Moxa Technologies | MGate MB3000 Modbus | Specifications | Moxa Technologies MGate MB3000 Modbus Specifications

Industrial Ethernet Gateways
Product Selection Guide
Industrial Ethernet Gateways�����������������������������������������������������������������������������������������������������������������������������������4-2
Industrial Ethernet Gateways (Wireless)�����������������������������������������������������������������������������������������������������������������4-4
Ethernet Fieldbus Gateways
Introduction to Industrial Ethernet Gateways���������������������������������������������������������������������������������������������������������4-5
MGate™ MB3180/3280/3480: 1, 2, and 4-port standard serial-to-Ethernet Modbus gateways�����������������������������������4-8
MGate™ MB3170/3270: 1 and 2-port advanced serial-to-Ethernet Modbus gateways �������������������������������������������� 4-10
MGate™ EIP3000 Series: 1 and 2-port EtherNet/IP-to-DF1 gateways������������������������������������������������������������������������ 4-13
MGate™ 4101-MB-PBS Series: 1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways�������������������������������������� 4-16
MGate™ 5101-PBM-MN Series: 1-port PROFIBUS-to-Modbus TCP gateways �������������������������������������������������������� 4-18
MGate™ 5102-PBM-PN Series: 1-port PROFIBUS-to-PROFINET gateways �������������������������������������������������������������� 4-20
MGate™ 5105-MB-EIP Series: 1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways �������������������������������������� 4-22
MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series: 1 and 2-port Modbus and DNP3 to cellular VPN gateways����4-24
4
Industrial
Ethernet
Gateways
Industrial Ethernet Gateways
Industrial Ethernet Gateways
MGate MB3180
MGate MB3280
MGate MB3170 (-IEX)
MGate MB3170-T (-IEX)
MGate MB3170I (-IEX)
MGate MB3170I-T (-IEX)
MGate MB3480
MGate MB3270 (-IEX)
MGate MB3270-T (-IEX)
MGate MB3270I (-IEX)
MGate MB3270I-T (-IEX)
MGate EIP3170 (-IEX)
MGate EIP3170-T (-IEX)
MGate EIP3170I (-IEX)
MGate EIP3170I-T (-IEX)
MGate EIP3270 (-IEX)
MGate EIP3270-T (-IEX)
MGate EIP3270I (-IEX)
Ethernet Interface
4
Protocol
Number of Ports
Speed
Connector
Magnetic Isolation
Protection
Modbus TCP
1
10/100 Mbps, Auto MDI/MDIX
RJ45
CIP (PCCC) on Ethernet/IP
2 (1 IP, Ethernet cascade)
2 (2 IPs)
1.5 kV (built-in)
Serial Interface
Industrial Ethernet Gateways > Product Selection Guide
Protocol
Number of Ports
Serial Standards
Modbus RTU/ASCII Slave/Master
1
2
RS-232/422/485
Connectors
DB9-M
ESD Protection
RS-485 Data
Direction Control
Serial
Communication
Parameters
Parity
Flow Control
Baudrate
Isolation
15 kV
4
1
2
DF1 Full-duplex
1
RS-232/422
2
RS-232: DB9-M
RS-422/485: Terminal
block
DB9-M
RS-232: DB9-M
RS-422: Terminal block
DB9-M
ADDC®
–
Data Bits: 7, 8
Stop Bits: 1, 2
Data Bits: 8
Stop Bits: 1, 2
None, Even, Odd, Space, Mark
RTS/CTS, DTR/DSR (RS-232 only)
50 bps to 921.6 Kbps
–
–
None, Even, Odd
1200 bps to 921.6 Kbps
–
2 kV (built-in, -I model only)
Software
Utilities
Smart Routing
Serial Redirection
ProCOM
Priority Control
MXview
SNMP
MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
P
P
P
P
P
P
–
–
–
–
P
P
–
–
–
P
P
–
–
–
P
P
P
P
P
v1 (read only)
P
–
P
–
P
P
P
P
–
P
Physical Characteristics
Housing
Dimensions
Metal (IP30)
22 x 52 x 80 mm
22 x 77 x 111 mm
35.5 x 102.7 x 157.2 mm
Plastic
29 x 89.2 x 118.5 mm
Environmental Limits
Operating
Temperature
Operating
Humidity
Storage
Temperature
Atmospheric
Pressure
0 to 55°C
0 to 60°C or -40 to 75°C (-T model only)
5 to 95% RH
-20 to 70°C
-40 to 85°C
Up to 2000 m (795 hPa), higher altitudes on demand
Power Requirements
Input Voltage
Power Connector
12 to 48 VDC
Power jack
Power jack and terminal block
Terminal block
Standards and Certifications
Safety
Hazardous
Location
EMC
EMI
EMS
Marine
Shock
Freefall
Vibration
UL 60950-1, EN 60950-1
–
–
UL 508, EN 60950-1
–
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024,
EN 61000-4-2 (ESD) Level 2,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 1,
EN 61000-4-11
–
–
–
–
–
–
–
–
–
–
–
–
UL/cUL Class 1 Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nA IIC T3 Gc, IECEx (-IEX model only)
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 1,
EN 61000-4-11
DNV
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Reliability
Warranty
4-2
5 years (see www.moxa.com/warranty)
w w w. m o x a . c o m
info@moxa.com
–
–
Industrial Ethernet
Industrial Ethernet Gateways
MGate 4101-MB-PBS
MGate 4101-MB-PBS-T
MGate 4101I-MB-PBS
MGate 4101I-MB-PBS-T
MGate 5101-PBM-MN
MGate 5101-PBM-MN-T
MGate 5102-PBM-PN
MGate 5102-PBM-PN-T
MGate 5105-MB-EIP
MGate 5105-MB-EIP-T
–
–
–
–
–
Modbus TCP
1
RJ45
1.5 kV (bulit-in)
10/100 Mbps, Auto MDI/MDIX
PROFINET RT
2 (1 IP, Ethernet cascade)
EtherNet/IP, Modbus TCP
PROFIBUS DP-V0 Slave
1
9600 bps to 12 Mbps
DB9-F
2 kV (built-in)
PROFIBUS DP-V1 Master
1
RS-232/422/485, software selectable
DB9-M
15 kV
ADDC®
Data Bits: 7, 8
Stop Bits: 1, 2
None, Even, Odd, Space, Mark
RTS/CTS, DTR/DSR (RS-232 only)
50 bps to 921.6 Kbps
2 kV (built-in, -I model only)
–
–
–
–
–
Ethernet Interface
Protocol
Number of Ports
Connectors
Magnetic Isolation Protection
Speed
PROFIBUS Interface
–
–
–
–
–
4
Industrial Ethernet Gateways > Product Selection Guide
Protocol
Number of Ports
Data Rate
Connector
Isolation Protection
Modbus Interface
Number of Ports
Serial Standards
Connectors
ESD Protection
RS-485 Data Direction Control
Serial Communication
Parameters
Parity
Flow Control
Baudrate
Isolation Protection
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
RS-232/422/485, software selectable
DB9-M
–
ADDC®
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS, RTS Toggle
50 bps to 921.6 kbps
2 kV (built-in)
Software
Utilities
QuickLink
Paging
AutoScan
MXview
SNMP
MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
P
–
–
P
–
–
P
P
–
P
P
–
–
v1, v2, v3, Private MIB
–
–
–
P
Physical Characteristics
Housing
Dimensions
Storage Card Slot
Metal (IP30)
36 x 105 x 140 mm
–
1 microSD (SDHC) card slot (supports up to 32 GB)
Environmental Limits
Operating Temperature
Operating Humidity
Storage Temperature
Atmospheric Pressure
0 to 60°C or -40 to 75°C (-T model only)
5 to 95% RH
-40 to 85°C
Up to 2000 m (795 hPa), higher altitudes on demand
Power Requirements
Input Voltage
Power Connector
12 to 48 VDC
Terminal block
Standards and Certifications
Safety
Hazardous Location
EMC
EMI
EMS
Shock
Freefall
Vibration
UL 60950-1, EN 60950-1
UL/cUL Class 1 Division 2 Groups A/B/C/D (Pending),
ATEX Zone 2 Ex nA nC IIC T3 Gc (Pending),
IECEx (Pending)
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024,
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 3,
EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 1
EN 61000-4-8 (PFMF) Level 1
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
UL 508, EN 60950-1
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA nC IIC T3 Gc,
IECEx (Pending)
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 3
Reliability
Warranty
5 years (see www.moxa.com/warranty)
info@moxa.com
w w w. m o x a . c o m
4-3
Industrial Ethernet Gateways
Industrial Ethernet Gateways (Wireless)
MGate 5106-DNMB-GSM
MGate 5106-DNMB-GSM-T
MGate 5207-DNMB-HSPA
MGate 5207-DNMB-HSPA-T
Ethernet Interface
4
Protocol
Number of Ports
Connectors
Magnetic Isolation Protection
Speed
Modbus TCP, DNP3 IP
1
RJ45
1.5 kV (built-in)
10/100 Mbps, Auto MDI/MDIX
2 (1 IP, Ethernet cascade)
Serial Interface
Industrial Ethernet Gateways > Product Selection Guide
Protocol
Number of Ports
Serial Standards
Baudrate
Flow Control
Serial Communication Parameters
Parity
Connector
Modbus RTU/ASCII, DNP3 Serial
1
RS-232/422/485, software selectable
50 to 921.6 Kbps
RTS/CTS, RTS Toggle
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
None, Even, Odd, Space, Mark
DB9-M
2
Wireless Network
Number of SIM Card
Number of Antenma
1
1
Broadband
GSM/GPRS: 850/900/1800/1900 MHz
Generation
2.5 G
Class
GPRS: 10
2
2
GSM/GPRS/EDGE: 850/900/1800/1900 MHz,
UMTS/HSPA: 850/900/1700/1900/2100 MHz,
AWS: 1700/2100 MHz
3.75 G
GSM: 4 (850/900), 1 (1800/1900)
EDGE: E2, WCDMA: 3
Inputs and Outputs
Digital Input
Digital Output
Contact Type
DI:Dry Contact
DI:Wet Contact (COM to DI)
DOUT (Sink Type)
1 channel
1 channel
4-pin terminal block
Logic 0: Short to GND
Logic 1: Open
Logic 0: +10~30 VDC
Logic 1: 0~+3 VDC
Current: Max. 200 mA Per channel
Voltage: Max. 30 VDC
2 channels
2 channels
6-pin terminal block
Software
Utilities
Network Protocol
VPN
MXview
SNMP
MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
UDP/TCP, SNTP, ICMP, DDNS, DHCP, PPP, DNS, HTTP/HTTPS, Telnet, SSH, SNMP, ARP
IPSec, PPTP, L2TP, Port Forwarding, IP Filter

v1, v2, v3, Private MIB
Physical Characteristics
Housing
Dimensions
Storage Card Slot
Metal (IP30)
45.8 x 134.8 x 105 mm
–
1 microSD (SDHC) card slot (supports up to 32 GB)
Environmental Limits
Operating Temperature
Operating Humidity
Storage Temperature
Atmospheric Pressure
0 to 60°C or -40 to 75°C (-T model only)
5 to 95% RH
-40 to 85°C
Up to 2000 m (795 hPa), higher altitudes on demand
Power Requirements
Input Voltage
Power Connector
9 to 60 VDC
3-pin terminal block
Standards and Certifications
Safety
EMC
EMI
EMS
Shock
Freefall
Vibration
Radio
UL 508, EN 60950-1
CE, FCC
EN 55022 Class A, FCC Part 15 Subpart B Class A
EN 55024, EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 3
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
FCC Part 22H, FCC Part 24E, EN 301489-1, EN 301489-7, EN 301511
Reliability
Warranty
4-4
5 years (see www.moxa.com/warranty)
w w w. m o x a . c o m
info@moxa.com
FCC Part 22H, FCC Part 24E, EN 301489-1, EN 301489-24, EN 301908-1
Industrial Ethernet
Introduction to Industrial Ethernet
Gateways
Get Integrated—It’s Quick, Easy, and Reliable
Innovative and Easy-to-Use Industrial Gateways Create Seamless Connections and Compatibility
The need for industrial Ethernet gateway solutions is not only driven by the increasing demand for connecting industrial Ethernet protocols (such as
EtherNet/IP, Modbus TCP, or PROFINET) to existing fieldbus networks, but by maximizing efficiency as well. Moxa’s comprehensive industrial Ethernet
gateway solutions, the MGate series, are designed with innovative and automated technology to ensure quick installation and easy management of
your industrial fieldbus-to-Ethernet networks. To help you master fieldbus communications, Moxa also delivers industrial fieldbus gateways to transfer
control data between different fieldbus protocols.
Typical MGate Gateway Applications
4
Quick Installation
Reliable Performance
Management Level
Easy to Maintain
Industrial Ethernet Gateways > Introduction to Industrial Ethernet Gateways
• PLC as slave:
Integrate field devices to allow remote monitoring and management
SCADA Monitor
EtherNet/IP
AutoCalibration
PLC
Modbus RTU/ASCII
Field Level
To assist engineers of complex industrial automation systems with
the troublesome configuration process, Moxa’s MGate industrial
gateway solution, MGate Manager, provides a user-friendly windowsbased utility to make integration easier. It contains AutoCalibration
or QuickLink patented technologies to enable a quick installation and
configuration of industrial gateways in just minutes.
MGate 5105-MB-EIP
Modbus-to-EtherNet/IP
Gateway
Control Level
Quick Installation, in Just Minutes
Power Meter
Water Meter
Pressure Gauge
1-click Detection of Response Timeout
• PLC as master:
Integrate new intelligent devices with existing devices
Control Level
In master-slave fieldbus communication networks, precise response
timeout settings are an important yet complicated task for network
integrators when trying to calibrate accurate timeframes to achieve
optimized system performance. In the past, integrators often
spent a substantial amount of time in trying to manually configure
timeout settings through trial-and-error methods. Moxa’s patented
AutoCalibration technology offers a 1-click automated approach to
auto-configure response timeout settings.
PLC
HMI
PROFINET
Field Level
Products: MGate MB3180/3280/3480 Series,
MGate MB3170/3270 Series
MGate 5102-PBM-PN
PROFIBUS-to-PROFINET
Gateway
I/O
Drive
PROFIBUS
Water Meter
info@moxa.com
w w w. m o x a . c o m
Drive
4-5
Industrial Ethernet Gateways
QuickLink
AutoLearning and AutoMapping Intelligence for
Connecting Modbus to PROFIBUS
QuickLink, an innovative Moxa technology, simplifies the configuration
of gateways to enable seamless connections between Modbus
and PROFIBUS communications. QuickLink supports intelligent
AutoLearning and AutoMapping, and replaces traditional methods of
gateway configuration that are tedious and time-consuming. QuickLink
is a standard feature of Moxa’s MGate Manager utility that not only
allows system integrators to finish their gateway configuration in just
minutes, but also ensures that configurations are done right the first
time, virtually eliminating the possibility of human error.
Products: MGate 4101-MB-PBS Series
AutoScan
4
One-Click Detection of I/O Parameters
Industrial Ethernet Gateways > Introduction to Industrial Ethernet Gateways
Moxa’s industrial Ethernet gateways feature AutoScan, which detects
all connected PROFIBUS slave devices and their available Read
Configuration Data (Get_Cfg). After configuration is done, an easyto-read data mapping table is created to assist in the configuration of
Modbus TCP masters, such as SCADA servers and PLCs. With Moxa’s
AutoScan, you no longer need to spend a lot of time configuring
devices yourself, but instead can focus on monitoring data without
needing to worry about every different protocol.
Products: MGate 5101-PBM-MN Series, MGate 5102-PBM-PN
Series
Easy to Maintain, with Built-in Monitoring and Diagnostics
Web-based Monitoring Tool
Moxa’s industrial Ethernet gateways feature a web-based monitoring
tool that supports data import/export and log recording capabilities.
The monitoring tool streamlines device configuration, maintenance,
and troubleshooting, and supports encryption functions such as
HTTPS and SSH to prevent unauthorized access. With this tool, users
can reduce their cost since they won’t need to purchase additional
monitoring tools.
Real-Time Control of Fieldbus-to-Ethernet Networks
Real-time monitoring is critical for any industrial system, and
Moxa’s MGate Manager Windows utility is not only designed for
easy configuration, but also for uninterrupted monitoring and
troubleshooting of the connections between the fieldbus system and
remote control system. MGate Manager logs events initiated by the
gateway, and records all commands and responses that pass through
the gateway, assisting users in determining the root cause of failures
and identifying performance bottlenecks. The automatic relay output
warning for the Ethernet link and power input status gives maintenance
engineers an intelligent notification tool for quick troubleshooting and
easy maintenance.
Reliable Performance, for Uninterrupted Operation
For mission-critical industrial applications, the failure of a single
link can affect operational efficiency. Moxa’s gateways are certified
for use in hazardous environments (ATEX Zone 2, Class 1 Division
2), support a -40 to 75°C wide operating temperature (the highest
operating temperature on the market; available with some models),
and feature dual power inputs for connecting to a redundant power
source to ensure reliable performance. In addition, Moxa gateways
4-6
w w w. m o x a . c o m
are recognized by several important organizations, such as PROFIBUS
& PROFINET International (PI), Open DeviceNet Vendors Association
(ODVA™), and the Modbus Organization (Modbus.org).
info@moxa.com
Industrial Ethernet
Applications
Oil Pipeline Monitoring
Modbus RTU/ASCII to Modbus TCP (cellular network)
DNP3 Serial to DNP3 IP (cellular network)
Pipeline networks can stretch for
hundreds of miles. To decrease the
risk of explosions and leakage, a
reliable remote monitoring system
that includes meters and PLCs to
manage onsite operations is an
absolute must. As a result, many
systems now use a cellular network to transmit Modbus RTU data
from field devices back to the SCADA Modbus TCP network. In these
situations, a Modbus gateway that supports cellular transmissions and
VPN tunneling is required to provide a reliable and secure connection.
Base Station
SCADA Monitor
Internet
Oil Pipeline
Station A
Station B
5106-DNMB-GSM:
5207-DNMB-HSPA:
DNP and Modbus RTU/
ASCII-to-cellular
Gateway
DNP and Modbus RTU/
ASCII-to-cellular
Gateway
Modbus RTU
PLC
Modbus RTU
Gas
Pressure
Detector Detector
PLC
4
Pressure
Gas
Detector Detector
PROFIBUS to Modbus TCP
Industrial Ethernet Gateways > Introduction to Industrial Ethernet Gateways
Drilling Rig Control and Monitoring
SCADA Monitor
IPC
Drilling for oil and gas involves many
risks, and even a tiny mistake could
cause leaks or spills that result in
serious accidents and contribute to
environmental pollution. To prevent
accidents and ensure accurate
drive-to-drill operation, operators
use industrial gateways to bridge
Modbus TCP networks with PROFIBUS-based meters or drives for
real-time remote control.
Modbus TCP
MGate 5101-PBM-MN
PROFIBUS-to-Modubs TCP Gateway
PROFIBUS
Drive
Meter
Monitoring a Small-Scale Power Generation System
Modbus RTU/ASCII to Modbus TCP
Industrial plants often have their
own power generation systems to
provide an uninterrupted power
supply. To enable continuous
monitoring, Modbus is commonly
adopted as a communication
protocol to transmit large volumes
of Modbus RTU monitoring
information from power RTUs, Intelligent Electronic Devices, and
meters, via industrial gateways to the process control system running
on a Modbus TCP network.
SCADA Monitor
Modbus TCP
Switch
Station A
Station B
MGate MB3180
MGate MB3170I
Modbus RTU/
ASCII-to-Modbus
TCP Gateway
Switch
Modbus RTU
Power Meter
Power RTU
Modbus RTU/ASCII-toModbus TCP Gateway
Switch
Modbus RTU
Intelligent Electronic Device
Power Meter
Power RTU
Intelligent Electronic Device
Electric Control Panel Monitoring
Modbus RTU/ASCII to EtherNet/IP
PLC
EtherNet/IP is a communications
protocol developed by Rockwell
Automation, and is widely used in
many large-scale power systems
for remote monitoring to ensure
reliable performance and energy
control. Although ControlLogix
PLCs support Modbus modules
for connecting a Modbus RTU to EtherNet/IP, it may be too expensive
to modify the PLC code and a convenient rack slot may not be
available. For this reason, gateways have become a popular way to
achieve Modbus communication requirements.
info@moxa.com
EtherNet/IP
MGate 5105-MB-EIP
Modbus TCP/RTU/ASCII-to-EtherNet/IP Gateway
Modbus RTU
Power Protector
Inverter
w w w. m o x a . c o m
Power Meter
4-7
Industrial Ethernet Gateways
MGate™ MB3180/3280/3480
1, 2, and 4-port standard serial-to-Ethernet Modbus gateways
››Convert between Modbus TCP and Modbus RTU/ASCII
››1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
››16 simultaneous TCP masters with up to 32 simultaneous
requests per master
››Easy hardware setup and configuration
4
Industrial Ethernet Gateways > MGate™ MB3180/3280/3480
Overview
The MB3180, MB3280, and MB3480 are standard Modbus gateways
that convert between Modbus TCP and Modbus RTU/ASCII protocols.
Up to 16 simultaneous Modbus TCP masters are supported, with up to
Standard Modbus Network Integration
The three standard MGate™ models (MB3180, MB3280, and MB3480)
are designed for easy integration of Modbus TCP and RTU/ASCII
networks. With these models, Modbus serial slave devices can be
seamlessly incorporated into an existing Modbus TCP network, and
Modbus TCP slaves can be made accessible to serial masters. The
MB3180, MB3280, and MB3480 offer features that make network
integration easy, customizable, and compatible with almost any
Modbus network.
High Density, Cost-effective Gateways
The MGate™ MB3000 gateways can effectively connect a high density
of Modbus nodes to the same network. The MB3280 can manage
up to 62 serial slave nodes, and the MB3480 can manage up to 124
serial slave nodes. Each RS-232/422/485 serial port can be configured
individually for Modbus RTU or Modbus ASCII operation and for
different baudrates, allowing both types of networks to be integrated
with Modbus TCP through one Modbus gateway.
Specifications
Ethernet Interface
Flow Control: RTS/CTS, DTR/DSR (RS-232 only)
Baudrate: 50 bps to 921.6 kbps
Protocol: Modbus TCP
Number of Ports: 1
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
Serial Interface
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Protocol: Modbus RTU/ASCII Slave/Master
Number of Ports:
MB3180: 1
MB3280: 2
MB3480: 4
Serial Standards: RS-232/422/485, software selectable
Connectors: DB9 male
ESD Protection: 15 kV for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Software
Serial Communication Parameters
Housing: Metal, IP30 protection
Weight:
MGate MB3180: 340 g
MGate MB3280: 360 g
MGate MB3480: 740 g
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Even, Odd, Space, Mark
4-8
31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32
TCP slaves are supported.
w w w. m o x a . c o m
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Utility
Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Multi-master and Multi-drop:
Master mode: 32 TCP slaves
Slave mode: 16 TCP masters (request queue 32-deep for each master)
Support: Smart Routing, MXview, SNMP v1 (read only)
Physical Characteristics
info@moxa.com
Industrial Ethernet
Standards and Certifications
Dimensions:
Without ears:
MB3180: 22 x 52 x 80 mm (0.87 x 2.05 x 3.15 in)
MB3280: 22 x 77 x 111 mm (0.87 x 3.03 x 4.37 in)
MB3480: 35.5 x 102.7 x 157.2 mm (1.40 x 4.04 x 6.19 in)
With ears:
MB3180: 22 x 75 x 80 mm (0.87 x 2.95 x 3.15 in)
MB3280: 22 x 100 x 111 mm (0.87 x 3.94 x 4.37 in)
MB3480: 35.5 x 102.7 x 181.3 mm (1.40 x 4.04 x 7.14 in)
Safety: UL 60950-1, EN 60950-1
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 2,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 1,
EN 61000-4-11
Environmental Limits
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Reliability
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
4
MTBF (mean time between failures):
MGate M3180: 628,376 hrs
MGate M3280: 503,029 hrs
MGate M3480: 295,812 hrs
Power Requirements
Input Voltage: 12 to 48 VDC
Power Connector:
MGate MB3180: Power jack
MGate MB3280/3480: Power jack and terminal block
Power Consumption:
MGate M3180: 200 mA (max.)
MGate M3280: 250 mA (max.)
MGate M3480: 385 mA (max.)
Warranty
Industrial Ethernet Gateways > MGate™ MB3180/3280/3480
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
35.5 (1.40)
22 (0.87)
Top View
22 (0.87)
75 (2.95)
52 (2.05)
38.87
(1.53)
34 (1.34)
21.5 (0.85)
5
(0.20)
34 (1.34)
77 (3.03)
88 (3.46)
100 (3.94)
25
(0.98)
102.72 (4.04)
43 (1.69)
111 (4.37)
43
(1.69)
10 (0.39)
25
(0.98)
25
(0.98)
12.5
(0.49)
80 (3.15)
55.5 (2.19)
50.5 (1.99)
63 (2.48)
Front View
181.3 (7.14)
169.3 (6.67)
157.23 (6.19)
9 (0.35)
Bottom View
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
• 1 MGate MB3180 or MB3280 or MB3480
modbus gateway
• Power Adaptor
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
MGate MB3180: 1-port standard Modbus gateway
MGate MB3280: 2-port standard Modbus gateway
MGate MB3480: 4-port standard Modbus gateway
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DK-35A: Mounting kit for 35-mm DIN-rail
DK-35A
info@moxa.com
w w w. m o x a . c o m
4-9
Industrial Ethernet Gateways
MGate™ MB3170/3270
1 and 2-port advanced serial-to-Ethernet Modbus gateways
››Configuration is exceptionally easy
››Slave mode supports 16 TCP masters and up to 31 or 62 serial
slaves at the same time
››Master mode supports 32 TCP slaves at the same time
››Emergency request tunnels ensure QoS control
››Serial redirector function provided
››Embedded Modbus protocol analyzer
››Redundant dual DC power inputs
››Built-in Ethernet cascading for easy wiring
4
Industrial Ethernet Gateways > MGate™ MB3170/3270
Overview
The MB3170 and MB3270 are advanced Modbus gateways that
provide maximum flexibility for integrating industrial Modbus networks
of all types and sizes. They are designed to integrate Modbus TCP,
ASCII, and RTU devices in almost any master and slave combination,
including serial master to serial slave, or simultaneous serial and
Ethernet masters. A special priority control feature allows urgent
commands to obtain an immediate response. All models are ruggedly
constructed, are DIN-rail mountable, and offer built-in optical isolation
for serial signals as an option.
Integrate TCP Masters without Altering the Modbus RTU/ASCII Network or Software
The MB3270 can integrate Modbus TCP with Modbus RTU/ASCII,
without modifying the existing Modbus RTU/ASCII architecture or
software. With the serial redirector function, a serial master can
maintain direct access to serial slave devices through a specially
mapped serial port. This allows the serial and TCP masters to access
serial slaves simultaneously.
Cascade Ethernet Ports for Easy Wiring
Advanced models of the MGate™ MB3000 series have two Ethernet
ports to make network wiring easier. Dual Ethernet ports allow users
to string multiple Modbus gateways together using standard RJ45
Ethernet cables, eliminating the need for a separate Ethernet switch.
Redundant Power Inputs
Advanced models of the MB3000 series have dual power inputs for
greater reliability. The power inputs allow simultaneous connections to
two live DC power sources, so that continuous operation is provided
even if one power source fails. The higher level of reliability makes
these advanced Modbus gateways ideal for demanding industrial
applications.
Warning by Relay Output
A relay output is provided for the Ethernet link and power input status.
The relay output gives maintenance engineers an additional tool for
4-10
w w w. m o x a . c o m
troubleshooting and maintenance.
info@moxa.com
Industrial Ethernet
Priority Control for Urgent Commands (Patented)
As Modbus networks increase in size and complexity, the lag time
between commands and responses becomes a major concern.
Advanced models of the MB3000 series provide a priority control
function for urgent commands, allowing users to force certain
commands to get an immediate response. Depending on your
system’s requirements, different methods are available to define which
commands receive priority.
Patent Numbers: (US/TW)
US7,743,192 B2 / I332618
US7,725,635 B2 / I321007
Specifications
Ethernet Interface
With ears extended: 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)
Environmental Limits
Protocol: Modbus TCP
Number of Ports: 2 (1 IP, Ethernet cascade)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
Protocol: Modbus RTU/ASCII Slave/Master
Number of Ports:
MB3170/3170I: 1
MB3270/3270I: 2
Serial Standards: RS-232/422/485, software selectable
Connectors:
MB3170/3170I: DB9 male for RS-232, terminal block for RS-422/485
MB3270/3270I: DB9 male x 2
ESD Protection: 15 kV for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ
Terminator for RS-485: 120 Ω
Serial Communication Parameters
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Configuration Options: Web Console, Serial Console, Telnet Console,
Windows Utility
Utility: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Multi-master and Multi-drop:
Master mode: 32 TCP slaves
Slave mode: 16 TCP masters (request queue 32-deep for each master)
Support: Smart Routing, Serial Redirection, ProCOM, Priority Control,
MXview, SNMP v1 (read only)
Physical Characteristics
Housing: Plastic
Weight:
MGate MB3170: 360 g
MGate MB3270: 380 g
Dimensions:
Without ears: 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption:
MGate MB3170: 435 mA (max.)
MGate MB3170I: 555 mA (max.)
MGate MB3270: 435 mA (max.)
MGate MB3270I: 510 mA (max.)
Relay Output:
1 digital relay output to alarm (normal close): Current carrying capacity
1 A @ 30 VDC
Standards and Certifications
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR (RS-232 only)
Baudrate: 50 bps to 921.6 kbps
Software
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Safety: UL 508, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA IIC T3 Gc, IECEx (-IEX model only)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 1,
EN 61000-4-11
Marine: DNV
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
4
Industrial Ethernet Gateways > MGate™ MB3170/3270
Serial Interface
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Reliability
MTBF (mean time between failures):
MGate MB3170: 210,794 hrs
MGate MB3270: 125,234 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
w w w. m o x a . c o m
4-11
Industrial Ethernet Gateways
Dimensions
Unit: mm (inch)
Top View
20.6 (0.81) 29.91 (1.18)
Front View
Rear View
29 (1.14)
14.5
(0.57)
14.5
(0.57)
MGate™ MB3170
89.2 (3.51)
9.2 (0.36)
7.2 (0.28)
69.5 (2.74)
Industrial Ethernet Gateways > MGate™ MB3170/3270
118.5 (4.67)
25.9 (1.02)
124.5 (4.9)
7.2 (0.28)
7.1 (0.28)
20 (0.79)
4
7.1 (0.28)
35 (1.38)
MGate™ MB3270
25.9 (1.02)
Side View
35 (1.38)
Bottom View
Ordering Information
Available Models
MGate MB3170: 1-port advanced Modbus gateway, 0 to 60°C operating temperature
MGate MB3170I: 1-port advanced Modbus gateway with 2 kV isolation, 0 to 60°C operating temperature
MGate MB3270: 2-port advanced Modbus gateway, 0 to 60°C operating temperature
MGate MB3270I: 2-port advanced Modbus gateway with 2 kV isolation, 0 to 60°C operating temperature
MGate MB3170-T: 1-port advanced Modbus gateway, -40 to 75°C operating temperature
MGate MB3170I-T: 1-port advanced Modbus gateway with 2 kV isolation, -40 to 75°C operating temperature
MGate MB3270-T: 2-port advanced Modbus gateway, -40 to 75°C operating temperature
MGate MB3270I-T: 2-port advanced Modbus gateway with 2 kV isolation, -40 to 75°C operating temperature
MGate MB3170-IEX: 1-port advanced Modbus gateway, 0 to 60°C operating temperature, IECEx certification
MGate MB3170I-IEX: 1-port advanced Modbus gateway with 2 kV isolation, 0 to 60°C operating temperature, IECEx certification
MGate MB3270-IEX: 2-port advanced Modbus gateway, 0 to 60°C operating temperature, IECEx certification
MGate MB3270I-IEX: 2-port advanced Modbus gateway with 2 kV isolation, 0 to 60°C operating temperature, IECEx certification
MGate MB3170-T-IEX: 1-port advanced Modbus gateway, -40 to 75°C operating temperature, IECEx certification
MGate MB3170I-T-IEX: 1-port advanced Modbus gateway with 2 kV isolation, -40 to 75°C operating temperature, IECEx certification
MGate MB3270-T-IEX: 2-port advanced Modbus gateway, -40 to 75°C operating temperature, IECEx certification
MGate MB3270I-T-IEX: 2-port advanced Modbus gateway with 2 kV isolation, -40 to 75°C operating temperature, IECEx certification
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
Package Checklist
• 1 MGate MB3170 or MB3170I or MB3270 or
MB3270I modbus gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
4-12
w w w. m o x a . c o m
info@moxa.com
Industrial Ethernet
MGate™ EIP3000 Series
1 and 2-port EtherNet/IP-to-DF1 gateways
››PCCC objects for Rockwell Automation networks supported
››Use ProCOM to implement control via COM port mapping
››8 simultaneous EtherNet/IP client/server pairs with up to 16
queued requests
››Serial redirector keeps the original serial master and slave
connection while connecting devices to the Ethernet
››EtherNet/IP and DF1 protocol analyzer for easy troubleshooting
››Redundant dual DC power inputs
››Built-in Ethernet cascading for easy wiring
››-40 to 75°C wide operating temperature models available
MGate™ EIP3000 gateways provide EtherNet/IP to DF1 protocol
conversion for users who need to connect Allen Bradley PLCs to
an EtherNet/IP network. With a number of innovative functions, the
MGate™ series overcomes the difficulties of connecting between
legacy serial devices and SCADA software. Both 1 and 2-port gateways
are available for use with different sized control networks.
Protocol Conversion between DF1 and EtherNet/IP
By supporting PCCC objects on CIP, the MGate™ EIP3000 can
communicate seamlessly with SCADA software such as RSLinx. For
users who develop control software based on EtherNet/IP, MGate
EIP3000 offers the standard interface for connection.
Support for Multiple EtherNet/IP Connections
MGate™ EIP3000 gateways support up to 16 EtherNet/IP clients
and servers simultaneously. Each client can send up to 16 requests
at a time, and the multiple connection capability can help establish
redundancy for more complex control systems.
Industrial Ethernet Gateways > MGate™ EIP3000 Series
Overview
4
Windows Utility for Easy Setup and Traffic Monitoring
Moxa provides a user-friendly Windows utility with multi-language
support. The utility supports a traffic monitoring function for
EtherNet/IP and DF1 protocols, and not only logs events initiated by
the gateway, but also records all commands and responses that pass
through the gateway. The utility helps users determine the root cause
of failures and performance bottlenecks.
info@moxa.com
w w w. m o x a . c o m
4-13
Industrial Ethernet Gateways
Serial Redirector Function Maintains Original Master/Slave Connections
The serial redirector function allows the commands of a serial master
(command initiator) to be redirected to the serial slave (command
executor) on another port. In addition, a serial master can operate
simultaneously with EtherNet/IP masters without changing the DF1
architecture or software. With the serial redirector function, MGate™
EIP3000 gateways can establish redundant control of legacy slave
devices that were originally designed to be controlled by a single serial
master.
ProCOM Implements Control via COM Port Mapping
Each MGate™ EIP3000 gateway supports virtual serial ports for the
remote PC. You can connect to the MGate™ EIP3000 through the
COM port by using Moxa’s Real COM driver, with the actual physical
4
Pull high/low Resistors and Terminator Selection
When using termination resistors to prevent serial signal reflection,
it is important to set the pull high/low resistors correctly so that the
electrical signal is not corrupted. Since no set of resistor values is
universally compatible with all environments, the EIP3000 has DIP
switches on the bottom panel for setting the termination and pull high/
low resistor values.
Industrial Ethernet Gateways > MGate™ EIP3000 Series
Built-in Isolation
Complex device networks that incorporate high amperage devices
could be subject to electrical signal distortion from electrical
discharges, magnetic noise, or common mode transients. MGate™
series products solve this problem by using built-in optical isolation.
Specifications
Ethernet Interface
Dimensions:
Without ears: 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
With ears extended: 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)
Protocol: CIP (PCCC) on EtherNet/IP
Number of Ports:
EIP3170/3170I: 2 (1 IP, Ethernet cascade)
EIP3270/3270I: 2 (2 IPs)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
Environmental Limits
Serial Interface
Protocol: DF1 Full-duplex
Number of Ports:
EIP3170/3170I: 1
EIP3270/3270I: 2
Serial Standards: RS-232/422, software selectable
Connectors:
EIP3170/3170I: DB9 male for RS-232, terminal block for RS-422
EIP3270/3270I: DB9 male x 2
ESD Protection: 15 kV for all signals
Serial Communication Parameters
Data Bits: 8
Stop Bits: 1, 2
Parity: None, Even, Odd
Flow Control: RTS/CTS, DTR/DSR (RS-232 only)
Baudrate: 1200 bps to 921.6 kbps
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
Software
Utility: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Configuration Options: Serial Console, Telnet Console, Windows Utility
Support: Smart Routing, Serial Redirection, ProCOM, MXview, SNMP
v1 (read only)
Physical Characteristics
Housing: Plastic
Weight:
MGate EIP3170: 360 g
MGate EIP3270: 380 g
w w w. m o x a . c o m
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Power Requirements
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption:
MGate M3170: 435 mA (max.)
MGate M3170I: 555 mA (max.)
MGate M3270: 435 mA (max.)
MGate M3270I: 510 mA (max.)
Standards and Certifications
Serial Signals
4-14
connection over the Ethernet. The gateway supports up to 4 virtual
COM port connections and offers greater flexibility when designing
redundant control systems.
Safety: UL 508, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA IIC T3 Gc, IECEx (-IEX model only)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 1,
EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
info@moxa.com
Industrial Ethernet
Reliability
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
MTBF (mean time between failures):
MGate EIP3170: 210,794 hrs
MGate EIP3270: 125,234 hrs
Dimensions
Unit: mm (inch)
EIP3170/EIP3270
Top View
20.6 (0.81) 29.91 (1.18)
Front View
Rear View
29 (1.14)
14.5
(0.57)
14.5
(0.57)
MGate™ EIP3170
89.2 (3.51)
9.2 (0.36)
4
7.2 (0.28)
118.5 (4.67)
124.5 (4.9)
20 (0.79)
25.9 (1.02)
35 (1.38)
MGate™ EIP3270
25.9 (1.02)
Side View
35 (1.38)
Bottom View
Ordering Information
Available Models
Industrial Ethernet Gateways > MGate™ EIP3000 Series
7.2 (0.28)
7.1 (0.28)
69.5 (2.74)
7.1 (0.28)
MGate EIP3170: 1-port EtherNet/IP-to-DF1 gateway, 0 to 60°C operating temperature
MGate EIP3170I: 1-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, 0 to 60°C operating temperature
MGate EIP3270: 2-port EtherNet/IP-to-DF1 gateway, 0 to 60°C operating temperature
MGate EIP3270I: 2-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, 0 to 60°C operating temperature
MGate EIP3170-T: 1-port EtherNet/IP-to-DF1 gateway, -40 to 75°C operating temperature
MGate EIP3170I-T: 1-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, -40 to 75°C operating temperature
MGate EIP3270-T: 2-port EtherNet/IP-to-DF1 gateway, -40 to 75°C operating temperature
MGate EIP3170-IEX: 1-port EtherNet/IP-to-DF1 gateway, 0 to 60°C operating temperature, IECEx certification
MGate EIP3170I-IEX: 1-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, 0 to 60°C operating temperature, IECEx certification
MGate EIP3270-IEX: 2-port EtherNet/IP-to-DF1 gateway, 0 to 60°C operating temperature, IECEx certification
MGate EIP3270I-IEX: 2-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, 0 to 60°C operating temperature, IECEx certification
MGate EIP3170-T-IEX: 1-port EtherNet/IP-to-DF1 gateway, -40 to 75°C operating temperature, IECEx certification
MGate EIP3170I-T-IEX: 1-port EtherNet/IP-to-DF1 gateway with 2 kV isolation, -40 to 75°C operating temperature, IECEx certification
MGate EIP3270-T-IEX: 2-port EtherNet/IP-to-DF1 gateway, -40 to 75°C operating temperature, IECEx certification
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
info@moxa.com
Package Checklist
• 1 MGate EIP3170 or EIP3170I or
EIP3270 or EIP3270I EtherNet/IP
gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
w w w. m o x a . c o m
4-15
Industrial Ethernet Gateways
MGate™ 4101-MB-PBS Series
1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways
››Protocol conversion between Modbus and PROFIBUS
››Windows utilities with innovative QuickLink function for
automatic configuration within minutes
››Redundant dual DC power inputs and relay output supported
››Embedded data packet analyzer
››Powerful and visual diagnostic tool
››-40 to 75°C wide operating temperature models available
4
Industrial Ethernet Gateways > MGate™ 4101-MB-PBS Series
Overview
The MGate 4101-MB-PBS gateway provides a communication portal
between PROFIBUS PLCs (e.g. Siemens S400 and S300 PLCs) and
Modbus devices. With the QuickLink feature, I/O mapping can be
accomplished within a matter of minutes. All models are protected with
a rugged metallic casing, are DIN-rail mountable, and offer optional
built-in optical isolation.
QuickLink and Windows Utilities for Easy Setup and Traffic Monitoring
The QuickLink windows utility uses a serial console port to connect
to the MGate 4101-MB-PBS and makes configuration and operation
as easy as possible. QuickLink can finish configuration in just
few minutes by passively detecting Modbus requests with the
AutoLearning function, and performing error-free I/O mapping with
the AutoMapping feature. QuickLink drastically reduces Modbusto-PROFIBUS integration time when compared to conventional I/O
mapping, which can easily require days to complete. Additionally,
embedded monitoring tools can maintain logs of Modbus
communication packets and assist in troubleshooting.
Redundant Power Inputs
The MGate 4101-MB-PBS has dual power inputs for greater reliability.
The power inputs allow simultaneous connections to two live DC
power sources, so that continuous operation is provided even if one
power source fails. The higher level of reliability makes these advanced
Modbus-to-PROFIBUS gateways ideal for demanding industrial
applications.
Warning by Relay Output
A relay output is provided for the power input status. The relay output
gives maintenance engineers an additional tool for troubleshooting and
maintenance.
Specifications
PROFIBUS Interface
Protocol: PROFIBUS DP-V0 Slave
Number of Ports: 1
Data Rate: 9600 bps to 12 Mbps
Connector: DB9 female
Isolation: 2 kV (built-in)
DIP Switch: For termination
Rotary Switch: PROFIBUS address 0-99 (address 100-125 supported
through software configuration)
Modbus Interface
Protocol: Modbus RTU/ASCII Slave/Master
Number of Ports: 1
4-16
w w w. m o x a . c o m
Serial Standards: RS-232/422/485, software selectable
Connectors: DB9 male
ESD Protection: 15 kV for all signals
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ
Terminator for RS-485: 120 Ω
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR (RS-232 only)
Baudrate: 50 bps to 921.6 kbps
info@moxa.com
Industrial Ethernet
Serial Signals
Power Consumption:
MGate 4101-MB-PBS: 340 mA @ 12 VDC, 130 mA @ 48 VDC
MGate 4101I-MB-PBS: 375 mA @ 12 VDC, 140 mA @ 48 VDC
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Standards and Certifications
Configuration Options: Serial Console, Windows Utility
Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Support: QuickLink, Paging
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 500 g
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Reliability
MTBF (mean time between failures): 513,139 hrs
Power Requirements
Warranty
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
140 (5.51)
149.25 (5.88)
Unit: mm (inch)
Rotary switches
PROFIBUS port
Reset to default button
Dual power inputs and relay output
Top View
Modbus serial port
4.3 (0.17)
Serial console
LED indicators
Front View
36 (1.42)
105.04 (4.14)
113.84 (4.48)
4
Industrial Ethernet Gateways > MGate™ 4101-MB-PBS Series
Safety: UL 60950-1, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D (Pending),
ATEX Zone 2 Ex nA nC IIC T3 Gc (Pending),
IECEx (Pending)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 1
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Software
DIN-rail
Side View
Rear View
Ordering Information
Available Models
MGate 4101-MB-PBS: 1-port Modbus-to-PROFIBUS slave gateway, 12-48 VDC, 0 to 60°C operating
temperature
MGate 4101I-MB-PBS: 1-port Modbus-to-PROFIBUS slave gateway with 2 kV isolation, 12-48 VDC,
0 to 60°C operating temperature
MGate 4101-MB-PBS-T: 1-port Modbus-to-PROFIBUS slave gateway, 12-48 VDC, -40 to 75°C
operating temperature
MGate 4101I-MB-PBS-T: 1-port Modbus-to-PROFIBUS slave gateway with 2 kV isolation, 12-48 VDC,
-40 to 75°C operating temperature
Package Checklist
• 1 MGate 4101-MB-PBS or 4101I-MB-PBS
Modbus-to-PROFIBUS slave gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
• RJ45 to DB9 cable (for console use)
Optional Accessories (can be purchased separately)
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
WK-36-02: Wall mounting kit
info@moxa.com
w w w. m o x a . c o m
4-17
Industrial Ethernet Gateways
MGate™ 5101-PBM-MN Series
1-port PROFIBUS-to-Modbus TCP gateways
››Protocol conversion between PROFIBUS and Modbus TCP
››Automatic scan of PROFIBUS devices for easy configuration
››Redundant dual DC power inputs and relay output supported
››Embedded data packet analyzer and diagnostic tool
››Web-based GUI for I/O data visualization
››-40 to 75°C wide operating temperature models available
4
Industrial Ethernet Gateways > MGate™ 5101-PBM-MN Series
Overview
The MGate 5101-PBM-MN gateway provides a communication portal
between PROFIBUS devices (e.g. PROFIBUS drives or instruments)
and Modbus TCP hosts. All models are protected with a rugged
metallic casing, DIN-rail mountable, and offer optional built-in optical
isolation. The PROFIBUS and Ethernet status LED indicators are
provided for easy maintenance. The rugged design is suitable for
industrial applications such as oil/gas, power, process automation, and
factory automation.
Windows Utility for Easy Configuration and Traffic Monitoring
The MGate Manager utility provides a user friendly interface to make
configuration and operation as easy as possible. Moxa’s innovative
AutoScan function can automatically detect all connected PROFIBUS
slave devices and their available I/O modules to quickly complete
gateway configuration, after which an easy to read data mapping
table is created to assist in the configuration of Modbus TCP master
(e.g. SCADA, PLC) settings. In addition, users can configure import/
export maintenance functions, and use embedded monitoring tools
to maintain Modbus communication packets logs, which can used for
troubleshooting.
Various Maintenance Functions
The MGate 5101-PBM-MN provides Web console and Telnet console
for remote maintenance. Each also supports encryption commutation
functions such as HTTPS and SSH for preventing unauthorized access.
The log functions are provided in firmware such as connection event
of Modbus or PROFIBUS for maintenance. Users can monitor each
I/O data and review the log through the web console remotely. A
relay output alarm is provided for the power input status. It gives
maintenance engineers an additional tool for troubleshooting and
maintenance.
Redundant Power Inputs
The MGate 5101-PBM-MN has dual power inputs for greater reliability.
The power inputs allow simultaneous connections to two live DC
power sources to provide uninterrupted operation even if one power
source fails. The higher level of reliability makes these advanced
PROFIBUS master to Modbus TCP gateways ideal for demanding
industrial applications.
Specifications
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
4-18
w w w. m o x a . c o m
Modbus TCP
• Operation Modes: Modbus TCP Slave/Master
PROFIBUS Interface
Protocol: PROFIBUS DP-V1 Master
Number of Ports: 1
info@moxa.com
Industrial Ethernet
Power Requirements
Data Rate: 9600 bps to 12 Mbps
Connector: DB9 female
Isolation: 2 kV (built-in)
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption: 365 mA @ 12 VDC
Serial Signals (Serial Console)
Standards and Certifications
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Software
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 500 g
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Reliability
MTBF (mean time between failures): 540,026 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
140 (5.51)
149.25 (5.88)
Unit: mm (inch)
4
Industrial Ethernet Gateways > MGate™ 5101-PBM-MN Series
Safety: UL 60950-1, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D (Pending),
ATEX Zone 2 Ex nA nC IIC T3 Gc (Pending),
IECEx (Pending)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 1
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Configuration Options: Serial Console, Windows Utility, Web Console
(HTTP/HTTPS), Telnet/SSH Console
Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Support: AutoScan, MXview, SNMP (v1, v2, v3), Private MIB
5101-PBM-PN
Reset to default button
Top View
4.3 (0.17)
PROFIBUS port
Serial console
Dual power inputs and relay output
113.84 (4.48)
LED indicators
Front View
36 (1.42)
105.04 (4.14)
Ethernet
DIN-rail
Side View
Rear View
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
• 1 MGate 5101-PBM-MN PROFIBUS
master to Modbus TCP gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
MGate 5101-PBM-MN: 1-port PROFIBUS master to Modbus TCP gateway, 12-48 VDC, 0 to 60°C
operating temperature
MGate 5101-PBM-MN-T: 1-port PROFIBUS master to Modbus TCP gateway, 12-48 VDC, -40 to 75°C
operating temperature
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC / 176 to 264 VAC input by switch
WK-36-02: Wall mounting kit
info@moxa.com
w w w. m o x a . c o m
4-19
Industrial Ethernet Gateways
MGate™ 5102-PBM-PN Series
1-port PROFIBUS-to-PROFINET gateways
››Protocol conversion between PROFIBUS and PROFINET
››Automatic scan of PROFIBUS devices, and easy configuration
››microSD card for configuration backup
››Built-in Ethernet cascading for easy wiring
››Redundant dual DC power inputs and relay output supported
››Embedded I/O monitoring and diagnostic tools
››Web-based GUI for I/O data visualization
››-40 to 75°C wide operating temperature models available
4
Industrial Ethernet Gateways > MGate™ 5102-PBM-PN Series
Overview
The MGate 5102-PBM-PN gateway provides a communication portal
between PROFIBUS devices (e.g., PROFIBUS PLC or drive) and the
PROFINET host. All models are protected with a rugged metallic
casing, are DIN-rail mountable, and offer optional built-in optical
isolation. The PROFIBUS and Ethernet status LED indicators are
provided for easy maintenance. The rugged design is suitable for
industrial applications such as oil & gas, power, process automation,
and factory automation.
Easy Setup Tools
Both the Windows MGate Manager utility and web console support
the AutoScan function, which makes configuration and operation
easy. AutoScan automatically detects all connected PROFIBUS slave
devices and their available I/O modules, allowing you to configure
your gateways very quickly, and a data mapping table is provided.
Furthermore, one click is all that’s needed to export all PROFIBUS
I/O modules to a GSDML file to assist in the configuration of the
PROFINET controller (e.g., a Siemens PLC).
Various Maintenance Functions
The MGate 5102-PBM-PN provides a web console and Telnet
console for remote maintenance, with both consles supporting
encryption commutation functions such as HTTPS and SSH to
prevent unauthorized access. The status and changes in I/O data of
all PROFIBUS slaves can be monitored remotely via the web console,
and users can also review the log from the web console to see which
system events have occurred. A relay output alarm is provided for the
power input and Ethernet cable status. These functions make it easy
for maintenance engineers to troubleshoot and maintain devices.
Redundant Power Inputs
The MGate 5102-PBM-PN has dual power inputs for greater reliability.
The power inputs allow simultaneous connections to two live DC
power sources to provide uninterrupted operation even if one power
source fails. The higher level of reliability makes these advanced
PROFIBUS master to PROFINET gateways ideal for demanding
industrial applications.
Specifications
Ethernet Interface
Protocol: PROFINET RT
Number of Ports: 2 (1 IP, Ethernet cascade)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
4-20
w w w. m o x a . c o m
PROFIBUS Interface
Protocol: PROFIBUS DP-V1 Master
Number of Ports: 1
Data Rate: 9600 bps to 12 Mbps
Connector: DB9 female
Isolation: 2 kV (built-in)
info@moxa.com
Industrial Ethernet
Power Requirements
Serial Signals (Serial Console)
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption: 430 mA @ 12 VDC
Connector: 8-pin RJ45
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Software
Configuration Options: Windows Utility, Serial Console, Web Console
(HTTP/HTTPS), Telnet/SSH Console
Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Support: AutoScan, MXview, SNMP (v1, v2, v3), Private MIB
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 500 g
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Sorage Card Slot: 1 microSD (SDHC) card slot supports up to 32 GB
Environmental Limits
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Safety: UL 508, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA nC IIC T3 Gc,
IECEx (Pending)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 3
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Reliability
MTBF (mean time between failures): 980,417 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
140 (5.51)
149.25 (5.88)
Reset to default
button
Dual power inputs
and relay output
microSD card
Top View
PROFIBUS port
Serial console
4.3 (0.17)
105.04 (4.14)
113.84 (4.48)
4
Industrial Ethernet Gateways > MGate™ 5102-PBM-PN Series
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Standards and Certifications
36 (1.42)
Ethernet
LED indicators
Front View
DIN-rail
Side View
Rear View
Ordering Information
Available Models
Package Checklist
Optional Accessories (can be purchased separately)
• 1 MGate 5102-PBM-PN PROFIBUSto-PROFINET gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
MGate 5102-PBM-PN: 1-port PROFIBUS-to-PROFINET gateway, 12-48 VDC, 0 to 60°C operating
temperature
MGate 5102-PBM-PN-T: 1-port PROFIBUS-to-PROFINET gateway, 12-48 VDC, -40 to 75°C operating
temperature
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
WK-36-02: Wall mounting kit
info@moxa.com
w w w. m o x a . c o m
4-21
Industrial Ethernet Gateways
MGate™ 5105-MB-EIP Series
1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways
››Support for both EtherNet/IP adapter and scanner
››Effortless configuration via web or Windows utility
››Complete packet analysis and diagnosis information for
maintenance
››Easy I/O data maintenance via web interface
››microSD card for configuration and system log backup
››-40 to 75°C wide operating temperature models available
››Modbus port with 2 kV built-in isolation protection
››Built-in Ethernet cascading for easy wiring
4
Industrial Ethernet Gateways > MGate™ 5105-MB-EIP Series
Overview
The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus
RTU/ASCII/TCP and EtherNet/IP network communication. To integrate
existing Modbus devices onto an EtherNet/IP network, use the
MGate 5105-MB-EIP as a Modbus master or slave to collect data and
exchange data with EtherNet/IP devices. The latest exchange data will
be stored in the gateway as well. The gateway converts stored Modbus
data into EtherNet/IP packets so the EtherNet/IP scanner can control or
monitor Modbus devices.
Configuration Backup via microSD Card
The MGate 5105-MB-EIP is equipped with a microSD card slot. A
microSD card can be used to back up both the system configuration
and system log, and can be used to conveniently copy the same
configuration to several MGate 5105-MP-EIP units. The configuration
file stored in the microSD card will be copied to the MGate itself when
the system is rebooted.
Effortless Configuration and Troubleshooting via Web Console
The MGate 5105-MB-EIP also provides a web console to make
configuration easy without having to install an extra utility. Simply log
in as an administrator to access all settings, or as a general user with
read-only permission. Besides configuring basic protocol settings, you
can use the web console to monitor I/O data values and transfers. In
particular, I/O Data Mapping shows data addresses for both protocols
in the gateway’s memory and I/O Data View allows you to track data
values for online nodes. Moreover, diagnostics and communication
analysis for each protocol can also provide helpful information for
troubleshooting.
Redundant Power Inputs
The MGate 5105-MB-EIP has dual power inputs for greater reliability.
The power inputs allow simultaneous connections to two live DC
power sources, so that continuous operation is provided even if one
power source fails. The higher level of reliability makes these advanced
Modbus-to-EtherNet/IP gateways ideal for demanding industrial
applications.
Specifications
Ethernet Interface
Protocol: EtherNet/IP, Modbus TCP
Number of Ports: 2 (1 IP, Ethernet cascade)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
EtherNet/IP
• Class: Adapter, Scanner
• CIP Objects Supported: Identity, Message Router, Assembly,
Connection Manager, TCP/IP interface, Ethernet link, Port
• Max. Number of Connections:
MGate as Adapter: 16 connections for read-only, 1 connection for
read/write
MGate as Scanner: 100 connections
4-22
w w w. m o x a . c o m
• Max. Total I/O Data Size:
Input: 2048 bytes (496 bytes per connection)
Output: 2048 bytes (496 bytes per connection)
Modbus
• Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
• Max. Number of Commands: 100
• Max. Number of Connections:
MGate as Modbus TCP Master: 32 connections
MGate as Modbus TCP Slave: 16 connections
• Max. Total I/O Data Size:
Input: 2048 bytes
Output: 2048 bytes
info@moxa.com
Industrial Ethernet
Serial Interface
Environmental Limits
Protocol: Modbus RTU/ASCII
Number of Ports: 1
Serial Standards: RS-232/422/485, software selectable
Connectors: DB9 male
Isolation: 2 kV (built-in)
RS-485 Data Direction Control: ADDC® (automatic data direction
control)
Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ
Terminator for RS-485: 120 Ω
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, RTS Toggle
Baudrate: 50 bps to 921.6 kbps
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Power Requirements
Input Voltage: 12 to 48 VDC
Power Connector: Terminal block
Power Consumption:
455 mA @ 12 VDC, 125 mA @ 48 VDC
Standards and Certifications
Serial Signals
Software
Operation Modes: EtherNet/IP Adaptor/Scanner, Modbus RTU/ASCII/
TCP Master/Slave
Configuration Options: Web Console, Windows Utility, Serial Console
Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
Support: MXview, SNMP (v1, v2, v3), Private MIB
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 507 g
Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Storage Card Slot: 1 microSD (SDHC) card slot supports up to 32 GB
Reliability
MTBF (mean time between failures): 513,139 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
140 (5.51)
149.25 (5.88)
Unit: mm (inch)
4
Industrial Ethernet Gateways > MGate™ 5105-MB-EIP Series
Safety: UL 508, EN 60950-1
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA nC IIC T3 Gc,
IECEx (Pending)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 3
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Reset to default
button
microSD card
Dual power inputs
and relay output
Top View
4.3 (0.17)
MODBUS port Ethernet
Serial console
LED indicators
Front View
105.04 (4.14)
113.84 (4.48)
36 (1.42)
DIN-rail
Side View
Rear View
Ordering Information
Available Models
MGate 5105-MB-EIP: 1-port Modbus-to-EtherNet/IP gateway, 0 to 60°C operating temperature
MGate 5105-MB-EIP-T: 1-port Modbus-to-EtherNet/IP gateway, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
WK-36-02: Wall mounting kit
info@moxa.com
Package Checklist
• 1 MGate 5105-MB-EIP Modbus-toEtherNet/IP gateway
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
• RJ45 to DB9 cable (for console use)
w w w. m o x a . c o m
4-23
Industrial Ethernet Gateways
MGate™ 5106-DNMB-GSM/
5207-DNMB-HSPA Series
1 and 2-port Modbus and DNP3 to cellular VPN gateways
››Retrieve Modbus/DNP3 serial data through cellular networks
››Dual SIM card slots for communication redundancy
››VPN tunnel function to secure data transmission
››Advanced power management to meet restricted outdoor
environment requirements
››microSD card for configuration backup
››-40 to 75°C wide operating temperature models available
››2 digital inputs and 2 digital outputs
4
Industrial Ethernet Gateways > MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series
Overview
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway
provides a communication portal between remote Modbus/DNP3
devices and the central SCADA system through cellular networks. Each
model has a rugged metallic casing, DIN-rail mounting, and optional
built-in optical isolation. To secure data transmissions, the MGate
Advanced Power Management
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway can
be used to retrieve data from remote Modbus/DNP3 devices. However,
supporting remote cellular communications also requires cellular
gateways to consume additional power. For instance, cellular gateways
deployed at remote sites may only have a battery to store solar power,
resulting in a very limited power supply. So in order to conserve as
much power as possible, the MGate 5106-DNMB-GSM/5207-DNMBHSPA series gateway can automatically turn off unused components
and run on very low power if there is no cellular transmission in
progress. This advanced power management system makes the MGate
5106-DNMB-GSM/5207-DNMB-HSPA ideal for remote device access.
