Strong SRT 4663X User manual

Contents
1. Introduction
1.1 Overview
1.2 Main Features
2
2. Safety/Precautions
2.1 Safety
2.2 Precautions
3
3. Points to Check before Use
3.1 Accessories
5
4. Controls/Functions
4.1 Front Panel
4.2 Rear Panel
4.3 Remote Controller
6
5. How to Connect
10
6. Operation
6.1 Getting Started
6.2 System Setting
6.3 Channels
6.4 Electronic Program Guide
6.5 Games
6.6 USB Menu
6.7 System Information
6.8 Conditional Access System
6.9 PVR
11
7. Troubleshooting
46
8. Specifications
47
1
Introduction
Safety/Precautions
1.1 Overview
2.1 Safety
This satellite receiver is designed for the reception of free-to-air. Depending on your
location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range
of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with
highly qualified electronic parts.
Be sure to read this user's manual
before starting the operation of the unit.
Do not touch the power cord with wet
hands as it may cause electric shock.
Never open the cover. It is very
dangerous to touch the inside of the
unit due to possible electric shock.
Place the unit in a well ventilated and
no-heat environment.
When you do not use this unit for a
long time, make sure that the power
cord is pulled out from the outlet. Also
do not use a damaged power cord as it
may cause fire or electric shock.
A professional installation is required.
If reception is interrupted, contact your
local service centre.
1.2 Main Features
Ȟ Embedded CONAX CAS7
Ȟ MPEG-II digital & fully DVB compliant
Ȟ On-Screen Display (OSD) with a 256-colors color resolution
Ȟ DiSEqC control version 1.0, 1.1, 1.2 and USALS compatible
Ȟ 16 renameable favorite channel groups
Ȟ Powerful channel control by Favorites, Lock, Skip, Move and Delete
Ȟ Channel sorting by Alphabet, Transponder and Conditional Access System (CAS)
Ȟ Multilingual language OSD & menu : English, Italian, Turkish, Arabic, Parsi, German, French,
Russian, Spanish, Portuguese
Ȟ Extended Electronic Program Guide (EPG) and program reservation through EPG
Ȟ Teletext by OSD/VBI (Vertical Blanking Interval)
Ȟ Last channel memory function
Ȟ Total of 10,000 programmable channels
Ȟ Advanced ‘Channel List’ menu
Ȟ Multi-satellite search
Ȟ Games with stereo sound
Ȟ Software & channels database upgrades via RS-232C: PC to STB/STB to STB
Ȟ Parental Lock/ Installation Lock / Receiver Lock / Channel Lock / Lock Channel Confirm.
Ȟ Digital audio output [S/PDIF]
Ȟ Multi-picture display
Ȟ Zoom capabilities
Ȟ Advanced Blind Search Function
Ȟ Color Adjustment Function
Ȟ USB Interface
Ȟ Component output(Y/Pb/Pr)
Ȟ USB2.0 PVR Ready via external HDD with Timeshift, Record & Playback functions
Ȟ High speed software upgrade via USB 2.0
Ȟ MP3 player and JPEG viewer
DiSEqC is a trademark of EUTELSAT
2
3
2.2 Precautions
Points to Check before Use
When installing the unit
3.1 Accessories
Install the unit horizontally. An uneven
installation may cause the unit to be
damaged.
Do not put heavy items such as a TV
set on the unit. That may damage the
unit.
The accessories below are included with this receiver:
Remote control : 1
User's manual : 1
er's
Us
Do not leave the unit where the water
drops or splashes.
Do not put water holding items such as
vases on the unit.
al
nu
ma
Batteries (AAA type) : 2
RCA Cable : 1
Adapter : 1
Component Cable : 1
Moving the unit to a hot area from a
cold one will cause condensation.
Do not operate the unit for one or two
hours or until it has dried completely.
Do not install the unit:
ҮWhere it is subject to vibrations
ҮWhere it is exposed to direct sunlight
ҮWhere there is humidity
ҮWhere the temperature is too high or too low.
ҮWhere there is no ventilation
Ȟ If any of the above-listed accessories is missing, contact your sales
representative.
3.2 The Satellite dish
Your dish should be properly installed and azimuth and elevation must be precisely set up.
Ȟ The mains plug is used as the disconnect device.
The disconnect device shall remain readily operable.
4
Ȟ This unit supports DiSEqC 1.2 and can work with a compatible antenna positioner.
Ask your dealer for information.
5
4.2 Rear Panel
Controls/Functions
4.1 Front Panel
3
6
1
3
5
2
4
6
2
4
7
11
7
No. Name
1
8
5
9
10
12
Connector
Function
1
LNB INPUT
IEC 169-24 FEMALE
IF input from LNB to digital tuner
2
LOOP OUT
IEC 169-24 FEMALE
IF loop-through output from digital tuner
3
AUDIO L
RCA cinch
Left audio output
4
AUDIO R
RCA cinch
Right audio output
5
VIDEO
RCA cinch
Composite video output
6
S/PDIF
RCA cinch
Digital audio output
7
Y
RCA cinch
Component video output (Y)
8
Pb
RCA cinch
Component video output (Pb)
9
Pr
RCA cinch
Component video output (Pr)
10 RS-232C
DB-9
Low speed serial port
11 RF OUT UHF 21-69
IEC 169-2 MALE
Output to TV
12 TV ANT IN
IEC 169-2 FEMALE
Input from terrestrial antenna
1 Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and
shows no light in ‘Power ON’ mode.
