Holmes 600R [0501688] [01/2010]

Holmes 600R [0501688] [01/2010]
OWNER'S MANUAL
600R
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501688
01 / 2010
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2010 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 thru I-5
BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-6 & I-7
UNDERLIFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8 & I-9
UNDERLIFT HOSE TENSIONER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-10 & I-11
CROSSBAR & OUTER CROSSTUBE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 & I-13
UNDERLIFT LIFT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 & I-15
UNDERLIFT TILT & EXTEND HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 & I-17
600R RECOVERY FRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-18 & I-19
600R RECOVERY BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-20 & I-21
600R RECOVERY BOOM HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-22 & I-23
PUMP, VALVE & FILTER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-24 & I-25
CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-26 & I-27
MANUAL IN/OUT FRONT OUTRIGGER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-28 & I-29
MANUAL IN/OUT FRONT OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-30 & I-31
HYDRAULIC IN/OUT FRONT OUTRIGGER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-32 & I-33
HYDRAULIC IN/OUT FRONT OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-34 & I-35
REAR OUTRIGGER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-36 & I-37
REAR OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-38 & I-39
BOOM SWIVEL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-40
HYDRAULIC CYLINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-41
ii
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Holmes 600R
that may be required when part replacement is necessary. Be certain to use only original equipment replacement
parts for warranty purposes as well as for keeping your unit in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer’s Parts
Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-3
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY (cont'd)
ITEM
PART NUMBER
512-086601
512-088301
3012-980100
3116-700007
3116-710021
3116-710022
3116-710024
3116-710025
3116-710026
3116-710027
3116-710028
3116-710030
3116-710031
3116-710032
3116-710502
3116-716001
3116-810000
3116-810200
3116-810300
3116-810500
3116-818000
3116-818100
3116-819000
3116-819200
3116-819500
3116-919100
0307650
0400060
0400066
0400078
0400109
0400121
0400122
0400126
0400132
0400177
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-149
CONTROL VALVE, P70CF-06-US15-148
HYDRAULIC TANK ASSY
PIN - FRONT OUTRIGGER OUTER ROLLER
LH DCV MTG. CHANNEL RH DCV MTG. CHANNEL TIE PLATE - JACKLEG / TILT COLUMN
COVER - JACK LEG
SPACER PLATE - REAR JACK LEG
BOTTOM SLEW COVER PANEL CENTERING SWITCH MTG. ANGLE
1/4” SHIM PLATE - U/L ASSEMBLY
3/16” SHIM PLATE - U/L ASSEMBLY
LATCH PLATE ROLLER SPACER ROLLER - FRONT OUTRIGGER ASSY
SUBFRAME WELDMENT
RH HYD TANK MTG. BRACKET WELD’T
LH HYD. TANK MTG. BRACKET WELD’T
OUTSIDE ROLLER BRACKET WELD’T LH RETAINER BRACKET WELD’T RH RETAINER BRACKET WELD’T REAR BODY MTG. BRACKET WELD’T DCV COVEFR PANEL WELD’T VALVE PAN WELDMENT
SLEW LOCK ASSEMBLY
BEARING ASSEMBLY
1/4-20 X 1/2 LG. HHCS GR.5
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 2 HHCS GR5 ZP
5/16-18 X 1 HHCS GR.5,ZP
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
I-4
QTY
1
1
2
2
1
1
1
2
4
2
1
1
1
2
2
4
1
2
2
2
1
1
2
2
2
1
1
8
16
2
2
8
2
28
6
5
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY (cont'd)
ITEM
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
PART NUMBER
0400181
0400186
0400193
0400336
0400357
0400367
0400382
0400392
0400408
0400416
0400431
0400443
0400450
0400451
0400452
0400463
0400464
0400480
0400482
0400490
0400492
0400497
0400510
0400759
0400760
0400763
0401021
0712380
9041404
9046363
9056125
9402970
810350002
BA0259
HD0160
HE0239
HE0240
DESCRIPTION
1/2-13 X 1-1/2 HHCS GR 5 ZP
1/2-13 X 3-1/2 HHCS GR 5 ZP
1/2-13 X 1-1/2 FLAT HEAD SKT CAP SCREW
1-8 X 3 HHCS GR8 ZP
#10-32 NYLOCK HEX NUT ZP
1/4-20 NYLOCK HEX NUT ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT GR.8, ZP
3/4-10 NYLOCK HEX NUT GR.8, ZP
1-8 NYLOCK HEX NUT GR.8 ZP
#10 FLATWASHER SAE ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
5/16 FLAT WASHER ZP
5/16 HELICAL LOCK WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
3/4 FLAT WASHER GR.8
1/2 FLAT WASHER ZP
1/2 FLAT WASHER GR.8,YZ PLATED
3/4 FLAT WASHER ZP
#10-32 X 1-3/4” PAN HEAD SCREW
3/4-10 X 5 SOCK.HD.CAP SCREW GR.8
3/4-10 X 5-1/4 LG. HHCS GR.8
3/4-10 X 2 HHCS GR.8 ZP
“D” RING
1/2-13 X 1-3/4 LG. HHCS GR.8
SPRING PIN, 5/16” X 1-1/4”
SNAP RING - 1-1/4” HEAVY DUTY
TOOLBOX MTG. PAD
PIN, UPPER TILT CYLINDER
PIN, ‘D’ RING
SNAP RING, 3/4” EXTERNAL
LIMIT SWITCH, DOOR
ARM, LIMIT SWITCH1
I-5
QTY
3
8
2
2
2
18
6
25
10
4
3
2
2
16
8
4
4
22
20
4
6
4
4
2
1
1
1
2
4
2
4
8
2
2
4
1
Section I - PARTS (cont'd)
BODY ASSEMBLY
I-6
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
BODY ASSEMBLY
PART NUMBER
3116-780004
3116-780005
3116-780006
0303128
0306684
0306685
0307215
0307216
0307220
0307538
0311026
0400103
0400382
0400463
0400464
3116-870000
3116-871000
GO-138B
DESCRIPTION
LH MUD FLAP BRACKET
RH MUD FLAP BRACKET
PLATE-MUD FLAP BACKING
GROMMET, TAIL LIGHT
LIGHT, BACKUP
GROMMET, LED LIGHT 45 STT
LED LIGHT, RED 45 STT
LED LIGHT, AMBER 45 REAR TURN
LIGHT OVAL AMBER 60 LED
LIGHT, MARKER - RED 4.5 X 1.63
DOOR LATCH
5/16-18 X 1 1/4 HHCS GR.5, ZP
5/16-18 NYLOCK HEX NUT ZP
5/16 FLAT WASHER ZP
5/16 HELICAL LOCK WASHER ZP
BODY, LH WELDMENT ALUMINUM
BODY, RH WELDMENT ALUMINUM
MUDFLAP
I-7
QTY
1
1
2
2
2
8
4
2
2
2
6
14
8
22
6
1
1
2
Section I - PARTS (cont'd)
UNDERLIFT ASSEMBLY
I-8
Section I - PARTS (cont'd)
UNDERLIFT ASSEMBLY
ITEM
PART NUMBER
511-3000002
511-3000004
511-5000001
3012-700002
3012-700003
3012-794002
3012-794003
3012-794004
3014-700002
3014-801000
3014-850000
3116-700001
3116-700002
3116-700003
3116-740001
3116-749001
3116-749002
3116-749003
3116-749004
3116-749005
3116-749006
3116-840000
3116-842000
3116-842100
3116-845000
0300113
0301895
0307655
0400121
0400128
0400133
0400218
0400223
0400257
0400392
0400408
0400421
0400482
0400487
0400491
0400492
0400505
0400991
9041353
9056125
9056150
9057125
806510001
880060004
896040002
897400001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
DESCRIPTION
CYL,- STINGER EXTEND
CYLINDER ~ 3” BORE / 1-1/2” ROD
CYL - STINGER TILT
PIN - STINGER
PIN - UL EXT (ROD)
PLATE - XBAR POSITIONING
BAR - SPACER
PLATE - UL PAD CAGE
PIN - FOLD (BASE)
PIN WELDMENT
U/L INNER BOOM WELD’T
PIN - STINGER UPPER LIFT
PIN - HOSE SHEAVE ASSY
PIN - STINGER UPPER LIFT
PAD
SHEAVE - HOSE TENSIONER ASSY
PLATE - PAD RETAINER OUTER TILT
SPACER PLATE - OUTER TILT COLUMN
PLATE - PAD RETAIN INNER TLT COL
SIDE WEAR PAD -INNER TILT COLUMN ASSY
COVER - OUTER COLUMN
OUTER STINGER WELDMENT
OUTER TILT COLUMN WELDMENT
FIXED SHEAVE BRACKET WELD’T
INNER TILT COLUMN WELDMENT
GREASE FITTING, 1/4-28 STRAIGHT
GREASE FITTING, 1/8 NPT STRAIGHT
RETAINING RING - EXT. #5133-62 3/8-16NC X 3/4 HHCS GR. B
3/8-16X1.25 FLAT HD SOC
3/8-16 X 3 HHCS GR.5,ZP
1/2-13 X 1-1/4 HHCS GR. 5 ZP
3/8-16 X 3/4 FL. HD. SOCKET SCREW
5/8-11 X 3-1/4 HHCS GR5 ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
5/8-11 NYLOCK HEX NUT ZP
3/8 HELICAL LOCK WASHER ZP
7/16 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER ZP
5/8 FLAT WASHER SAE
SCREW - 1/2-13 X 1-1/4 FHSS
7/16-20 UNF X 3/4 LG. HHCS
SNAP RING - 1-1/4” HEAVY DUTY
RETAINING RING, 1-1/2”
SNAP RING, 1-1/4” NOM INTERNAL
BEARING-FLANGED
WEAR PAD
NYLATRON PAD
PIN-FRONT-BOOM EXT.
