Yaesu VX-8R radio Instruction manual
Below you will find brief information for radio VX-8R. This document describes the radio VX-8R and explains how to modify the radio to transmit on frequencies outside of the Amateur bands. This manual also includes information on how to remove and replace the battery, which is necessary for the modification. This document also includes a description of the Bluetooth option.
Advertisement
Advertisement
Advertisement
Key features
- TX Mod
- Out of band TX
- Bluetooth option
- Waterproof integrity
- Battery removal
- Resistor removal
- Cover replacement
Frequently asked questions
You can modify the radio to transmit on frequencies outside of the Amateur bands by removing a resistor on the circuit board. To do this, you must remove the battery, remove the plastic cover, and then remove the resistor. After you put the battery back in, the radio will have reset, and you will lose all of your settings.
The Bluetooth option allows you to connect the radio to a Bluetooth headset or other Bluetooth device. It is the same cover you need to lift to install this option.
After you put the battery back in, the radio will have reset, and you will lose all of your settings. You will have to re-enter all of your settings.