Century Tool | 118-010 | One Torch for Virtually Any Plasma Cutting System!

MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH
One Torch
for Virtually Any
Plasma Cutting
System!
Take the
Challenge
30 Days, 100% Satisfaction
or Your Money Back,
Guaranteed!
Total Plasma Cutting Flexibility
Call 1-800-752-7621 for details.
www.thermal-dynamics.com
Available With Our ATC®
Quick Change Connecto
r!
The Revolution in Plasma Torches Has Begun
The First Universal Plasma Torch!
The 1Torch® RPT® torch is the first plasma cutting torch that performs with virtually all
plasma cutting power supplies. The 1Torch works with high frequency start systems,
CD start systems, touch start systems and moving parts (blow back) start systems.
Install the 1Torch on your current plasma power supply and you immediately benefit from the
latest in high performance torch technology available today.
Important Features Include:
Ergonomic Torch Handle
Lower Consumable Parts Inventories and Costs
With an innovative, easy-to-use
torch trigger release, encapsulated protected torch head and
precisely engineered grip, the
1Torch RPT torch is both easy
and comfortable to use.
The less than 25 consumable parts used with the 1Torch
RPT torch can replace over 575 different consumable
parts used over a broad range of plasma systems.
Improved Leads
1Torch Leads are lightweight, extremely flexible and tough
– the ideal combination of durability and ease of use.
Extended or Protected
Consumable Parts
We designed our consumable
parts to adapt to your cutting style. By simply changing
the shield cup, you can either have:
ATC® (Advanced Torch
Connector) Quick
Disconnect Option
One Year Torch & Leads Warranty
Our quick disconnect
design brings extra flexibility to any plasma system.
Imagine being able to change out a damaged plasma
cutting torch, easily convert from a hand to a machine
torch operation, or simply put on a different size torch all
in the matter of a few seconds and not have to use any
tools to complete the task!
Precision Engineered Torch Consumable Parts
ATC Lead Extensions for Improved Versatility
The 1Torch RPT torch introduces a completely new tip
You can add substantial flexibility and versatility to your
cutting operations with the use of Lead Extensions.
Quick Disconnect Lead Extensions, in 15 ft., 25 ft. and
50 ft. lengths, make it easy and efficient to add or subtract lead length according to the job requirements.
• An Extended Tip for greater visibility and
control and precision drag cutting at low power.
• A Protected Tip for on-the-plate drag cutting
at high power up to 100 amps.
technology. Plasma gas management is an integral part
of the tip design. Each tip is uniquely tuned to optimize
cut performance at its rated cutting current. The result
is precision gas management, longer consumable parts
life and better cut performance across the entire range
of 1Torch tips.
page 2
1Torch RPT torch and ATC connector are patent pending.
U.S. Plasma Manual Customer Care: 800-752-7621 /
U.S. Plasma Automation Customer Care: 866-279-2628 /
FAX
FAX
800-221-4401
316-941-4491
The Revolution in Plasma Torches Has Begun
One Torch for Virtually Any Plasma
Cutting System!
Selecting the Right Torch Package for Your Needs . . .
It’s as easy as 1, 2, 3!
2
Adapter Kit Selection
1
Select the appropriate Adapter Kit from
Chart 2 (pg. 5). If you selected a torch with
the ATC Connection, you will also need an
ATC Receptacle Adapter (see Chart 1).
Torch and Leads Selection
Chart 1 (pg. 4) gives you all the information
you’ll need to select the right torch. Torches
are grouped into two sections – SL60® and
SL100® Hand Torches. Find the appropriate
section, decide whether the standard RPT®
connection or the ATC® Torch Connection is
right for you, then select the torch with the
desired amperage range and leads length.
3
Spare Parts Selection
From Chart 3 (pg. 6), select an RPT Spare Parts
Kit or specific consumable parts that best suit
your cutting requirements.
Torch Connection Options
The diagram below shows the differences between the Standard RPT and the ATC Torch connections.
Standard RPT Connection
Power
Supply
A
RPT
Torch Adapter Kit
(O2B)
ATC Torch Connection
Power
Supply
B
ATC
ATC Adapter Kit
page 3
Torch Adapter Kit
The Revolution in Plasma Torches Has Begun
1
Torch and Lead Selection
Listed below are the Torch and Lead selection charts for
the SL60® and SL100® Hand 1Torch RPT® torches.
Ordering Information
Hand Torches
SL60
SL100
Light/Medium Duty Torch
20-60 Amps
Medium/Heavy Duty Torch
30-100 Amps
C AT N O .
A
DESCRIPTION
C AT N O .
A
Standard RPT (O2B)
Torch Connection
DESCRIPTION
Standard RPT (O2B)
Torch Connection
Torch & Leads
SL60 Hand Torch
B
Torch & Leads
SL100 Hand Torch
(20-60 Amps)
7-5200
SL60, 75°, 20’ (6.1m) Torch/Leads
7-5201
SL60, 75°, 50’ (15.2m) Torch/Leads
7-5202
7-5203
B
ATC®
Torch Connection
ATC
Torch Connection
Torch & Leads
SL60 Hand Torch w/ ATC
(30-100 Amps)
SL100, 75°, 20’ (6.1m) Torch/Leads
SL100, 75°, 50’ (15.2m) Torch/Leads
Torch & Leads
SL100 Hand Torch w/ ATC
(20-60 Amps)
(30-100 Amps)
7-5204
*SL60, 75°, 20’ (6.1m) Torch/Leads
7-5206
*SL100, 75°, 20’ (6.1m) Torch/Leads
7-5205
*SL60, 75°, 50’ (15.2m) Torch/Leads
7-5208
*SL100, 75°, 50’ (15.2m) Torch/Leads
ATC Adapter Kit
ATC Adapter Kit
ATC Receptacle Adapter
7-5207
ATC Receptacle Adapter
ATC Receptacle Connector
7-5207
* This receptacle adapter is required
for each power supply using an ATC
torch connection. This is connected
to the torch adapter kit specific to
each power supply.
ATC Receptacle Connector
* This receptacle adapter is required
for each power supply using an ATC
torch connection. This is connected
to the torch adapter kit specific to
each power supply.
ATC Lead Extensions
ATC Lead Extensions
Lead Extensions - Standard
Lead Extensions - Standard
7-7544
15’ (4.5m) Lead Extension
7-7544
15’ (4.5m) Lead Extension
7-7545
25’ (7.6m) Lead Extension
7-7545
25’ (7.6m) Lead Extension
7-7552
50’ (15.2m) Lead Extension
7-7552
50’ (15.2m) Lead Extension
NOTES:
*Total lead length including torch and extension(s), should not exceed the maximum length specified by the power supply manufacturer.
International Customer Care: 905-827-9777 /
www.thermal-dynamics.com
FAX
905-827-9797
page 4
The Revolution in Plasma Torches Has Begun
Adapter Kit Selection
Listed below is the Adapter Kit selection charts for
the Hand 1Torch RPT torch.
Torch Adapter Kits
2
The model of the plasma cutting system must be known to determine the adapter kit required.
Manufacturer
Power Supply Model
Manufacturer
Catalog
Number
LINCOLN®
AIRCO®/BOC®
PCS-43
PCS-53, PCS-80, PCS-90
7-3425
7-3435
50
Pocket 25
7-3438
7-3476
82020*, 82050*, M2050*
82100
7-3476
7-3430
Pro-Cut®
Pro-Cut®
Pro-Cut®
Pro-Cut®
CEBORA®
DAIHEN®
3W722A*, 5Z031B*
7-3476
PCM-SMi, 500i, 625i, PCS-43
PCS-53, 80, 90
ESP-100i
PCM-750i, 875, 1000i, 1125
Sidewinder 30, 55, 105
Powercut® 650
Powercut® 875, 1125
Powercut® 1250, 1500
7-3425
7-3435
7-3426
7-3429
7-3434
7-3464
7-3465
7-3462
System 50, 65, 100
7-3439
OTC
7-3425
7-3426
7-3428
7-3427
7-3440
7-3457
P-TRON
DAYTON
®
(yellow)
Smoothcut 30, 625
Smoothcut 50 (single gas), 100
Smoothcut 50 (dual gas)
Smoothcut II 35A, 60A, 100A
Fab Shop
Cybercut 2050*
12/150, 12/200
7-3476
2020*, 2050*
7-3476
Plazcut 60†/Zipcut
Spectrum® 250D, 500, 750
Spectrum® 700, 1000, 1250, PLUS
Spectrum® 3080*
Spectrum® 650*, 701*, 2050*
Spectrum® 300*
Spectrum® 375*
Spectrum® 625*
7-3432
7-3433
7-3430
7-3456
7-3457
7-3476
7-3477
7-3478
MULTIQUIP MQ®
PCX50SS
7-3437
Omnicut 375
PCA-30/60, 65
7-3438
7-3441
Panasonic® D-5000, D-7000
7-3437
P-Tron 75, 100
7-3437
Starcut
7-3430
Powerpro 55, 75
SPC-30, 20-50, 40-80
7-3487
7-3442
YA-3230, YA-3440
YA-2230*, YA-5550*, YA-5550A*
7-3430
7-3476
SOL 2020* (118-009, 118-010), SOL 2050* (118-015,118-016)
SOL 2105, SOL 2106
7-3476
7-3430
NU-TECSYS®
®
POWCON®
SMITH®
HYPERTHERM®
Max® 40, HT® 40 (H/F Start)
Max® 70, Max® 80, Max® 100 w/ & w/o Q.D.
Max® 42*, 43*, 40cs*
powermax® 600*, 800*, 900* w/ Q.D.
powermax® 1100*
powermax® 1000*, 1250*
Max® 40cs* (w/o Q.D.)
powermax® 380*
powermax® 600* w/o Q.D.
powermax® 800*, 900* w/o Q.D.
powermax® 1650*
powermax® 350*
powermax® 190C*
L TEC®
7-3431
see 63-2530 for details
MILLER®
7-3432
7-3437
HOBART®
7-3486
see 63-2530 for details
MATCO®
SC-60P
MRAT-70
HARRIS®
40
55
60
80
MARQUETTE®
CENTURY®
ESAB®
Catalog
Number
Power Supply Model
7-3430
SNAP-ON®
7-3454
7-3455
7-3461
7-3476
7-3477
7-3480
7-3481
7-3483
7-3484
7-3485
SOLAR®
THERMAL DYNAMICS®
(green)
PCM-31, SMi, 32i/34i, VPi
PCM-500i, 625i, PCS-80i
PCM-50A, 70, 80, 52i/54i, 82i/84i
ESP-100i, PCM-50, PCM-100 (Single Gas)
PCM-50, PCM-100 (Dual Gas)
PCS-40
PCM-750i, 1000i
PCM-101
7-3425
7-3426
7-3430
7-3435
7-3436
PAK® 3XR, 5XT, 5XR, 6XR, 7XR, 625XR, 750XR
PAK® 8XR, 10XR, 1000XR, 1250XR,
PakMaster® 75, 100
PakMaster® 50XL/XLP, 75XL/XLP, 100XL/XLP
CUTMASTER® 50, 75, 80XL, 100
PakMaster® 25, 38XL, EconoPAK® 25
Drag-Gun® 38, PAK® 4Xi, 6Xi
PAK® 2XT, Dynapak® 110
PakMaster® 50 w/ Smart Torch (Q.D.)
EconoPAK® 50
EconoPAK® 100
PAK® 5
PAK® 10
7-3446
7-3434
7-3447
7-3443
7-3445
7-3449
7-3450
7-3444
7-3436
* Non-HF Systems.
†The Miller PlazCut machines with Serial Numbers beginning JE are not compatible with 1Torch® RPT Torches.
NOTES:
Each Adapter Kit includes connection fitting, electrical connectors and installation instruction sheets for the selected power supply.
AIRCO/BOC are registered trademarks of The BOC Group plc; CEBORA is a registered trademark of Cebora S.p.A.; DAIHEN is a registered trademark of Daihen Inc.; ESAB, L-TEC and Power-Cut are
registered trademarks of ESAB AB; HARRIS, LINCOLN and Pro-Cut are registered trademarks of Lincoln Electric Co.; HOBART is a registered trademark of Hobart Brothers Co.; HYPERTHERM, Max and
powermax are registered trademarks of Hypertherm, Inc.; MILLER and Spectrum are registered trademarks of Miller Electric Mfg. Co.; MULTIQUIP is a registered trademark of Multiquip, Inc.; NU-TECSYS is a registered trademark of Nu-Tecsys, Inc.; PANASONIC is a registered trademark of Matsushita Electric Industrial Co., Ltd.; P-TRON is a registered trademark of P-Tron Plasma/Tech Systems;
SMITH is a registered trademark of Smith Equipment Co.; INNERLOGIC is a trademark of Innerlogic; none of the afore mentioned registered trademarks are in any way affiliated with Thermal Dynamics
or Thermadyne Industries, Inc.; THERMAL DYNAMICS, PAK, CUTMASTER, PakMaster, EconoPAK, Dynapak and Drag-Gun are registered trademarks of Thermal Dynamics Corp.
International Customer Care: 905-827-9777 /
www.thermal-dynamics.com
FAX
905-827-9797
page 5
The Revolution in Plasma Torches Has Begun
Description
1Torch ®
Cat. No.
Consumables / Parts
O-Ring
O-Ring
Electrode, MaximumLife®
Start Cartridge
Tip, 20A, Drag
Tip, 30A, Drag
Tip, 40A, Drag
Tip, 40A, Cutting
Tip, 50/55A, Cutting
Tip, 60A, Cutting
Tip, 70A, Cutting
Tip, 80A, Cutting
Tip, 90/100A, Cutting
Tip, A, Gouging
Tip, B, Gouging
Tip, C, Gouging
Tip, D, Gouging
Shield Cup
Shield Cup Body, MaximumLife®
Shield Cap, Drag, 40A
Shield Cap, Drag, 50-60A
Shield Cap, Drag, 70-100A
Shield Cap, Mach, 40A
Shield Cap, Mach, 50-60A
Shield Cap, Mach, 70-100A
Shield Cap, Deflector
Shield Cap, Gouging
Product Description
8-3487
8-3486
SL60® / SL100®
9-8215 ■
1Torch Parts
9-8213 ■
9-8205
9-8206
9-8207
9-8208
9-8209
9-8210 ▲
9-8231
9-8211
9-8212 ●
9-8225
9-8226
9-8227
9-8228
Spare Parts Kit, 30 Amp
5-2550
9-8218
5-2551
9-8237 ■ Spare Parts Kit, 40 Amp
Spare Parts Kit, 50/55 Amp
5-2552
9-8244
5-2553
9-8235 ▲ Spare Parts Kit, 60 Amp
5-2554
9-8236 ● Spare Parts Kit, 70 Amp
Spare Parts Kit, 80 Amp
5-2555
9-8245
Spare Parts Kit, 90/100 Amp
5-2556
9-8238
9-8239
9-8243 ■ (Note: All Spare Parts Kits include ten (10) Tips, five (5) Electrodes and one (1) Start Cartridge.)
■ Standard for all RPT® Torches
▲ Standard on SL60 RPT Torches
● Standard on SL100 RPT Torches
9-8241
Product Description
Catalog No.
3
Spare Parts Selection
Ordering Information
Catalog No.
Product Description
Catalog No.
Accessories
Single Stage
Air Filter
Remote Pendant Control,
20 ft. (6.1m)
Cutting Guide Kits
Leather Leads
Cover
7-7507
20 ft. (6.1m)
9-1260
25 ft. (7.6m)
9-1270
50 ft. (15.2m)
9-1280
Straight Line
Cutting Guide
7-3460
Circle
Guide Kit
7-3291
Roller/
Radius Kit
7-7501
Deluxe Kit
7-8910
7-8911
For use with
Machine Torch
1TORCH, ATC, RPT, SL60 and SL100, trademarks of Thermal Dynamics Corporation, are registered with the U.S. Patent and Trademark Office, and are the subject of trademark registrations and pending applications in numerous other countries.
For information on trademark registrations of Thermal Dynamics Corporation, contact the local trademark offices in the countries of interest.
U.S. Plasma Manual Customer Care: 800-752-7621 / FAX 800-221-4401 • International Customer Care: 905-827-9777 / FAX 905-827-9797
U.S. Plasma Automation Customer Care: 866-279-2628 / FAX 316-941-4491 • www.thermal-dynamics.com
A Global Cutting & Welding Market Leader™
WO R L D H E A D Q UA RT E R S :
16052 Swingley Ridge Road, Suite 300
THE AMERICAS
Denton, TX USA
U.S. Customer Care
Ph: (1) 800-752-7621
Fax: (1) 800-221-4401
Miami, FL USA
Sales Office, Latin America
Ph: (1) 954-727-8371
Fax: (1) 954-727-8376
West Lebanon, NH USA
Customer Care, Plasma
Ph: (1) 800-752-7621
Fax: (1) 800-221-4401
Form No. 63-2217 (8/06)
EUROPE
ASIA/PACIFIC
Oakville, Ontario, Canada
International Customer Care
Ph: (1) 905-827-9777
Fax: (1) 905-827-9797
Chorley, United Kingdom
Customer Care
Ph: (44) 1257-261755
Fax: (44) 1257-224800
Cikarang, Indonesia
Customer Care
Ph: 62 21+ 8983-0011 / 0012
Fax: 62 21+ 893-6067
Rio de Janeiro, Brazil
Customer Care
Ph: (55) 21-2485-8998
Fax: (55) 21-2485-8866
Milan, Italy
Sales Office
Ph: (39) 02-98-80320
Fax: (39) 02-98-281773
Osaka, Japan
Sales Office
Ph: 816-4809-8411
Fax: 816-4809-8412
© Thermadyne Industries, Inc., 2006
•
St. Louis, Missouri 63017
Melbourne, Australia
Customer Care:
Ph: 1300-654-674
Fax: 613+ 9474-7391
International:
Ph: 613+ 9474-7508
Fax: 613+ 9474-7488
www.thermadyne.com
Rawang, Malaysia
Customer Care
Ph: 603+ 6092-2988
Fax: 603+ 6092-1085
U. S. A .
Shanghai, China
Sales Office
Ph: 86 21+ 6280-1273
Fax: 86 21+ 3226-0955
Singapore
Sales Office
Ph: 65+ 6832-8066
Fax: 65+ 6763-5812
Printed in U.S.A.
Download PDF