obi59en

obi59en
IBM 10/100 Ethernet
Server Adapters
Family
User’s Guide
OPTIONS
by IBM
Note: Before using this information and the product it supports, read the information
under Appendix D, “Product warranties and notices” on page D-1.
Third Edition (May 2001)
© Copyright International Business Machines Corporation 2001. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by
GSA ADP Schedule Contract with IBM Corp.
Contents
Safety .
.
.
.
.
.
Preface . . . . . .
Registering your option .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. v
. vii
. vii
Installation and user’s guide. . . . . . . . . . . . . . . . 1-1
System requirements . . . . . . . . . . . . . . . . . . . 1-1
Microsoft service packs . . . . . . . . . . . . . . . . . 1-1
Novell NetWare support packs . . . . . . . . . . . . . . 1-1
Installing the adapter . . . . . . . . . . . . . . . . . . . 1-2
Attaching the network cable . . . . . . . . . . . . . . . 1-2
Connecting the Wake on LAN power cable . . . . . . . . . . 1-3
Installing the network device drivers . . . . . . . . . . . . . 1-5
Windows 2000 . . . . . . . . . . . . . . . . . . . . 1-5
Windows NT 4.0 Server . . . . . . . . . . . . . . . . . 1-5
Novell NetWare 5.x . . . . . . . . . . . . . . . . . . 1-6
Other operating systems . . . . . . . . . . . . . . . . . 1-7
Making a diskette . . . . . . . . . . . . . . . . . . . . 1-8
Additional setup and configuration . . . . . . . . . . . . . . 1-8
Appendix A. Troubleshooting . . . . . . . . . . .
PCI configuration troubleshooting . . . . . . . . . .
Web sites for software updates . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. A-1
. A-2
. A-3
Appendix B. Adapter specifications .
.
.
.
. B-1
.
.
.
.
.
.
.
.
Appendix C. Help and service . . . . . . . . . . . . . . . C-1
Online technical support . . . . . . . . . . . . . . . . . C-1
Telephone technical support . . . . . . . . . . . . . . . . C-1
Appendix D. Product warranty and notices . . . .
IBM Statement of Limited Warranty . . . . . . . .
Part 1 - General Terms . . . . . . . . . . .
Part 2 - Country-unique Terms . . . . . . . .
Notices . . . . . . . . . . . . . . . . .
Processing date data . . . . . . . . . . . .
Trademarks . . . . . . . . . . . . . . .
Electronic emission notices . . . . . . . . . .
Federal Communications Commission (FCC) statement
© Copyright IBM Corp. 2001
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. . D-1
. . D-1
. . D-1
. . D-4
. . D-11
. . D-12
. . D-13
. . D-13
. . D-13
iii
iv
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety
Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette
produktet.
© Copyright IBM Corp. 2001
v
Antes de instalar este produto, leia as Informações sobre Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Preface
This manual contains the information you need to install and use your adapter.
The manual is divided into two parts:
Installation and user’s guide
This guide contains abbreviated installation instructions.
This guide is available in the following languages:
v English
v French
v German
v Spanish
v Italian
v Brazilian Portuguese
v Traditional Chinese
v Japanese
Appendixes
The appendixes contain product specifications, help and service information
the product warranties, and notices.
Note: The illustrations in this manual might be slightly different from your
hardware.
For detailed adapter hardware information, driver installation procedures, and
advanced features, please go to the \info directory of the CD-ROM and view
the appropriate help files. For driver installation, view the drivers.htm file.
Registering your option
Thank you for purchasing OPTIONS by IBM. Please take a few moments to
register your product and provide us with information that will help IBM to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register you option on the IBM Web site at
http://www.ibm.com/pc/register
IBM will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive
further information.
© Copyright IBM Corp. 2001
vii
viii
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Installation and user’s guide
®
This book contains the information you need to install and use your IBM
10/100 Ethernet Server Adapter and 10/100 Dual Port Server Adapter.
System requirements
Before installing the adapter, check your computer for the following
configuration requirements:
v One open 32-bit PCI slot.
v One open 32-bit or 64-bit PCI slot for the 10/100 Dual Port Server Adapter
v The latest BIOS for your computer.
®
v Microsoft® Windows® 2000, Microsoft Windows NT 4.0, Windows
Millennium Edition (Me), Windows 98, Windows 95, Novell NetWare 3x or
later, Linux, Solaris, UnixWare, or DOS.
v Windows NT requires Service Pack 5 or later.
v For NetWare, update to the latest Support Pack available. The required
NLMs are included on this CD.
You can also download the necessary software from Microsoft and Novell sites.
Microsoft service packs
Go to the following Microsoft Web site for the latest Service Pack information:
http://www.microsoft.com/ntserver. If the Web address has changed, go to the
main Microsoft site and search for the term ’Service Pack’.
Novell NetWare support packs
Go to the following Novell Web site for the latest Support Pack information:
http://support.novell.com/misc/patlst.htm.
© Copyright IBM Corp. 2001
1-1
Installing the adapter
1. Turn off your computer and all attached devices, and unplug all cables
from your computer and all attached devices.
Attention: Turn off and unplug the computer before removing the cover.
Failure to do so could endanger you and might damage either the adapter,
the computer, or both. For servers that support Hot Plug technology, see
your server documentation
2. Remove the cover bracket from an unused 32-bit slot by unscrewing the
screw that secures it. Make sure that the cover bracket does not come into
contact with any conducting part of the system board.
®
3. If you want to enable the Wake on LAN feature, see “Using the Wake on
LAN feature” on page 1-4 before completing the rest of these steps.
4. Push the adapter into the slot until the adapter is firmly seated, and then
secure the adapter bracket with the screw that you removed in step 2.
5. Repeat steps 2 through 4 for each adapter that you want to install.
6. Replace the computer cover, attach all cables, and connect the computer to
an electrical outlet.
7. Turn on the computer. The computer BIOS automatically assigns resources
to the adapters. If you get a PCI configuration error, see the section on PCI
configuration troubleshooting in Appendix A.
Attaching the network cable
Connect the network cable to the adapter using Category 3, 4, or 5 Twisted
Pair Ethernet (TPE) network cable for a 10 Mbps networks or a Category 5 TPE
cable for a 100 Mbps networks. For more details, see Appendix B.
1-2
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
To configure the adapter, see the instructions for your operating system in
“Installing the network device drivers” on page 1-5.
Connecting the Wake on LAN power cable
Note: The Wake on LAN cable is not necessary for PCI 2.2 compliant systems.
However, you can connect the cable on these systems with no adverse
effect.
For the Wake on LAN feature to work correctly, the adapter must be connected
to a continuous power source. This enables the adapter to monitor the
network, even when the computer is turned off. To install the Wake on LAN
power cable, follow these instructions:
1. Turn off the computer and all attached devices. Unplug all cords and cables
from the computer.
2. Remove the computer cover.
3. Locate the 3-pin Wake on LAN connector on the adapter. Attach one end of
the Wake on Lan cable to the adapter as shown in the following
illustration.
4. Attach the other end of the Wake on Lan cable to the system board, as
shown in the illustration.
5. Some computers might require you to change a setting in your computer
BIOS or Setup program to enable the Wake on Lan feature. Check the
documentation that comes with your computer for more information.
6. Replace the computer cover and plug in the computer.
Installation and user’s guide
1-3
Using the Wake on LAN feature
The Wake on LAN feature operates according to a published specification for
network adapters that are capable of monitoring to network activity even
when the computer is turned off.
Wake on LAN adapters have a low-power standby mode that is active when
the rest of the computer is without power. The adapter responds to a wake-up
packet sent by another computer or network device. Typically, this wake-up
packet causes the adapter to signal the computer to turn on and run a
predefined program.
For more information about setting up and using the Wake on LAN feature,
see the Wake on LAN information brief at
http://www.ibm.com/pc/us/infobrf/iblan.html
See Appendix A for general troubleshooting and a listing of common problems
and solutions for Wake on LAN operability.
1-4
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Installing the network device drivers
This section includes device-driver installation procedures for the following
operating systems:
v Windows 2000 (for Windows 95, Windows 98, and Windows Me, see the
online User’s Guide)
v Windows NT 4.0 Server
v Novell NetWare 5.x (for 3.x, 4.x, and DOS clients, see the online User’s
Guide)
v Linux, Solaris, UnixWare 2.x and 7.0 (see the User’s Guide on the CD)
You can install device drivers directly from the CD, or you can create
installation diskettes. To create installation diskettes, see “Making a diskette”
on page 1-8.
Windows 2000
After you install the adapter in the computer, connect the cable, plug in the
power cord, and start the computer, Windows displays the Found New
Hardware window opens, and Found New Hardware Wizard starts. Follow
this procedure to install the correct device driver:
1. Insert the IBM 10/100 Ethernet Server Adapter Family CD into the CD-ROM
drive. If the CD starts automatically, close the window.
2. In the Wizard Welcome window, click Next.
3. Click Search, and then click Next.
4. In the Locate Driver window, select the CD-ROM check box, and then click
Next.
5. Click Next.
6. Click Finish.
7. Restart your computer.
Note: For Windows 2000, the adapter properties PROSet 2 utility is not
automatically installed with the network device driver installation. To
install PROSet 2, do the following:
v Go to Install Advanced Features option from the Autorun.exe
program on the CD.
v Or, run the setup.exe program from the Setup directory on the CD.
Windows NT 4.0 Server
The E100NT4.SYS NDIS 4.0 device driver supports Windows NT 4.0 Server. It
is not supported by Windows NT 3.51 or earlier versions of Windows NT.
Installation and user’s guide
1-5
Note: Before installing this device driver, review the Service Pack requirements
in “System requirements” on page 1-1. If you are also installing
Windows NT 4.0 at this time, you must first create a diskette for the
driver installation. See “Making a diskette” on page 1-8.
To install the device driver, follow these instructions:
1. Click Start, then click Settings, and then click Control Panel.
2. Click the Network icon.
3. Click Adapters, and click Add.
4. Click Have Disk.
5. Insert the IBM 10/100 Ethernet Server Adapter Family CD into the CD-ROM
drive.
6. Type the path to your CD-ROM drive, and then click OK.
7. Follow the instructions on the screen to install the device drivers. When the
adapter is added, is displayed in the Network adapters list.
8. Click OK, and then click Close. When prompted, restart your computer.
Novell NetWare 5.x
Note: For other NetWare server and client operating systems, see the online
User’s Guide on your CD.
Use the NetWare Install program to install the adapter device driver (the
device driver name: ce100b.LAN in the /nwserver folder). Review the Service
pack requirements in “System requirements” on page 1-1.
