Moxa Technologies | NPort IA5150 series | Serial-to-Ethernet Device Servers

Serial-to-Ethernet Device Servers
Product Selection Guide
Combo Switch / Serial Device Servers ������������������������������������������������������������������������������������������������������������������� 9-2
General-purpose Device Servers����������������������������������������������������������������������������������������������������������������������������� 9-3
Industrial-grade Device Servers ����������������������������������������������������������������������������������������������������������������������������� 9-9
Wireless Device Servers��������������������������������������������������������������������������������������������������������������������������������������� 9-11
ZigBee Device Servers������������������������������������������������������������������������������������������������������������������������������������������� 9-12
General-purpose Device Servers
NPort® S8455 Series: Combo switch / serial device servers���������������������������������������������������������������������������������������9-13
NPort® S8458 Series: Combo switch / serial device server�����������������������������������������������������������������������������������������9-16
NPort® 5100A Series: 1-port RS-232/422/485 serial device servers �������������������������������������������������������������������������9-19
NPort® 5100 Series: 1-port RS-232/422/485 serial device servers�����������������������������������������������������������������������������9-22
NPort® P5150A Series: 1-port RS-232/422/485 PoE serial device servers ���������������������������������������������������������������9-24
NPort® DE-211/311: 1-port RS-232/422/485 serial device servers ���������������������������������������������������������������������������9-26
NPort® 5200A Series: 2-port RS-232/422/485 serial device servers �������������������������������������������������������������������������9-28
NPort® 5200 Series: 2-port RS-232/422/485 serial device servers�����������������������������������������������������������������������������9-31
NPort® 5400 Series: 4-port RS-232/422/485 serial device servers�����������������������������������������������������������������������������9-34
NPort® 5600 Series: 8 and 16-port RS-232/422/485 rackmount serial device servers���������������������������������������������9-37
NPort® 5600-8-DT Lite: 8-port RS-232/422/485 serial device servers�����������������������������������������������������������������������9-40
Device Servers for Industrial Automation
NPort® IA5000A Series: 1, 2, and 4-port serial device servers for industrial automation �����������������������������������������9-42
NPort® IA5000 Series: 1 and 2-port serial device servers for industrial automation�������������������������������������������������9-46
Wireless Device Servers
NPort® W2150A/W2250A: 1 and 2-port RS-232/422/485 IEEE 802.11a/b/g wireless device servers���������������������9-50
ZigBee Device Servers
NPort® Z2150/Z3150 Series: 1-port RS-232/422/485 to ZigBee converter or ZigBee-to-Ethernet gateway�������������9-53
9
Serial-to-Ethernet
Device Servers
Serial-to-Ethernet Device Servers
Combo Switch / Serial Device Servers
9
NPort S8000: Ethernet Switch Specifications
NPort S8000: General Specifications
Ethernet Interface
Port Summary
Standards
Network Protocols
Serial-to-Ethernet Device Servers > Product Selection Guide
MIB
Flow Control
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
ICMP, IP, TCP, UDP, ARP, Telnet, DNS, HTTP, SMTP, SNTP,
IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
IEEE 802.3x flow control, back pressure flow control interface
Switch Properties
Priority Queues
Max. Number of
Available VLANs
VLAN ID Range
IGMP Groups
4
64
RJ45 Ports
DIP Switches
Alarm Contact
LED Indicators
Physical Characteristics
Housing
Weight
Dimensions
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
Operating
Temperature
Input Voltage
Power Consumption
Multi-mode or Single-mode
10/100BaseT(X) auto negotiation speed, F/H duplex mode, and
auto MDI/MDI-X connection
Turbo Ring, Master, Coupler, Reserve
2 relay outputs with current carrying capacity of 1A @ 24 VDC
NPort S8000: Device Server Specifications
RS-485 Data Direction
Control
Pull High/Low Resistor
for RS-485
Terminator for RS-485
Console Port
Safety
EMC
EMI
Buzzer, RTC, WDT
MTBF
Warranty
4
RS-232/422/485
DB9 male
15 KV ESD protection for all signals
2 KV isolation protection
ADDC® (automatic data direction control)
1 KΩ, 150 KΩ
55 Ω, 120 Ω
Dedicated RS-232 console port (8-pin RJ45)
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS and XON/XOFF
50 bps to 921.6 Kbps
Serial Signals
RS-232
RS-422
RS-485-4w
RS-485-2w
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
Tx+, Tx-, Rx+, Rx-, GND
Data+, Data-, GND
Software
Configuration Options
Windows Real COM
Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
Operation Modes
Management
IP Routing
Web Console, Telnet Console, Serial Console, Windows Search
Utility
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7
x86/x64, Windows Embedded CE 5.0/6.0, Windows XP
Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR
4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
2.4.x, 2.6.x, 3.0.x
Real COM, TCP Server, TCP Client, UDP, RFC2217
SNMP MIB-II
Static, RIP-I, RIP-II
Reliability
Alert Tools
Automatic Reboot
Trigger
9-2
-40 to 75°C
5 to 95% (non-condensing)
-40 to 85°C
12 to 48 VDC
935mA @ 12 V, 470 mA @ 24 V
Standards and Certifications
Serial Communication Parameters
Data Bits
Stop Bits
Parity
Flow Control
Baudrate
0 to 60°C
UL 508, UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
IEC 61000-4-2, Level 4 (ESD)
IEC 61000-4-4, Level 4 (EFT)
IEC 61000-4-5 for serial port, Level 1 (Surge)
IEC 61000-4-5 for Power Line, Level 3 (Surge)
IEC 61000-4-5 for LAN port, Level 2 (Surge)
Reliability
Serial Interface
Serial Line Protection
Metal
995 g
73.1 x 134 x 105 mm
Environmental Limits
EMS
Number of Ports
Serial Standards
Connectors
4 RS-232/422/485 ports
3 RJ45 copper ports, 2 multi-mode fiber ports
1 (8-pin RJ45 connector)
PWR1, PWR2, READY, MASTER, COUPLER, LINK4,
LINK5
Power Requirements
VID 1 to 4094
256
Switch Interface
Optical Fiber Interface
Serial Ports
Ethernet Switch Ports
Console Ports
Built-in buzzer and RTC (real-time clock)
Built-in WDT (watchdog timer)
w w w. m o x a . c o m
info@moxa.com
P
200,951 hrs
5 years (see www.moxa.com/warranty)
Device Connectivity
General-purpose Device Servers
NPort 5110A
NPort 5110A-T
NPort 5130A
NPort 5130A-T
NPort 5150A
NPort 5150A-T
NPort P5150A
NPort 5110
NPort 5110-T
NPort 5130
NPort 5150
NPort DE-211
NPort DE-311
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
–
1
RJ45
1.5 KV
1
–
RJ45
1.5 KV
–
1
RJ45
1.5 KV
1
–
–
DB9-M
P
–
1
–
DB9-M
P
–
–
1
DB9-M
P
–
–
1
DB9-M
P
1
–
–
DB9-M
P
–
1
–
DB9-M
P
–
–
1
DB9-M
P
–
–
1
DB25-F
P
–
–
1
DB9-F
P
150 bps to
230.4 Kbps
150 bps to
230.4 Kbps
Ethernet Interface
10BaseT Ports
10/100BaseT(X) Ports
Connector
Magnetic Isolation Protection
Serial Interface
Baudrate
9
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485 Ports
Connector
15 KV ESD Protection
Serial Communication
Parameters
Flow Control
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
110 bps to
230.4 Kbps
50 bps to 921.6 Kbps
50 bps to 921.6 Kbps
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP,
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SMTP, IGMP V1/2
SNMP V1, HTTP, SMTP
P
P
P
P
P
P
P
P
P
P
P
P
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
DHCP, BOOTP, Telnet, TCP, UDP,
IP, ICMP, ARP
–
–
P
P
P
P
P
P
Physical Characteristics
Housing
Weight
Dimensions
Metal
340 g
52 x 80 x 22 mm
300 g
77 x 111 x 26
340 g
52 x 80 x 22 mm
480 g
67 x 100.4 x 22 mm
Environmental Limits
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
Operating
Temparture
0 to 60°C
0 to 55°C
-40 to 75°C
–
-40 to 75°C
–
125 mA / 40 mA
/ 180 mA(PoE)
128.7 mA / 72
mA / –
200 mA / 106
mA / –
200 mA / 106
mA / –
12 to 30 VDC
180 mA / 100
mA / –
–
–
–
–
–
EN 60601-1-2
Class B, EN
55011
2,231,530 hrs
279,122 hrs
246,505 hrs
246,034 hrs
347,822 hrs
225,529 hrs
5 to 95% (non-condensing)
-40 to 75°C
Power Requirements
Input Voltage
Power Consumption @
12/24/48 VDC
12 to 48 VDC
82.5 mA / 47.3
mA / –
89.1 mA / 49.5
mA / –
92.4 mA / 52.8
mA / –
9 to 30 VDC
150 mA / –
Standards and Certifications
Safety
EMC
EMI
EMS
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
Medical
–
–
–
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
WDT only
2,231,530 hrs
2,231,530 hrs
2,231,530 hrs
5 years (see www.moxa.com/warranty)
info@moxa.com
w w w. m o x a . c o m
9-3
Serial-to-Ethernet Device Servers
General-purpose Device Servers
NPort 5210A
NPort 5210A-T
NPort 5230A
NPort 5230A-T
NPort 5250A
NPort 5250A-T
NPort 5210
NPort 5210-T
NPort 5230
NPort 5230-T
NPort 5232
NPort 5232-T
NPort 5232I
NPort 5232I-T
1
RJ45
1.5 KV
1
RJ45
1.5 KV
1
RJ45
1.5 KV
1
RJ45
1.5 KV
1
RJ45
1.5 KV
1
RJ45
1.5 KV
1
RJ45
1.5 KV
–
2
–
TB
P
–
–
2
–
TB
P
P
Ethernet Interface
9
10/100BaseT(X) Ports
Connector
Magnetic Isolation Protection
Serial Interface
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation Protection
Serial Communication Parameters
Flow Control
Baudrate
2
–
–
2
1
–
2
–
–
1
–
–
2
–
–
DB9-M
TB
DB9-M
RJ45
TB
P
P
P
P
P
–
–
–
–
–
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
110 bps to 230.4 Kbps
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
P
P
P
P
P
P
P
P
P
P
–
–
P
P
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
P
–
P
P
Onsite Configuration
Mini Screen with Push Buttons
–
–
–
–
–
–
–
Physical Characteristics
Housing
Weight
Dimensions
Metal
340 g
52 x 80 x 22 mm
67 x 100.4 x 22 mm
0 to 60°C
0 to 55°C
360 g
380 g
67 x 100.4 x 35 mm
Environmental Limits
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
Operating
Temparture
-40 to 75°C
5 to 95% (non-condensing)
-40 to 85°C
Power Requirements
Input Voltage
Power Consumption @ 12/24 VDC
12 to 48 VDC
119 mA / 65 mA
119 mA / 65 mA
119 mA / 65 mA
325 mA / 190 mA
325 mA / 190 mA
280 mA / 150 mA
509.4 mA / 200 mA
Standards and Certifications
Safety
EMC
EMI
EMS
Marine
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
Level 2 Burst (EFT), EN 61000-4-4 (Surge) Level 3, EN
61000-4-5
–
–
–
Medical
–
Power Line Protection
–
–
–
–
–
–
DNV
EN 60601-1-2
Class B,
EN 55011
DNV
DNV
DNV
–
–
–
106,955 hrs
102,344 hrs
87,083 hrs
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
9-2
P
847,750 hrs
847,750 hrs
5 years (see www.moxa.com/warranty)
w w w. m o x a . c o m
847,750 hrs
134,850 hrs
info@moxa.com
Device Connectivity
General-purpose Device Servers
NPort 5410
NPort 5430
NPort 5430I
NPort 5450
NPort 5450-T
NPort 5450I
NPort 5450I-T
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
–
–
4
DB9-M
P
–
–
–
4
DB9-M
P
P
Ethernet Interface
10BaseT Ports
10/100BaseT(X) Ports
100BaseFX
Connector
Magnetic Isolation Protection
Serial Interface
4
–
–
–
4
4
–
–
–
DB9-M
TB
TB
P
P
P
P
–
–
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation Protection
Serial Communication Parameters
Flow Control
Baudrate
9
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
P
P
P
P
P
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Onsite Configuration
Mini Screen with Push Buttons
P
P
P
P
P
Metal
740 g
158 x 103 x 33 mm
740 g
158 x 103 x 33 mm
740 g
158 x 103 x 33 mm
740 g
158 x 103 x 33 mm
740 g
158 x 103 x 33 mm
Physical Characteristics
Housing
Weight
Dimensions
Environmental Limits
Operating Temparture
0 to 55°C
Operating Humidity
Storage Temperature
5 to 95% (non-condensing)
-20 to 70°C
Standard temperature: 0 to 55°C
Wide temperature: -40 to 75°C (without LCM)
5 to 95% (non-condensing)
-40 to 75°C
Power Requirements
Input Voltage
Power Consumption @ 12/24 VDC
12 to 48 VDC
350 mA / 190 mA
12 to 48 VDC
320 mA / 175 mA
12 to 48 VDC
530 mA / 280 mA
12 to 48 VDC
350 mA / 190 mA
12 to 48 VDC
554 mA / 294 mA
Standards and Certifications
Safety
EMC
EMI
EMS
Marine
Medical
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
DNV (standard temp. models only)
EN 60601-1-2 Class B, EN 55011 (NPort 5410, 5450, and 5450I only)
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
P
206,903 hrs
5 years (see www.moxa.com/warranty)
info@moxa.com
w w w. m o x a . c o m
9-3
Serial-to-Ethernet Device Servers
General-purpose Device Servers
NPort 5610-8
NPort
5610-8-48V
NPort 5630-8
NPort 5650-8
NPort 5650-8-T
NPort
5650-8-M-SC
NPort
5650-8-S-SC
NPort 5610-16
NPort
5610-16-48V
–
1
–
RJ45
–
1
–
RJ45
–
1
–
RJ45
–
1
–
RJ45
–
–
1 (multi-mode)
SC
–
–
1 (single-mode)
SC
–
1
–
RJ45
–
1
–
RJ45
1.5 KV
1.5 KV
1.5 KV
1.5 KV
–
–
1.5 KV
1.5 KV
8
–
–
RJ45
P
8
–
–
RJ45
P
–
8
–
RJ45
P
–
–
8
RJ45
P
–
–
8
RJ45
P
–
–
8
RJ45
P
16
–
–
RJ45
P
16
–
–
RJ45
P
–
–
–
–
–
–
–
–
P
–
P
P
P
–
P
P
Ethernet Interface
9
10BaseT Ports
10/100BaseT(X) Ports
100BaseFX Ports
Connector
Magnetic Isolation
Protection
Serial Interface
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation
Protection
Serial Communication
Parameters
Flow Control
Baudrate
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM
Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Onsite Configuration
Mini Screen with Push
Buttons
P
P
P
P
P
P
P
P
Metal
3340 g
3160 g
440 x 45 x 198 mm
3380 g
3360 g
3380 g
3380 g
3420 g
3260 g
Operating Temparture
0 to 55°C
0 to 55°C
0 to 55°C
0 to 55°C
0 to 55°C
0 to 55°C
Operating Humidity
5 to 95%
(non-condensing)
-20 to 75°C
5 to 95%
(non-condensing)
-20 to 75°C
0 to 55°C
-40 to 75°C
5 to 95%
(non-condensing)
-40 to 75°C
0 to 55°C
5 to 95%
(non-condensing)
-20 to 75°C
5 to 95%
(non-condensing)
-20 to 75°C
5 to 95%
(non-condensing)
-20 to 75°C
5 to 95%
(non-condensing)
-20 to 75°C
5 to 95%
(non-condensing)
-20 to 75°C
100 to 240 VAC,
47 to 63 hz
±48 VDC
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
±48 VDC
– / – / 135 mA
– / – / 135 mA
–
–
–
–
–
– / – / 135 mA
141/93 mA
–
152/98 mA
158/102 mA
174/113 mA
164/110 mA
141/93 mA
–
EN 55024
EN 55024
EN 55024
EN 55024
EN 55024
117,584 hrs
116,914 hrs
116,914 hrs
94,928 hrs
94,417 hrs
Physical Characteristics
Housing
Weight
Dimensions
Environmental Limits
Storage Temperature
Power Requirements
Input Voltage
Power Consumption @
12/24/48 VDC
Power Consumption @
100/240 VAC
Standards and Certifications
Safety
EMC
EMI
EMS
Medical
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
EN 55024
EN 55024
EN 60601-1-2 Class B, EN 55011
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
9-2
P
97,294 hrs
96,758 hrs
5 years (see www.moxa.com/warranty)
118,405 hrs
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
General-purpose Device Servers
NPort 5630-16
NPort 5650-16
NPort 5650-16-T
NPort
5650-16-M-SC
NPort
5650-16-S-SC
NPort 5610-8-DT
NPort
5610-8-DT-J
NPort 5650-8-DT
NPort 5650I-8-DT NPort
5650-8-DT-J
Ethernet Interface
10BaseT Ports
10/100BaseT(X)
Ports
100BaseFX Ports
Connector
Magnetic Isolation
Protection
–
–
–
–
–
–
–
–
–
1
1
–
–
2 (1 IP)
2 (1 IP)
2 (1 IP)
2 (1 IP)
2 (1 IP)
–
RJ45
–
RJ45
1 (multi-mode)
SC
1 (single-mode)
SC
–
RJ45
–
RJ45
–
RJ45
–
RJ45
–
RJ45
1.5 KV
1.5 KV
–
–
1.5 KV
1.5 KV
1.5 KV
1.5 KV
1.5 KV
–
16
–
–
–
–
–
–
8
–
8
–
–
–
–
–
–
–
9
Serial Interface
–
16
16
16
–
–
8
8
8
RJ45
P
RJ45
P
RJ45
P
RJ45
P
DB9-M
P
RJ45
P
DB9-M
P
DB9-M
P
RJ45
P
–
–
–
–
–
–
–
√
–
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485
Ports
Connector
15 KV ESD Protection
2 KV Isolation
Protection
Serial Communication
Parameters
Flow Control
Baudrate
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM
Drivers
Fixed TTY Drivers
Linux Real TTY
Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP,
SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
P
P
P
P
–
–
–
–
P
P
P
P
P
P
P
P
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP,
RFC2217
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Onsite Configuration
Mini Screen with
Push Buttons
P
P
P
P
P
P
P
P
P
3440 g
3440 g
1760 g
1170 g
197 x 44 x 125 mm
1770 g
1850 g
1710 g
0 to 55°C
5 to 95%
(noncondensing)
-20 to 75°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 75°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 75°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 70°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 70°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 70°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 70°C
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
100 to 240 VAC,
47 to 63 hz
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
–
–
–
–
611/300/140 mA
611/300/140 mA
615/300/156 mA
1066/510/200
mA
615/300/156 mA
152/98 mA
158/102 mA
174/113 mA
164/110 mA
–
–
–
–
–
–
–
–
–
–
163,356 hrs
163,356 hrs
163,356 hrs
163,356 hrs
163,356 hrs
Physical Characteristics
Housing
Weight
Dimensions
Metal
3400 g
3460 g
440 x 45 x 198 mm
Environmental Limits
Operating Temparture 0 to 55°C
5 to 95%
Operating Humidity
(noncondensing)
Storage Temperature -20 to 75°C
0 to 55°C
5 to 95%
(noncondensing)
-20 to 70°C
Power Requirements
Input Voltage
Power Consumption
@ 12/24/48 VDC
Power Consumption
@ 100/240 VAC
Standards and Certifications
Safety
EMC
EMI
EMS
Medical
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
EN 60601-1-2 Class B, EN 55011
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
P
91,483 hrs
104,767 hrs
87,528 hrs
5 years (see www.moxa.com/warranty)
87,528 hrs
info@moxa.com
w w w. m o x a . c o m
9-3
Serial-to-Ethernet Device Servers
General-purpose Device Servers
NPort 5610-8-DTL
NPort 5610-8-DTL-T
NPort 5650-8-DTL
NPort 5650-8-DTL-T
NPort 5650I-8-DTL
NPort 5650I-8-DTL-T
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
–
1
–
RJ45
1.5 KV
Ethernet Interface
9
10BaseT Ports
10/100BaseT(X) Ports
100BaseFX Ports
Connector
Magnetic Isolation Protection
Serial Interface
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232 Ports
RS-422/485 Ports
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation Protection
Serial Communication Parameters
Flow Control
Baudrate
8
–
–
–
–
8
DB9-M
DB9-M
P
P
–
–
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Software
Network Protocols
Web Console
Serial Console
Telnet Console
Windows Utility
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP
P
P
P
P
P
P
P
P
P
P
P
P
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Housing
Weight
Dimensions
Metal
1760 g
197 x 44 x 125 mm
1770 g
1850 g
470 mA / 250 mA
740 mA / 370 mA
Environmental Limits
Operating Temparture
Standard Temperature
Wide Temperature
Operating Humidity
Storage Temperature
0 to 60°C
-40 to 75°C
5 to 95% (non-condensing)
-40 to 75°C
Power Requirements
Input Voltage
Power Consumption @ 12/24 VDC
12 to 48 VDC
340 mA / 180 mA
Standards and Certifications
Safety
EMC
EMI
EMS
UL 60950-1, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
9-2
–
–
8
DB9-M
P
P
P
163,356 hrs
5 years (see wwwmoxacom/warranty)
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Industrial-grade Device Servers
NPort IA5150A
NPort IA5150A-T
NPort IA5150AI
NPort IA5150AI-T
NPort IA5250A
NPort IA5250A-T
NPort IA5250AI
NPort IA5250AI-T
NPort IA5450A
NPort IA5450A-T
NPort IA5450AI
NPort IA5450AI-T
2 (1 IP)
RJ45
1.5 KV
2 (1 IP)
RJ45
1.5 KV
2 (1 IP)
RJ45
1.5 KV
2 (1 IP)
RJ45
1.5 KV
2 (1 IP)
RJ45
1.5 KV
2 (1 IP)
RJ45
1.5 KV
1
DB9-M/TB
P
–
1
DB9-M/TB
P
P
2
DB9-M
P
–
2
DB9-M
P
P
4
DB9-M
P
–
4
DB9-M
P
P
Ethernet Interface
10/100BaseT(X) Ports
Connector
Magnetic Isolation Protection
Serial Interface
9
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation Protection
Serial Communication
Parameters
Flow Control
Baudrate
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Software
Network Protocols
Configuration Options
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP V1, HTTP, SMTP, SNTP, IGMP
Web Console, Serial Console, Telnet Console, Windows Utility
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Housing
Weight
Dimensions
Metal
475 g
36 x 105 x 140 mm
475 g
36 x 105 x 140 mm
485 g
36 x 105 x 140 mm
485 g
36 x 105 x 140 mm
560 g
45.8 x 134 x 105 mm
560 g
45.8 x 134 x 105 mm
Environmental Limits
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
Operating
Temparture
0 to 60°C
-40 to 75°C
5 to 95% (non-condensing)
-40 to 75°C
Power Requirements
Input Voltage
Power Consumption @ 12/24
VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
220 mA / 110 mA
225 mA / 130 mA
250 mA / 125 mA
290 mA / 150 mA
374 mA / 184 mA
512 mA / 242 mA
Standards and Certifications
Safety
Hazardous Location
EMC
EMI
EMS
Shock
Freefall
Vibration
UL 508
UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Class I Zone 2
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024, EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN
61000-4-8, EN 61000-4-11
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
P
262,805 hrs
262,805 hrs
5 years (see www.moxa.com/warranty)
262,805 hrs
info@moxa.com
262,805 hrs
262,805 hrs
w w w. m o x a . c o m
262,805 hrs
9-3
Serial-to-Ethernet Device Servers
Industrial-grade Device Servers
NPort IA5150
NPort IA5150-T
NPort IA5150I
NPort IA5150I-T
NPort IA5150-M-SC
NPort IA5150-M-SC-T
NPort IA5150I-M-SC
NPort IA5150I-M-SC-T
NPort IA5150-S-SC
NPort IA5150-S-SC-T
NPort IA5150I-S-SC
NPort IA5150I-S-SC-T
NPort IA5250
NPort IA5250-T
2 (1 IP)
–
RJ45
1.5 KV
2 (1 IP)
–
RJ45
1.5 KV
–
1 (multi-mode)
SC
–
–
1 (multi-mode)
SC
–
–
1 (single-mode)
SC
–
–
1 (single-mode)
SC
–
2 (1 IP)
–
RJ45
1.5 KV
1
DB9-M/TB
P
–
1
DB9-M/TB
P
P
1
DB9-M/TB
P
–
1
DB9-M/TB
P
P
1
DB9-M/TB
P
–
1
DB9-M/TB
P
P
2
DB9-M
P
–
Ethernet Interface
9
10/100BaseT(X) Ports
100BaseFX Ports
Connector
Magnetic Isolation Protection
Serial Interface
Serial-to-Ethernet Device Servers > Product Selection Guide
RS-232/422/485 Ports
Connector
15 KV ESD Protection
2 KV Isolation Protection
Serial Communication
Parameters
Flow Control
Baudrate
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
110 bps to 230.4 Kbps
Software
Network Protocols
Configuration Options
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP V1, HTTP, SMTP, SNTP
Web Console, Serial Console, Telnet Console, Windows Utility
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows Embedded CE 5.0/6.0, Windows XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Housing
Weight
Dimensions
Plastic (IP30)
360 g
29 x 89.2 x 118.5 mm
Environmental Limits
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
Operating
Temparture
0 to 55°C
-40 to 75°C
5 to 95% (non-condensing)
-40 to 85°C
Power Requirements
Input Voltage
Power Consumption
12 to 48 VDC
360 mA @ 12 V,
195 mA @ 24 V
12 to 48 VDC
420 mA @ 12 V,
215 mA @ 24 V
12 to 48 VDC
500 mA @ 12 V,
250 mA @ 24 V
12 to 48 VDC
510 mA @ 12 V,
260 mA @ 24 V
12 to 48 VDC
470 mA @ 12 V,
210 mA @ 24 V
12 to 48 VDC
490 mA @ 12 V,
250 mA @ 24 V
12 to 48 VDC
440 mA @ 12 V,
200 mA @ 24 V
Standards and Certifications
Safety
Hazardous Location
EMC
EMI
EMS
Marine
Shock
Freefal
Vibration
UL 508, UL 60950-1, EN 60950-1
UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024, EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN
61000-4-8, EN 61000-4-11
DNV
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Reliability
Buzzer, RTC, WDT
MTBF
Warranty
9-2
P
183,747 hrs
195,614 hrs
5 years (see www.moxa.com/warranty)
w w w. m o x a . c o m
183,747 hrs
195,614 hrs
info@moxa.com
183,747 hrs
195,614 hrs
194,765 hrs
Device Connectivity
Wireless Device Servers
NPort® W2150A
NPort® W2150A-T
NPort® W2250A
NPort® W2250A-T
WLAN Interface
IEEE 802.11a/g/b
Radio Frequency Type
WEP
WPA, WPA2, 802.11i
Encryption
Max. Transmission Rate
Max. Transmission Distance
P
DSSS/OFDM
P
P
128-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPV2, EAP-TTLS/PAP, EAP-TTLS/CHAP, EAP-TTLS/MSCHAP, EAP-TTLS/
MSCHAPV2, EAP-TTLS/EAP-MSCHAPV2, EAP-TTLS/EAP-GTC, EAP-TTLS/EAP-MD5, LEAP
54 Mbps
100 m
9
LAN Interface
Serial-to-Ethernet Device Servers > Product Selection Guide
Ethernet Ports
1.5 KV Magnetic Isolation Protection
1 x 10/100 Mbps (RJ45)
P
Serial Interface
Number of Ports
Serial Standards
Connector
Serial Communication Parameters
Flow Control
Baudrate
Serial Data Log
1
2
RS-232/422/485
DB9-M
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
64 KB
Software
Network Protocols
Configuration Options
Management
Secure Configuration Options
Utilities
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, SNTP, SSH, HTTPS
Web Console, Serial Console, Telnet Console, Windows Utility
SNMP MIB-II
HTTPS, SSH
NPort Search Utility and NPort Windows Driver Manager
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/ 7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Housing
Weight
Dimensions
Aluminum
780 g
77 x 111 x 26 mm
Environmental Limits
Operating
Temperature
Standard
Temperature
Wide
Temperature
Operating Humidity
Storage Temperature
0 to 55°C
-40 to 75°C
5 to 95% (non-condensing)
-40 to 85°C
Power Requirements
Input Voltage
Power Consumption
12 to 48 VDC
237 mA @ 12 V, 125 mA @ 24 V, 50 mA @ 48 V
Standards and Certifications
Safety
EMC
EMI
EMS
Radio
UL 60950-1, EN 60950-1
CE, FCC
FCC Part 15 (Subpart B Class A, Subpart C, Subpart E), VCCI
EN 55022 Class A
CE (ETSI EN 301 893, ETSI EN 300 328), ARIB RCR STD-33, ARIB STD-66
Reliability
Warranty
5 years (see www.moxa.com/warranty)
info@moxa.com
w w w. m o x a . c o m
9-3
Serial-to-Ethernet Device Servers
ZigBee Device Servers
NPort® Z2150
NPort® Z2150-T
9
NPort® Z3150
NPort® Z3150-T
ZigBee Interface
RF Standard
Frequency Band
RF Data Rate
Encryption
Network Topology
Transmission Distance
802.15.4
2.4 GHz
250 Kbps
128-bit AES
Star, Mesh, Cluster tree
100 m
Serial-to-Ethernet Device Servers > Product Selection Guide
Ethernet Interface (NPort Z3150 only)
Ethernet Ports
1.5 KV Magnetic Isolation Protection
–
–
1 x 10/100 Mbps (RJ45)

Serial Interface
Number of Ports
Serial Standards
Connector
1
RS-232/422/485
DB9-M
Serial Communication Parameters
Data Bits: 8; Stop Bits: 1, 2; Parity: None, Even, Odd
Flow Control
Baudrate
RTS/CTS
50 bps to 230.4 Kbps
Data Bits: 5, 6, 7, 8; Stop Bits: 1, 2; Parity: None, Even, Odd, Mark,
Space
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
Software
Configuration
Management
Secure Configuration Options
Utilities
Utility
–
–
ZigBee Configuration Utility
Windows Real COM Drivers
Windows 2000, Windowns XP/2003/Vista/2008/7 x86/x64
Fixed TTY Drivers
–
Linux Real TTY Drivers
–
Web Console
SNMP v1
HTTPS, SSH
NPort Search Utility and Driver Manager
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/ 7 x86/
x64, Embedded CE 5.0/6.0, XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2,
QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux 2.4.x, 2.6.x, 3.0.x
Aluminum
340g
52 x 80 x 22 mm
780g
77 x 111 x 26 mm
Physical Characteristics
Housing
Weight
Dimensions
Environmental Limits
Operating Temperature
Operating Humidity
Storage Temperature
Standard Temperature
Wide Temperature
0 to 55°C
-40 to 75°C
5 to 95% (non-condensing)
-40 to 85°C
Power Requirements
Input Voltage
Power Consumption
12 to 48 VDC
560 mA @ 12 V, 294 mA @ 24 V, 162 mA @ 48 V
Standards and Certifications
Safety
EMC
EMI
EMS
Radio
UL 60950-1, EN 60950-1
CE, FCC
FCC Part 15 (Subpart B Class A, Subpart C, Subpart E), VCCI
EN 55022 Class A
CE (ETSI EN 301 893, ETSI EN 300 328), ARIB RCR STD-33, ARIB STD-66
Reliability
Warranty
9-2
5 years (see www.moxa.com/warranty)
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
NPort® S8455 Series
Combo switch / serial device servers
››4-port RS-232/422/485 serial device server
• Serial QoS for configuring serial data transmission priority
• 2 KV (DC) isolation protection for each serial port
• Adjustable pull high/low resistor for RS-485 ports
5-port managed Ethernet switch built in
• Two fiber Ethernet ports and three Ethernet ports
• Ethernet redundancy with Turbo Ring and Turbo Chain (recovery
time < 20 ms) or RSTP/STP (IEEE 802.1w/D) supported
• QoS, IGMP-snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3,
RMON supported
Surge protection for serial, power, and Ethernet
››
Overview
The NPort® S8455 series combines an industrial device server with
a full-function managed Ethernet switch by integrating 2 fiber ports,
3 Ethernet ports, and 4 RS-232/422/485 serial ports, allowing you
to easily install, manage, and maintain the product. Combining a
device server and switch in one product allows you to save space in
your cabinet, reduce overall power consumption, and reduce costs,
since you will not need to purchase a switch and serial device server
separately.
