Smart-UPS® RT Features and Benefits
AVA I L A B I L I T Y
A D A P TA B I L I T Y
PROTECTION
Automatic internal bypass Supplies utility
Plug-and-Play external batteries Ensures
Frequency and voltage regulation Preserves
power to the connected loads in the event of a UPS
overload condition or fault.
clean, uninterrupted power to the loads when
adding extra runtime to the UPS.
Scalable runtime Allows quick addition of more
runtime when needed.
Rack/Tower convertible Protects the initial
battery life and maximizes runtime by correcting
poor frequency and voltage conditions without
discharging the battery.
Intelligent battery management Provides
higher availability through intelligent precisioncharging that maximizes battery performance, life,
and reliability.
Hot-swappable batteries Ensures clean,
uninterrupted power to protected equipment
throughout battery replacement.
investment in the UPS when migrating from tower
to rack-mount environment.
Flash-upgradeable firmware Allows
implementation of new firmware upgrades.
SERVICEABILITY
User-replaceable batteries Enables simple
Power conditioning Protects connected loads
from surges, spikes, lightning, and other power
disturbances.
Cold Start
installation costs by enabling the use of smaller
generators and cabling.
Enables UPS to power-up
without utility power
upgrades and replacement of the batteries.
Automatic self-test Ensures early detection of
Cold-start capable Provides temporary battery
equipment upon the return of utility power.
potential problems by periodic testing of UPS
components.
power when the utility power is out.
InfraStruXure Manager Compatible Enables
™
warning fault analysis ensuring proactive
component replacement.
Input power factor corrected
Ensures integration in various environments
Faster recharge time
Ensures system availability
during successive power failures
Ensures seamless
power to the load
even in the event of
catastrophic UPS
failure
Safety-agency approved Ensures product
testing and approval to work safely with the
connected loads and within the environment.
Disconnected battery notification Warns when
Network manageable Provides remote
Audible alarms Provides notification of
Hot-swap/User-replaceable batteries
changing utility power and UPS conditions.
Ensures continuous operation of the
load even when the batteries are
being replaced
a battery is not available to provide backup power.
management cards.
Batteries are preserved for power outage and have longer life expectancy
Built-in automatic
and manual bypass
Resettable circuit breakers Enables quick
recovery from UPS overload events.
SmartSlot Customize UPS capabilities with
Wide input voltage range
Enables quick and
easy configuration
of the UPS
Rack/Tower Convertible
centralized management via APC’s InfraStruXure
Manager.
management of the UPS over the network.
Reduce utility and wiring costs
Terminal Mode
Programmability
Generator compatible Ensures clean,
Automatic restart of loads after UPS
shutdown Automatically starts up the connected
MANAGEABILITY
UPS is field
upgradeable
Input power factor correction Minimizes
uninterrupted power to the loads in the event of an
extended power outage
Predictive failure notification Provides early-
Flash upgradeable
firmware
LED status indicators Quickly understand UPS
Web management
Provides remote monitoring and
graceful shutdown
Scalable runtime
status with indicators.
Smart-UPS® RT units are
X-certified for use with
APC InfraStruXure™
Serial connectivity Provides management of
the UPS via a serial port.
Unlimited runtime for
critical applications
Smart-UPS® RT Options
B AT T E R Y PA C K S
RAIL KITS
SERVICE BYPASS UNITS
An unlimited number of rack/tower convertible
external battery packs can be added to
achieve desired levels of runtime. Smart-UPS
RT battery packs are hot-swappable so you
never have to bring down your mission critical
loads to service the unit.
Enables a Smart-UPS RT UPS, battery-pack and
isolation transformer to be installed in either a 2post rack or 4-post 19" rack.
Rack-Mount, Wall-Mount and Tower Service
Bypass Panels featuring quick transfer time and
Wraparound service bypass.
AP9625 2-post rail-kit for Smart-UPS RT
SBP3000 Designed for Smart-UPS RT 3000VA,
SURTRK 4-post rail-kit for Smart-UPS RT
120V models. 2U inside the rack, hardwire input
and output.
1500/2000VA models and SURTA48XLBP
SURT192XLBP Battery
SURTRK2 4-post rail-kit for Smart-UPS RT
pack for APC Smart-UPS RT
3000/5000/7500/10,000 VA
models, 3U inside the rack
3000/5000/7500/10,000VA models, SURT192XLBP,
and SURT003
SURT192XLBP
SURTA48XLBP
SURTA48XLBP Battery
AP9625
SBP5000RMT2U Designed for Smart-UPS RT
3000/5000VA, 208V models. 2U inside the rack, (2) x
L6-20R and (2) L6-30R
output
OUTPUT STEPDOWN/
ISOLATION TRANSFORMER
P D US
Output stepdown/isolation transformer for use with
Smart-UPS RT 3000/5000/7500/10,000VA models.
Steps down 208V to 120V.
AP9561 Basic rack PDU,
SURT003 Tower stepdown transformer, rated at
5000VA, rack-mountable with rail-kit (SURTRK2), 3U
inside rack
Power distribution for rack-mount equipment.
AP9561
208V input and output,
Input plug: NEMA L6-30P
Output Receptacles: 12 X
IEC 320 C13
AP9566
AP9566 Basic rack PDU,
208V input and output, Input plug:
NEMA L6-20P Output Receptacles:
12 X IEC 320 C13
SURT005 Rack optimized
stepdown transformer, rated
at 4900VA, 2U inside rack
A U T O M AT I C
TRANSFER SWITCH
AP7622
Provides redundant power to single-corded
equipment.
SU045X163 208V
input and output,
Input plug: 2 x
NEMA L6-30P
Output
Receptacles:
NEMA L6-30R
SU045-1
SBP10KRMT4U
AP7622 Metered rack PDU, Zero U, 208V
SU045-1 208V input and output, Input plug: 2 x
Designed for Smart-UPS
RT7500/10,000VA, 208V
models, 4U inside the
rack, (3) x L6-20R and (3)
L6-30R output
input and output. Input plug NEMA L620P, Output receptacles 6 x L6-20R
NEMA L6-20P Output Receptacles: NEMA L6-20R
AP9570 Basic rack PDU, 208V input and
output, Input plug: NEMA L6-30P Output
Receptacles: 4 X IEC 320 C19
SURT005
pack for APC Smart-UPS RT
1500/2000VA models, 2U
inside the rack
SBP10KRMT4U
SURTRK2
For more information about Smart-UPS® RT, including runtimes, configuration, and services, go to www.apc.com
SBP5000RMT2U
SURT003
SURT007 Output Hardwire
Kit, for use with Smart-UPS
RT 3000/5000VA models.
Output: Hardwire terminal
block.
AP7750 120V
input and output,
Input plug: 2 x 515P, Output
Receptacles: 8 x 5-15R
SURT007
For more information about Smart-UPS® RT, including runtimes, configuration, and services, go to www.apc.com
AP7750
Technical Specifications
SMART-UPS
RT 1500
SMART-UPS
RT 2000
SMART-UPS
RT 3000
(120V)
SMART-UPS
RT 3000
(208V)
1.5kVA/1.05kW
2kVA/1.4kW
3kVA/2.1kW
3kVA/2.1kW
SMART-UPS RT
5000
SMART-UPS
RT 7500
SMART-UPS
RT 10000
5kVA/3.5kW
7.5kVA/6kW
10kVA/8kW
208/120V
OUTPUT
Capacity
Output Voltage
120VAC
208, 240 VAC (user selectable), Single Phase
Output Voltage Regulation
1% static, 5% dynamic
Smart-UPS® RT
(2) L6-20R, (2) L6-30R, hardwire output terminal
Output Connection
(6) 5-15
Efficiency at full load (typical)
(6) 5-15, (2) 5-20
87%
90%
Output frequency (sync’d to mains)
86%
(2) L6-20R, (2) L6-30R (120VAC available w/
step-down transformer)
91%
block (120VAC available w/ step-down
transformer)
92%
92%
92%
Performance power protection
with scalable runtime for spaceconstrained computer rooms and
voice and data networks
50 or 60 Hz, +/- 3Hz (auto-select default) [or 50 or 60 Hz +/-0.1Hz (user selectable)]
Bypass
Automatic
Automatic/Manual
Overload Capacity (on-line)
105% - infinite, 125% - 1 min, 150% - 30 seconds
Output Voltage Distortion
<2% for linear loads, <5% for non-linear loads
Crest Factor
3:1
Heat Dissipation (Watts), nominal line
90
140
310
192
305
450
650
INPUT
Nominal Input Voltage
120VAC
208/240VAC (Single Phase)
Input Frequency
45-65 Hz Auto-selecting
Input Connection
5-15P
Input Voltage Range
5-20P
L5-30P
L6-30P
90-150VAC (at full load), 50-150VAC (at half load)
Input Power Factor (full load)
Hardwire
160-280VAC (at full load), 100-280VAC (at half load)
>.95
BATTERIES
Battery Type
Maintenance-Free, Sealed Lead-Acid, valve regulated, 3-6 years typical lifetime
Recharge Time to 90% (internal battery)
< 3 hours
Runtime with internal battery (full/half load)
8/22min
5/15min
15/31min
15/31min
5/16min
7/19min
4/13min
Runtime with one additonal battery pack
(full/half load)
39min/1hr24min
27min/1hr
1hr/2hr9min
1hr/2hr9min
27min/1hr4min
16min/39min
11min/28min
Runtime with two additonal battery packs
(full/half load)
1hr11min/2hr30min
50min/1hr49min
1hr48min/3hr48min
1hr48min/3hr48min
50min/1hr46min
28min/1hr3min
20min/46min
COMMUNICATION AND MANAGEMENT
Interface Port
(1) USB, (1) Serial Communication
Management Software Included
(1) Serial Communication
(1) RJ-45 10/100 Base T Connection; (1) Serial Communcication
PowerChute Business Edition for Windows NT/2000/XP, Novell Netware, Solaris and Linux Red Hat, PowerChute
Plus for HP-UX and IBM-AIX (Smart-UPS RT 5000 also ships with PowerChute Network Shutdown)
Web/SNMP Management Card
optional
PowerChute Network Shutdown for Windows
NT/2000/XP, Novell Netware, Solaris, HP-UX,
Red Hat Linux and IBM AIX
included
PHYSICAL
Dimensions HxWxD (cm and inches)
7x43x56 cm, 3x17x22 in
13x43x66 cm, 5.1x17x26 in
2
3
6
61/69
120/140
244/284
U Height
Weight net/shipping (lbs)
26x43x66 cm, 10.4x17x26 in
ENVIRONMENT
Operating Conditions
3000 m max elevation; 0-95% non-condensing humidity; 0-40 (deg) C
Storage Conditions
15000 m max elevation; 0-95% non-condensing humidity; -20 to 60 (deg) C
< 45 db
< 55 db
APC Smart-UPS® RT is a family of high-density performance UPS for voice and data
UL-1778, FCC Part 15 Class B
UL-1778, FCC Part 15 Class A
networks, medical lab and light industrial applications. Double conversion on-line
Audible noise at 3 feet (1 m)
WARRANTY & CONFORMANCE
Approvals
Warranty
2 years, repair or replace, optional on-site warranties available, optional extended warranties available
topology protects your data by supplying reliable, network-grade power with scal-
ORDERING GUIDE
Tower Model Part #
Rack-mount Model Part #
SURTA1500XL
SURTA2000XL
SURTA3000XL
SURT3000XLT
SURT5000XLT
SURT7500XLT
SURT10000XLT
SURTA1500RMXL
SURTA2000RMXL
SURTA3000RMXL
SURT3000RMXLT
SURT5000RMXLT
SURT7500RMXLT
SURT10000RMXLT
able run time. An unlimited number of matching battery packs can be added
Tower Model Part # - 208/120V output
N/A
SURT3000XLT-1TF3
SURT5000XLT-1TF3
SURT7500XLT-1TF3
SURT10000XLT2TF3
to comply with aggressive runtime demands of “always-on” business critical
Rack-mount Model Part # - 208/120V output
N/A
SURT3000RMXLT1TF5
SURT5000RMXLT-1TF5
SURT7500RMXLT1TF5
SURT10000RMXLT2TF5
systems. Rack optimized models are an ideal choice for space constrained envi-
Tower Model with 1 additional Battery Pack
SURTA1500XL (+)
SURTA48XLBP
SURTA2000XL (+)
SURTA48XLBP
SURTA3000XL (+)
SURT192XLBP
SURT3000XLT (+)
SURT192XLBP
SURT5000XLT (+)
SURT192XLBP
SURT7500XLT (+)
SURT192XLBP
SURT10000XLT (+)
SURT192XLBP
ronments. With capacity up to 10 kVA in 6U, users can support power hungry blade
Rack-mount Model with 1 additional Battery
Pack
SURTA1500RMXL
(+)
SURTA48RMXLBP
SURTA2000RMXL (+)
SURTA48RMXLBP
SURTA3000RMXL
(+)
SURT192RMXLBP
SURT3000RMXLT (+)
SURT192RMXLBP
SURT5000RMXLT (+)
SURT192RMXLBP
SURT7500RMXLT
(+)
SURT192RMXLBP
SURT10000RMXLT
(+)
SURT192RMXLBP
servers or heavily loaded equipment racks. Customers looking for extremely tight
voltage and frequency regulation, internal bypass, and input power factor correction
will find them in the Smart-UPS RT.
APC’s quality
system is
certified by
ISO 9002
standards
For more information call:
Tel: 800 800 4APC - US & Canada
Tel: 401 789 0204 - World wide
APC Corporate
APC North America
132 Fairgrounds Road
West Kingston, RI
02892 USA
Call: 800 800 4APC
Fax: 401 789 3710
APC Latin America
5301 Blue Lagoon Drive
Suite #610
Miami, FL 33126 USA
Call: 305 266 5005
Fax: 305 266 9695
APC Europe
APC Ireland
Ballybrit Business Park
Galway, Ireland
Call: +353 91 702000
Fax: +353 91 756909
APC Asia Pacific
APC Australia
Level 13 The Denison
65 Berry Street
North Sydney, NSW 2060
Call: +61 2 9955 9366
Fax: +61 2 9955 2844
Visit: www.apc.com
E-mail: apcinfo@apc.com
Web Support: : support. apc.com
PowerFax™: 800-347-FAXX
©2004. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners. Specifications are subject to change without notice. PART# 996-2828D
Download PDF