Note: Before installing the device driver, either load DOS or NetWare drivers
for your server CD-ROM drive or create a diskette from the IBM 10/100
Ethernet Server Adapter Family CD on a different computer. See “Making
a diskette” on page 1-8.
To install the device driver, follow these instructions.
1. From the NetWare console, type nwconfig and press Enter.
2. Click Driver options, and then press Enter.
3. Click Configure network drivers, and then press Enter.
4. Click Load an additional driver, and then press Enter.
5. Insert the IBM 10/100 Ethernet Server Adapter Family CD into the CD-ROM
drive, or insert the diskette that you created into the diskette driver and
select Install an unlisted driver by pressing Insert.
6. If you are using a diskette, press Enter. If you are using the CD, press F3
and specify the CD-ROM drive as the source path.
7. Press Enter to select the driver.
1-6
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
8. Click Yes, and then press Enter.
9. To modify any device driver parameters or protocols, click Select/Modify
driver parameters and protocols, and then press Enter. The slot number is
a required parameter and must be specified. If you have multiple
adapters, specify the slot number for the adapter that you are currently
configuring. When you are finished configuring the device driver, click
Save parameters and load driver to continue.
Note: If your computer contains a single IBM 10/100 Ethernet Server
adapter, you may specify any number for the slot. The driver
automatically detects the correct slot number and is loaded
successfully.
If your system contains more than one IBM 10/100 Ethernet Server
adapter, press Alt+Esc to switch to the console screen in NetWare to
find the valid slot numbers for your adapters. Type LOAD CE100 and
press Enter. The device driver attempts to load and prompts you
with the available slot numbers. Write down the slot numbers, and
then press Esc to stop loading the device driver. Press Alt+Esc to
switch back to the Install window and specify the correct slot
number.
10. For device driver window installation, press Esc until the Configuration
Options window is displayed, and then follow the on-screen instructions.
11. Click Exit to return to the server console prompt.
12. If you are installing multiple adapters, repeat the device driver installation
process for each new adapter in the server.
Note: If the adapter does not work after the installation, you might need
to modify the frame type or LOAD and BIND statements in the
AUTOEXEC.NCF file.
Other operating systems
For instructions to install the network device drivers in other operating
systems, look for help information in the \info directory or the Readme file in
the directory where the device drivers are.
Installation and user’s guide
1-7
Making a diskette
If you need to use a diskette to install the adapter device drivers, run the
makedisk.bat utility that corresponds to your OS. The following utility files are
in the root directory of IBM 10/100 Ethernet Server Adapters Family CD:
Windows NT 4.0
Windows 2000
Windows 9x
NetWare 4.x and 5.x
MAKENT.BAT
MAKEW2K.BAT
MAKEW9X.BAT
MAKENW.BAT
For more details on this utility, see the Readme.txt file in the root directory of
the IBM 10/100 Ethernet Server Adapters Family CD.
Additional setup and configuration
The IBM 10/100 Ethernet Server Adapter family supports many advanced
networking features:
Adapter Teaming: Maximize throughput and fault tolerance in your servers
with the following features:
v Adapter Fault Tolerance (AFT) - Provides automatic redundancy for your
adapter. If the primary adapter fails, the secondary adapter takes over. AFT
supports tow to eight adapters per team. This feature works with any hub or
switch.
v Adaptive Load Balancing (ALB) - Enables balancing the transmission data
flow among two to eight adapters. Also includes built-in AFT option. Note
that, with ALB, for reception, only the primary adapter can receive in-bound
traffic. This feature works with any switch.
v Intel Link Aggregation or Cisco Fast EtherChannel (FEC) - Creates a team of
two to eight adapters to increase both transmission and reception
throughput. Also includes built-in fault tolerance and load balancing.
Requires a switch with Link Aggregation or FEC capability.
v 802.3ad - IEEE 802.3ad -Performance technology standard similar to the Fast
EtherChannel (FEC) standard with the addition of dynamic team
aggregation. Requires an 802.3ad capable switch, configure to match static or
dynamic capabilities.
Virtual LAN: Create VLANs for your workgroups to improve network security
and efficiency.
PROSet 2: Use this utility to configure your adapter.
Management features: configure Wake on LAN and Boot Agent.
1-8
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Priority Packet: Use these features to set up priority filters on your network
traffic.
Packet Protect: Use this encryption utility to protect the confidentiality and
authenticity of IP traffic on your LAN.
For more information on these features, see the \info directory on the CD.
Installation and user’s guide
1-9
1-10
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Appendix A. Troubleshooting
This appendix describes corrective actions for common problems.
1. Check the LEDs on the adapter.
If the LINK light is not on, check all the connections at the adapter and link
partner. Make sure that the link partner is set to 100 Mbps and full duplex,
and that the device driver is running.
2. Make sure that the cable is installed properly.
The network cable must be securely attached at all connections. If the cable
is attached but the problem persists, try a different cable.
3. Test the adapter.
From DOS, run the adapter and network tests in diag100.exe, located in the
root directory of the IBM 10/100 Ethernet Server Adapter CD.
4. Check the following table for solutions to fit your problem.
If none of these steps work, see Appendix C.
Problem
Solution
The computer cannot
find the adapter
v Make sure the adapter is seated firmly in the slot.
v Try a different PCI busmaster slot. See your server
documentation to identify busmaster slots.
v Try a different IBM 10/100 Ethernet Adapter
Diagnostics pass but the
connection fails
v Try running the Sender-Responder diagnostic test.
v Make sure the network cable is securely attached.
An adapter stopped
v Make sure the cable is connected to the IBM 10/100
working after you
Ethernet Adapter and not another adapter.
installed the IBM 10/100 v Check for a resource conflict. See “PCI configuration
Ethernet family adapter
troubleshooting” on page A-2.
v Make sure both adapters are seated firmly in the slots.
v Check all cables
.
© Copyright IBM Corp. 2001
A-1
Problem
Solution
The adapter stopped
working without
apparent cause.
v Try reseating the adapter
v The network device driver files may be damaged or
deleted. Try reinstalling the device drivers.
v Try a different IBM 10/100 Ethernet adapter
v Try enabling or disabling the auto-negotiation setting on
the link partner (this setting must be set the same on both
the switch and the adapter).
Note: The adapter LNK LED might light even if
communications between the adapter and its link partner
have not been properly established. Proper configuration
of link partners consists of both sides being set to
auto-negotiate or set with the same speed and duplex
settings.
The LNK LED does not
light.
v
v
v
v
The Wake on LAN
feature is not working.
v Make sure the Wake on LAN cable is attached and that
power is being applied to the computer.
v Check the BIOS for its Wake on LAN setting. Some
computers may need to be configured for Wake on LAN.
See the documentation that comes with your computer.
v Make sure the network cable is fully attached to the
adapter.
Make sure you installed the adapter device driver.
Check all connections at the adapter or switch.
Try another port on the buffered repeater or switch.
Try enabling or disabling the auto-negotiation setting on
the link partner (this setting must be set the same on both
the switch and the adapter).
PCI configuration troubleshooting
Some PCI computers require additional steps to configure a PCI adapter. Try
the following if you are having problems configuring the adapter.
v Disable Plug and Play in the BIOS. In some computers, you may need to use
the BIOS setup program to disable Plug and Play if resources are not
properly assigned.
v Enable the PCI slot. In some PCI computers, you might need to use the BIOS
Setup program to enable the PCI slot. This is especially common in PCI
computers with the PhoenixBIOS code.
v Enable the slot for busmaster. You must install the IBM 10/100 Ethernet
Server adapter in a busmaster slot. Some BIOS setup programs require you
to enable the slot for busmaster/master. Check your BIOS setup program
and the computer documentation to make sure the slot is set for
busmaster/master.
A-2
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
v Configure the slot for level-triggered interrupts. The PCI slot that the
adapter is using must be configured for level-triggered interrupts instead of
edge-triggered interrupts. Check your BIOS setup program to make sure
level-triggering is set up.
v Reserve interrupts and memory addresses for ISA adapters. This prevents
PCI adapters from trying to use the same settings as ISA adapters. Check
your BIOS setup program; there might be IRQ options such as Enable for
ISA or Disable for PCI.
Here are some examples of BIOS setup program parameters:
PCI slot number:
Master:
Slave:
Latency timer
Interrupt:
Edge/Level:
slot where the adapter is installed (1-3)
Enabled
Enabled
40 - 80
Choose any one of several that the BIOS Setup provides
Level
The exact wording of the parameters varies with different computers.
Web sites for software updates
You can download Microsoft and Novell software updates from the following
sites:
v Microsoft Service Pack 5:ftp://ftp.microsoft.com/bussys/winnt/winntpublic/fixes/usa/nt40/ussp5/
v Microsoft Service Pack 4:ftp://ftp.microsoft.com/bussys/winnt/winntpublic/fixes/usa/nt40/ussp4/
v Microsoft Service Pack 3:ftp://ftp.microsoft.com/bussys/winnt/winntpublic/fixes/usa/nt40/ussp3/
v Microsoft NDIS Driver
Hotfix:ftp://ftp.microsoft.com/bussys/winnt/winntpublic/fixes/usa/nt40/hotfixes-postsp3/ndis-fix/
v Novell Support Pack 6 for NetWare 4.11 or Support Pack 1 for NetWare
5.0:http://support.novell.com/misc/patlst.htm
Appendix A. Troubleshooting
A-3
A-4
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Appendix B. Adapter specifications
Compatibility
PCI v2.2 systems
Media (cable) connectors and v RJ-45
wiring
v Use Category 5 cabling at 100 Mbps
v Supports 100BASE-TX Fast Ethernet
Data rate mode
10 or 100 Mbps
Interrupt levels
PCI: INTA (INTA and INTB for 10/100 Ethernet Dual
Port Server Adapters)
SRAM transmit/receive
buffer
6 KB
Power requirements
300 mA @ +5 V dc (1.5 watts) (3 watts @ 5V dc for
10/100 Dual Port Server Adapters)
Interrupt
PCI: INTA (INTA and INTB for 10/100 Dual Port Server
Adapters)
LEDs
Link/Activity
Dimensions
5.1 cm x 11.9 cm (2 in. x 4.7 in.) excluding bracket
Operating temperature
0° to 55° C (32° to 131° F)
Humidity
10% to 90% non-condensing
Standards conformance
IEEE 802.3, IEEE 802.3x, IEEE 802.1p, IEEE 802.1q
Diagnostic software
v On-board
v PROSet
v Responder
Compliance and
Ccertification
v
v
v
v
Duplex mode
Full duplex/Half duplex
© Copyright IBM Corp. 2001
Safety - UL
FCC Class B
CE and Immunity
C-tick (Australian)
B-1
B-2
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Appendix C. Help and service
This section contains information on how to obtain online and telephone
technical support.
Online technical support
Online technical support is available during the life of your product. Online
assistance can be obtained through the Personal Computing Support Web site
and the IBM Automated Fax System.
Online technical support
IBM Personal Computing Support Web site
http://www.ibm.com/pc/support
IBM Automated Fax System
1-800-426-3395 (U.S. and Canada)
During the warranty period, assistance for replacement or exchange of
defective components is available. In addition, if your IBM option is installed
in an IBM computer, you might be entitled to service at your location. Your
technical support representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the HelpCenter will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the
option has been withdrawn from marketing. Additional support offerings,
including step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v Option number
v Proof of purchase
v Computer manufacturer, model, serial number (if IBM), and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might
want to walk you through the problem during the call.
© Copyright IBM Corp. 2001
C-1
For the support telephone number and support hours by country, refer to the
following table or to the enclosed technical support insert. Support phone
numbers are also available by clicking HelpCenter phone list on the IBM
support Web page at
http://www.ibm.com/pc/support
If the number is not provided, contact your IBM reseller or IBM marketing
representative. Response time might vary depending on the number and
nature of the calls received.
Support 24 hours a day, 7 days a week
Canada (Toronto only)
416-383-3344
Canada (all other)
1-800-565-3344
U.S.A. and Puerto Rico
1-800-772-2227
C-2
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Appendix D. Product warranty and notices
This section contains the warranty period for your product and the IBM
Statement of Limited Warranty.
Machine - 10/100 Ethernet Server and 10/100 Dual Port Server Adapters Warranty
period* - One Year
* Contact your place of purchase for warranty service information. Some IBM Machines are
eligible for on-site warranty service depending on the country where service is performed.
IBM Statement of Limited Warranty
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms and Part 2
- Country-unique Terms. The terms of Part 2 replace or modify those of Part 1.
The warranties provided by IBM in this Statement of Limited Warranty apply
only to Machines you purchase for your use, and not for resale, from IBM or
your reseller. The term “Machine” means an IBM machine, its features,
conversions, upgrades, elements, or accessories, or any combination of them.
The term “Machine” does not include any software programs, whether
pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM
specifies otherwise, the following warranties apply only in the country where
you acquire the Machine. Nothing in this Statement of Limited Warranty
affects any statutory rights of consumers that cannot be waived or limited by
contract. If you have any questions, contact IBM or your reseller.
The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM’s Official Published Specifications
(“Specifications”). The warranty period for a Machine is a specified, fixed
period commencing on its Date of Installation. The date on your sales receipt is
the Date of Installation unless IBM or your reseller informs you otherwise.
If a Machine does not function as warranted during the warranty period, and
IBM or your reseller are unable to either 1) make it do so or 2) replace it with
one that is at least functionally equivalent, you may return it to your place of
purchase and your money will be refunded.
Extent of Warranty
© Copyright IBM Corp. 2001
D-1
The warranty does not cover the repair or exchange of a Machine resulting
from misuse, accident, modification, unsuitable physical or operating
environment, improper maintenance by you, or failure caused by a product for
which IBM is not responsible. The warranty is voided by removal or alteration
of Machine or parts identification labels.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION
OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH
WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
Items Not Covered by Warranty
IBM does not warrant uninterrupted or error-free operation of a Machine.
Any technical or other support provided for a Machine under warranty, such
as assistance via telephone with “how-to” questions and those regarding
Machine set-up and installation, will be provided WITHOUT WARRANTIES
OF ANY KIND.
Warranty Service
To obtain warranty service for a Machine, contact IBM or your reseller. If you
do not register your Machine with IBM, you may be required to present proof
of purchase.
During the warranty period, IBM or your reseller, if approved by IBM to
provide warranty service, provides without charge certain types of repair and
exchange service to keep Machines in, or restore them to, conformance with
their Specifications. IBM or your reseller will inform you of the available types
of service for a Machine based on its country of installation. At its discretion,
IBM or your reseller will 1) either repair or exchange the failing Machine and
2) provide the service either at your location or a service center. IBM or your
reseller will also manage and install selected engineering changes that apply to
the Machine.
Some parts of IBM Machines are designated as Customer Replaceable Units
(called “CRUs”), e.g., keyboards, memory, or hard disk drives. IBM ships CRUs
D-2
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
to you for replacement by you. You must return all defective CRUs to IBM
within 30 days of your receipt of the replacement CRU. You are responsible for
downloading designated Machine Code and Licensed Internal Code updates
from an IBM Internet Web site or from other electronic media, and following
the instructions that IBM provides.
When warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement
becomes yours. You represent that all removed items are genuine and
unaltered. The replacement may not be new, but will be in good working order
and at least functionally equivalent to the item replaced. The replacement
assumes the warranty service status of the replaced item. Many features,
conversions, or upgrades involve the removal of parts and their return to IBM.
A part that replaces a removed part will assume the warranty service status of
the removed part.
Before IBM or your reseller exchanges a Machine or part, you agree to remove
all features, parts, options, alterations, and attachments not under warranty
service.
You also agree to
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided:
a. follow the problem determination, problem analysis, and service request
procedures that IBM or your reseller provides;
b. secure all programs, data, and funds contained in a Machine;
c. provide IBM or your reseller with sufficient, free, and safe access to
your facilities to permit them to fulfill their obligations; and
d. inform IBM or your reseller of changes in a Machine’s location.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
Neither IBM nor your reseller is responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return
to IBM or your reseller for any reason. You should remove all such information
from the Machine prior to its return.
Limitation of Liability
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
Appendix D. Product warranty and notices
D-3
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract
or tort claim), except for any liability that cannot be waived or limited by
applicable laws, IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2. the amount of any other actual direct damages, up to the charges (if
recurring, 12 months’ charges apply) for the Machine that is subject of the
claim. For purposes of this item, the term “Machine” includes Machine
Code and Licensed Internal Code.
This limit also applies to IBM’s suppliers and your reseller. It is the
maximum for which IBM, its suppliers, and your reseller are collectively
responsible.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2)
LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST SAVINGS,
EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF
THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
Governing Law
Both you and IBM consent to the application of the laws of the country in
which you acquired the Machine to govern, interpret, and enforce all of your
and IBM’s rights, duties, and obligations arising from, or relating in any
manner to, the subject matter of this Agreement, without regard to conflict of
law principles.
Part 2 - Country-unique Terms
AMERICAS
BRAZIL
Governing Law: The following is added after the first sentence:Any litigation
arising from this Agreement will be settled exclusively by the court of Rio de
Janeiro.
NORTH AMERICA
D-4
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Warranty Service: The following is added to this Section: To obtain warranty
service from IBM in Canada or the United States, call 1-800-IBM-SERV
(426-7378).
CANADA
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws in the Province of Ontario.
UNITED STATES
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of the State of New York.
ASIA PACIFIC
AUSTRALIA
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Trade Practices Act 1974 or other similar legislation and are
only limited to the extent permitted by the applicable legislation.
Limitation of Liability: The following is added to this Section: Where IBM is in
breach of a condition or warranty implied by the Trade Practices Act 1974 or
other similar legislation, IBM’s liability is limited to the repair or replacement
of the goods or the supply of equivalent goods. Where that condition or
warranty relates to right to sell, quiet possession or clear title, or the goods are
of a kind ordinarily acquired for personal, domestic or household use or
consumption, then none of the limitations in this paragraph apply.
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of the State or Territory.
CAMBODIA, LAOS, AND VIETNAM
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence:laws of the State of New York.
The following is added to this Section: Disputes and differences arising out of or
in connection with this Agreement shall be finally settled by arbitration which
shall be held in Singapore in accordance with the rules of the International
Chamber of Commerce (ICC). The arbitrator or arbitrators designated in
conformity with those rules shall have the power to rule on their own
competence and on the validity of the Agreement to submit to arbitration. The
Appendix D. Product warranty and notices
D-5
arbitration award shall be final and binding for the parties without appeal and
the arbitral award shall be in writing and set forth the findings of fact and the
conclusions of law.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The number of arbitrators shall be three,
with each side to the dispute being entitled to appoint one arbitrator.
The two arbitrators appointed by the parties shall appoint a third arbitrator
before proceeding upon the reference. The third arbitrator shall act as chairman
of the proceedings. Vacancies in the post of chairman shall be filled by the
president of the ICC. Other vacancies shall be filled by the respective
nominating party. Proceedings shall continue from the stage they were at when
the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall
be the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
The English language version of this Agreement prevails over any other
language version.
HONG KONG AND MACAU
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of Hong Kong Special Administrative
Region.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s
negligence;
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject
of this Statement of Limited Warranty, IBM’s liability will be limited to the
charge paid by you for the individual Machine that is the subject of the
claim.
JAPAN
Governing Law: The following sentence is added to this Section:Any doubts
concerning this Agreement will be initially resolved between us in good faith
and in accordance with the principle of mutual trust.
D-6
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
NEW ZEALAND
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Consumer Guarantees Act 1993 or other legislation which
cannot be excluded or limited. The Consumer Guarantees Act 1993 will not
apply in respect of any goods which IBM provides, if you require the goods
for the purposes of a business as defined in that Act.
Limitation of Liability: The following is added to this Section: Where Machines
are not acquired for the purposes of a business as defined in the Consumer
Guarantees Act 1993, the limitations in this Section are subject to the
limitations in that Act.
PEOPLE’S REPUBLIC OF CHINA (PRC)
Governing Law: The following replaces this Section: Both you and IBM consent to
the application of the laws of the State of New York (except when local law
requires otherwise) to govern, interpret, and enforce all your and IBM’s rights,
duties, and obligations arising from, or relating in any manner to, the subject
matter of this Agreement, without regard to conflict of law principles.
Any disputes arising from or in connection with this Agreement will first be
resolved by friendly negotiations, failing which either of us has the right to
submit the dispute to the China International Economic and Trade Arbitration
Commission in Beijing, the PRC, for arbitration in accordance with its
arbitration rules in force at the time. The arbitration tribunal will consist of
three arbitrators. The language to be used therein will be English and Chinese.
An arbitral award will be final and binding on all the parties, and will be
enforceable under the Convention on the Recognition and Enforcement of
Foreign Arbitral Awards (1958).
The arbitration fee will be borne by the losing party unless otherwise
determined by the arbitral award.
During the course of arbitration, this Agreement will continue to be performed
except for the part which the parties are disputing and which is undergoing
arbitration.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES: The terms of
this Statement of Limited Warranty apply to Machines purchased from IBM or
an IBM reseller.
Warranty Service:
Appendix D. Product warranty and notices
D-7
If you purchase an IBM Machine in Austria, Belgium, Denmark, Estonia,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or
United Kingdom, you may obtain warranty service for that Machine in any of
those countries from either (1) an IBM reseller approved to perform warranty
service or (2) from IBM. If you purchase an IBM Personal Computer Machine
in Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia,
Czech Republic, Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of
Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova,
Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may
obtain warranty service for that Machine in any of those countries from either
(1) an IBM reseller approved to perform warranty service or (2) from IBM.
If you purchase an IBM Machine in a Middle Eastern or African country, you
may obtain warranty service for that Machine from the IBM entity within the
country of purchase, if that IBM entity provides warranty service in that
country, or from an IBM reseller, approved by IBM to perform warranty service
on that Machine in that country. Warranty service in Africa is available within
50 kilometers of an IBM authorized service provider. You are responsible for
transportation costs for Machines located outside 50 kilometers of an IBM
authorized service provider.
Governing Law:
The applicable laws that govern, interpret and enforce rights, duties, and
obligations of each of us arising from, or relating in any manner to, the subject
matter of this Statement, without regard to conflict of laws principles, as well
as Country-unique terms and competent court for this Statement are those of
the country in which the warranty service is being provided, except that in 1)
Albania, Bosnia-Herzegovina, Bulgaria, Croatia, Hungary, Former Yugoslav
Republic of Macedonia, Romania, Slovakia, Slovenia, Armenia, Azerbaijan,
Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan,
Turkmenistan, Ukraine, and Uzbekistan, the laws of Austria apply; 2) Estonia,
Latvia, and Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina
Faso, Cameroon, Cape Verde, Central African Republic, Chad, Congo, Djibouti,
Democratic Republic of Congo, Equatorial Guinea, France, Gabon, Gambia,
Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Mali, Mauritania, Morocco,
Niger, Senegal, Togo, and Tunisia, this Agreement will be construed and the
legal relations between the parties will be determined in accordance with the
French laws and all disputes arising out of this Agreement or related to its
violation or execution, including summary proceedings, will be settled
exclusively by the Commercial Court of Paris; 4) Angola, Bahrain, Botswana,
Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait, Liberia,
Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda, Sao
Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab
Emirates, United Kingdom, West Bank/Gaza, Yemen, Zambia, and Zimbabwe,
this Agreement will be governed by English Law and disputes relating to it
D-8
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
will be submitted to the exclusive jurisdiction of the English courts; and 5) in
Greece, Israel, Italy, Portugal, and Spain any legal claim arising out of this
Statement will be brought before, and finally settled by, the competent court of
Athens, Tel Aviv, Milan, Lisbon, and Madrid, respectively.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA AND GERMANY
The IBM Warranty for Machines: The following replaces the first sentence of the
first paragraph of this Section: The warranty for an IBM Machine covers the
functionality of the Machine for its normal use and the Machine’s conformity
to its Specifications.
The following paragraphs are added to this Section:
The minimum warranty period for Machines is six months. In case IBM or
your reseller is unable to repair an IBM Machine, you can alternatively ask for
a partial refund as far as justified by the reduced value of the unrepaired
Machine or ask for a cancellation of the respective agreement for such Machine
and get your money refunded.
Extent of Warranty: The second paragraph does not apply.
Warranty Service: The following is added to this Section: During the warranty
period, transportation for delivery of the failing Machine to IBM will be at
IBM’s expense.
Limitation of Liability: The following paragraph is added to this Section: The
limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2: IBM’s liability under this item
is limited to the violation of essential contractual terms in cases of ordinary
negligence.
EGYPT
Limitation of Liability: The following replaces item 2 in this Section: as to any
other actual direct damages, IBM’s liability will be limited to the total amount
you paid for the Machine that is the subject of the claim. For purposes of this
item, the term “Machine” includes Machine Code and Licensed Internal Code.
Applicability of suppliers and resellers (unchanged).
Appendix D. Product warranty and notices
D-9
FRANCE
Limitation of Liability: The following replaces the second sentence of the first
paragraph of this Section:In such instances, regardless of the basis on which you
are entitled to claim damages from IBM, IBM is liable for no more than: (items
1 and 2 unchanged).
IRELAND
Extent of Warranty: The following is added to this Section: Except as expressly
provided in these terms and conditions, all statutory conditions, including all
warranties implied, but without prejudice to the generality of the foregoing all
warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and
Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces items one and two of the first
paragraph of this Section:1. death or personal injury or physical damage to your
real property solely caused by IBM’s negligence; and 2. the amount of any
other actual direct damages, up to 125 percent of the charges (if recurring, the
12 months’ charges apply) for the Machine that is the subject of the claim or
which otherwise gives rise to the claim.
Applicability of suppliers and resellers (unchanged).
The following paragraph is added at the end of this Section: IBM’s entire liability
and your sole remedy, whether in contract or in tort, in respect of any default
shall be limited to damages.
ITALY
Limitation of Liability: The following replaces the second sentence in the first
paragraph:In each such instance unless otherwise provided by mandatory law,
IBM is liable for no more than: 1. (unchanged) 2. as to any other actual damage
arising in all situations involving nonperformance by IBM pursuant to, or in
any way related to the subject matter of this Statement of Warranty, IBM’s
liability, will be limited to the total amount you paid for the Machine that is
the subject of the claim. Applicability of suppliers and resellers (unchanged).
The following replaces the third paragraph of this Section: Unless otherwise
provided by mandatory law, IBM and your reseller are not liable for any of the
following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your
reseller is informed of their possibility.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
D-10
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Limitation of Liability: The following is added to this Section: IBM’s entire
liability to you for actual damages arising in all situations involving
nonperformance by IBM in respect of the subject matter of this Statement of
Warranty will be limited to the charge paid by you for the individual Machine
that is the subject of your claim from IBM.
UNITED KINGDOM
Limitation of Liability: The following replaces items 1 and 2 of the first paragraph
of this Section:
1. death or personal injury or physical damage to your real property solely
caused by IBM’s negligence;
2. the amount of any other actual direct damages or loss, up to 125 percent of
the charges (if recurring, the 12 months’ charges apply) for the Machine
that is the subject of the claim or which otherwise gives rise to the claim;
The following item is added to this paragraph: 3. breach of IBM’s obligations
implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply
of Goods and Services Act 1982.
Applicability of suppliers and resellers (unchanged).
The following is added to the end of this Section: IBM’s entire liability and your
sole remedy, whether in contract or in tort, in respect of any default shall be
limited to damages.
Notices
This publication was developed for products and services offered in the U.SA.
IBM may not offer the products, services, or features discussed in this
document in other countries. Consult your local IBM representative for
information on the products and services currently available in your area. Any
reference to an IBM product, program, or service is not intended to state or
imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
IBM intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any non-IBM product,
program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
Appendix D. Product warranty and notices
D-11
U.S.A.
The following paragraph does not apply to the United Kingdom or any
country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement
may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for this
IBM product, and use of those Web sites is at your own risk.
Processing date data
This IBM hardware product and IBM software products that might be
packaged with it have been designed, when used in accordance with their
associated documentation, to process date data correctly within and between
the 20th and 21st centuries, provided all other products (for example, software,
hardware, and firmware) used with these products properly exchange accurate
date data with them.
IBM cannot take responsibility for the date data processing capabilities of
non-IBM products, even if those products are preinstalled or otherwise
distributed by IBM. You should contact the vendors responsible for those
products directly to determine the capabilities of their products and update
them if needed. This IBM hardware product cannot prevent errors that might
occur if software, upgrades, or peripheral devices you use or exchange data
with do not process date data correctly.
The foregoing is a Year 2000 Readiness Disclosure.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
D-12
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
Trademarks
The following terms are trademarks of the IBM Corporation in the United
States, other countries, or both:
IBM
Wake on LAN
HelpCenter
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, product, and service names may be trademarks or service
marks of others.
Electronic emission notices
10/100 Ethernet Server and 10/100 Dual Port Server Adapters
Federal Communications Commission (FCC) statement
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
v Reorient or relocate the receiving antenna.
v Increase the separation between the equipment and receiver.
v Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
v Consult an IBM authorized dealer or service representative for help.
Appendix D. Product warranty and notices
D-13
Properly shielded and grounded cables and connectors must be used in order
to meet FCC emission limits. Proper cables and connectors are available from
IBM authorized dealers. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible party:
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Telephone: 1-919-543-2193
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
Cet appareil numérique de classe B est conforme à la norme NMB-003 du
Canada.
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG
vom 9.Nov.92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.
European Union - emission directive
D-14
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
This product is in conformity with the protection requirements of EU Council
Directive 89/366/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
IBM can not accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to CISPR 22/European Standard
EN 55022. The limits for Class B equipment were derived for typical residential
environments to provide reasonable protection against interference with
licensed communication devices.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive
89/336/EEC du Conseil de l’UE sur le rapprochement des lois des États
membres en matière de compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences
de protection résultant d’une modification non recommandée du produit, y
compris l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement informatique
de Classe B en vertu de CISPR22/Standard européen EN 55022. Les conditions
pour l’équipement de Classe B ont été définies en fonction d’un contexte
résidentiel ordinaire afin de fournir une protection raisonnable contre
l’interférence d’appareils de communication autorisés.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE,
Directiva 89/336/CEE en lo que a la legislatura de los Estados Miembros sobre
compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de
satisfacer dichos requisitos de protección como resultado de una modificación
no recomendada del producto, incluyendo el ajuste de tarjetas de opción que
no sean IBM.
Este producto ha sido probado y satisface los límites para Equipos Informáticos
Clase B de conformidad con el Estándar CISPR22 y el Estándar Europeo EN
55022. Los límites para los equipos de Clase B se han establecido para entornos
residenciales típicos a fin de proporcionar una protección razonable contra las
interferencias con dispositivos de comunicación licenciados.
Appendix D. Product warranty and notices
D-15
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della
Direttiva del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione
legislativa degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle
normative di protezione dovuta a modifiche non consigliate al prodotto,
compresa l’installazione di schede e componenti di marca diversa da IBM.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei
limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del
CISPR 22/Norma Europea EN 55022. I limiti delle apparecchiature della Classe
B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze
mediante dispositivi di comunicazione in concessione in ambienti residenziali
tipici.
Japanese statement of compliance for products less than or equal to 20 A per
phase
D-16
IBM 10/100 Ethernet Server Adapters Family: User’s Guide
Part Number: 22P4914
Printed in the United States of America
on recycled paper containing 10%
recovered post-consumer fiber.
(1P) P/N: 22P4914
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement