più scelta, più versatilità, più comodità.
Il modello CHA-S634 è un caricatore a 6 dischi ad elevate prestazioni dotato di un nuovo M DAC, CD-R/RW PLAY BACK, MP3 PLAY
BACK e CD TEXT. Il modello CHA-1214 Ai-NET è in grado di contenere 12 dischi, il modello CHM-S630 M-Bus è un caricatore a 6
dischi ultra compatto dotato di un CD-R/RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD
TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño
reducido con un CD-R/RW PLAY BACK.
CD-wisselaars van Alpine hebben meer te bieden!
Meer muziekkeuze, meer veelzijdigheid, meer gebruiksgemak.
De CHA-S634 is een op hoog niveau presterende wisselaar voor 6 discs met een nieuwe M DAC, weergavefuncties voor
CD-R/CD-RW en MP3 en een displayfunctie voor CD-TEKST. De CHA-1214 is een Ai-NET model voor 12 discs en de MBus compatibele CHM-S630 is een ultracompacte wisselaar voor 6 discs met weergavefuncties voor CD-R/RW.
Alpines CD-växlare ger mer!
Fler musikval, mer variation, större bekvämlighet.
CHA-S634 är en växlare för 6 skivor med mycket höga prestanda och en ny M D/A-omvandlare samt uppspelning av CD-R/RW, MP3
och CD TEXT. CHA-1214 Ai-NET rymmer 12 skivor. CHM-S630 M-Bus är en mycket kompakt växlare med kapaciteten 6 skivor med
uppspelning av CD-R/RW PLAY BACK.
Med Alpine-cd-skiftere får du mere!
Flere musikvalg, mere alsidighed og mere bekvemmelighed.
CHA-S634 er en højtydende 6-disc skifter med en ny type M DAC, CD-R/RW PLAY BACK, MP3 PLAYBACK og CD TEXT. CHA1214 Ai-NET modellen har kapacitet for 12 discs og model CHM-S630 M-Bus er en superkompakt 6-disc skifter med CD-R/RW
PLAYBACK.
ENGLISH
Contents
Operating Instructions
WARNING
WARNING .................................................. 3
CAUTION ................................................... 3
PRECAUTIONS ......................................... 3
Basic Operation
Detaching the Front Panel .................................. 5
Attaching the Front Panel .................................. 5
Initial System Start-Up ...................................... 5
Turning Power On and Off ................................ 5
Display Angle Adjustment ................................. 6
Adjusting Volume/Balance (Between Left and
Right)/Fader (Between Front and Rear) ......... 6
Automatic Position Display ............................... 6
Radio Operation
Switching the Tuner Mode ................................. 7
Listening to Radio .............................................. 7
Manual Storing of Station Presets ..................... 7
Automatic Memory of Station Presets ............... 8
Tuning to Preset Stations ................................... 8
Station Title Search Function ............................. 8
RDS Operation
Setting RDS Reception Mode and Receiving
RDS Stations .................................................. 9
Recalling Preset RDS Stations ........................... 9
Receiving RDS Regional (Local) Stations ........ 9
PI SEEK Setting ............................................... 10
Receiving Traffic Information .......................... 10
PTY (Programme Type) Tuning ...................... 10
Receiving Traffic Information While Playing
CD or Radio .................................................. 11
Priority PTY (Programme Type) ...................... 11
Displaying Radio Text ..................................... 11
CD Player Operation
Opening and Closing the Movable Display ..... 12
Playback ........................................................... 12
Music Sensor (Skip) ......................................... 13
Fast Forward and Backward ............................ 13
Repeat Play ...................................................... 13
M.I.X. (Random Play) ..................................... 13
Scanning Programmes ..................................... 13
Other Functions
Displaying the Title/Text .................................. 14
Titling Discs/Stations ....................................... 15
Erasing Disc Title/Station Title ........................ 15
Sound Setup Operation
Turning Loudness On/Off ................................ 16
Turning Defeat Mode On/Off .......................... 16
Switching the Phase of the Subwoofer Output .. 16
Setting the Bass Control .................................. 17
Setting the Treble Control ................................ 17
SETUP Operation
Changing Backlighting Colour ........................ 18
Sound (Beep) Guide Function ......................... 18
Displaying Time ............................................... 18
Setting Time ..................................................... 19
Setting the Clock Auto Adjustment ................. 19
Subwoofer On and Off ..................................... 19
Scroll Setting .................................................... 19
Navigation Interruption and Adjusting its
Volume (NAVI MIX) .................................... 20
Auto Volume Setting ........................................ 20
Setting the AUX Mode (V-Link) ...................... 20
Turning Mute Mode On/Off ............................. 21
Adjusting Source Signal Level ........................ 21
Demonstration .................................................. 21
Changer Operation (Optional)
Controlling Changer (Optional) ....................... 22
Multi-Changer Selection .................................. 22
Music Sensor (Skip) ......................................... 23
Fast Forward and Backward ............................ 23
Repeat Play ...................................................... 23
M.I.X. (Random Play) ..................................... 23
Scanning Programmes ..................................... 23
Selecting Folders (only for MP3 compatible
changer) ........................................................ 24
File/Folder Search (only for MP3 compatible
changer) ........................................................ 24
Setting the Range of MP3 File Selection
(only for MP3 compatible changer) ......................... 24
1-EN
DAB Operation (Optional)
Using DAB Receiver for the Ensemble Seek
Tuning (Optional) ......................................... 25
Changing the Service ....................................... 25
Changing the Service Component ................... 25
Memorizing the Service ................................... 25
Receiving the Memorized Service ................... 26
Memorizing the Ensemble Automatically ....... 26
PTY (Programme Type) Tuning ...................... 26
Turning ON/OFF Traffic News
Announcement .............................................. 27
Setting the Announcement Select Mode .......... 27
Changing the Display Mode ............................ 27
Receiving Announcement Information of DAB
Local Stations ............................................... 28
Setting for Automatic Change from DAB
to RDS ......................................................... 28
Setting ON/OFF for DRC (Dynamic Range
Control) ............................................................ 28
MobileHubTM Link Operation (Optional)
About MobileHubTM Link (Optional) ............... 29
Telephone Mode On and Off ........................... 29
Incoming Calls ................................................. 30
Calling
Calling by using the Speed Dial ................... 30
Calling by the phone book ............................ 30
Calling by the outgoing/incoming/absent
incoming history ......................................... 30
Dial call (only for operation on optional remote
control) ........................................................... 31
SMS (Short Message Service) Operation ........ 31
Remote Control Operation
Operation on Remote Control
RUE-4191 (Optional) ................................... 32
Operation on Remote Control
RUE-4135 (Optional) ................................... 33
Information
In Case of Difficulty ........................................ 34
Specifications ................................................... 36
Installation and Connections
Warning ............................................................ 37
Caution ............................................................. 37
Precautions ....................................................... 37
Installation ....................................................... 38
Connection ....................................................... 40
2-EN
WARNING
WARNING
CAUTION
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
Failure to do so may result in an accident.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
PRECAUTIONS
Temperature
Doing so may result in an accident, fire or electric shock.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Moisture Condensation
DO NOT DISASSEMBLE OR ALTER.
Use for other than its designed application may result in fire,
electric shock or other injury.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Damaged Disc
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Maintenance
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Installation Location
Make sure the INA-N333R will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Handling the Detachable Front Panel
•
•
Do not expose to rain or water.
Do not drop or apply shock.
3-EN
Never Attempt the Following
Correct Handling
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Your player will automatically eject any disc that is inserted
incorrectly. If the player continues to eject a correctly inserted
disc, push the RESET switch with a pointed object such as a
ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
New Discs
As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player
and ejected after initial loading, using your finger, feel around the
inside of the centre hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub the inside edge of
the hole and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Centre
Hole
Centre
Hole
New
Disc
Bumps
Outside
(Bumps)
CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the centre of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
Use only Alpine's exclusive Navigation Disc (not supplied)
with this unit. You cannot use any other navigation discs.
You also cannot play DVD/VIDEO CDs on this unit.
For operation of the navigation system, see the owner’s
manual for the navigation disc.
4-EN
Basic Operation
• Controllable with Remote Control
Remote control sensor
SOURCE/
POWER
RESET
Detaching the Front Panel
1
2
3
Press and hold the SOURCE/POWER button at least 2
seconds to turn off the power.
Press the
(Release) button at left side until the
front panel pops out.
Grasp the left side of the front panel and pull it out.
• Compatibility with Factory Steering Wheel Radio
Controls
If your vehicle has steering wheel controls for the radio,
an optional steering wheel control interface may be
available to connect your Alpine radio. For details,
contact your Alpine dealer.
Initial System Start-Up
Immediately after installing or applying power to the unit, it
should be initialized. Press the RESET switch with a
ballpoint pen or any other pointed object.
NOTES
• The front panel may become hot in normal usage (especially
the connector terminals on the back of the front panel), this is
not malfunction.
• To protect the front panel, place it in the supplied carrying
case.
About Demonstration
This unit is equipped with a Demonstration function.
Soon after resetting the unit or after turning the unit on
the first time, the demonstration starts automatically.
To cancel the demonstration, refer to "Demonstration"
on page 21.
Attaching the Front Panel
Turning Power On and Off
1
1
2
First, insert the right side of the front panel into the
main unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks firmly
into the main unit.
2
1
Press the SOURCE/POWER button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button except
the eject button and TILT
button.
The volume level gradually increases to the previous level
you were listening to before the unit was turned off. Press
and hold the SOURCE/POWER button for at least 2
seconds to turn off the unit.
NOTE
The very first time the power is turned on, the volume will start
from level 0.
NOTE
Before attaching the front panel, make sure that there is no dirt
or dust on the connector terminals and no foreign object
between the front panel and the main unit.
5-EN
Basic Operation
NOTES
NAV.
• If the MODE (Audio Control) knob is not rotated within 5
seconds after selecting the BALANCE, or FADER mode, the
unit automatically returns to the VOLUME mode.
•* When the NAVI MIX (page 20), subwoofer (page 19) is ON,
respective levels may be adjusted.
MODE
2
Turn the MODE (Audio Control) knob until the desired
sound is obtained in each mode.
NOTE
When the temperature inside the unit rises, the volume may
decrease momentarily. This is not a malfunction.
TILT
Automatic Position Display
1
Display Angle Adjustment
Press the NAV. button to change the display. Automatic
position (present position) and the GPS receiving
sensitivity are displayed.
Example of vehicle’s present position
Movable display
The movable display may be adjusted to 3 different
angles depending upon user preference.
1
Press the TILT
movable display.
