CYP QU-18WE v1.3 HDMI 1 to 8 Mountable Splitter HDMI splitter Operation Manual

Below you will find brief information for HDMI splitter QU-18WE v1.3 HDMI 1 to 8 Mountable Splitter. The QU-18WE HDMI splitter is a high-performance device that allows you to split one HDMI signal into eight identical outputs. It supports v1.3 HDMI specifications, including Deep Colour and High Definition Audio. Each buffered output can run 1080p/8-bit up to 10 meters. The device also features Auto signal amplification and equalisation, which improves signal transmission distances. It supports CEC bypass, 3D signals, and xvYCC.

PDF Download

Document

QU-18WE

v1.3 HDMI 1 to 8

Mountable Splitter

OPERATION MANUAL

Introduction

Features

Package Contents

Operation Controls and Functions

4.1 Front Panel Diagram

4.2 Bottom Panel Diagram

Connection Diagram

Specifications

2-3

4-5

1. Introduction

The QU-18WE Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio.

Each buffered output can run 1080p/8-bit up to 10 metres.

2. Features

• v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant

• HDMI 1 to 8 Mountable Splitter

• Resolutions supported: PC - VGA to WUXGA; HDTV - 480i to 1080p plus

1080p24fps

• High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio plus LPCM

• Auto signal amplification & equalisation improves signal transmission distances

• Supports CEC bypass

• Supports Deep Colour (10 & 12 bit)

• Selectable EDID settings - TV (downstream) and STD (fixed)

• System reset function switch generate a command every 10 minutes to the connected display which resets them to the correct HDMI input

• Supports xvYCC

• Supports 3D signals

3. Package Contents

• 1 by 8 HDMI 1.3 Splitter

• Power adaptor

• Operational Manual

Page 1

4. Operation Controls and Functions

4.1 Front Panel

HDMI OUTPUT

QU-18W

1X8 HDMI V1.3 Splitter

STD

EDID

Sys.Reset

OFF

Power

OFF

8 Bit

12 Bit

2CH

Multi CH

HDMI INPUT DC 5V

1. HDMI OUTPUT 1~8: Connect your LCD TV or HD monitor with HDMI cables.

2. EDID selection: STD/TV – By switching to STD user can select both deep colour and audio channels function, if switching to TV the unit will read TV’s EDID and send the image from source accordingly.

Note:

1. When in STD mode the deep colour is suggest switching to 8 bit for longer distant display.

Page 2

1. 2CH/Multi CH – Support 2 channels or Multi audio channels audio function

This selection is only available when EDID is in STD mode.

Note:

When Multi CH is selected TV/ display must also support Multi CH function otherwise, TV/display will have no audio output unless, HDMI output connect to AVR and then to TV/display. 8/12 bit – Supports 8 or 12 bit’s deep colour function. This selection is only available when EDID is in STD mode.

Note:

When both 8 bit and 12 bit displays are connected to the HDMI output, switch the unit to 8 bit using the selector switch to ensure all screens display a signal. On the other hand, if all screens are 12 bit or all 8 bit then switch the selector switch to 12 bit or 8 bit to ensure the correct output is displayed. The splitter cannot output 8 bit and 12 bit simultaneously, so the lesser bitrate must be selected to ensure the displays operate correctly.

2. Sys. Reset: System reset function. It is suggest having this function switch OFF always except when doing system reset. By switching to ON the system will reset HDMI output to HDMI 1 within 8~10 minutes, switching to OFF means

CEC bypass.

Note:

The system reset function only functioning when the display has built-in CEC functionality.

3. Power & LED: Power switch On/Off Red LED illuminate when power is on.

4. HDMI INPUT: Connect your source equipment with HDMI cables. 3

Page 3

4.1 Bottom Panel

1. DC 5V: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. Red LED will illuminate when the Power is On.

6. Connection Diagram

7. Specifications

Frequency Bandwidth

Input Port

Output Port

HDMI Output Resolution

2.25Gbps (single link)

1 x HDMI Female Ports

8 x HDMI female Ports

480i~1080p, 1080p24, VGA~WUXGA

Page 4

Power Supply

Dimensions (mm)

Weight (g)

Chassis Material

Silk Skin Colour

Operating Temperature

5VDC/3.2A (US/EU standards, CE/FCC/UL certified)

94mm (W) x 220mm (D) x 32mm (H)

460g

Aluminium

Black

Operating from 0°C ~ 40°C

Page 5

www.cypeurope.com

v1.01

Hello! I am an AI chatbot specifically trained to assist you with the CYP QU-18WE v1.3 HDMI 1 to 8 Mountable Splitter HDMI splitter Operation Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key Features

v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant
HDMI 1 to 8 Mountable Splitter
Resolutions supported: PC - VGA to WUXGA; HDTV - 480i to 1080p plus 1080p24fps
High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM
Auto signal amplification & equalisation improves signal transmission distances
Supports CEC bypass
Supports Deep Colour (10 & 12 bit)
Selectable EDID settings - TV (downstream) and STD (fixed)
System reset function switch generate a command every 10 minutes to the connected display which resets them to the correct HDMI input
Supports xvYCC

Frequently Answers and Questions

What is the maximum resolution supported by the QU-18WE HDMI splitter?

The QU-18WE HDMI splitter supports resolutions up to 1080p for HDTV and WUXGA for PC.

Does the QU-18WE HDMI splitter support Deep Colour?

Yes, the QU-18WE HDMI splitter supports Deep Colour (10 & 12 bit).

What is the maximum distance that the QU-18WE HDMI splitter can transmit signals?

Each buffered output can run 1080p/8-bit up to 10 metres.

What is the purpose of the EDID selection on the QU-18WE HDMI splitter?

The EDID selection allows you to choose between STD (fixed) and TV (downstream) modes. In STD mode, the unit will send a fixed EDID signal to all outputs. In TV mode, the unit will read the EDID of the connected TV and send the appropriate signal to that output.