Supports the Full Range of NPort® 5000 Series Device Server Functions
The NPort® S8455 series supports the complete array of NPort®
5000 series device server functions. You can network your existing
serial devices by connecting up to 4 serial devices through each of the
5 Ethernet ports, with only basic configuration required. In addition,
data transmission between the serial and Ethernet interfaces is
bi-directional.
Full-function Managed Ethernet Switch
The NPort® S8455 series has a built-in full-function managed
Ethernet switch that supports QoS, IGMP-snooping/GMRP, VLAN, Port
Trunking, SNMPv1/v2c/v3, and IEEE 802.1X, allowing you to handle
virtually any kind of application. Ethernet redundancy, which is used
to increase the reliability and availability of your industrial Ethernet
network, is provided by Moxa’s own Turbo Ring® and Turbo Chain
technology (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D).
Serial-to-Ethernet Device Servers > NPort® S8455 Series
››
9
Ring Redundancy at the Device Level
Device level communication networks for industrial automation
are very critical since they are used to control and monitor device
processes. The reliability of these communications depends on ring
redundancy at the device level. which is
designed to provide fast network fault
detection and reconfiguration in order
to support the most demanding control
applications.
STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2
redundancy protocols. This all-in-one design can be used to optimize
and simplify your device network, and enhance reliability.
S8455
The NPort® S8455 series integrates a
full function NPort® device server with
an industrial switch to carry serial and
Ethernet devices at the same time. In
addition, the NPort® S8455 can also
achieve ring redundancy with standard
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Rugged Design with Complete Protection
Appearance
UL508 Safety
The NPort® S8455 series complies with the UL
508 standard, which covers safety requirements for
industrial control equipment.
Level 4 ESD
Reset button
Serial console
4 DIP switches for
Turbo Ring settings
The NPort® S8455 series supports high level, 8/15
KV, ESD protection to prevent damage from static
electricity.
Full Surge Protection
9
Power input (terminal block)
Relay output, DI (terminal block)
LED indicators
Fiber port
Ethernet port (RJ45)
Serial port (DB9 male)
The NPort® S8455 series is equipped with surge
protection for power, Ethernet interface, and serial
interface to protect against voltage spikes.
2 KV Serial Isolation
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Each serial port is protected by 2 KV of isolation
protection to guard against harmful currents.
General Specifications
Port Summary
Serial Ports: 4 RS-232/422/485 ports
Ethernet Switch Ports:
NPort S8455: 3 RJ45 copper ports and 2 multi-mode fiber ports
NPort S8458: 4 RJ45 copper ports and 4 multi-mode fiber ports
Console Ports: 1 (8-pin RJ45 connector)
Physical Characteristics
Housing: Metal
Weight: 995 g
Dimensions: 73.1 x 134 x 125 mm (2.88 x 5.27 x 4.92 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models:
NPort S8455-T: -40 to 75° C (-40 to 167° F)
NPort S8458-T: -40 to 85° C (-40 to 185° F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 935 mA @ 12 V, 470 mA @ 24 V
Standards and Certifications
Safety: UL 508, UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
IEC 61000-4-2 (ESD) Level 4,
IEC 61000-4-4 (EFT) Level 4,
IEC 61000-4-5 (Surge)
Level 1 for serial ports,
Level 2 for LAN ports,
Level 3 for power lines
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Device Server Specifications
Serial Interface
Number of Ports: 4
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Line Protection:
• 15 KV ESD protection for all signals
• 2 KV isolation protection
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Terminator for RS-485: 55 Ω, 120 Ω
Console Port: Dedicated RS-232 console port (8-pin RJ45)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
9-14
w w w. m o x a . c o m
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Configuration Options: Web Console, Telnet Console, Serial Console,
Windows Search Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP, RFC2217
Management: SNMP MIB-II
IP Routing: Static, RIP-I, RIP-II
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 200,951 hrs
info@moxa.com
Device Connectivity
Ethernet Switch Specifications
Optical Fiber Interface
Ethernet Interface
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1x for Authentication
IEEE 802.3ad for Port Trunk with LACP
Network Protocols: ICMP, IP, TCP, UDP, ARP, Telnet, DNS, HTTP,
SMTP, SNTP, IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
interface
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-14 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
9
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Switch Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDI-X connection
DIP Switches: Turbo Ring, Master, Coupler, Reserve
Alarm Contact: 2 relay outputs with current carrying capacity of 1A @
24 VDC
Dimensions
Unit: mm (inch)
2 (0.08)
134 (5.28)
143 (5.64)
73 (2.87)
Pin Assignment
DB9 male connector
1 2 3 4 5
6 7 8 9
2 (0.08)
105 (4.13)
113.8 (4.48)
125 (4.92)
Serial Port (DB9 male connector)
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
Console Port (RJ45)
8-pin RJ45 connector
1
8
Ethernet Port (RJ45)
PIN
RS-232
PIN
Signal
1
2
3
4
5
6
7
8
DSR
RTS
GND
TxD
RxD
DCD
CTS
RTS
1
2
3
4
5
6
7
8
RXD+
RXDTXD+
–
–
TXD-
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Switch Properties
100BaseFX
Multi-mode
Ordering Information
Available Models
NPort S8455I-MM-SC: 4 RS-232/422/485 ports, 3 10/100M Ethernet ports, 2 100M multi-mode fiber
ports with SC connector, 15 KV ESD, 12-48 VDC, 2 KV isolation protection, 0 to 60°C operating
temperature
NPort S8455I-SS-SC: 4 RS-232/422/485 ports, 3 10/100M Ethernet ports, 2 100M single-mode fiber ports
with SC connector, 15 KV ESD, 12-48 VDC, 2 KV isolation protection, 0 to 60°C operating temperature
NPort S8455I-MM-SC-T: 4 RS-232/422/485 ports, 3 10/100M Ethernet ports, 2 100M multi-mode fiber
ports with SC connector, 15 KV ESD, 12-48 VDC, 2 KV isolation protection, -40 to 75°C operating
temperature
NPort S8455I-SS-SC-T: 4 RS-232/422/485 ports, 3 10/100M Ethernet ports, 2 100M single-mode fiber
ports with SC connector, 15 KV ESD, 12-48 VDC, 2 KV isolation protection, -40 to 75°C operating
temperature
Package Checklist
•
•
•
•
NPort S8455 device server
Documentation and software CD
Quick installation guide (printed)
Warranty card
Optional Accessories (can be purchased separately)
Mxview: Moxa industrial network management software
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® S8458 Series
Combo switch / serial device server
››4-port RS-232/422/485 serial device server
• Serial QoS for confi guring serial data transmission priority
››8-port managed Ethernet switch built in
• 10/100BaseT(X)(RJ45 connector), 100BaseFX (single-mode SC
connector)
• Ethernet redundancy with Turbo Ring and Turbo Chain (recovery
time < 20 ms)or RSTP/STP (IEEE 802.1w/D) supported
• QoS, IGMP-snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3,
RMON supported
Surge protection for serial, power, and Ethernet
9
››
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
The NPort® S8458 series combines an industrial device server with
a full-function managed Ethernet switch by integrating 4 fiber ports,
4 Ethernet ports, and 4 RS-232/422/485 serial ports, allowing you
to easily install, manage, and maintain the product. Combining a
device server and switch in one product allows you to save space in
your cabinet, reduce overall power consumption, and reduce costs,
since you will not need to purchase a switch and serial device server
separately.
Supports the Full Range of NPort® Series Device Server Functions
The NPort® S8458 series supports the complete array of NPort®
series device server functions. You can network your existing serial
devices by connecting up to 4 serial devices through each of the 8
Ethernet ports, with only basic configuration required. In addition, data
transmission between the serial and Ethernet interfaces is
bi-directional.
Full-function Managed Ethernet Switch
The NPort® S8458 series has a built-in full-function managed
Ethernet switch that supports QoS, IGMP-snooping/GMRP, VLAN, Port
Trunking, SNMPv1/v2c/v3, and IEEE 802.1X, allowing you to handle
virtually any kind of application. Ethernet redundancy, which is used
to increase the reliability and availability of your industrial Ethernet
network, is provided by Moxa’s own Turbo Ring and Turbo Chain
technology (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D).
Ring Redundancy at the Device Level
Device level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The
reliability of these communications depends on ring redundancy at the device level. which is designed to provide fast network fault detection and
reconfiguration in order to support the most demanding control applications.
The NPort® S8458 series integrates a full function NPort® device server with an industrial switch to carry serial and Ethernet devices at the same
time. In addition, the NPort® S8458 can also achieve ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain
redundancy protocols. This all-in-one design can be used to optimize and simplify your device network, and enhance reliability.
S8458
9-14
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Rugged Design with Complete Protection
UL508 Safety
Full Surge Protection
The NPort® S8458 series complies with the UL
508 standard, which covers safety requirements for
industrial control equipment.
The NPort® S8458 series is equipped with surge
protection for power, Ethernet interface, and serial
interface to protect against voltage spikes.
Level 4 ESD
The NPort® S8458 series supports high level, 15
KV, ESD protection to prevent damage from static
electricity.
General Specifications
Port Summary
Regulatory Approvals
Safety: UL60950-1
EMC: FCC Part 15 Subpart B Class A, CE Class A
EMI: EN 55022
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 Level 5,
EN 61000-4-11
Physical Characteristics
Housing: Metal IP40 protection
Dimensions: 93 × 144 × 125 mm (3.66 × 5.64 × 4.92 in)
Environmental Limits
Operating Temperature: -40 to 85° C (-40 to 185° F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: 12 to 48 VDC
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Device Server Specifications
Serial Interface
Number of Ports: 4
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 15 KV ESD protection for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Terminator for RS-485: 120 Ω
Console Port: Dedicated RS-232 console port (8-pin RJ45)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Software
Configuration Options: Web Console, Telnet Console, Serial Console,
Windows Search Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP, RFC2217
Management: SNMP MIB-II
IP Routing: Static, RIP-I, RIP-II
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Serial Ports: 4 RS-232/422/485 ports
Ethernet Switch Ports: 4 RJ45 copper ports, 4 SC fiber ports
Console Ports: 1 (8-pin RJ45 connector)
9
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Ethernet Switch Specifications
Ethernet Interface
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1x for Authentication
IEEE 802.3ad for Port Trunk with LACP
Network Protocols: ICMP, IP, TCP, UDP, ARP, Telnet, DNS, HTTP,
SMTP, SNTP, IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
interface
Optical Fiber Interface
100BaseFX
Wavelength
Max. TX
Min. TX
RX Sensitivity
Link Budget
Typical Distance
Saturation
Single-mode
1300 nm
1310 nm
-14 dBm
0 dBm
-20 dBm
-5 dBm
-32 dBm
-34 dBm
12 dB
5 km a
4 km b
29 dB
40 km c
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Switch Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDI-X connection
DIP Switches: Turbo Ring, Master, Coupler, Reserve
Alarm Contact: 2 relay outputs with current carrying capacity of 1A @
24 VDC
Pin Assignment
DB9 male connector
1 2 3 4 5
6 7 8 9
Serial Port (DB9 male connector)
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
Console Port (RJ45)
8-pin RJ45 connector
1
8
Ethernet Port (RJ45)
PIN
RS-232
PIN
Signal
1
DSR
1
RXD+
2
RTS
2
RXD-
3
GND
3
TXD+
4
TxD
4
–
5
RxD
5
–
6
DCD
6
TXD-
7
CTS
7
8
RTS
8
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
•
•
•
•
•
NPort® S8458-4S-SC-T: 4 RS-232/422/485 ports, 4 10/100M Ethernet ports, 4 100M single-mode fiber
ports with SC connector, 12-48 VDC, -40 to 85°C operating temperature
MXview: Moxa industrial network management software
9-14
Multi-mode
w w w. m o x a . c o m
info@moxa.com
1 NPort S8458
Two power jack to TB power cables
Documentation and software CD
Quick installation guide (printed)
Warranty card
Device Connectivity
NPort® 5100A Series
1-port RS-232/422/485 serial device servers
››World’s lowest power consumption, only 1 W
››Speedy 3-step web-based configuration
››Surge protection for serial, Ethernet, and power lines
››COM port grouping and UDP multicast applications
››Screw connectors for secure installation
››Real COM/TTY drivers for Windows and Linux
››Standard TCP/IP interface and versatile TCP and UDP operation
modes
The NPort® 5100A device servers are designed to make serial devices
network-ready in an instant and give your PC software direct access
to serial devices from anywhere on the network. The NPort® 5100A
device servers are ultra lean, ruggedized, and user friendly, making
simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet
SoC with RAM and Flash embedded. With the MiiNe inside, the
NPort® 5110A series becomes the world’s only device server with
power consumption less than 1 W. The NPort® 5100A series saves
at least 50% on power consumption compared to existing solutions
on the market, helping engineers meet
the tough environmental compliance
challenges found in today’s industrial
environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort® 5100A’s serial, power, and Ethernet lines, is
tested and proven compliant with IEC 61000-4-5. This state-of-the-art
surge protection provides a robust serialto-Ethernet solution that can protect
electrical devices from voltage spikes and
withstand electrically noisy environmental
conditions.
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
9
3-step Web-based Configuration
The NPort® 5100A’s 3-step web-based configuration tool is
straightforward and user-friendly. The NPort® 5100A’s web console
guides users through 3 simple configuration steps that are necessary
to activate the serial-to-Ethernet application. With this speedy 3-step
web-based configuration, a user only needs to spend an average of
30 seconds to complete the NPort®
settings and enable the application,
saving a great amount of time and
effort.
Easy to Troubleshoot
NPort® 5100A device servers support SNMP, which can be used to
monitor all units over Ethernet. Each unit can be configured to send
trap messages automatically to the SNMP manager when user-defined
errors are encountered. For users who do not use SNMP manager, an
e-mail alert can be sent instead. Users can define the trigger for the
alerts using Moxa’s Windows utility, or the web console. For example,
alerts can be triggered by a warm start, a cold start, or a password
change.
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Appearance
NPort® 5150A
NPort® 5130A
NPort® 5110A
Ethernet
Ethernet
RJ45 10/100 Mbps
Reset button
Power input
RJ45 10/100 Mbps
Power input
Reset button
Reset button
Ethernet
RJ45 10/100 Mbps
DK-35A DIN-Rail Kit
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Available Accessory
RS-232/422/485
RS-422/485
RS-232
Specifications
Ethernet Interface
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i, Mac 10.3
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Physical Characteristics
Serial Interface
Number of Ports: 1
Serial Standards:
NPort 5110A: RS-232
NPort 5130A: RS-422/485
NPort 5150A: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 15 KV ESD protection for all signals, Level 1
Surge, EN61000-4-5
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, IGMP V1/2
Configuration Options: Web Console (with new Quick Setup), Serial
Console (NPort 5110A/5150A only), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64
9-14
Screw power jack
12 to 48 VDC
Screw power jack
12 to 48 VDC
Screw power jack
12 to 48 VDC
9
Power input
w w w. m o x a . c o m
Housing: Metal
Weight: 340 g
Dimensions:
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort 5110A: 82.5 mA @ 12 V, 47.3 mA @ 24 V
NPort 5130A: 89.1 mA @ 12 V, 49.5 mA @ 24 V
NPort 5150A: 92.4 mA @ 12 V, 52.8 mA @ 24 V
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Power Line Protection:
EN 61000-4-4(EFT) Level 2,
EN 61000-4-5(Surge) Level 3
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 2,231,530 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
Device Connectivity
Dimensions
Unit: mm (inch)
NPort® 5130A
∅7
(0.28)
Port 1 RS-422/485
43.3 (1.70)
22.0 (0.87)
43.3 (1.70)
∅7
(0.28)
21.3
(0.8)
12.5 (0.49)
25 (0.98)
43.3 (1.70)
52 (2.05)
63 (2.48)
75.2 (2.96)
52 (2.05)
63 (2.48)
75.2 (2.96)
Pin Assignment
DB9 male connector
1 2 3 4 5
6 7 8 9
NPort® 5110A (RS-232)
NPort® 5130A (RS-422/485)
NPort® 5150A (RS-232/422/485)
PIN
RS-232
PIN
RS-422/485-4w
RS-485-2w
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
DCD
1
TxD-(A)
–
1
DCD
TxD-(A)
–
2
RxD
2
TxD+(B)
–
2
RxD
TxD+(B)
–
3
TxD
3
RxD+(B)
Data+(B)
3
TxD
RxD+(B)
Data+(B)
4
DTR
4
RxD-(A)
Data-(A)
4
DTR
RxD-(A)
Data-(A)
5
GND
5
GND
GND
5
GND
GND
GND
6
DSR
6
–
–
6
DSR
–
–
7
RTS
7
–
–
7
RTS
–
–
8
CTS
8
–
–
8
CTS
–
–
Ordering Information
Available Models
Package Checklist
NPort 5110A: 1-port RS-232 device server, 0 to 60°C operating temperature
NPort 5130A: 1-port RS-422/485 device server, 0 to 60°C operating temperature
NPort 5150A: 1-port RS-232/422/485 device server, 0 to 60°C operating temperature
NPort 5110A-T: 1-port RS-232 device server, -40 to 75°C operating temperature
NPort 5130A-T: 1-port RS-422/485 device server, -40 to 75°C operating temperature
NPort 5150A-T: 1-port RS-232/422/485 device server, -40 to 75°C operating temperature
•
•
•
•
•
NPort 5100A device server
Power adaptor (excluding T models)
Documentation and software CD
Quick installation guide (printed)
Warranty card
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
52 (2.05)
63 (2.48)
75.2 (2.96)
ø7
(0.28)
21.3
(0.8)
Port 1 RS-232/422/485
22.0 (0.87)
21.3
(0.8)
A
ø6
(0.24)
ø4
(0.16)
12-48
22.0 (0.87)
80 (3.15)
12.5 (0.49)
25 (0.98)
80 (3.15)
A
∅6
(0.24)
∅4
(0.16)
12-48
80 (3.15)
∅6
(0.24)
∅4
(0.16)
12-48
NPort® 5150A
12.5 (0.49)
25 (0.98)
NPort® 5110A
Optional Accessories (can be purchased separately)
DK-35A: Mounting Kit for 35-mm DIN-Rail
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® 5100 Series
1-port RS-232/422/485 serial device servers
››Small size for easy installation
››Real COM/TTY drivers for Windows and Linux
››Standard TCP/IP interface and versatile operation modes
››Easy-to-use Windows utility for configuring multiple device servers
››Built-in 15 KV ESD protection for all serial signals
››SNMP MIB-II for network management
››Configure by Telnet or web browser
››Adjustable termination resistor for RS-485 ports
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
See also NPort 5100A, p. 9-19
Specifications
Ethernet Interface
Physical Characteristics
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Housing: Metal
Weight: 340 g
Dimensions:
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Serial Interface
Number of Ports: 1
Serial Standards:
NPort 5110: RS-232
NPort 5130: RS-422/485
NPort 5150: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 15 KV ESD protection for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate:
NPort 5110: 110 bps to 230.4 Kbps
NPort 5130/5150: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
w w w. m o x a . c o m
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -20 to 75°C (-4 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort 5110: 128.7 mA @ 12 V, 72 mA @ 24 V
NPort 5130/5150: 200 mA @ 12 V, 106 mA @ 24 V
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
NPort 5110: 279,122 hrs
NPort 5130: 246,505 hrs
NPort 5150: 246,034 hrs
Warranty
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP
Configuration Options: Web Console, Serial Console (NPort
5110/5150 only), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
9-14
Environmental Limits
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
Device Connectivity
Appearance
NPort® 5150
NPort® 5110
NPort® 5130
Ethernet
RJ45 10/100 Mbps
Reset button
Power input
Power jack
12 to 48 VDC
Ethernet
RJ45 10/100 Mbps
Reset button
Power input
Power jack 12 to 48 VDC
Power input
Power jack
12 to 48 VDC
Reset button
Ethernet
RJ45 10/100 Mbps
DK-35A DIN-Rail Kit
9
Available Accessory
RS-232
RS-422/485
NPort® 5110
NPort® 5130
ø6
(0.24)
ø6
(0.24)
12-48
ø4
ø4
(0.16)
ø7
(0.28)
ø7
(0.28)
21.3
(0.8)
ø7
(0.28)
21.3
(0.8)
Port 1 RS-422/485
Port 1 RS-232/422/485
52 (2.05)
63 (2.48)
75.2 (2.96)
43.3 (1.70)
22.0 (0.87)
22.0 (0.87)
43.3 (1.70)
22.0 (0.87)
43.3 (1.70)
12.5 (0.49)
25 (0.98)
80 (3.15)
12.5 (0.49)
25 (0.98)
(0.16)
12.5 (0.49)
25 (0.98)
80 (3.15)
(0.16)
21.3
(0.8)
ø6
(0.24)
12-48
ø4
80 (3.15)
12-48
Unit: mm (inch)
NPort® 5150
52 (2.05)
63 (2.48)
75.2 (2.96)
52 (2.05)
63 (2.48)
75.2 (2.96)
Pin Assignment
DB9 male connector
1 2 3 4 5
6 7 8 9
NPort® 5110 (RS-232)
NPort® 5130 (RS-422/485)
NPort® 5150 (RS-232/422/485)
PIN
RS-232
PIN
RS-422/485-4w
RS-485-2w
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
1
2
3
4
5
6
7
8
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
Serial-to-Ethernet Device Servers > NPort® S8455 Series
RS-232/422/485
Dimensions
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
•
•
•
•
•
NPort 5110: 1-port RS-232 device server, 0 to 55°C operating temperature
NPort 5130: 1-port RS-422/485 device server, 0 to 55°C operating temperature
NPort 5150: 1-port RS-232/422/485 device server, 0 to 55°C operating temperature
NPort 5110-T: 1-port RS-232 device server, -40 to 75°C operating temperature
DK-35A: Mounting Kit for 35-mm DIN-Rail
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
info@moxa.com
NPort 5100 device server
Power adaptor (excluding T models)
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® P5150A Series
1-port RS-232/422/485 PoE serial device servers
››IEEE 802.3af-compliant PoE PD equipment
››Speedy 3-step web-based configuration
››Surge protection for serial, Ethernet, and power lines
››COM port grouping and UDP multicast applications
››Screw connectors for secure installation
››Real COM/TTY drivers for Windows and Linux
››Standard TCP/IP interface and versatile TCP and UDP operation
9
modes
Power over Ethernet
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
give your PC software direct access to serial devices from anywhere
on the network. The NPort® P5150A device servers are ultra lean,
ruggedized, and user friendly, making simple and reliable serial to
Ethernet solutions possible.
NPort® P5150A device servers are designed to make serial devices
network-ready in an instant. It is a PD device and is IEEE 802.3af
compliant, so it can by powered by a PoE PSE device without an
additional power supply. Use the NPort® P5150A device servers to
Surge-protected Serial, Ethernet, and Power Lines
art surge protection provides a robust
serial-to-Ethernet solution that can protect
electrical devices from voltage spikes and
withstand electrically noisy environmental
conditions.
Surge, which is typically caused by high voltages that result from
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort® P5150A’s serial, power, and Ethernet lines, is
tested and proven compliant with IEC 61000-4-5. This state-of-the-
3-step Web-based Configuration
web-based configuration, a user only needs
to spend an average of 30 seconds to
complete the NPort® settings and enable the
application, saving a great amount of time
and effort.
The NPort® P5150A’s 3-step web-based configuration tool is
straightforward and user-friendly. The NPort® P5150A’s web console
guides users through 3 simple configuration steps that are necessary
to activate the serial-to-Ethernet application. With this speedy 3-step
Easy to Troubleshoot
e-mail alert can be sent instead. Users can define the trigger for the
alerts using Moxa’s Windows utility, or the web console. For example,
alerts can be triggered by a warm start, a cold start, or a password
change.
NPort® P5150A device servers support SNMP, which can be used to
monitor all units over Ethernet. Each unit can be configured to send
trap messages automatically to the SNMP manager when user-defined
errors are encountered. For users who do not use SNMP manager, an
Appearance
NPort® P5150A
Power input
Ethernet
Screw power jack
12 to 48 VDC
RJ45 PoE
10/100 Mbps
Reset button
DK-35A DIN-Rail Kit
Available Accessory
RS-232/422/485
9-14
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Specifications
Ethernet Interface
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i, Mac 10.3
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Physical Characteristics
Serial Interface
Number of Ports: 1
Serial Standards:
NPort P5150A: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 15 KV ESD protection for all signals, Level 2
Surge, EN61000-4-5
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Communication Parameters
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, IGMP V1/2
Configuration Options: Web Console (with new Quick Setup), Serial
Console, Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64
Dimensions
Unit: mm (inch)
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Power Line Protection:
EN 61000-4-4(EFT) Level 2,
EN 61000-4-5(Surge) Level 3
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 2,231,530 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Pin Assignment
DB9 male connector
26 (1.02)
1 2 3 4 5
111 (4.37)
115.5 (4.55)
25 (0.98)
43 (1.69)
100 (3.94)
88 (3.46)
77 (3.03)
NPort® P5150A (RS-232/422/485)
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
DCD
TxD-(A)
–
2
RxD
TxD+(B)
–
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
6 7 8 9
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Input Voltage: 12 to 48 VDC (supplied by power adapter) or 48 VDC
(supplied by PoE)
Power Consumption:
125 mA @ 12 V, 40 mA @ 48 VDC (supplied by power adapter)
180 mA @ 48 V (supplied by PoE)
Serial Signals
5.5 (0.22)
Environmental Limits
Power Requirements
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
NPort® P5150A
Housing: Metal
Weight: 300 g
Dimensions:
Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Ordering Information
Available Models
NPort P5150A: 1-port RS-232/422/485 PoE device server, 0 to 60°C operating temperature
Optional Accessories (can be purchased separately)
DK-35A: Mounting Kit for 35-mm DIN-Rail
info@moxa.com
Package Checklist
•
•
•
•
•
NPort P5150A device server
4 stick-on pads
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® DE-211/311
1-port RS-232/422/485 serial device servers
››3-in-1 serial port: RS-232, RS-422, or RS-485
››Versatile operation modes, including TCP Server, TCP Client, UDP,
Ethernet Modem, and Pair Connection
››Real COM/TTY drivers for Windows and Linux
››10M and 100M Ethernet speeds detected automatically
››2-wire RS-485 with patented Automatic Data Direction Control
(ADDC®)
››Built-in 15 KV ESD protection for all serial signals
NPort® DE-311
9
NPort® DE-211
Serial-to-Ethernet Device Servers > NPort® S8455 Series
See also NPort 5100A, p. 9-19
Overview
The NPort® DE-211 and DE-311 are 1-port serial device servers that
support RS-232, RS-422, 4-wire RS-485, and 2-wire RS-485. The
DE-211 supports 10 Mbps Ethernet connections and has a DB25
female connector for the serial port. The DE-311 supports 10/100
Specifications
Ethernet Interface
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Number of Ports: 1
Speed:
NPort DE-211: 10 Mbps, auto MDI/MDIX
NPort DE-311: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Physical Characteristics
Serial Interface
Number of Ports: 1
Serial Standards: RS-232/422/485 (selectable by DIP Switch)
Connector:
NPort DE-211: DB25 female
NPort DE-311: DB9 female
Serial Line Protection: 15 KV ESD protection for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 150 bps to 230.4 Kbps
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage:
DE-211: 12 to 30 VDC
DE-311: 9 to 30 VDC
Power Consumption:
NPort DE-211: 180 mA @ 12 V, 100 mA @ 24 V
NPort DE-311: 300 mA @ 9 V, 150 mA @ 24 V
Reliability
Network Protocols: DHCP, BOOTP, Telnet, TCP, UDP, IP, ICMP, ARP
Configuration Options: Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008 x86/x64, Embedded CE 5.0/6.0, XP Embedded
w w w. m o x a . c o m
Environmental Limits
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Medical: EN 60601-1-2 Class B, EN 55011 (DE-311 only)
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND (DE-211 only)
RS-485-2w: Data+, Data-, GND
Software
Housing: Metal
Weight: 480 g
Dimensions:
Without ears: 67 x 100.4 x 22 mm (2.64 x 3.95 x 0.87 in)
With ears: 90.2 x 100.4 x 22 mm (3.55 x 3.95 x 0.87 in)
Standards and Certifications
Serial Signals
9-14
Mbps Ethernet connections and has a DB9 female connector for the
serial port.
Both device servers are ideal for applications that involve information
display boards, PLCs, flow meters, gas meters, CNC machines, and
biometric identification card readers.
MTBF (mean time between failures):
NPort DE-211: 347,822 hrs
NPort DE-311: 225,529 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
Device Connectivity
Dimensions
Unit: mm (inch)
ON
DIP
1 2
22.0
(0.87)
3
4
22.0
(0.87)
NPort® DE-211
22.0
(0.87)
NPort® DE-311
22.0
(0.87)
RESET 10/100M
Ethernet
DC-IN
O4
(0.16)
PWR
Link
Serial
Connection SW2
Console
(19200,N,8,1)
SW3
OFF
OFF
RS-232
OFF
ON
OFF
O4
(0.16)
Link
Data
Comm.
100.4 (3.95)
Serial Rx
Express
DE-211 RS-232/422/485 Device Server
Interface Mode
O7
(0.28)
RS-232
ON
OFF
RS-422
RS-485 by RTS
ON
ON
RS-485 ADDC
Serial
21.3
(0.8)
SW1
Serial
Connection
ON
RS-232
Console
OFF
Data
Comm
SW2 SW3 SW4
SW
25 (0.98)
Serial Tx
12.5
(0.49)
12.5
(0.49)
25 (0.98)
100.4 (3.95)
Express
ON
O6
(0.24)
Ready
DE-311 RS-232/422/485 Device Server
SW1
RESET 10BaseT
Ethernet
PWR
Ready
21.3
(0.8)
SW
DC-IN
O6
(0.24)
Serial Interface Mode
OFF OFF
OFF
RS-232
OFF
ON
ON
RS-422
ON
OFF
ON
4-Wire RS-485 by RTS
ON
ON
ON
4-Wire RS-485 by ADDC
ON
OFF
OFF
2-Wire RS-485 by RTS
ON
ON
OFF
4-Wire RS-485 by ADDC
O7
(0.28)
Serial
22.0 (0.87)
1 2 3
22.0 (0.87)
42.3 (1.67)
67.0 (2.64)
67.0 (2.64)
78 (3.07)
78 (3.07)
90.2 (3.55)
90.2 (3.55)
Pin Assignment
NPort® DE-211
(RS-232/422/485, DB25 female connector)
NPort® DE-311
(RS-232/422/485, DB9 female connector)
5 4 3 2 1
25
RXDA(-) / DataA(-)
RXDB(+) / DataB(-)
DSR (in) 20
TXDA (-) 15
TXDB (+) 14
PIN
RS-232
RS-422
RS-485-2w
13 Power GND for 12-30 VDC
12 Unreg. 12-30 VDC (in)
1
DCD
RxD-(A)
–
2
TxD
RxD+(B)
–
10 Power GND for 5 VDC
9 Reg. +5 VDC (out)
8 DCD (in)
7 SGND
6 DTR (out)
5 RTS (out)
4 CTS (in)
3 TxD (out)
2 RxD (in)
1 Do not use this pin*
3
RxD
TxD+(B)
Data+(B)
4
DSR
TxD-(A)
Data-(A)
5
GND
GND
GND
6
DTR
CTS-(A)
–
7
CTS
CTS+(B)
–
8
RTS
RTS+(B)
–
9
–
RTS-(A)
–
9 8 7 6
Serial-to-Ethernet Device Servers > NPort® S8455 Series
42.3 (1.67)
ON
9
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
•
•
•
•
•
NPort DE-211: 1-port RS-232/422/485 device server with 10 Mbps Ethernet connection
NPort DE-311: 1-port RS-232/422/485 device server with 10/100 Mbps Ethernet connection
NP21101: DB25 male to DB9 female cable for RS-232 transmission, 30 cm (for DE-211)
NP21102: DB25 male to DB9 male cable for RS-232 transmission, 30 cm (for DE-211)
NP21103: DB25 male terminal block kit for RS-422/485 transmission (for DE-211)
TB-M25: DB25 male DIN-Rail wiring terminal (for DE-211)
TB-M9 (for DE-311): DB9 male DIN-Rail wiring terminal (for DE-311)
DK-35A: Mounting Kit for 35-mm DIN-Rail
info@moxa.com
NPort DE-211 or DE-311 device server
Power adapter
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® 5200A Series
2-port RS-232/422/485 serial device servers
››Speedy 3-step web-based configuration
››Surge protection for serial, Ethernet, and power lines
››COM port grouping and UDP multicast applications
››Screw connectors for secure installation
››Dual DC power inputs with power jack and terminal block
››Versatile TCP and UDP operation modes
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
The NPort® 5200A device servers are designed to make serial devices
network-ready in an instant and give your PC software direct access
to serial devices from anywhere on the network. The NPort® 5200A
device servers are ultra lean, ruggedized, and user friendly, making
simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet
SoC with RAM and Flash embedded. The NPort® 5200A series saves
at least 50% on power consumption compared to existing solutions
on the market, helping engineers meet the tough environmental
compliance challenges found in today’s
industrial environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort® 5200A’s serial, power, and Ethernet lines, is
tested and proven compliant with IEC 61000-4-5. This state-of-the-art
surge protection provides a robust serialto-Ethernet solution that can protect
electrical devices from voltage spikes and
withstand electrically noisy environmental
conditions.
3-step Web-based Configuration
The NPort® 5200A’s 3-step web-based configuration tool is
straightforward and user-friendly. The NPort® 5200A’s web console
guides users through 3 simple configuration steps that are necessary
to activate the serial-to-Ethernet application. With this speedy 3-step
web-based configuration, a user only needs to spend an average of
30 seconds to complete the NPort®
settings and enable the application,
saving a great amount of time and
effort.
COM Port Grouping
The NPort® 5200A’s COM Grouping function allows you to create a
COM Group and redirect data from it to several physical COM ports on
NPort device servers. With COM Grouping, you will be able to control
9-14
w w w. m o x a . c o m
multiple physical serial ports simultaneously by operating only one
COM port.
info@moxa.com
Device Connectivity
Appearance
NPort® 5250A
NPort® 5230A
NPort® 5210A
Power input (12 to 48 VDC)
Reset button
Ethernet
Screw power jack
Terminal block
RJ45 10/100 Mbps
Ethernet
Power input (12 to 48 VDC)
RJ45 10/100 Mbps
Terminal block
Screw power jack
Reset
button
Power input (12 to 48 VDC)
Screw power jack
Terminal block
Ethernet
RJ45 10/100 Mbps
Reset button
9
DK-35A DIN-Rail Kit
RS-232/422/485
RS-422/485
RS-232
Specifications
Ethernet Interface
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i, Mac 10.3
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Serial Interface
Physical Characteristics
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Ethernet Line Protection: EN 61000-4-5 (Surge) Level 2
Number of Ports: 2
Serial Standards:
NPort 5210A: RS-232
NPort 5230A: RS-422/485
NPort 5250A: RS-232/422/485
Connector:
NPort 5210A/5250A: DB9 male
NPort 5230A: Terminal Block (5 pins per port)
Serial Line Protection: 15 KV ESD protection for all signals, EN
61000-4-5 (Surge) Level 1
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 119 mA @ 12V, 65 mA @ 24V
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Power Line Protection:
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 3
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Housing: Metal
Weight: 340 g
Dimensions:
Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Available Accessory
Reliability
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, IGMP V1/2
Configuration Options: Web Console (with new Quick Setup), Serial
Console (NPort 5210A/5250A only), Telnet Console, Windows Utility
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 847,750 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Dimensions
Unit: mm (inch)
NPort® 5210A
NPort® 5230A
100 (3.94)
88 (3.46)
77 (3.03)
5.5 (0.22)
26 (1.02)
26 (1.02)
111 (4.37)
25 (0.98)
115.6 (4.55)
26 (1.02)
Serial-to-Ethernet Device Servers > NPort® S8455 Series
26 (1.02)
77 (3.03)
120.6 (4.75)
111 (4.37)
25 (0.98) 43 (1.69)
5.5 (0.22)
120.6 (4.75)
111 (4.37)
25 (0.98) 43 (1.69)
9
100 (3.94)
88 (3.46)
100 (3.94)
88 (3.46)
77 (3.03)
43 (1.69)
5.5 (0.22)
NPort® 5250A
Pin Assignment
NPort® 5250A (RS-232/422/485)
NPort® 5230A (RS-422/485)
NPort® 5210A (RS-232)
PIN
RS-232
RS-422/485-4w
RS-485-2w
PIN
RS-422/485-4w
RS-485-2w
PIN
RS-232
1
DCD
TxD-(A)
–
1
TxD+(B)
–
1
DCD
2
RxD
TxD+(B)
–
2
TxD-(A)
–
2
RxD
3
TxD
RxD+(B)
Data+(B)
3
RxD+(B)
Data+(B)
3
TxD
4
DTR
RxD-(A)
Data-(A)
4
RxD-(A)
Data-(A)
4
DTR
5
GND
GND
GND
5
GND
GND
5
GND
6
DSR
–
–
6
DSR
7
RTS
–
–
7
RTS
8
CTS
–
–
8
CTS
DB9 male connector
5-contact terminal block
DB9 male connector
1 2 3 4 5
1 2 3 4 5
1
2
3
4
5
6 7 8 9
6 7 8 9
Ordering Information
Available Models
NPort 5210A: 2-port RS-232 device server, 0 to 60°C operating temperature
NPort 5230A: 2-port RS-422/485 device server, 0 to 60°C operating temperature
NPort 5250A: 2-port RS-232/422/485 device server, 0 to 60°C operating temperature
NPort 5210A-T: 2-port RS-232 device server, -40 to 75°C operating temperature
NPort 5230A-T: 2-port RS-422/485 device server, -40 to 75°C operating temperature
NPort 5250A-T: 2-port RS-232/422/485 device server, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
Package Checklist
•
•
•
•
•
DK-35A: Mounting Kit for 35-mm DIN-Rail
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
9-14
w w w. m o x a . c o m
info@moxa.com
NPort 5200A device server
Power adaptor (excluding T models)
Documentation and software CD
Quick installation guide (printed)
Warranty card
Device Connectivity
NPort® 5200 Series
2-port RS-232/422/485 serial device servers
››Compact design for easy installation
››Socket modes: TCP server/TCP client/UDP
››Easy-to-use Windows utility for configuring multiple device servers
››Supports 10/100M Ethernet
››Patented ADDC® (Automatic Data Direction Control) for 2-wire and
4-wire RS-485
››Built-in 15 KV ESD protection for all serial signals
››SNMP MIB-II for network management
Specifications
Ethernet Interface
Software
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 2
Serial Standards:
NPort 5210: RS-232
NPort 5230: 1 RS-232 port, 1 RS-422/485 port
NPort 5232/5232I: RS-422/485
Connector:
NPort 5210: RJ45 (8 pins)
NPort 5230/5232/5232I: Terminal Block (5 contacts per port)
Serial Line Protection:
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5232I/5232I-T)
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS (RS-232 only), DTR/DSR (NPort 5210 only),
XON/XOFF
Baudrate: 110 bps to 230.4 Kbps
Serial Signals
RS-232:
NPort 5210: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
NPort 5230: TxD, RxD, RTS, CTS, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, SNTP
Configuration Options: Web Console, Serial Console (NPort
5210/5230 only), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Housing: Metal
Weight:
NPort 5210: 340 g
NPort 5230/5232: 360 g
NPort 5232I: 380 g
Dimensions:
NPort 5210/5230/5232:
Without ears: 67 x 100.4 x 22 mm (2.64 x 3.95 x 0.87 in)
With ears: 90 x 100.4 x 22 mm (3.54 x 3.95 x 0.87 in)
NPort 5232I:
Without ears: 67 x 100.4 x 35 mm (2.64 x 3.95 x 1.37 in)
With ears: 90 x 100.4 x 35 mm (3.54 x 3.95 x 1.37 in)
Serial-to-Ethernet Device Servers > NPort® S8455 Series
See also NPort 5200A, p.9-28
9
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort 5210: 325 mA @ 12 V, 190 mA @ 24 V
NPort 5230: 325 mA @ 12 V, 190 mA @ 24 V
NPort 5232: 280 mA @ 12 V, 150 mA @ 24 V
NPort 5232I: 509.4 mA @ 12 V, 200 mA @ 24 V
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Standards and Certifications
Reliability
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Marine: DNV
Medical: (NPort 5210 only)
EN 60601-1-2 Class B, EN 55011
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
NPort 5210: 134,850 hrs
NPort 5230: 106,955 hrs
NPort 5232: 102,344 hrs
NPort 5232I: 87,083 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Appearance
9
NPort® 5232
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Ethernet
RJ45 10/100 Mbps
Reset button
Power input
terminal block
12 to 48 VDC
NPort® 5230
Power input
terminal block
12 to 48 VDC
NPort® 5210
Ethernet
RJ45 10/100 Mbps
Reset
button
Power input
terminal block 12 to 48 VDC
Reset button
Ethernet
RJ45 10/100 Mbps
DK-35A DIN-Rail kit
Available Accessory
DIN-Rail kit
(optional)
RS-422/485
RS-232
8-pin RJ45, RS-232
RS-422/485
Dimensions
Unit: mm (inch)
NPort® 5210
NPort® 5230
22.0
(0.87)
V-
V+
RESET
12-48V
10/100M
Ethernet
Ready
V-
Ø4 (0.16)
Link
10/100M
Ethernet
Ready
Link
P2
Industrial RS-232 Device Server
12.5
(0.49)
5210
25 (0.98)
P2
100.4 (3.95)
RESET
P1
P1
5230
5210
Industrial RS-232/422/485 Device Server
Ø7 (0.28)
67 (2.64)
78 (3.07)
90.2 (3.55)
w w w. m o x a . c o m
info@moxa.com
GND
R-/D-
T+
T-
P2 RS-485/422
GND
CTS
Rx
Tx
22.0
(0.87)
42.3 (1.67)
RTS
P1 RS-232
P2 RS-232
P1 RS-232
R+/D+
21.3
(0.8)
9-14
V+
12-48V
Ø6 (0.24)
Device Connectivity
Dimensions
Unit: mm (inch)
NPort® 5232
NPort® 5232I
90 (3.54)
78 (3.07)
67 (2.64)
V+
V-
10/100M
Ethernet
RESET
12-48V
Ready
Lk
Link
P1
P1
P2
P2
10/100M
Ethernet
Ø4
(0.16)
Ø7
(0.28)
100.4 (3.95)
Industrial RS-422/485 Device Server
43 (1.69)
25 (0.98)
5232I
5210
5232
5210
Industrial RS-422/485 Device Server
9 (0.35)
RESET
28.7 (1.13)
V+
V-
12-48V
Ready
11.5 (0.45)
GND
R-/D-
T+
T-
R+/D+
GND
R-/D-
T+
P2 RS-485/422
T-
P1 RS-485/422
R+/D+
GND
R-/D-
T+
T-
R+/D+
GND
R-/D-
T+
R+/D+
T-
P2 RS-485/422
9 (0.35)
35 (1.38)
Pin Assignment
8-pin RJ45 connector
1
8
NPort® 5210/5210-T (RS-232)
PIN
RS-232
1
2
3
4
5
6
7
8
DSR (in)
RTS (out)
GND
TxD (out)
RxD (in)
DCD (in)
CTS (in)
DTR (out)
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Ø6
(0.24)
P1 RS-485/422
9
Ordering Information
Available Models
Package Checklist
NPort 5210: 2-port RS-232 device server, 0 to 55°C operating temperature
• NPort 5200 device server
NPort 5230: 2-port device server with 1 RS-232 port and 1 RS-422/485 port, 0 to 55°C operating
• Power adaptor (excluding T models)
temperature
• Power jack to a 3-pin terminal block adaptor
NPort 5232: 2-port RS-422/485 device server, 0 to 55°C operating temperature
• Documentation and software CD
NPort 5232I: 2-port RS-422/485 device server with 2 KV optical isolation, 0 to 55°C operating
• Quick installation guide (printed)
temperature
• Warranty card
NPort 5210-T: 2-port RS-232 device server, -40 to 75°C operating temperature
NPort 5230-T: 2-port device server with 1 RS-232 port and 1 RS-422/485 port, -40 to 75°C
operating temperature
NPort 5232-T: 2-port RS-422/485 device server, -40 to 75°C operating temperature
NPort 5232I-T: 2-port RS-422/485 device server with 2 KV optical isolation, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
DK-35A: Mounting Kit for 35-mm DIN-Rail
DIN-Rail Power Supply: See page A-8 for details
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® 5400 Series
4-port RS-232/422/485 serial device servers
››10/100M auto-sensing Ethernet
››4 serial ports supporting RS-232/422/485
››Built-in 15 KV ESD surge protection for all serial signals
››Socket modes: TCP server/TCP client/UDP/Real COM
››Configure via Telnet/Web/Windows utility
››SNMP MIB-II for network management
››2 KV isolation protection for NPort 5430I/5450I/5450I-T
››-40 to 75°C operating temperature range (T model)
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Network Readiness for up to Four Serial Devices
NPort® 5400 device servers can conveniently and transparently
connect up to four serial devices to an Ethernet network, allowing you
to network your existing serial devices with only basic configuration.
Data transmission between the serial and Ethernet interfaces is
bi-directional. By using NPort® device servers, you not only protect
your current hardware investment, but also allow for future network
expansion. You can both centralize the management of your serial
devices, and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort® 5400 device servers can be used to connect different devices
for remote data polling or event handling over a TCP/IP network. Each
serial port on the NPort® 5400 operates independently to provide
maximum versatility. For example, port 1 can operate in Driver mode,
port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
User-friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort® 5400’s top panel, with four
buttons for inputting data, configuration, and selecting the operation
mode. The LCD panel displays the server name, serial number, and
IP address, and can be used to enter or modify parameters such as
IP address, netmask, and gateway. (The LCD panel is not available on
wide temperature models.)
Dual DC Power Inputs
NPort® 5400 device servers support dual power sources by providing
both a DC terminal block input and a DC power jack input. Providing
two types of power input gives users greater flexibility for use with
different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 series provides adjustable termination and pull high/
low resistors for RS-485 applications. In some critical environments,
termination resistors may be needed to prevent the reflection of serial
signals, and the pull high/low resistors may need adjusting to maintain
the integrity of the electrical signal. Since no set of resistor values is
universally compatible with all environments, the NPort® 5400 has
four sets of DIP switches on the bottom panel to set the termination
and pull high/low resistor values.
