SignaMax Category 6A MT-Series Screened Keystone Jacks Installation instructions

Below you will find brief information for Keystone Jacks MT KJS458MT. The document includes instructions for installing the MT Series Screened Keystone Jacks, including how to strip and terminate cables. The instructions cover topics like how to properly install strain relief, how to position cables into corresponding slots, and how to trim excess wire. The guide also covers the use of tools like the KJM-8600 tool for terminating cables.

PDF Download

Document

MT Series Screened Keystone Jacks
www.signamax.com
999 N.W. 159th Drive Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483
Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change
INSTALLATION INSTRUCTIONS
Premise Connectivity Systems
PII.KJS458MT A MAY 14
MT Series Screened Keystone Jacks
www.signamax.com
999 N.W. 159th Drive Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483
Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change
INSTALLATION INSTRUCTIONS
Premise Connectivity Systems
PII.KJS458MT A MAY 14
">

Hello! I am an AI chatbot specifically trained to assist you with the SignaMax Category 6A MT-Series Screened Keystone Jacks Installation instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Screened Keystone Jacks
Easy Installation
Clear Instructions
Detailed Graphics
Step-by-Step Guide
Tools and Materials List

Frequently asked questions

The instructions list a number of tools, including electrician's scissors, a cable jacket stripping tool, a shear cutter, a standard 110 single-position termination tool, and a KJM-8600 tool for four-pair termination.

The instructions recommend using a cable that is at least 25 mm (1 in) from the handle twisted-pair conductors.

You can use a 110 termination tool to terminate the cables. The instructions provide a step-by-step guide on how to use the tool to trim excess wire.

Strain relief is used to secure the cable to the jack and prevent the cable from pulling away from the jack. The instructions provide a step-by-step guide on how to install the strain relief.

The document lists different cable types, including coaxial cable, telephone cable, and network cable. The instructions provide a step-by-step guide on how to install each type of cable.