2 Indication Light : Flashes when a key on the Remote Control Unit (RCU) is
pressed.
3 Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
4 - 5 CH. Ɗ/ƌ : To switch channels or change the cursor position on the
application screen.
6 USB : To connect USB devices such as Memory stick or external Hard Disk Drive.
7 Smart Card Reader(Option) : Insert smart card for encrypted channel access.
6
7
4.3 Remote controller
4.3 Remote controller
19 RECALL(RED) : To move to the previous
1 POWER : To turn the receiver On/Off.
channel. Used for special functions in
menu mode.
2 MUTE : To turn the sound On/Off.
3 Numeric Keys (0-9) : To enter numerical
1
settings (such as channel numbers)
directly.
2
20 AUDIO(GREEN) : To show the Multi-
language audio track, the stereo-mono
mode. Used for special functions in menu
mode.
4 INFO : To show information about the
current program. Press twice to show
detail.
3
17
6
8
12
14
16
7
21 TEXT(YELLOW) : To show the teletext
5 PAUSE : To pause the video. Press
18
contents if teletext is transmitted. Used
for special functions in menu mode.
again to resume the video.
4
6 EPG : To show the TV/Radio program
22 BLUE : To display multiple pictures.
guide.
9
23 COLOR : To control the brightness,
7 GROUP : To change the channel
15
10
groups(Satellites or favorite groups).
8 MENU : To enter or exit the main menu.
5
9 EXIT : To exit from the present menu and
13
move to the previous menu.
11
10 - 11 Double arrow UP/DOWN : To move
to the next or previous page when
many pages are available.
12 - 13 Up & Down : To switch channels in
non-menu mode and move the
cursor up/down in menu mode.
14 - 15 Left & Right : To change the volume
level in non-menu mode and modify
a setting in menu mode.
16 OK : To show the Channel List in nonmenu mode and select an item or confirm
in menu mode.
17 TV/RADIO : To switch between TV and
Radio.
18 TV/SAT : To switch the TV output source
between the satellite input and the
UHF/VHF antenna input.
8
contrast and color of a picture.
24 ZOOM : To zoom in the screen picture.
23
19
20
25
28
29
31
Press the ZOOM button and select a
screen section, then press the OK button.
(You can zoom in by 3 times)
24
22
21
25 RWD : Playback in rewind mode.
27
26 ADVANCE : Go to live channel.
26
27 FWD : Playback in forward mode.
30
33
28 REC : Start recording.
32
29 PLAY : Play Content.
30 STOP : Stop Playback.
31 FILELIST : To display the filelist.
32 BOOKMARK : To mark a specific place
in a file for later retrieval.
33 SLEEP : To set the STB off after minutes.
9
How to Connect
Operation
1 Connect the TV antenna to TV ANT IN
2 Connect the RF-IN of the TV to RF-OUT
6.1 Getting Started
After your receiver is powered on, proceed with installation as follows :
3 When available, you may instead connect the video and audio of the TV to
video and audio: Connect the red and white connectors to Audio R and
Audio L, and the yellow connector to video
4 When available, you may instead connect the Component Video of your TV to
Component Video for best quality: connect the Y, Pb and Pr of your TV to
Y,Pb and Pr respectively
1) Menu Language Setting
͈ Turn on your TV and receiver.
͉ The pop-up menu for language selection will appear.<Figure 6.1.1>
Select one language and press
to proceed.
5 Connect your satellite dish
<Figure 6.1.1>
10
11
6.1 Getting Started
6.1 Getting Started
(When the DiSEqC Motor parameter is set as 1.2)
2) Antenna Setup
͈ Press the MENU button to display the main menu.
- Hemisphere : Select between the Northern/Southern.
͉ Use
- Move : You can move the dish to the West/East.
CH
/
CH
and
VOL
/
VOL
to move in the menu.
͊ Press
on ‘Dish Setting’. The following window will appear. <Figure 6.1.2>
If you have a motorized dish, press
on ‘Motorized Setting’. <Figure 6.1.3>
ҫ Note : Enter a 4-Digit password if need arise. The default password is ‘0000’.
- Limit : If you want to set limits, press
.
- Disable Limit : You can disable the East and West limits.
- Goto Center : Move the dish to the initial 0 position.
- Set East / West Limit : Move the dish East or West using
Press
to set East or West limit.
VOL
/ .
VOL
(When the DiSEqC Motor parameter is set as USALS)
- Sat Degree : Satellite location.
- Antenna Position : Press
.
- Goto Reference : Move the dish to the reference 0 position.
- Antenna Longitude : Your longitude at present.
<Figure 6.1.2>
<Figure 6.1.3>
͋ Select the item that you want to edit, and set its parameters as desired. <Dish Setting>
- LNB Power : Select among ON/OFF/13V/18V.
- LNB Type : Select among Single/Universal/OCS.
- LNB Freq : Set the frequency of the LNB oscillator.
- 22KHz : When not AUTO, set the signal path from LNB or switch by selecting a control
signal among 0/22KHz.
- DiSEqC switch : Select DiSEqC protocol among OFF/1.0/1.1 as appropriate for your
configuration.
- Committed/Uncommitted : Select the DiSEqC port.
- Antenna Latitude : Your latitude at present.
ҫ Note : You need to know what LNB you are using to correctly set the L.O. (local
oscillator) frequency.
ҫ Note : You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
͍ When you are done, press the EXIT button.
͌ Select the item that you want to edit and set its parameters as desired. <Motorized Setting>
- Frequency : If the default TP frequency is not appropriate, you can select another TP
frequency at which to check for signal.
- DiSEqC Motor : Select DiSEqC protocol among OFF/1.2/USALS as appropriate for your
Motor.
12
13
6.1 Getting Started
6.1 Getting Started
Ȟ Manual Scan <Figure 6.1.7>
3) Satellite Scan
Through this function, the receiver searches for all the available channels and saves them in
memory. Chose Auto Scan to search using transponders (frequencies) in memory, or chose
Blind Scan to look for new satellite/transponders.
͈ Select a transponder.
Ȟ Auto Scan <Figure 6.1.4>
͊ To change a transponder's polarization, use the
͈ Press
on the names of the satellites that you want to scan under ‘Satellite List’.
You can select more than one satellite.
͉ Press
VOL
and set the ‘Search Type’ and ‘Network Search’ parameters.
- Search Type : Decide for which channels to search (All channels/ Free channels only/
TV channels only).
͉ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
VOL
or
VOL
keys.
͋ To add a new transponder, press the GREEN button.
͌ To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
͍ To search a transponder, set its different parameters and press
.
- Network Search : Set ON to find more transponders (frequencies) through a Network
Information Table (NIT) scan. That is, when the broadcaster is
sending a NIT through a given transponder, the receiver will also scan
for transponders listed in the NIT and not otherwise recognized.
(this can happen when a transponder is new)
͊ Press
under ‘SCAN’ to scan the selected satellites. <Figure 6.1.5>
<Figure 6.1.6>
<Figure 6.1.7>
Ȟ Package Identifier (PID) Scan <Figure 6.1.8>
͈ Select a transponder.
͉ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
<Figure 6.1.4>
<Figure 6.1.5>
͈ Select the satellites you want to search by pressing the
button on the remote.
/
to set the “Polarization” and “Scan Mode” options.
- Polarization : Select Vertical / Horizontal / All.
- Scan Mode : Select Fast / Detail.
- SCAN : Begin channel search of the selected satellites.
VOL
CH
VOL
or
VOL
keys.
͋ To add a new transponder, press the GREEN button.
Ȟ Blind Scan <Figure 6.1.6>
͉ Press
͊ To change a transponder's polarization, use the
CH
͌ To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
͍ To search a transponder, set its different parameters and press
/
. You can search
a specific channel of the transponder by setting its PID data (Video, Audio and PCR).
CH
ҫ Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
͊ Press the RED button on the remote to begin a blind scan of all ‘selected’ satellites.
14
CH
15
6.1 Getting Started
6.1 Getting Started
4) Channel Selection
You can use
CH
/
CH
to navigate between channels until you find the channel you want.
Ȟ If you know the channel number, you can enter it with the NUMERIC buttons and wait 2
seconds until the channel is changed.
Ȟ If you know the channel name or transponder or CAS, you can press
channel list <Figure 6.1.10>
to display the
<Figure 6.1.8>
Ȟ OTA Menu <Figure 6.1.9>
You can download the latest software via satellite using the OTA (Over the Air) menu.
ҫ Note : OTA information is subject to change by the manufacturer with or without
notice.
͈ Press
VOL
or
VOL
to select a Scan mode:
- Default : Default satellite and transponder information is used for OTA download.
- User : Use this mode if OTA download fails in default mode and/or you wish to add or
edit satellite and transponder information. Please contact your local dealer or
provider for more information.
͉ Press the RED button to start OTA download.
ҫ Note : Be careful! Please do not power off during OTA download.
Once OTA download is complete, your satellite receiver will be reboot
automatically.
<Figure 6.1.10>
͈ In the right side of screen, detailed information about the selected channel will be
displayed. (Satellite Name, Frequency(Polar) and Channel Name)
͉ You can use the following buttons to navigate between channels:
-
/
CH
VOL
/
VOL
CH
: Moves one channel up/ down.
: Moves one page up / one page down.
- RED : Shows all channels in the current group.
- GREEN : Shows all channels sorted alphabetically.
- YELLOW : Shows all channels sorted by Transponder.
- BLUE : Shows all channels sorted by CAS system.
͊ Press
when the selection bar is positioned on the desired channel.
<Figure 6.1.9>
16
17
6.1 Getting Started
6.1 Getting Started
5) Other Functions of the Remote Control
Ȟ Volume Control
͈ While watching a program, press
VOL
or
VOL
to control the volume.
͉ You can press the MUTE button to remove the sound of the program: the mute icon will be
displayed. Press the MUTE button again to turn the sound back on.
Ȟ PAUSE
You can press this key to pause the video. Press it again to resume the video. When video is
paused, you can zoom in sections of it.
͈ Select a section using
͉ Press
CH
/
to zoom in. Press
CH
/
VOL
/
VOL
.
again to zoom out.
Ȟ GROUP
Ȟ Channel Information
͈ You can press the INFO button to display the information banner for a few seconds.
͉ If you then press the INFO button again, a detailed banner will be displayed.
Ȟ TV/ SAT switching
You can press TV/SAT to select the source of the signal to receive:
- TV Mode : Signal from TV ANT INPUT will be out. (Front will display ‘TV’)
- SAT Mode : Signal from Satellite will be out. (Front will display the channel number)
When watching TV or listening to Radio, you can press this button to view the list of satellites
and/or favorite channel groups.
Only registered satellites and favorite groups are displayed.
Ȟ Multi Picture Display <Figure 6.1.11>
You can press the BLUE button to display multiple pictures; you can choose the number of
pictures such as 1X2, 2X2, 2X3 or 3X3.
Ȟ SLEEP <Figure 6.1.12>
Ȟ TV/ RADIO switching
You can press this key to change from a TV channel to a Radio channel or vice versa.
Ȟ RECALL(RED)
You can set the your receiver to turn off after a few minutes. Press SLEEP button to set the
sleep timer.
- To cancel the sleep timer, please press until you set time as “0 min”.
(0-Disable, 10, 20, 30, 60, 90, 120 Minutes)
Press to return to the previous channel.
Ȟ Subtitle / Audio (GREEN)
Press to adjust the subtitle and/or audio status of the current channel:
- Audio Mode : Select between, Stereo ƍ Mono-Left ƍ Mono-Right
- Audio Track : Select between tracks available in this program
ҫ Note : These subtitle and audio parameters are workable only when the desired
channel supports these functions.
<Figure 6.1.11>
<Figure 6.1.12>
Ȟ Teletext (YELLOW)
The Teletext service is a text data service sometimes available from the Service Provider.
18
19
6.2 System Setting
6.2 System Setting
1) Time Settings
2) A/V Output Settings
This submenu allows you to set your local time, wake up time, wake up channel and sleep time.
<Figure 6.2.1>
- GMT Usage : Set this ON for the local time to be determined by adjusting the time difference
with the GMT (Greenwich Meantime) according to your location.
- Current Date : If GMT Usage is OFF, you can modify the date by pressing
.
- Current Time : If GMT Usage is OFF, you can modify the time using the NUMERIC buttons.
- Local Offset : If GMT Usage is ON, Local time is GMT time + Local Offset.
- Wake Up Mode : Select the wake up frequency. (Off/Once/Daily)
- Wake Up Time : Set the wake up time using the NUMERIC buttons.
- Wake Up Channel : Press
to set the wake up channel.
- Sleep Mode : Select the Sleep frequency. (Off/Once/Daily)
- Sleep Time : Set the sleep time using the NUMERIC buttons.
This submenu allows you to specify the audio/video output. <Figure 6.2.2>
- Audio Language : Set the default audio language when selecting a channel.
- Subtitle Language : Set the default subtitle language.
- Video Format : Select the video output format. (AUTO/PAL/NTSC)
- Screen Format : Select the TV aspect ratio. (16:9 / 4:3)
- Display Format : Select the video display aspect ratio. (Letter-Box / Pan Scan / Full Screen /
Pillar-Box)
- RF Type : If the Video Format is set to PAL, select among supported PAL standards. (PAL
B/G, PAL I, PAL D/K).
- RF Channel : Set the RF channel to which to display the audio and video signals on your TV
set (21 to 69) ; if you select 40, they will be displayed at channel 40 on your TV
set.
- SPDIF : Set this ON to enable digital audio output.
<Figure 6.2.1>
<Figure 6.2.2>
3) OSD Settings
This submenu allows you to set the menu language, OSD transparency and Information and
Volume timeouts. <Figure 6.2.3>
- Menu Language : Select the desired language for the menu.
- Transparency : Set the OSD transparency of the menu. (1% ~ 100%)
- Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or 10
seconds)
- Volume Timeout : Select the display duration of the volume box. (1, 2, 3, 5 or 10 seconds)
20
21
6.2 System Setting
6.2 System Setting
<Figure 6.2.4>
<Figure 6.2.3>
5) Database Reset
4) Security Settings
This submenu allows you to set password options and to lock or unlock access to menus (Note:
PIN code and password are the same). <Figure 6.2.4>
- Receiver Lock : Set ON to require entering a PIN code at powering on.
- Install Lock : Set ON to require entering a PIN code to access the installation menu.
- Channel Lock : Set ON to require entering a PIN code to access the channels menu.
- Lock Channel Confirm : Set ON to require entering a PIN code to access a locked channel.
This submenu allows you to restore the factory set values (useful when encountering problems
after changing settings). <Figure 6.2.5>
- Delete Radio Channels : Erase all radio channels in the database.
- Delete Scramble Channels : Erase all scramble channels in the database.
- Delete All Channels : Erase all channels.
- Factory Set : Erase all channels and restore the factory default settings.
