Advantech | PCI-1710UL | Signal Conditioning Modules and Terminal Boards

Signal Conditioning
Modules and Terminal
Boards
20
Isolated Signal Conditioning Modules
ADAM-3000 Series
Isolated Signal Conditioning Modules
20-3
ADAM-3011
ADAM-3013
ADAM-3014
Isolated Thermocouple Input Module
Isolated RTD Input Module
Isolated DC Input/Output Module
20-4
ADAM-3016
ADAM-3112
ADAM-3114
Isolated Strain Gauge Input Module
Isolated AC Voltage Input Module
Isolated AC Current Input Module
20-5
Terminal Board Selection Guide
20-6
Isolated Digital I/O Terminal Boards
ADAM-3854
ADAM-3864
4-ch Power Relay Module
4-ch Solid State Digital I/O Module Carrier Backplane
20-8
I/O Wiring Terminal Boards
PCLD-782/B
PCLD-785/B
PCLD-885
16/24-ch Opto-Isolated Digital Input Board
16/24-ch Relay Board
16-ch Power Relay Board
20-9
PCLD-8751
PCLD-8761
PCLD-8762
48-ch Opto-Isolated Digital Input Board
24-ch Opto-Isolated DI and 24-ch Relay Output Board
48-ch Relay Output Board
20-10
PCLD-786
PCLD-7216
8-ch SSR I/O Module Carrier Board
16-ch SSR I/O Module Carrier Board
20-11
PCLD-8710
PCLD-8712
DIN-rail Wiring Terminal Board with CJC Circuit
DIN-rail Wiring Terminal for PCI-1712/L
20-12
PCLD-788
16-ch Relay Multiplexer Board
20-13
PCLD-789D
Amplifier and Multiplexer Board
20-14
To view all of Advantech’s Signal Conditioning Modules and Terminal Boards,
please visit www.advantech.com/products.
ADAM-3000 Series
Features
ƒ 1,000 VDC three-way isolation
ƒ Easy input/output range configuration
ƒ Flexible DIN-rail mounting
ƒ Linearized thermocouple/RTD measurement
ƒ Low power consumption
ƒ Wide input bandwidth
Introduction
The ADAM-3000 Series consist of the most cost-efficient,
field configurable, isolation-based, signal conditioners
on the market today. The modules are easily installed to
protect your instruments and process signals from the
harmful effects of ground loops, motor noise, and other
electrical interferences.
Affordable Signal Isolation Solution
Featuring optical isolation technology, the ADAM-3000
modules provide three-way (input/output/power) 1,000
VDC isolation. Optical isolation provides pin-point accuracy
and stability over a wide range of operations at minimal
power consumption.
Flexible Analog Data Conversion
The input/output range for the ADAM-3000 modules can
be configured through switches located inside the module.
The modules accept voltage, current, thermocouple or RTD
as input, and pass voltage or current as output.
Thermocouple input is handled by the built-in input
thermocouple linearization circuitry and a cold junction
compensation function. These ensure accurate temperature
measurement and accurate conversion of this information
to the voltage or current output.
20-2
Configuration
Common Specifications
The ADAM-3000 modules use 24 VDC power. This electrical
power wiring can be acquired from adjacent modules,
which greatly simplifies wiring and maintenance. The I/O
configuration switches are located inside the modules.
To reach the switches, simply remove the modules from
the DIN-rail bracket by sliding the modules downward.
ƒ
ƒ
ƒ
ƒ
ƒ
Modular Industrial Design
The ADAM-3000 modules can be easily mounted on
a DIN-rail, and signal wires can be connected through
screw terminals. The screw terminals and input/output
configuration switches are built inside the industrial
grade plastic casing. With simple two-wire input/output
cables, wiring is easy and reliable in harsh industrial
environments.
Applications
ƒ Signal isolation
ƒ Signal transmitters
ƒ Thermocouple/RTD/strain gauge measurements
ƒ Signal amplifiers
ƒ Noise filter
Signal Conditioning Modules and Terminal Boards
Isolation
Indicators
Power Requirement
Case
Screw Terminal
1,000 VDC
Power LED indicator
24 VDC ± 10%
ABS
Accepts 0.5 mm² ~ 2.5
mm2
1- #12 or 2- #14 ~ #22
AWG
ƒ Operating Temperature 0 ~ 70°C (32 ~ 158°F)
(ADAM-3011: 0 ~ 50°C
(32 ~ 122°F))
ƒ Storage Temperature -25 ~ 85°C
(-13 ~ 185°F)
Isolated Signal Conditioning Modules
19
20
21
Block Diagram
DAQ Boards
Gain select switch
Low Pass Filter
Voltage Output
Signal Conditioning
Current Output
Industrial USB I/O
Modules
mV/mA
+
-
Active
LPF
PGA
250
Filter
Isolation
Instrumentation
Amplifier
+15 V
Three-way Signal Isolation
Three-way (input/output/power)
1,000 VDC isolation.
Filter
+15 V
Filter
Power
Converter
Power Input
+24 V DC
Block Diagram of ADAM-3014
Dimensions
Field Configurable I/O Range
The I/O range can be configured on
site with switches inside the module.
Easy Daisy Chain Power
Wiring
Unit: mm
Power can be connected conveniently
from adjacent modules.
ADAM-3000 Series Modules
Interfacing to DAQ Cards
A wiring adapter can connect
modules to a data acquisition card.
Online Download www.advantech.com/products
20-3
ADAM-3011
ADAM-3013
ADAM-3014
Isolated Thermocouple Input Module
Isolated RTD Input Module
Isolated DC Input/Output Module
ADAM-3011
ADAM-3013
Specifications
Specifications
Thermocouple Input
ƒ Common Mode
Rejection
ƒ Input Type
RTD Input
T/C type
Temperature Range (°C)
J
K
T
E
S
R
B
-40 ~ 760
0 ~ 1,000
-100 ~ 400
0 ~ 1,000
500 ~ 1,750
500 ~ 1,750
500 ~ 1,800
Accuracy at
25°C (°C)
±2
±2
±2
±2
±4
±4
±4
ƒ
ƒ
ƒ
ƒ
1,000 VDC (Three-way)
0.5 :
±2°C
0 ~ 10 V
General
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Connectors
Enclosure
Indicators
Isolation
Power Consumption
Power Input
Operating
Temperature
ƒ Storage
Temperature
Screw terminal
ABS
Power LED indicator
1,000 VDC
1.4 W
24 VDC ± 10%
0 ~ 50°C (32 ~ 122°F)
-25 ~ 85°C (-13 ~ 185°F)
D
0.00385
0.00385
0.00385
0.00385
0.00385
0.00385
0.00385
0.00385
0.00392
0.00392
0.00392
0.00392
N/A
N/A
ƒ Output Range
ƒ Output Resistance
ƒ Temperature Drift
Temperature Range (°C)
-100 ~ 100
0 ~ 100
0 ~ 200
0 ~ 600
-100 ~ 0
-100 ~ 200
-50 ~ 50
-50 ~ 150
-100 ~ 100
0 ~ 100
0 ~ 200
0 ~ 600
0 ~ 100
-80 ~ 100
0 ~ 5 V, 0 ~ 10 V,
0 ~ 20 mA
<5:
± 30 ppm of full range
Isolated Thermocouple
Input Module
ƒ Accuracy
ƒ Common Mode
Rejection
ƒ Current Input
ƒ Current Output
ƒ Stability
(Temperature Drift)
ƒ Voltage Input
ƒ Voltage Output
Connectors
Enclosure
Indicators
Isolation
(Three-way)
Power
Consumption
Power Input
Operating
Temperature
Storage
Temperature
ƒ
ƒ
Ordering Information
ƒ ADAM-3014
Connectors
Screw terminal
Enclosure
ABS
Indicators
Power LED indicator
Isolation
1,000 VDC
Power Consumption < 0.95 W
Power Input
24 VDC ±10%
Operating
0 ~ 70°C (32 ~ 158°F)
Temperature
ƒ Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Isolated RTD Input Module
Signal Conditioning Modules and Terminal Boards
±0.1% of full range
(typical)
> 100 dB @ 50 Hz/60 Hz
Bipolar: ±20 mA
Unipolar: 0 ~ 20 mA
Input impedance: 250 :
0 ~ 20 mA
150 ppm (typical)
Bipolar input:
±10 mV, ±50 mV, ±100 mV,
±0.5 V, ±1.0 V, ±5 V, ±10 V
Unipolar input:
0 ~ 10 mV, 0 ~ 50 mV,
0 ~ 100 mV, 0 ~ 0.5 V,
0 ~ 1 V, 0 ~ 5 V, 0 ~ 10 V
Input impedance: 2 M:
Input bandwidth: 2.4 kHz
(typical)
Bipolar: ±5 V, ±10 V
Unipolar: 0 ~ 10 V
Impedance: < 50 :
Drive: 10 mA max.
General
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ ADAM-3013
20-4
± 0.1% of full range
(voltage) or +/- 0.15°C
(voltage)
± 0.2% of full range
(current)
4 Hz
92 dB min.
2, 3 or 4 wires
General
Ordering Information
ƒ ADAM-3011
Bandwidth
Input CMR at DC
Input Connections
Input Type
RTD type
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Pt
Ni
Ni
Specifications
I/O
ƒ Accuracy
115 dB min
ƒ Isolation
ƒ Output Impedance
ƒ Stability
(Temperature Drift)
ƒ Voltage Output
ADAM-3014
ƒ
ƒ
Screw terminal
ABS
Power LED indicator
1,000 VDC
0.85 W (voltage output)
1.2 W (current output)
24 VDC ±10%
-10 ~ 70°C (14 ~ 158°F)
-25 ~ 85°C (-13 ~ 185°F)
Ordering Information
Isolated DC Input/Output
Module
ADAM-3016
ADAM-3112
ADAM-3114
Isolated Strain Gauge Input Module
Isolated AC Voltage Input Module
Isolated AC Current Input Module
19
20
21
DAQ Boards
Signal Conditioning
Industrial USB I/O
Modules
ADAM-3016
ADAM-3112
ADAM-3114
Specifications
Specifications
I/O
Voltage Input
ƒ Accuracy
ƒ Bandwidth
ƒ Isolation Mode
Rejection
ƒ Current Output
ƒ Stability
(Temperature Drift)
ƒ Voltage
Specifications
ƒ Voltage Output
±0.1% of full range
2.4 kHz (typical)
>100 dB @ 50 Hz/60 Hz
Current: 0 ~ 20 mA
Current load resistor:
0 ~ 500 : (Source)
150 ppm (typical)
Electrical input: ±10 mV,
±20 mV, ±30 mV, ±100 mV
Excitation voltage:
1 ~ 10 VDC (60 mA max)
Bipolar: ±5 V, ±10 V
Unipolar: 0 ~ 10 V
Impedance: < 50 :
General
ƒ
ƒ
ƒ
ƒ
ƒ
Connectors
Enclosure
Indicators
Isolation
Power
Consumption
ƒ Power Input
ƒ Operating
Temperature
ƒ Storage
Temperature
Screw terminal
ABS
Power LED indicator
1,000 VDC (Three-way)
d 1.85 W (voltage output)
d 2.15 W (current output)
24 VDC ±10%
-10 ~ 70°C (14 ~ 158°F)
-25 ~ 85°C (-13 ~ 185°F)
Ordering Information
ƒ ADAM-3016
Isolated Strain Gauge Input
Module
Specifications
Current Input
Full Range Mode
AC
Input
(VRMS)
Voltage
DC (V)
Input Impedance
400 V
250 V
120 V
0 ~ 400
0 ~ 250
0 ~ 120
0 ~ 400
48 k
0 ~ 250
30 k
0 ~ 120
14.4 k
Voltage Output
ƒ Output Signal
ƒ Accuracy
ƒ Output Impedance
ƒ Load
ƒ Ripple
ƒ Temperature
Coefficient
ƒ Input Bandwidth
0 ~ 5 VDC
< ±1.0 % for full range
< 10 : @
operating frequency <60 Hz
> 10 k :
< 120mVp-p
400 ppm/°C
6 kHz
Power Consumption
ƒ Supply Voltage
24 VDC ± 10 %
ƒ Current Consumption 40 mA
General
ƒ Isolation Protection 1,000 VDC (output to power)
2,500 VRMS (input to output,
input to power)
ƒ Operating
0 ~ 60°C (32 ~ 140°F)
Temperature
ƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒ Storage Humidity
5 ~ 95 %
ƒ AC Current Input
ƒ DC Current Input
Voltage Output
ƒ Output Signal
ƒ Accuracy
ƒ Output Impedance
ƒ Load
ƒ Ripple
ƒ Temperature
Coefficient
ƒ Input Bandwidth
0 ~ 5 VDC
< ±1.0 % for full range
<10 : @
operating frequency <60 Hz
> 10 k:
< 120 mVp-p
400 ppm/°C
10 kHz
Power Consumption
ƒ Supply Voltage
24 VDC ± 10 %
ƒ Current Consumption 40 mA
General
ƒ Isolation Protection 1,000 VDC (output to power)
2,500 VRMS (input to output,
input to power)
ƒ Operating
0 ~ 60°C (32 ~ 140°F)
Temperature
ƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒ Storage Humidity
5 ~ 95 %
Ordering Information
ƒ ADAM-3114
Ordering Information
ƒ ADAM-3112
0 ~ 5 ARMS
0~5A
Isolated AC Current Input
Module
Isolated AC Voltage Input
Module
Online Download www.advantech.com/products
20-5
Terminal Board Selection Guide
Recommended Cables, I/O Wiring Terminal Boards and Isolated Digital I/O
Terminals for Connecting to PCI & USB Data Acquisition (DAQ) Products
I/O Wiring
T erminal Board
PCI & USB
Product
Cable
PCI-1710U/1710UL/1710HGU
PCI-1711U/1711UL
PCI-1716/1716L
PCI-1706U/UL
PCI-1741U/1742U
PCIE-1810/ PCIE-1816/ PCIE-1816H
PCL-10168
PCL-10168H
PCI-1712/1712L
PCL-10168
PCL-10168H
PCLD-8712
PCI-1718HDU/HGU
PCL-10137
ADAM-3937, PCLD-880
PCLD-8115, PCLD-789D
ADAM-3968
PCL-10137
ADAM-3937
PCLD-880
PCL-10120
PCL-10121
ADAM-3920
PCLD-782
PCL-10502+
PCL-10120, PCL-10121
PCL-10503+
PCL-10137, ADAM-3937
ADAM-3968
PCI-1751
PCL-10168
PCI-1753
PCL-10268
PCI-1713U, PCI-1715U
PCL-10137
PCI-1720U, PCI-1733, PCI-1734
PCI-1750, PCIE-1760, PCI-1760U,
PCI-1761, USB-4702
PCL-10137
PCI-1784U
PCI-10137H
ADAM-3968/50
PCL-10150+
ADAM-3950
PCLD-782B
PCLD-785B
PCLD-885
PCLD-7216
ADAM-3968/20
PCL-10120
PCLD-8751, PCLD-8761
PCLD-8762
ADAM-3937
ADAM-3951
PCL-101100M
ADAM-39100
PCI-1724U, PCI-1762
PCL-10162
ADAM-3962
PCI-1737U
PCI-1739U
USB-4751/L
PCL-10150
PCL-10901
PCLD-782B
PCLD-785
ADAM-3937
PCLD-880
PCLD-881B
PCL-10250
PCI-1752U, PCI-1754, PCI-1756
PCIE-1752, PCIE-1754, PCIE-1756
Digital I/O
Terminal
PCLD-8710
PCL-10120
PCL-10121
PCI-1727U
PCI-1730U
PCIE-1730
Cable
PCLD-785B
PCLD-786
ADAM-3950, PCLD-782B
PCLD-785B, PCLD-885
PCLD-7216
ADAM-3909
PCI-1714U/1714UL, PCIE-1744
PCLD-788
PCL-1010B
PCI-1757UP
PCL-10125
ADAM-3925
PCI-1747U, PCI-1721
PCI-1723, PCI-1780U
PCL-10168
ADAM-3968
PCL-10120
PCL-10121
PCI-1735U
PCL-10502+
PCL-10120, PCL-10121
PCLD-885
PCL-10503+
PCL-10137, ADAM-3937
PCI-1755
PCL-101100
PCI-1758UDI/1758UDO/1758UDIO
PCL-101100S
PCI-1671UP, USB-4671
PCL-10488
ADAM-39100
20-6
Signal Conditioning Modules and Terminal Boards
PCLD-7216
Recommended Cables, I/O Wiring Terminal Boards and Isolated Digital I/O
Terminals for Connecting to PC/104 & PCI-104 Data Acquisition (DAQ) Products
PC/104 & PCI-104
Product
Cable
I/O Wiring
Terminal Board
Digital I/O
Terminal
19
20
21
DAQ Boards
Signal Conditioning
Industrial USB I/O
Modules
PCM-3718H/HO/HG
PCM-3730
PCL-10120
PCL-10121
ADAM-3920
PCLD-780
PCM-3724
PCM-3753I
PCM-3725
PCM-3780
PCM-3761I
PCL-10150
ADAM-3950, PCLD-782B
PCLD-785B, PCLD-885
PCLD-7216
PCL-10120
PCL-10121
ADAM-3920
PCLD-782
PCLD-782B
PCLD-785
PCL-10150
ADAM-3950
PCLD-785B
PCL-10126
PCL-10125
ADAM-3925
PCM-3810I
PCLD-786
PCL-10150
ADAM-3950
PCLD-788
PCM-3813I
PCL-10141
PCL-10137
ADAM-3937
PCLD-885
PCM-3730I
PCL-10120
PCL-10121
PCLD-7216
ADAM-3920
Cable Accessories
Model
Description
Model
Description
PCL-1010B-1E
BNC to BNC Wiring Cable, 1 m
PCL-10137H-3E
DB37 High-Speed Cable, 3 m
PCL-101100-1E
100-pin SCSI High-Speed Cable, 1 m
PCL-10141-0.2E
IDE#2 40-pin to DB37(F) Flat CABLE, 0.2m
PCL-101100S-1E
100-pin Mini-SCSI Cable, 1 m
PCL-10150-1.2E
50-pin Flat Cable, 1.2 m
PCL-101100S-2E
100-pin Mini-SCSI Cable, 2 m
PCL-10162-1E
DB62 Cable, 1 m
PCL-101100S-3E
100-pin Mini-SCSI Cable, 3 m
PCL-10162-3E
DB62 Cable, 3 m
PCL-101100M-3E
100-pin SCSI Shielded Cable, 3 m
PCL-10168-1E
68-pin SCSI Shielded Cable, 1 m
PCL-10120-0.4E
20-pin Flat Cable, 0.4 m
PCL-10168-2E
68-pin SCSI Shielded Cable, 2 m
PCL-10120-1E
20-pin Flat Cable, 1 m
PCL-10168H-1E
68-pin SCSI Shielded Cable with Noise Rejecting, 1m
PCL-10120-2E
20-pin Flat Cable, 2 m
PCL-10168H-2E
68-pin SCSI Shielded Cable with Noise Rejecting, 2m
PCL-10121-2E
20-pin Shielded Cable, 2 m
PCL-10250-1E
100-pin SCSI to Two 50-pin SCSI Cable, 1 m
PCL-10125-1E
DB25 Cable, 1 m
PCL-10250-2E
100-pin SCSI to Two 50-pin SCSI Cable, 2 m
PCL-10125-3E
DB25 Cable, 3 m
PCL-10268-1E
100-pin SCSI to Two 68-pin SCSI Cables, 1 m
PCL-10126-0.2E
IDE#2 26-pin to DB25(F) Flat CABLE, 0.2m
PCL-10268-2E
100-pin SCSI to Two 68-pin SCSI Cables, 2 m
PCL-10137-1E
DB37 Cable, 1 m
PCL-10488-2
IEEE-488 Cable, 2 m
PCL-10137-2E
DB37 Cable, 2 m
PCL-10502-AE
Extender, Extend Dual 20-pin to PC Slot-Plate
PCL-10137-3E
DB37 Cable, 3 m
PCL-10503-AE
Adapter Dual 20-pin to DB37
PCL-10137H-1E
DB37 High-Speed Cable, 1 m
PCL-10901-3E
DB9 to PS/2 Cable, 3 m
Online Download www.advantech.com/products
20-7
ADAM-3854
ADAM-3864
4-ch Power Relay Module
4-ch Solid State Digital I/O Module
Carrier Backplane
ADAM-3854
ADAM-3864
Features
Features
ƒ High power relays can handle up to 5 A @ 250 VAC and 5 A @ 30 VDC
ƒ
ƒ
ƒ
ƒ
ƒ 4 single-pole double-throw (SPDT) relays
ƒ Industrial screw terminals for easy output wiring
ƒ LED status indicators
ƒ Onboard varistor protects relay contact points
ƒ DIN-rail mounting
Field Side:
ƒ Input On/Off Voltage
I/O
ƒ Channels
ƒ Contact Rating
4
250 VAC @ 5 A
30 VDC @ 5 A
100 m:
15 ms max.
SPDT (Form C)
5 ms max.
1.7 x 105 at rated load
Contact Resistance
Operation Time
Relay Type
Release Time
Life Expectancy
Clamping Voltage
Max. Applied Voltage
Max. Peak Current
Varistor Voltage
760 V (10 A)
300 VRMS
1,200 A for 8 ms
470 V (current = 1 mA)
General
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Connectors
Dimensions (L x W x H)
LED Indicators
Mounting
Power Consumption
Power Input
Screw terminals
112.5 x 118.4 x 46 mm (4.43" x 4.66" x 1.81")
Status displayed for each relay
DIN-rail
2.2 W
24 VDC
Ordering Information
ƒ ADAM-3854
20-8
ƒ Input Resistance
Logic Side:
ƒ Breakdown Voltage
ƒ Output Current
ƒ Output Voltage Drop
ƒ Supply Current
ƒ Supply Voltage
IAC24A series: 180 ~ 280 V/80 VRMS
Range IDC24B series: 3 ~ 32 V/1 VDC
IAC24A series: 44 k:
IDC24B series: 1.5 k:
30 VDC
100 mA max.
0.4 V max.
12 mA max.
24 VDC
Output Modules
Varistor
ƒ
ƒ
ƒ
ƒ
Specifications
Input Modules
Specifications
ƒ
ƒ
ƒ
ƒ
ƒ
2,500 VRMS optical isolation
LED status indicators
Onboard fuse protection
DIN-rail mounting
4-ch DIN-rail Power Relay Module
Field Side:
ƒ Contact Voltage Drop
ƒ Current Rating
Logic Side:
ƒ Input Resistance
ƒ Supply Current
ƒ Supply Voltage
1.6 V max.
3 A max. (@ 25°C)
220 :
12 mA max.
24 V
General
ƒ Dimensions (L x H x W) 118.4 x 90 x 59 mm (4.66" x 3.54" x 2.32")
ƒ Mounting
DIN-rail
Ordering Information
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Signal Conditioning Modules and Terminal Boards
ADAM-3864
OAC24A
ODC24
PCLM-ODC5
IAC24A
IDC24B
4-ch Solid State Module Carrier Backplane
AC Output Module (24-280 VAC, 3 A)
DC Output Module (5-60 VDC, 3 A)
Single Piece DC SSR Module (60 VDC, 3 A)
AC Input Module (180-280 VAC)
DC Input Module (3-32 VDC)
PCLD-782/B
PCLD-785/B
PCLD-885
16/24-ch Opto-Isolated Digital Input Board
16/24-ch Relay Board
16-ch Power Relay Board
19
20
21
DAQ Boards
Signal Conditioning
Industrial USB I/O
Modules
RoHS
PCLD-782/B
RoHS
PCLD-785/B
COMPLIANT
2002/95/EC
RoHS
PCLD-885
COMPLIANT
2002/95/EC
COMPLIANT
2002/95/EC
Features
Features
Features
ƒ Compatible with all PC-LabCard™ products with DI
channels on either 20-pin flat cable or 50-pin Opto22 compatible connectors
ƒ 16 or 24 optically-isolated digital input channels
ƒ Built-in screw terminals for easy input wiring
ƒ LEDs indicate input logic status
ƒ Inputs buffered with voltage comparators
ƒ Compatible with PC-LabCard™ products with 20-pin
digital output connector and 50-pin Opto-22 digital
output connector (PCLD-785B only)
ƒ Automatic selection of control logic (PLCD-785B
only): Negative logic for the Opto-22 connector
Positive logic for the 20-pin flat cable connector
ƒ Screw terminals for easy output wiring
ƒ LED status indicators
ƒ Accepts 20-pin or 50-pin (Opto-22 compatible)
connectors
ƒ 16 single-pole single-throw (SPST) relays
ƒ High-power relay handles up to 6 A @ 250 VAC
ƒ Onboard varistors protect all relay contact points
ƒ Industrial screw terminals for ease of wiring
ƒ LED status indicators
ƒ 5 V/ 12 V power/status LED indicator
Specifications
Specifications
Specifications
Isolated Digital Input
ƒ Channels
ƒ
ƒ
ƒ
ƒ
Input Range
Input Resistance
Isolation Voltages
Threshold Voltage
Relay
PCLD-782: 16
PCLD-782B: 24
0 ~ 24 VDC
560 :
1,500 VDC min.
1.5 VDC (VR adjustable)
General
ƒ DI Connectors
ƒ
ƒ
ƒ
ƒ
Screw terminals
(#12 ~ 22 AWG)
Controller Connector PCLD-782: 1 x 20-pin box
header (CN1)
PCLD-782B: 1 x 20-pin
box header (CN1) and 1 x
50-pin box header (CN2)
Dimensions (L x W) PCLD-782: 3U– 205 x 114
mm (8.1" x 4.5")
PCLD-782B: 4U– 220 x
132 mm (8.7" x 5.2")
LED Indicators
Indicates input logic status
Mounting
4 x screw holes for flat
surface mounting
Ordering Information
ƒ PCLD-782
ƒ PCLD-782B
16-ch Isolated DI Board w/
1m 20-pin Flat Cable
24-ch IDI Board w/ 20-pin
& 50-pin Flat Cables
Accessories
ƒ PCL-10120-1E
ƒ PCL-10120-2E
ƒ PCL-10150-1.2E
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
50-pin Flat Cable, 1.2 m
Relay
ƒ Channels
ƒ Contact Ratings
ƒ
ƒ
ƒ
ƒ
Contact Resistance
Operation Time
Insulation Resist.
Life Expectancy
ƒ Relay Type
ƒ Release Time
PCLD-785: 16 (CN1, 20pin conn.)
PCLD-785B: 16 (CN1,
20-pin conn.)
24 (CN2, 50-pin conn.)
120 VAC @ 0.5 A, 30 VDC @
1A
< 100 m:
5 ms max.
100 M:
5 x 105 @ 110 VAC /0.3 A
5 x 105 @ 24 VDC /1.25 A
SPDT (Single-Pole DoubleThrow) Form C
5 ms max.
General
ƒ Dimensions (L x W) PCLD-785: 114x220 mm
PCLD-785B: 132x220 mm
ƒ Power Consumption 5 V @ < 100 mA; 12 V @
33 mA for each relay
ƒ Power Input
20-pin connector: 5 VDC:
Jumper select PC bus or
external supply
12 VDC: Jumper select PC
bus or external supply
50-pin connector: external
12 V supply
Ordering Information
ƒ PCLD-785
16-ch Relay Board w/ One
1m 20-pin Flat Cable
24-ch Relay Board w/ 20pin & 50-pin Flat Cables
ƒ PCLD-785B
Accessories
ƒ PCL-10120-1E
ƒ PCL-10120-2E
ƒ PCL-10150-1.2E
ƒ Channels
ƒ Contact Rating
ƒ Contact Resistance
ƒ Insulation Resist.
ƒ Life Expectancy
ƒ Relay On Time
ƒ Relay Off Time
ƒ Relay Type
16
250 VAC @ 6 A
30 VDC @ 5 A
30 m:max.
1,000 M:@ 500 VDC
>100,000 cycles at rated
load
6 ms max.
3 ms max.
SPST (Form A), normally
open
Varister
ƒ
ƒ
ƒ
ƒ
Clamping Voltage
760 V (10 A)
Max. Peak Current 1,200 A for 8 msec.
Max. Applied Voltage 300 VRMS AC continuous
Varistor Voltage
470 V (current = 1 mA)
General
ƒ Power Consumption 12 V @ 22 mA for each
relay, 352 mA if all relays
energized
5 V @ 200 mA max.
ƒ Connectors
Input: 20-pin flat cable or
50-pin Opto-22 compatible
Output: Barrier strip screw
terminal
ƒ Dimensions (L x W) 205 x 114 mm (8" x 4.5")
ƒ Operating Temp.
0 ~ 60°C (32 ~ 140°F)
Ordering Information
ƒ PCLD-885
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
50-pin Flat Cable, 1.2 m
Online Download www.advantech.com/products
16-ch Power Relay Board
w/ 20p & 50p Flat Cables
20-9
PCLD-8751
PCLD-8761
PCLD-8762
48-ch Opto-Isolated Digital Input Board
24-ch Opto-Isolated DI and 24-ch Relay Output Board
48-ch Relay Output Board
PCLD-8751
PCLD-8761
PCLD-8762
Features
Features
Features
ƒ 48 optically-isolated digital input channels
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ Built-in plug-in screw terminals for easier wiring
ƒ Built-in plug-in screw terminals for easier wiring
ƒ LEDs indicate input logic status
ƒ Input buffered with voltage comparators
ƒ Wet/Dry contact set by DIP switches
ƒ Input logic set by jumper
ƒ Wide input range from 5 to 30 V
Built-in plug-in screw terminals for easier wiring
LED status indicators for D/I and relay output
Digital inputs buffered with voltage comparators
Wet/Dry contact set by DIP switches for D/I
Wide input range from 5 to 30 V
INT/EXT Power selection by jumper
Specifications
Specifications
Digital Input
Digital Input
ƒ Channels
ƒ Contact Mode
ƒ Channels
ƒ Contact Mode
ƒ Isolation Voltage
ƒ Logic Modes
ƒ Signal Voltage
48 isolated digital inputs
Wet contact
Dry contact (set by switch)
3,500 V
Positive Logic
Negative Logic
(set by jumper)
0 ~ 30 V
VIH (MIN) : 4 V,
VIL (MAX) : 1 V
General
ƒ Certification
ƒ Connectors
ƒ Dimensions
ƒ LED Indicators
ƒ Mounting
CE, FCC
Cable: SCSI-68 pin
Signals: Plug-in screw
terminals (#14 - 24 AWG)
255 x 121 mm
(10.04" x 4.76")
One for each channel to
indicate logic status
DIN-rail
Ordering Information
ƒ PCLD-8751
ƒ Digital Input
ƒ Isolation Voltage
ƒ Logic Mode
(IDI and Relay are
independent)
24 IDI with LED
Wet contact and dry contact for
each IDI (set by switch)
0 ~ 30 V VIH (MIN) : 4 V, VIL
(MAX) : 1V
3,500 V (Isolated DI), 1,500V
(Relay)
Positive Logic
Negative Logic
(set by jumper)
Relay Output
ƒ Channels
ƒ Contact Rating
ƒ Contact Resistance
ƒ Electrical Endurance
ƒ Mechanical
24 SPDT (Form C)
30 VDC @ 1 A,
120 VAC @ 0.5 A
100 m:
5 x 107 times at 12 V/10 mA
108 times
ƒ Operation Time
ƒ Release Time
5 ms Max
6 ms Max
Endurance
General
ƒ Certification
ƒ Connectors
ƒ
ƒ
ƒ
48-ch Opto-isolated Digital
Input Board
ƒ
CE, FCC
Cable: SCSI-68 pin
Signals: Plug-in screw terminals (#14 - 24 AWG)
Dimensions
285 x 121 mm
(11.22" x 4.76")
Mounting
DIN-rail
Power Consumption +5 V @ < 380 mA +50*n (mA)
+12 V @ < 240 mA +70*n
(mA)
(*n indicate the number of
relays)
Power Selection
PCI Bus or External
power (7 ~ 30 V) by jumper
Ordering Information
ƒ PCLD-8761
20-10
24-ch Opto-isolated DI and
24-ch Relay (SPDT)
Output Board
Signal Conditioning Modules and Terminal Boards
ƒ LED status indicators for Relay output
ƒ DIN-rail mounting
ƒ Onboard relay driver circuits
Specifications
Relay Output
ƒ Channels
ƒ Contact Rating
ƒ
ƒ
ƒ
ƒ
ƒ
48 SPDT (Form C)
30 VDC @ 1 A,
120 VAC @ 0.5 A
Contact Resistance 100 m:
Electrical Endurance 5 x 107 times at 12 V/10
mA
Mechanical
108 times
Endurance
Operation Time
5 ms Max
Release Time
6 ms Max
General
ƒ Certification
CE, FCC
ƒ Connectors
Cable: SCSI-68 pin
Signals: Plug-in screw terminals (#14 - 24 AWG)
ƒ Dimensions
285 x 117 mm
(11.22" x 4.61")
ƒ Mounting
DIN-rail
ƒ Power Input
Unregulated 7 ~ 30 VDC
ƒ Power Consumption 7 V @ 1.8 A,
30 V @ 0.45 A
(External power supply is
required)
Ordering Information
ƒ PCLD-8762
48-ch Relay (SPDT) Output
Board
PCLD-786
PCLD-7216
8-ch SSR I/O Module Carrier Board
16-ch SSR I/O Module Carrier Board
19
20
21
DAQ Boards
Signal Conditioning
Industrial USB I/O
Modules
PCL-10120-1
PCLD-786
PCLM-ODC5
PCLD-7216
Features
Features
ƒ
ƒ
ƒ
ƒ
ƒ Channel status reflected by onboard LED for easy monitoring
ƒ Onboard fuse protection
Up to eight AC or DC solid state relay modules
Photo-coupler isolated operation
Eight external relay drivers
LED status indicators
Specifications
Module Type
Specifications
AC Solid State Relays
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
1 Cycle Surge
Blocking Voltage
Off Leakage Current
On-state Voltage
Output Rating
Turn On
Turn On/Turn Off Time
Type
40 A
±600 V min.
8 mA max.
1.6 V max.
24 ~ 280 VAC @ 3.0 A
zero volts
< ½ cycle
PCLM-OAC5A
1 Second Surge
OFF Leakage Current
ON-state Voltage
Output Rating
Turn On/Turn Off Time
Type
Channels
Coil Driving Voltage
Driver Type
Max. Driving Current
DC Output
PCLM-ODC5
5 ~ 60 VAC
3.0 A
Input Modules
Part No.
Input On Voltage
Input Off Voltage
AC Input
PCLM-IAC5A
180 ~ 280 VAC
< 80 V
DC Input
PCLM-IDC5B
3 ~ 32 VAC
<1V
Voltage Range
5A
1 mA max.
1.4 V max.
5 ~ 60 VDC @ 3.0 A
750 μs max.
PCLM-ODC5
ƒ Input Resistance
8
5 V, 12 V from PC or external source
ULN2003, open collector type
125 mA each channel
Output Modules
ƒ Turn On/Off Time
Logic Side:
Breakdown Voltage
Output Current
Output Voltage Drop
Supply Current
Supply Voltage
ƒ
ƒ
ƒ
ƒ
ƒ
30 VDC
100 mA max.
0.4 V max.
12 mA max.
4~6V
3 A max. (@ 25°C)
1.6 V max.
PCLM-OAC series: ½ AC cycle max.
PCLM-ODC series: 100 μsec/750 μsec. max.
Logic Side:
205 x 114 mm (8.1" x 4.5")
ƒ Input Resistance
ƒ Supply Voltage
ƒ Supply Current
Ordering Information
Single Piece AC SSR Module (280 VAC, 3 A)
Single Piece DC SSR Module (60 VDC, 3 A)
PCLM-IAC5: 90 ~ 140 V/45 VRMS
PCLM-IAC5A: 180 ~ 280 V/80 VRMS
PCLM-IDC5B: 3 ~ 32 V/1 VDC
PCLM-IAC5: 14 k:, PCLM-IAC5A: 44 k:,
PCLM-IDC5B: 1.5 k:
PCLM-IAC5: 20 msec. max., PCLM-IAC5A: 20 msec. max.
PCLM-IDC5B: 100 msec. max.
Field Side:
ƒ Current Rating
ƒ Contact Voltage Drop
ƒ Turn On/Off Time
ƒ PCLD-786
8-ch SSR I/O Module Board w/ 20-pin Flat Cable
Note: PCLD-786 does not include SSRs. They must be ordered by selecting single piece
SSR modules according to your requirements.
ƒ PCLM-OAC5A
ƒ PCLM-ODC5
PCLM-OAC5A
Logic Side
Input Logic and SSR
Status
TTL low (On)
TTL high (Off)
TTL low (On)
TTL high (Off)
Output Logic and
On/Off Status
TTL low (On)
TTL high (Off)
TTL low (On)
TTL high (Off)
Field Side:
General
ƒ Dimensions (L x W)
AC Output
ƒ Input On/Off
External Relay Drivers
ƒ
ƒ
ƒ
ƒ
Part No.
Input Modules
DC Solid State Relays
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Field Side
Output Voltage
Output Current
Rating
Rating
24 ~ 280 VAC
3.0 A
12 ~ 280 VAC
Output Modules
220 :
4~6V
12 mA max.
General
ƒ Logic Side Connectors
ƒ Dimensions (L x W x H)
50-pin edge connector, Opto-22 compatible
367 x 111 x 56 mm (14.4" x 4.4" x 2.2")
Ordering Information
ƒ PCLD-7216
16-ch SSR I/O Module Carrier Board
Note: PCLD-7216 does not include SSRs. They must be ordered by selecting single piece SSR
modules according to your requirements.
Online Download www.advantech.com/products
20-11
PCLD-8710
PCLD-8712
DIN-rail Wiring Terminal Board with CJC Circuit
DIN-rail Wiring Terminal for PCI-1712/L
Features
ƒ Low-cost screw-terminal with 68-pin SCSI-II connector
ƒ Onboard CJC (Cold Junction Compensation) circuits for direct thermocouple
measurement (PCLD-8710)
ƒ Reserved space for signal-conditioning circuits such as low-pass filter,
voltage attenuator and current shunt
ƒ Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable
connections
ƒ DIN-rail mounting case for easy mounting
ƒ Supports PCI-1710U/UL, PCI-1710HGU, PCI-1711U/UL, PCI-1716/L
(PCLD-8710) and PCI-1712/1712L (PCLD-8712)
PCLD-8710
PCLD-8712
Introduction
The PCLD-8710 is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710U/UL, PCI-1710HGU, PCI-1711U/UL, PCI-1716/L cards. This screwterminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation and linearization,
every thermocouple type can be accommodated. The PCLD-8712 Screw-terminal Board provides convenient and reliable signal wiring for the PCI-1712/L of which has a 68-pin
SCSI-II connector.
Due to its special PCB layout you can install passive components to construct your own signal-conditioning circuits. The user can easily construct a low-pass filter, attenuator or
current shunt converter by adding resistors and capacitors on board’s circuit pads.
Applications
Field wiring for analog and digital I/O channels of PC-LabCard™ products.
c) 10 : 1 voltage attenuator:
Signal conditioning circuits can be implemented as illustrated in the following
examples:
RAn = 9 K:
a) Straight-through connection (factory setting)
Cn = none
RBn = 1 K:
R n
RAn R n
RAn = 0 : (short)
Attenuation =
RBn = none
(Assume source impedance << 10 K:)
Cn = none
d) 4 ~ 20 mA to 1 ~ 5 VDC signal converter:
RAn = 0 : (short)
RBn = 250 : (0.1% precision resistor)
Cn = none
Ordering Information
b) 1.6 kHz (3 dB) low pass filter
RAn = 10 K:
RBn = none
Cn = 0.01 μF
f3dB =
20-12
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
1
2 SRAn.Cn
Signal Conditioning Modules and Terminal Boards
PCLD-8710
PCLD-8712
PCL-10120-1E
PCL-10120-2E
PCL-10168-1E
PCL-10168-2E
DIN-rail Wiring Terminal Board with CJC Circuit
DIN-rail Wiring Terminal for PCI-1712/L
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
PCLD-788
16-ch Relay Multiplexer Board
Features
19
20
21
DAQ Boards
ƒ 16 to 1 channel expansion
ƒ Differential and fully isolated multiplexing
ƒ Break-before-make relay control
ƒ “Channel closed” signal for precise A/D triggering
ƒ Up to 16 PCLD-788s can be cascaded for 256 channels
ƒ Easy wiring for large channel count configuration
Signal Conditioning
Industrial USB I/O
Modules
ƒ Onboard cold-junction circuitry for thermocouple measurement
Introduction
PCLD-788 multiplexes 16 channels into a single I/O channel of an A/D converter, voltmeter or IEEE-488-based instrument. Up to 16 PCLD-788s can be cascaded for a total of 256
fully-isolated differential channels. The PCLD-788 can be controlled by any PC-LabCard™ product via a 16-bit 20-pin digital output port, found on cards such as the PCL-711B,
PCL-812PG or the PCL-818 series. Channel selection (0-15) and board selection (0-15) are done by programming the high-order four bits and low order four bits of a digital output
byte from the main I/O card in use.
Specifications
I/O
ƒ Channel Closed Signal TTL-level pulse
ƒ Cold-junction Sensor 24.4 mV/°C, 0 V at 0°C
Output
ƒ Contact Rating
Break-before-make with 3 msec. minimum break time
ƒ Contact Resistance
200 m: max.
ƒ Input Channels
16 isolated differential inputs
ƒ Programming
DO bit 0, 1, 2 and 3 for channel selection, DO bit 4, 5,
6 and 7 for board selection. Onboard DIP switches for
board-address setting
ƒ Max. Input Voltage
100 VDC or 100 V peak AC
ƒ Max. Switching Current 0.5 A
ƒ Max. Switching Power 10 VA
ƒ Operating Time
1 ms max.
ƒ Relay Life Expectancy 100 million cycles min. at 10 VDC and 1 mA
ƒ Release Time
1 msec. max.
PCLD-788 Block Diagram
Pin Assignments
General
ƒ Connectors
Controller:
I/O:
ƒ Dimensions (L x W)
ƒ Mounting
ƒ Power Consumption
2 x 20-pin box header, second connector in parallel for
daisy chaining
Screw terminals
205 x 114 mm (8" x 4.5")
4 x screw holes for flat surface mounting
5 V @ 380 mA max.
Ordering Information
ƒ PCLD-788
ƒ PCL-10120-1E
ƒ PCL-10120-2E
16-ch Relay MUX Board w/ Two 20-pin Flat Cables
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Online Download www.advantech.com/products
20-13
PCLD-789D
Amplifier and Multiplexer Board
Features
ƒ Multiplexes 16 differential inputs to one A/D input
ƒ Expands a PC-LabCard™ product’s analog inputs to 128 channels
ƒ High-grade instrumentation amplifier provides switch selectable gains of 1, 2,
10, 50, 100, 200, 1,000
ƒ Onboard cold-junction compensation circuits for direct thermocouple
measurement
ƒ Built-in signal conditioning functions include filter, attenuator and current
shunt
ƒ Second connectors onboard allow daisy chaining
ƒ Screw-clamp terminal blocks permit easy and reliable connections
Introduction
PCLD-789D is a front-end signal conditioning and channel multiplexing daughterboard for use with PC-LabCard™ product’s analog input ports. It multiplexes 16 differential input
channels into a single A/D converter input channel. You can cascade up to ten PCLD-789Ds, allowing a single data acquisition card to access 160 analog input channels.
PCLD-789D has DB37 and 20-pin flat cable connectors and lets your PCL-818L or PCL-818HD access up to 128 channels without using an additional digital output cable to select
channels. The PCLD-789D uses a high-grade instrumentation amplifier that provides switch-selectable gains of 1, 2, 10, 50, 100, 200 and 1,000. This amplifier lets you accurately
measure low-level signals with your PC-LabCard™ product. The board also contains a cold-junction sensing circuit that allows direct temperature measurement from thermocouple
transducers. A wide variety of thermocouples are supported with software compensation and linearization.
Specifications
Pin Assignments
I/O
ƒ Cold-junction
Compensation
ƒ Input Channels
ƒ Input Conditions
Gains
1,000
100
10
1
24.4 mV/°C, 0 V at 0°C
16 differential
CMRR
125 dB
115 dB
105 dB
85 dB
Nonlinearity
0.005% FSR
0.005% FSR
0.007% FSR
0.015% FSR
Setting Time
75 μsec.
15 μsec.
15 μsec.
15 μsec.
ƒ Input Range
±10 V max. depending on the selected gain
ƒ Output Range
±10 V max.
ƒ Overvoltage Protection ±30 V continuous
General
ƒ Connectors
Controller:
I/O:
ƒ Dimensions (L x W)
ƒ Mounting
ƒ Power Consumption
1 x DB37 male connector
2 x 20-pin box header for daisy chaining
Screw terminals
205 x 114 mm (8.1" x 4.5")
4 x screw holes for flat surface mounting
5 V @ 30 mA max, 12 V @ 80 mA max.
Ordering Information
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
20-14
PCLD-789D
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
PCL-10120-1E
PCL-10120-2E
Amplifier and Multiplexer Board w/ 1m DB37 Cable
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Signal Conditioning Modules and Terminal Boards
Block Diagram
Download PDF