9-14
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Appearance
NPort® 5410/5450/5450I
Power input
Power jack
(12 to 48 VDC)
Power input
Terminal block
(12 to 48 VDC)
NPort® 5430/5430I
NPort® 5450-T/5450I-T
Ethernet
RJ45 10/100 Mbps
Reset button
LEDs
LAN and
serial status
LCD panel
9
DK-35A DIN-Rail Kit
DB9 male
DIN-Rail or panel mounting
Optional DIN-Rail (35 mm)
mounting kit
Terminal
block
Push buttons
DB9 male
Specifications
Ethernet Interface
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 4
Serial Standards:
NPort 5410: RS-232
NPort 5430/5430I: RS-422/485 (software selectable)
NPort 5450/5450I/5450-T/5450I-T: RS-232/422/485 (software
selectable)
Connector:
NPort 5410/5450/5450I/5450-T/5450I-T: DB9 male
NPort 5430/5430I: Terminal block
Serial Line Protection:
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5430I/5450I/5450I-T)
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Terminator for RS-485: 120 Ω
Serial Communication Parameters
LCD Panel: Liquid Crystal Display on the case
Push Buttons: Four push buttons for convenient on-site configuration
Physical Characteristics
Housing: Metal
Weight: 740 g
Dimensions:
Without mounting kit: 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in)
With mounting kit: 181 x 103 x 33 mm (7.14 x 4.06 x 1.30 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort 5410: 350 mA @ 12 V, 190 mA @ 24 V
NPort 5430: 320 mA @ 12 V, 175 mA @ 24 V
NPort 5430I: 530 mA @ 12 V, 280 mA @ 24 V
NPort 5450/5450-T: 350 mA @ 12 V, 190 mA @ 24 V
NPort 5450I/5450I-T: 554 mA @ 12 V, 294 mA @ 24 V
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Mini Screen with Push Buttons (standard temp. models
only)
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Available Accessory
Standards and Certifications
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
Configuration Options: Web Console, Telnet Console, Windows Utility
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Marine: DNV (standard temp. models only)
Medical: EN 60601-1-2 Class B, EN 55011 (NPort 5410/5450/5450I
only)
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Reliability
NPort 5430I: 114,540 hrs
NPort 5450/5450I: 206,903 hrs
NPort 5450-T/5450I-T: 206,903 hrs
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
NPort 5410: 205,153 hrs
NPort 5430: 201,699 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
RESET
Ø3.2 (0.13)
LAN
V+ V-
33 (1.3)
4 Port Device Server
P4
169 (6.67)
169 (6.67)
6 7 8 9
NPort® 5450/5450I/5450-T/5450I-T
(RS-232/422/485, DB9 male connector)
1 2 3 4 5
6 7 8 9
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
–
GND
1
2
3
4
5
6
7
8
9
NPort® 5430/5430I
(RS-422/485, terminal block connector)
T-
RS-232
NPort 5430/5430I
Terminal Block
Serial Device
Signals
PIN
RS-232
RS-422/RS-485-4w
RS-485-2w
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
GND
1 2 3 4 5
PIN
Rx-
NPort® 5410
(RS-232, DB9 male connector)
T+
Pin Assignment
R- / D-
181 (7.14)
Rx+
Serial-to-Ethernet Device Servers > NPort® S8455 Series
158 (6.22)
158 (6.22)
Tx- / Data-
P3
R+ / D+
P2
Tx+ / Data+
P1
35.5 (1.4 )
25
(0.98)
39 (1.54)
9
103 (4.06)
5410
Ordering Information
Package Checklist
Available Models
NPort 5410: 4-port RS-232 device server
• NPort 5400 device server
NPort 5430: 4-port RS-422/485 device server
• Power adaptor (excluding T models)
NPort 5430I: 4-port RS-422/485 device server with 2 KV isolation protection
• Documentation and software CD
NPort 5450: 4-port RS-232/422/485 device server
• Quick installation guide (printed)
NPort 5450I: 4-port RS-232/422/485 device server with 2 KV isolation protection
• Warranty card
NPort 5450-T: 4-port RS-232/422/485 device server, -40 to 75°C operating temperature (without LCM)
NPort 5450I-T: 4-port RS-232/422/485 device server with 2KV isolation protection, -40 to 75°C operating temperature (without LCM)
Optional Accessories (can be purchased separately)
DK-35A: Mounting Kit for 35-mm DIN-Rail
DIN-Rail Power Supply: See page A-8 for details
Terminal Block: See page A-7 for details
Power Adaptor: See page A-9 for details
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
9-14
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
NPort® 5600 Series
8 and 16-port RS-232/422/485 rackmount serial device servers
››8 or 16 serial ports supporting RS-232/422/485
››Standard 19-inch rackmount size
››10/100M auto-sensing Ethernet
››Built-in 15 KV ESD protection for all serial signals
››Easy IP address configuration with LCD panel (excluding wide
temperature models)
››Configure via Telnet/Web/Windows utility
››Socket modes: TCP server/TCP client/UDP/Real COM
››SNMP MIB-II for network management
With the NPort® 5600 rackmount series, you not only protect your
current hardware investment, but also allow for future network
expansion by centralizing the management of your serial devices and
distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect
up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports
on the front panel, and 8 or 16 RJ45 serial port connectors on the
rear panel. This makes the NPort® 5600 device servers suitable for
standard 19-inch rack mounting, allowing you to simplify operational,
maintenance, and administrative tasks.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located
on the RJ45 connector) provide a great tool for basic maintenance
tasks and help engineers analyze problems in the field. The LEDs not
only indicate current system and network status, but also help field
engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection,
it is important to set the pull high/low resistors correctly so that the
electrical signal is not corrupted. Since no set of resistor values is
universally compatible for all environments, the NPort® 5650-8/16 has
DIP switches on the bottom panel for setting the termination and pull
high/low resistor values.
Real COM/TTY Ports
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
9
Real COM/TTY drivers are provided to make the serial ports on the
NPort® 5600 recognizable as Real COM ports by Windows, or Real
TTY ports by Linux. In addition to supporting basic data transmission
and reception, the NPort® drivers also support the RTS, CTS, DTR,
DSR, and DCD control signals.
Appearance
AC power input
100 to 240 VAC input, 47 to 63 HZ
AC power switch
Ethernet
RJ45 10/100 Mbps
Serial ports (50 bps to 921.6 Kbps, RJ45 connectors)
NPort® 5610: RS-232
NPort® 5630: RS-422/485
NPort® 5650: RS-232/422/485
Connection cable
RJ45 to DB9 cable
(optional accessory)
Mounting plate
LCD
panel
Reset
button
Push
buttons
LED indicators
system status, serial Tx/Rx
Note: LCD panel and configuration buttons not available with wide-temp. models
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
Specifications
Ethernet Interface
Housing: Metal
Weight:
NPort 5610-8: 3340 g
NPort 5610-8-48V: 3160 g
NPort 5630-8, 5650-8-S-SC, 5650-8-M-SC: 3380 g
NPort 5650-8: 3360 g
NPort 5610-16: 3420 g
NPort 5610-16-48V: 3260 g
NPort 5630-16: 3400 g
NPort 5650-16: 3460 g
NPort 5650-16-S-SC, 5650-16-M-SC: 3440 g
Dimensions:
Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
100BaseFX
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-14 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
Environmental Limits
Operating Temperature: Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Serial Interface
Number of Ports: 8 or 16
Serial Standards:
NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector: RJ45 (8 pins)
Serial Line Protection:
15 KV ESD protection for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ (NPort 5650-8/16)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options: Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Input Voltage:
NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption:
NPort 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC
NPort 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 110 mA @ 240 VAC
NPort 5650-8/16-M-SC: 174 mA @ 100 VAC, 113 mA @ 240 VAC
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Medical: EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
NPort 5610-8: 97,294 hrs
NPort 5610-16: 94,928 hrs
NPort 5610-8-48V: 96,758
NPort 5610-16-48V: 94,417 hrs
NPort 5630-8: 118,405 hrs
NPort 5630-16: 91,483 hrs
NPort 5650-8: 117,584 hrs
NPort 5650-16: 104,767 hrs
NPort 5650-8-S-SC: 116,914 hrs
NPort 5650-16-S-SC: 87,528 hrs
NPort 5650-8-M-SC: 116,914 hrs
NPort 5650-16-M-SC: 87,528 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Mini Screen with Push Buttons (for standard temp.
models)
LCD Panel: Liquid Crystal Display on the case
Push Buttons: Four push buttons for convenient on-site configuration
Physical Characteristics
9-14
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Dimensions
Unit: mm (inch)
Standard Model
5610-16
198 (7.8)
Wide Temp. Model
5610-16
LA N
440 (17.3)
480 (19)
Pin Assignment
(8-pin RJ45 connector)
1
8
NPort® 5610: RS-232
NPort® 5630: RS-422/485
NPort® 5650: RS-232/422/485
PIN
RS-232
PIN
RS-422/485-4w
RS-485-2w
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
DSR
1
–
–
1
DSR
–
–
2
RTS
2
–
–
2
RTS
TxD+
–
3
GND
3
TxD+
–
3
GND
GND
GND
4
TXD
4
TxD-
–
4
TXD
TxD-
–
5
RxD
5
RxD-
Data-
5
RxD
RxD+
Data+
6
DCD
6
RxD+
Data+
6
DCD
RxD-
Data-
7
CTS
7
GND
GND
7
CTS
–
–
8
DTR
8
–
–
8
DTR
–
–
Ordering Information
Available Models
Serial-to-Ethernet Device Servers > NPort® S8455 Series
45 (1.77)
9
NPort 5610-8: 8-port RS-232 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5610-8-48V: 8-port RS-232 rackmount device server with RJ45 connectors and ±48 VDC power input
NPort 5630-8: 8-port RS-422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-8: 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-8-M-SC: 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100BaseF(X) multi-mode fiber (SC connector)
NPort 5650-8-S-SC: 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100BaseF(X) single-mode fiber (SC connector)
NPort 5650-8-T: 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input, -40 to 75°C operating
temperatures
NPort 5610-16: 16-port RS-232 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5610-16-48V: 16-port RS-232 rackmount device server with RJ45 connectors and ±48 VDC power input
NPort 5630-16: 16-port RS-422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-16: 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-16-M-SC: 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100BaseF(X) multi-mode fiber (SC connector)
NPort 5650-16-S-SC: 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100BaseF(X) single-mode fiber (SC connector)
NPort 5650-16-T: 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input, -40 to 75°C operating
temperatures
Optional Accessories (can be purchased separately)
CBL-RJ45F25-150: 8-pin RJ45 to DB25 female cable, 150 cm
CBL-RJ45M25-150: 8-pin RJ45 to DB25 male cable, 150 cm
CBL-RJ45F9-150: 8- pin RJ45 to DB9 female cable, 150 cm
CBL-RJ45M9-150: 8-pin RJ45 to DB9 male cable, 150 cm
info@moxa.com
Package Checklist
•
•
•
•
•
NPort 5600 series device server
Power cord
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® 5600-8-DT Lite
8-port RS-232/422/485 serial device servers
››8 Serial ports supporting RS-232/422/485
››Compact desktop design
››10/100M auto-sensing Ethernet
››Built-in 15 KV ESD protection for all serial signals
››Configure via Telnet/Web/Windows utility
››Socket modes: TCP server/TCP client/UDP/Real COM
››SNMP MIB-II for network management
9
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Overview
NPort® 5600-8-DTL device servers can conveniently and transparently
connect 8 serial devices to an Ethernet network, allowing you to
network your existing serial devices with basic configurations. You
can both centralize management of your serial devices and distribute
management hosts over the network.The NPort® 5600-8-DTL device
servers have a smaller form factor than our 19-inch models, making
them a great choice for applications needing additional serial ports
when mounting rails are not available.
Convenient Design for RS-485 Applications
The NPort® 5650-8-DTL device servers support selectable 1 KΩ
and 150 KΩ pull high/low resistors and a 120 Ω terminator. In some
critical environments, termination resistors may be needed to prevent
the reflection of serial signals. When using termination resistors, it
is also important to set the pull high/low resistors correctly so that
the electrical signal is not corrupted. Since no set of resistor values
is universally compatible with all environments, NPort® 5600-8-DTL
device servers use DIP switches to allow users to adjust termination
and pull high/low resistor values manually for each serial port.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the
RJ45 connector) provide a great tool for basic maintenance tasks and
help engineers analyze problems in the field. The NPort® 5600’s LEDs
not only indicate current system and network status, but also help field
engineers monitor the status of attached serial devices.
Appearance
Reset button
LED indicators
Ethernet
RJ45 10/100 Mbps
Power input
Power Jack (12 to 48 VDC)
Serial ports
NPort® 5610-8-DTL: DB9, RS-232
NPort® 5650-8-DTL: DB9, RS-232/422/485
Specifications
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 8
Serial Standards:
NPort 5610-8-DTL: RS-232
NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485
Connector: DB9 male
Serial Line Protection:
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5650I-8-DTL only)
9-14
w w w. m o x a . c o m
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Terminator for RS-485: 120 Ω
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
info@moxa.com
Device Connectivity
Software
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,
SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
Configuration Options: Web Console, Telnet Console, Serial Console,
Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Physical Characteristics
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort 5610-8-DTL:
340 mA @ 12 V, 180 mA @ 24 V, 110 mA @ 48 V
NPort 5650-8-DTL:
470 mA @ 12 V, 250 mA @ 24 V, 140 mA @ 48 V
NPort 5650I-8-DTL:
740 mA @ 12 V, 370 mA @ 24 V, 220 mA @ 48 V
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
44
50
125
25
5650-B-DTL
197
217
229
Pin Assignment
DB9 male connector
1 2 3 4 5
6 7 8 9
NPort® 5610-8-DTL (RS-232)
9
NPort® 5650-8-DTL/5650I-8-DTL (RS-232/422/485)
PIN
RS-232
PIN
RS-232
RS-422/485-4w
RS-485-2w
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
1
2
3
4
5
6
7
8
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
TxD-(A)
TxD+(B)
RxD+(B)
RxD-(A)
GND
–
–
–
–
–
Data+(B)
Data-(A)
GND
–
–
–
Serial-to-Ethernet Device Servers > NPort® S8455 Series
Housing: Metal
Weight:
NPort 5610-8-DTL: 1760 g
NPort 5650-8-DTL: 1770 g
NPort 5650I-8-DTL: 1850 g
Dimensions:
Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)
With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x
4.92 in)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ordering Information
Available Models
Package Checklist
NPort 5610-8-DTL: 8-port RS-232 desktop device server with DB9 male connectors, 0 to 60°C operating
• NPort 5600-8-DTL device server
temperature
• Power cord and adaptor (standard
NPort 5650-8-DTL: 8-port RS-232/422/485 desktop device server with DB9 male connectors, 0 to 60°C
temp. models only)
operating temperature
• 2 metal plates (wall mount kit)
NPort 5650I-8-DTL: 8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV
• Documentation and software CD
isolation, 0 to 60°C operating temperature
• Quick installation guide (printed)
NPort 5610-8-DTL-T: 8-port RS-232 desktop device server with DB9 male connectors, -40 to 75°C
• Warranty card
operating temperature
NPort 5650-8-DTL-T: 8-port RS-232/422/485 desktop device server with DB9 male connectors, -40 to 75°C
operating temperature
NPort 5650I-8-DTL-T: 8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV isolation, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
info@moxa.com
w w w. m o x a . c o m
9-13
Serial-to-Ethernet Device Servers
NPort® IA5000A Series
1, 2, and 4-port serial device servers for industrial automation
››Enhanced surge protection for LAN/serial/power
››2 KV isolation for serial signals
››Screw-type terminal blocks for secure power/serial connections
››C1D2 and ATEX certified for harsh industrial environments
››Cascading Ethernet ports for easy wiring
››Redundant DC power inputs
››Warning by relay output and email
››Low power consumption with built-in MiiNe CPU
››-40 to 75°C operating temperature range (T models)
9
Serial-to-Ethernet Device Servers > NPort® IA5000A Series
Overview
The NPort IA5000A series device servers are designed for connecting
industrial automation serial devices, such as PLCs, sensors, meters,
motors, drives, barcode readers, and operator displays. The device
servers are built solid with a metal housing, screw connectors, and
provide full surge protection. The NPort IA5000A series device servers
are extremely user-friendly, making simple and reliable serial-toEthernet solutions possible.
Cascading Ethernet Ports Make Wiring Easy (10/100BaseTX models only)
The NPort IA5000A series device servers each have two Ethernet
ports that can be used as Ethernet switch ports. One port connects
directly to the network or server, and the other port can be connected
to another NPort IA device server or another Ethernet device. The dual
Ethernet ports help reduce wiring costs by eliminating the need to
connect each device to a separate Ethernet switch.
Redundant Power Inputs
The NPort IA5000A series device servers have two power inputs
that can be connected simultaneously to live DC power sources. If
one power source fails, the other source takes over automatically.
Redundant power inputs help ensure uninterrupted operation of your
device server.
9-42
w w w. m o x a . c o m
Dual Power Inputs
info@moxa.com
Device Connectivity
Relay Output Warning and E-mail Alerts
The built-in relay output can be used to alert administrators when the
network is down, when power failure occurs or when there is a change
in the DCD or DSR serial signals. An e-mail warning can also be issued
when an abnormality is detected. These functions are valuable tools
that enable maintenance engineers to react promptly to emergency
situations.
Power Failure Alarm
9
Surge Protection for Serial, LAN, and Power
provides a robust serial-to-Ethernet solution that can protect electrical
devices from voltage spikes and resist electrical interference, such as
in oil, gas, and power automation applications.
Industrial-grade Certification
To ensure safe and reliable operation in industrial environments, the
NPort® IA5000A device servers have obtained various industrial
certifications, including an IP30 rating for mechanical protection and
UL508 safety certification for industrial control equipment. In addition,
these device servers are UL/cUL listed (for Class1, Division 2, Groups
A,B,C,D) and ATEX Class1 Zone 2 compliant for use in hazardous
locations.
Specifications
Ethernet Interface
Serial Signals
Number of Ports: 2
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Ethernet Line Protection: 1 KV (level 2) surge protection
Serial Interface
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Number of Ports:
NPort IA5150A: 1
NPort IA5250A: 2
NPort IA5450A: 4
Serial Standards: RS-232/422/485
Connector:
NPort IA5150A: DB9 for RS-232, terminal block for RS-422/485
NPort IA5250A/IA5450A: DB9 for RS-232/422/485
Serial Line Protection:
• 15 KV ESD protection for all signals
• 2 KV isolation protection for isolation models
• 1 KV (level 2) surge protection
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 50 to 921.6 Kbps
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet,
Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, IGMP
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Serial-to-Ethernet Device Servers > NPort® IA5000A Series
Moxa’s leading-edge surge immunity solution, which is applied to
the NPort® IA5000A’s serial, power, and Ethernet lines, is tested and
proven compliant with IEC 61000-4-5. This advanced surge protection
Physical Characteristics
Housing: Metal
Weight:
NPort IA5150A: 475 g
NPort IA5250A: 485 g
NPort IA5450A: 560 g
Dimensions:
NPort IA5150A/IA5250A: 36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in)
NPort IA5450A: 45.8 x 134 x 105 mm (1.8 x 5.28 x 4.13 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
info@moxa.com
w w w. m o x a . c o m
9-43
Serial-to-Ethernet Device Servers
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort IA5150A: 12 to 48 VDC; 220 mA @ 12 VDC, 110 mA @ 24 VDC
NPort IA5150AI: 12 to 48 VDC; 255 mA @ 12 VDC, 130 mA @ 24 VDC
NPort IA5250A: 12 to 48 VDC; 250 mA @ 12 VDC, 125 mA @ 24 VDC
NPort IA5250AI: 12 to 48 VDC; 290 mA @ 12 VDC, 150 mA @ 24 VDC
NPort IA5450A: 12 to 48 VDC; 374 mA @ 12 VDC, 184 mA @ 24 VDC
NPort IA5450AI: 12 to 48 VDC; 512 mA @ 12 VDC, 242 mA @ 24 VDC
Standards and Certifications
9
Serial-to-Ethernet Device Servers > NPort® IA5000A Series
Safety: UL 508
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Class I Zone 2
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
262,805 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Pin Assignment
PIN
RS-232
RS-422/RS-485-4w
RS-485-2W
RS-232/422/485
DB9 male port
1
DCD
TxD-(A)
–
2
RXD
TxD+(B)
–
1 2 3 4 5
3
TXD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
6 7 8 9
RS-422/485 Terminal
Block Wiring
12345
PIN
RS-422/RS-485-4w
RS-485-2w
1
TxD+(B)
–
2
TxD-(A)
–
3
RxD+(B)
Data+(B)
4
RxD-(A)
Data-(A)
5
GND
GND
Dimensions
Unit: mm (inch)
NPort IA5150A
NPort IA5150AI
NPort IA5250A
NPort IA5250AI
13 (0.51)
8.8 (0.35)
24 (0.94)
6 (0.24)
36 (1.42)
9-42
w w w. m o x a . c o m
info@moxa.com
200 (7.87)
174 (6.85)
140 (5.51)
149 (5.87)
105 (4.14)
Device Connectivity
Dimensions
Unit: mm (inch)
45.8 (1.80)
NPort IA5450A
NPort IA5450AI
188 (7.41 )
162 (6.38)
134 (5.28 )
143 (5.64)
105 (4.13)
113 (4.48)
34 (1.34)
51.6 (2.03)
Ordering Information
Available Models
NPort IA5150A: 1-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 0 to 60°C operating temperature
NPort IA5150AI: 1-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation, 0 to 60°C operating temperature
NPort IA5250A: 2-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 0 to 60°C operating temperature
NPort IA5250AI: 2-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation, 0 to 60°C operating temperature
NPort IA5450A: 4-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 0 to 60°C operating temperature
NPort IA5450AI: 4-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation protection, 0 to 60°C operating temperature
NPort IA5150A-T: 1-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, -40 to 75°C operating temperature
NPort IA5150AI-T: 1-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation, -40 to 75°C operating temperature
NPort IA5250A-T: 2-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, -40 to 75°C operating temperature
NPort IA5250AI-T: 2-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation, -40 to 75°C operating temperature
NPort IA5450A-T: 4-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, -40 to 75°C operating temperature
NPort IA5450AI-T: 4-port RS-232/422/485 industrial automation device server with serial/LAN/power surge protection, two 10/100BaseT(X) ports with
single IP, 2 KV isolation protection, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
8-contact screw-type terminal block: Power inputs and relay output
5-contact screw-type terminal block: For the NPort IA5150A’s RS-422/485 port
WK-36-02: Wall mounting kit for the NPort IA5150A/IA5250A
WK-51-01: Wall mounting kit for the NPort IA5450A
info@moxa.com
Serial-to-Ethernet Device Servers > NPort® IA5000A Series
13
(0.51)
4.3 (0.17)
9
Package Checklist
•
•
•
•
NPort IA5000A series device server
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-45
Serial-to-Ethernet Device Servers
NPort® IA5000 Series
1 and 2-port serial device servers for industrial automation
››Socket modes: TCP server/TCP client/UDP
››Patented ADDC® (automatic data direction control) for 2-wire
and 4-wire RS-485
››Cascading Ethernet ports for easy wiring (applies only to RJ45
connectors)
››Redundant DC power inputs
››Warning by relay output and e-mail
››10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode
with SC connector)
››IP30-rated housing
9
Serial-to-Ethernet Device Servers > NPort® IA5000 Series
See also NPort IA5000A, p. 9-42
Overview
NPort® IA device servers provide easy and reliable serial-to-Ethernet
connectivity for industrial automation applications. The device servers
can connect any serial device to an Ethernet network, and to ensure
compatibility with network software, they support a variety of port
operation modes, including TCP Server, TCP Client, and UDP. The
rock-solid reliability of the NPort® IA device servers makes them
an ideal choice for establishing network access to RS-232/422/485
serial devices such as PLCs, sensors, meters, motors, drives, barcode
readers, and operator displays. All models are housed in a compact,
rugged housing that is DIN-rail mountable.
Cascading Ethernet Ports Make Wiring Easy (10/100BaseTX models only)
The NPort® IA5150 and IA5250 device servers each have two Ethernet
ports that can be used as Ethernet switch ports. One port connects
directly to the network or server, and the other port can be connected
9-42
w w w. m o x a . c o m
to another NPort® IA device server or another Ethernet device. The
dual Ethernet ports help reduce wiring costs by eliminating the need to
connect each device to a separate Ethernet switch.
info@moxa.com
Device Connectivity
Redundant Power Inputs
The NPort® IA5000 device servers have two power inputs that can
be connected simultaneously to live DC power sources. If one power
source fails, the other source takes over automatically. Redundant
power inputs help assure that your device server will operate non-stop.
Dual Power Inputs
Relay Output Warning and E-mail Alerts
The built-in relay output can be used to alert administrators of
problems with the Ethernet links or power inputs, or when there is a
change in the DCD or DSR serial signals. The web console indicates
Power Failure Alarm
which Ethernet link or power input has failed, or which serial signal
has changed. An e-mail warning can also be issued when an exception
is detected. These functions are valuable tools that enable maintenance
engineers to react promptly to emergency situations.
The NPort® IA5000 series includes 100BaseFX fiber models that
support transmission distances up to 5 km for multi-mode models,
and up to 40 km for single-mode models. Optical fiber is well-suited
for industrial applications because it is immune to electromagnetic
noise and interference. For environments that experience high ground
loop voltages, fiber provides the best isolation protection, and because
there is no danger of sparking, optical fiber is safer than copper wire to
use in hazardous environments.
Industrial-grade Certification
To ensure safe and reliable operation in industrial environments,
the NPort® IA5000 device servers have obtained various industrial
certifications, including an IP30 rating for mechanical protection,
UL508 safety certification for industrial control equipment, and
explosion-safe certifications for hazardous locations.
Certifications include UL/cUL Class 1 Division 2 Groups A,
B, C, D, and ATEX Class 1 Zone 2.
Serial-to-Ethernet Device Servers > NPort® IA5000 Series
Optical Fiber for Ethernet Communication
9
Appearance
Dual Power Input and
Relay Output
Reset
Reset
LED
Indicators
RS-232
RS-422/485
NPort IA5150
NPort IA5150I
NPort IA5150-S-SC
NPort IA5150-M-SC
NPort IA5150I-S-SC
NPort IA5150I-M-SC
Copper
Ethernet
Fiber optic
Ethernet
RS-232/422/485
NPort IA5250
info@moxa.com
w w w. m o x a . c o m
9-47
Serial-to-Ethernet Device Servers
Specifications
Environmental Limits
Ethernet Interface (NPort IA5150/5150I/5250)
Number of Ports: 2
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Optical Fiber Interface (-M-SC and -S-SC models)
100BaseFX
9
Serial-to-Ethernet Device Servers > NPort® IA5000 Series
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-14 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
Standards and Certifications
Serial Interface
Number of Ports:
NPort IA5150: 1
NPort IA5250: 2
Serial Standards: RS-232/422/485
Connector:
NPort IA5150: DB9 male for RS-232, terminal block for RS-422/485
NPort IA5250: DB9 male for RS-232/422/485
Serial Line Protection:
15 KV ESD protection for all signals
2 KV isolation protection (NPort IA5150I, NPort 5150I-M-SC, NPort
5150I-S-SC)
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate: 110 bps to 230.4 Kbps
Serial Signals
9-42
w w w. m o x a . c o m
Reliability
Water and Dust Proof: IP30
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
NPort IA5150 Series: 183,747 hrs
NPort IA5150I Series: 195,614 hrs
NPort IA5250 Series: 194,765 hrs
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Pin Assignment
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet,
Rtelnet, DNS, SNMP V1, HTTP, SMTP, SNTP
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.0.x
Housing: Plastic, IP30 protection
Weight:
NPort IA5150: 360 g
NPort IA5250: 380 g
Dimensions: 29 x 89.2 x 118.5 mm (0.82 x 3.51 x 4.57 in)
Safety: UL 508, UL 60950-1, EN 60950-1
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Zone 2
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11
Marine: DNV
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Physical Characteristics
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort IA5150: 360 mA @ 12 V, 195 mA @ 24 V
NPort IA5150I: 420 mA @ 12 V, 215 mA @ 24 V
NPort IA5250: 440 mA @ 12 V, 200 mA @ 24 V
NPort IA5150-S-SC: 470 mA @ 12 V, 210 mA @ 24 V
NPort IA5150I-S-SC: 490 mA @ 12 V, 250 mA @ 24 V
NPort IA5150-M-SC: 500 mA @ 12 V, 250 mA @ 24 V
NPort IA5150I-M-SC: 510 mA @ 12 V, 260 mA @ 24 V
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Software
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
RS-232/422/485
DB9 male port
PIN
RS-232
RS-422/RS-485-4w
RS-485-2W
1
DCD
TxD-(A)
–
1 2 3 4 5
2
RXD
TxD+(B)
–
3
TXD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
6 7 8 9
RS-422/485 Terminal
Block Wiring
5
info@moxa.com
4
3
2
1
PIN
RS-422/RS-485-4w
RS-485-2w
1
TxD+(B)
–
2
TxD-(A)
–
3
RxD+(B)
Data+(B)
4
RxD-(A)
Data-(A)
5
GND
GND
Device Connectivity
Dimensions
Unit: mm (inch)
NPort IA5150
NPort IA5150I
NPort IA5250
NPort IA5150-M-SC
NPort IA5150-S-SC
NPort IA5150I-M-SC
NPort IA5150I-S-SC
29 (1.14)
29.91
(1.18)
11.5
(0.45)
29 (1.14)
14.5
(0.57)
124.5 (4.9)
118.5 (4.67)
20
(0.79)
NPort IA5150
NPort IA5150I
NPort IA5150-M-SC
NPort IA5150-S-SC
NPort IA5150I-S-SC
NPort IA5150I-M-SC
NPort IA5250
25.9 (1.02)
35 (1.38)
Ordering Information
Available Models
NPort IA5150: 1-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP), 0 to 55°C operating temperature
NPort IA5150I: 1-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP) and 2 KV optical isolation, 0 to 55°C
operating temperature
NPort IA5150-M-SC: 1-port RS-232/422/485 device server with 1 100BaseF(X) multi-mode fiber port (SC connectors), 0 to 55°C operating
temperature
NPort IA5150I-M-SC: 1-port RS-232/422/485 device server with 1 100BaseF(X) multi-mode fiber port (SC connectors) and 2 KV optical isolation, 0 to
55°C operating temperature
NPort IA5150-S-SC: 1-port RS-232/422/485 device server with 1 100BaseF(X) single-mode fiber port (SC connectors), 0 to 55°C operating
temperature
NPort IA5150I-S-SC: 1-port RS-232/422/485 device server with 1 100BaseF(X) single-mode fiber port (SC connectors) and 2 KV optical isolation, 0 to
55°C operating temperature
NPort IA5250: 2-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP), 0 to 55°C operating temperature
NPort IA5150-T: 1-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP), -40 to 75°C operating temperature
NPort IA5150I-T: 1-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP) and 2 KV optical isolation, -40 to
75°C operating temperature
NPort IA5150-M-SC-T: 1-port RS-232/422/485 device server with 1 100BaseF(X) multi-mode fiber port (SC connectors), -40 to 75°C operating
temperature
NPort IA5150I-M-SC-T: 1-port RS-232/422/485 device server with 1 100BaseF(X) multi-mode fiber port (SC connectors) and 2 KV optical isolation,
-40 to 75°C operating temperature
NPort IA5150-S-SC-T: 1-port RS-232/422/485 device server with 1 100BaseF(X) single-mode fiber port (SC connectors), -40 to 75°C operating
temperature
NPort IA5150I-S-SC-T: 1-port RS-232/422/485 device server with 1 100BaseF(X) single-mode fiber port (SC connectors) and 2 KV optical isolation,
-40 to 75°C operating temperature
NPort IA5250-T: 2-port RS-232/422/485 device server with 2 10/100BaseT(X) ports (RJ45 connectors, single IP), -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
Din-Rail Power Supply: See page A-8
SC male to ST female duplex adaptors: See page A-11
Package Checklist
•
•
•
•
info@moxa.com
9
Serial-to-Ethernet Device Servers > NPort® IA5000 Series
35 (1.38)
14.5
(0.57)
89.2 (3.51)
66.6 (2.62)
79.5 (3.13)
92.4 (3.64)
69.5 (2.74)
14.5
(0.57)
25.9 (1.02)
20.6
(0.81)
NPort IA5000 series device server
Documentation and software CD
Quick installation guide (printed)
Warranty card
w w w. m o x a . c o m
9-49
Serial-to-Ethernet Device Servers
NPort® W2150A/W2250A
1 and 2-port RS-232/422/485 IEEE 802.11a/b/g wireless device servers
NPort® W2150A
NPort® W2250A
9
››Link any serial device to an IEEE 802.11a/b/g network
››921.6 Kbps baudrate for RS-232/422/485 transmissions
››Web-based configuration using built-in Ethernet or WLAN
››Enhanced surge protection for serial, LAN, and power
››Remote configuration with HTTPS, SSH
››Secure data access with WEP, WPA, WPA2
››Built-in WLAN site survey tool
››Fast automatic wireless fast roaming
››Off-line port buffering and serial data log
››Dual power inputs (1 screw-type power jack, 1 terminal block)
Serial-to-Ethernet Device Servers > NPort® W2150A/W2250A
Overview
The NPort® W2150A and W2250A are the ideal choice for connecting
your serial devices, such as PLCs, meters, and sensors, to a wireless
LAN. Your communications software will be able to access the serial
devices from anywhere over a wireless LAN. Moreover, the wireless
device servers require fewer cables and are ideal for applications that
involve difficult wiring situations. In Infrastructure Mode or Ad-Hoc
Mode, the NPort® W2150A and NPort® W2250A can connect to Wi-Fi
networks at offices and factories to allow users to move, or “roam,”
between several APs (Access Points), and offer an excellent solution
for devices that are frequently moved from place to place.