Robust Maintenance Functions
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway can
be easily configured by web console or Telnet console for remote
maintenance. Each model also supports encryption commutation,
such as HTTPS and SSH, to prevent security issues. In addition, log
functions, such as Modbus/DNP3 and cellular connection events,
are provided in the firmware to make maintenance easier. Moreover,
users can remotely review log data through the web console when
connection is lost.
Specifications
Ethernet Interface
Protocol: Modbus TCP, DNP3
Number of Ports:
1 for MGate 5106-DNMB-GSM,
2 (1 IP, Ethernet cascade) for MGate 5207-DNMB-HSPA
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
Serial Interface
Protocol: Modbus RTU/ASCII Master/Slave, DNP3 serial
Number of Ports:
1 for MGate 5106-DNMB-GSM,
2 for MGate 5207-DNMB-HSPA
Serial Standards: RS-232/422/485, software selectable
Connectors: DB9 male
4-24
5106-DNMB-GSM/5207-DNMB-HSPA series gateway also provides
a VPN tunnel function. Morever, the rugged design is particularly
suited for industrial applications, such as oil and gas, power, process
automation, and factory automation.
w w w. m o x a . c o m
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, RTS Toggle
Baudrate: 50 to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Wireless Network
MGate 5106-DNMB-GSM: 2.5 G
GSM/GPRS: 850/900/1800/1900 MHz
Class: GPRS 10
info@moxa.com
Industrial Ethernet
Environmental Limits
MGate 5207-DNMB-HSPA: 3.75 G
GSM/GPRS/EDGE: 850/900/1800/1900 MHz,
UMTS/HSPA: 850/900/1700/1900/2100 MHz,
AWS: 1700/2100 MHz
Class: GSM: 4 (850/900), 1 (1800/1900), EDGE: E2, WCDMA: 3
Number of SIM Card Slots:
1 for MGate 5106-DNMB-GSM,
2 for MGate 5207-DNMB-HSPA
Number of Antennas:
1 for MGate 5106-DNMB-GSM,
2 for MGate 5207-DNMB-HSPA
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m (795 hPa), higher altitudes on demand
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
Power Requirements
Input Voltage: 9 to 60 VDC
Power Connector: Terminal block
Power Consumption: 397 mA @ 9 VDC, 70 mA @ 60 VDC
Power Saving Mode: 40 mA @ 9 VDC
Digital Input/Output
Standards and Certifications
Software
Security
• VPN: IPSec, PPTP, L2TP, Port Forwarding, IP Filter
• Access Controls: IP address and phone number block list
Configuration
• Protocols: UDP/TCP, SNTP, ICMP, DDNS, DHCP, PPP, DNS, HTTP/
HTTPS, Telnet, SSH, SNMP, ARP
• Configuration Options: Web (HTTP/HTTPS) console,
Telnet/SSH console, Windows utility
• Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server
2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
• Configuration Backup: microSD card (SDHC supported),
import/export function supported for MGate 5207-DNMB-HSPA
• Support: MXview, SNMP (v1, v2, v3), Private MIB
Physical Characteristics
Safety: UL 508, EN 60950-1
Hazardous Location: Class 1 Division 2, ATEX Zone 2 (pending)
EMC: CE, FCC
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 3
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Radio:
MGate 5106-DNMB-GSM: FCC Part 22H, FCC Part 24E, EN 301489-1,
EN 301489-7, EN 301511
MGate 5207-DNMB-HSPA: FCC Part 22H, FCC Part 24E, EN 301489-1,
EN 301489-24, EN 301908-1
Reliability
Alarm Functions: SMS, digital output, e-mail
Alert Tools: Built-in buzzer
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Housing: Metal, IP30 protection
Weight:
532 g for MGate 5106-DNMB-GSM,
620 g for MGate 5207-DNMB-HSPA
Dimensions: 45.8 x 134.8 x 105 mm (1.8 x 5.31 x 4.13 in)
Storage Card Slot: 1 microSD (SDHC) card slot supports up to 32 GB
for MGate 5207-DNMB-HSPA
info@moxa.com
w w w. m o x a . c o m
4
Industrial Ethernet Gateways > MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series
Number of DI/DO:
1 DI and 1 DO for MGate 5106-DNMB-GSM
2 DI and 2 DO for MGate 5207-DNMB-HSPA
Connectors:
4-pin terminal block for MGate 5106-DNMB-GSM
6-pin terminal block for MGate 5207-DNMB-HSPA
Dry Contact Level:
Logic 0: Short to GND
Logic 1: Open
Wet Contact Level (COM to DI):
Logic 0: +10~30 VDC
Logic 1: 0~+3 VDC
Digital Output (Sink Type):
Driver Current: Max. 200 mA per channel
On-state voltage: Max. 30 VDC
4-25
Industrial Ethernet Gateways
Dimensions
Unit: mm (inch)
8.2
MGate™
MGate™
5106-DNMB-GSM 5207-DNMB-HSPA
MGate™
MGate™
5106-DNMB-GSM 5207-DNMB-HSPA
PWR Ready
PWR Ready
P1 SIM
P1 P2
SIM1 SIM2
RF
10M
100M
100M
Ethernet
Ethernet2
10M Ethernet1 100M
10M
134.8
COM DI GND DO
P1
P1
P2
4
5207-DNMB-HSPA
5106-DNMB-GSM
Industrial Ethernet Gateways > MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series
4-26
COM DI0 DI1 GND DO0 DO1
Ø10
RF
45.8
8.6
Top View
Front View
105
8.8
Side View
Rear View
Ordering Information
Available Models
MGate 5106-DNMB-GSM: 1-port Modbus/DNP3.0 to GSM cellular gateway, 0 to 60°C operating temperature
MGate 5106-DNMB-GSM-T: 1-port Modbus/DNP3.0 to GSM cellular gateway, -40 to 75°C operating temperature
MGate 5207-DNMB-HSPA: 1-port Modbus/DNP3.0 to HSPA cellular gateway, 0 to 60°C operating temperature
MGate 5207-DNMB-HSPA-T: 1-port Modbus/DNP3.0 to HSPA cellular gateway, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
Package Checklist
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
• 1 MGate 5106-DNMB-GSM or
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
MGate 5207-DNMB-HSPA
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC input
• Documentation and software CD
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
• Quick installation guide (printed)
WK-51-01: Wall mounting kit
• Warranty card
ANT-CQB-AHSM-00-3m: Quad-band GSM/GPRS, omni-directional, 0 dBi, 10 cm high
ANT-CQB-AHSM-03-3m: Quad-band GSM/GPRS, omni-directional, 3 dBi, 25 cm high
ANT-CQB-AHSM-05-3m: Quad-band GSM/GPRS, omni-directional, 5 dBi, 37 cm high
ANT-WCDMA-AHSM-04-2.5M: Five-band GSM/GPRS/UMTS/HSDPA/HSPA+, omni-directional, 4 dBi, 11 cm high
ANT-WCDMA-ANF-00: Five-band GSM/GPRS/UMTS/HSDPA/HSPA+, omni-directional, 0 dBi, glass fiber, N-type (female)
CRF-SMA(M)/N(M)-300: CFD200 cable, SMA male to N-type (male), 3 m
w w w. m o x a . c o m
info@moxa.com
Download PDF