I-9
QTY
1
2
1
1
1
2
1
1
1
1
1
2
1
2
2
3
2
2
2
2
1
1
1
1
1
5
7
4
18
2
1
4
1
1
3
1
1
18
4
4
4
6
1
4
6
3
6
2
2
4
1
Section I - PARTS (cont'd)
UNDERLIFT HOSE TENSIONER ASSEMBLY
I-10
Section I - PARTS (cont'd)
UNDERLIFT HOSE TENSIONER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NUMBER
3116-744002
3116-744003
3116-744004
3116-744005
3116-844300
0307115
0400066
0400126
0400367
0400392
0400480
0400758
810041500
DESCRIPTION
COVER - HOSE TENSIONER ASSY
SUPPORT CHANNEL TENSION ROLLER
ROLLER SHAFT
HOSE TENSIONER CHANNEL WELD’T
SPRING, EXTENSION EXPRESS
1/4-20 X 3/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
3/8 FLAT WASHER ZP
3/8-16 X 7 LG. HHCS GR.5
TENSIONER BRACKET WELDMENT
I-11
QTY
1
1
1
1
1
1
8
2
8
5
6
1
2
Section I - PARTS (cont'd)
UNDERLIFT CROSSBAR & OUTER CROSSTUBE ASSEMBLY
I-12
Section I - PARTS (cont'd)
UNDERLIFT CROSSBAR & OUTER CROSSTUBE ASSEMBLY
ITEM
PART NUMBER
568-0480001
3014-760107
3014-796005
3014-801100
3014-860000
3014-860100
3014-860600
3014-860700
0300113
0301681
0301682
0301956
0302641
0302648
0400044
0400349
0400367
0400398
0400451
0400480
0400482
0400483
0400485
0400559
0400629
0400980
0707505
0712933
0714415
0803641
0803642
0807485
0807486
0807504
0904744
9012944
9041205
9047057
9052013
9056150
HD0107
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
DESCRIPTION
SPRING- CROSSBAR END
PIN - RETAINING
SPACER, CROSSBAR DIE SPRING
PIN - CROSSBAR
CROSSBAR-FABRICATED
EXTENSION BRKT - XBAR
CROSSTUBE- OUTER
CROSSTUBE- OUTER
GREASE FITTING, 1/4-28 STRAIGHT
TIRE RESTRAINT BELT EXTENSION
TIRE RESTRAINT BELT ASSEMBLY
STRAP, RUBBER 10” W/S-HOOK
SPRING - HOSE TENSIONER
T HANDLE
DRIVE SCREW, #10-24 X 1/2” RD HD
SCREW, 3/8”-16 X 3/4” FL HD SKT
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HALF-NUT ZP
1/4 FLAT WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
LOCKWASHER, 3/8” COUNTERSUNK
3/8 SAE FLATWASHER GR8
3/16 X 1 ROLL PIN ZP
SCREW, 1/4”-20 X 3/4” FL SKT HD
3/8”-16 X 1” FL HD SKT CAP SCREW
PLUNGER PIN
ALIGNMENT PIN
PIN
TIRE RESTRAINT WELDMENT, LH
TIRE RESTRAINT WELDMENT, LH
L ARM RECIVER (LH)
L ARM RECIVER (RH)
PIVOT SHAFT
PIN ASSEMBLY
PIPE PLUG, 1” NPT SKT HD
3/8-16 X 1 LG. HHCS GR.8
DETENT SPRING
BALL, 1” CHROME
RETAINING RING, 1-1/2”
SPRING PIN, 3/16 X 2
I-13
QTY
2
2
1
1
1
2
1
1
5
2
2
2
2
2
4
2
2
2
2
1
1
2
2
2
2
2
2
2
2
1
1
1
1
2
2
1
1
1
1
1
2
Section I - PARTS (cont'd)
UNDERLIFT LIFT HYDRAULICS
I-14
Section I - PARTS (cont'd)
UNDERLIFT LIFT HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
512-086601
0301522
0301620
0301778
0302509
0302586
0302604
0302806
0306700
0400073
0400367
511-3000004
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-149
CONNECTOR 6MJ-6MB
FITTING, ELBOW, 6MJ-6MB90
CONNECTOR 6MJX10MB
ELBOW, 6MJ-6MB90
HOSE ASSY - 54” LG
HOSE ASSY - 44” LG
HOSE ASSY - 18” LG
MANIFOLD BLOCK
1/4-20 X 2 3/4 HHCS GR5 ZP
1/4-20 NYLOCK HEX NUT ZP
CYL, STINGER LIFT
I-15
QTY
1
6
2
2
2
1
1
4
1
2
2
2
Section I - PARTS (cont'd)
UNDERLIFT TILT & EXTEND HYDRAULICS
I-16
Section I - PARTS (cont'd)
