Daewoo | DVG-8000D | Specifications | Daewoo DVG-8000D Specifications

SAFETY INFORMATION
NOTE:
CLASS 1
LASER PRODUCT
This player can be used only where the power supply is
100~240V, 50/60Hz. It cannot be used elsewhere.
CAUTION:
DVD/CD PLAYER IS A CLASS 1 LASER PRODUCT.
HOWEVER THIS DVD/CD PLAYER USES A
VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE THE DVD/CD
PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS DVD/CD PLAYER IS PLUGGED TO
THE WALL OUTLET, DO NOT PLACE YOUR EYES
CLOSE TO THE OPENING OF THE DISC TRAY
AND OTHER OPENINGS TO LOOK INTO THE
INSIDE OF THIS PLAYER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF, REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
(Back of player)
CAUTION -LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
ATTENTION -RAYONNEMENT LASER EN CAS D’OUVERTURE.
NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT -LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.
ADVARSEL -LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN.
ADVARSEL -LASERSTRÅLING NÅR DEKSEL ÅPNES.
STIRR IKKE INN I STRÅLEN.
VARNING -LASERSTRÅLING NÄR DENNA DEL ÄR ÖPPNAD.
STIRRA EJ IN I STRÅLEN.
VARO!
-AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ TUIJOTA SÄTEESEEN.
(Inside of player)
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PLAYER TO RAIN
OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
•1•
Downloaded From Disc-Player.com Daewoo Manuals
TABLE OF CONTENTS
1. IMPORTANT SAFEGUARDS ---------------------1
12. PLAY DISCS IN VARIOUS WAYS ------------20
2. TABLE OF CONTENTS ----------------------------2
• SELECT LANGUAGE ---------------------------20
3. FEATURES---------------------------------------------3
• SELECT CHANNEL------------------------------20
4. ABOUT MANUAL-----------------------------------4
• MUTE------------------------------------------------20
5. PLAYABLE DISCS-----------------------------------4
• FAST PLAY-----------------------------------------21
6. TERMS FOR DISCS ---------------------------------5
• SLOW PLAY ---------------------------------------22
7. BEFORE OPERATION ------------------------------7
• REPEAT PLAY-------------------------------------22
8. PRECAUTIONS FOR DISC------------------------7
• PLAYING A DISC REPEATEDLY ------------22
9.PREPARATIONS BEFORE OPERATION -------8
• REPEAT SOME PARTS --------------------------23
• CHECK ACCESSORIES --------------------------8
• SELECT SUBTITLES ----------------------------24
• USE REMOTE CONTROL -----------------------8
• SELECT ANGLES --------------------------------25
• FRONT PANEL -------------------------------------9
• 3D SURROUND -----------------------------------25
• DISPLAY -------------------------------------------10
• TIME SEARCH AND REMAINING TIME--26
• NAMES AND LAYOUT OF REMOTE CONTROLS--11
• RESUME PLAY -----------------------------------28
• REAR PANEL -------------------------------------12
• ZOOM PLAY---------------------------------------28
10. CONNECTIONS-----------------------------------13
• PROGRAM PLAY---------------------------------29
11. BASIC OPERATIONS ----------------------------16
• DIGEST PLAY -------------------------------------29
• PLAY DISCS ---------------------------------------16
• PLAY KARAOKE---------------------------------31
• SYSTEM SETTING-------------------------------17
13. FUNCTION SETTING---------------------------32
• STEP, PAUSE---------------------------------------17
• GENERAL SETUP--------------------------------33
• OSD --------------------------------------------------17
• SPEAKER SETUP---------------------------------35
• VOLUME CONTROL----------------------------18
• DOLBY DIGITAL SETUP-----------------------36
• DVD MENU PLAY -------------------------------18
• DOLBY SURROUND SETUP------------------37
• MP3 PLAY ------------------------------------------18
• PREFERENCES -----------------------------------37
• PBC PLAY ------------------------------------------19
14. TROUBLESHOOTING---------------------------39
• SELECT WITH NUMBER BUTTONS -------19
15. TECHNICAL SPECIFICATIONS --------------40
16. REGIONAL RESTRICTION CODE-----------41
•2•
Downloaded From Disc-Player.com Daewoo Manuals
FEATURES
❏ OUTSTANDING SOUND QUALITY
Dolby Digital
system developed by Dolby Laboratories and DTS
developed by
DTS Inc., features high quality surround sound, can be played in DVD or CD disc at home,
to reproduce high quality sound effects.
❏ HIGH DEFINITION
The unit adopts MPEG2 coding format and brings the horizontal resolution over 500 lines.
❏ UNIQUE FUNCTIONS
Multi-angle and multi-language bring unique trick functions.
Parent lock makes it easy to control the content of discs.
❏ SCREEN
Ordinary screen and wide screen (16:9) are available.
❏ COMPATIBILITY
The unit can play DVDs, and is compatible with CDs.
❏ ZOOM
It can enlarge pictures 1.5 times, twice or four times their size.
❏ 9-PICTURE DIGEST (VCD)
It can look through the content of discs and select to play.
❏ MULTI-FUNCTIONS
Fast forward, fast reverse, slow play, frame play , repeat play and program play.
❏ TIME SEARCH
It can search a specific part on a disc, especially good for watching fiction movies.
❏ RESUME PLAY
It can memorize the position where the disc is stopped and resume playback.
❏ CONTENT DISPLAY
It adopts (a coloured) fluorescent display and English/French/Spanish OSD, making the
disc content clearer.
❏ VIDEO OUTPUT
Standard video, S-video signal output mode and component output easy system change.
❏ AUDIO OUTPUT
Analog audio output, coaxial and optical digital audio output, can be connected with the
appropriate amplifier to enjoy high quality sound effects.
❏ 5.1 CHANNEL ANALOGUE AUDIO OUTPUT
Six phono sockets for analogues 5.1 channel audio output in order to connect to an amplifier
with analogue 5.1 channel input terminal. They are FRONT left, FRONT right,
SURROUND left, SURROUND right, SUBWOOFER, CENTER respectively.
❏ MIC
Used to make connection with the MIC. Please insert the MIC jack into this socket. The
downmix mode is selected analog audio out whenever the MIC are plugged in.
❏ MIC LEVEL
Used to adjust the MIC volume.
•3•
Downloaded From Disc-Player.com Daewoo Manuals
ABOUT MANUAL
PRINCIPLES FOR WRITING
MARK
• This manual mainly introduces how to
use buttons on the remote control.
• You may operate the unit if the buttons
on the unit have the same or similar
names as or to those on the remote
control.
• The marks shown in the chart on the
right are used in the manual.
DVD
SVCD
VCD
CD
INDICATION
functions of DVD
functions of super-VCD
functions of VCD
functions of CD
PLAYABLE DISCS
TYPE
DVD
Super-VCD
VCD
CD
MARK
CONTENT
SIZE
audio+video
12cm
(motion
pictures)
8cm
audio+video
(motion pictures)
12cm
about 45mins
audio+video
12cm
about 74mins
(motion pictures)
8cm
about 20mins
12cm
about 74mins
8cm
about 20mins
PLAYING TIME
about 2hrs (single-side disc)
about 8hrs (double-side disc)
about 80mins (single-side disc)
about 160mins(double-side disc)
audio
MP3
audio
12cm
about 160mins
CD-R
audio
12cm
about 600mins
CD-RW
audio
12cm
about 600mins
•4•
Downloaded From Disc-Player.com Daewoo Manuals
TERMS FOR DISCS
TITLE
STRUCTURE OF DVD
The images or music of a DVD are
divided into some units, among which
title is the biggest one.
When playing a DVD, the movie is the
title.
When playing a CD, the combined tracks
make up the title.
CHAPTER
DISC
TITLE
CHAPTER
STRUCTURE OF CD
It is smaller than title among the units of
a DVD. A title is made up of several
chapters , and each chapter has a
number for search. But some discs
may not have numbered chapters.
DISC
TRACK
TRACK
In a CD, each track has a number to
enable search functions.
REGION MANAGEMENT INFORMATION
This unit is designed and manufactured to respond to the Region Management
information that is recorded on a DVD disc. The region number of this player is
“3”. If the region number described on the DVD discs does not correspond to the
Region number of this player, the player will not play this disc. This player will
play DVD discs made for “ALL” regions. Therefore, this player will play DVD
discs marked with labels containing the region number “3” or “ALL”.
3
(Region 3)
(Region ALL)
•5•
Downloaded From Disc-Player.com Daewoo Manuals
TERMS FOR DISCS (Continued)
SCENE
The menu pictures, motion and motionless pictures of a Super-VCD, VCD or CD with
PBC function can be divided into some parts, these parts are scenes. Each scene has a
number for search.
PBC (PLAYBACK CONTROL) (SUPER-VCD, VCD)
It is signals recorded in a super- VCD or VCD2.0 to control playback.
DISC TYPE
FUNCTION
VCD1.1
without PBC
enjoy music and images (motion pictures)
super-VCD and VCD with
PBC
Besides the images of VCD1.1, play interactive
software with the menu pictures shown on the TV
screen (PBC play). If the disc has motionless
pictures, high-resolution playback is also available.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
•6•
Downloaded From Disc-Player.com Daewoo Manuals
BEFORE OPERATION
SECURITY
• Before operation, check if the voltage of the unit is in line with the local voltage.
• Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.
• When the plug of the unit is connected to the mains outlet , the unit will be still
connected to AC even if the power is turned off.
• Disconnect the plug as soon as liquid or objects enter the unit. The unit can not be used
until being checked by experts.
• Do not open the cabinet as laser rays employed by the unit may damage eyes. Any
servicing should be done by qualified service personnel.
PLACEMENT
• Put the unit where ventilation is good enough to prevent overheating.
• Never put the unit in direct sunlight or near heat sources.
• Put the unit horizontally, never put any heavy object on the unit.
• To protect the pickup, do not put the unit where there is dust. If there is dust on the
pickup, use a cleaning disc to clean it. Paying particular attention to the operating
instructions of the cleaning disc.
CONDENSATION
Moisture will appear on the pickup lens in the following cases:
• The unit is suddenly moved from a cold place to a warm place.
• The unit is put in a room with a heater, or in cold air from an air-conditioner.
• Using the unit in a humid place. In these cases, the unit can not work. Unload the disc
and leave the unit on for about one hour to evaporate the moisture.
CLEANING
• Use a soft cloth with a little neutral detergent to wipe the cabinet, panel and controls.
Never use abrasive paper, polishing powder, solvent like alcohol or gasoline.
PRECAUTIONS FOR DISC
HANDLING DISC
CLEANING DISC
• To keep the disc clean, do not touch the
playsides of the disc.
• Do not attach paper or tape to the disc.
• Before playback,
wipe the disc
outwards from
the centre with
clean cloth.
• Keep the disc away from direct
sunlight or heat sources.
• Store the disc in a disc case after
playback.
• Do not use any type of solvent such as
thinner, benzine, commercially
available cleaners or antistatic spray.
•7•
Downloaded From Disc-Player.com Daewoo Manuals
PREPARATIONS BEFORE OPERATION
This part introduces the work to be done before operating the unit.
CHECK ACCESSORIES
Check if you have all the accessories after the carton is opened.
MUTE
3D
OSD
1
2
3
SUBTITLE
4
5
6
ANGLE
8
9
10+
0/10
7
SET UP
V-MODE
INTRO
TITLE.PBC
PLAY
REPEAT
P/N
A-B
RETURN
MENU
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
CHANNEL
b
VOLUME
#
LANGUAGE
• Remote control
• AAA batteries
• Video/Audio cord
• Owner’s manual
3. Close the battery
compartment.
4. Point the remote
control at the
remote sensor.
It will operate up
to a range of 7
meters and an
angle of 30°
either side of the
remote sensor on
the front of the
player.
USE REMOTE CONTROL
1. Open the battery
compartment.
2. Insert two AAA
batteries, make
sure to
match"+"and ""of the batteries
to the marks in
the battery
compartment.
Notes:
1. Batteries can generally last for about 6 months. Change the batteries if the
remote control does not work, or the operating range reduces.
2. If the remote control is not used for a long time, remove the batteries to prevent
battery leakage.
3. When
appears on the TV screen by pressing the button. The disc does not
have the pertinent button.
•8•
Downloaded From Disc-Player.com Daewoo Manuals
PREPARATIONS BEFORE OPERATION (Continued)
FRONT PANEL
= ‘
+ “
5
8 6
7
0
TITLE
PBC SETUP LANG
OPEN/
CLOSE
PLAY
6
3
2
1
STOP
STANDBY/ON
7
4
8
5
4
9
0/10
10+
DVD/VCD/SVCD/DVCD/CD/MP3/CD-R/CD-RW
II/STEP
CHANNEL
RETURN
MIC LEVEL
MIC1
SEARCH
ECHO
MIC2
SKIP
MIN
MAX
MIN
MAX
!
$
@#
^
%
&
*
! STANDBY/ON button
To switch the unit On or Off when
connected to AC power outlet
@ PAUSE/STEP button
Used to view one frame at a time
during play. When you continue
pressing this button, it will function
continuously. Press PLAY/SELECT
button for normal play.
# FR (Fast Reverse) button
To play the disc fast reverse.
$ FF (Fast Forward) button
To play the disc fast forward.
% PREV button
To skip back from the current chapter (for
DVD) or track (for VCD or CD).
^ NEXT button
To skip forward to the next chapter (for
DVD) or track (for VCD or CD. If playing a
Video CD with PBC, this button works as the
NEXT button to move to the next play list.
& RETURN
* REMOTE SENSOR
Receives a light signal from the remote controller.
( DISPLAY
Displays operation status
(
9
)
1
2
3
4
5
6
7
8
9
0
“
‘
+
=
)1
2
3
MIC 1 JACK
MIC 2 JACK
MIC LEVEL
ECHO ADJUSTMENT
10+ NUMBER
NUMBER (1-0/10)
STOP
PLAY(SELECT) button
To play the loaded disc. Press this
button to go to the preferred item when
the menu is displayed on the TV screen.
OPEN/CLOSE button
To open or close the disc tray.
DISK TRAY
To load or unload a disc. Put a disc to
be played on here.
POWER INDICATOR
LANGUAGE
SETUP
TITLE /PBC
CHANNEL
•9•
Downloaded From Disc-Player.com Daewoo Manuals
PREPARATIONS BEFORE OPERATION (Continued)
DISPLAY
!
@
#
%
*
^ &
PBC DVD SVCD (1) (2) (3)
DTS
AC-3
)
(
MUTE RESUME
REPEAT 1 ALL
A-B
D
OVER
4
$
3
! PLAY/PAUSE/STEP
Illuminates the current operation mode.
@ PBC
Indicates the PBC PLAY under play
SVCD or VCD2.0.
# DVD/SVCD
Illuminates the type of a disc loaded on
disc tray.
$ DTS
Indicates the audio type of the disc
under play is DTS.
% AC-3
Indicates the audio type of the disc
under play is DOLBY DIGITAL.
^ AUDIO INDICATION
Illuminates the information of the AUDIO.
& MUTE
Illuminates when MUTE mode.
* REPEAT 1, ALL, A-B
Illuminates when the current play mode
is under repeat title, chapter, track
(single), disc (all), A-B respectively.
( RESUME
Illuminates when RESUME mode.
• 10 •
Downloaded From Disc-Player.com Daewoo Manuals
2 1
) TRACK CALENDAR
Illuminates the information of the
TRACK.
1 OVER
Illuminates the over than 16 track under
play CD or VCD.
2 ROTATION
Rotates when the disc is spinning
3 TITLE/CHAPTER/TRACK
Illuminates the information of the
TITLE, CHAPTER or TRACK of the
DVD and CD disc under play.
4 VOLUME LEVEL
Indicates the volume level of analog
audio output.
PREPARATIONS BEFORE OPERATION (Continued)
NAMES AND LAYOUT OF REMOTE CONTROLS
!
@
#
$
%
^
&
*
(
u U
!
@
OSD
#
SUBTITLE
$
ANGLE
%
^
&
SET UP
MUTE
3D
1
2
3
4
5
6
7
8
9
10+
Y
0/10
V-MODE
INTRO
TITLE.PBC
*
(
)
1
2
3
4
5
6
7
8
9
y
PLAY
REPEAT
P/N
t
R
A-B
RETURN
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
CHANNEL
LANGUAGE
0
b
r
e
E
w
MENU
STEP
T
VOLUME
#
q
=
‘
W
Q
+
“
)
1
2
3
4
5
6
7
8
9
0
“
‘
+
=
Q
q
W
w
E
e
R
r
T
t
Y
y
U
u
STANDBY/ON
OSD
SUBTITLE
ANGLE
SETUP
V-MODE
TITLE.PBC
LEFT DIRECTION
SYSTEM(AUTO/NTSC/PAL)
CONVERT
DOWN DIRECTION
RETURN
MENU
STEP PLAYING
PROGRAM PLAYING
SLOW PLAYING
TIME-SEARCH PLAYING
CHANNEL CONVERT
LOWER TONE
LANGUAGE SWITCH
FAST BACKWARD /
FAST FORWARD SEARCH
ONE CHAPTER/TRACK
PREV/NEXT
PAUSE
STOP
ATONIC TONE
RAISE TONE
MEMORY (RESUME) PLAYING
VOLUME (-/+)
ZOOM PLAYING
A-B
REPEAT PLAYING
PLAY (ENTER)
RIGHT DIRECTION
INTRO
UP DIRECTION
NUMBER (1~ 10+)
OPEN/CLOSE
3D PLAYING
MUTE
• 11 •
Downloaded From Disc-Player.com Daewoo Manuals
PREPARATIONS BEFORE OPERATION (Continued)
REAR PANEL
#
!
%
@
^
$
&
*
! DIGITAL AUDIO COAXIAL/OPTICAL OUT
Connects digital audio under play mode into an AV amplifier or a receiver equipped with
digital audio decoder for you to enjoy the theatre-quality sound in your home.
@ VIDEO OUT
Connects composite video signal to input AV or PHONO sockets of TV or monitor to
achieve high fidelity colour reproduction.
# 5.1 CHANNEL ANALOGUE OUT
In Dolby Digital and dts, total 6 channels are used. 3 channels for front, 2 channels for
surround and 1 channel for subwoofer. They are front left, front right, center, subwoofer,
rear left and rear right. L stands for front left, R for front right, C for center, LFE for
subwoofer, LS for rear left surround and RS for rear right surround.
$ S-VIDEO OUTPUT
Connects to TV or monitor equipped with S-VIDEO input. In order to achieve a sharper and
cleaner picture than that when connected via VIDEO OUT (composite video).
% COMPONENT(Y/Cb/Cr)
Connects to TV or monitor equipped with Component input . In order to achieve a sharper
and cleaner picture than that when connected via VIDEO OUT (composite video).
^ EURO AV JACK
If VIDEO OUT phono is not utilized, the SCART socket can be used to connect to a TV set,
monitor or VCR.
& POWER SUPPLY SOCKET WIRE
Creates POWER between wall outlet and the unit.
* POWER SWITCH
Turn on or off the main power.
- ON : Press “
”.
- OFF : Press “
”.
Notes:
• Remove the dust protection cap from the optical digital audio output connector and connect the
cable firmly so that the configurations of both the cable and connector match.
• Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts
decoder when you set the digital out option of setup information to SPDIF/RAW.
• 12 •
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Turn off all equipment before operation.
The unit has many kinds of output modes like A/V output, S-VIDEO output and
digital signal output (OPTICAL, COAXIAL). You may select as you need.
CONNECTED TO A TV
VIDEO
L AUDIO IN R
1. If the TV has S -VIDEO input, please connect the unit and the TV with S-video cord
(not supplied). You do not have to utilize S-VIDEO but it will give clearer images.
2. Set the unit. You have to set the unit according to the TV connected.
• If the system of the TV is AUTO (multi-system), press P/N and select AUTO.
• If the system of the TV is NTSC, press P/N and select NTSC.
• If the system of the TV is PAL, press P/N and select PAL.
• Connect the unit to a wide-screen TV.
Set the "TV DISPLAY" to "WIDE " in the function setting column.
• Connect the unit to an ordinary TV.
Set the "TV DISPLAY" to "NORMAL/ PS" (Pan scan) or "NORMAL/ LB" (Letter box) in the
function setting column.
• 13 •
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS (Continued)
CONNECTED TO A TV WITH COMPONENT
• If the TV has component input, please connect the unit and the TV with component
cord (not supplied). You do not have to utilize component but it will give clearer images.
Notes:
• In case of connecting the component, press the V-MODE on the remote control to
select YUV.
• When you connect the Composite or S-VIDEO and picture is not displayed, press the
V-MODE on the remote control to check if DVD player position in the video mode.
• 14 •
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS (Continued)
CONNECT TO AN ORDINARY AMPLIFIER
• Optical or coaxial can be selected at your option while connecting
• If you have a DTS decoder of processor, you can enjoy DVD disc or CD sound
decoded by 5.1 channel DTS. ie : 5 surround speakers + 1 woofer
• Refer to page 36 for the setting.
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and
the double-D symbol are trademarks of Dolby Laboratories. Confidential
Unpublished works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
• 15 •
Downloaded From Disc-Player.com Daewoo Manuals
BASIC OPERATIONS
PLAY DISCS
TV/AUDIO SELECTION
1. Press
to turn on the unit.
STANDBY/ON
Press
on the TV and audio
system.
1. Press "TV/VIDEO" on the TV, select
VIDEO mode (TV).
or
2. Press to open the disc tray and load
a disc with the label side.
OPEN/
CLOSE
3. Press again to close the disc tray.
The unit begins to read the disc.
OPEN/
CLOSE
or
TV/VIDEO
• Select S-VIDEO mode if using an ‘S’
Video connection.
2. Select the right audio input on the
amplifier.
• Each amplifier is different from
another, please refer to the manual of
the amplifier.
(e.g., connect the audio output of the
DVD player to the DVD audio input of
an amplifier.)
- FRONT PANEL -
- REMOTE CONTROL -
4. Press
to play the disc.
AFTER STEP4 IS FINISHED:
• PLAY DVD
The TV screen shows the DVD
menu and title menu.
• PLAY SUPER-VCD, VCD2.0
The TV screen shows the menu, the
unit enters PBC status.
• PLAY CD, VCD1. 1 , MP3
PLAY
Press
, the unit plays the disc
according to the track numbers.
5. Stop playback.
Press .
• You have to press this
button twice to stop
the playback of a
DVD.
PLAY
STOP
DVD/LD
Notes: This step can be cancelled if
you do not connect it to the amplifier.
STOP
6. Unload the disc and
turn off the unit. Press
and
STANDBY/ON
again.
Notes: If the power is not turned on,
check whether the power switch on
the rear of DVD is turned on.
• 16 •
Downloaded From Disc-Player.com Daewoo Manuals
BASIC OPERATIONS (Continued)
STEP, PAUSE
SYSTEM SETTING
According to the system of the TV to be
connected ,set the system of the unit to
make it match the TV.
Press STEP .
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
VOLUME
INTRO
TITLE.PBC
b
CHANNEL
#
LANGUAGE
PLAY
REPEAT
P/N
A-B
RETURN
MENU
STEP
ZOOM
1. If the system of the TV is NTSC
: Press P/N , select NTSC.
The screen shows:
• WHEN PLAYING DVD PICTURES, VCD
Press STEP to make the playback
step. Pressing STEP again moves the
picture forward frame by frame.
NTSC
STEP
2. If the system of the TV is PAL
:Press P/N , select PAL.
The screen shows:
PAL
• WHEN PLAYING MUSIC CD, MP3
Press
to make the playback pause.
Press
to resume playback.
PLAY
OSD
3. If the TV is multi-system
: Press P/N , select AUTO.
The screen shows:
Press OSD , when the unit is operated,
the TV screen shows the operation
functions and information about the
disc.
AUTO
MUTE
3D
OSD
1
2
3
4
5
6
7
8
9
10+
0/10
SUBTITLE
ANGLE
SET UP
• Remove the OSD, press OSD 4 times.
• 17 •
Downloaded From Disc-Player.com Daewoo Manuals
BASIC OPERATIONS (Continued)
VOLUME CONTROL (EXCEPT SPDIF/RAW)
• Press VOLUME on the TV or
amplifier to adjust the volume.
• Press VOLUME on the remote control.
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
MP3 PLAY
1. When an MP3 disc is loaded, MP3
menu screen is displayed automatically
depending on MP3 disc’s folder
(directory) structure as shown below.
VOLUME
SMART NAV1
CHANNEL
b
#
CD-1
CD-2
CD-3
LANGUAGE
1. Press + to raise the volume.
+
2. Press - to lower the volume.
DVD MENU PLAY
Some DVDs have title menus and chapter menus.
1. Press MENU or TITLE , the screen
shows the menu.
Use direction buttons to select the
desired item, then press
.
2. Press TITLE once to return to the title
menu; press it again to return to
the current playback.
Press MENU once to return to the root
menu; press it again to return to the
current playback.
PLAY
Notes:
appears on the TV screen by
• When
pressing TITLE . The disc does not have
the title list in the menu.
• When
appears on the TV screen
by pressing MENU . The disc does not
have the menu.
• 18 •
Downloaded From Disc-Player.com Daewoo Manuals
CD-1
MP3 01-ABC
MP3 02-BCE
MP3 03-EIC
MP3 04-FGH
MP3 05-ADC
0
1
2
3
4
5
2. Use the direction button to select the
folder you want to play, by pressing the
PLAY button. This button allows, you
to see the file lists under the folder.
3. Use the direction button and select an
MP3 title using the PLAY button then
play will start automatically. When you
know the title number, enter the MP3
title number using the numeric buttons
on the remote control and then press
the PLAY button.
4. Press NEXT button on the remote
control to choose next title. Press
PREV button for previous title. When
you know the title number, enter MP3
title number using the numeric buttons
on the remote control and then press
the PLAY button.
OTHER FUNCTIONS
When playing a MP3 disc, the unit has
functions like mute, volume control, pause,
previous/next track, repeat and channel
selection. You may operate as you do with a
CD.
BASIC OPERATIONS (Continued)
PBC PLAY
When playing a super-VCD or VCD2.0,
you can enjoy the basic interactive
function.
Example: VCD2.0
1. Press , the screen shows the home
menu.
2. Press number buttons to select.
Example: select home menu1.
3. The screen shows the sub-menu after
the unit enters home menu1.
4. Press
,
to see the previous or
next page.
5. Press number buttons to select submenus.
6. Press RETURN to return to the submenu, press it again to return to the home
menu.
SELECT WITH NUMBER
BUTTONS (IN CASE OF CD)
Load a disc. Press number buttons to
select tracks after the unit finishes reading
the disc.
1. If the track number is less than 10,
just press buttons 1-10.
Example: press 8 to select track 8.
8
The screen shows:
SELECT 08
00:00:21
2. If the track number is over 10, press
10+ once and a button among 1-10.
Example: if you select track 12, press
10+ once and button 2.
10+
+
2
The screen shows:
SELECT 12
00:00:00
EXCHANGE DISCS
1. Press
to open the disc tray.
2. Unload the disc and load another one.
3. Press
again to close the disc tray.
• 19 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS
SELECT LANGUAGE
WHEN PLAYING DVD
Press LANGUAGE , the screen shows as
below.
AUDIO 1/2:AC-3 2CH ENGLISH
Note:
• Different discs differ in languages.
• CHANNEL works when playing a
super-VCD, you may select mono
channel (left or right) or stereo.
• As to a two-language fiction VCD,
you may press LANGUAGE to select
a needed language.
MUTE
Press LANGUAGE again.
AUDIO 2/2:AC-3 5.1CH ENGLISH
When playing a disc, this function can
remove the sound.
1. REMOVE SOUND
Press MUTE , the screen shows
"MUTE".
MUTE
MUTE
Different discs differ in languages.
SELECT CHANNEL
WHEN PLAYING CD
CHANNEL
MONO LEFT
2. RESUME SOUND
Press MUTE again.
MUTE OFF
CHANNEL
MONO RIGHT
CHANNEL
STEREO
You may select one mode.
• 20 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
FAST PLAY
When playing a disc, you may play it
in Cue or Review mode to find what you
want.
WHEN PLAYING SUPER-VCD or VCD
1. Press
to play forward fast.
Each time you press the button, the
screen shows in order:
WHEN PLAYING DVD
1. Press
to play forward fast.
Each time you press the button, the
screen shows in order:
PLAY
FF 1X
2
FF 2X
3
FF 3X
1
FF 2X
4
FF 4X
2
FF 4X
5
PLAY
3
FF 8X
4
FF 16X
5
FF 32X
6
PLAY
2. Press
to reverse the disc fast.
Each time you press the button, the
screen shows in order:
2. Press
to reverse the disc fast.
Each time you press the button, the
screen shows in order:
3. Press
play.
1
1
FR 2X
2
FR 4X
3
FR 8X
4
FR 16X
5
FR 32X
6
PLAY
to switch back to normal
1
FR 1X
2
FR 2X
3
FR 3X
4
FR 4X
5
PLAY
WHEN PLAYING CD, MP3
1. Press
to play forward fast.
2. Press
to reverse the disc.
3. Release
(or
) to play normally.
Notes: In case of fast play (DVD)
mode , slow play mode or step mode,
the sound is muted.
• 21 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
SLOW PLAY
REPEAT PLAY
Enjoy slow motions by the following
steps.
A-B
RETURN
MENU
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
This function can be used to repeatedly
play a title, chapter, track, disc or some
parts on a disc.
PLAY
VOLUME
REPEAT
P/N
b
CHANNEL
#
REPEAT
A-B
RETURN
LANGUAGE
MENU
A-B
WHEN PLAYING DVD
1. Press SLOW to play slowly.
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
CHANNEL
SLOW
b
VOLUME
#
PLAYING A DISC REPEATEDLY
DVD
The screen shows in order:
SF 2X
SF 4X
SF 8X
SR 2X
SR 4X
SR 8X
You may repeat a title or chapter.
1. Repeat a chapter.
Press REPEAT , the screen shows:
"CHAPTER REPEAT ON".
REPEAT
2.Press
PLAY
CHAPTER REPEAT ON
to play normally.
WHEN PLAYING SUPER-VCD or VCD
1. Press SLOW to play slowly. The unit
has three steps for slow play.
The screen shows orderly.
SLOW
2.Press
PLAY
1
SF 1X
2
SF 2X
3
SF 3X
4
PLAY
to play normally.
2. Repeat a title
Press REPEAT , the screen shows:
“TITLE REPEAT ON”
REPEAT
3. Remove "REPEAT" function.
Press REPEAT , to remove the display
on the screen.
CHAPTER REPEAT ON
• 22 •
Downloaded From Disc-Player.com Daewoo Manuals
TITLE REPEAT ON
TITLE REPEAT ON
REPEAT OFF
PLAY DISCS IN VARIOUS WAYS (Continued)
REPEAT SOME PARTS (EXCEPT MP3)
Super-VCD, VCD, CD, MP3
• You may repeat a track, a disc
according to the following steps
• VCD 1.1 and CD can play repeatedly
directly.
• Super VCD and VCD 2.0 can play
repeatedly in PBC OFF mode.
• After the unit stops, press number
buttons directly to select tracks.
You may press A-B to enjoy some parts
repeatedly when playing a disc.
PLAY DVD, SUPER-VCD, VCD, CD
1. Set a starting point A.
The screen shows:
A-B
A TO B SET A
1. Repeat one track
Press REPEAT , the screen shows:
"REP- ONE".
REPEAT
REP-ONE
2. Set an end point B.
The screen shows:
A-B
2. Repeat a CD
Press REPEAT , the screen shows:
"REP- ALL".
REP- ALL
REPEAT
3. Remove "REPEAT" function.
Press REPEAT , to remove the display
on the screen.
Afterwards, the unit plays from A to B.
3. Remove A-B repeat
The screen shows:
A-B
A TO B CANCELLED
REPEAT OFF
REPEAT
REP- ONE
A TO B SET B
REP- ALL
REPEAT OFF
• 23 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
SELECT SUBTITLES
When playing a multi-subtitle DVD or
super-VCD, you may select one subtitle
to show it on the screen.
OSD
1
2
3
4
5
6
7
8
9
10+
0/10
SUBTITLE
SUPER-VCD
A super-VCD has only four channels for
recording, so it has four subtitles at the
most.
Press SUBTITLE , the screen shows
orderly:
ANGLE
SUBTITLE
SET UP
WHEN PLAYING DVD
1. Press SUBTITLE to select one.
The screen shows:
SUBTITLE 01/03:ENGLISH
2. Remove the subtitle.
Press SUBTITLE until the screen
shows "SUBTITLE OFF".
Notes:
• For some discs, subtitles can not be
removed.
• Different discs differ in the
languages of subtitles.
• If the subtitles of discs can not be
selected, press SUBTITLE , the
screen shows forbidden mark
.
• 24 •
Downloaded From Disc-Player.com Daewoo Manuals
1
SUBTITLE 01/04
2
SUBTITLE 02/04
3
SUBTITLE 03/04
4
SUBTITLE 04/04
5
SUBTITLE OFF
You may select a subtitle as you need.
Some discs may not have "SUBTITLE OFF"
function.
PLAY DISCS IN VARIOUS WAYS (Continued)
SELECT ANGLES
3D SURROUND
Some discs have images with different
screen angles, you may select among
them. For example,when you watch a
running train, you may select to watch it
from the front, the left window or the
right window without stopping it.
This function outputs 3D effects on the
stereo audio analog output 3D effects are
broken down into 4 surround modes.
MUTE
3D
OSD
1
OSD
1
2
3
SUBTITLE
4
5
6
ANGLE
SUBTITLE
2
3
4
5
6
7
8
9
ANGLE
7
9
8
SET UP
10+
0/10
V-MODE
INTRO
TITLE.PBC
Example:
A DVD has four screen angles at your
option.
1. Press ANGLE to select ANGLE1.
1. Press 3D button.
3D SURROUND MODE 1 is
displayed on TV screen. And analog
stereo output is changed to surround
mode 1.
3D SURROUND 1
SCREEN
1/4
2. Press 3D button again.
Press the 3D button continuously until
the desired 3D sound mode is selected.
2. Press ANGLE to select other angles ,
the screen shows respectively:
2/4 (select ANGLE2)
3/4 (select ANGLE3)
Notes: This 3D function is operated
in case only that the AUDIO
OUTPUT is set to the ANALOG or
SPDIF/PCM.
4/4 (select ANGLE4)
3. Resume normal playback. Press
ANGLE until there is no display on
the screen.
• 25 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
TIME SEARCH AND REMAINING TIME
2. Time search
• Press A-TIME until the screen
shows:
MENU
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
CHANNEL
b
VOLUME
A-TIME
#
TITLE 02/03 TIME : :
LANGUAGE
TIME SEARCH
You may directly enter a time, title or
chapter number to search fast on a disc,
the unit plays from the point entered.
PLAY DVD
1. Search a title or a chapter.
Example: Search chapter 2 in title 2.
• Press A-TIME , the screen shows:
If not A-TIME operation, press the
TITLE/PBC button.
TITLE 03/03 CHAPTER 01 /04
• Press the left or right button and
move the cursor to illuminate the title
number. The screen shows:
• Press number buttons to enter hour,
minute and second.
Example: Enter 0, 1, 0, 2, 3, 8
After setting, the disc is played from
01:02:38.
PLAY SUPER-VCD, VCD, CD
You can only enter a time to search the
content from that time.
Example: Play from 01:38 of track 6.
1. Press button 6 to select track 6. The
screen shows:
SELECT: 06
2. Press A-TIME , the screen shows:
TITLE 03/03 CHAPTER 01 /04
GO TO _ _ : _ _
• Press button 2 to select title 2, the
screen shows:
TITLE 02/03 CHAPTER 01 /04
• Repeat the steps above, select
chapter 2 in title 2.
TITLE 02/03 CHAPTER 02 /04
• 26 •
Downloaded From Disc-Player.com Daewoo Manuals
3. Press button 0, 1, 3, 8 to enter the time.
The screen shows:
GO TO 01:38
• The unit plays from 01:38 of track 6
after setting.
• Press 0/10 to enter 0.
PLAY DISCS IN VARIOUS WAYS (Continued)
REMAINING TIME
This function can be used to know the
remaining time of a title, chapter or track.
2. Press OSD , the screen shows the
remaining time of the track.
DVD
1. Press OSD , the screen shows the
remaining time of the title.
OSD
SINGLE REMAIN
00:01:25
TITLE REMAIN
00:56:45
3. Press OSD , the screen shows the
playing time of the track.
2. Press OSD , the screen shows the
playing time of the chapter.
OSD
TOTAL ELAPSED
00:04:25
CHAPTER ELAPSED
00:02:41
4. Press OSD again, the screen shows the
remaining time of the disc.
3. Press OSD , the screen shows the
remaining time of the chapter.
OSD
TOTAL REMAIN
00:33:23
CHAPTER REMAIN
00:01:19
5. Press OSD once more, the screen
shows:
SUPER-VCD, VCD, CD
OFF
Example: Check the remaining time
when playing track 2.
1. Press OSD , the screen shows the
playing time of the track.
SINGLE ELAPSED
00:04:23
• 27 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
RESUME PLAY
The unit can memorize the last point
where it stops and resume playback from
there.
WHEN PLAYING CD
ZOOM PLAY
This function can be used to enjoy a
motion or motionless picture.
A-B
RETURN
MENU
1. Press STOP to stop playing.
STEP
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
CHANNEL
b
VOLUME
#
DVD/SUPER-VCD/VCD
2. Press MEMORY to resume playback.
MEMORY
1. Press ZOOM when playing a DVD, the
screen shows:
ZOOM X1.5
The picture is enlarged 1.5 times as big.
2. Press ZOOM again. the screen shows:
Notes:
1. This function does not work for any
programmed playback.
2. This function is removed when the
disc is unloaded or the unit is off.
ZOOM X2
The picture is enlarged twice as big.
3. Press ZOOM again. the screen shows:
ZOOM X4
The picture is enlarged four times as
big.
4. Press , , , to move the enlarged
picture.
5. To resume the picture, press ZOOM
once more, then screen shows
“ZOOM OFF”.
• 28 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
PROGRAM PLAY (VCD, AUDIO CD only)
You may program the tracks on a disc
and play them in the programmed order.
A-B
RETURN
PROGRAM
ZOOM
SLOW
A-TIME
MEMORY
to start playing.
VOLUME
b
CHANNEL
PLAY
4. Press PROGRAM twice to remove
program play.
MENU
STEP
3. Press
DIGEST PLAY (VCD, AUDIO CD only)
#
WHEN PLAYING SUPER-VCD, VCD, CD
1. After the unit stops, press PROGRAM to
select.
PROGRAM
SET UP
10+
0/10
V-MODE
INTRO
TITLE.PBC
PLAY
REPEAT
P/N
WHEN PLAYING SUPER-VCD, VCD
1. Press INTRO after the unit stops.
The screen shows:
INTRO
PROGRAM P00:00
2. Press number buttons in order, according
to the track to be programmed.
Example: Press 2, 4, 6, 8.
The screen shows:
1. INTRO
2. DISC
3. TRACK
4. EXIT
screen
2
PROGRAM P01:02
..
.
.
.
.
8
2. Press number buttons to select a digest
mode.
Press button 1 for intro mode.
1
PROGRAM P04:08
The unit plays each scene for about 10
seconds.
Notes:
P* * : *
*
3. Press button 2 for disc digest.
track number
program order
2
• 29 •
Downloaded From Disc-Player.com Daewoo Manuals
PLAY DISCS IN VARIOUS WAYS (Continued)
The unit shows the starting picture of all
the scene on the screen simultaneously.
SCENE01 SCENE02 SCENE03
SCENE08 SCENE09 SCENE04
The unit divides scene 3 into nine parts
and shows the starting picture of each
part on the screen.
1
8
7
2
9
6
3
4
5
SCENE07 SCENE06 SCENE05
5. Press button 4 to exit from digest play.
If the scene number is more than 9,
press
to look at the next picture.
4. Press number buttons to select a track.
Press button 3 for scene digest.
3
Press
to select a track.
• 30 •
Downloaded From Disc-Player.com Daewoo Manuals
6. Remove digest play.
Press , digest play is removed and the
unit stops.
PLAY DISCS IN VARIOUS WAYS (Continued)
PLAY KARAOKE
WHEN PLAYING CD
1. Press INTRO after the unit stops.
INTRO
Load a karaoke disc and play it.
1. Set karaoke disc and play it.
2. Insert the microphone into MIC1 or
MIC2.
MIC1
MIC2
The screen shows:
1. INTRO
2. ----
3. ---4. EXIT
3. Turn knob “MIC LEVEL” and
“ECHO” to obtain the needed degree.
2. Press number buttons to select a digest
mode.
Press button 1 for intro mode.
1
ECHO
MIC LEVEL
MIN
MIN
MAX
MAX
4. Push number buttons to select tracks.
The unit plays the first 15 seconds of
each track one after another.
Press
,
to play the first 15
seconds at the previous or next track.
3. Press button 4 to exit from digest play.
KEY CONTROL
You may change the pitch to adapt to
your voice.
1. Push
to raise the pitch.
#
4
4. Remove digest play.
Press , digest play is removed and the
unit stops.
Each time you push the button, the pitch
is raised by one step. It can be raised by 7
steps at the most.
2.Push
to lower the pitch.
b
Notes : CD only has “INTRO” function.
Each time you push the button, the pitch
is lowered by one step. It can be raised by
7 steps at the most.
• 31 •
Downloaded From Disc-Player.com Daewoo Manuals
FUNCTION SETTING
DVD MENU SETTING
The screen shows:
According to the recorded information
and external equipment,set the following
functions for DVD to obtain the best
playing status.
8
9
10+
0/10
7
-- DOLBY DIGITAL SETUP -OP MODE
LINE OUT
DUAL MONO
DYNAMIC
MAIN PAGE
SET UP
V-MODE
INTRO
TITLE.PBC
1. Press SETUP to set the main menu.
SETUP
The screen shows:
After entering the menu, the unit
automatically selects a column.
• Press the direction button
to
select "DUAL MONO".
The screen shows:
-- DOLBY DIGITAL SETUP -OP MODE
DUAL MONO STEREO
DYNAMIC
L-MONO
R-MONO
MIX-MONO
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
DOLBY SURROUND SETUP
PREFERENCES
EXIT SETUP
2. Press direction buttons ( , ) and press
to confirm.
Example: Set "DUAL MONO" in "DOLBY
DIGITAL SETUP" to "LEFT MONO".
• Press direction button to select. The
screen shows:
PLAY
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
DOLBY SURROUND SETUP
PREFERENCES
EXIT SETUP
MAIN PAGE
Press direction button
"L- MONO"
• Press
to confirm and enter
"DOLBY DIGITAL SETUP ".
• 32 •
Downloaded From Disc-Player.com Daewoo Manuals
to select
The screen shows:
-- DOLBY DIGITAL SETUP -OP MODE
DUAL MONO STEREO
DYNAMIC
L-MONO
R-MONO
MIX-MONO
MAIN PAGE
• Press
PLAY
to confirm.
PLAY
PLAY
,
FUNCTION SETTING (Continued)
3.Exit from menus.
Using direction buttons go to
“ MAIN PAGE” menu, then press
The screen shows.
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
DOLBY SURROUND SETUP
PREFERENCES
TV DISPLAY
PLAY
.
1. NORMAL/ PS (PAN SCAN)
This is selected when the unit is
connected with a normal TV.
Wide- screen images are shown on the
screen, but with some parts cut
automatically.
EXIT SETUP
• To select “GENERAL SETUP” menu,
press
.
PLAY
GENERAL SETUP
The setting structure is as follows:
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
AUDIO OUT
CAPTIONS
SCR SAVER
>> NORMAL/PS
NORMAL/LB
WIDE
>> AUTO
NTSC
PAL
>> AUTO
HI-RES
N-FLICKER
>> ON
OFF
>> ENGLISH
FRENCH
SPANISH
>> ANALOG
SPDIF/RAW
SPDIF/PCM
>> ON
OFF
>> ON
OFF
2. NORMAL / LB (LETTER BOX)
This is selected when the unit is
connected with a normal TV. Widescreen images are shown on the screen,
with black belt on the top and bottom.
3. WIDE
This is selected when the unit is
connected with a wide-screen TV.
MAIN PAGE
• 33 •
Downloaded From Disc-Player.com Daewoo Manuals
FUNCTION SETTING (Continued)
TV TYPE
You may select according to the colour
system of the TV to be connected.
• Select "AUTO" for a multi-system TV.
• Select "NTSC" for a NTSC TV.
• Select "PAL" for a PAL TV.
PIC MODE
• Select "AUTO" for automatically setup.
• Select "HI-RES" for high-resolution picture.
• Select "N-FLICKER" for no flicker picture.
ANGLE MARK
This only works when there is an angle
mark on the disc.
• Select "ON",the screen shows the mark
when playing a DVD.
• Select "OFF",the mark is not shown.
OSD LANGUAGE
• ENGLISH
The OSD is in English.
• FRENCH
The OSD is in French.
• SPANISH
The OSD is in Spanish.
AUDIO OUT
• ANALOG: No signal is output from the
coaxial and optical port.
• SPDIF/RAW: Select this when the DVD
player is connected with a power
amplifier through coaxial port, refer to
page 15. When a Dolby Digital DVD,
DTS DVD or MPEG DVD is played,
the coaxial port will output in the
corresponding digital(Source code)
format. The power amplifier to be
connected must have Dolby Digital,
DTS and MPEG decoding.
• SPDIF/PCM: Select this when the DVD
player is connected with a 2-channel
digital mode or stereo amplifier (refer
to page 15 for the connection). When a
Dolby Digital or MPEG DVD is
played, the coaxial port will output in
PCM 2-channel format.
Notes:
In case of selecting SPDIF/RAW or
SPDIF/PCM, no signal is output from the
audio analog output.
CAPTIONS
CAPTION was invented for hearing
impaired person. But it is very useful
when learning foreign languages. If your
TV supports closed caption, select ON. If
not, closed caption won’t be displayed.
• ON : The hidden subtitle is shown.
• OFF : The hidden subtitle is turned off.
SCREEN SAVER
Start the screen saver, the screen saver
image appears when the unit stops or
the image is frozen for a few minutes.
This saver can keep the screen from
being damaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
• 34 •
Downloaded From Disc-Player.com Daewoo Manuals
FUNCTION SETTING (Continued)
SPEAKER SETUP
The setting structure is as follows :
- -SPEAKER SETUP PAGE - DOWNMIX
CENTER
REAR
SUBWOOFER
CNTR DELAY
REAR DELAY
TEST TONE
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
LT/RT
STEREO
VSS
OFF
ON
OFF
ON
OFF
ON
OFF
5MS
3MS
1MS
OFF
15MS
9MS
3MS
OFF
ON
OFF
DOWNMIX (Dolby Digital DVD disc only)
DOWNMIX is used to reproduce the proper
analog audio when the audio channel
recorded on the disc differs from the output
audio channel configuration. Assume that 5.1
channels audio are recorded on the disc but
you can receive only stereo audio channels. In
this case downmix is unavoidable and you
will hear all the channels recorded on disc. If
you are using Dolby Surround Pro Logic
decoder, please set the downmix mode to
LT/RT. And the last sub item stereo makes the
downmixing operation stops. This means that
you are using the full 5.1 channel audio
system. If you don’t have an amplifier, which
have Dolby Digital, dts decoder or 5.1
channel analog audio input, do not select this
stereo sub item. If you do that you may hear
the front stereo sound only. Select this stereo
sub item when you are going to use the full
5.1 channel analog audio with your amplifier.
CENTER
This submenu is valid when you are
using an amplifier, which have the 5.1
channel analog audio Input. If you have
the center speaker, please turn the sub
item ON. If not, turn OFF. If you are
going to adjust the center delay, please
turn the sub item ON. If not, you can’t
adjust the center delay.
REAR
This submenu is valid when you are
using an amplifier, which have the 5.1
channel analog audio Input. If you have
the rear speaker, please turn the sub item
ON. If not, turn OFF. If you are going to
adjust the rear delay, please turn the sub
item ON. If not, you can’t adjust the rear
delay.
SUBWOOFER
This submenu is valid when you are using
an amplifier, which have the 5.1 channel
analog audio Input. If you have the
subwoofer speaker, please turn the sub
item ON. If not, turn OFF.
CNTR DELAY
You can adjust the sound in home by
adding delay time to the center speaker.
See REAR DELAY for more information.
• 35 •
Downloaded From Disc-Player.com Daewoo Manuals
FUNCTION SETTING (Continued)
SPEAKER SETUP
DOLBY DIGITAL SETUP
The setting structure is :
REAR DELAY
Like CNTR DELAY, you can adjust the
sound in home by adding delay time to
the rear speaker. You may hear the best
quality sound if the distance between
speakers is same when playing 5.1
channel surround sounds. But the
displacement of speakers with same
distance is very difficult in real. Please
refer the following figure and table, set
the appropriate delay time.
Df-Dc(cm) Value(ms)
Df<=Dc
OFF
34
1
Center
68
2
Speaker
102
3
Delay
136
4
170
5
Df-Ds(cm) Value(ms)
Df<=Ds
OFF
102
3
Rear
204
6
Speaker
306
9
Delay
408
12
510
15
Ideal Front Speaker
Ideal Surround Speaker
• 36 •
Downloaded From Disc-Player.com Daewoo Manuals
- -DOLBY DIGITAL SETUP PAGE - OP MODE
DUAL MONO
DYNAMIC
>> LINE OUT
>> STEREO
L-MONO
R-MONO
MIX-MONO
>> FULL
6/8
4/8
2/8
OFF
MAIN PAGE
OP MODE
• LINE OUT: Compress input signals
linearly.
DUAL MONO
There is the output mode of the L and
R signals of the set audio output. If it is
set to "MIX-MONO", the function only
works when the DVD being played is
5.1-channel.
DYNAMIC
When the compression mode is set to
"LINE OUT", this is selected to adjust
linear compression rate to obtain the
different compression results of the
signals.
FUNCTION SETTING (Continued)
DOLBY SURROUND SETUP
The setting structure is :
- -DOLBY SURROUND SETUP- SURROUND
PREFERENCES
The setting structure is :
AUDIO
>> ENGLISH
FRENCH
SPANISH
GERMAN
ITALIEN
THAI
SUBTITLE
>> ENGLISH
FRENCH
SPANISH
GERMAN
ITALIEN
THAI
OFF
DISC MENU
>> ENGLISH
FRENCH
SPANISH
GERMAN
ITALIEN
THAI
PARENTAL
>> 1. G
2.
3. PG
4. PG 13
5.
6. PG-R
7. NC-17
8. ADULT
NO PARENTAL
PASSWORD
>> CHANGE
>> OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
DEFAULTS
>> RESET
>> OFF
ON
AUTO
SURROUND
If you are using Dolby surround decoder,
please set the surround mode to ON.
And the other item OFF makes the Dolby
surround operation stops.
This means that you are using the 2
channel audio system.
If you want to automatically setup, select
last sub item AUTO.
MAIN PAGE
Notes:
To enter into the preference setting mode
during the play, press the STOP button twice.
• 37 •
Downloaded From Disc-Player.com Daewoo Manuals
FUNCTION SETTING (Continued)
SELECT LANGUAGE
If a language mentioned above is
recorded on the disc, you can select
audio, subtitle or disc menu languages. If
not, the language recorded on the disc is
shown.
PARENTAL
The content of a disc with lock function
is evaluated by grades.
You may select an age control grade as
you need.
Example: Select "G", the scenes of
violence inadvisable are not
played to children.
For adults, the screen suggests you enter
the code after pressing
,
you can watch if the password is right.
Notes: The password is set by yourself
PLAY
PASSWORD
- -PASSWORD SETUP - PASSWORD >>CHANGE>> OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
Select this to adapt the code, the
screen shows:
PASSWORD CHANGE PAGE
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
Enter a password according to the screen.
Notes:
The password is 3308 when the unit
is turned on initially or you forget the
password.
DEFAULTS >> RESET
Each function setting returns to the initial
status in the factory if you select this.
• 38 •
Downloaded From Disc-Player.com Daewoo Manuals
TROUBLESHOOTING
If you experience the following problems
while using the unit, this troubleshooting
guide can help you.
No sound
• Check if you press the MUTE.
• Check if the unit is properly connected.
• Make sure you operate the TV or
amplifier correctly.
• Make sure the DVD player or the
amplifier position is properly selected .
• Make sure the audio output is set
properly . (Check the audio output mode
of the general setup in Setup menu)
• Check whether the disc plays in slow or
fast forward (or reverse) mode.
No image
• Check if the unit is properly connected.
• Make sure you operate the TV correctly.
• Make sure you set the colour system
correctly.
Disc can not be played
• There is no disc in the unit.
• Insert the disc on the disc tray properly
with the label side up.
• Clean the disc.
• Moisture has condensed in the unit.
Remove the disc and leave the unit on
for about one hour.
• Make sure that the area code of disc is 3
or All. (In case of DVD, it may not play
the disk which come from abroad.)
Remote control does not work
• Remove barriers between the remote
control and the unit.
• Point the remote control at the remote
control sensor of the unit.
• Replace the batteries with new ones.
• Reference page 8.
Bad sound quality
• Make sure the audio output mode is set
correctly.
• Make sure the audio connection
between the unit and amplifier is right.
• Check whether the disc is dirty or
damaged.
Image rolls and no colour
• The colour system set by this unit does
not match with that of TV. Press
P/N on the remote control to select
the correct one.
• Check whether the disc is dirty or
damaged.
• 39 •
Downloaded From Disc-Player.com Daewoo Manuals
TECHNICAL SPECIFICATIONS
Laser
Television signal
Frequency response
wavelength 650nm
PAL
20Hz ~ 20KHz
Audio Signal/noise ratio
≥ 90dB (At 1KHz, JIS A-Weighted)
Audio distortion + noise
≤ - 60dB (At 1KHz, 0dB)
Channel separation
≥ 90dB ( 1KHz)
Dynamic range
≥ 85dB ( 1KHz)
Analog
output level : 2.0 ± 0.2Vrms
(Load impedance : 10KΩ)
Output
Audio
Digital
output level : 0.5 ± 0.1Vp-p
(Load impedance : 75Ω)
Composite
output level : 1.0 ± 0.2Vp-p
(Load impedance : 75Ω, imbalance, negative polarity)
Output
Video
output level : brightness (Luma) 1.0 ± 0.2Vp-p
S-video
Component
Power supply
Power consumption
Dimensions (W x H x D)
Net Weight
chromaticity (Clor) 0.286 ± 20% (Load impedance : 75Ω)
0.7Vp-p (Load impedance : 75Ω)
A C1 00 ~2 4 0V, 5 0 /60 Hz
< 25 W
430 x 76.5 x 277 mm
Around 4.5Kgs
Notes : Design and specifications in this owner’s manual are subjected to change
without prior notice to improve quality and function.
• 40 •
Downloaded From Disc-Player.com Daewoo Manuals
REGIONAL RESTRICTION CODE
Regional restriction codes are built in this DVD player model and all DVD discs for
each sales region throughout the world. If regional code of this DVD player does not
match with regional code of DVD disc that you want to playback, if won’t work. The
regional code number can be found the diagram below .
• 41 •
Downloaded From Disc-Player.com Daewoo Manuals
DVD Player
OWNER’S MANUAL
DVG-8000D
TITLE
PBC SETUP LANG
OPEN/
CLOSE
PLAY
6
3
2
1
STOP
STANDBY/ON
7
8
5
4
9
0/10
10+
DVD/VCD/SVCD/DVCD/CD/MP3/CD-R/CD-RW
II/STEP
CHANNEL
RETURN
MIC LEVEL
MIC1
SEARCH
MIN
Downloaded From Disc-Player.com Daewoo Manuals
ECHO
MIC2
SKIP
MAX
MIN
MAX
DAEWOO GUARANTEE CONDITIONS
This product is guaranteed for 12 months from the date of original purchase. Any defect that
arises due to faulty materials or workmanship will be repaired free of charge during this
period by the dealer from whom you purchased the unit. The guarantee is subject to the
following provisions.
The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or
consumable items such as batteries, drive belts or bulbs.
The product must be correctly installed and operated in accordance with the instructions
contained in the manual. It must be used solely for domestic purposes. For further
information regarding your guarantee please see the section at the rear of your user manual.
The guarantee will be rendered invalid if the product is resold or has been damaged by
inexpert repair.
DAEWOO disclaims any liability for incidental or consequential damages.
The guarantee is in addition to and does not diminish your statutory or legal rights.
In the event of a breakdown please refer to your instruction manual and check all plugs,
fuses and electricity supply.
In the event of there being no breakdown you will be charged for the repair.
• 42 •
Downloaded From Disc-Player.com Daewoo Manuals
Download PDF