Alpine | INE-W927HD | Owner`s manual | Alpine INE-W927HD Owner`s manual

01GB00INE-W927HD.book Page 1 Thursday, October 4, 2012 5:03 PM
R
EN
IN-DASH GPS NAVIGATION RECEIVER
INE-W927HD
FR
ES
This HD Radio receiver enables:
• OWNER’S MANUAL
Please read before using this equipment.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by
registering your product now at the following address: www.alpine-usa.com/registration.
You will be informed of product and software updates (if applicable), special promotions, news about
Alpine, and entered for a chance to win prizes.
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection de
votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :
www.alpine-usa.com/registration.
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des promotions
spéciales, de l’actualité d’Alpine, et vous aurez une chance de remporter des prix.
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,
registrándolo a través de la siguiente dirección: www.alpine-usa.com/registration.
Recibirá información sobre nuevos productos y software, promociones especiales, novedades sobre
Alpine y participará en el sorteo de premios.
Designed by ALPINE Japan
68-21057Z90-A
01GB01INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 2 Thursday, October 4, 2012 5:03 PM
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München,
Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
01GB02INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 3 Thursday, October 4, 2012 5:03 PM
ENGLISH
Contents
Operating Instructions
PRECAUTIONS
IMPORTANT INFORMATION ....................... 8
Settings When Switching Users ......................24
How to Input Characters and Numbers
(Keypad) ......................................................24
EN
Top banner and Bottom banner Fade Out
Setting ..........................................................25
Switching Sources ...........................................25
Screen Off Function .....................................25
Switching the Dual Screen Display ................25
FR
Touch Operation ..............................................26
WARNING
Selecting an Item in a List ..............................26
About the Indicator Display ............................26
Points to Observe for Safe Usage ..................... 8
WARNING ................................................. 9
Radio/HD Radio™/RBDS
CAUTION .................................................. 9
Listening to the Radio .....................................27
NOTICE ................................................... 10
Presetting Stations Manually ..........................28
Discs Playable on This Unit ................. 11
Presetting Stations Automatically ...................28
Features
Auto User Setting Change .............................. 15
Tuning to Preset Stations ................................28
Forced Analog Mode ......................................28
My Favorites ................................................... 15
Receiving a Multicast
(HD Radio mode only) ................................28
Easy Sound Setting by Car Type
(i-Personalize) ............................................. 16
PTY (Program Type) Tuning
(Analog Broadcasts only) ............................28
About Dual Screen ......................................... 16
Dual Screen Display Position ..................... 17
Displaying Radio Text ....................................29
Getting Started
Accessory List ................................................ 18
Location of Controls ...................................... 18
Storing the Tag Information
(HD Radio mode only) ................................29
About the Feature Logos .................................29
CD/MP3/WMA/AAC
Turning Power On or Off ............................... 18
Playback ..........................................................30
Turning the System On ................................... 19
Repeat Play .....................................................30
Initial System Start-Up ................................... 19
M.I.X. (Random Play) ....................................30
Inserting/Ejecting a Disc ................................ 19
Inserting the Disc ........................................ 19
Removing the Disc ...................................... 19
Adjusting the Monitor Viewing Angle ........... 19
Selecting Folders
(Concerning MP3/WMA/AAC) ..................31
Adjusting the Volume ..................................... 20
Lowering Volume Quickly ............................. 20
Using My Favorites ........................................ 20
User Registration ............................................ 20
Setting My Favorites ...................................... 21
Adding My Favorites .................................. 21
Editing My Favorites .................................. 22
Displaying the Camera Image ..................... 23
i-Personalize Setup ..................................... 23
Searching from CD Text .................................31
File/Folder Name Search
(Concerning MP3/WMA/AAC) ..................31
About MP3/WMA/AAC .................................31
DVD
Playing a Disc .................................................34
If a Menu Screen Appears ...........................34
Numeric Keypad Input Operations ..............35
Displaying the Top Menu Screen ................35
Displaying the Menu Screen .......................35
3-EN
01GB03INE-W927HDTOC.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 4 Thursday, October 4, 2012 5:03 PM
Stopping Playback (PRE STOP) .................... 35
Stopping Playback .......................................... 35
Fast-forwarding/Fast-reversing ....................... 35
Finding the Beginnings of Chapters/Tracks/
Files ............................................................. 35
Playing Still Frames (Pausing) ....................... 36
Forward frame-by-frame Playback ................. 36
Slow Motion Playback .................................... 36
Selecting Folders ............................................ 36
Repeat Playback ............................................. 36
Adjusting Brightness ................................... 42
Adjusting Color of Picture .......................... 42
Adjusting Tint of Picture ............................. 42
Adjusting Image Contrast ........................... 43
Adjusting Picture Quality ............................ 43
Saving and Calling the Adjusted Picture
Quality ..................................................... 43
About INE-W927HD ...................................... 43
Displaying the Product Information ............ 43
Checking the DivX® Registration ............... 43
Initializing the System ................................. 43
Installation Setup ............................................ 43
Searching by Title Number ............................. 36
Searching Directly by Chapter Number ......... 37
Sound Setup
Searching for a Desired Video File ................. 37
Sound Setup Operation ................................... 44
Switching the Angle ....................................... 37
Setting the Balance/Fader/Subwoofer ............ 44
Adjusting the Balance/Fader ....................... 44
Rear Speaker Setting ................................... 44
Turning Subwoofer ON/OFF ...................... 44
Adjusting the Subwoofer Level ................... 45
Setting the Subwoofer Phase ....................... 45
Setting the MX (Media Xpander) ................... 45
Switching the Audio Tracks ........................... 37
Switching the Subtitles
(Subtitle Language) ..................................... 37
About DivX® .................................................. 38
Setup
Setup Operation
General Setup
General Setup Operation ................................ 39
Language Setting ............................................ 39
Setting the Scroll ......................................... 39
Format Settings ........................................... 40
Setting the Menu Language ........................ 40
Remote Sensor Setting .................................... 40
Setting Top banner and Bottom banner
Display ........................................................ 40
Screen/LED Customize .................................. 40
Setting the Brightness of the
Backlighting ............................................. 40
Adjusting the Minimum Level of
Backlight .................................................. 40
Adjusting the Dimmer of Button Lighting at
Night ........................................................ 41
Switching the Display Color ....................... 41
Adjusting the Touch Panel .......................... 41
Initializing the Touch Panel Corrected
Values ....................................................... 41
Visual Setting .................................................. 41
Switching Display Modes ........................... 42
Adjusting the Live Contrast ........................ 42
Selecting the Visual EQ Mode
(Factory’s Setting) .................................... 42
Equalizer Presets (Bass Max EQ) ................... 45
Adjusting the Parametric Equalizer Curve
(Parametric EQ) ........................................... 46
Adjusting the Time Correction
(Time Correction) ........................................ 46
Adjusting the Crossover Settings
(X-OVER) ................................................... 47
Setting Defeat ................................................. 47
Volume Setting ............................................... 47
Setting the Volume for Each Source ............... 47
About Time Correction ................................... 48
About the Crossover ....................................... 49
Source Setup
Source Setup Operation .................................. 49
Source Layout Setting .................................... 50
Disc Setting ..................................................... 50
Changing the Language Setting .................. 50
Setting of the DVD Menu Language ........... 50
Setting of the Audio Language ................... 50
Setting of the Subtitle Language ................. 50
Changing the Country Code Setting ........... 50
Setting the Rating Level (Parental Lock) .... 51
Setting the TV Screen Mode ....................... 51
Sirius XM Setting ........................................... 52
Managing Artist, Song and Sports Team
Alerts ........................................................ 52
4-EN
01GB03INE-W927HDTOC.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 5 Thursday, October 4, 2012 5:03 PM
Setting the Favorite Sports Team Alerts ...... 52
Setting the Parental Lock ............................ 53
Signal Strength Information ........................ 53
AUX Setting ................................................... 53
Setting the AUX Mode ................................ 53
Setting the Primary AUX Name
(AUX Setup) ............................................ 54
Setting the AUX3 ........................................ 54
Setting the AUX3 Sel. (Switching the Visual
Input Signal System) ................................ 54
RSE Setting ..................................................... 54
Setting the Rear Seat Entertainment
System ...................................................... 54
Setting the BLUETOOTH Pandora® .............. 54
BLUETOOTH Setup
BLUETOOTH Setup Operation ..................... 55
BLUETOOTH Setting .................................... 55
Displaying BLUETOOTH Information .......... 55
Registering the BLUETOOTH Device ........... 55
Automatic Connection Setting ........................ 56
Setting the Passcode ....................................... 56
Changing the Character Code of the Phone
Book ............................................................ 56
Setting Received Calls Automatically ............ 56
Setting the Time for Automatic Reception of a
Call .............................................................. 57
Selecting the Output Speaker ......................... 57
Hands-Free Phone Control
Connecting a BLUETOOTH Device .............. 61
Disconnecting the BLUETOOTH
Connection ............................................... 61
Changing the connecting BLUETOOTH
Device .......................................................... 62
Answering a Call ............................................ 62
Adjusting Ringtone Volume ........................ 62
Hanging up the Telephone .............................. 62
Calling ............................................................ 62
Using Short Cut Dialing to Make a Call ..... 62
Dialing a Number in Call History ............... 62
Dialing a Number in the Phone Book ......... 63
Entering a Phone Number to Make a
Call ........................................................... 63
Redial Function ........................................... 63
Operations During a Conversation ................. 63
Adjusting the Speech Volume ..................... 63
Changing the Voice Output ......................... 63
DTMF (Touch-Tone) Function .................... 63
Phone Book Function ..................................... 63
Synchronizing the Phone Book ................... 63
Adding the Phone Book .............................. 64
Deleting the Phone Book Entries ................ 64
Assigning as a Short Cut Dialing Number ..... 64
Call Waiting Function ..................................... 65
BLUETOOTH Audio
Adjusting the Ring Tone Volume ................... 57
Playback .......................................................... 65
Adjusting the Microphone Level .................... 57
Repeat Play ..................................................... 66
Adjusting the Caller Volume .......................... 57
M.I.X. (Random Play) .................................... 66
Deleting All the Histories ............................... 57
Selecting Groups ............................................. 66
Search Function .............................................. 66
Camera Setup
Camera Setup Operation ................................. 58
Direct Camera Setting .................................... 58
Setting the Camera Input ............................. 58
AUX Camera Setting ...................................... 59
Setting the Camera Input ............................. 59
Camera Interrupt Setting
(Power OFF Mode) ..................................... 60
BLUETOOTH Operation
Setup Before Using ......................................... 61
About BLUETOOTH .................................. 61
About the Hands-Free Phone ...................... 61
Before Using BLUETOOTH ....................... 61
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) ........ 66
Operating an External DVD Player ................ 67
Change to the External DVD Mode ............ 67
About the DVD Operation Screen ............... 67
Operating an External DVD Changer ............. 68
Change to the External DVD Changer
Mode ........................................................ 68
About the DVD Changer Operation
Screen ...................................................... 68
Operating the Mobile Digital TV Receiver
(DVB-T) ...................................................... 68
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode ........................................ 68
About the DVB-T Operation Screen ........... 69
5-EN
01GB03INE-W927HDTOC.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 6 Thursday, October 4, 2012 5:03 PM
Operating a TV ............................................... 69
Change to the TV Mode .............................. 69
About the TV Operation Screen .................. 69
Camera Operation (Optional)
Rear Camera Operation .................................. 70
Displaying the Rear View Video while the Car
is in Reverse ............................................. 70
Switching the Image Pattern for the Rear
Camera ..................................................... 70
Guide Display ON/OFF Setting .................. 70
Adjusting the Caution Display Location ..... 70
About the Rear Camera Guide ........................ 71
Front Camera Operation ................................. 72
Displaying the Front View Video
Manually .................................................. 72
Switching the Image Pattern for the Front
Camera ..................................................... 72
About the Adjustment of Guide Display ON/
OFF Setting and Adjustment of Caution
Display Location ...................................... 73
Other Camera Operation ................................. 73
About the Adjustment of the Caution Display
Location ................................................... 73
SiriusXM Satellite Radio (Optional)
Receiving Channels with the SiriusXM
Tuner ........................................................... 74
Tuning Channels by Category ........................ 74
Changing the Display ..................................... 74
Searching for a Desired Song ......................... 79
File/Folder Name Search ............................. 79
Tag Search ................................................... 79
Direct Up/Down Function .............................. 80
Select the Desired Folder (Folder up/down) ... 80
iPod/iPhone (Optional)
Playback .......................................................... 82
Searching for a Music File .............................. 82
Searching for a Desired Video File ................. 82
Alphabet Skip Function .................................. 83
Direct Up/Down Function .............................. 83
Search Position Memory ................................ 83
Repeat Play ..................................................... 83
Random Play (Shuffle) ................................... 83
Random Play (Shuffle All) ............................. 83
Pandora® internet radio (optional)
Listening to Pandora® .................................... 84
iPhone Pandora® ......................................... 84
BLUETOOTH Pandora® ............................. 84
“Thumbs” Feedback ....................................... 85
Searching for a Desired Station ...................... 85
Creating a New Station ................................... 85
QuickMix ........................................................ 85
Bookmarking a Desired Track or Artist ......... 86
Information
Checking the SiriusXM Radio ID Number .... 75
Product Software Update ................................ 87
Storing Channel Presets .................................. 75
About DVDs ................................................... 87
Tuning Channels Using Presets ...................... 75
List of Language Codes .................................. 88
Search Function .............................................. 75
List of Country Codes ..................................... 89
Selecting the Channel Directly ....................... 76
In Case of Difficulty ....................................... 91
Storing the Desired Song/Artist ...................... 76
If this Message Appears ................................. 92
Receiving and Tuning to an Alert ................... 76
Specifications .................................................. 94
Replay Function .............................................. 76
Parental Lock Function ................................... 77
END USER LICENSE AGREEMENT
(Microsoft) .................................................. 95
Using Jump Memory and Jump Recall
Function ....................................................... 77
END USER LICENSE AGREEMENT
(NAVTEQ) .................................................. 96
Storing the Tag Information ............................ 77
USB Memory (Optional)
Playback .......................................................... 78
Repeat Play ..................................................... 78
Random Play (M.I.X.) .................................... 79
Random Play (M.I.X. ALL) ........................... 79
6-EN
01GB03INE-W927HDTOC.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 7 Thursday, October 4, 2012 5:03 PM
Installation and
Connections
Warning .................................................. 97
EN
Caution ................................................... 97
Precautions ............................................ 97
Installation ...................................................... 98
FR
Connections .................................................. 101
System Example ........................................... 103
LIMITED WARRANTY
ES
7-EN
01GB03INE-W927HDTOC.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 8 Thursday, October 4, 2012 5:03 PM
Operating Instructions
PRECAUTIONS
IMPORTANT INFORMATION
PLEASE READ CAREFULLY BEFORE USING THIS
PRODUCT
This product is intended to provide turn by turn instructions to
get you to a desired destination. Please make certain that all
persons using this navigation system carefully read these
precautions and the following instructions fully.
• This product is not a substitute for your personal judgment. Any
route suggestions made by this navigation system may never
supersede any local traffic regulations or your personal judgment
and/or knowledge of safe driving practices. Do not follow route
suggestions if the navigation system instructs you to perform an
unsafe or illegal maneuver, places you in an unsafe situation, or
routes you into an area which you consider unsafe.
• Glance at the screen only when necessary and safe to do so. If
prolonged viewing of the screen is necessary, pull over in a safe
and legal manner and location.
• Do not input destinations, change settings, or access any
functions requiring a prolonged view of the monitor and/or
remote control while you are driving. Pull over in a safe and
legal manner and location before attempting to access the
system.
• Do not use the navigation system to route you to emergency
services. Not all locations of emergency services such as police
and fire stations, hospitals and clinics are contained in the
database. Please use your own judgment and ask for directions in
these situations.
• The map database used in the navigation system is the most
recent map data available at the time of production. Because of
changes in streets and neighborhoods, there may be situations
where the navigation system is not able to route you to your
desired destination. In these cases, use your own judgment.
• The map database is designed to provide you with route
suggestions and does not take into account the relative safety of a
suggested route or of factors which may affect the time required
to reach your destination. The system does not reflect road
closures or construction, road characteristics (i.e. type of road
surface, slope or grade, weight or height restrictions, etc.), traffic
congestion, weather conditions, or any other factors which may
affect the safety or timing of your driving experience. Use your
own personal judgment if the navigation system is unable to
provide you with an alternate route.
• There may be situations where the navigation system displays
the vehicle’s location erroneously. Use your own driving
judgment in this situation, taking into account current driving
conditions. Please be aware that in this situation the navigation
system should correct the vehicle’s position automatically.
However, there may be times where you may have to correct the
position yourself. If this is the case, pull over in a safe and legal
manner and location before attempting operation.
• Make certain that the volume level of the navigation system is set
to a level which still allows you to hear outside traffic and
emergency vehicles.
If there is anything in the manual about the operation of
the navigation system which you are uncertain about,
please contact your local Alpine authorized navigation
dealer or Alpine at 1-888-NAV-HELP (1-888-628-4357)
before using the navigation system.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide more reasonable
protection against harmful interference in a residential
installation, and are more stringent than “outdoor” requirements.
Operation is subjected to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult an experienced radio/TV technician.
WARNING
Points to Observe for Safe Usage
• Read this manual carefully before using this disc and the system
components. They contain instructions on how to use this
product in a safe and effective manner. Alpine cannot be
responsible for problems resulting from failure to observe the
instructions in this manual.
• This manual uses various pictorial displays to show you how to
use this product safely and to alert you to potential dangers
resulting from improper connections and operation. Following
are the meanings of these pictorial displays. It is important to
fully understand the meanings of these pictorial displays in order
to use this manual and the system properly.
8-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 9 Thursday, October 4, 2012 5:03 PM
DO NOT DISASSEMBLE OR ALTER.
WARNING
• Operation of the system while driving is dangerous. Users
should stop vehicle before operating the software.
• Road conditions and regulations take precedence over
information contained on the map display: observe actual
traffic restrictions and circumstances while driving.
• This software is designed for use exclusively in the
INE-W927HD. It cannot and may not be used in conjunction
with other hardware.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous for the driver to watch TV/Video while driving a
vehicle. Installing this product incorrectly enables the driver to
watch TV/Video while driving. This may cause a distraction,
preventing the driver from looking ahead, thus causing an accident.
The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
DO NOT FOLLOW ROUTE SUGGESTIONS IF THE
NAVIGATION SYSTEM INSTRUCTS YOU TO PERFORM AN
UNSAFE OR ILLEGAL MANEUVER, OR PLACES YOU IN AN
UNSAFE SITUATION OR AREA.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
EN
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
FR
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
ES
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
This product is not a substitute for your personal judgment. Any
route suggestions by this system should never supersede any local
traffic regulations or your personal judgment or knowledge of safe
driving practice.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
9-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 10 Thursday, October 4, 2012 5:03 PM
NOTICE
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
New Discs
To prevent the disc from jamming, “Disc error” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Center Hole
New Disc
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
Damaged Disc
Installation Location
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Make sure the INE-W927HD will not be installed in a location
subjected to:
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“Disc error” will be displayed on your player if you insert a disc
incorrectly. If “Disc error” continues to be displayed even though
the disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
10-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 11 Thursday, October 4, 2012 5:03 PM
Discs Playable on This Unit
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause operational problems. We recommend
not using these accessories on discs played in Alpine DVD players.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
DVD Video
Transparent Sheet
Recorded Content
Disc size
Audio + Video
12 cm*
FR
Disc Stabilizer
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the INE-W927HD.
This has been done for the safety of the driver and passengers.
Setup operations cannot be made if the car is moving. The car must
be parked and the parking brake must be engaged for the procedure
described in the Owner’s Manual to be valid. The warning “Unable
to operate while driving.” will be displayed if any attempts are
made to perform these operations while driving.
Music CD
Audio
12 cm
ES
DivX®
Audio + Video
12 cm
* Two-layer DVD disc compatible
• The INE-W927HD draws minimal current even when its power
switch is turned off. If the switched power (ignition) lead of the INEW927HD is connected directly to the positive (+) post of the
vehicle’s battery, the battery may be discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be
added to simplify this procedure. Then, you can simply place it in the
OFF position when you leave the vehicle. Turn the SPST switch back
ON before using the INE-W927HD. For connecting the SPST switch,
refer to the “Connection Diagram of SPST Switch (sold separately)”
(page 100). If the power (ignition) lead is unswitched, it must be
disconnected from the battery post should the vehicle be left unused
for an extended period of time.
EN
The formatted discs listed below can be played on this unit.
CD-R/
CD-RW
DVD-R/
DVD+R/
DVD-RW DVD+RW
CD Format
MP3 Format (“mp3”)
WMA Format (“wma”)
AAC Format (“aac,” “m4a”)
DVD Video Format
DivX Format (“avi,” “divx”)
• Discs that are not finalized cannot be played back.
11-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 12 Thursday, October 4, 2012 5:03 PM
Discs that cannot be played
Tips for making your own discs
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/
AAC files), photo CDs, etc.
The INE-W927HD plays DVD Video, DivX®, Audio CD and has a
built in MP3/WMA/AAC decoder.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 1
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
ALL
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA/AAC files written in a format
compliant with this unit. For details, see pages 31 and 32.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA/AAC encoded CD-R/
RW files).
What is the difference between an Audio and MP3/WMA/AAC
CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG Audio Layer 3)/
WMA (Windows Media Audio)/AAC (Advanced Audio Coding) is
a data file that uses a compression scheme to reduce the size of the
music file*.
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD.
* If the first session on a disc containing both CD-DA data and
MP3/WMA/AAC data is a CD-DA file, only CD-DA files will
be played.
Properly formatted MP3/WMA/AAC Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2
(32 characters) or Joliet (Windows or Macintosh long filenames)
file naming conventions*.
* Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
12-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 13 Thursday, October 4, 2012 5:03 PM
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
• This unit is compatible with discs recorded in the standard
DVD-Video format.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Disc terminology
Title
If titles are programed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
Protecting the USB connector
• Only an iPod/iPhone, USB memory or Nokia Phone can be
connected to the USB connector on this unit. Correct
performance using other USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
• The audio file format that can be played back on the unit is MP3/
WMA/AAC.
• The video file format that can be played back on the unit is
DivX®.
• Artist/song name, etc., can be displayed. Certain, special
characters may not be correctly displayed.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.,
is lost while using this product.
EN
On Handling USB Memory
• This unit can control a memory storage device that supports the
USB Mass Storage Class (MSC) protocol. Playable audio file
formats are MP3, WMA and AAC.
• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement. Read the USB memory
Owner’s Manual thoroughly.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the USB memory in a location where driver operation will
not be hindered.
• USB memory may not function correctly at high or low
temperature.
• Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or
state.
• Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
• Files protected by DRM (Digital Rights Management), cannot
be played back on this unit. These include AAC formatted files
purchased from the iTunes Store and WMA or other files with
some form of copyright protection.
• USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3,” “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
13-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 14 Thursday, October 4, 2012 5:03 PM
• This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property rights
of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
• Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
• Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• iPhone, iPod, iPod classic, iPod nano, iPod touch, and iTunes
are trademarks of Apple Inc., registered in the U.S. and other
countries.
• “Made for iPod,” and “Made for iPhone,” mean that an
electronic accessory has been designed to connect specifically to
iPod, or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of
this accessory with iPod, or iPhone may affect wireless
performance.
• Pandora, the Pandora logo, and the Pandora trade dress are
trademarks or registered trademarks of Pandora Media, Inc.,
used with permission. Pandora is currently available exclusively
in the United States. This device will control Pandora when
connected to a compatible iPhone that has access to the internet
and the latest version of the Pandora® application installed.
(Search for “Pandora” in the Apple iTunes App Store to find and
install the most current version.)
• HD Radio Technology manufactured under license from iBiquity
Digital Corporation. U.S. and Foreign Patents. HD Radio™ and
the HD, HD Radio, and “Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
• SIRIUS, XM and all related marks and logos are trademarks of
SIRIUS XM Radio Inc. and its subsidiaries. All rights reserved.
• This device will control Pandora when connected to a
compatible Android™ or BlackBerry® phone that has Bluetooth,
access to the internet, and the latest version of the Pandora®
application installed.
• BlackBerry®, RIM®, Research In Motion®, SureType® and
related trademarks, names and logos are the property of
Research In Motion Limited and are registered and/or used in
the U.S. and countries around the world. Used under license
from Research In Motion Limited.
• DivX®, DivX Certified® and associated logos are trademarks of
Rovi Corporation or its subsidiaries and are used under license.
• The BLUETOOTH® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Alpine Electronics, Inc. is under license.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com”
©2011 NAVTEQ. All rights reserved.
Portions ©2011, Microsoft Corporation. All Rights Reserved.
Android is a trademark of Google Inc.
14-EN
01GB04INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 15 Thursday, October 4, 2012 5:03 PM
Features
Auto User Setting Change
EN
With the INE-W927HD, you can register up to two users.
Each user can configure their own preferred settings.
By registering their respective BLUETOOTH devices to the unit, each user can be identified automatically.
USER1
FR
USER2
USER2
ES
USER1
• For details of how to register a BLUETOOTH device, refer to “User Registration” (page 20).
• If USER2 is recognized while USER1 is using the system, a confirmation message is displayed.
• If no BLUETOOTH device has been registered or if you want to switch users manually, users can be switched by pressing and holding the
Favorites) button.
• For details of which settings are affected by switching users, refer to “Settings When Switching Users” (page 24).
(My
My Favorites
Up to eight My Favorites can be registered as shortcut keys for each registered user.
Frequently used functions and handy functions can be customized for your convenience.
USER1
USER2
For details of how to register or add My Favorites, how to change the name, etc., refer to “Using My Favorites” (page 20).
15-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 16 Thursday, October 4, 2012 5:03 PM
Easy Sound Setting by Car Type (i-Personalize)
Car Specific Sound Setup
This function lets you set and reproduce the best audio environment for the environment in your car.
On the unit, select and set the car category/steering wheel position/speaker type and size/seat material.
For details of how to configure the settings, refer to “Car Specific Sound Setup” (page 23).
Display example when setting is completed
About Dual Screen
If you want to display the music playback screen while route guidance is displayed, etc., you can display the Navigation and Audio/Visual screens
simultaneously.
Navigation Full screen
Touch the Navigation screen portion.
or
Press the
(MAP) button.
Dual Screen
Touch
Audio/Visual Full screen
Touch
*1
or
Press the
(SOURCE) button.
*1 During video playback, [Dual Wide], [Dual Full] and [Full Screen] appear on the screen for selecting the screen size. For details, refer to
“Switching the Dual Screen Display” (page 25).
16-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 17 Thursday, October 4, 2012 5:03 PM
Dual Screen Display Position
You can switch the right and left screens using drag & drop.
To switch the screens, touch the middle of the screen you want to move and drag it to the desired display position. The screens will switch positions
when you remove your finger.
EN
FR
ES
17-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 18 Thursday, October 4, 2012 5:03 PM
button
Getting Started
Recalls the Open/Tilt screen. Executes display open/close,
angle adjustment, and disc eject.
RESET switch
The system of this unit is reset.
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
INE-W927HD .......................................................................1
Power cable.........................................................................1
Flush head screw (M5×8)....................................................6
Screw (M5×8) ......................................................................8
GPS Antenna .......................................................................1
Antenna mounting plate ......................................................1
Cable clamp ........................................................................3
AUX/PRE OUT cable ...........................................................1
Camera cable ......................................................................1
USB extension cable ...........................................................1
iPod/iPhone Connection Cable............................................1
iPod VIDEO AV extension cable ..........................................1
Microphone..........................................................................1
Mounting sleeve ..................................................................1
Face plate............................................................................1
Bracket key..........................................................................2
Owner’s Manual ..............................................................1set
Location of Controls
Remote Sensor
Point the remote control transmitter towards the remote
sensor within a range of 2 meters.
Optional Remote Control Interface Box
This unit is operable using the vehicle’s secondary radio controls.
An Alpine Remote Control Interface Box (optional) is required. For
details, contact your Alpine dealer.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote control sensor.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in
bold (e.g.
(My Favorites)). The buttons found on the
touch-screen display are shown in bold within brackets, [ ]
(e.g. [ ]).
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake and footbrake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last mode screen that
was displayed before the ignition key was turned off. For
example, if the unit is in radio mode when ignition is turned off,
it will remain in radio mode when ignition is turned back on.
(MUTE) button
Press to activate /deactivate the mute mode.
Press and hold MUTE for at least 3 seconds to activate the
“Setting the Balance/Fader/Subwoofer” mode.
/
(UP/DOWN)button
2
Press and hold the
(SOURCE) button for at
least 3 seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The INE-W927HD is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.
Press to adjust the volume.
(SOURCE) button
Displays the Audio/Visual screen. If the Audio/Visual screen
is already displayed, changes the source.
Press and hold for at least 3 seconds to turn the power off.
(PHONE) button
Recalls the Telephone Menu screen.
When a hands-free phone is connected, press and hold for
at least 3 seconds to switch to the call history screen.
(My Favorites) button
The My Favorites screen for registered User 1 is displayed.
Press and hold this button at least 3 seconds to switch to
User 2.
(MAP) button
Recalls the navigation map screen.
For details of navigation operations, refer to “Navigation
System OM” in the CD-ROM.
18-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 19 Thursday, October 4, 2012 5:03 PM
Turning the System On
3
Insert the disc with the label side facing up.
Disc Slot
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
SD memory
card slot*
When the system is used for the first time, the
language selection menu is displayed. There are 21
languages to choose from. Touch [ ] or [ ] to
scroll the list, and then touch the desired language.
Insert the disc until it is automatically pulled into the unit.
The unit starts to play the disc.
* The SD memory card does not support Music/Video playback.
For details on how to use SD memory cards, refer to “Navigation
system OM” on the supplied CD-ROM.
• Insert the SD memory card into the slot until it is locked.
If the SD memory card is not inserted properly, the monitor cannot be
closed.
• You can also scroll through lists by touching the screen and
sliding your finger up and down.
2
Touch [OK].
The radio screen is displayed.
• Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
Removing the Disc
1
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
2
(Eject).
The Open/Tilt screen is displayed.
2
Touch [
Disc].
The monitor will open. Then the disc is ejected.
When the disc has been ejected part way, take it out.
3
Initial System Start-Up
Press
Touch [Close], or press
(Eject).
• If the disc does not eject after touching [ Disc], press and hold
(Eject) for at least 5 seconds.
• Do not apply shock to the monitor when it is open as it may result in
malfunction of the unit.
• The monitor will stop at the set tilt angle when closing.
Turn off the unit power.
CAUTION
Press RESET switch with a ballpoint pen or similar
pointed object.
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
monitor tends to become very warm under normal operating
conditions. This is not a malfunction, but care should be taken to
avoid prolonged contact with it.
RESET switch
Adjusting the Monitor Viewing Angle
Inserting/Ejecting a Disc
Inserting the Disc
1
Press
(Eject).
Adjust the monitor’s angle for better visibility.
1
(Eject).
The Open/Tilt screen is displayed.
2
The Open/Tilt screen is displayed.
2
Press
Touch [ Up] or [ Down] of “Tilt” to adjust the
desired monitor angle.
The monitor angle can be adjusted in 5 stages.
Touch [Open].
3
Touch [
] to return to the normal mode.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.
19-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 20 Thursday, October 4, 2012 5:03 PM
Adjusting the Volume
Adjust the volume by pressing
or
.
Volume decreases/increases continuously by pressing and
holding
or
.
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press
User Registration
You can register up to two users. Configure the User 1 and User 2
settings for each user.
1
Press the
(My Favorites) button.
The My Favorites screen is displayed.
2
Touch [Start].
(MUTE) to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing
(MUTE) again will bring the audio back
to its previous level.
Using My Favorites
The user name input screen for the first user is displayed.
• Touching [Skip] registers the user name as “USER 1” or
“USER 2” and no BLUETOOTH device is registered. In this
case, the users will not be switched automatically.
• Touching [Cancel] or pressing the
(My Favorites) button
returns to the original screen without registering a user.
Display example of My Favorites screen
3
User name: Displays the name of the user
My Favorites icon: Touching an icon on My Favorites
screen will switch to the screen for the selected
application.
Add button: Use to add (register) My Favorites icons
(page 21)
Edit button: Use to edit My Favorites (page 22)
Camera button: Use to display the camera image
(page 23)
i-Personalize button: Use to configure the i-Personalize
Setup (page 23)
Input the user name from the keypad and touch
[OK].
The BLUETOOTH Device Setup screen is displayed.
• Touch [
] to edit the name.
For details of how to input characters from the keypad, refer to
“How to Input Characters and Numbers (Keypad)” (page 24).
4
Touch [Link], then touch [OK].
The BLUETOOTH Device List is displayed.
• The BLUETOOTH devices registered here are used to
automatically identify the user.
Also, a cellular phone can be used as a hands-free phone.
For details, see “BLUETOOTH Setting” (page 55).
• Touching [Do not Link] exits user registration without
registering a BLUETOOTH device.
20-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 21 Thursday, October 4, 2012 5:03 PM
5
Touch [Search].
Adding My Favorites
You can register up to eight My Favorites for each user.
You cannot, however, register the same items (categories).
1
Touch [
].
EN
The addition items (categories) are displayed.
2
Touch the desired addition item (category).
The system starts searching for BLUETOOTH devices.
When the search is completed, the BLUETOOTH Device
List is displayed.
• Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to “ON.”
6
Touch a registered BLUETOOTH device and touch
[OK].
My Favorites screen for USER1 is displayed.
• You can edit My Favorites icons.
For details of how to add, edit, delete or set My Favorites icons,
refer to “Adding My Favorites” (page 21).
Register User 2
7
Press the
(My Favorites) button.
The My Favorites screen is exited and the display returns to
the original screen.
8
FR
Press and hold the
least 3 seconds.
(My Favorites) button for at
The My Favorites user guide is displayed. Repeat steps 2
through 6 to register USER2.
Setting My Favorites
Configure the My Favorites settings.
Press the
(My Favorites) button.
My Favorites screen for USER1 is displayed.
ES
Current position : Registers your current position in My Favorites
Current source : Registers the audio source currently playing in My
Favorites
Navigation : Registers the destination search category or nearby place
search category in My Favorites
[Specific Place] : You can display the places registered in
My Favorites and set your destination.
Search for a place registered in My Favorites by Address/
Find Place/Address Book/History, then touch Add.
[Quick Place search] : Displays the address search keypad
[Help Nearby] : Displays the nearby search screen
[POI category] : Displays the selected POI category list
• For details of navigation operations, refer to “Navigation System
OM” in the CD-ROM.
Phone : Lets you register phone numbers registered in the phonebook in
My Favorites for shortcut dialing.
Select a name or phone number from the Phonebook list and touch
[ADD].
• Touch [ ] or [ ] to switch phone numbers.
• You can only select PHONE when a mobile phone is connected.
Audio/Visual : Lets you switch directly to an audio source
[Radio]:
HD Radio/RBDS: You can register presets No. 1-6 in FM1/
FM2/AM.
Select presets No. 1-6 from FM1 preset/
FM2 preset/AM preset.
SiriusXM:
You can register presets No. 1-6 in
SiriusXM1, SiriusXM2 and SiriusXM3.
Select presets No. 1-6 from SiriusXM1
preset/SiriusXM2 preset/SiriusXM3 preset.
[Disc]/[USB/iPod]/[Pandora]/[BLUETOOTH Pandora]/[Aux1]/[Aux-2]/[Aux-3]/[BT audio]:
You can switch directly to any of these audio sources.
• To configure My Favorites settings for USER2, press and hold the
(My Favorites) button for at least 3 seconds. The My Favorites
screen is displayed.
21-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 22 Thursday, October 4, 2012 5:03 PM
Editing My Favorites
You can delete names in My Favorites or change the layout.
Touch [
“
].
” appears and the mode switches to the Edit mode.
Changing the User Name
1
Touch the [Name] of the user you want to change.
The Input User Name screen (Keypad) is displayed.
2
Input the name and touch [OK].
The user name is changed.
• For details of how to input characters using the keypad, refer to
“How to Input Characters and Numbers (Keypad)” (page 24).
Changing a BLUETOOTH device
You can change the BLUETOOTH devices associated with a user.
1
Touch the user [Phone] you want to change.
The BLUETOOTH Device Setup screen is displayed.
2
Changing the name
1
Touch the icon you want to change
3
The Edit Text screen (Keypad) is displayed.
2
Select the device you want to change and touch
[OK].
The device is changed.
Enter the name and touch [OK]
Deleting Registered Users
The mode returns to the Edit mode.
3
Touch [Link], then touch [OK].
The BLUETOOTH Device list is displayed.
• The BLUETOOTH devices set by User Registration are
highlighted.
For detailed settings, touch [Search].
• Touching [Cancel] returns to the previous screen without executing
any changes.
Touch [OK].
1
The name is changed.
Touch [Delete] for the user name you want to
delete.
The confirmation message is displayed.
Deleting Icons
1
2
Touch “
2
” by the icon you want to delete
The confirmation message is displayed.
Touch [OK].
Changing the Layout
The mode returns to the Edit mode.
3
Touch [OK].
• When a registered user is deleted, all the items affected by switching
users are returned to the default settings.
Touch [OK].
You can change the layout of the shortcut keys.
1
Drag and drop the icon to the desired location.
2
Touch [OK].
My Favorites setup
You can change or delete the registered user name or change the
registered phone number.
Touch [Setup].
The My Favorites Setup screen is displayed.
22-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 23 Thursday, October 4, 2012 5:03 PM
8
The settings confirmation screen is displayed.
• If the car seats are made of both leather and fabric, select [Half
leather].
Displaying the Camera Image
When a separately purchased camera is connected to the system, you
can display the camera image.
Select the material of the car seats.
9
Check the settings and touch [OK].
EN
Touch [Camera].
The camera image is displayed.
• For details of camera operations, refer to “Camera Operation
(Optional)” (page 70).
• When the front camera (direct camera) and rear camera or side
camera (AUX camera) are connected simultaneously, the screen for
selecting which camera image to display appears.
FR
i-Personalize Setup
You can configure the audio settings by car type.
Touch [i-Personalize].
The i-Personalize Setup screen is displayed.
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
• The Easy sound settings are reflected in the following Audio Setup
items.
Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-OVER) (only when
Subwoofer is set to “On”)
The Equalizer Presets (Bass Max EQ) settings are disabled.
Downloaded Sound Settings
Using a USB memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-OVER
and Parametric EQ settings.
Car Specific Sound Setup
You can set and reproduce the best audio environment for the
environment in your car.
1
Setting item: Downloaded Sound Settings
The file name of download data shall be “A_U*****.MP3.”
Touch [Car Specific Sound Setup].
Extender (fixed)
The vehicle type selection screen is displayed.
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
• Save the setting data in the root folder.
• For details about procedures of download, see ALPINE’s web site.
1
Touch [Downloaded Sound Settings].
Setting data files are displayed in a list with a maximum of 5
items.
2
Touch the relevant Vehicle type.
• The selected Vehicle type is reflected in the “i-Personalize”
symbol on My Favorites screen.
3
4
5
6
Touch the position of the driver’s seat.
Touch the size of the front speaker.
Select whether or not there is a tweeter.
Select the installation position of the rear speaker.
2
3
Touch the desired file.
Touch [OK].
The downloaded setting values are set as the Time
Correction/X-OVER/Parametric EQ settings, and at the
same time saved as Preset3, respectively.
• When no USB memory is connected, the “iPersonalize Setting”
function is not available.
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
If you select “No rear speaker,” you cannot adjust the rear
speaker in Fader/Time Correction/X-OVER in sound setup.
7
Select whether or not there is a subwoofer.
If you select “No,” you cannot adjust the subwoofer level/
subwoofer phase in sound setup.
23-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 24 Thursday, October 4, 2012 5:03 PM
Settings When Switching Users
The functions/settings that are affected when switching users are as
shown below.
Item
My Favorites
Ref. page
User Registration
20
Setting My Favorites*1
21
Displaying the Camera Image*2
23
HD Radio/RBDS Displaying Radio Text
29
General Setup
Setting Top banner and Bottom banner
Display
40
Switching the Display Color
41
Sound Setup
Turning Subwoofer ON/OFF
44
Adjusting the Subwoofer Level
45
Source setup
Source Layout Setting
50
Hands-Free
Phone Control
Assigning as a Short Cut Dialing
Number
64
Redial Function
63
Phone Book Function
63
Switching the Image Pattern for the
Rear Camera*2
70
Switching the Image Pattern for the
Front Camera*2
72
Camera
Operation
Guide Display ON/OFF Setting
70, 73
Adjusting the Caution Display Location
70, 73
*1 Except i-Personalize Setup
*2 The display pattern can be set when a camera equipped with a switch
function on the Camera screen is connected.
How to Input Characters and Numbers
(Keypad)
Character input is required for user registration, place searches, etc.
The displayed screens and procedures may vary slightly depending on
the function used, but the basic input method is the same.
Input screen area.
(Delete)
Returns to the previous character and erases it.
Touching here for more than 2 seconds will erase all
input characters.
Character keypad
Special character selector switch
Character keypad
Special character keypad
Symbol keypad
Character keypad
(Space)
Input number is confirmed.
Items whose settings are affected when switching
registered users, are indicated by
“
” in this manual.
Example:
24-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 25 Thursday, October 4, 2012 5:03 PM
Top banner and Bottom banner Fade Out
Setting
Switching Sources Using the Top banner
Touch the source button for the Top banner at the top of the Audio/
Visual Playback screen and select the desired source.
Source button
When “Top/Bottom Banner Fade Out” is set to “ON,” the Top banner
and Bottom banner on the Audio/Visual Playback screen fade out after 5
seconds if no operation is performed. To display the keys again, touch
the middle of the screen.
Top banner
EN
Top banner
FR
If the source button is hidden, touch [<<] [>>].
• When “Source Layout Setting” (page 50) is set to “On,” you can
switch sources by tracing the middle of the screen from right to left or
from left to right.
Screen Off Function
Bottom banner
This mode is useful if you feel the unit’s display is too bright at night.
To cancel Screen OFF mode, touch the screen or press any button.
• Screen OFF mode is not canceled by Volume UP/DOWN, Mute ON/
OFF.
• Screen OFF mode is canceled when the power or ACC is turned off.
• When the gear lever is shifted to the reverse (R) position while the
rear camera is connected, the rear camera image is displayed.
• When a call is received while a BLUETOOTH device is connected,
the incoming call screen is displayed.
• For details of how to set Top/Bottom Banner Fade Out, refer to
“Setting Top banner and Bottom banner Display” (page 40).
Switching Sources
When you touch
on the dual screen during video playback, the
screen size selection message is displayed.
During audio/visual playback, press the
(SOURCE) button or touch
a source button in the top banner to switch to the desired source.
Switching Sources Using the
During audio/visual playback, press the
repeatedly to switch to the desired source.
Switching the Dual Screen Display
Dual Wide (Initial setting)
(SOURCE) Button
(SOURCE) button
Radio
Disc*1
USB/iPod*1
PANDORA®*1
PANDORA®(BLUETOOTH)*2
SiriusXM*1
AUX-1*3
3
4
1
AUX-2*
AUX-3*
BLUETOOTH AUDIO*
Radio…
*1 When no disc is inserted or no USB memory/iPod/SiriusXM Tuner/
BLUETOOTH compatible devices is connected, this option is not
available.
*2 When BLUETOOTH Pandora is set to “Off,” this option is not
available.
*3 When AUX In is set to “Off,” this option is not available.
4 When AUX3 In Sel. is set to “iPod Video,” this option is not
*
available.
Dual Full
25-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 26 Thursday, October 4, 2012 5:03 PM
Full Screen
About the Indicator Display
The Indicator Bar at the bottom of the screen displays various types of
information, like the current time.
Touch Operation
You can operate the system by using the touch panel on the screen.
• Be sure to touch the onscreen button lightly with the pad of your
finger to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• Onscreen buttons that cannot be operated appear dull in color.
Common onscreen buttons
[
[
]:Returns to the previous screen. Depending on the
function, this button may cancel the operations
performed on the screen.
]: Closes the window.
The display will differ depending on the source. For
details, refer to the display example of each source.
Lights up when connected to a BLUETOOTH
compatible device.
: BLUETOOTH connection to audio device
: BLUETOOTH connection to Hands Free Phone
Blinks while reconnecting. Does not display when
connection is set to OFF.
Indicates the battery level of the connected
BLUETOOTH device.
Battery
Level
No Battery
Level 1
Level 2
Level 3
Icon
This may not be displayed depending on the connected
BLUETOOTH device.
Indicates the signal strength level of the connected
BLUETOOTH compatible device.
Displayed when BLUETOOTH setting is ON.
0
Selecting an Item in a List
To scroll through a list, perform the following operations.
Touch the screen and slide your finger up and down.
1
2
3
No Service
The clock display
You can switch between the 12 hour display and 24 hour
display options.
For details of the clock display settings, refer to “Navigation
System OM” in the CD-ROM.
The screen will scroll along with your finger movement.
Also, you can touch [ ] and [ ].
• After touching the screen, move your finger away from the screen
before dragging and that item will be selected.
26-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 27 Thursday, October 4, 2012 5:03 PM
Radio/HD Radio™/RBDS
INE-W927HD can receive HD Radio signals based on digital radio
broadcast standards in addition to analog radio broadcasts using RBDS.
HD Radio signals are broadcast in the service areas of the current AM/
FM broadcasters where they provide digital audio distribution and data
services. This unit receives the above digital broadcasts for your highquality sound enjoyment.
Depending on the signal strength in TUNER mode, INE-W927HD will
automatically switch between HD Radio if digital signals can be
received, and analog radio using RBDS if digital signals cannot be
received. For details, please refer to “Switching between Digital and
Analog,” “Forced Analog Mode.”
• RBDS mode is only available during FM broadcast reception.
This unit is able to receive signals based on the terrestrial digital radio
broadcasting standard.
When current AM/FM broadcasters are transmitting digital audio and
data services, HD Radio signals are on-the-air in their service area. You
can receive their digital broadcast and enjoy high quality sound.
If there is no HD Radio signal in the current area, after 10 seconds, this
unit will switch to receive the RBDS Radio signal automatically.
However, the display is still HD Radio mode screen.
Listening to the Radio
1
2
(SOURCE) button.
Press the
Touch [Radio] of Top banner.
The radio mode is activated and the display changes to the
Radio mode screen.
• The display content varies depending on the last band selected.
([RadioFM1], etc.)
3
Touch [Band] of Bottom banner to select the
desired radio band.
FR
Each touch changes the bands as follows:
FM1
4
FM2
AM
FM1
Touch [TUNE] to select the tuning mode.
DX SEEK
Local SEEK
D.Local SEEK
MANUAL
ES
D.DX SEEK
PTY*1
*1 Displays only when the PTY tuning mode is selected. For
details, refer “PTY (Program Type) Tuning (Analog Broadcasts
only)” (page 28)
Display example for Radio main screen
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode*2;
Both strong and weak stations will be tuned in.
- Local mode*2;
Only strong stations will be tuned in.
The initial setting is DX.
- D(Digital).DX SEEK mode;
Automatically receives a receivable digital broadcast.
- D(Digital).Local SEEK mode;
Automatically receives a strong digital broadcast only.
*2 Depending on the signal status, a digital or analog broadcast is
received.
Touch [<<], [>>]
• During Forced Analog mode, digital broadcasts cannot be
received.
Band display
Displays the band of the signal currently being
received.
Frequency display
Displays the frequency, song name and artist name of
the signal currently being received.
Preset button
Registers and recalls preset frequencies.
SEEK mode
Displays the current SEEK mode.
TAG Indicator
Blinks during tagging.
Multicast Indicator
Lights during multicast reception.
HD Radio Indicator
Displays during HD Radio reception.
EN
5
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
27-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 28 Thursday, October 4, 2012 5:03 PM
Presetting Stations Manually
Forced Analog Mode
1
Press the Digital/Analog button to receive analog broadcasts only.
2
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
Touch and hold any one of the preset buttons for at
least 2 seconds.
Touch [Digital/Analog].
• If digital broadcast is received, this operation switches reception to
analog mode.
• During Forced Analog mode, only analog broadcasts will be received
even when digital broadcasts become available.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.Memo] of
Bottom banner.
The tuner automatically seeks and stores 6 strong stations into
the preset buttons in order of signal strength.
When automatic storing has completed, the station stored in the
preset 1 is selected.
If [A.Memo] is not displayed, touch [<<] or [>>] in the bottom
banner to display [A.Memo].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
• You can cancel this process by touching [A.Memo] while the tuner is
automatically seeking stations. Canceling will return the tuner preset
to the previous setting.
Receiving a Multicast (HD Radio mode
only)
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of 8 multicast station channels can be selected on
this unit.
• Indicator appears when signal reception is possible.
• The station number of the current broadcast station appears on the
screen.
Selecting from the program list
1
Touch [Multicast List].
A list of the types of programs currently being broadcast are
displayed.
2
Select and touch the desired SPS broadcast track.
Reception of signals from the selected SPS broadcast
station starts, and is indicated on the screen.
Changing the Multicast channels directly
Touch [
Multicast] or [Multicast
]
The Multicast channel of the received radio station is changed.
• If reception is lost during SPS broadcasting due to weak or no signal,
the screen will display “HDx Signal loss.”
If SPS broadcast reception is lost for over 100 seconds, reception will
switch over to MPS broadcast (the reception mode will automatically
return to SPS when SPS broadcasts become available again).
Tuning to Preset Stations
You can tune in the preset stations in memory on either band using its
preset number.
1
2
Touch [Band] of Bottom banner repeatedly until the
desired band is displayed.
Touch any one of the preset buttons that has a
station stored to it.
PTY (Program Type) Tuning (Analog
Broadcasts only)
FM Radio mode
1
Touch [PTY Search] of Bottom banner.
The Select PTY list screen is displayed.
If [PTY Search] is not displayed, touch [<<] in the bottom
banner to display [PTY Search].
The preset station is received.
2
Touch the selected program type to start searching
for a station in the type.
If no PTY station is found, “NO PTY.” will be displayed.
3
Touch [TUNE] to choose the PTY tuning mode.
The PTY mode is activated.
4
To select the station in the PTY, touch [
] or [
].
28-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 29 Thursday, October 4, 2012 5:03 PM
Displaying Radio Text
Text messages from a radio station can be displayed.
1
2
Tune in a radio station that transmits text messages.
Touch [Info] in the bottom banner in FM radio mode
repeatedly to switch to the desired display.
HD Radio
Station Info Mode (Station Name/Frequency/Song Name)
Song Info Mode (Station Name/Song Name/Artist Name/
Album Name)
RBDS
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
• When the memory of iPod/iPhone is full, “iPod Memory Full, Tag
Count X” is displayed. The tag information will be stored to the unit.
• If the tagging operation is interrupted by a hands-free phone call, the
tagging operation will be canceled and the unit will display “Cannot
Tag”.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “Tuner Memory Full. Connect iPod” may
be displayed.
• When the iPod/iPhone is disconnected from the unit during tagging,
its tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information
will be transferred to the iPod/iPhone automatically. When the iPod/
iPhone memory becomes full, “iPod Memory Full” will be displayed,
and any remaining tag information on the unit will not be transferred
to the iPod/iPhone.
• If tag information already exists, “Already Tagged” will be displayed
when you try to tag information again.
About the Feature Logos
Station Info Mode (PS/PTY/ Frequency/Song Name)
Song Info Mode (PS/Song Name/Artist Name/Album Name)
Radio Text Mode (Radio Text)
Storing the Tag Information (HD Radio
mode only)
iTunes Tagging lets you tag songs heard on HD Radio stations. You can
preview, buy and download later, songs from your iTunes tagged
playlist the next time you sync your iPod/iPhone. If the unit is
connected to a Tagging compatible iPod/iPhone, you can use the iTunes
Tagging function. For details, refer to the Owner’s Manual of the
Tagging compatible iPod/iPhone.
When a desired song is heard on an HD Radio station, touch the [TAG]
icon to save its tag information.
• Digital, CD-quality sound. HD Radio Technology enables local
radio stations to broadcast a clean digital signal. AM sounds like
today’s FM and FM sounds like a CD.
• Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name, artist,
station IDs, HD2/HD3 Channel Guide, and other relevant data
streams.
• Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original
music as well as deep cuts into traditional genre.
• iTunes® Tagging provides you the opportunity to discover a
wide range of content and the means to “tag” that content for
later review and purchase from the iTunes® Store.
• Visual information related to content being played on your HD
Radio receiver, such as Album Art, historical photographs, still
art from live broadcasts, among other related content.
When tagging is allowed,
the TAG icon is displayed.
If no iPod/iPhone is connected, “Tag Count X” is displayed (X is
the total amount of the tag information stored in this unit).
29-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 30 Thursday, October 4, 2012 5:03 PM
CD/MP3/WMA/AAC
Repeat Play
Touch [
Display example for MP3/WMA/AAC main screen
] to repeatedly play back.
The tracks (files) will be played repeatedly.
The repeat mode switches every time the button is touched.
CD:
Repeat
(OFF)
Repeat
MP3/WMA/AAC:
Repeat
Repeat Folder*
(OFF)
* Only files in a folder are repeatedly played back.
• If the Repeat Play mode is activated during M.I.X. playback, the
M.I.X. mode will be canceled.
Song title
Artist title
Album title
Current song no./Total song no.
Elapsed time
M.I.X. (Random Play)
• If there is no CD text, the message “NO TEXT” appears.
Touch [
] of Bottom banner during playback.
The tracks (files) on the disc will be played back in a random
sequence.
Playback
The M.I.X. mode switches every time [
1
2
Press the
Repeat
(SOURCE) button.
CD:
M.I.X.
Touch [Disc] of Top banner.
] is touched.
(OFF)
M.I.X.
The display shows the Disc mode screen.
When a disc is inserted into the disc slot of this unit, with the
label side facing up, the unit starts playback of the disc.
3
Touch [
(file).
] or [
] to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
Fast reverse :
Touch and hold [
].
MP3/WMA/AAC:
M.I.X. Folder*
(OFF)
M.I.X. Folder*
* Only files in a folder are played back in random sequence.
• If the M.I.X. mode is activated during Repeat playback, the Repeat
Play mode will be canceled.
• If you select a track by using the search mode, the M.I.X. play mode
will be canceled.
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
4
].
To pause playback, touch [
/
].
[ ] is displayed in the middle of the screen.
Touch [ / ] again or touch [ ] in the middle of the screen
to start playback.
• The INE-W927HD can play back MP3/WMA/AAC files saved to CD
or DVD. Use a format compliant with this unit.
For further information about playing or storing MP3/WMA/AAC
files, refer to pages 31 and 32 before using the unit.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• If a disc contains both audio data and MP3/WMA/AAC data, this unit
plays back only the audio data.
• The track display for CD audio data playback shows the track
numbers recorded on the disc.
• If an MP3/WMA/AAC disc with many files and folders is played, it
may take longer than normal to start playback.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
30-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 31 Thursday, October 4, 2012 5:03 PM
Selecting Folders (Concerning MP3/
WMA/AAC)
Touch [
folder.
] or [
] of Bottom banner to select the
Searching from CD Text
1
Touch [
(Search)] of Bottom banner during
playback.
The CD text search screen is displayed.
2
Touch the selected track name.
The selected track will be played back.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
File/Folder Name Search (Concerning
MP3/WMA/AAC)
1
Touch [
(Search)] of Bottom banner during
playback.
Touch [MUSIC].
The folder name list screen is displayed.
Folder Name Search mode
3
Touch [
] in the desired folder.
The first file in the selected folder is played back.
File Name Search mode
3
Touch the desired folder name.
The File name of the selected folder is displayed.
4
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
What is MP3?
MP3, whose official name is “MPEG Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
The search mode is activated.
2
About MP3/WMA/AAC
Touch the desired file name.
The selected file is played back.
• To return to the previous hierarchy, touch [
].
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
• After selecting a folder via a Folder name search, touch [
] on the
main screen to display the folder search screen.
• After selecting a file via a File name search, touch [
] on the
main screen to display the file search screen.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
MP3/WMA/AAC files that are playable on this device have the
file extensions.
MP3: “mp3”
WMA: “wma” (ver. 7.x, 8.x, 9.x are supported)
AAC: “m4a”
WMA is not supported for the following files, Windows Media
Audio Professional, Windows Media Audio 9 Voice or Windows
Media Audio 9 Pro Lossless.
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
Playback of AAC files encoded by iTunes is supported.
31-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 32 Thursday, October 4, 2012 5:03 PM
Supported playback sampling rates and bit rates
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be
what’s expected. Verity the writing order in the software’s
documentation. The playback order of the folders and files is as
follows. (The following numbers may differ from actually
displayed numbers.)
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz, 16 kHz,
11.025 kHz, 8 kHz
Bit rates:
48 - 320 kbps
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
Root
Folder
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1.0, v1.1, v2.2, v2.3, v2.4, and
WMA tag Ver.1.x. If tag data is in an MP3/WMA/AAC file, this
device can display the title (track title), artist name, and album
name ID3 tag/WMA tag data (maximum 64 characters).
For non-supported characters, blank character, “No Title” is
displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then written to a CD-R, CDRW (DVD-R/DVD-RW/DVD+R/DVD+RW) using CD-R writing
software and USB memory.
• Maximum numbers of playable files / folders
Disc: 1,000 files/folders (including Root Folder/DivX® file)
USB memory: 10,000 files/folders (including Root Folder/
DivX® file)
• Largest playable file size: 512 MB
Playback may not be performed if a disc exceeds the limitations
described above.
If a file/folder name is long, the maximum possible number of
files may decrease.
• Both Audio and Video files are counted if their formats are
playable on this unit.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
CD-RWs, DVD-Rs, DVD-RWs, DVD+Rs, DVD+RWs and USB
memory.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2, UDF1.02 and UDF1.02(ISO Bridge).
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). File names are limited to 256 characters (including
the extension).
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device can play back discs in Joliet, Romeo, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Folder
MP3/WMA/AAC File
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Formats supported
This device supports CD-ROM Mode1, CD-ROM XA
Mode2(Form1&2), Mixed Mode CD and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
32-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 33 Thursday, October 4, 2012 5:03 PM
The DVD operation screen display
DVD
Touch the screen while the DVD playback screen is
displayed.
The DVD operation screen is displayed.
Display example for DVD Video main screen
EN
FR
Touch [<<], [>>]
• The operation screen changes to the visual screen in the DVD mode
for 5 seconds after an operation has been performed.
• If you try to activate the DVD while driving, the display will show the
warning-Picture off for your safety.
• Some operations cannot be carried out depending on the disc or
playback screen.
Display example for DivX® main screen
Touch [<<], [>>]
Information display-1
DVD-Video:
Title name/Chapter No.
DivX®:
Title name/File No./Current File No./Total File No. in Current
Folder
Information display-2
DVD-Video:
Audio signal output/Subtitle/Angle
DivX®:
Audio signal output/Subtitle
Remaining time for playing
Elapsed time
Disc types that can be used for each heading are
represented by the following marks.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video
mode can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the
DivX® mode can be used.
33-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 34 Thursday, October 4, 2012 5:03 PM
Playing a Disc
If a Menu Screen Appears
On DVD mode, menu screens may appear automatically. If this
happens, perform the operation described below to start playback.
WARNING
It is dangerous for the driver to watch the DVD/TV/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
Direct Menu Operations
Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
Install the INE-W927HD correctly so that the driver
cannot watch DVD/TV/Video unless the vehicle is
stopped and the emergency brake is applied.
1
Touch [Key].
The menu operation mode will be displayed.
If the INE-W927HD is not installed correctly, the driver
will be able to watch the DVD/TV/Video while driving
the vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
Caution
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
• If you switch the power or Ignition key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
Touch [
][
] to change the Key panel location
from right to left or vice-versa.
Touch [Return] to return to the previous display.
2
• Play Position Memory Function
Even if you turn power off or switch the Ignition key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
2
Press the
(SOURCE) button.
Select a desired menu item by touching [
[ ] or [ ].
], [
],
• Touching [ ] in the operation panel returns to the screen in
step 1.
• Touching [Key] displays the Numeric Keypad Input Mode
screen.
For details of the Numeric Keypad Input Mode screen, refer to
“Numeric Keypad Input Operations” (page 35).
3
Touch [Enter] to confirm the selected item.
Touch [Disc] of Top banner.
The display shows the Disc mode screen.
Or insert a disc with the label side facing up. The unit starts
to play the disc.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
• Refer also to “Disc Setting” (page 50).
• While reading a DivX® file, the fast-forwarding/fast-reversing and
repeat functions, etc. cannot be used.
• A DivX® file that exceeds 4GB cannot be played back.
34-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 35 Thursday, October 4, 2012 5:03 PM
Numeric Keypad Input Operations
1
Stopping Playback
Touch [10KEY] of Bottom banner.
The numeric keypad input mode screen appears
If [10KEY] is not displayed, touch [<<] in the bottom banner
to display [10KEY].
2
Touch and hold [ ] for at least 2 seconds during
playback.
“
” indicator and [
] in the middle of the screen are displayed.
• Playback starts from the beginning when [ /ll] or [ ] in the
middle of the screen is touched while playback is stopped.
Touch a desired number.
Fast-forwarding/Fast-reversing
1
3
Touch [Enter] on the numeric keypad mode screen
to confirm your selection.
Touch [
] to hide the keypad display.
Displaying the Top Menu Screen
When a DVD contains two or more titles, the top menu screen appears.
The top menu screen appears.
2
• To perform necessary operations, refer to “If a Menu Screen
Appears” (page 34).
Displaying the Menu Screen
With a DVD having two or more menus, a menu screen will appear for
the programs available, in addition to the main programs.
The Root menu screen appears.
• To perform necessary operations, refer to “If a Menu Screen
Appears” (page 34).
] to return to normal playback.
• No sound is played back during fast-forwarding/fast-reversing.
• On DVD mode, the menu screen may reappear during fastforwarding/fast-reversing.
• This operation may not be possible on certain discs.
] or [
].
The chapter/track/file switches each time the button is touched,
and playback of the selected chapter/track/file starts.
Touch the stop button during playback to stop playback. That position is
stored in the memory.
Touch [ ] during playback.
] in the middle of the screen are
Touch [ /ll] in the PRE STOP mode or touch [
the middle of the screen.
/
During playback, touch [
Stopping Playback (PRE STOP)
2
Touch [
Finding the Beginnings of Chapters/
Tracks/Files
Touch [MENU] of Bottom banner.
“Pre ” indicator and [
displayed.
During playback, touch and hold [
] (Fastreverse) or touch and hold [
] (Fast-forward).
• For a DivX® file that does not contain index information, the
fast forward and the reverse option is not available.
Touch [TOP MENU] of Bottom banner.
1
FR
DVD-Video:
Touch and hold for more than 1 second to forward/reverse
at double speed.
Every time you touch [
]/[
] during fast- reverse/
fast- forward, the speed changes as follows: 2x
8x
32x
2x.
DivX®:
Touch and hold for more than 1 second to forward/reverse
at 8x speed.
Every time you touch [
]/[
] during fast- reverse/
fast- forward, the speed changes as follows: 8x
16x
32x
8x.
Touch [
] to delete an entered number.
Touch [Delete All] to delete all entered number.
EN
: Touch this to start playback from the beginning of the
following chapter, track or file.
: Touch this to start playback from the beginning of the
current chapter, track or file.
• Some DVDs do not have chapters.
Supplementary explanations
“Chapters” are divisions of movies or musical selections on
DVDs.
] in
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
35-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 36 Thursday, October 4, 2012 5:03 PM
Playing Still Frames (Pausing)
1
2
Repeat Playback
Use this function to play the disc’s titles, chapters or tracks, etc.,
repeatedly.
During playback, Touch [
Touch [ / ] or [
resume playback.
/
] of Bottom banner.
] in the middle of the screen to
Touch [
DVD Video
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
Forward frame-by-frame Playback
1
In the pause mode, touch [
].
The picture advances by one frame each time the button is
touched.
2
] of Bottom banner.
The repeat mode switches every time the button is touched.
(Chapter)
The chapter is played repeatedly.
(Title)
The title is played repeatedly.
(OFF)
Playback returns to normal mode.
• The REPEAT mode is always turned off when [
held for at least 2 seconds.
] is touched and
DivX ®
Touch [ / ] or [ ] in the middle of the screen to
return to normal mode.
• No sound is output during forward frame-by-frame playback.
• You cannot execute reverse frame-by-frame playback.
(File)
The file is played repeatedly.
(Folder)
The folder is played repeatedly.
(Repeat All)
The disc is played repeatedly.
Slow Motion Playback
1
2
When [
] is touched and held while in the pause
mode, the 1/8th speed slow motion playback mode is
set.
Furthermore, when touched and held [
] again,
the slow motion speed switches to 1/2 the normal
speed.
Touch [
/
Searching by Title Number
Use this function to easily find positions on the DVD using the DVD’s
titles. Perform operations while playback is stopped.
1
The numeric keypad input mode screen appears.
If [10Key] is not displayed, touch [<<] in the bottom banner
to display [10Key].
• For DVD Video, the numeric keypad can also be displayed by
touching the Menu screen and then touching [Key] twice.
] of Bottom banner to play back.
• No sound is played during slow motion playback.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
• You cannot execute reverse slow motion playback.
Touch [10Key] of Bottom banner.
2
Enter a desired title by touching its number.
See page 35 for operation of the numeric keypad.
Selecting Folders
Touch [
folder.
] or [
] of Bottom banner to select the
• Touch [
Touch [
] to play from the first file of the previous folder.
] to play from the first file of the next folder.
3
Touch [Enter].
Playback will start from the number selected.
4
Touch [
].
• This function cannot be used on discs on which no title numbers are
recorded.
• Some disc may not accept any operation.
36-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 37 Thursday, October 4, 2012 5:03 PM
Searching Directly by Chapter Number
Use this function to easily move to the beginnings of the chapters on the
disc. Perform operations during playback, during PRE-STOP or while
playback is paused.
1
Touch [10Key] of Bottom banner.
The numeric keypad input mode screen will appear.
If [10Key] is not displayed, touch [<<] in the bottom banner
to display [10Key].
2
Touch and enter the chapter number you want to
play.
Switching the Angle
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
Touch [ANGLE] of Bottom banner.
The angle switches between the angles recorded on the disc
every time the button is touched.
If [ANGLE] is not displayed, touch [<<] or [>>] in the bottom
banner to display [ANGLE].
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
EN
FR
See page 35 for operation of the numeric keypad.
3
Touch [Enter] to confirm your selection.
Playback will start from the selected chapter.
4
Touch [
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
].
• This function is not available for a disc on which chapters are not
stored.
Searching for a Desired Video File
You can select a video file from the list screen.
1
Touch [
(Search)] of Bottom banner.
The search mode is activated.
2
Folder Name Search mode
Touch [
File Name Search mode
Touch the desired folder name.
The File name of the selected folder is displayed.
4
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
If [AUDIO] is not displayed, touch [<<] or [>>] in the bottom
banner to display [AUDIO].
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Switching the Subtitles (Subtitle
Language)
] in the desired folder.
The first file in the selected folder is played back.
3
Touch [AUDIO] of Bottom banner.
Touch [Video].
The folder list screen appears.
3
ES
Switching the Audio Tracks
Touch the desired file name.
The selected file is played back.
• To return to the previous hierarchy, touch [
].
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
• After selecting a folder via a Folder name search, touch [
] on the
main screen to display the folder search screen.
• After selecting a file via a File name search, touch [
] on the
main screen to display the file search screen.
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
Touch [Sub Title] of Bottom banner.
Touching this button repeatedly selects sequentially the subtitle
languages recorded on the disc, and then turns the subtitles
OFF.
If [Sub Title] is not displayed, touch [<<] or [>>] in the bottom
banner to display [Sub Title].
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
37-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 38 Thursday, October 4, 2012 5:03 PM
About DivX®
DivX® is a codec (software) to compress moving images while
maintaining image quality using a highly advanced compression ratio
and operating speed.
• Official DivX® Certified product
ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation. This is an official
DivX Certified® device that plays DivX video. Visit divx.com for
more information and software tools to convert your files into
DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your
registration.
Media supported
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs and USB memory device that are recorded in
the DivX® mode.
Corresponding extension
“avi,” “divx”
Video Codec
DivX® versions 3, 4, 5, and 6 (versions 5 handle both interlaced
and progressive)
Audio Codec
MPEG1 Layer2 (MP2)
MPEG1 Layer3 (MP3)
MPEG2 Layer2 (MP2)
MPEG2 Layer3 (MP3)
Dolby Digital
32 to 384 kbps
32 to 320 kbps
8 to 160 kbps
8 to 160 kbps
32 to 448 kbps
The optimum size for DivX® playback is as follows:
Screen Size:
96 to 720 pixel (horizontal) × 96 to 576 pixel
(vertical)
With an aspect ratio other than 16:9, black bars may be
displayed on the left and right sides, or at the top and bottom of
the screen.
Image bit rate:
“average 4 Mbps, Peak 8 Mbps”
Home Theater Profile supported
38-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 39 Thursday, October 4, 2012 5:03 PM
2
Setup
Touch [General].
Setup Operation
EN
Touch the [SETUP] icon on the Audio/Visual Playback screen to
display the Setup main screen.
[SETUP] icon
The General Setup screen appears.
3
FR
Select the desired item.
ES
General Setup
General Setup Operation
Setting items: Language / Remote Sensor / Top/Bottom Banner
Fade Out / Screen/LED Customize / Visual / About /
Installation
• Depending on the item, repeat step 3.
To display the General Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General Setup Menu, as long as the car’s ignition has not been
turned off. It is not necessary to repeat the above procedure
(1 through 3) of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to
] to return to the previous screen.
• Immediately after changing the settings of General Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
Language Setting
[Language] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 39).
Setting the Scroll
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: Off (Initial setting) / On
Off:
On:
Turns off the scroll mode.
Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
The Setup main screen is displayed.
39-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 40 Thursday, October 4, 2012 5:03 PM
Format Settings
The character code to be used for tag text information displayed on the
screen can be selected from 7 character codes.
Setting item: Format Sel.
Setting contents: EU1 / EU2 (Initial setting) / RUS / CHI / THA /
ARA
EU1:
EU2:
RUS:
CHI:
THA:
ARA:
ISO 8859-1
ISO 8859-15
ISO 8859-5
GB18030
CP874
CP1256
Setting Top banner and Bottom banner
Display
[Top/Bottom Banner Fade Out] is selected on the General setup menu
in step 3. Refer to “General Setup Operation” (page 39).
You can configure the display setting for the Top banner and Bottom
banner for the audio/visual source.
Setting item: Top/Bottom Banner Fade Out
Setting contents: Off (Initial setting) / On
Off:
On:
Always displayed
Fade out after 5 seconds if no operations performed
Setting the Menu Language
The Setup menu, feedback information, etc. for this unit can be changed
to appear in the selected language.
Screen/LED Customize
Setting item: Language Sel.
Setting contents: English / German / French / Spanish /
Portuguese / Italian / Dutch / Finnish /
Norwegian / Swedish / Russian / Thai / Arabic /
Chinese / Other languages (Czech / Danish /
Greek / Hungarian / Polish / Slovak / Turkish)
Touch [Screen/LED Customize] on the General setup menu in step 3.
Refer to “General Setup Operation” (page 39).
• Touch [OK] to confirm the language and display the screen in the
specified language.
Remote Sensor Setting
[Remote Sensor] is selected on the General setup menu in step 3. Refer
to “General Setup Operation” (page 39).
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front (Initial setting) / Rear
Front:
Rear:
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUTPUT of this unit
becomes effective. The remote control
operates the source connected to the AUX
OUTPUT terminals.
• If the RSE (page 54) is “Off,” the setting is not displayed.
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto (Initial setting) / On / Off
Auto:
On:
Off:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Keep the background illumination of the monitor dark.
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
• When “Auto” or “On” is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 41), and “Adjusting the Minimum Level of Backlight”
(page 40).
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while traveling at
night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
40-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 41 Thursday, October 4, 2012 5:03 PM
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Illumination Level
Setting level: -2 to +2 (Initial setting: 0)
Visual Setting
[Visual] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 39).
1
EN
Touch the desired item.
Switching the Display Color
FR
You can choose from 5 different display colors.
Setting item: Screen Colour
Setting contents: Blue (Initial setting) / Red / Green / Amber /
Black
• “Video” can be selected while a video is playing.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
2
Settable items differ depending on the application.
[Video] (Video media):
Display Mode*1 / Live Contrast / Visual EQ / Bright / Colour / Tint
/ Contrast / Sharp
Setting item: Screen Alignment
1
[Direct Camera]*2:
Touch [Screen Alignment] in the Screen/LED
Customize screen.
Live Contrast / Bright / Colour / Contrast
[AUX Camera]*2:
The adjustment screen appears.
2
3
This completes adjustment, and returns to the previous
screen.
• If you touch [Cancel] on the adjustment screen, no adjustment is
done and returns to the previous screen.
Initializing the Touch Panel Corrected
Values
Initialize the corrected values adjusted by Adjusting the Touch Panel.
1
2
Live Contrast / Bright / Colour / Contrast
[Navigation]:
Accurately touch the
mark provided in the
upper left corner of the screen.
Accurately touch the
mark provided in the lower
right corner of the screen.
ES
Touch the desired item.
Bright / Contrast
*1 When media is set to AUX, the settings cannot be changed in the
situations below.
• When “AUX In” is set to “DVB-T” is “On.”
*2 The camera names set under the “Direct Camera/AUX Camera”
settings are displayed. The camera names are not displayed when
“Off” is set (pages 58, 59).
3
4
Touch [
Touch [
] or [
] to change its setting.
] to return to the previous screen.
• Immediately after changing the settings of Display Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
Touch [Screen Alignment Reset] in the Screen/
LED Customize screen.
After the confirmation message appears, touch
[OK].
The corrected values are initialized.
41-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 42 Thursday, October 4, 2012 5:03 PM
Switching Display Modes
Setting item: Display Mode
Setting contents: WIDE (Initial setting) / CINEMA / NORMAL
Adjusting the Live Contrast
This function automatically adjusts the areas on the screen that are too
bright or too dark and corrects them to natural brightness.
Setting item: Live Contrast
Setting contents: OFF (Initial setting) / LOW / HIGH
Selecting the Visual EQ Mode (Factory’s
Setting)
In WIDE mode, the monitor displays a normal picture wider to fit
in a wide-screen monitor by evenly stretching out the picture
horizontally.
You can select a mode suitable for the subject image.
Setting item: Visual EQ
Setting contents: OFF (Initial setting) / NIGHT M. / SOFT /
SHARP / CONTRAST
Initial Setting
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
OFF:
NIGHT M.:
In CINEMA mode, the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
• To return to the default video settings, set this function to OFF. Any
Visual EQ selection or changes made are reset their initial settings.
Adjusting Brightness
Setting item: Bright
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
In NORMAL mode, the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
Adjusting Color of Picture
Setting item: Colour
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the color between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Adjusting Tint of Picture
Setting item: Tint
Setting content: R15 to G15 (Initial setting: 0)
Adjust the color from R15 to G15.
• When setting PAL, you can not adjust the TINT.
42-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 43 Thursday, October 4, 2012 5:03 PM
Adjusting Image Contrast
Setting item: Contrast
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the contrast between LOW (-15) and HIGH (+15).
When it reaches the minimum or maximum point, the display
shows “LOW” or “HIGH” respectively.
Adjusting Picture Quality
Setting item: Sharp
Setting content: -5 to +5 (Initial setting: 0)
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
Displaying the Deregistration Code
1
2
3
Touch [Warranty/Copyright Info.].
Touch [DivX(R) VOD].
EN
Touch [Deregistration].
The confirmation dialog screen appears.
4
Touch [OK].
The deregistration code is displayed on the screen.
• When you have finished, touch [Cancel]. If you want to continue and
display a new registration code, touch [OK], check the registration
code, and then touch [OK] again.
FR
Initializing the System
Saving and Calling the Adjusted Picture
Quality
When adjusting audio (video media), you can store the settings made
for “Adjusting Live Contrast, Brightness, Color, Tint, Contrast and
Sharp.”
Setting item: Preset1 / Preset2
1 After completing “Adjusting Live Contrast, Brightness,
Color, Tint, Contrast and Sharp” (pages 42, 43), touch
and hold [Preset1] or [Preset2] to save the settings.
2 Touch [Preset1] or [Preset2] to call the saved settings.
• Display Mode cannot be registered.
You can initialize all data, to restore the factory settings. Remove the
CD/DVD disc, etc. from the system before operation
Setting item: Restore Factory Setting
1
2
Touch [Restore Factory Setting].
After the confirmation message appears, touch
[OK].
The confirmation screen appears again.
3
Touch [OK].
The system starts initialization.
• Do not turn on/off the power or change the ignition key position until
system restart is completed.
About INE-W927HD
[About] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 39).
Displaying the Product Information
You can view the version information of this product. Make note of this
information and refer to it whenever you contact Alpine Tech Support or
an Alpine-authorized dealer.
Installation Setup
[Installation] is selected on the General setup menu in step 3. See
“General Setup Operation” (page 39).
Setting item: Installation
The Installation check screen is displayed.
Setting item: Version Info
Contents: Serial No. / Firmware Version
Checking the DivX® Registration
This unit will display the registration code required to play a DivX®
VOD (Video On Demand), or you can also display the deregistration
code.
Setting item: Warranty/Copyright Info.
Displaying the Registration Code
1
2
3
Touch [Warranty/Copyright Info.].
Touch [DivX(R) VOD].
Touch [Registration].
The registration code is displayed on the screen.
4
Touch [OK].
43-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 44 Thursday, October 4, 2012 5:03 PM
Sound Setup
Sound Setup Operation
To display the Sound Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to
] to return to the previous screen.
• Immediately after changing the Sound Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
Setting the Balance/Fader/Subwoofer
[Balance/Fader/Subwoofer] is selected on the Sound setup menu in
step 3. Refer to “Sound Setup Operation” (page 44).
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Sound mode operation has been
released. Engaging the parking brake can reactivate the Sound
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of “To display the Sound mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Sound mode screen.”
Image area
The following steps 1 to 5 are common operations to each
“Setting item” of Sound Setup. Refer to each section for details.
1
Touch [Setup] icon of Top banner.
Adjusting the Balance/Fader
Touch the desired point within the image area. Or touch
[ ] [ ] [ ] [ ].
The Setup main screen is displayed.
2
Touch [Sound].
Balance: L15 to R15
Fader: F15 to R15
Rear Speaker Setting
You can set the rear speaker output to “Off.”
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
• Note that if you select “Off” when the Rear Speaker Position in Car
Specific Sound Setup is set to “Rear Deck” or “Rear Door/Panel,”
the setting in Car Specific Sound Setup will be canceled.
The Sound Setup screen appears.
3
Select the desired item.
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting: Off)
• Note that if you select “Off” when Subwoofer Installed in Car
Specific Sound Setup is set to “Yes,” the setting in Car Specific Sound
Setup will be canceled.
Setting items: Balance / Fader / Subwoofer / Media Xpander /
Bass Max EQ / Parametric EQ / Time Correction /
X-OVER / Defeat / Volume / Source Volume Setup
44-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 45 Thursday, October 4, 2012 5:03 PM
MX DVD
(Movie)
The dialog portion of the video is reproduced more clearly.
Adjusting the Subwoofer Level
You can set the Subwoofer level when a Subwoofer is connected.
Setting item: SubW. LEVEL
Setting contents: 0 to 15 (Initial setting: 0)
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: SubW. Phase
Setting contents: 0° / 180° (Initial setting: 0°)
MX Compress Media
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX Pandora
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
• If the Subwoofer setting is “Off,” the setting cannot be set.
MX AUX/AUX3
Choose the MX mode (Compress Media, Movie, or Music) that
corresponds to the media connected.
Setting the MX (Media Xpander)
[Media Xpander] is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 44). When the currently playing
source is AM radio band, this option is not available.
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The CD, USB memory and iPod/iPhone,
will be able to reproduce the music clearly even in cars with a lot of
road noise.
Setting item: Media Xpander
Touch [ON] of “ALL MX OFF/ON” in the MX setup
screen.
MX HD Radio
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
• To cancel MX mode for all music sources, set MX to “Off” in step 1.
• Each music sources, such as CD and MP3/WMA/AAC can have its
own MX setting.
• Setting to MX sets MX mode of each music sources to “Off.”
• The function is inoperable when Defeat is set to “On.”
Equalizer Presets (Bass Max EQ)
[Bass Max EQ] is selected on the Sound setup menu in step 3. Refer to
“Sound Setup Operation” (page 44).
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item: Bass Max EQ
Setting contents: FLAT (Initial setting) / POPS / ROCK / NEWS /
JAZZ / ELECTRICAL DANCE / HIP HOP / EASY
LISTENING / COUNTRY / CLASSICAL
2
Touch any of [
Media
][
][
][
].
Level
OFF
1
2
EN
MX CD
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
• If the Subwoofer setting is “Off,” the setting cannot be set.
1
(DVD Music)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
3
SiriusXM
• Only one type can be set to ON.
• When Bass Max EQ setting is edited, a Download Sound setting is
disabled.
• When Bass Max EQ is set, the interlinked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in the
Preset in advance.
• The Bass Max EQ setting can be configured when Defeat is “Off.”
DVD
CD
Compress
Media
Pandora
AUX/AUX3
HD Radio
• The MX setting can be performed only when a source is currently
selected.
• MP3/WMA/AAC/iPod/USB Audio/DivX®/BLUETOOTH Pandora/
BLUETOOTH Audio correspond to MX Compress Media.
MX SiriusXM
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
45-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 46 Thursday, October 4, 2012 5:03 PM
Adjusting the Parametric Equalizer
Curve (Parametric EQ)
[Parametric EQ] is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 44).
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Setting the Bandwidth
Touch [
2
3
Setting item: Parametric EQ
1
Adjust the Parametric EQ to your preference.
] or [ ] of “Q Adjust” to select the bandwidth.
Setting contents: 1 (Initial setting) / 2 / 3
To adjust another band, repeat step 1, and adjust all
bands.
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
• Settings exceeding the frequency of adjacent bands are not available.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
• When the parametric EQ is adjusted, the adjustment for Bass Max
EQ becomes ineffective.
• When Bass Max EQ is set, the interlinked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in the
Preset in advance.
• Touch [Flat] to initialize all values.
• The Parametric EQ setting can be configured when Defeat is “Off.”
Calling the Parametric EQ adjusted value
Calling the pre-set Parametric EQ adjusted value.
Adjusting the Band
Touch [Band] to select the band to be adjusted.
Band1
Band2
···
Band8
Band9
• You can select a band directly by touching the screen.
Adjusting the Frequency
Touch [ ] or [ ] of “Freq.” to adjust the frequency of the
selected band.
Adjustable frequency Bands: 20 Hz to 20 kHz (in 1/3 octave
steps)
Band1: 20 Hz~100 Hz (63 Hz)
Band2: 63 Hz~315 Hz (125 Hz)
Band3: 125 Hz~500Hz (250 Hz)
Band4: 250 Hz~1 kHz (500Hz)
Band5: 500 Hz~2 kHz (1 kHz)
Band6: 1 kHz~4 kHz (2 kHz)
Band7: 2 kHz~7.2 kHz (4 kHz)
Band8: 5.8 kHz~12 kHz (8 kHz)
Band9: 9 kHz~20 kHz (16 kHz)
Touch [Preset1], [Preset2], or [Preset3] on the
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Adjusting the Time Correction (Time
Correction)
[Time Correction] is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 44).
Before performing the following procedures, refer to “About Time
Correction” (page 48).
Setting item: Time Correction
1
Touch [ms] or [cm] to select mode for making
adjustments.
Each time you touch, the onscreen button and correction
mode changes.
Adjusting the Level
Touch [
band.
] or [
] of “Level” to adjust the level of selected
Setting contents: -7 to +7 (Initial setting: 0)
Correction mode
ms: Adjust time.
cm: Adjust listening position and distance from each speaker.
2
Touch [ ] or [ ] for each speaker to adjust the
time or distance.
0.0msec to 9.9msec (0.1msec/step)
0.0cm to 336.6cm (3.4cm/step)
All speaker setting values are adjustable in the range of 20ms or
680cm.
46-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 47 Thursday, October 4, 2012 5:03 PM
3
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
• Touch [Flat] to set all values to 0.0.
• If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot
be edited (Refer to page 44).
• If the Subwoofer setting is “Off,” the Subwoofer setting cannot be
edited (Refer to page 44).
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset1], [Preset2], or [Preset3] on the time
correction screen.
The setting stored in the Preset will be recalled.
4
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
• Touch [Flat] to initialize all values.
• If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot
be edited (Refer to page 44).
• If the Subwoofer setting is “Off,” the Subwoofer setting cannot be
edited (Refer to page 44).
• While adjusting the X-OVER you should consider the frequency
response of the connected speakers.
Calling the X-OVER adjusted value
EN
FR
Calling the pre-set X-OVER adjusted value.
Touch [Preset1], [Preset2], or [Preset3] on the XOVER screen.
The setting stored in the Preset will be recalled.
Adjusting the Crossover Settings (XOVER)
[X-OVER] is selected on the Sound setup menu in step 3. Refer to
“Sound Setup Operation” (page 44).
Before performing the following procedures, refer to “About the
Crossover” (page 49).
Setting item: X-OVER
1
Touch [Channel] to select the channel.
Each time you touch, the channel switches.
ES
Setting Defeat
[Defeat] is selected on the Sound setup menu in step 3. Refer to “Sound
Setup Operation” (page 44).
If Defeat is “On,” MX, Bass Max EQ, Download Sound Setting and
Parametric EQ functions are turned OFF. This disables any settings
made for these functions.
Setting item: Defeat
Setting content: Off (Initial setting) / On
Volume Setting
[Volume] is selected on the Sound setup menu in step 3. Refer to
“Sound Setup Operation” (page 44).
You can change the volume of the sound heard when a button is
touched.
• The channel being adjusted is displayed in red.
Front HPF
Rear HPF
Setting item: Key Sound Feedback
Setting contents: 0 to 7 (Initial setting: 4)
Subw. LPF
Setting the Volume for Each Source
2
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [ ] or [ ] of “Freq.,” then select the cut-off
frequency.
Setting contents: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) /
100 / 125 / 160 / 200 Hz
[Source Volume Setup] is selected on the Sound setup menu in step 3.
Refer to “Sound Setup Operation” (page 44).
The volume level for each source can be adjusted.
Setting item: Radio / SiriusXM / DVD / CD / Compressed Media /
iPod Music / iPod Video / Pandora / AUX / AUX3 /
BLUETOOTH Audio*
Setting contents: -14 to +14 (Initial setting: 0)
Adjusting the Slope
* BLUETOOTH Pandora correspond to BLUETOOTH Audio.
Touch [ ] or [ ] of “Slope,” then adjust the HPF or LPF
slope.
• Settable source differ depending on the connected device and
settings.
Setting contents: 0 (Initial setting) / 6 / 12 / 18 / 24 dB/oct
Adjusting the Level
Touch [
level.
] or [
] of “Level,” then adjust the HPF or LPF
Setting contents: -12 to 0 dB (Initial setting: 0)
3
Repeat steps 1 to 2 to make adjustment to the other
channels.
47-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 48 Thursday, October 4, 2012 5:03 PM
These values are the time correction values for the different
speakers. Setting these values to make each sound reach the
listening position at the same time as the sound of other speakers.
About Time Correction
The distance between the listener and the speakers in a car vary widely
due to the complex speaker placement. This difference in the distances
from the speakers to the listener creates a shift in the sounds image and
frequency characteristics. This is caused by the time delay between the
sound reaching the listener’s right versus the left ear.
To correct this, this unit is able to delay the audio signal to the speakers
closest to the listener. This effectively creates a perception of increased
distance for those speakers. The listener can be placed at an equal
distance between the left and right speakers for optimum staging.
The adjustment will be made for each speaker in 3.4cm steps.
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker to a high value
and the rear right to zero or a low value.
5.1ms
0.5m
2.25m
The sound is not balanced because the distance between the
listening position and the various speakers is different.
The difference in distance between the front left speaker and the rear
right speaker is 1.75 m (68-7/8").
Here we calculate the time correction value for the front left speaker
in the diagram on the above.
Conditions:
Farthest Speaker – listening position : 2.25 m (88-9/16")
Front left speaker – listening position : 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343*1 × 1000 = 5.1 (ms)
*1 Speed of sound: 343 m/s (765 mph) at 20°C
In other words, giving the front left speaker a time correction value of
5.1 ms makes it seem as if its distance from the listener is the same
as the distance to the farthest speaker.
Time correction eliminates the differences in the time required for the
sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that its
sound reaches the listening position at the same time as the sound of
other speakers.
Example 2. Listening Position: All Seats
Adjust the time correction level of each speaker to almost the same level.
1
2
Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your head
and the various speakers.
Calculate the difference between the distance
correction value to the farthest speaker and the
other speakers.
L = (distance to farthest speaker) – (distance to other
speakers)
Time Correction Value List
Time
Difference
(msec)
Distance
(cm)
Distance
(inch)
Time
Difference
(msec)
Distance
(cm)
Distance
(inch)
0.0
0.0
0.0
5.1
173.4
68.3
0.1
3.4
1.3
5.2
176.8
69.7
0.2
6.8
2.7
5.3
180.2
71.0
0.3
10.2
4.0
5.4
183.6
72.4
0.4
13.6
5.4
5.5
187.0
73.7
0.5
17.0
6.7
5.6
190.4
75.0
0.6
20.4
8.0
5.7
193.8
76.4
0.7
23.8
9.4
5.8
197.2
77.7
0.8
27.2
10.7
5.9
200.6
79.1
0.9
30.6
12.1
6.0
204.0
80.4
1.0
34.0
13.4
6.1
207.4
81.7
1.1
37.4
14.7
6.2
210.8
83.1
1.2
40.8
16.1
6.3
214.2
84.4
1.3
44.2
17.4
6.4
217.6
85.8
1.4
47.6
18.8
6.5
221.0
87.1
1.5
51.0
20.1
6.6
224.4
88.4
1.6
54.4
21.4
6.7
227.8
89.8
1.7
57.8
22.8
6.8
231.2
91.1
1.8
61.2
24.1
6.9
234.6
92.5
1.9
64.6
25.5
7.0
238.0
93.8
2.0
68.0
26.8
7.1
241.4
95.1
2.1
71.4
28.1
7.2
244.8
96.5
2.2
74.8
29.5
7.3
248.2
97.8
2.3
78.2
30.8
7.4
251.6
99.2
2.4
81.6
32.2
7.5
255.0
100.5
2.5
85.0
33.5
7.6
258.4
101.8
2.6
88.4
34.8
7.7
261.8
103.2
2.7
91.8
36.2
7.8
265.2
104.5
2.8
95.2
37.5
7.9
268.6
105.9
2.9
98.6
38.9
8.0
272.0
107.2
3.0
102.0
40.2
8.1
275.4
108.5
3.1
105.4
41.5
8.2
278.8
109.9
3.2
108.8
42.9
8.3
282.2
111.2
3.3
112.2
44.2
8.4
285.6
112.6
3.4
115.6
45.6
8.5
289.0
113.9
3.5
119.0
46.9
8.6
292.4
115.2
3.6
122.4
48.2
8.7
295.8
116.6
3.7
125.8
49.6
8.8
299.2
117.9
3.8
129.2
50.9
8.9
302.6
119.3
3.9
132.6
52.3
9.0
306.0
120.6
4.0
136.0
53.6
9.1
309.4
121.9
4.1
139.4
54.9
9.2
312.8
123.3
4.2
142.8
56.3
9.3
316.2
124.6
4.3
146.2
57.6
9.4
319.6
126.0
4.4
149.6
59.0
9.5
323.0
127.3
4.5
153.0
60.3
9.6
326.4
128.6
4.6
156.4
61.6
9.7
329.8
130.0
4.7
159.8
63.0
9.8
333.2
131.3
4.8
163.2
64.3
9.9
336.6
132.7
4.9
166.6
65.7
5.0
170.0
67.0
48-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 49 Thursday, October 4, 2012 5:03 PM
About the Crossover
Source Setup
Crossover (X-OVER):
This unit is equipped with an active crossover. The crossover limits the
frequencies delivered to the outputs. Each channel is controlled
independently. Thus, each speaker pair can be driven by the frequencies
for which they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF (low pass filter)
of each band, and also the slope (how fast the filter rolls off the highs or
lows).
Adjustments should be made according to the reproduction
characteristics of the speakers. Depending on the speakers, a passive
network may not be necessary. If you are unsure about this point, please
consult your authorized Alpine dealer.
Cut-off frequency
(1/3 octave steps)
HPF
LPF
Low range
speaker
----
20 Hz 200 Hz
Rear high
range
speaker
20 Hz 200 Hz
----
Front high
range
speaker
20 Hz 200 Hz
----
Low range
Slope
HPF
Level
LPF
FLAT, –6,
0 to
–12, –18,
–12 dB
–24 dB/oct.
---FLAT, –6,
–12, –18,
–24 dB/oct.
FLAT, –6,
–12, –18,
–24 dB/oct.
----
0 to
–12 dB
----
0 to
–12 dB
Source Setup Operation
EN
To display the Source Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Source mode operation has been
released. Engaging the parking brake can reactivate the Source
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of “To display the Source mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Source mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.
High range
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [
(Source)].
The Source Setup screen appears.
(Different from actual display)
3
Level adjusting
Output frequency range
(0 to –12 dB)
Select the desired item.
Slope FLAT
Slope adjusting
20 Hz
(Different from actual display)
HPF cut-off LPF cut-off
frequency
frequency
• HPF (high pass filter): Cuts the lower frequencies and allows the
higher frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the
lower frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to FLAT to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as
it may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or
lower than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer
to the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused
by using the crossover outside the recommended value.
Setting items: Source Layout / Disc / SiriusXM / AUX / RSE /
BLUETOOTH Pandora
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to
] to return to the previous screen.
• Immediately after changing the Source Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
49-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 50 Thursday, October 4, 2012 5:03 PM
Setting of the DVD Menu Language
Source Layout Setting
[Source Layout] is selected on the Source setup menu in step 3.
Refer to “Source Setup Operation” (page 49).
You can set whether to switch sources by tracing the middle of the
Audio/Visual Playback screen from right to left or from left to right.
Refer to “Switching Sources” (page 25).
Setting item: Slide Source Change
Setting contents: On (Initial setting) / Off
On:
Off:
Source is changed by tracing
Source is not changed by tracing
Disc Setting
[Disc] is selected on the Source setup menu in step 3. Refer to “Source
Setup Operation” (page 49).
• You can perform DVD setup in DVD video mode.
• Touch [Stop] before performing Disc setup.
Set the language used for the menus (title menu, etc.).
Setting item: DVD Menu Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
SE / RU / CN
• When “Auto” is selected, the primary menu language among the
recorded ones is played.
• As for the language abbreviation, refer to “List of Language Codes”
(page 88).
Setting of the Audio Language
Set the audio language produced from the speakers.
Setting item: Audio Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
SE / RU / CN
• When “Auto” is selected, the primary audio language among the
recorded ones is applied.
• As for the language abbreviation, refer to “List of Language Codes”
(page 88).
Setting of the Subtitle Language
Changing the Language Setting
The audio language, subtitle language and DVD menu language can be
set according to your preferences.
Once set, this becomes the default language. This function is convenient
if you always want to listen in English, for example. (The language
setting is not effective on some discs. In this case, the default language
is set at the factory.)
• When the settings are changed, old settings are overwritten. Make a
note of the current settings before making changes.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 37).
• If the disc does not include the selected language, the disc’s default
language is set.
To play in a language other than those displayed
1 Touch [DVD Menu Language Code], [Audio Language
Code] or [SUBT Language Code].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
To reference language numbers, refer to “List of
Language Codes” (page 88).
3 Touch [OK] to memorize the number.
• The setting content changes to “Other” if the desired language code
is input.
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
SE / RU / CN
• When “Auto” is selected, the primary subtitle language among the
recorded ones is applied.
• As for the language abbreviation, refer to “List of Language Codes”
(page 88).
Changing the Country Code Setting
Set the country code of which you want to set the rating level (Parental
lock).
Setting item: Country Code
Setting contents: Auto / Other
Auto:
Other:
The primary country code among those recorded is
played.
The setting content changes to “Other” if the desired
country code is input.
• If settings are changed, the old settings are overwritten. Make a note
of the current settings before making changes. The settings will be
cleared if the vehicle’s battery is disconnected.
1 Touch [Country Code Input].
2 Touch [
] or [Delete All].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (page 89).
4 Touch [OK] to memorize the code.
50-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 51 Thursday, October 4, 2012 5:03 PM
Setting the Rating Level (Parental Lock)
This function can help limit the viewing of movies to children of
appropriate age levels only.
Setting item: Parental
• If settings are changed, the old settings are overwritten. Make a note
of the current settings before making changes. The memory will be
cleared if the vehicle’s battery is disconnected.
• On unrated discs, playback will not be restricted even if the rating
level is set.
• If you want to play back a disc with parental lock, and its use is
currently restricted, change the rating level and the country number
in order to play back the disc.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels, or to cancel the
parental lock, the setting must be changed.
• Not all discs provide a parental lock. If you are unsure about a disc,
play it first to confirm. Do not leave discs accessible to young
children for whom you deem them inappropriate.
Setting the TV Screen Mode
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
If the rear monitor is not connected, the screen setting is 16:9.
EN
Setting item: TV Screen
Setting contents: 4:3LB / 4:3PS / 16:9 (Initial setting)
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
ES
1 Touch [Parental].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111. Input number are displayed
as “*”.
3 Touch [OK] to memorize the number.
The Parental screen appears.
Set the rating level of PARENTAL
4 Touch [Parental].
5 Touch [ ] on [ ] to turn “On".
Select “Off” to cancel parental lock or if you do not want
to set a rating level.
6 Touch [ ] to return to the previous screen.
7 Touch [Parental Level]
8 Touch [ ] or [ ] to select the rating level (1 to 8).
The smaller the number, the higher the restriction.
9 Touch [ ] to return to the previous screen.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
Changing the password
1 Touch [Password Change].
The numeric keypad screen is displayed.
2 Touch the input screen to enter a new 4-digit password.
• Keep a note of the number somewhere safe in case you should
forget it.
FR
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
3 Touch [OK] to memorize the number.
4 Touch [
] to return to the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
“Do you wish to change Parental level? [OK] [Cancel].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [OK].
When [OK] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password you set in “Setting the
Rating Level (Parental Lock),” then touch [OK].
• To play without changing the parental level, touch [Cancel].
(If [Cancel] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock).”)
51-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 52 Thursday, October 4, 2012 5:03 PM
Sirius XM Setting
[SiriusXM] is selected on the Source setup menu in step 3. Refer to
“Source Setup Operation” (page 49).
Deleting all stored Alert
The operation will delete all stored songs, artists and teams alert
information.
1
Touch [Delete All].
A message is displayed.
Managing Artist, Song and Sports Team
Alerts
The following operations can be performed to manage the stored Songs,
Artists and Sports teams information. (To learn about how to store the
information, refer to “Storing the Desired Song/Artist” on page 76 and
“Setting the Favorite Sports Team Alerts” on page 52.)
Setting item: Alert Setup
Setting the Alert ON/OFF Individually for a Song/Artist/
Sport Team
You can manage the stored Alert (Songs, Artists, Sports teams)
individually by this setting.
1
Touch [Alert List].
The Alert List screen is displayed.
2
Touch [Yes] to clear the information of all stored
Artist, Song, and Game alert items.
Touch [No] to cancel.
Setting the Favorite Sports Team Alerts
This menu option allows you to select your favorite teams, organized by
leagues, so that you will be alerted later when your favorite teams are
playing on other channels. Some sports, individuals are considered
‘teams’.
Setting item: Game Alert Setup
1
Touch [Game Alert Setup].
The Game Alert Setup screen is displayed.
2
Select the desired league.
The display changes to the team list of the selected league.
3
2
Touch the abbreviations for your favorite teams.
Once selected, you will be alerted when games that those
teams are playing in can be heard on a SiriusXM channel.
A “Team Saved X Used/Y Empty” pop up screen is
displayed.
X is the total number of song titles, artist names or sports
team stored in memory, and Y is the total number of memory
song titles, artist names or sports teams still available for
storage.
Touch [On] or [Off] of the desired song, artist or
team.
Set to ON if you want to receive this alert.
Set to OFF if you do not want to receive this alert.
• To delete the list, touch [Delete], and then touch [OK].
Setting ON/OFF of all Songs/Artists/Games Alert
• Teams that you have selected will be indicated with an asterisk “*”.
• If the memory is full, you cannot select a new team.
To add another team alert, you need to delete a selected one first.
Touch the team (with “*” mark) you want to delete, a message will
display. Touch [Yes] to delete it and touch [No] to cancel. You can
also delete a team from the Alertlist, for details, refer to “Managing
Artist, Song and Sports Team Alerts” on page 52.
Determines whether the received alert of all stored Songs/Artist/Games
is set or not.
1
2
Touch [Alert].
Touch [
ON:
OFF:
] or [
] of “Alert” to select ON/OFF.
Set to receive alert.
No alert.
52-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 53 Thursday, October 4, 2012 5:03 PM
Setting the Parental Lock
You can lock out channels with passcode protection. Channels that are
locked cannot be accessed without entering the passcode. You can
unlock a channel or change the passcode using this menu option.
Changing the Lock Passcode
4
The numeric keypad screen is displayed.
5
Setting item: Parental Lock
1
Touch [Parental Lock].
Touch the numeric keypad to input a 4-digit
passcode.
The initial number is 0000.
Input number are displayed as “*” (asterisk).
3
Touch [OK].
Or touch [ ] to cancel entry of the passcode or touch
[Delete All] to erase the digits that you have entered so you
can start over or touch [
] to erase the last digit that you
entered.
After the correct passcode is entered, the Parental Lock
options menu is display.
Clearing the Lock of ALL the locked Channels
4
5
7
8
Now use the keypad to enter the new 4-digit
passcode.
Then use the keypad to enter the new 4-digit
passcode a second time to verify it.
• Remember to keep a note of the passcode in a safe place in case you
forget the code.
Signal Strength Information
Touch [OK] to clear the lock of all the locked
channels.
Setting item: Signal Indicator
Touch [Locked Channels].
The channels list screen is displayed.
This menu item displays the SiriusXM signal strength as Strong, Good,
Weak or No Signal.
• If the Signal Indicator reports Weak or No Signal and your vehicle is
parked outside with no obstructions to the southern sky, then your
SiriusXM antenna may not be properly installed or may have become
damaged.
Select the desired channel.
Touch [
] or [
] to select On/Off.
Touch [
] to return to the previous screen.
EN
FR
Touch [OK].
While listening to a SiriusXM Channel, the Signal strength of the
current channel will be displayed.
Setting the Lock status of individual channels
5
6
7
6
Touch [Clear All Locked Channels].
Touch [Cancel] to cancel.
4
Use the keypad to enter the current (old) 4-digit
passcode.
(The initial passcode is set to 0000).
Touch [Enter] to confirm the entry.
Touch [Delete All] to erase all of the digits that you entered.
Touch [
] to erase the last digit you entered.
Touch [ ] to abort changing the passcode.
The numeric keypad screen is displayed.
2
Touch [Edit Code].
AUX Setting
[Aux] is selected on the Source setup menu in step 3. Refer to “Source
Setup Operation” (page 49).
Setting the AUX Mode
Setting item: AUX In
Setting contents: Off / On (Initial setting)
Off:
On:
AUX source is not displayed.
AUX source is displayed.
53-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 54 Thursday, October 4, 2012 5:03 PM
Setting the Primary AUX Name (AUX
Setup)
When AUX In is set to “ON”, this setting is available.
Setting item: Primary Name
Setting contents: AUX1 (Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG. / DVB-T * / TV
* “DVB-T” is only applicable in Europe/Asia.
• When a DVB-T tuner (sold separately) is connected, you can use it to
connect one more External Input device. Setting the Secondary name
can change the mode name display of this device.
Setting the Secondary AUX Name
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
After setting to “AUX3” in “Setting the AUX3 In Sel.,” this setting can
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Auto:
The video input signal type (NTSC or PAL) will
be automatically selected.
Choose the video input signal type manually.
NTSC/PAL:
RSE Setting
Secondary name can be set only when Primary name is set to “DVB-T.”
Setting item: Secondary Name
Setting contents: Off (Initial setting) / AUX2 / DVD / GAME /
EXT.DVD / DVD-CHG. / TV
• The selected source name is displayed instead of AUX mode name.
[RSE] is selected on the Source setup menu in step 3. Refer to “Source
Setup Operation” (page 49).
Setting the Rear Seat Entertainment
System
Switching the Visual Input Signal System
After setting to “On” in “Setting the AUX Mode,” this setting can be
carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Auto:
NTSC/PAL:
The video input signal type (NTSC or PAL) will
be automatically selected.
Choose the video input signal type manually.
Setting the AUX3
Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable (4pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
Video and audio can be output to the rear monitor.
Setting item: RSE
Setting contents: Off (Initial setting) / On
• If you selected the “On” setting, set the “Remote Sensor Setting”
(page 40).
Setting the BLUETOOTH Pandora®
[BLUETOOTH Pandora] is selected on the Source setup menu in
step3. Refer to “Source Setup Operation” (page 49).
To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting
to “On.”
Setting item: BLUETOOTH Pandora
Setting contents: Off / On (Initial Setting)
• When “On” is set, the BLUETOOTH Pandora® source is displayed
on the Top banner on the Audio/Visual screen.
iPod Video: Set when connected to an iPod or iPhone.
AUX3:
Set when connected to an external input device.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
54-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 55 Thursday, October 4, 2012 5:03 PM
BLUETOOTH Setting
BLUETOOTH Setup
[BLUETOOTH] is selected on the BLUETOOTH setup menu in step
3. Refer to “BLUETOOTH Setup Operation” (page 55).
BLUETOOTH Setup Operation
Off:
On:
To display the BLUETOOTH Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the BLUETOOTH mode operation has
been released. Engaging the parking brake can reactivate the
BLUETOOTH Setup Menu, as long as the car’s ignition has not
been turned off. It is not necessary to repeat the above procedure
(1 through 3) of “To display the BLUETOOTH mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the BLUETOOTH mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of BLUETOOTH Setup. Refer to each section for
details.
1
Touch [
(BLUETOOTH)].
FR
Displaying BLUETOOTH Information
[BLUETOOTH Info] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can display the BLUETOOTH device name and device address of
this unit.
Setting item: BLUETOOTH Info
Registering the BLUETOOTH Device
[Set BLUETOOTH Device] is selected on the BLUETOOTH setup
menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
The BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected from this unit, or a new
BLUETOOTH compatible device is registered.
Touch [Set BLUETOOTH Device].
Touch [Search] of “No Device.”
The Device list displays up to 10 items.
The BLUETOOTH Setup screen appears.
3
BLUETOOTH function is not used.
Select when you would like to pair your BLUETOOTH
compatible phone with this unit.
• If the Bluetooth setting is “Off,” you cannot move to the
BLUETOOTH setting screen.
1
2
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
EN
Setting item: BLUETOOTH
Setting contents: Off / On (Initial setting)
3
Select the desired item.
Touch [Audio], [Hands-free] or [Both] of the
device you want to connect from the list.
Audio:
Sets for use as an Audio device
Hands-free: Sets for use as a Hands Free Device.
Both:
Sets for use as both an Audio device and Hands
Free Device.
• You can connect (pair) up to 5 BLUETOOTH compatible
mobile phones.
4
Setting items: BLUETOOTH / BLUETOOTH Info. / Set
BLUETOOTH Device / AutoConnect / Passcode
Change / Default Phonebook Encoding / Auto
Answer / Auto Answer Time / Phone Speaker /
Ring Tone Volume / Microphone Level / Caller
Volume / Delete Call History
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to
When the device registration is complete, a message
appears and the device returns to normal mode.
• The BLUETOOTH registration process differs depending on the
device version and SSP (Simple Secure Pairing). If a 4 or 6 character
Passcode appears on this device, enter the Passcode using the
BLUETOOTH compatible device.
If a 6 character Passkey appears on this device, make sure the same
passkey is displayed on the BLUETOOTH compatible device and
touch “Yes.”
• If all the 5 devices have been registered, you cannot register the 6th
device. To register another device, you need to delete one of the
devices from position 1 to 5 first.
] to return to the previous screen.
• Immediately after changing the BLUETOOTH Setup (while the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
55-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 56 Thursday, October 4, 2012 5:03 PM
Setting the BLUETOOTH Device
Select one of 5 paired BLUETOOTH compatible devices that you
previously registered.
1
2
Touch [Set BLUETOOTH Device].
Touch [Audio] or [Hands-free] of the device you
want to connect from the Paired Device list.
Deleting a BLUETOOTH Device from the list
You can delete the information of a previously connected
BLUETOOTH compatible device.
1
2
3
Touch [Set BLUETOOTH Device].
Touch [Delete] of the BLUETOOTH compatible
device to delete from the Paired Device list.
Touch [OK].
Changing the Character Code of the
Phone Book
[Default Phonebook Encoding] is selected on the BLUETOOTH setup
menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can select the character code that is used when transferring the
phone book or history from a mobile phone. If unreadable characters
appear in the transferred data, select the correct character code.
Setting item: Default Phonebook Encoding
Setting contents: EU1 / EU2 (Initial setting) / Russian / Chinese /
Thai / Arabic / Unicode UTF-8 / Unicode UTF16LE / Unicode UTF-16BE
1
Touch [Default Phonebook Encoding].
The Character code list screen is displayed.
2
• Touching [Cancel] will cancel the setting.
Touch the desired character code.
EU1:
ISO 8859-1
EU2:
ISO 8859-15
Russian: ISO 8859-5
Chinese: GB18030
Thai:
CP874
Arabic:
CP1256
Unicode UTF-8
Unicode UTF-16LE
Unicode UTF-16BE
Automatic Connection Setting
[Auto Connect] is selected on the BLUETOOTH setup menu in step 3.
Refer to “BLUETOOTH Setup Operation” (page 55).
If the Automatic Connecting setting is “On,” automatic connection is
performed for the BLUETOOTH compatible device registered in the
Paired Device list.
Setting item: Auto Connect
Setting contents: Off / On (Initial setting)
3
Setting the Passcode
Setting Received Calls Automatically
[Pass code Change] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can set the code for connecting with a BLUETOOTH compatible
device.
[Auto Answer] is selected on the BLUETOOTH setup menu in step 3.
Refer to “BLUETOOTH Setup Operation” (page 55).
When a call is received, you can set whether to answer it automatically
or not.
Setting item: Passcode Change
Setting item: Auto Answer
Setting contents: Off (Initial setting) / On
1
Touch [Passcode Change].
A numeric keypad screen is displayed.
2
Touch [OK].
On:
Off:
When a call is received, it will be answered automatically
When a call is received, it will not be answered
automatically
Enter a 4-digit passcode, and then touch [Enter].
• The initial number is 0000.
• For details on how to input the numeric keypad, refer to “Numeric
Keypad Input Operations” (page 35).
56-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 57 Thursday, October 4, 2012 5:03 PM
Setting the Time for Automatic
Reception of a Call
[Auto Answer Time] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
When “Auto Answer” is set to “On,” you can set how many seconds to
let elapse before letting the Auto Answer pick up the call.
Setting item: Auto Answer Time
Setting contents: 5sec / 10sec (Initial setting) / 15sec / 20sec
1
[Caller Volume] is selected on the BLUETOOTH setup menu in step 3.
Refer to “BLUETOOTH Setup Operation” (page 55).
You can adjust the receive volume, during the call.
Setting item: Caller Volume
Setting contents: 1 to 11 (Initial setting: 5)
Deleting All the Histories
Touch [
] or [
].
EN
FR
Touch [Auto Answer Time].
The Auto Answer setting screen is displayed.
2
Adjusting the Caller Volume
[Delete Call History] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
Dialled/Received/Missed Incoming histories are all deleted.
Setting item: Delete Call History
Selecting the Output Speaker
[Phone Speaker] is selected on the BLUETOOTH setup menu in step
3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can select which speaker in the car will output the audio from the
phone.
1
ES
Touch [Delete Call History]
The confirmation screen is displayed.
• When there is no history, this option is not available.
2
Touch [OK].
All the histories are deleted.
Setting item: Phone Speaker
Setting contents: All (Initial setting) / Front L / Front R / Front LR
All:
Front L:
Front R:
Front LR:
The sound is output from all speakers in car.
The sound is only output from the front left speaker.
The sound is only output from the front right
speaker.
The sound is output from the front left and front
right speakers.
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Adjusting the Ring Tone Volume
[Ring Tone Volume] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can adjust the volume of the incoming call.
Setting item: Ring Tone Volume
Setting contents: 1 to 11 (Initial setting: 5)
Adjusting the Microphone Level
[Microphone Level] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 55).
You can adjust the microphone level, during the call.
Setting item: Microphone Level
Setting contents: 1 to 11 (Initial setting: 5)
57-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 58 Thursday, October 4, 2012 5:03 PM
Direct Camera Setting
Camera Setup
[Direct Camera] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 58).
Camera Setup Operation
With an optional camera connected, its video is output to the monitor.
When the camera is connected, set this item.
Setting the Camera Input
Setting item: Camera Select / Guide Adjustment*1
Setting contents: Off (Initial setting) / Front / Rear*2
To display the Camera Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Camera mode operation has
been released. Engaging the parking brake can reactivate the
Camera Setup Menu, as long as the car’s ignition has not been
turned off. It is not necessary to repeat the above procedure
(1 through 3) of “To display the Camera mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Camera mode screen.”
2
Switching video patterns for Rear camera & Front
camera
The video pattern can be changed when connected to HCE-C200R/
HCE-C200F/HCE-C210RD/HCE-C212F.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
2
Touch [Back], [Panorama], [Corner], or [Top].
The view will change to the selected view.
• [Back] will not appear for the Front camera.
Touch [
] to return to the previous screen.
• For an explanation of video patterns, see the camera Owner's
Manual.
Touch [Setup] icon of Top banner.
Adjusting the Rear/Front Camera Guide
The Setup main screen is displayed.
If you select “Rear” or “Front,” you can adjust the camera guide
position.
Touch [
(CAMERA)].
Setting item: Guide Adjustment
The Camera Setup screen appears.
3
Rear camera
Front camera
*1 If “Camera Select” is set to “Off”, this option is not available.
*2 If “Camera Select” in AUX Camera Setting is set to “Rear,”
“Rear” cannot be set in Direct Camera Setting.
3
The following steps 1 to 5 are common operations to each
“Setting item” of Camera Setup. Refer to each section for
details.
1
Rear:
Front:
1
Select the desired item.
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
• If the video pattern is set to “Corner,” the camera guide will not
be displayed.
2
Touch [Adjust].
• If [Adjust] does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [
][
].
Display example for rear camera mode
Setting items: Direct Camera / AUX Camera* / Camera Interrupt
(Power OFF Mode)
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to
] to return to the previous screen.
• Immediately after changing the Camera Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
58-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 59 Thursday, October 4, 2012 5:03 PM
Display example for front camera mode
AUX Camera Setting
[AUX Camera] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 58).
EN
Setting the Camera Input
Setting item: Camera Select / Camera Signal*1/ Guide
Adjustment*1
Setting contents: Off / Rear*2 (Initial setting) / OTHER
4
Touch [ ], [
of the guide.
], [
] or [
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set].
Adjusting guides simultaneously (for Rear camera only)
1
Rear:
OTHER:
] to adjust the position
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
FR
Rear camera
Side camera, Room camera, etc.
*1 If “Camera Select” is set to “Off”, this option is not available.
*2 If “Camera Select” in Direct Camera Setting is set to “Rear,”
“Rear” cannot be set in AUX Camera Setting.
ES
Setting the AUX Camera Signal Input
When the AUX camera is connected, the video input signal type can be
chosen.
Setting item: Camera Signal
Setting contents: NTSC (Initial setting) / PAL
Adjusting the Rear Camera Guide
If you select “Rear” you can adjust the camera guide position.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
2
Touch [Adjust].
• If [Adjust] does not appear, proceed to step 3.
Turning guide display ON/OFF
Turning the selected guide off.
1
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [
][
].
Touch [ON/OFF].
The currently selected guide will turn off.
2
To turn the guide on, touch [ON/OFF] again.
• Guides that are turned off are still adjustable.
Returning guides to default
1
Touch [Default].
A message window will appear.
2
Touch [OK].
4
Adjusted values will return to default settings.
Touch [ ], [
of the guide.
], [
] or [
] to adjust the position
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set].
59-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 60 Thursday, October 4, 2012 5:03 PM
Adjusting guides simultaneously (for Rear camera only)
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display ON/OFF
Turning the selected guide off.
1
Touch [ON/OFF].
The currently selected guide will turn off.
2
To turn the guide on, touch [ON/OFF] again.
• Guides that are turned off are still adjustable.
Returning guides to default
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.
Camera Interrupt Setting (Power OFF
Mode)
[Camera Interrupt] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 58).
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
Setting item: Camera Interrupt (Power OFF Mode)
Setting contents: On (Initial setting) / Off
On:
Off:
The rear camera image is displayed
The rear camera image is not displayed
60-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 61 Thursday, October 4, 2012 5:03 PM
BLUETOOTH
Operation
Setup Before Using
About BLUETOOTH
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
website (http://www.bluetooth.com/).
Before Using BLUETOOTH
Before using the hands-free phone/audio function, the following
settings need to be made.
1
2
Set “BLUETOOTH” to “On” (see page 55).
EN
Register a BLUETOOTH device in this unit (see
page 55).
• Refer to “BLUETOOTH Setting” (page 55).
• You can search for this unit using a BLUETOOTH compatible device,
and then connect that BLUETOOTH compatible device to this unit.
The device name of this unit is “ALPINE NAVI” and the initial
number of the passcode is “0000.” Also refer to the Owner’s Manual
of the connected device(s).
Hands-Free Phone Control
Display example for Phone menu screen
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BLUETOOTH
compatible device, consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
About the Hands-Free Phone
BLUETOOTH devices Name
Favorites Display: Short Cut icon
Hands-free calls are possible when using a HFP (Hands-Free Profile)
compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to obtain the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Dialled/Received/Missed Display: Each histories icon
Connecting a BLUETOOTH Device
Registering a BLUETOOTH device in INE-W927HD enables automatic
connection.
If it does not connect automatically, run through the connection
procedure again.
1
Press the
(PHONE) button.
The Phone menu screen is displayed.
2
Touch [Connect].
BLUETOOTH connection will start.
Disconnecting the BLUETOOTH
Connection
Touch [Disconnect].
The BLUETOOTH connection is disconnected.
61-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 62 Thursday, October 4, 2012 5:03 PM
Changing the connecting BLUETOOTH
Device
If multiple BLUETOOTH devices are registered in this device, you can
change the connection among the registered devices.
1
(PHONE) button.
Press the
The Phone menu screen is displayed.
2
Touch [Change].
The Set Bluetooth Device screen is displayed.
3
Touch [Audio] or [Hands-free] of the selected
device.
• You can check registered shortcut dialing by touching the
BLUETOOTH Device List.
For how to assign one-touch dialing, refer to “Assigning as a Short
Cut Dialing Number” (page 64).
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE No., etc.).
2
Use the Phone menu screen to make a phone call.
Using Short Cut Dialing to Make a Call
You can assign up to 4 phone numbers for one-touch dialing to make a
call easily. For how to assign one-touch dialing, refer to “Assigning as a
Short Cut Dialing Number” (page 64).
1
(PHONE) button.
Press the
The phone menu screen is displayed.
The connection will transfer to the selected device.
1
Calling
An incoming call triggers the ringtone and an
incoming call display.
Touch [
] or press
(PHONE) button.
The call starts.
• When “Setting Received Calls Automatically” (page 56) is set to
“On,” you can receive a call automatically.
• During a call, the audio for the current mode on the unit is muted.
After calling, playback will resume.
• When the caller’s number is transmitted to the system, if the caller’s
name is stored in the phone book, the name is displayed. If the name
is not stored, the number is displayed. When neither the name or the
number is unavailable, “Unknown” is displayed.
Adjusting Ringtone Volume
2
3
Touch [
Favorites].
Touch [Dial1], [Dial2], [Dial3] or [Dial4].
The phone call is sent to the stored number.
• Pressing and holding [Dial1], [Dial2], [Dial3] or [Dial4] displays
the Shortcut Dialing Edit screen. The only available editing
operation is deletion.
• If a name has been registered, the name is displayed on the shortcut
button.
Dialing a Number in Call History
You can use 3 types of history to make a phone call. Call History saves
up to 60 phone numbers. If the limit is exceeded, the oldest phone
number is deleted.
1
(PHONE) button.
Press the
The phone menu screen is displayed.
2
Touch [
Missed].
Dialled], [
Received] or [
The last four histories are displayed.
3
Touch the name from the call history.
The details screen of the call history is displayed.
• To display all the histories, touch [All]. Touching [Delete]
deletes the selected histories.
4
Touch [
].
The phone call is started.
The ringtone volume is adjustable on the incoming call message screen.
Touch [ ] or [ ] for “Vol.”
Hanging up the Telephone
Touch [
].
The call finishes.
62-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 63 Thursday, October 4, 2012 5:03 PM
Dialing a Number in the Phone Book
You can use the phone book of the mobile phone to make a phone call.
Before using, you need to transfer the phone book from the mobile
phone to the system. For details on how to transfer the phone book, refer
to “Synchronizing the Phone Book” (page 63).
1
4
Touch
.
Touch the person name or the telephone number
from the Phone Book list.
Touch [
(PHONE) button.
Press the
EN
Touch [
FR
].
• Depending on the mobile phone, this operation may not be possible.
DTMF (Touch-Tone) Function
Touch
1
.
Enter the phone number you wish to call.
Touch [
] to turn up the
Changing the Voice Output
Transmits a DTMF (Touch-Tone) during a call.
• You can enter up to 31 digits.
4
5
You can adjust the volume in 11 levels.
Touch [ ] to turn down the volume. Touch [
volume.
The phone menu screen is displayed.
The number input screen appears.
3
: Outgoing volume
The voice output for calls is switchable between car speakers and the
mobile phone speaker.
].
Entering a Phone Number to Make a Call
2
Touch [ ] or [ ] for “Vol.”
(PHONE) button.
Press the
The phone call is started.
1
You can adjust the transmit volume and receive volume respectively.
: Incoming volume
The phone menu screen is displayed.
2
3
Adjusting the Speech Volume
Touch [Tone].
The number input screen appears.
2
Input number.
• You can transmit a Touch-Tone signal during a call.
• Touching and holding “0” initiates “+” tone transmission.
].
Touch [Call].
The phone call is started.
Phone Book Function
Redial Function
Display example for Phone Book screen
You can redial the person you have previously called.
1
Press the
(PHONE) button.
The phone menu screen is displayed.
2
Touch [Redial].
The number is redialed.
3
Touch [Call].
The phone call is started.
An icon is displayed to indicate that multiple phone
numbers are registered under an entry.
Operations During a Conversation
Display example
Synchronizing the Phone Book
You can synchronize the system’s phone book with the mobile phone’s
phone book.
1
Press the
(PHONE) button.
The phone menu screen is displayed.
2
3
Name and phone number
Conversation time
4
Touch [
].
Touch [Download].
Touch [SYNC].
Synchronization of the phone books starts.
63-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 64 Thursday, October 4, 2012 5:03 PM
• You can store up to 1,000 phone numbers in the phone book for
USER1 and USER2, respectively.
• You can store up to 5 phone numbers by one person’s name.
Adding the Phone Book
1
(PHONE) button.
Press the
The phone menu screen is displayed.
2
3
4
Touch [
Assigning from Call History
1
Touch [Download].
Touch [Add].
The mobile phone accesses this unit and then
transfers the phone book from the mobile phone to
this unit.
• Mobile phone connection is canceled while the phone book is being
transferred.
2
1
2
Press the
3
4
5
Touch [Save].
The phone number is assigned to the selected Short Cut
dialing number.
• If Dial1, Dial2, Dial3 or Dial4 is already registered, it is overwritten.
• Touch [Delete] to delete an assigned short cut dialing number.
(PHONE) button.
Assigning from the Phone Book
Touch [
1
].
Touch the phone number you intend to delete.
Press the
(PHONE) button.
The Phone menu screen is displayed.
2
Touch [
].
The Phone Book screen is displayed.
Touch [Delete].
3
Press the
(PHONE) button.
The Phone menu screen is displayed.
Touch [
].
Touch the phone number you intend to assign as the
Short Cut dialing number.
The details screen of the Phone book is displayed.
4
Touch [OK].
Deleting All Entries from the Phone Book
2
Touch [Preset].
The details screen for the Short Cut is displayed.
Touch [Preset].
The details screen for the Short Cut is displayed.
The selected number is deleted.
1
Touch the person name you intend to assign as the
Short Cut dialing number.
The Phone menu screen is displayed.
The confirmation screen is displayed.
If multiple phone numbers are registered, they are all
deleted.
5
Touch [Dialled], [Received] or [Missed].
The details screen of the Phone book is displayed.
• To display all the histories, touch [All]. Touching [Delete]
deletes the selected histories.
The Phone Book screen is displayed.
3
4
(PHONE) button.
The last four histories are displayed.
Deleting the Phone Book Entries
Deleting One Entry from the Phone Book
Press the
The Phone menu screen is displayed.
].
Stays on standby for connection of the mobile phone.
• Touch [Cancel] to cancel the standby mode.
5
Assigning as a Short Cut Dialing Number
5
Touch [Save].
The phone number is assigned to the selected Short Cut
dialing number.
• If Dial1, Dial2, Dial3 or Dial4 is already registered, it is overwritten.
• Touch [Delete] to delete an assigned short cut dialing number.
The Phone Book screen is displayed.
3
Touch [Delete All].
The confirmation screen is displayed.
4
Touch [OK].
All entries of the phone book are deleted.
64-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 65 Thursday, October 4, 2012 5:03 PM
Call Waiting Function
If a call comes in from another phone during a call, a notice is displayed
on the screen. This function can only be used if the connected mobile
phone has a call waiting function service included.
BLUETOOTH Audio
If a BLUETOOTH compatible mobile phone, portable player, etc. is
connected by wireless, you can play back a song (operation is
controllable from the unit).
Receiving calls during a current call
EN
Display example for BLUETOOTH Audio main screen
If a new call comes in during a current call, a screen allowing you to
negotiate the new call is displayed.
FR
ES
Touch [<<], [>>]
Touch [
] to take the new call and put the current
party on hold.
Touch [
] to not take the new call and continue
your call with the current party.
Touch [
] to end your call with the current call and
take the new call.
Switching calls
Song title
Artist title
Album title
Elapsed time
BLUETOOTH devices Name
• The displayed onscreen buttons may differ depending on the AVRCP
version.
• Status Indicator/Song title/Artist title/Album title/Elapsed time do not
display for AVRCP Ver. 1.0.
• To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the BLUETOOTH audio source is muted.
Compatible AVRCP versions: 1.0, 1.3, 1.4
• Available functions may differ depending on the AVRCP version.
Touch to switch the call.
• This unit supports only the Call Waiting function of a mobile phone.
The second call function and three-way calling function of a mobile
phone cannot be operated from this unit. Also the screen display may
malfunction.
Playback
1
2
3
(SOURCE) button.
Press the
Touch [BLUETOOTH-AUDIO] of Top banner.
Touch [
(file).
] or [
] to select the desired track
Returning to the beginning of the current file:
Touch [
].
Fast backward the current file:
Touch and hold [
].
Advance to the beginning of the next file:
Touch [
].
Fast forward the current file:
Touch and hold [
4
].
To pause playback, touch [
/
].
65-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 66 Thursday, October 4, 2012 5:03 PM
Repeat Play
Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [
] during playback.
The repeat mode switches every time the button is touched.
(FILE)
Operating Auxiliary Devices (Optional)
(GROUP)
To operate devices connected to the AUX terminals of INE-W927HD,
follow the procedure described below.
(ALL)
• Set AUX In to “On.” Refer to “Setting the AUX Mode” (page 53).
• Depending on the connected unit, the onscreen buttons may not
work, or their operation may differ.
(OFF)
• Operations may differ depending on the connected BLUETOOTH
compatible device.
M.I.X. (Random Play)
] during playback.
The M.I.X. mode switches every time [
WARNING
It is dangerous (and illegal in many states) for the
driver to watch TV/video while driving the vehicle. The
driver may be distracted from looking ahead and an
accident could occur.
Install the INE-W927HD correctly so that the driver
cannot watch TV/video unless the vehicle is stopped
and the emergency brake is applied.
Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [
Auxiliary Device
(Optional)
] is touched.
(GROUP)
If the INE-W927HD is not installed correctly, the driver
will be able to watch TV/video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
(ALL)
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
(OFF)
• Operations may differ depending on the connected BLUETOOTH
compatible device.
1
2
Press the
(SOURCE) button.
Touch [AUX1]*1, [AUX2]*1 or [AUX3]*2 of Top
banner.
The AUX mode screen is displayed.
Selecting Groups
Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [
Group] or [Group
] to select the group.
*1 The name which is given as the mode name in “Setting the Primary
AUX Name (AUX Setup)” (page 54) and “Setting the Secondary AUX
Name” (page 54) is displayed.
2 When “Setting the AUX3” (page 54), AUX3 appears when setting
*
”AUX” only.
Search Function
Available for AVRCP Ver. 1.4 only.
The displayed list differs with the connected BLUETOOTH device.
Touch [
(Search)] of Bottom banner during
playback.
Select the track, etc., you want to listen to from the displayed list.
66-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 67 Thursday, October 4, 2012 5:03 PM
AUX Operation Screen Display During Video File
Playback
Touch the screen.
The AUX operation screen is displayed.
Example for AUX1, AUX2, AUX3, DVD, Game mode
display
About the DVD Operation Screen
When the external DVD player playback screen is displayed, you can
touch the screen to display the operation screen. For details on how to
operate, refer to the Owner’s Manual of the connected DVD player.
EN
External DVD player display example
FR
Touch [<<], [>>]
• The operation screen changes to the visual screen in the AUX
mode for 5 seconds after an operation has been performed. To
hide the AUX operation screen, touch the video display area.
Touch the display panel to display the operation screen
again.
• Setting the AUX name for EXT.DVD, DVD-CHG, DVB-T, and TV
mode displays their individual operation switches and enables
operation. Refer to “Setting the Primary AUX Name (AUX Setup)”
(page 54) and “Setting the Secondary AUX Name” (page 54).
[
]
Touch the switch to go back to the beginning of the current
chapter/track/file. Touch the switch once more to find the
beginning of the previous chapter/track/file. Touch and hold
to fast reverse.
[
Operating an External DVD Player
To operate an External DVD player (Optional), set “Setting the Primary
AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX
Name” (page 54) to “EXT.DVD.”
[
1
2
[
(SOURCE) button.
]
Starts/Stop repeat play.
/
]
Switches between play and pause.
[
Press the
]
Starts/Stop M.I.X. play.
[
Change to the External DVD Mode
]
Touch the switch to advance to the beginning of the next
chapter/track/file. Touch and hold to fast forward.
]
Touching during play initiates a pre stop. Touching again
stops play.
Touch [EXT.DVD] of Top banner.
[Top Menu]
The display shows the EXT. DVD mode screen.
Calls up the Top Menu screen.
[Menu]
Calls up the Menu screen.
[Menu Control]
Calls up the menu operation mode.
[
]
Switches the program/playlist/folder down.
[
]
Switches the program/playlist/folder up.
[Angle]
Switches angle.
[Audio]
Switches audio.
[Sub Title]
Switches sub titles.
67-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 68 Thursday, October 4, 2012 5:03 PM
Menu operation mode screen display example
About the DVD Changer Operation Screen
When the External DVD changer playback screen is displayed, you can
touch the screen to display the operation screen. For details on how to
operate, refer to the Owner’s Manual of the connected DVD changer.
• The DVD-CHG. operation mode screen and the Menu operation
mode screen are the same as the external DVD player operation
screen. Refer to ”Operating an External DVD Player.”
External DVD changer display example 3/3 (Info
mode)
[Key]
The menu operation mode will be displayed.
[
], [
]
Moves key panel location.
[
]
Closes menu operation mode.
[
]
Closes key panel.
[
], [
], [
], [
Touch [<<], [>>]
]
Moves menu cursor.
[Enter]
Determines the selected item.
[Disc1]-[Disc6]
[Return]
Selects a Disc.
Returns to the previous item/screen.
Operating an External DVD Changer
To operate an External DVD changer (Optional), set “Setting the
Primary AUX Name (AUX Setup)” (page 54) or “Setting the Secondary
AUX Name” (page 54) to “DVD-CHG..”
Change to the External DVD Changer Mode
1
2
Press the
(SOURCE) button.
Touch [DVD-CHG.] of Top banner.
The display shows the DVD-CHG. mode screen.
Operating the Mobile Digital TV
Receiver (DVB-T)
To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set
“Setting the Primary AUX Name (AUX Setup)” (page 54).
• “DVB-T” is only applicable in Europe/Asia.
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode
1
2
Press the
(SOURCE) button.
Touch [DVB-T] of Top banner.
The display shows the DVB-T mode screen.
68-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 69 Thursday, October 4, 2012 5:03 PM
About the DVB-T Operation Screen
When you touch the screen in the DVB-T mode, the operation screen is
displayed. For details on how to operate, refer to the Owner’s Manual of
the connected Digital TV Receiver (DVB-T).
Operating a TV
To operate a TV Receiver (TV) (Optional), set “Setting the Primary
AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX
Name” (page 54) to “TV.”
Menu operation mode screen display example
EN
Change to the TV Mode
1
2
(SOURCE) button.
Press the
FR
Touch [TV] of Top banner.
The display shows the TV mode screen.
About the TV Operation Screen
[
]
When the TV playback screen is displayed, you can touch the screen to
display the operation screen. For details on how to operate, refer to the
Owner’s Manual of the connected TV.
Switches the Channel number/ Favorite channel number
down.
[
]
Switches the Channel number / Favorite channel number
up.
[TUNE] (Channel or FAV)
Switches between the Channel mode and the Favorite
channel mode.
[EPG]
Call up the Electronic Program Guide (EPG).
[Menu]
Touch [<<], [>>]
Call up the menu screen.
[Menu Control]
Call up the menu operation mode.
[A/V]
Switches the source.
[
[Scan]
Switches the Channel number / Preset channel / frequency
down.
Touch the switch to start the scan procedure.
[
], [
], [
]
]
Switches the Channel number / Preset channel / frequency
up.
[TUNE] (Channel or PRESET or MANUAL)
Switches amongst Channel mode, Preset mode, and
Manual mode.
[Band]
Switches the band.
[A.Memo]
The tuner automatically seeks and stores stations.
69-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 70 Thursday, October 4, 2012 5:03 PM
Camera Operation
(Optional)
When an optional camera is connected, the view video of camera can be
output to the monitor.
Front camera or Rear camera can be connected to this unit.
Depending on your camera, please choose the connection method
(Direct or AUX) and camera type (Front, Rear or OTHER) first. For
details, refer to “Camera Setup” (page 58).
Front camera:
Switching the Image Pattern for the Rear
Camera
If the camera has a view switch function, the Direct Change switch is
displayed.
1
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Rear camera:
Other camera:
Set when connecting to a camera other than the Front camera or
Rear camera, such as a room camera and side camera.
You can adjust the quality of the camera image.
Setting items: Live Contrast / Bright / Colour / Contrast
Refer to “Visual Setting” (page 41).
Rear Camera Operation
• For detailed information about image patterns, see the camera
Owner's Manual.
Guide Display ON/OFF Setting
1
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Never depend solely on the camera when backing up. Always turn
and look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Guide OFF] on the Rear camera display
screen.
The guide disappears, and then the [Guide OFF] switch
changes to [Guide ON].
Set “Rear” for “Direct Camera Setting” (page 58) or “AUX Camera
Setting” (page 59).
Displaying the Rear View Video while the
Car is in Reverse
Touch [Back], [Panorama], [Corner] or [Top].
The image pattern changes.
[Back]:
Rear View
[Panorama]: Panorama View
[Corner]:
Corner View
[Top]:
Ground View
When the HCE-C212F/HCE-C200F is connected, conditions in
front of the vehicle, such as objects, people and other hazards,
can be seen.
If an HCE-C210RD/HCE-C200R/HCE-C117D/HCE-C107D/HCEC115/HCE-C105 camera is connected, when the vehicle is
reversed, the rear camera view (guide marks for vehicle width
and available distance) is displayed automatically on the screen
of this unit.
Touch the screen when the image from the rear
camera is displayed.
3
Touch [Guide ON] to turn on the guide.
Adjusting the Caution Display Location
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Caution
].
• For each touch, the caution location moves to the top or bottom of the
screen.
70-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 71 Thursday, October 4, 2012 5:03 PM
About the Rear Camera Guide
To display the guide, set “Guide Display ON/OFF Setting” (page 70) to
On. Also, to adjust the guide, refer to “Adjusting the Rear/Front Camera
Guide” (page 58). You can also turn off the guide in the Rear camera
display screen.
Distance guidance mark
The distance guides represent the ground level distance from the rear
bumper. It is difficult to accurately estimate the distance to objects
above ground level.
<Screen>
EN
Indication mark meaning
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car's width and
distance from the rear bumper.
C
B
A (about 0.5 m)
<Positions of A, B and C>
ES
about 1 m
1 Car width extension marks (red, yellow and green in
order of distance)
If properly calibrated, the marks indicate the car's width.
This helps guide the car’s path when backing up in a
straight line.
The marks represent the distance from the rear of the car
(from the rear end of the bumper).
• The marks do not move in synchronization with the
steering wheel.
2 Distance guidance marks
The marks represent the distance from the rear of the car
(from the rear end of the bumper).
• The marks do not move in synchronization with the
steering wheel.
• Each center position of the mark represents about 0.5 m
(red), about 1 m (yellow) and about 2 m (green) behind.
• Depending on the condition of the car or road surface, the range of
vision may vary.
• The camera has a limited range of vision. Objects at extreme angles
to the camera (e.g. under the bumper or at opposite ends of the
bumper) may not be in the its field-of-vision.
• The rear camera image may have a tint which is different from the
actual surroundings.
• Depending on the car, the guidance may deviate to the right or left.
This is not a malfunction.
FR
In the screen, according to the distance guidance marks,
the truck seems to be parked about 1 m away (at the
position B). In actual fact, however, if you reversed to
position A, you would collide with the truck.
In the screen, positions A, B and C seem to be located in
order of proximity. However, in actual fact, the position A
and C are the same distance, and B is farther away than
positions A and C.
• The car width extension mark represents the distance to the road
surface. The distance to an object on the road is not accurately
represented by the guides.
• In the following conditions, screen visibility may be impaired. This is
not a malfunction.
- When it is dark (during the night, etc.).
- Under very high or very low temperature conditions.
- When water drops adhere to the camera, or when the humidity
is high (such as rainy weather, etc.).
- When foreign bodies (such as mud, etc.) adhere to the camera
or its peripheral area.
- When sunlight or headlights directly strike the camera lens.
- When a CCD camera is connected, smearing* may occur. This
phenomenon is peculiar to CCD cameras.
* Smear phenomenon:
A phenomenon which occurs when a high-intensity spot (such
as a reflection of the sunlight on a car body) is shot by the
camera. The picture below is an example of 'vertical smear'
common to CCD cameras.
A high-intensity spot
71-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 72 Thursday, October 4, 2012 5:03 PM
Error between the screen and the actual road surface
In the following conditions, errors are produced between the screen
guidance and the actual road surface. (The illustrations represent a case
when the camera is installed in the standard position.)
When there is a steep downward slope behind the
car (example)
<Screen>
When there is a steep upward slope behind the car
(example)
<Screen>
<Situation of the car>
Distance guidance marks
<Situation of the car>
Actual distances
Error
Error Error
The distance guidance mark represents the distance to a
flat road surface. Therefore in the case of an upward
slope behind the car, the distance guides are displayed
closer to the rear bumper than the actual distance. For
example, if there is an obstacle on the upward slope, it
may appear farther away than its actual position.
Also, an error may occur between the guidance and the
actual path of the car on the road surface.
Error
In the case of a downward slope behind the car, the
distance guides are displayed farther from the rear
bumper than the actual distance.
If there is an obstacle on the downward slope, it seems
closer than its actual position.
Also, an error may occur between the guidance and the
actual path of the car on the road surface.
Front Camera Operation
Set “Front” for “Direct Camera Setting” (page 58).
Displaying the Front View Video Manually
1
Press the
(My Favorites) button.
The Favorites screen is displayed.
2
Touch [Camera].
The Camera mode is activated and the front view video is
displayed.
When the front camera (direct camera) and rear camera or
side camera (AUX camera) are connected simultaneously,
the screen for selecting which camera image to display
appears.
Switching the Image Pattern for the Front
Camera
1
Touch the screen when the image from the front
camera is displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
72-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 73 Thursday, October 4, 2012 5:03 PM
2
Touch [Panorama], [Corner] or [Top].
The image pattern changes.
[Panorama]: Panorama View
[Corner]:
Corner View
[Top]:
Ground View
• For detailed information about image patterns, see the camera
Owner's Manual.
EN
About the Adjustment of Guide Display
ON/OFF Setting and Adjustment of Caution
Display Location
FR
As with the rear camera, the front camera guide display ON/OFF setting
and Caution display location can be adjusted. Refer to “Guide Display
ON/OFF Setting” (page 70) and “Adjusting the Caution Display
Location” (page 70) for the operations.
ES
Other Camera Operation
Set “OTHER” for “AUX Camera Setting” (page 59).
1
Press the
(My Favorites) button.
The Favorites screen is displayed.
2
Touch [Camera].
When the front camera (direct camera) and rear camera or
side camera (AUX camera) are connected simultaneously,
the screen for selecting which camera image to display
appears.
About the Adjustment of the Caution
Display Location
As with the rear camera, the Caution display location for other cameras
can be adjusted. Refer to “Adjusting the Caution Display Location”
(page 70) for the operations.
73-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 74 Thursday, October 4, 2012 5:03 PM
SiriusXM Satellite
Radio (Optional)
Tuning Channels by Category
Channels are grouped into categories based on the type of content heard
on the channels.
1
SiriusXM Tuner operation:
Touch [Category] on the SiriusXM main screen to
activate the category browsing mode.
When an optional SiriusXM Tuner is connected to this unit,
the following operations may be performed.
The channels within the category of the current channel are
listed.
Display example for SiriusXM main screen
Display example of category browsing mode screen
Touch [<<], [>>]
Touching the [Info] button changes the display of
information for the channels in the category with the
following three options.
Channel NO./Channel Name
Channel NO./Artist
Name
Channel NO./Song Title
Channel NO./
Channel Name
Band display
Displays the band of the signal currently being received.
Channel name
Category name
Channel No.
Preset button
2
Displays the preset channel name or channel number.
TAG Indicator
Blinks during tagging.
Receiving Channels with the SiriusXM
Tuner
Touch Category [ ] or [ ] on the category
browsing mode screen to select a desired category.
The Category Name is shown at the top of the display.
3
Select the desired channel number.
• If no operation is performed for 10 seconds, the category browsing
mode is canceled.
Changing the Display
About SiriusXM Satellite Radio
Everything worth listening to is on SiriusXM, getting over 130
channels, including the most commercial-free music, plus the best
sports, news, talk and entertainment. A SiriusXM Tuner and
Subscription are required. For more information, visit
www.siriusxm.com.
• The SiriusXM Satellite Radio controls on this unit are available only
when a SiriusXM Tuner is connected.
1
Press the
Touch the [SiriusXM] of Top banner.
The SiriusXM main screen display appears.
• The SiriusXM source selection icon will not be listed if the
SiriusXM Tuner is not connected properly. Check the tuner
connections if the icon is not shown.
3
Touch [Info] in SiriusXM mode.
Each time you touch this button, the display changes as shown
below.
(SOURCE) button.
The Home screen is displayed.
2
Text information, such as the channel name, artist name/feature, and
song/program title, is available with SiriusXM or channel. The unit can
display this text information as explained below.
Channel Name
Category Name
Channel No.
Category Name
Artist Name
Song Name
Content Name
Touch [ ] or [ ] to select the desired channel.
Touching and holding either button will rapidly
browse through the channels.
• Refer to the SiriusXM Tuner User Guide for details on how to install
the SiriusXM Tuner.
74-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 75 Thursday, October 4, 2012 5:03 PM
Checking the SiriusXM Radio ID Number
Search Function
To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:
1
1
While receiving SiriusXM Radio, touch [
select channel “0”.
] or [
] to
The unit displays the ID number.
2
To cancel the ID number display, change the channel
other than “0”.
• The SiriusXM Radio ID does not contain the letters I, O, S, or F.
Storing Channel Presets
You can store 18 of your favorite SiriusXM channels for easy recall
with Preset buttons.
1
Touch [Band] to select the desired band you want to
store the preset in.
There are 3 Satellite Radio Preset bands. Each touch of
[Band] changes the band:
SiriusXM-1
SiriusXM-2
SiriusXM-3
SiriusXM-1
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; SiriusXM-1, SiriusXM-2 and
SiriusXM-3.)
• If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the
new one.
Tuning Channels Using Presets
1
2
Touch [Band] of Bottom banner repeatedly until the
desired band is displayed.
Touch any one of the preset buttons that has a
station stored to it.
The preset station is received.
Touch [
(Search)] of Bottom banner.
Search list screen is displayed.
2
EN
Touch the desired category.
The channel name search screen of the selected category
is displayed.
3
Touch the selected channel.
• You can change the category directly by touching Category [
[ ] on the channel name search screen.
] or
FR
Searching by Channel
1 Touch [All Channels] after step 1.
All Channels will be displayed in a list.
2 Touch the selected channel.
ES
• Touch [Info] on the channel name search screen, the information of
the broadcasting channels will be displayed. You can choose the
desired channel from the artist name list or song name list.
Each time you touch the [Info] button, the display changes
as below.
Channel name
Artist name
Song name
Channel
name
Searching by My Music
1 Touch [My Music].
The artist names and song names that you have stored
and are currently playing will be displayed in a list.
Displayed only when the stored song or artist is
broadcasting.
2 Touch the desired artist/song.
The channel of the selected artist/song being broadcast
is received.
• Touch [Info] on the channel name search screen, the information of
the broadcasting channels will be displayed. You can choose the
desired channel from the artist name list or song name list.
Each time you touch the [Info] button, the display changes
as below.
Channel name
Artist name
Song name
Channel
name
Searching by My Games
1 Touch [My Games].
The sport teams that you have stored and the game is
currently broadcasting will be displayed in a list.
Displayed only when the game of stored team is
broadcasting.
2 Touch the desired team.
The channel of the selected game being broadcast is
received.
• Touch [Info] on the channel name search screen, the information of
the broadcasting channels will be displayed. You can choose the
desired channel from the league name list or team name list.
Each time you touch the [Info] button, the display changes
as below.
Channel name
League name
Team name
Channel name
75-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 76 Thursday, October 4, 2012 5:03 PM
Selecting the Channel Directly
Receiving and Tuning to an Alert
You can directly select the channel number on the display of the
numeric keypad.
Whenever a stored sports team, artist, or song is playing on another
channel, an interruption ALERT appears on the unit display. To tune to
the game, artist or song identified by the alert, follow the steps below:
1
Touch [Direct Channel].
The numeric keypad input screen is displayed.
2
3
1
Touch to input the channel number.
Touch [Enter].
The selected channel is received.
2
While listening to SiriusXM Satellite Radio, you can be alerted when
your favorite songs or artists are playing on other channels. An
interruption ALERT will be displayed when a matching artist or song is
found on another channel. For receiving interruption ALERT
information, refer to “Activating the stored Alert” below.
1
Touch and hold [Memo] for at least 2 seconds on
the SiriusXM mode screen.
The Memory type selection screen is displayed.
2
Touch the Store Song or Store Artist to select the
store type.
A “Song (Artist) Saved X Used/Y Empty” pop up screen is
displayed.
X is the total number of song titles, artist names or sports
team stored in memory, and Y is the total number of memory
song titles, artist names or sports team still available for
storage.
• “Artist /Song Unavailable” appears on the display if both the artist
and song is not available to be stored.
“Artist (Song) Unavailable” is displayed if the artist (song) is not
available to be stored.
“Artist (Song) Saved” is displayed if this Artist (Song) was
previously stored.
• If there is no memory space, “Memory Full” is displayed and then
you are asked if you want to replace a stored item. If you select
“OK,” then the list to stored alert items are displayed. Touch the item
that you want to replace.
• For details on how to set up the Games Alert, refer to “Setting the
Favorite Sports Team Alerts” (page 52).
Touch the channel on the list you want to receive.
The display changes to the selected channel and the
channel is received.
• When a triple-digit channel number is input, it is unnecessary to
touch [Enter]; the channel will be received automatically.
Storing the Desired Song/Artist
When stored information is broadcast, after
displaying “Song Alert”, “Artist Alert” or “Game
Alert”, the screen changes to My Music list*1 or My
Games list*2 display.
*1 Only for Song Alert and Artist Alert.
*2 Only for Game Alert.
• If [
] is touched, return to the previous screen.
• If no operation is performed for 10 seconds, or [ ] is touched, the
screen returns to the normal mode screen.
Replay Function
In SiriusXM mode, you can pause, rewind and replay up to 30 minutes
of live Satellite Radio.
1
Touch [ /
content.
The “
2
] to Pause playing of the channel
(Pause)” icon and replay progress bar is displayed.
Touch [ / ] again or touch [ ] in the middle of
the screen to resume playing the content.
The “
(Play)” icon lights up and offset playback
commences.
• The time difference between the real broadcasting time and the
offset playback time is displayed.
3
Touch [ ] to exit Instant Replay and listen to live
content.
• To fast reverse, touch and hold [
] and to fast forward, touch
and hold [
].
• Touching [
] or [
] will move a track up/down.
• If you change channels while in Replay mode, the contents of the
replay buffer are emptied.
• Contents older than 30 minutes are automatically emptied from the
replay buffer.
76-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 77 Thursday, October 4, 2012 5:03 PM
Parental Lock Function
This function can help restrict the listening of channels to children of
appropriate age levels only. For information on setting the Parental
Control passcode, refer to “Setting the Parental Lock” (page 53).
When a locked channel is selected, “Channel Locked” is displayed and
then the numeric keypad appears for you to enter the passcode.
Input the 4-digit passcode you set in “Setting the
Parental Lock” on page 53.
The initial number is 0000.
• If you input a wrong passcode, “Incorrect passcode” is displayed.
• After entering the correct passcode, you can access all locked
channels without entering the passcode again until the unit is
powered off and then back on.
• When the memory of iPod/iPhone is full, “iPod memory full, Tag
count X” is displayed. The tag information will be stored to the unit.
• If the tagging operation is interrupted by a hands-free phone call, the
tagging operation will be canceled and the unit will display “Cannot
Tag”.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “Tuner memory full. Connect iPod.” may
be displayed.
• When the iPod/iPhone is disconnected from the unit during tagging,
its tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information
will be transferred to the iPod/iPhone automatically. When the iPod/
iPhone memory becomes full, “iPod memory full.” will be displayed,
and any remaining tag information on the unit will not be transferred
to the iPod/iPhone.
• If tag information already exists, “Already Tagged” will be displayed
when you try to tag information again.
The Jump Channel is a special channel that you can jump to with the
press of a dedicated button and then jump back to the previous channel.
This channel is often used to select your favorite SiriusXM traffic and
weather report channel.
2
FR
ES
Using Jump Memory and Jump Recall
Function
1
EN
To store the Jump channel in memory, touch and
hold [JUMP] for at least 2 seconds.
Touch [JUMP] to recall and tune to the saved Jump
channel.
• Only one channel can be stored as the jump source channel. When
you want to store a new channel, the old channel will be cleared and
the new one will be memorized.
Storing the Tag Information
iTunes Tagging lets you tag songs heard on SiriusXM channels. Using
this unit in conjunction with an optional SiriusXM Tuner and a Tagging
compatible iPod/iPhone, you can tag the music that you listen to, then
transfer the tag information to your iPod/iPhone, and later, when your
iPod/iPhone is connected to iTunes, you can preview, buy and download
your tagged songs. For details, refer to the Owner’s Manual of the
Tagging compatible iPod/iPhone.
When a desired song is heard on an SiriusXM channel, touch the [TAG]
icon to save its tag information
When tagging is allowed,
the TAG icon is displayed.
If no iPod/iPhone is connected, “Tag Count X” is displayed (X is
the total amount of the tag information stored in this unit).
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
77-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 78 Thursday, October 4, 2012 5:03 PM
Playback
USB Memory
(Optional)
1
2
You can play back music files (MP3/WMA/AAC) and video files
(DivX® ) stored in a USB memory device on the internal player of this
system.
This section explains music operations only. Refer to the DivX®
operation section in “DVD” (page 33) for information on video.
• If the first file played is a music file, the mode will be the music play
mode. If the first file played is a video file, the mode will be the video
play mode. Also, the mode changes by selecting “Music” or “Video”
in step 2 in Search Function. Refer to “Searching for a Desired
Song” (page 79) and “Searching for a Desired Video File”
(page 37).
Display example for the USB main screen (Info mode)
Touch [USB] of Top banner.
The USB mode is activated and the display changes to the
USB screen.
3
Touch [
(file).
] or [
] or to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
Fast reverse :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
4
Audio mode
(SOURCE) button.
Press the
].
To pause playback, touch [
/
].
[ ] is displayed in the middle of the screen.
Touch [ / ] again or touch [ ] in the middle of the screen
to start playback.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name).
• If the combined number of files/folders in the USB memory devices
reaches 10,000, the message “The system has reached its limit of
recognizable files/folders from the USB device.” will be displayed. To
delete the message, remove the USB memory devices.
Video mode
Repeat Play
Touch [<<], [>>]
Operation differs depending on whether the most recent song search
was a Tag Search or a Folder/File Search.
Touch [
] during playback.
The repeat mode switches every time the button is touched.
• Refer to “Display example for MP3/WMA/AAC main screen”
(page 30) and “Display example for DivX® main screen” (page 33)
for screen element explanations.
• You can display artwork during USB playback.
Folder/File Search mode:
Repeat
Repeat Folder*
(OFF)
Repeat
Tag Search mode:
About creating a tag information library
You can scan music files in a USB memory device and create a library
of tag information in this unit. Library creation starts when the USB
memory device is connected. The time it takes to create the library
depends on the number of files in the USB memory device, but it may
take several minutes.
Repeat
(OFF)
Repeat
* Only files in a folder are repeatedly played back.
• If the Repeat Play mode is activated during M.I.X. playback, the
M.I.X. mode will be canceled.
About operations during library creation
• “Tag Search” (page 79) does not work properly while a library is
being created.
• The order in which songs are played during library creation may
differ from the order in the USB memory device.
78-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 79 Thursday, October 4, 2012 5:03 PM
Random Play (M.I.X.)
Operation differs depending on whether the most recent song search
was a Tag Search or a Folder Search.
Touch [
] during playback.
The tracks (files) on the disc will be played back in a random sequence.
To cancel M.I.X. play, touch [ ].
4
M.I.X. Folder*1
(OFF)
(OFF)
M.I.X. Songs*2
*1 Only files in a folder are played back in random sequence.
*2 M.I.X. Songs randomly plays back songs within a selected category
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
• If the M.I.X. mode is activated during Repeat playback, the Repeat
Play mode will be canceled.
• If you select a track by using the search mode, the M.I.X. play mode
will be canceled.
Random Play (M.I.X. ALL)
4
• To return to the previous hierarchy, touch [
].
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
• After selecting a folder via a Folder name search, touch [
] on the
main screen to display the folder search screen.
• After selecting a file via a File name search, touch [
] on the
main screen to display the file search screen.
Tag Search
By using file tag information and keeping these songs organized in
playlists, this unit’s search functions will ease song searches in large
libraries.
Each music category has its own individual hierarchy. Use the Playlists/
Artists/Albums/Songs/Genres/Composers search mode to narrow
searches based on the table below.
Touch [
(Search)] of Bottom banner during
playback.
Touch [Music].
The category name list screen is displayed.
3
Touch [Shuffle All] during playback.
The tracks (files) on the disc will be played back in a
random sequence.
To cancel M.I.X. play, touch [
].
• All songs in the USB memory are played back in random sequence.
Any one song does not play back again until all songs have been
played back.
Touch the desired file name.
The selected file is played back.
The search mode is activated.
2
EN
Touch the desired folder name.
The file name of the selected folder is displayed.
This operation is available only if the most recent song search was a Tag
Search.
1
] of the desired folder.
File Name Search Mode
M.I.X. Folder*1
Tag Search mode:
Touch [
The first file in the selected folder is played back.
5
Folder Search mode:
M.I.X. Songs*2
Folder Name Search Mode
Hierarchy 1
Hierarchy 2
Hierarchy 3
Playlists
Songs
—
Hierarchy 4
—
Artists
Albums
Songs
—
Albums
Songs
—
—
Songs
—
—
—
Genres
Artists
Albums
Songs
Composers
Albums
Songs
—
For example: Searching by Artist name
The following example explains how an ARTISTS search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Searching by artist name
1
2
Touch [
(Search)] of Bottom banner during
playback.
Touch [Music].
The search mode screen appears.
Searching for a Desired Song
3
Touch [Artists].
The Artists search screen is displayed.
INE-W927HD can carry out 2 kinds of searches.
File/Folder Name Search
1
2
Touch [
(Search)] of Bottom banner during
playback.
Select the desired artist.
To Play Back the Artist Directly
1 Touch [ ] of the artist’s name.
All songs of the selected artist are played back.
To Search for the Album of the Artist
Touch [Music].
The search mode is activated.
3
4
Touch [Folders].
The folder name list screen is displayed.
1 Touch the selected artist name.
The Albums search screen of the selected artist is
displayed.
2 Touch [ ] of the desired album’s name.
All songs of the selected album are played back.
79-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 80 Thursday, October 4, 2012 5:03 PM
To Search for a Song in the Album of the Artist
1 Touch the desired artist’s name.
All albums of the selected artist are displayed.
5
Touch the desired album’s name.
All songs of the selected album are displayed.
6
Touch the desired song’s name.
The selected song is played back.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
• After selecting a file via a Tag search, touch [
] on the main
screen to display the search screen. The hierarchy level you selected
last in the search mode is displayed.
Direct Up/Down Function
This operation is available only if the most recent song search was a Tag
Search.
Playlist/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
Touch [ ] or [ ] to select the desired Playlist/Artist/
Album/Genre/Composer.
• If an album is selected from an artist search, the album can be
searched.
• For details on icon display, refer to “Direct Up/Down switch icon:”
(page 83).
• If search selection mode is not activated, Direct Up/Down Function
is not possible.
• During M.I.X. playback, this operation is not possible.
Select the Desired Folder (Folder up/
down)
This operation is available only if the most recent song search was a
Folder/File Search.
If you listen to a file from a selected folder, the folder can be changed.
Touch [
] or [
] to select the folder.
• During M.I.X. ALL playback, this operation is not possible.
80-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 81 Thursday, October 4, 2012 5:03 PM
iPod/iPhone
(Optional)
Display example for iPod/iPhone main screen (Info
mode)
Audio mode
EN
An iPod/iPhone can be connected to this unit by using the cable KCU461iV (sold separately). You can connect a video-capable iPod to enjoy
video as well as music.
When the INE-W927HD is connected by the above cable, the controls
on the iPod are disabled.
• Internet or telephone functions, etc., of the iPhone or iPod touch are
not controllable from the unit, but these functions can be controlled
using the iPhone or iPod touch itself.
• To watch the video screen of the file in the iPod/iPhone, the parking
brake must be engaged.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
FR
Video mode
ES
About iPod/iPhone models usable with this unit
• The following devices have been tested and shown to work
with this unit. Correct function of earlier versions cannot be
guaranteed.
iPod nano 6th generation 8GB/16GB: Ver.1.1
iPod touch 4th generation 8GB/32GB/64GB: Ver.4.3.1
iPod touch 3rd generation 8GB/32GB/64GB: Ver.4.3.1
iPod nano 5th generation(video camera) 8GB/16GB: Ver.1.0.2
iPod classic(Late2009) 160GB: Ver.2.0.4
iPod touch 2nd generation 8GB/16GB/32GB/64GB: Ver.4.2.1
iPod nano 4th generation(video) 8GB/16GB: Ver.1.0.4
iPod touch 1st generation 8GB/16GB/32GB: Ver.3.1.3
iPod nano 3rd generation(video) 4GB/8GB: Ver.1.1.3
iPod classic 80GB/160GB: Ver.1.1.2
iPod classic 120GB: Ver.2.0.1
iPod nano 2nd generation(aluminum) 2GB/4GB/8GB: Ver.1.1.3
iPod 5th generation(video) 60GB/80GB: Ver.1.3
iPod 5th generation(video) 30GB: Ver.1.3
iPod nano 1st generation 1GB/2GB/4GB: Ver.1.3.1
• The following devices have been tested and shown to work
with this unit. Correct function of earlier versions cannot be
guaranteed.
iPhone 4 16GB/32GB: Ver.4.3.1
iPhone 3GS 8GB/16GB/32GB: Ver.4.3.1
iPhone 3G 8GB/16GB: Ver.4.2.1
iPhone 4GB/8GB/16GB: Ver.3.1.3
• For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353.
WARNING
It is dangerous for the driver to watch video while
driving the vehicle. The driver may be distracted from
looking ahead and an accident could occur.
Song title/Episode title*
Artist title/Release Date*
Album title/Podcast title*
Current song no./Total song no.
Remaining time for playing
Artwork display
Elapsed time
: During audio-only playback of a video file in a
Playlist, the Video icon is displayed.
: During audio-only playback of a music file in a
video Playlist, the Music icon is displayed.
* Podcast mode
The iPod/iPhone operation screen display during video
file playback
Touch the screen while the iPod/iPhone playback screen
is displayed.
The iPod/iPhone operation screen is displayed.
• The operation screen changes to the visual screen in the iPod mode
for 5 seconds after an operation has been performed.
Install the INE-W927HD correctly so that the driver
cannot watch Video unless the vehicle is stopped and
the emergency brake is applied.
If the INE-W927HD is not installed correctly, the driver
will be able to watch the Video while driving the
vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
81-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 82 Thursday, October 4, 2012 5:03 PM
3
Playback
1
2
Press the
The Artists search screen is displayed.
4
(SOURCE) button.
1 Touch [ ] of the artist’s name.
All songs of the selected artist are played back.
Touch [
(file).
] or [
] or to select the desired track
To Search for the Album of the Artist
1 Touch the selected artist name.
The Albums search screen of the selected artist is
displayed.
2 Touch [ ] of the desired album’s name.
All songs of the selected album are played back.
Returning to the beginning of the current track (file):
Touch [
].
Fast reverse :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
4
Select the desired artist.
To Play Back the Artist Directly
Touch [iPod (Audio or Video)] of Top banner.
The display shows the iPod mode screen.
3
Touch [Artists].
To Search for a Song in the Album of the Artist
1 Touch the desired artist’s name.
All albums of the selected artist are displayed.
].
To pause playback, touch [
/
5
].
Touch the desired album’s name.
All songs of the selected album are displayed.
6
• If a song is playing on the iPod/iPhone when it is connected to the
INE-W927HD, it will continue playing after the connection.
• An episode may have several chapters. The chapter can be changed
by touching [
] or [
].
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
INE-W927HD. Therefore, a maximum of 64 characters is
recommended. The maximum number of characters for the unit is 64.
• Some characters may not be correctly displayed.
• Touching [ ] of “ALL” will play back all songs in the list.
• Touching “ALL” will display the search list in the next hierarchy.
• An alphabet skip function is available. Refer to “Alphabet Skip
Function” (page 83).
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
Searching for a Music File
Searching for a Desired Video File
An iPod/iPhone can contain thousands of songs. For this reason, this
unit can make various searches using the search function as shown
below.
Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/
Song search mode’s individual hierarchy, you can narrow down your
search as shown in the table below.
You can select a movie, music video, etc., from the list screen.
The selected song is played back.
• Video search mode depends on the iPod/iPhone. If the specification
of the iPod/iPhone is changed, the search mode on this unit will also
be changed.
Examples for the video search mode
• Video Playlists
• Movies
• Music Videos, etc.
<MUSIC Search Menu>
Hierarchy 1
Hierarchy 2
Hierarchy 3
Playlists
Songs
—
—
Artists
Albums
Songs
—
Albums
Songs
—
—
Hierarchy 4
—
Songs
—
—
Podcasts
Episodes
—
—
Genres
Artists
Albums
Songs
Composers
Albums
Songs
—
Audiobooks
—
—
—
Touch the desired song’s name.
For example: Searching by Movie
The following example explains how a Movie search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
2
Touch [
(Search)] of Bottom banner during
playback.
Touch [Video].
The Video search mode screen appears.
For example: Searching by Artist name
The following example explains how an ARTISTS search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Searching by artist name
1
2
Touch [
(Search)] of Bottom banner during
playback.
3
Touch [Movies].
The Movies search screen is displayed.
4
Touch the desired movie.
The selected movie is played back.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 26).
Touch [Music].
The search mode screen appears.
82-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 83 Thursday, October 4, 2012 5:03 PM
Alphabet Skip Function
Search Position Memory
The unit is provided with a alphabet skip function for effective
searching. When you use this function in the search mode, you can
quickly search an artist or a song, etc.
During iPod/iPhone playback, you can quickly move back up the
selected hierarchy, a level at time.
Touch [
]. (ex. [
Playlists])
The hierarchy level you selected last in the search mode is
displayed. Repeated touches return to each previous level up to
the highest.
Repeat Play
Touch [
EN
FR
] to repeatedly play back the currently track.
The tracks (files) will be played repeatedly.
Touch [ ] again to deactivate Repeat play.
Alphabet skip function:
The alphabet skip function is skipped to the next alphabet
such as from A to B, B to C by touching [ALPHABET
].
You can also skip in reverse order such as from B to A by
touching [ ALPHABET].
Direct Up/Down Function
If you touch [ ] of the album name in the search mode, this album will
be played back repeatedly. To go to the previous or next Album, use the
Direct Up/Down Function.
Repeat
(OFF)
Repeat
ES
Random Play (Shuffle)
Touch [
] during playback.
The files will be played back in a random sequence.
The Shuffle mode switches every time [ ] is touched.
Shuffle Songs
Touch [ ] or [ ] to select the desired Playlist/Artist/
Album/Genre/Podcast/Composer.
Shuffle Albums
(OFF)
Shuffle Songs
Shuffle Albums: The songs on each album are played back
in proper order. Upon completing of all the
songs on the album, the next album is
selected randomly. This continues until all
albums have been played.
Shuffle Songs: Song shuffle randomly plays back songs
within a selected category (playlist, album,
etc.). The songs within the category are
played just once until all songs have been
played.
• For details on the search mode, refer to “Searching for a Music File”
(page 82).
Direct Up/Down switch icon
Direct Up/Down switch icon:
Playlist
Artist
Album
Podcast
Genre
Composer
• You can use the Direct Up/Down Function during video file
playback. The Direct Up/Down Function switches in the video mode
are [ ] [ ].
• If you are searching for a song, this operation cannot be performed.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle playback, this operation is not possible.
Random Play (Shuffle All)
All files in the iPod are played back in random sequence.
1
2
Touch [
(Search)] of Bottom banner during
playback.
Touch [Music].
The search mode screen appears.
3
Touch [Shuffle All] of Bottom banner during
playback.
The indicator “
” lights, and the songs will be played back in
random sequence.
• To cancel, set the Shuffle mode to Off. Refer to “Random Play
(Shuffle)” (page 83).
83-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 84 Thursday, October 4, 2012 5:03 PM
Pandora® internet
radio (optional)
Pandora® internet radio is your own FREE personalized radio now
available to stream music on your iPhone and smartphone (which runs
Android OS or BlackBerry OS).
Just start with the name of one of your favorite artists, songs or classical
composers and Pandora® will create a “station” that plays their music
and more music like it.
The INE-W927HD enables you to interact with your Pandora® account
by connecting an iPhone and smartphone that has the latest version of
the Pandora® application installed.
Display example for iPhone Pandora Radio screen
Listening to Pandora®
iPhone Pandora®
1
2
3
Launch the Pandora Application on the iPhone.
Press the
(SOURCE) button.
Touch [PANDORA®] of Top banner.
The display changes to PANDORA mode screen.
4
To skip to the next song, touch [
].
• The operation to replay a previous song is not available.
• Pandora limits the number of skips allowed on their service. If you
attempt to skip songs beyond the limit, “No skips remaining” is
displayed.
• INE-W927HD remembers the source just before turning off the
power.
Even if you reconnect an iPhone without launching Pandora
Application while the power is off, Pandora mode (not iPod mode) is
displayed when power is turned back on.
• Depending on the signal status, song may be stopped during
playback.
When the advertisement is received, the playback time will be frozen
and key operation is invalid.
• The playback time may not be correctly displayed.
BLUETOOTH Pandora®
Display example for BLUETOOTH Pandora Radio
screen
Touch [<<], [>>]
Station name
Song Name
Artist Name
Album Name
Track/Artist bookmark icon
Elapsed time
Remaining time for playing
Artwork display
When using BLUETOOTH Pandora®, it is necessary to register the
connected BLUETOOTH compatible smartphone (which runs Android
OS or BlackBerry OS) as BLUETOOTH Audio. For details, refer to
“Registering the BLUETOOTH Device” (page 55).
Also, make sure the BLUETOOTH Pandora® setting is set to “On”
(page 54).
1
2
3
4
Pair the smartphone with this unit.
Launch the Pandora® on the smartphone.
Press the
(SOURCE) button.
Touch [PANDORA®(BLUETOOTH)] of Top banner.
The display changes to BLUETOOTH Pandora mode
screen. The playback screen appears.
5
To skip to the next song, touch [
].
• If pairing is not registered for the Bluetooth audio device, the
message “No BLUETOOTH device connected. Please check
“BLUETOOTH settings.” appears on the screen. Change the audio
device settings as per “Registering the BLUETOOTH Device”
(page 55).
• The operation to replay a previous song is not available.
• Pandora® limits the number of skips allowed on their service. If you
attempt to skip songs beyond the limit, “No skips remaining.” is
displayed.
• INE-W927HD remembers the source just before turning off the
power. If Pandora® is the last SOURCE to be played, it will appear
as the SOURCE the next time the unit is power up even if the app is
not launched on your smartphone.
• The display content varies when ads are received.
• The playback time may not be correctly displayed.
84-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 85 Thursday, October 4, 2012 5:03 PM
“Thumbs” Feedback
Creating a New Station
You can personalize your stations with “Thumbs Up” or “Thumbs
Down” feedback, which the system takes into account for future music
selections.
Basing on the currently playing song or artist, a personalized Pandora
station can be created. The new station will play more music like it.
During playback, touch [ ] for thumbs up, or touch [ ]
for thumbs down.
:The “ ” indicator appears in the display. Pandora® will add
similar music to your station.
:The “ ” indicator is displayed. Pandora® will ban that song
from your station, and the current song is skipped. If the number
of skips allowed has reached its limit, the current song continues
to play back.
EN
Freeword
1
During playback, touch [Create New Station].
The Key Pad screen is displayed. You can enter a keyword
and search for Artist/Song.
2
FR
Enter a keyword and touch [OK].
Artist/Track
• In some situations, “Thumbs” feedback may not be available.
“Unable to save your thumb rating.” will be displayed.
During playback, touch [Create Station From (Artist/
Track)] of Bottom banner.
Searching for a Desired Station
• The created station is saved to your station list.
• You can also create stations using the Pandora Application on your
iPhone or on the web at www.pandora.com.
• In some situations, creating a new station may not be available.
“Unable to create station.” will be displayed.
You can display your station list and select stations directly from the
INE-W927HD.
Alphabet Search
1
2
Touch [
(Search)] of Bottom banner to activate
the Search mode.
Touch [By A-Z].
The “By A-Z” search mode is activated and the station
names are listed alphabetically.
3
Touch the desired station.
Pandora will play that station.
QuickMix
Use QuickMix to create a playlist based on two or more of your Pandora
stations. Edit your QuickMix station selections on the Pandora
Compatible Application for iPhone when it is not connected to the INEW927HD.
1
2
2
Touch [By A-Z] or [By Date].
The “By A-Z” or “By Date” search mode is activated and the
station name is displayed.
Search by Date Added
1
Touch [
(Search)] of Bottom banner to activate
the Search mode.
Touch [
(Search)] of Bottom banner to activate
the Search mode.
3
Touch [By Date].
• The
indicator lights, and the songs from the created stations are
played back in random sequence.
Touch [Quick Mix].
The “By Date” search mode is activated and the station
names are listed by the date they were added to the
account.
3
Touch the desired station.
Pandora will play that station.
85-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 86 Thursday, October 4, 2012 5:03 PM
Bookmarking a Desired Track or Artist
The currently playing song or artist can be bookmarked and saved to
your Pandora account.
1
During playback, touch [Artwork display].
The type selection telop is displayed.
Artwork display
2
Touch [Track] or [Artist].
The current track or artist is bookmarked. “
“
” icon is displayed.
” icon or
• Your bookmarks can be viewed on your “Profile” page at
www.pandora.com.
• In some situations, bookmarks may not be available. “Unable to save
your bookmark.” will be displayed.
86-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 87 Thursday, October 4, 2012 5:03 PM
Multi story function*
Information
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
Product Software Update
This product use software that can be updated through a USB memory
device. Download the software from the Alpine website and update the
product using the USB memory device.
EN
* These functions differ from disc to disc. For details, refer to the disc’s
instructions.
FR
Updating this product
Check the Alpine website for details on updating.
http://www.alpine-europe.com
About DVDs
ES
Music CDs and DVDs have grooves (tracks) in which the digital data is
recorded. The data is represented as microscopic pits recorded into the
track – these pits are read by a laser beam to play the disc. On DVDs,
the density of the tracks and pits is twice that of CDs, so DVDs can
contain more data in less space.
CDs
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
Minimum pit
length 0.9 µm
0.6 mm
0.6 mm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of music. In
addition, DVDs provide sharp picture quality with vivid colors thanks to
a horizontal resolution of over 500 lines (compared to less than 300 for
VHS tape).
In addition, DVDs offer a variety of functions.
Multiple audio* (page 37)
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
Subtitles function* (page 37)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 37)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
87-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 88 Thursday, October 4, 2012 5:03 PM
List of Language Codes
(For details, see page 50.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Ger man
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JP
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Bur mese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Por tuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
88-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 89 Thursday, October 4, 2012 5:03 PM
List of Country Codes
(For details, see page 50.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Abbreviation
Country
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Abbreviation
KI
Dominica
KM
Dominican Republic
KN
Algeria
KP
Ecuador
Estonia
KR
Egypt
KW
Western Sahara
KY
Eritrea
KZ
Spain
LA
Ethiopia
Finland
LB
Fiji
LC
Falkland Islands
Micronesia, Federated States of
LI
Faroe Islands
LK
France
LR
Gabon
LS
United Kingdom
LT
Grenada
LU
Georgia
LV
French Guiana
LY
Ghana
MA
Gibraltar
MC
Greenland
MD
Gambia
MG
Guinea
MH
Guadeloupe
MK
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
Code
7573
7577
7578
7580
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
89-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 90 Thursday, October 4, 2012 5:03 PM
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
90-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 91 Thursday, October 4, 2012 5:03 PM
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items in
the following checklist. This guide will help you isolate the problem
if the unit is at fault. Otherwise, make sure the rest of your system is
properly connected, or then consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness/Contrast control is set at the minimum position.
- Adjust the Brightness/Contrast control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD are not securely made.
- Check the connections and firmly connect.
• The Parking Brake Lead is not connected.
• The Parking Brake is not engaged.
- Connect the Parking Brake Lead, then engage the Parking
Brake. (See page 101)
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
The optional remote control is inoperative.
• The remote control sensor setting of “Remote Sensor Setting”
(page 40) is not set to this unit (“Front”).
- Set for “Front.”
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
Disc
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in this unit.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Insert the disc correctly. (See page 19)
Unable to fast forward or backward the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; a damaged disc should be replaced.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW playback
not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
Error displays.
• Mechanical error.
- Touch [ Disc] on the Open/Tilt screen. After the error
indication disappears, insert the disc again. If the abovementioned solution does not solve the problem, consult your
nearest Alpine dealer.
MP3/WMA/AAC is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA/AAC” (pages 31 to 32), then
rewrite in the format supported by this device.
91-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
01GB00INE-W927HD.book Page 92 Thursday, October 4, 2012 5:03 PM
Unit does not operate.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to play back with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
If this Message Appears
Various messages are displayed on the screen during operation. In
addition to the messages telling you the current status or providing
guidance for the next operation, there are also the following error
messages. If one of these error messages is displayed, carefully follow
the instructions in the solution column.
System
If you are driving, please pull over before using this
function.
• A setup operation, etc., was carried out while the vehicle was
running.
- Move the vehicle to a safe location, stop, and engage the
parking brake, then carry out this operation.
USB current error.
• Abnormal current is run to the USB connector device.
- Turn the ignition key off, and then set to ON again.
- Attempt to connect another iPod/iPhone/USB memory device.
Audio/Visual
Read error.
Please check the Disc.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Touch [ Disc] on the Open/Tilt screen.
- Change the disc.
USB device error.
• An iPod/iPhone that is not supported by the unit is connected.
- Connect an iPod/iPhone that is supported by the unit.
- Reset the iPod.
• A USB device that is not supported by the unit is connected.
- Attempt to connect another USB memory device.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod/iPhone
and the unit, using the iPod/iPhone cable.
- Check the display by reconnecting between the USB memory
device and the unit.
• Caused by the iPod/iPhone Software Version not being
compatible with this unit.
- Update the iPod/iPhone Software Version to be compatible
with this unit.
• The iPod/iPhone is not verified.
- Change another iPod/iPhone.
Region Code Violation.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
No data.
• There are no data in the iPod/iPhone.
- Download data to the iPod/iPhone and connect to the INEW927HD.
• There are no data in the USB memory.
- Download data to the USB memory and connect to this unit.
Un-readable song was skipped.
• A copy-protected WMA file has been detected.
- You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate supported by the unit.
BLUETOOTH
Unable to access the DVD drive.
The system will reset.
• An access error to DVD drive occurred for some reasons.
- The unit is rebooted automatically.
Please check BLUETOOTH audio device.
• The BLUETOOTH audio device was not connected correctly.
- Check the settings for INE-W927HD and the BLUETOOTH
audio device and reconnect.
Unable to access the DVD drive.
Please inquire details from the service center.
• An access error to DVD drive occurred for some reasons.
- Please ask Service Center for help.
Please check mobile device.
• The mobile phone was not connected correctly.
- Check the settings for INE-W927HD and the mobile phone
and reconnect.
92-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 93 Thursday, October 4, 2012 5:03 PM
Unable to download phonebook.
• Phonebook failed to read due to mobile phone disconnection,
etc.
- Check the mobile phone connection, and then conduct
synchronizing and adding again. (See page 63)
• The connected mobile phone does not support synchronizing of
its phone book.
- Connect the mobile phone that supports synchronizing the
phone book, then synchronize again. (See page 63)
Video frame rate not supported.
• The file being played is a DivX® file with an unsupported frame
rate.
- Play a DivX® file with a supported frame rate.
Video resolution not supported.
• The file being played is a DivX® file with an unsupported
resolution.
- Play a DivX® file with a supported resolution.
EN
Navigation
SiriusXM
The vehicle’s position is erroneous.
• The GPS reception is poor.
- Drive the vehicle in an area of good GPS reception to allow the
unit to recalibrate itself. Move to a location where strong GPS
reception is possible.
No operation
• Moisture condensation
- Allow enough time for the condensation to evaporate (about 1
hour).
• Ambient Temperature
- Make sure the temperature inside the vehicle is between 0°C
and 45°C (32°F and 113°F).
Check Tuner
• The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
- Connect the Tuner or check the Tuner connection to the back
of the unit.
FR
Playing back a DRM protected DivX File
Some operations cannot be performed while displaying the following
message.
Authorization Error.
This player is not authorized to play this video.
• The version of the DRM protected DivX® File is not supported
by this unit.
- Play the supported DivX® File.
Rental Expired.
• The file being attempted to play has a limited number of
viewings. The viewing limit has been reached and can no longer
be played on this device. After the message has been displayed,
the beginning of the next file will automatically be played back.
This DivX rental has used XX out of YY views.
Continue?
• If the total number of viewings for this file has not been
exceeded, the views remaining is displayed.
- To play back, select [OK]. If the next file is to be played back,
select [Cancel].
Do you wish to stop playing rental file?
• While playing back a rental file, “Do you wish to stop playing
rental file?” is displayed when the following operations are
performed. Selecting [OK], reduces the number of views by 1.
• Folder Up/Down
• STOP
• Search operation
• Move to the first/last DivX® file by Chapter Up/Down
- To interrupt the playback, touch [OK], or touch [Cancel] to
not interrupt.
Audio format not supported.
• The file being played is a DivX® file with an unsupported audio
format, so only the video data is played.
- Play a DivX® file with a supported audio format.
Check Antenna
• The SiriusXM Satellite Radio antenna or cable is either damaged
or not connected correctly to the SiriusXM Tuner.
- Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked
or otherwise damaged. Replace the antenna if necessary.
No Signal
• The SiriusXM satellite signal is too weak at the current location.
- Move the vehicle to a location with a clear view of the southern
sky.
- Make sure the Satellite Radio antenna is properly mounted and
not obstructed by metal objects.
Channel Not Subscribed Call SiriusXM to Subscribe
• The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
- Visit www.siriusxm.com for information on subscribing to this
channel.
• The unit will revert to the previous selected channel or to channel 1
automatically.
Channel Not Available
• The active channel is no longer in the SiriusXM channel lineup
or the user has entered an invalid channel number.
- Visit www.siriusxm.com for information on the current
channel lineup.
• The unit will revert to the previous channel or to channel 1
automatically.
Subscription Updated Press Any key to Continue
• Your subscription has been updated.
- Press any button to clear this message.
Channel Locked
• A locked channel is selected.
- Input the passcode on the number keypad screen, refer to
“Parental Lock Function” (page 77). If wrong passcode is
input, “Incorrect Lock Code” will be displayed and the unit
will revert to the previous channel.
93-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 94 Thursday, October 4, 2012 5:03 PM
PICKUP
Specifications
Wave length
MONITOR SECTION
Laser power
Screen Size
7.0"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 1,152,000 pcs. (800 × 3 × 480)
Effective Number of Picture Elements
99% or more
Illumination System
LED
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
DVD: 666 nm
CD: 785 nm
CLASS II
87.5 – 108.0 MHz
8.1 dBf (0.7 µV/75 ohms)
12 dBf (1.1 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
GPS SECTION
GPS Reception frequency
GPS Reception sensitivity
1575.42 ±1 MHz
-130 dB max.
BLUETOOTH SECTION
BLUETOOTH Specification Bluetooth V2.1+EDR
Output Power
+4 dBm Max. (Power class 2)
Profile
HFP (Hands-Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GENERAL
AM TUNER SECTION
Tuning Range
Usable Sensitivity
Power Requirement
530 – 1,710 kHz
22.5 µV/27 dBf
USB SECTION
USB requirements
Max. Power Consumption
USB Class
USB 1.1/2.0
1,000 mA
USB (Play From Device)/
USB (Mass Storage Class)
File System
FAT12/16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
WMA Decoding
Windows Media™ Audio
AAC Decoding
AAC-LC format “.m4a” file
Number of Channels
2-Channel (Stereo)
Frequency Response*
5-20,000 Hz (±1 dB)
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
100 dB
Channel Separation
85 dB (at 1 kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
100 dB
Operating temperature
Output Voltage
Weight
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
AUX OUT:
14.4 V DC
(11–16 V allowable)
-4°F to +140°F
(-20°C to + 60°C)
4,000 mV/10k ohms
2.58 kg (5 lbs. 11 oz)
4V/10 kohms (max.)
4V/10 kohms (max.)
1.2V/10 kohms
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
100 mm (3-7/8")
164.4 mm (6-1/2")
NOSE SIZE
Width
Height
Depth
171 mm (6-3/4")
96 mm (3-3/4")
20 mm (3/4")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
CAUTION
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
94-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 95 Thursday, October 4, 2012 5:03 PM
END USER LICENSE AGREEMENT
(Microsoft)
You have acquired a device (“DEVICE”) that includes software
licensed by Alpine Electronics, Inc. (collectively “ALPINE”) from
an affiliate of Microsoft Corporation (collectively “MS”). Those
installed software products of MS origin, as well as associated
media, printed materials, and “online” or electronic
documentation (“SOFTWARE”) are protected by international
intellectual property laws and treaties. The SOFTWARE is
licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE
AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY
THE SOFTWARE INSTEAD, PROMPTLY CONTACT ALPINE FOR
INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR
A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT
NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE
YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE,
This EULA grants you the following license: You may use the
SOFTWARE only on the DEVICE.
NOT FAULT TOLERANT.
THE SOFTWARE IS NOT FAULT TOLERANT. ALPINE HAS
INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE
IN THE DEVICE, AND MS HAS RELIED UPON ALPINE TO
CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE
SOFTWARE IS SUITABLE FOR SUCH USE.
NO WARRANTIES FOR THE SOFTWARE,
THE SOFTWARE is provided “AS IS“ and with all faults. THE
ENTIRE RISK AS TO SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING
LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE OR AGAINST
INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR SOFTWARE THOSE
WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT
BINDING ON, MS.
NO LIABILITY FOR CERTAIN DAMAGES.
EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO
LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL
OR THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO
EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS
OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S. $250.00).
EN
LIMITATIONS ON REVERSE ENGINEERING,
DECOMPILATION, AND DISASSEMBLY
You may not reverse engineer, decompile, or disassemble the
SOFTWARE, except and only to the extent that such activity is
expressly permitted by applicable law notwithstanding this
limitation.
FR
ADDITIONAL SOFTWARE/SERVICES.
The SOFTWARE may permit ALPINE, MS, Microsoft Corporation
or their affiliates to provide or make available to you SOFTWARE
updates, supplements, add-on components, or Internet – base
service components of the SOFTWARE after the date you obtain
your initial copy of the SOFTWARE (“Supplemental
Components”).
• If ALPINE provides or makes available to you
Supplemental Components and no other EULA terms are
provided along with the Supplemental Components, then
the terms of this EULA shall apply.
• If MS, Microsoft Corporation or their affiliates make
available Supplemental Components, and no other EULA
terms are provided, then the terms of this EULA shall
apply, except that MS, Microsoft Corporation or affiliate
entity providing the Supplemental Component(s) shall be
licensor of the Supplemental Component(s).
• ALPINE, MS, Microsoft Corporation and their affiliates
reserve the right to discontinue any Internet-based
services provided to you or made available to you through
the use of the SOFTWARE.
RECOVERY MEDIA.
If SOFTWARE is provided by ALPINE on separate media and
labeled “Recovery Media” you may use the Recovery Media
solely to restore or reinstall the SOFTWARE originally installed on
the DEVICE.
UPGRADES.
If the SOFTWARE is provided by ALPINE separate from the
DEVICE on separate media or via web download or other
means, and is labeled “For Upgrade Purposes Only” you may
install one (1) copy of such SOFTWARE onto the DEVICE as a
replacement copy for the existing SOFTWARE, and use it in
accordance with this EULA, including any additional EULA terms
accompanying the upgrade SOFTWARE.
TERMINATION.
Without prejudice to any other rights, ALPINE or MS may
terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all
copies of the SOFTWARE and all of its component parts.
95-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 96 Thursday, October 4, 2012 5:03 PM
INTELLECTUAL PROPERTY RIGHTS.
All title and intellectual property rights in and to the SOFTWARE
(including but not limited to any images, photographs,
animations, video, audio, music, text and “applets,”
incorporated into the SOFTWARE), the accompanying printed
materials, and any copies of the SOFTWARE, are owned by MS,
Microsoft Corporation, their affiliates or suppliers. The
SOFTWARE is licensed, not sold.
You may not copy the printed materials accompanying the
SOFTWARE. All title and intellectual property rights in and to the
content which may be accessed through use of the SOFTWARE
is the property of the respective content owner and may be
protected by applicable copyright or other intellectual property
laws and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA are
reserved by MS, Microsoft Corporation, their affiliates and
suppliers. Use of any on-line services which may be accessed
through the SOFTWARE may be governed by the respective
terms of use relating to such services. If this SOFTWARE
contains documentation that is provided only in electronic form,
you may print one copy of such electronic documentation.
TRADEMARKS.
This EULA does not grant you any rights in connection with any
trademarks or service marks of ALPINE, MS, Microsoft
Corporation, their affiliates or suppliers.
PRODUCT SUPPORT.
Product support for the SOFTWARE is not provided by MS, its
parent corporation Microsoft Corporation, or their affiliates or
subsidiaries. For product support, please refer to ALPINE
support number provided in the documentation for the DEVICE.
Should you have any questions concerning this EULA, or if you
desire to contact ALPINE for any other reason, please refer to
the address provided in the documentation for the DEVICE.
SOFTWARE TRANSFER ALLOWED BUT WITH
RESTRICTIONS.
You may permanently transfer rights under this EULA only as
part of a permanent sale or transfer of the Device, and only if the
recipient agrees to this EULA. If the SOFTWARE is an upgrade,
any transfer must also include all prior versions of the
SOFTWARE.
EXPORT RESTRICTION.
You acknowledge that SOFTWARE is of US-origin. You agree to
comply with all applicable international and national laws that
apply to the SOFTWARE, including the U.S. Export
Administration Regulations, as well as end-user, end-use and
country destination restrictions issued by U.S. and other
governments. For additional information on exporting the
SOFTWARE, see http://www.microsoft.com/exporting/
END USER LICENSE AGREEMENT
(NAVTEQ)
In using this Navigation System (hereinafter referred to as
“System”), which includes Alpine Electronics, Inc. (“Alpine”)
Specifications, Space Machine, Inc. (“Space Machine”)
Software and NAVTEQ North America, LLC. (“NAVTEQ”)
Database, you are bound by the terms and conditions set forth
below. By breaking the seal on the System and using your copy
of the System, you have demonstrated your agreement to the
terms and conditions of this Agreement. You should, therefore,
make sure that you read and understand the following
provisions.
The System may not be copied, duplicated or otherwise
modified, in whole or in part, without the express written
permission of Alpine, Space Machine and NAVTEQ.
The System may not be transferred or sublicensed to any third
party for profit, rent or loan or licensed for reuse in any manner.
The System may not be decompiled, reverse engineered or
otherwise disassembled, in whole or in part.
The System may not be used in a network or by any other
manner of simultaneous use in multiple systems.
The System is intended solely for personal use (or internal use
where the end-user is a business) by the consumer.
The System is not to be used for commercial purposes.
Neither Alpine, Space Machine nor NAVTEQ guarantees to the
customer that the System meet the specific objectives of the
user.
Neither Alpine, Space Machine nor NAVTEQ shall be
responsible for any damages caused by the use of the System to
the actual user and to any third party.
The warranty on the System shall not extend to an exchange or
refund due to misspelling, omission of letters, or any other
cosmetic discrepancy in layout found in the System.
The right to use the System shall expire either when the user
destroys this software, or when any of the terms for use is
violated and Alpine, Space Machine and/or NAVTEQ exercise
the option to revoke the license to use this software.
The terms and conditions hereof apply to all subsequent users
and owner’s as well as to the original purchaser.
The NAVTEQ Database may include or reflect data of licensors,
including Her Majesty The Queen in right of CANADA. Such data
is licensed on an “AS IS” basis. The licensors, including Her
Majesty The Queen, make no guarantees, representations or
warranties respecting such data, either express or implied,
arising by law or otherwise, accuracy or fitness for a particular
purpose.
The licensors, including Her Majesty The Queen, shall not be
liable in respect of any claim, demand or action, irrespective of
the nature of the cause of the claim, demand or action alleging
any loss, injury or damages, direct or indirect, which may result
from the use or possession of the data or the NAVTEQ database.
The licensors, including Her Majesty The Queen, shall not be
liable in any way for loss of revenues or contracts, or any other
consequential loss of any kind resulting from any defect in the
data or the NAVTEQ database.
End User shall indemnify and save harmless the licensors,
including Her Majesty The Queen and the minister, and their
officers, employees and agents from and against any claim,
demand or action, irrespective of the nature of the cause of the
claim, demand or action, alleging loss, costs, expenses,
damages or injuries (including injuries resulting in death) arising
out of the use or possession of the data or the NAVTEQ
database.
96-EN
01GB06INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 97 Thursday, October 4, 2012 5:03 PM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 8 to 13 of this manual thoroughly for
proper use.
EN
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your INE-W927HD. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the INE-W927HD to the fuse box, make
sure the fuse for the intended circuit of the INE-W927HD has
the appropriate amperage. Failure to do so may result in damage
to the unit and/or the vehicle. When in doubt, consult your
Alpine dealer.
• The INE-W927HD uses female RCA-type jacks for connection
to other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
• The Display must be completely retracted in the casing when
installing. If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/
close without coming in contact with the gear shift.
97-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
FR
ES
01GB00INE-W927HD.book Page 98 Thursday, October 4, 2012 5:03 PM
3
Installation
Mounting the GPS Antenna inside the vehicle.
1 Clean the mounting location.
2 Put on the GPS Antenna mounting plate.
3 Mount the GPS Antenna.
Caution
Do not block the unit’s fan or heat sink, thus preventing
air circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
<example>
Air ventilation hole
Heat sink
Rear of the Unit
Caution concerning the installation location
1
GPS Antenna
Antenna mounting plate
• Mount the GPS Antenna on a flat plane of the dash board or
rear tray.
• Some thermal reflection type or thermal absorption type glass
may interrupt high frequency waves. If reception is poor with
the antenna installed inside the car, try to mount the antenna
outside the car.
• Make sure the GPS Antenna is not covered (obstructed) by any
metallic surface or object.
Before installing, make sure that the opening and
closing of the display will not interfere with
operation of the gear shift.
Movable Display
2
Angle of installation
Install at an angle between horizontal and 30°. Note
that installing at an angle outside of this range will
result in a loss of performance and possibly
damage.
0 -30°
98-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 99 Thursday, October 4, 2012 5:03 PM
4
6
Mounting the Microphone.
For safe use, make sure of the following:
• location is stable and firm.
• driver’s view and operations are not obstructed.
• microphone is located where the driver’s voice can be easily
picked up (on the sun visor, etc.).
When you speak into the microphone, you should not have
to change your driving posture. This may cause a
distraction, taking your attention away from safely driving
your vehicle. Carefully consider direction and distance while
mounting the microphone. Confirm that the driver’s voice
can be easily picked up at the selected location.
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis. Connect all the
leads of the INE-W927HD according to details
described in the CONNECTION section.
Screw
Hex Nut (M5)
*2
Metal
Mounting
Strap
Microphone
FR
Bolt Stud
*1
ES
Cable clamp
(Sold separately)
Ground Lead
This unit
Chassis
• For the screw marked “*2,” use an appropriate screw for the chosen
mounting location.
5
Remove the mounting sleeve from the main unit (see
“Removal” on page 99).
Slide the unit into the mounting sleeve and secure it.
Mounting Sleeve
(Included)
EN
Dashboard
This unit
7
Slide the INE-W927HD into the dashboard until it
clicks. This ensures that the unit is properly locked
and will not accidentally come out from the
dashboard.
Removal
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This unit
Pressure
Bracket keys
(Included)
Plates*1
Face Plate*2 (Included)
2. Pull the unit out, keeping it unlocked as you do so.
*1 If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
*2 The supplied face plate may be mounted.
99-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 100 Thursday, October 4, 2012 5:03 PM
Connection Diagram of SPST Switch (sold separately)
(If the ACC power supply is not available)
ACC
(Red)
SPST SW (Optional)
INE-W927HD
FUSE (5A)
(Optional)
BATTERY
FUSE (20A)
(Optional)
(Yellow)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when INE-W927HD is used individually.
• If the switched power (ignition) lead of the INE-W927HD is connected directly to the positive (+) post of the vehicle’s battery, the INE-W927HD
draws some current (several hundred milliamperes) even when its switch is placed in the OFF position, and the battery may be discharged.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
100-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 101 Thursday, October 4, 2012 5:03 PM
Connections
EN
Antenna
REMOTE OUT
(Brown)
To remote input lead
REMOTE IN
(Brown)
(Green/White)
To remote output lead
SPEED SENSOR
CAMERA1
To the vehicle speed pause line
CAMERA2
To Rear/Other camera
CAMERA SW
TOPVIEW Camera Switch connector*1
To steering remote control interface
box
Microphone (Included)
(Yellow)
(Red)
(White)
(Yellow)
(Red)
(White)
To Video Output terminal
To Audio Output terminals
(R, L)
To Video Input terminal
To Audio Input terminals
(R, L)
Rear Left
Amplifier
Rear Right
Front Left
Amplifier
Front Right
Subwoofers
Amplifier
REMOTE TURN-ON
To amplifier or equalizer
(Blue/White)
To plus side of the back
lamp signal lead of the car
REVERSE
(Orange/White)
POWER ANT
(Blue)
To power antenna
To the parking brake
signal lead
PARKING BRAKE
(Yellow/Blue)
FOOT BRAKE
To the foot brake cord or
brake lamp cord
(Yellow/Black)
IGNITION
(Red)
Ignition key
BATTERY
(Yellow)
GND
(Black)
Battery
(Green)
*1
FR
To Front/Rear camera
(Green/Black)
(White)
Rear left
(White/Black)
(Gray/Black)
Front left
(Gray)
(Violet/Black)
Front right
(Violet)
Rear right
Speakers
Currently, TOPVIEW is not being used.
101-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
ES
01GB00INE-W927HD.book Page 102 Thursday, October 4, 2012 5:03 PM
Radio Antenna Receptacle
Reverse Lead (Orange/White)
Remote Control Output Lead (Brown)
Connect to the plus side of the car’s reverse lamp. This
lamp illuminates when the transmission is shifted into
reverse (R).
With this lead properly wired, the video picture
automatically switches to the rear camera whenever the car
is put into reverse (R).
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (Brown)
Connect the external Alpine product to the remote control
output lead.
Speed Sensor Lead (Green/White)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
Direct CAMERA Input Connector
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Parking Brake Lead (Yellow/Blue)
CAMERA Input RCA Connector (Yellow)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INE-W927HD.
Use when connecting a camera with RCA Output
Connector.
Foot Brake Lead (Yellow/Black)
Use when the optional direct camera is connected.
Camera Switch Lead
Steering Remote Control Interface Connector
Connect to the vehicle’s foot brake lead or brake lamp lead.
Switched Power Lead (Ignition) (Red)
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Video Input Connector (AUX INPUT) (Yellow)
Battery Lead (Yellow)
Input the video.
Audio Input Connectors (AUX INPUT)
Connect this lead to the positive (+) post of the vehicle’s
battery.
RED is right and WHITE is left input the audio.
Fuse Holder (15A)
Video Output Connector (AUX OUTPUT) (Yellow)
Ground Lead (Black)
Output the video.
RED is right and WHITE is left output the audio.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Rear Output RCA Connectors
Left Rear (+) Speaker Output Lead (Green)
It can be used as Rear Output RCA Connectors. RED is
right and WHITE is left.
Left Rear (–) Speaker Output Lead (Green/Black)
Audio Output Connectors (AUX OUTPUT)
Front Output RCA Connectors
It can be used as Front Output RCA Connectors. RED is
right and WHITE is left.
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Right Front (–) Speaker Output Lead (Gray/Black)
Subwoofer RCA Connectors
Right Front (+) Speaker Output Lead (Gray)
RED is right and WHITE is left.
Right Rear (–) Speaker Output Lead (Violet/Black)
RCA Extension Cable (sold separately)
Right Rear (+) Speaker Output Lead (Violet)
GPS antenna Receptacle
CAMERA/W. REMOTE Connector
Connect to separately sold GPS antenna (included).
iPod VIDEO Input Connector
Input the iPod/ iPhone video signal or AUX video/audio
signal.
• Set “AUX3 In Sel.” (page 54) to “iPod Video” when an
iPod/iPhone is connected.
• Set “AUX3 In Sel.” (page 54) to “AUX3” when AUX video/
audio is input.
SiriusXM Tuner Input Connector
AUX/PRE OUT Connector
Vehicle Display Interface Connector
Not used
MIC Input Connector
To Microphone (Included).
USB Connector
To USB Memory or iPod/iPhone.
Power Supply Connector
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
102-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 103 Thursday, October 4, 2012 5:03 PM
System Example
Connection of a USB Memory
EN
GPS Antenna (included)
FR
ES
USB connector
USB extension cable
(Included)
USB Memory (Sold separately)
• Do not leave USB memory, in a vehicle for a long time. Heat and humidity may damage the USB memory.
Connection of an iPod/iPhone
iPod/iPhone
(Sold separately)
iPod VIDEO input
connector
USB connector
iPod VIDEO AV extension cable*1
(Included)
iPod/iPhone connection cable
(Included)
USB extension cable (Included)
*1 If iPod VIDEO is supported, use the iPod VIDEO extension cable.
• Do not leave a iPod/iPhone in a vehicle for a long time. Heat and humidity may damage the iPod/iPhone and you may not be able to play it again.
103-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 104 Thursday, October 4, 2012 5:03 PM
Connection of an External device
To Video Output terminal
DVD Player
(sold separately)
To Audio Output terminal
DVE-5207, etc.
CAMERA/W. REMOTE Connector
iPod VIDEO input connector
AUX/PRE OUT Connector
To Video Output terminal
AUX/PRE OUT cable
(Yellow)
(Red)
DVD Changer (Sold separately)
(White)
To Audio Output terminal
To Video Input terminal
(Yellow)
(Red)
Rear monitor (Sold separately)
(White)
To Audio Input terminal
REMOTE IN
(Brown)
REMOTE OUT
REMOTE OUT
REMOTE IN
(Brown)
(White/Brown)
(White/Brown)
Camera cable
1 Video/Audio Input Connectors (AUX INPUT)
2 Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
3 RCA Extension Cable (Sold Separately)
4 Remote Control Input Lead (Brown)
Connect this lead to the remote control output lead. This
lead inputs the controlling signals from the remote control.
5 Remote Control Output Lead (Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
6 AV/RCA interface cable (4-pole mini AV plug to 3RCA) (sold separately)
7 Video/Audio Input Connectors
YELLOW is for input video, RED is right and WHITE is left
input the audio.
• You can change the name of an external device. Refer to “Setting the AUX Mode” (page 53).
104-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 105 Thursday, October 4, 2012 5:03 PM
Connection of an External Amplifier
Power Supply Connector
EN
AUX/PRE OUT Connector
FR
AUX/PRE OUT cable
ES
Amplifier 4 ch (Sold separately)
(Red)
(White)
Input
Front speaker
Input
Rear speaker
(Red)
(White)
Amplifier for subwoofer (Sold separately)
(Red)
Input
(White)
REMOTE TURN-ON
REMOTE ON
(Blue/White)
(Blue/White)
Subwoofer
REMOTE ON
Power cable
1 Front Output RCA Connectors
RED is right and WHITE is left.
(Blue/White)
3 Subwoofer RCA Connector
4 RCA Extension Cable (Sold separately)
2 Rear Output RCA Connectors
RED is right and WHITE is left.
105-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 106 Thursday, October 4, 2012 5:03 PM
Connection of cameras (Direct camera and AUX camera)
CAMERA/W. REMOTE Connector
CAMERA 1
Direct rearview camera (sold
separately)
HCE-C117D, etc.
To Video Output terminal
CAMERA 2
Camera with RCA video output (sold
separately)
Camera cable
1 Direct CAMERA Input Connector
3 CAMERA Input RCA Connector
2 Camera extension cable (Included with direct
rearview camera)
4 RCA Extension Cable (sold separately)
106-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 107 Thursday, October 4, 2012 5:03 PM
Connection of cameras (HCE-C212F + HCE-C210RD or HCE-C200F + HCE-C200R)
EN
FR
AUX/PRE OUT Connector
AUX/PRE OUT Cable
(Yellow)
ES
Control Unit
(Red)
To Video Output Terminal
(White)
REVERSE
Camera Control Lead
(Orange/White)
(Orange/Black)
To plus side of the back lamp
signal lead of the car.
1 Video/Audio Input Connectors (AUX INPUT)
2 RCA Extension Cable (sold separately)
• When the screen switches from the front view camera image to the Navigation screen, the location of your vehicle may not be displayed correctly.
107-EN
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 108 Thursday, October 4, 2012 5:03 PM
About the Rules of Bluetooth Electromagnetic Radiation Regulation
USA/Canada
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and
operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition dans le
Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée.
Cependant, cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le
dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).
Don’t forget to take a moment to protect your purchase by registering your product now at the following
address: www.alpine-usa.com/registration.
N’oubliez pas de consacrer un moment à la protection de votre achat en enregistrant votre produit dès
maintenant à l’adresse suivante : www.alpine-usa.com/registration.
Recuerde que con solo unos pocos pasos podrá proteger su producto, registrándolo a través de la
siguiente dirección: www.alpine-usa.com/registration.
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
01GB00INE-W927HD.book Page 109 Thursday, October 4, 2012 5:03 PM
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and
are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer
or contact Alpine at one of the telephone numbers listed below.
PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories (“the product”). Products purchased in the Canada
are covered only in the Canada. Products purchased in the
U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product,
who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts
and labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
A Damage occurring during shipment of the product to Alpine
for repair (claims must be presented to the carrier).
B Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier level
is turned up and driven into distortion or clipping). Speaker
mechanical failure (e.g. punctures, tears or rips). Cracked or
damaged LCD panels. Dropped or damaged hard drives.
C Damage caused by negligence, misuse, improper operation
or failure to follow instructions contained in the Owner’s
manual.
D Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of
the product.
E Service performed by an unauthorized person, company or
association.
F Any product which has the serial number defaced, altered or
removed.
G Any product which has been adjusted, altered or modified
without Alpine’s consent.
H Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
I Any product not purchased from an Authorized Alpine
Dealer.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair and for
payment of any initial shipping charges. Alpine will, at its
option, repair or replace the product with a new or
reconditioned product without charge. If the repairs are
covered by the warranty, and if the product was shipped to an
Authorized Alpine Service Center or Alpine, Alpine will pay
the return shipping charges.
B You should provide a detailed description of the problem(s)
for which service is required.
C You must supply proof of your purchase of the product.
D You must package the product securely to avoid damage
during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE
AND MERCHANTABILITY ARE LIMITED IN DURATION TO
THE PERIOD OF THE EXPRESS WARRANTY SET FORTH
ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR
ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY
THE PRODUCT. THE TERM “INCIDENTAL DAMAGES”
REFERS TO EXPENSES OF TRANSPORTING THE
PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF
THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF
THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF THE
PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES”
REFERS TO THE COST OF REPAIRING OR REPLACING
OTHER PROPERTY WHICH IS DAMAGED WHEN THIS
PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES
PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND
IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province. In addition, some states/provinces do not allow
limitations on how long an implied warranty lasts, and some do
not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, limitations as to these
matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product
has been installed in your vehicle by an Authorized Installation
Center, and this warranty stamped upon installation by the
installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION
1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
01GB07INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
Download PDF