UNDERLIFT TILT & EXTEND HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART NUMBER
512-086601
0301522
0301778
0302509
0307669
0307670
0310088
0310089
FC41
511-3000002
511-5000001
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-149
CONNECTOR 6MJ-6MB
CONNECTOR 6MJX10MB
ELBOW, 6MJ-6MB90
HOSE ASSY - 60” LG
HOSE ASSY - 60” LG
HOSE ASSY - 108” LG
HOSE ASSY - 51” LG
ELBOW - BULKHEAD
CYL, STINGER EXTEND
CYL, STINGER TILT
I-17
QTY
1
2
4
2
2
2
2
2
4
1
1
Section I - PARTS (cont'd)
RECOVERY FRAME ASSEMBLY
I-18
Section I - PARTS (cont'd)
RECOVERY FRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART NUMBER
511-5000002
512-080001
515-000101
3116-700008
3116-700009
3116-710029
3116-819300
3116-819400
3116-890000
0307651
0400066
0400081
0400177
0400219
0400237
0400367
0400408
0400431
0400451
0400452
0400491
0400761
0400762
DESCRIPTION
CYL, BOOM LIFT TUBE
LOAD CONTROL VALVE DIR MOTOR M
HYDRAULIC MOTOR, PARKER
PIN - MAIN BOOM PIVOT
PIN - MAIN BOOM LOWER LIFT CYL.
CENTERING SWITCH FLAG PLATE
REAR SLEW SHIEL WELD’T FRONT SLEW SHIELD WELD’T ROTATOR MAST WELDMENT ~ 16 TON
PLANETRY GEARBOX
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 3-1/2 LG. HHCS GR.5
1/2-13 X 1 1/4 HHCS GR. 5, ZP
1/2-13 X 4-1/2 HHCS GR.5 ZP
1/2-13 X 4 HHCS GR 5 ZP
1/4-20 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
3/4-10 NYLOCK HEX NUT GR.8, ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
3/4-10 X 3-3/4 LG. HHCS GR.8
3/4”-10 X 3-3/4” LG. FL HD SKT CAP SCREW
I-19
QTY
2
1
1
1
2
1
1
1
1
1
3
4
2
2
1
1
3
4
2
6
2
2
2
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
I-20
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
ITEM
PART NUMBER
511-3000001
514-1501101
535-0500001
3012-792002
3012-793001
3014-791001
3014-792001
3014-821000
3014-830000
3014-931000
3116-792001
3116-820000
0300113
0301642
0301814
0301895
0301949
0400057
0400060
0400126
0400147
0400257
0400274
0400367
0400421
0400426
0400451
0400452
0400480
0400482
0400491
0400503
0402118
9012549
9012552
9012584
9041404
9048800
9056125
897400001
897400002
915352000
945030007
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
DESCRIPTION
CYL - MAIN BOOM EXT
WINCH, 15K DP 15J
NYLATRON PAD
PLATE - PAD CAGE
PLATE - LUBE MOUNT
PLATE - 14K WASHER
PLATE - CABLE WING
BRACKET - 14K DP
INNER BOOM WELDMT-DUAL DP8_10
SHEAVE ASSY - 3014
FLANGED BEARING - BOOM PIVOT
MAIN BOOM WELDMENT
GREASE FITTING, 1/4-28 STRAIGHT
SNAP RING, 1-1/4” RETAINING RING, 3-1/2” EXTERNAL
GREASE FITTING, 1/8 NPT STRAIGHT
3/8” OD AIRLINE - SYNFLEX HOSE
1/4-20 X 1-1/4 HHCS ZP
1/4-20 X 1/2 LG. HHCS GR.5
3/8-16 X 1 HHCS GR.5,ZP
3/8-24X 5/8 HHCS GR5 ZP
5/8-11 X 3-1/4 HHCS GR5 ZP
5/8-11 X 2 HHCS GR 8 YZ P
1/4-20 NYLOCK HEX NUT ZP
5/8-11 NYLOCK HEX NUT ZP
5/8-11 NYLOCK NUT GR.8 ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
5/8 FLAT WASHER GR.8
5/16 HELICAL LOCK WASHER SS
CONNECTOR, 3/8 TUBE X 1/8 NPT
BULKHEAD COUPLING, 1/8 ELBOW, 1/4 NPT X 3/8 TUBE 90
1/2-13 X 1-3/4 LG. HHCS GR.8
5/8 WELDLESS CHAIN LINK
SNAP RING - 1-1/4” HEAVY DUTY
PIN-FRONT-BOOM EXT.
PIN-FRONT-BOOM EXT.
PIN WELD’T - CYL. MTG.
SPRING - HOSE TENSIONER
I-21
QTY
1
2
2
2
1
4
2
1
1
2
2
1
4
2
2
2
1
4
2
2
4
2
4
4
2
4
8
2
2
4
12
4
2
1
1
1
12
2
2
1
1
2
2
Section I - PARTS (cont'd)
RECOVERY BOOM HYDRAULICS
I-22
Section I - PARTS (cont'd)
RECOVERY BOOM HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART NUMBER
511-5000002
512-086601
512-088301
514-1501101
0300041
0301388
0301522
0301659
0301778
0301783
0302508
0302509
0303174
0303176
0307658
0307659
0307662
0307663
0307668
9012594
12833018
806750109
511-3000001
DESCRIPTION
CYL, BOOM LIFT TUBE
CONTROL VALVE, P70CF-06-US15-149
CONTROL VALVE, P70CF-06-US15-148
WINCH, 15K DP 15J
CONNECTOR 8MJX8MB
ELBOW, 8MJ-8MB90
CONNECTOR 6MJ-6MB
HOSE ASSY - 150” LG
CONNECTOR 6MJX10MB
CONNECTOR 8MJX10MB
ELBOW, 8MJ-8MB90LL
ELBOW, 6MJ-6MB90
CONNECTOR 10MPX8FB
CONNECTOR 10MPX8FB
HOSE ASSY - 105” LG
HOSE ASSY - 105” LG
HOSE ASSY - 150” LG
HOSE ASSEMBLY, 185”
HOSE ASSY - 120” LG
FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
HOSE ASSY - 185” LG
HOSE ASSY
CYL, MAIN BOOM EXTENSION
I-23
QTY
2
1
1
2
2
4
4
1
2
4
2
2
4
2
1
1
1
1
2
2
1
2
1
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
I-24
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
ITEM
PART NUMBER
512-080001
512-081101
512-086601
512-088301
515-000101
3012-880100
3012-980100
0300052
0300787
0301371
0301376
0301388
0301547
0301581
0301620
0301778
0302084
0302205
0302842
0302906
0302909
0302955
0302959
0303155
0303366
0303861
0303867
0306539
0307651
0307664
0307665
0307666
0307667
0307812
0310019
9012927
9018131
9018399
HC1291
HC1338
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
DESCRIPTION
LOAD CONTROL VALVE DIR MOTOR M
SOLENOID OPERATED VALVE 2 WAY
CONTROL VALVE, P70CF-06-US15-149
CONTROL VALVE, P70CF-06-US15-148
HYDRAULIC MOTOR, PARKER
HYDRAULIC TANK WELDMT
HYDRAULIC TANK ASSY
ELBOW, 8MJ-10MB90
HOSE ASSEMBLY - 53” LG
ELBOW, 8MJ-12MP90
CONNECTOR 8MJX10MB
ELBOW, 8MJ-8MB90
ELBOW, 8MJ-12MB90
HOSE ASSY - 119” LG
FITTING, ELBOW, 6MJ-6MB90
CONNECTOR 6MJX10MB
ELBOW, 16MB-16FB90
GAUGE, FLUSH MOUNT 6000 PSI
ELBOW, 8MJ-8MB90
ADAPTER, 16MB-12FB
HOSE ASSY - 36” LG
HOSE ASSY - 48 1/4”
PIPE NIPPLE, 1” NPT X 3”
PIPE PLUG - 3/4 NPT (MAGNETIC)
FITTING, ELBOW, 4MJ-6MB90
HOSE ASSEMBLY, 17”
PUMP, BI-ROTATIONAL HOSE BARB, 20HOSE-16MB90
PLANETRY GEARBOX
HOSE ASSY - 18” LG
HOSE ASSY - 29” LG
HOSE ASSY - 120” LG
HOSE ASSY - 91” LG
HOSE ASSY - 222” LG
SUCTION HOSE, 12 FT (1” ID)
PIPE NIPPLE, 1” NPT X 1-1/4” BARB
BREATHER CAP
IMMERSION FILTER ASSEMBLY
CONNECTOR, 4MJ-4MB STR
BALL VALVE, 1” BRASS
I-25
QTY
1
2
1
1
1
2
2
2
1
4
2
2
2
1
2
4
4
2
2
2
1
1
4
2
1
1
1
2
1
1
1
2
2
2
1
4
2
4
1
4
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
I-26
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
ITEM
PART NUMBER
518-0106000
518-0116000
3014-700003
3014-700004
3014-791012
3014-798701
3116-775001
3116-775002
3116-775101
3116-775102
0300341
0302205
0302726
0306537
0306540
0307166
0307604
0400066
0400070
0400173
0400365
0400366
0400367
0400393
0400451
0400452
0400458
0400482
0400527
0806852
0807538
0807539
0807540
0807541
9024041
9053524
HD0900
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
DESCRIPTION
CONTROL CABLE - 1/4” X 60” LG.
CONTROL CABLE - 1/4” X 60” LG.
PIN - CONTROLS
PIN - CONTROLS
CLEVIS - DUAL CTRL CABLE
BLOCK - RETAINING
LH LOWER CONTROL PANEL
LH UPPER CONTROL PANEL
RH LOWER CONTROL PANEL
RH UPPER CONTROL PANEL
KNOB, BLACK (BLANK)
GAUGE, FLUSH MOUNT 6000 PSI
GREASE FITTING, 1/4”-28 X 45°
EMERGENCY SWITCH (RAMSEY)
ROTARY SELECT SWITCH OPERATOR
PLUG 7/8
KNOB - RED LONG
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 1 HHCS GR5 ZP
SCREW, 3/8”-16 X 2” HEX HD CAP GR8
HEX NUT, 1/4”-28
1/4-20 HEX NUT ZP
1/4-20 NYLOCK HEX NUT ZP
3/8”-16 HEX JAM NUT
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
1/4 STAR LOCKWASHER ZP
3/8 HELICAL LOCK WASHER ZP
CLEVIS PIN, 5/16” X 5/8” COTTERLESS
CONTROL HANDLE WLMT
REAR CONTROL BRACKET
FRONT CONTROL BRACKET
CONTROL BAR WLMT
CONTROL BAR WLMT
MCGILL SWITCH
BRONZE BUSHING (.752 X .879 X .750)
BEARING, ROD END, 1/4-28
I-27
QTY
20
12
2
2
8
8
1
1
1
1
12
2
16
2
8
8
4
12
16
16
32
16
17
16
12
12
48
16
8
16
2
2
2
2
8
32
16
Section I - PARTS (cont'd)
MANUAL IN/OUT FRONT OUTRIGGER ASSEMBLY
I-28
Section I - PARTS (cont'd)
MANUAL IN/OUT FRONT OUTRIGGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
PART NUMBER
3116-700004
3116-700005
3116-700010
3116-700011
3116-716001
3116-716002
3116-716003
3116-716004
3116-816600
3116-816700
3116-816800
3116-816900
3116-916300
0302474
0303521
0400059
0400060
0400126
0400392
0400452
0400510
0400568
0400573
9056125
9057125
810350002
HD0106
HD0160
HD1259
511-3000005
3116-816000
DESCRIPTION
PIN - FRONT OUTRIGGER INNER ROLLER
PIN - FRONT OUTRIGGER LOWER CYL.
PIN - PIVOT - FR. OUTRIGGER SPADE
PIN - RETAINING - FR. OUTRIGGER SPADE
ROLLER - FRONT OUTRIGGER ASSY
ROLLER MTG. PLATE ROLLER SPACER COVER PLATE - FRONT OUTRIGGER
FRONT VERT. OUTRIGGER - SWIVEL
FRONT OUTRIGGER SPADE WELD’T OUTRIGGER STOP BLOCK WELD’T HANDLE WELDMENT
HOSE TENSIONER SHEAVE ASSY
PIN, LYNCH
SPRING, HOSE TENSIONER
1/4-20 X 5/8 HHCS GR 5 ZP
1/4-20 X 1/2 LG. HHCS GR.5
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
3/4 FLAT WASHER ZP
3/8 X 3 ROLL PIN ZP
3/16 X 1-1/4 ROLL PIN ZP
SNAP RING - 1-1/4” HEAVY DUTY
SNAP RING, 1-1/4” NOM INTERNAL
PIN, UPPER TILT CYLINDER
1/4 X 1-3/4 ROLL PIN ZP
SNAP RING, 3/4” EXTERNAL
SAFETY SNAP PIN
CYLINDER, FRONT OUTRIGGER
FRONT OUTRIGGER WELD’T
I-29
QTY
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
4
4
4
4
2
2
1
2
2
1
1
2
1
1
1
Section I - PARTS (cont'd)
MANUAL IN/OUT FRONT OUTRIGGER HYDRAULICS
I-30
Section I - PARTS (cont'd)
MANUAL IN/OUT FRONT OUTRIGGER HYDRAULICS
ITEM
PART NUMBER
512-088301
516-0600002
516-0600003
0301522
0301778
0302510
0303389
0307657
0307845
0307846
0307847
0310107
0310108
0310109
0310110
FC41
511-2000001
511-3000005
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-148
TUBE,HYD ASSY 3/8X61 STL TUBE
TUBE,HYD ASSY 3/8X59. STL TUBE
CONNECTOR 6MJ-6MB
CONNECTOR 6MJX10MB
CONNECTOR, 6MJ-6MBL
HOSE ASSY - 46” LG.
HOSE ASSY - 80” LG
HOSE ASSY - 79” LG
HOSE ASSY - 84” LG
HOSE ASSY - 45” LG
HOSE ASSY - 68” LG
HOSE ASSY - 68” LG
HOSE ASSY - 68” LG
HOSE ASSY - 68” LG
ELBOW - BULKHEAD
CYL, FRONT OUTRIGGER EXTENSION
CYLINDER, FRONT OUTRIGGER
I-31
QTY
1
2
2
6
8
2
1
4
1
1
1
1
1
1
1
4
2
2
Section I - PARTS (cont'd)
HYDRAULIC IN/OUT FRONT OUTRIGGER ASSEMBLY
I-32
Section I - PARTS (cont'd)
HYDRAULIC IN/OUT FRONT OUTRIGGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
PART NUMBER
511-2000001
511-3000007
3116-700005
3116-700010
3116-700011
3116-700016
3116-700017
3116-710033
3116-716004
3116-816700
3116-816800
3116-816900
3116-916300
0302474
0303521
0400044
0400059
0400060
0400367
0400392
0400452
0400568
0400573
0400612
9041212
9056125
9057125
25088017
25088019
810350002
897040002
HD0106
HD1259
DESCRIPTION
BOOM EXTEND CYLINDER
CYLINDER, SPADE
PIN - FRONT OUTRIGGER LOWER CYL.
PIN - PIVOT - FR. OUTRIGGER SPADE
PIN - RETAINING - FR. OUTRIGGER SPADE
PIN - FRONT OUTRIGGER EXTEND PIN - FRONT OUTRIGGER EXTEND CYLINDER MTG. BLOCK
COVER PLATE - FRONT OUTRIGGER
FRONT OUTRIGGER SPADE WELD’T OUTRIGGER STOP BLOCK WELD’T HANDLE WELDMENT
HOSE TENSIONER SHEAVE ASSY
PIN, LYNCH
SPRING, HOSE TENSIONER
DRIVE SCREW, #10-24 X 1/2” RD HD
1/4-20 X 5/8 HHCS GR 5 ZP
1/4-20 X 1/2 LG. HHCS GR.5
1/4-20 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
3/8 X 3 ROLL PIN ZP
3/16 X 1-1/4 ROLL PIN ZP
1/4-20 X 1 FLAT HEAD SOCKET CAP SCREW
3/8-16 X 2-3/4 LG. HHCS GR.8
SNAP RING - 1-1/4” HEAVY DUTY
SNAP RING, 1-1/4” NOM INTERNAL
FRONT OUTRIGGER WELD’T
FRONT VERT. OUTRIGGER - SWIVEL
PIN, UPPER TILT CYLINDER
TOP PAD INNER BOOM
1/4 X 1-3/4 ROLL PIN ZP
SAFETY SNAP PIN
I-33
QTY
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
4
2
4
6
2
1
2
4
2
4
1
1
1
1
1
1
Section I - PARTS (cont'd)
HYDRAULIC IN/OUT FRONT OUTRIGGER HYDRAULICS
I-34
Section I - PARTS (cont'd)
HYDRAULIC IN/OUT FRONT OUTRIGGER HYDRAULICS
ITEM
PART NUMBER
512-088301
516-0600002
516-0600003
0301522
0301778
0301783
0303389
0307657
0307845
0307846
0307847
FC41
511-3000005
1
2
3
4
5
6
7
8
9
10
11
12
13
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-148
TUBE,HYD ASSY 3/8X61 STL TUBE
TUBE,HYD ASSY 3/8X59. STL TUBE
CONNECTOR 6MJ-6MB
CONNECTOR 6MJX10MB
CONNECTOR 8MJX10MB
HOSE ASSY - 46” LG.
HOSE ASSY - 80” LG
HOSE ASSY - 79” LG
HOSE ASSY - 84” LG
HOSE ASSY - 45” LG
ELBOW - BULKHEAD
CYLINDER, FRONT OUTRIGGER
I-35
QTY
1
2
2
4
4
4
1
4
1
1
1
4
2
Section I - PARTS (cont'd)
REAR OUTRIGGER ASSEMBLY
I-36
Section I - PARTS (cont'd)
REAR OUTRIGGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART NUMBER
3116-700006
3116-700012
3116-700013
3116-700014
3116-700015
3116-712020
3116-812000
3116-813000
3116-812500
3116-814000
3116-814500
3116-816800
0300113
0302474
0400044
0400059
0400452
0400568
0400573
9046354
9057125
HD0106
HD1259
511-3000005
DESCRIPTION
PIN - LOWER JACK LEG CYL.
PIN - PIVOT - REAR OR SPADE
PIN - RETAINING – REAR OR SPADE
PIN - PIVOT - JACKLEG SPADE
PIN - RETAINING - JACKLEG SPADE
COVER PANEL - REAR OUTRIGGFER
LH REAR JACK LEG / OUTRIGGER WELD’T
RH REAR JACKLEG OUTRIGGER WELD’T
SPADE WELDMENT - REAR OUTRIGGER
REAR INNER OUTRIGGER WELD’T
REAR OUTRIGGER PAD WELD’T
OUTRIGGER STOP BLOCK WELD’T GREASE FITTING, 1/4-28 STRAIGHT
PIN, LYNCH
DRIVE SCREW, #10-24 X 1/2” RD HD
1/4-20 X 5/8 HHCS GR 5 ZP
1/4 HELICAL LOCK WASHER ZP
3/8 X 3 ROLL PIN ZP
3/16 X 1-1/4 ROLL PIN ZP
1/4 X 2-1/2 ROLL PIN ZP
SNAP RING, 1-1/4” NOM INTERNAL
1/4 X 1-3/4 ROLL PIN ZP
SAFETY SNAP PIN
CYLINDER, FRONT OUTRIGGER
I-37
QTY
2
2
2
2
2
2
1
1
2
2
2
2
2
4
8
12
12
4
4
4
4
4
4
2
Section I - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
I-38
Section I - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
ITEM
1
2
3
4
5
6
PART NUMBER
512-086601
0301522
0301778
880010013
880010014
511-3000005
DESCRIPTION
CONTROL VALVE, P70CF-06-US15-149
CONNECTOR 6MJ-6MB
CONNECTOR 6MJX10MB
HOSE ASSY - HOSE ASSY - CYLINDER, FRONT OUTRIGGER
I-39
QTY
1
4
4
2
2
2
Section I - PARTS (cont'd)
BOOM SWIVEL ASSEMBLY
ITEM
PART NUMBER
3014-802000
3014-831000
3014-831100
0300626
0400147
0400184
0400408
0400482
1
2
3
4
5
6
7
8
DESCRIPTION
PIN WELD’T
SHEAVE WELDMENT - 3014
GUIDE - SWIVEL
SHEAVE - 8”
3/8-24 X 5/8 HHCS GR5 ZP
1/2-13 X 2-1/4 HHCS GR 8 ZP
1/2-13 NYLOCK HEX NUT ZP
3/8 HELICAL LOCK WASHER ZP
I-40
QTY
1
1
1
1
1
1
1
1
Section I - PARTS (cont'd)
HYDRAULIC CYLINDERS
ITEM
PART NUMBER
DESCRIPTION
QTY
1
--
511-2000001
--
CYLINDER, FRONT OUTRIGGER EXTEND
SEAL KIT, FRONT O/R EXTEND CYLINDER
2
--
2
--
511-3000001
--
CYLINDER, BOOM EXTEND
SEAL KIT, BOOM EXTEND CYLINDER
1
--
3
--
511-3000002
--
CYLINDER, UNDERLIFT EXTEND
SEAL KIT, UNDERLIFT EXTEND CYLINDER
1
--
4
--
511-3000004
--
CYLINDER, UNDERLIFT LIFT
SEAL KIT, UNDERLIFT LIFT CYLINDER
2
--
5
--
511-3000005
--
CYLINDER, OUTRIGGER LIFT
SEAL KIT, OUTRIGGER LIFT CYLINDER
4
--
6
--
511-5000001
--
CYLINDER, UNDERLIFT TILT
SEAL KIT, UNDERLIFT TILT CYLINDER
1
--
7
--
511-5000002
--
CYLINDER, BOOM LIFT
SEAL KIT, BOOM LIFT CYLINDER
2
--
I-41
NOTES
NOTES
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement