ViewSonic | VG710s | Service manual | ViewSonic VG710s Service manual

Service Manual
ViewSonic VG710b/s1
Model No. VLCDS23719-4W
Model No. VLCDS23719-5W
17” Color TFT LCD Display
(VG710s/b-1_SM_718 Rev. 1a Feb. 2004)
ViewSonic“ 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright ¤ 2003 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
Date
1a
02/26/04
Description Of Changes
Initial Release DCN-3601
Approval
Angela Luh
Confidential - Do Not Copy
ViewSonic Corporation
i
VG710b/s-1
TABLE OF CONTENTS
1.
Precautions and Safety Notices
1
2.
Specification
5
3.
Front Panel Function Control Description
8
4.
Circuit Description
11
5.
Adjusting Procedure
13
6.
Trouble Shooting Flow Chart
36
7.
Recommended Spare Parts List
40
8.
Exploded Diagram And Spare Parts List
47
9.
Block Diagram
57
10.
Schematic Diagrams
58
11.
PCB Layout Diagrams
64
Confidential - Do Not Copy
ViewSonic Corporation
ii
VG710b/s-1
1. Precautions and Safety Notices
1. Appropriate Operation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Turn off the product before cleaning.
Use only a dry soft cloth when cleaning the LCD panel surface.
Use a soft cloth soaked with mild detergent to clean the display housing.
Use only high quality and safety approved AC/DC power adapter.
Disconnect the power plug from AC outlet if the product is not used for a long period of time.
If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
Do not touch the LCD panel surface with sharp or hard objects.
Do not place heavy objects on the LCD display, video cable, or power cord.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. Power Supply Requirements
The external power converter for this display utilizes AC and DC cords, AC cord is detachable, but DC cord is permanently
attached. Any attempt to replace another adapter could result in serious problem on the display.
5. LCD Module Handling Precautions
5.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when inserting or disconnecting from input connector.
(3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL
Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
Confidential - Do Not Copy
ViewSonic Corporation
1
VG710b/s-1
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist nor
bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that
no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
Confidential - Do Not Copy
ViewSonic Corporation
2
VG710b/s-1
5.2 Handling and Placing Methods
Correct Methods:
Incorrect Methods:
Only touch the metal frame of the LCD panel or the front
cover of the monitor. Do not touch the surface of the
polarizer.
Surface of the LCD panel is pressed by fingers and that
may cause “Mura.”
Take out the monitor with cushions
Taking out the monitor by grasping the LCD panel. That
may cause “Mura.”
Confidential - Do Not Copy
ViewSonic Corporation
3
VG710b/s-1
Placing the monitor on foreign objects. That could
scratch the surface of the panel or cause “Mura.”
Place the monitor on a clean and soft foam pad.
The panel is placed facedown on the lap. That
may cause “Mura.”
Confidential - Do Not Copy
ViewSonic Corporation
4
VG710b/s-1
2. Specification
1. General Requirements
General Specifications
Test Resolution & Frequency
Test Image Size
Contrast and Brightness Controls
“1280 x 1024” @ 60Hz
Full Size
Factory Default:
Contrast = 50%, Brightness = 100%
2. Signal Interface
Video Interface
Analog Input Connector
Digital Input Connector
Default Input Connector
Video Cable Connector DB-15 Pin out
Video Signals
DB-15 (Analog)
DVI-D (Digital)
Defaults to the first detected input
Compliant DDC 1/2B.
1. Video RGB (Analog) Separate Sync
2. TMDS (Digital)
Video Impedance
Exclusions
75 Ohms (Analog), 100 Ohms (Digital)
Not compatible with interlaced video.