802.11a/b/g Wireless Connectivity to Serial Devices
Wireless device servers require fewer cables and are ideal for
applications that involve difficult wiring situations. In Infrastructure
Mode or Ad-Hoc Mode, the NPort® W2150A and NPort® W2250A
can communicate with any host computer through an access point, or
with another NPort® W2150A or NPort® W2250A located up to 100
meters away.
Wireless Fast Roaming Function
Wi-Fi networks at offices and factories allow users to move, or “roam,”
between several APs (Access Points). Moxa’s Fast Roaming function
increases the roaming speed to unify AP channels and avoid wasting
channel hopping time while roaming.
Off-line Port Buffering and Serial Data Log for Each Port
For mission-critical applications, data from the serial device must not
be lost if the wireless connection goes down. The NPort® W2150A
and NPort® W2250A are designed to continue operating if the wireless
connection is disconnected temporarily. If the wireless connection
is retraining, or if the connection fails, the serial data from the serial
device will be queued in the 10 MB port buffer built into the device
server. As soon as the wireless connection returns to normal, the data
stored in the buffer will be sent to its destination. In addition, a serial
data log can be enabled to make troubleshooting easier.
The serial data log buffer for both the NPort® W2150A and NPort®
W2250A is 64 KB per port.
Built-in WLAN Site Survey Tool
The NPort® W2150A and NPort® W2250A both have a built-in WLAN site survey tool.
Additional software is NOT required to complete the site survey.
The purpose of conducting a WLAN site survey is to determine how many access points
are required, and where the access points should be placed. For most implementations, the
number and placement of access points is designed to guarantee a minimum data rate. With
wireless systems, it is often necessary to perform a WLAN site survey before installing the
access points in order to understand how radio waves behave within the facility.
9-50
w w w. m o x a . c o m
info@moxa.com
Device Connectivity
Secure Remote Management and Configuration with SSH/HTTPS
Unauthorized access is one of the biggest headaches for system
managers. In addition to IP filtering and password protection, the
NPort® W2150A and NPort® W2250A also support SSH and HTTPS
to provide protection from hackers. To transmit control messages
securely, open the web console using a web browser that supports
https (Internet Explorer, for example). You may also open the serial or
Telnet console, such as PuTTY, using a terminal emulator that supports
SSH.
Select “Any Baudrate” between 50 bps and 921.6 Kbps
Most device servers only support a fixed number of serial baudrates.
However, some applications require special baudrates, such as 250
Kbps or 500 Kbps. With the NPort® W2150A and NPort® W2250A,
you can enter any baudrate between 50 and 921.6 Kbps.
If your device’s baudrate is not a standard baudrate, select “other”
from the drop-down list and then enter the baudrate.
Specifications
Ethernet Interface
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
WLAN Interface
Software
Standard Compliance: 802.11a/b/g
Network Modes: Infrastructure, Ad-Hoc
Transmit Power:
802.11a: 14 dBm (typical)
802.11b: 17 dBm (typical)
802.11g: 15 dBm (typical)
Receive Sensitivity: -80 dBm
Radio Frequency Type: DSSS/OFDM
Transmission Rate:
802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps (max.) with auto fallback (54, 48, 36, 24, 18, 12,
11, 9, 6, 5.5, 2, 1 Mbps)
Transmission Distance: Up to 100 meters (in open areas)
Wireless Security:
• WEP: 64-bit/128-bit data encryption
• WPA, WPA2, 802.11i: Enterprise mode and
Pre-Share Key (PSK) mode
• Encryption: 128-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAP/
MD5, PEAP/MSCHAPV2, EAP-TTLS/PAP, EAP-TTLS/CHAP, EAP-TTLS/
MSCHAP, EAP-TTLS/MSCHAPV2, EAP-TTLS/EAP-MSCHAPV2,
EAP-TTLS/EAP-GTC, EAP-TTLS/EAP-MD5, LEAP
Antenna Connector: Reverse SMA
Serial Interface
Number of Ports:
NPort W2150A: 1
NPort W2250A: 2
Serial Standards: RS-232/422/485 (DB9 male connector)
Off-line Port Buffering:
Nport W2150A: 20 MB
Nport W2250A: 10 MB
Serial Line Surge Protection: 1KV (level 2)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Data Log: 64 KB
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
Network Protocols: ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP
V1/V2c/V3, HTTP, SMTP, SNTP, SSH, HTTPS
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Utility
Secure Configuration Options: HTTPS, SSH
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/ 7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare
2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX
11i
Linux Real TTY Drivers: 2.4.x, 2.6.x, 3.0.x
Utilities: NPort Search Utility and NPort Windows Driver manager
Management: SNMP MIB-II
Physical Characteristics
Housing: Aluminum sheet metal (1 mm)
Weight: 780 g
Dimensions:
Without ears or antenna: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
With ears, without antenna: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Antenna Length: 109.79 mm (4.32 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-4 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Serial-to-Ethernet Device Servers > NPort® W2150A/W2250A
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45
Magnetic Isolation Protection: 1.5 KV built-in
9
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
237 mA @ 12 V, 125 mA @ 24 V, 50 mA @ 48 V
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, FCC Subpart C/E, VCCI
EMS: EN 55022 Class A
Radio: CE (ETSI EN 301 893, ETSI EN 300 328), ARIB RCR STD-33,
ARIB STD-66
Power Line Surge Protection: 2 KV (level 3)
Reliability
Alert Tool: RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
w w w. m o x a . c o m
9-51
Serial-to-Ethernet Device Servers
Dimensions
Unit: mm (inch)
9
14.5
(0.57)
1 2 3 4 5
PIN
RS-232
RS-422/485-4W
1
DCD
TxD-(A)
–
2
RxD
TxD+(B)
–
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
9
–
–
–
109.79 (4.32)
34 (1.33)
111 (4.37)
W2250A
43 (1.69)
∅7
(0.28)
∅6
(0.24)
25 (0.98)
12.5
(0.49)
43 (1.69)
26 (1.02)
Pin Assignment, DB9 Male
6 7 8 9
∅4
(0.16)
Serial-to-Ethernet Device Servers > NPort® W2150A/W2250A
77 (3.03)
88 (3.46)
100 (3.93)
26 (1.02)
Ordering Information
Available Models
NPort W2150A-US: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, US band, US plug, 0 to 55°C operating
temperature
NPort W2150A-EU: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, Euro plug, 0 to 55°C operating
temperature
NPort W2150A-CN: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, CN plug, CCC, 0 to 55°C operating
temperature
NPort W2150A-UK: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, UK plug, 0 to 55°C operating
temperature
NPort W2150A-SAA: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, Australia plug, 0 to 55°C operating
temperature
NPort W2150A-JP: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Japan band, Japan plug, 0 to 55°C operating
temperature
NPort W2250A-US: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, US band, US plug, 0 to 55°C operating
temperature
NPort W2250A-EU: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, Euro plug, 0 to 55°C operating
temperature
NPort W2250A-CN: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, CN plug, CCC
NPort W2250A-UK: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, UK plug, 0 to 55°C operating
temperature
NPort W2250A-SAA: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Euro band, Australian plug, 0 to 55°C operating
temperature
NPort W2250A-JP: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN, antenna, Japan band, Japan plug, 0 to 55°C operating
temperature
NPort W2150A-T: 1-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN (includes US, Euro, Japan band), -40 to 75°C operating
temperature
NPort W2250A-T: 2-port RS-232/422/485 wireless device server with 802.11a/b/g WLAN (includes US, Euro, Japan band), -40 to 75°C operating
temperature
Optional Accessories (can be purchased separately)
Serial Cables and Adaptors: See page A-6 for details
DK-35A: 35 mm DIN-Rail Mounting Kit
PWR-12150-USJP-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, US/JP Plug
PWR-12150-EU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, EU Plug
PWR-12150-UK-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, UK Plug
PWR-12150-CN-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, CN Plug
PWR-12150-AU-SA-T: 100 to 240 VAC input, 12 VDC/1.5A output, -40 to 75°C, screw type, AU Plug
9-52
RS-485-2W
w w w. m o x a . c o m
info@moxa.com
Package Checklist
• NPort W2150A or NPort W2250A
wireless device server
• Power adaptor (excluding T models)
• Antenna
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Device Connectivity
NPort® Z2150/Z3150 Series
1-port RS-232/422/485 to ZigBee converter or
ZigBee-to-Ethernet gateway
››IEEE 802.15.4/ZigBee compliant
››Network topologies: Mesh/Star/Cluster tree
››128-bit AES hardware encryption
››Enhanced surge protection for serial and power
››Dual DC power inputs (NPort Z3150 only)
››Easy-to-use configuration utility
››Up to 99 nodes per network
NPort® Z3150
Overview
The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee
compliant, providing a reliable wireless solution for serial-to-ZigBee
networks requiring minimal wiring presence.
The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a
ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can
be connected to the NPort Z2150 and exchange data via PAN. An userfriendly utility is provided to configure the device type and network
settings in simple steps.
The following figure shows a typical topology of a ZigBee network.
The NPort Z3150 is the ZigBee coordinator (ZC) connected to
numerous ZigBee routers (ZR) and the routers are connected to end
devices(ZED).
The NPort Z3150 was designed specifically to perform as a ZigBee
Coordinator (ZC), providing nodes with an Ethernet interface to the
ZigBee PAN. Internet connection ad network services are also provided
via the ZigBee PAN. Remote users can monitor any ZigBee device in
the PAN through the NPort Z3150.
Surge-protected Serial and Power Lines
Surge, which is typically caused by high voltages that result from
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested
and proven compliant with IEC 61000-4-5. This surge protection
provides a robust solution that can protect electrical devices from
voltage spikes and withstand electrically noisy environmental
conditions.
Serial-to-Ethernet Device Servers > NPort® Z2150/Z3150 Series
NPort® Z2150
9
Specifications
ZigBee Interface
RF Standard: 802.15.4/ZigBee compliant
Frequency Band: 2.4 GHz
RF Data Rate: 250 Kbps
Rx sensitivity: -96 dBm
Tx Power: 4.5 dBm (Max)
Transmission Distance: Up tp 100m (open space)
Antenna: 2dBi
RF Channel: 16 channels
Device Type: Coordinator, Router (NPort Z2150 only), End Device
(NPort Z2150 only)
Network Topology: Star, Mesh, Cluster tree
Security: 128-bit AES encryption algorithms
Ethernet Interface (NPort Z3150 only)
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 1
Serial Standards: RS-232/422/485
Connector: DB9 male
Serial Line Protection: 1KV surge protection, 15KV ESD protection for
all signals
RS- 485 Data Direction Control: ADDC (Automatic Data Direction
Control)
info@moxa.com
w w w. m o x a . c o m
9-53
Serial-to-Ethernet Device Servers
Serial Communication Parameters
Weight:
NPort Z2150: 340g
NPort Z3150: 780g
Dimensions:
NPort Z2150:
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
NPort Z3150:
Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Data Bits:
NPort Z2150: 8
NPort Z3150: 5, 6, 7, 8
Stop Bits: 1, 2
Parity:
NPort Z2150: None, Even, Odd
NPort Z3150: None, Even, Odd, Mark, Space
Flow Control:
NPort Z2150: RTS/CTS
NPort Z3150: RTS/CTS, XON/XOFF
Baudrate:
NPort 2150: 50 bps to 230.4 Kbps
NPort 3150: 50 bps to 921.6 Kbps
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F)
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption:
NPort Z2150: 45mA@12V
NPort Z3150: 120mA@12V
Connector: Power Jack with Screw, Terminal block (NPort Z3150 only)
Software
Standards and Certifications
Safety: UL (UL60950-1), LVD (EN60950-1)
EMC: CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
Reliability
Hardware
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (meantime between failures): Over 20 years
DIP Switch: Console/Operation Mode
SW1: Pull high/low resister, Termination for RS-422/485.
Reset Button: Reset to default
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Physical Characteristics
Housing: Aluminum
Dimensions
Unit: mm (inch)
8.5 (0.73)
Ø6 (0.24)
43 (1.69)
25 (0.98)
27.5 (1.083)
22 (0.87)
NPort® Z2150
12.5
(0.49)
Serial-to-Ethernet Device Servers > NPort® Z2150/Z3150 Series
Configuration:
NPort Z2150: Utility
NPort Z3150: Web Console
Firmware Upgrade:
NPort Z2150: Utility
NPort Z3150: Utility, Web Console
Ø4 (0.16)
Ø7 (0.28)
52 (2.05)
63 (2.48)
75 (2.95)
9-54
w w w. m o x a . c o m
80 (3.15)
9
Environmental Limits
info@moxa.com
22 (0.87)
Device Connectivity
Dimensions
Unit: mm (inch)
NPort Z3150
9
111 (4.37)
43 (1.69)
34 (1.34)
Ø7 (0.28)
Ø6 (0.24)
12.5
(0.49)
25 (0.89)
43 (1.69)
26 (1.02)
®
Ø4 (0.16)
26 (1.02)
88 (3.46)
100 (3.94)
Pin Assignment
1 2 3 4 5
6 7 8 9
PIN
RS-232
RS-422/RS-485-4w
RS-485-2W
1
DCD
TxD-(A)
–
2
RXD
TxD+(B)
–
3
TXD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
Ordering Information
Available Models
Serial-to-Ethernet Device Servers > NPort® Z2150/Z3150 Series
77 (3.33)
NPort Z2150: 1-port RS-232/422/485 serial to ZigBee converter with 802.15.4, 0 to 55°C operating temperature
NPort Z3150: 1-port ZigBee to Ethernet gateway, 0 to 55°C operating temperature
NPort Z2150-T: 1-port RS-232/422/485 serial to ZigBee converter with 802.15.4, -40 to 75°C operating temperature
NPort Z3150-T: 1-port ZigBee to Ethernet gateway, -40 to 75°C operating temperature
Package Checklist
•
•
•
•
•
•
info@moxa.com
NPort Z2150 or NPort Z3150
2.4 GHz antenna
Documentation and software CD
Power adaptor (wide temperature models excluded)
Warranty card
Quick installation guide (printed)
w w w. m o x a . c o m
9-55
This page intentionally left blank.
Download PDF