The GPS receiving sensitivity and the
number of satellites are displayed.
button to adjust the angle of the
NOTES
• The display will close a half minute after the ignition key is
turned to the OFF position.
• The adjusted angle of the display is stored in memory. There
is no need to re-adjust the angle when the power is turned
back on.
CAUTION
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Adjusting Volume/Balance (Between
Left and Right)/Fader (Between Front
and Rear)
1
Press the MODE (Audio Control) knob repeatedly to
choose the desired mode.
Each press changes the modes as follows:
Vol.
MIX*
SUBW.*
Volume: 0 ~ 35
Balance: L15 ~ R15
Fader: F15 ~ R15
Subwoofer: 0 ~ 15
Mix level: 0 ~ 15
6-EN
BAL.
FAD.
Vol.
NOTES
• To display the present position of your vehicle, connect the
GPS antenna to the unit. (Refer to “Installing the GPS
Antenna” on page 39.).
• When inserting the separately sold navigation disk (NVDT003) specialized for this unit, navigating operations from the
unit become available. MENU, VOICE and TMC button are
used for navigating operations.
Radio Operation
Listening to Radio
1
TUNE/A.ME
SOURCE/
POWER
BAND/TEL. OK MODE
Flipper switch
2
Press the SOURCE/POWER button until a radio
frequency appears in the display.
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
FM-1
3
F/SETUP Preset buttons (1 through 6)
FM-2
FM-3
MW
LW
FM-1
Press the TUNE/A.ME button to select the tuning mode.
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
NOTE
The initial mode is DX SEEK.
Switching the Tuner Mode
Distance mode:
Both strong and weak stations will be automatically
tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in
(Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual
tuning).
The INA-N333R incorporates the MAX TUNE Pro for the
highest quality tuner audio. Moreover, you can choose
between two settings to suit your own personal sound
preferences usage.
1
2
3
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
4
Move the Flipper switch up or down to select FM
CONDITION. Press the OK button or MODE knob to
set.
NOTES
• The STEREO indicator appears on the display when a Stereo
FM station is tuned in.
• About TMC Broadcast Indicator
The TMC indicator, which is displayed in the audio mode, is
displayed when a TMC reception station is included in the
selected broadcast station. The TMC information cannot be
obtained.
The TMC indicator, which is displayed in the navigation mode
(when optional NVD-T003 is used), is displayed when the
conditions for obtaining the TMC information have been
satisfied.
The optional navigation disc (NVD-T003) is required in order
to obtain the TMC information.
Please see the instruction manual of the navigation disc for
details.
Move the Flipper switch up or down to select your
preference. Press the OK button or MODE knob to set.
The display returns to the SETUP screen.
HI-FI: Sound quality priority setting
NORMAL: Standard setting
STABLE: Noiseless priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the tuner
in the HI-FI mode, we recommend you change to the
NORMAL mode.
4
Press the
or
button to tune in the desired
station.
Holding down the
or
button will change the
frequency continuously.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Manual Storing of Station Presets
1
2
3
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold the Preset button (1 through 6) that
you want to store the station on for at least 2 seconds.
The selected station is stored.
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM-1, FM-2, FM-3,
MW and LW).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
7-EN
Radio Operation
Station Title Search Function
TUNE/A.ME
SOURCE/
POWER
BAND/TEL. OK MODE
Flipper switch
If titles for radio stations (radio frequency) are entered,
you can search for a radio station from its title.
1
2
Preset buttons (1 through 6)
3
Press and hold the MODE knob for at least 2 seconds.
The display changes to the station title search mode.
Move the Flipper switch up, down or press the
button to select the station title.
,
Press the OK button or MODE knob.
The radio station with the selected title is received.
NOTES
Automatic Memory of Station Presets
1
2
3
Press the SOURCE/POWER button to select the radio
mode.
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
Press and hold the TUNE/A. ME button for at least 2
seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons
Preset 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.
Tuning to Preset Stations
1
2
3
Press the SOURCE/POWER button to select the radio
mode.
Press the BAND/TEL. button repeatedly until the
desired band is displayed.
Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number and
frequency of the station selected.
8-EN
• Press the RTN button or press and hold the MODE knob for
at least 2 seconds to cancel the search mode.
• Pressing the
button will permit reception of the
broadcast station of the selected title, the same as with the OK
button or the MODE knob.
RDS Operation
Recalling Preset RDS Stations
1
SOURCE/
POWER
OK MODE
Flipper switch
2
3
F/SETUP 1/AF
1 through 6 buttons
Setting RDS Reception Mode and
Receiving RDS Stations
4
5
The RDS (Radio Data System) is a radio information
system using the 57 kHz subcarrier of regular FM
broadcast. The RDS allows you to receive a variety of
information such as traffic information, station names,
and to automatically re-tune to a stronger transmitter
that is broadcasting the same programme.
1
2
3
4
5
6
button to tune in the desired
Press the 1/AF button to deactivate the RDS mode.
The "AF" indicator will turn off.
Press the F/SETUP button to activate the normal
mode. The "FUNC" indicator will turn off.
PI
PS
AF
TP
TA
PTY
EON
R.TEXT
Programme Identification
Programme Service Name
List of Alternative Frequencies
Traffic Programme
Traffic Announcement
Programme Type
Enhanced Other Networks
Radio Text Information
Press the 1 through 6 buttons in which your desired
RDS station is preset. If the preset station's signal is
weak, the unit automatically searches and tunes to a
stronger station in the AF (Alternative Frequencies) list.
If the preset station and the stations in the AF list
cannot be received:
NOTE
For presetting the RDS stations, refer to the Radio Operation
section. The RDS stations can be preset in the FM-1, FM-2 and
FM-3 bands only.
Receiving RDS Regional (Local)
Stations
1
2
3
Tips
• When the unit receives the PTY31 (Emergency Broadcast)
signal, the unit will show "ALARM" in the display
automatically.
• The RDS digital data includes the followings:
Press the F/SETUP button to activate the normal
mode. The "FUNC" indicator will turn off.
If the signal level of the Regional (Local) station being
tuned becomes too weak to receive, press the same
preset button to tune in a Regional station in other
district.
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
Press the
or
RDS station.
Press the 1/AF button to activate the RDS mode.
The display shows the "AF" indicator when the RDS
mode is activated.
When the PI SEEK setting is on (refer to "PI SEEK
Setting" on page 10), the unit searches again for a
station in the PI (Programme Identification) list.
Press the SOURCE/POWER button until a radio
frequency appears in the display.
Press the 1/AF button to activate the RDS mode.
The display shows the "AF" indicator when the RDS
mode is activated.
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
4
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select RDS
REGIONAL. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
In the "RDS REGIONAL OFF" mode, the unit
automatically keeps receiving the related local RDS
station.
Press the F/SETUP button to deactivate the setting
mode.
9-EN
RDS Operation
PTY (Programme Type) Tuning
OK MODE
Flipper switch
1
2
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
Press the 2/PTY button to activate the PTY mode, in
the FM radio mode. The Programme Type of the station
being currently received will be displayed for 5
seconds.
If there is no receivable PTY broadcast, "NO PTY" will
be displayed for 5 seconds.
TITLE
T.INFO/ANNC.
2/PTY
3/P. PTY
PI SEEK Setting
1
2
3
4
2
If no buttons are pressed within 5 seconds after pressing the 2/
PTY button, the PTY mode will be automatically cancelled.
3
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select PI
SEEK. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Press the T.INFO/ANNC. button to activate the Traffic
Information mode.
To cancel the Traffic information mode, press the
T.INFO/ANNC. button again.
Press the
or
button to select your desired
traffic information station. When a traffic information
station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "T.INFO".
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode for 70
seconds. If the signal remains below a certain level for over
70 seconds, the "T.INFO" indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press the T.INFO/ANNC. button to skip that
traffic information message. The T.INFO mode will remain in
the ON position to receive the next traffic information
message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.
10-EN
Press the
and
buttons or move the Flipper
switch up or down within 5 seconds after activating the
PTY mode to choose the desired programme type
while the PTY (programme type) is being displayed.
Each press scrolls the programme type by one.
Light M
4
Press the F/SETUP button again to return to normal
operation.
Receiving Traffic Information
1
NOTE
F/SETUP
Classics
Other M
Press the 2/PTY button within 5 seconds after
selecting the programme type to start searching for a
station in the selected programme type.
If the received station is found, the programme type of
the received station will be displayed for 5 seconds.
If no station is found, "NO PTY" will be displayed for 2
seconds.
5
Press the F/SETUP button to activate the normal
mode. The "FUNC" indicator will turn off.
NOTES
• Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
• When the Navigation disc (sold separately) is inserted and the
system is set in navigation mode, the selected language can be
used with the PTY (Programme Type) or P.PTY (Priority
Programme Type) language.
NOTE
Receiving Traffic Information While
Playing CD or Radio
1
2
Press the T.INFO/ANNC. button repeatedly until the
T.INFO indicator appears in the display.
If no buttons are pressed within 5 seconds after pressing the 3/P.
PTY button, the PRIORITY PTY mode is automatically cancelled.
3
Press the
and
buttons to select a traffic
information station if necessary.
• When a traffic information broadcast starts, the unit
automatically mutes the CD player or the regular FM
broadcast.
• When the traffic information broadcast finishes, the
unit automatically returns to the original source play
before the traffic information broadcast began.
• When traffic information stations cannot be
received:
In the tuner mode:
When the TP signal can no longer be received for
over 70 seconds, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received,
the traffic information station of another frequency
will be selected automatically.
4
3
Press the T.INFO/ANNC. button to deactivate the
Traffic Information mode. The T.INFO indicator
disappears.
Press the 3/P. PTY button to activate the PRIORITY
PTY mode again.
• To change the programme category, perform the
step 3.
• To disable the PRIORITY PTY function, press and
hold the 3/P. PTY button for at least 2 seconds.
NOTE
In the PRIORITY PTY function, unlike in the T.INFO function,
the volume does not increase during operation.
5
Press the F/SETUP button to activate the normal
mode. The "FUNC" indicator will turn off.
NOTE
Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternative frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If the
station being received does not broadcast the traffic information,
the receiver automatically tunes in the related station that
broadcasts the traffic information when it occurs.
Press the
or
button or move the Flipper
switch up or down within 5 seconds while "News" is
being displayed to choose a desired programme type.
Then press 3/P. PTY button. The PRIORITY PTY
function will activate.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Press the TITLE button while receiving FM in the radio
mode to select the Radio Text display.
PS (Programme Service Name)
PS
Radio Text
*Station name
NOTE
The unit automatically switches to a traffic information
announcement even if you are listening to a source other than
the radio or CD.
Priority PTY (Programme Type)
This function allows presetting of a programme type
such as music category, news, etc. You can listen to a
programme in the preset programme type as the unit
automatically gives priority to the preset programme
type when it begins broadcasting, and interrupts the
programme you are currently listening. This feature is
functional when your unit is set to a mode other than the
LW and MW.
1
2
∗ If titles for radio stations are entered, you can
search for a radio station from its title.
"Station Title Search Function" (See page 8)
The display shows "Waiting" for a few seconds.
NOTES
• If there is no receivable text message or the unit cannot
receive a text message properly, the display shows "NO
TEXT".
• Depending on the signal reception conditions, “Waiting” may
be displayed.
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
Press the 3/P. PTY button to activate the PRIORITY
PTY mode.
The programme type will be displayed for 5 seconds.
The initial setting is "News."
11-EN
CD Player Operation
2
SOURCE/
POWER
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The
movable display will close and playback will begin.
When a disc is already inserted, press the SOURCE/
POWER button to switch to the CD mode.
The mode will change every time the button is pressed.
→ TUNER
→ CD
→ CD CHANGER∗
(∗ Only when the CD changer is connected)
3
4(
)
5(
6(
)
)
4
To pause playback, press the
button.
Pressing the
button again will resume playback.
To eject the disc, press the
button.
NOTES
MP3 can be played back if an MP3 compatible CD
changer is connected. (Refer to “Changer operation” on
page 22)
Opening and Closing the Movable
Display
1
Press the button.
The movable display will open.
On handling Compact Discs (CD/CD-R/CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels and do not write on the
surface.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a
long time. Never expose the disc to direct sunlight.
Heat and humidity may damage the CD and you may
not be able to play it again.
(Movable display fully opened)
To close the movable display, press the
The movable display will close.
• If the CD does not eject, press button again for at least 2
seconds with the movable display open.
• In CD mode, if the navigation disc (sold separately) is loaded,
“NAV. DISC” is displayed.
button again.
NOTES
• Do not apply shock to the movable display when it is open as
it may result in malfunction of the unit.
• The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the
last recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt
playback again.
About discs that can be used with the INAN333R models.
Use only compact discs with the label side showing the CD
logo marks below.
Playback
1
Press the button.
The movable display will open.
Insert a disc with the label side facing up.
12-EN
You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) for audio use on this unit. You can not play
CD-Rs/CD-RWs containing MP3 formatted audio files.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable
conditions, CDs not designed for audio use, CDs on
which a recording failed or a re-recording was
attempted.
Music Sensor (Skip)
1
Momentarily press the
button once during CD play
to return to the beginning of the current track. If you
wish to access the beginning of a track further back,
repeatedly press until you reach the desired track.
Press the
button once to advance to the beginning
of the next track. If you wish to access the beginning of
a track further ahead, press repeatedly until the
desired track is reached.
NOTE
The music sensor feature is functional in the play or pause mode.
Fast Forward and Backward
1
Press and hold the
or
button to quickly move
backward or forward until you reach the desired section
of the track.
Repeat Play
1
Press the 5 (
) button to play back repeatedly the
track being played.
The REPEAT indicator will illuminate and the track will
be played repeatedly.
Press the 5 (
) button again and select OFF to
deactivate the repeat play.
M.I.X. (Random Play)
1
Press the 4 (
) button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks on the
disc will be played back in a random sequence. After all
the tracks on the disc have been played back once, the
player will begin a new random sequence play until the
M.I.X. mode is cancelled.
To cancel M.I.X. play, press the 4 (
turn off the M.I.X.
) button again to
Scanning Programmes
1
Press the 6 (
) button to activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the 6 (
deactivate the Scan mode.
) button and
13-EN
Other Functions
MP3 mode (When MP3 compatible changer is
connected):
OK MODE
Flipper switch
ID3 TAG DISPLAY*2
FOLDER/FRAME*3 DISPLAY
FILE/FRAME*3 DISPLAY
TITLE DISPLAY*4
TITLE
∗1
Displaying the Title/Text
∗2
It is possible to display the CD/Station title if the title has
been previously inputted. For details, see “Titling Discs/
Stations” (page 15). Text information, such as the disc
name and the track name, will be displayed if playing a
CD text compatible disc. If a MP3 compatible CD changer
is connected, it is also possible to display the folder
name, the file name, and the ID3 tag, etc. while playing
MP3 files.
1
Press the TITLE button.
The mode will change every time the button is pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD name
(see page 15). This inputted name is referred to as
a "title."
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as "text."
Radio mode:
PS (Programme Service Name)
Station Name (TITLE DISPLAY)*4
RADIO TEXT DISPLAY
CD/Changer mode:
TEXT DISPLAY (TRACK/DISC NAME)*1
TITLE DISPLAY*4
14-EN
∗3
∗4
Displayed during playback of a disc with CD Text.
Nothing will be displayed when the CD contains no
text data.
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed (e.g., track name,
artist name, and album name).
All other tag data is ignored.
The recording sampling rate and bit rate of the MP3
file are displayed.
Nothing will be displayed when the title has not
been inputted.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The display may not show all the information of the CD Text
depending on the CD changer.
• When the Scroll Setting (refer to page 19) is set to "OFF",
press and hold the TITLE button for at least 2 seconds to
scroll the Text information only once (TEXT DISPLAY,
FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG
DISPLAY mode.)
• “NO SUPPORT” is displayed when the desired text
information cannot be displayed on this unit.
Titling Discs/Stations
Erasing Disc Title/Station Title
1
1
2
3
4
Press the TITLE button and select the title display
mode.
For details, see “Displaying the Title/Text” (see page
14).
Press the TITLE button for at least 2 seconds to
change to the Title Input mode.
Letter symbols appear on the display. Move the Flipper
switch up or down within 10 seconds to transfer the
cursor to the letter symbol you want to input. Press the
OK button or MODE knob to set the letter.
Repeat the Procedure 3. Up to 8 digits can be input.
The input title is memorized automatically and
displayed as title.
When inputting less than 8 digits, select OK in the
letter symbols shown on the display. The letters will be
memorized automatically and displayed as title. Even if
OK is not selected, the letters will be memorized
automatically after 10 seconds.
NOTES
• In step 3 and 4, if you do not operate for at least 10 seconds,
the Title Inputting mode will be canceled.
• You can also cancel the Title Inputting mode by pressing the
RTN button.
• You cannot give titles to tracks.
• You can enter 24 station titles for the radio frequency and 18
disc titles on this unit. If you try to store beyond the limit, the
display will show "FULL DATA" for 2 seconds. At this point,
no more titles can be stored.
• To input a new title, one of the previously inputted titles must
first be deleted.
" symbol into
• When you want to erase a title, enter the "
all spaces.
• When you select
or
, the cursor indicating the input
title moves right or left.
, you can insert the space.
• When selecting
• When you select 1 or 2 , the character/symbol pattern
display changes alternately.
• The CD Changer title length or memory capacity varies
depending upon the model being used.
• Removing power from the unit may delete these titles. Use
caution when manipulating the power cord.
or
button instead of the
• You can also press the
Flipper switch to select a text to enter.
• You can also press the
button instead of the OK button or
MODE knob to set a text.
Press the TITLE button to select the Title Display.
Then, press again and hold for at least 2 seconds.
• For details, see “Displaying the Title/Text” (page 14).
2
3
4
5
6
Press and hold the OK or
button or MODE knob
for at least 2 seconds.
The title in the display will blink and “SEARCHING
TITLE” will be displayed.
Move the Flipper switch up or down until the title you
want to erase is displayed.
Press the OK or
button or MODE knob. The
message “DELETE OK?” is displayed.
Press the OK or
The title is deleted.
button or MODE knob again.
Press the TITLE button to cancel the title erasing
mode.
NOTES
• You cannot erase CD-TEXT.
• “NO DATA” is displayed for 2 seconds if the title is not input
in step 2, or if the all title is erased in step 5.
or
button instead of the
• You can also press the
Flipper switch to select a title.
15-EN
Sound Setup Operation
Turning Defeat Mode On/Off
OK MODE
Flipper switch
By setting Defeat ON, all previously adjusted in the bass
engine mode (except subwoofer mode) settings will
return to the factory defaults.
1
Press the DEFEAT button for more than 2 seconds to
turn Defeat on.
To cancel Defeat, press the DEFEAT button again for
more than 2 seconds.
bass engine/
DEFEAT
Switching the Phase of the
Subwoofer Output
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency
emphasis at low listening levels. This compensates for
the ear's decreased sensitivity to bass and treble sound.
1
2
3
4
5
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select LOUD.
Press the OK button or MODE knob to set the LOUD
mode.
You can switch the phase of the subwoofer output to
NORMAL 0° or REVERSE 180°. To select the desired
phase:
1
2
3
Press the OK button or MODE knob again.
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the LOUD mode.
When the setting is completed, press the bass engine
button to return to the normal mode.
NOTES
• If no button is pressed within 10 seconds, the Loudness
setting will be turned off automatically.
• After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. If the RTN button
is pressed, the display returns to the previous setting indication.
• You can also press the
or
button instead of the
Flipper switch to select an item.
• You can also press the
button instead of the OK button or
MODE knob to set an item.
16-EN
4
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select SUBW.
Press the OK button or MODE knob to set the SUBW.
mode.
Press the OK button or MODE knob to change to the
SUBW. PHASE setting display.
Move the Flipper switch up or down to select 0°
(NORMAL) or 180° (REVERSE). Press the OK button
or MODE knob to set.
NOTES
• If no button is pressed within 10 seconds, the Phase of the
Subwoofer Output setting will be turned off automatically.
• After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. If the RTN button
is pressed, the display returns to the previous setting
indication.
Setting the Bass Control
You can change the Bass Frequency emphasis to create
your own tonal preference.
1
2
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select BASS
CONT. Press the OK button or MODE knob to set the
BASS CONT. (Bass Center frequency control) mode.
3-1 Setting the bass Level:
Move the Flipper switch up or down to select BASS
LEVEL. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired bass level (–7~+7). Press the OK button or
MODE knob to set.
You can emphasize or weaken the bass frequency.
3-2 Setting the bass Centre frequency:
Move the Flipper switch up or down to select BASS
FREQ. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired bass centre frequency (60Hz ~ 180Hz). Press
the OK button or MODE knob to set.
Emphasizes the displayed Bass frequency ranges.
3-3 Setting the bass Band Width (Q-Factor):
Move the Flipper switch up or down to select BAND
WIDTH. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired bass Band Width (WIDE1 (Narrow) ~ WIDE4
(Wide)). Press the OK button or MODE knob to set.
Changes the bass boost band width to narrow or wide. A
wide setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
NOTES
• If no buttons are pressed within 10 seconds, the Bass control
setting will be turned off automatically.
• After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous indication.
or
button instead of the
• You can also press the
Flipper switch to select an item.
• You can also press the
button instead of the OK button or
MODE knob to set an item.
• The bass level settings will be individually memorized for
each source (FM, MW (LW), CD, etc.) until the setting is
changed. The bass frequency and bass band width settings
adjusted for one source are effective for all other sources
(FM, MW (LW), CD etc.).
• Depending on the connected devices, some functions and
display indications do not work. However, bass level is still
adjustable if an audio processor with the bass adjustment is
connected.
Setting the Treble Control
You can change the Treble Frequency emphasis to
create your own tonal preference.
1
2
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select TREBLE
CONT. Press the OK button or MODE knob to set the
TREBLE CONT. (Treble Center frequency control)
mode.
3-1 Setting the treble Level:
Move the Flipper switch up or down to select TREBLE
LEVEL. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired Treble level (–7~+7). Press the OK button or
MODE knob to set.
You can emphasize the treble frequency.
3-2 Setting the treble Centre frequency:
Move the Flipper switch up or down to select TREBLE
FREQ. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired treble centre frequency (10.0kHz ~ 17.5kHz).
Press the OK button or MODE knob to set.
Emphasizes the displayed Treble frequency ranges.
NOTES
• If no buttons are pressed within 10 seconds, the Treble control
setting will be turned off automatically.
• After 10 seconds from the operation is completed, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous setting
indication.
or
button instead of the
• You can also press the
Flipper switch to select an item.
• You can also press the
button instead of the OK button or
MODE knob to set an item.
• The treble level settings will be individually memorized for
each source (FM, MW (LW), CD, etc.) until the setting is
changed. The Treble frequency settings adjusted for one
source are effective for all other sources (FM, MW (LW), CD,
etc.).
• Depending on the connected devices, some functions and
display indications do not work. However, treble level is still
adjustable if an audio processor with the treble adjustment is
connected.
17-EN
SETUP Operation
Sound (Beep) Guide Function
OK
MODE
Flipper switch
This function will give audible feedback with varying
tones depending upon the button pressed.
1
2
RTN
F/SETUP
3
Changing Backlighting Colour
1
2
3
Move the Flipper switch up or down to select BEEP.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select OFF or
set your preferred volume. The volume can be set one
of the three steps: LOW, MID, and HIGH. Press the OK
button or MODE knob to set. The display returns to the
SETUP screen.
NOTES
• The initial setting at the factory is BEEP OFF.
• When an external audio processor is connected, the beep tone
does not function although the BEEP setting is set to on.
• The beep tone will be output from the front speakers only.
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select
ILLUMINATION. Press the OK button or MODE knob to
set.
4
Move the Flipper switch up or down and to select
GREEN or AMBER. Press the OK button or MODE
knob to set. The display returns to the SETUP screen.
Displaying Time
NOTE
If you continue to press the Flipper switch to up or down, the
cursor position moves continuously.
4
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
1
2
3
NOTES
• You can also press the
or
button instead of the
Flipper switch to select an item.
• You can also press the
button instead of the OK button or
MODE knob to set an item.
• “Switching the Tuner Mode” in the SETUP items is described
in the Radio Operation on page 7.
• “Receiving RDS Regional (Local) Stations” and “PI SEEK
Setting” in the SETUP items are described in the RDS
Operation on page 9 and 10.
• “Receiving Announcement Information of DAB Local
Station”, “Setting for Automatic Change from DAB to RDS”
and “Setting ON/OFF for DRC” in the SETUP items are
described in the DAB Operation on page 28.
The setting can be operated only when the optional DAB
receiver Box is connected.
• “Setting the Range of MP3 File Selection” in the SETUP
items is described in the Changer Operation on page 24.
The setting can be operated only when the optional changer
compatible with MP3 is connected.
• “Switching the incoming calls of the telephone” in the SETUP
items is described in the MobileHubTM Link Operation on
page 30.
The setting can be operated only when the optional portable
telephone and the Mobile Hub are connected.
18-EN
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select CLOCK
DISPLAY. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to change the
clock display ON or OFF. Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Setting Time
Subwoofer On and Off
1
1
2
3
4
5
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select CLOCK
ADJUST. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select HOUR.
Press the OK button or MODE knob to set. Move the
Flipper switch up or down again to set the "Hour".
After adjustment, press the RTN button to return to the
previous indication.
Move the Flipper switch up or down to select
MINUTE. Press the OK button or MODE knob to set.
Move the Flipper switch up or down again to set the
"Minute".
After adjustment, press the RTN button to return to the
previous indication.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Setting the Clock Auto Adjustment
If this is set to ON, the clock display calculated from the
GPS information is available.
1
2
3
4
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select AUTO
GPS CLOCK. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
2
3
4
5
6
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select
SUBWOOFER. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Press the F/SETUP button after setting the
SUBWOOFER ON.
Press the MODE (Audio Control) knob repeatedly to
select the SUBWOOFER mode.
SUBW.
BAL.
Vol.
FAD.
Turn the MODE (Audio Control) knob until the desired
sound is obtained in each mode.
Scroll Setting
When the display of text characters etc., does not fit on
the display, it is scrolled.
When the display of text characters fit on the display, it is
not scrolled even if the Scroll ON/OFF setting is
performed.
1
2
3
NOTES
• Only minute and second are adjusted automatically.
• Set the Clock Auto Adjustment to OFF, when not connecting
to GPS antenna.
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select AUTO
SCROLL. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
• ON:
the display of CD text, etc., is scrolled
continuously.
• OFF: the display is scrolled only when a disc is
loaded or when a track is changed, etc.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTES
• Initial mode is "OFF".
• The disc titles input manually (refer to page 15) cannot be
scrolled.
19-EN
SETUP Operation
Auto Volume Setting
SOURCE/
POWER
OK MODE
Flipper switch
This is a function that changes the Volume, Bass value
according to the car speed pulse for the compensation
of hearing by noise. The desirable compensation
amount can be selected from 6 patterns.
1
2
F/SETUP
3
Navigation Interruption and Adjusting
its Volume (NAVI MIX)
When the voice guidance of the navigation system
starts, the volume level of any currently playing audio
source is reduced automatically.
You can also adjust the volume level of voice guidance.
1
2
3
4
5
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select NAVI
MIX. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Press the MODE (Audio Control) knob repeatedly to
select the NAVI MIX mode.
BAL.
FAD.
Vol.
MIX
Turn the MODE (Audio Control) knob until the desired
sound is obtained in each mode.
NOTES
• When the voice guidance of the Navigation system starts to
interrupt the audio the display is automatically changed to the
navigation screen.
• The audio volume during the navigation guide can be set by
adjusting the audio volume while the navigation guide
continues. When the navigation guide finishes, the previous
audio volume and the previous screen are restored. For
exception, if the navigation cuts in when the audio volume is
lower than the setting level, the audio volume during the
navigation guide is reset the current listening volume. (When
the navigation guide cuts in, the audio volume does not
increase.)
• The voice guidance will be output from the front speakers
only.
• When connecting the external audio processor to the unit,
ensure the output of the voice guidance by connecting the
external speaker (KAX-551N).
20-EN
Move the Flipper switch up or down to select AUTO
VOLUME. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select your
preferred Volume pattern (VOL 1: small compensation
to VOL 6: large compensation. Set VOL. to OFF when
the function is not used.) Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) or Versatile
Link Terminal (KCA-410C) to this component.
1
2
Press the F/SETUP button after setting the NAVI MIX
ON.
MIX
6
4
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
3
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select
AUXILIARY INPUT. Press the OK button or MODE
knob to set.
Move the Flipper switch up or down to select your
preferred auxiliary mode.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
OFF:
You cannot select an external input sound source.
ON:
You can select an external input sound source. You can
also select an AUXILIARY LABEL for external input∗.
∗ 1. Move the Flipper switch up or down to select the
AUXILIARY LABEL on the SETUP display. Press
the OK button or MODE knob to set.
2. Move the Flipper switch up or down to select your
preferred name from AUX, GAME, VCR, TV and
MP3. Press the OK button or MODE knob to set.
AUXILIARY LABEL
You can select and set a name of external input when
Versatile Link Terminal (KCA-410C) is not connected.
AUX-1 LABEL / AUX-2 LABEL
You can select an AUXILIARY LABEL when Versatile
Link Terminal (KCA-410C) is connected.
NOTE
When connecting the Versatile Link Terminal (KCA-410C), you
can set two AUX mode displays.
4
5
When the setting is completed, press the F/SETUP
button to return to the normal mode.
To adjust the volume, etc., first press the SOURCE/
POWER button and select the AUX mode, then make
the necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press the BAND/
TEL. button on the unit.
Turning Mute Mode On/Off
Demonstration
This unit has the Demonstration feature which simulates
the display functions on the display panel.
1
2
3
If a device having the interrupt feature is connected,
audio will be automatically muted whenever the interrupt
signal is received from the device. This function can be
turned ON or OFF from the head unit by following
procedure below.
1
2
3
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select MUTE.
Press the OK button or MODE knob to set.
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select DEMO.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
If no buttons are pressed 30 seconds after the DEMO
mode is turned ON, the DEMO mode then begins.
NOTES
• The initial setting at the factory is "DEMO ON".
• The demonstration operation will repeat automatically until
the DEMO mode is changed to OFF.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
NOTE
The initial setting at the factory is "MUTE ON."
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTE
When Mute is set to OFF, if an external interruption (e.g.,
vehicle phone) happens, the display shows “INT.”.
When Mute is set to ON, the display shows “MUTE”.
Adjusting Source Signal Level
If the difference in volume level between the CD player
and FM radio is too great, adjust the FM signal level as
follows.
1
2
3
4
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select FM
LEVEL.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select HIGH or
LOW. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
21-EN
Changer Operation (optional)
SOURCE/
POWER
BAND
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is
the same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press the F/SETUP button.
This changes the "D" indicator to "d". Then press the
desired Preset button. With the F/SETUP button
activated, the Preset buttons 1 to 6 will represent discs
7 to 12 respectively.
Disc select buttons
(1 through 6)
Multi-Changer Selection
F/SETUP
4(
)
5(
)
6(
)
Controlling Changer (Optional)
An optional 6-disc (including MP3 compatible changer)
or 12-disc CD Changer may be connected to the INAN333R if it is Ai-NET compatible. With a CD Changer
connected to the Ai-NET input of the INA-N333R, the
CD Changer will be controllable from the INA-N333R.
Using the KCA-400C (the Multi-Changer Switching
device) or KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the INA-N333R.
See the Multi-Changer Selection section on this page for
selecting the CD Changers.
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers, the
KCA-400C (Multi-Changer Switching device) must be
used. If you use 1 Switching device, you can connect up
to 4 CD Changers. If you use 2 Switching devices, you
can connect up to 6 CD Changers. When using KCA410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
1
Alternatively, press the SOURCE button on the Remote
Control (optional) to activate the CD Changer mode.
Proceed to Step 3 below to select the desired CD
Changer.
NOTES
2
• The controls on the INA-N333R for CD Changer operation are
operative only when a CD Changer is connected.
• The DVD changer (optional) is controllable from the INAN333R as well as the CD changer.
3
1
Press the SOURCE/POWER button to activate the
CHANGER mode. The display shows the disc number
and track number.
NOTE
The source indicator varies depending on the connected source.
2
3
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer. The selected disc number appears in the
display and CD playback starts.
To pause playback, press the
button.
Pressing the
button again will resume playback.
NOTES
• After selecting the desired disc, you can operate in the same
way as for the CD player.
For details, please see the CD Operation section.
• If the "FUNC" indicator is illuminated the Disc Select buttons
become nonfunctional.
• The MP3 indicator is lit during MP3 playback.
• Press BAND to switch the Disc mode in the CD/DVD/
Changer mode.
• When an MP3 compatible CD player is connected, the unit
can play discs containing both audio data and MP3 data.
22-EN
Press the SOURCE/POWER button to activate the CD
Changer mode.
Press the BAND button on this unit or the Remote
Control (optional) to activate the CD Changer Selection
mode.
The CD Changer Selection mode remains active for 3
seconds after Step 2 is performed. Press the BAND
button on this unit or the Remote Control until the
desired CD Changer indicator appears on the display.
NOTES
• If the selected CD Changer is not connected, the display will
show "NO CHANGER."
• For further details about the external input (AUX) when using
KCA-410C, see "Setting the AUX Mode (V-Link)" on page 20.
Music Sensor (Skip)
M.I.X. (Random Play)
1
1
Momentarily press the
button once during CD play
to return to the beginning of the current track (file). If
you wish to access the beginning of a track (file) further
back, repeatedly press until you reach the desired track
(file).
2
Press the
button once to advance to the beginning
of the next track (file). If you wish to access the
beginning of a track (file) further ahead, press
repeatedly until the desired track (file) is reached.
Repeat Play
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
1
Press the 5 (
) button again and select OFF to
deactivate the repeat play.
2
*REPEAT ALL
(off)
NOTES
• *The REPEAT ALL mode is selected, the unit repeatedly plays
back all tracks (files) on the selected disc.
• If a CD changer applicable to MP3 is connected, when you
select “FOLDER” and set to REPEAT ALL in the "Setting the
Range of MP3 File Selection" section on page 24, the Files
will be repeatedly played back.
• In case a 12-disc CD changer is connected:
In changer mode, press the F/SETUP button twice to
illuminate the "FUNC" indicator and go to step 1 within 5
seconds.
) button again
Scanning Programmes
REPEAT
REPEAT
M.I.X.
•* If a CD Changer equipped with the ALL M.I.X. function is
connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback sequence.
• In case an MP3 compatible CD changer is connected:
When you select "FOLDER" and set to M.I.X. in the "Setting
the Range of MP3 File Selection" section on page 24, the
Files in the Folder are played back in random sequence. After
all the files have been played back, play does not shift to the
next Folder.
• In case a 12-disc CD changer is connected:
In changer mode, press the F/SETUP button twice to
illuminate the "FUNC" indicator and go to step 1 within 5
seconds.
Press and hold the
or
button to quickly move
backward or forward until you reach the desired section
of the track (file).
Within 5 seconds, press the 5 (
) button to play
back repeatedly the track being played.
The track (file) will be played repeatedly.
(off)
NOTES
Fast Forward and Backward
2
*ALL M.I.X.
To cancel M.I.X. play, press the 4 (
to turn off the M.I.X.
The music sensor feature is functional in the play or pause mode.
1
Within 5 seconds, press the 4 (
) button in the play
or pause mode.
The tracks (files) on the disc will be played back in a
random sequence.
M.I.X.
NOTE
1
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
Press the F/SETUP button. The "FUNC" indicator will
illuminate.
Within 5 seconds, press the 6 (
) button to activate
the Scan mode.
The first 10 seconds of each track (file) will be played
back in succession.
To stop scanning, press the 6 (
deactivate the Scan mode.
) button and
NOTES
• If a CD changer applicable to MP3 is connected:
When you select "FOLDER" in the "Setting the Range of MP3
File Selection" section on page 24, the first 10 seconds of
each File in the Folder will be played back.
• In case a 12-disc CD changer is connected:
In changer mode, press the F/SETUP button twice to
illuminate the "FUNC" indicator and go to step 1 within 5
seconds.
23-EN
Changer Operation (optional)
Setting the Range of MP3 File Selection
(only for MP3 compatible changer)
OK
MODE
Flipper switch
When an MP3 compatible CD changer is connected,
you can set the range of MP3 file selection to “entire
disc contents” or “folder contents only.”
1
F/SETUP 1 (FOLDER DN)
2
2 (FOLDER UP)
3
Selecting Folders (only for MP3
compatible changer)
4
Operation I from the main unit button:
1
Move the Flipper switch up or down to select the
folder.
Press and hold the F/SETUP button for at least 2
seconds.
Move the Flipper switch up or down to select MP3
PLAY. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to toggle the
mode between ALL and FOLDER .
• ALL : plays all the files on one disc
• FOLDER : plays files in the selected folder only.
Press the OK button or MODE knob to set.
The display returns to the SETUP screen.
NOTE
The initial setting at the factory is ALL.
Operation II from the main unit button:
1
2
5
Press the F/SETUP button so that the "FUNC"
indicator will illuminate.
Within 5 seconds, press the 1/FOLDER DN or 2/
FOLDER UP button to select the folder.
File/Folder Search (only for MP3
compatible changer)
You can locate all the files on a disc and play them.
1
2
3
4
Press and hold the MODE knob for at least 2 seconds.
The unit switches to File/Folder Search Mode.
Press and hold the
button for at least 2 seconds
to select the File search mode or Folder search mode.
Move the Flipper switch up or down or press the
to select the desired file or folder.
Press the OK button or MODE knob to execute the
setting. The selected file or folder starts to play.
NOTE
During search, press the RTN button or press and hold the
MODE knob for at least 2 seconds to cancel the Search mode.
24-EN
,
Press the F/SETUP button to set the selected mode.
DAB Operation (optional)
Tips
When you use DAB, you can select a desired ensemble which
may contain one or more services, any of which can be received.
Furthermore, each service contains a Service Component, which
itself can contain any number of Primary or Secondary services,
depending on the Service Component. Several different kinds of
service can therefore be selected.
SOURCE/
POWER BAND/TEL.
Changing the Service
Services are received within the ensemble that you are
currently receiving.
F/SETUP 4 / P/S Preset buttons
(1 through 6)
1
Using DAB Receiver for the Ensemble
Seek Tuning (Optional)
DAB (Digital Audio Broadcasting) offers excellent sound
quality even in a moving vehicle, enabling you to receive
various types of information, including weather and traffic
information, and it also displays information sent from the
broadcasting stations. You can also let urgent broadcasts
or announcements interrupt a current broadcast.
Changing the Service Component
You can change Audio Services of the Service Component
between the Primary and Secondary, when listening to an
Audio Service that has a Secondary Service Component.
NOTES
• If you connect the DAB Receiver Box TUA-T100DAB
(separately sold), you can control DAB for the reception of
broadcast.
• CD quality sound can be obtained from DAB broadcasts,
although quality may differ on some services.
• Some broadcasting stations may perform test broadcasts.
• When DAB reception is poor, metallic noise may occur. This is
not a malfunction.
1
2
3
1
2
Press the SOURCE/POWER button to select DAB.
Press the BAND/TEL. button to select DAB1, DAB2, or
DAB3.
If you press and hold the
or
button while
receiving DAB1, 2, or 3, it starts searching for ensemble
automatically.
By selecting the mode in the “Changing the Display
Mode” section (see page 27), the display shows the
status of the broadcasting stations that have been
received as follows:
Ensemble/Service Label Display: the Ensemble/
Service Label of received station is displayed.
Service/Component Label Display: the Service/
Ensemble Label is displayed for 2 seconds, and then
the display is changed to the Service Label and
Component Label after receiving the broadcasting
station.
Dynamic Label Display: the Service/Ensemble Label is
displayed for 2 seconds, and then the display is
changed to the Dynamic Label after receiving the
broadcasting station.
While receiving the ensemble, momentarily press the
or
button, and select the service that you
desire.
The selected service label is displayed for 2 seconds,
and then you return to the display that you select with
the steps described under the section “Changing the
Display Mode” (see page 27).
Press the F/SETUP button so that "FUNC" will
illuminate.
Press the 4 / P/S button to change the Service
Component between the Primary and Secondary
broadcast.
Every time you press the button the selection toggles.
The Component label is displayed for 2 seconds, and
then you return to the display that you selected with the
steps described under the section “Changing the
Display Mode” (see page 27).
NOTES
• If there exists a Secondary Service Component within a
service, the indicator “S” blinks on the display. When
receiving the Secondary Service Component, the indicator
“S” remains lit.
• When receiving the Primary Service Component, the "P"
indicator lights up.
.
Memorizing the Service
1
2
3
Select the service that you want to memorize.
Press any one of the Preset buttons (1 through 6) for
at least 2 seconds while the “FUNC” indicator is turned
off. The selected service is memorized.
To memorize more, repeat the above steps 1 and 2.
NOTES
• You can memorize up to 18 stations (6 stations for each
band; DAB1, DAB2, DAB3).
• If you select a preset button that has already memorized a
service, the new selection takes it over.
• When you are not receiving DAB, the service is not
memorized. (Memorize the service when the DAB reception
is good)
25-EN
DAB Operation (optional)
TUNE/A.ME
BAND/TEL.
By selecting the mode in the “Changing the Display
Mode” section (see page 27), the display shows the
status of the broadcasting stations that have been
received as follows:
Flipper switch
Ensemble/Service Label Display: the Ensemble/
Service Label of received station is displayed.
Service/Component Label Display: the Service/
Ensemble Label is displayed for 2 seconds, and then
the display is changed to the Service/Component Label
after receiving the broadcasting station.
TITLE F/SETUP 2/PTY Preset buttons
(1 through 6)
Dynamic Label Display: the Service/Ensemble Label is
displayed for 2 seconds, and then the display is
changed to the Dynamic Label after receiving the
broadcasting station.
T.INFO/ANNC.
Receiving the Memorized Service
1
2
Press the BAND/TEL. button to select your desired
band.
Press one of the Preset buttons (1 through 6).
The selected service is received.
By selecting the mode in the “Changing the Display
Mode” section (see page 27), the display shows the
status of the broadcasting stations that have been
received as follows:
Ensemble/Service Label Display: the Ensemble/
Service Label of received station is displayed.
Service/Component Label Display: the Service/
Component Label after receiving the broadcasting
station.
NOTE
If no ensemble is received, the one that has been received before
you perform this automatic memorization is received.
PTY (Programme Type) Tuning
1
2
3
4
Dynamic Label Display: the Service/Ensemble Label is
displayed for 2 seconds, and then the display is
changed to the Dynamic Label after receiving the
broadcasting station.
Memorizing the Ensemble Automatically
1
2
Press the BAND/TEL. button to select the band that
you want to receive.
Press and hold the TUNE/A.ME button for at least 2
seconds.
The ensemble is searched for, and six ensembles are
automatically received and memorized with the preset
buttons (1 through 6).
When memorization has completed, the Ensemble that
was memorized last is received.
26-EN
Press the 2/PTY button to go to the PTY Select mode.
Press the
or
button or move the Flipper
switch up or down to select your desired programme
type.
After selecting a programme type, and when the
"FUNC" indicator will illuminate, press the 2/PTY button
to go to the PTY Search mode.
The selected programme type is searched for.
NOTE
To cancel the PTY Search mode during the PTY search, press
the 2/PTY button.
NOTE
When you receive the Secondary Service Component, you
memorize the service, but when you call out this memorized
service, the Primary Service Component will be called out.
Press the F/SETUP button so that "FUNC" will
illuminate.
5
When the station is received, the received programme
type is displayed for 5 seconds. If no station is found,
“NO PTY” is displayed for 2 seconds. Then, the
selected programme type will be displayed for 3
seconds and the PTY mode will end.
NOTES
• Above functions can be performed only for services within an
Ensemble.
• PTY selected here is reflected to the RDS broadcast.
4
Turning ON/OFF Traffic News
Announcement
5
When you set to ON, you can automatically receive the
Traffic News.
1
• When one of the selections between "All Select" and
"Financial" is set ON, no announcement interrupts are made
if you set OFF for the "Announcement."
• If you set ON/OFF with the "All Select" selection, you can set
ON/OFF for the selections from "Traffic News" to
"Financial."
This operation can also be performed by turning the Traffic
News ON/OFF in the "Setting the Announcement Select Mode"
section on this page.
Tips
• When an urgent broadcast is received, the mode automatically
changes to the DAB mode to receive the Alarm
Announcement. If you adjust the volume level at this time,
that volume level is memorized, and that volume level is
applied the next time you receive an urgent broadcast.
• If the announcement that you select in Step 3 interrupts, the
selected announcement Label is displayed. If you adjust the
volume level at this time, that volume level is memorized, and
that volume level is applied the next time announcement
interrupts.
Setting the Announcement Select
Mode
2
3
Press the T.INFO/ANNC. button for at least 2 seconds
to turn ON the Announcement Select mode.
Press the
or
and then press the
button to select “Announcement,”
button to set it ON.
After turning ON the “Announcement,” press the
button to select your desired Announcement.
Announcement
or
To set the Announcement Select mode OFF, press the
T.INFO/ANNC. button for at least 2 seconds.
NOTES
Press the T.INFO/ANNC. button to set ON/OFF for the
Traffic News.
You can also set the RDS stations at the same time.
NOTE
1
Press the
button to set ON/OFF for the selected
Announcement.
Repeat Steps 3 and 4 to set more.
Changing the Display Mode
You can display information that is sent from broadcasting stations, such as the channel number or the
service name that you are receiving or listening.
1
While receiving DAB, press the TITLE button to
change the display mode.
All Select
Traffic News
Ensemble Label/Service Label Display
Travel News
Service Label/Component Label Display*1
Warning
Dynamic Label Display*2
News
Weather
Event
Special Event
Radio Info
Sports News
Financial
∗1: You can display this only when the broadcasting
station supplies the Service Component Label.
Otherwise, “NO COMPONENT” is displayed.
∗2: • If you set “ON” for “Scroll Setting,” the character
information that is sent from the broadcasting
station is scrolled when it displayed.
If you are set to “OFF” while displaying the
Dynamic Label and press and hold the TITLE
button for at least 2 seconds, you can scroll the
character information once.
• “NO SERVICE” is displayed when there is no
service, while “NO ENSEMBLE” is displayed
when there is no ensemble label.
• “NO TEXT” is displayed when broadcasting
stations which contain no Dynamic Label are
received.
27-EN
DAB Operation (optional)
Setting for Automatic Change from
DAB to RDS
OK
MODE
Flipper switch
When the DAB reception is poor, you can set this
selection ON to automatically change to the RDS station
(a station that can be received) within the same
broadcasting station until good reception is achieved.
You can switch this for voice only (except Service label/
Dynamic label display). The display and operation
remain as for DAB.
F/SETUP
Receiving Announcement Information
of DAB Local Stations
1
2
3
Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
Move the Flipper switch up or down to select DAB
REGIONAL.
Press the OK button or MODE knob to set.
2
3
4
Move the Flipper switch up or down to select ON or
OFF.
ON: You can automatically receive the announcement
interrupt of the regional you are currently in.
OFF: Announcement interrupt is valid for all regions.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
4
1
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTES
• You can also press the
or
button instead of the
Flipper switch to select an item.
• You can also press the
button instead of the OK button or
MODE knob to set an item.
Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
Move the Flipper switch up or down to select RDS/
DAB SW.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTE
When reception is being changed from DAB to RDS, the DAB
indicator blinks.
Setting ON/OFF for DRC (Dynamic
Range Control)
If you set this ON when receiving the sound of a wide
Dynamic Range, the DRC (Dynamic Range Control)
gain increases when the source sound is small, and the
DRC (Dynamic Range Control) gain decreases when
the source sound is large, making the Dynamic Range
narrower to give you better and more comfortable sound
even in the vehicle that produces a large noise.
1
2
3
4
Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
Move the Flipper switch up or down to select DRC.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTE
When a radio programme is set to ON, sound other than what
you previously set may be produced depending on the broadcast.
In this case, turn the programme OFF.
28-EN
MobileHubTM Link Operation (optional)
NOTES
BAND/TEL.
RTN
About MobileHub™ Link (Optional)
Connect a separately sold Junction Box and a portable
telephone (available from Nokia) to control the incoming
and outgoing calls of the portable telephone.
About Icon Indicator
Signal strength indicator: Telephone signal
strength is displayed at 4 levels.
Unread mail icon indicator: lights when there is an
unread short message.
Missed call icon indicator: lights when there is a
missed call.
CAUTION
• Even with hands-free operation, a driver can be distracted
during telephone operation or receiving a call. For the sake of
safety, drivers are requested to refrain from operating the
telephone while driving.
• For the sake of safety, operations other than incoming calls
and Speed-Dial outgoing calls cannot be used.
NOTES
• If a portable telephone is connected, its address book,
incoming and outgoing history, short message history are
downloaded to the Junction Box.
• Please refer to the instruction manual of the Junction BOX.
• When a portable telephone is not connected, “NO PHONE”
is displayed for at least 2 seconds, then the mode returns to
the original source mode.
• When the portable telephone is taken off the Junction BOX
during an incoming or outgoing call, or during a hands-free
call, the call will be treated as an ordinary one by the
portable telephone.
• When there is an incoming call while the power of INAN333R is OFF, the power of INA-N333R will turn ON
automatically for a hands-free call.
• Even if the power of the portable telephone is OFF, when
INA-N333R is set to the telephone mode, the power of the
portable telephone will be turned ON.
• Even if the ACC power of the vehicle is turned OFF (even if
the engine is stopped) during a hands-free call, the call is not
disconnected, and an ordinary call by the portable telephone
is possible.
• If there is an incoming call during operation (except an
outgoing call or talking), operation mode will end and switch
to the incoming or talking mode.
• An outgoing call from a portable telephone is also possible.
However, you cannot perform different operations at the same
time from a portable telephone and INA-N333R as
malfunction can result.
• With a Junction BOX connected, outgoing and incoming
history will also be recorded in the portable telephone.
• The telephone volume can be adjusted from the INA-N333R .
The volume you set during the call is memorized, and is
automatically applied again on the next call.
• While telephoning, defeat is set to ON. When the call has
finished, the unit returns to your previous setting.
• In a status other than telephoning, receiving incoming calls or
making a call, press the TITLE button to show the Network
Operator display for 2 seconds.
• After a call, instead of going to a talking mode, the unit
displays the message “NO NETWORK COVERAGE” or
“BUSY” for about 2 seconds and then disconnects the line.
button, OK
• Within 5 seconds after a call, press the
button or MODE knob to redial.
• During a call, you can send dial tone signals 1 to 6 using
preset buttons 1 through 6, and dial tone signals 7 to 9, 0, *
and # by pressing F/SETUP, and then preset buttons 1
through 6.
• Pressing the OK button in the navigation mode (when
optional navigation disc NVD-T003 is used) will not allow
selection of message transmissions, item definitions, or items
obtained by moving the Flipper switch.
Telephone Mode On and Off
1
Press and hold the BAND/TEL. button for at least 2
seconds.
After the Network Operator display is shown for about
2 seconds, the display changes to the Speed Dial
screen.
See relevant pages for each item.
Press and hold the BAND/TEL. button for at least 2
seconds or press the RTN button to cancel the
telephone mode.
29-EN
MobileHubTM Link Operation (optional)
3
BAND/TEL.
OK
MODE
Flipper switch
4
Press the OK button or MODE knob to place a call.
If you press and hold the Preset button selected in step
2 for at least 2 seconds, you can place the call directly.
Press and hold the BAND/TEL. button for at least 2
seconds to finish the call. Or the line is disconnected
automatically if 5 seconds elapse after the call. The
telephone mode will end and return to the original
source mode.
NOTES
RTN F/SETUP
Incoming Calls
1
2
Press the
call.
• If there is no telephone number registered to a preset button,
“ERROR” is displayed for 2 seconds when you try to place a
call.
button.
• You can also place a call by pressing the
Preset buttons
(1 through 6)
or OK button to receive an incoming
Press and hold the BAND/TEL. button for at least 2
seconds to finish a call. Or the line is disconnected
automatically if 5 seconds elapse after the call.
The telephone mode will end and return to the original
source mode.
■ Calling by the phone book
You can call up the phone book registered in the
portable telephone to call from.
1
2
NOTES
• An incoming call can be received by pressing the MODE
knob.
• When the Automatic Calling mode is on, you can talk after 3
seconds of receiving the incoming call.
• Press and hold BAND/TEL. for at least 2 seconds during an
incoming call to disconnect it.
• The incoming call can be switched to Automatic Calling or
Manual Calling.
1. Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
2. Move the Flipper switch up or down to select TEL
RECEIVE.
Press the OK button or MODE knob to set.
3. Move the Flipper switch up or down to select
AUTO or MANUAL.
Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
4. When the setting is completed, press the F/SETUP
button to return to the normal mode.
3
4
5
6
2
Press and hold the BAND/TEL. button for at least 2
seconds.
The display changes to the Speed dial screen.
Press the Preset buttons (1 through 6) to place a
call. Or press the F/SETUP button and then press the
Preset button (1 through 3). The telephone numbers
stored in 7 through 9 can be accessed.
The display changes to the Select screen.
30-EN
Move the Flipper switch up or down to select the
other party.
• To skip alphabetically to the next (or previous) set of
name, press continuously the Flipper switch up or
down.
Press the OK button or MODE knob.
The display changes to the Select screen.
Press the OK button or MODE knob again to place the
call.
Press and hold the BAND/TEL. button for at least 2
seconds to finish the call. Or the line is disconnected
automatically if 5 seconds elapse after the call. The
telephone mode will end and return to the original
source mode.
• If no item is registered, “NO MEMORY” is displayed.
or
button instead of the
• You can also press the
Flipper switch to select the other party.
button instead of the OK button
• You can also press the
or MODE knob to set an item or to place a call.
■ Calling by using the Speed Dial
1
Press the BAND/TEL. button to select the Phone Book
mode.
The Phone Book list is displayed.
NOTES
Calling
You can place a call by retrieving one of the telephone
numbers registered in No. 1 to 9 of the address book.
Press and hold BAND/TEL. button for at least 2
seconds.
The display changes to the Speed dial screen.
■ Calling by the outgoing/incoming/
absent incoming history
You can place a call to any of the last 999 calls by
outgoing/incoming/absent incoming history.
1
Press and hold BAND/TEL. button for at least 2 seconds.
The display changes to the Speed dial screen.
2
3
4
5
6
Press the BAND/TEL. button to select “DIALED”
(outgoing history), “RECEIVED” (incoming history) or
“MISSED” (incoming history).
• If no history is registered to any of the lists, NO
MEMORY is displayed.
Move the Flipper switch up or down to select the
other party.
• Press continuously the Flipper switch up or down to
change the address continuously.
• The history dial takes priority to display only when
there is a missed call.
Press the OK button or MODE knob.
The display changes to the Select screen.
Press the OK button or MODE knob again to place the call.
SMS (Short Message Service)
Operation
You can receive short messages and display the
contents.
1
2
3
4
Press and hold the BAND/TEL. button for at least 2
seconds to finish the call. Or the line is disconnected
automatically if 5 seconds elapse after the call. The
telephone mode will end and return to the original
source mode.
NOTES
• You can also press the
or
button instead of the
Flipper switch to select the other party.
button instead of the OK button
• You can also press the
or MODE knob to set an item or to place a call.
5
■ Dial call (only for operation on
optional remote control)
Input the telephone number using the dial.
<For operation on optional remote control>
Use the optional Remote Control RUE-4191 to explain.
1
2
In the TEL mode, press and hold the 0 button for at
least 2 seconds.
The Direct Dial mode will be activated.
6
Press and hold the BAND/TEL. button for at least 2
seconds.
The display changes to the Speed dial screen.
Press the BAND/TEL. button to select “SMS INBOX” .
Move the Flipper switch up or down to select the
other party.
Press the OK button or MODE knob.
The display changes to the SMS READ screen.
The contents of the received message is displayed up
to 140 letters.
• The display switches between the SMS READ
screen and the SMS INBOX screen every time the
button (OK button or MODE knob) is pressed.
• When no item is registered, “NO MEMORY” is
displayed.
Press the
or
button or move the Flipper
switch up or down to scroll the words one by one.
Press and hold the button to scroll the display
continuously.
• When the “Scroll Setting” (Page 19) is set to ON, the
display is scrolled continuously.
• When the unit receives a message, the new
reception icon appears.
Press the RTN button to return to the previous screen.
NOTES
• You can also press the
or
button instead of the
Flipper switch to select an item or the other party.
• You can also press the
button instead of the OK button
or MODE knob to set an item or the other party.
Input the telephone number by using the ten keys (0
to 9, # and *).
NOTES
• Press the DEL. button to input *. Press the DEL. button again
within 2 seconds to input +. Press the +10 button to input #.
• To erase the numbers you already input, press the RETURN
button.
3
4
Press the
or ENTER button to place a call.
Press and hold the BAND button for at least 2 seconds
to finish the call.
31-EN
Remote Control Operation
The recommended remote control for this model is the RUE-4191.
Operation is also possible from the RUE-4135; however, a portion of the functions will be limited.
Operation on Remote Control RUE-4191 (Optional)
You can operate it with the optional remote control (RUE-4191). Change the EXT DVD/AUDIO/NAV. Switch, on the side of
the remote control, to AUDIO.
d
1
2
4
6
s
3
a
;
o
i
5
7
8
p
u
y
9
q
8 ENTER Button
TEL mode*3 : Place a call.
9 Joystick
List display UP/DOWN ( / )
p REAR Button
Not used.
q RETURN Button
TEL mode*3 : Cancel TEL mode. Used as a backspace at
the time of Direct dial.
w Numeric Keypad
TEL mode*3 : Input numbers and symbols. Press and hold
the 0 button for at least 2 seconds to switch Direct Dial
ON.
e AUDIO Button
Not used.
w
r SUB T. Button
Not used.
t
r
e
t ANGLE Button
Not used.
y DISP/TOP.M Button
Switch the display.
u MENU/SETUP Button
Press and hold the button for at least 2 seconds to access
the SETUP mode.
i MUTE Button
Press the button to lower the volume by 20dB instantly.
Press the button again to cancel.
f
(Rear of the Remote Control)
1 A.PROC. Button*1
Press the button to call the external audio processor
mode.*2
Button
2
PLAY/PAUSE
Radio mode : Tune switching
TEL mode*3 : Place a call.
3 POWER Button
Power ON/OFF
4
/
Button
Radio mode : SEEK UP/DOWN
CD/Changer mode : Music Sensor, BW/FF (Press and
hold)
DAB mode*4 : Service UP/DOWN
5 V.SEL. Button
Switch Audio/Navigation mode.
6 LIGHT Button
Light the indicator
/
Button
7 TILT
Display Angle UP/DOWN
32-EN
/
Button
o VOLUME
Volume UP/DOWN
;
Button
Not used.
a SOURCE Button
Select the audio source.
s
/ Button
Radio mode : Preset Selection
Changer mode : Disc Selection
MP3 mode*5 : Disc Selection
TEL mode*3 : List UP/DOWN (before calling).
d BAND Button
Radio mode : BAND Selection
CD/Changer mode : Changes Disc Mode
TEL mode*3 :
• Press the button to select the item for making a call.
• Press and hold the button for at least 2 seconds to
switch the TEL display ON/OFF.
• During a call, press and hold the button for at least 2
seconds to finish the call.
f EXT DVD/AUDIO/NAV. Switch
TV/MONI. Switch (Push)
Set to the “AUDIO” side to operate the INA-N333R of
Audio.
*1 For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you purchased.
*2 This button is used in conjunction with an optional Ai-NET
processor.
*3 When the optional Junction Box and cellular phone are
connected.
*4 When an optional DAB Receiver Box is connected.
*5 When an optional MP3 compatible changer is connected.
Operation on Remote Control RUE-4135 (Optional)
You can operate it with the optional remote control (RUE-4135). Change the AUDIO/NAV. Switch, on the side of the remote
control, to AUDIO.
S
VO
L.
E
RC
OU
1
ENTER
/
2
M
A.PROC.
E
UT
LO.PT.
ROUTE
1
5
4
BAN
D
i
RETURN
w
CE
POS. 2
3 VOI
5
6
q
FUN
C
7
BS
ON/OFF
8
8
9
OP/C
TEL. 0
L
DEST.
.
6
7
r
e
3
4
MENU
t
M. PT.
OK
p
DEL.DEST.
V. SEL.
9
/
Button
1 VOL.
Volume UP/DOWN
2 AUDIO/NAV. Button
Set to the "AUDIO" side to operate the INA-N333R of
Audio.
*2
3 A.PROC. Button
Press the button to call the external audio processor
mode.*1
4 MUTE Button
Press the button to lower the volume by 20 dB instantly.
Press the button again to cancel.
5 FUNC. Button
Not used.
6 OP/CL Button
Not used.
7
Button
Display Angle DOWN (only pressing MODE button)
9 V.SEL. Button
Switch Audio/Navigation mode.
p
Button
Display Angle UP (only pressing MODE button)
q Numeric Keypad
Not used.
w BAND Button
Radio mode: Radio Band Selection
CD/Changer mode: Changes Disc Mode
TEL mode*4: Press and hold the button for at least 2
seconds to access the TEL display.
e SOURCE Button
Select the audio source.
r MODE Button
Operates 7 to p (Flashes the Status Indicator for 5
seconds.)
t
Button
Push : PLAY/PAUSE
Radio mode: Preset Selection ( / ), SEEK UP/DOWN
( / )
CD/Changer mode:
Disc Selection ( / ), Music Sensor ( / ), BW/FF
( / Hold)
TEL mode*4 : Preset a call. List UP/DOWN (before
calling) ( / )
List display UP/DOWN ( / )
DAB mode*5 : Service UP/DOWN ( / )
MP3 mode*3 : Disc selection ( / )
*1 For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
*2 This button is used in conjunction with an optional Ai-NET
processor.
*3 When an optional MP3 compatible CD changer is connected.
*4 When the optional Junction Box and cellular phone are
connected.
*5 When an optional DAB Receiver Box is connected.
8 ON/OFF Button
Press the button to turn the power on/off.
33-EN
Information
In Case of Difficulty
If you encounter a problem, please review the items in
the following checklist. This guide will help you isolate
the problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected or consult
your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with
the proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
34-EN
CD
CD Player/Changer not functioning.
• Out of operating temperature range +50˚C (+120˚F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about
1 hour).
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
CD playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press the button. After the error indication disappears,
insert the disc again. If the above-mentioned solution does
not solve the problem, consult your nearest ALPINE dealer.
Indication for CD Player
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the button.
The movable display will open.
2) Press the button again for at least 2 seconds while the
movable display is open.
ERROR
• Mechanism error.
1) Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing
the button for a few times, consult your Alpine dealer.
• The disc cannot be read.
- Do not insert a scratched disc or an unplayable disc such as
DVD, VIDEO CD or CD-ROM.
Indication for CD Changer
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
ERROR 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not
eject, consult your Alpine dealer.
ERROR 02
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function, insert an
empty CD magazine into the CD Changer to receive the disc
left inside the CD Changer.
NO MAGAZINE
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NOTE
When the “ERROR” is displayed:
In case that the disc cannot be ejected by pressing the button,
press the RESET switch (refer to page 5) and press the button
again.
If not ejecting, consult your Alpine dealer.
NO DISC
• No indicated disc.
- Choose another disc.
35-EN
Information
Specifications
GENERAL
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
87.5 – 108.0 MHz
0.7 µV
90 dB
65 dB
35 dB
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
531 – 1,602 kHz
25.1 µV/28 dB
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
153 – 281 kHz
31.6 µV/30 dB
Power Requirement
Maximum Power Output
Maximum Pre-Output Voltage
Bass
Treble
Weight
14.4 V DC
(11–15 V allowable)
45 W × 4
2 V/10k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
2.0 kg (4 lbs. 6 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
155 mm (6-3/32")
NOSEPIECE SIZE
CD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
95 dB
85 dB (at 1 kHz)
Width
Height
Depth
170 mm (6-11/16")
46 mm (1-13/16")
24 mm (15/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
PICKUP
Wave length
Laser power
655 nm
CLASS II
NAVIGATION SECTION
Aerial Type
Reception Frequency
Reception Sensitivity
Reception Method
Micro-strip planar aerial
1575.42±1 MHz
-130 dB max.
Parallel 12 channels
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
36-EN
Installation and Connections
Before installing or connecting the unit, please read
the following and pages 3 and 4 of this manual
thoroughly for proper use.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your INA-N333R. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the INA-N333R to the fuse box,
make sure the fuse for the intended circuit of the INA-N333R
has the appropriate amperage. Failure to do so may result in
damage to the unit and/or the vehicle. When in doubt, consult
your ALPINE dealer.
• The INA-N333R uses female RCA-type jacks for connection
to other units (e.g. amplifier) having RCA connectors. You
may need an adaptor to connect other units. If so, please
contact your authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables
to each other or to the vehicle body.
IMPORTANT
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
37-EN
Installation and Connections
NOTE
Installation
For the screw *, provide a proper screw to the chassis installing
location.
Installing the Main Unit
Metal plate
Detachable
Front panel
Caution
When you install this unit in your car, do not remove the
Detachable Front Panel.
If the Detachable Front Panel is removed during installation, you
might press too hard and warp the metal plate that holds it in place.
3
Slide the INA-N333R into the dashboard. When the
unit is in place, make sure the locking pins are fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the locking
pin down with a small screwdriver. This ensures that
the unit is properly locked and will not accidentally
come out from the dashboard. Install the Detachable
Front Panel.
Lock pin
Caution
Do not block the unit's fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit
and may cause a fire.
Air ventilation
hole
<Rear side>
1
Rubber Cap
(Included)
Hex Bolt
(Included)
Bracket
Removal
1 Remove the detachable front panel.
2 Use a small screwdriver (or similar tool) to push the
locking pins to the "up" position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Dashboard
Mounting sleeve
(Included)
Front frame
INA-N333R
Slide mounting sleeve from main unit (see "Removal"
on this page). Slide the mounting sleeve into the
dashboard.
2
Screws (M5 × 8)
(Included)
Metal Mounting Strap
INA-N333R
Screw
∗
Bolt Stud
Hex Nut (M5)
Mounting Bracket
INA-N333R
When your vehicle has the Bracket, mount the long hex
bolt onto the rear panel of the INA-N333R and put the
Rubber Cap on the hex bolt. If your vehicle does not
have the Mounting Support, reinforce the head unit
with the metal mounting strap (not supplied). Connect
all the leads of the INA-N333R according to details
described in the CONNECTION section.
38-EN
Installing the GPS Antenna
1
Speed Sensor Lead or Parking Brake Lead
Connection
Mount the antenna on the roof.
Clean dust and oil at the mounting location and mount
the antenna.
NOTES
• The magnet of the antenna is very strong. Proceed cautiously
to prevent any damage to the vehicle’s body. Keep the magnet
away from articles susceptible to magnetic fields such as
credit cards, watches, etc.
• Do not paint the antenna. Reception sensitivity may be
decreased.
For leads which need branching to the supplied speed
sensor and parking brake, use the solderless
connectors.
1
Speed sensor auxiliary cable
or
Parking brake auxiliary cable
Antenna
(Included)
To
Speed sensor cable
or
Parking brake cable
Vehicle lead
2
Pliers
Mounting the antenna inside the vehicle.
1. Clean the mounting location.
2. Put on the antenna mounting plate.
3. Mount the antenna.
NOTES
• Mount the antenna on a flat plane of the dash board or rear
tray.
• Some thermal reflection type or thermal absorption type glass
may interrupt high frequency waves. If reception is poor with
the antenna installed inside the car, try to mount the antenna
outside the car.
Antenna
(Included)
NOTE
The main unit must be mounted within ± 5 degrees of the
horizontal plane, left to right, and 30 degrees of the horizontal
plane, back to front.
Less than 30°
Antenna mounting plate
(Included)
2
Routing the antenna cable.
1. Route the cable using the provided cable clampers
to take up the cable’s slack.
2. Use the waterproof pad when running the cable
under the vehicle’s rubber gasket.
3. Attach the cable at several points using the
remaining cable clampers.
• The unit may not be able to show your present
position accurately if the angle is too big.
For best performance, be sure to mount the unit as
horizontally as possible.
Cable clampers
(Included)
Water proof pad
39-EN
Installation and Connections
Connection
Antenna
ISO Antenna Convertor Plug
ISO Antenna Plug
(Yellow/Blue) PARKING BRAKE
1
2
To the parking brake signal line
(Pink/Black)
AUDIO INTERRUPT IN
3
(Blue/White)
REMOTE TURN-ON
4
To vehicle phone
To amplifier or equalizer
(Orange) DIMMER
To the instrument cluster
illumination lead
5
(Red)
IGNITION
(Black)
GND
7
(Blue)
POWER ANT
8
choke
coil
p
To power antenna
6
q
Ignition Key
9
Battery
BATTERY (Yellow)
SPEED SENSOR
(Green/White)
w
To the vehicle speed pulse line
∗
CD Changer
(Ai-NET)
(Sold Separately)
speed sensor
auxiliary lead
e
t
r
To remote control
interface Box
To RDS-TMC Box (TMC-001P)
(refer to page 42 for connection)
o
Amplifier
Speakers
Front
d
s
;
Amplifier
Rear
Amplifier
Subwoofer
s
u
i
a
Ai-NET
y
NORM
s
EQ/DIV
(Green)
g
(Green/Black)
h
j
Rear Left
(White)
Front Left
f
40-EN
(White/Black)
k
(Gray/Black)
l
(Gray)
/
(Violet/Black)
z
(Violet)
x
Speakers
Front Right
Rear Right
1 Antenna Receptacle
Connect to the supplied ISO antenna convertor plug.
2 Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INA-N333R.
3 Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio Interface output of a cellular
phone which provides ground shorting when a call is
received.
4 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
5 Dimmer Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will enable the vehicle's
dimmer control to dim the backlighting of the unit.
6 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+) 12V
only when the ignition is turned on or in the accessory
position.
7 Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
8 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
NOTE
This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
9 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
p Fuse Holder (10A)
q ISO Power Supply Connector
w Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V - 3V)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
e Remote Control Interface Connector
To remote control interface box.
r To RDS-TMC Receiver (Optional)
NOTE
To connect an Alpine RDS-TMC Receiver, consult your Alpine
dealer.
t GPS Antenna (Included)
y Power Supply Connector
u Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with AiNET.
i System Switch
When connecting a processor using Ai-NET, place this
switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
NOTE
Be sure to turn the power off to the unit before changing the
switch position.
o Front Output RCA Connectors
RED is right and WHITE is left.
; Rear Output RCA Connectors
RED is right and WHITE is left.
a Subwoofer Output RCA Connectors
RED is right and WHITE is left.
s RCA Extension Cable (Sold Separately)
d Ai-NET Cable (Included with CD Changer)
f ISO Connector (Speaker Output)
g Left Rear (+) Speaker Output Lead (Green)
h Left Rear (–) Speaker Output Lead (Green/Black)
j Left Front (+) Speaker Output Lead (White)
k Left Front (–) Speaker Output Lead (White/Black)
l Right Front (–) Speaker Output Lead (Grey/Black)
/ Right Front (+) Speaker Output Lead (Grey)
z Right Rear (–) Speaker Output Lead (Violet/Black)
x Right Rear (+) Speaker Output Lead (Violet)
* If the connectors of the vehicle are not ISO type or they
are ISO type but not equipped with the speed sensor
terminal on the vehicle side ISO connector, use the
supplied speed sensor auxiliary cable to connect to the
speed sensor cable of the vehicle.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
41-EN
Installation and Connections
Connection with optional RDS-TMC Receiver Box TMC-001P
<INA-N333R>
TMC-001P
Attached
antenna
ACC (Ignition) (Red)
Ignition Key
Battery lead (Yellow)
Ground (Black)
Battery
TMC-001P
TMC Receiver Box
(Sold Separately)
∗ For further information about the connection and
installation of TMC-001P, refer to the owner’s manual of
TMC-001P.
NOTE
• Matching the optional Navigation Disc (NVD-T003) with the RDS-TMC Receiver Box (TMC-001P) may cause function failure to part of
the built-in TMC tuner.
42-EN
Händlerstemple
Tipps der Polizei:
[
[
[
[
[
[
Stellen Sie Ihr Fahrzeug stets gut sichtbar ab.
Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit.
Lassen Sie keine Wertsachen sichtbar im Auto liegen.
Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle.
Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.
Informieren Sie sich über technische Sicherungsmöglichkeiten bei einer Kriminalpolizeilichen
Beratungsstelle.
Gerät 1
Modell-Nr.:
Hersteller:
Seriennummer:
A
L
Kaufdatum:
Preis:
R
Car Audio and Navigation Systems
GERÄTE-PASS
AUDIO SYSTEME
Fahrzeugmarke:
Typ:
Amtl. Kennzeichen:
Name des Halters:
Straße:
Wohnort:
Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn
außerhalb des Fahrzeugs auf:
Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der
Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung
nach den Tätern.
Download PDF