FWA-300 User manual Advantech Internet Security Platform

FWA-300 User manual Advantech    Internet Security Platform
FWA-300 User manual
Tabletop Internet security platform with VIA C7 processor based and 4 GbE
Front LAN Ports
Advantech Internet Security Platform
Copyright Notice
This document is copyrighted, 2007. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice. No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written permission of the
original manufacturer. Information provided in this manual is intended to be accurate
and reliable. However, the original manufacturer assumes no responsibility for its use,
nor for any infringements upon the rights of third parties which may result from its use.
CE Notification
The FWA-300, developed by Advantech Co., Ltd., has passed the CE test for
environment specifications when shielded cables are used for external wiring. We
recommend the use of shielded cables. 1st Edition Printed in Taiwan June 2007
Product warranty
Advantech warrants to you, the original purchaser, that each of its products will be free
from defects in materials and workmanship for two year from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of our
customers never need to use our repair service. If an Advantech product is defective, it
will be repaired or replaced at no charge during the warranty period. For out-of-warranty
repairs, you will be billed according to the cost of replacement materials, service time
and freight. Please consult your dealer for more details. If you think you have a defective
product, follow these steps:
1
Collect all the information about the problem encountered. For example, CPU
speed, Advantech products used, other hardware and software used, etc. Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2
Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3
If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return more
quickly.
4
Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt) in a
shippable container. A product returned without proof of the purchase date is not eligible
for warranty service.
5
Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Packing List
Before installation, ensure that the following materials have been received:
ٛ
ٛ
ٛ
ٛ
ٛ
One FWA-300 Internet Security Platform
One box of accessories
One warranty certificate
If any of these items are missing or damaged, contact your distributor or sales
representative immediately.
Technical Support and Sales Assistance
If you have any technical questions about the FWA-300 or any other Advantech products,
please visit our support website at:
http://www.advantech.com.tw/support
ٛ
http://www.advantech.com.
ٛ
For more information about Advantech's products and sales information, please visit:
Contents
1. General Information....................................... 1
1.1 Introduction......................................................................... 2
1.2 Features................................................................................. 2
1.3 Specifications................................................................... 2
1.4 Dimensions....................................................................4
1.5 Model List....................................................................5
2
System Setup............................................... 6
2.1 Removing the cover............................................................................. 7
2.2 Installing CPU Heat-sink...................................... 8
2.3 Installing Memory Module............................................................9
2.4 Installing Hard Drive........................................................................10
2.5 Installing Compact Flash...................................................11
Appendix A...................................................15
A.1 NAME-300 Mother Board...............................................16
Figures
Figure 1-1: FWA-300 dimensions................................................................... 4
Figure 1-2: Outlook of FWA-300......................................................................... 4
Figure 2-1: Front view of FWA-300.......................................................... 7
Figure 2-2: Removing the cover............................................................. 7
Figure 2-3: Top view of FWA-300.......................................................... 8
Figure 2-4: Installing CPU Heat-sink..................................... 9
Figure 2-5: Installing Memory Module steps.................................................. 10
Figure 2-6: Installing Hard Disk Drive steps............................................. 11
Figure 2-7: Installing Compact Flash steps.................................... 12
1
General Information
1.1 Introduction
The FWA-300 is a compact and power efficient tabletop Internet Security Platform
designed for entry-level SMB/SOHO/Home offices security applications. The platform
is driven by the power saving VIA C7 CPU, combined with VIA CX700 chipset, making
it the ideal alternative for an economical entry level security solution. The VIA C7™
processor has built-in PadLock™ Security Engine which acts as a fast and reliable
hardware security accelerator without the added cost of an extra add-on card. With
the Marvell 8001 Ethernet controllers, the FWA-300 provides four Gigabit Ethernet
(GbE) LAN ports for robust connectivity.
The FWA-300 supports optional IDE, which effectively enhances the implementation of
many internet security applications such as IDS/IPS, anti-virus, and VPN Gateways. A
CompactFlash slot is available for OS and application updates, which can be easily
accessed and replaced through an easy removable cover on the back. Plus there are
LED indicators on the front panel to display platform status and a 9-pin RS-232 serial
port for local system management, maintenance and diagnostics. The FWA-300 is FCC,
CE, UL and RoHS compliant.
