Aplex | ADP-1151W | User manual | Aplex ADP-1151W User manual

ADP-1101 Display Monitor
User Manual
Release Date
Revision
April 2005
May 2007
®2005 Aplex Technology, Inc.
V0.1
V0.2
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan
Tel: 886-2-82262881
Fax: 886-2-82262883
E-mail: aplex@aplex.com.tw URL: www.aplex.com.tw
ADP-1101 User Manual
1
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
Used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
Operated in a commercial environment. Operation of this equipment in a residential area is likely
To cause interference in which case the user at his own expense will be required to take whatever
Measures may be required to correct the interference
Electric Shock Hazard – Do not operate the workstation with its back cover removed. There are
dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
ADP-1101 User Manual
2
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter 1
Getting Started
1.1 Features………………………………………………………….…..…..…4
1.2 Specifications…………………………………………. ...……………...….4
1.3 Dimensions…………………………………...………………………….…6
1.4 Brief Description...................................................................................7
1.5 Display Mode……………………………………………………………….8
Chapter 2
OSD
2.1 Front Panel Controls………….………………………………….…..…….9
2.2 OSD Controls………………………………………………………………..9
2.3 Main Menu…..……………………………………………………………..10
2.4 AD Board (TB-6020) OSD Functions……………………………………12
Figures
Figure 1.1: Dimensions of ADP-1101….……………………………………..6
Figure 1.4: Front View…..….………………………………………………….7
Figure 1.5: Rear View…………………..……………………………………...8
Appendix
Panelmounting…..…………………………………………………………….13
ADP-1101 User Manual
3
Chapter 1_____________________________
1.1 Features
●
●
●
●
●
10.4” SVGA color TFT LCD display
Heavy-duty steel chassis
Plastic front panel is IP65-certified.
OSD on the rear side
Analog RGB signal direct input offering multi-scan function
1.2 Specifications
Display
●
●
●
●
●
●
●
●
●
●
●
Display: 10.4” SVGA color TFT LCD display
Maximum resolution: 800 x 600
Maximum colors: 256K
Dot size (mm): 0.264 x 0.264
Luminance: 250 cd/m²
Viewing angle: 130˚(H), 110˚(V)
Backlight life: 50,000 hours
OSD control: Yes
Touch screen: analog resistive
OS compatibility: Win 95/98, XP, 2000, NT4.0, QNX, Linux
Power Supply: 12V DC @0.9A
Mechanical
●
●
●
●
●
●
●
●
Construction: heavy-duty steel chassis
IP65-certified plastic front panel
Mounting: panel mount
Input signal: analog RGB
OSD on the rear side
Dimensions: 317(W) x 243(H) x 43.5mm (D)
Cutout Dimensions: 303(W) x 229mm (H)
Gross Weight: 4.2kg
ADP-1101 User Manual
4
Environmental
●
●
●
●
●
●
Operating temperature: 0 to 45℃ (32 to 113℉)
Storage temperature: -20 to 60℃ (-4 to 140℉)
Relative humidity: 10 to 95% @40℃, non-condensing
Vibration: 1G peak, 10~150Hz
Shock: 30G peak acceleration (11 msec.duration)
EMC: CE, FCC Class A
Ordering Information
ADP-1101
ADP-1101T
10.4” industrial display monitor (plastic bezel)
10.4” industrial display monitor with sealed touch screen (plastic bezel)
ADP-1101 User Manual
5
1.3 Dimensions
Figure 1.1: Dimensions of the ADP-1101
ADP-1101 User Manual
6
1.4 Brief Description of the ADP-1101
The ADP-1101 features an excellent viewing ability for monitoring and control applications. It is
available with resistive touch screen that is easy to use and maintain.
The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is
panel-mounted in a NEMA rated cabinet or enclosure.
Figure 1.2: Front View of the ADP-1101
ADP-1101 User Manual
7
`Figure 1.3: Rear View of ADP-1101
1.5 Display Mode
Display Mode
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
1152 x 864
SXGA
1280 x 1024
ADP-1101 User Manual
Hori. Sync (KHz)
Vert. Sync. (Hz)
31
60
38
72
38
75
35
56
38
60
48
72
47
75
48
60
56
70
60
75
68
75
64
60
80
75
8
Chapter 2_____________________________
2.1 Front Panel Controls
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press
(Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the (
/
or +/-) key in the menu.
3. Press
(Menu) and then choose the item with the (
4. Press
(Menu) and then adjust the quality with the (
ADP-1101 User Manual
or +/-) key.
/
/
or +/-) key.
9
2.3 Main Menu
In the Main menu, there are the following items:
z Color
z Image Setting
z Position
z OSD Menu
z Language
z Misc
z Exit
For Color, check out the following:
z Contrast
z Brightness
z Color Adjust
z Color Temp
z Back
For Image setting, check out the following:
z Clock
z Phase
z Gamma
z Sharpness
z Back
ADP-1101 User Manual
10
In the Position, there are the following:
z H. Position
z V. Position
z Back
In the OSD menu, there are:
z
z
z
z
OSD H. Pos.
OSD V. Pos.
OSD Timer
Back
In the Language menu, there are:
z
z
z
z
z
z
z
English
Frances
Germany
Spanish
Traditional Chinese
Simplified Chinese
Japanese
In the Misc menu, there are:
z Signal Source
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
z Reset
z Back
ADP-1101 User Manual
11
2.4 AD Board (TB-6020) OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the
buttons until the AC power cord is connected and the “RGB” appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the
button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if Cable Not Connected
is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.)
If the “RGB” is still on the top left corner of the screen, press
choose “Reset”, and then Yes, and press
to enter “Miscellaneous” and
. When the screen goes black, disconnect power and
repeat the above steps.
buttons
2.)
If the “RGB” is not found, disconnect the AC power cord first. Then press the
3.)
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
Functions of OSD Keys
Auto Adjust
Up/Left Down/Right Power
Menu/Entry
ADP-1101 User Manual
Power Indicator
12
Appendix_____________________________
Panel Mounting
The ADP-1101 display monitor is designed to be panel-mounted as shown in Figure A. Just carefully
place the unit through the hole and tighten the given 8 screws from the rear to secure the mounting.
Figure A: Panelmounting of the ADP1101
ADP-1101 User Manual
13
Download PDF