- Age Limit : Set to prevent children or unauthorized people from watching programs. Select
among (Block All / Block G & Above / Block PG & Above / Block M & Above /
Block MA & Above / Block AV & Above / Block R & Above). When program
information (age limit) is available from broadcaster and this age limit exceeds
the selection, a PIN code is required to access the channel/program.
- Current Password : To change your password, first enter your current password.
- New Password : Enter the new password that you want to set.
- Verify Password : Enter the new password again for confirmation.
ҫ Note : The default password is ‘0000’.
22
<Figure 6.2.5>
23
6.2 System Setting
6.3 Channels
6) Calculator
1) Set Favorites
This submenu allows you to use a calculator on the screen. <Figure 6.2.6>
- You can switch between Hex (Hexadecimal) and Dec (Decimal) basis for arithmetic with the
RED button of the remote control unit.
This submenu allows you to set up favorite groups of channels. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. The receiver supports 16
favorite groups.
- Use the Numerical and the
͈ Press
VOL
/
VOL
/
buttons on the remote control unit.
on ‘Set Favorites’. The list of groups will be displayed. <Figure 6.3.1>
͉ Press
/
and
to choose a group. The following menu will be displayed.
<Figure 6.3.2>
If you want to change the name of a favorite group, press the RED button.
CH
CH
͊ Press
to add (or remove if previously added) the selected channel to/from the favorite
channel group.
͋ Press the EXIT button to return to the previous menu.
<Figure 6.2.6>
7) Data Transfer
This submenu allows you to transfer the software from a receiver to another receiver. You can
select and transfer Firmware/ Channel Data/ Games. <Figure 6.2.7>
<Figure 6.3.1>
<Figure 6.3.2>
- Firmware : Transfer the firmware of a receiver to another receiver.
- Channel Data : Transfer the channel data of a receiver to another receiver.
2) Edit Channels
This submenu allows you to rename channels and input user PID. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list
group by pressing the GROUP button.
͈ Press
on ‘Edit Channels’. The following menu will be displayed. <Figure 6.3.3>
͉ Press
on the channel that you want to edit.
͊ Press
on ‘Edit Name’ to rename the channel; the keypad will be displayed.
͋ Similarly, you can edit the PID data using the NUMERIC keys.
<Figure 6.2.7>
24
ҫ Note : The VIDEO PID, AUDIO PID and PCR PID are very important for optimal
satellite signal reception. We recommend you get professional advice where
available.
25
6.3 Channels
6.3 Channels
4) Lock Channels
This submenu allows you to lock channels to control access to them. Once a channel is locked,
you will be asked to enter a password whenever you try to watch it. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list
group by pressing the GROUP button.
ҫ If you set ‘Lock Channel Confirm’ (refer to <6.2>security setting) to OFF, you will not
be asked to enter a password even if the channel is locked.
͈ Press
<Figure 6.3.3>
on ‘Lock Channels’. The following menu will be displayed. <Figure 6.3.5>
͉ Press
on the channel that you want to lock/unlock; the lock icon will be
displayed/removed.
͊ Press the EXIT button to return to the previous menu.
3) Move Channels
This submenu allows you to move channels.
You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button.
You can choose a channel list group by pressing the GROUP button.
͈ Press
on ‘Move Channels’. The following menu will be displayed.<Figure 6.3.4>
͉ Press
on the channel that you want to move; a ‘move’ icon will be displayed.
͊ Use the
CH
͋ Press
again to place the channel.
/
CH
/
VOL
/
VOL
/ NUMERIC buttons to move the selected channel.
<Figure 6.3.5>
͌ Press the EXIT button to return to the previous menu.
<Figure 6.3.4>
26
27
6.3 Channels
6.3 Channels
5) Skip Channels
6) Delete Channels
This submenu allows you to skip channels. Once a channel is set to be skipped, it will be
whenever you navigate channels using
/
in non-menu mode. You can select TV or
Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a
channel list group by pressing the GROUP button.
CH
CH
ҫ Note : You can still access a ‘skipped’ channel if you enter its number using the
NUMERIC buttons in non-menu mode.
͈ Press
on ‘Skip Channels’. The following menu will be displayed.<Figure 6.3.6>
͉ Press
on the channel that you want to skip/un-skip; the skip icon will be displayed /
removed.
͊ Press the EXIT button to return to the previous menu.
This submenu allows you to delete channels. You can select TV or Radio channels in an
alternative way by pressing the TV/RADIO button. You can choose a channel list group by
pressing the GROUP button.
ҫ Note : Be careful! If you delete a channel, you will not be able to access it again until
you rescan.
͈ Press
on ‘Delete Channels’. The following menu will be displayed. <Figure 6.3.7>
͉ Press
on the channel that you want to set/unset for deletion; the delete icon will be
displayed/removed.
͊ Press the INFO button to delete all channels in the current list; you will be asked to enter your
password.
͋ Press the EXIT button to return to the previous menu and confirm deletion.
<Figure 6.3.6>
<Figure 6.3.7>
28
29
6.4 Electronic Program Guide
6.4 Electronic Program Guide
1) EPG
2) Timer
This submenu allows you to access the electronic program guide when available.
This sub menu allows you to set the on/off time of your receiver.
͈ Press the EPG button to display the guide menu. <Figure 6.4.1>
͈ This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6.4.2>
͉ Press
͊ Press
͋ Press
/
VOL
CH
VOL
/
to see the previous/next guide.
CH
/
/
to select another channel. <Figure 6.4.1>
to watch the selected channel and access its EPG data.
If you press
in the right side of the screen (Event display list).
- If the current time EPG is selected, you will return to the previous menu and get signal from
the selected channel.
- If a future time (next) EPG is selected, the selected program will be reserved and the event
color will change.
͌ You can select TV or Radio channels by pressing the TV/RADIO button
͍ You can choose a channel list group by pressing the GROUP button.
͎ You can access the timer menu by pressing the RED button. <Figure 6.4.2>
͉ Press
͊ Press
/
CH
VOL
/
VOL
CH
to select a timer’s parameter.
to change the parameter.
- Timer No : Select the timer that you want to modify. (1- 8)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press
to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press
to display a Channel list pop-up; Select a channel
- Record : To record program. (off/on, This function is available when USB device is
connected)
- Power off : To your receiver power-off
<Figure 6.4.1>
30
<Figure 6.4.2>
31
6.5 Games
6.5 Games
͏ Press the EXIT button to quit the game.
1) Tetris
͈ Press
on ‘Tetris’. The following menu will be displayed. <Figure 6.5.1>
͉ You can choose a skill level using
͊ Press
menu.
͍ Press
/
.
CH
to start the game <Figure 6.5.2>, or press the EXIT button to return to the previous
͋ Press
͌ Press
CH
to rotate a block.
/
VOL
CH
VOL
to move a block.
to drop a block.
͎ You can see the next block in the top-right small window.
<Figure 6.5.3>
͏ Press the EXIT button to quit the game.
<Figure 6.5.4>
3) Snake
͈ Press
on ‘Snake’. The following menu will be displayed. <Figure 6.5.5>
͉ You can choose a skill level using
͊ Press
menu.
<Figure 6.5.1>
<Figure 6.5.2>
͋ Press
CH
/
CH
.
to start the game <Figure 6.5.6>, or press the EXIT button to return to the previous
CH
/
CH
/
VOL
/
VOL
to move.
͌ Pass through the BLUE icon to increase your score; the length of the snake increases.
͍ Pass through the RED icon to decrease the snake’s length.
2) Sokoban
How to play Sokoban: you have to push the balls to their correct positions. The balls can only be
pushed, never pulled, so you have to be careful not to push them into a corner where you can’t
get them out from. You can only push one ball at a time.
͈ Press
͏ Press the EXIT button to quit the game.
on ‘Sokoban’. The following menu will be displayed. <Figure 6.5.3>
͉ You can choose a skill level using
͊ Press
menu.
͋ Press
͎ Avoid the BLACK icons. If you hit a BLACK icon (block), the game ends.
CH
/
CH
.
to start the game <Figure 6.5.4>, or press the EXIT button to return to the previous
CH
/
CH
/
VOL
/
VOL
to move.
͌ Press the RED button to undo the previous move. You can undo only one step.
͍ Press the GREEN button to restart the game.
͎ Press the YELLOW/BLUE buttons to jump to the previous/ next level. You can jump only
between completed levels.
32
<Figure 6.5.5>
<Figure 6.5.6>
33
6.6 USB Menu
6.6 USB Menu
This submenu allows you to play various MP3 files, view JPG files or download a new software by
connecting your USB flash drive.
2) JPG menu
͈ Press
͉ Press
1) MP3 menu
͈ Select the MP3 file you want to play back by using
CH
/
CH
,
in the file list. <Figure 6.6.1>
͉ Press the EXIT button to hide the file list. You can then select an option using
<Figure 6.6.2>
͊ Move to the volume control bar using
/
.
CH
VOL
/
VOL
VOL
/
VOL
,
CH
/
CH
to select a picture. <Figure 6.6.3>
to show the picture you want to display.
- RED : Shows/ Hides the JPG file list.
- GREEN : Selects slide show.
- YELLOW : Sets the time interval between slides.
. You can then change the volume by pressing
CH
͋ Press
on
to display the MP3 file list.
͌ Press
on
to display information about the selected MP3 file.
- GROUP : Shows the MP3 file list
- INFO : Shows information about the MP3 file you selected.
<Figure 6.6.3>
3) Data Transfer menu
͈ Select the software you want to download by using
͉ Press
<Figure 6.6.1>
<Figure 6.6.2>
/
CH
in the list <Figure 6.6.4>
to start software downloading
- Please do not switch off your receiver before software downloading is complete.
<Figure 6.6.4>
34
CH
35
6.6 USB Menu
6.6 USB Menu
4) Timer Manager
5) PVR Management
͈ This submenu allows you to set on/off times of your receiver. <Figure 6.6.5>
͉ Press
͊ Press
to select a timer’s parameter.
CH
/
CH
- Disk Information : Choose the hard disk drive. You can view the information of selected
drive. (file system, total size, used size, free size) <Figure 6.6.6>
to change the parameter.
- Timer No : Select the timer that you want to modify. (1- 8)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press
to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press
to display a Channel list pop-up; Select a channel
- Record : To record program. (off/on, This function is available when USB device is
connected)
<Figure 6.6.6>
- Power off : To your receiver power-off
- Format Disk : You can format the USB device. <Figure 6.6.7>
ҫ Note : The receiver supports FAT16 and FAT32(Recommended) of USB device, but
NTFS file system doesn`t support. If USB device is formatted by NTFS, Please
change file system to FAT32(Recommended) by PC.
<Figure 6.6.5>
<Figure 6.6.7>
- Default Recording Drive : You can change the default drive for recording. Default is C:\.
- Testing USB Speed : You can test your USB device for supporting PVR.
- Timeshift Recording Size : Choose the default time-shift size for trick mode.
36
37
6.7 System Information
6.8 Conditional Access System
You can check the current information about your receiver such as receiver model name, S/W
(software) version, H/W (hardware) version, manufacturing date, etc. <Figure 6.7.1>
ҫ Note : This information is useful to download new software and/or repair the
receiver.
1) Card Initializing
To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one service
provider, you will need a Smart Card from each one. Since a Smart Card is connected to a
single service provider, a limited range of channels will be available via it.
ҫ Note : Without the Smart Card, you can watch only Free-To-Air programs.
͈ Insert the Smart Card into the receiver’s slot designed for it.
͉ The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6.8.1>
͊ After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch the
channels offered by the service provider.
<Figure 6.7.1>
<Figure 6.8.1>
38
39
6.8 Conditional Access System
6.9 PVR
2) The Status of the Smart Card
1) File List
͈ You can access detailed information about the Smart Card using the
Main Menu to select ‘CA’ and pressing
. <Figure 6.8.2>
CH
/
CH
keys in the
͉ Proceed with further instructions displayed on the screen to check more detailed information
depending on the Smart Card in use.
ҫ Note : Further detailed information is not mentioned in this manual since the
information depends on the Smart Card in use.
Ȟ File Playback
͈ Press
,
CH
button to show the file list. Select the file you want to play back by using
button.
CH
͉ Press
button. In the right side of screen, detailed information about the selected file will
be displayed. (Total file size / Total time / Elapsed Time and USB device information) <Figure
6.9.1>
͊ If you have partitioned hard drive, Press RED button to select another drive.
͋ Press GREEN button to rename the filename of selected file.
͌ Press YELLOW button to delete the selected file.
͍ Press
button again to see a full screen. And then the following time-bar will appear.
<Figure 6.9.2>
<Figure 6.8.2>
<Figure 6.9.1>
40
,
<Figure 6.9.2>
41
6.9 PVR
6.9 PVR
2) Trick Mode
Ȟ JUMP button
You can operate the trick mode while you are playing the recording files. These functions are
available in playback mode, time-shift mode or recording mode powerfully.
- You can locate the playing time to the desired playing time by using YELLOW button. Set
desired playing time, and press
button.
Ȟ PLAY button
- You can locate the playing time to the desired playing time by using
press this key continuously, the cursor moves very quickly.
- When receiver play recorded file and paused by user, if you want to continue playing your
file, press
or
button.
- And at x2, x4 and x8 trick mode, when you press
button, it will be changed x1 play
mode.
button or the
Ȟ ADVANCE button
- If the time-shift mode is enabled, You can press
- If the playback mode is enabled, You can press
and jumping the live program.
button to jump the live program.
button to stop the current playing file
VOL
VOL
-
-
CH
-
CH
Button : Press this button and the current position will jump to the next bookmarked
position and playback starts from this point.
Button : Press this button and the current position will jump to the previous bookmarked
position and playback starts from this point.
ҫ Note : The maximum number of the bookmark is 15 in a file.
button to adjusting the playing speed. <Figure
<Figure 6.9.4>
42
button. If you
Button : Press this button and small red cursor will be placed at displayed current
position. If you want to remove the bookmarked position, press
button one
more time at bookmarked position.
<Figure 6.9.5>
<Figure 6.9.3>
VOL
To mark a specific place in a file for later retrieval. <Figure 6.9.5>
Ȟ FAST FORWARD button / REWIND button
- When playing the file, you can press /
6.9.4>
- The speed will change to x2, x4, and x8.
- Pause is available.
/
Ȟ BOOKMARK Button
Ȟ PAUSE button
- This button will pause the playing file until you play again with the
button. <Figure 6.9.3>
VOL
43
6.9 PVR
6.9 PVR
3) Instant Recording
4) Timer Recording
ҫ Note : The USB device should have free space over 65 Mbytes.
͈ You can record a current channel by using
button. After 2 seconds, full banner will be
changed to small banner. Time-banner is toggled by INFO button.
If you press INFO button, full time-banner will be displayed. And press INFO button, it will be
disappeared, and also when you press EXIT button, and banner will be disappeared. <Figure
6.9.6>
͉ Press
button. The following picture shows that you can change recording duration.
Default recording duration is 2 hours. <Figure 6.9.7>
- File name : It shows a recorded file name.
- Channel : It shows a current channel.
- Elapsed Time : It shows a current recording time.
- Remained Time : It shows a remained recording time.
- Duration : You can changed the duration of recording time by using NUMERIC button.
- Stop : If you stop the recording, Press the
button.
This function is available when USB device is connected. You can choose a channel to record
the Program Guide menu by using the
button. (Refer to 6.4 Electric Program Guide, 2)
Timer)
5) Time Shift
USB device should have free space over 65 Mbytes. After finishing time shift, time shift file will
be removed.
͈ If you want to pause and resume, press
/
button. <Figure 6.9.8>
͉ If you want to play live TV channel, press
button. <Figure 6.9.9>
͊ The trick-mode operations are provided.
ҫ Note : You can change the default size of Time-Shift in the PVR Management menu.
͊ Trick mode : At current recording position, press button, it is play recorded file with
recording current channel. Even if recording is finished, it is going on playing
recorded file until reach ending time.
VOL
͋ BOOKMARK : Press
button at your desired position.
͌ For play other file with recording of current channel : When you record current channel, select
recorded file at File List. If you press
button or finish playing your recorded file, it will be
back to current recording channel.
<Figure 6.9.8>
<Figure 6.9.9>
6) EPG Recording
This function is available while program recording, file playback and time-shift. You can view the
program guide information by EPG button. <Figure 6.9.10>
͈ It shows the satellite name, transponder information, channel name, duration, and EPG
information.
͉ You can view the previous/next program information by using / /
button.
VOL
<Figure 6.9.6>
<Figure 6.9.7>
ҫ Note : 1. Do not remove the USB device while recording a program.
2. You can’t change to another channel while recording a program.
<Figure 6.9.10>
44
45
VOL
Troubleshooting
Specifications
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does
not work properly, check it according to the procedures shown in the table below:
Problem
Possible causes
The LED light on the front The AC power cord is
disconnected.
panel does not light.
No Picture or sound.
Wrong connection of the
video/audio output to the TV
input terminal.
Remedy
System capabilities Fully DVB compliant
LNB/Tuner input
Connect the power cord properly
into the power socket.
Connect the two terminals
correctly with RCA or RF
cable(s).
Wrong connection of the
satellite antenna cable.
Connect the antenna cable
correctly.
Wrong direction of the
satellite antenna.
Adjust the direction of the
antenna.
No signal or weak signal.
Check the cable connections,
the LNB and other equipment
connected between the LNB and
the receiver, or adjust the antenna.
Demodulator
Black-and-white
screen or V-Hold.
Type the setting values correctly.
Your TV mode (PAL/NTSC)
is different from the satellite
broadcasting mode.
Use a TV of the same mode.
Connect a NTSC/PAL converter
between the receiver and the TV.
The remote controller Batteries are exhausted.
Change the batteries.
is not working.
Fluorescent light is interfering Switch off the light.
with the remote controller.
Remote controller is
incorrectly aimed.
46
Aim the remote control at the
receiver.
IEC 169-24, female
Frequency range
950MHz ~ 2150MHz
Signal level
-65dBm ~ -25dBm
LNB supply
DC13/18V, max 400mA
LNB switch control
22KHz
DiSEqC
Ver 1.0/1.1/1.2/USALS Compatible
Front end
QPSK
Symbol rate
1Msps ~ 45Msps
SCPC and MCPC Capable
System resource
Wrong setting of channel
information in the MENU
screen.
Connector
Video decoder
Spectral inversion
Auto conversion
Processor
32bit processor (150MHz)
SDRAM
16Mbyte
FLASH
2Mbyte
EEPROM
32Kbit
MPEG 2
Main Proflie @Main Level
Data Rate
up to 15M bits/s
Resolution
720 X 576, 720 X 480
Video format
NTSC, PAL
Aspec Ratio
4:3,16:9
Teletext
DVB compliant
MPEG Audio
MPEG 1 layer 1 &2
Type
Mono,Dual mono,Stereo,Joint Stereo
Sampling rates
32, 44.1 and 48 KHz
Serial data interface
Connector
9pin D-sub male, Max 115K bps
Remote control
Code
NEC-IR
Operating condition
up to 7 Meter
USB Supply
DC 5V Max 500mA
USB
47
Power supply
Input
100V~240V(50~60Hz) - 1.0A
(Adaptor)
Output
DC 12 / 24V
Rear Panel
connectors
Video
1 X RCA cinch
Audio L/R
2 X RCA cinch
Component ( Y/Pb/Pr)
3 X RCA cinch
Digital Audio
1 X RCA cinch(Coaxial)
Serial data
9pin D-sub
Digital tuner input
IEC 169 - 24
Loop-through Digital tuner
IEC 169 - 24
Terrestrial ant input
IEC 169 - 2
RF modulator output
IEC 169 - 2
RF modulator
PAL G/I/K TV Type
Physical
Specification
3.0A
Connector
IEC 169-2, female/male
Frequency
470 ~ 860MHz
Output channel number
21 ~ 69
Size (W X H X D)
260 X 54 X 232(mm)
Weight (Net)
1.8 Kg
ƈDATA TRANSFERƈ
is best carried out by an
authorized service person.
please contact your
appointed dealer for more
information regarding
this feature.
48
">