For more information on VIA PadLock™ Security Engine, please visit
http://www.via.com.tw/en/initiatives/padlock/index.jsp
1.2 Features
ٛ
ٛ
ٛ
ٛ
ٛ
ٛ
Tabletop Internet security platform
VIAl® C7 1GHz CPU processor
Four 10/100/1000 Gigabit Ethernet ports
Console port for local setting
Hard drive mounting bracket for 2.5” drive
VIA PadLock™ Security Engine for hardware crypto acceleration
1.3 Specifications
• Processor System:
CPU: VIA C7 1.0GHz processor
ٛ
Max. Speed: 533/400 MHz FSB
ٛ
L2 Cache: 2MB or 1MB
ٛ
Chipset: VIA CX700
ٛ
BIOS: Award 4 Mb Flash
ٛ
Memory: Support DDR2 533/400, Max. Capacity 1 GB, Socket 200-pin SOD DIMM x 1
Ethernet: 4 10/100/1000 Gigabit Ethernet, RJ-45 x 4
Drive Bay: 2.5”HDD x1
Management: Console RS-232 x1
Cooling: Fan (15 CFM) x2
Miscellaneous: Power Switch, 2 LED indicators for Power/HDD, 12 LED
indicators for LAN ports, CompactFlash Socket x1
ٛ
• Adapter Power Requirement: Input: Power adapter, AC 90 ~ 264 V @ 47 ~ 63 Hz, full range
Output: 65W
• Operating Environment: Operating: Temperature 0 ~ 40 °C (32 ~ 104 °F), Humidity 5 ~ 85 %
ٛ
ٛ
Non-Operating: Temperature -20 ~ 75 °C (-4 ~ 167 °F), Humidity 5 ~ 95 %
Dimensions (W x H x D):Tabletop: 250 x 44 x 170.5 mm (9.8" x 1.7" x 6.7")
Weight: 1.2 Kg (8.8 lb)
1.4 Dimensions
1.5 Model List
FWA-300: Tabletop Internet security platform, with VIA C7 processor and four
ٛ
10/100 GbE Ethernet ports supporting
ٛ
2
System Setup
Setting up your FW-300 requires only a screwdriver and a small amount of time.
Before you begin, you should also gather together all of the device you plan to install,
as well as the CPU, RAM, HDD, and etc. The front panel of FWA-300 includes two LEDs
where one is power LED and another is HDD LED, 12 LEDs for LAN indicators. On the
rear panel, two USB ports, four Ethernet ports, RS-232 console port, there is a power
switch located on the top left hand corner.
Power
S/W
USB
COM
LAN LEDS
4 GbE Lan ports
POWER & HDD LED
Figure 2-1: Front view of FWA-300
2.1 Removing the cover
There are screws which secure the cover to the chassis. They are along the rear sides,
near the top. Remove them, and then slide the cover to the rear of the chassis.
Figure 2-2: Remove top cover
CPU & Heat sink
2.5”HDD
Figure 2-3: Inside of FWA-300
2.2 Installing CPU heat-sink
1
Apply the thermal tape to provide better heat conduction between your CPU
and cooling fan. Position the cooling fan on top of the CPU. Use screw driver to fix the
heat-sink sequence.
2
Make sure the CPU fan power connector is plugged to the motherboard fan
power connector, than installing CPU is completed.
4
1
2 3
Figure 2-4: Install CPU
2.3 Installing Memory Module
1
Unlock a DIMM socket by. Align the notch of the DIMM memory module to
match on the socket and insert the DIMM into the socket until the DIMM is properly
seated.
2
Press the DIMM inward to lock the DIMM memory module. Installing memory
module is completed.
Figure 2-5: Install RAM module
2.4 Installing Hard Disk Drive
1
Unscrew each side of the HDD supporting frame on the chassis and pull it out.
2
Put the HDD above the HDD supporting frame and position the screws
accordingly.
3
Screw each side of the HDD supporting frame to fix on the chassis.
4
Connect the IDE cable included in the accessory box to the connector on the
HDD. And set the HDD to slave mode via a jumper, Connect IDE cable to the MB.
Installing Hard Disk Drive is completed.
Figure 2-6: Install HDD
2.5 Installing Compact Flash
1
Position a CompactFlash disk accordingly in the CompactFlash disk socket and
push it inward. Installing CompactFlash disk is completed.
Figure 2-7: Install CF card
A
Pin Assignments
APPENDIX
A.1 NAME-300 Mother Board
VGA
AT power
IDE
SATA
JCMOS1
CPU
1GHz
PS2 KB/M
USB
PCI
golden
finger
PRT
COM
LAN ports
Jumper setting of FWA-300:
No.
Jumper
Name
Description
Default Setting
1
J1
System Reset
Off
2
J3
ATX Power On
On
3
J4
HDD Active LED ( Only for
On for FWA-3300
FWA-3300 )
4
JCMOS1 CMOS Clear Jumper
Connect Pin 1 and Pin 2 ( Connect Pin 2 and Pin 3 to
clear CMOS )
5
JP_HWM1 Internal Buzzer
On
No. Connector
Description
6
CN_KBMS1
PS2 KB/Mouse connector
7
CN_COM1
D-SUB COM port connector
8
CN1 ~ CN4
Gigabit Ethernet connector
9
CN7
USB PIN header (3,4)
10 USB1
USB connector (1,2)
11 CN_COM2
COM2 PIN header
12 CN8
Printer port PIN header
13 GPIO1
General purpose Input/Output PIN
14 CN5 ~ CN6
SATA connector
15 CN_IDE1
44PIN IDE PIN header for 2.5" HDD
16 CN_VGA1
VGA 15P PIN header
17 CN10
DC IN Power adapter connector
Jumper & connector, location notice of item no.:
17
16
3
4
1
2
5
12
6
9
11
10
7
13
8
15
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising