DF3033ST, DFG3033 Product Application information

DF3033ST, DFG3033 Product Application information
Product Application Information
DF3033ST & DFG3033
Enclosure Design: Install firebox on a solid flat surface. Clearance for air circulation beneath the fireplace insert is pro-
vided by three (3) rubber feet. Ensure that there is at least 1/2” of clearance from any set of louvers on the back at the sides.
Keep combustibles away from the unit using the framing dimensions.
Vented Air: The enclosure MUST NOT block the front/bottom edge or the upper front of the firebox (see diagrams below).
Air is taken in from the lower vents and returned from the upper vents. The firebox may overheat if any of these vents are
obstructed.
Warning: The heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the
heater outlet becomes hot during heater operation. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the unit.
Power cord: The power exits the rear/right side of the firebox. Sufficient clearance must be provided, as well as an exit
hole to access an outlet.
Warning: Ensure the power cord is not installed so that it is pinched or against a sharp edge. Also ensure the power
cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.
Recommended Electrical Specifications
Volts
Wire Gauge
Fuse Rating
Rated Power
Full Power
120 V
14 Ga.
15 A
1000 W
12 A
232 mm
9 18 "
568 mm
22 3 8 "
Louvers
800 mm
31 12 "
Intakes
(Bottom)
22 3 4"
578 mm
Rubber Feet
9 12"
241 mm
31 3 4"
807 mm
Venting
(Front / Top)
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2011 Dimplex North America Limited
7211810100R01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement