brochure ddi602-f1

brochure ddi602-f1
Product Data Sheet
DDI602-F1
Outdoor Dual Technology detector 10.525 GHZ 10/20/30m - 33/66/98ft selectable
Outdoor Dual Technology motion sensor
DDI602 Outdoor Dual PIR Detector is an outdoor
motion detector and alarm trigger that uses two
independent passive infrared detectors plus a
microwave sensor module. All three sensors must
trigger to cause the detector to signal an alarm.
Easy and quick to install
Programmable options include a variable pulse
count and a choice of three detection ranges: 10
m / 33 ft., 20 m / 66 ft., and 30 m / 98 ft. DDI602
includes jumpers that let you configure internal
end-of-line (EOL) resistor values, when EOL
resistors are required. Moreover, the integral
dual-axis tilt sensor allows 180º of pan and 90º
of tilt, which increases the speed of the outdoor
installation and provides incredibly accurate
aiming of the detection pattern.
Aesthetics and hidden sensor module
DDI602 design has a neat and professional
appearance that gives no visible indication of the
orientation of the detector head and totally hides
the wiring.
Standard Features
E
E
E
E
E
E
E
E
Electronic range setting: 10/20/30m
Attractive aesthetics
10 to 70º detection angle
180º pan & 90º tilt for flexible install
Sensor module is hidden
Built in EOL resistors
High dust & humidity resistance (IP65)
5 years warranty
DDI602-F1
Outdoor Dual Technology detector 10.525 GHZ 10/20/30m - 33/66/98ft selectable
Specifications
Programmable: 10 m / 30 ft., 20 m / 66 ft., or 30 m / 98 ft.
10 to 70° detection angle, 30 x 24 m / 98 x 79 ft. coverage max.
180° pan, 90° tilt
28 zones for each detection element, which can be masked with the curtain
sliders
Double silicon shielded quad element eliminates 50,000 lux of white light
Silent, solid state, magnetically immune. Microwave AND PIR.
Volt free relay, signal contact 24 VAC/DC at 50 mA with an integral 25
series resistor. Alarm time 5 seconds.
Volt free relay, signal contact 24 VAC/DC at 50 mA with an integral 25
series resistor.
Alarm time 5 seconds.
9 to 15 VDC
11 mA (12 V nominal)
1 or 2
Analogue (thermistor) and digital sensitivity adjustment
Digital microprocessor with nonvolatile memory
-30 to +65°C / -22 to 149°F
High impact ABS plastic with HDPE cover, UV stabilized
147 x 187 x 140 mm / 5.79 x 7.36 x 5.51 in.
323 g net, 549 g gross / 11.39 oz net, 19.37 oz gross
Detection Area
Coverage
Adjustment
Fresnel lens
Customized optics
Outputs
N/O
N/C
Power input
Current
Pulse count
Temperature compensation
Control
Operating/storage temperature
Housing
Dimensions, W x H x D
Weight
LEDs
Top red
Programming LED
Red
PIR active
Green
Microwave active
Blue
Detector alarm
Infrared
Walk tester communication
10.525 GHz (Albania, Argentina, Australia, Belgium, Brazil, Denmark, Holland,
Hungary, Iceland, Indonesia, Lativa, Lithuania, Malta, Norway, Portugal,
Russia,South Africa, Spain, Taiwan, Ukraine, USA)
1, 2.2, 3.3, 4.7, 5.6, and 6.8 k ohm.
Variable up to 6m/20ft - Optimum height 3m / 10ft for full range
EN50130-5, Grade 2, Class IV
Approved
Microwave module
Built in EOL resistors' values
Mounting height
EN approved
Incert
Ordering Information
Part No.
DDI602-F1
DI601-WT
Description
Outdoor Dual Technology detector 10.525 GHZ 10/20/30m - 33/66/98ft
selectable
Walk tester for DI601 and DDI602 series
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-HQ-DDI602-F1-2011-04-27 11:53:17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement