Instruction ManualEW-2 12

Instruction ManualEW-2 12
EASY CONNECT®
TING & FANS
LIGH
IR A
G E S & VE N T I L A T
EU
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
!
EW-2
12/12
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
RS
EC
LA
INSTALLATION INSTRUCTIONS
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
INSTALL EASY CONNECT MOUNTING BRACKET:
SAFETY PRECAUTIONS:
1.TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2.THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
NOTE: Product May Not Look Exactly As Shown In Figures.
STEP 1
Electrical
Box
White
(Neutral) Back
Cover
Green
(Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
Wood Screw
Additional support may be required
for fixtures longer than 20” . Position
the fixture and add wood screws
(one on each side) for the wooden
studs or plastic wall anchor and wood
screws for dry wall.
Black
(Live)
Electrical
Box Screws
(not included)
CONNECT HOUSE WIRES
STEP 2 - Option 1
Green
(Ground)
(L)
Black
(Live)
L
Jumper Wire
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
N
N
(N)
White
(Neutral)
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
Green
(Ground)
(N)
White
(Neutral)
L
(L)
Black (Live)
Jumper
Wire
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
CONNECT LIGHT FIXTURE
STEP 3
(L)
Black
(Live)
N
Connect (push) electrical wires from fixture into correct inserts.
Black (live), White (neutral), Green (ground)
L
(N)
White
(Neutral)
Light
Fixture
Green
(Ground)
STEP 4
Stud
Or
Nipple
Fixture
Cap Tuck electrical wires into outlet box and position fixture over studs or nipple on mounting bracket assembly.
Nut Secure fixture in place with star washer(s) and cap nut(s).
Note: If required, assemble body and spread the arms of the fixture out evenly.
Star
Washer
STEP 5 - Optional for some models (Note: Refer to the style of assembly that matches the style of your fixture.)
STYLE#1
Glass
Spinner
Nut
STYLE#1 - Remove spinner nut from
socket. Position glass on the fixture
and secure with spinner nut. Install
Optional
proper bulb type and wattage.
Fixture
STYLE#2 STYLE#2 - Install proper bulb type
and wattage. Install the glass to the
fixture by tightening the 2 thumb
screws.
Note: Glass may face up or down.
Socket
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement