PS-VC-204_v1.0
Product Specification of VC-204
Confidential
Product Specification
Ethernet Over VDSL 2 Bridge
VC-204
Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision
Version 1.0
Author
Reviewed by:
Date
2009/01/08
Neo Tsai
Tom Shih
Author
Neo Tsai
Change List
Initial release
Editor:
Approved by:
Kent Kang
Tom Shih
Product Specification of VC-204
Confidential
1. PRODUCT DESCRIPTION
PLANET's state-of-the-art Ethernet-over-VDSL products are based on two core networking technologies: Ethernet and
VDSL (Very-high-data-rate Digital Subscriber Line). This technology offers the absolute fastest possible data
transmission speeds over existing copper telephone lines without the need for rewiring.
The VC-204 Ethernet over VDSL2converter has a switching architecture with 4 RJ-45 10/100Mbps Ethernet port and
one VDSL port (with 2 RJ-11 connectors). The VC-204 can be set to CO mode or CPE mode via a DIP switch. When
the VC-204-CO is used to connect to the other VC-204-CPE as a standalone pair, up to 100/55Mbps asymmetric data
rate at 200m and up to 25/4Mbps asymmetric band plan at 1.6km. This configuration is ideal for use as an Ethernet
extender for your existing Ethernet network. The VC-204 can also be connected to PLANET’s 8 VDSL2-port + 1 Gigabit
Managed Switch, the VC-810S, to offer the most flexible approach to new network design and existing network
upgrades.
PLANET's Ethernet over VDSL2 Converter solution provides a much cheaper replacement and smooth migration for
existing Long Reach Ethernet (LRE) networks.
High-performance network processor and integrated VDSL2 modem deliver speed and throughput ideal for FTTH
deployments. The VC-204 ensure quality delivery of delay-sensitive voice and video services such as VoIP and
standard and HDTV. It enable the delivery of triple play services over IP-based VDSL2 “first mile” networks.
The VC-204 is compatible with below PLANET VDSL2 devices:
„
VC-201A – Ethernet over VDSL2 Converter with 1 LAN ports, 17a profile
„
VC-810S – 8-Port VDSL2 + 1G TP/SFP Managed Switch, 12a / 17a profile
„
VC-2400M – 24-Port VDSL2 + 2G TP/SFP Managed Switch, 17a / 30a profile
Filename: PS-VC-204_v1.0.doc
Page 2 of 7
Printed on 2/11/2009
Product Specification of VC-204
Confidential
2. PRODUCT FEATURES
□ Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
□ Cost-effect VDSL2 CO / CPE bridge solution
□ One box design, CO / CPE selectable via DIP Switch
□ Defines asymmetric (Plan 998) and symmetric (Plan 997) band plans for the transmission of upstream and
downstream signals
□ DMT (Discrete Multi-Tone) line coding
□ Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
□ Built-in POTS splitter to share voice and data
□ Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POTS connection
□ Voice and data communication can be shared based on the existing telephone wire simultaneously
□ Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
□ VDSL2 stand-alone transceiver for simple bridge modem application
□ Advantage of minimum installation time (Simply as Plug-and-Play)
□ Selectable target band plan and target SNR margin
□ Supports extensive LED indicators for network diagnostics
3. PRODUCT SPECIFICATION
3.1 MAIN COMPONENT
VDSL Analog Chip
Metanoia MT3204
x1
VDSL Digital Chip
Metanoia MT2204
x1
10/100 Fast Ethernet MAC
Realtek RTL8306S
x1
3.2 FUNCTIONAL SPECIFICATIONS
VC-204
Model
Ethernet over VDSL 2 Bridge
Hardware Specification
10/100Base-TX: 4 RJ-45, Auto-negotiation and Auto-MDI / MDI-X
Ports
VDSL: 1 RJ-11, female Phone Jack
PHONE: 1 RJ-11, Built-in splitters for POTS connection
DIP Switch
4 position DIP switch
• CO / CPE mode select
Functionality
• Selectable fast and interleaved mode
• Selectable target band plan
• Selectable target SNR mode
• VDSL-DMT
Encoding
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a Support)
Filename: PS-VC-204_v1.0.doc
Page 3 of 7
Printed on 2/11/2009
Product Specification of VC-204
Confidential
• One Power
LED Indicators
• 4 for RJ-11 / VDSL2
• 1 for per RJ-45 10/100Base-TX port
• 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
Cabling Type
• 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
• VDSL: twisted-pair telephone wires (AWG24 or better) up to 1.6km
• Full VDSL2 bandwidth up to: (Down Stream / Up Stream)
Asymmetric Mode
Performance
Symmetric Mode
- 200m -> 100/55Mbps
- 200m -> 90/90Mbps
- 400m -> 90/50Mbps
- 400m -> 90/90Mbps
- 600m -> 70/40Mbps
- 600m -> 70/70Mbps
- 800m -> 60/25Mbps
- 800m -> 55/50Mbps
- 1000m -> 45/15Mbps
- 1000m -> 40/35Mbps
- 1200m -> 35/10Mbps
- 1200m -> 30/25Mbps
- 1400m -> 30/6Mbps
- 1400m -> 25/20Mbps
- 1600m -> 25/4Mbps
- 1600m -> 20/15Mbps
Standard Conformance
Regulation Compliance
FCC Part 15 Class A, CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow Control
Standards Compliance
Filename: PS-VC-204_v1.0.doc
ITU-T
-
G.993.1 (VDSL)
-
G.997.1
-
G.993.2 VDSL2 (Profile 17a )
Page 4 of 7
Printed on 2/11/2009
Product Specification of VC-204
Confidential
3.3 PHYSICAL SPECIFICATION
■
Dimensions
155 x 86 x 26mm (W x D x H)
■
Weight:
0.38 kg
■
Front view
■
Rear view
Filename: PS-VC-204_v1.0.doc
Page 5 of 7
Printed on 2/11/2009
Product Specification of VC-204
Confidential
■
LED definition
†
System
LED
Color
PWR
Green
†
Function
Lit
Power ON.
Off
Power OFF.
VDSL
LED
Color
ACT
Sync
Function
Lit
Indicate that the VDSL link is established.
Fast Blink
Indicate that the VDSL link is at training status.
Slow Blink
Indicate that the VDSL link is at idle status.
Off
Indicate that the port is link down.
Lit
Indicate that the VDSL link is established.
Fast Blink
Indicate that the VDSL link is at training status.
Slow Blink
Indicate that the VDSL link is at idle status.
Green
Green
CO
Green
Lit
Indicate the VDSL Bridge is running at CO mode.
CPE
Green
Lit
Indicate the VDSL Bridge is running at CPE mode.
†
10/100Base-TX Port
LED
Color
Function
Lit
LNK/ACT
Indicate that the port is link up.
Indicate that the switch is actively sending or receiving data over
Green
Blink
Off
that port.
Indicate that the port is link down.
„ DIP Switch Setting
DIP-1
DIP-2
DIP-3
DIP-4
Mode
Channel
Band Plan
SNR
OFF
CO
Interleave
Symm
9dB
ON(default)
CPE
Fast
Asymm
6dB
Filename: PS-VC-204_v1.0.doc
Page 6 of 7
Printed on 2/11/2009
Product Specification of VC-204
Confidential
3.4 ENVIRONMENTAL SPECIFICATION
Operating
Temperature:
0~50°C
Relative Humidity:
10~90 %( non-condensing)
Storage
Temperature:
-25~70°C
Relative Humidity:
10~90 %( non-condensing)
3.5 ELECTRICAL SPECIFICATION
Power Requirement: 5V / 2A
Power Consumption: 7.20 Watts/ 24 BTU (maximum)
3.6 REGULATORY COMPLIANCE
FCC Part 15 Class A, CE
3.7 RELIABILITY
MTBF > 50,000 hours @25 Degree C
3.8 BASIC PACKAGING
• Ethernet over VDSL2 Bridge x1
• RJ-11 Telephone line x1
• AC-DC Power Adapter (Output: 5VDC, 2A max.) x1
• User’s manual x1
3.9 PACKING INFORMATION
Dimension
410mm x 310mm x 265mm (W x D x H)
Weight
0.68kg (Gross Weight)
10pcs in one carton
Filename: PS-VC-204_v1.0.doc
Page 7 of 7
Printed on 2/11/2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement