Brüel & Kjær 2250 Type 2250 Hand-held Analyzer, 2250 BZ 7222 Sound Level Meter, 2250 BZ 7223 Frequency Analysis, BZ 5503 PC Software, BZ 5298 Environmental Software, Type 4231 Sound Level Calibrator Instruction Manual
Below you will find brief information for Hand-held Analyzer 2250 Type 2250, Sound Level Meter 2250 BZ 7222, Frequency Analysis 2250 BZ 7223. This document describes the setup and operation of 2250 Hand-held Analyzer and its software modules. It includes specifications, test procedures and conformance testing information to help you understand the functionalities and features of this equipment for measuring sound levels and frequency analysis.
PDF
Document
Advertisement
Advertisement
BE1713-11_Cover.fm Page 1 Friday, April 16, 2004 10:57 AM Technical Documentation Hand-held Analyzer Type 2250 With 2250 Sound Level Meter Software BZ 7222 and 2250 Frequency Analysis Software BZ 7223 Instruction Manual HEADQUARTERS: DK-2850 Nærum · Denmark · Telephone: +45 4580 0500 · Fax: +45 4580 1405 · www.bksv.com · [email protected] Australia (+61) 2 9889-8888 · Austria (+43) 1 865 74 00 · Brazil (+55)11 5188-8166 · Canada (+1) 514 695-8225 China (+86) 10 680 29906 · Czech Republic (+420) 2 6702 1100 · Finland (+358) 9-755 950 · France (+33) 1 69 90 71 00 Germany (+49) 421 17 87 0 · Hong Kong (+852) 2548 7486 · Hungary (+36) 1 215 83 05 · Ireland (+353) 1 807 4083 Italy (+39) 0257 68061 · Japan (+81) 3 3779 8671 · Republic of Korea (+82) 2 3473 0605 · Netherlands (+31)318 55 9290 Norway (+47) 66 77 11 55 · Poland (+48) 22 816 75 56 · Portugal (+351) 21 47 11 4 53 · Singapore (+65) 377 4512 Slovak Republic (+421) 25 443 0701 · Spain (+34) 91 659 0820 · Sweden (+46) 8 449 8600 · Switzerland (+41) 1 880 7035 Taiwan (+886) 2 2502 7255 · United Kingdom (+44) 14 38 739 000 · USA (+1) 800 332 2040 Local representatives and service organisations worldwide English BE 1712 – 11 BE171211.book Page i Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 with 2250 Sound Level Meter Software BZ 7222 and 2250 Frequency Analysis Software BZ 7223 From Serial Number 2435900 Instruction Manual BE 1712−11 May 2004 BE171211.book Page ii Thursday, May 27, 2004 1:01 PM Safety Considerations This apparatus has been designed and tested in accordance with IEC 61010 – 1 and EN 61010 – 1 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use. This manual contains information and warnings which must be followed to ensure safe operation and to retain the apparatus in safe condition. Special note should be made of the following: Safety Symbols The apparatus will be marked with this symbol when it is important that you refer to the associated warning statements given in the manual. Protective Earth Terminal Hazardous Voltage Explosion Hazard The equipment is not designed to be used in potentially explosive environments. It should not be operated in the presence of flammable liquids or gases. Warnings • Switch off all power to equipment before connecting or disconnecting their digital interface. Failure to do so could damage the equipment. • Whenever it is likely that the correct function or operating safety of the apparatus has been impaired, it must be made inoperative and be secured against unintended operation. • Any adjustment, maintenance and repair of the open apparatus under voltage must be avoided as far as possible and, if unavoidable, must be carried out only by trained service personnel. Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Pentium is a registered trademark of Intel Corporation or its subsidiaries in the United States and/or other countries. Copyright © 2004, Brüel & Kjær Sound & Vibration Measurement A/S All rights reserved. No part of this publication may be reproduced or distributed in any form, or by any means, without prior written consent from Brüel & Kjær Sound & Vibration Measurement A/S, Nærum, Denmark. BE171211.book Page iii Thursday, May 27, 2004 1:01 PM Table of Contents CHAPTER 1 Introduction .......................................................................................................................................... 1 1.1 1.2 1.3 About This Manual..................................................................................................................................... 1 System Overview....................................................................................................................................... 2 Hardware Setup......................................................................................................................................... 3 CHAPTER 2 Measured Quantities and Parameters ............................................................................................... 7 2.1 2.2 2.3 2.4 2.5 Introduction................................................................................................................................................ Measuring Low-level Sounds .................................................................................................................... Measuring at Low Static Pressure............................................................................................................. Frequency Weightings............................................................................................................................... Measured Quantities ................................................................................................................................. 7 7 8 8 8 CHAPTER 3 Conformance Testing ........................................................................................................................ 15 3.1 3.2 3.3 3.4 3.5 3.6 Introduction.............................................................................................................................................. Mounting for Acoustical Tests ................................................................................................................. Mounting for Mechanical Vibrations Tests............................................................................................... Electrical Substitute for Microphones ...................................................................................................... Testing 1/1-octave-band and 1/3-octave-band Filters ............................................................................. EMC test procedures............................................................................................................................... 15 15 15 15 16 16 CHAPTER 4 Specifications .................................................................................................................................... 19 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 Specifications .......................................................................................................................................... Standards ................................................................................................................................................ Reference Environmental Conditions ...................................................................................................... Reference Conditions for Acoustic Calibration ........................................................................................ Microphone.............................................................................................................................................. Frequency Response .............................................................................................................................. Directional Response .............................................................................................................................. Self-generated Noise............................................................................................................................... Measuring Range .................................................................................................................................... Detectors ................................................................................................................................................. Spectrum Analysis................................................................................................................................... Influence from the Operating Environment.............................................................................................. Electrical Input to Connector Panel of Type 2250 ................................................................................... Electrical Output from Type 2250 ............................................................................................................ Power Supply .......................................................................................................................................... Warm-up Time......................................................................................................................................... Real-time Clock ....................................................................................................................................... CE-mark and C-Tick mark Compliance ................................................................................................... 19 19 19 20 20 20 26 39 41 43 45 47 49 49 50 50 50 51 APPENDIX A Tables ................................................................................................................................................. 53 A.1 A.2 A.3 A.4 Electrical Frequency Responses ............................................................................................................ Free-field Frequency Responses ............................................................................................................ Diffuse-field Frequency Responses......................................................................................................... Directional Responses............................................................................................................................. 53 55 62 66 BE171211.book Page iv Thursday, May 27, 2004 1:01 PM APPENDIX B Cross-references to Standards...................................................................................................... 105 B.1 B.2 B.3 Introduction ........................................................................................................................................... 105 Cross-references to Standards ............................................................................................................. 106 Irrelevant Topics.................................................................................................................................... 111 INDEX......................................................................................................................................................................... 113 BE171211.book Page 1 Thursday, May 27, 2004 1:01 PM 1 Chapter 1 Introduction 1.1 About This Manual This Instruction Manual for Hand-held Analyzer Type 2250, together with User Manual BE 1713, have been created to fulfill the conditions of the following International Standard for Sound Level Meters: • IEC 61672–1 (2002–05), Class 1, Group Z The manuals contain all the information required by clauses 4, 5, 6, 7 and 9 of the above standard. Appendix B of this manual provides cross-references between specific paragraphs in the standards that require topics to be documented, and the corresponding sections in this manual and User Manual BE 1713 that conform to these. This Instruction Manual supplements User Manual BE 1713, and together, the two manuals comprise the full documentation of Type 2250 as required by IEC 61672–1, as well as the earlier standards IEC 60651 and IEC 60804. The User Manual provides all the information necessary for operating Type 2250, descriptions of the measured quantities, and general advice as to proper measurement practices. The User Manual also contains the technical specifications that are most likely to be of practical use when making standard sound-level measurements. This information is not repeated in this manual, except for the specifications, which are given in full here. In the event of any unintended inconsistency between the User Manual and the Instruction Manual, this manual takes precedence. Both printed manuals (Instruction and User) will be supplied with each sound level meter or equivalent instrument that conforms to the specifications of this standard. Consult the relevant User Manual for detailed information on the Outdoor Microphone Kit UA 1404 (BE 1077). 1.1.1 Conventions Used in this Manual Menu items and buttons/tabs used on the screen Indicated by bold type face (for example, as displayed on the Details tab of the Calibration display). Parameter Text Appearing on the Screen Parameters, instructions and descriptions appearing on the screen are indicated by italics (for example, Measurement Mode). BE171211.book Page 2 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 2 1.2 System Overview 1.2.1 Introduction This Instruction Manual describes the Type 2250 Hand-held Analyzer platform, including BZ 7222 Sound Level Meter Software for Type 2250 and BZ 7223 Frequency Analysis Software for Type 2250. The instrument is based on a unique platform concept that allows the user to choose a combination of options, thus ensuring the Type 2250 suits everyones exact needs. The options come in the form of software modules that can be enabled through easily activated software license keys. They can be enabled from the factory, or at a later date, whichever suits the user. The combination of the Sound Level Meter (SLM) module and the Frequency Analysis module ensures that the right measurement platform is created. As a result, the user gets the functionality needed now, plus the option of adding more functionality later on. The software modules are further enhanced by Brüel & Kjær’s post-processing software suite, including BZ 5503 PC Software for Hand-held Analyzers for data transfer, setup and remote display (included), Noise Explorer™ Type 7815 for viewing data, Evaluator™ Type 7820 for assessing environmental noise and Protector™ Type 7825 for assessing workplace noise. All instruments come with the SLM module enabled. This makes Type 2250 into a modern precision, Class 1 Sound Level Meter. It fulfills all the requirements of IEC 61672-1, as well as earlier standards. Type 2250 is delivered with a number of pre-defined measurement and display setups that are tailored to suit specific purposes (for example, external noise measurement). The software includes facilities for calibration procedures for checking the microphone condition. 1.2.2 Optional Software Modules The software modules that are used in Type 2250 can be considered as blocks of optional functionality, that can be enabled by license codes. Each of the software modules exploits the features and specifications of the hardware. The user chooses the combination that suits the current measurement and starts measuring. If the application changes, the user purchases another license code and enables a different software module. All the modules have a planned growth path and are developing continuously with the product. Presently, the only optional software module available is the Frequency Analysis Software Module, BZ 7223, providing real-time analysis of the 1/1- and 1/3- octave filter bands. 1.2.3 Type 2250 PC Software – BZ 5503 A PC software application that incorporates the following features is included with the instrument: • It enables you to create setups, edit them and store them on your PC beforehand, then connect Type 2250 and your PC together to synchronise the data between them • It allows you to setup Type 2250 (before measurements) and retrieve data from Type 2250 (after measurements) for postprocessing and reporting • All settings and data from your jobs on Type 2250 can be displayed, so you can document the measurements made • Retrieved data is stored in a form recognised by Type 7815, 7820 and 7825 software • It allows you to export data to Microsoft® Excel spreadsheets • It enables you to remotely display the Type 2250 screen on your PC This PC software for Hand-held Analyzers comes included on CD-ROM BZ 5298, Environmental Software. BE171211.book Page 3 Thursday, May 27, 2004 1:01 PM CHAPTER 1 Introduction 1.3 3 Hardware Setup This section provides an overview of the hardware components used with Type 2250 Hand-held Analyzer, to fulfill the conditions of IEC 61672-1. This information is covered in more detail in the associated User Manual BE 1713. A hardware overview is provided in Fig.1.1, optional accessories are designated on the diagram. The components included with the Type 2250 are listed in Table 1.1, while the components and accessories that are available but not included with Type 2250 are listed in Table 1.2. The optional accessories listed are approved for use with Type 2250 and likewise conform to the aforementioned standard. BE171211.book Page 4 Thursday, May 27, 2004 1:01 PM 4 Hand-held Analyzer Type 2250 – Instruction Manual Fig.1.1 Hardware Overview Outdoor Microphone Kit UA 1404 UA 1650 90 mm Windscreen with AutoDetect 4189 Microphone ZC 0032 Microphone Preamplifier AO 0441 Microphone ext. cable, 3 m UA1317 Microphone Holder Sound Level Calibrator 4231 AO 0442 Microphone ext. cable, 10 m Accessories for Type 2250 UL 1009 Industrial Grade SD Memory Card for Hand-held Analyzer UA0801 Small Tripod (or UA 0587) BZ 5298 Environmental Software CD incl. PC-software Type 2250 Hand-held Analyzer QB 0061 Rechargeable Battery Pack ZG 0444 Battery Charger for QB 0061 UA 1651 Tripod Extension for Hand-held Analyzer KE 0441 Protective Cover UA 1654 5 extra Styli DH 0696 Wrist Strap KE 0440 Travel Bag for 2250 and Accessories AO 1476 USB Interface Cable 1.8 m UA 0587 Tripod or UA 0801 ZG 0426 Mains Power Supply HT 0015 Earphones AO 0440 Output cable 1.5 m AO 0440 Input cable 1.5 m AO 0440 Trigger Input cable 1.5 m 040031 BE171211.book Page 5 Thursday, May 27, 2004 1:01 PM CHAPTER 1 Introduction Table 1.1 Components included with Type 2250 Table 1.2 Components and accessories not included with Type 2250 Quantity Brüel & Kjær Type/Part Number Description 1 Type 4189 Prepolarized Free-field ½″ Condenser Microphone 1 ZC 0032 Microphone Preamplifier 1 UA 1650 90 mm dia. Windscreen with AutoDetect 1 UA 1651 Tripod Extension for Hand-held Analyzer 1 ZG 0426 Mains Power Supply, 12 V DC, unscreened cable 1 QB 0061 Rechargeable Battery Pack 1 AO 1476 USB Interface Cable, screened 1 HT 0015 Earphones 1 DH 0696 Wrist Strap 1 KE 0440 Travel Bag 1 KE 0441 Protective Cover for Type 2250 1 UA 1654 5 Extra Styli 1 BZ 7222 2250 Sound Level Meter Software (pre-enabled) 1 BZ 5298 Environmental Software, including PC Software for Hand-held Analyzers Quantity Brüel & Kjær Type/Part Number Description 1 AO 0440 Signal Cable, LEMO to BNC, 1.5 m 1 AO 0441 Microphone Extension Cable, 3 m, 10-pin LEMO 1 AO 0442 Microphone Extension Cable, 10 m, 10-pin LEMO 1 UA 0587 Tripod 1 UA 0801 Small Tripod 1 UA 1317 Microphone Holder 1 UA 1404 Outdoor Microphone Kit Type 3592 Outdoor Measuring Gear (see Product Data BP 1744) 1 UL 1009 Industrial Grade SD Memory Card for Hand-held Analyzers 1 ZG 0444 Charger for QB 0061 Battery Pack 1 Type 4231 Sound Level Calibrator (fits in KE 0440) 1 Type 4226 Multifunction Acoustic Calibrator 1 Type 4228 Pistonphone 1 BZ 7223 2250 Frequency Analysis Software 5 BE171211.book Page 6 Thursday, May 27, 2004 1:01 PM 6 Hand-held Analyzer Type 2250 – Instruction Manual BE171211.book Page 7 Thursday, May 27, 2004 1:01 PM 7 Chapter 2 Measured Quantities and Parameters 2.1 Introduction This chapter contains detailed information on the measured quantities and parameters that Type 2250 is capable of measuring. 2.2 Measuring Low-level Sounds If the measured sound level is within the Linear Operating Range or, for C-weighted peak sound levels, within the Peak C Range given in the specifications (see section 4.9.7 and section 4.9.8), then the inherent (self-generated) noise and level linearity problems can be ignored. It is possible to correct the measured sound levels, except peak levels, for the typical inherent noise, found in the specifications, see section 4.8.2. The correction for inherent noise can be made by subtracting inherent noise, Linh, from the total sound level, Ltot, using the following equation: L tot ⁄ 10 L inh ⁄ 10 ⎞ L res = 10lg ⎛ 10 – 10 ⎝ ⎠ If Ltot – Linh is less than 3 dB, the sound level is too low to be compensated. Fig.2.1 Error from inherent noise 7 Error (dB) 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 L tot - L inh [dB] 10 11 12 13 14 15 Fig.2.1 shows the error on the measured sound levels from the presence of inherent noise. The curve can also be used for compensation by subtracting the error from the measured sound levels. This is equivalent to using the formula. BE171211.book Page 8 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 8 2.3 Measuring at Low Static Pressure The frequency response of the microphone depends on the static pressure. Using a Sound Level Calibrator to adjust the sensitivity of a Sound Level Meter at the calibration check frequency provides no information on the influence of static pressure on frequency response. Conformance to the specified standards ensures that the system measures within the standards’ tolerances, in the range from 85 kPa to 108 kPa. Data for the frequency response as a function of static pressure for Microphone Type 4189 can be found in the Microphone Handbook BA 5105. At the calibration check frequency, both the microphones and the recommended Brüel & Kjær Sound Level Calibrator Type 4231 are rather insensitive to variations in the static pressure, for the Sound Level Calibrator Type 4231, below 0.001 dB/kPa. 2.4 Frequency Weightings Both broadband and spectrum measurements can be frequency weighted with A-, C- or Z-weighting. The A- and C-weightings conform to the requirements in IEC 60651 and IEC 61672 – 1. The Z-weighting (Zero frequency weighting) is a linear, unweighted, frequency weighting. It confirms to the Lin response defined in IEC 60651 and the Z-weighting defined in IEC 61672 – 1. Table 2.1 states the design goal frequency responses for the frequency weightings according to IEC 61672 – 1. They are stated for the complete instrument including the microphone. For the A- and C-frequency-weightings, these design goals are equivalent to the ones specified in IEC 60651. The corresponding tolerance limits can be found in the standards. 2.5 Measured Quantities 2.5.1 Introduction All the measured quantities can be displayed on the screen (a transflective, back-lit, 240 × 320 dot matrix, colour touch screen) as numerals, with a resolution of 0.1 dB over the measuring range. See section 4.9 for further information on measurement ranges. 2.5.2 Instantaneous Broadband Measurements These measurements are done continuously, independent of measurement Start, Pause and Stop. They cannot be saved and are only displayed. Overload For Instantaneous Measurements, the Overload indication is displayed as long as the overload condition exists, or for 1 s, whichever is the greater. Overload is indicated as ‘Overload’ on the screen and by a flashing red ‘traffic light’ indicator. Overload is common to all results of Instantaneous Measurements. Under-Range No under-range indication is given because the instrument only has one range, which extends upwards from the inherent noise level. Time-weighted Sound Level, F and S Time-weighted The time-weighted sound level, Lxy(t), is defined as twenty times the logarithm to the base ten of the ratio of a given root-mean-square sound pressure to the reference sound pressure, root-mean-square sound pressure being obtained with a frequency weighting, x, and standard time weighting, y, where: BE171211.book Page 9 Thursday, May 27, 2004 1:01 PM CHAPTER 2 Measured Quantities and Parameters Table 2.1 Frequency weightings according to IEC 61672 – 1, Table 2 Nominal Frequency (Hz) 9 Frequency Weightings (1 decimal) (dB) Exact Frequency (6 digits) (Hz) A C Z 10 10 –70.4 –14.3 0.0 12.5 16 20 12.5893 15.8489 19.9526 –63.4 –56.7 –50.5 –11.2 –8.5 –6.2 0.0 0.0 0.0 25 31.5 40 25.1189 31.6228 39.8107 –44.7 –39.4 –34.6 –4.4 –3.0 –2.0 0.0 0.0 0.0 50 63 80 50.1187 63.0957 79.4328 –30.2 –26.2 –22.5 –1.3 –0.8 –0.5 0.0 0.0 0.0 100 125 160 100 125.893 158.489 –19.1 –16.1 –13.4 –0.3 –0.2 –0.1 0.0 0.0 0.0 200 250 315 199.526 251.189 316.228 –10.9 –8.6 –6.6 0.0 0.0 0.0 0.0 0.0 0.0 400 500 630 398.107 501.187 630.957 –4.8 –3.2 –1.9 0.0 0.0 0.0 0.0 0.0 0.0 800 1000 1250 794.328 1000 1258.93 –0.8 0.0 +0.6 0.0 0.0 0.0 0.0 0.0 0.0 1600 2000 2500 1584.89 1995.26 2511.89 +1.0 +1.2 +1.3 –0.1 –0.2 –0.3 0.0 0.0 0.0 3150 4000 5000 3162.28 3981.07 5011.87 +1.2 +1.0 +0.5 –0.5 –0.8 –1.3 0.0 0.0 0.0 6300 8000 10000 6309.57 7943.28 10000 –0.1 –1.1 –2.5 –2.0 –3.0 –4.4 0.0 0.0 0.0 12500 16000 20000 12589.3 15848.9 19952.6 –4.3 –6.6 –9.3 –6.2 –8.5 –11.2 0.0 0.0 0.0 • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted or S for Slow-weighted The time-weighted sound level is a continuous function of time and is expressed in decibels (dB). Lxy(t) is not displayed, but is the base for Lxy(Tn), Lxy(SPL)(Tn), Lxymax(T) and Lxymin(T). In symbols, frequency-weighted and time-weighted sound level, Lxy(t), at any instant of time, t, is represented by: L xy ( t ) = 20lg where: (1 ⁄ τ) t ∫–∞ px 2 ( ξ )e –(t – ξ) ⁄ τ dξ ⁄ p0 [dB] BE171211.book Page 10 Thursday, May 27, 2004 1:01 PM 10 Hand-held Analyzer Type 2250 – Instruction Manual • τ is the exponential time constant in seconds for time weighting F or S • ξ is a dummy variable of time integration from some time in the past, as indicated by –∞ for the lower limit of the integral, to the time of observation t • px(ξ) is the x frequency-weighted instantaneous sound pressure • p0 is the reference sound pressure, equal to 20 µPa The exponential time constants are stated in Table 2.2. Table 2.2 Exponential time constants and corresponding averaging times Time Weighting Time Constant (seconds) Averaging Time (seconds) Fast 0.125 0.25 Slow 1 2 Time-weighted Sound Level, I Time-weighted The I (Impulse) time-weighted sound level, LxI(t), is defined as ten times the logarithm to base ten of the ratio of a given mean-square sound pressure to the square of the reference sound pressure, p0, followed by a peak detector with a decay time constant of 1500 ms. The mean-square sound pressure being obtained with a frequency weighting, x, and time weighting with a 35 ms time constant, where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • p0 is the reference sound pressure, equal to 20 µPa The I time-weighted sound level is a continuous function of time and is expressed in decibels (dB). LxI(t) is not displayed but is the base for LxI(Tn), LxI(SPL)(Tn), LxImax(T), LxImin(T) and LxIm(T). Instantaneous Time-weighted Sound Level The instantaneous time-weighted sound level, Lxy(Tn), is defined as the time-weighted sound level, Lxy(t), sampled at t = Tn where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted, S for Slow-weighted or I for Impulse-weighted • Tn = t0 +n·∆t • t0 is some starting time • n is an incrementing integer • ∆t is the display update interval The instantaneous time-weighted sound level is, in other words, updated every ∆t second and is expressed in decibels (dB). The symbols used on the screen of Type 2250 for instantaneous time-weighted sound levels are (for A, C and Z frequency-weighting and F, S and I time-weighting): LAF, LAS, LAI, LCF, LCS, LCI, LZF, LZS, LZI. Sound Pressure Level (SPL) The sound pressure level, Lxy(SPL)(Tn), is defined as the greatest time-weighted sound level, Lxy(t), within a time interval starting at t = Tn and ending at t = Tn + ∆t where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted, S for Slow-weighted or I for Impulse-weighted • Tn = t0 + n·∆t • t0 is some starting time • n is an incrementing integer BE171211.book Page 11 Thursday, May 27, 2004 1:01 PM CHAPTER 2 Measured Quantities and Parameters • 11 ∆t is the display update interval, equal to 1 second The sound pressure level is, in other words, updated every 1 second and is expressed in decibels (dB). The symbols used on the screen of Type 2250 for sound pressure levels are (for A, C and Z frequencyweighting and F, S and I time-weighting): LAF(SPL), LAS(SPL), LAI(SPL), LCF(SPL), LCS(SPL), LCI(SPL), LZF(SPL), LZS(SPL), LZI(SPL) 2.5.3 Timed Broadband Measurements These measurements are only executed when Start is activated and are paused when Pause is activated or when Preset Time has expired, whichever occurs first. The time interval between start and pause is the Elapsed Time. During the measurement time interval, intermediate results are displayed as if the measurements were paused at the time of display. When the measurements are paused, the set of results, including Latched Overload and Overload %, are stored under Current Measurement and this is held until either Reset is activated or a new set of measurements are started. The Current Measurement (if any) is displayed and can be saved, together with setup and calibration information, to a project. Latched Overload For the timed measurements, a Latched Overload indication is displayed and included in the set of results if the overload condition exists at any time during the measurement time interval. The latched Overload is indicated by a red triangle on the screen. The Latched Overload is common to all the results of the timed measurements. Overload Percentage The Overload Percentage, Overload %, is defined as the percentage of time within a time interval starting at t = T and ending at t = T + ∆t where the overload condition exists, where: • T is the start time of the measurement, indicated as Start Time • ∆t is the measuring period, indicated as Elapsed Time Under-Range No under-range indication is given because the instrument only has one range, which extends upwards from the inherent noise level. Maximum Time-weighted Sound Level The maximum time-weighted sound level, Lxymax(T), is defined as the greatest time-weighted sound level, Lxy(t), within a time interval starting at t = T and ending at t = T + ∆t where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted, S for Slow-weighted or I for Impulse-weighted • T is the start time of the measurement, indicated as Start Time • ∆t is the measuring period, indicated as Elapsed Time The maximum time-weighted sound level is expressed in decibels (dB). The symbols used on the screen of Type 2250 for maximum time-weighted sound levels are (for A, C and Z frequency-weighting and F, S and I time-weighting): LAFmax, LASmax, LAImax, LCFmax, LCSmax, LCImax, LZFmax, LZSmax, LZImax Minimum Time-weighted Sound Level The minimum time-weighted sound level, Lxymin(T), is defined as the smallest time-weighted sound level, Lxy(t), within a time interval starting at t = T and ending at t = T + ∆t where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted BE171211.book Page 12 Thursday, May 27, 2004 1:01 PM 12 Hand-held Analyzer Type 2250 – Instruction Manual • y is F for Fast-weighted, S for Slow-weighted or I for Impulse-weighted • T is the start time of the measurement, indicated as Start Time • ∆t is the measuring period, indicated as Elapsed Time The minimum time-weighted sound level is expressed in decibels (dB). The symbols used on the screen of Type 2250 for maximum time-weighted sound levels are (for A, C and Z frequency-weighting and F, S and I time-weighting): LAFmin, LASmin, LAImin, LCFmin, LCSmin, LCImin, LZFmin, LZSmin, LZImin Equivalent Continuous Sound Level The equivalent continuous sound level (also called time-average sound level), Lxeq(T), is defined as twenty times the logarithm to base ten of the ratio of a root-mean-square sound pressure during a time interval to the reference sound pressure, sound pressure being obtained with a frequency weighting, x. The time interval is starting at t = T and ending at t = T + ∆t where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • T is the start time of the measurement, indicated as Start Time • ∆t is the averaging time interval, indicated as Elapsed Time The equivalent continuous sound level is expressed in decibels (dB). In symbols, equivalent continuous sound level, Lxeq(T), is given by: L xeq ( T ) = 20lg ( 1 ⁄ ∆t ) T + ∆t ∫T 2 p x ( ξ )dξ ⁄ [dB] p0 where: • ξ is a dummy variable of time integration over the averaging time interval • px(ξ) is the x frequency-weighted instantaneous sound pressure • p0 is the reference sound pressure, equal to 20 µPa The symbols used on the screen of Type 2250 for equivalent continuous sound levels are (for A, C and Z frequency-weighting): LAeq, LCeq, LZeq Equivalent Continuous I-weighted Sound Level The equivalent continuous I-weighted sound level (also called average I-weighted sound level), LxIeq(T), is defined as ten times the logarithm to base ten of the mean of ten to the power of the I timeweighted sound level, LxI(t), divided by ten during a time interval. The time interval is starting at t = T and ending at t = T + ∆t where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • T is the start time of the measurement, indicated as Start Time • ∆t is the averaging time interval, indicated as Elapsed Time The equivalent continuous I-weighted sound level is expressed in decibels (dB). In symbols, equivalent continuous I-weighted sound level, LxIeq(T), is given by: L xIeq ( T ) = 10lg ( 1 ⁄ ∆t ) T + ∆t ∫T 10 L xI ( ξ ) ⁄ 10 dξ [dB] where: • ξ is a dummy variable of time integration over the averaging time interval BE171211.book Page 13 Thursday, May 27, 2004 1:01 PM CHAPTER 2 Measured Quantities and Parameters 13 The symbols used on the screen of Type 2250 for equivalent continuous I-weighted sound levels are (for A, C and Z frequency-weighting): LAIeq, LCIeq, LZIeq Peak Sound Level The peak sound level, Lxpeak(T), is defined as twenty times the logarithm to base ten of the ratio of the greatest absolute instantaneous sound pressure, px(t), within a time interval starting at t = T and ending at t = T + ∆t, to the reference sound pressure, p0, instantaneous sound pressure being obtained with a frequency weighting, x, where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • px(t) is the x frequency-weighted instantaneous sound pressure • p0 is the reference sound pressure, equal to 20 µPa • T is the start time of the measurement, indicated as Start Time • ∆t is the measuring period, indicated as Elapsed Time The maximum peak sound level is expressed in decibels (dB). The symbols used on the screen of Type 2250 for peak sound levels are (for A, C and Z frequencyweighting): LApeak, LCpeak, LZpeak 2.5.4 Spectrum Measurements Note: These measurements require Frequency Analysis Software BZ 7223. The definition of the measured quantities is the same as for the broadband measurements. At low frequency bands the exponential time constants for Fast-weighting are modified to get a reasonable B*T product, see section 4.11.5. 2.5.5 Instantaneous Spectrum Measurements Note: These measurements require Frequency Analysis Software BZ 7223. The Instantaneous Spectrum Measurements can measure instantaneous time-weighted sound level Lxy, where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted or S for Slow-weighted Overload is common to the broadband measurements. No Under-Range is indicated. 2.5.6 Timed Spectrum Measurements Note: These measurements require Frequency Analysis Software BZ 7223. The Timed Spectrum Measurements can measure minimum time-weighted sound level, Lxymin, maximum time-weighted sound level, Lxymax, and equivalent continuous sound level, Lxeq, where: • x is A for A-weighted, C for C-weighted or Z for Z-weighted • y is F for Fast-weighted or S for Slow-weighted Latched Overload and Overload Percentage is common to the broadband measurements. No Under-Range is indicated. BE171211.book Page 14 Thursday, May 27, 2004 1:01 PM 14 Hand-held Analyzer Type 2250 – Instruction Manual BE171211.book Page 15 Thursday, May 27, 2004 1:01 PM 15 Chapter 3 Conformance Testing 3.1 Introduction This chapter contains the information needed to conduct conformance testing according to the specified standards. 3.2 Mounting for Acoustical Tests For acoustical tests, it is important that the test rig for mounting the microphone to be tested is designed to minimise the influence of reflections to a level that is comparatively smaller than the test parameter’s maximum Expanded Uncertainties of Measurement. This has to be demonstrated with a good, known laboratory microphone. Various ways in which the different microphone assemblies can be mounted to the test rig are: 3.3 • Microphone Type 4189 on Microphone Preamplifier ZC 0032 can be mounted in the ½″ Microphone Holder UA 1317. The Microphone Holder can be mounted using the tripod mount thread. To minimise the influence of reflections from the Microphone Holder, bend the holder part to an angle of 45° ± 15° from the straight position • Outdoor Microphone Kit UA 1404 can be mounted using the tripod mount thread in the Mounting Ring Mounting for Mechanical Vibrations Tests Only the microphone and preamplifier assembly contributes significantly to the sensitivity to mechanical vibrations. Therefore, only this assembly has to be tested. Microphone Type 4189 and Microphone Preamplifier ZC 0032 assembly is mounted on the shaker with a suitable holder so that the vibration is applied in a direction perpendicular to the plane of the microphone diaphragm. 3.4 Electrical Substitute for Microphones To obtain a BNC type electrical input, replace the Type 4189 microphone with a WA0302-B, 15 pF, fitted with a UA 0245 adaptor. Electrical specifications obtained when introducing signals in this way are equal to the specifications given in section 4.13. All electrical inputs can be short-circuited when needed for test. BE171211.book Page 16 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 16 3.5 Testing 1/1-octave-band and 1/3-octave-band Filters When testing the octave-band filter sets according to IEC 61260, the rear ‘Input’ socket on Type 2250 should be used. All tests according to IEC 61260 must be conducted with Spectrum frequency-weighting set to ‘Z’. (Frequency Analysis Software BZ 7223 required.) Note 1: When testing relative attenuation according to IEC 61260 paragraph 5.3, the input level must be within 1 dB of the upper boundary of the Linear Operating Range. This could lead to overload indications in the frequency range 1 to 8 kHz. These overload indications come from the A-frequencyweighting filters and have no influence on the performance of the octave-band filter sets, as long as there is no overload at 1 kHz. To reduce this phenomenon, it is advisable to conduct the test at 1 dB below the upper boundary of the Linear Operating Range. Note 2: In order to measure without any correction for sound field or windscreen, set Microphone Type to Unknown for the transducer in use in the Transducers setup. (i.e., Transducers selected from the Main Menu.) This will not affect the current calibration. 3.6 EMC test procedures 3.6.1 Signal Source for Immunity Test The acoustic signal, which is used during the Immunity test, is applied to the microphone through a ½ ″ plastic hose (a normal water hose) – from a source outside the test room. In this way, the acoustic source is not affected by the RF field. The source may be a normal entertainment earphone. Fig.3.1 Setting up the signal source for an immunity test Microphone assembly (windscreen removed) Water hose 50 dB SPL inside Acoustic Compacted attenuator paper tissue Water hose to acoustic source >90 dB SPL inside 020099 To prevent the acoustic source from being affected by acoustic noise in the surroundings, the following method can be used: • 3.6.2 Insert an acoustic attenuator in the hose close to the microphone, so that the sound pressure within the greater part of the hose is held far above the surrounding sound level. The acoustic attenuator can easily be made from a short piece of metal tubing with an outer diameter of ½ ″. Squeeze a piece of paper tissue into the tube, and compress it until the desired attenuation is obtained. Up to 40 to 60 dB of acoustic attenuation can be obtained. Reference Orientation Fig.3.2 shows the reference orientation relative to the RF-emitter/receiver that is common to both Emission and Immunity tests. BE171211.book Page 17 Thursday, May 27, 2004 1:01 PM CHAPTER 3 Conformance Testing 17 Fig.3.2 Reference orientation of Type 2250 relative to the RF-emitter/receiver 040139 3.6.3 Securing of Microphone Cables during EMC Test The cable arrangement is common for both the Emission and Immunity tests. During test, any excessive cable is folded back on itself in an even number of figure eights, as indicated in Fig.3.2. The microphone and preamplifier assembly is arranged approximately 25 cm above Hand-held Analyzer Type 2250, with the Microphone facing the RF source. 3.6.4 Accessories Detailed part descriptions including power supplies, cable types, cable lengths and microphone accessories are given in Chapter 1 of this manual (see Fig.1.1, Table 1.1 and Table 1.2). Windscreens have no influence on Emission and Immunity, but the metal parts of UA 1404 change the resonance frequencies of the microphone and preamplifier assembly. Therefore, measurements must be taken with UA 1404 mounted, but without the windscreen and raincover mounted. 3.6.5 Testing EMC According to IEC 60804 The exponential time-averaged detectors in Hand-held Analyzer Type 2250 are digital, and their results are calculated based on the same samples that are used for calculating the linear time-averaged detectors. Therefore, the LxF measurement values will be equal to short Lxeq values when measuring steady signal levels. For this reason, measurement of LxF must be utilised during test for Immunity to RF signals when testing according to both IEC 60651 and IEC 60804. That is to say, only one test has to be carried out and no special operating mode giving a short duration Lxeq measurement is provided. 3.6.6 Normal Mode of Operation during EMC Test The hardware configurations for the normal mode of operation are defined in section 1.3. Emission The greatest level of radio frequency emission is radiated from Hand-held Analyzer Type 2250 when set up as follows: 1) Connect Microphone Type 4189 and Microphone Preamplifier ZC 0032 to the top socket of Type 2250. 2) Select the Sound Level Meter Project Template. 3) On the Setup display: • Set Measurement Mode to Manual • Set Input to Top Socket • Set Micr. Used to the mounted microphone BE171211.book Page 18 Thursday, May 27, 2004 1:01 PM 18 Hand-held Analyzer Type 2250 – Instruction Manual 4) Start the measurement and let it run during test. Immunity as Sound Level Meter The highest Susceptibility (Susceptibility = 1/Immunity) to radio frequency fields, is achieved when Hand-held Analyzer Type 2250 is set up as follows: 1) Connect Microphone Type 4189 and Microphone Preamplifier ZC 0032 to the top socket of Type 2250. 2) Select the Sound Level Meter Project Template. 3) On the Setup display: • Set Frequency Weightings to AZ for Broadband (Excl. Peak) • Set Measurement Mode to Manual • Set Input to Top Socket • Set Micr. Used to the mounted microphone 4) Calibrate the microphone. 5) Start the measurement and let it run during test. 6) Observe LAF during test. Testing Immunity According to IEC 61260 Note: This test requires Frequency Analysis Software BZ 7223. The highest Susceptibility (Susceptibility = 1/Immunity) to radio frequency fields for the filter sets is achieved when Hand-held Analyzer Type 2250 is set up as follows: 1) Short-circuit the rear ‘Input’ socket of Type 2250. 2) Select the Frequency Analyzer Project Template. 3) On the Setup display: • Set Frequency Weightings to CZ for Broadband (Excl. Peak) and to Z for Spectrum • Set Measurement Mode to Manual • Set Bandwidth to 1/3-octave • Set Input to Rear Socket • Set Micr. Used to No Transducer 4) Calibrate the input by typing in the Nominal Sensitivity of the microphone: 0.05. 5) Start the measurement and let it run during test. 6) Observe LZF at 1 kHz during test. Only 1/3-octave-band filters need to be tested. This is because the filters are digital, and no disturbance at the filter input will show up to be greater at 1/1-octave bandwidth than at 1/3-octave bandwidth. BE171211.book Page 19 Thursday, May 27, 2004 1:01 PM 19 Chapter 4 Specifications 4.1 Specifications Specifications are given for the configuration detailed in Chapter 1. Unless specifically noted, specifications are given as typical data under Reference Environmental Conditions, and with the system calibrated to the nominal microphone sensitivity. Note: The L-weighting is equivalent to the Z-weighting defined in IEC 61672–1, see section 2.4. 4.2 Standards Hand-held Analyzer Type 2250 conforms to the following International Standards and Classes/Types/ Groups with the accessories specified in Fig.1.1, along with BZ 7222 Sound Level Meter software module and BZ 7223 Frequency Analysis Software module: • IEC 60651 (1979) plus Amendment 1 (1993–02) and Amendment 2 (2000–10), Type 1, Group Z • IEC 60804 (2000-10), Type 1, Group Z • IEC 61672-1 (2002-05), Class 1, Group Z • DIN 45657 (1997-07) • ANSI S1.4 –1983 (R 1997) plus ANSI S1.4A -1985 Amendment, Type 1 • ANSI S1.43 –1997, Type 1 Hand-held Analyzer Type 2250 conforms to the following International Standards and Classes/Types/ Groups with the accessories specified in Fig.1.1 and BZ 7223 Frequency Analysis Software module: • IEC 61260 (1995-07) plus Amendment 1 (2001-09), 1/1-octave Bands and 1/3-octave Bands, Class 0, Group Z, all filters and both channels • ANSI S1.11 –1986 (R 1993), 1/1-octave Bands and 1/3-octave Bands, Order 3, Type 0-C, Optional Range In the text elsewhere in this manual, references to these standards are shortened to the standards name but are to be understood as the full text above. The International IEC Standards are adopted as European standards by CENELEC. When this happens, the letters IEC are replaced with EN and the number is retained. Type 2250 also conforms to these EN Standards. 4.3 Reference Environmental Conditions Air temperature: 23°C Static pressure: 101.325 kPa Relative humidity: 50% BE171211.book Page 20 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 20 4.4 Reference Conditions for Acoustic Calibration Reference range: Only one range exists and this is the reference range Reference sound pressure level: 94.00 dB re 20 µPa Reference frequency: 1 kHz 4.5 Microphone Microphone Type 4189 and Preamplifier Type ZC 0032: Type: Prepolarized Free-field ½ ″ Condenser Microphone Nominal Open Circuit Sensitivity: 50 mV/Pa, (corresponding to –26 dB re 1 V/Pa) ± 1.5 dB Capacitance: 13 pF (at 250 Hz) Nominal preamplifier attenuation: 0.25 dB Extension cables between Type ZC 0032 and Type 2250: Up to 100 m without affecting measurements. Note: EMC is only tested with a 10 m cable (AO 0442) Microphone reference point: The centre of the front surface of the microphone protection grid. With UA 1404 mounted, this point can be difficult to find. Therefore, it is marked on the windscreen Reference direction of sound incidence: See Fig.4.14 to Fig.4.15 4.6 Frequency Response The frequency responses are given in tabular form in Appendix A and in graphical form in this section. The Expanded Uncertainties of Measurement in the tables are the two-sigma limits maintained in the Brüel & Kjær production for the specific product. This means that the correct value lies in the range of the measured value plus/minus the Expanded Uncertainties of Measurement with a probability of 95%. Note: This range is not related to the production spread. The range is for a specific typical unit. The factory acceptance tests at Brüel & Kjær ensure that the ranges for all units are within the IEC 61672–1 limits. The IEC 61672–1 limits, reduced by the Maximum Expanded Uncertainties of Measurement from Appendix A of IEC 61672–1, are also drawn in the graphs. These Maximum Expanded Uncertainties of Measurement are the maximum uncertainties that a test organisation may have on its measurements when it performs conformance tests according to IEC 61672. 4.6.1 Electrical Frequency Responses The electrical frequency response depends on the selected frequency weighting, see Fig.4.1. The Z-weighted electrical frequency response is given in the "Electrical Response" column of the appropriate tables of Table A.2 to Table A.9 in Appendix A. The electrical frequency responses are valid both for introduction of the electrical signal through the recommended means to substitute the microphone with an electrical input facility (see section 3.4) and for the rear ‘Input’ socket. Z-weighted frequency range: ±0.15 dB, 11 Hz to 22 kHz Extended low frequency range: ±0.15 dB, 4 Hz to 22 kHz BE171211.book Page 21 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications Fig.4.1 21 Electrical frequency response of Hand-held Analyzer Type 2250 with the Microphone Type parameter set to ‘Unknown’ (in the Transducers display) for the transducer used, see also Table A.1 Frequency weightings 10 dB L 0 dB -10 dB C -20 dB A -30 dB -40 dB -50 dB -60 dB 10 Hz 100 Hz 1 kHz 10 kHz 020157 Fig.4.2 Deviations from the ideal electrical frequency response with the Microphone Type parameter set to ‘Unknown’ (in the Transducers display) for the transducer used, see Table A.1. Reduced IEC 61672–1 limits are also drawn on the graph Uncompensated 3 dB 2 dB A,C 1 dB 0 dB L -1 dB -2 dB -3 dB 10 Hz 100 Hz 1 kHz 10 kHz 020158 4.6.2 Acoustic Frequency Responses As can be seen from Fig.4.2, the deviations from the ideal frequency weightings for the A- and Cweightings differ only slightly at very high frequencies from the deviations for the Z-weighting. The Z-weighting is included in the data given in section 4.6.4, section 4.6.5 and Appendix A. Thus the A- and C-weighted free-field and diffuse-field frequency responses can be found by adding the ideal A- and C-weighted responses to the responses given in section 4.6.4, section 4.6.5 and Appendix A. BE171211.book Page 22 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 22 4.6.3 Fig.4.3 Low-frequency Responses Low-frequency response of Hand-held Analyzer Type 2250 (including Microphone Type 4189) 2 1 Response (dB) 0 -1 -2 -3 -4 1 Normal 2250+ZC0032+4189 Extended 2250+ZC0032+4189 Normal Electrical Input Socket Extended Electrical Input Socket IEC Class 0 IEC Class 0 4.6.4 100 10 Frequency (Hz) 040162 Free-field Frequency Responses The Free-field Frequency responses for plane progressive sinusoidal sound waves incident from the reference direction with Z-frequency-weighting are provided in Fig.4.4 to Fig.4.9. Fig.4.4 Free-field frequency response of Microphone Type 4189 only, with sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’, and the Windscreen Correction parameter set to ‘None’, see Table A.2. Reduced IEC 61672–1 limits are also drawn on the graph. dB 4 2 0 -2 -4 100 1000 10000 Hz 040163 BE171211.book Page 23 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications Fig.4.5 23 Influence of Hand-held Analyzer body on free-field response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) with the sound field at 0° angle of incidence to the microphone. Reduced IEC 61672–1 limits are also drawn on the graph. dB 4 2 0 -2 -4 100 1000 10000 Hz 040164 Fig.4.6 Free-field frequency response of Hand-held Analyzer Type 2250 (including Microphone Type 4189) and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘None’, see Table A.3 Reduced IEC 61672–1 limits are also drawn on the graph.. dB 4 2 0 -2 -4 100 1000 10000 Hz 040165 Fig.4.7 Free-field frequency response of Microphone Type 4189 only, with Windscreen UA 1650 fitted and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’, see Table A.4. Reduced IEC 61672–1 limits are also drawn on the graph ] dB 4 2 0 -2 -4 100 1000 10000 Hz 040167 BE171211.book Page 24 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 24 Fig.4.8 Free-field frequency response of Hand-held Analyzer Type 2250 (including Microphone Type 4189), Windscreen UA 1650 fitted and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’, see Table A.5. dB 4 2 0 -2 -4 100 1000 10000 Hz 040168 Fig.4.9 Free-field frequency response of Microphone Type 4189, with sound field at 0° angle of incidence to the microphone and Outdoor Microphone Kit UA 1404 fitted. Sound Field Correction parameter set to ‘Freefield’ and the Windscreen Correction parameter set to ‘UA 1404’. See Table A.6. Reduced IEC 61672–1 limits are also drawn on the graph. dB 4 2 0 -2 -4 100 1000 10000 Hz 040170 4.6.5 Diffuse-field Frequency Responses The Diffuse-field frequency responses (also called random-incidence frequency responses) with Zfrequency-weighting are provided in Fig.4.10 to Fig.4.12. BE171211.book Page 25 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 25 Fig.4.10 Diffuse-field frequency response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Sound Field Correction parameter set to ‘Diffuse-field’ and the Windscreen Correction parameter set to ‘None’, see Table A.7. Reduced IEC 61672–1 limits are also drawn on the graph dB 4 2 0 -2 -4 100 1000 10000 Hz 040171 Fig.4.11 Diffuse-field frequency response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Windscreen UA 1650 fitted, Sound Field Correction parameter set to ‘Diffuse-field’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’, see Table A.8. Reduced IEC 61672–1 limits are also drawn on the graph dB 4 2 0 -2 -4 100 1000 10000 Hz 040173 Fig.4.12 Diffuse-field frequency response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, Sound Field Correction parameter set to ‘Diffuse-field’ and the Windscreen Correction parameter set to UA 1404, see Table A.9. Reduced IEC 61672–1 limits are also drawn on the graph dB 4 2 0 -2 -4 100 1000 10000 Hz 040175 BE171211.book Page 26 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 26 4.6.6 Free-field Frequency Responses for Diffuse-field Calibrated Instruments According to IEC 60651 and IEC 60804, the free-field frequency response in the reference direction for diffuse-field calibrated instruments must be specified. This response is given in the “Electrical Response” column of Table A.7. 4.7 Directional Response This section gives directional responses for plane progressive sinusoidal sound waves normalised to the response in the reference direction. BE171211.book Page 27 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications Fig.4.13 Directional response for Microphone Type 4189 only. See Table A.10 to Table A.12. a) 330° 0° 5 dB 0 b) 330° 30° 300° 60° -10 -15 -20 -20 -25 90° 240° -25 270° 120° 210° 150° 330° 0° 5 dB 0 d) 30° 330° -5 300° 0° 5 dB 0 300° -15 -20 -20 -25 90° 240° 120° 150° 180° 60° -10 -15 210° 30° -5 60° -10 270° 150° 180° 180° c) 90° 240° 120° 210° 60° -10 -15 270° 30° -5 -5 300° 0° 5 dB 0 -25 270° 90° 240° 120° 210° 150° 180° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040176 27 BE171211.book Page 28 Thursday, May 27, 2004 1:01 PM 28 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.14 Sensitivity variations of Microphone Type 4189 (only) at sound incidence angles within ±θ ° from the reference direction. See Table A.13. Reduced IEC 61672–1 limits are also drawn on the graph dB ± 30° 20 15 10 5 0 100 1000 10000 dB Hz ± 90° 20 15 10 5 0 100 1000 10000 dB Hz ± 150° 20 15 10 5 0 100 1000 10000 Hz 040177 BE171211.book Page 29 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 29 Fig.4.15 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, see Table A.20 to Table A.22. a) 330° 0° 5 dB 0 b) 0° 5 dB 0 330° 30° -5 -5 300° 300° 60° -10 -15 -20 -20 90° 240° -25 270° 120° 210° 150° 150° 180° 180° c) 330° 0° 5 dB 0 d) 30° 0° 5 dB 0 330° 60° -10 300° -15 -20 -20 -25 90° 240° 120° 210° 60° -10 -15 270° 30° -5 -5 300° 90° 240° 120° 210° 60° -10 -15 -25 270° 30° 150° -25 270° 90° 240° 120° 210° 150° 180° 180° 0° 270° 90° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040180 BE171211.book Page 30 Thursday, May 27, 2004 1:01 PM 30 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.16 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, see Table A.23 to Table A.25. a) 330° 0° 5 dB 0 b) 0° 5 dB 0 330° 30° -5 -5 300° 300° 60° -10 -15 -20 -20 -25 90° 240° -25 270° 120° 210° 150° 150° 180° 180° c) 330° 0° 5 dB 0 d) 30° 0° 5 dB 0 330° 60° -10 300° -15 -20 -20 90° 240° 120° 210° 150° 60° -10 -15 -25 270° 30° -5 -5 300° 90° 240° 120° 210° 60° -10 -15 270° 30° -25 270° 90° 240° 120° 210° 150° 180° 180° 0° 270° 90° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040181 BE171211.book Page 31 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 31 Fig.4.17 Sensitivity variations of Hand-held Analyzer Type 2250 (including Microphone Type 4189) at sound incidence angles within ±θ ° from the reference direction, see Table A.26. Reduced IEC 61672–1 limits are also drawn on the graph dB ± 30° 20 15 10 5 0 100 1000 10000 dB Hz ± 90° 20 15 10 5 0 100 1000 10000 dB Hz ± 150° 20 15 10 5 0 100 1000 10000 Hz 040182 BE171211.book Page 32 Thursday, May 27, 2004 1:01 PM 32 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.18 Directional response for Microphone Type 4189 only, with Windscreen UA 1650 fitted, see Table A.30 to Table A.32. a) 330° 0° 5 dB 0 b) 330° 30° 300° 60° -10 -15 -20 -20 -25 90° 240° -25 270° 120° 210° 150° 330° 0° 5 dB 0 d) 30° 330° -5 300° 0° 5 dB 0 300° -15 -20 -20 -25 90° 240° 120° 150° 180° 60° -10 -15 210° 30° -5 60° -10 270° 150° 180° 180° c) 90° 240° 120° 210° 60° -10 -15 270° 30° -5 -5 300° 0° 5 dB 0 -25 270° 90° 240° 120° 210° 150° 180° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040184 BE171211.book Page 33 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 33 Fig.4.19 Sensitivity variations of Microphone Type 4189 only, with Windscreen UA 1650 fitted, at sound incidence angles within ±θ ° from the reference direction, see Table A.33. Reduced IEC 61672–1 limits are also drawn on the graph. dB ± 30° 20 15 10 5 0 100 1000 10000 dB Hz ± 90° 20 15 10 5 0 100 1000 10000 dB Hz ± 150° 20 15 10 5 0 100 1000 10000 Hz 040185 BE171211.book Page 34 Thursday, May 27, 2004 1:01 PM 34 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.20 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the Hand-held Analyzer’s display, see Table A.34 to Table A.36. a) 330° 0° 5 dB 0 b) 0° 5 dB 0 330° 30° -5 -5 300° 300° 60° -10 -15 -20 -20 -25 90° 240° -25 270° 120° 210° 150° 150° 180° 180° c) 330° 0° 5 dB 0 d) 30° 0° 5 dB 0 330° 60° -10 300° -15 -20 -20 90° 240° 120° 210° 150° 60° -10 -15 -25 270° 30° -5 -5 300° 90° 240° 120° 210° 60° -10 -15 270° 30° -25 270° 90° 240° 120° 210° 150° 180° 180° 0° 270° 90° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040186 BE171211.book Page 35 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 35 Fig.4.21 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, see Table A.37 to Table A.39. a) 330° 0° 5 dB 0 b) 0° 5 dB 0 330° 30° -5 -5 300° 300° 60° -10 -15 -20 -20 90° 240° -25 270° 120° 210° 150° 150° 180° 180° c) 330° 0° 5 dB 0 d) 30° 0° 5 dB 0 330° 60° -10 300° -15 -20 -20 90° 240° 120° 210° 150° 60° -10 -15 -25 270° 30° -5 -5 300° 90° 240° 120° 210° 60° -10 -15 -25 270° 30° -25 270° 90° 240° 120° 210° 150° 180° 180° 0° 270° 90° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040187 BE171211.book Page 36 Thursday, May 27, 2004 1:01 PM 36 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.22 Sensitivity variations of Hand-held Analyzer Type 2250 (including Microphone Type 4189) and Windscreen UA 1650 fitted, at sound incidence angles within ±θ ° from the reference direction, see Table A.40. Reduced IEC 61672–1 limits are also drawn on the graph. dB ± 30° 20 15 10 5 0 100 1000 10000 dB Hz ± 90° 20 15 10 5 0 100 1000 10000 dB Hz ± 150° 20 15 10 5 0 100 1000 10000 Hz 040188 BE171211.book Page 37 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 37 Fig.4.23 Directional response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, see Table A.44 to Table A.46. a) 330° 0° 5 dB 0 b) 330° 30° 300° 60° -10 -15 -20 -20 90° 240° -25 270° 120° 210° 150° 330° 0° 5 dB 0 d) 30° 330° 60° -10 300° -15 -20 -20 90° 240° 120° 210° 30° 150° 180° 60° -10 -15 -25 270° 0° 5 dB 0 -5 -5 300° 150° 180° 180° c) 90° 240° 120° 210° 60° -10 -15 -25 270° 30° -5 -5 300° 0° 5 dB 0 -25 270° 90° 240° 120° 210° 150° 180° a: 630 Hz, b: 1600 Hz, c: 4000 Hz, d: 10000 Hz a: 800 Hz, b: 2000 Hz, c: 5000 Hz, d: 12500 Hz a: 1000 Hz, b: 2500 Hz, c: 6300 Hz, d: 16000 Hz a: 1250 Hz, b: 3150 Hz, c: 8000 Hz, d: 20000 Hz 040190 BE171211.book Page 38 Thursday, May 27, 2004 1:01 PM 38 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.24 Sensitivity variations of Microphone Type 4189 only and Outdoor Microphone Kit UA 1404 fitted, at sound incidence angles within ±θ ° from the reference direction, see Table A.47. Reduced IEC 61672–1 limits are also drawn on the graph. dB ± 30° 20 15 10 5 0 100 1000 10000 dB Hz ± 90° 20 15 10 5 0 100 1000 10000 dB Hz ± 150° 20 15 10 5 0 100 1000 10000 Hz 040191 BE171211.book Page 39 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 4.8 Self-generated Noise Self-generated noise is given for nominal microphone Open Circuit Sensitivity. 4.8.1 Maximum Broadband Self-generated Noise Table 4.1 Maximum Broadband Self-generated Noise Frequency Weighting (dB) A-weighting C-weighting Z-weightinga Z-weightinga Extended Low Frequency Microphone 16.1 15.0 16.8 16.8 Electrical 15.7 16.3 21.4 28.4 Total 18.9 18.7 22.7 28.7 Maximum Noise a. 30 seconds LZeq 4.8.2 Typical Broadband Self-generated Noise Table 4.2 Typical Broadband Self-generated Noise Frequency Weighting (dB) Maximum Noise Z-weightinga Extended Low Frequency C-weighting Z-weighting Microphone 14.6 13.5 15.3 15.3 Electrical 12.5 13.1 18.1 25.5 Total 16.7 16.3 19.9 25.9 a. 30 seconds LZeq 4.8.3 a A-weighting Typical Self-generated Noise Spectra Typical spectra for self-generated noise are shown in Fig.4.25 and Fig.4.26. 39 BE171211.book Page 40 Thursday, May 27, 2004 1:01 PM 40 Hand-held Analyzer Type 2250 – Instruction Manual Fig.4.25 Typical self-generated noise, 1/1-octave band Fig.4.26 Typical self-generated noise, 1/3-octave band BE171211.book Page 41 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 4.9 41 Measuring Range Note: Type 2250 has a single measuring range. The instrument, therefore, has no measuring range (or level range) controls. The Upper Limit in the following sections is based on the guaranteed worst-case limit for Type 2250 and the nominal Open Circuit Sensitivity of the microphone. The Overload Limit can, due to tolerances in Type 2250, be up to 1.5 dB higher than the worst-case limit, but tolerances specified in the International Standards are maintained as long as no Overload is indicated. The Overload Limit is equal to the Max. Input Level as displayed on the Details tab of the Calibration display, selected from the Main Menu. The Lower Limit in the following sections is based on the guaranteed worst-case limit for Type 2250 and the nominal Open Circuit Sensitivity of the microphone, under Reference Environmental Conditions. 4.9.1 Maximum Sound Level The maximum Sound Level that the Sound Level Meter can accomodate without causing damage to the Sound Level Meter: 159 dB 4.9.2 Total Range The difference between the Upper Limit on the least sensitive level range, and the lowest sound pressure level measurable on the most sensitive level range, which can be measured at 1 kHz within the most conservative tolerance limits, specified in the International Standards IEC 60651, IEC 60804 and IEC 61672–1: Table 4.3 Total range 4.9.3 Frequency Weighting A-weighting (dB) C-weighting (dB) Z-weighting (dB) Z-weighting (dB) Extended Low Frequency 140 – 26.6 140 – 27.5 140 – 32.6 140 – 39.6 Primary Indicator Range Primary Indicator Range according to the International Standard IEC 60651: Table 4.4 Primary Indicator Range Lower Limit Upper Limit (dB) A-weighting (dB) C-weighting (dB) Z-weighting (dB) Z-weighting (dB) Extended Low Frequency 125 25.7 26.3 31.4 38.4 BE171211.book Page 42 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 42 4.9.4 Indicator Range Indicator Range according to the International Standard IEC 60804: Table 4.5 Indicator Range 4.9.5 Lower Limit Upper Limit (dB) A-weighting (dB) C-weighting (dB) Z-weighting (dB) Z-weighting (dB) Extended Low Frequency 140 25.7 26.3 31.4 38.4 Linearity Range Linearity Range according to the International Standard IEC 60804 is the difference between the Upper and Lower Limit in the following table: Table 4.6 Linearity Range 4.9.6 Lower Limit Upper Limit (dB) A-weighting (dB) C-weighting (dB) Z-weighting (dB) Z-weighting (dB) Extended Low Frequency 140 23.7 24.3 29.4 36.4 Pulse Range Pulse Range according to the International Standard IEC 60804 is the difference between the Upper and Lower Limit in the following table: Table 4.7 Pulse Range 4.9.7 Lower Limit Upper Limit (dB) A-weighting (dB) C-weighting (dB) Z-weighting (dB) Z-weighting (dB) Extended Low Frequency 143 23.7 24.3 29.4 36.4 Linear Operating Range Note: Type 2250 has a single operating range. The starting point for all the Linear Operating Range tests is 94.0 dB. Linear Operating Range according to the International Standard IEC 61672–1: BE171211.book Page 43 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications Table 4.8 Linear Operating Range 4.9.8 Lower Limit Upper Limit FrequencyWeighting 43 31.5 Hz (dB) 1 kHz (dB) 4 kHz (dB) 8 kHz (dB) 12.5 kHz (dB) All (dB) A-weighting 100.6 140 140 138.9 135.7 26.9 C-weighting 137.0 140 139.2 137.0 133.8 27.5 Z-weighting 140 140 140 140 140 32.6 Z-weighting Extended Low Frequency 140 140 140 140 140 39.6 Peak C Range Peak C Range according to the International Standard IEC 61672-1 is: 143 – 31.3 dB 4.10 Detectors Display-update rates: Lxy broadband bars and spectra every 0.2 s; all other spectra and numbers every 1 s. 4.10.1 Exponential Averaging Exponential averaging times: Fast (250 ms), Slow (2000 ms), Impulse (70 ms + 1500 ms hold time constant) BE171211.book Page 44 Thursday, May 27, 2004 1:01 PM 44 Hand-held Analyzer Type 2250 – Instruction Manual Response to tone bursts for exponential averaging detectors according to IEC 60651 and DIN 45657: Table 4.9 Response to tone bursts for exponential averaging detectors Time Weighting F S I Duration of test tone burst (ms) Maximum response to test tone burst referred to response to continuous signal (dB) Continuous 0 200 Standard tolerances on maximum response (dB) Type 2250 tolerances on maximum response (dB) –0.98 ±1 ±0.1 100 –2.59 ±2 ±0.1 50 –4.82 ±2 ±0.1 20 –8.30 ±2 ±0.1 10 –11.14 ±2 ±0.1 5 –14.07 ±2 ±0.1 2 –17.99 ±2 ±0.1 1 –20.99 ±2 ±0.1 0.5 –23.99 ±2 ±0.1 0.25 –26.99 ±2 ±0.1 2000 –0.63 – ±0.1 500 –4.05 ±1 ±0.1 200 –7.42 – ±0.1 50 –13.12 – ±0.1 20 –3.61 ±1.5 ±0.1 5 –8.76 ±2 ±0.1 2 –12.55 ±2 ±0.1 Note: The maximum response to test tone burst referred to response to continuous signal is calculated from the formula in IEC 60651 appendix C. 4.10.2 Linear Averaging Linear averaging times: 1 second to 24 hours, in steps of 1 second Settling time according to IEC 60804: < 1 second Nominal delay time between operation of the reset facility and re-initiation of a measurement according to IEC 61672–1: < 2 seconds Time interval after completion of a measurement before a reading is displayed according to IEC 61672–1: < 1 s Minimum hold time according to IEC 60804: Results of a Timed Measurement are held until a new measurement is initiated or the result is reset. 4.10.3 Peak Peak onset time according to IEC 60651: < 100 µs BE171211.book Page 45 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 4.11 45 Spectrum Analysis Note: Spectrum analysis requires Frequency Analysis Software BZ 7223. Analytical filter design: Optimised Z-transformation of analogue Butterworth filters Base: 2 Sampling rate: Octave-based down-sampling from 48 kHz Reference attenuation: 0 dB 4.11.1 1/1- Octave band Centre Frequencies Nominal: 8 Hz1, 16 Hz, 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz2 Exact (5 digits): 7.8125 Hz, 15.625 Hz, 31.25 Hz, 62.5 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz Real-time frequency range: 8 Hz to 16 kHz centre frequencies. Fig.4.27 The shapes of the 1/1- Octave band filters (from 0 to –80 dB). The innermost and outermost curves show IEC 61260 tolerances Response (dB) 20 0 – 20 – 40 – 60 – 80 0.01 Fig.4.28 The shapes of the 1/1- Octave band filters (from 0 to –3.5 dB). The innermost and outermost curves show IEC 61260 tolerances Response (dB) 0.1 1 Multiple of Center Frequency 10 100 980474e 0.5 – 0.5 – 1.5 – 2.5 – 3.5 0.5 1 Multiple of Center Frequency 2.0 980472e 1 Only accessible when Extended Low Frequency set to On in the Setup menu. 2 These filters do not fulfil the requirements of paragraph 7.2.3 in the ANSI S1.11-1986 standard. The paragraph states, at which frequency the anti-alias filter cut-off should be set. For the realisation of the filters in Type 2250, this has no influence on the quality of the measurements. BE171211.book Page 46 Thursday, May 27, 2004 1:01 PM 46 Hand-held Analyzer Type 2250 – Instruction Manual 4.11.2 1/3-Octave band Cente Frequencies Nominal: 6.3 Hz1, 8.0 Hz1, 10 Hz1, 12.5 Hz, 16 Hz, 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.6 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz2, 20 kHz2 Exact (5 digits): 6.201 Hz, 7.8125 Hz, 9.8485 Hz, 12.401 Hz, 15.625 Hz, 19.697 Hz, 24.803 Hz, 31.25 Hz, 39.373 Hz, 49.616 Hz, 62.5 Hz, 78.745 Hz, 99.213 Hz, 125 Hz, 157.49 Hz, 198.43 Hz, 250 Hz, 314.98 Hz, 396.85 Hz, 500 Hz, 629.96 Hz, 793.70 Hz, 1 kHz, 1.2599 kHz, 1.5874 kHz, 2 kHz, 2.5198 kHz, 3.1748 kHz, 4 kHz, 5.0397 kHz, 6.3496 kHz, 8 kHz, 10.079 kHz, 12.699 kHz, 16 kHz, 20.159 kHz Real-time frequency range: 6.3 Hz to 20 kHz, centre frequencies. Fig.4.29 The shapes of the 1/3-octave band filters (from 0 to – 80 dB). The innermost and outermost curves show IEC 61260 tolerances Response (dB) 20 0 – 20 – 40 – 60 – 80 0.1 Fig.4.30 The shapes of the 1/3-octave band filters (from 0 to – 3.5 dB). The innermost and outermost curves show IEC 61260 tolerances Response (dB) 1 Multiple of Center Frequency 10 980473e 0.5 – 0.5 – 1.5 – 2.5 – 3.5 0.85 4.11.3 1 Multiple of Center Frequency 1.15 980471e Linear Operating Range Linear Operating Range according to the International Standard IEC 61260, for electrical input, for all filters in the filter banks: 1 Only accessible when Extended Low Frequency set to On in the Setup menu. 2 These filters do not fulfil the requirements of paragraph 7.2.3 in the ANSI S1.11-1986 standard. The paragraph states, at which frequency the anti-alias filter cut-off should be set. For the realisation of the filters in Type 2250, this has no influence on the quality of the measurements. BE171211.book Page 47 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications Table 4.10 Linear Operating Range Upper Limit (dB) 47 Lower Limit 1/1-Octave Lower Limit 1/3-Octave (dB) (dB) 140 25.9 22.1 Below the Lower Limit, the Level Linearity Error is less than or equal to the error found in Fig.2.1 with Linh set to the Lower Limit – 11.5 dB. 4.11.4 Measurement Range Measurement Range according to the International Standard IEC 61260 is the difference between the Upper Limit of the Linear Operating Range on the least sensitive level range and the Lower Limit of the Linear Operating Range on the most sensitive level range. On Type 2250, the Measurement Range equals the Linear Operating Range, because the instrument only has one range. 4.11.5 Octave Band Time Constants At low centre frequencies, the B*T product for Fast time-weighting becomes too small to give statistically reliable measurements. To overcome this, the Fast time constant (125 ms) and the Slow time constant (1000 ms) are replaced by progressively longer time constants with decreasing centre frequencies (and corresponding bandwidths). Table 4.11 shows the Fast time constants for the full range of octave bands. Table 4.11 Octave band Fast Time Constants 1/1-Octave Centre Frequency (Hz) 1/3-Octave Centre Frequency (Hz) Time Constant (ms) Averaging Time (ms) ≥ 63 ≥100 125 (Fast) 250 (Fast) 31.5 80, 63, 50 250 500 16 40, 31.5, 25 500 1000 8 20, 16, 12.5 1000 2000 – 10, 8, 6.3 2000 4000 Table 4.12 shows the Slow time constants for the full range of octave bands: Table 4.12 Octave band Slow Time Constants 1/1-Octave Centre Frequency (Hz) 1/3-Octave Centre Frequency (Hz) Time Constant (ms) Averaging Time (ms) ≥8 ≥12.5 1000 (Slow) 2000 (Slow) – 10, 8, 6.3 2000 4000 For a white Gaussian signal and for 1/1-octave centre frequencies from 8 Hz to 63 Hz, these time constants give a maximum relative standard deviation of approximately 1.5 dB. For 1/3-octave centre frequencies from 6.3 Hz to 160 Hz, these time constants give a maximum relative standard deviation of approximately 2 dB. 4.12 Influence from the Operating Environment The temperature and humidity specifications are given provided that no condensation inside the instrumentation results from the combination. Excessive condensation may cause permanent damage to the instrumentation. BE171211.book Page 48 Thursday, May 27, 2004 1:01 PM 48 Hand-held Analyzer Type 2250 – Instruction Manual 4.12.1 Environmental Stabilisation Time Typical stabilisation time after change in environmental conditions is 1 minute. When the instruments are moved from a warm environment with high humidity, to a colder environment, care should be taken not to produce condensation inside the instruments. In this case, much longer stabilisation periods may be necessary. 4.12.2 Temperature Operating temperature range: –10 to +50ºC (+14 to +122ºF) Storage temperature range: 4.12.3 –25 to +70ºC (–13 to +158ºF) Humidity Operating humidity range: 0% < RH < 90%, providing there is no condensation. 4.12.4 Vibration Vibration sensitivity (< 1000 Hz), measured with Z-weighting: Typically 62.5 dB for 1 ms–2, max 65 dB for 1 ms–2. 4.12.5 Magnetic Fields Max. sensitivity to power line (50/60 Hz) magnetic field strength of 80 A/m: Table 4.13 Magnetic Fields Max. Sensitivity Configuration Most Sensitive Direction E - field Type 2250 alone H - field Type 4189 and Type ZC 0032 alone 4.12.6 A-weighted (dB) C-weighted (dB) Z-weighted (dB) Not detectable < 19 < 20 Not detectable < 26 < 27 040141 Direction of magnetic field Immunity to Power and Radio-frequency Fields Conforms to IEC 60651, IEC 60804 and IEC 61672–1 down to 50 dB. Fig.4.31 The most sensitive direction 040140 BE171211.book Page 49 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 4.13 Electrical Input to Connector Panel of Type 2250 4.13.1 Input Socket (Rear Socket) 49 Triaxial Lemo socket used for Direct input as well as CCLD input. Direct Input: Max. input level: ±14.14 VPeak, no damage for signals up to ±20 VPeak Input impedance: > 1 MΩ CCLD Input: Max. input level: ±7.07 VPeak (no indication for violation of this level), no damage for signals in the range –10 to +25 V CCLD current: 4 mA @ 25°C 4.13.2 Trigger Socket Triaxial Lemo socket: Input Range: ±20 VPeak, no damage for signals up to ±50 VPeak Supply for Remote Control Switch: 5 V through Silicium diode and 5 k resistor Input impedance: > 1 MΩ 4.14 Electrical Output from Type 2250 4.14.1 Output Socket Triaxial Lemo socket: Output Signal: Input conditioned; A-, C-, or Z-weighted; covers the nominal range 20 to 140 dB Gain Adjustment: –80 to +60 dB Max. peak output level: ±4.46 V Output impedance: 50 Ω Min. load impedance: 15 kΩ ⎟⎟ 1 nF for < 0.2 dB attenuation from DC to 20 kHz, short-circuit proof without affecting the measurement results Max DC offset: ±15 mV 4.14.2 Headphones Socket Stereo MiniJack socket: Output Signal: Input signal can be monitored using this socket with headphones/earphones Gain Adjustment: – 80 to +60 dB Max. peak output voltage: ±1.4 V Output impedance: 2.2 Ω in each channel, short-circuit proof without affecting the measurement results BE171211.book Page 50 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 50 4.15 4.15.1 Power Supply External Power to Instrument Supply Voltage: 8 – 24 V DC, ripple voltage < 20 mV Current requirement: min. 1.5 amp. Power consumption: < 2.5 Watt Connector (at cable): Lemo type FFA.00, positive at center pin. 4.15.2 External AC Main Supply Adapter Part No.: ZG 0426 Supply Voltage: 100 – 120/200 – 240 VAC; 47 – 63 Hz Connector: 2–pin IEC 320 4.15.3 External AC Main Charger (Optional Accessory) Part No.: ZG 0444 Supply Voltage: 90 – 264 VAC; 47 – 63 Hz Connector: 2–pin IEC 320 4.15.4 Battery for Type 2250 Part No.: QB 0061 Rechargeable Li-Ion battery Voltage: 3.7 V Capacity: 4800 mAh 4.15.5 Battery Lifetime Typically: > 8 hours. However, if the instrument is used in low temperatures or there is extensive use of the display backlight, this may reduce the time. Battery Indicator: Remaining battery capacity may be read out in % or in time. Battery Fuel Gauge: The battery is equipped with a built-in fuel gauge, which continuously measures and stores the actual battery capacity. Charge time: In instrument, 7 hours from empty. With external charger ZG 0444 (optional accessory), 5 hours. Note: It is not recommended to charge the battery at temperatures below 0ºC or over 50ºC (32ºF to 122ºF). Doing this will reduce the battery lifetime. 4.16 Warm-up Time Warm-up time: < 1 minute after reaching equilibrium with the ambient environment and switching on power. 4.17 Real-time Clock Nominal drift: < 12 seconds over a 24-hour period BE171211.book Page 51 Thursday, May 27, 2004 1:01 PM CHAPTER 4 Specifications 4.18 CE-mark and C-Tick mark Compliance CE-mark indicates compliance with the EMC Directive and Low Voltage Directive. C-Tick mark indicates compliance with the EMC requirements of Australia and New Zealand Safety EN/IEC 61010–1: Safety requirements for electrical equipment for measurement, control and labroratory use. UL 3111–1: Standard for Safety - Electrical measuring and test equipment EMC Emission EN/IEC 61000–6–3: Generic emission standard for residential, commercial and light industrial environments. CISPR 22: Radio disturbance characteristics of information technology equipment. Class B limits. FCC Rules: Part 15: Complies with the limits for a Class B digital device. IEC 60651, IEC 60804, IEC 61260 and IEC 61672–1: Instrumentation standards EMC Immunity EN/IEC 61000–6–2: Generic standard – Immunity for industrial environment. EN/IEC 61326: Electrical equipment for measurement, control and laboratory use – EMC requirements. IEC 60651, IEC 60804, IEC 61260 and IEC 61672–1: Instrumentation standards 51 BE171211.book Page 52 Thursday, May 27, 2004 1:01 PM 52 Hand-held Analyzer Type 2250 – Instruction Manual BE171211.book Page 53 Thursday, May 27, 2004 1:01 PM 53 Appendix A Tables A.1 Electrical Frequency Responses Table A.1 Electrical frequency response with the Microphone Type parameter set to ‘Unknown’ (in the Transducers display) for the transducer used. Nominal Frequency (Hz) Exact Frequency (6 digits) (Hz) Electrical Response (2 decimals) (dB) Deviation from Ideal (2 decimals) (dB) Aweighting Cweighting Zweighting Aweighting Cweighting Zweighting 63 63.0957 –26.2 –0.82 0.00 0.00 0.00 0.00 80 79.4328 –22.51 –0.50 0.00 0.00 0.00 0.00 100 100 –19.14 –0.30 0.00 0.00 0.00 0.00 125 125.893 –16.1 –0.17 0.00 0.00 0.00 0.00 160 158.489 –13.35 –0.08 0.00 0.00 0.00 0.00 200 199.526 –10.87 –0.03 0.00 0.00 0.00 0.00 250 251.189 –8.63 0.00 0.00 0.00 0.00 0.00 315 316.228 –6.61 –0.02 0.00 0.00 0.00 0.00 400 398.107 –4.81 –0.03 0.00 0.00 0.00 0.00 500 501.187 –3.23 –0.03 0.00 0.00 0.00 0.00 630 630.957 –1.9 –0.03 0.00 0.00 0.00 0.00 800 794.328 –0.82 –0.02 0.00 0.00 0.00 0.00 1000 1000 0 0 0 0 0 0 1060 1059.25 0.17 –0.01 0.00 0.00 0.00 0.00 1120 1122.02 0.32 –0.01 0.00 0.00 0.00 0.00 1180 1188.50 0.46 –0.02 0.00 0.00 0.00 0.00 1250 1258.93 0.59 –0.03 0.00 0.00 0.00 0.00 1320 1333.52 0.71 –0.04 0.00 0.00 0.00 0.00 1400 1412.54 0.81 –0.06 0.00 0.00 0.00 0.00 1500 1496.24 0.9 –0.07 0.00 0.00 0.00 0.00 BE171211.book Page 54 Thursday, May 27, 2004 1:01 PM 54 Hand-held Analyzer Type 2250 – Instruction Manual Table A.1 (cont.) Electrical frequency response with the Microphone Type parameter set to ‘Unknown’ (in the Transducers display) for the transducer used. Nominal Frequency (Hz) Exact Frequency (6 digits) (Hz) Electrical Response (2 decimals) (dB) Deviation from Ideal (2 decimals) (dB) Aweighting Cweighting Zweighting Aweighting Cweighting Zweighting 1600 1584.89 0.98 –0.09 0.00 0.00 0.00 0.00 1700 1678.80 1.05 –0.10 0.00 0.00 0.00 0.00 1800 1778.28 1.11 –0.12 0.00 0.00 0.00 0.00 1900 1883.65 1.16 –0.14 0.00 0.00 0.00 0.00 2000 1995.26 1.20 –0.17 0.00 0.00 0.00 0.00 2120 2113.49 1.23 –0.20 0.00 0.00 0.00 0.00 2240 2238.72 1.25 –0.23 0.00 0.00 0.00 0.00 2360 2371.37 1.26 –0.26 0.00 0.00 0.00 0.00 2500 2511.89 1.27 –0.30 0.00 0.00 0.00 0.00 2650 2660.73 1.26 –0.34 0.00 0.00 0.00 0.00 2800 2818.38 1.25 –0.39 0.00 0.00 0.00 0.00 3000 2985.38 1.23 –0.45 0.00 0.00 0.00 0.00 3150 3162.28 1.20 –0.51 0.00 0.00 0.00 0.00 3350 3349.65 1.16 –0.57 0.00 0.00 0.00 0.00 3550 3548.13 1.10 –0.65 0.00 0.00 0.00 0.00 3750 3758.37 1.04 –0.73 0.00 0.00 0.00 0.00 4000 3981.07 0.97 –0.82 0.00 0.00 0.00 0.00 4250 4216.97 0.88 –0.92 0.00 0.00 0.00 0.00 4500 4466.84 0.79 –1.03 0.00 0.00 0.00 0.00 4750 4731.51 0.67 –1.16 0.00 0.00 0.00 0.00 5000 5011.87 0.55 –1.29 0.00 0.00 0.00 0.00 5300 5308.84 0.41 –1.44 0.00 0.00 0.00 0.00 5600 5623.41 0.25 –1.61 0.00 0.00 0.00 0.00 6000 5956.62 0.08 –1.79 0.00 0.00 0.00 0.00 6300 6309.57 –0.12 –1.99 0.00 0.00 0.00 0.00 6700 6683.44 –0.33 –2.21 0.00 0.01 0.01 0.00 7100 7079.46 –0.56 –2.45 0.00 0.01 0.01 0.00 7500 7498.94 –0.82 –2.71 0.00 0.01 0.01 0.00 8000 7943.28 –1.10 –3.00 0.00 0.01 0.01 0.00 8500 8413.95 –1.40 –3.30 0.00 0.01 0.01 0.00 9000 8912.51 –1.73 –3.64 0.00 0.01 0.01 0.00 BE171211.book Page 55 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 55 Table A.1 (cont.) Electrical frequency response with the Microphone Type parameter set to ‘Unknown’ (in the Transducers display) for the transducer used. Nominal Frequency (Hz) Exact Frequency (6 digits) (Hz) Electrical Response (2 decimals) (dB) Deviation from Ideal (2 decimals) (dB) Aweighting Cweighting Zweighting Aweighting Cweighting Zweighting 9500 9440.61 –2.09 –4.00 0.00 0.01 0.01 0.00 10000 10000 –2.47 –4.39 0.00 0.01 0.01 0.00 10600 10592.5 –2.89 –4.80 0.00 0.01 0.01 0.00 11200 11220.2 –3.33 –5.25 –0.01 0.00 0.00 –0.01 11800 11885.0 –3.81 –5.73 –0.01 0.00 0.00 –0.01 12500 12589.3 –4.32 –6.24 –0.01 –0.01 –0.01 –0.01 13200 13335.2 –4.86 –6.78 –0.01 –0.03 –0.02 –0.01 14000 14125.4 –5.43 –7.35 –0.01 –0.04 –0.04 –0.01 15000 14962.4 –6.03 –7.96 –0.01 –0.06 –0.06 –0.01 16000 15848.9 –6.66 –8.58 –0.01 –0.07 –0.07 –0.01 17000 16788.0 –7.31 –9.23 –0.02 –0.08 –0.08 –0.02 18000 17782.8 –7.96 –9.89 –0.02 –0.08 –0.07 –0.02 19000 18836.5 –8.61 –10.54 –0.02 –0.04 –0.04 –0.02 20000 19952.6 –9.23 –11.16 –0.02 0.06 0.06 –0.02 21200 21134.9 –9.76 –11.69 –0.03 0.26 0.26 –0.03 22400 22387.2 –10.16 –12.09 –0.13 0.52 0.53 –0.13 A.2 Free-field Frequency Responses Frequency responses for plane progressive sinusoidal sound waves incident from the reference direction with Z-frequency-weighting: Table A.2 Free-field frequency response of Microphone Type 4189 only, with sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘None’. Nominal Frequency Exact (6 digits) Micr. Actuator Frequency Response dB Micr. FF Correction dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.05 0.05 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.05 0.05 0.05 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 –0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.05 0.05 0.06 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.02 –0.03 –0.04 0.01 0.02 0.04 0.00 0.00 0.00 –0.01 0.00 0.00 0.06 0.07 0.07 BE171211.book Page 56 Thursday, May 27, 2004 1:01 PM 56 Hand-held Analyzer Type 2250 – Instruction Manual Nominal Frequency Hz Exact (6 digits) Micr. Actuator Frequency Response Hz dB Micr. FF Correction dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz –0.06 –0.09 –0.10 –0.11 0.07 0.10 0.11 0.12 0.00 0.01 0.01 0.01 0.01 0.02 0.02 0.02 0.07 0.07 0.07 0.07 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz –0.12 –0.13 –0.15 –0.16 0.14 0.15 0.17 0.18 0.01 0.01 0.01 0.01 0.03 0.03 0.03 0.03 0.08 0.08 0.08 0.08 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz –0.18 –0.20 –0.22 –0.25 0.20 0.22 0.24 0.27 0.01 0.01 0.02 0.02 0.03 0.03 0.04 0.04 0.08 0.08 0.08 0.09 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz –0.28 –0.31 –0.34 –0.38 0.29 0.32 0.36 0.39 0.02 0.02 0.03 0.03 0.04 0.04 0.05 0.04 0.09 0.09 0.09 0.09 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz –0.42 –0.47 –0.53 –0.59 0.43 0.48 0.53 0.59 0.03 0.03 0.04 0.04 0.04 0.03 0.04 0.04 0.10 0.10 0.10 0.11 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.65 –0.73 –0.81 –0.90 0.65 0.71 0.78 0.86 0.05 0.05 0.06 0.06 0.04 0.04 0.04 0.03 0.11 0.12 0.12 0.13 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.99 –1.10 –1.22 –1.35 0.96 1.07 1.18 1.30 0.07 0.07 0.08 0.09 0.04 0.03 0.03 0.03 0.13 0.14 0.14 0.14 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz –1.50 –1.65 –1.83 –2.02 1.43 1.57 1.73 1.90 0.10 0.10 0.11 0.11 0.03 0.02 0.01 0.00 0.14 0.15 0.15 0.15 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –2.22 –2.43 –2.67 –2.92 2.09 2.28 2.49 2.74 0.12 0.12 0.12 0.12 –0.01 –0.03 –0.06 –0.07 0.16 0.16 0.17 0.17 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –3.20 –3.50 –3.84 –4.22 3.04 3.38 3.75 4.14 0.12 0.11 0.09 0.06 –0.04 –0.01 –0.01 –0.02 0.17 0.18 0.19 0.20 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz –4.65 –5.10 –5.57 –6.01 4.60 5.12 5.68 6.27 0.02 –0.03 –0.10 –0.19 –0.03 –0.01 0.01 0.07 0.22 0.23 0.24 0.26 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz –6.39 –6.69 –6.93 –7.15 6.81 7.19 7.54 7.89 –0.31 –0.44 –0.59 –0.75 0.10 0.06 0.02 –0.01 0.28 0.29 0.31 0.33 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz –7.40 –7.68 –8.02 –8.50 8.24 8.59 8.91 9.27 –0.87 –0.94 –0.90 –0.71 –0.03 –0.03 0.00 0.05 0.35 0.38 0.40 0.43 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz –9.21 –10.09 –11.10 –12.31 9.62 10.05 10.46 10.85 –0.40 –0.03 0.34 0.59 0.02 –0.07 –0.31 –0.87 0.45 0.48 0.49 0.49 BE171211.book Page 57 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 57 Table A.3 Free-field frequency response of Hand-held Analyzer Type 2250 (including Microphone Type 4189) and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘None’. Nominal Frequency Exact Frequency Acoustical Response From Table A.2 dB Expanded Uncertainty Body Influence Expanded Uncertainty Acoustical Response Expanded Uncertainty dB dB dB dB dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.05 0.05 0.00 0.00 0.10 0.10 0.00 0.00 0.11 0.11 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.05 0.05 0.05 0.00 0.00 0.01 0.10 0.10 0.10 0.00 0.00 0.01 0.11 0.11 0.11 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 0.00 0.05 0.05 0.06 0.03 0.06 0.13 0.10 0.10 0.10 0.04 0.08 0.13 0.11 0.11 0.12 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.01 0.00 0.00 0.06 0.07 0.07 0.21 0.22 0.07 0.10 0.10 0.10 0.22 0.20 0.01 0.12 0.12 0.12 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz 0.01 0.02 0.02 0.02 0.07 0.07 0.07 0.07 –0.11 –0.07 –0.10 –0.18 0.10 0.10 0.10 0.10 –0.10 –0.05 –0.09 –0.16 0.12 0.12 0.12 0.12 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz 0.03 0.03 0.03 0.03 0.08 0.08 0.08 0.08 –0.26 –0.30 –0.24 –0.08 0.10 0.10 0.10 0.10 –0.24 –0.28 –0.20 –0.03 0.13 0.13 0.13 0.13 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz 0.03 0.03 0.04 0.04 0.08 0.08 0.08 0.09 0.09 0.17 0.07 –0.12 0.10 0.10 0.10 0.10 0.13 0.19 0.09 –0.09 0.13 0.13 0.13 0.13 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz 0.04 0.04 0.04 0.04 0.09 0.09 0.09 0.09 –0.21 –0.09 0.11 0.09 0.10 0.10 0.10 0.15 –0.18 –0.05 0.17 0.13 0.13 0.13 0.13 0.13 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz 0.04 0.03 0.04 0.04 0.10 0.10 0.10 0.11 –0.30 –0.17 0.18 0.09 0.15 0.15 0.15 0.15 –0.27 –0.10 0.23 0.11 0.18 0.18 0.18 0.19 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz 0.04 0.04 0.04 0.03 0.11 0.12 0.12 0.13 –0.12 0.16 0.03 –0.13 0.15 0.15 0.15 0.15 –0.08 0.20 0.06 –0.09 0.19 0.19 0.19 0.19 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz 0.04 0.03 0.03 0.03 0.13 0.14 0.14 0.14 0.20 –0.09 –0.01 0.10 0.15 0.15 0.15 0.15 0.24 –0.07 0.05 0.13 0.20 0.20 0.21 0.21 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz 0.03 0.02 0.01 0.00 0.14 0.15 0.15 0.15 –0.16 –0.24 –0.10 –0.05 0.15 0.15 0.15 0.15 –0.13 –0.23 –0.07 –0.05 0.21 0.21 0.21 0.21 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –0.01 –0.03 –0.06 –0.07 0.16 0.16 0.17 0.17 0.03 0.06 0.05 –0.03 0.15 0.15 0.15 0.15 0.02 0.03 0.00 –0.10 0.21 0.22 0.22 0.23 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –0.04 –0.01 –0.01 –0.02 0.17 0.18 0.19 0.20 –0.08 –0.08 –0.19 –0.01 0.20 0.20 0.20 0.20 –0.13 –0.10 –0.19 –0.02 0.23 0.26 0.27 0.28 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz –0.03 –0.01 0.01 0.07 0.22 0.23 0.24 0.26 0.11 0.15 –0.14 –0.13 0.20 0.20 0.20 0.20 0.08 0.14 –0.12 –0.05 0.28 0.30 0.30 0.33 BE171211.book Page 58 Thursday, May 27, 2004 1:01 PM 58 Hand-held Analyzer Type 2250 – Instruction Manual Nominal Frequency Exact Frequency Acoustical Response From Table A.2 dB Expanded Uncertainty Body Influence Expanded Uncertainty Acoustical Response Expanded Uncertainty dB dB dB dB dB 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 0.10 0.06 0.02 –0.01 0.28 0.29 0.31 0.33 0.08 0.15 0.00 –0.07 0.20 0.20 0.20 0.20 0.18 0.21 0.02 –0.08 0.34 0.35 0.37 0.39 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz –0.03 –0.03 0.00 0.05 0.35 0.38 0.40 0.43 0.05 0.11 –0.01 –0.06 0.20 0.20 0.20 0.20 0.02 0.08 –0.02 –0.01 0.39 0.40 0.43 0.45 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz 0.02 –0.07 –0.31 –0.80 0.45 0.48 0.49 0.49 0.12 0.00 0.04 0.17 0.20 0.20 0.20 0.20 0.14 –0.07 –0.27 –0.63 0.47 0.49 0.52 0.53 Table A.4 Free-field frequency response of Microphone Type 4189 only, with Windscreen UA 1650 fitted and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’. Nominal Frequency Exact Frequency Microphone Free-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.05 0.05 0.01 0.02 0.15 0.15 0.00 0.00 0.01 0.02 0.16 0.16 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.05 0.05 0.05 0.02 0.02 0.03 0.15 0.15 0.15 0.00 0.00 0.00 0.02 0.02 0.03 0.16 0.16 0.16 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 0.00 0.05 0.05 0.06 0.04 0.05 0.06 0.15 0.15 0.15 –0.01 –0.01 –0.02 0.04 0.04 0.03 0.16 0.16 0.16 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.01 0.00 0.00 0.06 0.07 0.07 0.08 0.09 0.12 0.15 0.15 0.15 –0.04 –0.06 –0.09 0.03 0.03 0.03 0.16 0.17 0.17 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz 0.01 0.01 0.01 0.01 0.07 0.07 0.07 0.07 0.16 0.20 0.22 0.24 0.15 0.15 0.15 0.15 –0.15 –0.23 –0.25 –0.28 0.02 –0.02 –0.02 –0.03 0.17 0.17 0.17 0.17 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz 0.02 0.02 0.02 0.02 0.08 0.08 0.08 0.08 0.27 0.31 0.36 0.39 0.15 0.15 0.15 0.15 –0.32 –0.35 –0.39 –0.43 –0.04 –0.02 –0.01 –0.02 0.17 0.17 0.17 0.17 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz 0.02 0.02 0.02 0.02 0.08 0.08 0.08 0.09 0.41 0.42 0.46 0.49 0.15 0.15 0.15 0.15 –0.47 –0.52 –0.56 –0.60 –0.04 –0.08 –0.08 –0.09 0.17 0.17 0.17 0.17 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz 0.02 0.02 0.02 0.01 0.09 0.09 0.09 0.09 0.55 0.60 0.63 0.64 0.15 0.15 0.15 0.15 –0.65 –0.68 –0.71 –0.73 –0.08 –0.06 –0.07 –0.08 0.17 0.17 0.17 0.17 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz 0.01 0.00 0.00 0.00 0.10 0.10 0.10 0.11 0.66 0.70 0.67 0.63 0.15 0.15 0.15 0.00 –0.73 –0.72 –0.69 –0.64 –0.06 –0.02 –0.02 –0.01 0.18 0.18 0.18 0.11 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.01 –0.01 –0.02 –0.03 0.11 0.12 0.12 0.13 0.57 0.50 0.38 0.28 0.15 0.15 0.15 0.15 –0.57 –0.49 –0.40 –0.31 0.00 0.00 –0.04 –0.06 0.19 0.19 0.19 0.20 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.03 –0.04 –0.05 –0.06 0.13 0.14 0.14 0.14 0.19 0.06 0.09 0.07 0.15 0.15 0.15 0.15 –0.21 –0.11 –0.02 0.07 –0.05 –0.09 0.03 0.08 0.20 0.21 0.21 0.21 BE171211.book Page 59 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Nominal Frequency Exact Frequency 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz 6000 Hz 6300 Hz 6700 Hz 7100 Hz Microphone Free-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB –0.07 –0.08 –0.10 –0.11 0.14 0.15 0.15 0.15 0.15 0.27 0.41 0.39 0.15 0.15 0.25 0.25 0.14 0.21 0.27 0.33 0.22 0.40 0.58 0.60 0.21 0.21 0.29 0.29 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –0.13 –0.15 –0.18 –0.19 0.16 0.16 0.17 0.17 0.31 0.14 –0.09 –0.34 0.25 0.25 0.25 0.25 0.37 0.41 0.44 0.47 0.55 0.40 0.18 –0.06 0.30 0.30 0.30 0.30 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –0.16 –0.12 –0.10 –0.08 0.17 0.18 0.19 0.20 –0.42 –0.21 0.14 0.17 0.25 0.25 0.25 0.25 0.48 0.50 0.51 0.51 –0.11 0.17 0.55 0.60 0.30 0.31 0.31 0.32 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.18 Hz –0.05 0.02 0.11 0.26 0.22 0.23 0.24 0.26 –0.17 –0.56 –0.65 –0.58 0.25 0.25 0.25 0.25 0.51 0.50 0.50 0.49 0.30 –0.05 –0.04 0.18 0.33 0.34 0.35 0.36 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.02 Hz 12589.25 Hz 13335.21 Hz 14125.38 Hz 0.41 0.50 0.61 0.74 0.28 0.29 0.31 0.33 –0.46 –0.48 –0.70 –0.83 0.25 0.25 0.25 0.25 0.47 0.46 0.44 0.42 0.43 0.48 0.34 0.33 0.38 0.38 0.40 0.41 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.36 Hz 15848.93 Hz 16788.04 Hz 17782.79 Hz 0.84 0.91 0.90 0.76 0.35 0.38 0.40 0.43 –0.77 –0.76 –0.75 –0.76 0.25 0.25 0.25 0.25 0.40 0.38 0.35 0.33 0.47 0.53 0.50 0.33 0.43 0.45 0.47 0.50 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.49 Hz 19952.62 Hz 21134.89 Hz 22387.21 Hz 0.42 –0.04 –0.65 –1.46 0.45 0.48 0.49 0.49 –0.87 –0.70 –0.60 –0.79 0.25 0.25 0.25 0.25 0.30 0.27 0.24 0.19 –0.15 –0.47 –1.01 –2.06 0.51 0.54 0.55 0.55 59 Table A.5 Free-field frequency response of Hand-held Analyzer Type 2250 (including Microphone Type 4189), Windscreen UA 1650 fitted and sound field at 0° angle of incidence to the microphone. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’. Nominal Frequency Exact Frequency Acoustical Response From Table A.4 dB Expanded Uncertainty 2250 Body Influence Expanded Uncertainty Acoustical Response Expanded Uncertainty dB dB dB dB dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.01 0.02 0.16 0.16 0.00 0.00 0.10 0.10 0.01 0.02 0.19 0.19 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.02 0.02 0.03 0.16 0.16 0.16 0.00 0.00 0.01 0.10 0.10 0.10 0.01 0.03 0.03 0.19 0.19 0.19 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.04 0.04 0.03 0.16 0.16 0.16 0.03 0.06 0.13 0.10 0.10 0.10 0.06 0.10 0.16 0.19 0.19 0.19 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz 0.03 0.03 0.03 0.16 0.17 0.17 0.21 0.22 0.07 0.10 0.10 0.10 0.24 0.25 0.10 0.19 0.19 0.19 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz 0.02 –0.02 –0.02 –0.03 0.17 0.17 0.17 0.17 –0.11 –0.07 –0.10 –0.18 0.10 0.10 0.10 0.10 –0.09 –0.09 –0.12 –0.20 0.19 0.19 0.19 0.19 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz –0.04 –0.02 –0.01 –0.02 0.17 0.17 0.17 0.17 –0.26 –0.30 –0.24 –0.08 0.10 0.10 0.10 0.10 –0.30 –0.32 –0.25 –0.10 0.20 0.20 0.20 0.20 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz –0.04 –0.08 –0.08 –0.09 0.17 0.17 0.17 0.17 0.09 0.17 0.07 –0.12 0.10 0.10 0.10 0.10 0.05 0.09 –0.01 –0.21 0.20 0.20 0.20 0.20 BE171211.book Page 60 Thursday, May 27, 2004 1:01 PM 60 Hand-held Analyzer Type 2250 – Instruction Manual Nominal Frequency Exact Frequency Acoustical Response From Table A.4 dB Expanded Uncertainty 2250 Body Influence Expanded Uncertainty Acoustical Response Expanded Uncertainty dB dB dB dB dB 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz –0.08 –0.06 –0.07 –0.08 0.17 0.17 0.17 0.17 –0.21 –0.09 0.11 0.09 0.10 0.10 0.10 0.15 –0.29 –0.15 0.05 0.01 0.20 0.20 0.20 0.23 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz –0.06 –0.02 –0.02 –0.01 0.18 0.18 0.18 0.11 –0.30 –0.17 0.18 0.09 0.15 0.15 0.15 0.15 –0.36 –0.19 0.17 0.08 0.23 0.23 0.23 0.19 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz 0.00 0.00 –0.04 –0.06 0.19 0.19 0.19 0.20 –0.12 0.16 0.03 –0.13 0.15 0.15 0.15 0.15 –0.13 0.16 –0.01 –0.19 0.24 0.24 0.24 0.25 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.05 –0.09 0.03 0.08 0.20 0.21 0.21 0.21 0.20 –0.09 –0.01 0.10 0.15 0.15 0.15 0.15 0.14 –0.18 0.02 0.18 0.25 0.25 0.25 0.25 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz 0.22 0.40 0.58 0.60 0.21 0.21 0.29 0.29 –0.16 –0.24 –0.10 –0.05 0.15 0.15 0.15 0.15 0.06 0.16 0.49 0.55 0.25 0.26 0.33 0.33 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz 0.55 0.40 0.18 –0.06 0.30 0.30 0.30 0.30 0.03 0.06 0.05 –0.03 0.15 0.15 0.15 0.15 0.58 0.46 0.23 –0.09 0.33 0.33 0.34 0.34 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –0.11 0.17 0.55 0.60 0.30 0.31 0.31 0.32 –0.08 –0.08 –0.19 –0.01 0.20 0.20 0.20 0.20 –0.19 0.09 0.36 0.59 0.36 0.37 0.37 0.38 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 0.30 –0.05 –0.04 0.18 0.33 0.34 0.35 0.36 0.11 0.15 –0.14 –0.13 0.20 0.20 0.20 0.20 0.40 0.10 –0.18 0.05 0.39 0.39 0.40 0.41 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 0.43 0.48 0.34 0.33 0.38 0.38 0.40 0.41 0.08 0.15 0.00 –0.07 0.20 0.20 0.20 0.20 0.51 0.63 0.34 0.26 0.43 0.43 0.45 0.46 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 0.47 0.53 0.50 0.33 0.43 0.45 0.47 0.50 0.05 0.11 –0.01 –0.06 0.20 0.20 0.20 0.20 0.52 0.64 0.49 0.27 0.47 0.50 0.51 0.54 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz –0.15 –0.47 –1.01 –2.06 0.51 0.54 0.55 0.55 0.12 0.00 0.04 0.17 0.20 0.20 0.20 0.20 –0.03 –0.48 –0.97 –1.89 0.55 0.58 0.59 0.59 Table A.6 Free-field frequency response of Microphone Type 4189, with sound field at 0° angle of incidence to the microphone and Outdoor Microphone Kit UA 1404 fitted. Sound Field Correction parameter set to ‘Free-field’ and the Windscreen Correction parameter set to ‘UA 1404’. Nominal Frequency Exact Frequency Microphone Free-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.05 0.05 0.00 0.00 0.15 0.15 0.00 0.00 0.00 0.00 0.16 0.16 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.05 0.05 0.05 0.00 0.00 0.00 0.15 0.15 0.15 0.00 0.00 0.00 0.00 0.00 0.00 0.16 0.16 0.16 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 0.00 0.05 0.05 0.06 0.00 0.02 0.04 0.15 0.15 0.15 0.00 0.00 0.00 0.01 0.02 0.04 0.16 0.16 0.16 BE171211.book Page 61 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Nominal Frequency Exact Frequency Microphone Free-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.01 0.00 0.00 0.06 0.07 0.07 0.07 0.10 0.14 0.15 0.15 0.15 0.00 0.01 0.01 0.07 0.11 0.15 0.16 0.17 0.17 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz 0.01 0.01 0.01 0.01 0.07 0.07 0.07 0.07 0.18 0.19 0.15 0.11 0.15 0.15 0.15 0.15 0.01 0.02 0.02 0.02 0.20 0.22 0.19 0.15 0.17 0.17 0.17 0.17 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz 0.02 0.02 0.02 0.02 0.08 0.08 0.08 0.08 0.08 0.05 0.03 0.02 0.15 0.15 0.15 0.15 0.02 0.03 0.03 0.03 0.11 0.09 0.08 0.07 0.17 0.17 0.17 0.17 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz 0.02 0.02 0.02 0.02 0.08 0.08 0.08 0.09 0.03 0.05 0.07 0.11 0.15 0.15 0.15 0.15 0.04 0.04 0.05 0.05 0.09 0.10 0.14 0.18 0.17 0.17 0.17 0.17 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz 0.02 0.02 0.02 0.01 0.09 0.09 0.09 0.09 0.16 0.20 0.23 0.23 0.15 0.15 0.15 0.15 0.06 0.06 0.07 0.08 0.23 0.28 0.32 0.32 0.17 0.17 0.17 0.17 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz 0.01 0.00 0.00 0.00 0.10 0.10 0.10 0.11 0.22 0.19 0.10 –0.02 0.15 0.15 0.15 0.15 0.09 0.10 0.11 0.12 0.32 0.29 0.21 0.10 0.18 0.18 0.18 0.19 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.01 –0.01 –0.02 –0.03 0.11 0.12 0.12 0.13 –0.07 –0.08 –0.13 –0.04 0.15 0.15 0.15 0.15 0.13 0.14 0.16 0.17 0.06 0.04 0.01 0.09 0.19 0.19 0.19 0.20 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.03 –0.04 –0.05 –0.06 0.13 0.14 0.14 0.14 0.05 0.01 0.04 –0.02 0.15 0.15 0.15 0.15 0.19 0.20 0.22 0.23 0.21 0.18 0.21 0.15 0.20 0.21 0.21 0.21 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz –0.07 –0.08 –0.10 –0.11 0.14 0.15 0.15 0.15 –0.05 –0.17 –0.19 –0.35 0.15 0.15 0.15 0.15 0.25 0.26 0.27 0.28 0.13 0.01 –0.02 –0.18 0.21 0.21 0.21 0.21 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –0.13 –0.15 –0.18 –0.19 0.16 0.16 0.17 0.17 –0.37 –0.43 –0.35 –0.29 0.15 0.15 0.15 0.15 0.28 0.28 0.27 0.25 –0.22 –0.30 –0.25 –0.23 0.22 0.22 0.23 0.23 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –0.16 –0.12 –0.10 –0.08 0.17 0.18 0.19 0.20 –0.14 –0.05 –0.01 0.06 0.15 0.15 0.15 0.15 0.21 0.16 0.09 0.01 –0.09 –0.02 –0.01 –0.01 0.23 0.23 0.24 0.25 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz –0.05 0.02 0.11 0.26 0.22 0.23 0.24 0.26 0.15 0.16 0.14 0.06 0.15 0.15 0.15 0.15 –0.09 –0.18 –0.26 –0.29 0.01 0.00 0.00 0.04 0.27 0.27 0.28 0.30 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 0.41 0.50 0.61 0.74 0.28 0.29 0.31 0.33 –0.14 –0.50 –1.08 –1.78 0.15 0.15 0.15 0.15 –0.22 0.00 0.40 0.97 0.05 –0.01 –0.07 –0.07 0.32 0.33 0.34 0.36 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 0.84 0.91 0.90 0.76 0.35 0.38 0.40 0.43 –2.53 –3.36 –4.08 –4.57 0.15 0.15 0.15 0.15 1.68 2.47 3.25 3.99 –0.01 0.02 0.07 0.18 0.38 0.41 0.43 0.46 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz 0.42 –0.04 –0.65 –1.46 0.45 0.48 0.49 0.49 –5.05 –5.95 –6.46 –8.06 0.15 0.15 0.15 0.15 4.64 5.19 5.59 5.84 0.00 –0.81 –1.52 –3.68 0.47 0.50 0.51 0.51 61 BE171211.book Page 62 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 62 A.3 Diffuse-field Frequency Responses Diffuse-field frequency responses with Z-frequency-weighting: Table A.7 Diffuse-field frequency response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Sound Field Correction parameter set to ‘Diffuse-field’ and the Windscreen Correction parameter set to ‘None’. Nominal Frequency Exact Frequency Actuator Response dB Micr. FF Correction Micr. DF Correction Electrical Response Acoustical Response Expanded Uncertainty dB Reference Direction Response dB dB dB dB dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.05 0.05 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.05 0.05 0.05 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 –0.01 0.00 0.00 –0.01 0.00 0.00 0.01 0.00 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.00 0.05 0.05 0.06 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.02 –0.03 –0.04 –0.01 –0.01 –0.02 0.01 0.02 0.04 0.01 0.02 0.03 0.00 0.02 0.03 –0.02 –0.02 –0.03 0.06 0.07 0.07 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz –0.06 –0.09 –0.10 –0.11 –0.02 –0.02 –0.02 –0.02 0.07 0.10 0.11 0.12 0.05 0.08 0.09 0.10 0.06 0.09 0.10 0.11 –0.03 –0.03 –0.03 –0.03 0.07 0.07 0.07 0.07 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz –0.12 –0.13 –0.15 –0.16 –0.03 –0.03 –0.04 –0.05 0.14 0.15 0.17 0.18 0.11 0.12 0.14 0.15 0.13 0.14 0.16 0.17 –0.04 –0.05 –0.05 –0.06 0.08 0.08 0.08 0.08 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz –0.18 –0.20 –0.22 –0.25 –0.05 –0.05 –0.05 –0.04 0.20 0.22 0.24 0.27 0.17 0.19 0.21 0.24 0.19 0.21 0.23 0.26 –0.06 –0.07 –0.07 –0.05 0.08 0.08 0.08 0.09 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz –0.28 –0.31 –0.34 –0.38 –0.03 0.00 0.02 0.04 0.29 0.32 0.36 0.39 0.27 0.30 0.33 0.37 0.29 0.32 0.35 0.38 –0.03 –0.01 0.01 0.02 0.09 0.09 0.09 0.09 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz –0.42 –0.47 –0.53 –0.59 0.04 0.04 0.03 0.03 0.43 0.48 0.53 0.59 0.41 0.46 0.51 0.56 0.42 0.46 0.51 0.56 0.03 0.02 0.01 0.00 0.10 0.10 0.10 0.11 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.65 –0.73 –0.81 –0.90 0.03 0.04 0.05 0.07 0.65 0.71 0.78 0.86 0.63 0.69 0.77 0.85 0.62 0.68 0.75 0.82 0.01 0.00 0.01 0.02 0.11 0.12 0.12 0.13 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.99 –1.10 –1.22 –1.35 0.09 0.09 0.08 0.07 0.96 1.07 1.18 1.30 0.94 1.04 1.14 1.25 0.91 1.00 1.09 1.19 0.03 0.03 –0.01 –0.04 0.13 0.14 0.14 0.14 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz –1.50 –1.65 –1.83 –2.02 0.09 0.14 0.19 0.24 1.43 1.57 1.73 1.90 1.37 1.50 1.64 1.79 1.30 1.42 1.54 1.68 –0.04 –0.01 0.01 0.02 0.14 0.15 0.15 0.15 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –2.22 –2.43 –2.67 –2.92 0.28 0.32 0.39 0.47 2.09 2.28 2.49 2.74 1.94 2.10 2.27 2.44 1.81 1.95 2.09 2.25 0.00 –0.02 –0.01 –0.01 0.16 0.16 0.17 0.17 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –3.20 –3.50 –3.84 –4.22 0.63 0.75 0.87 1.03 3.04 3.38 3.75 4.14 2.62 2.81 2.99 3.18 2.46 2.69 2.89 3.10 0.04 0.06 0.02 –0.01 0.17 0.18 0.19 0.20 BE171211.book Page 63 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Nominal Frequency Exact Frequency Actuator Response Micr. FF Correction Micr. DF Correction Electrical Response Acoustical Response Expanded Uncertainty dB Reference Direction Response dB dB dB dB dB dB 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz –4.65 –5.10 –5.57 –6.01 1.23 1.53 1.86 2.20 4.60 5.12 5.68 6.27 3.36 3.54 3.72 3.89 3.31 3.56 3.83 4.15 –0.05 –0.03 0.01 0.08 0.22 0.23 0.24 0.26 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz –6.39 –6.69 –6.93 –7.15 2.44 2.51 2.54 2.59 6.81 7.19 7.54 7.89 4.05 4.21 4.38 4.56 4.46 4.71 4.99 5.30 0.10 0.02 –0.01 0.00 0.28 0.29 0.31 0.33 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz –7.40 –7.68 –8.02 –8.50 2.60 2.58 2.52 2.47 8.24 8.59 8.91 9.27 4.79 5.09 5.51 6.06 5.63 6.00 6.41 6.82 0.00 –0.01 0.02 0.03 0.35 0.38 0.40 0.43 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz –9.21 –10.09 –11.10 –12.31 2.47 2.48 2.48 2.42 9.62 10.05 10.46 10.85 6.74 7.47 8.13 8.59 7.16 7.43 7.48 7.13 0.00 –0.14 –0.50 –1.30 0.45 0.48 0.49 0.49 63 Table A.8 Diffuse-field frequency response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Windscreen UA 1650 fitted. Sound Field Correction parameter set to ‘Diffusefield’ and the Windscreen Correction parameter set to ‘Auto Detect’ or ‘UA 1650’. Nominal Frequency Exact Frequency Microphone Diffuse-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.05 0.05 0.01 0.02 0.05 0.05 0.00 0.00 0.01 0.02 0.07 0.07 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.05 0.05 0.05 0.02 0.02 0.01 0.05 0.05 0.05 0.00 0.00 0.00 0.02 0.02 0.00 0.07 0.07 0.07 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 –0.01 0.05 0.05 0.06 0.00 0.02 0.05 0.05 0.05 0.05 0.00 0.00 –0.01 0.01 0.02 0.03 0.07 0.07 0.08 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.03 –0.04 –0.06 0.06 0.07 0.07 0.07 0.09 0.08 0.05 0.05 0.05 –0.01 –0.02 –0.03 0.04 0.03 0.00 0.08 0.09 0.09 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz –0.08 –0.11 –0.12 –0.13 0.07 0.07 0.07 0.07 0.12 0.15 0.17 0.18 0.05 0.05 0.08 0.08 –0.04 –0.07 –0.08 –0.09 0.00 –0.03 –0.03 –0.05 0.09 0.09 0.11 0.11 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz –0.15 –0.17 –0.19 –0.21 0.08 0.08 0.08 0.08 0.19 0.22 0.25 0.27 0.08 0.08 0.10 0.10 –0.10 –0.12 –0.13 –0.15 –0.05 –0.06 –0.07 –0.09 0.11 0.11 0.13 0.13 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz –0.23 –0.26 –0.28 –0.29 0.08 0.08 0.08 0.09 0.29 0.30 0.33 0.34 0.10 0.12 0.15 0.15 –0.16 –0.18 –0.20 –0.22 –0.10 –0.13 –0.15 –0.17 0.13 0.14 0.17 0.17 1900 Hz 2000 Hz 2120 Hz 2240 Hz 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz –0.30 –0.31 –0.32 –0.35 0.09 0.09 0.09 0.09 0.39 0.42 0.46 0.48 0.15 0.15 0.15 0.15 –0.24 –0.26 –0.28 –0.29 –0.16 –0.15 –0.15 –0.15 0.17 0.17 0.17 0.17 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz –0.38 –0.44 –0.50 –0.56 0.10 0.10 0.10 0.11 0.49 0.53 0.54 0.53 0.15 0.15 0.15 0.15 –0.28 –0.26 –0.21 –0.12 –0.17 –0.17 –0.17 –0.15 0.18 0.18 0.18 0.19 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.62 –0.69 –0.76 –0.83 0.11 0.12 0.12 0.13 0.49 0.43 0.37 0.27 0.15 0.15 0.15 0.15 0.00 0.16 0.35 0.57 –0.14 –0.10 –0.04 0.01 0.19 0.19 0.19 0.20 BE171211.book Page 64 Thursday, May 27, 2004 1:01 PM 64 Hand-held Analyzer Type 2250 – Instruction Manual Nominal Frequency Exact Frequency 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz 4750 Hz 5000 Hz 5300 Hz 5600 Hz Microphone Diffuse-field dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB –0.91 –1.01 –1.15 –1.29 0.13 0.14 0.14 0.14 0.17 0.04 –0.07 –0.10 0.15 0.15 0.15 0.15 0.79 1.02 1.23 1.44 0.05 0.05 0.02 0.05 0.20 0.21 0.21 0.21 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz –1.41 –1.51 –1.63 –1.77 0.14 0.15 0.15 0.15 –0.18 –0.17 –0.14 –0.08 0.25 0.35 0.45 0.50 1.63 1.82 2.00 2.17 0.04 0.14 0.22 0.31 0.29 0.38 0.47 0.52 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –1.94 –2.12 –2.28 –2.45 0.16 0.16 0.17 0.17 –0.10 –0.06 –0.04 –0.29 0.50 0.50 0.50 0.50 2.35 2.53 2.72 2.91 0.31 0.35 0.40 0.17 0.52 0.52 0.53 0.53 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –2.58 –2.75 –2.97 –3.19 0.17 0.18 0.19 0.20 –0.40 –0.54 –0.44 –0.48 0.50 0.50 0.50 0.50 3.12 3.33 3.56 3.80 0.14 0.03 0.15 0.13 0.53 0.53 0.53 0.54 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.18 Hz –3.41 –3.57 –3.71 –3.81 0.22 0.23 0.24 0.26 –0.61 –0.73 –0.83 –1.20 0.50 0.50 0.80 0.80 4.05 4.32 4.60 4.89 0.03 0.01 0.06 –0.12 0.55 0.55 0.84 0.84 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.02 Hz 12589.25 Hz 13335.21 Hz 14125.38 Hz –3.95 –4.19 –4.39 –4.56 0.28 0.29 0.31 0.33 –1.18 –0.97 –1.26 –1.33 0.80 0.80 0.80 0.80 5.18 5.49 5.80 6.11 0.05 0.33 0.14 0.22 0.85 0.85 0.86 0.87 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.36 Hz 15848.93 Hz 16788.04 Hz 17782.79 Hz –4.79 –5.10 –5.49 –6.03 0.35 0.38 0.40 0.43 –1.70 –1.35 –1.33 –1.58 0.80 0.80 0.80 0.80 6.42 6.73 7.02 7.28 –0.08 0.28 0.19 –0.33 0.87 0.89 0.89 0.91 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.49 Hz 19952.62 Hz 21134.89 Hz 22387.21 Hz –6.74 –7.61 –8.63 –9.89 0.45 0.48 0.49 0.49 –1.85 –1.38 –1.46 –1.84 0.80 0.80 0.80 0.80 7.53 7.73 7.88 7.96 –1.06 –1.26 –2.21 –3.77 0.92 0.93 0.94 0.94 Table A.9 Diffuse-field frequency response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted. Sound Field Correction parameter set to ‘Diffuse-field’ and the Windscreen Correction parameter set to ‘UA 1404’. Nominal Frequency Exact Frequency Typical 4189 Response dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB 63 Hz 80 Hz 63.0957 Hz 79.4328 Hz 0.00 0.00 0.05 0.05 0.00 0.00 0.05 0.05 0.00 0.00 0.00 0.00 0.07 0.07 100 Hz 125 Hz 160 Hz 100 Hz 125.893 Hz 158.489 Hz 0.00 0.00 0.00 0.05 0.05 0.05 0.00 0.00 0.00 0.05 0.05 0.05 0.00 0.00 0.01 0.00 0.00 0.01 0.07 0.07 0.07 200 Hz 250 Hz 315 Hz 199.526 Hz 251.189 Hz 316.228 Hz 0.01 0.00 –0.01 0.05 0.05 0.06 0.00 0.01 0.02 0.05 0.05 0.05 0.01 0.01 0.02 0.02 0.02 0.03 0.07 0.07 0.08 400 Hz 500 Hz 630 Hz 398.107 Hz 501.187 Hz 630.957 Hz –0.03 –0.04 –0.06 0.06 0.07 0.07 0.04 0.05 0.07 0.05 0.05 0.05 0.02 0.03 0.05 0.03 0.04 0.07 0.08 0.09 0.09 800 Hz 1000 Hz 1060 Hz 1120 Hz 794.328 Hz 1000 Hz 1059.25 Hz 1122.02 Hz –0.08 –0.11 –0.12 –0.13 0.07 0.07 0.07 0.07 0.10 0.09 0.07 0.05 0.05 0.05 0.08 0.08 0.08 0.13 0.15 0.16 0.10 0.11 0.10 0.08 0.09 0.09 0.11 0.11 1180 Hz 1250 Hz 1320 Hz 1400 Hz 1188.50 Hz 1258.93 Hz 1333.52 Hz 1412.54 Hz –0.15 –0.17 –0.19 –0.21 0.08 0.08 0.08 0.08 0.03 0.02 0.02 0.02 0.08 0.08 0.10 0.10 0.18 0.21 0.23 0.26 0.06 0.06 0.06 0.07 0.11 0.11 0.13 0.13 BE171211.book Page 65 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Nominal Frequency Exact Frequency 1500 Hz 1600 Hz 1700 Hz 1800 Hz 1496.24 Hz 1584.89 Hz 1678.80 Hz 1778.28 Hz 1900 Hz 2000 Hz 2120 Hz 2240 Hz Typical 4189 Response dB Expanded Uncertainty dB Influence of Windscreen dB Expanded Uncertainty dB Electrical Response dB Acoustical Response dB Expanded Uncertainty dB –0.23 –0.26 –0.28 –0.29 0.08 0.08 0.08 0.09 0.03 0.03 0.03 0.03 0.10 0.12 0.15 0.15 0.29 0.32 0.35 0.39 0.08 0.10 0.11 0.13 0.13 0.14 0.17 0.17 1883.65 Hz 1995.26 Hz 2113.49 Hz 2238.72 Hz –0.30 –0.31 –0.32 –0.35 0.09 0.09 0.09 0.09 0.02 0.00 –0.03 –0.05 0.15 0.15 0.15 0.15 0.44 0.49 0.54 0.60 0.15 0.17 0.19 0.20 0.17 0.17 0.17 0.17 2360 Hz 2500 Hz 2650 Hz 2800 Hz 2371.37 Hz 2511.89 Hz 2660.73 Hz 2818.38 Hz –0.38 –0.44 –0.50 –0.56 0.10 0.10 0.10 0.11 –0.08 –0.10 –0.13 –0.18 0.15 0.15 0.15 0.15 0.66 0.73 0.81 0.89 0.20 0.20 0.18 0.15 0.18 0.18 0.18 0.19 3000 Hz 3150 Hz 3350 Hz 3550 Hz 2985.38 Hz 3162.28 Hz 3349.65 Hz 3548.13 Hz –0.62 –0.69 –0.76 –0.83 0.11 0.12 0.12 0.13 –0.23 –0.29 –0.35 –0.40 0.15 0.15 0.15 0.15 0.98 1.07 1.17 1.28 0.12 0.09 0.07 0.05 0.19 0.19 0.19 0.20 3750 Hz 4000 Hz 4250 Hz 4500 Hz 3758.37 Hz 3981.07 Hz 4216.97 Hz 4466.84 Hz –0.91 –1.01 –1.15 –1.29 0.13 0.14 0.14 0.14 –0.46 –0.50 –0.52 –0.55 0.15 0.15 0.15 0.15 1.40 1.52 1.64 1.77 0.03 0.00 –0.03 –0.06 0.20 0.21 0.21 0.21 4750 Hz 5000 Hz 5300 Hz 5600 Hz 4731.51 Hz 5011.87 Hz 5308.84 Hz 5623.41 Hz –1.41 –1.51 –1.63 –1.77 0.14 0.15 0.15 0.15 –0.60 –0.70 –0.83 –0.94 0.25 0.35 0.45 0.50 1.90 2.04 2.17 2.30 –0.11 –0.18 –0.29 –0.42 0.29 0.38 0.47 0.52 6000 Hz 6300 Hz 6700 Hz 7100 Hz 5956.62 Hz 6309.57 Hz 6683.44 Hz 7079.46 Hz –1.94 –2.12 –2.28 –2.45 0.16 0.16 0.17 0.17 –1.01 –1.00 –0.89 –0.67 0.50 0.50 0.50 0.50 2.42 2.54 2.63 2.71 –0.53 –0.58 –0.55 –0.41 0.52 0.52 0.53 0.53 7500 Hz 8000 Hz 8500 Hz 9000 Hz 7498.94 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz –2.58 –2.75 –2.97 –3.19 0.17 0.18 0.19 0.20 –0.42 –0.08 0.30 0.67 0.50 0.50 0.50 0.50 2.77 2.79 2.77 2.71 –0.22 –0.04 0.10 0.19 0.53 0.53 0.53 0.54 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz –3.41 –3.57 –3.71 –3.81 0.22 0.23 0.24 0.26 1.00 1.23 1.40 1.47 0.50 0.50 0.80 0.80 2.61 2.48 2.37 2.34 0.20 0.14 0.06 –0.01 0.55 0.55 0.84 0.84 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz –3.95 –4.19 –4.39 –4.56 0.28 0.29 0.31 0.33 1.47 1.36 1.02 0.69 0.80 0.80 0.80 0.80 2.47 2.81 3.32 3.90 –0.01 –0.02 –0.05 0.03 0.85 0.85 0.86 0.87 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz –4.79 –5.10 –5.49 –6.03 0.35 0.38 0.40 0.43 0.43 0.25 0.34 0.56 0.80 0.80 0.80 0.80 4.43 4.86 5.16 5.34 0.07 0.01 0.00 –0.13 0.87 0.89 0.89 0.91 19000 Hz 20000 Hz 21200 Hz 22400 Hz 18836.5 Hz 19952.6 Hz 21134.9 Hz 22387.2 Hz –6.74 –7.61 –8.63 –9.89 0.45 0.48 0.49 0.49 0.63 0.49 0.40 –0.02 0.80 0.80 0.80 0.80 5.41 5.41 5.34 5.25 –0.69 –1.71 –2.88 –4.66 0.92 0.93 0.94 0.94 65 BE171211.book Page 66 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 66 A.4 Directional Responses Directional responses, including sensitivity variations of equipment at varying sound incidence angles and influence of equipment on the directional responses. Table A.10 Directional response for Microphone Type 4189 only, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.00 0.00 0.00 0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 –0.01 –0.01 –0.01 0.00 –0.02 –0.02 –0.02 –0.01 –0.03 0.00 –0.01 –0.02 –0.02 –0.03 –0.04 0.00 –0.01 –0.01 –0.01 –0.03 –0.04 0.00 0.00 –0.01 –0.01 –0.02 –0.03 0.00 –0.01 –0.01 –0.01 –0.02 –0.04 0.00 0.00 –0.01 –0.03 –0.05 –0.07 0.00 –0.01 –0.02 –0.04 –0.07 –0.12 0.00 –0.01 –0.02 –0.03 –0.06 –0.10 0.00 –0.01 –0.01 –0.03 –0.06 –0.09 30° 35° 40° 45° 50° 55° 0.01 0.01 0.00 0.00 –0.01 –0.01 0.00 0.00 –0.01 –0.02 –0.02 –0.03 –0.01 –0.02 –0.03 –0.04 –0.04 –0.05 –0.04 –0.04 –0.04 –0.05 –0.07 –0.07 –0.05 –0.05 –0.07 –0.08 –0.10 –0.11 –0.06 –0.08 –0.10 –0.12 –0.15 –0.17 –0.04 –0.06 –0.08 –0.10 –0.14 –0.17 –0.05 –0.07 –0.08 –0.10 –0.12 –0.15 –0.09 –0.13 –0.15 –0.17 –0.20 –0.23 –0.16 –0.20 –0.25 –0.29 –0.35 –0.40 –0.15 –0.20 –0.26 –0.33 –0.40 –0.47 –0.15 –0.19 –0.25 –0.32 –0.40 –0.49 60° 65° 70° 75° 80° 85° 90° 95° 100° 105° 110° 115° –0.02 –0.02 –0.03 –0.03 –0.04 –0.04 –0.05 –0.05 –0.05 –0.06 –0.06 –0.06 –0.03 –0.04 –0.05 –0.05 –0.06 –0.06 –0.07 –0.07 –0.08 –0.08 –0.08 –0.09 –0.06 –0.07 –0.07 –0.08 –0.09 –0.10 –0.10 –0.11 –0.11 –0.12 –0.12 –0.12 –0.08 –0.10 –0.10 –0.12 –0.13 –0.15 –0.15 –0.15 –0.17 –0.17 –0.17 –0.18 –0.13 –0.14 –0.16 –0.18 –0.19 –0.21 –0.22 –0.23 –0.25 –0.25 –0.26 –0.26 –0.20 –0.22 –0.25 –0.27 –0.29 –0.31 –0.33 –0.35 –0.37 –0.38 –0.39 –0.40 –0.20 –0.24 –0.27 –0.31 –0.35 –0.38 –0.41 –0.44 –0.47 –0.49 –0.51 –0.52 –0.18 –0.22 –0.25 –0.30 –0.34 –0.38 –0.42 –0.45 –0.49 –0.52 –0.54 –0.56 –0.25 –0.28 –0.31 –0.35 –0.39 –0.42 –0.47 –0.51 –0.55 –0.59 –0.62 –0.65 –0.43 –0.46 –0.49 –0.52 –0.55 –0.58 –0.62 –0.65 –0.70 –0.74 –0.78 –0.81 –0.54 –0.60 –0.65 –0.70 –0.73 –0.77 –0.79 –0.83 –0.86 –0.90 –0.93 –0.97 –0.57 –0.65 –0.73 –0.80 –0.86 –0.91 –0.96 –1.00 –1.03 –1.06 –1.09 –1.13 120° 125° 130° 135° 140° 145° –0.06 –0.06 –0.06 –0.06 –0.06 –0.05 –0.09 –0.09 –0.08 –0.08 –0.08 –0.08 –0.13 –0.12 –0.12 –0.12 –0.11 –0.11 –0.18 –0.17 –0.17 –0.17 –0.16 –0.15 –0.26 –0.26 –0.25 –0.25 –0.24 –0.22 –0.40 –0.39 –0.38 –0.37 –0.36 –0.34 –0.53 –0.52 –0.51 –0.50 –0.47 –0.44 –0.57 –0.57 –0.56 –0.55 –0.52 –0.49 –0.67 –0.68 –0.67 –0.65 –0.62 –0.59 –0.84 –0.85 –0.85 –0.84 –0.81 –0.77 –1.00 –1.03 –1.04 –1.03 –1.00 –0.95 –1.17 –1.20 –1.22 –1.21 –1.19 –1.14 150° 155° 160° 165° 170° 175° –0.05 –0.05 –0.05 –0.04 –0.04 –0.04 –0.08 –0.07 –0.07 –0.07 –0.06 –0.06 –0.11 –0.11 –0.10 –0.10 –0.10 –0.09 –0.14 –0.14 –0.13 –0.12 –0.12 –0.12 –0.22 –0.20 –0.19 –0.19 –0.18 –0.18 –0.32 –0.30 –0.29 –0.28 –0.27 –0.26 –0.42 –0.39 –0.37 –0.35 –0.33 –0.32 –0.45 –0.42 –0.39 –0.36 –0.34 –0.33 –0.55 –0.50 –0.47 –0.43 –0.41 –0.39 –0.71 –0.66 –0.61 –0.57 –0.54 –0.52 –0.89 –0.83 –0.77 –0.72 –0.68 –0.66 –1.07 –1.00 –0.93 –0.86 –0.82 –0.79 180° 185° 190° 195° 200° 205° –0.04 –0.04 –0.04 –0.04 –0.05 –0.05 –0.06 –0.06 –0.06 –0.07 –0.07 –0.07 –0.09 –0.09 –0.10 –0.10 –0.10 –0.11 –0.12 –0.11 –0.12 –0.13 –0.13 –0.13 –0.18 –0.18 –0.18 –0.19 –0.19 –0.20 –0.26 –0.27 –0.27 –0.28 –0.29 –0.31 –0.32 –0.32 –0.33 –0.35 –0.37 –0.40 –0.33 –0.34 –0.35 –0.37 –0.39 –0.43 –0.39 –0.40 –0.41 –0.44 –0.47 –0.51 –0.52 –0.53 –0.54 –0.57 –0.62 –0.66 –0.65 –0.66 –0.68 –0.72 –0.78 –0.84 –0.78 –0.79 –0.82 –0.87 –0.94 –1.01 210° 215° 220° 225° 230° 235° –0.05 –0.05 –0.06 –0.06 –0.06 –0.06 –0.08 –0.08 –0.08 –0.08 –0.08 –0.09 –0.11 –0.11 –0.11 –0.12 –0.12 –0.12 –0.14 –0.15 –0.15 –0.16 –0.17 –0.17 –0.22 –0.23 –0.24 –0.25 –0.26 –0.26 –0.32 –0.34 –0.36 –0.38 –0.39 –0.40 –0.42 –0.45 –0.48 –0.50 –0.52 –0.53 –0.46 –0.49 –0.53 –0.55 –0.57 –0.58 –0.55 –0.59 –0.63 –0.66 –0.68 –0.69 –0.72 –0.77 –0.81 –0.85 –0.86 –0.87 –0.90 –0.96 –1.01 –1.04 –1.06 –1.05 –1.09 –1.16 –1.21 –1.24 –1.25 –1.23 240° 245° 250° 255° 260° 265° –0.06 –0.06 –0.06 –0.06 –0.05 –0.05 –0.09 –0.09 –0.08 –0.08 –0.08 –0.07 –0.13 –0.12 –0.12 –0.12 –0.11 –0.11 –0.16 –0.17 –0.17 –0.17 –0.16 –0.15 –0.27 –0.27 –0.26 –0.26 –0.25 –0.24 –0.40 –0.40 –0.40 –0.39 –0.37 –0.36 –0.53 –0.53 –0.52 –0.50 –0.48 –0.45 –0.58 –0.57 –0.56 –0.53 –0.50 –0.47 –0.68 –0.67 –0.64 –0.60 –0.56 –0.52 –0.85 –0.83 –0.79 –0.75 –0.70 –0.65 –1.03 –0.99 –0.95 –0.90 –0.85 –0.81 –1.20 –1.15 –1.10 –1.05 –1.01 –0.97 270° 275° 280° 285° 290° 295° –0.05 –0.04 –0.04 –0.03 –0.03 –0.02 –0.07 –0.06 –0.06 –0.05 –0.05 –0.04 –0.10 –0.10 –0.09 –0.08 –0.07 –0.07 –0.14 –0.13 –0.12 –0.11 –0.10 –0.09 –0.22 –0.21 –0.19 –0.18 –0.16 –0.15 –0.34 –0.32 –0.30 –0.28 –0.26 –0.23 –0.42 –0.39 –0.35 –0.31 –0.27 –0.23 –0.42 –0.38 –0.33 –0.29 –0.24 –0.21 –0.47 –0.42 –0.37 –0.33 –0.30 –0.27 –0.60 –0.56 –0.52 –0.50 –0.48 –0.46 –0.77 –0.74 –0.72 –0.70 –0.67 –0.62 –0.95 –0.92 –0.88 –0.83 –0.75 –0.66 300° 305° 310° 315° 320° 325° –0.02 –0.01 –0.01 0.00 0.00 0.01 –0.03 –0.03 –0.02 –0.02 –0.01 0.00 –0.06 –0.05 –0.04 –0.04 –0.03 –0.02 –0.07 –0.06 –0.05 –0.04 –0.03 –0.02 –0.12 –0.11 –0.09 –0.08 –0.07 –0.05 –0.20 –0.17 –0.15 –0.12 –0.10 –0.08 –0.19 –0.15 –0.12 –0.09 –0.07 –0.05 –0.17 –0.14 –0.12 –0.10 –0.08 –0.06 –0.24 –0.23 –0.21 –0.18 –0.16 –0.14 –0.43 –0.40 –0.36 –0.31 –0.26 –0.21 –0.56 –0.48 –0.40 –0.32 –0.25 –0.19 –0.56 –0.46 –0.38 –0.30 –0.24 –0.19 330° 335° 340° 345° 350° 355° 0.01 0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 –0.01 –0.01 –0.01 –0.01 0.00 0.00 –0.01 0.01 0.01 0.02 0.02 0.02 –0.04 –0.03 –0.01 0.00 0.00 0.00 –0.05 –0.04 –0.02 –0.01 –0.01 0.00 –0.03 –0.02 –0.01 0.00 0.00 0.01 –0.05 –0.04 –0.03 –0.02 –0.01 0.00 –0.11 –0.08 –0.06 –0.04 –0.02 –0.02 –0.16 –0.11 –0.07 –0.04 –0.03 –0.01 –0.13 –0.09 –0.05 –0.02 0.00 0.01 –0.14 –0.09 –0.06 –0.03 –0.01 0.01 BE171211.book Page 67 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Table A.11 Directional response for Microphone Type 4189 only, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 10000 Hz 10600 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.01 –0.03 –0.05 –0.09 –0.15 0.00 –0.01 –0.04 –0.08 –0.14 –0.23 0.00 –0.01 –0.03 –0.04 –0.08 –0.15 0.00 –0.01 –0.05 –0.10 –0.17 –0.26 0.00 0.00 –0.02 –0.06 –0.11 –0.19 0.00 0.00 –0.04 –0.10 –0.20 –0.35 0.00 0.00 –0.06 –0.15 –0.26 –0.40 0.00 –0.01 –0.05 –0.12 –0.21 –0.36 0.00 –0.01 –0.09 –0.21 –0.37 –0.58 0.00 0.00 –0.05 –0.11 –0.22 –0.41 0.00 –0.02 –0.11 –0.23 –0.39 –0.57 0.00 –0.01 –0.05 –0.11 –0.23 –0.43 30° 35° 40° 45° 50° 55° –0.21 –0.26 –0.33 –0.40 –0.49 –0.58 –0.33 –0.41 –0.50 –0.59 –0.68 –0.78 –0.26 –0.39 –0.54 –0.72 –0.88 –1.02 –0.33 –0.39 –0.44 –0.53 –0.68 –0.92 –0.31 –0.46 –0.64 –0.84 –0.99 –1.09 –0.53 –0.74 –0.90 –1.05 –1.21 –1.41 –0.52 –0.63 –0.74 –0.94 –1.23 –1.59 –0.55 –0.79 –1.01 –1.18 –1.31 –1.52 –0.77 –0.94 –1.15 –1.44 –1.76 –2.00 –0.68 –1.02 –1.35 –1.59 –1.79 –2.15 –0.71 –0.86 –1.15 –1.61 –2.04 –2.22 –0.74 –1.10 –1.39 –1.61 –2.00 –2.66 60° 65° 70° 75° 80° 85° 90° 95° 100° 105° 110° 115° –0.68 –0.77 –0.86 –0.93 –1.00 –1.06 –1.12 –1.18 –1.22 –1.25 –1.28 –1.31 –0.89 –1.02 –1.15 –1.27 –1.34 –1.40 –1.44 –1.51 –1.56 –1.60 –1.62 –1.65 –1.11 –1.20 –1.33 –1.52 –1.71 –1.85 –1.92 –1.96 –1.99 –2.04 –2.07 –2.09 –1.19 –1.39 –1.49 –1.54 –1.64 –1.84 –2.07 –2.22 –2.29 –2.31 –2.32 –2.33 –1.20 –1.42 –1.76 –2.08 –2.23 –2.27 –2.35 –2.53 –2.71 –2.82 –2.86 –2.87 –1.64 –1.79 –1.91 –2.12 –2.47 –2.81 –3.01 –3.11 –3.23 –3.37 –3.48 –3.53 –1.88 –2.10 –2.34 –2.61 –2.84 –3.04 –3.27 –3.52 –3.73 –3.87 –3.97 –4.04 –1.85 –2.21 –2.44 –2.63 –2.95 –3.34 –3.61 –3.79 –3.98 –4.19 –4.32 –4.41 –2.16 –2.45 –2.87 –3.11 –3.19 –3.49 –3.98 –4.28 –4.41 –4.57 –4.74 –4.85 –2.55 –2.80 –3.11 –3.63 –3.92 –3.87 –4.12 –4.69 –5.02 –5.14 –5.32 –5.45 –2.42 –2.85 –3.17 –3.46 –4.11 –4.51 –4.42 –4.68 –5.22 –5.49 –5.64 –5.78 –3.08 –3.24 –3.63 –3.96 –4.14 –4.73 –5.19 –5.23 –5.61 –6.01 –6.21 –6.42 120° 125° 130° 135° 140° 145° –1.34 –1.38 –1.41 –1.41 –1.39 –1.34 –1.68 –1.71 –1.74 –1.76 –1.75 –1.69 –2.11 –2.15 –2.20 –2.23 –2.24 –2.20 –2.34 –2.36 –2.39 –2.44 –2.46 –2.42 –2.84 –2.83 –2.85 –2.90 –2.96 –2.97 –3.53 –3.48 –3.46 –3.49 –3.57 –3.63 –4.06 –4.02 –3.92 –3.87 –3.91 –3.98 –4.48 –4.48 –4.38 –4.28 –4.28 –4.36 –4.93 –4.94 –4.84 –4.70 –4.66 –4.72 –5.54 –5.60 –5.50 –5.33 –5.28 –5.32 –5.85 –5.93 –5.87 –5.65 –5.53 –5.57 –6.51 –6.59 –6.63 –6.43 –6.22 –6.22 150° 155° 160° 165° 170° 175° –1.26 –1.17 –1.09 –1.01 –0.95 –0.92 –1.61 –1.50 –1.38 –1.29 –1.21 –1.16 –2.11 –1.99 –1.85 –1.73 –1.65 –1.59 –2.32 –2.18 –2.01 –1.86 –1.74 –1.67 –2.88 –2.73 –2.54 –2.35 –2.20 –2.11 –3.60 –3.45 –3.24 –3.01 –2.83 –2.71 –3.99 –3.86 –3.62 –3.35 –3.13 –2.99 –4.40 –4.29 –4.05 –3.77 –3.52 –3.36 –4.77 –4.69 –4.45 –4.15 –3.88 –3.71 –5.37 –5.27 –5.02 –4.69 –4.40 –4.20 –5.63 –5.56 –5.29 –4.94 –4.61 –4.39 –6.31 –6.25 –5.98 –5.57 –5.20 –4.96 180° 185° 190° 195° 200° 205° –0.90 –0.92 –0.95 –1.02 –1.09 –1.19 –1.14 –1.17 –1.21 –1.29 –1.39 –1.51 –1.58 –1.60 –1.66 –1.77 –1.90 –2.04 –1.65 –1.68 –1.77 –1.90 –2.06 –2.22 –2.09 –2.13 –2.23 –2.39 –2.58 –2.76 –2.68 –2.73 –2.86 –3.04 –3.26 –3.46 –2.94 –2.99 –3.14 –3.36 –3.63 –3.88 –3.31 –3.37 –3.53 –3.78 –4.09 –4.37 –3.64 –3.71 –3.89 –4.19 –4.54 –4.84 –4.13 –4.20 –4.41 –4.75 –5.15 –5.43 –4.32 –4.41 –4.67 –5.07 –5.49 –5.73 –4.88 –5.00 –5.31 –5.75 –6.14 –6.33 210° 215° 220° 225° 230° 235° –1.28 –1.36 –1.42 –1.45 –1.44 –1.40 –1.63 –1.72 –1.77 –1.78 –1.76 –1.72 –2.17 –2.26 –2.29 –2.27 –2.23 –2.17 –2.36 –2.44 –2.46 –2.44 –2.39 –2.34 –2.90 –2.97 –2.97 –2.93 –2.87 –2.83 –3.61 –3.67 –3.65 –3.59 –3.53 –3.52 –4.04 –4.06 –3.99 –3.92 –3.95 –4.02 –4.52 –4.49 –4.38 –4.33 –4.36 –4.42 –4.93 –4.83 –4.73 –4.75 –4.80 –4.85 –5.47 –5.38 –5.33 –5.35 –5.41 –5.51 –5.72 –5.65 –5.59 –5.56 –5.66 –5.81 –6.33 –6.27 –6.19 –6.21 –6.41 –6.51 240° 245° 250° 255° 260° 265° –1.36 –1.32 –1.27 –1.23 –1.19 –1.17 –1.68 –1.63 –1.59 –1.56 –1.53 –1.51 –2.12 –2.08 –2.05 –2.02 –2.01 –1.98 –2.29 –2.27 –2.28 –2.30 –2.28 –2.16 –2.81 –2.83 –2.87 –2.82 –2.66 –2.45 –3.55 –3.59 –3.54 –3.37 –3.19 –3.12 –4.07 –4.04 –3.92 –3.78 –3.71 –3.53 –4.44 –4.38 –4.25 –4.13 –3.99 –3.74 –4.88 –4.81 –4.65 –4.53 –4.41 –4.18 –5.54 –5.35 –5.17 –5.11 –4.94 –4.55 –5.73 –5.47 –5.44 –5.39 –4.97 –4.49 –6.28 –6.13 –6.17 –5.89 –5.39 –5.17 270° 275° 280° 285° 290° 295° –1.13 –1.08 –1.01 –0.92 –0.82 –0.72 –1.46 –1.40 –1.30 –1.22 –1.10 –1.00 –1.91 –1.79 –1.64 –1.49 –1.35 –1.23 –1.97 –1.77 –1.63 –1.55 –1.48 –1.32 –2.32 –2.29 –2.24 –2.03 –1.69 –1.38 –3.07 –2.82 –2.41 –2.09 –1.94 –1.83 –3.20 –2.93 –2.82 –2.62 –2.26 –1.99 –3.48 –3.29 –2.96 –2.55 –2.32 –2.21 –3.89 –3.48 –3.10 –2.98 –2.90 –2.53 –4.08 –3.79 –3.77 –3.62 –3.14 –2.73 –4.29 –4.31 –4.03 –3.45 –3.05 –2.78 –5.05 –4.64 –4.15 –3.89 –3.60 –3.23 300° 305° 310° 315° 320° 325° –0.63 –0.55 –0.48 –0.41 –0.35 –0.28 –0.90 –0.80 –0.72 –0.62 –0.51 –0.41 –1.12 –0.99 –0.82 –0.66 –0.48 –0.35 –1.09 –0.85 –0.66 –0.54 –0.47 –0.41 –1.20 –1.10 –0.99 –0.81 –0.60 –0.41 –1.60 –1.32 –1.14 –1.04 –0.96 –0.81 –1.86 –1.65 –1.30 –0.93 –0.70 –0.60 –1.94 –1.53 –1.24 –1.13 –1.04 –0.86 –2.11 –1.91 –1.76 –1.50 –1.17 –0.89 –2.50 –2.19 –1.80 –1.49 –1.26 –1.02 –2.41 –2.10 –1.89 –1.61 –1.25 –0.95 –2.96 –2.60 –2.10 –1.71 –1.39 –1.05 330° 335° 340° 345° 350° 355° –0.23 –0.18 –0.13 –0.09 –0.06 –0.05 –0.31 –0.21 –0.13 –0.06 –0.02 0.01 –0.24 –0.16 –0.10 –0.08 –0.05 –0.05 –0.35 –0.27 –0.18 –0.11 –0.05 –0.01 –0.27 –0.18 –0.12 –0.07 –0.05 –0.03 –0.62 –0.41 –0.24 –0.12 –0.04 0.00 –0.54 –0.47 –0.37 –0.26 –0.15 –0.10 –0.63 –0.40 –0.22 –0.11 –0.03 0.01 –0.70 –0.54 –0.38 –0.24 –0.13 –0.05 –0.76 –0.51 –0.32 –0.19 –0.11 –0.06 –0.72 –0.54 –0.35 –0.19 –0.06 0.01 –0.72 –0.45 –0.29 –0.18 –0.11 –0.07 67 BE171211.book Page 68 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 68 Table A.12 Directional response for Microphone Type 4189 only, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.02 –0.10 –0.24 –0.42 –0.64 0.00 –0.02 –0.10 –0.20 –0.32 –0.49 0.00 –0.02 –0.10 –0.22 –0.45 –0.78 0.00 –0.04 –0.15 –0.31 –0.53 –0.79 0.00 –0.04 –0.17 –0.34 –0.54 –0.78 0.00 –0.03 –0.09 –0.19 –0.38 –0.74 0.00 –0.04 –0.12 –0.29 –0.57 –0.94 0.00 –0.05 –0.17 –0.38 –0.67 –1.03 0.00 –0.06 –0.22 –0.47 –0.84 –1.24 0.00 –0.05 –0.20 –0.45 –0.77 –1.13 0.00 –0.02 –0.17 –0.43 –0.79 –1.19 30° 35° 40° 45° 50° 55° –0.81 –0.98 –1.29 –1.77 –2.13 –2.35 –0.73 –1.10 –1.48 –1.76 –2.15 –2.73 –1.12 –1.40 –1.61 –2.00 –2.52 –2.91 –1.04 –1.39 –1.92 –2.45 –2.71 –3.18 –1.08 –1.53 –1.96 –2.31 –2.92 –3.53 –1.28 –1.79 –2.15 –2.70 –3.39 –3.82 –1.25 –1.55 –2.16 –2.88 –3.24 –3.91 –1.35 –1.79 –2.39 –2.92 –3.70 –4.55 –1.63 –2.18 –2.83 –3.32 –4.04 –4.75 –1.58 –2.29 –2.91 –3.42 –4.29 –4.86 –1.62 –2.33 –2.98 –3.76 –4.66 –5.40 60° 65° 70° 75° 80° 85° –2.90 –3.57 –3.83 –4.25 –4.74 –4.89 –3.12 –3.48 –4.07 –4.35 –4.75 –5.45 –3.42 –4.12 –4.62 –5.22 –5.50 –5.65 –3.79 –4.10 –4.73 –5.36 –5.95 –6.54 –3.86 –4.66 –5.23 –5.80 –6.43 –6.78 –4.52 –4.85 –5.40 –6.18 –6.90 –7.82 –4.59 –5.26 –6.01 –6.56 –7.25 –7.77 –5.04 –5.93 –6.33 –7.08 –7.81 –8.83 –5.58 –6.18 –7.17 –7.97 –8.68 –9.15 –5.94 –6.84 –7.80 –8.37 –9.11 –10.15 –6.39 –7.19 –8.02 –9.08 –10.04 –10.84 90° 95° 100° 105° 110° 115° –5.32 –5.69 –5.93 –6.28 –6.49 –6.78 –5.81 –5.99 –6.27 –6.77 –7.01 –7.22 –6.40 –6.98 –6.97 –7.36 –7.85 –7.94 –6.57 –7.27 –7.83 –7.75 –8.39 –8.61 –7.60 –7.73 –8.47 –8.74 –8.94 –9.60 –7.80 –8.56 –8.92 –9.58 –9.53 –10.15 –8.91 –8.91 –9.52 –10.15 –10.39 –10.60 –9.16 –10.08 –10.33 –10.85 –11.50 –11.49 –10.32 –10.90 –11.45 –11.84 –12.57 –12.80 –10.74 –11.72 –12.41 –12.69 –13.32 –13.81 –11.48 –12.42 –13.12 –13.76 –13.94 –14.94 120° 125° 130° 135° 140° 145° –6.91 –6.91 –7.02 –6.87 –6.58 –6.54 –7.50 –7.43 –7.52 –7.50 –7.11 –6.95 –8.29 –8.26 –8.15 –8.32 –7.98 –7.63 –8.82 –9.06 –8.80 –8.95 –8.83 –8.32 –9.57 –10.01 –9.81 –9.76 –9.82 –9.31 –10.31 –10.52 –10.73 –10.40 –10.51 –10.14 –11.27 –11.10 –11.55 –11.28 –11.22 –10.94 –12.16 –12.26 –12.46 –12.48 –12.33 –12.05 –13.14 –13.67 –13.57 –13.76 –13.58 –13.42 –14.00 –14.59 –14.59 –14.76 –14.42 –14.53 –14.84 –15.36 –15.51 –15.65 –15.53 –15.26 150° 155° 160° 165° 170° 175° –6.64 –6.60 –6.31 –5.89 –5.49 –5.24 –7.15 –7.24 –6.96 –6.47 –6.02 –5.74 –7.76 –7.96 –7.74 –7.23 –6.73 –6.41 –8.29 –8.54 –8.45 –7.95 –7.40 –7.02 –9.07 –9.27 –9.23 –8.74 –8.11 –7.68 –9.79 –9.91 –9.94 –9.46 –8.81 –8.33 –10.56 –10.68 –10.70 –10.18 –9.47 –8.95 –11.56 –11.72 –11.89 –11.34 –10.55 –9.98 –12.64 –12.70 –13.03 –12.55 –11.64 –10.99 –13.63 –13.38 –13.89 –13.59 –12.61 –11.85 –14.82 –14.18 –14.53 –14.58 –13.75 –13.02 180° 185° 190° 195° 200° 205° –5.18 –5.33 –5.67 –6.10 –6.43 –6.60 –5.67 –5.83 –6.18 –6.59 –6.92 –7.13 –6.32 –6.46 –6.78 –7.19 –7.61 –7.82 –6.90 –7.03 –7.36 –7.86 –8.36 –8.46 –7.51 –7.62 –8.02 –8.65 –9.17 –9.11 –8.14 –8.29 –8.80 –9.50 –9.85 –9.71 –8.77 –9.00 –9.62 –10.28 –10.52 –10.48 –9.81 –10.10 –10.72 –11.30 –11.60 –11.56 –10.79 –11.04 –11.60 –12.22 –12.66 –12.42 –11.59 –11.77 –12.35 –13.19 –13.51 –13.24 –12.76 –13.09 –14.05 –15.07 –15.06 –15.06 210° 215° 220° 225° 230° 235° –6.62 –6.52 –6.42 –6.58 –6.84 –6.79 –7.13 –6.96 –6.97 –7.19 –7.28 –7.21 –7.68 –7.53 –7.70 –7.90 –8.00 –7.94 –8.23 –8.24 –8.44 –8.58 –8.72 –8.56 –8.94 –9.03 –9.19 –9.48 –9.49 –9.35 –9.66 –9.69 –9.93 –10.20 –10.09 –10.11 –10.37 –10.44 –10.87 –10.94 –10.96 –10.88 –11.35 –11.71 –11.96 –12.19 –12.05 –12.04 –12.44 –12.84 –13.09 –13.36 –13.11 –13.33 –13.51 –13.75 –14.33 –14.27 –14.35 –14.25 –15.09 –15.65 –16.05 –15.97 –16.11 –15.75 240° 245° 250° 255° 260° 265° –6.58 –6.54 –6.38 –6.02 –5.77 –5.54 –7.16 –7.07 –6.81 –6.47 –6.10 –5.75 –7.80 –7.73 –7.50 –7.05 –6.72 –6.67 –8.49 –8.41 –7.92 –7.57 –7.48 –7.04 –9.40 –9.05 –8.61 –8.42 –8.09 –7.59 –9.99 –9.58 –9.23 –9.04 –8.66 –8.25 –10.78 –10.25 –10.02 –9.79 –9.34 –8.62 –11.79 –11.25 –11.15 –10.71 –10.12 –9.84 –12.72 –12.55 –12.20 –11.76 –11.16 –10.76 –13.71 –13.52 –13.30 –12.59 –12.27 –11.64 –15.41 –15.09 –14.49 –14.07 –13.75 –13.00 270° 275° 280° 285° 290° 295° –5.12 –4.82 –4.60 –4.14 –3.75 –3.40 –5.63 –5.30 –4.62 –4.25 –3.91 –3.41 –6.23 –5.50 –5.32 –5.01 –4.53 –4.10 –6.44 –6.31 –5.75 –5.24 –4.69 –3.96 –7.35 –6.58 –6.26 –5.74 –5.07 –4.73 –7.50 –7.47 –6.76 –5.92 –5.40 –4.64 –8.60 –7.65 –7.01 –6.54 –5.84 –5.28 –9.06 –8.66 –7.79 –6.97 –6.34 –5.88 –10.22 –9.12 –8.66 –7.95 –7.25 –6.19 –10.69 –10.24 –9.13 –8.55 –7.79 –7.01 –12.15 –11.35 –10.68 –9.55 –8.61 –7.89 300° 305° 310° 315° 320° 325° –2.84 –2.37 –2.05 –1.63 –1.25 –1.02 –3.09 –2.63 –2.10 –1.80 –1.52 –1.08 –3.31 –2.83 –2.55 –1.98 –1.55 –1.40 –3.78 –3.22 –2.60 –2.43 –2.01 –1.39 –3.80 –3.43 –3.02 –2.29 –1.88 –1.57 –4.46 –3.77 –3.26 –2.74 –2.14 –1.73 –4.49 –3.91 –3.24 –2.83 –2.21 –1.62 –5.11 –4.50 –3.80 –2.97 –2.39 –1.84 –5.64 –4.83 –4.11 –3.41 –2.91 –2.23 –6.06 –4.98 –4.39 –3.55 –2.96 –2.42 –6.93 –6.00 –5.11 –4.27 –3.35 –2.73 330° 335° 340° 345° 350° 355° –0.87 –0.66 –0.43 –0.21 –0.07 0.01 –0.68 –0.46 –0.34 –0.25 –0.15 –0.07 –1.20 –0.82 –0.46 –0.21 –0.07 –0.01 –0.98 –0.77 –0.58 –0.37 –0.18 –0.06 –1.15 –0.80 –0.53 –0.32 –0.15 –0.03 –1.28 –0.79 –0.43 –0.22 –0.10 –0.03 –1.24 –0.91 –0.57 –0.32 –0.16 –0.07 –1.43 –1.07 –0.68 –0.35 –0.14 –0.03 –1.69 –1.32 –0.93 –0.52 –0.21 –0.03 –1.70 –1.20 –0.86 –0.53 –0.25 –0.07 –1.98 –1.43 –1.01 –0.61 –0.29 –0.09 BE171211.book Page 69 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 69 Table A.13 Sensitivity variations of Microphone Type 4189 (only) at sound incidence angles within ±θ ° from the reference direction. –Nominal Frequency Exact Frequency Max Variation ± 30° Max Variation Max Variation ± 90° ± 150° 500 Hz 630 Hz 501.187 Hz 630.957 Hz 0.01 0.00 0.06 0.08 0.08 0.09 800 Hz 1000 Hz 1250 Hz 794.328 Hz 1000 Hz 1258.93 Hz 0.01 0.06 0.05 0.10 0.17 0.23 0.13 0.20 0.27 1600 Hz 2000 Hz 2240 Hz 2500 Hz 1584.89 Hz 1995.26 Hz 2238.72 Hz 2511.89 Hz 0.06 0.05 0.05 0.11 0.34 0.43 0.42 0.47 0.40 0.54 0.58 0.69 2800 Hz 3150 Hz 3550 Hz 4000 Hz 2818.38 Hz 3162.28 Hz 3548.13 Hz 3981.07 Hz 0.16 0.15 0.15 0.23 0.62 0.80 0.97 1.13 0.87 1.06 1.25 1.45 4500 Hz 5000 Hz 5600 Hz 6300 Hz 4466.84 Hz 5011.87 Hz 5623.41 Hz 6309.57 Hz 0.33 0.26 0.35 0.31 1.47 1.92 2.07 2.35 1.79 2.29 2.46 2.97 7100 Hz 8000 Hz 8500 Hz 9000 Hz 7079.46 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz 0.62 0.54 0.64 0.77 3.07 3.27 3.62 3.98 3.67 4.07 4.54 4.94 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 0.76 0.73 0.74 0.88 4.12 4.52 5.19 5.33 5.60 5.93 6.63 7.03 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 0.73 1.20 1.04 1.15 5.81 6.40 6.57 7.60 7.52 8.32 9.06 10.01 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 1.28 1.25 1.43 1.69 7.82 8.91 9.16 10.32 10.73 11.55 12.48 13.76 19000 Hz 20000 Hz 18836.5 Hz 19952.6 Hz 1.70 1.98 10.74 12.15 14.76 16.11 BE171211.book Page 70 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 70 Table A.14 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1600 Hz 2000 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° –0.01 –0.02 –0.02 –0.03 –0.03 –0.03 0.02 0.01 0.01 0.00 0.03 0.06 0.01 0.00 0.01 –0.01 0.01 0.03 1000 Hz 0.00 0.01 0.02 0.04 0.02 0.03 1250 Hz 0.01 0.01 0.02 0.00 0.01 0.03 –0.03 –0.02 –0.01 –0.02 –0.02 –0.04 0.00 –0.01 –0.04 –0.10 –0.14 –0.21 2240 Hz 0.01 0.02 0.06 0.08 0.14 0.17 –0.01 –0.03 –0.07 –0.12 –0.16 –0.17 –0.03 –0.02 0.02 0.07 0.13 0.18 –0.01 –0.02 –0.06 –0.12 –0.21 –0.29 0.01 –0.01 –0.02 –0.01 0.06 0.18 30° 35° 40° 45° 50° 55° –0.02 –0.02 –0.03 –0.05 –0.08 –0.11 0.08 0.10 0.12 0.16 0.18 0.21 0.04 0.05 0.08 0.12 0.18 0.22 0.02 0.01 0.00 –0.01 –0.02 –0.02 0.06 0.09 0.15 0.22 0.29 0.34 –0.09 –0.17 –0.27 –0.39 –0.50 –0.56 –0.26 –0.29 –0.25 –0.17 –0.06 0.00 0.16 0.10 –0.02 –0.16 –0.26 –0.22 –0.16 –0.06 0.06 0.15 0.14 –0.01 0.17 0.09 –0.03 –0.12 –0.07 0.08 –0.34 –0.30 –0.18 –0.08 –0.09 –0.19 0.30 0.33 0.26 0.11 0.06 0.17 60° 65° 70° 75° 80° 85° –0.13 –0.13 –0.20 –0.21 –0.23 –0.27 0.20 0.18 0.19 0.15 0.10 0.08 0.27 0.32 0.38 0.41 0.42 0.42 –0.01 0.03 0.08 0.16 0.24 0.34 0.38 0.38 0.36 0.33 0.31 0.34 –0.54 –0.44 –0.29 –0.14 –0.05 –0.03 –0.04 –0.19 –0.39 –0.51 –0.43 –0.18 –0.07 0.08 0.08 –0.11 –0.37 –0.46 –0.22 –0.30 –0.15 0.03 –0.02 –0.31 0.16 0.06 –0.16 –0.26 –0.11 0.03 –0.25 –0.14 –0.05 –0.17 –0.44 –0.44 0.22 0.13 0.09 0.22 0.26 0.01 90° 95° 100° 105° 110° 115° –0.30 –0.32 –0.35 –0.40 –0.42 –0.41 0.01 –0.04 –0.09 –0.15 –0.19 –0.24 0.38 0.33 0.26 0.17 0.09 0.01 0.40 0.43 0.41 0.34 0.22 0.06 0.42 0.54 0.67 0.76 0.78 0.71 –0.06 –0.09 –0.06 0.04 0.17 0.26 0.06 0.18 0.15 0.06 0.04 0.17 –0.26 0.09 0.33 0.33 0.21 0.16 –0.54 –0.36 0.08 0.38 0.37 0.21 –0.14 –0.47 –0.43 0.06 0.48 0.48 –0.26 –0.33 –0.65 –0.61 –0.07 0.37 –0.20 –0.06 0.00 –0.27 –0.23 0.39 120° 125° 130° 135° 140° 145° –0.41 –0.40 –0.39 –0.36 –0.33 –0.32 –0.28 –0.30 –0.30 –0.30 –0.28 –0.25 –0.05 –0.09 –0.09 –0.08 –0.04 0.00 –0.09 –0.24 –0.33 –0.37 –0.37 –0.31 0.57 0.36 0.14 –0.04 –0.14 –0.18 0.26 0.14 –0.08 –0.34 –0.55 –0.66 0.34 0.40 0.28 0.01 –0.34 –0.62 0.27 0.45 0.50 0.31 –0.06 –0.45 0.17 0.33 0.48 0.43 0.10 –0.35 0.25 0.19 0.40 0.55 0.35 –0.14 0.32 0.06 0.02 0.24 0.26 –0.11 0.83 0.67 0.32 0.40 0.62 0.47 150° 155° 160° 165° 170° 175° –0.24 –0.24 –0.20 –0.22 –0.19 –0.19 –0.24 –0.21 –0.18 –0.15 –0.15 –0.14 0.05 0.11 0.15 0.18 0.20 0.22 –0.23 –0.12 –0.04 0.04 0.11 0.14 –0.13 –0.04 0.06 0.15 0.23 0.27 –0.67 –0.58 –0.45 –0.33 –0.22 –0.16 –0.73 –0.66 –0.48 –0.28 –0.12 –0.02 –0.68 –0.68 –0.50 –0.27 –0.07 0.06 –0.69 –0.77 –0.61 –0.34 –0.08 0.07 –0.66 –0.89 –0.75 –0.43 –0.11 0.09 –0.72 –1.13 –1.12 –0.79 –0.42 –0.16 –0.14 –0.77 –0.96 –0.65 –0.18 0.14 180° 185° 190° 195° 200° 205° –0.17 –0.17 –0.17 –0.20 –0.23 –0.27 –0.15 –0.15 –0.15 –0.18 –0.19 –0.21 0.21 0.21 0.20 0.16 0.13 0.08 0.14 0.13 0.08 0.03 –0.05 –0.15 0.29 0.26 0.21 0.12 0.01 –0.10 –0.15 –0.17 –0.25 –0.36 –0.49 –0.61 0.00 –0.05 –0.17 –0.35 –0.54 –0.70 0.08 0.03 –0.13 –0.34 –0.58 –0.73 0.12 0.04 –0.15 –0.41 –0.68 –0.80 0.14 0.04 –0.19 –0.52 –0.84 –0.90 –0.10 –0.21 –0.51 –0.90 –1.19 –1.11 0.24 0.09 –0.28 –0.75 –1.02 –0.74 210° 215° 220° 225° 230° 235° –0.28 –0.32 –0.33 –0.36 –0.39 –0.37 –0.24 –0.30 –0.30 –0.33 –0.32 –0.33 0.04 –0.03 –0.06 –0.10 –0.11 –0.10 –0.25 –0.31 –0.39 –0.40 –0.35 –0.26 –0.19 –0.23 –0.19 –0.07 0.13 0.36 –0.68 –0.65 –0.50 –0.27 –0.02 0.18 –0.73 –0.58 –0.27 0.08 0.34 0.42 –0.68 –0.41 0.01 0.37 0.53 0.45 –0.67 –0.26 0.21 0.50 0.51 0.31 –0.59 –0.03 0.44 0.59 0.40 0.18 –0.59 0.03 0.34 0.23 –0.02 0.04 –0.06 0.53 0.61 0.35 0.32 0.67 240° 245° 250° 255° 260° 265° –0.39 –0.42 –0.40 –0.35 –0.33 –0.30 –0.30 –0.24 –0.20 –0.18 –0.12 –0.05 –0.07 0.00 0.07 0.14 0.22 0.30 –0.13 0.03 0.17 0.30 0.37 0.39 0.59 0.74 0.80 0.78 0.69 0.55 0.27 0.25 0.12 –0.02 –0.12 –0.13 0.33 0.16 0.03 0.03 0.11 0.13 0.25 0.12 0.16 0.27 0.26 0.05 0.16 0.21 0.36 0.33 0.04 –0.38 0.24 0.45 0.41 0.00 –0.44 –0.45 0.31 0.31 –0.16 –0.64 –0.60 –0.33 0.77 0.28 –0.30 –0.28 –0.03 –0.14 270° 275° 280° 285° 290° 295° –0.24 –0.25 –0.19 –0.15 –0.13 –0.12 –0.01 0.05 0.08 0.11 0.13 0.16 0.34 0.37 0.37 0.35 0.32 0.27 0.37 0.30 0.20 0.12 0.05 0.00 0.41 0.31 0.26 0.27 0.30 0.31 –0.09 –0.04 –0.04 –0.12 –0.25 –0.40 0.02 –0.21 –0.43 –0.47 –0.36 –0.19 –0.27 –0.46 –0.39 –0.16 0.01 0.00 –0.52 –0.30 –0.06 –0.01 –0.16 –0.28 –0.13 0.00 –0.15 –0.27 –0.15 0.08 –0.33 –0.51 –0.45 –0.18 –0.04 –0.12 –0.25 –0.01 0.21 0.17 0.08 0.16 300° 305° 310° 315° 320° 325° –0.09 –0.08 –0.09 –0.05 –0.02 –0.04 0.16 0.15 0.16 0.14 0.10 0.07 0.23 0.17 0.13 0.09 0.05 0.02 –0.05 –0.05 –0.05 –0.04 –0.04 –0.02 0.32 0.30 0.25 0.19 0.14 0.08 –0.49 –0.52 –0.47 –0.37 –0.25 –0.14 –0.07 –0.04 –0.10 –0.20 –0.27 –0.30 –0.12 –0.23 –0.24 –0.16 –0.02 0.08 –0.20 –0.01 0.12 0.14 0.06 –0.03 0.16 0.09 –0.03 –0.03 0.06 0.16 –0.21 –0.16 –0.07 –0.07 –0.17 –0.29 0.21 0.12 0.00 0.03 0.18 0.28 330° 335° 340° 345° 350° 355° –0.05 0.00 –0.03 –0.01 –0.02 0.00 0.06 0.01 0.02 0.01 0.00 –0.01 0.00 –0.01 0.00 –0.01 –0.01 –0.02 –0.02 –0.02 –0.03 –0.03 –0.02 –0.02 0.04 0.02 0.00 –0.01 –0.01 –0.01 –0.07 –0.02 0.01 0.02 0.02 0.02 –0.27 –0.20 –0.14 –0.09 –0.04 –0.01 0.13 0.13 0.10 0.07 0.03 0.00 –0.11 –0.13 –0.10 –0.06 –0.02 0.01 0.22 0.22 0.18 0.12 0.08 0.05 –0.35 –0.31 –0.22 –0.13 –0.06 –0.01 0.27 0.17 0.08 0.02 –0.01 –0.01 BE171211.book Page 71 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 71 Table A.15 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 10000 Hz 10600 Hz 0° 5° 10° 15° 20° 25° –0.01 0.02 0.08 0.16 0.29 0.37 0.00 0.02 0.11 0.19 0.28 0.26 0.00 0.02 0.09 0.15 0.20 0.18 0.00 –0.05 –0.04 –0.05 –0.02 0.06 0.02 –0.06 –0.16 –0.32 –0.49 –0.47 –0.02 –0.05 0.00 0.06 0.14 0.09 –0.01 –0.07 –0.12 –0.18 –0.08 0.14 0.02 –0.02 –0.02 –0.05 0.01 0.10 0.03 –0.01 –0.03 –0.06 0.06 0.23 0.01 –0.06 –0.14 –0.23 –0.21 –0.29 –0.01 –0.04 –0.07 –0.11 –0.09 –0.02 –0.01 –0.03 –0.06 –0.15 –0.02 0.29 30° 35° 40° 45° 50° 55° 0.30 0.13 0.03 0.08 0.22 0.19 0.10 –0.06 –0.01 0.14 0.14 0.01 0.07 0.04 0.25 0.50 0.50 0.47 0.10 0.05 –0.05 0.07 0.14 –0.03 –0.16 0.06 –0.24 –0.53 –0.40 –0.57 0.06 0.40 0.42 –0.15 0.23 0.17 0.08 –0.20 –0.06 –0.07 –0.07 0.31 0.07 0.15 0.23 0.01 0.14 –0.12 0.17 0.12 0.19 0.23 0.24 0.33 –0.54 –0.37 –0.22 –0.19 –0.24 –0.23 –0.04 –0.12 –0.34 –0.31 –0.10 –0.07 0.31 0.26 0.33 0.14 0.00 0.30 60° 65° 70° 75° 80° 85° 0.05 0.10 0.22 0.13 0.06 0.15 0.02 0.09 0.11 0.14 0.09 0.09 0.59 0.53 0.29 0.35 0.62 0.68 0.08 0.17 0.33 0.56 0.09 –0.01 –0.39 –0.32 –0.26 –0.04 0.14 –0.02 –0.17 –0.06 –0.19 0.01 0.23 0.15 –0.09 0.12 –0.31 –0.08 –0.03 –0.03 0.32 0.00 0.08 –0.28 –0.08 0.11 0.05 0.29 0.24 0.09 –0.42 –0.08 0.01 –0.28 –0.11 0.11 –0.18 –0.72 –0.41 –0.12 –0.11 –0.23 0.12 –0.27 0.53 0.16 0.36 0.47 0.05 0.30 90° 95° 100° 105° 110° 115° –0.01 –0.33 –0.22 –0.13 –0.36 –0.19 –0.03 –0.19 –0.39 –0.46 –0.28 –0.41 0.67 0.58 0.17 –0.12 –0.04 0.09 0.16 0.48 0.66 0.05 –0.64 –0.49 –0.55 –0.01 –0.08 0.30 –0.77 –1.03 0.54 0.04 0.44 0.21 0.59 –0.16 0.08 0.11 –0.02 0.29 0.20 0.26 0.35 0.20 0.03 0.18 0.81 0.09 0.20 0.39 0.14 –0.03 0.53 0.44 –0.35 –0.24 0.02 –0.22 0.05 0.50 –0.64 –0.29 –0.03 0.19 –0.19 0.36 –0.03 0.22 0.47 0.36 0.28 0.89 120° 125° 130° 135° 140° 145° 0.51 0.88 0.56 0.23 0.36 0.47 –0.14 0.69 0.81 0.27 0.10 0.34 0.11 0.63 1.32 1.18 0.62 0.61 –0.09 0.27 0.69 0.94 0.64 0.36 –1.02 –0.32 0.31 0.63 0.56 –0.37 –0.71 –0.70 0.35 1.03 1.41 0.91 –0.97 –0.99 –0.70 0.70 0.97 0.91 –0.26 –0.70 –1.05 0.85 1.00 1.24 0.07 –1.21 –0.92 0.23 1.17 1.07 –0.26 –1.31 –1.07 –0.60 1.03 0.79 0.19 –0.79 –1.32 –0.85 0.91 0.75 1.20 0.02 –1.21 –0.27 1.41 1.32 150° 155° 160° 165° 170° 175° 0.05 –0.70 –1.13 –0.90 –0.38 0.01 0.11 –0.69 –1.32 –1.15 –0.54 –0.07 0.67 0.02 –0.83 –0.86 –0.17 0.42 0.44 0.06 –0.93 –1.44 –0.87 –0.13 –0.41 –0.30 –1.10 –1.75 –1.19 –0.40 0.05 0.03 –0.68 –1.73 –1.26 –0.31 –0.15 –0.12 –0.56 –1.93 –1.81 –0.68 0.07 –0.09 –0.20 –1.69 –1.86 –0.58 0.33 –0.47 –0.29 –1.59 –2.03 –0.72 0.46 –0.88 –0.58 –1.71 –2.49 –1.14 0.75 –0.78 –0.45 –1.57 –2.81 –1.36 1.33 0.01 –0.09 –0.66 –2.33 –1.20 180° 185° 190° 195° 200° 205° 0.13 –0.04 –0.47 –0.97 –1.11 –0.62 0.05 –0.18 –0.75 –1.36 –1.35 –0.54 0.61 0.32 –0.36 –0.93 –0.64 0.27 0.15 –0.16 –0.92 –1.44 –0.92 –0.11 –0.20 –0.76 –1.83 –2.21 –1.18 –0.30 –0.04 –0.65 –1.68 –1.59 –0.26 0.19 –0.27 –0.95 –2.12 –1.72 –0.42 –0.35 –0.12 –0.93 –2.24 –1.45 –0.17 –0.22 –0.20 –1.12 –2.39 –1.39 –0.28 –0.51 –0.55 –1.61 –2.82 –1.57 –0.53 –0.78 –0.69 –1.87 –3.12 –1.28 –0.58 –0.39 –0.48 –1.67 –2.43 –0.43 –0.45 0.39 210° 215° 220° 225° 230° 235° 0.12 0.47 0.31 0.22 0.61 0.81 0.25 0.32 –0.02 0.28 0.81 0.50 0.72 0.52 0.64 1.19 1.14 0.56 –0.04 –0.17 0.45 0.94 0.77 0.36 –0.30 0.13 0.77 0.43 0.12 –0.78 –0.04 0.98 1.20 1.07 0.11 –0.93 0.08 0.90 0.97 0.60 –1.10 –0.92 0.21 1.29 0.97 0.46 –1.28 –1.04 0.60 0.96 1.24 –0.50 –0.96 –1.47 0.68 0.70 0.97 –1.10 –1.39 –1.02 0.63 0.93 0.56 –1.19 –1.88 –0.88 0.99 1.47 0.68 –0.79 –1.68 0.14 240° 245° 250° 255° 260° 265° 0.36 –0.24 –0.31 –0.19 –0.29 –0.31 –0.23 –0.34 –0.34 –0.59 –0.44 –0.23 0.23 0.00 –0.15 –0.17 0.13 0.63 –0.16 –0.68 –1.02 –0.07 0.69 0.50 –1.41 –1.14 –0.30 0.19 –0.47 –0.33 –0.74 –0.04 0.38 0.31 0.21 0.18 –0.82 0.25 0.30 0.02 0.06 0.04 –0.40 0.06 0.42 –0.01 –0.03 0.04 –0.09 0.48 0.32 –0.29 0.08 0.25 –0.28 0.36 –0.22 –0.15 –0.12 –0.35 0.35 –0.14 –0.57 –0.02 –0.26 –0.49 0.77 0.36 0.33 0.02 0.15 –0.07 270° 275° 280° 285° 290° 295° –0.04 0.12 0.08 0.14 0.18 0.05 –0.03 0.13 0.10 0.07 0.01 0.02 0.68 0.59 0.39 0.26 0.34 0.58 0.00 –0.37 0.08 0.57 0.28 0.00 –0.41 0.16 –0.24 –0.35 –0.36 –0.37 0.34 0.19 0.18 –0.10 –0.19 –0.04 0.08 –0.13 –0.16 0.00 –0.31 –0.09 0.01 –0.11 –0.19 –0.49 –0.22 0.04 –0.06 –0.18 –0.53 –0.12 0.29 0.25 –0.41 –0.83 –0.39 0.16 –0.12 –0.32 –0.93 –0.45 0.05 –0.37 –0.27 –0.30 –0.04 0.11 –0.09 0.36 0.20 0.10 300° 305° 310° 315° 320° 325° –0.02 0.12 0.19 0.10 0.08 0.18 0.01 0.06 0.21 0.17 –0.04 –0.11 0.58 0.37 0.39 0.42 0.21 0.11 –0.01 0.05 0.18 –0.08 –0.37 –0.16 –0.52 –0.63 –0.36 –0.60 –0.57 –0.31 –0.18 0.11 0.02 –0.10 0.49 0.44 –0.02 0.34 0.00 –0.10 –0.15 –0.17 0.20 –0.13 –0.11 –0.13 0.16 0.09 0.01 0.07 0.25 0.22 0.13 0.02 –0.13 –0.14 –0.33 –0.32 –0.40 –0.43 –0.48 –0.29 –0.33 –0.42 –0.26 –0.17 0.28 0.11 0.06 0.14 0.27 0.14 330° 335° 340° 345° 350° 355° 0.32 0.36 0.30 0.21 0.12 0.07 0.00 0.14 0.19 0.14 0.07 0.01 0.16 0.23 0.22 0.16 0.08 0.05 0.17 0.32 0.30 0.22 0.12 0.04 –0.36 –0.43 –0.27 –0.08 0.03 0.04 0.16 0.15 0.15 0.09 0.03 0.01 0.10 0.14 0.03 0.00 0.04 0.07 0.06 0.04 –0.11 –0.16 –0.13 –0.08 0.02 0.09 0.00 –0.09 –0.07 –0.04 –0.41 –0.22 –0.17 –0.15 –0.06 0.00 –0.10 –0.11 –0.19 –0.17 –0.10 –0.06 0.27 0.22 –0.01 –0.09 –0.03 0.03 BE171211.book Page 72 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 72 Table A.16 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.01 –0.01 –0.04 –0.09 –0.10 0.05 0.00 –0.04 –0.05 –0.09 –0.24 –0.38 0.01 –0.02 –0.02 0.12 0.33 0.38 0.01 –0.01 –0.03 –0.17 –0.28 –0.23 –0.02 –0.04 0.05 0.28 0.45 0.49 –0.06 –0.04 –0.03 –0.21 –0.60 –0.38 –0.06 –0.10 –0.10 –0.14 0.01 –0.10 –0.16 –0.36 –0.29 –0.03 0.02 –0.11 –0.05 –0.11 0.08 0.06 0.34 0.34 0.03 0.01 –0.01 0.14 –0.04 –0.17 0.08 –0.03 0.04 0.12 0.23 0.14 30° 35° 40° 45° 50° 55° 0.04 0.01 0.20 0.22 0.12 0.00 –0.35 –0.44 –0.13 –0.17 –0.07 0.02 0.47 0.25 0.06 –0.06 0.41 0.38 –0.41 –0.26 –0.15 –0.14 –0.45 –0.28 0.56 0.36 0.31 0.34 0.25 0.14 –0.26 0.21 0.05 –0.09 0.14 0.05 –0.25 –0.59 –0.35 –0.06 –0.09 –0.26 –0.11 –0.05 –0.43 –0.42 –0.12 0.21 0.37 0.69 0.52 0.28 0.29 0.40 –0.23 0.00 0.03 –0.03 –0.03 –0.51 0.04 0.06 0.06 0.21 0.44 0.18 60° 65° 70° 75° 80° 85° –0.08 0.33 0.12 0.31 0.70 0.12 –0.13 –0.50 –0.12 –0.21 –0.25 0.42 0.15 0.37 0.39 0.57 0.33 0.07 –0.06 –0.53 –0.55 –0.25 –0.16 –0.22 0.13 0.73 0.40 0.08 0.46 0.40 –0.12 –0.31 0.07 –0.07 –0.54 0.20 –0.17 –0.35 –0.36 0.14 –0.32 –0.68 –0.61 0.18 –0.55 –0.51 –0.01 –0.25 0.76 0.32 0.78 0.71 0.67 0.55 0.11 0.20 0.03 –0.10 –0.43 –0.07 0.04 0.30 0.24 0.20 0.08 –0.07 90° 95° 100° 105° 110° 115° 0.09 –0.41 0.11 0.33 0.15 0.32 0.14 –0.27 –0.27 0.15 –0.32 –0.39 0.55 0.39 –0.44 0.30 0.92 0.43 –0.19 0.07 –0.27 –0.94 0.07 –0.39 0.26 0.25 0.70 –0.28 –0.29 1.00 –0.03 –0.14 –0.17 0.23 –0.43 0.23 0.53 –0.16 –0.14 0.08 –0.55 –0.85 –0.70 0.11 –0.85 –0.59 0.40 –0.73 0.65 0.68 0.66 0.98 0.37 0.86 –0.30 –0.08 –0.06 –0.25 –0.29 –0.07 0.14 0.02 –0.46 0.62 –0.28 0.57 120° 125° 130° 135° 140° 145° 0.77 0.45 –0.99 –0.58 0.78 1.63 0.86 0.79 –1.01 –1.34 –0.04 1.58 1.05 0.83 –1.17 –1.54 0.33 1.92 –0.50 0.22 –0.49 –1.58 –0.34 1.08 0.83 1.92 0.88 –1.33 –0.23 1.53 0.11 0.63 –0.13 –2.84 –1.36 1.11 –0.13 0.85 1.14 –1.34 –1.02 0.86 –0.50 –0.31 1.19 –0.68 –0.68 1.64 0.95 1.28 2.51 0.28 –2.09 1.44 –0.52 –0.88 1.18 1.04 –3.39 0.26 0.38 –0.01 1.04 0.96 –2.55 0.77 150° 155° 160° 165° 170° 175° 0.87 0.20 –0.54 –0.69 –2.44 –1.50 0.45 0.15 –0.92 –0.64 –2.74 –1.99 0.71 0.74 –0.98 –0.34 –2.10 –1.78 0.65 –0.04 –1.42 –0.99 –2.74 –2.35 1.66 0.87 –0.90 –0.38 –2.10 –2.26 1.57 –0.16 –0.71 –1.19 –2.40 –3.04 1.69 –0.29 –0.45 –1.42 –2.21 –3.73 1.50 –0.30 0.38 –0.90 –1.32 –3.47 2.07 0.70 0.80 –0.68 –0.85 –2.92 2.00 1.07 –0.12 –1.78 –1.18 –4.81 2.58 1.43 –0.30 –1.52 –0.07 –3.82 180° 185° 190° 195° 200° 205° –0.75 –2.03 –2.36 –0.68 –0.84 0.26 –1.16 –2.69 –2.67 –0.86 –1.23 0.22 –0.92 –2.39 –2.16 –0.76 –1.15 0.47 –1.50 –3.30 –2.89 –1.43 –1.30 –0.35 –1.24 –3.17 –1.76 –0.97 –0.49 0.50 –1.91 –3.80 –2.27 –1.69 –0.40 –0.49 –2.38 –4.03 –1.77 –1.54 –0.28 0.02 –2.70 –2.38 –0.92 –0.75 –0.12 1.40 –2.94 –3.51 –0.30 –0.73 0.05 2.18 –3.08 –4.16 –1.55 –1.79 –0.83 0.72 –3.57 –3.39 –0.75 –0.51 –0.43 1.97 210° 215° 220° 225° 230° 235° 0.60 1.61 –0.33 –1.54 –1.32 0.51 0.24 1.20 –0.80 –2.22 –1.47 0.41 0.90 1.15 –0.53 –2.02 –0.50 0.33 0.70 0.27 –1.64 –2.11 0.00 0.05 1.77 0.79 –1.41 –1.84 0.48 1.00 1.21 0.34 –1.50 –1.93 0.06 0.39 1.30 –0.09 –1.68 –1.12 0.78 0.28 1.41 –0.12 –2.68 –0.13 1.22 0.51 2.66 0.24 –1.64 1.67 1.74 0.35 1.31 –0.72 –2.40 1.03 0.61 –0.37 1.94 –0.44 –0.82 2.31 1.67 –0.01 240° 245° 250° 255° 260° 265° 0.37 –0.25 –0.26 –0.03 –0.13 –0.52 0.42 –0.49 –0.55 –0.08 –0.89 –0.72 –0.29 –0.37 0.30 –0.27 –0.68 –0.01 –0.80 –0.36 –0.30 –1.45 –0.68 –0.19 0.70 0.55 –0.47 –0.24 0.60 0.28 0.08 –0.10 –0.59 0.01 –0.20 –0.37 –0.25 –0.82 –0.29 0.12 0.15 –0.24 0.24 –0.17 0.53 0.22 0.20 0.85 –0.04 0.44 0.57 0.22 0.73 0.23 –0.77 –0.54 –0.44 –0.54 –0.53 –0.47 0.67 0.21 –0.02 0.69 0.38 0.43 270° 275° 280° 285° 290° 295° –0.47 –0.15 0.37 0.00 –0.01 –0.02 –0.13 0.20 –0.47 –0.47 –0.44 –0.62 0.34 –0.21 –0.01 0.29 0.23 0.17 –0.57 –0.61 –0.34 –0.45 –0.74 –0.71 0.19 0.35 0.28 –0.03 0.38 0.86 –0.14 0.04 –0.34 –0.05 0.21 –0.52 0.28 –0.50 –0.25 0.22 –0.36 –0.12 –0.18 0.43 0.48 –0.50 –0.46 0.07 0.31 0.52 0.49 0.51 0.89 0.38 –0.72 –0.19 –0.76 –0.25 –0.32 0.12 0.44 –0.02 0.36 0.01 0.34 0.36 300° 305° 310° 315° 320° 325° –0.31 –0.08 –0.03 –0.12 0.14 –0.10 –0.35 –0.18 –0.19 –0.29 –0.21 –0.50 –0.12 0.19 0.27 –0.16 –0.12 0.17 –0.10 –0.39 –0.60 –0.31 –0.19 –0.26 –0.01 0.01 0.35 0.32 0.21 0.33 –0.10 0.11 0.13 –0.02 0.14 0.19 –0.09 –0.13 –0.06 0.00 –0.17 –0.38 –0.09 0.17 0.12 –0.34 –0.22 –0.18 0.87 0.43 0.38 0.64 0.85 0.77 –0.28 –0.57 –0.29 –0.12 –0.21 –0.16 0.08 0.19 0.30 –0.07 –0.04 0.08 330° 335° 340° 345° 350° 355° 0.00 –0.04 –0.18 –0.14 –0.07 –0.06 –0.43 –0.45 –0.36 –0.09 0.05 0.06 0.40 0.41 0.29 0.07 –0.05 –0.06 –0.55 –0.28 –0.27 –0.16 –0.01 0.00 0.60 0.44 0.44 0.27 0.06 –0.01 –0.12 –0.27 –0.44 –0.08 0.10 0.06 –0.20 –0.02 0.07 –0.01 0.05 0.12 –0.04 0.03 –0.09 –0.12 –0.04 –0.18 0.80 0.66 0.49 0.37 0.10 0.00 –0.32 –0.25 –0.12 0.05 –0.11 –0.02 0.00 –0.07 0.13 0.02 0.04 –0.05 BE171211.book Page 73 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 73 Table A.17 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 0° 5° 10° 15° 20° 25° 0.02 0.00 –0.01 –0.01 –0.01 –0.03 0.00 –0.01 0.01 0.02 0.03 0.02 0.00 –0.01 0.00 0.00 –0.01 –0.02 0.00 0.02 0.02 0.03 0.01 0.00 30° 35° 40° 45° 50° 55° –0.01 –0.01 –0.05 –0.02 –0.05 –0.07 0.06 0.06 0.12 0.14 0.17 0.18 0.00 0.00 0.04 0.08 0.12 0.18 60° 65° 70° 75° 80° 85° –0.12 –0.10 –0.12 –0.15 –0.18 –0.21 0.19 0.19 0.18 0.15 0.14 0.09 90° 95° 100° 105° 110° 115° –0.23 –0.31 –0.32 –0.33 –0.36 –0.41 120° 125° 130° 135° 140° 145° 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 0.00 0.02 0.01 0.01 0.03 0.03 0.00 0.01 0.01 0.00 –0.01 –0.06 0.00 –0.01 –0.02 –0.06 –0.11 –0.20 0.00 0.01 0.04 0.07 0.13 0.17 0.00 –0.01 –0.04 –0.11 –0.18 –0.26 0.00 –0.03 –0.04 –0.07 –0.08 –0.10 0.07 0.10 0.17 0.24 0.30 0.34 –0.10 –0.21 –0.30 –0.42 –0.53 –0.58 –0.26 –0.30 –0.28 –0.19 –0.09 –0.01 0.20 0.16 0.06 –0.06 –0.17 –0.16 0.24 0.31 0.36 0.40 0.43 0.42 –0.09 –0.07 0.00 0.10 0.20 0.32 0.34 0.32 0.27 0.23 0.22 0.27 –0.55 –0.44 –0.28 –0.15 –0.09 –0.11 –0.04 –0.18 –0.39 –0.54 –0.49 –0.29 0.03 –0.01 –0.08 –0.14 –0.20 –0.22 0.39 0.34 0.27 0.19 0.10 0.02 0.39 0.42 0.41 0.33 0.22 0.06 0.39 0.55 0.72 0.83 0.85 0.76 –0.17 –0.21 –0.13 0.04 0.23 0.36 –0.39 –0.37 –0.39 –0.38 –0.32 –0.32 –0.26 –0.29 –0.30 –0.28 –0.28 –0.25 –0.04 –0.09 –0.10 –0.08 –0.05 –0.01 –0.10 –0.25 –0.34 –0.39 –0.39 –0.32 0.59 0.35 0.11 –0.09 –0.20 –0.22 150° 155° 160° 165° 170° 175° –0.27 –0.25 –0.23 –0.20 –0.21 –0.17 –0.23 –0.20 –0.16 –0.13 –0.12 –0.12 0.04 0.10 0.15 0.19 0.21 0.23 –0.24 –0.13 –0.05 0.02 0.10 0.13 180° 185° 190° 195° 200° 205° –0.17 –0.18 –0.20 –0.23 –0.23 –0.26 –0.11 –0.11 –0.12 –0.12 –0.16 –0.18 0.24 0.23 0.22 0.19 0.15 0.11 210° 215° 220° 225° 230° 235° –0.29 –0.31 –0.34 –0.39 –0.39 –0.42 –0.20 –0.23 –0.26 –0.27 –0.28 –0.27 240° 245° 250° 255° 260° 265° –0.42 –0.42 –0.40 –0.38 –0.35 –0.33 270° 275° 280° 285° 290° 295° 2800 Hz 3150 Hz 3550 Hz 0.00 0.02 0.08 0.13 0.21 0.25 0.00 –0.02 –0.05 –0.13 –0.22 –0.31 0.00 0.01 0.02 0.03 0.08 0.16 –0.26 –0.18 –0.03 0.13 0.18 0.04 0.26 0.13 –0.06 –0.25 –0.26 –0.02 –0.32 –0.24 –0.04 0.12 0.08 –0.21 0.26 0.23 0.09 –0.11 –0.14 0.13 –0.04 0.10 0.09 –0.09 –0.36 –0.47 –0.17 –0.26 –0.10 0.08 0.01 –0.32 0.24 0.24 –0.05 –0.23 0.00 0.20 –0.51 –0.41 –0.03 0.03 –0.31 –0.37 0.35 0.18 –0.22 –0.13 0.29 0.16 –0.10 –0.04 –0.09 –0.11 0.02 0.27 –0.29 0.00 0.14 0.07 –0.01 0.15 –0.58 –0.45 –0.08 0.12 0.03 –0.07 –0.09 –0.60 –0.56 –0.02 0.25 0.06 –0.04 –0.11 –0.72 –0.87 –0.24 0.13 –0.21 0.14 0.26 –0.43 –0.65 0.12 0.36 0.23 –0.03 –0.34 –0.59 –0.73 0.52 0.60 0.45 0.08 –0.35 –0.69 0.50 0.77 0.76 0.46 –0.04 –0.52 0.16 0.59 0.85 0.73 0.23 –0.43 –0.05 0.34 0.87 1.00 0.61 –0.13 –0.11 –0.21 0.33 0.88 0.83 0.12 0.44 0.09 0.18 0.95 1.33 0.84 –0.16 –0.07 0.05 0.15 0.23 0.29 –0.73 –0.64 –0.49 –0.34 –0.23 –0.15 –0.83 –0.74 –0.55 –0.33 –0.15 –0.04 –0.79 –0.76 –0.55 –0.29 –0.06 0.08 –0.91 –1.00 –0.76 –0.43 –0.14 0.04 –0.85 –1.13 –0.94 –0.54 –0.17 0.08 –0.90 –1.52 –1.42 –0.91 –0.42 –0.10 –0.29 –1.27 –1.42 –0.89 –0.29 0.10 0.14 0.13 0.11 0.05 –0.02 –0.12 0.31 0.30 0.25 0.17 0.06 –0.06 –0.12 –0.14 –0.22 –0.34 –0.49 –0.65 0.00 –0.04 –0.16 –0.35 –0.57 –0.79 0.12 0.08 –0.07 –0.30 –0.57 –0.80 0.10 0.04 –0.15 –0.45 –0.78 –1.01 0.16 0.08 –0.16 –0.54 –0.96 –1.17 0.00 –0.10 –0.41 –0.89 –1.39 –1.51 0.23 0.11 –0.29 –0.90 –1.43 –1.27 0.07 0.01 –0.04 –0.07 –0.09 –0.08 –0.23 –0.33 –0.39 –0.42 –0.38 –0.27 –0.17 –0.23 –0.22 –0.12 0.08 0.34 –0.77 –0.78 –0.64 –0.38 –0.04 0.25 –0.89 –0.76 –0.40 0.07 0.48 0.69 –0.83 –0.54 –0.01 0.55 0.89 0.90 –0.93 –0.43 0.26 0.81 0.97 0.72 –0.88 –0.11 0.72 1.16 1.02 0.46 –0.90 0.13 0.92 1.04 0.49 –0.14 –0.22 0.93 1.46 1.12 0.33 0.12 –0.26 –0.23 –0.19 –0.18 –0.09 –0.01 –0.04 0.02 0.10 0.17 0.28 0.37 –0.14 0.04 0.21 0.36 0.43 0.47 0.60 0.80 0.92 0.92 0.83 0.67 0.43 0.46 0.33 0.12 –0.09 –0.20 0.64 0.39 0.09 –0.09 –0.09 0.00 0.61 0.21 0.02 0.09 0.19 0.08 0.26 –0.02 0.05 0.14 –0.03 –0.40 0.01 0.08 0.24 0.00 –0.49 –0.54 –0.15 0.10 –0.19 –0.80 –0.69 –0.09 0.39 0.09 –0.61 –0.40 0.26 0.15 –0.29 –0.25 –0.23 –0.19 –0.18 –0.12 0.04 0.07 0.13 0.15 0.20 0.18 0.43 0.46 0.47 0.45 0.42 0.36 0.45 0.38 0.28 0.18 0.08 0.00 0.49 0.34 0.25 0.24 0.27 0.31 –0.20 –0.14 –0.10 –0.12 –0.22 –0.36 –0.02 –0.19 –0.40 –0.49 –0.40 –0.20 –0.23 –0.45 –0.37 –0.08 0.15 0.17 –0.54 –0.28 0.05 0.11 –0.08 –0.26 –0.07 0.20 0.02 –0.22 –0.06 0.26 0.00 –0.35 –0.31 0.08 0.11 –0.19 –0.16 0.19 0.39 0.07 –0.04 0.18 300° 305° 310° 315° 320° 325° –0.13 –0.07 –0.09 –0.05 –0.07 –0.07 0.21 0.19 0.19 0.16 0.15 0.12 0.32 0.25 0.20 0.14 0.10 0.07 –0.05 –0.08 –0.07 –0.05 –0.05 –0.02 0.33 0.34 0.30 0.26 0.20 0.14 –0.46 –0.51 –0.47 –0.38 –0.27 –0.16 –0.04 0.00 –0.04 –0.15 –0.24 –0.28 0.03 –0.14 –0.18 –0.09 0.05 0.16 –0.19 0.02 0.20 0.20 0.08 –0.05 0.34 0.14 –0.05 –0.07 0.04 0.17 –0.32 –0.19 –0.02 –0.03 –0.16 –0.28 0.23 0.02 –0.11 0.02 0.25 0.37 330° 335° 340° 345° 350° 355° –0.03 –0.04 –0.04 –0.03 –0.01 –0.04 0.08 0.07 0.06 0.03 0.04 0.02 0.04 0.03 0.02 0.02 0.02 0.00 –0.02 –0.02 –0.02 –0.01 –0.02 –0.01 0.10 0.05 0.03 0.01 0.01 0.00 –0.09 –0.03 0.00 0.01 0.02 0.01 –0.26 –0.21 –0.14 –0.09 –0.04 –0.02 0.20 0.20 0.15 0.10 0.05 0.02 –0.13 –0.15 –0.11 –0.06 –0.01 0.01 0.22 0.20 0.15 0.09 0.05 0.02 –0.31 –0.25 –0.16 –0.08 –0.03 0.00 0.34 0.20 0.09 0.01 –0.01 –0.01 BE171211.book Page 74 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 74 Table A.18 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 10000 Hz 10600 Hz 0° 5° 10° 15° 20° 25° 0.00 0.01 0.10 0.19 0.29 0.35 –0.01 0.03 0.13 0.22 0.26 0.16 0.00 0.04 0.11 0.17 0.22 0.14 0.00 0.00 0.12 0.31 0.51 0.58 0.00 –0.02 –0.05 –0.13 –0.25 –0.31 –0.01 0.01 0.08 0.19 0.30 0.28 0.00 –0.03 –0.01 –0.02 –0.07 –0.08 0.00 –0.02 –0.02 –0.05 –0.13 –0.19 0.00 0.02 0.02 0.00 0.06 0.19 0.00 –0.08 –0.19 –0.30 –0.23 –0.13 0.00 –0.02 –0.12 –0.26 –0.16 0.07 0.01 –0.06 –0.16 –0.27 –0.17 0.09 30° 35° 40° 45° 50° 55° 0.28 0.07 –0.04 0.12 0.34 0.23 –0.11 –0.31 –0.09 0.29 0.23 –0.13 –0.01 0.04 0.47 0.68 0.29 0.29 0.33 –0.03 0.07 0.23 –0.13 0.10 –0.28 –0.44 –0.65 –0.36 –0.42 –0.70 0.10 0.18 0.30 –0.05 0.13 0.20 0.05 –0.10 –0.31 0.08 –0.26 0.11 –0.11 0.00 0.06 –0.02 –0.08 0.02 0.16 –0.03 0.02 0.40 0.42 0.20 –0.35 –0.28 –0.01 –0.40 –0.37 –0.08 –0.17 –0.28 –0.38 –0.39 –0.14 –0.49 –0.06 0.08 0.20 0.04 –0.06 0.21 60° 65° 70° 75° 80° 85° –0.10 0.02 0.33 0.08 –0.36 0.00 –0.03 0.23 –0.12 –0.11 0.25 –0.32 0.77 0.48 0.28 0.62 0.42 0.70 0.44 0.05 0.73 0.53 0.17 0.22 –0.38 –0.66 –0.17 –0.59 0.21 –0.22 0.05 –0.14 –0.03 –0.06 0.25 0.10 –0.33 0.06 –0.35 –0.22 0.09 –0.31 –0.13 –0.24 –0.01 –0.54 –0.33 0.15 0.45 0.05 0.19 0.28 –0.38 –0.17 –0.22 0.22 –0.23 –0.16 –0.01 –0.36 –0.15 –0.42 –0.02 –0.41 –0.23 –0.36 0.03 0.34 0.08 0.34 –0.26 0.02 90° 95° 100° 105° 110° 115° 0.29 –0.15 –0.01 0.27 –0.49 –0.71 –0.45 0.24 –0.25 –0.25 0.11 –0.80 0.65 –0.07 0.55 0.38 0.18 0.69 0.17 0.67 0.14 0.28 0.15 –0.05 –0.22 –0.50 –0.14 –0.60 –0.10 –0.56 0.62 0.18 0.29 0.11 –0.22 0.46 –0.21 0.41 –0.21 0.12 –0.15 –0.53 –0.03 –0.19 0.20 0.05 –0.03 –0.23 0.44 0.40 0.25 0.11 0.54 –0.12 –0.51 –0.24 0.02 0.21 –0.11 –0.03 –0.21 –0.32 –0.15 0.02 –0.22 0.19 –0.54 –0.05 0.17 0.63 0.67 0.13 120° 125° 130° 135° 140° 145° 0.24 0.43 –0.03 0.43 1.28 1.27 –0.70 0.33 0.15 –0.13 0.74 1.25 –0.52 0.04 1.13 0.50 0.74 1.89 0.54 –0.70 0.38 0.76 0.16 1.40 –0.58 –0.61 –1.15 0.40 –0.24 –0.08 –0.10 0.19 –0.95 0.31 1.07 0.02 0.22 –0.60 –0.33 –1.44 0.80 0.11 –0.24 0.08 –0.42 –1.14 0.35 0.69 –0.11 0.50 –0.40 –0.55 –0.13 1.14 –0.24 –0.24 –0.34 –0.57 –0.99 1.10 –0.71 –0.28 0.01 –0.90 –1.27 0.92 0.02 0.09 0.48 –0.51 –0.80 1.02 150° 155° 160° 165° 170° 175° 0.24 –1.15 –1.74 –1.27 –0.52 0.01 0.57 –0.98 –2.10 –1.78 –0.90 –0.25 1.75 0.12 –1.74 –1.77 –0.63 0.25 2.02 0.72 –1.72 –2.66 –1.40 –0.20 1.39 0.91 –1.48 –3.47 –2.53 –1.11 1.53 1.84 –0.33 –2.84 –2.23 –0.76 0.45 1.74 0.10 –3.35 –3.27 –1.32 0.14 1.75 0.65 –3.02 –3.67 –1.49 0.10 1.80 1.14 –2.62 –3.77 –1.39 –0.20 1.32 1.23 –2.67 –4.54 –1.89 –0.09 0.96 1.40 –2.34 –5.07 –2.32 0.79 1.02 1.99 –1.36 –4.90 –2.26 180° 185° 190° 195° 200° 205° 0.18 0.02 –0.51 –1.27 –1.79 –1.20 –0.04 –0.24 –0.89 –1.77 –2.08 –0.95 0.54 0.29 –0.51 –1.55 –1.55 0.22 0.27 0.01 –0.95 –2.24 –1.82 0.38 –0.55 –0.91 –2.14 –3.34 –1.99 0.40 –0.23 –0.74 –2.34 –3.44 –0.68 1.89 –0.64 –1.33 –3.19 –3.35 0.07 1.90 –0.66 –1.38 –3.50 –3.12 0.75 2.26 –0.50 –1.33 –3.56 –2.60 1.23 2.33 –0.89 –1.80 –4.09 –2.64 1.38 1.69 –1.14 –2.06 –4.78 –2.46 1.37 1.24 –0.97 –2.05 –4.65 –1.52 2.05 1.40 210° 215° 220° 225° 230° 235° 0.24 1.35 1.46 0.61 0.01 0.40 0.70 1.49 0.99 –0.01 0.08 0.22 1.83 1.98 0.85 0.49 0.92 0.00 1.65 1.11 0.10 0.84 0.58 –0.50 1.18 0.12 –0.02 0.33 –1.07 –0.71 1.99 0.64 0.84 0.02 –0.49 –0.14 0.99 0.30 0.32 –0.98 –0.63 –0.55 0.78 0.56 0.07 –0.63 –0.85 0.48 0.49 0.71 –0.13 –0.46 –0.93 0.82 –0.27 0.72 –0.80 –0.83 –0.68 0.06 –0.14 0.80 –1.10 –1.83 0.11 –0.16 0.89 0.61 –1.33 –1.17 0.60 0.47 240° 245° 250° 255° 260° 265° 0.27 –0.65 –0.43 0.31 –0.01 –0.14 –0.73 –0.79 0.13 –0.29 –0.31 0.28 –0.32 0.74 0.07 0.37 0.68 0.29 0.41 –0.44 0.02 0.59 0.58 0.54 –0.89 –0.74 0.37 –0.16 –0.34 –0.92 –0.01 0.93 0.07 0.12 –0.02 0.77 0.46 –0.16 –0.03 –0.23 0.37 0.27 –0.04 0.41 –0.57 0.51 0.37 0.04 0.24 0.10 0.14 0.62 0.32 0.48 0.50 –1.03 0.11 0.38 –0.14 0.05 –0.54 –0.65 0.06 –0.51 –0.02 –0.47 –0.67 0.16 0.63 0.56 0.23 –0.27 270° 275° 280° 285° 290° 295° 0.36 0.15 –0.14 0.15 0.22 –0.05 –0.14 –0.07 0.18 –0.25 –0.10 0.37 0.79 0.41 0.31 0.73 0.49 0.63 –0.33 0.31 0.59 0.66 0.50 –0.19 –0.02 0.02 0.13 –0.68 –0.01 –0.32 0.61 0.07 0.47 0.05 0.08 –0.10 0.01 –0.12 0.21 –0.15 –0.25 –0.01 0.15 0.50 –0.23 –0.37 0.07 0.02 0.82 –0.30 –0.23 0.34 0.33 0.55 –0.67 –0.30 –0.05 –0.17 0.18 0.33 –0.37 –0.47 –0.60 0.03 –0.07 –0.67 –0.36 –0.56 0.32 0.46 –0.08 0.15 300° 305° 310° 315° 320° 325° 0.02 0.38 0.48 0.17 –0.03 0.08 0.10 –0.09 0.33 0.41 0.01 –0.32 0.84 0.28 0.19 0.67 0.61 0.29 0.49 0.50 0.18 0.09 –0.18 –0.08 –0.38 –0.83 –0.31 –0.37 –0.48 –0.22 0.21 –0.04 0.00 0.18 0.74 0.54 –0.09 0.46 0.05 0.25 –0.46 –0.31 0.34 0.36 –0.13 –0.19 0.45 0.23 0.74 –0.10 0.51 0.58 0.28 0.21 –0.58 0.16 –0.30 –0.35 –0.07 0.09 –0.16 –0.62 –0.04 –0.02 –0.61 –0.48 0.31 0.49 –0.04 –0.08 0.31 0.15 330° 335° 340° 345° 350° 355° 0.31 0.43 0.39 0.28 0.16 0.08 –0.20 0.09 0.23 0.22 0.13 0.04 0.16 0.21 0.23 0.20 0.11 0.07 0.40 0.65 0.54 0.35 0.16 0.06 –0.37 –0.65 –0.57 –0.28 –0.07 0.02 0.31 0.41 0.40 0.22 0.04 –0.01 0.30 0.25 0.03 –0.02 0.03 0.07 0.07 0.09 –0.04 –0.13 –0.11 –0.05 0.22 0.53 0.50 0.21 0.01 –0.01 –0.42 –0.60 –0.32 –0.09 0.03 0.07 0.04 0.15 –0.10 –0.29 –0.23 –0.10 0.02 0.25 0.14 0.05 0.10 0.10 BE171211.book Page 75 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 75 Table A.19 Influence of Hand-held Analyzer body on directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 0.00 0.06 0.16 0.13 0.02 0.01 –0.02 –0.05 –0.07 –0.10 –0.29 0.01 –0.03 –0.14 –0.22 –0.04 0.06 0.01 0.00 0.02 0.15 0.11 0.01 0.01 0.01 –0.01 0.04 0.21 0.06 0.05 0.10 0.10 –0.08 –0.33 –0.31 0.00 0.01 –0.14 –0.20 –0.29 –0.34 –0.01 –0.11 –0.06 –0.21 –0.16 –0.08 –0.09 0.00 –0.08 0.13 –0.03 0.31 –0.01 –0.12 –0.12 –0.18 –0.12 –0.31 0.02 –0.10 –0.07 –0.03 –0.06 –0.05 30° 35° 40° 45° 50° 55° –0.01 0.01 –0.06 0.15 0.08 –0.24 –0.25 –0.30 –0.28 –0.25 –0.40 –0.11 –0.11 0.13 –0.12 –0.07 0.18 –0.12 –0.20 –0.28 –0.51 –0.15 –0.33 –0.27 0.28 0.31 0.46 0.24 –0.03 0.02 –0.15 –0.12 –0.11 –0.22 0.31 –0.06 –0.29 –0.65 –0.41 –0.20 –0.26 –0.64 –0.36 –0.41 –0.47 –0.36 –0.48 0.52 0.13 0.23 0.19 0.03 –0.52 –0.45 –0.49 –0.37 –0.25 –0.28 –0.22 –0.63 –0.28 –0.26 –0.49 –0.45 –0.16 –0.32 60° 65° 70° 75° 80° 85° 0.02 –0.06 0.14 –0.03 0.57 –0.10 –0.25 –0.37 –0.42 –0.31 –0.48 0.15 0.00 0.25 0.27 0.13 0.12 –0.12 –0.28 –0.59 –0.55 –0.15 –0.21 –0.19 0.04 0.37 0.24 0.01 0.38 0.44 –0.06 –0.40 –0.49 –0.45 –0.57 0.04 –0.65 –0.59 –0.55 –0.69 –0.83 –0.80 –0.45 –0.81 –0.48 –0.86 –0.28 0.08 0.16 –0.06 –0.60 –0.11 –0.02 0.16 –0.39 –0.07 –0.24 –0.71 –0.59 –0.34 –0.46 –0.69 –0.44 –0.26 –0.65 –0.41 90° 95° 100° 105° 110° 115° 0.19 –0.19 –0.23 –0.31 –0.10 –0.03 –0.38 –0.74 –0.11 0.05 0.23 0.00 0.12 0.13 –1.10 –0.53 –0.18 –0.18 –0.39 –0.39 –0.17 –0.24 0.21 0.74 0.29 0.28 0.68 –0.62 –0.34 0.53 –0.25 –0.15 –0.31 0.05 –0.01 0.00 –0.18 –0.77 –0.59 –0.81 –1.50 –1.53 –0.59 0.13 0.53 –0.29 0.61 0.91 0.13 –0.67 –0.45 –0.29 –0.50 –0.29 –0.10 –0.72 –0.16 –0.06 –0.37 –1.03 –0.81 –0.74 –0.67 –0.26 –0.73 –0.22 120° 125° 130° 135° 140° 145° 0.46 –0.13 –0.07 –0.32 –0.86 0.37 –0.21 –1.11 –0.38 0.06 –1.17 –0.86 –0.07 0.28 0.39 0.09 –1.21 –0.90 0.05 0.15 –0.75 –0.66 –1.03 –1.62 0.30 0.11 –0.84 0.53 0.71 –0.51 0.85 0.16 0.01 0.30 0.22 –1.23 –0.36 –0.39 –0.22 –0.78 –0.75 –2.22 0.32 –0.05 –0.30 –1.77 –1.18 –0.88 –0.38 1.34 0.53 –0.15 0.77 0.01 0.16 0.76 –0.81 –0.11 0.48 0.18 –1.45 0.22 –0.01 –0.44 –0.90 –1.67 150° 155° 160° 165° 170° 175° 1.06 0.56 1.87 –1.12 –5.37 –2.54 1.34 –0.09 1.93 –0.77 –6.32 –3.12 1.52 0.09 1.95 0.23 –6.15 –3.58 0.89 0.09 1.47 0.35 –5.74 –4.38 0.98 0.94 1.81 1.42 –4.80 –4.24 –0.03 0.89 0.89 1.03 –4.57 –5.03 –0.73 1.28 0.11 0.96 –4.96 –5.29 0.25 2.30 0.37 2.18 –5.87 –4.55 0.49 1.96 0.63 1.69 –4.30 –4.75 –1.53 0.56 0.39 1.76 –2.83 –7.53 –2.07 0.39 0.81 1.50 –2.17 –7.07 180° 185° 190° 195° 200° 205° –1.10 –2.28 –5.09 –1.08 2.10 1.02 –1.40 –2.74 –5.66 –0.80 2.04 0.34 –1.49 –2.88 –5.44 0.08 2.18 0.10 –2.01 –3.54 –5.49 –0.05 1.38 –0.46 –1.93 –3.66 –5.29 0.77 1.38 0.20 –2.62 –4.62 –5.15 0.37 0.36 0.18 –2.74 –4.44 –5.27 0.17 –0.18 0.61 –1.69 –4.67 –2.88 0.63 0.53 1.00 –2.26 –5.84 –3.47 1.38 0.63 1.69 –2.95 –5.59 –4.84 0.74 0.08 0.65 –3.46 –6.91 –2.93 1.59 1.56 0.78 210° 215° 220° 225° 230° 235° 0.84 –0.31 –1.40 –0.50 0.34 0.28 0.79 –1.23 –1.96 0.33 0.16 –0.82 0.53 –1.80 –1.72 0.76 0.78 –0.33 –0.15 –1.71 –0.84 0.15 0.03 –1.13 –0.16 –0.50 0.94 0.85 –0.74 –1.21 –0.71 –0.96 0.40 0.21 –0.86 0.18 –0.78 –1.48 –0.11 –0.61 –1.26 0.60 0.73 0.45 0.47 0.03 0.02 2.23 0.41 0.03 1.69 0.12 1.87 1.17 –0.44 –0.91 0.19 –1.66 0.16 0.11 –1.44 –0.30 –0.16 –0.93 1.49 0.99 240° 245° 250° 255° 260° 265° –0.33 0.19 –0.34 0.09 –0.28 –0.09 –0.83 0.09 0.53 0.24 –0.19 –0.70 –0.30 –0.27 0.55 –0.15 –0.99 –0.25 0.30 1.39 0.47 –0.78 –0.59 0.32 0.69 0.88 –0.97 –0.30 1.07 0.89 1.15 –0.09 –0.85 –0.21 0.42 –0.46 0.68 –1.41 –0.81 0.00 –0.29 –0.36 0.32 –0.58 –0.25 –0.29 0.29 0.65 –1.23 0.20 0.16 0.15 –0.05 0.89 –0.81 –0.13 0.06 0.00 0.09 –0.34 –1.02 0.41 0.27 0.72 0.69 0.16 270° 275° 280° 285° 290° 295° –0.31 0.59 0.85 –0.17 0.00 0.39 0.15 0.65 –0.65 –0.45 0.05 0.04 0.91 –0.18 –0.13 0.64 0.55 –0.06 –0.32 –0.48 0.25 0.11 –1.08 –0.37 –0.31 0.58 0.77 –0.44 0.70 1.05 –0.08 0.60 –0.72 0.01 0.16 –0.51 0.36 –0.63 –0.38 0.11 –0.28 –0.26 –0.66 –0.31 –0.12 –0.30 0.06 0.18 0.25 0.60 0.51 0.26 0.53 0.81 0.02 0.43 –0.46 0.21 0.27 0.56 0.75 0.20 0.59 0.44 0.08 0.05 300° 305° 310° 315° 320° 325° 0.40 –0.26 0.03 0.20 0.22 0.32 –0.27 –0.12 –0.06 0.27 0.17 –0.41 0.10 0.47 0.58 –0.16 –0.49 0.29 0.43 –0.19 –0.96 –0.04 0.15 0.00 –0.02 –0.20 0.65 0.52 0.39 0.04 0.05 0.63 0.12 –0.10 0.20 0.48 0.03 –0.22 –0.22 0.11 –0.02 –0.49 0.19 0.43 0.17 –0.32 –0.13 –0.10 0.48 0.52 0.45 0.47 0.68 0.57 0.01 –0.29 0.12 0.20 0.05 0.17 0.24 0.64 0.49 0.29 0.21 0.28 330° 335° 340° 345° 350° 355° 0.35 0.06 –0.11 0.04 0.06 0.00 –0.46 –0.33 0.06 0.08 0.03 0.05 0.35 0.58 0.43 0.20 0.07 0.01 –0.21 –0.49 –0.39 –0.11 –0.01 0.02 0.48 0.69 0.76 0.36 0.06 –0.01 0.06 –0.26 –0.55 –0.34 –0.12 –0.02 –0.34 –0.03 0.05 0.05 0.10 0.06 0.18 0.19 –0.12 –0.04 0.12 0.07 0.43 0.49 0.09 0.12 0.19 0.05 –0.01 –0.01 –0.02 0.02 0.01 0.05 0.19 0.34 0.44 0.28 0.16 0.20 BE171211.book Page 76 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 76 Table A.20 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1250 Hz 1600 Hz 2000 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° –0.01 –0.02 –0.01 –0.03 –0.02 –0.02 0.02 0.01 0.01 0.00 0.04 0.06 0.01 0.00 0.00 –0.02 0.00 0.02 1000 Hz 0.00 0.00 0.00 0.02 0.01 0.00 0.01 0.00 0.00 –0.01 –0.01 0.00 –0.03 –0.03 –0.02 –0.03 –0.04 –0.08 0.00 –0.01 –0.04 –0.10 –0.16 –0.24 2240 Hz 0.01 0.02 0.04 0.07 0.11 0.14 –0.01 –0.04 –0.08 –0.15 –0.21 –0.24 –0.03 –0.02 –0.01 0.03 0.06 0.07 –0.01 –0.03 –0.08 –0.16 –0.27 –0.39 0.01 –0.01 –0.03 –0.04 0.01 0.09 30° 35° 40° 45° 50° 55° –0.01 –0.01 –0.03 –0.05 –0.08 –0.13 0.08 0.09 0.11 0.14 0.15 0.18 0.02 0.03 0.05 0.09 0.13 0.17 –0.01 –0.02 –0.04 –0.06 –0.08 –0.09 0.01 0.04 0.08 0.14 0.20 0.23 –0.14 –0.25 –0.37 –0.52 –0.65 –0.73 –0.31 –0.35 –0.33 –0.27 –0.20 –0.17 0.11 0.04 –0.10 –0.26 –0.38 –0.37 –0.25 –0.19 –0.08 –0.02 –0.06 –0.24 0.01 –0.11 –0.28 –0.41 –0.42 –0.31 –0.49 –0.50 –0.44 –0.41 –0.49 –0.66 0.15 0.14 0.00 –0.21 –0.34 –0.31 60° 65° 70° 75° 80° 85° –0.15 –0.16 –0.22 –0.24 –0.26 –0.32 0.17 0.14 0.14 0.10 0.04 0.01 0.21 0.25 0.30 0.33 0.33 0.33 –0.09 –0.07 –0.03 0.04 0.12 0.19 0.25 0.23 0.20 0.15 0.12 0.13 –0.74 –0.66 –0.53 –0.41 –0.34 –0.34 –0.24 –0.43 –0.67 –0.82 –0.78 –0.56 –0.26 –0.14 –0.18 –0.41 –0.71 –0.84 –0.47 –0.58 –0.46 –0.32 –0.40 –0.73 –0.27 –0.40 –0.65 –0.78 –0.66 –0.55 –0.79 –0.74 –0.70 –0.87 –1.17 –1.21 –0.35 –0.52 –0.64 –0.58 –0.61 –0.91 90° 95° 100° 105° 110° 115° –0.35 –0.37 –0.40 –0.46 –0.48 –0.47 –0.06 –0.12 –0.17 –0.23 –0.27 –0.33 0.28 0.22 0.15 0.05 –0.03 –0.11 0.25 0.27 0.24 0.17 0.04 –0.12 0.20 0.31 0.43 0.51 0.52 0.45 –0.39 –0.44 –0.42 –0.34 –0.22 –0.13 –0.35 –0.26 –0.32 –0.44 –0.46 –0.35 –0.68 –0.36 –0.16 –0.18 –0.33 –0.41 –1.01 –0.87 –0.48 –0.21 –0.25 –0.43 –0.76 –1.13 –1.13 –0.67 –0.30 –0.33 –1.05 –1.15 –1.51 –1.51 –1.00 –0.60 –1.16 –1.05 –1.03 –1.33 –1.32 –0.74 120° 125° 130° 135° 140° 145° –0.47 –0.47 –0.45 –0.42 –0.38 –0.38 –0.37 –0.38 –0.38 –0.38 –0.36 –0.33 –0.18 –0.21 –0.21 –0.20 –0.16 –0.11 –0.27 –0.41 –0.50 –0.54 –0.52 –0.46 0.30 0.10 –0.11 –0.28 –0.38 –0.40 –0.13 –0.25 –0.46 –0.70 –0.90 –1.00 –0.19 –0.12 –0.23 –0.49 –0.81 –1.06 –0.30 –0.12 –0.06 –0.23 –0.58 –0.94 –0.50 –0.34 –0.19 –0.23 –0.53 –0.93 –0.60 –0.66 –0.45 –0.29 –0.45 –0.90 –0.68 –0.98 –1.02 –0.79 –0.74 –1.07 –0.34 –0.52 –0.89 –0.82 –0.56 –0.67 150° 155° 160° 165° 170° 175° –0.30 –0.29 –0.25 –0.27 –0.23 –0.23 –0.32 –0.28 –0.25 –0.22 –0.21 –0.20 –0.05 0.00 0.05 0.08 0.11 0.13 –0.37 –0.26 –0.17 –0.08 –0.02 0.02 –0.34 –0.25 –0.13 –0.03 0.05 0.09 –0.99 –0.88 –0.74 –0.60 –0.49 –0.43 –1.14 –1.05 –0.85 –0.63 –0.45 –0.34 –1.13 –1.10 –0.89 –0.63 –0.41 –0.28 –1.24 –1.27 –1.07 –0.77 –0.49 –0.33 –1.37 –1.55 –1.36 –1.00 –0.65 –0.43 –1.61 –1.96 –1.89 –1.51 –1.10 –0.82 –1.21 –1.78 –1.89 –1.51 –1.00 –0.64 180° 185° 190° 195° 200° 205° –0.20 –0.21 –0.21 –0.24 –0.27 –0.31 –0.21 –0.21 –0.22 –0.24 –0.26 –0.29 0.12 0.12 0.10 0.07 0.03 –0.02 0.02 0.01 –0.04 –0.09 –0.18 –0.28 0.11 0.09 0.03 –0.07 –0.18 –0.30 –0.41 –0.44 –0.52 –0.64 –0.79 –0.92 –0.32 –0.37 –0.50 –0.69 –0.92 –1.10 –0.25 –0.31 –0.47 –0.71 –0.97 –1.15 –0.28 –0.36 –0.56 –0.85 –1.15 –1.32 –0.38 –0.48 –0.74 –1.10 –1.45 –1.56 –0.75 –0.87 –1.20 –1.62 –1.97 –1.95 –0.54 –0.70 –1.10 –1.62 –1.95 –1.75 210° 215° 220° 225° 230° 235° –0.33 –0.37 –0.38 –0.41 –0.45 –0.43 –0.32 –0.37 –0.38 –0.41 –0.41 –0.41 –0.07 –0.15 –0.18 –0.22 –0.23 –0.22 –0.39 –0.46 –0.54 –0.55 –0.52 –0.43 –0.40 –0.46 –0.43 –0.31 –0.13 0.10 –1.01 –0.99 –0.87 –0.65 –0.41 –0.22 –1.16 –1.03 –0.75 –0.42 –0.18 –0.11 –1.14 –0.90 –0.52 –0.18 –0.04 –0.13 –1.22 –0.85 –0.43 –0.17 –0.17 –0.38 –1.30 –0.80 –0.37 –0.26 –0.47 –0.68 –1.49 –0.93 –0.67 –0.81 –1.07 –1.01 –1.14 –0.63 –0.60 –0.89 –0.93 –0.56 240° 245° 250° 255° 260° 265° –0.45 –0.48 –0.46 –0.41 –0.38 –0.35 –0.39 –0.32 –0.29 –0.26 –0.20 –0.13 –0.19 –0.13 –0.05 0.03 0.11 0.19 –0.29 –0.14 0.01 0.13 0.21 0.23 0.32 0.47 0.54 0.53 0.44 0.31 –0.13 –0.15 –0.27 –0.40 –0.49 –0.49 –0.20 –0.36 –0.48 –0.47 –0.37 –0.32 –0.33 –0.45 –0.40 –0.26 –0.24 –0.42 –0.52 –0.46 –0.28 –0.27 –0.53 –0.90 –0.61 –0.38 –0.38 –0.75 –1.14 –1.10 –0.71 –0.69 –1.11 –1.54 –1.45 –1.14 –0.42 –0.86 –1.40 –1.33 –1.03 –1.11 270° 275° 280° 285° 290° 295° –0.29 –0.29 –0.23 –0.19 –0.16 –0.15 –0.08 –0.02 0.02 0.06 0.09 0.12 0.24 0.27 0.28 0.27 0.25 0.21 0.22 0.17 0.09 0.01 –0.05 –0.09 0.19 0.10 0.07 0.09 0.13 0.17 –0.43 –0.36 –0.34 –0.40 –0.50 –0.62 –0.41 –0.60 –0.77 –0.78 –0.64 –0.42 –0.69 –0.85 –0.73 –0.45 –0.24 –0.20 –0.98 –0.72 –0.43 –0.35 –0.46 –0.54 –0.73 –0.56 –0.67 –0.77 –0.63 –0.38 –1.10 –1.25 –1.17 –0.88 –0.71 –0.74 –1.20 –0.93 –0.67 –0.66 –0.67 –0.50 300° 305° 310° 315° 320° 325° –0.11 –0.09 –0.10 –0.05 –0.02 –0.03 0.12 0.12 0.14 0.12 0.09 0.07 0.17 0.12 0.09 0.05 0.02 0.00 –0.11 –0.11 –0.10 –0.08 –0.06 –0.04 0.20 0.19 0.15 0.12 0.07 0.03 –0.69 –0.70 –0.62 –0.49 –0.34 –0.22 –0.26 –0.20 –0.23 –0.30 –0.34 –0.34 –0.28 –0.37 –0.36 –0.25 –0.10 0.01 –0.44 –0.24 –0.08 –0.04 –0.10 –0.17 –0.27 –0.31 –0.39 –0.35 –0.20 –0.05 –0.77 –0.64 –0.47 –0.39 –0.42 –0.48 –0.34 –0.34 –0.38 –0.28 –0.06 0.10 330° 335° 340° 345° 350° 355° –0.04 0.01 –0.02 0.00 –0.02 0.00 0.06 0.02 0.02 0.01 0.00 –0.01 –0.01 –0.02 –0.01 –0.02 –0.01 –0.02 –0.03 –0.02 –0.02 –0.01 0.00 0.00 0.00 –0.01 –0.02 –0.01 –0.01 0.00 –0.12 –0.06 –0.01 0.01 0.01 0.02 –0.30 –0.22 –0.15 –0.09 –0.03 0.00 0.08 0.10 0.08 0.05 0.02 0.00 –0.22 –0.21 –0.16 –0.10 –0.04 0.00 0.06 0.11 0.11 0.08 0.05 0.03 –0.48 –0.39 –0.27 –0.15 –0.06 0.00 0.13 0.08 0.02 –0.01 –0.01 0.00 BE171211.book Page 77 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 77 Table A.21 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° –0.01 0.01 0.05 0.11 0.19 0.21 0.00 0.01 0.07 0.12 0.14 0.03 0.00 0.01 0.06 0.11 0.11 0.02 0.00 –0.06 –0.08 –0.16 –0.20 –0.21 0.02 –0.06 –0.18 –0.38 –0.60 –0.66 –0.02 –0.05 –0.04 –0.04 –0.06 –0.27 –0.01 –0.07 –0.18 –0.33 –0.34 –0.26 0.02 –0.03 –0.08 –0.17 –0.20 –0.26 0.03 –0.02 –0.12 –0.28 –0.31 –0.35 0.01 –0.07 –0.19 –0.34 –0.43 –0.70 10000 Hz 10600 Hz –0.01 –0.07 –0.18 –0.34 –0.48 –0.59 –0.01 –0.04 –0.12 –0.26 –0.25 –0.14 30° 35° 40° 45° 50° 55° 0.09 –0.13 –0.30 –0.31 –0.27 –0.40 –0.23 –0.47 –0.51 –0.45 –0.54 –0.76 –0.19 –0.36 –0.30 –0.22 –0.38 –0.55 –0.23 –0.34 –0.49 –0.45 –0.54 –0.95 –0.47 –0.40 –0.89 –1.37 –1.40 –1.66 –0.48 –0.33 –0.48 –1.20 –0.97 –1.24 –0.44 –0.83 –0.80 –1.01 –1.30 –1.28 –0.49 –0.64 –0.78 –1.17 –1.17 –1.64 –0.60 –0.83 –0.96 –1.21 –1.52 –1.67 –1.22 –1.40 –1.58 –1.78 –2.03 –2.37 –0.75 –0.99 –1.49 –1.91 –2.14 –2.29 –0.43 –0.85 –1.06 –1.46 –2.00 –2.36 60° 65° 70° 75° 80° 85° –0.63 –0.67 –0.64 –0.80 –0.94 –0.91 –0.87 –0.94 –1.05 –1.13 –1.24 –1.31 –0.52 –0.68 –1.04 –1.17 –1.09 –1.17 –1.11 –1.22 –1.16 –0.98 –1.56 –1.85 –1.59 –1.74 –2.03 –2.12 –2.09 –2.30 –1.80 –1.85 –2.11 –2.11 –2.23 –2.66 –1.97 –1.98 –2.65 –2.68 –2.87 –3.07 –1.53 –2.20 –2.36 –2.90 –3.03 –3.22 –2.11 –2.16 –2.63 –3.02 –3.61 –3.57 –2.54 –3.09 –3.21 –3.52 –4.10 –4.59 –2.84 –2.97 –3.28 –3.69 –3.99 –4.78 –2.56 –3.08 –3.27 –3.49 –4.09 –4.43 90° 95° 100° 105° 110° 115° –1.13 –1.50 –1.44 –1.38 –1.64 –1.50 –1.48 –1.69 –1.95 –2.06 –1.90 –2.06 –1.25 –1.37 –1.82 –2.16 –2.11 –2.00 –1.90 –1.74 –1.64 –2.26 –2.97 –2.82 –2.90 –2.54 –2.79 –2.52 –3.63 –3.89 –2.47 –3.07 –2.79 –3.16 –2.89 –3.69 –3.18 –3.42 –3.75 –3.58 –3.76 –3.78 –3.26 –3.59 –3.95 –4.01 –3.51 –4.32 –3.78 –3.89 –4.28 –4.60 –4.21 –4.41 –4.48 –4.93 –5.00 –5.36 –5.27 –4.95 –5.06 –4.97 –5.25 –5.30 –5.82 –5.42 –5.22 –5.01 –5.14 –5.65 –5.93 –5.53 120° 125° 130° 135° 140° 145° –0.83 –0.51 –0.84 –1.18 –1.03 –0.87 –1.82 –1.02 –0.93 –1.49 –1.64 –1.36 –2.00 –1.52 –0.88 –1.05 –1.62 –1.59 –2.43 –2.09 –1.71 –1.50 –1.82 –2.06 –3.87 –3.15 –2.54 –2.27 –2.40 –3.34 –4.23 –4.18 –3.10 –2.46 –2.16 –2.72 –5.02 –5.01 –4.62 –3.17 –2.94 –3.07 –4.74 –5.18 –5.44 –3.43 –3.29 –3.12 –4.86 –6.15 –5.76 –4.47 –3.49 –3.65 –5.80 –6.90 –6.57 –5.93 –4.25 –4.53 –5.66 –6.72 –7.19 –6.50 –4.61 –4.82 –5.32 –6.57 –7.84 –6.70 –4.80 –4.90 150° 155° 160° 165° 170° 175° –1.21 –1.87 –2.21 –1.91 –1.33 –0.90 –1.50 –2.19 –2.70 –2.44 –1.75 –1.24 –1.44 –1.96 –2.69 –2.59 –1.81 –1.16 –1.88 –2.11 –2.94 –3.31 –2.61 –1.80 –3.30 –3.03 –3.64 –4.10 –3.39 –2.51 –3.55 –3.43 –3.91 –4.74 –4.09 –3.03 –4.14 –3.98 –4.18 –5.28 –4.94 –3.67 –4.33 –4.38 –4.24 –5.46 –5.37 –3.94 –4.44 –5.16 –4.74 –5.74 –5.91 –4.43 –4.91 –6.15 –5.60 –6.40 –6.89 –5.34 –4.88 –6.34 –5.74 –6.50 –7.42 –5.75 –4.98 –6.24 –6.07 –6.24 –7.53 –6.16 180° 185° 190° 195° 200° 205° –0.77 –0.96 –1.42 –1.98 –2.20 –1.81 –1.09 –1.35 –1.96 –2.64 –2.75 –2.06 –0.97 –1.29 –2.02 –2.69 –2.54 –1.77 –1.49 –1.84 –2.69 –3.34 –2.98 –2.33 –2.29 –2.89 –4.06 –4.59 –3.75 –3.06 –2.72 –3.38 –4.54 –4.63 –3.52 –3.27 –3.21 –3.94 –5.26 –5.09 –4.05 –4.23 –3.43 –4.30 –5.76 –5.23 –4.26 –4.59 –3.84 –4.83 –6.28 –5.58 –4.83 –5.35 –4.67 –5.80 –7.24 –6.32 –5.69 –6.21 –5.00 –6.28 –7.79 –6.35 –6.07 –6.12 –5.36 –6.67 –7.74 –6.17 –6.59 –5.94 210° 215° 220° 225° 230° 235° –1.17 –0.89 –1.11 –1.23 –0.82 –0.59 –1.37 –1.40 –1.79 –1.50 –0.95 –1.22 –1.44 –1.73 –1.64 –1.08 –1.09 –1.61 –2.40 –2.61 –2.01 –1.50 –1.62 –1.98 –3.20 –2.83 –2.20 –2.50 –2.75 –3.61 –3.65 –2.68 –2.45 –2.52 –3.42 –4.45 –3.96 –3.16 –3.01 –3.33 –5.05 –4.94 –4.31 –3.19 –3.41 –3.87 –5.65 –5.46 –4.32 –3.87 –3.49 –5.25 –5.76 –6.32 –4.79 –4.68 –4.37 –6.45 –6.79 –6.52 –5.09 –4.72 –5.03 –6.75 –7.54 –6.68 –5.34 –4.80 –5.52 –7.00 –8.09 –6.37 240° 245° 250° 255° 260° 265° –1.00 –1.55 –1.58 –1.42 –1.48 –1.48 –1.91 –1.96 –1.94 –2.15 –1.97 –1.74 –1.89 –2.08 –2.19 –2.20 –1.87 –1.34 –2.45 –2.96 –3.30 –2.38 –1.59 –1.66 –4.22 –3.97 –3.16 –2.64 –3.14 –2.79 –4.29 –3.63 –3.16 –3.05 –2.98 –2.94 –4.89 –3.79 –3.62 –3.76 –3.65 –3.49 –4.83 –4.32 –3.83 –4.15 –4.03 –3.71 –4.96 –4.33 –4.33 –4.83 –4.33 –3.93 –5.82 –4.99 –5.39 –5.25 –5.07 –4.89 –5.37 –5.62 –6.01 –5.41 –5.24 –4.98 –5.51 –5.77 –5.84 –5.86 –5.24 –5.24 270° 275° 280° 285° 290° 295° –1.17 –0.95 –0.92 –0.77 –0.63 –0.67 –1.49 –1.27 –1.20 –1.15 –1.09 –0.98 –1.23 –1.20 –1.25 –1.23 –1.01 –0.65 –1.97 –2.14 –1.55 –0.98 –1.20 –1.33 –2.73 –2.12 –2.48 –2.37 –2.05 –1.75 –2.73 –2.63 –2.22 –2.19 –2.14 –1.86 –3.11 –3.06 –2.98 –2.62 –2.57 –2.07 –3.47 –3.39 –3.15 –3.04 –2.54 –2.18 –3.94 –3.66 –3.63 –3.10 –2.61 –2.27 –4.49 –4.62 –4.16 –3.46 –3.26 –3.04 –5.23 –4.76 –3.97 –3.82 –3.32 –3.09 –5.09 –4.53 –4.25 –3.53 –3.40 –3.13 300° 305° 310° 315° 320° 325° –0.64 –0.42 –0.29 –0.31 –0.28 –0.10 –0.89 –0.74 –0.52 –0.45 –0.55 –0.52 –0.54 –0.62 –0.44 –0.24 –0.27 –0.24 –1.10 –0.80 –0.48 –0.62 –0.83 –0.57 –1.73 –1.73 –1.35 –1.41 –1.17 –0.72 –1.77 –1.21 –1.12 –1.14 –0.47 –0.37 –1.88 –1.31 –1.30 –1.03 –0.85 –0.76 –1.74 –1.65 –1.34 –1.26 –0.88 –0.77 –2.11 –1.83 –1.51 –1.28 –1.04 –0.87 –2.63 –2.33 –2.13 –1.81 –1.66 –1.46 –2.89 –2.40 –2.22 –2.02 –1.50 –1.12 –2.68 –2.49 –2.04 –1.57 –1.12 –0.91 330° 335° 340° 345° 350° 355° 0.09 0.19 0.18 0.12 0.06 0.02 –0.31 –0.07 0.06 0.08 0.05 0.02 –0.08 0.08 0.12 0.09 0.03 0.01 –0.18 0.05 0.12 0.10 0.07 0.03 –0.64 –0.61 –0.39 –0.16 –0.03 0.01 –0.45 –0.27 –0.09 –0.03 –0.01 0.01 –0.45 –0.33 –0.34 –0.26 –0.12 –0.02 –0.56 –0.37 –0.33 –0.27 –0.16 –0.07 –0.68 –0.45 –0.38 –0.33 –0.20 –0.09 –1.17 –0.73 –0.49 –0.34 –0.17 –0.06 –0.82 –0.65 –0.54 –0.35 –0.16 –0.05 –0.45 –0.23 –0.30 –0.27 –0.14 –0.04 BE171211.book Page 78 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 78 Table A.22 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the Hand-held Analyzer’s display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.01 –0.03 –0.14 –0.34 –0.52 –0.59 0.00 –0.07 –0.15 –0.29 –0.56 –0.86 0.01 –0.05 –0.12 –0.10 –0.11 –0.40 0.01 –0.05 –0.18 –0.48 –0.81 –1.01 –0.02 –0.09 –0.11 –0.06 –0.09 –0.29 –0.06 –0.08 –0.12 –0.41 –0.97 –1.12 –0.06 –0.14 –0.23 –0.44 –0.57 –1.04 –0.16 –0.41 –0.46 –0.41 –0.65 –1.14 –0.05 –0.16 –0.13 –0.41 –0.50 –0.90 0.03 –0.04 –0.22 –0.31 –0.81 –1.30 0.08 –0.05 –0.13 –0.31 –0.56 –1.05 30° 35° 40° 45° 50° 55° –0.77 –0.97 –1.09 –1.55 –2.01 –2.35 –1.08 –1.54 –1.60 –1.93 –2.22 –2.71 –0.65 –1.15 –1.55 –2.07 –2.11 –2.53 –1.45 –1.65 –2.07 –2.59 –3.16 –3.46 –0.53 –1.17 –1.65 –1.97 –2.67 –3.39 –1.53 –1.59 –2.09 –2.79 –3.25 –3.77 –1.50 –2.15 –2.50 –2.94 –3.33 –4.17 –1.46 –1.84 –2.82 –3.34 –3.82 –4.34 –1.27 –1.48 –2.31 –3.04 –3.76 –4.35 –1.81 –2.29 –2.88 –3.44 –4.33 –5.37 –1.58 –2.27 –2.92 –3.54 –4.22 –5.22 60° 65° 70° 75° 80° 85° –2.98 –3.25 –3.71 –3.94 –4.04 –4.76 –3.25 –3.98 –4.20 –4.57 –5.00 –5.03 –3.27 –3.75 –4.23 –4.65 –5.17 –5.57 –3.85 –4.63 –5.27 –5.61 –6.11 –6.75 –3.73 –3.92 –4.82 –5.73 –5.98 –6.38 –4.65 –5.16 –5.34 –6.25 –7.44 –7.62 –4.76 –5.62 –6.37 –6.42 –7.57 –8.45 –5.65 –5.75 –6.88 –7.59 –7.83 –9.09 –4.81 –5.86 –6.39 –7.26 –8.01 –8.59 –5.83 –6.65 –7.77 –8.47 –9.53 –10.22 –6.34 –6.89 –7.78 –8.87 –9.96 –10.91 90° 95° 100° 105° 110° 115° –5.23 –6.10 –5.82 –5.95 –6.35 –6.45 –5.67 –6.27 –6.54 –6.61 –7.32 –7.62 –5.85 –6.59 –7.41 –7.05 –6.93 –7.51 –6.76 –7.19 –8.10 –8.69 –8.32 –9.00 –7.34 –7.48 –7.76 –9.01 –9.23 –8.60 –7.82 –8.70 –9.09 –9.35 –9.96 –9.92 –8.38 –9.08 –9.66 –10.07 –10.94 –11.45 –9.86 –9.97 –11.18 –11.44 –11.10 –12.22 –9.67 –10.22 –10.79 –10.86 –12.20 –11.94 –11.04 –11.80 –12.47 –12.93 –13.61 –13.87 –11.34 –12.40 –13.58 –13.14 –14.21 –14.37 120° 125° 130° 135° 140° 145° –6.14 –6.47 –8.01 –7.45 –5.80 –4.92 –6.64 –6.63 –8.53 –8.84 –7.15 –5.37 –7.24 –7.43 –9.32 –9.87 –7.65 –5.71 –9.32 –8.84 –9.29 –10.53 –9.17 –7.24 –8.75 –8.09 –8.93 –11.08 –10.05 –7.78 –10.20 –9.89 –10.87 –13.25 –11.87 –9.03 –11.40 –10.25 –10.41 –12.61 –12.24 –10.09 –12.66 –12.57 –11.28 –13.16 –13.01 –10.41 –12.19 –12.39 –11.06 –13.48 –15.67 –11.98 –14.51 –15.47 –13.41 –13.72 –17.81 –14.27 –14.46 –15.37 –14.47 –14.69 –18.07 –14.49 150° 155° 160° 165° 170° 175° –5.78 –6.40 –6.84 –6.57 –7.93 –6.74 –6.70 –7.09 –7.89 –7.11 –8.75 –7.72 –7.05 –7.22 –8.72 –7.57 –8.82 –8.19 –7.64 –8.59 –9.87 –8.94 –10.14 –9.37 –7.41 –8.40 –10.14 –9.12 –10.21 –9.95 –8.22 –10.07 –10.65 –10.65 –11.21 –11.37 –8.87 –10.97 –11.15 –11.60 –11.68 –12.68 –10.07 –12.01 –11.51 –12.24 –11.87 –13.45 –10.57 –11.99 –12.24 –13.22 –12.49 –13.91 –11.63 –12.30 –14.01 –15.36 –13.79 –16.67 –12.23 –12.75 –14.83 –16.10 –13.82 –16.83 180° 185° 190° 195° 200° 205° –5.93 –7.36 –8.03 –6.77 –7.27 –6.34 –6.83 –8.52 –8.84 –7.44 –8.16 –6.91 –7.23 –8.85 –8.94 –7.96 –8.75 –7.35 –8.40 –10.33 –10.25 –9.29 –9.66 –8.81 –8.76 –10.80 –9.79 –9.63 –9.67 –8.60 –10.05 –12.09 –11.07 –11.19 –10.25 –10.20 –11.15 –13.03 –11.38 –11.83 –10.80 –10.46 –12.52 –12.48 –11.64 –12.05 –11.72 –10.16 –13.73 –14.55 –11.90 –12.95 –12.61 –10.24 –14.67 –15.93 –13.90 –14.98 –14.35 –12.52 –16.33 –16.48 –14.80 –15.57 –15.49 –13.10 210° 215° 220° 225° 230° 235° –6.02 –4.91 –6.75 –8.12 –8.16 –6.29 –6.89 –5.76 –7.77 –9.40 –8.75 –6.80 –6.78 –6.38 –8.22 –9.92 –8.50 –7.61 –7.53 –7.96 –10.08 –10.70 –8.72 –8.52 –7.17 –8.25 –10.59 –11.32 –9.01 –8.34 –8.45 –9.36 –11.43 –12.14 –10.03 –9.71 –9.07 –10.54 –12.55 –12.06 –10.18 –10.60 –9.95 –11.82 –14.64 –12.32 –10.83 –11.54 –9.78 –12.59 –14.73 –11.69 –11.37 –12.98 –12.20 –14.47 –16.73 –13.24 –13.75 –14.62 –13.15 –16.09 –16.88 –13.66 –14.44 –15.75 240° 245° 250° 255° 260° 265° –6.22 –6.79 –6.64 –6.05 –5.90 –6.06 –6.74 –7.56 –7.37 –6.55 –6.99 –6.47 –8.09 –8.10 –7.20 –7.32 –7.41 –6.68 –9.29 –8.76 –8.22 –9.02 –8.15 –7.23 –8.70 –8.50 –9.08 –8.66 –7.48 –7.31 –9.91 –9.69 –9.82 –9.03 –8.85 –8.62 –11.03 –11.08 –10.31 –9.66 –9.19 –8.86 –11.55 –11.42 –10.62 –10.49 –9.92 –8.99 –12.77 –12.11 –11.63 –11.54 –10.43 –10.53 –14.48 –14.05 –13.74 –13.13 –12.80 –12.10 –14.74 –14.89 –14.51 –13.38 –13.38 –12.57 270° 275° 280° 285° 290° 295° –5.58 –4.97 –4.23 –4.15 –3.76 –3.41 –5.77 –5.10 –5.09 –4.71 –4.36 –4.04 –5.89 –5.71 –5.34 –4.72 –4.30 –3.93 –7.00 –6.92 –6.09 –5.69 –5.43 –4.66 –7.16 –6.23 –5.98 –5.78 –4.69 –3.88 –7.64 –7.43 –7.10 –5.97 –5.19 –5.16 –8.32 –8.15 –7.26 –6.32 –6.20 –5.41 –9.24 –8.23 –7.31 –7.47 –6.80 –5.82 –9.90 –8.60 –8.16 –7.44 –6.35 –5.81 –11.41 –10.42 –9.90 –8.81 –8.11 –6.88 –11.71 –11.38 –10.32 –9.53 –8.26 –7.53 300° 305° 310° 315° 320° 325° –3.15 –2.46 –2.08 –1.75 –1.11 –1.12 –3.44 –2.81 –2.29 –2.09 –1.73 –1.58 –3.43 –2.64 –2.28 –2.14 –1.67 –1.23 –3.89 –3.61 –3.19 –2.73 –2.20 –1.65 –3.80 –3.42 –2.68 –1.96 –1.68 –1.24 –4.57 –3.66 –3.13 –2.76 –2.01 –1.54 –4.58 –4.04 –3.30 –2.83 –2.37 –2.00 –5.20 –4.32 –3.68 –3.31 –2.61 –2.02 –4.78 –4.41 –3.73 –2.77 –2.06 –1.46 –6.34 –5.55 –4.68 –3.67 –3.16 –2.59 –6.85 –5.81 –4.81 –4.34 –3.40 –2.65 330° 335° 340° 345° 350° 355° –0.88 –0.70 –0.61 –0.35 –0.14 –0.05 –1.11 –0.91 –0.70 –0.34 –0.10 –0.01 –0.80 –0.42 –0.17 –0.14 –0.12 –0.07 –1.54 –1.06 –0.85 –0.52 –0.18 –0.06 –0.56 –0.36 –0.09 –0.05 –0.09 –0.04 –1.40 –1.06 –0.87 –0.29 0.00 0.03 –1.44 –0.93 –0.50 –0.32 –0.11 0.05 –1.47 –1.04 –0.77 –0.47 –0.18 –0.21 –0.89 –0.66 –0.44 –0.14 –0.11 –0.03 –2.02 –1.45 –0.99 –0.48 –0.37 –0.08 –1.98 –1.50 –0.88 –0.59 –0.25 –0.14 BE171211.book Page 79 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 79 Table A.23 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.02 0.00 –0.01 0.00 –0.01 –0.02 0.00 –0.01 0.01 0.02 0.03 0.03 0.00 –0.01 0.00 –0.01 –0.02 –0.03 0.00 0.00 0.01 0.00 0.00 –0.03 0.00 0.00 0.00 0.00 0.00 –0.01 0.00 0.01 0.00 –0.02 –0.04 –0.10 0.00 0.00 –0.02 –0.07 –0.13 –0.23 2240 Hz 0.00 0.00 0.03 0.05 0.11 0.13 2500 Hz 0.00 –0.01 –0.05 –0.13 –0.22 –0.33 2800 Hz 0.00 0.01 0.06 0.09 0.14 0.14 0.00 –0.03 –0.07 –0.16 –0.28 –0.41 0.00 0.00 0.00 0.00 0.02 0.07 30° 35° 40° 45° 50° 55° 0.00 –0.01 –0.04 –0.03 –0.06 –0.08 0.07 0.06 0.11 0.12 0.15 0.16 –0.02 –0.02 0.01 0.04 0.08 0.12 –0.04 –0.07 –0.08 –0.12 –0.15 –0.17 0.03 0.05 0.10 0.16 0.20 0.22 –0.16 –0.28 –0.40 –0.55 –0.68 –0.76 –0.30 –0.36 –0.36 –0.30 –0.22 –0.18 0.15 0.09 –0.01 –0.16 –0.30 –0.32 –0.35 –0.31 –0.18 –0.04 –0.02 –0.19 0.10 –0.07 –0.31 –0.55 –0.61 –0.42 –0.47 –0.44 –0.31 –0.21 –0.32 –0.68 0.11 0.04 –0.16 –0.44 –0.54 –0.36 60° 65° 70° 75° 80° 85° –0.14 –0.12 –0.15 –0.18 –0.22 –0.25 0.16 0.15 0.13 0.10 0.08 0.02 0.18 0.24 0.29 0.32 0.34 0.33 –0.17 –0.16 –0.10 –0.02 0.08 0.17 0.21 0.17 0.11 0.05 0.02 0.06 –0.75 –0.66 –0.53 –0.42 –0.38 –0.42 –0.24 –0.41 –0.67 –0.85 –0.83 –0.67 –0.22 –0.12 –0.16 –0.39 –0.70 –0.85 –0.43 –0.54 –0.42 –0.27 –0.37 –0.74 –0.19 –0.22 –0.54 –0.75 –0.54 –0.38 –1.05 –1.01 –0.69 –0.67 –1.04 –1.13 –0.22 –0.47 –0.94 –0.93 –0.57 –0.75 90° 95° 100° 105° 110° 115° –0.28 –0.36 –0.37 –0.38 –0.42 –0.47 –0.04 –0.08 –0.16 –0.22 –0.28 –0.31 0.29 0.24 0.16 0.08 –0.02 –0.10 0.24 0.27 0.25 0.16 0.04 –0.12 0.17 0.32 0.47 0.58 0.59 0.50 –0.50 –0.55 –0.50 –0.34 –0.16 –0.04 –0.51 –0.48 –0.56 –0.60 –0.48 –0.24 –0.71 –0.45 –0.35 –0.44 –0.55 –0.41 –1.05 –0.96 –0.63 –0.47 –0.59 –0.71 –0.71 –1.25 –1.25 –0.76 –0.52 –0.75 –0.83 –0.93 –1.58 –1.77 –1.17 –0.84 –1.17 –0.86 –0.77 –1.49 –1.74 –1.01 120° 125° 130° 135° 140° 145° –0.46 –0.44 –0.45 –0.44 –0.37 –0.37 –0.35 –0.38 –0.38 –0.36 –0.36 –0.33 –0.17 –0.21 –0.22 –0.20 –0.17 –0.12 –0.28 –0.42 –0.51 –0.56 –0.54 –0.47 0.32 0.09 –0.14 –0.33 –0.44 –0.45 –0.03 –0.16 –0.41 –0.71 –0.95 –1.07 0.00 0.08 –0.06 –0.41 –0.82 –1.14 –0.07 0.20 0.20 –0.09 –0.56 –1.01 –0.51 –0.09 0.19 0.07 –0.40 –1.01 –0.89 –0.51 0.01 0.16 –0.19 –0.90 –1.12 –1.25 –0.71 –0.15 –0.17 –0.84 –0.72 –1.11 –1.04 –0.26 0.14 –0.30 150° 155° 160° 165° 170° 175° –0.32 –0.29 –0.27 –0.25 –0.25 –0.21 –0.31 –0.27 –0.23 –0.20 –0.18 –0.18 –0.07 0.00 0.05 0.09 0.11 0.14 –0.38 –0.28 –0.18 –0.10 –0.02 0.01 –0.38 –0.27 –0.15 –0.03 0.05 0.11 –1.05 –0.94 –0.78 –0.62 –0.49 –0.41 –1.25 –1.13 –0.91 –0.68 –0.48 –0.36 –1.24 –1.18 –0.94 –0.65 –0.41 –0.25 –1.46 –1.50 –1.23 –0.86 –0.55 –0.35 –1.56 –1.79 –1.55 –1.11 –0.71 –0.45 –1.79 –2.35 –2.19 –1.63 –1.10 –0.76 –1.36 –2.28 –2.34 –1.76 –1.11 –0.69 180° 185° 190° 195° 200° 205° –0.20 –0.22 –0.24 –0.27 –0.28 –0.31 –0.16 –0.17 –0.19 –0.19 –0.23 –0.26 0.15 0.14 0.12 0.09 0.05 0.00 0.02 0.01 –0.01 –0.08 –0.15 –0.26 0.13 0.12 0.07 –0.02 –0.13 –0.26 –0.38 –0.40 –0.49 –0.62 –0.78 –0.96 –0.32 –0.36 –0.49 –0.69 –0.95 –1.19 –0.21 –0.25 –0.41 –0.67 –0.97 –1.23 –0.29 –0.35 –0.56 –0.88 –1.25 –1.53 –0.36 –0.45 –0.70 –1.12 –1.57 –1.84 –0.65 –0.75 –1.09 –1.61 –2.17 –2.35 –0.54 –0.68 –1.11 –1.77 –2.37 –2.27 210° 215° 220° 225° 230° 235° –0.34 –0.36 –0.40 –0.45 –0.45 –0.48 –0.27 –0.31 –0.34 –0.35 –0.37 –0.36 –0.04 –0.10 –0.16 –0.19 –0.21 –0.20 –0.37 –0.47 –0.54 –0.57 –0.55 –0.45 –0.38 –0.46 –0.46 –0.36 –0.17 0.08 –1.09 –1.13 –1.01 –0.76 –0.43 –0.15 –1.32 –1.22 –0.88 –0.43 –0.04 0.16 –1.29 –1.03 –0.53 0.00 0.32 0.31 –1.48 –1.02 –0.37 0.15 0.29 0.03 –1.60 –0.88 –0.09 0.31 0.15 –0.41 –1.80 –0.83 –0.09 0.00 –0.56 –1.20 –1.31 –0.23 0.25 –0.12 –0.91 –1.12 240° 245° 250° 255° 260° 265° –0.48 –0.48 –0.46 –0.44 –0.40 –0.38 –0.35 –0.32 –0.27 –0.26 –0.16 –0.09 –0.17 –0.11 –0.02 0.05 0.17 0.26 –0.30 –0.13 0.04 0.20 0.28 0.32 0.33 0.54 0.66 0.66 0.58 0.43 0.03 0.06 –0.06 –0.27 –0.46 –0.55 0.11 –0.14 –0.43 –0.59 –0.57 –0.46 0.02 –0.36 –0.54 –0.44 –0.31 –0.39 –0.42 –0.69 –0.59 –0.46 –0.60 –0.92 –0.84 –0.75 –0.55 –0.75 –1.19 –1.19 –1.17 –0.90 –1.14 –1.70 –1.54 –0.90 –0.80 –1.06 –1.71 –1.45 –0.75 –0.82 270° 275° 280° 285° 290° 295° –0.34 –0.30 –0.26 –0.22 –0.21 –0.14 –0.03 0.01 0.07 0.10 0.15 0.14 0.33 0.36 0.38 0.36 0.35 0.30 0.30 0.25 0.16 0.07 –0.02 –0.09 0.27 0.13 0.06 0.06 0.10 0.16 –0.54 –0.46 –0.40 –0.40 –0.48 –0.59 –0.44 –0.57 –0.75 –0.80 –0.67 –0.43 –0.65 –0.83 –0.70 –0.37 –0.10 –0.04 –1.01 –0.70 –0.32 –0.22 –0.37 –0.53 –0.67 –0.35 –0.50 –0.72 –0.54 –0.20 –0.77 –1.09 –1.03 –0.62 –0.56 –0.81 –1.11 –0.73 –0.49 –0.76 –0.79 –0.48 300° 305° 310° 315° 320° 325° –0.15 –0.09 –0.10 –0.06 –0.07 –0.06 0.18 0.17 0.17 0.15 0.15 0.12 0.26 0.20 0.16 0.11 0.08 0.05 –0.12 –0.14 –0.12 –0.10 –0.07 –0.04 0.21 0.22 0.21 0.18 0.13 0.09 –0.66 –0.68 –0.62 –0.50 –0.37 –0.23 –0.23 –0.15 –0.16 –0.24 –0.31 –0.32 –0.14 –0.28 –0.30 –0.19 –0.03 0.09 –0.44 –0.20 0.00 0.02 –0.08 –0.19 –0.09 –0.26 –0.41 –0.39 –0.22 –0.04 –0.88 –0.67 –0.42 –0.35 –0.41 –0.47 –0.32 –0.44 –0.49 –0.28 0.01 0.18 330° 335° 340° 345° 350° 355° –0.02 –0.03 –0.03 –0.02 –0.01 –0.04 0.08 0.07 0.06 0.03 0.04 0.02 0.03 0.02 0.01 0.01 0.02 0.00 –0.03 –0.01 –0.01 0.00 0.00 0.01 0.06 0.03 0.01 0.01 0.00 0.00 –0.14 –0.07 –0.02 0.00 0.01 0.01 –0.29 –0.23 –0.15 –0.09 –0.04 –0.01 0.15 0.16 0.13 0.08 0.04 0.02 –0.24 –0.23 –0.17 –0.10 –0.04 0.00 0.06 0.09 0.08 0.05 0.02 0.00 –0.44 –0.33 –0.21 –0.10 –0.03 0.00 0.20 0.11 0.03 –0.01 –0.02 –0.01 BE171211.book Page 80 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 80 Table A.24 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° 0.00 0.00 0.06 0.13 0.20 0.20 –0.01 0.02 0.09 0.14 0.12 –0.07 0.00 0.03 0.08 0.13 0.14 –0.02 0.00 –0.01 0.07 0.21 0.34 0.32 0.00 –0.02 –0.07 –0.19 –0.36 –0.50 –0.01 0.01 0.04 0.09 0.10 –0.08 0.00 –0.03 –0.07 –0.17 –0.34 –0.48 0.00 –0.03 –0.07 –0.17 –0.34 –0.55 0.00 0.01 –0.07 –0.21 –0.31 –0.39 0.00 –0.08 –0.24 –0.41 –0.45 –0.53 10000 Hz 10600 Hz 0.00 –0.04 –0.23 –0.49 –0.55 –0.50 0.01 –0.07 –0.22 –0.38 –0.40 –0.34 30° 35° 40° 45° 50° 55° 0.07 –0.18 –0.37 –0.27 –0.14 –0.35 –0.43 –0.72 –0.59 –0.31 –0.45 –0.91 –0.27 –0.35 –0.08 –0.04 –0.59 –0.73 0.00 –0.42 –0.37 –0.29 –0.81 –0.82 –0.59 –0.90 –1.29 –1.21 –1.41 –1.78 –0.43 –0.56 –0.60 –1.10 –1.08 –1.21 –0.47 –0.73 –1.05 –0.86 –1.49 –1.48 –0.66 –0.79 –0.95 –1.20 –1.39 –1.49 –0.61 –0.98 –1.13 –1.04 –1.34 –1.80 –1.03 –1.30 –1.36 –1.99 –2.16 –2.23 –0.88 –1.15 –1.53 –2.00 –2.18 –2.71 –0.79 –1.02 –1.19 –1.57 –2.06 –2.46 60° 65° 70° 75° 80° 85° –0.78 –0.75 –0.52 –0.84 –1.35 –1.07 –0.92 –0.79 –1.27 –1.38 –1.09 –1.71 –0.34 –0.73 –1.05 –0.90 –1.29 –1.16 –0.75 –1.34 –0.76 –1.01 –1.47 –1.62 –1.58 –2.08 –1.93 –2.68 –2.02 –2.49 –1.59 –1.93 –1.94 –2.18 –2.22 –2.71 –2.21 –2.04 –2.69 –2.83 –2.75 –3.35 –1.98 –2.45 –2.45 –3.17 –3.28 –3.19 –1.71 –2.41 –2.68 –2.83 –3.56 –3.67 –2.77 –2.58 –3.33 –3.79 –3.92 –4.23 –2.58 –3.27 –3.19 –3.87 –4.34 –4.87 –3.05 –2.90 –3.55 –3.62 –4.40 –4.72 90° 95° 100° 105° 110° 115° –0.83 –1.32 –1.22 –0.98 –1.77 –2.02 –1.89 –1.27 –1.81 –1.85 –1.51 –2.45 –1.27 –2.03 –1.44 –1.65 –1.89 –1.40 –1.90 –1.56 –2.16 –2.03 –2.18 –2.38 –2.57 –3.03 –2.85 –3.42 –2.97 –3.43 –2.40 –2.93 –2.94 –3.26 –3.70 –3.07 –3.48 –3.11 –3.94 –3.76 –4.12 –4.57 –3.64 –3.98 –3.78 –4.14 –4.35 –4.64 –3.54 –3.89 –4.16 –4.46 –4.20 –4.96 –4.64 –4.93 –5.00 –4.94 –5.43 –5.48 –4.63 –5.00 –5.37 –5.47 –5.86 –5.58 –5.73 –5.27 –5.44 –5.38 –5.54 –6.30 120° 125° 130° 135° 140° 145° –1.10 –0.95 –1.44 –0.99 –0.11 –0.07 –2.38 –1.38 –1.60 –1.88 –1.01 –0.44 –2.64 –2.10 –1.07 –1.74 –1.50 –0.31 –1.80 –3.05 –2.02 –1.67 –2.30 –1.02 –3.42 –3.44 –3.99 –2.50 –3.20 –3.05 –3.62 –3.29 –4.40 –3.18 –2.49 –3.60 –3.83 –4.62 –4.25 –5.31 –3.11 –3.87 –4.72 –4.40 –4.80 –5.42 –3.93 –3.67 –5.04 –4.45 –5.24 –5.26 –4.79 –3.58 –5.78 –5.84 –5.83 –5.91 –6.27 –4.22 –6.56 –6.21 –5.85 –6.55 –6.80 –4.64 –6.49 –6.51 –6.16 –6.94 –7.01 –5.20 150° 155° 160° 165° 170° 175° –1.02 –2.32 –2.83 –2.28 –1.47 –0.91 –1.03 –2.47 –3.48 –3.07 –2.10 –1.41 –0.36 –1.87 –3.59 –3.50 –2.28 –1.34 –0.30 –1.46 –3.73 –4.52 –3.14 –1.87 –1.50 –1.82 –4.02 –5.82 –4.73 –3.22 –2.08 –1.62 –3.57 –5.86 –5.05 –3.48 –3.54 –2.13 –3.52 –6.70 –6.40 –4.31 –4.25 –2.54 –3.40 –6.78 –7.18 –4.85 –4.67 –2.89 –3.31 –6.78 –7.65 –5.10 –5.57 –3.95 –3.80 –7.37 –8.94 –6.10 –5.72 –4.60 –3.89 –7.28 –9.68 –6.72 –5.51 –5.23 –3.99 –6.93 –10.10 –7.22 180° 185° 190° 195° 200° 205° –0.72 –0.90 –1.46 –2.29 –2.89 –2.39 –1.18 –1.41 –2.10 –3.05 –3.48 –2.46 –1.03 –1.31 –2.17 –3.31 –3.45 –1.82 –1.38 –1.67 –2.72 –4.14 –3.87 –1.84 –2.64 –3.04 –4.37 –5.72 –4.56 –2.36 –2.91 –3.47 –5.20 –6.49 –3.94 –1.58 –3.58 –4.32 –6.33 –6.71 –3.56 –1.98 –3.97 –4.75 –7.03 –6.90 –3.34 –2.11 –4.14 –5.04 –7.45 –6.79 –3.31 –2.51 –5.02 –6.00 –8.50 –7.39 –3.77 –3.75 –5.46 –6.47 –9.45 –7.53 –4.12 –4.49 –5.85 –7.06 –9.97 –7.26 –4.10 –4.93 210° 215° 220° 225° 230° 235° –1.04 0.00 0.04 –0.83 –1.42 –1.00 –0.92 –0.23 –0.78 –1.79 –1.67 –1.50 –0.34 –0.28 –1.44 –1.78 –1.31 –2.17 –0.71 –1.32 –2.36 –1.60 –1.81 –2.84 –1.72 –2.85 –2.99 –2.60 –3.94 –3.53 –1.61 –3.03 –2.81 –3.57 –4.03 –3.66 –3.05 –3.76 –3.67 –4.91 –4.58 –4.57 –3.74 –3.92 –4.30 –4.96 –5.21 –3.94 –4.43 –4.12 –4.87 –5.20 –5.73 –4.03 –5.74 –4.66 –6.13 –6.17 –6.09 –5.45 –5.86 –4.85 –6.69 –7.39 –5.55 –5.97 –5.44 –5.66 –7.52 –7.38 –5.81 –6.03 240° 245° 250° 255° 260° 265° –1.10 –1.97 –1.69 –0.92 –1.20 –1.30 –2.40 –2.42 –1.47 –1.84 –1.84 –1.22 –2.44 –1.34 –1.98 –1.66 –1.33 –1.69 –1.88 –2.72 –2.26 –1.71 –1.70 –1.62 –3.70 –3.57 –2.50 –2.99 –3.00 –3.37 –3.56 –2.66 –3.47 –3.25 –3.21 –2.35 –3.61 –4.20 –3.94 –4.01 –3.34 –3.27 –4.48 –3.97 –4.82 –3.62 –3.63 –3.70 –4.63 –4.71 –4.51 –3.91 –4.08 –3.70 –5.03 –6.39 –5.06 –4.73 –5.08 –4.50 –6.27 –6.12 –5.38 –5.91 –5.00 –4.96 –6.95 –5.97 –5.54 –5.33 –5.17 –5.44 270° 275° 280° 285° 290° 295° –0.76 –0.93 –1.15 –0.77 –0.59 –0.77 –1.59 –1.47 –1.12 –1.46 –1.20 –0.63 –1.12 –1.39 –1.33 –0.76 –0.86 –0.60 –2.30 –1.46 –1.04 –0.89 –0.98 –1.51 –2.33 –2.27 –2.10 –2.71 –1.70 –1.70 –2.45 –2.75 –1.94 –2.04 –1.86 –1.93 –3.19 –3.05 –2.60 –2.77 –2.51 –2.00 –3.33 –2.78 –3.20 –2.92 –2.24 –2.19 –3.06 –3.78 –3.33 –2.64 –2.56 –1.98 –4.76 –4.09 –3.82 –3.80 –2.96 –2.40 –4.66 –4.77 –4.62 –3.42 –3.12 –3.45 –5.41 –5.20 –3.84 –3.43 –3.69 –3.08 300° 305° 310° 315° 320° 325° –0.61 –0.17 0.00 –0.24 –0.38 –0.21 –0.80 –0.89 –0.39 –0.21 –0.50 –0.73 –0.28 –0.71 –0.63 0.00 0.13 –0.07 –0.60 –0.35 –0.48 –0.45 –0.65 –0.49 –1.58 –1.93 –1.31 –1.18 –1.08 –0.63 –1.39 –1.36 –1.14 –0.86 –0.21 –0.27 –1.95 –1.19 –1.25 –0.68 –1.16 –0.91 –1.60 –1.16 –1.37 –1.32 –0.59 –0.63 –1.38 –2.01 –1.25 –0.92 –0.89 –0.68 –3.08 –2.03 –2.10 –1.84 –1.33 –0.93 –2.57 –2.73 –1.93 –1.63 –1.86 –1.43 –2.65 –2.11 –2.14 –1.79 –1.08 –0.90 330° 335° 340° 345° 350° 355° 0.08 0.25 0.27 0.19 0.10 0.03 –0.51 –0.13 0.10 0.16 0.11 0.04 –0.07 0.06 0.13 0.12 0.06 0.02 0.05 0.37 0.37 0.24 0.11 0.05 –0.65 –0.83 –0.69 –0.36 –0.13 –0.02 –0.30 0.00 0.16 0.10 0.01 0.00 –0.24 –0.22 –0.34 –0.28 –0.13 –0.03 –0.56 –0.31 –0.26 –0.24 –0.14 –0.03 –0.48 –0.01 0.12 –0.03 –0.12 –0.06 –1.18 –1.10 –0.64 –0.28 –0.08 0.02 –0.68 –0.39 –0.46 –0.48 –0.29 –0.09 –0.70 –0.20 –0.15 –0.13 –0.02 0.03 BE171211.book Page 81 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 81 Table A.25 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189) measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.02 –0.04 –0.08 –0.29 –0.62 0.01 –0.04 –0.15 –0.27 –0.42 –0.77 0.01 –0.06 –0.24 –0.45 –0.48 –0.72 0.01 –0.04 –0.12 –0.16 –0.43 –0.78 0.01 –0.03 –0.18 –0.29 –0.33 –0.72 0.05 0.06 0.00 –0.28 –0.71 –1.06 0.00 –0.03 –0.26 –0.49 –0.86 –1.28 –0.01 –0.16 –0.23 –0.59 –0.83 –1.11 –0.09 –0.06 –0.30 –0.34 –0.87 –0.94 –0.01 –0.17 –0.32 –0.63 –0.89 –1.44 0.02 –0.12 –0.24 –0.45 –0.85 –1.25 30° 35° 40° 45° 50° 55° –0.83 –0.98 –1.36 –1.62 –2.05 –2.59 –0.98 –1.41 –1.75 –2.01 –2.55 –2.84 –1.23 –1.26 –1.73 –2.07 –2.34 –3.02 –1.24 –1.67 –2.44 –2.59 –3.04 –3.45 –0.80 –1.22 –1.50 –2.07 –2.95 –3.51 –1.42 –1.92 –2.25 –2.92 –3.08 –3.88 –1.54 –2.21 –2.57 –3.07 –3.50 –4.55 –1.71 –2.20 –2.86 –3.28 –4.18 –4.03 –1.50 –1.95 –2.64 –3.29 –4.56 –5.20 –2.07 –2.66 –3.16 –3.69 –4.52 –5.49 –1.90 –2.60 –3.47 –4.21 –4.81 –5.72 60° 65° 70° 75° 80° 85° –2.87 –3.64 –3.69 –4.29 –4.17 –4.99 –3.37 –3.84 –4.49 –4.66 –5.23 –5.30 –3.42 –3.87 –4.35 –5.09 –5.38 –5.76 –4.07 –4.69 –5.28 –5.51 –6.16 –6.72 –3.82 –4.28 –4.98 –5.79 –6.06 –6.34 –4.58 –5.24 –5.89 –6.62 –7.47 –7.78 –5.24 –5.85 –6.56 –7.25 –8.09 –8.57 –5.49 –6.74 –6.81 –7.94 –8.10 –8.75 –5.41 –6.24 –7.77 –8.08 –8.70 –8.98 –6.32 –6.91 –8.05 –9.09 –9.69 –10.50 –6.85 –7.88 –8.47 –9.33 –10.70 –11.26 90° 95° 100° 105° 110° 115° –5.13 –5.88 –6.16 –6.59 –6.59 –6.81 –6.19 –6.73 –6.38 –6.72 –6.77 –7.23 –6.28 –6.85 –8.06 –7.88 –8.03 –8.12 –6.96 –7.66 –8.01 –7.99 –8.18 –7.87 –7.32 –7.45 –7.79 –9.35 –9.28 –9.07 –8.04 –8.70 –9.23 –9.53 –9.54 –10.14 –9.08 –9.68 –10.11 –10.96 –11.88 –12.13 –9.75 –9.95 –9.80 –11.14 –10.89 –10.58 –10.19 –11.57 –11.90 –12.13 –13.06 –13.09 –10.84 –12.44 –12.58 –12.74 –13.69 –14.83 –12.29 –13.15 –13.79 –14.02 –14.67 –15.16 120° 125° 130° 135° 140° 145° –6.45 –7.04 –7.09 –7.19 –7.44 –6.17 –7.70 –8.54 –7.90 –7.44 –8.28 –7.81 –8.36 –7.98 –7.76 –8.23 –9.20 –8.52 –8.77 –8.91 –9.54 –9.61 –9.85 –9.94 –9.27 –9.91 –10.65 –9.22 –9.10 –9.82 –9.46 –10.36 –10.72 –10.11 –10.29 –11.37 –11.63 –11.49 –11.77 –12.06 –11.97 –13.16 –11.84 –12.30 –12.77 –14.25 –13.51 –12.92 –13.52 –12.33 –13.04 –13.91 –12.81 –13.42 –13.83 –13.83 –15.40 –14.87 –13.94 –14.35 –16.29 –15.14 –15.52 –16.09 –16.42 –16.92 150° 155° 160° 165° 170° 175° –5.59 –6.04 –4.44 –7.01 –10.86 –7.78 –5.81 –7.33 –5.04 –7.24 –12.34 –8.86 –6.24 –7.87 –5.79 –7.00 –12.88 –9.99 –7.40 –8.46 –6.98 –7.60 –13.14 –11.40 –8.09 –8.33 –7.42 –7.32 –12.91 –11.92 –9.82 –9.02 –9.05 –8.43 –13.37 –13.35 –11.29 –9.40 –10.59 –9.22 –14.43 –14.24 –11.31 –9.42 –11.52 –9.16 –16.42 –14.54 –12.15 –10.73 –12.40 –10.85 –15.94 –15.74 –15.16 –12.81 –13.50 –11.83 –15.44 –19.38 –16.89 –13.79 –13.72 –13.07 –15.92 –20.09 180° 185° 190° 195° 200° 205° –6.28 –7.62 –10.75 –7.18 –4.32 –5.58 –7.07 –8.57 –11.84 –7.39 –4.89 –6.79 –7.80 –9.34 –12.21 –7.11 –5.43 –7.72 –8.91 –10.57 –12.85 –7.91 –6.98 –8.93 –9.44 –11.28 –13.31 –7.89 –7.79 –8.91 –10.76 –12.91 –13.96 –9.13 –9.49 –9.53 –11.51 –13.44 –14.89 –10.11 –10.69 –9.86 –11.50 –14.78 –13.60 –10.67 –11.07 –10.56 –13.05 –16.88 –15.06 –10.84 –12.03 –10.74 –14.53 –17.36 –17.19 –12.45 –13.43 –12.59 –16.22 –19.99 –16.98 –13.47 –13.50 –14.28 210° 215° 220° 225° 230° 235° –5.78 –6.83 –7.82 –7.09 –6.49 –6.52 –6.34 –8.19 –8.93 –6.86 –7.12 –8.03 –7.16 –9.33 –9.41 –7.14 –7.22 –8.27 –8.38 –9.95 –9.28 –8.44 –8.69 –9.69 –9.10 –9.53 –8.25 –8.62 –10.23 –10.55 –10.37 –10.65 –9.53 –9.99 –10.95 –9.93 –11.15 –11.92 –10.98 –11.55 –12.22 –10.29 –10.62 –11.25 –11.49 –12.16 –12.03 –9.81 –12.04 –12.80 –11.40 –13.23 –11.24 –12.16 –13.95 –14.66 –14.13 –15.92 –14.19 –14.14 –16.53 –15.95 –16.21 –16.90 –14.62 –14.76 240° 245° 250° 255° 260° 265° –6.91 –6.36 –6.72 –5.93 –6.05 –5.63 –7.99 –6.98 –6.29 –6.24 –6.30 –6.45 –8.10 –8.00 –6.95 –7.20 –7.72 –6.91 –8.19 –7.02 –7.45 –8.35 –8.07 –6.72 –8.72 –8.17 –9.58 –8.72 –7.02 –6.70 –8.84 –9.67 –10.08 –9.26 –8.24 –8.71 –10.10 –11.66 –10.82 –9.78 –9.62 –8.98 –11.47 –11.83 –11.41 –11.00 –9.83 –9.19 –13.95 –12.35 –12.04 –11.61 –11.21 –9.87 –14.52 –13.65 –13.24 –12.60 –12.17 –11.98 –16.43 –14.68 –14.23 –13.35 –13.07 –12.84 270° 275° 280° 285° 290° 295° –5.42 –4.22 –3.75 –4.31 –3.74 –3.01 –5.49 –4.65 –5.27 –4.69 –3.86 –3.38 –5.32 –5.68 –5.45 –4.37 –3.98 –4.17 –6.75 –6.79 –5.50 –5.13 –5.77 –4.32 –7.66 –6.00 –5.49 –6.19 –4.37 –3.68 –7.58 –6.87 –7.48 –5.91 –5.24 –5.15 –8.24 –8.27 –7.39 –6.43 –6.13 –5.55 –9.72 –8.97 –7.91 –7.27 –6.28 –5.70 –9.97 –8.52 –8.15 –7.68 –6.71 –5.38 –10.67 –9.81 –9.59 –8.34 –7.52 –6.44 –11.39 –11.16 –10.09 –9.11 –8.53 –7.84 300° 305° 310° 315° 320° 325° –2.44 –2.63 –2.02 –1.43 –1.03 –0.70 –3.36 –2.76 –2.16 –1.53 –1.36 –1.50 –3.21 –2.36 –1.96 –2.14 –2.04 –1.10 –3.36 –3.41 –3.56 –2.47 –1.86 –1.39 –3.81 –3.62 –2.38 –1.77 –1.49 –1.53 –4.41 –3.14 –3.14 –2.84 –1.95 –1.25 –4.46 –4.13 –3.46 –2.72 –2.23 –2.11 –4.91 –4.07 –3.63 –3.29 –2.52 –1.94 –5.16 –4.31 –3.66 –2.94 –2.23 –1.66 –6.05 –5.27 –4.27 –3.34 –2.90 –2.25 –6.70 –5.36 –4.63 –3.98 –3.15 –2.45 330° 335° 340° 345° 350° 355° –0.52 –0.61 –0.54 –0.17 –0.01 0.01 –1.14 –0.79 –0.29 –0.17 –0.12 –0.02 –0.84 –0.25 –0.02 0.00 0.00 0.00 –1.20 –1.26 –0.97 –0.47 –0.19 –0.04 –0.68 –0.11 0.23 0.04 –0.09 –0.04 –1.22 –1.05 –0.98 –0.55 –0.22 –0.05 –1.58 –0.94 –0.52 –0.26 –0.06 –0.01 –1.25 –0.88 –0.80 –0.39 –0.02 0.04 –1.26 –0.83 –0.84 –0.39 –0.02 0.02 –1.70 –1.21 –0.88 –0.50 –0.25 –0.01 –1.79 –1.09 –0.58 –0.34 –0.14 0.11 BE171211.book Page 82 Thursday, May 27, 2004 1:01 PM 82 Hand-held Analyzer Type 2250 – Instruction Manual Table A.26 Sensitivity variations of Hand-held Analyzer Type 2250 (including Microphone Type 4189) at sound incidence angles within ±θ ° from the reference direction. Nominal Frequency Exact Frequency Max Variation ± 30° Max Variation Max Variation ± 90° ± 150° 500 Hz 630 Hz 501.187 Hz 630.957 Hz 0.06 0.10 0.36 0.26 0.50 0.59 800 Hz 1000 Hz 1250 Hz 794.328 Hz 1000 Hz 1258.93 Hz 0.06 0.05 0.07 0.42 0.47 0.28 0.60 0.89 1.12 1600 Hz 2000 Hz 2240 Hz 2500 Hz 1584.89 Hz 1995.26 Hz 2238.72 Hz 2511.89 Hz 0.17 0.31 0.16 0.36 0.77 0.86 1.01 1.07 1.18 1.47 1.60 1.77 2800 Hz 3150 Hz 3550 Hz 4000 Hz 2818.38 Hz 3162.28 Hz 3548.13 Hz 3981.07 Hz 0.14 0.50 0.22 0.27 0.89 1.26 1.36 1.62 1.91 1.80 1.99 2.29 4500 Hz 5000 Hz 5600 Hz 6300 Hz 4466.84 Hz 5011.87 Hz 5623.41 Hz 6309.57 Hz 0.67 0.41 0.38 0.84 2.05 1.52 2.68 2.92 2.60 2.77 3.42 4.24 7100 Hz 8000 Hz 8500 Hz 9000 Hz 7079.46 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz 0.59 0.48 0.66 0.73 2.91 3.48 3.64 3.98 4.56 5.31 5.67 6.35 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 1.23 0.88 0.82 0.88 4.77 5.23 5.76 5.59 6.91 7.54 8.10 8.16 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 1.15 1.24 1.55 1.03 6.20 6.29 7.02 7.89 9.41 9.94 10.71 11.34 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 1.59 1.59 1.76 1.59 8.10 9.09 10.02 10.28 13.30 13.17 14.80 15.72 19000 Hz 20000 Hz 18836.5 Hz 19952.6 Hz 2.08 2.07 11.44 12.40 17.84 18.15 BE171211.book Page 83 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 83 Table A.27 Influence of Windscreen UA 1650 on directional response of Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Windscreen UA 1650 fitted, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.00 0.02 –0.01 0.02 0.03 0.00 –0.03 0.00 0.00 0.02 –0.02 –0.01 –0.01 –0.01 0.00 –0.01 0.00 –0.01 –0.01 0.00 –0.01 –0.01 –0.01 –0.01 0.00 0.00 0.00 –0.01 –0.01 –0.02 0.00 0.00 0.00 0.00 0.00 –0.01 –0.01 –0.01 –0.01 –0.01 –0.02 –0.03 –0.01 –0.01 –0.01 –0.01 –0.02 –0.02 –0.01 –0.01 –0.01 –0.02 –0.02 –0.03 –0.02 –0.01 0.00 –0.01 –0.01 –0.01 –0.01 –0.01 –0.01 0.00 –0.01 –0.01 –0.02 –0.01 –0.01 –0.01 –0.02 –0.02 30° 35° 40° 45° 50° 55° 0.04 –0.04 0.00 –0.03 –0.02 0.01 –0.04 0.00 –0.03 –0.02 –0.02 –0.06 –0.02 –0.02 –0.03 –0.04 –0.04 –0.04 –0.01 –0.02 –0.02 –0.02 –0.03 –0.03 –0.02 –0.04 –0.04 –0.05 –0.06 –0.07 –0.02 –0.02 –0.03 –0.04 –0.05 –0.07 –0.04 –0.05 –0.07 –0.09 –0.10 –0.12 –0.03 –0.03 –0.04 –0.05 –0.07 –0.09 –0.04 –0.05 –0.06 –0.07 –0.08 –0.09 –0.01 –0.01 –0.01 –0.02 –0.02 –0.04 0.00 0.00 0.00 –0.01 0.00 0.00 –0.01 0.00 0.01 0.02 0.01 0.02 60° 65° 70° 75° 80° 85° –0.01 –0.01 0.02 0.00 –0.02 –0.01 –0.03 –0.04 –0.05 –0.05 –0.03 –0.05 –0.04 –0.05 –0.06 –0.06 –0.04 –0.05 –0.04 –0.04 –0.05 –0.06 –0.06 –0.07 –0.08 –0.08 –0.09 –0.10 –0.11 –0.11 –0.08 –0.10 –0.12 –0.13 –0.14 –0.15 –0.13 –0.14 –0.16 –0.18 –0.20 –0.23 –0.11 –0.13 –0.15 –0.16 –0.18 –0.19 –0.11 –0.12 –0.16 –0.18 –0.19 –0.21 –0.05 –0.06 –0.07 –0.09 –0.12 –0.14 0.00 –0.02 –0.03 –0.04 –0.05 –0.08 0.03 0.04 0.04 0.02 0.01 0.00 90° 95° 100° 105° 110° 115° 0.02 0.00 –0.07 –0.01 –0.01 –0.03 –0.05 –0.05 –0.03 –0.05 –0.05 –0.04 –0.06 –0.06 –0.07 –0.07 –0.06 –0.06 –0.07 –0.07 –0.07 –0.08 –0.08 –0.07 –0.12 –0.11 –0.12 –0.12 –0.12 –0.12 –0.16 –0.17 –0.18 –0.18 –0.18 –0.17 –0.24 –0.25 –0.25 –0.26 –0.26 –0.26 –0.22 –0.24 –0.25 –0.25 –0.25 –0.25 –0.23 –0.25 –0.26 –0.26 –0.25 –0.26 –0.15 –0.16 –0.19 –0.19 –0.19 –0.18 –0.10 –0.11 –0.13 –0.16 –0.16 –0.14 –0.03 –0.05 –0.06 –0.08 –0.10 –0.10 120° 125° 130° 135° 140° 145° –0.05 –0.01 –0.02 –0.01 –0.03 0.03 –0.05 –0.06 –0.06 –0.06 –0.06 –0.07 –0.07 –0.06 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.13 –0.13 –0.12 –0.12 –0.12 –0.11 –0.17 –0.17 –0.17 –0.16 –0.16 –0.17 –0.26 –0.26 –0.26 –0.25 –0.25 –0.24 –0.25 –0.24 –0.23 –0.22 –0.21 –0.22 –0.27 –0.26 –0.25 –0.24 –0.22 –0.22 –0.18 –0.18 –0.17 –0.15 –0.14 –0.14 –0.13 –0.13 –0.13 –0.11 –0.09 –0.08 –0.07 –0.06 –0.05 –0.04 –0.01 0.00 150° 155° 160° 165° 170° 175° –0.07 –0.03 –0.06 –0.01 –0.02 –0.01 –0.03 –0.05 –0.05 –0.06 –0.06 –0.05 –0.05 –0.06 –0.06 –0.06 –0.05 –0.05 –0.07 –0.07 –0.07 –0.08 –0.07 –0.08 –0.11 –0.11 –0.10 –0.09 –0.10 –0.10 –0.16 –0.16 –0.16 –0.15 –0.15 –0.15 –0.23 –0.22 –0.21 –0.20 –0.20 –0.20 –0.21 –0.20 –0.19 –0.18 –0.18 –0.18 –0.22 –0.21 –0.20 –0.19 –0.18 –0.18 –0.13 –0.12 –0.10 –0.09 –0.08 –0.08 –0.07 –0.06 –0.05 –0.04 –0.03 –0.02 0.01 0.02 0.03 0.05 0.07 0.07 180° 185° 190° 195° 200° 205° –0.05 –0.03 –0.04 –0.05 –0.04 –0.04 –0.04 –0.06 –0.05 –0.05 –0.04 –0.04 –0.05 –0.05 –0.06 –0.06 –0.05 –0.06 –0.07 –0.07 –0.08 –0.07 –0.07 –0.07 –0.10 –0.10 –0.09 –0.10 –0.10 –0.10 –0.15 –0.15 –0.15 –0.15 –0.15 –0.16 –0.20 –0.20 –0.20 –0.21 –0.21 –0.22 –0.17 –0.18 –0.18 –0.18 –0.19 –0.20 –0.18 –0.18 –0.18 –0.18 –0.19 –0.20 –0.08 –0.08 –0.08 –0.09 –0.10 –0.11 –0.02 –0.02 –0.03 –0.04 –0.05 –0.06 0.07 0.07 0.06 0.06 0.04 0.03 210° 215° 220° 225° 230° 235° –0.06 –0.01 –0.02 –0.03 –0.20 –0.01 –0.05 –0.04 –0.07 –0.04 0.03 –0.05 –0.05 –0.06 –0.05 –0.05 –0.06 –0.06 –0.06 –0.07 –0.06 –0.07 –0.06 –0.07 –0.10 –0.11 –0.11 –0.11 –0.12 –0.12 –0.16 –0.16 –0.16 –0.17 –0.16 –0.17 –0.22 –0.23 –0.23 –0.24 –0.24 –0.25 –0.21 –0.21 –0.21 –0.22 –0.23 –0.23 –0.20 –0.20 –0.21 –0.22 –0.24 –0.25 –0.12 –0.13 –0.15 –0.16 –0.17 –0.17 –0.07 –0.08 –0.09 –0.11 –0.13 –0.13 0.01 –0.01 –0.03 –0.05 –0.05 –0.06 240° 245° 250° 255° 260° 265° 0.01 0.01 0.01 –0.06 0.01 –0.02 –0.05 –0.07 –0.06 –0.01 –0.04 –0.05 –0.06 –0.05 –0.04 –0.04 –0.04 –0.05 –0.07 –0.07 –0.07 –0.07 –0.07 –0.07 –0.12 –0.12 –0.12 –0.12 –0.12 –0.11 –0.17 –0.17 –0.17 –0.17 –0.17 –0.16 –0.26 –0.26 –0.26 –0.25 –0.24 –0.24 –0.23 –0.23 –0.23 –0.23 –0.24 –0.23 –0.26 –0.26 –0.25 –0.25 –0.25 –0.24 –0.17 –0.18 –0.19 –0.20 –0.19 –0.15 –0.14 –0.16 –0.17 –0.16 –0.13 –0.11 –0.09 –0.12 –0.12 –0.09 –0.07 –0.05 270° 275° 280° 285° 290° 295° 0.00 0.02 0.08 –0.01 0.00 0.01 –0.05 –0.04 –0.07 –0.03 –0.03 –0.04 –0.03 –0.05 –0.04 –0.03 –0.04 –0.03 –0.07 –0.06 –0.05 –0.05 –0.04 –0.04 –0.11 –0.10 –0.10 –0.10 –0.09 –0.09 –0.16 –0.15 –0.14 –0.13 –0.11 –0.10 –0.23 –0.22 –0.20 –0.18 –0.15 –0.13 –0.21 –0.19 –0.16 –0.14 –0.13 –0.12 –0.22 –0.19 –0.17 –0.16 –0.14 –0.12 –0.13 –0.12 –0.11 –0.08 –0.06 –0.04 –0.11 –0.09 –0.05 –0.02 –0.02 –0.02 –0.02 0.01 0.01 0.02 0.03 0.04 300° 305° 310° 315° 320° 325° 0.01 0.00 0.10 0.01 0.00 0.04 –0.03 –0.03 –0.07 –0.02 –0.02 0.00 –0.02 –0.02 –0.04 –0.03 0.00 –0.01 –0.04 –0.03 –0.03 –0.02 –0.02 –0.01 –0.08 –0.07 –0.06 –0.05 –0.04 –0.03 –0.08 –0.06 –0.05 –0.04 –0.03 –0.02 –0.12 –0.11 –0.09 –0.07 –0.06 –0.04 –0.11 –0.08 –0.06 –0.03 –0.02 –0.02 –0.09 –0.08 –0.07 –0.05 –0.04 –0.03 –0.03 –0.02 –0.01 0.01 0.01 0.01 –0.01 0.00 0.01 0.01 0.00 0.01 0.04 0.04 0.04 0.05 0.04 0.02 330° 335° 340° 345° 350° 355° 0.05 0.00 0.04 0.03 0.05 0.03 –0.02 0.00 –0.01 0.00 0.01 0.01 0.00 0.00 0.01 0.02 0.01 0.01 –0.01 0.00 –0.01 0.00 0.01 0.00 –0.02 –0.01 –0.01 –0.01 0.01 0.00 –0.01 –0.01 –0.01 0.00 0.00 0.01 –0.02 –0.01 –0.01 0.00 0.00 0.01 –0.01 –0.01 0.00 0.01 0.01 0.01 –0.02 0.00 0.00 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.01 0.02 0.02 0.02 0.01 0.01 0.00 0.00 0.00 0.00 0.01 0.01 BE171211.book Page 84 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 84 Table A.28 Influence of Windscreen UA 1650 on directional response of Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Windscreen UA 1650 fitted, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° –0.02 –0.01 –0.01 –0.01 –0.02 –0.01 –0.02 –0.01 –0.01 –0.01 –0.02 –0.03 –0.02 –0.02 –0.02 –0.04 –0.07 –0.10 –0.01 –0.01 0.00 –0.01 –0.04 –0.05 –0.01 0.00 0.02 0.05 0.05 0.07 –0.01 –0.01 0.00 0.00 0.00 0.02 –0.01 –0.02 –0.03 –0.08 –0.15 –0.21 0.00 –0.01 –0.02 –0.07 –0.14 –0.23 –0.01 0.00 0.01 0.00 –0.04 –0.09 –0.01 0.00 0.03 0.06 0.10 0.12 10000 Hz 10600 Hz –0.01 –0.01 0.02 0.06 0.10 0.15 –0.01 –0.04 –0.05 –0.08 –0.12 –0.09 30° 35° 40° 45° 50° 55° 0.00 0.01 0.00 –0.01 –0.01 0.01 –0.04 –0.07 –0.10 –0.12 –0.11 –0.12 –0.12 –0.16 –0.21 –0.25 –0.29 –0.32 –0.06 –0.09 –0.14 –0.19 –0.22 –0.27 0.08 0.09 0.09 0.08 0.07 0.03 0.06 0.11 0.17 0.25 0.26 0.27 –0.24 –0.28 –0.30 –0.24 –0.19 –0.10 –0.31 –0.39 –0.46 –0.54 –0.52 –0.45 –0.16 –0.26 –0.39 –0.49 –0.57 –0.61 0.13 0.07 –0.02 –0.14 –0.26 –0.35 0.21 0.26 0.28 0.22 0.13 0.03 –0.02 0.04 0.13 0.17 0.19 0.13 60° 65° 70° 75° 80° 85° 0.03 0.03 0.03 0.04 0.03 0.01 –0.12 –0.11 –0.13 –0.13 –0.13 –0.13 –0.34 –0.35 –0.38 –0.40 –0.42 –0.45 –0.34 –0.38 –0.40 –0.43 –0.39 –0.46 –0.03 –0.04 –0.10 –0.12 –0.17 –0.16 0.26 0.22 0.17 0.09 0.07 0.03 –0.05 –0.02 –0.04 –0.14 –0.27 –0.35 –0.39 –0.31 –0.29 –0.32 –0.38 –0.48 –0.56 –0.51 –0.43 –0.42 –0.45 –0.51 –0.41 –0.38 –0.37 –0.29 –0.27 –0.32 –0.06 –0.12 –0.11 –0.06 0.02 0.08 0.04 –0.05 –0.12 –0.09 –0.02 0.06 90° 95° 100° 105° 110° 115° –0.01 –0.03 –0.07 –0.08 –0.10 –0.13 –0.15 –0.16 –0.21 –0.27 –0.30 –0.32 –0.46 –0.49 –0.52 –0.56 –0.63 –0.67 –0.51 –0.55 –0.57 –0.60 –0.69 –0.82 –0.22 –0.28 –0.29 –0.32 –0.33 –0.50 0.04 0.03 0.04 0.02 0.01 –0.04 –0.43 –0.45 –0.49 –0.49 –0.44 –0.49 –0.57 –0.60 –0.66 –0.74 –0.75 –0.78 –0.57 –0.61 –0.65 –0.72 –0.81 –0.84 –0.35 –0.39 –0.44 –0.49 –0.65 –0.69 –0.04 –0.08 –0.16 –0.24 –0.34 –0.44 0.09 –0.03 –0.13 –0.21 –0.29 –0.43 120° 125° 130° 135° 140° 145° –0.12 –0.08 –0.06 –0.04 –0.02 0.01 –0.34 –0.32 –0.26 –0.22 –0.21 –0.19 –0.69 –0.69 –0.65 –0.59 –0.55 –0.52 –0.86 –0.85 –0.83 –0.75 –0.69 –0.65 –0.56 –0.63 –0.55 –0.49 –0.51 –0.49 –0.17 –0.30 –0.29 –0.25 –0.17 –0.17 –0.57 –0.74 –0.73 –0.64 –0.54 –0.49 –0.92 –1.14 –1.19 –1.04 –0.89 –0.76 –0.98 –1.27 –1.41 –1.26 –1.03 –0.86 –0.77 –0.99 –1.28 –1.22 –0.95 –0.76 –0.45 –0.63 –1.00 –1.02 –0.82 –0.63 –0.45 –0.53 –0.91 –1.11 –0.95 –0.81 150° 155° 160° 165° 170° 175° 0.03 0.04 0.05 0.08 0.10 0.11 –0.16 –0.13 –0.11 –0.08 –0.06 –0.06 –0.50 –0.50 –0.48 –0.43 –0.40 –0.40 –0.61 –0.60 –0.57 –0.56 –0.53 –0.52 –0.42 –0.40 –0.39 –0.34 –0.32 –0.31 –0.18 –0.13 –0.11 –0.07 0.02 0.05 –0.47 –0.37 –0.31 –0.26 –0.18 –0.13 –0.71 –0.58 –0.52 –0.44 –0.36 –0.31 –0.77 –0.67 –0.58 –0.52 –0.45 –0.40 –0.66 –0.56 –0.48 –0.43 –0.37 –0.32 –0.57 –0.49 –0.42 –0.40 –0.29 –0.22 –0.73 –0.72 –0.56 –0.54 –0.45 –0.33 180° 185° 190° 195° 200° 205° 0.10 0.10 0.09 0.08 0.06 0.04 –0.06 –0.07 –0.08 –0.10 –0.12 –0.15 –0.40 –0.40 –0.42 –0.43 –0.43 –0.45 –0.53 –0.54 –0.55 –0.55 –0.57 –0.60 –0.31 –0.31 –0.32 –0.34 –0.38 –0.39 0.04 0.04 0.03 0.03 –0.03 –0.07 –0.12 –0.12 –0.13 –0.17 –0.25 –0.32 –0.32 –0.33 –0.35 –0.40 –0.49 –0.59 –0.41 –0.42 –0.43 –0.47 –0.58 –0.66 –0.33 –0.35 –0.36 –0.41 –0.51 –0.52 –0.24 –0.25 –0.22 –0.35 –0.41 –0.36 –0.31 –0.31 –0.31 –0.44 –0.53 –0.51 210° 215° 220° 225° 230° 235° 0.02 –0.01 –0.04 –0.05 –0.06 –0.10 –0.17 –0.21 –0.23 –0.26 –0.31 –0.35 –0.52 –0.57 –0.60 –0.61 –0.67 –0.72 –0.66 –0.69 –0.69 –0.73 –0.78 –0.83 –0.40 –0.43 –0.48 –0.47 –0.49 –0.61 –0.08 –0.08 –0.11 –0.15 –0.26 –0.16 –0.36 –0.45 –0.50 –0.62 –0.79 –0.73 –0.62 –0.77 –0.85 –1.10 –1.24 –1.23 –0.71 –0.87 –1.02 –1.37 –1.40 –1.27 –0.59 –0.71 –0.87 –1.22 –1.23 –0.88 –0.46 –0.49 –0.73 –0.88 –0.88 –0.45 –0.62 –0.62 –0.84 –0.95 –0.71 –0.29 240° 245° 250° 255° 260° 265° –0.14 –0.16 –0.14 –0.11 –0.09 –0.04 –0.36 –0.35 –0.33 –0.29 –0.23 –0.19 –0.75 –0.71 –0.64 –0.59 –0.53 –0.51 –0.86 –0.80 –0.69 –0.56 –0.56 –0.55 –0.52 –0.42 –0.26 –0.28 –0.26 –0.27 –0.07 0.07 0.08 0.05 0.05 0.12 –0.59 –0.52 –0.46 –0.56 –0.50 –0.46 –0.93 –0.85 –0.82 –0.78 –0.68 –0.62 –1.01 –0.91 –0.92 –0.80 –0.72 –0.69 –0.72 –0.73 –0.67 –0.53 –0.49 –0.45 –0.33 –0.39 –0.32 –0.24 –0.15 –0.08 –0.31 –0.32 –0.22 –0.16 –0.11 –0.08 270° 275° 280° 285° 290° 295° –0.01 0.00 0.01 0.02 0.02 0.03 –0.19 –0.18 –0.16 –0.14 –0.13 –0.12 –0.47 –0.42 –0.41 –0.38 –0.37 –0.36 –0.53 –0.50 –0.41 –0.41 –0.41 –0.37 –0.17 –0.15 –0.15 –0.10 –0.11 –0.03 0.06 0.11 0.05 0.15 0.15 0.25 –0.43 –0.35 –0.25 –0.14 –0.03 –0.03 –0.59 –0.50 –0.40 –0.32 –0.31 –0.33 –0.63 –0.56 –0.48 –0.46 –0.48 –0.55 –0.37 –0.36 –0.31 –0.31 –0.39 –0.40 –0.07 0.03 0.01 –0.07 –0.10 –0.09 0.08 0.08 0.00 –0.06 –0.09 –0.01 300° 305° 310° 315° 320° 325° 0.04 0.03 0.02 0.01 0.02 0.03 –0.12 –0.11 –0.10 –0.09 –0.07 –0.03 –0.34 –0.31 –0.27 –0.25 –0.22 –0.17 –0.32 –0.25 –0.22 –0.18 –0.10 –0.03 –0.02 0.04 0.07 0.11 0.14 0.13 0.29 0.32 0.27 0.27 0.19 0.13 –0.03 –0.11 –0.17 –0.21 –0.25 –0.25 –0.40 –0.46 –0.50 –0.49 –0.46 –0.37 –0.59 –0.61 –0.57 –0.49 –0.38 –0.28 –0.40 –0.36 –0.25 –0.13 –0.02 0.06 –0.03 0.07 0.17 0.25 0.29 0.28 0.09 0.16 0.23 0.23 0.15 0.09 330° 335° 340° 345° 350° 355° 0.02 0.01 0.00 0.00 0.00 0.01 0.00 0.01 0.01 0.01 0.01 0.02 –0.12 –0.08 –0.05 –0.03 0.00 0.02 –0.01 0.00 0.00 0.00 0.01 0.00 0.11 0.10 0.06 0.04 0.02 0.01 0.11 0.07 0.03 0.02 0.01 0.01 –0.23 –0.18 –0.11 –0.06 –0.02 0.01 –0.27 –0.21 –0.13 –0.06 –0.02 0.00 –0.16 –0.09 –0.04 –0.01 0.01 0.01 0.13 0.13 0.12 0.09 0.05 0.03 0.25 0.20 0.15 0.11 0.06 0.03 0.03 –0.02 –0.03 –0.01 0.00 0.02 BE171211.book Page 85 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 85 Table A.29 Influence of Windscreen UA 1650 on directional response of Hand-held Analyzer Type 2250 (including Microphone Type 4189), or Microphone Type 4189 only, with Windscreen UA 1650 fitted, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° –0.01 –0.03 –0.08 –0.16 –0.27 –0.39 –0.01 –0.02 –0.02 –0.03 –0.08 –0.17 –0.01 0.00 0.02 0.04 0.06 0.08 0.00 –0.01 –0.02 –0.03 –0.04 –0.04 –0.02 –0.05 –0.11 –0.17 –0.24 –0.24 –0.04 –0.06 –0.09 –0.13 –0.24 –0.41 –0.02 –0.02 0.02 0.08 0.09 0.08 –0.02 0.00 –0.04 –0.12 –0.16 –0.10 0.05 0.04 –0.01 –0.08 –0.26 –0.32 0.00 –0.02 0.00 –0.06 –0.17 –0.29 –0.01 –0.01 –0.05 –0.09 –0.17 –0.15 30° 35° 40° 45° 50° 55° –0.45 –0.48 –0.45 –0.39 –0.32 –0.30 –0.29 –0.43 –0.53 –0.56 –0.53 –0.48 0.07 –0.01 –0.12 –0.23 –0.30 –0.30 –0.04 –0.05 –0.08 –0.16 –0.27 –0.37 –0.20 –0.11 –0.04 –0.02 –0.05 –0.15 –0.53 –0.62 –0.58 –0.53 –0.49 –0.52 0.00 –0.13 –0.22 –0.22 –0.22 –0.27 –0.05 –0.03 –0.09 –0.22 –0.27 –0.33 –0.33 –0.29 –0.15 –0.10 –0.21 –0.40 –0.45 –0.51 –0.40 –0.25 –0.27 –0.47 –0.19 –0.24 –0.32 –0.34 –0.33 –0.33 60° 65° 70° 75° 80° 85° –0.35 –0.45 –0.54 –0.59 –0.53 –0.45 –0.47 –0.54 –0.66 –0.75 –0.77 –0.69 –0.30 –0.35 –0.42 –0.53 –0.62 –0.69 –0.36 –0.36 –0.45 –0.56 –0.66 –0.78 –0.27 –0.28 –0.21 –0.28 –0.43 –0.52 –0.61 –0.72 –0.74 –0.71 –0.80 –0.92 –0.34 –0.48 –0.58 –0.59 –0.63 –0.71 –0.35 –0.51 –0.60 –0.73 –0.68 –0.56 –0.47 –0.52 –0.63 –0.82 –0.93 –0.77 –0.64 –0.61 –0.65 –0.83 –0.92 –0.87 –0.45 –0.64 –0.72 –0.77 –0.77 –0.94 90° 95° 100° 105° 110° 115° –0.41 –0.49 –0.60 –0.64 –0.69 –0.73 –0.68 –0.72 –0.82 –0.81 –0.73 –0.71 –0.63 –0.62 –0.70 –0.63 –0.46 –0.44 –0.88 –0.71 –0.57 –0.64 –0.60 –0.56 –0.57 –0.54 –0.42 –0.40 –0.61 –0.76 –0.90 –0.86 –0.84 –1.01 –1.34 –1.51 –0.64 –0.45 –0.52 –0.87 –1.02 –1.01 –0.60 –0.59 –0.57 –0.73 –0.80 –0.46 –0.95 –1.25 –1.12 –0.91 –0.76 –1.04 –1.02 –1.36 –1.19 –0.70 –1.02 –1.62 –1.09 –0.85 –0.64 –0.59 –1.06 –1.59 120° 125° 130° 135° 140° 145° –0.73 –0.84 –1.24 –1.60 –1.51 –1.33 –0.77 –0.84 –1.28 –1.89 –1.72 –1.35 –0.58 –0.64 –0.89 –1.64 –1.55 –1.03 –0.73 –0.77 –0.85 –1.54 –1.73 –1.26 –0.86 –0.89 –0.84 –1.33 –1.82 –1.59 –1.34 –1.18 –1.07 –1.81 –2.65 –2.41 –0.79 –0.66 –0.63 –1.26 –2.78 –2.16 –0.56 –0.75 –0.62 –0.52 –2.44 –2.02 –1.60 –1.79 –1.45 –0.85 –1.88 –2.68 –1.93 –1.46 –0.95 –0.91 –2.80 –3.81 –1.04 –0.89 –1.06 –0.78 –0.77 –3.11 150° 155° 160° 165° 170° 175° –1.20 –1.16 –0.96 –0.83 –0.75 –0.59 –1.12 –0.98 –0.78 –0.61 –0.56 –0.41 –0.66 –0.50 –0.34 –0.22 –0.18 –0.10 –0.88 –0.78 –0.73 –0.62 –0.52 –0.47 –1.38 –1.31 –1.24 –1.04 –0.91 –0.74 –2.05 –1.84 –1.57 –1.26 –1.09 –0.86 –1.36 –0.90 –0.64 –0.40 –0.26 –0.12 –1.25 –0.90 –1.01 –0.84 –0.77 –0.64 –2.41 –2.31 –2.16 –1.91 –1.62 –1.32 –2.82 –2.05 –1.72 –1.28 –0.91 –0.68 –1.84 –1.15 –1.05 –1.02 –0.69 –0.35 180° 185° 190° 195° 200° 205° –0.55 –0.55 –0.58 –0.71 –0.87 –0.92 –0.35 –0.35 –0.39 –0.55 –0.68 –0.81 –0.08 –0.08 –0.11 –0.24 –0.32 –0.41 –0.48 –0.47 –0.46 –0.67 –0.66 –0.71 –0.75 –0.74 –0.79 –1.02 –1.05 –1.24 –0.83 –0.75 –0.88 –1.17 –1.24 –1.50 –0.06 0.10 –0.07 –0.25 –0.38 –0.62 –0.48 –0.46 –0.70 –0.84 –0.84 –0.86 –1.21 –1.12 –1.50 –1.77 –1.93 –2.05 –0.42 –0.30 –0.73 –0.87 –1.36 –1.64 –0.03 –0.12 –0.48 –0.71 –0.70 –0.83 210° 215° 220° 225° 230° 235° –1.05 –1.15 –1.46 –1.57 –1.12 –0.72 –1.00 –1.25 –1.78 –1.98 –1.30 –0.93 –0.58 –1.04 –1.56 –1.51 –0.70 –0.78 –0.76 –1.16 –1.66 –1.32 –0.61 –0.68 –1.24 –1.47 –1.67 –1.12 –0.65 –0.69 –1.80 –2.25 –2.52 –1.53 –1.02 –1.20 –1.09 –2.01 –2.60 –1.01 –0.73 –0.80 –1.21 –2.05 –2.10 –0.45 –0.66 –0.92 –2.28 –2.46 –1.74 –0.64 –1.03 –1.26 –2.32 –3.47 –2.73 –1.25 –1.27 –1.69 –1.48 –2.67 –0.11 –0.34 –1.09 –0.76 240° 245° 250° 255° 260° 265° –0.69 –0.75 –0.68 –0.62 –0.60 –0.48 –0.84 –0.79 –0.76 –0.83 –0.85 –0.74 –0.85 –0.62 –0.50 –0.64 –0.57 –0.49 –0.71 –0.58 –0.67 –0.63 –0.50 –0.53 –0.68 –0.60 –0.58 –0.37 –0.35 –0.40 –1.25 –1.29 –1.26 –1.00 –0.91 –0.85 –0.77 –0.80 –0.81 –0.72 –0.56 –0.54 –0.84 –0.58 –0.54 –0.54 –0.61 –0.81 –1.04 –0.86 –0.47 –0.46 –0.72 –0.87 –1.75 –1.61 –1.12 –0.86 –1.19 –1.26 –0.52 –0.68 –0.44 –0.83 –0.82 –0.74 270° 275° 280° 285° 290° 295° –0.44 –0.48 –0.52 –0.56 –0.50 –0.40 –0.66 –0.64 –0.70 –0.66 –0.57 –0.48 –0.47 –0.55 –0.52 –0.43 –0.38 –0.37 –0.65 –0.61 –0.51 –0.51 –0.51 –0.44 –0.36 –0.31 –0.35 –0.30 –0.25 –0.30 –0.81 –0.83 –0.74 –0.69 –0.68 –0.65 –0.68 –0.74 –0.59 –0.43 –0.45 –0.38 –0.81 –0.77 –0.61 –0.57 –0.43 –0.39 –0.75 –0.64 –0.64 –0.56 –0.46 –0.49 –0.89 –0.82 –0.87 –0.78 –0.64 –0.58 –0.66 –0.63 –0.57 –0.63 –0.57 –0.50 300° 305° 310° 315° 320° 325° –0.32 –0.26 –0.28 –0.36 –0.43 –0.47 –0.44 –0.48 –0.48 –0.54 –0.51 –0.41 –0.37 –0.36 –0.31 –0.23 –0.13 0.02 –0.42 –0.40 –0.29 –0.16 –0.09 –0.08 –0.27 –0.11 0.00 0.02 0.02 –0.05 –0.51 –0.40 –0.38 –0.45 –0.54 –0.56 –0.31 –0.28 –0.22 –0.22 –0.16 –0.10 –0.40 –0.29 –0.19 –0.13 –0.02 0.04 –0.49 –0.36 –0.21 –0.12 –0.15 –0.22 –0.57 –0.48 –0.27 –0.25 –0.35 –0.44 –0.44 –0.38 –0.36 –0.33 –0.28 –0.21 330° 335° 340° 345° 350° 355° –0.44 –0.36 –0.26 –0.16 –0.06 –0.01 –0.27 –0.15 –0.04 0.02 0.03 0.03 0.10 0.14 0.11 0.09 0.07 0.03 –0.06 –0.07 –0.07 –0.03 –0.01 0.00 –0.11 –0.12 –0.13 –0.10 –0.03 0.02 –0.47 –0.38 –0.19 –0.10 –0.03 0.03 0.04 0.16 0.19 0.19 0.14 0.07 0.06 –0.03 –0.04 –0.08 –0.02 0.03 –0.31 –0.32 –0.19 –0.15 –0.01 –0.04 –0.40 –0.29 –0.14 –0.07 0.00 0.01 –0.16 –0.12 –0.09 –0.04 –0.03 0.02 BE171211.book Page 86 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 86 Table A.30 Hz. Directional response for Microphone Type 4189 only, with Windscreen UA 1650 fitted, 500 Hz – 3550 Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.00 0.02 –0.01 0.02 0.04 0.01 –0.03 0.00 0.00 0.02 –0.02 –0.01 –0.01 –0.02 –0.01 –0.02 –0.01 –0.02 –0.01 –0.02 –0.02 –0.03 –0.02 –0.04 0.00 –0.01 –0.02 –0.02 –0.04 –0.06 0.00 0.00 –0.01 –0.01 –0.03 –0.05 –0.01 –0.01 –0.01 –0.02 –0.04 –0.06 –0.01 –0.02 –0.02 –0.03 –0.05 –0.06 –0.01 –0.02 –0.02 –0.04 –0.07 –0.10 –0.02 –0.02 –0.03 –0.05 –0.08 –0.13 –0.01 –0.01 –0.02 –0.04 –0.07 –0.11 –0.02 –0.02 –0.02 –0.04 –0.08 –0.11 30° 35° 40° 45° 50° 55° 0.05 –0.04 0.00 –0.03 –0.03 0.00 –0.03 0.00 –0.04 –0.04 –0.04 –0.08 –0.04 –0.04 –0.06 –0.07 –0.08 –0.10 –0.05 –0.06 –0.06 –0.08 –0.09 –0.10 –0.07 –0.10 –0.11 –0.13 –0.16 –0.18 –0.07 –0.09 –0.13 –0.16 –0.20 –0.25 –0.08 –0.11 –0.15 –0.19 –0.24 –0.28 –0.08 –0.10 –0.12 –0.15 –0.19 –0.25 –0.13 –0.17 –0.21 –0.24 –0.28 –0.31 –0.17 –0.21 –0.26 –0.31 –0.37 –0.43 –0.15 –0.20 –0.27 –0.34 –0.40 –0.47 –0.15 –0.19 –0.24 –0.30 –0.38 –0.47 60° 65° 70° 75° 80° 85° –0.03 –0.03 –0.01 –0.04 –0.06 –0.05 –0.07 –0.08 –0.09 –0.10 –0.09 –0.11 –0.10 –0.12 –0.13 –0.14 –0.13 –0.15 –0.12 –0.14 –0.16 –0.17 –0.18 –0.21 –0.21 –0.22 –0.25 –0.28 –0.30 –0.32 –0.28 –0.33 –0.36 –0.40 –0.43 –0.46 –0.33 –0.38 –0.43 –0.50 –0.55 –0.61 –0.30 –0.35 –0.40 –0.45 –0.51 –0.58 –0.36 –0.40 –0.47 –0.53 –0.58 –0.63 –0.48 –0.52 –0.56 –0.61 –0.66 –0.72 –0.54 –0.62 –0.69 –0.74 –0.78 –0.85 –0.54 –0.60 –0.69 –0.78 –0.85 –0.91 90° 95° 100° 105° 110° 115° –0.03 –0.05 –0.12 –0.06 –0.07 –0.09 –0.12 –0.12 –0.11 –0.13 –0.13 –0.12 –0.16 –0.17 –0.18 –0.18 –0.18 –0.18 –0.22 –0.22 –0.24 –0.25 –0.26 –0.25 –0.34 –0.35 –0.36 –0.38 –0.38 –0.38 –0.49 –0.51 –0.54 –0.56 –0.56 –0.57 –0.65 –0.69 –0.72 –0.75 –0.76 –0.78 –0.64 –0.69 –0.73 –0.76 –0.78 –0.81 –0.70 –0.76 –0.81 –0.85 –0.88 –0.91 –0.77 –0.82 –0.88 –0.93 –0.97 –0.99 –0.90 –0.94 –0.99 –1.06 –1.10 –1.12 –0.98 –1.04 –1.09 –1.14 –1.19 –1.23 120° 125° 130° 135° 140° 145° –0.11 –0.07 –0.08 –0.07 –0.08 –0.02 –0.14 –0.14 –0.14 –0.15 –0.14 –0.15 –0.19 –0.18 –0.19 –0.18 –0.18 –0.19 –0.25 –0.24 –0.25 –0.23 –0.22 –0.23 –0.39 –0.39 –0.37 –0.37 –0.36 –0.34 –0.57 –0.56 –0.55 –0.53 –0.52 –0.51 –0.78 –0.78 –0.77 –0.75 –0.72 –0.68 –0.82 –0.81 –0.79 –0.77 –0.73 –0.71 –0.94 –0.94 –0.92 –0.89 –0.85 –0.81 –1.02 –1.03 –1.02 –0.99 –0.95 –0.90 –1.13 –1.16 –1.17 –1.15 –1.10 –1.04 –1.24 –1.26 –1.27 –1.25 –1.20 –1.13 150° 155° 160° 165° 170° 175° –0.12 –0.08 –0.10 –0.05 –0.06 –0.05 –0.10 –0.12 –0.12 –0.13 –0.12 –0.11 –0.16 –0.16 –0.16 –0.16 –0.14 –0.14 –0.21 –0.21 –0.20 –0.20 –0.20 –0.20 –0.32 –0.31 –0.29 –0.28 –0.28 –0.27 –0.48 –0.46 –0.44 –0.43 –0.42 –0.42 –0.65 –0.61 –0.57 –0.55 –0.54 –0.52 –0.66 –0.62 –0.58 –0.55 –0.53 –0.51 –0.76 –0.71 –0.66 –0.62 –0.59 –0.57 –0.84 –0.78 –0.71 –0.66 –0.62 –0.61 –0.96 –0.90 –0.82 –0.76 –0.71 –0.68 –1.06 –0.98 –0.89 –0.81 –0.75 –0.71 180° 185° 190° 195° 200° 205° –0.09 –0.07 –0.09 –0.09 –0.09 –0.09 –0.10 –0.12 –0.11 –0.12 –0.11 –0.12 –0.14 –0.14 –0.15 –0.16 –0.15 –0.16 –0.19 –0.19 –0.19 –0.20 –0.20 –0.20 –0.28 –0.27 –0.28 –0.29 –0.29 –0.30 –0.41 –0.42 –0.42 –0.43 –0.45 –0.47 –0.52 –0.52 –0.54 –0.56 –0.58 –0.61 –0.50 –0.51 –0.52 –0.55 –0.58 –0.62 –0.57 –0.57 –0.59 –0.62 –0.66 –0.71 –0.60 –0.61 –0.63 –0.66 –0.71 –0.77 –0.67 –0.68 –0.71 –0.76 –0.82 –0.90 –0.71 –0.72 –0.76 –0.82 –0.90 –0.98 210° 215° 220° 225° 230° 235° –0.11 –0.06 –0.07 –0.08 –0.25 –0.07 –0.13 –0.11 –0.15 –0.13 –0.06 –0.13 –0.16 –0.17 –0.16 –0.17 –0.18 –0.18 –0.20 –0.22 –0.21 –0.22 –0.23 –0.24 –0.32 –0.33 –0.35 –0.36 –0.38 –0.38 –0.49 –0.50 –0.52 –0.54 –0.55 –0.56 –0.64 –0.68 –0.71 –0.74 –0.76 –0.78 –0.67 –0.70 –0.74 –0.77 –0.80 –0.82 –0.75 –0.79 –0.84 –0.88 –0.91 –0.94 –0.84 –0.90 –0.96 –1.01 –1.03 –1.04 –0.97 –1.04 –1.10 –1.16 –1.18 –1.18 –1.07 –1.17 –1.24 –1.29 –1.30 –1.29 240° 245° 250° 255° 260° 265° –0.05 –0.05 –0.05 –0.12 –0.04 –0.07 –0.14 –0.16 –0.15 –0.09 –0.12 –0.12 –0.19 –0.17 –0.16 –0.15 –0.15 –0.16 –0.23 –0.23 –0.24 –0.23 –0.22 –0.22 –0.39 –0.39 –0.38 –0.37 –0.37 –0.35 –0.57 –0.57 –0.57 –0.55 –0.54 –0.52 –0.79 –0.79 –0.78 –0.75 –0.72 –0.69 –0.81 –0.80 –0.78 –0.76 –0.74 –0.70 –0.94 –0.92 –0.90 –0.85 –0.81 –0.76 –1.02 –1.01 –0.98 –0.95 –0.89 –0.81 –1.17 –1.15 –1.12 –1.06 –0.98 –0.92 –1.28 –1.26 –1.21 –1.13 –1.08 –1.03 270° 275° 280° 285° 290° 295° –0.05 –0.02 0.04 –0.05 –0.03 –0.02 –0.12 –0.11 –0.12 –0.09 –0.08 –0.08 –0.14 –0.15 –0.13 –0.12 –0.12 –0.10 –0.21 –0.19 –0.17 –0.16 –0.13 –0.13 –0.33 –0.31 –0.29 –0.27 –0.25 –0.23 –0.50 –0.47 –0.44 –0.41 –0.37 –0.33 –0.65 –0.61 –0.55 –0.49 –0.42 –0.36 –0.64 –0.57 –0.49 –0.43 –0.38 –0.33 –0.69 –0.61 –0.54 –0.49 –0.44 –0.39 –0.73 –0.67 –0.63 –0.58 –0.54 –0.49 –0.88 –0.83 –0.77 –0.72 –0.69 –0.64 –0.97 –0.91 –0.87 –0.81 –0.72 –0.62 300° 305° 310° 315° 320° 325° –0.01 –0.01 0.09 0.01 0.00 0.05 –0.07 –0.05 –0.09 –0.04 –0.03 0.00 –0.08 –0.07 –0.08 –0.07 –0.03 –0.03 –0.11 –0.08 –0.08 –0.06 –0.04 –0.03 –0.20 –0.18 –0.16 –0.13 –0.10 –0.08 –0.29 –0.24 –0.20 –0.16 –0.13 –0.10 –0.31 –0.26 –0.22 –0.17 –0.13 –0.08 –0.27 –0.22 –0.17 –0.13 –0.11 –0.08 –0.34 –0.30 –0.27 –0.23 –0.20 –0.16 –0.46 –0.42 –0.37 –0.30 –0.25 –0.20 –0.56 –0.48 –0.40 –0.32 –0.25 –0.18 –0.52 –0.43 –0.34 –0.25 –0.20 –0.16 330° 335° 340° 345° 350° 355° 0.06 0.01 0.04 0.04 0.05 0.03 –0.02 0.01 0.00 0.00 0.01 0.02 –0.02 –0.01 0.00 0.01 0.01 0.01 –0.02 0.00 0.00 0.02 0.02 0.02 –0.06 –0.04 –0.02 –0.01 0.00 0.00 –0.07 –0.04 –0.03 –0.01 –0.01 0.01 –0.05 –0.03 –0.02 0.00 0.00 0.02 –0.06 –0.04 –0.03 –0.01 0.00 0.01 –0.13 –0.08 –0.06 –0.03 –0.01 0.00 –0.14 –0.09 –0.05 –0.02 0.00 0.01 –0.12 –0.07 –0.03 –0.01 0.01 0.02 –0.13 –0.09 –0.06 –0.02 0.00 0.02 BE171211.book Page 87 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables Table A.31 87 Directional response for Microphone Type 4189 only, with Windscreen UA 1650 fitted, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° –0.02 –0.02 –0.04 –0.06 –0.11 –0.16 –0.02 –0.02 –0.04 –0.08 –0.16 –0.26 –0.02 –0.02 –0.05 –0.08 –0.15 –0.25 –0.01 –0.02 –0.05 –0.11 –0.21 –0.31 –0.01 0.00 0.00 –0.01 –0.06 –0.12 –0.01 –0.01 –0.03 –0.10 –0.20 –0.34 –0.01 –0.02 –0.10 –0.23 –0.41 –0.61 0.00 –0.02 –0.07 –0.19 –0.35 –0.58 –0.01 –0.01 –0.08 –0.21 –0.42 –0.67 –0.01 –0.01 –0.02 –0.05 –0.12 –0.29 10000 Hz 10600 Hz –0.01 –0.03 –0.09 –0.18 –0.29 –0.42 –0.01 –0.05 –0.11 –0.19 –0.34 –0.52 30° 35° 40° 45° 50° 55° –0.21 –0.25 –0.33 –0.40 –0.49 –0.57 –0.37 –0.48 –0.60 –0.71 –0.79 –0.90 –0.38 –0.55 –0.75 –0.96 –1.17 –1.34 –0.39 –0.48 –0.58 –0.72 –0.90 –1.19 –0.23 –0.37 –0.55 –0.77 –0.92 –1.06 –0.48 –0.63 –0.73 –0.80 –0.95 –1.14 –0.76 –0.90 –1.04 –1.18 –1.42 –1.69 –0.86 –1.18 –1.47 –1.72 –1.83 –1.97 –0.93 –1.20 –1.54 –1.92 –2.32 –2.61 –0.55 –0.95 –1.37 –1.72 –2.05 –2.50 –0.49 –0.61 –0.88 –1.38 –1.91 –2.19 –0.75 –1.06 –1.27 –1.43 –1.81 –2.53 60° 65° 70° 75° 80° 85° –0.65 –0.74 –0.82 –0.89 –0.97 –1.06 –1.01 –1.13 –1.28 –1.40 –1.46 –1.52 –1.45 –1.55 –1.70 –1.92 –2.13 –2.30 –1.54 –1.76 –1.89 –1.96 –2.04 –2.30 –1.23 –1.46 –1.86 –2.21 –2.40 –2.44 –1.38 –1.58 –1.74 –2.03 –2.39 –2.78 –1.93 –2.12 –2.38 –2.75 –3.11 –3.38 –2.24 –2.52 –2.73 –2.95 –3.33 –3.82 –2.72 –2.96 –3.30 –3.53 –3.64 –4.00 –2.95 –3.19 –3.47 –3.92 –4.19 –4.19 –2.48 –2.97 –3.28 –3.53 –4.09 –4.43 –3.05 –3.29 –3.75 –4.06 –4.15 –4.67 90° 95° 100° 105° 110° 115° –1.13 –1.20 –1.29 –1.33 –1.38 –1.44 –1.59 –1.67 –1.77 –1.87 –1.93 –1.97 –2.37 –2.44 –2.52 –2.59 –2.70 –2.76 –2.58 –2.78 –2.87 –2.91 –3.01 –3.15 –2.57 –2.81 –3.01 –3.14 –3.19 –3.36 –2.97 –3.08 –3.19 –3.35 –3.47 –3.57 –3.70 –3.97 –4.22 –4.37 –4.41 –4.53 –4.18 –4.39 –4.64 –4.93 –5.07 –5.19 –4.55 –4.89 –5.06 –5.29 –5.55 –5.68 –4.47 –5.09 –5.46 –5.63 –5.97 –6.14 –4.46 –4.76 –5.38 –5.72 –5.97 –6.22 –5.10 –5.26 –5.74 –6.22 –6.51 –6.85 120° 125° 130° 135° 140° 145° –1.46 –1.46 –1.46 –1.46 –1.41 –1.33 –2.02 –2.03 –2.00 –1.97 –1.96 –1.88 –2.81 –2.84 –2.84 –2.82 –2.79 –2.72 –3.20 –3.21 –3.22 –3.18 –3.15 –3.08 –3.40 –3.46 –3.40 –3.39 –3.47 –3.46 –3.69 –3.78 –3.75 –3.74 –3.73 –3.80 –4.63 –4.76 –4.65 –4.51 –4.45 –4.47 –5.40 –5.62 –5.58 –5.32 –5.17 –5.12 –5.91 –6.21 –6.25 –5.97 –5.70 –5.58 –6.31 –6.59 –6.77 –6.55 –6.23 –6.08 –6.30 –6.56 –6.87 –6.68 –6.34 –6.20 –6.96 –7.12 –7.54 –7.54 –7.17 –7.03 150° 155° 160° 165° 170° 175° –1.23 –1.13 –1.03 –0.93 –0.85 –0.81 –1.77 –1.63 –1.49 –1.36 –1.27 –1.22 –2.61 –2.48 –2.33 –2.17 –2.04 –1.98 –2.94 –2.77 –2.58 –2.42 –2.27 –2.18 –3.30 –3.13 –2.92 –2.69 –2.52 –2.43 –3.78 –3.58 –3.34 –3.08 –2.81 –2.66 –4.46 –4.23 –3.93 –3.61 –3.31 –3.12 –5.11 –4.87 –4.56 –4.21 –3.87 –3.67 –5.54 –5.36 –5.03 –4.67 –4.33 –4.11 –6.02 –5.83 –5.50 –5.12 –4.77 –4.52 –6.20 –6.05 –5.71 –5.34 –4.90 –4.62 –7.04 –6.98 –6.54 –6.11 –5.65 –5.29 180° 185° 190° 195° 200° 205° –0.80 –0.82 –0.86 –0.94 –1.04 –1.15 –1.20 –1.24 –1.29 –1.38 –1.52 –1.66 –1.98 –2.00 –2.08 –2.19 –2.33 –2.49 –2.17 –2.22 –2.32 –2.45 –2.63 –2.82 –2.40 –2.44 –2.55 –2.72 –2.96 –3.15 –2.64 –2.69 –2.83 –3.01 –3.29 –3.54 –3.06 –3.11 –3.27 –3.53 –3.87 –4.20 –3.63 –3.70 –3.88 –4.18 –4.58 –4.96 –4.05 –4.13 –4.32 –4.66 –5.13 –5.50 –4.46 –4.55 –4.77 –5.15 –5.66 –5.96 –4.55 –4.65 –4.90 –5.42 –5.90 –6.09 –5.20 –5.32 –5.62 –6.18 –6.67 –6.84 210° 215° 220° 225° 230° 235° –1.26 –1.36 –1.46 –1.49 –1.50 –1.50 –1.80 –1.93 –2.01 –2.04 –2.06 –2.07 –2.68 –2.83 –2.88 –2.88 –2.89 –2.89 –3.01 –3.13 –3.15 –3.17 –3.17 –3.17 –3.30 –3.40 –3.46 –3.40 –3.36 –3.44 –3.69 –3.74 –3.76 –3.73 –3.79 –3.68 –4.40 –4.51 –4.49 –4.55 –4.74 –4.75 –5.15 –5.26 –5.22 –5.43 –5.61 –5.65 –5.63 –5.70 –5.75 –6.12 –6.20 –6.12 –6.06 –6.09 –6.21 –6.56 –6.63 –6.39 –6.18 –6.13 –6.32 –6.44 –6.54 –6.26 –6.95 –6.89 –7.03 –7.16 –7.12 –6.80 240° 245° 250° 255° 260° 265° –1.51 –1.48 –1.40 –1.33 –1.29 –1.21 –2.04 –1.97 –1.92 –1.85 –1.76 –1.70 –2.87 –2.79 –2.69 –2.61 –2.54 –2.49 –3.15 –3.08 –2.97 –2.87 –2.84 –2.71 –3.33 –3.25 –3.13 –3.11 –2.93 –2.72 –3.62 –3.53 –3.46 –3.32 –3.14 –3.00 –4.66 –4.56 –4.38 –4.34 –4.20 –3.99 –5.36 –5.23 –5.07 –4.91 –4.68 –4.36 –5.88 –5.72 –5.57 –5.33 –5.12 –4.87 –6.26 –6.08 –5.84 –5.64 –5.43 –5.00 –6.05 –5.86 –5.75 –5.63 –5.12 –4.57 –6.59 –6.45 –6.39 –6.04 –5.50 –5.25 270° 275° 280° 285° 290° 295° –1.14 –1.08 –1.00 –0.90 –0.79 –0.69 –1.64 –1.57 –1.46 –1.36 –1.23 –1.12 –2.38 –2.21 –2.05 –1.87 –1.71 –1.59 –2.50 –2.26 –2.04 –1.96 –1.89 –1.69 –2.49 –2.43 –2.38 –2.13 –1.80 –1.41 –3.01 –2.72 –2.36 –1.95 –1.79 –1.58 –3.62 –3.28 –3.07 –2.76 –2.28 –2.01 –4.08 –3.79 –3.36 –2.87 –2.63 –2.54 –4.52 –4.04 –3.58 –3.45 –3.38 –3.08 –4.45 –4.15 –4.08 –3.94 –3.53 –3.13 –4.36 –4.28 –4.01 –3.52 –3.15 –2.87 –4.96 –4.56 –4.16 –3.95 –3.69 –3.24 300° 305° 310° 315° 320° 325° –0.59 –0.51 –0.46 –0.40 –0.33 –0.26 –1.02 –0.91 –0.83 –0.71 –0.58 –0.44 –1.45 –1.30 –1.10 –0.91 –0.70 –0.53 –1.41 –1.10 –0.88 –0.72 –0.56 –0.44 –1.22 –1.06 –0.92 –0.70 –0.45 –0.28 –1.31 –1.00 –0.87 –0.77 –0.76 –0.68 –1.88 –1.76 –1.47 –1.14 –0.95 –0.84 –2.35 –1.99 –1.74 –1.62 –1.50 –1.23 –2.70 –2.52 –2.33 –1.99 –1.55 –1.17 –2.90 –2.55 –2.05 –1.62 –1.28 –0.96 –2.44 –2.04 –1.72 –1.36 –0.96 –0.66 –2.87 –2.44 –1.87 –1.48 –1.24 –0.96 330° 335° 340° 345° 350° 355° –0.21 –0.16 –0.12 –0.09 –0.06 –0.04 –0.31 –0.20 –0.12 –0.05 –0.01 0.02 –0.36 –0.24 –0.15 –0.10 –0.06 –0.03 –0.36 –0.28 –0.18 –0.11 –0.04 –0.01 –0.17 –0.08 –0.06 –0.04 –0.04 –0.03 –0.50 –0.34 –0.21 –0.10 –0.03 0.02 –0.77 –0.65 –0.48 –0.32 –0.17 –0.09 –0.90 –0.61 –0.36 –0.17 –0.05 0.01 –0.86 –0.63 –0.42 –0.24 –0.12 –0.04 –0.63 –0.38 –0.20 –0.10 –0.06 –0.03 –0.47 –0.34 –0.20 –0.08 0.00 0.04 –0.69 –0.47 –0.32 –0.20 –0.11 –0.06 BE171211.book Page 88 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 88 Table A.32 Directional response for Microphone Type 4189 only, with Windscreen UA 1650 fitted, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° –0.01 –0.05 –0.18 –0.40 –0.69 –1.03 –0.01 –0.04 –0.12 –0.23 –0.40 –0.66 –0.01 –0.03 –0.08 –0.18 –0.38 –0.70 0.00 –0.05 –0.17 –0.34 –0.57 –0.83 –0.02 –0.09 –0.27 –0.51 –0.79 –1.02 –0.04 –0.10 –0.18 –0.33 –0.62 –1.15 –0.02 –0.06 –0.11 –0.21 –0.48 –0.85 –0.02 –0.05 –0.21 –0.50 –0.83 –1.13 0.05 –0.02 –0.23 –0.55 –1.10 –1.56 0.00 –0.07 –0.20 –0.51 –0.94 –1.42 –0.01 –0.02 –0.22 –0.52 –0.96 –1.34 30° 35° 40° 45° 50° 55° –1.26 –1.47 –1.74 –2.16 –2.45 –2.64 –1.01 –1.53 –2.01 –2.32 –2.68 –3.21 –1.05 –1.40 –1.73 –2.23 –2.81 –3.21 –1.07 –1.43 –2.01 –2.61 –2.98 –3.55 –1.28 –1.63 –2.00 –2.33 –2.96 –3.68 –1.81 –2.41 –2.73 –3.23 –3.88 –4.35 –1.25 –1.68 –2.38 –3.10 –3.46 –4.18 –1.41 –1.82 –2.48 –3.14 –3.97 –4.88 –1.97 –2.46 –2.98 –3.42 –4.25 –5.15 –2.03 –2.81 –3.30 –3.66 –4.56 –5.33 –1.81 –2.57 –3.30 –4.10 –4.99 –5.73 60° 65° 70° 75° 80° 85° –3.25 –4.03 –4.36 –4.84 –5.27 –5.33 –3.59 –4.02 –4.74 –5.10 –5.52 –6.15 –3.72 –4.47 –5.04 –5.75 –6.12 –6.33 –4.15 –4.46 –5.17 –5.92 –6.60 –7.32 –4.13 –4.94 –5.44 –6.09 –6.86 –7.30 –5.14 –5.57 –6.14 –6.89 –7.69 –8.74 –4.93 –5.74 –6.59 –7.14 –7.88 –8.48 –5.40 –6.44 –6.93 –7.81 –8.50 –9.40 –6.05 –6.70 –7.80 –8.79 –9.61 –9.92 –6.58 –7.46 –8.45 –9.20 –10.02 –11.02 –6.84 –7.84 –8.74 –9.85 –10.82 –11.79 90° 95° 100° 105° 110° 115° –5.73 –6.18 –6.53 –6.92 –7.19 –7.51 –6.48 –6.71 –7.09 –7.58 –7.73 –7.94 –7.03 –7.61 –7.67 –7.99 –8.31 –8.37 –7.45 –7.98 –8.40 –8.39 –8.99 –9.17 –8.17 –8.27 –8.88 –9.14 –9.55 –10.36 –8.70 –9.42 –9.76 –10.59 –10.87 –11.66 –9.55 –9.37 –10.04 –11.03 –11.40 –11.61 –9.75 –10.67 –10.90 –11.58 –12.30 –11.96 –11.27 –12.16 –12.57 –12.75 –13.33 –13.84 –11.76 –13.08 –13.60 –13.38 –14.34 –15.42 –12.58 –13.27 –13.76 –14.36 –14.99 –16.53 120° 125° 130° 135° 140° 145° –7.64 –7.76 –8.26 –8.47 –8.09 –7.87 –8.26 –8.27 –8.80 –9.39 –8.82 –8.30 –8.87 –8.90 –9.04 –9.97 –9.54 –8.65 –9.55 –9.82 –9.64 –10.49 –10.56 –9.58 –10.44 –10.91 –10.65 –11.09 –11.64 –10.90 –11.66 –11.70 –11.80 –12.21 –13.16 –12.55 –12.06 –11.76 –12.17 –12.53 –13.99 –13.10 –12.72 –13.00 –13.08 –13.01 –14.78 –14.07 –14.74 –15.46 –15.03 –14.61 –15.46 –16.11 –15.92 –16.05 –15.54 –15.67 –17.22 –18.34 –15.88 –16.25 –16.57 –16.43 –16.30 –18.37 150° 155° 160° 165° 170° 175° –7.84 –7.76 –7.27 –6.72 –6.25 –5.84 –8.27 –8.22 –7.75 –7.08 –6.57 –6.15 –8.42 –8.45 –8.09 –7.45 –6.90 –6.51 –9.17 –9.32 –9.17 –8.57 –7.92 –7.49 –10.45 –10.58 –10.47 –9.77 –9.02 –8.42 –11.84 –11.75 –11.51 –10.72 –9.90 –9.18 –11.91 –11.58 –11.34 –10.58 –9.73 –9.07 –12.81 –12.61 –12.91 –12.18 –11.32 –10.62 –15.05 –15.01 –15.19 –14.46 –13.26 –12.31 –16.46 –15.43 –15.61 –14.86 –13.53 –12.53 –16.66 –15.33 –15.58 –15.60 –14.44 –13.37 180° 185° 190° 195° 200° 205° –5.73 –5.88 –6.25 –6.81 –7.30 –7.52 –6.02 –6.18 –6.56 –7.13 –7.60 –7.94 –6.40 –6.55 –6.89 –7.43 –7.92 –8.23 –7.38 –7.49 –7.82 –8.54 –9.02 –9.18 –8.26 –8.36 –8.82 –9.67 –10.22 –10.34 –8.96 –9.04 –9.68 –10.67 –11.10 –11.21 –8.83 –8.90 –9.69 –10.54 –10.90 –11.10 –10.30 –10.56 –11.42 –12.15 –12.44 –12.42 –12.00 –12.16 –13.10 –13.99 –14.59 –14.47 –12.00 –12.07 –13.08 –14.06 –14.88 –14.88 –12.79 –13.21 –14.53 –15.78 –15.76 –15.89 210° 215° 220° 225° 230° 235° –7.67 –7.67 –7.88 –8.16 –7.96 –7.51 –8.12 –8.21 –8.75 –9.17 –8.58 –8.14 –8.27 –8.57 –9.26 –9.41 –8.69 –8.72 –8.99 –9.40 –10.10 –9.91 –9.33 –9.24 –10.18 –10.51 –10.86 –10.60 –10.14 –10.03 –11.46 –11.94 –12.45 –11.74 –11.11 –11.30 –11.47 –12.45 –13.47 –11.96 –11.69 –11.69 –12.56 –13.76 –14.05 –12.63 –12.71 –12.97 –14.72 –15.30 –14.83 –13.99 –14.14 –14.60 –15.83 –17.22 –17.05 –15.52 –15.62 –15.94 –16.58 –18.31 –16.17 –16.31 –17.20 –16.51 240° 245° 250° 255° 260° 265° –7.28 –7.29 –7.06 –6.64 –6.37 –6.02 –8.00 –7.86 –7.58 –7.30 –6.95 –6.49 –8.66 –8.35 –8.00 –7.70 –7.29 –7.16 –9.20 –8.99 –8.59 –8.20 –7.97 –7.57 –10.08 –9.64 –9.19 –8.79 –8.43 –7.99 –11.23 –10.88 –10.49 –10.04 –9.57 –9.10 –11.55 –11.05 –10.83 –10.51 –9.89 –9.16 –12.62 –11.83 –11.69 –11.25 –10.73 –10.65 –13.77 –13.41 –12.68 –12.22 –11.88 –11.63 –15.46 –15.13 –14.42 –13.46 –13.46 –12.90 –15.93 –15.77 –14.93 –14.89 –14.57 –13.74 270° 275° 280° 285° 290° 295° –5.56 –5.30 –5.12 –4.70 –4.25 –3.79 –6.29 –5.95 –5.31 –4.91 –4.49 –3.89 –6.70 –6.05 –5.84 –5.44 –4.91 –4.48 –7.09 –6.92 –6.26 –5.75 –5.20 –4.40 –7.70 –6.89 –6.61 –6.04 –5.32 –5.04 –8.30 –8.30 –7.49 –6.61 –6.08 –5.29 –9.28 –8.39 –7.60 –6.97 –6.29 –5.66 –9.87 –9.43 –8.40 –7.54 –6.77 –6.28 –10.97 –9.75 –9.30 –8.50 –7.71 –6.68 –11.58 –11.05 –10.00 –9.33 –8.43 –7.58 –12.80 –11.99 –11.25 –10.18 –9.17 –8.40 300° 305° 310° 315° 320° 325° –3.16 –2.63 –2.34 –1.98 –1.68 –1.49 –3.53 –3.11 –2.58 –2.34 –2.03 –1.49 –3.67 –3.18 –2.85 –2.21 –1.68 –1.38 –4.20 –3.62 –2.88 –2.59 –2.10 –1.47 –4.06 –3.53 –3.02 –2.27 –1.87 –1.62 –4.97 –4.17 –3.64 –3.19 –2.69 –2.29 –4.81 –4.19 –3.46 –3.05 –2.37 –1.72 –5.51 –4.78 –3.99 –3.10 –2.41 –1.80 –6.14 –5.20 –4.33 –3.53 –3.06 –2.45 –6.63 –5.47 –4.66 –3.80 –3.31 –2.86 –7.37 –6.38 –5.47 –4.60 –3.63 –2.94 330° 335° 340° 345° 350° 355° –1.31 –1.03 –0.69 –0.37 –0.14 0.00 –0.96 –0.61 –0.38 –0.23 –0.12 –0.04 –1.10 –0.68 –0.34 –0.11 0.00 0.02 –1.04 –0.85 –0.65 –0.40 –0.19 –0.06 –1.26 –0.92 –0.66 –0.42 –0.17 –0.01 –1.74 –1.17 –0.62 –0.32 –0.13 0.00 –1.20 –0.74 –0.37 –0.13 –0.02 0.00 –1.37 –1.09 –0.72 –0.43 –0.16 0.00 –2.01 –1.64 –1.12 –0.67 –0.22 –0.07 –2.10 –1.49 –1.00 –0.60 –0.25 –0.05 –2.15 –1.56 –1.10 –0.65 –0.32 –0.07 BE171211.book Page 89 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 89 Table A.33 Sensitivity variations of Microphone Type 4189 only, with Windscreen UA 1650 fitted, at sound incidence angles within ±θ ° from the reference direction. Nominal Frequency Exact Frequency Max Variation ± 30° Max Variation Max Variation ± 90° ± 150° 500 Hz 630 Hz 501.187 Hz 630.957 Hz 0.07 0.06 0.15 0.15 0.35 0.18 800 Hz 1000 Hz 1250 Hz 794.328 Hz 1000 Hz 1258.93 Hz 0.05 0.07 0.07 0.17 0.25 0.34 0.21 0.28 0.40 1600 Hz 2000 Hz 2240 Hz 2500 Hz 1584.89 Hz 1995.26 Hz 2238.72 Hz 2511.89 Hz 0.08 0.10 0.09 0.15 0.51 0.67 0.66 0.71 0.58 0.81 0.83 0.96 2800 Hz 3150 Hz 3550 Hz 4000 Hz 2818.38 Hz 3162.28 Hz 3548.13 Hz 3981.07 Hz 0.19 0.17 0.17 0.23 0.79 0.92 1.00 1.15 1.06 1.20 1.31 1.53 4500 Hz 5000 Hz 5600 Hz 6300 Hz 4466.84 Hz 5011.87 Hz 5623.41 Hz 6309.57 Hz 0.39 0.40 0.40 0.24 1.67 2.40 2.59 2.58 2.09 2.91 3.24 3.47 7100 Hz 8000 Hz 8500 Hz 9000 Hz 7079.46 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz 0.52 0.79 0.91 0.94 3.02 3.71 4.19 4.56 3.82 4.77 5.67 6.26 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 0.63 0.53 0.77 1.31 4.48 4.50 5.11 5.73 6.78 6.91 7.56 8.48 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 1.03 1.12 1.08 1.30 6.50 7.05 7.45 8.19 9.40 9.99 10.56 11.66 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 1.86 1.27 1.42 2.06 8.79 9.57 9.88 11.32 13.20 14.02 14.79 16.16 19000 Hz 20000 Hz 18836.5 Hz 19952.6 Hz 2.11 2.15 11.77 12.81 18.34 18.38 BE171211.book Page 90 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 90 Table A.34 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the Hand-held Analyzer’s display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° –0.01 0.00 –0.02 –0.01 0.01 –0.02 –0.01 0.01 0.01 0.02 0.02 0.06 0.00 –0.01 0.00 –0.03 0.00 0.01 0.00 0.00 0.00 0.01 0.00 –0.01 0.00 0.00 0.00 –0.02 –0.03 –0.02 –0.03 –0.03 –0.02 –0.03 –0.05 –0.09 –0.01 –0.02 –0.05 –0.12 –0.18 –0.26 –0.01 0.01 0.03 0.05 0.09 0.11 –0.03 –0.05 –0.09 –0.16 –0.22 –0.27 –0.05 –0.03 –0.01 0.01 0.05 0.05 –0.02 –0.03 –0.08 –0.16 –0.28 –0.40 –0.01 –0.02 –0.04 –0.05 –0.01 0.07 30° 35° 40° 45° 50° 55° 0.03 –0.06 –0.03 –0.08 –0.10 –0.11 0.04 0.10 0.09 0.12 0.13 0.13 0.00 0.01 0.02 0.05 0.09 0.12 –0.03 –0.04 –0.06 –0.08 –0.11 –0.12 –0.01 0.00 0.04 0.09 0.13 0.16 –0.16 –0.26 –0.40 –0.55 –0.70 –0.81 –0.35 –0.40 –0.40 –0.36 –0.30 –0.28 0.08 0.00 –0.14 –0.31 –0.45 –0.47 –0.29 –0.24 –0.15 –0.09 –0.14 –0.33 0.00 –0.12 –0.29 –0.42 –0.44 –0.35 –0.49 –0.51 –0.45 –0.42 –0.49 –0.67 0.14 0.14 0.01 –0.19 –0.32 –0.29 60° 65° 70° 75° 80° 85° –0.16 –0.17 –0.21 –0.24 –0.29 –0.32 0.13 0.10 0.10 0.05 0.01 –0.04 0.18 0.20 0.25 0.27 0.29 0.28 –0.13 –0.11 –0.08 –0.02 0.06 0.12 0.17 0.16 0.11 0.05 0.01 0.02 –0.82 –0.77 –0.65 –0.54 –0.48 –0.49 –0.37 –0.57 –0.82 –1.01 –0.98 –0.79 –0.37 –0.27 –0.32 –0.57 –0.89 –1.04 –0.58 –0.70 –0.62 –0.50 –0.59 –0.94 –0.32 –0.45 –0.72 –0.87 –0.78 –0.69 –0.79 –0.77 –0.73 –0.91 –1.22 –1.29 –0.31 –0.47 –0.60 –0.56 –0.59 –0.91 90° 95° 100° 105° 110° 115° –0.33 –0.37 –0.47 –0.47 –0.50 –0.50 –0.10 –0.16 –0.20 –0.27 –0.32 –0.37 0.23 0.17 0.08 –0.01 –0.09 –0.17 0.18 0.20 0.17 0.09 –0.04 –0.18 0.08 0.19 0.31 0.39 0.40 0.33 –0.55 –0.61 –0.60 –0.52 –0.40 –0.30 –0.59 –0.51 –0.57 –0.69 –0.72 –0.61 –0.90 –0.60 –0.41 –0.43 –0.58 –0.66 –1.24 –1.12 –0.74 –0.47 –0.50 –0.69 –0.91 –1.29 –1.32 –0.87 –0.49 –0.51 –1.15 –1.27 –1.64 –1.67 –1.16 –0.74 –1.18 –1.10 –1.09 –1.41 –1.43 –0.84 120° 125° 130° 135° 140° 145° –0.52 –0.48 –0.47 –0.43 –0.41 –0.35 –0.41 –0.44 –0.44 –0.44 –0.42 –0.40 –0.25 –0.27 –0.28 –0.27 –0.22 –0.18 –0.34 –0.48 –0.57 –0.61 –0.59 –0.53 0.17 –0.02 –0.24 –0.41 –0.50 –0.52 –0.30 –0.42 –0.63 –0.87 –1.06 –1.17 –0.45 –0.38 –0.49 –0.74 –1.06 –1.30 –0.55 –0.36 –0.29 –0.45 –0.79 –1.16 –0.76 –0.60 –0.44 –0.46 –0.75 –1.16 –0.78 –0.84 –0.62 –0.44 –0.60 –1.04 –0.81 –1.11 –1.15 –0.91 –0.83 –1.15 –0.41 –0.58 –0.94 –0.85 –0.58 –0.66 150° 155° 160° 165° 170° 175° –0.37 –0.32 –0.30 –0.27 –0.26 –0.25 –0.35 –0.33 –0.30 –0.28 –0.27 –0.25 –0.11 –0.05 –0.01 0.02 0.06 0.08 –0.44 –0.33 –0.24 –0.15 –0.09 –0.06 –0.45 –0.35 –0.23 –0.13 –0.05 0.00 –1.15 –1.04 –0.90 –0.76 –0.65 –0.58 –1.37 –1.27 –1.06 –0.84 –0.65 –0.55 –1.34 –1.30 –1.08 –0.81 –0.60 –0.46 –1.45 –1.48 –1.27 –0.96 –0.67 –0.50 –1.50 –1.67 –1.47 –1.09 –0.73 –0.52 –1.68 –2.03 –1.94 –1.55 –1.13 –0.84 –1.19 –1.76 –1.85 –1.46 –0.93 –0.57 180° 185° 190° 195° 200° 205° –0.25 –0.24 –0.26 –0.29 –0.32 –0.35 –0.25 –0.27 –0.26 –0.29 –0.30 –0.33 0.07 0.07 0.04 0.01 –0.02 –0.08 –0.04 –0.06 –0.11 –0.16 –0.25 –0.35 0.01 –0.01 –0.07 –0.16 –0.28 –0.40 –0.56 –0.59 –0.67 –0.80 –0.94 –1.08 –0.51 –0.57 –0.70 –0.90 –1.13 –1.31 –0.42 –0.48 –0.65 –0.89 –1.16 –1.35 –0.45 –0.53 –0.74 –1.03 –1.34 –1.51 –0.46 –0.56 –0.82 –1.19 –1.55 –1.67 –0.77 –0.90 –1.22 –1.66 –2.02 –2.01 –0.47 –0.63 –1.04 –1.56 –1.91 –1.72 210° 215° 220° 225° 230° 235° –0.39 –0.38 –0.40 –0.44 –0.65 –0.45 –0.37 –0.41 –0.45 –0.45 –0.38 –0.46 –0.12 –0.21 –0.23 –0.27 –0.29 –0.28 –0.45 –0.53 –0.61 –0.62 –0.58 –0.50 –0.51 –0.56 –0.54 –0.43 –0.25 –0.02 –1.17 –1.15 –1.03 –0.82 –0.58 –0.39 –1.38 –1.26 –0.98 –0.66 –0.42 –0.36 –1.34 –1.10 –0.73 –0.40 –0.27 –0.36 –1.42 –1.05 –0.63 –0.38 –0.41 –0.62 –1.42 –0.93 –0.51 –0.42 –0.64 –0.86 –1.56 –1.01 –0.76 –0.93 –1.20 –1.14 –1.13 –0.64 –0.63 –0.94 –0.98 –0.62 240° 245° 250° 255° 260° 265° –0.44 –0.47 –0.46 –0.47 –0.37 –0.36 –0.44 –0.40 –0.35 –0.27 –0.24 –0.17 –0.26 –0.18 –0.09 –0.01 0.07 0.13 –0.36 –0.21 –0.06 0.07 0.14 0.17 0.20 0.35 0.42 0.41 0.32 0.19 –0.29 –0.32 –0.44 –0.57 –0.66 –0.65 –0.45 –0.63 –0.74 –0.71 –0.61 –0.56 –0.56 –0.68 –0.63 –0.49 –0.47 –0.65 –0.78 –0.72 –0.54 –0.52 –0.78 –1.14 –0.78 –0.56 –0.57 –0.95 –1.33 –1.26 –0.86 –0.84 –1.28 –1.70 –1.58 –1.25 –0.51 –0.98 –1.51 –1.41 –1.10 –1.16 270° 275° 280° 285° 290° 295° –0.29 –0.27 –0.15 –0.20 –0.16 –0.14 –0.13 –0.06 –0.05 0.02 0.06 0.07 0.20 0.22 0.24 0.24 0.20 0.18 0.15 0.11 0.04 –0.04 –0.09 –0.13 0.07 –0.01 –0.03 –0.01 0.04 0.08 –0.59 –0.51 –0.48 –0.52 –0.61 –0.72 –0.64 –0.82 –0.97 –0.96 –0.79 –0.55 –0.90 –1.03 –0.88 –0.60 –0.37 –0.32 –1.21 –0.92 –0.60 –0.51 –0.60 –0.66 –0.86 –0.67 –0.78 –0.85 –0.69 –0.42 –1.21 –1.34 –1.22 –0.91 –0.73 –0.76 –1.22 –0.92 –0.66 –0.64 –0.64 –0.46 300° 305° 310° 315° 320° 325° –0.10 –0.09 0.00 –0.04 –0.02 0.01 0.09 0.10 0.07 0.10 0.07 0.07 0.15 0.10 0.05 0.02 0.02 –0.01 –0.15 –0.14 –0.13 –0.11 –0.08 –0.05 0.12 0.12 0.09 0.07 0.04 0.00 –0.78 –0.76 –0.67 –0.52 –0.37 –0.24 –0.38 –0.30 –0.32 –0.37 –0.40 –0.38 –0.39 –0.45 –0.41 –0.28 –0.12 –0.01 –0.54 –0.31 –0.15 –0.09 –0.14 –0.20 –0.30 –0.33 –0.39 –0.33 –0.19 –0.03 –0.77 –0.63 –0.46 –0.39 –0.42 –0.47 –0.30 –0.31 –0.34 –0.23 –0.02 0.12 330° 335° 340° 345° 350° 355° 0.02 0.01 0.02 0.03 0.03 0.03 0.04 0.02 0.02 0.01 0.01 0.00 –0.02 –0.02 0.00 0.01 0.00 –0.01 –0.03 –0.02 –0.02 –0.01 0.00 0.00 –0.02 –0.02 –0.02 –0.02 –0.01 0.00 –0.13 –0.07 –0.02 0.00 0.01 0.03 –0.32 –0.24 –0.16 –0.09 –0.03 0.01 0.07 0.09 0.08 0.06 0.03 0.01 –0.24 –0.21 –0.16 –0.09 –0.03 0.02 0.08 0.13 0.13 0.10 0.08 0.05 –0.47 –0.38 –0.25 –0.14 –0.05 0.01 0.13 0.08 0.02 –0.01 –0.01 0.01 BE171211.book Page 91 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 91 Table A.35 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the Hand-held Analyzer’s display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° –0.02 0.00 0.04 0.10 0.18 0.20 –0.02 0.00 0.07 0.11 0.11 0.00 –0.02 0.00 0.04 0.06 0.05 –0.07 –0.01 –0.07 –0.09 –0.17 –0.23 –0.26 0.01 –0.07 –0.16 –0.33 –0.55 –0.59 –0.03 –0.06 –0.04 –0.04 –0.07 –0.25 –0.02 –0.10 –0.22 –0.41 –0.49 –0.47 0.02 –0.04 –0.10 –0.24 –0.35 –0.48 0.02 –0.02 –0.11 –0.28 –0.35 –0.44 0.00 –0.07 –0.16 –0.27 –0.33 –0.58 10000 Hz 10600 Hz –0.02 –0.08 –0.15 –0.28 –0.39 –0.44 –0.02 –0.07 –0.17 –0.34 –0.36 –0.23 30° 35° 40° 45° 50° 55° 0.09 –0.12 –0.30 –0.32 –0.28 –0.39 –0.27 –0.54 –0.61 –0.57 –0.65 –0.89 –0.31 –0.52 –0.50 –0.46 –0.67 –0.87 –0.29 –0.44 –0.63 –0.65 –0.76 –1.22 –0.39 –0.30 –0.79 –1.29 –1.33 –1.63 –0.42 –0.23 –0.31 –0.95 –0.72 –0.97 –0.68 –1.11 –1.09 –1.25 –1.49 –1.38 –0.79 –1.03 –1.24 –1.71 –1.69 –2.09 –0.76 –1.08 –1.35 –1.70 –2.09 –2.28 –1.09 –1.33 –1.59 –1.91 –2.29 –2.73 –0.54 –0.73 –1.21 –1.69 –2.01 –2.26 –0.44 –0.81 –0.94 –1.29 –1.80 –2.23 60° 65° 70° 75° 80° 85° –0.60 –0.64 –0.61 –0.76 –0.91 –0.91 –0.99 –1.05 –1.17 –1.27 –1.37 –1.43 –0.86 –1.03 –1.41 –1.57 –1.52 –1.62 –1.45 –1.59 –1.57 –1.41 –1.95 –2.32 –1.62 –1.78 –2.12 –2.25 –2.26 –2.46 –1.54 –1.63 –1.94 –2.01 –2.16 –2.63 –2.02 –2.00 –2.69 –2.82 –3.14 –3.41 –1.92 –2.51 –2.66 –3.22 –3.41 –3.70 –2.66 –2.67 –3.05 –3.44 –4.06 –4.09 –2.95 –3.47 –3.58 –3.81 –4.37 –4.91 –2.89 –3.09 –3.39 –3.75 –3.97 –4.70 –2.52 –3.12 –3.39 –3.58 –4.10 –4.37 90° 95° 100° 105° 110° 115° –1.13 –1.53 –1.52 –1.46 –1.74 –1.63 –1.62 –1.85 –2.16 –2.34 –2.21 –2.38 –1.70 –1.86 –2.34 –2.71 –2.74 –2.67 –2.42 –2.30 –2.21 –2.86 –3.66 –3.64 –3.12 –2.82 –3.08 –2.84 –3.95 –4.39 –2.43 –3.04 –2.75 –3.14 –2.88 –3.73 –3.61 –3.86 –4.24 –4.08 –4.21 –4.27 –3.83 –4.19 –4.61 –4.74 –4.26 –5.10 –4.35 –4.51 –4.93 –5.32 –5.03 –5.24 –4.82 –5.32 –5.44 –5.85 –5.92 –5.64 –5.10 –5.05 –5.41 –5.54 –6.16 –5.86 –5.13 –5.04 –5.27 –5.86 –6.22 –5.96 120° 125° 130° 135° 140° 145° –0.95 –0.58 –0.90 –1.22 –1.05 –0.86 –2.16 –1.33 –1.19 –1.71 –1.85 –1.54 –2.70 –2.21 –1.52 –1.63 –2.17 –2.11 –3.29 –2.94 –2.54 –2.24 –2.51 –2.71 –4.42 –3.78 –3.10 –2.76 –2.91 –3.83 –4.40 –4.48 –3.39 –2.71 –2.33 –2.89 –5.59 –5.75 –5.35 –3.82 –3.48 –3.55 –5.66 –6.32 –6.63 –4.47 –4.17 –3.88 –5.84 –7.42 –7.17 –5.73 –4.53 –4.51 –6.57 –7.89 –7.84 –7.14 –5.20 –5.29 –6.11 –7.35 –8.19 –7.53 –5.43 –5.45 –5.76 –7.10 –8.75 –7.81 –5.76 –5.71 150° 155° 160° 165° 170° 175° –1.18 –1.83 –2.16 –1.84 –1.23 –0.80 –1.66 –2.32 –2.81 –2.52 –1.81 –1.29 –1.94 –2.46 –3.16 –3.02 –2.21 –1.56 –2.50 –2.71 –3.52 –3.87 –3.14 –2.31 –3.71 –3.43 –4.02 –4.44 –3.71 –2.83 –3.73 –3.56 –4.02 –4.81 –4.07 –2.98 –4.60 –4.35 –4.49 –5.54 –5.13 –3.80 –5.04 –4.96 –4.76 –5.90 –5.73 –4.25 –5.21 –5.84 –5.32 –6.26 –6.36 –4.83 –5.56 –6.71 –6.08 –6.83 –7.26 –5.66 –5.45 –6.83 –6.16 –6.90 –7.71 –5.98 –5.71 –6.96 –6.63 –6.77 –7.98 –6.49 180° 185° 190° 195° 200° 205° –0.66 –0.85 –1.34 –1.91 –2.15 –1.77 –1.15 –1.42 –2.04 –2.74 –2.87 –2.20 –1.37 –1.69 –2.43 –3.12 –2.97 –2.22 –2.02 –2.38 –3.24 –3.89 –3.55 –2.93 –2.61 –3.20 –4.38 –4.93 –4.14 –3.45 –2.68 –3.34 –4.51 –4.60 –3.55 –3.35 –3.33 –4.06 –5.39 –5.26 –4.30 –4.55 –3.75 –4.64 –6.12 –5.63 –4.75 –5.18 –4.25 –5.25 –6.71 –6.05 –5.41 –6.00 –5.00 –6.16 –7.59 –6.72 –6.20 –6.74 –5.24 –6.53 –8.02 –6.70 –6.49 –6.48 –5.67 –6.98 –8.05 –6.61 –7.12 –6.45 210° 215° 220° 225° 230° 235° –1.15 –0.90 –1.15 –1.28 –0.89 –0.69 –1.55 –1.61 –2.03 –1.76 –1.25 –1.57 –1.96 –2.31 –2.24 –1.69 –1.75 –2.33 –3.05 –3.30 –2.70 –2.23 –2.40 –2.81 –3.60 –3.27 –2.68 –2.96 –3.24 –4.22 –3.73 –2.76 –2.57 –2.67 –3.68 –4.61 –4.32 –3.61 –3.52 –3.95 –5.84 –5.67 –4.94 –3.97 –4.25 –4.97 –6.89 –6.69 –5.03 –4.74 –4.51 –6.62 –7.16 –7.59 –5.38 –5.39 –5.24 –7.67 –8.02 –7.41 –5.55 –5.20 –5.76 –7.63 –8.42 –7.13 –5.96 –5.42 –6.35 –7.95 –8.80 –6.66 240° 245° 250° 255° 260° 265° –1.15 –1.71 –1.72 –1.53 –1.57 –1.52 –2.28 –2.31 –2.27 –2.44 –2.20 –1.93 –2.64 –2.79 –2.83 –2.79 –2.41 –1.85 –3.30 –3.76 –3.99 –2.94 –2.15 –2.21 –4.74 –4.38 –3.43 –2.92 –3.40 –3.06 –4.36 –3.57 –3.08 –3.01 –2.93 –2.83 –5.48 –4.32 –4.08 –4.32 –4.15 –3.95 –5.76 –5.17 –4.66 –4.93 –4.71 –4.32 –5.97 –5.24 –5.25 –5.62 –5.04 –4.62 –6.54 –5.72 –6.06 –5.78 –5.55 –5.34 –5.70 –6.01 –6.32 –5.65 –5.38 –5.06 –5.82 –6.08 –6.06 –6.02 –5.34 –5.32 270° 275° 280° 285° 290° 295° –1.18 –0.96 –0.91 –0.75 –0.61 –0.64 –1.67 –1.45 –1.36 –1.29 –1.21 –1.10 –1.70 –1.62 –1.66 –1.61 –1.38 –1.01 –2.50 –2.63 –1.96 –1.39 –1.61 –1.69 –2.89 –2.27 –2.63 –2.48 –2.16 –1.78 –2.67 –2.53 –2.18 –2.04 –1.98 –1.61 –3.54 –3.41 –3.23 –2.76 –2.59 –2.10 –4.06 –3.90 –3.55 –3.36 –2.85 –2.50 –4.58 –4.22 –4.11 –3.57 –3.09 –2.83 –4.86 –4.98 –4.47 –3.78 –3.65 –3.45 –5.30 –4.73 –3.96 –3.89 –3.42 –3.18 –5.00 –4.45 –4.25 –3.58 –3.49 –3.13 300° 305° 310° 315° 320° 325° –0.61 –0.39 –0.27 –0.30 –0.25 –0.07 –1.01 –0.85 –0.62 –0.55 –0.62 –0.55 –0.87 –0.93 –0.71 –0.49 –0.49 –0.42 –1.42 –1.05 –0.70 –0.80 –0.93 –0.60 –1.74 –1.69 –1.28 –1.30 –1.02 –0.60 –1.49 –0.89 –0.85 –0.87 –0.28 –0.24 –1.90 –1.43 –1.47 –1.24 –1.10 –1.01 –2.14 –2.12 –1.84 –1.75 –1.33 –1.14 –2.70 –2.44 –2.08 –1.77 –1.42 –1.15 –3.03 –2.69 –2.38 –1.94 –1.67 –1.39 –2.92 –2.33 –2.05 –1.78 –1.21 –0.84 –2.58 –2.33 –1.81 –1.34 –0.97 –0.82 330° 335° 340° 345° 350° 355° 0.11 0.20 0.18 0.12 0.06 0.03 –0.32 –0.06 0.07 0.09 0.05 0.04 –0.20 –0.01 0.07 0.06 0.03 0.03 –0.19 0.04 0.12 0.11 0.08 0.03 –0.53 –0.50 –0.32 –0.12 –0.01 0.01 –0.34 –0.20 –0.06 –0.02 0.00 0.03 –0.68 –0.51 –0.45 –0.32 –0.14 –0.01 –0.83 –0.58 –0.47 –0.33 –0.17 –0.07 –0.84 –0.53 –0.42 –0.33 –0.19 –0.08 –1.04 –0.59 –0.37 –0.24 –0.11 –0.03 –0.57 –0.45 –0.39 –0.25 –0.10 –0.02 –0.42 –0.25 –0.33 –0.28 –0.14 –0.03 BE171211.book Page 92 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 92 Table A.36 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the Hand-held Analyzer’s display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.07 –0.22 –0.49 –0.79 –0.99 –0.01 –0.09 –0.17 –0.32 –0.64 –1.03 0.01 –0.05 –0.10 –0.06 –0.05 –0.33 0.01 –0.05 –0.20 –0.52 –0.85 –1.06 –0.04 –0.13 –0.22 –0.23 –0.34 –0.53 –0.10 –0.14 –0.21 –0.54 –1.22 –1.53 –0.09 –0.17 –0.21 –0.35 –0.48 –0.96 –0.18 –0.41 –0.50 –0.53 –0.81 –1.24 0.00 –0.12 –0.15 –0.48 –0.76 –1.21 0.04 –0.05 –0.21 –0.37 –0.98 –1.59 0.07 –0.05 –0.19 –0.40 –0.73 –1.20 30° 35° 40° 45° 50° 55° –1.22 –1.46 –1.54 –1.94 –2.34 –2.64 –1.37 –1.97 –2.14 –2.49 –2.75 –3.19 –0.58 –1.16 –1.67 –2.30 –2.41 –2.83 –1.48 –1.69 –2.15 –2.75 –3.43 –3.83 –0.72 –1.27 –1.69 –1.99 –2.72 –3.54 –2.07 –2.20 –2.67 –3.32 –3.75 –4.30 –1.50 –2.28 –2.73 –3.16 –3.55 –4.43 –1.51 –1.87 –2.90 –3.56 –4.08 –4.67 –1.60 –1.77 –2.46 –3.14 –3.96 –4.75 –2.26 –2.81 –3.27 –3.69 –4.59 –5.84 –1.77 –2.51 –3.25 –3.89 –4.55 –5.55 60° 65° 70° 75° 80° 85° –3.33 –3.70 –4.24 –4.53 –4.57 –5.21 –3.71 –4.51 –4.86 –5.31 –5.77 –5.73 –3.57 –4.10 –4.65 –5.18 –5.79 –6.26 –4.20 –4.99 –5.72 –6.17 –6.76 –7.54 –4.00 –4.20 –5.04 –6.01 –6.41 –6.90 –5.26 –5.88 –6.07 –6.97 –8.23 –8.54 –5.11 –6.09 –6.94 –7.01 –8.21 –9.16 –6.00 –6.26 –7.48 –8.32 –8.51 –9.65 –5.29 –6.38 –7.02 –8.07 –8.94 –9.37 –6.47 –7.26 –8.42 –9.30 –10.45 –11.09 –6.80 –7.53 –8.50 –9.65 –10.74 –11.85 90° 95° 100° 105° 110° 115° –5.64 –6.59 –6.42 –6.59 –7.04 –7.18 –6.35 –6.99 –7.36 –7.42 –8.05 –8.33 –6.48 –7.21 –8.12 –7.68 –7.39 –7.95 –7.64 –7.90 –8.67 –9.33 –8.92 –9.56 –7.90 –8.02 –8.18 –9.41 –9.84 –9.36 –8.72 –9.56 –9.93 –10.36 –11.31 –11.43 –9.02 –9.53 –10.18 –10.95 –11.96 –12.46 –10.45 –10.56 –11.75 –12.18 –11.90 –12.68 –10.62 –11.47 –11.91 –11.77 –12.97 –12.98 –12.06 –13.16 –13.66 –13.63 –14.64 –15.49 –12.44 –13.25 –14.22 –13.73 –15.27 –15.96 120° 125° 130° 135° 140° 145° –6.87 –7.31 –9.25 –9.05 –7.31 –6.24 –7.40 –7.48 –9.81 –10.73 –8.87 –6.71 –7.81 –8.07 –10.21 –11.51 –9.20 –6.73 –10.05 –9.60 –10.13 –12.07 –10.90 –8.49 –9.61 –8.99 –9.77 –12.41 –11.87 –9.37 –11.54 –11.07 –11.94 –15.05 –14.52 –11.44 –12.20 –10.91 –11.04 –13.87 –15.02 –12.24 –13.22 –13.32 –11.89 –13.68 –15.45 –12.44 –13.79 –14.18 –12.52 –14.33 –17.55 –14.67 –16.44 –16.94 –14.36 –14.63 –20.61 –18.08 –15.50 –16.26 –15.53 –15.47 –18.84 –17.60 150° 155° 160° 165° 170° 175° –6.98 –7.56 –7.81 –7.40 –8.69 –7.34 –7.82 –8.06 –8.67 –7.72 –9.31 –8.13 –7.71 –7.71 –9.07 –7.79 –9.00 –8.29 –8.52 –9.37 –10.59 –9.57 –10.66 –9.84 –8.80 –9.71 –11.37 –10.15 –11.12 –10.68 –10.27 –11.90 –12.21 –11.91 –12.30 –12.23 –10.22 –11.87 –11.79 –12.00 –11.94 –12.80 –11.31 –12.91 –12.52 –13.08 –12.64 –14.09 –12.98 –14.30 –14.40 –15.13 –14.11 –15.23 –14.46 –14.36 –15.73 –16.64 –14.70 –17.34 –14.07 –13.90 –15.88 –17.12 –14.51 –17.19 180° 185° 190° 195° 200° 205° –6.48 –7.90 –8.61 –7.49 –8.14 –7.26 –7.18 –8.87 –9.23 –7.99 –8.83 –7.72 –7.31 –8.94 –9.04 –8.19 –9.07 –7.76 –8.88 –10.80 –10.71 –9.97 –10.32 –9.52 –9.50 –11.54 –10.58 –10.65 –10.71 –9.84 –10.88 –12.84 –11.94 –12.36 –11.50 –11.69 –11.21 –12.93 –11.45 –12.08 –11.18 –11.08 –13.00 –12.93 –12.34 –12.89 –12.56 –11.02 –14.95 –15.66 –13.40 –14.72 –14.54 –12.29 –15.08 –16.23 –14.63 –15.85 –15.71 –14.16 –16.36 –16.60 –15.27 –16.28 –16.20 –13.92 210° 215° 220° 225° 230° 235° –7.07 –6.06 –8.21 –9.70 –9.28 –7.00 –7.88 –7.01 –9.55 –11.39 –10.06 –7.73 –7.37 –7.43 –9.79 –11.43 –9.19 –8.39 –8.29 –9.13 –11.74 –12.02 –9.34 –9.20 –8.41 –9.72 –12.27 –12.44 –9.66 –9.03 –10.24 –11.60 –13.95 –13.67 –11.04 –10.91 –10.16 –12.55 –15.15 –13.08 –10.90 –11.40 –11.16 –13.87 –16.73 –12.76 –11.49 –12.46 –12.06 –15.05 –16.46 –12.32 –12.40 –14.25 –14.52 –17.94 –19.45 –14.49 –15.01 –16.31 –14.64 –18.75 –16.99 –14.00 –15.52 –16.52 240° 245° 250° 255° 260° 265° –6.91 –7.54 –7.33 –6.67 –6.50 –6.54 –7.58 –8.35 –8.13 –7.38 –7.84 –7.21 –8.95 –8.72 –7.69 –7.96 –7.98 –7.17 –10.00 –9.34 –8.89 –9.65 –8.65 –7.76 –9.38 –9.10 –9.66 –9.03 –7.83 –7.71 –11.16 –10.98 –11.08 –10.03 –9.76 –9.47 –11.80 –11.87 –11.12 –10.38 –9.75 –9.40 –12.38 –12.00 –11.16 –11.03 –10.52 –9.80 –13.81 –12.97 –12.11 –11.99 –11.15 –11.40 –16.23 –15.66 –14.86 –14.00 –14.00 –13.37 –15.26 –15.57 –14.95 –14.20 –14.19 –13.31 270° 275° 280° 285° 290° 295° –6.02 –5.45 –4.75 –4.71 –4.26 –3.81 –6.43 –5.75 –5.79 –5.38 –4.93 –4.51 –6.36 –6.27 –5.85 –5.15 –4.68 –4.30 –7.66 –7.52 –6.59 –6.20 –5.94 –5.11 –7.52 –6.54 –6.33 –6.08 –4.94 –4.18 –8.44 –8.26 –7.84 –6.66 –5.87 –5.81 –9.00 –8.89 –7.85 –6.75 –6.65 –5.78 –10.04 –9.00 –7.92 –8.04 –7.23 –6.21 –10.65 –9.23 –8.81 –8.00 –6.82 –6.30 –12.30 –11.24 –10.77 –9.58 –8.75 –7.46 –12.37 –12.01 –10.89 –10.17 –8.83 –8.04 300° 305° 310° 315° 320° 325° –3.47 –2.72 –2.37 –2.11 –1.54 –1.59 –3.88 –3.28 –2.77 –2.63 –2.24 –1.99 –3.79 –2.99 –2.59 –2.38 –1.79 –1.21 –4.30 –4.01 –3.48 –2.90 –2.28 –1.73 –4.07 –3.53 –2.67 –1.95 –1.66 –1.29 –5.07 –4.06 –3.51 –3.21 –2.55 –2.09 –4.90 –4.32 –3.52 –3.05 –2.54 –2.10 –5.59 –4.61 –3.87 –3.44 –2.63 –1.98 –5.27 –4.77 –3.95 –2.89 –2.21 –1.68 –6.91 –6.03 –4.95 –3.92 –3.52 –3.03 –7.29 –6.19 –5.17 –4.67 –3.68 –2.86 330° 335° 340° 345° 350° 355° –1.31 –1.06 –0.87 –0.51 –0.21 –0.06 –1.39 –1.06 –0.74 –0.32 –0.07 0.01 –0.70 –0.27 –0.05 –0.04 –0.05 –0.04 –1.59 –1.13 –0.92 –0.55 –0.19 –0.06 –0.66 –0.48 –0.22 –0.15 –0.12 –0.02 –1.86 –1.44 –1.05 –0.39 –0.03 0.05 –1.40 –0.77 –0.31 –0.13 0.03 0.12 –1.41 –1.07 –0.81 –0.55 –0.20 –0.17 –1.20 –0.98 –0.63 –0.29 –0.12 –0.07 –2.42 –1.74 –1.12 –0.55 –0.36 –0.07 –2.15 –1.63 –0.97 –0.63 –0.28 –0.12 BE171211.book Page 93 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 93 Table A.37 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.02 0.02 –0.02 0.02 0.03 –0.02 –0.03 –0.01 0.01 0.05 0.01 0.02 –0.01 –0.03 –0.01 –0.02 –0.02 –0.04 0.00 0.00 0.00 –0.01 –0.01 –0.04 0.00 0.00 –0.01 –0.01 –0.01 –0.03 –0.01 0.01 0.00 –0.02 –0.04 –0.11 –0.01 –0.01 –0.03 –0.08 –0.15 –0.25 –0.01 –0.01 0.02 0.04 0.08 0.11 –0.01 –0.03 –0.07 –0.15 –0.24 –0.36 –0.02 0.00 0.05 0.08 0.13 0.12 –0.01 –0.03 –0.08 –0.17 –0.29 –0.42 –0.01 –0.01 0.00 –0.01 0.00 0.05 30° 35° 40° 45° 50° 55° 0.05 –0.05 –0.04 –0.06 –0.08 –0.07 0.03 0.06 0.08 0.10 0.12 0.10 –0.04 –0.04 –0.02 0.01 0.04 0.08 –0.05 –0.09 –0.10 –0.15 –0.18 –0.20 0.00 0.00 0.06 0.11 0.14 0.16 –0.18 –0.30 –0.43 –0.58 –0.73 –0.83 –0.34 –0.42 –0.42 –0.38 –0.32 –0.30 0.12 0.06 –0.05 –0.22 –0.37 –0.41 –0.39 –0.35 –0.24 –0.11 –0.10 –0.28 0.09 –0.08 –0.32 –0.56 –0.63 –0.45 –0.47 –0.44 –0.31 –0.22 –0.32 –0.69 0.10 0.05 –0.15 –0.42 –0.53 –0.34 60° 65° 70° 75° 80° 85° –0.15 –0.13 –0.14 –0.18 –0.24 –0.26 0.13 0.11 0.09 0.05 0.05 –0.03 0.14 0.19 0.23 0.26 0.30 0.28 –0.21 –0.20 –0.16 –0.08 0.02 0.10 0.13 0.09 0.02 –0.05 –0.08 –0.05 –0.83 –0.77 –0.65 –0.55 –0.52 –0.57 –0.37 –0.56 –0.82 –1.04 –1.04 –0.90 –0.33 –0.25 –0.31 –0.54 –0.88 –1.05 –0.53 –0.67 –0.57 –0.45 –0.56 –0.95 –0.23 –0.28 –0.61 –0.84 –0.66 –0.52 –1.06 –1.04 –0.72 –0.71 –1.10 –1.21 –0.18 –0.43 –0.91 –0.91 –0.56 –0.75 90° 95° 100° 105° 110° 115° –0.26 –0.36 –0.44 –0.39 –0.43 –0.50 –0.09 –0.13 –0.19 –0.27 –0.33 –0.35 0.23 0.18 0.09 0.01 –0.08 –0.15 0.17 0.20 0.18 0.09 –0.04 –0.18 0.06 0.21 0.35 0.45 0.47 0.38 –0.67 –0.72 –0.68 –0.52 –0.33 –0.21 –0.75 –0.73 –0.81 –0.86 –0.74 –0.50 –0.93 –0.69 –0.59 –0.69 –0.79 –0.66 –1.28 –1.21 –0.89 –0.74 –0.84 –0.97 –0.85 –1.41 –1.44 –0.95 –0.71 –0.93 –0.94 –1.05 –1.71 –1.93 –1.33 –0.99 –1.19 –0.91 –0.83 –1.57 –1.84 –1.11 120° 125° 130° 135° 140° 145° –0.50 –0.45 –0.47 –0.45 –0.40 –0.34 –0.40 –0.44 –0.44 –0.42 –0.42 –0.40 –0.23 –0.27 –0.28 –0.27 –0.23 –0.19 –0.35 –0.48 –0.59 –0.62 –0.61 –0.55 0.20 –0.04 –0.27 –0.46 –0.56 –0.56 –0.20 –0.33 –0.58 –0.87 –1.11 –1.23 –0.26 –0.18 –0.32 –0.66 –1.07 –1.38 –0.32 –0.04 –0.02 –0.31 –0.77 –1.23 –0.77 –0.35 –0.07 –0.17 –0.62 –1.24 –1.07 –0.69 –0.16 0.01 –0.33 –1.03 –1.25 –1.38 –0.84 –0.27 –0.26 –0.92 –0.80 –1.17 –1.09 –0.30 0.13 –0.30 150° 155° 160° 165° 170° 175° –0.40 –0.33 –0.33 –0.25 –0.27 –0.22 –0.33 –0.32 –0.28 –0.26 –0.24 –0.23 –0.12 –0.06 –0.01 0.03 0.07 0.09 –0.45 –0.35 –0.25 –0.17 –0.10 –0.07 –0.48 –0.38 –0.25 –0.13 –0.05 0.01 –1.21 –1.10 –0.93 –0.78 –0.65 –0.57 –1.47 –1.36 –1.12 –0.88 –0.69 –0.57 –1.45 –1.39 –1.13 –0.83 –0.59 –0.43 –1.68 –1.70 –1.43 –1.05 –0.73 –0.53 –1.69 –1.91 –1.65 –1.20 –0.79 –0.53 –1.86 –2.42 –2.24 –1.67 –1.13 –0.78 –1.34 –2.26 –2.31 –1.71 –1.05 –0.61 180° 185° 190° 195° 200° 205° –0.25 –0.25 –0.28 –0.32 –0.32 –0.35 –0.21 –0.22 –0.23 –0.24 –0.27 –0.30 0.10 0.09 0.07 0.03 0.00 –0.05 –0.05 –0.06 –0.09 –0.15 –0.22 –0.33 0.03 0.03 –0.03 –0.12 –0.23 –0.36 –0.53 –0.55 –0.64 –0.77 –0.94 –1.12 –0.51 –0.56 –0.69 –0.90 –1.15 –1.40 –0.38 –0.43 –0.59 –0.85 –1.15 –1.42 –0.47 –0.53 –0.74 –1.07 –1.44 –1.73 –0.44 –0.53 –0.79 –1.20 –1.67 –1.94 –0.67 –0.78 –1.12 –1.65 –2.21 –2.41 –0.47 –0.61 –1.05 –1.72 –2.33 –2.25 210° 215° 220° 225° 230° 235° –0.40 –0.36 –0.42 –0.47 –0.64 –0.49 –0.32 –0.35 –0.41 –0.39 –0.34 –0.41 –0.09 –0.16 –0.21 –0.24 –0.26 –0.26 –0.43 –0.54 –0.61 –0.64 –0.61 –0.51 –0.49 –0.57 –0.57 –0.48 –0.29 –0.04 –1.26 –1.29 –1.17 –0.92 –0.60 –0.32 –1.54 –1.45 –1.11 –0.67 –0.28 –0.10 –1.49 –1.24 –0.74 –0.22 0.09 0.08 –1.69 –1.22 –0.58 –0.07 0.05 –0.22 –1.72 –1.01 –0.24 0.15 –0.01 –0.58 –1.87 –0.91 –0.18 –0.12 –0.69 –1.33 –1.30 –0.23 0.22 –0.17 –0.96 –1.17 240° 245° 250° 255° 260° 265° –0.47 –0.47 –0.45 –0.50 –0.39 –0.40 –0.40 –0.39 –0.34 –0.27 –0.21 –0.13 –0.23 –0.16 –0.06 0.01 0.13 0.20 –0.37 –0.19 –0.03 0.13 0.21 0.25 0.21 0.42 0.54 0.55 0.46 0.32 –0.13 –0.11 –0.23 –0.44 –0.63 –0.71 –0.15 –0.40 –0.69 –0.84 –0.81 –0.70 –0.21 –0.58 –0.77 –0.67 –0.55 –0.62 –0.68 –0.94 –0.85 –0.71 –0.85 –1.16 –1.01 –0.93 –0.74 –0.96 –1.38 –1.35 –1.32 –1.06 –1.31 –1.86 –1.67 –1.01 –0.89 –1.17 –1.83 –1.53 –0.82 –0.87 270° 275° 280° 285° 290° 295° –0.34 –0.27 –0.19 –0.24 –0.21 –0.13 –0.08 –0.03 0.01 0.07 0.12 0.10 0.29 0.31 0.34 0.33 0.31 0.27 0.23 0.19 0.11 0.02 –0.06 –0.13 0.16 0.03 –0.04 –0.04 0.01 0.08 –0.70 –0.61 –0.54 –0.53 –0.59 –0.69 –0.67 –0.79 –0.95 –0.98 –0.82 –0.56 –0.86 –1.02 –0.86 –0.51 –0.23 –0.16 –1.24 –0.89 –0.49 –0.38 –0.52 –0.65 –0.80 –0.47 –0.60 –0.80 –0.60 –0.24 –0.88 –1.19 –1.08 –0.64 –0.58 –0.83 –1.13 –0.72 –0.48 –0.74 –0.76 –0.44 300° 305° 310° 315° 320° 325° –0.14 –0.08 0.00 –0.05 –0.07 –0.02 0.14 0.14 0.10 0.12 0.13 0.12 0.24 0.18 0.12 0.08 0.08 0.04 –0.16 –0.16 –0.15 –0.12 –0.09 –0.05 0.13 0.16 0.15 0.13 0.09 0.06 –0.75 –0.74 –0.67 –0.54 –0.39 –0.25 –0.35 –0.26 –0.26 –0.32 –0.37 –0.36 –0.25 –0.36 –0.36 –0.22 –0.05 0.08 –0.53 –0.28 –0.07 –0.03 –0.12 –0.21 –0.12 –0.28 –0.42 –0.37 –0.21 –0.03 –0.89 –0.67 –0.42 –0.35 –0.40 –0.46 –0.28 –0.41 –0.45 –0.23 0.06 0.21 330° 335° 340° 345° 350° 355° 0.03 –0.03 0.01 0.01 0.03 –0.01 0.06 0.07 0.05 0.03 0.05 0.03 0.03 0.02 0.03 0.03 0.03 0.01 –0.03 –0.02 –0.01 0.00 0.01 0.01 0.04 0.01 0.01 0.00 0.01 0.00 –0.15 –0.08 –0.03 –0.01 0.01 0.02 –0.31 –0.25 –0.16 –0.09 –0.04 0.00 0.14 0.15 0.13 0.09 0.05 0.03 –0.26 –0.23 –0.17 –0.09 –0.02 0.02 0.08 0.11 0.10 0.07 0.04 0.02 –0.42 –0.31 –0.19 –0.08 –0.02 0.02 0.20 0.11 0.03 –0.01 –0.01 0.00 BE171211.book Page 94 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 94 Table A.38 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 10000 Hz 10600 Hz 0° 5° 10° 15° 20° 25° –0.02 –0.01 0.05 0.12 0.18 0.19 –0.02 0.00 0.08 0.13 0.09 –0.10 –0.02 0.02 0.07 0.09 0.07 –0.11 –0.01 –0.02 0.07 0.20 0.30 0.27 –0.01 –0.02 –0.04 –0.14 –0.31 –0.43 –0.02 0.00 0.04 0.09 0.10 –0.06 –0.01 –0.05 –0.10 –0.24 –0.49 –0.69 –0.01 –0.04 –0.09 –0.24 –0.49 –0.78 –0.01 0.01 –0.06 –0.21 –0.36 –0.48 –0.01 –0.08 –0.21 –0.35 –0.35 –0.41 –0.01 –0.05 –0.20 –0.43 –0.46 –0.35 0.00 –0.10 –0.27 –0.46 –0.51 –0.44 30° 35° 40° 45° 50° 55° 0.08 –0.18 –0.37 –0.28 –0.15 –0.35 –0.47 –0.79 –0.69 –0.43 –0.57 –1.03 –0.39 –0.52 –0.28 –0.28 –0.88 –1.04 –0.06 –0.51 –0.51 –0.49 –1.03 –1.09 –0.52 –0.81 –1.19 –1.13 –1.34 –1.76 –0.37 –0.46 –0.44 –0.85 –0.82 –0.94 –0.72 –1.00 –1.35 –1.10 –1.69 –1.58 –0.97 –1.18 –1.41 –1.74 –1.91 –1.95 –0.77 –1.24 –1.52 –1.53 –1.90 –2.41 –0.90 –1.23 –1.38 –2.12 –2.42 –2.58 –0.66 –0.89 –1.25 –1.78 –2.04 –2.69 –0.81 –0.98 –1.06 –1.40 –1.87 –2.32 60° 65° 70° 75° 80° 85° –0.75 –0.72 –0.49 –0.81 –1.33 –1.06 –1.04 –0.90 –1.40 –1.51 –1.21 –1.84 –0.68 –1.08 –1.43 –1.30 –1.72 –1.61 –1.09 –1.71 –1.17 –1.44 –1.86 –2.09 –1.61 –2.12 –2.03 –2.80 –2.20 –2.66 –1.33 –1.72 –1.77 –2.08 –2.14 –2.68 –2.26 –2.06 –2.73 –2.97 –3.02 –3.69 –2.36 –2.75 –2.75 –3.49 –3.66 –3.67 –2.27 –2.91 –3.11 –3.25 –4.01 –4.18 –3.18 –2.97 –3.70 –4.09 –4.19 –4.55 –2.63 –3.39 –3.30 –3.94 –4.32 –4.79 –3.01 –2.95 –3.67 –3.72 –4.42 –4.66 90° 95° 100° 105° 110° 115° –0.83 –1.35 –1.30 –1.06 –1.87 –2.16 –2.04 –1.43 –2.02 –2.13 –1.82 –2.76 –1.73 –2.52 –1.97 –2.21 –2.51 –2.08 –2.41 –2.11 –2.73 –2.63 –2.87 –3.20 –2.79 –3.31 –3.15 –3.74 –3.29 –3.93 –2.36 –2.90 –2.89 –3.24 –3.69 –3.11 –3.91 –3.55 –4.43 –4.25 –4.56 –5.06 –4.21 –4.58 –4.44 –4.88 –5.10 –5.42 –4.11 –4.50 –4.81 –5.18 –5.01 –5.80 –4.99 –5.32 –5.45 –5.42 –6.08 –6.17 –4.67 –5.08 –5.53 –5.70 –6.20 –6.03 –5.64 –5.31 –5.57 –5.59 –5.84 –6.73 120° 125° 130° 135° 140° 145° –1.22 –1.03 –1.50 –1.03 –0.13 –0.06 –2.72 –1.70 –1.85 –2.10 –1.22 –0.63 –3.33 –2.80 –1.72 –2.32 –2.05 –0.83 –2.66 –3.91 –2.85 –2.42 –2.99 –1.67 –3.98 –4.07 –4.55 –2.99 –3.71 –3.54 –3.79 –3.59 –4.69 –3.43 –2.66 –3.78 –4.40 –5.36 –4.98 –5.96 –3.65 –4.36 –5.64 –5.55 –6.00 –6.46 –4.82 –4.44 –6.02 –5.71 –6.65 –6.52 –5.83 –4.44 –6.54 –6.83 –7.11 –7.12 –7.22 –4.97 –7.01 –6.83 –6.86 –7.57 –7.61 –5.27 –6.94 –7.03 –7.07 –8.05 –7.97 –6.01 150° 155° 160° 165° 170° 175° –0.99 –2.28 –2.77 –2.20 –1.37 –0.80 –1.19 –2.61 –3.59 –3.14 –2.17 –1.47 –0.86 –2.36 –4.07 –3.94 –2.67 –1.73 –0.91 –2.05 –4.30 –5.08 –3.67 –2.38 –1.91 –2.22 –4.40 –6.16 –5.05 –3.53 –2.25 –1.75 –3.68 –5.92 –5.04 –3.43 –4.00 –2.49 –3.83 –6.97 –6.58 –4.44 –4.96 –3.13 –3.91 –7.22 –7.54 –5.16 –5.44 –3.56 –3.89 –7.29 –8.10 –5.50 –6.22 –4.51 –4.27 –7.80 –9.31 –6.41 –6.29 –5.09 –4.31 –7.68 –9.97 –6.94 –6.25 –5.96 –4.55 –7.47 –10.55 –7.55 180° 185° 190° 195° 200° 205° –0.61 –0.80 –1.37 –2.21 –2.83 –2.35 –1.24 –1.48 –2.18 –3.15 –3.60 –2.61 –1.44 –1.71 –2.59 –3.74 –3.88 –2.27 –1.90 –2.21 –3.27 –4.69 –4.45 –2.44 –2.95 –3.35 –4.69 –6.06 –4.95 –2.75 –2.87 –3.43 –5.16 –6.45 –3.98 –1.65 –3.70 –4.44 –6.46 –6.88 –3.80 –2.30 –4.29 –5.09 –7.38 –7.30 –3.83 –2.70 –4.55 –5.46 –7.88 –7.25 –3.89 –3.16 –5.35 –6.35 –8.86 –7.79 –4.28 –4.27 –5.70 –6.72 –9.68 –7.88 –4.53 –4.86 –6.16 –7.37 –10.28 –7.70 –4.62 –5.44 210° 215° 220° 225° 230° 235° –1.02 –0.01 0.00 –0.88 –1.49 –1.10 –1.10 –0.44 –1.01 –2.05 –1.98 –1.85 –0.85 –0.85 –2.03 –2.39 –1.98 –2.89 –1.36 –2.02 –3.05 –2.32 –2.60 –3.67 –2.12 –3.28 –3.47 –3.07 –4.43 –4.14 –1.69 –3.11 –2.92 –3.71 –4.28 –3.82 –3.40 –4.21 –4.17 –5.53 –5.37 –5.30 –4.36 –4.69 –5.15 –6.07 –6.45 –5.17 –5.14 –4.99 –5.89 –6.58 –7.13 –5.30 –6.33 –5.37 –7.01 –7.39 –7.31 –6.33 –6.32 –5.33 –7.42 –8.27 –6.43 –6.42 –6.06 –6.28 –8.36 –8.33 –6.52 –6.33 240° 245° 250° 255° 260° 265° –1.24 –2.13 –1.83 –1.03 –1.29 –1.35 –2.77 –2.76 –1.80 –2.13 –2.08 –1.42 –3.19 –2.05 –2.62 –2.25 –1.86 –2.20 –2.74 –3.52 –2.95 –2.28 –2.26 –2.17 –4.22 –3.98 –2.76 –3.27 –3.27 –3.64 –3.63 –2.60 –3.39 –3.20 –3.16 –2.24 –4.20 –4.72 –4.40 –4.57 –3.83 –3.73 –5.41 –4.83 –5.64 –4.41 –4.31 –4.32 –5.64 –5.62 –5.43 –4.71 –4.80 –4.39 –5.76 –7.11 –5.73 –5.26 –5.56 –4.95 –6.59 –6.51 –5.70 –6.15 –5.15 –5.04 –7.27 –6.29 –5.76 –5.48 –5.27 –5.52 270° 275° 280° 285° 290° 295° –0.77 –0.93 –1.14 –0.75 –0.57 –0.74 –1.78 –1.64 –1.28 –1.60 –1.33 –0.75 –1.59 –1.81 –1.74 –1.14 –1.23 –0.96 –2.83 –1.95 –1.45 –1.29 –1.40 –1.88 –2.50 –2.42 –2.25 –2.81 –1.80 –1.73 –2.39 –2.64 –1.89 –1.89 –1.71 –1.68 –3.62 –3.40 –2.86 –2.91 –2.54 –2.02 –3.93 –3.29 –3.59 –3.24 –2.56 –2.52 –3.70 –4.35 –3.81 –3.11 –3.05 –2.53 –5.13 –4.45 –4.13 –4.11 –3.35 –2.80 –4.73 –4.75 –4.61 –3.49 –3.22 –3.55 –5.32 –5.12 –3.84 –3.49 –3.78 –3.09 300° 305° 310° 315° 320° 325° –0.57 –0.13 0.01 –0.23 –0.36 –0.18 –0.92 –1.00 –0.50 –0.30 –0.57 –0.76 –0.61 –1.02 –0.91 –0.24 –0.09 –0.24 –0.92 –0.60 –0.70 –0.63 –0.74 –0.52 –1.60 –1.89 –1.24 –1.07 –0.94 –0.51 –1.10 –1.04 –0.87 –0.58 –0.02 –0.14 –1.98 –1.30 –1.42 –0.89 –1.40 –1.16 –2.00 –1.62 –1.87 –1.81 –1.05 –1.00 –1.97 –2.62 –1.82 –1.41 –1.27 –0.96 –3.48 –2.38 –2.35 –1.97 –1.34 –0.87 –2.60 –2.66 –1.76 –1.38 –1.57 –1.14 –2.56 –1.95 –1.91 –1.56 –0.93 –0.81 330° 335° 340° 345° 350° 355° 0.10 0.27 0.27 0.19 0.10 0.04 –0.51 –0.12 0.11 0.17 0.12 0.06 –0.20 –0.03 0.08 0.10 0.05 0.04 0.04 0.37 0.37 0.24 0.12 0.05 –0.54 –0.73 –0.62 –0.32 –0.11 –0.01 –0.19 0.07 0.19 0.11 0.01 0.01 –0.47 –0.40 –0.45 –0.34 –0.15 –0.02 –0.83 –0.53 –0.39 –0.30 –0.15 –0.03 –0.64 –0.10 0.08 –0.04 –0.11 –0.05 –1.05 –0.97 –0.52 –0.18 –0.02 0.04 –0.43 –0.19 –0.31 –0.37 –0.23 –0.06 –0.67 –0.22 –0.18 –0.14 –0.01 0.04 BE171211.book Page 95 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 95 Table A.39 Directional response for Hand-held Analyzer Type 2250 (including Microphone Type 4189), with Windscreen UA 1650 fitted and measured in a plane parallel to the long axis of Hand-held Analyzer, but perpendicular to the display, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.06 –0.12 –0.24 –0.56 –1.01 0.00 –0.06 –0.17 –0.30 –0.51 –0.94 0.00 –0.06 –0.22 –0.40 –0.42 –0.65 0.01 –0.05 –0.14 –0.20 –0.47 –0.82 –0.01 –0.08 –0.28 –0.47 –0.57 –0.96 0.00 0.00 –0.08 –0.41 –0.95 –1.47 –0.03 –0.05 –0.25 –0.41 –0.78 –1.20 –0.02 –0.16 –0.27 –0.71 –0.99 –1.21 –0.04 –0.01 –0.31 –0.41 –1.13 –1.25 0.00 –0.19 –0.32 –0.70 –1.06 –1.73 0.01 –0.12 –0.30 –0.55 –1.02 –1.40 30° 35° 40° 45° 50° 55° –1.27 –1.46 –1.80 –2.01 –2.37 –2.88 –1.27 –1.83 –2.28 –2.57 –3.08 –3.32 –1.16 –1.27 –1.85 –2.30 –2.64 –3.33 –1.27 –1.71 –2.52 –2.76 –3.31 –3.82 –1.00 –1.33 –1.54 –2.10 –2.99 –3.66 –1.96 –2.53 –2.83 –3.45 –3.57 –4.40 –1.54 –2.33 –2.79 –3.30 –3.72 –4.82 –1.77 –2.23 –2.94 –3.50 –4.45 –4.36 –1.83 –2.23 –2.79 –3.39 –4.77 –5.60 –2.52 –3.18 –3.55 –3.94 –4.79 –5.96 –2.09 –2.83 –3.80 –4.56 –5.14 –6.05 60° 65° 70° 75° 80° 85° –3.23 –4.09 –4.22 –4.87 –4.70 –5.44 –3.84 –4.38 –5.15 –5.41 –6.00 –5.99 –3.72 –4.22 –4.78 –5.62 –6.00 –6.45 –4.43 –5.05 –5.72 –6.07 –6.81 –7.50 –4.09 –4.56 –5.20 –6.07 –6.48 –6.86 –5.19 –5.96 –6.63 –7.34 –8.26 –8.70 –5.58 –6.33 –7.14 –7.84 –8.72 –9.28 –5.85 –7.25 –7.41 –8.66 –8.78 –9.31 –5.88 –6.76 –8.41 –8.90 –9.63 –9.75 –6.96 –7.53 –8.70 –9.92 –10.61 –11.37 –7.30 –8.52 –9.18 –10.11 –11.47 –12.20 90° 95° 100° 105° 110° 115° –5.54 –6.37 –6.76 –7.23 –7.28 –7.54 –6.87 –7.45 –7.21 –7.53 –7.50 –7.94 –6.91 –7.48 –8.77 –8.51 –8.49 –8.55 –7.84 –8.37 –8.58 –8.63 –8.78 –8.43 –7.88 –7.99 –8.21 –9.75 –9.89 –9.83 –8.94 –9.57 –10.07 –10.54 –10.89 –11.65 –9.72 –10.13 –10.63 –11.84 –12.90 –13.14 –10.34 –10.54 –10.37 –11.88 –11.69 –11.04 –11.14 –12.82 –13.02 –13.03 –13.83 –14.13 –11.86 –13.80 –13.77 –13.44 –14.71 –16.45 –13.38 –14.01 –14.43 –14.61 –15.72 –16.74 120° 125° 130° 135° 140° 145° –7.18 –7.88 –8.33 –8.79 –8.95 –7.50 –8.47 –9.38 –9.18 –9.33 –10.00 –9.15 –8.93 –8.63 –8.65 –9.87 –10.75 –9.55 –9.50 –9.68 –10.39 –11.15 –11.58 –11.20 –10.13 –10.80 –11.49 –10.55 –10.92 –11.41 –10.81 –11.54 –11.79 –11.92 –12.94 –13.79 –12.42 –12.14 –12.39 –13.31 –14.74 –15.32 –12.40 –13.05 –13.38 –14.78 –15.95 –14.95 –15.11 –14.12 –14.50 –14.76 –14.69 –16.10 –15.76 –15.30 –16.35 –15.78 –16.74 –18.16 –17.32 –16.03 –16.58 –16.87 –17.19 –20.03 150° 155° 160° 165° 170° 175° –6.79 –7.20 –5.40 –7.84 –11.61 –8.38 –6.93 –8.30 –5.82 –7.85 –12.89 –9.27 –6.90 –8.37 –6.14 –7.21 –13.05 –10.09 –8.28 –9.24 –7.70 –8.23 –13.66 –11.86 –9.47 –9.64 –8.66 –8.36 –13.81 –12.66 –11.87 –10.85 –10.62 –9.69 –14.46 –14.21 –12.65 –10.30 –11.23 –9.62 –14.70 –14.36 –12.56 –10.32 –12.54 –10.01 –17.19 –15.17 –14.56 –13.04 –14.56 –12.76 –17.56 –17.06 –17.98 –14.86 –15.22 –13.10 –16.35 –20.06 –18.73 –14.94 –14.77 –14.09 –16.61 –20.44 180° 185° 190° 195° 200° 205° –6.83 –8.16 –11.33 –7.89 –5.20 –6.50 –7.42 –8.92 –12.23 –7.93 –5.56 –7.60 –7.88 –9.42 –12.32 –7.35 –5.74 –8.13 –9.39 –11.04 –13.31 –8.59 –7.64 –9.64 –10.19 –12.02 –14.11 –8.91 –8.84 –10.15 –11.58 –13.66 –14.83 –10.30 –10.73 –11.03 –11.57 –13.34 –14.96 –10.37 –11.07 –10.49 –11.98 –15.23 –14.30 –11.51 –11.91 –11.42 –14.26 –18.00 –16.56 –12.61 –13.96 –12.79 –14.95 –17.66 –17.92 –13.31 –14.80 –14.23 –16.25 –20.12 –17.46 –14.19 –14.20 –15.11 210° 215° 220° 225° 230° 235° –6.83 –7.98 –9.29 –8.66 –7.61 –7.23 –7.34 –9.44 –10.71 –8.84 –8.42 –8.96 –7.74 –10.37 –10.98 –8.65 –7.92 –9.05 –9.14 –11.11 –10.94 –9.76 –9.30 –10.37 –10.33 –11.01 –9.92 –9.75 –10.88 –11.24 –12.17 –12.90 –12.04 –11.53 –11.97 –11.13 –12.24 –13.94 –13.58 –12.56 –12.95 –11.09 –11.83 –13.30 –13.58 –12.60 –12.69 –10.73 –14.32 –15.26 –13.13 –13.87 –12.27 –13.42 –16.27 –18.13 –16.86 –17.17 –15.46 –15.82 –18.02 –18.61 –16.33 –17.24 –15.71 –15.52 240° 245° 250° 255° 260° 265° –7.60 –7.10 –7.40 –6.55 –6.65 –6.11 –8.83 –7.77 –7.05 –7.06 –7.14 –7.19 –8.95 –8.62 –7.45 –7.84 –8.29 –7.40 –8.90 –7.60 –8.12 –8.98 –8.56 –7.26 –9.39 –8.77 –10.16 –9.09 –7.37 –7.10 –10.08 –10.96 –11.34 –10.26 –9.15 –9.56 –10.87 –12.46 –11.63 –10.50 –10.18 –9.52 –12.31 –12.41 –11.94 –11.54 –10.43 –10.00 –14.99 –13.21 –12.51 –12.06 –11.93 –10.74 –16.27 –15.26 –14.36 –13.46 –13.37 –13.24 –16.95 –15.36 –14.66 –14.18 –13.88 –13.58 270° 275° 280° 285° 290° 295° –5.86 –4.70 –4.27 –4.87 –4.24 –3.41 –6.15 –5.30 –5.96 –5.36 –4.44 –3.86 –5.79 –6.23 –5.97 –4.80 –4.36 –4.54 –7.41 –7.40 –6.01 –5.64 –6.28 –4.77 –8.02 –6.31 –5.84 –6.49 –4.63 –3.99 –8.38 –7.70 –8.21 –6.59 –5.92 –5.80 –8.92 –9.02 –7.98 –6.86 –6.57 –5.92 –10.53 –9.74 –8.52 –7.84 –6.70 –6.10 –10.72 –9.15 –8.79 –8.24 –7.18 –5.87 –11.56 –10.62 –10.46 –9.12 –8.16 –7.02 –12.05 –11.79 –10.66 –9.74 –9.10 –8.35 300° 305° 310° 315° 320° 325° –2.76 –2.90 –2.30 –1.78 –1.46 –1.17 –3.81 –3.23 –2.64 –2.07 –1.87 –1.90 –3.57 –2.71 –2.27 –2.37 –2.17 –1.08 –3.77 –3.81 –3.85 –2.63 –1.95 –1.47 –4.08 –3.73 –2.37 –1.75 –1.48 –1.58 –4.92 –3.54 –3.52 –3.29 –2.49 –1.81 –4.78 –4.40 –3.68 –2.94 –2.40 –2.21 –5.31 –4.35 –3.82 –3.42 –2.54 –1.89 –5.66 –4.68 –3.88 –3.06 –2.38 –1.88 –6.62 –5.75 –4.54 –3.60 –3.26 –2.69 –7.14 –5.73 –4.99 –4.31 –3.43 –2.66 330° 335° 340° 345° 350° 355° –0.95 –0.97 –0.80 –0.33 –0.08 0.00 –1.42 –0.94 –0.32 –0.16 –0.09 0.01 –0.75 –0.10 0.09 0.09 0.07 0.04 –1.26 –1.34 –1.04 –0.50 –0.20 –0.04 –0.79 –0.24 0.10 –0.06 –0.11 –0.02 –1.68 –1.43 –1.17 –0.65 –0.25 –0.03 –1.55 –0.78 –0.32 –0.07 0.08 0.06 –1.20 –0.90 –0.84 –0.47 –0.05 0.08 –1.57 –1.15 –1.03 –0.54 –0.03 –0.02 –2.11 –1.49 –1.02 –0.58 –0.24 0.00 –1.95 –1.21 –0.66 –0.38 –0.17 0.13 BE171211.book Page 96 Thursday, May 27, 2004 1:01 PM 96 Hand-held Analyzer Type 2250 – Instruction Manual Table A.40 Sensitivity variations of Hand-held Analyzer Type 2250 (including Microphone Type 4189) and Windscreen UA 1650 fitted, at sound incidence angles within ±θ ° from the reference direction. Nominal Frequency Exact Frequency Max Variation ± 30° Max Variation Max Variation ± 90° ± 150° 500 Hz 630 Hz 501.187 Hz 630.957 Hz 0.08 0.10 0.39 0.26 0.69 0.59 800 Hz 1000 Hz 1250 Hz 794.328 Hz 1000 Hz 1258.93 Hz 0.07 0.07 0.06 0.38 0.44 0.24 0.63 0.89 1.12 1600 Hz 2000 Hz 2240 Hz 2500 Hz 1584.89 Hz 1995.26 Hz 2238.72 Hz 2511.89 Hz 0.19 0.36 0.16 0.41 0.85 1.05 1.20 1.30 1.30 1.55 1.64 1.74 2800 Hz 3150 Hz 3550 Hz 4000 Hz 2818.38 Hz 3162.28 Hz 3548.13 Hz 3981.07 Hz 0.17 0.51 0.22 0.29 1.04 1.36 1.40 1.60 1.87 1.95 2.07 2.43 4500 Hz 5000 Hz 5600 Hz 6300 Hz 4466.84 Hz 5011.87 Hz 5623.41 Hz 6309.57 Hz 0.67 0.49 0.43 0.74 2.21 1.90 3.20 3.13 2.93 3.42 4.28 4.76 7100 Hz 8000 Hz 8500 Hz 9000 Hz 7079.46 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz 0.56 0.73 0.97 0.86 2.87 3.92 4.21 4.60 4.88 5.97 6.91 7.62 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 1.10 0.68 0.86 1.31 5.17 5.31 5.69 6.02 8.02 8.44 8.82 9.70 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 1.42 1.25 1.60 1.09 6.87 7.00 7.85 8.11 11.40 11.51 12.08 12.49 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 2.17 1.63 1.84 1.87 8.94 9.80 10.63 11.18 15.15 15.40 16.91 17.55 19000 Hz 20000 Hz 18836.5 Hz 19952.6 Hz 2.52 2.22 12.34 13.51 20.64 20.16 BE171211.book Page 97 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 97 Table A.41 Influence of Outdoor Microphone Kit UA 1404 on the directional response of Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.00 0.05 0.04 0.04 0.02 0.01 0.00 0.06 0.06 0.05 0.04 0.02 0.00 0.08 0.08 0.08 0.06 0.04 1000 Hz 0.00 0.02 0.01 0.02 0.00 0.00 1250 Hz 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 –0.01 –0.02 –0.03 –0.04 0.00 –0.01 –0.02 –0.04 –0.07 –0.11 0.00 0.00 –0.01 –0.04 –0.06 –0.09 0.00 –0.01 –0.02 –0.03 –0.04 –0.07 0.00 0.00 –0.01 –0.01 –0.01 0.00 0.00 –0.01 –0.02 –0.05 –0.08 –0.13 0.00 –0.01 –0.06 –0.13 –0.20 –0.28 30° 35° 40° 45° 50° 55° –0.03 –0.02 –0.03 –0.03 –0.02 –0.02 –0.03 –0.01 –0.02 –0.02 –0.02 –0.01 –0.02 0.01 –0.01 –0.01 0.00 0.00 0.00 –0.02 –0.05 –0.07 –0.09 –0.10 0.01 0.02 0.02 0.02 0.02 0.00 –0.06 –0.08 –0.10 –0.10 –0.09 –0.07 –0.14 –0.19 –0.23 –0.27 –0.31 –0.35 –0.12 –0.18 –0.24 –0.30 –0.36 –0.41 –0.11 –0.15 –0.20 –0.24 –0.28 –0.34 0.01 0.00 –0.02 –0.06 –0.10 –0.14 –0.18 –0.23 –0.24 –0.21 –0.16 –0.16 –0.32 –0.37 –0.41 –0.49 –0.57 –0.59 60° 65° 70° 75° 80° 85° –0.05 –0.02 –0.02 –0.02 –0.02 –0.03 –0.07 –0.02 –0.02 –0.02 –0.02 –0.03 –0.08 0.00 –0.01 –0.01 –0.01 –0.02 –0.10 –0.11 –0.11 –0.11 –0.11 –0.10 –0.02 –0.05 –0.06 –0.07 –0.09 –0.08 –0.05 –0.03 –0.01 –0.02 –0.05 –0.07 –0.39 –0.42 –0.41 –0.37 –0.30 –0.24 –0.46 –0.50 –0.55 –0.58 –0.57 –0.49 –0.42 –0.50 –0.54 –0.59 –0.64 –0.68 –0.17 –0.22 –0.30 –0.38 –0.43 –0.48 –0.20 –0.25 –0.26 –0.28 –0.37 –0.46 –0.52 –0.44 –0.45 –0.54 –0.53 –0.53 90° 95° 100° 105° 110° 115° –0.05 –0.04 –0.04 –0.05 –0.06 –0.06 –0.07 –0.03 –0.04 –0.06 –0.06 –0.07 –0.08 –0.03 –0.04 –0.06 –0.06 –0.08 –0.10 –0.10 –0.10 –0.11 –0.12 –0.13 –0.07 –0.05 –0.02 –0.01 –0.01 –0.02 –0.09 –0.09 –0.06 –0.01 0.03 0.07 –0.22 –0.24 –0.28 –0.29 –0.24 –0.15 –0.38 –0.32 –0.34 –0.39 –0.41 –0.33 –0.62 –0.48 –0.36 –0.36 –0.44 –0.46 –0.54 –0.55 –0.39 –0.21 –0.20 –0.31 –0.49 –0.55 –0.62 –0.48 –0.22 –0.18 –0.64 –0.73 –0.72 –0.79 –0.71 –0.35 120° 125° 130° 135° 140° 145° –0.07 –0.08 –0.08 –0.08 –0.07 –0.05 –0.10 –0.09 –0.09 –0.09 –0.07 –0.05 –0.13 –0.09 –0.10 –0.09 –0.08 –0.05 –0.15 –0.17 –0.17 –0.18 –0.16 –0.13 –0.05 –0.08 –0.10 –0.12 –0.11 –0.08 0.07 0.05 0.00 –0.05 –0.07 –0.05 –0.06 –0.01 –0.03 –0.10 –0.18 –0.20 –0.20 –0.08 –0.04 –0.11 –0.22 –0.28 –0.33 –0.13 0.00 –0.01 –0.15 –0.28 –0.32 –0.13 0.15 0.27 0.16 –0.04 –0.35 –0.34 –0.01 0.35 0.40 0.15 –0.27 –0.50 –0.43 0.13 0.55 0.43 150° 155° 160° 165° 170° 175° –0.05 –0.02 –0.01 0.01 0.02 0.02 –0.07 –0.02 0.00 0.02 0.03 0.03 –0.09 –0.01 0.02 0.04 0.05 0.06 –0.11 –0.07 –0.03 –0.01 0.02 0.04 –0.03 0.03 0.09 0.13 0.17 0.19 0.00 0.09 0.18 0.26 0.32 0.36 –0.16 –0.05 0.09 0.22 0.32 0.37 –0.26 –0.14 0.04 0.21 0.33 0.42 –0.30 –0.18 0.05 0.27 0.44 0.54 –0.15 –0.05 0.21 0.51 0.75 0.89 –0.10 –0.08 0.23 0.63 0.95 1.15 0.01 –0.19 0.08 0.61 1.07 1.35 180° 185° 190° 195° 200° 205° 0.00 0.02 0.02 0.01 –0.01 –0.02 0.00 0.03 0.03 0.02 0.00 –0.02 0.01 0.06 0.05 0.04 0.02 –0.01 0.04 0.03 0.01 0.00 –0.03 –0.07 0.20 0.19 0.17 0.13 0.08 0.02 0.37 0.36 0.32 0.26 0.18 0.09 0.39 0.38 0.32 0.22 0.09 –0.04 0.44 0.42 0.34 0.21 0.04 –0.13 0.58 0.55 0.44 0.27 0.05 –0.16 0.94 0.89 0.75 0.52 0.22 –0.05 1.22 1.15 0.96 0.63 0.24 –0.07 1.45 1.35 1.07 0.62 0.09 –0.18 210° 215° 220° 225° 230° 235° –0.05 –0.05 –0.07 –0.08 –0.08 –0.08 –0.07 –0.05 –0.07 –0.09 –0.09 –0.09 –0.09 –0.05 –0.08 –0.09 –0.10 –0.09 –0.11 –0.14 –0.17 –0.18 –0.18 –0.17 –0.03 –0.07 –0.11 –0.11 –0.10 –0.08 0.01 –0.05 –0.06 –0.04 0.01 0.05 –0.15 –0.19 –0.17 –0.10 –0.02 0.00 –0.25 –0.28 –0.21 –0.10 –0.03 –0.07 –0.30 –0.27 –0.14 0.00 0.01 –0.12 –0.15 –0.04 0.17 0.28 0.16 –0.11 –0.10 0.16 0.41 0.36 0.01 –0.32 0.02 0.45 0.58 0.16 –0.39 –0.46 240° 245° 250° 255° 260° 265° –0.07 –0.06 –0.06 –0.05 –0.04 –0.04 –0.10 –0.07 –0.06 –0.06 –0.04 –0.03 –0.13 –0.08 –0.06 –0.06 –0.04 –0.03 –0.17 –0.15 –0.12 –0.11 –0.11 –0.10 –0.04 –0.02 –0.01 –0.01 –0.02 –0.04 0.08 0.07 0.04 –0.01 –0.06 –0.08 –0.05 –0.14 –0.24 –0.28 –0.27 –0.23 –0.18 –0.32 –0.39 –0.38 –0.32 –0.31 –0.32 –0.44 –0.42 –0.35 –0.35 –0.47 –0.31 –0.29 –0.18 –0.20 –0.39 –0.55 –0.32 –0.16 –0.20 –0.48 –0.62 –0.56 –0.25 –0.33 –0.70 –0.81 –0.75 –0.76 270° 275° 280° 285° 290° 295° –0.05 –0.03 –0.02 –0.02 –0.02 –0.02 –0.07 –0.03 –0.02 –0.02 –0.02 –0.02 –0.08 –0.02 –0.01 –0.01 –0.01 0.00 –0.10 –0.11 –0.12 –0.12 –0.12 –0.11 –0.07 –0.08 –0.09 –0.08 –0.06 –0.04 –0.08 –0.06 –0.03 –0.01 0.00 –0.02 –0.21 –0.24 –0.30 –0.37 –0.42 –0.42 –0.38 –0.49 –0.58 –0.59 –0.56 –0.52 –0.62 –0.68 –0.65 –0.60 –0.56 –0.51 –0.55 –0.50 –0.46 –0.40 –0.31 –0.22 –0.52 –0.49 –0.38 –0.28 –0.25 –0.23 –0.66 –0.53 –0.51 –0.51 –0.43 –0.43 300° 305° 310° 315° 320° 325° –0.05 –0.02 –0.02 –0.03 –0.03 –0.02 –0.07 –0.01 –0.02 –0.02 –0.02 –0.01 –0.08 0.00 0.00 –0.01 –0.01 0.01 –0.12 –0.11 –0.10 –0.08 –0.07 –0.04 –0.03 0.00 0.01 0.02 0.02 0.01 –0.04 –0.07 –0.09 –0.10 –0.10 –0.08 –0.40 –0.36 –0.32 –0.29 –0.24 –0.21 –0.48 –0.43 –0.37 –0.30 –0.23 –0.18 –0.43 –0.34 –0.28 –0.23 –0.18 –0.13 –0.17 –0.14 –0.09 –0.04 –0.01 0.01 –0.18 –0.15 –0.17 –0.21 –0.25 –0.24 –0.54 –0.62 –0.59 –0.50 –0.43 –0.37 330° 335° 340° 345° 350° 355° –0.03 0.01 0.02 0.04 0.04 0.05 –0.03 0.02 0.04 0.05 0.06 0.06 –0.02 0.04 0.06 0.08 0.08 0.08 –0.02 –0.03 –0.03 –0.02 –0.02 –0.02 0.00 0.00 –0.01 –0.01 –0.01 –0.01 –0.06 –0.05 –0.03 –0.02 –0.01 –0.01 –0.16 –0.12 –0.08 –0.05 –0.03 –0.02 –0.13 –0.09 –0.06 –0.03 –0.02 –0.01 –0.09 –0.06 –0.03 –0.02 –0.01 0.01 0.01 0.00 –0.01 –0.01 0.00 0.00 –0.19 –0.14 –0.09 –0.06 –0.04 –0.02 –0.33 –0.28 –0.20 –0.13 –0.07 –0.03 BE171211.book Page 98 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 98 Table A.42 Influence of Outdoor Microphone Kit UA 1404 on the directional response of Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.01 –0.03 –0.09 –0.14 –0.20 0.00 –0.01 –0.04 –0.09 –0.15 –0.20 0.00 –0.03 –0.08 –0.19 –0.30 –0.39 0.00 –0.04 –0.10 –0.20 –0.34 –0.47 0.00 –0.04 –0.14 –0.29 –0.49 –0.75 0.00 –0.07 –0.19 –0.39 –0.61 –0.81 0.00 –0.07 –0.20 –0.41 –0.69 –1.06 0.00 –0.07 –0.23 –0.48 –0.80 –1.19 0.00 –0.07 –0.19 –0.38 –0.70 –1.11 0.00 –0.08 –0.25 –0.55 –1.01 –1.53 10000 Hz 10600 Hz 0.00 –0.07 –0.23 –0.52 –0.97 –1.52 0.00 –0.10 –0.34 –0.73 –1.24 –1.78 30° 35° 40° 45° 50° 55° –0.29 –0.45 –0.63 –0.80 –0.85 –0.83 –0.28 –0.42 –0.57 –0.67 –0.78 –1.00 –0.46 –0.58 –0.75 –0.82 –0.88 –1.04 –0.64 –0.90 –1.30 –1.54 –1.56 –1.63 –1.02 –1.29 –1.54 –1.72 –1.86 –2.14 –1.03 –1.32 –1.70 –1.91 –2.15 –2.37 –1.49 –1.88 –2.26 –2.56 –2.57 –2.50 –1.54 –1.83 –2.16 –2.42 –2.60 –2.68 –1.52 –1.86 –2.15 –2.22 –2.26 –2.20 –1.80 –1.93 –2.13 –2.27 –2.29 –2.11 –1.88 –2.23 –2.49 –2.33 –2.09 –2.11 –1.98 –2.12 –2.34 –2.38 –2.22 –1.72 60° 65° 70° 75° 80° 85° –0.87 –0.96 –0.93 –0.79 –0.80 –0.93 –1.19 –1.15 –1.08 –1.18 –1.18 –0.99 –1.16 –1.32 –1.59 –1.53 –1.31 –1.31 –1.67 –1.71 –1.85 –1.97 –2.18 –1.86 –2.42 –2.24 –2.18 –1.90 –1.75 –1.66 –2.39 –2.36 –2.37 –1.93 –1.48 –0.93 –2.44 –2.22 –1.90 –1.34 –0.89 –0.28 –2.35 –2.04 –1.54 –1.15 –0.50 0.13 –2.08 –1.58 –0.99 –0.43 –0.14 0.46 –1.68 –1.20 –0.61 0.11 0.71 0.87 –1.70 –1.14 –0.49 0.01 0.91 1.59 –1.07 –0.72 –0.06 0.52 0.98 1.85 90° 95° 100° 110° 115° –0.92 –0.91 –1.02 –1.02 –0.88 –1.03 –1.08 –1.01 –0.98 –0.94 –1.14 –0.90 –0.88 –0.62 –0.49 –1.51 –1.22 –0.77 –0.46 –0.27 –1.63 –1.00 –0.64 0.10 0.22 –0.51 –0.36 0.12 0.82 1.03 0.08 0.58 0.85 1.41 1.72 0.76 1.01 1.40 2.03 2.20 1.19 1.74 1.99 2.54 2.81 1.35 2.22 2.65 3.17 3.51 1.75 2.22 2.97 3.52 3.79 2.55 2.80 3.35 4.06 4.32 120° 125° 130° 135° 140° 145° –0.48 –0.36 –0.58 –0.36 0.42 0.80 –0.68 –0.14 –0.14 –0.34 0.25 1.16 –0.44 –0.05 0.52 0.40 0.33 1.26 –0.14 –0.05 0.41 0.74 0.51 0.87 0.36 0.42 0.48 1.00 1.02 0.91 1.07 1.18 1.17 1.35 1.69 1.48 1.85 1.83 1.86 1.79 2.09 1.93 2.46 2.51 2.53 2.38 2.53 2.44 3.08 3.15 3.09 2.96 2.95 2.97 3.66 3.81 3.74 3.68 3.57 3.65 3.97 4.12 4.12 4.07 3.85 4.00 4.54 4.66 4.80 4.77 4.55 4.70 150° 155° 160° 165° 170° 175° 0.43 –0.10 –0.10 0.44 1.04 1.44 1.20 0.55 0.18 0.59 1.28 1.78 1.98 1.60 0.94 1.03 1.68 2.25 1.91 1.97 1.25 1.13 1.74 2.35 1.81 2.41 1.82 1.50 2.09 2.79 1.93 2.91 2.52 1.96 2.58 3.43 1.87 2.88 2.87 2.00 2.50 3.54 2.18 3.07 3.32 2.33 2.67 3.79 2.53 3.18 3.70 2.61 2.79 4.00 3.10 3.41 4.14 3.03 2.98 4.25 3.38 3.43 4.26 3.20 2.92 4.25 4.14 3.92 4.76 3.75 3.22 4.63 180° 185° 190° 195° 200° 205° 1.58 1.45 1.05 0.44 –0.10 –0.08 1.95 1.79 1.28 0.59 0.19 0.57 2.46 2.26 1.70 1.06 0.99 1.65 2.58 2.37 1.77 1.16 1.30 2.01 3.05 2.80 2.13 1.54 1.86 2.44 3.76 3.45 2.61 2.00 2.55 2.92 3.94 3.54 2.50 2.02 2.89 2.90 4.24 3.80 2.68 2.34 3.36 3.15 4.51 4.01 2.80 2.65 3.79 3.33 4.80 4.25 2.99 3.09 4.27 3.57 4.86 4.26 2.98 3.34 4.46 3.60 5.32 4.67 3.33 3.93 4.93 4.00 210° 215° 220° 225° 230° 235° 0.45 0.82 0.45 –0.33 –0.55 –0.35 1.22 1.19 0.28 –0.31 –0.12 –0.12 2.04 1.32 0.38 0.44 0.55 –0.03 1.94 0.89 0.52 0.74 0.41 –0.07 1.82 0.91 1.04 1.03 0.51 0.42 1.94 1.52 1.77 1.45 1.24 1.22 1.92 2.01 2.17 1.84 1.90 1.83 2.31 2.57 2.63 2.42 2.51 2.45 2.69 3.08 3.02 3.01 3.05 3.05 3.20 3.71 3.63 3.70 3.65 3.72 3.47 4.08 3.91 3.98 3.91 4.00 4.17 4.75 4.53 4.55 4.58 4.57 240° 245° 250° 255° 260° 265° –0.45 –0.88 –1.03 –1.06 –1.04 –0.92 –0.68 –0.97 –1.01 –1.03 –1.04 –1.08 –0.43 –0.51 –0.65 –0.81 –0.86 –0.87 –0.20 –0.33 –0.51 –0.62 –0.78 –1.29 0.32 0.18 0.10 –0.14 –0.69 –1.07 1.10 1.09 0.88 0.41 0.07 –0.35 1.87 1.72 1.36 1.07 0.82 0.59 2.42 2.18 1.96 1.55 1.40 0.96 3.02 2.78 2.45 2.20 1.98 1.64 3.66 3.42 3.01 2.91 2.57 2.07 3.85 3.49 3.32 3.17 2.72 2.03 4.31 4.02 4.01 3.66 3.14 2.73 270° 275° 280° 285° 290° 295° –0.91 –0.92 –0.80 –0.80 –0.97 –1.01 –1.01 –0.98 –1.21 –1.23 –1.13 –1.17 –1.15 –1.37 –1.37 –1.56 –1.57 –1.29 –1.60 –1.93 –2.19 –1.96 –1.86 –1.77 –1.66 –1.64 –1.75 –1.96 –2.25 –2.27 –0.46 –0.92 –1.54 –1.96 –2.34 –2.32 0.01 –0.39 –0.92 –1.33 –1.98 –2.34 0.63 0.08 –0.49 –1.22 –1.66 –2.04 1.10 0.45 –0.22 –0.56 –0.96 –1.50 1.31 0.80 0.57 0.10 –0.58 –1.28 1.62 1.39 0.83 0.00 –0.61 –1.21 2.41 1.76 1.00 0.45 –0.09 –0.73 300° 305° 310° 315° 320° 325° –0.92 –0.86 –0.85 –0.78 –0.61 –0.42 –1.18 –0.98 –0.74 –0.64 –0.56 –0.42 –1.16 –1.07 –0.94 –0.88 –0.82 –0.62 –1.77 –1.70 –1.57 –1.52 –1.27 –0.88 –2.41 –2.13 –1.86 –1.76 –1.58 –1.34 –2.42 –2.46 –2.21 –1.93 –1.64 –1.25 –2.46 –2.44 –2.51 –2.57 –2.30 –1.91 –2.26 –2.67 –2.67 –2.47 –2.13 –1.76 –2.13 –2.29 –2.26 –2.16 –2.13 –1.92 –1.73 –2.07 –2.28 –2.37 –2.22 –1.93 –1.72 –2.22 –2.24 –2.33 –2.40 –2.15 –1.20 –1.78 –2.12 –2.28 –2.35 –2.17 330° 335° 340° 345° 350° 355° –0.26 –0.17 –0.11 –0.05 0.00 0.03 –0.30 –0.22 –0.16 –0.11 –0.06 –0.03 –0.49 –0.38 –0.28 –0.16 –0.06 0.01 –0.62 –0.46 –0.33 –0.19 –0.10 –0.03 –1.06 –0.77 –0.49 –0.27 –0.10 –0.01 –0.95 –0.75 –0.56 –0.37 –0.19 –0.07 –1.46 –0.99 –0.59 –0.29 –0.11 0.02 –1.47 –1.15 –0.79 –0.49 –0.25 –0.09 –1.59 –1.16 –0.69 –0.36 –0.15 –0.03 –1.72 –1.42 –0.90 –0.47 –0.19 –0.03 –1.86 –1.55 –1.01 –0.56 –0.28 –0.10 –2.00 –1.76 –1.18 –0.65 –0.28 –0.04 BE171211.book Page 99 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 99 Table A.43 Influence of Outdoor Microphone Kit UA 1404 on the directional response of Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.11 –0.36 –0.72 –1.17 –1.70 0.00 –0.12 –0.40 –0.86 –1.40 –1.94 0.00 –0.11 –0.40 –0.85 –1.36 –1.76 0.00 –0.12 –0.46 –0.93 –1.41 –1.90 0.00 –0.12 –0.46 –1.00 –1.61 –2.10 0.00 –0.15 –0.59 –1.27 –1.98 –2.32 0.00 –0.14 –0.57 –1.19 –1.84 –2.31 0.00 –0.12 –0.48 –1.08 –1.78 –2.27 0.00 –0.10 –0.39 –0.97 –1.77 –2.27 0.00 –0.14 –0.50 –1.13 –2.09 –2.75 0.00 –0.19 –0.61 –1.25 –2.23 –3.11 30° 35° 40° 45° 50° 55° –2.09 –2.38 –2.58 –2.32 –2.23 –2.19 –2.32 –2.42 –2.54 –2.52 –2.43 –1.94 –2.00 –2.30 –2.55 –2.58 –2.29 –1.94 –2.34 –2.55 –2.58 –2.50 –2.44 –1.79 –2.55 –2.72 –2.87 –2.98 –2.35 –1.33 –2.57 –2.84 –3.03 –2.82 –1.84 –0.68 –2.78 –3.31 –3.21 –2.68 –1.66 –0.07 –2.88 –3.27 –3.12 –2.36 –0.71 1.17 –2.81 –3.19 –2.71 –1.69 0.18 1.79 –3.30 –3.51 –2.80 –1.37 0.68 1.95 –3.67 –3.85 –2.74 –0.75 1.23 2.53 60° 65° 70° 75° 80° 85° –1.35 –0.54 0.12 0.79 1.63 2.08 –1.26 –0.73 0.35 1.02 1.71 2.78 –1.01 –0.04 1.06 2.07 2.61 3.05 –0.60 0.12 1.37 2.41 3.13 3.85 –0.31 1.06 2.24 3.05 3.69 4.02 0.74 1.75 2.78 3.66 4.15 4.97 1.40 2.72 3.72 4.18 4.66 4.89 2.47 3.78 4.28 4.94 5.54 6.24 3.22 4.12 5.18 5.93 6.67 6.95 3.54 4.56 5.66 6.40 7.19 8.29 3.88 4.79 5.78 7.03 8.36 9.46 90° 95° 100° 105° 110° 115° 2.70 3.24 3.55 3.98 4.13 4.48 3.26 3.54 3.84 4.40 4.55 4.73 3.93 4.52 4.44 4.81 5.22 5.18 4.01 4.70 5.14 5.09 5.70 5.81 4.94 5.09 5.73 6.13 6.31 7.02 5.03 5.85 6.24 7.08 7.05 7.95 6.15 6.27 6.95 7.84 8.17 8.73 6.73 7.79 8.14 8.98 9.72 10.18 8.19 9.03 9.63 10.35 11.21 11.86 8.97 10.26 11.01 11.59 12.30 13.01 10.33 11.75 12.47 13.24 13.50 14.54 120° 125° 130° 135° 140° 145° 4.75 4.76 4.94 4.96 4.93 5.00 5.07 5.04 5.23 5.41 5.41 5.33 5.62 5.74 5.61 6.00 6.14 5.97 6.00 6.42 6.16 6.43 6.78 6.68 6.93 7.58 7.36 7.32 7.80 7.86 7.99 8.40 8.74 8.39 8.68 9.00 9.47 9.49 10.09 9.79 9.80 10.23 11.11 11.11 11.71 11.72 11.49 11.79 12.44 12.99 13.18 13.49 13.30 13.46 13.57 14.16 14.41 14.82 14.47 14.85 14.69 15.30 15.57 16.08 16.03 16.03 150° 155° 160° 165° 170° 175° 4.65 4.10 4.90 4.01 3.16 4.67 5.35 4.67 5.26 4.63 3.36 4.85 6.17 5.41 5.81 5.44 3.77 5.24 6.90 6.13 6.34 6.26 4.23 5.45 7.96 7.26 7.11 7.30 4.97 5.86 8.99 8.46 7.93 8.33 5.97 6.46 10.23 10.00 9.13 9.44 7.07 7.28 11.79 11.93 10.88 11.02 8.70 8.57 13.27 13.53 12.52 12.43 10.22 9.80 14.61 14.64 13.87 13.59 11.43 10.79 16.33 16.03 15.18 14.88 12.87 12.06 180° 185° 190° 195° 200° 205° 5.46 4.76 3.33 4.22 5.02 4.10 5.75 4.94 3.52 4.74 5.22 4.56 6.24 5.29 3.82 5.40 5.67 5.28 6.56 5.45 4.19 6.17 6.25 6.05 7.00 5.80 4.89 7.21 7.04 7.10 7.61 6.42 5.97 8.37 7.85 8.26 8.47 7.33 7.22 9.54 8.95 9.80 9.79 8.69 8.87 10.99 10.59 11.77 10.95 9.86 10.18 12.10 12.14 13.26 11.92 10.71 11.17 13.20 13.48 14.50 13.29 12.13 13.16 15.37 15.72 16.91 210° 215° 220° 225° 230° 235° 4.62 4.98 4.77 4.68 4.76 4.64 5.32 5.34 5.27 5.09 4.99 4.82 6.10 5.87 5.85 5.58 5.46 5.43 6.84 6.60 6.39 6.06 6.08 5.92 7.83 7.58 7.17 7.04 7.05 6.91 8.86 8.55 8.10 8.18 8.09 7.99 10.04 9.72 9.45 9.46 9.50 9.27 11.58 11.44 11.11 11.42 11.29 10.90 13.07 12.88 12.81 13.09 12.72 12.66 14.48 14.08 14.37 14.33 14.17 13.81 16.61 16.42 16.56 16.40 16.18 15.69 240° 245° 250° 255° 260° 265° 4.42 4.24 4.02 3.72 3.39 3.08 4.73 4.58 4.36 4.10 3.67 3.30 5.13 4.97 4.87 4.50 4.19 4.20 5.67 5.60 5.22 4.91 4.78 4.47 6.76 6.46 5.98 5.82 5.35 4.96 7.66 7.38 6.75 6.54 5.97 5.54 8.99 8.38 7.80 7.48 6.77 5.98 10.74 9.94 9.38 8.83 7.93 7.56 12.02 11.61 10.84 10.26 9.34 8.88 13.28 12.72 12.27 11.49 10.87 10.18 15.26 14.70 14.06 13.55 13.10 12.34 270° 275° 280° 285° 290° 295° 2.49 2.01 1.48 0.68 0.04 –0.72 3.09 2.63 1.58 0.91 0.19 –0.80 3.75 2.90 2.43 1.86 0.98 –0.06 3.87 3.63 2.93 2.30 1.33 –0.03 4.69 3.81 3.53 2.98 2.08 1.13 4.73 4.62 4.02 3.40 2.77 1.54 5.84 4.76 4.42 4.16 3.56 2.75 6.63 6.07 5.52 4.83 4.29 3.73 8.09 6.92 6.64 5.91 5.26 4.13 8.92 8.37 7.21 6.58 5.65 4.73 11.00 9.96 9.00 7.50 6.37 5.49 300° 305° 310° 315° 320° 325° –1.41 –2.17 –2.31 –2.47 –2.63 –2.34 –1.29 –2.04 –2.47 –2.47 –2.49 –2.43 –1.12 –2.02 –2.26 –2.61 –2.62 –2.30 –0.61 –1.75 –2.55 –2.52 –2.50 –2.55 –0.38 –1.43 –2.24 –3.00 –2.95 –2.68 0.68 –0.73 –1.97 –2.78 –3.03 –2.90 1.31 –0.07 –1.66 –2.73 –3.16 –3.24 2.54 1.11 –0.60 –2.30 –3.12 –3.22 3.29 1.87 0.25 –1.60 –2.63 –3.13 3.66 2.08 0.78 –1.24 –2.75 –3.38 4.42 3.13 1.69 –0.24 –2.36 –3.45 330° 335° 340° 345° 350° 355° –2.03 –1.68 –1.17 –0.75 –0.39 –0.14 –2.36 –1.96 –1.38 –0.81 –0.36 –0.07 –1.92 –1.72 –1.35 –0.86 –0.44 –0.13 –2.39 –1.91 –1.36 –0.87 –0.43 –0.10 –2.48 –2.08 –1.62 –1.02 –0.48 –0.14 –2.57 –2.27 –1.94 –1.24 –0.58 –0.15 –2.79 –2.34 –1.84 –1.17 –0.54 –0.11 –2.80 –2.23 –1.77 –1.11 –0.50 –0.13 –2.75 –2.19 –1.69 –0.92 –0.41 –0.12 –3.18 –2.68 –2.00 –1.05 –0.45 –0.12 –3.31 –2.87 –2.01 –1.06 –0.48 –0.12 BE171211.book Page 100 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 100 Table A.44 Directional response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 500 Hz – 3550 Hz. Frequency Angle 500 Hz 630 Hz 800 Hz 1000 Hz 1250 Hz 1600 Hz 2000 Hz 2240 Hz 2500 Hz 2800 Hz 3150 Hz 3550 Hz 0° 5° 10° 15° 20° 25° 0.00 0.05 0.05 0.05 0.03 0.02 0.00 0.06 0.06 0.06 0.04 0.03 0.00 0.07 0.08 0.07 0.05 0.03 0.00 0.00 0.00 0.00 –0.02 –0.02 0.00 –0.01 –0.01 –0.02 –0.03 –0.03 0.00 –0.01 –0.02 –0.03 –0.06 –0.08 0.00 –0.01 –0.03 –0.05 –0.09 –0.13 0.00 –0.01 –0.03 –0.05 –0.08 –0.12 0.00 –0.01 –0.03 –0.05 –0.09 –0.14 0.00 –0.01 –0.03 –0.05 –0.08 –0.11 0.00 –0.01 –0.04 –0.08 –0.14 –0.23 0.00 –0.02 –0.07 –0.16 –0.26 –0.37 30° 35° 40° 45° 50° 55° –0.02 –0.01 –0.02 –0.03 –0.03 –0.03 –0.03 –0.01 –0.03 –0.04 –0.04 –0.04 –0.04 –0.02 –0.04 –0.05 –0.05 –0.05 –0.03 –0.06 –0.09 –0.13 –0.15 –0.17 –0.03 –0.04 –0.04 –0.06 –0.08 –0.12 –0.12 –0.16 –0.20 –0.22 –0.24 –0.24 –0.19 –0.25 –0.31 –0.38 –0.44 –0.51 –0.17 –0.24 –0.31 –0.40 –0.48 –0.57 –0.20 –0.27 –0.34 –0.41 –0.48 –0.57 –0.15 –0.20 –0.27 –0.36 –0.45 –0.53 –0.33 –0.43 –0.50 –0.54 –0.57 –0.63 –0.47 –0.56 –0.67 –0.81 –0.97 –1.08 60° 65° 70° 75° 80° 85° –0.07 –0.04 –0.05 –0.06 –0.06 –0.07 –0.10 –0.06 –0.06 –0.07 –0.08 –0.09 –0.14 –0.07 –0.08 –0.09 –0.10 –0.11 –0.19 –0.20 –0.22 –0.23 –0.24 –0.24 –0.16 –0.19 –0.22 –0.25 –0.28 –0.29 –0.24 –0.25 –0.26 –0.29 –0.33 –0.38 –0.59 –0.66 –0.69 –0.68 –0.65 –0.62 –0.65 –0.72 –0.80 –0.88 –0.91 –0.87 –0.68 –0.78 –0.86 –0.93 –1.02 –1.10 –0.60 –0.68 –0.79 –0.90 –0.98 –1.06 –0.74 –0.85 –0.91 –0.97 –1.10 –1.23 –1.09 –1.09 –1.18 –1.34 –1.39 –1.45 90° 95° 100° 105° 110° 115° –0.10 –0.09 –0.10 –0.11 –0.11 –0.13 –0.14 –0.11 –0.12 –0.14 –0.14 –0.16 –0.19 –0.14 –0.15 –0.17 –0.18 –0.20 –0.25 –0.25 –0.26 –0.28 –0.29 –0.31 –0.29 –0.28 –0.27 –0.27 –0.27 –0.29 –0.42 –0.44 –0.43 –0.40 –0.36 –0.33 –0.63 –0.68 –0.75 –0.78 –0.75 –0.67 –0.80 –0.77 –0.83 –0.91 –0.95 –0.89 –1.09 –0.99 –0.91 –0.95 –1.06 –1.10 –1.16 –1.20 –1.09 –0.95 –0.97 –1.12 –1.29 –1.37 –1.48 –1.38 –1.15 –1.16 –1.60 –1.73 –1.75 –1.85 –1.80 –1.48 120° 125° 130° 135° 140° 145° –0.13 –0.14 –0.14 –0.13 –0.12 –0.10 –0.19 –0.17 –0.17 –0.17 –0.15 –0.13 –0.26 –0.22 –0.22 –0.21 –0.19 –0.17 –0.33 –0.35 –0.35 –0.34 –0.32 –0.29 –0.31 –0.34 –0.35 –0.36 –0.34 –0.30 –0.32 –0.34 –0.38 –0.42 –0.42 –0.39 –0.58 –0.53 –0.54 –0.60 –0.65 –0.65 –0.76 –0.65 –0.60 –0.65 –0.73 –0.77 –1.00 –0.81 –0.67 –0.66 –0.77 –0.86 –1.16 –0.98 –0.70 –0.57 –0.64 –0.81 –1.35 –1.37 –1.05 –0.68 –0.60 –0.80 –1.44 –1.70 –1.64 –1.08 –0.63 –0.71 150° 155° 160° 165° 170° 175° –0.10 –0.07 –0.05 –0.04 –0.03 –0.02 –0.14 –0.09 –0.07 –0.05 –0.03 –0.03 –0.20 –0.11 –0.08 –0.06 –0.04 –0.03 –0.25 –0.21 –0.16 –0.13 –0.10 –0.09 –0.24 –0.18 –0.11 –0.06 –0.01 0.01 –0.32 –0.22 –0.11 –0.02 0.05 0.09 –0.58 –0.44 –0.28 –0.13 –0.02 0.05 –0.71 –0.56 –0.35 –0.16 –0.01 0.08 –0.85 –0.68 –0.42 –0.17 0.03 0.15 –0.87 –0.71 –0.40 –0.06 0.21 0.37 –1.00 –0.91 –0.54 –0.09 0.27 0.50 –1.06 –1.19 –0.84 –0.26 0.25 0.56 180° 185° 190° 195° 200° 205° –0.04 –0.02 –0.03 –0.04 –0.05 –0.07 –0.06 –0.03 –0.03 –0.05 –0.07 –0.09 –0.08 –0.03 –0.04 –0.06 –0.08 –0.11 –0.08 –0.09 –0.10 –0.13 –0.16 –0.21 0.03 0.01 –0.01 –0.06 –0.11 –0.18 0.11 0.09 0.05 –0.02 –0.11 –0.22 0.07 0.05 –0.02 –0.13 –0.28 –0.44 0.11 0.08 –0.01 –0.16 –0.35 –0.56 0.19 0.15 0.03 –0.17 –0.42 –0.68 0.42 0.37 0.21 –0.06 –0.40 –0.71 0.57 0.50 0.27 –0.09 –0.54 –0.91 0.67 0.56 0.25 –0.26 –0.84 –1.19 210° 215° 220° 225° 230° 235° –0.10 –0.10 –0.12 –0.13 –0.14 –0.14 –0.14 –0.13 –0.15 –0.17 –0.17 –0.17 –0.20 –0.17 –0.19 –0.21 –0.22 –0.22 –0.25 –0.29 –0.32 –0.34 –0.35 –0.35 –0.24 –0.30 –0.34 –0.36 –0.35 –0.34 –0.32 –0.39 –0.42 –0.42 –0.38 –0.34 –0.58 –0.65 –0.65 –0.60 –0.54 –0.53 –0.71 –0.77 –0.73 –0.65 –0.60 –0.65 –0.85 –0.86 –0.77 –0.66 –0.67 –0.81 –0.87 –0.81 –0.64 –0.57 –0.70 –0.98 –1.00 –0.80 –0.60 –0.68 –1.05 –1.37 –1.06 –0.71 –0.63 –1.08 –1.64 –1.70 240° 245° 250° 255° 260° 265° –0.13 –0.13 –0.11 –0.11 –0.10 –0.09 –0.19 –0.16 –0.14 –0.14 –0.12 –0.11 –0.26 –0.20 –0.18 –0.17 –0.15 –0.14 –0.33 –0.31 –0.29 –0.28 –0.26 –0.25 –0.31 –0.29 –0.27 –0.27 –0.27 –0.28 –0.32 –0.33 –0.36 –0.40 –0.43 –0.44 –0.58 –0.67 –0.75 –0.78 –0.75 –0.68 –0.76 –0.89 –0.95 –0.91 –0.83 –0.77 –1.00 –1.10 –1.06 –0.95 –0.91 –0.99 –1.16 –1.12 –0.97 –0.95 –1.09 –1.20 –1.35 –1.16 –1.15 –1.38 –1.48 –1.37 –1.44 –1.48 –1.80 –1.85 –1.75 –1.73 270° 275° 280° 285° 290° 295° –0.10 –0.07 –0.06 –0.06 –0.05 –0.04 –0.14 –0.09 –0.08 –0.07 –0.06 –0.06 –0.19 –0.11 –0.10 –0.09 –0.08 –0.07 –0.25 –0.24 –0.24 –0.23 –0.22 –0.20 –0.29 –0.29 –0.28 –0.25 –0.22 –0.19 –0.42 –0.38 –0.33 –0.29 –0.26 –0.25 –0.63 –0.62 –0.65 –0.68 –0.69 –0.66 –0.80 –0.87 –0.91 –0.88 –0.80 –0.72 –1.09 –1.10 –1.02 –0.93 –0.86 –0.78 –1.16 –1.06 –0.98 –0.90 –0.79 –0.68 –1.29 –1.23 –1.10 –0.97 –0.91 –0.85 –1.60 –1.45 –1.39 –1.34 –1.18 –1.09 300° 305° 310° 315° 320° 325° –0.07 –0.03 –0.03 –0.03 –0.02 –0.01 –0.10 –0.04 –0.04 –0.04 –0.03 –0.01 –0.14 –0.05 –0.05 –0.05 –0.04 –0.02 –0.19 –0.17 –0.15 –0.13 –0.09 –0.06 –0.16 –0.12 –0.08 –0.06 –0.04 –0.04 –0.24 –0.24 –0.24 –0.22 –0.20 –0.16 –0.59 –0.51 –0.44 –0.38 –0.31 –0.25 –0.65 –0.57 –0.48 –0.40 –0.31 –0.24 –0.68 –0.57 –0.48 –0.41 –0.34 –0.27 –0.60 –0.53 –0.45 –0.36 –0.27 –0.20 –0.74 –0.63 –0.57 –0.54 –0.50 –0.43 –1.09 –1.08 –0.97 –0.81 –0.67 –0.56 330° 335° 340° 345° 350° 355° –0.02 0.02 0.03 0.05 0.05 0.05 –0.03 0.03 0.04 0.06 0.06 0.06 –0.04 0.03 0.05 0.07 0.08 0.07 –0.03 –0.02 –0.02 0.00 0.00 0.00 –0.03 –0.03 –0.03 –0.02 –0.01 –0.01 –0.12 –0.08 –0.06 –0.03 –0.02 –0.01 –0.19 –0.13 –0.09 –0.05 –0.03 –0.01 –0.17 –0.12 –0.08 –0.05 –0.03 –0.01 –0.20 –0.14 –0.09 –0.05 –0.03 –0.01 –0.15 –0.11 –0.08 –0.05 –0.03 –0.01 –0.33 –0.23 –0.14 –0.08 –0.04 –0.01 –0.47 –0.37 –0.26 –0.16 –0.07 –0.02 BE171211.book Page 101 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 101 Table A.45 Directional response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 4000 Hz – 10600 Hz. Frequency Angle 4000 Hz 4500 Hz 5000 Hz 5600 Hz 6300 Hz 7100 Hz 8000 Hz 8500 Hz 9000 Hz 9500 Hz 0° 5° 10° 15° 20° 25° 0.00 –0.02 –0.07 –0.14 –0.23 –0.35 0.00 –0.02 –0.08 –0.17 –0.29 –0.43 0.00 –0.03 –0.11 –0.23 –0.38 –0.54 0.00 –0.04 –0.14 –0.30 –0.51 –0.74 0.00 –0.04 –0.16 –0.34 –0.61 –0.94 0.00 –0.06 –0.23 –0.48 –0.81 –1.16 0.00 –0.07 –0.26 –0.55 –0.95 –1.46 0.00 –0.08 –0.28 –0.59 –1.02 –1.55 0.00 –0.08 –0.28 –0.60 –1.07 –1.70 0.00 –0.08 –0.30 –0.66 –1.22 –1.93 10000 Hz 10600 Hz 0.00 –0.09 –0.34 –0.75 –1.36 –2.09 0.00 –0.11 –0.40 –0.84 –1.46 –2.21 30° 35° 40° 45° 50° 55° –0.49 –0.70 –0.96 –1.19 –1.33 –1.41 –0.61 –0.83 –1.07 –1.26 –1.46 –1.78 –0.72 –0.97 –1.30 –1.54 –1.77 –2.06 –0.97 –1.29 –1.74 –2.06 –2.24 –2.55 –1.33 –1.75 –2.18 –2.57 –2.85 –3.23 –1.56 –2.06 –2.60 –2.97 –3.35 –3.78 –2.01 –2.51 –3.00 –3.50 –3.80 –4.09 –2.10 –2.61 –3.17 –3.60 –3.91 –4.19 –2.29 –2.81 –3.30 –3.66 –4.02 –4.20 –2.48 –2.96 –3.48 –3.86 –4.08 –4.25 –2.58 –3.10 –3.64 –3.93 –4.13 –4.33 –2.71 –3.22 –3.73 –3.99 –4.22 –4.38 60° 65° 70° 75° 80° 85° –1.55 –1.73 –1.79 –1.72 –1.80 –1.99 –2.08 –2.17 –2.23 –2.45 –2.51 –2.38 –2.27 –2.52 –2.92 –3.05 –3.02 –3.16 –2.86 –3.09 –3.34 –3.51 –3.82 –3.70 –3.61 –3.66 –3.94 –3.98 –3.99 –3.93 –4.02 –4.15 –4.28 –4.05 –3.95 –3.74 –4.32 –4.32 –4.24 –3.95 –3.73 –3.31 –4.20 –4.25 –3.98 –3.78 –3.45 –3.20 –4.24 –4.03 –3.86 –3.54 –3.33 –3.03 –4.23 –4.00 –3.71 –3.52 –3.20 –3.00 –4.13 –3.99 –3.66 –3.45 –3.20 –2.92 –4.16 –3.96 –3.69 –3.44 –3.15 –2.88 90° 95° 100° 105° 110° 115° –2.04 –2.09 –2.24 –2.28 –2.30 –2.19 –2.47 –2.58 –2.57 –2.59 –2.60 –2.59 –3.06 –2.85 –2.87 –2.84 –2.69 –2.58 –3.58 –3.45 –3.06 –2.92 –2.79 –2.60 –3.98 –3.52 –3.36 –2.96 –2.76 –2.65 –3.52 –3.47 –3.11 –2.96 –2.67 –2.51 –3.19 –2.95 –2.88 –2.71 –2.56 –2.32 –2.85 –2.78 –2.59 –2.59 –2.29 –2.20 –2.79 –2.54 –2.43 –2.33 –2.20 –2.03 –2.77 –2.47 –2.37 –2.20 –2.16 –1.94 –2.67 –2.46 –2.26 –2.22 –2.11 –1.98 –2.63 –2.43 –2.26 –2.23 –2.15 –2.11 120° 125° 130° 135° 140° 145° –1.82 –1.75 –1.99 –1.77 –0.97 –0.54 –2.36 –1.84 –1.88 –2.09 –1.49 –0.53 –2.55 –2.20 –1.68 –1.84 –1.90 –0.93 –2.49 –2.41 –1.98 –1.70 –1.95 –1.55 –2.49 –2.41 –2.37 –1.90 –1.93 –2.06 –2.46 –2.30 –2.29 –2.14 –1.87 –2.15 –2.20 –2.19 –2.06 –2.08 –1.82 –2.05 –2.02 –1.98 –1.85 –1.90 –1.75 –1.92 –1.86 –1.79 –1.75 –1.74 –1.72 –1.76 –1.88 –1.79 –1.75 –1.65 –1.70 –1.67 –1.88 –1.80 –1.75 –1.58 –1.68 –1.57 –1.97 –1.94 –1.83 –1.66 –1.66 –1.52 150° 155° 160° 165° 170° 175° –0.83 –1.27 –1.19 –0.57 0.09 0.53 –0.40 –0.95 –1.20 –0.70 0.07 0.62 –0.13 –0.39 –0.91 –0.70 0.04 0.66 –0.41 –0.21 –0.76 –0.73 0.00 0.68 –1.08 –0.32 –0.72 –0.85 –0.11 0.67 –1.67 –0.54 –0.71 –1.05 –0.25 0.72 –2.12 –0.99 –0.74 –1.34 –0.63 0.55 –2.21 –1.22 –0.73 –1.44 –0.85 0.43 –2.24 –1.51 –0.75 –1.54 –1.10 0.30 –2.27 –1.86 –0.88 –1.66 –1.42 0.05 –2.25 –2.13 –1.03 –1.74 –1.69 –0.14 –2.16 –2.33 –1.22 –1.82 –1.98 –0.33 180° 185° 190° 195° 200° 205° 0.68 0.53 0.09 –0.57 –1.19 –1.27 0.81 0.62 0.07 –0.70 –1.20 –0.95 0.88 0.66 0.04 –0.70 –0.91 –0.39 0.94 0.68 0.00 –0.73 –0.76 –0.21 0.96 0.67 –0.11 –0.85 –0.72 –0.32 1.08 0.72 –0.25 –1.05 –0.71 –0.54 1.00 0.55 –0.63 –1.34 –0.74 –0.99 0.93 0.43 –0.85 –1.44 –0.73 –1.22 0.86 0.30 –1.10 –1.54 –0.75 –1.51 0.67 0.05 –1.42 –1.66 –0.88 –1.86 0.55 –0.14 –1.69 –1.74 –1.03 –2.13 0.44 –0.33 –1.98 –1.82 –1.22 –2.33 210° 215° 220° 225° 230° 235° –0.83 –0.54 –0.97 –1.77 –1.99 –1.75 –0.40 –0.53 –1.49 –2.09 –1.88 –1.84 –0.13 –0.93 –1.90 –1.84 –1.68 –2.20 –0.41 –1.55 –1.95 –1.70 –1.98 –2.41 –1.08 –2.06 –1.93 –1.90 –2.37 –2.41 –1.67 –2.15 –1.87 –2.14 –2.29 –2.30 –2.12 –2.05 –1.82 –2.08 –2.06 –2.19 –2.21 –1.92 –1.75 –1.90 –1.85 –1.98 –2.24 –1.76 –1.72 –1.74 –1.75 –1.79 –2.27 –1.67 –1.70 –1.65 –1.75 –1.79 –2.25 –1.57 –1.68 –1.58 –1.75 –1.80 –2.16 –1.52 –1.66 –1.66 –1.83 –1.94 240° 245° 250° 255° 260° 265° –1.82 –2.19 –2.30 –2.28 –2.24 –2.09 –2.36 –2.59 –2.60 –2.59 –2.57 –2.58 –2.55 –2.58 –2.69 –2.84 –2.87 –2.85 –2.49 –2.60 –2.79 –2.92 –3.06 –3.45 –2.49 –2.65 –2.76 –2.96 –3.36 –3.52 –2.46 –2.51 –2.67 –2.96 –3.11 –3.47 –2.20 –2.32 –2.56 –2.71 –2.88 –2.95 –2.02 –2.20 –2.29 –2.59 –2.59 –2.78 –1.86 –2.03 –2.20 –2.33 –2.43 –2.54 –1.88 –1.94 –2.16 –2.20 –2.37 –2.47 –1.88 –1.98 –2.11 –2.22 –2.26 –2.46 –1.97 –2.11 –2.15 –2.23 –2.26 –2.43 270° 275° 280° 285° 290° 295° –2.04 –1.99 –1.80 –1.72 –1.79 –1.73 –2.47 –2.38 –2.51 –2.45 –2.23 –2.17 –3.06 –3.16 –3.02 –3.05 –2.92 –2.52 –3.58 –3.70 –3.82 –3.51 –3.34 –3.09 –3.98 –3.93 –3.99 –3.98 –3.94 –3.66 –3.52 –3.74 –3.95 –4.05 –4.28 –4.15 –3.19 –3.31 –3.73 –3.95 –4.24 –4.32 –2.85 –3.20 –3.45 –3.78 –3.98 –4.25 –2.79 –3.03 –3.33 –3.54 –3.86 –4.03 –2.77 –3.00 –3.20 –3.52 –3.71 –4.00 –2.67 –2.92 –3.20 –3.45 –3.66 –3.99 –2.63 –2.88 –3.15 –3.44 –3.69 –3.96 300° 305° 310° 315° 320° 325° –1.55 –1.41 –1.33 –1.19 –0.96 –0.70 –2.08 –1.78 –1.46 –1.26 –1.07 –0.83 –2.27 –2.06 –1.77 –1.54 –1.30 –0.97 –2.86 –2.55 –2.24 –2.06 –1.74 –1.29 –3.61 –3.23 –2.85 –2.57 –2.18 –1.75 –4.02 –3.78 –3.35 –2.97 –2.60 –2.06 –4.32 –4.09 –3.80 –3.50 –3.00 –2.51 –4.20 –4.19 –3.91 –3.60 –3.17 –2.61 –4.24 –4.20 –4.02 –3.66 –3.30 –2.81 –4.23 –4.25 –4.08 –3.86 –3.48 –2.96 –4.13 –4.33 –4.13 –3.93 –3.64 –3.10 –4.16 –4.38 –4.22 –3.99 –3.73 –3.22 330° 335° 340° 345° 350° 355° –0.49 –0.35 –0.23 –0.14 –0.07 –0.02 –0.61 –0.43 –0.29 –0.17 –0.08 –0.02 –0.72 –0.54 –0.38 –0.23 –0.11 –0.03 –0.97 –0.74 –0.51 –0.30 –0.14 –0.04 –1.33 –0.94 –0.61 –0.34 –0.16 –0.04 –1.56 –1.16 –0.81 –0.48 –0.23 –0.06 –2.01 –1.46 –0.95 –0.55 –0.26 –0.07 –2.10 –1.55 –1.02 –0.59 –0.28 –0.08 –2.29 –1.70 –1.07 –0.60 –0.28 –0.08 –2.48 –1.93 –1.22 –0.66 –0.30 –0.08 –2.58 –2.09 –1.36 –0.75 –0.34 –0.09 –2.71 –2.21 –1.46 –0.84 –0.40 –0.11 BE171211.book Page 102 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 102 Table A.46 Directional response for Microphone Type 4189 only, with Outdoor Microphone Kit UA 1404 fitted, 11200 Hz – 20000 Hz. Frequency Angle 11200 Hz 11800 Hz 12500 Hz 13200 Hz 14000 Hz 15000 Hz 16000 Hz 17000 Hz 18000 Hz 19000 Hz 20000 Hz 0° 5° 10° 15° 20° 25° 0.00 -0.13 -0.47 -0.96 -1.60 -2.34 0.00 -0.14 -0.50 -1.06 -1.72 -2.42 0.00 -0.14 -0.50 -1.07 -1.80 -2.54 0.00 -0.16 -0.61 -1.24 -1.94 -2.68 0.00 -0.16 -0.63 -1.34 -2.16 -2.88 0.00 -0.18 -0.68 -1.46 -2.36 -3.06 0.00 -0.18 -0.70 -1.49 -2.41 -3.25 0.00 -0.16 -0.65 -1.46 -2.45 -3.30 0.00 -0.16 -0.61 -1.44 -2.61 -3.52 0.00 -0.19 -0.70 -1.58 -2.87 -3.88 0.00 -0.21 -0.78 -1.67 -3.02 -4.30 30° 35° 40° 45° 50° 55° -2.90 -3.37 -3.87 -4.09 -4.36 -4.54 -3.05 -3.52 -4.01 -4.28 -4.57 -4.67 -3.11 -3.70 -4.17 -4.59 -4.80 -4.85 -3.37 -3.94 -4.51 -4.94 -5.15 -4.97 -3.63 -4.25 -4.83 -5.29 -5.27 -4.86 -3.85 -4.63 -5.18 -5.52 -5.23 -4.50 -4.03 -4.86 -5.37 -5.56 -4.90 -3.98 -4.23 -5.06 -5.51 -5.27 -4.40 -3.39 -4.44 -5.36 -5.53 -5.01 -3.86 -2.96 -4.88 -5.80 -5.71 -4.78 -3.61 -2.91 -5.29 -6.18 -5.72 -4.51 -3.43 -2.87 60° 65° 70° 75° 80° 85° -4.25 -4.11 -3.71 -3.47 -3.12 -2.80 -4.38 -4.21 -3.72 -3.34 -3.04 -2.67 -4.43 -4.16 -3.55 -3.15 -2.89 -2.60 -4.39 -3.98 -3.36 -2.94 -2.82 -2.68 -4.17 -3.60 -2.99 -2.76 -2.74 -2.76 -3.79 -3.10 -2.63 -2.52 -2.74 -2.85 -3.19 -2.54 -2.29 -2.38 -2.59 -2.88 -2.57 -2.16 -2.06 -2.14 -2.27 -2.59 -2.36 -2.06 -1.99 -2.04 -2.02 -2.19 -2.40 -2.28 -2.14 -1.97 -1.92 -1.86 -2.51 -2.40 -2.24 -2.05 -1.68 -1.39 90° 95° 100° 105° 110° 115° -2.62 -2.45 -2.38 -2.30 -2.36 -2.30 -2.55 -2.45 -2.43 -2.37 -2.46 -2.49 -2.48 -2.46 -2.53 -2.55 -2.63 -2.76 -2.56 -2.57 -2.69 -2.66 -2.70 -2.81 -2.66 -2.63 -2.73 -2.60 -2.63 -2.58 -2.76 -2.71 -2.68 -2.50 -2.47 -2.20 -2.76 -2.64 -2.57 -2.31 -2.22 -1.87 -2.43 -2.28 -2.20 -1.87 -1.78 -1.31 -2.12 -1.88 -1.82 -1.50 -1.36 -0.94 -1.77 -1.46 -1.40 -1.10 -1.03 -0.80 -1.15 -0.67 -0.65 -0.52 -0.44 -0.40 120° 125° 130° 135° 140° 145° -2.16 -2.16 -2.08 -1.91 -1.65 -1.54 -2.43 -2.39 -2.29 -2.10 -1.70 -1.62 -2.67 -2.52 -2.53 -2.33 -1.84 -1.65 -2.82 -2.64 -2.64 -2.52 -2.05 -1.64 -2.64 -2.43 -2.45 -2.44 -2.01 -1.45 -2.33 -2.12 -2.00 -2.02 -1.83 -1.14 -1.79 -1.61 -1.46 -1.48 -1.42 -0.72 -1.05 -1.14 -0.75 -0.77 -0.84 -0.26 -0.70 -0.68 -0.39 -0.27 -0.28 0.04 -0.43 -0.44 -0.18 0.06 0.05 0.33 -0.15 -0.06 0.07 0.43 0.51 0.77 150° 155° 160° 165° 170° 175° -2.00 -2.50 -1.41 -1.87 -2.33 -0.57 -1.80 -2.57 -1.70 -1.84 -2.65 -0.89 -1.59 -2.55 -1.93 -1.80 -2.96 -1.17 -1.38 -2.41 -2.11 -1.69 -3.17 -1.58 -1.11 -2.01 -2.13 -1.44 -3.14 -1.82 -0.80 -1.45 -2.00 -1.13 -2.83 -1.87 -0.33 -0.68 -1.57 -0.75 -2.40 -1.67 0.22 0.21 -1.01 -0.32 -1.85 -1.41 0.63 0.83 -0.52 -0.12 -1.42 -1.18 0.97 1.27 -0.03 0.01 -1.18 -1.06 1.52 1.84 0.65 0.30 -0.88 -0.96 180° 185° 190° 195° 200° 205° 0.28 -0.57 -2.33 -1.87 -1.41 -2.50 0.07 -0.89 -2.65 -1.84 -1.70 -2.57 -0.08 -1.17 -2.96 -1.80 -1.93 -2.55 -0.34 -1.58 -3.17 -1.69 -2.11 -2.41 -0.51 -1.82 -3.14 -1.44 -2.13 -2.01 -0.52 -1.87 -2.83 -1.13 -2.00 -1.45 -0.30 -1.67 -2.40 -0.75 -1.57 -0.68 -0.02 -1.41 -1.85 -0.32 -1.01 0.21 0.16 -1.18 -1.42 -0.12 -0.52 0.83 0.33 -1.06 -1.18 0.01 -0.03 1.27 0.53 -0.96 -0.88 0.30 0.65 1.84 210° 215° 220° 225° 230° 235° -2.00 -1.54 -1.65 -1.91 -2.08 -2.16 -1.80 -1.62 -1.70 -2.10 -2.29 -2.39 -1.59 -1.65 -1.84 -2.33 -2.53 -2.52 -1.38 -1.64 -2.05 -2.52 -2.64 -2.64 -1.11 -1.45 -2.01 -2.44 -2.45 -2.43 -0.80 -1.14 -1.83 -2.02 -2.00 -2.12 -0.33 -0.72 -1.42 -1.48 -1.46 -1.61 0.22 -0.26 -0.84 -0.77 -0.75 -1.14 0.63 0.04 -0.28 -0.27 -0.39 -0.68 0.97 0.33 0.05 0.06 -0.18 -0.44 1.52 0.77 0.51 0.43 0.07 -0.06 240° 245° 250° 255° 260° 265° -2.16 -2.30 -2.36 -2.30 -2.38 -2.45 -2.43 -2.49 -2.46 -2.37 -2.43 -2.45 -2.67 -2.76 -2.63 -2.55 -2.53 -2.46 -2.82 -2.81 -2.70 -2.66 -2.69 -2.57 -2.64 -2.58 -2.63 -2.60 -2.73 -2.63 -2.33 -2.20 -2.47 -2.50 -2.68 -2.71 -1.79 -1.87 -2.22 -2.31 -2.57 -2.64 -1.05 -1.31 -1.78 -1.87 -2.20 -2.28 -0.70 -0.94 -1.36 -1.50 -1.82 -1.88 -0.43 -0.80 -1.03 -1.10 -1.40 -1.46 -0.15 -0.40 -0.44 -0.52 -0.65 -0.67 270° 275° 280° 285° 290° 295° -2.62 -2.80 -3.12 -3.47 -3.71 -4.11 -2.55 -2.67 -3.04 -3.34 -3.72 -4.21 -2.48 -2.60 -2.89 -3.15 -3.55 -4.16 -2.56 -2.68 -2.82 -2.94 -3.36 -3.98 -2.66 -2.76 -2.74 -2.76 -2.99 -3.60 -2.76 -2.85 -2.74 -2.52 -2.63 -3.10 -2.76 -2.88 -2.59 -2.38 -2.29 -2.54 -2.43 -2.59 -2.27 -2.14 -2.06 -2.16 -2.12 -2.19 -2.02 -2.04 -1.99 -2.06 -1.77 -1.86 -1.92 -1.97 -2.14 -2.28 -1.15 -1.39 -1.68 -2.05 -2.24 -2.40 300° 305° 310° 315° 320° 325° -4.25 -4.54 -4.36 -4.09 -3.87 -3.37 -4.38 -4.67 -4.57 -4.28 -4.01 -3.52 -4.43 -4.85 -4.80 -4.59 -4.17 -3.70 -4.39 -4.97 -5.15 -4.94 -4.51 -3.94 -4.17 -4.86 -5.27 -5.29 -4.83 -4.25 -3.79 -4.50 -5.23 -5.52 -5.18 -4.63 -3.19 -3.98 -4.90 -5.56 -5.37 -4.86 -2.57 -3.39 -4.40 -5.27 -5.51 -5.06 -2.36 -2.96 -3.86 -5.01 -5.53 -5.36 -2.40 -2.91 -3.61 -4.78 -5.71 -5.80 -2.51 -2.87 -3.43 -4.51 -5.72 -6.18 330° 335° 340° 345° 350° 355° -2.90 -2.34 -1.60 -0.96 -0.47 -0.13 -3.05 -2.42 -1.72 -1.06 -0.50 -0.14 -3.11 -2.54 -1.80 -1.07 -0.50 -0.14 -3.37 -2.68 -1.94 -1.24 -0.61 -0.16 -3.63 -2.88 -2.16 -1.34 -0.63 -0.16 -3.85 -3.06 -2.36 -1.46 -0.68 -0.18 -4.03 -3.25 -2.41 -1.49 -0.70 -0.18 -4.23 -3.30 -2.45 -1.46 -0.65 -0.16 -4.44 -3.52 -2.61 -1.44 -0.61 -0.16 -4.88 -3.88 -2.87 -1.58 -0.70 -0.19 -5.29 -4.30 -3.02 -1.67 -0.78 -0.21 BE171211.book Page 103 Thursday, May 27, 2004 1:01 PM APPENDIX A Tables 103 Table A.47 Sensitivity variations of Microphone Type 4189 only and Outdoor Microphone Kit UA 1404 fitted, at sound incidence angles within ±θ ° from the reference direction. Nominal Frequency Exact Frequency Max Variation ± 30° Max Variation Max Variation ± 90° ± 150° 500 Hz 630 Hz 501.187 Hz 630.957 Hz 0.07 0.09 0.14 0.20 0.19 0.25 800 Hz 1000 Hz 1250 Hz 794.328 Hz 1000 Hz 1258.93 Hz 0.11 0.03 0.03 0.26 0.25 0.29 0.34 0.35 0.36 1600 Hz 2000 Hz 2240 Hz 2500 Hz 1584.89 Hz 1995.26 Hz 2238.72 Hz 2511.89 Hz 0.12 0.19 0.17 0.20 0.42 0.69 0.91 1.10 0.44 0.78 0.95 1.10 2800 Hz 3150 Hz 3550 Hz 4000 Hz 2818.38 Hz 3162.28 Hz 3548.13 Hz 3981.07 Hz 0.15 0.33 0.47 0.49 1.16 1.29 1.60 2.04 1.20 1.48 1.85 2.30 4500 Hz 5000 Hz 5600 Hz 6300 Hz 4466.84 Hz 5011.87 Hz 5623.41 Hz 6309.57 Hz 0.61 0.72 0.97 1.33 2.51 3.16 3.82 3.99 2.60 3.16 3.82 3.99 7100 Hz 8000 Hz 8500 Hz 9000 Hz 7079.46 Hz 7943.28 Hz 8413.95 Hz 8912.51 Hz 1.56 2.01 2.10 2.29 4.28 4.32 4.25 4.24 4.28 4.32 4.25 4.24 9500 Hz 10000 Hz 10600 Hz 11200 Hz 9440.61 Hz 10000 Hz 10592.5 Hz 11220.2 Hz 2.48 2.58 2.71 2.90 4.25 4.33 4.38 4.54 4.25 4.33 4.38 4.54 11800 Hz 12500 Hz 13200 Hz 14000 Hz 11885.0 Hz 12589.3 Hz 13335.2 Hz 14125.4 Hz 3.05 3.11 3.37 3.63 4.67 4.85 5.15 5.29 4.67 4.85 5.15 5.29 15000 Hz 16000 Hz 17000 Hz 18000 Hz 14962.4 Hz 15848.9 Hz 16788.0 Hz 17782.8 Hz 3.85 4.03 4.23 4.44 5.52 5.56 5.51 5.53 5.52 5.56 5.74 6.16 19000 Hz 20000 Hz 18836.5 Hz 19952.6 Hz 4.88 5.29 5.80 6.18 6.77 7.70 BE171211.book Page 104 Thursday, May 27, 2004 1:01 PM 104 Hand-held Analyzer Type 2250 – Instruction Manual BE171211.book Page 105 Thursday, May 27, 2004 1:01 PM 105 Appendix B Cross-references to Standards B.1 Introduction This chapter provides cross-references between specific paragraphs in the standards that require topics to be documented in the instruction manual, and the corresponding sections in this manual (and User Manual BE 1713) that conform to these. A normal index can be found at the end of this manual. BE171211.book Page 106 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 106 B.2 Cross-references to Standards IEC 60651 IEC 60651 Standard Paragraph Section This Manual’s Section 3.6 4.5 3.7 4.4 11.2 11) 4.12.3 3.8 4.4 11.2 12) 4.12, 4.12.2 3.9 4.4 11.2 13) 3.10 3.6.2 11.2 14) 3.13 3.6.6 4.2 4.16 User Manual BE 1713-11 Standard Paragraph Section This Manual’s Section 11.2 10) 5 2 5 4.6.4, 4.6.5, 4.7 11.2 15) 5 2 4.4 2.4, 4.6.1 11.2 16) 4.9 4.16 11.2 17) B.3 b 4.5, 3.2 11.2 18) 4.14 6.3 4.4 11.2 19) 4.4 6.6 B.3 b 11.2 20) 4.4 4.16 5.1 6.7 B.3 d 11.2 21) 7.2 (Note) 4.10.1 11.2 22) 4.6 7.5 4.10.3 11.2 23) 4.6.6 7.6 4.9.3 11.2 24) 4.7 7.8 2.5 11.2 25) 3.4 8.3 4.12.4, 3.3 11.2 26) 4.9.3 8.4 4.12.5 11.2 27) B.3 d 8.5 4.12, B.3 j 11.2 28) 3.2, 3.3 4.12.3 11.2 29) 4.12.6 3 11.2 30) 3.6.4 8.6 9.2 (Note) 9.2.1 5 11.2 31) 3.6.6 B.3 m 9.3.1 B.3 d, 3.4, 4.13 11.2 32) 11.2 33) 3.6.2, 3.6.3 9.4.2 4.6.1 11.2 34) 3.6, 3.6.6 9.4.4 4.10.3 11.2 35) 3.6, 3.6.6 11.2 Note i) 4.6 10.2 4.14 11.2 Note ii) 4.10.1 10.3 B.3 b 12.2.3 3.6, 3.6.6 12.3.2 B.3 m 12.4.5 3.6.6 10.1 5 10.4 B.3 n 11.2 1) 4.5, 3.2 2 User Manual BE 1713-11 11.2 2) 4.5 12.4.8 4.12.6 11.2 3) 4.9.2 12.4.9 3.6, 3.6.6 11.2 4) 4.4 12.5.1.2 3.6.6 11.2 5) 2.4 12.5.2.1 3.6.6 11.2 6) 2.5.3 12.5.2.7 4.2, 3.6 11.2 7) 4.12.4 12.5.3.5 B.3 m 11.2 8) 4.12.5 12.5.4.5 4.2, 3.6, 3.6.6 11.2 9) 4.12, B.3 j 12.5.4.10 4.12.6, 3.6.1 BE171211.book Page 107 Thursday, May 27, 2004 1:01 PM APPENDIX B Cross-references to Standards IEC 60804 Standard Paragraph Section This Manual’s Section IEC 60804 User Manual BE 1713-11 Standard Paragraph Section This Manual’s Section 3.7 4.4 11.2 18) B.3 b 3.11 4.5, 4.6.6, 4.2 11.2 19) 4.14 3.12 4.4 11.2 20) 4.16 3.15 4.4 11.2 21) 4.10.2 3.17 3.6.2 11.2 22) 4.15.4 3.20 3.6.6 11.2 23) 4.6.6 4.2 4.16 11.2 24) 4.7 3.4 5 4.10 4.16 11.2 25) 6.2 4.9.5, 4.9.6 11.2 26) 6.5 4.10.2 11.2 27) 4.9.4 9.1 (Note 1) 3 11.2 28) 3.2, 3.3 9.2.3 4.5 11.2 29) 4.12.6 11.2 30) 3.6.4 10.1 5 5 10.2 4.14 11.2 31) 3.6.6 10.3 B.3 b 11.2 32) B.3 m 7 11.2 33) 3.6.2, 3.6.3 2 11.2 34) 3.6, 3.6.6 10.4 11.2 1) 4.5, 3.2 11.2 2) 4.5, 4.6.6 11.2 35) 3.6, 3.6.6 11.2 3) 4.9.2 12.2.3 3.6, 3.6.6 11.2 4) 4.9.5, 4.9.6 12.3.2 B.3 m 11.2 5) 4.10.2 12.4.5 3.6.6 11.2 6) 4.4 12.4.8 4.12.6 11.2 7) 4.4 12.4.9 3.6, 3.6.6 11.2 8) 4.4 12.5.1 3.6.5, 4.2 11.2 9) 4.12.4 12.5.1.2 3.6.6 11.2 10) 4.12.5 12.5.1.3 3.6.5 11.2 11) 4.12, B.3 j 12.5.2.1 3.6.6 11.2 12) 4.12.3 12.5.2.7 4.2, 3.6 11.2 13) 4.12, 4.12.2 11.2 14) 11.2 15) 5 4.6.4, 4.6.5, 4.7 12.5.3.5 B.3 m 12.5.4.5 4.2, 3.6, 3.6.6 12.5.4.10 4.12.6, 3.6.1 4.9.4 11.2 16) 5 App. B.3 11.2 17) 2 App. C User Manual BE 1713-11 5 107 BE171211.book Page 108 Thursday, May 27, 2004 1:01 PM 108 Hand-held Analyzer Type 2250 – Instruction Manual IEC 61260 IEC 61260 Standard Paragraph Section This Manual’s Section 3.13 4.11 7 m) 3.5, 4.13 3.18 4.4 7 n) 3.5, 4.13, 4.14 3.19 4.4 7 o) 4.12.2 4.3 4.11 7 p) 4.12.5 4.6.4 4.11.3 7 q) B.3 i 4.7 4.11.1, 4.11.2 7 r) B.3 i 4.10 4.6.1 7 s) User Manual BE 1713-11 Standard Paragraph Section This Manual’s Section 2 4.11 3.5, 4.13 7 t) 4.12 3.5, 4.13, 4.14 7 u) 4.16 4.14.2 4.12 7 v) 2.5, 3.5 5.1 3.5, 4.16 7 w) 3.5 5.3.2 3.5, 4.13, 4.14 7 x) 3.6.4 5.5.1 4.6.1 7 y) 3.6.6 5.5.4 B.3 h 7 z) B.3 m 5.9 4.6.1 7 aa) 3.6.2 7 a) 4.2 7 bb) 3.6, 3.6.6 7 b) 4.11 7 cc) 3.6, 3.6.6 B.3 g 3.6, 3.6.6 7 c) 4.11 8.2.3 7 d) 4.11.1, 4.11.2 8.3.2 B.3 m 7 e) 4.11 8.4.4 3.5, 3.6.2 2 User Manual BE 1713-11 7 f) 4.4 8.4.5 3.6.6 7 g) 4.4 8.4.8 3.6, 3.6.6 7 h) 4.11 8.5.1.2 3.6.6 7 i) 4.11.3 8.5.2.1 3.6.6 7 j) 4.9 8.5.2.7 4.2, 3.6 7 k) 4.11.1, 4.11.2 8.5.3.5 B.3 m 7 l) 4.6.1 8.5.4.5 4.2, 3.6, 3.6.6 3, 10 BE171211.book Page 109 Thursday, May 27, 2004 1:01 PM APPENDIX B Cross-references to Standards IEC 61672-1 Standard Paragraph Section This Manual’s Section 5.1.4 5.1.5 IEC 61672-1 User Manual BE 1713-11 Standard Paragraph Section 2 5.17.1 (NOTE 2) 4.17 5.17.2 4.10.2 4.2 This Manual’s Section 5.1.6 4.5 2 - 8, 10 5.18.1 3.6.4, 1.3 5.1.7 3.2, 4.2 2 5.18.2 3.6.6 4, 11 5.19.2 3.4 5.1.10 2.4 5.20.2 4.15 5.1.12 4.9 5.20.3 4.15.4, 4.15.5 5.1.13 4.4, 4.5, 3.6.2 5.20.4 5.1.14 2.5.3 5.20.5 4.15 5.1.15 3.4 6.1.2 4.12.1 5.1.16 4.9.1, 3.4, 4.13 6.2.2 (NOTE) 2.3 5.1.17 B.3 r 6.3.2 B.3 k 5.1.18 4.16 5.1.8 5.2.1 6.5.2 B.3 m 6.6.1 3.6.6, 3.6.4 5 6.6.3 4.12.6 5.2.3 4.5, 4.2 5.2.4 4.5, 4.6.4, 4.2 6.6.4 (NOTE) B.3 l 5.2.6 4.6 6.6.9 4.12.6 5.2.7 B.3 q 7.1 4.5 5.2.8 4.6 7.2 4.5, 4.7, 4.6.2 5.3.1 4.7 7.3 4.2 5.4.3 2 7.4 B.3 f 7.5 5.5.3 4.9.7 9.1 b) 10 B.3 o 2 5.5.9 4.9.7 9.2.1 a) 5.5.10 4.9.7 9.2.1 b) 5.5.11 B.3 c 9.2.1 c) 4.5 5.6.1 4.8.1 9.2.1 d) 4.2, 4.5 5.6.2 4.8.1 9.2.1 e) B.3 r 5.6.3 4.8.1, 3.4 9.2.2 a) 2.5 5.6.4 4.8.1 9.2.2 b) B.3 e 5.6.5 2.2 9.2.2 c) 2.4, 4.6, B.3 p 5.7.1 2.5.2 9.2.2 d) 2.5.2 5.10.1 2.5 9.2.2 e) 4.9 4.2 2 - 8, 10 5.11.1 2.5 9.2.2 f) 4.9 5.12.1 4.9.8 9.2.2 g) 2.5, 4.10 5.14 B.3 a 9.2.2 h) 4.9.2 5.15.2 2.5 9.2.2 i) 4.9.8 5.15.3 2.5 9.2.2 j) 5.15.4 2.5 9.2.2 k) 2.5 5.15.5 4.10, 2.5 9.2.3 a) 4.15.4, 4.15.5 5.15.6 4.10.2 9.2.3 b) 5.15.7 2, 7 2 2 5 5.4.12 User Manual BE 1713-11 7, 9 2 9.2.3 c) 2 5.15.8 B.3 s 9.2.3 d) 5.16.1 4.14 9.2.4 a) 5 9.2.4 b) 5 5.17.1 3, 11, Appendix A 4.15 109 BE171211.book Page 110 Thursday, May 27, 2004 1:01 PM 110 Hand-held Analyzer Type 2250 – Instruction Manual IEC 61672-1 Standard Paragraph Section This Manual’s Section 9.2.4 c) 9.2.4 d) 4.6.4 9.2.5 a) 4.5 9.2.5 b) IEC 61672-1 User Manual BE 1713-11 Standard Paragraph Section This Manual’s Section 5 9.2.6 d) B.3 o 9.2.7 a) B.3 k 2, Appendix A 9.2.7 b) B.3 m 9.2.7 c) 4.12.6 4.4 9.2.5 c) 4.9 9.3 a) 9.2.5 d) 2.2 9.3 b) 4.4 9.2.5 e) 4.16 9.3 c) 4.5 9.3 d) B.3 q, 4.6 9.3 e) 4.9.7 4.9.7 9.2.5 f) 4.10.2 9.2.5 g) 4.9 9.2.5 h) 4.10.2 9.3 f) 9.2.5 i) 2.5.3 9.3 g) 3.4 9.2.5 j) 2.5.3, 4.10.2 9.3 h) 4.8.1 9.2.5 k) 2.5 9.3 i) 4.9.1, 3.4, 4.13 9.2.5 l) B.3 a 9.3 j) 4.15 9.3 k) B.3 c 9.2.5 m) 3 7 9.2.5 n) 9.3 l) 4.12.1 4.8.1 9.3 m) B.3 l 9.2.5 p) 4.14 9.3 n) 4.6.6, 4.2 9.2.6 a) 4.5, 4.7, 4.6.2, 4.2 9.3 o) 4.6.6, 3.6.2 9.2.6 b) 4.5 App. C 3 4.9.5 9.2.5 o) 9.2.6 c) 2 10 User Manual BE 1713-11 BE171211.book Page 111 Thursday, May 27, 2004 1:01 PM APPENDIX B Cross-references to Standards B.3 111 Irrelevant Topics This section provides a list of the cross-references to topics that are not provided in, or irrelevant for this product. References are made to the following lines of text: a “No user-selectable thresholds are provided.” b. “No connections are provided to permit insertion of an external filter or analyzer.” c. “The extent of the display device is greater than the linear operating range on any level range.” d. “No automatic range control system is provided.” e. “Optionally detailed tabular descriptions not included.” f. “No optional frequency responses are provided.” g. “The filter is an integral part of Type 2250.” h. “Neither recommended nor harmful.” i. “Only the limitations specified according to Chapter 8 of the standard.” j. “No correction information needed.” k. “No components of the sound level meter are intended to be operated only in an environmentally controlled enclosure (the remote PC is not part of the sound level meter).” l. “No greater field strengths specified.” m. “No performance degradation or loss of function specified.” n. “No DC output is provided.” o. “No manufacturer-provided auxiliary devices provided.” p. “No optional FLAT frequency response provided.” q. “Not recommended, see IEC 61672-1 paragraph 5.2.7.” r. “Only one channel provided.” s. “No alternative display device is provided” BE171211.book Page 112 Thursday, May 27, 2004 1:01 PM 112 Hand-held Analyzer Type 2250 – Instruction Manual BE171211.book Page 113 Thursday, May 27, 2004 1:01 PM 113 Index Numerics 1/1-Octave-band Centre Frequencies........................... 45 1/3 Octave-band Cente Frequencies ............................ 46 1/3 Octave-band Filters................................................. 16 A About This Manual .......................................................... 1 Accessories................................................................... 17 Acoustic Frequency Responses.................................... 21 Air temperature ............................................................. 19 Analytical filter design ................................................... 45 Average I-weighted Sound Level .................................. 12 B B*T Product................................................................... 13 B*T product ................................................................... 47 Base .............................................................................. 45 Battery Lifetime ............................................................. 50 BE 1077 .......................................................................... 1 BZ 5503 PC Software for Hand-held Analyzers.............. 2 BZ 7222 Sound Level Meter Software for Type 2250 ..... 2 BZ 7223 Frequency Analysis Software for Type 2250.... 2 C cable arrangement ........................................................ 17 Capacitance .................................................................. 20 CCLD Input ................................................................... 49 Components Included with Type 2250............................ 5 Components Not Included with Type 2250 ..................... 5 Conformance Testing.................................................... 15 Current Measurement ................................................... 11 D Descriptions .................................................................... 7 deviations ...................................................................... 21 Diffuse-field Frequency Responses .............................. 24 Direct Input.................................................................... 49 Directional Response .................................................... 26 E Elapsed Time ................................................................ 11 Electrical Frequency Responses................................... 20 Electrical Substitute for Microphones............................ 15 EMC Test Procedures ...................................................16 Emission ........................................................................17 Environmental Stabilisation Time ..................................48 Equivalent Continuous I-weighted Sound Level ............12 Equivalent Continuous Sound Level..............................12 Evaluator, Type 7820.......................................................2 Excessive condensation ................................................47 Expanded Uncertainties of Measurement......................20 Exponential Averaging...................................................43 Exponential averaging times..........................................43 exponential time constants ............................................10 Extended Dynamic Range Mode .....................................7 Extension cables............................................................20 External Power to Instrument ........................................50 F F and S Time-weighted....................................................8 F and S time-weightings ..................................................8 Fast Time Constant .......................................................47 Fast Time-weighting ......................................................47 Free-field Frequency Responses............................22, 55 Frequency Analysis Software for Type 2250, BZ 7223 ...2 Frequency Response.....................................................20 Frequency Responses Acoustic .....................................................................21 Free-field ...................................................................55 Frequency Weightings .....................................................8 Frequency Weightings According to IEC 61672 – 1 ........9 H Hand-held Analyzer, Type 2250 ......................................2 Headphones Socket ......................................................49 Humidity.........................................................................48 I I Time-weighted .............................................................10 I time-weighting..............................................................10 IEC 60651 Standard ........................................................8 IEC 61672 – 1 Standard ..................................................8 IEC 61672-1 (2002-05), Class 1, Group Z.......................1 Immunity as Sound Level Meter ....................................18 Immunity to Power and Radio-frequency Fields ............48 Impulse ..........................................................................10 Indicator Range .............................................................42 BE171211.book Page 114 Thursday, May 27, 2004 1:01 PM Hand-held Analyzer Type 2250 – Instruction Manual 114 Influence from the Operating Environment ....................47 Input Socket............................................................16, 49 Instantaneous Broadband Measurements.......................8 Instantaneous Time-weighted Sound Level...................10 International Standard for Sound Level Meters ...............1 Introduction ......................................................................1 L Latched Overload ..........................................................11 Linear Averaging............................................................44 Linear averaging times ..................................................44 Linear Operating Range .................................... 7, 42, 46 Linearity Range..............................................................42 Low Static Pressure.........................................................8 Lower Limit ....................................................................41 Low-level Sounds ............................................................7 M Magnetic Fields..............................................................48 Maximum Broadband Self-generated Noise..................39 Maximum Sound Level ..................................................41 Maximum Time-weighted Sound Level..........................11 Measured Quantities.................................................8, 13 Measurement Range .....................................................47 Measuring Range ..........................................................41 Microphone ....................................................................20 Microphone Handbook BA 5105......................................8 Microphone reference point ...........................................20 Minimum hold time according to IEC 60804 ..................44 Minimum Time-weighted Sound Level...........................11 Mounting for Acoustical Tests........................................15 Mounting for Mechanical Vibrations Tests.....................15 PC Software for Hand-held Analyzers, BZ 5503 .............2 Peak ..............................................................................44 Peak C Range ...............................................................43 Peak Sound Level .........................................................13 Preset Time ...................................................................11 Primary Indicator Range................................................41 Protector, Type 7825 .......................................................2 Pulse Range ..................................................................42 R radio frequency emission ..............................................17 random-incidence frequency responses .......................24 Real-time frequency range ............................................45 Rear Input Socket..........................................................16 Reference attenuation ...................................................45 Reference Conditions for Acoustic Calibration ..............20 Reference direction of sound incidence ........................20 Reference Environmental Conditions ............................19 Reference frequency .....................................................20 Reference range............................................................20 Reference sound pressure level....................................20 Relative Attenuation ......................................................16 Relative humidity ...........................................................19 Reset .............................................................................11 RF-emitter/receiver........................................................16 Running Spectrum Measurements ................................13 S Octave-band Filter Sets .................................................16 Octave-band Time Constants ........................................47 Open Circuit Sensitivity..................................................41 Operating humidity range ..............................................48 Operating temperature range ........................................48 Optional Software Modules..............................................2 Outdoor Microphone Kit UA 1404....................................1 Output Socket ................................................................49 Overload ............................................................ 8, 11, 13 Latched......................................................................11 Overload Limit................................................................41 Overload Percentage.....................................................11 Sampling rate ................................................................45 Securing of Microphone Cables during EMC Test ........17 Self-generated Noise.....................................................39 Setting Up Signal Source for Immunity Test .................16 Settling time according to IEC 60804 ............................44 Signal Source for Immunity Test ...................................16 Slow Time Constant ......................................................47 Socket Input ..........................................................................16 Software Modules Optional.......................................................................2 Sound Level Calibrator Type 4231 ..................................8 Sound Level Meter Software for Type 2250, BZ 7222 ....2 Sound Level Meter Standard...........................................1 Sound Pressure Level ...................................................10 Spectrum Analysis.........................................................45 Spectrum Measurements ..............................................13 SPL................................................................................10 Standards ......................................................................19 Start Measurement ........................................................11 Start Time ......................................................................11 Static pressure ..............................................................19 Storage temperature range ...........................................48 Susceptibility .................................................................18 System Overview ............................................................2 P T Pause Measurement......................................................11 Temperature ..................................................................48 Test Rig .........................................................................15 N Noise Explorer, Type 7815 ..............................................2 Nominal delay time ........................................................44 Nominal Open Circuit Sensitivity ...................................20 Nominal preamplifier attenuation ...................................20 Normal Mode of Operation during EMC Test ................17 O BE171211.book Page 115 Thursday, May 27, 2004 1:01 PM INDEX Testing 1/1 Octave-band and 1/3 Octave-band Filters . 16 Testing EMC According to IEC 60804 .......................... 17 Testing Immunity According to IEC 61260.................... 18 Time interval after completion of a measurement ......... 44 Timed Broadband Measurements................................. 11 Timed Measurements ................................................... 13 Timed Spectrum Measurements ................................... 13 Time-weighted Sound Level............................................ 8 Total Range .................................................................. 41 Trigger Socket............................................................... 49 Type 2250 Hand-held Analyzer....................................... 2 Type 7815 Noise Explorer............................................... 2 Type 7820 Evaluator ....................................................... 2 Type 7825 Protector ....................................................... 2 115 Typical Broadband Self-generated Noise ......................39 Typical Self-generated Noise Spectrums ......................39 Typical stabilisation time................................................48 Typical stabilization time................................................48 U Under-Range ..................................................... 8, 11, 13 Upper Limit ....................................................................41 User Manual BE 1713......................................................1 V Vibration.........................................................................48 Vibration sensitivity ........................................................48 BE171211.book Page 116 Thursday, May 27, 2004 1:01 PM 116 Hand-held Analyzer Type 2250 – Instruction Manual BE1713-11_Cover.fm Page 1 Friday, April 16, 2004 10:57 AM Technical Documentation Hand-held Analyzer Type 2250 With 2250 Sound Level Meter Software BZ 7222 and 2250 Frequency Analysis Software BZ 7223 User Manual HEADQUARTERS: DK-2850 Nærum · Denmark · Telephone: +45 4580 0500 · Fax: +45 4580 1405 · www.bksv.com · [email protected] Australia (+61) 2 9889-8888 · Austria (+43) 1 865 74 00 · Brazil (+55)11 5188-8166 · Canada (+1) 514 695-8225 China (+86) 10 680 29906 · Czech Republic (+420) 2 6702 1100 · Finland (+358) 9-755 950 · France (+33) 1 69 90 71 00 Germany (+49) 421 17 87 0 · Hong Kong (+852) 2548 7486 · Hungary (+36) 1 215 83 05 · Ireland (+353) 1 807 4083 Italy (+39) 0257 68061 · Japan (+81) 3 3779 8671 · Republic of Korea (+82) 2 3473 0605 · Netherlands (+31)318 55 9290 Norway (+47) 66 77 11 55 · Poland (+48) 22 816 75 56 · Portugal (+351) 21 47 11 4 53 · Singapore (+65) 377 4512 Slovak Republic (+421) 25 443 0701 · Spain (+34) 91 659 0820 · Sweden (+46) 8 449 8600 · Switzerland (+41) 1 880 7035 Taiwan (+886) 2 2502 7255 · United Kingdom (+44) 14 38 739 000 · USA (+1) 800 332 2040 Local representatives and service organisations worldwide English BE 1713 – 11 ">

Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Advertisement
Key features
- Sound Level Meter
- Frequency Analysis
- Class 1 Sound Level Meter
- Conformance to IEC 61672-1
- Optional software modules
- A-weighted, C-weighted and Z-weighted measurements
- Broadband and spectrum measurements
- PC software for data transfer, setup and remote display
- Conformance testing procedures
- Calibration procedures
Frequently asked questions
The Hand-held Analyzer 2250 Type 2250 is a measurement device designed for measuring sound levels and conducting frequency analysis. It is a Class 1 Sound Level Meter, conforming to the requirements of IEC 61672-1.
The Hand-held Analyzer 2250 Type 2250 can perform both broadband and spectrum measurements. It offers A-weighted, C-weighted and Z-weighted measurements for different applications.
The Hand-held Analyzer 2250 Type 2250 comes with the Sound Level Meter (SLM) module enabled, making it a Class 1 Sound Level Meter. Additionally, it offers optional software modules like the Frequency Analysis Software Module BZ 7223.
The Hand-held Analyzer 2250 Type 2250 is a powerful and versatile instrument, featuring a touch screen for easy operation, optional software modules for expanding functionality, and a comprehensive PC software package for data transfer, setup, remote display, and postprocessing.