3. Power
Power Supply
External Power Supply
Input Voltage Range
Over Voltage Protection
Power Dissipation
Part Number: LSE 0107A1240
90 to 264 VAC
12.7~18V FULL LOAD
36 WATTS (TYP)
4. Electrical Requirements
Horizontal / Vertical Frequency
Horizontal Frequency
Vertical Refresh Rate
Maximum Pixel Clock
Primary Preset
Look up table timing
<<Analog>>
1. 640 x 350 @ 70Hz, 31.5kHz
2. 640 x 480 @ 60Hz, 31.5kHz
3. 640 x 480 @ 67Hz, 35.0kHz
4. 640 x 480 @ 75Hz, 37.5kHz
5. 640 x 480 @ 72Hz, 37.9kHz
6. 640 x 480 @ 85Hz, 43.27kHz
7. 720 x 400 @ 70Hz, 31.5kHz
8. 800 x 600 @ 56Hz, 35.1kHz
9. 800 x 600 @ 60Hz, 37.9kHz
10. 800 x 600 @ 75Hz, 46.9kHz
11. 800 x 600 @ 72Hz, 48.1kHz
12. 800 x 600 @ 85Hz, 53.7kHz
13. 832 x 624 @ 75Hz, 49.7kHz
14. 1024 x 768 @ 60Hz, 48.4kHz
15. 1024 x 768 @ 70Hz, 56.5kHz
16. 1024 x 768 @ 72Hz, 58.1kHz
17. 1024 x 768 @ 75Hz, 60.0kHz
18. 1024 x 768 @ 85Hz, 68.67kHz
19. 1280 x 1024 @ 60Hz, 63.4kHz
20. 1280 x 1024 @ 75Hz, 79.97kHz
30 – 82 kHz
50 – 85 HZ
135 MHz
“1280 x 1024” @ 60Hz
<<Digital>>
640 x 350 @ 70Hz, 31.5kHz
640 x 400 @ 60Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 75Hz, 37.5kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 85Hz, 43.27kHz
720 x 400 @ 70Hz, 31.5kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
800 x 600 @ 85Hz, 53.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1024 x 768 @ 85Hz, 68.67kHz
1280 x 1024 @ 60Hz, 63.4kHz
Confidential - Do Not Copy
ViewSonic Corporation
5
VG710b/s-1
Changing Modes
Maximum Mode Change Blank Time for image
stability. Note:
1) Excluding “Auto Adjust” time
2) Under DOS mode (640 x 350, 720 x 400 & 640 x
400), there is no “Auto Adjust” feature.
3) The monitor needs to do “Auto Adjust” the first
time a new mode is detected.
Under 5 seconds (Maximum)
1 seconds (Typ.) for recognized timings
1-2 seconds (Typ.) for unrecognized timing
.
5. Audio
Speaker Specification
Line input connection
Line input signal
Line input impedance
Maximum power output (Electric)
Signal to Noise Ratio
Frequency response
Distortion
3.5 mm stereo jack
1.0 Vrms
10 kOhm
3 W @ < 5 % DISTORTION
72 dB
400 Hz – 20 kHz
< 5 % THD (@1kHz),
6. LCD Panel
Panel Characteristics
Panel Type
Type
Active Size
Pixel Arrangement
Pixel Pitch
Glass Treatment
# of Backlights
Backlight Life
Panel Performance
Luminance –
Condition:
CT = 6500K, Contrast = Max,
Brightness = Max
Brightness Uniformity
Contrast Ratio
Color Depth
Viewing Angle (Horizontal)
Viewing Angle (Vertical)
Response Time
10%-90% @ Ta=25°C
“LG LM170E01-A5”
“TFT ACTIVE MATRIX
337.9 (H) x 270.3 (V)
RGB Vertical Stripe
0.264 mm
Anti Glare (Hard coating 3H)
4 CCFL edge-light (2 top / 2 bottom)
50,000 Hours (minimum)
250 cd/m2 (typ. after 30-minute warm-up)
200 cd/m2 (minimum after 30-minute warm-up)
∆L5=Max 1.3 ∆L5= Maximum Luminance/
Minimum Luminance
450:1 (typ.), 300:1 (minimum)
16 Million colors (8 bit panel)
140 degrees @ CR>10, 160 degrees @ CR>5
120 degrees @ CR>10, 140 degrees @ CR>5
16 ms (Tr= 2 ms, Tf = 14 ms) (typ.)
30 ms (Tr= 6 ms, Tf = 24 ms) (maximum)
Note: The 2nd source of LCD panel is “AU M170EN05.”
7. Mechanical
Dimensions
Width
Height
Depth
Depth (Head Only)
Monitor Weight
378 mm
405 mm
177 mm
50 mm
5.3 kg / 11.66 lbs
Confidential - Do Not Copy
ViewSonic Corporation
6
VG710b/s-1
Ergonomics
Tilt Up
Tilt Down
20 DEGREES MINIMUM
-5 degrees
8. Environmental
Environmental Conditions
Operating Temperature
Storage Temperature
Operating Relative Humidity
Storage Relative Humidity
Operating Altitude
Storage Altitude
0°C to +40°C
-20°C to +60°C
20% to 80% RH Non-Condensing
5% to 90% RH Non-Condensing
0 to +3,000 meters
0 to +12,000 meters
Confidential - Do Not Copy
ViewSonic Corporation
7
VG710b/s-1
3. Front Panel Function Control Description
1. Control Location
Use the buttons on the front control panel to display and adjust the On View controls which display on the screen.
Scrolls through menu options and
adjusts the displayed control.
Also a shortcut to display the
Contrast/Brightness adjustment control
screen.
Displays the Main Menu
or exits the control screen
and saves adjustments
Displays the control screen for
the highlighted control.
Decreases or increases
volume
Also toggles between two
controls on some screens.
Also a shortcut to toggle
between analog and digital
connections.
Power light
Green = ON
Orange = Power Saving
Audio Mute button
turns the sound off.
Power
On/Off
2. OSD Menu Controls
Select the menu items shown below by using the up [▲] and down [▼] buttons.
Confidential - Do Not Copy
ViewSonic Corporation
8
VG710b/s-1
Main Menu:
Auto Image Adjust -- adjusts sizes and centers the screen image automatically.
Contrast -- adjusts the difference between the image background (black level) and the foreground (white level).
Brightness -- adjusts background black level of the screen image.
Input Select -- toggles between inputs if you have more than one computer.
Color Adjust -- provides several color adjustment modes: preset color temperatures and RGB, which allow you to adjust
red (R), green (G), and blue (B) separately. The factory setting for this product is 6500K (6500 Kelvin).
Memory Recall -- returns the adjustments back to factory settings if the display is operating in a factory Preset Timing
Mode listed in the Specifications of this manual.
Manual Image Adjust:
H. Size (Horizontal Size) -- adjusts the width of the screen image.
H./V. Position (Horizontal/Vertical Position) -- moves the screen image left or right and up or down.
Fine Tune -- sharpens the focus by aligning the text and/or graphic characters.
NOTE: Try Auto Image Adjust first.
Sharpness -- adjusts the clarity and focus of the screen image.
Confidential - Do Not Copy
ViewSonic Corporation
9
VG710b/s-1
Setup Menu:
Language -- allows you to choose the language used in the menus and control screens.
Resolution Notice -- allows you to enable or disable the resolution notice.
OSD Position -- allows you to move the on-screen display menus and control screens.
OSD Timeout -- sets the length of time the on-screen display screen is displayed. For example, with a “30 second ”
setting, if a control is not pushed within 30 seconds, the display screen disappears.
OSD Background On/Off -- allows you to turn the On-Screen Display background On or Off.
3. Hot Keys for Function Controls
Buttons:
[Up] + [Down] arrows
[Volume-] + [Volume+]
[1] + [2]
[1] + [Up] + [Down]
[1] + [Down] (hold for 10 seconds)
[1] + [Up] (hold for 10 seconds)
[Up] + [Down] + [Power On] with signal
(hold for 3 seconds)
[Up] + [Down] + [Power On]
without signal
(hold for 3 seconds)
Functions:
recall Contrast or Brightness while in the Contrast
or Brightness adjustment, or recall both of Contrast
and Brightness when the OSD is not on.
recall volume to 50% while in volume adjustment,
or when OSD is not on.
toggle 720x400 and 640x400 mode when input
720x400 or 640x400 mode.
White Balance. White Balance should set the screen
on the pure black and white pattern with
640*480@60Hz resolution.
Power Lock (Unlock). User won’t be able to turn off
the monitor.
OSD Lock (Unlock). It will lock all functions,
including “Volume” and “Mute”.
All Mode Reset. It will erase all end users’ settings
and restore the factory defaults.
Burn in Mode. After entering Burn in Mode, press
[1] button, you can find the information about this
monitor.
Confidential - Do Not Copy
ViewSonic Corporation
10
VG710b/s-1
4. Circuit Description
1. Power supply (DC/DC Converter)
The AP1501 is monolithic IC designed for M/B DC/DC converter, with the ability of driving a 3A load without any
additional transistor component.
The AP1501 operates at a switching frequency of 150 kHz and thus allows smaller-sized filter components than
would be needed with lower frequency switch regulator.
2. Flash Memory
The Pm39LV010R is a 1 Megabit, 3.3 Volt-only Flash Memory organized as 131,072 bytes of 8 bits each. This device is
designed to use a 3.0 Volt to 3.6 Volt power supply to perform in-system programming.
The 1 Megabit memory array is divided into thirty-two uniform blocks of 4 Kbytes each for data and/or code storage.
The block architecture allows users to flexibly make chip erase or block erase operation. The block erase feature allows a
particular block to be erased and reprogrammed without affecting the data in other blocks. After the device performs chip
erase or block erase operation, it can be reprogrammed on a byte-by-byte basis.
Confidential - Do Not Copy
ViewSonic Corporation
11
VG710b/s-1
3. GM5120
The gm5110/20 is a graphic processing IC for Liquid Crystal Display (LCD) monitors at XGA/SXGA resolution. It
provides all key IC functions required for the highest quality LCD monitors. On-chip functions include a high-speed
triple-ADC and PLL, Ultra-Reliable DVI TM receiver, a high quality zoom and shrink scaling engine, an on-screen display
(OSD) controller, digital color controls and an on-chip microcontroller (OCM). With this level of integration, the
gm5110/20 devices simplify and reduce the cost of LCD monitors while maintaining a high-degree of flexibility and
quality.
gm5110/5120 System Design Example
4. LVDS (THC63LVDM83A)
The THC63LVDM83A transmitter converts 28 bits of CMOS/TTL data into LVDS (Low Voltage Differential Signaling)
data stream. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. The
HC63LVDM83A can be programmed for rising edge or falling edge clocks through a dedicated pin. The THC63LVDF84A
receiver converts the LVDS data streams back into 28 bits of CMOS/TTL data with falling edge clock. At a transmit clock
frequency of 85MHz, 24 bits of RGB data and 4 bits of LCD timing and control data (HSYNC, VSYNC, CNTL1, CNTL2)
are transmitted at a rate of 595 Mbps per LVDS data channel.
Confidential - Do Not Copy
ViewSonic Corporation
12
VG710b/s-1
5. Adjusting Procedure
1. Function Test
1.1 Product

- 17” LCD Monitor
1.2 Test Equipment
- Color Video Signal & Pattern (or PC with SXGA resolution and a sound card)
1.3 Test Condition
Before function test and alignment, each LCD Monitor should be warmed up for at least 30 minutes with the
following conditions:
(a) In room temperature,
(b) With full-white screen, RGB, and Black
(c) With cycled display modes,
640*480 (H=43.27kHz, V=85Hz)
800*600 (H=53.7kHz, V=85Hz)
1024*768 (H=68.67kHz, V=85Hz)
1280*1024 (H=79.97kHz, V=75Hz)
1.4 Test Display Modes & Pattern
1.4.1 Compatible Modes
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Analog
640 x 350 @ 70Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 67Hz, 35.0kHz
640 x 480 @ 75Hz, 37.5kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 85Hz, 43.27kHz
720 x 400 @ 70Hz, 31.5kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
800 x 600 @ 85Hz, 53.7kHz
832 x 624 @ 75Hz, 49.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1024 x 768 @ 85Hz, 68.67kHz
1280 x 1024 @ 60Hz, 63.4kHz
1280 x 1024 @ 75Hz, 79.97kHz
Digital
640 x 350 @ 70Hz, 31.5kHz
640 x 400 @ 60Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 75Hz, 37.5kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 85Hz, 43.27kHz
720 x 400 @ 70Hz, 31.5kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
800 x 600 @ 85Hz, 53.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1024 x 768 @ 85Hz, 68.67kHz
1280 x 1024 @ 60Hz, 63.4kHz
Confidential - Do Not Copy
ViewSonic Corporation
13
VG710b/s-1
1.4.2 Function Test Display Pattern
Item
Test Content
1 Frequency & Tracking
2 Contrast/Brightness
3
4
5
6
7
Pattern
Fine Line Moire
16 Gray Scale
Specification
Eliminate visual wavy noise.
16 gray levels should be
distinguishable.
Boundary
Horizontal & Vertical
Horizontal and Vertical position of
Thickness
video should be adjustable to be
within the screen frame.
RGB Color Performance
RGB Color Intensities
Contrast of each R, G, B, color
should be normal.
Screen Uniformity & Flicker Full White
Should be compliant with the spec.
Dead Pixel/Line
White Screen & Dark Screen The numbers of dead pixels should
be compliant with the spec.
White Balance
White & Black Pattern
The screen must have the pure white
and black pattern, no other color.
Fine Line Morie Pattern (Figure1)
Horizontal & Vertical Thickness Pattern (Figure 3)
Remark
Figure 1
Figure 2
Figure 3
Figure 4, 5, 6
Figure 7
Figure 7, 8
Figure 9
Gray Scale Pattern (Figure2)
R. Color Pattern (Figure 4)
Confidential - Do Not Copy
ViewSonic Corporation
14
VG710b/s-1
G. Color Pattern (Figure5)
B. Color Pattern (Figure 6)
Full White Pattern (Figure 7)
Dark Screen Pattern (Figure 8)
Black-White Pattern (Figure 9)
Confidential - Do Not Copy
ViewSonic Corporation
15
VG710b/s-1
1.5 Function Test and Alignment Procedure
1.5.1 All Modes Reset
You should do “All Mode Reset” (Refer to Chapter III-3. Hot Keys for Function Controls) first. This action will allow you
to erase all end-user’s settings and restore the factory defaults.
1.5.2 Auto Image Adjust
Please select and enter “Auto Image Adjust” function on Main Menu to see if it is workable. The “Auto Image Adjust”
function is aimed to offer a better screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each
function manually.
1.5.3 Firmware
Test Pattern: Burn In Mode (Refer to Chapter III-3. Hot Keys for Function Controls)
- Make sure the F/W is the latest version.
1.5.4 DDC
Test Pattern: EDID program
- Make sure it can pass test program.
1.5.5 Fine Tune and Sharpness
Test Signal: 1280*1024@60Hz
Test Pattern: Line Moire Pattern
- Check and see if the image has noise and focus performs well. Eliminate visual line bar.
- If not, readjust by the following steps:
(a) Select and enter “Fine Tune” function on “Manual Image Adjust” to adjust the image to eliminate visual wavy noise.
(b) Then, select and enter “Sharpness” function to adjust the clarity and focus of the screen image.
1.5.6 Boundary
Test Signal: 1280*1024@60Hz
Test Pattern: Horizontal & Vertical Line Thickness Pattern
- Check and see if the image boundary is within the screen frame.
- If not, readjust by the following steps:
(a) Select and enter “Manual Image Adjust” function on OSD Main Menu.
(b) Then, select and enter “Horizontal Size” or “Horizontal/Vertical Position” function to adjust the video boundary to
be full scanned and within screen frame.
1.5.7 White Balance
Test Signal: 640*480@60Hz
Test Pattern: White and Black Pattern
Confidential - Do Not Copy
ViewSonic Corporation
16
VG710b/s-1
1.5.8 R, G, B, Colors Contrast
Test Signal: 1280*1024@60Hz
Test Pattern: R, G, B, Color Intensities Pattern and 16 Gray Scale Pattern
- Check and see if each color is normal and distinguishable.
- If not, please return the unit to repair area.
1.5.9 Screen Uniformity and Flicker
Test Signal: 1280*1024@60Hz
Test Pattern: Full White Pattern
- Check and see if it is in normal condition.
1.5.10 Dead Pixel and Line
Test Signal: 1280*1024@60Hz
Test Pattern: Dark and White Screen Pattern
- Check and see if there are dead pixels on LCD panel with shadow gauge and filter film.
- The total numbers and distance of dead pixels should be compliant with the spec.
1.5.11 Mura
Test Pattern: White, RGB, Black, & Grey
Test Tool: 10% ND Filter
- Check if the Mura can pass 10% ND Filter.
1.5.12 Audio
Test Signal: Voice signal (optional, depend on model)
Test Pattern: liberty
- Make sure there is audio output.
- Make sure that audio function (volume≦80%) is working without noise and resonance.
- Make sure that the sound of right and left speakers are in balance.
1.5.13 Check for Secondary Display Modes
Test Signal:
Analog: 640*350@70Hz; 640*480@60/67/72/75/85Hz;
720*400@70Hz; 800*600@56/60/72/75/85Hz;
832*624@75Hz, 1024*768@60/70/72/75/85Hz;
1280*1024@60/75Hz
Digital: 640*350@70Hz; 640*480@60/72/75/85Hz;
720*400@70Hz; 800*600@56/60/72/75/85Hz;
1024*768@60/70/72/75/85Hz; 1152*870@75Hz,
1280*720@60Hz, 1280*1024@60Hz
- Normally when the primary mode 1280*1024@60Hz is well adjusted and compliant with the specification, the
secondary display modes will also be compliant with the spec. But we still have to check with the general test pattern
to make sure every secondary is compliant with the specification.
Confidential - Do Not Copy
ViewSonic Corporation
17
VG710b/s-1
1.5.14 All Modes Reset
After final QC step, we have to erase all saved changes again and restore the factory defaults. You should do “All Mode
Reset” again.
1.5.15 Power Off Monitor
Turn off the monitor by pressing “Power” button.
2. Firmware Upgrade Procedure
When you receive the returned monitor, please check whether the firmware version is the latest.
the following procedures to upgrade it to the latest version.
If not, please do
2.1 Equipment Needed
- VG710 Monitor
- Fixture for Firmware Upgrade
- Power Adapter (P/N: 47.58201.001) *1 for Fixture
- VGA Cable (P/N: 42.59901.003) *1(Pin 4, 11 should be connected to GND)
- PC (Personal Computer)
- LPT Cable (P/N: 42.59906.001) *1
- Firmware Upgrade Program
- One additional monitor for checking the program execution
Printer Port
PC
Fixture
VG710
Confidential - Do Not Copy
ViewSonic Corporation
18
VG710b/s-1
Power Adapter for Fixture
(P/N: 47.58201.001)
LPT Cable
(P/N: 42.59906.001)
VGA Cable
(P/N: 42.59901.003)
2.2 Setup Procedure
2.2.1 Connect P2 of Fixture with printer port of PC by LPT Cable.
2.2.2 Connect P1 of Fixture with VG710 Monitor by VGA Cable.
2.2.3 Plug Power Adapter to Fixture.
2.2.4 Connect Power Cord to VG710 Monitor.
2.2.5 Connect PC to the additional monitor.
JP1: to Power Adapter
P1: to VGA Cable
P2: to LPT Cable
Confidential - Do Not Copy
ViewSonic Corporation
19
VG710b/s-1
2.2.6 Install GProbe Program by selecting and clicking Gprobe icon. Press “Yes” or “Next” buttons until the installation is complete.
Confidential - Do Not Copy
ViewSonic Corporation
20
VG710b/s-1
Confidential - Do Not Copy
ViewSonic Corporation
21
VG710b/s-1
Confidential - Do Not Copy
ViewSonic Corporation
22
VG710b/s-1
2.3 Firmware Upgrade Procedure
Confidential - Do Not Copy
ViewSonic Corporation
23
VG710b/s-1
Step 1. Let VG710 enter Burn In Mode. (Refer to Chapter III-3. Hot Keys for Function Controls).
Step 2. Save these three files<bdisp.txt>, <p204_205.bin> and <710LG_V2_48.bin> in a hard disk (better in a root directory, e.g.
C:\ or D:\ ).
Step 3. Open <bdisp.txt> file. Key in the path where you save the driver <p204_205.bin> and firmware <710LG_V2_48.bin>.
Confidential - Do Not Copy
ViewSonic Corporation
24
VG710b/s-1
Step 4. Execute Gprobe program.
Step 5. Click Connection Setup icon. Select Protocol: DDC 2Bi3, Port: LPT1 (0x378), Speed: 70000.
Confidential - Do Not Copy
ViewSonic Corporation
25
VG710b/s-1
Step 6. Before executing the firmware program, please test the connection between the monitor and fixtures. Key in “test” after
“Gprobe,” and then press “Enter.”
If the test result shows “passed,” it means the connection is well. If not (failed), it means the connection has
problems. Then you need to check the setup procedure or reboot the PC, or simply use another PC to do the
firmware upgrade.
Confidential - Do Not Copy
ViewSonic Corporation
26
VG710b/s-1
Step 7. Key in “batch C:\VG710\bdisp.txt” after “Gprobe:”, and then press “Enter” key to begin programming automatically.
Step 8. The successful picture is as follows:
Confidential - Do Not Copy
ViewSonic Corporation
27
VG710b/s-1
Step 9. Unplug and replug power cord of VG710 and then enter “Burn In Mode” (Refer to Chapter III-3. Hot Keys for Function
Controls). Check if the version of BIOS is correct.
Step 10. At last, do “All Mode Reset.”
Troubleshooting:
1.
If the firmware upgrade fails at the last step, don’t unplug the power cord of the monitor. Just try the upgrade
procedure again.
(a) If there is error to execute the command at or before line10 in the “bdisp.txt” batch file (for instance, the
message “Error executing batch file at line 4” shows up in the Gprobe program (see the following picture)),
please try to upgrade the firmware again.
Confidential - Do Not Copy
ViewSonic Corporation
28
VG710b/s-1
Test failed.
Test failed.
Test failed.
Test failed.
Test failed.
Test failed.
Error executing batch file at line 4.
Execution time: 5.72s
GProbe:>
(b) If there is error to execute the command at or after line11 in the “bdisp.txt” batch file, please copy the error line
of the “bdisp.txt” batch file to “Gprobe:>” in the Gprobe program, and then press “Enter.” For example, there
is “Error executing batch file at line 16” (see the following picture). Then you have to copy line 16
“FLASHWRITE C:\VG710\710LG_V2_48.bin” to “Gprobe:>” in the Gprobe program, and then press “Enter”
(see the picture next page).
Test passed.
Test passed.
Test passed.
Erasing FLASH... Done.
Writing FLASH...
Writing FLASH... FAILED.
Error executing batch file at line 16.
Execution time: 9.61s
GProbe:>
Confidential - Do Not Copy
ViewSonic Corporation
29
VG710b/s-1
Line 16
Copy the error line of the
“bdisp.txt” batch file to
“Gprobe:>”
2.
If the firmware upgrade still fails, reboot the PC, or simply use another PC to upgrade.
3.
If the above procedures don’t work, unplug and re-plug the power cord of the monitor. Then try to upgrade the
Confidential - Do Not Copy
ViewSonic Corporation
30
VG710b/s-1
firmware again if the monitor can be powered on. If the monitor cannot be turned on, that means the flash
memory of the main board is out of work. You then have to replace the main board.
3. DDC Key In Procedure
Note:
1.
Every time after replacing the main board, you have to do the DDC key in.
2.
If you find the DDC does not conform to the monitor, you have to do the DDC key in.
3.1 Equipment Needed
- VG710 Series Monitor
- Fixture (V3) for DDC Key in (JP3 must be closed)
-
RS232 Cable (P/N: 42.55907.001) *1
- VGA Cable (P/N: 42.59901.003) *2
- DVI-DVI Cable *1 (P/N: 42.56108.012)
-
PC (Personal Computer) with Win 98
-
Power Adapter (P/N: 47.56001.501) *1 for Fixture
- DDC Key In Program
- One additional monitor for checking the program execution
JP3 must be closed
COM1:
to
RS232
Cable
PC
RS-232 Cable
(P/N: 42.55907.001)
V3 Fixture
DVI-DVI Cable
32
(P/N: 42.56108.012)
VG710
Power Adapter for Fixture
(P/N: 47.56001.501)
Confidential - Do Not Copy
ViewSonic Corporation
31
VG710b/s-1
Barcode Reader
VGA Cable (P/N: 42.59901.003)
3.2 Setup Procedure
3.2.1 Connect P2 and P4 of Fixture with VGA ports of VG710 by VGA Cable.
3.2.2 Connect P3 of Fixture with DVI port of VG710 by DVI-DVI Cable.
3.2.3 Connect P1 of Fixture with COM1 of PC by RS-232 Cable.
3.2.4 Plug Power Adapter to Fixture.
3.2.5 Connect Power Cord to VG710 Monitor.
3.2.6 Connect PC to the additional monitor.
P3: to DVI-DVI Cable
P2: to VGA Cable
JP3 must be closed
P1: to RS232 Cable
JP1: to Power
Adapter
3.3 DDC Key In Procedure
Confidential - Do Not Copy
ViewSonic Corporation
32
VG710b/s-1
Step 1. Select and execute DDC Key In program.
Step 2. Select “W/w - writing mode.”
Confidential - Do Not Copy
ViewSonic Corporation
33
VG710b/s-1
Step 3. Key in the serial number or use the barcode reader to scan the barcode of the monitor, and then press “Enter” key.
Step 4. The successful picture is as follows. “The checksum values will appear after DDC is upgraded successfully in both VGA
and DFP (DVI) modes.”
Confidential - Do Not Copy
ViewSonic Corporation
34
VG710b/s-1
Step 5. Let VG710 enter “Burn In Mode” (Refer to Chapter III-3. Hot Keys for Function Controls). Unplug and re-plug the
power cord of the monitor. The corrective serial number will show on the screen.
Step 6. Checking Method:
- Execute the DDC Key In program and select “R/r - Reading mode” in Step 2.
- Use barcode reader to scan the barcode of the monitor. If the DDC is correct, the “Send VGA” and “Send DFP” will
show “Check Pass!” message.
Confidential - Do Not Copy
ViewSonic Corporation
35
VG710b/s-1
6. Trouble Shooting Flow Chart
This chapter provides technicians and people who have an electronic background a primary description about maintaining
the product. Moreover, you can get the appropriate operation to solve some complicated problems of component repairing
and professional problems.
1. Equipment Needed
- VG710 Monitor
- Philips Screw Driver #101 and #107
- Electronic Hex Nut M5 mm
- PC (Personal Computer) with SXGA resolution and sound card / Pattern Generator
2. Main Procedure
Confidential - Do Not Copy
ViewSonic Corporation
36
VG710b/s-1
2.1 A. Power Circuit Troubleshooting
2.2 B. Performance Troubleshooting
Confidential - Do Not Copy
ViewSonic Corporation
37
VG710b/s-1
Notice:
1. Make sure VGA cable connected to PC directly, not via anything like “Data transfer” or “Distribution” ……After this
Confidential - Do Not Copy
ViewSonic Corporation
38
VG710b/s-1
action if Ghost image disappears, go to “Yes”; else, go to “No.”
2. Check the compatibility on the computer. If it is compatibility problem, feedback the information to ViewSonic; else, go
to “No.”
2.3 C. Function Troubleshooting
2.4 D. Speakers Troubleshooting
Confidential - Do Not Copy
ViewSonic Corporation
39
VG710b/s-1
7. Recommended Spare Parts List
VG710b Recommended Spare Parts List
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
ViewSonic P/N
M-LB-0813-0781
M-LB-0813-0882
M-MS-0808-8946
M-MS-0808-8947
M-MS-0808-8948
A-CD-VG710B
M-MS-0808-8882
M-MS-0808-8949
M-MS-0808-8950
M-WR-0828-0636
M-WR-0828-6009
M-WR-0828-6010
A-VC-0101-0261
A-AU-0120-0032
B-SB-0221-0565
A-AD-0114-0204
M-LCD-0826-0178
E-SK-0412-0080
M-MS-0808-8797
M-MS-0808-8951
M-MS-0808-8952
M-MS-0808-8299
M-MS-0808-8953
M-MS-0808-8750
M-MS-0808-8954
M-CV-0830-2479
M-MS-0808-8955
M-MS-0808-8956
M-MS-0808-8957
M-MS-0808-8958
M-MS-0808-8959
P-BX-0601-0891
P-FM-0602-0818
P-FM-0602-0819
M-BK-0805-0020
M-BK-0805-0021
M-BK-0805-0022
M-MS-0808-8960
M-MS-0808-8961
C-FP-0301-0932
C-BC-0302-0539
B-MB-0201-0791
B-CB-0206-0165
Ref. P/N
35.61203.001
35.62701.002
35.62702.001
35.62703.001
35.62704.001
36.62701.002
41.55601.001
41.58301.001
41.61603.001
42.58301.001
42.58302.005
42.58303.001
42.59901.003
42.59903.001
44.58402.001
47.62701.001
48.61101.001
49.62701.001
51.00014.002
51.58204.001
51.58314.001
51.58711.002
51.59907.001
51.61103.001
51.62703.002
51.62706.002
51.62707.002
51.62708.002
51.62709.001
52.57503.001
52.62701.002
55.62701.002
56.62701.001
56.62702.001
61.61102.002
61.62701.001
61.62702.001
61.62703.001
61.62704.001
75.62701.002
75.62702.002
80.62701.001
80.62702.001
Description
LABEL BAR CODE 50*25mm VP191
LABEL SPEC 120*50mm VG710b
BIRD LOGO AL E015-006 VG710s
COSMETIC STRIP ADHESIVE CS-VS06 140*21*0.3t
ViewSonic AL-LOGO E015-016-1 ViewSonic
USER GUIDE+CD VG710b
EMI Tape (80773) 20*40mm
EMI TAPE 80773 25*75mm
EMI GASKET 773GT W6*H6.5*L30
W.A. 10/6P UL1007 #24 100mm VG700(INV)
W.A. 30P UL20276 #28 200mm W/O CORE
W.A. 12P UL1571 #28 260mm W/O CORE SHARE(MB/CTRL)
CABLE VGA 15P 1800mm 2*25mm CORE
CABLE AUDIO 1.8M LM/BK/LM VX2000
INVERTER PLCD2417414F;EMAX FOR 17" SAMSUNG
ADAPTER IN100-240V 12V/3.33A;"LSE"
TFT LCD 17" LG LM170E01-A5,SXGA
SPEAKER 3W FOR VG710
FILAMENT TAPE 3M NO.8915 25mm*55M
PE BAG LDPE 420*600*0.07t W/HOLE FOR VG500
LCD PROTECT FILM 355*290*0.1t mm MYLAR VG700/VG750
NAMEPLATE ELLIPSE CS-VS08 ViewSonic
WIRE MOUNT MC-03A "G&A" VX930
MYLAR ADHESIVEt=0.3mm VP171
HINGE CAP ABS HB-VS08 VG710b
BASE COVER ABS HB-VS08 VG710b
FRONT ARM ABS HB-VS08 VG710b
REAR ARM ABS HB-VS08 VG710b
MYLAR ADHESIVE 350*28*0.05t(BLACK) VG710s
RUBBER FOOT 35*10*1.2t TFT8030
VESA RUBBER PAD D7.0*H4.5 VG710b
CARTON AB-18 455*205*480(h) VG710b
CUSHION R EPS VG710s
CUSHION L EPS VG710s
SHIELDING BRKT-INV TINEPLATE 0.3t VG710s
LCD BRKT SECC 1.0t VG710s
SHIELDING BRKT-MB SECC 1.0t VG710s
BASE PLATE SPCC-Zn 2.5t VG710s
HINGE SPCC-Zn 2.0t VG710s
ASSY FRONT COVER CS-VS08 VG710b
ASSY REAR COVER CS-VS08 VG710b
PCBA MAIN BD VG710 "GM5120"
PCBA CTRL BD VG710
Location
BARCODE LABEL
SPEC LABEL
LOGO
COMETIC STRIP
LOGO
USER GUIDE
EMI TAPE
EMI TAPE
EMI TAPE
WIRE
WIRE
WIRE
VGA CABLE
AUDIO CABLE
INVERTER
ADAPTER
LCD PANEL
SPEAKER
FILAMENT TAPE
PE BAG
PROTECT FILM
NAMEPLATE
WIRE MOUNT
MYLAR
HINGE CAP
BASE COVER
FRONT ARM
REAR ARM
MYLAR
RUBBER FOOT
RUBBER PAD
CARTON
RIGHT CUSHION
LEFT CUSHION
SHIELDING BRKT
LCD BRKT
SHIELDING BRKT
BASE PLATE
HINGE SPCC
FRONT COVER
REAR COVER
MAIN BOARD
CONTROL BOARD
Q'ty
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
5
4
1
1
1
1
1
1
1
1
1
1
1
1
VSA-M
Item ViewSonic P/N
1 A-PC-0106-0271
2 A-PC-0106-0270
Ref. P/N
Description
42.50112.001 CABLE POWER CORD 1830mm SP-023+IS14 EUR.
42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Location
POWER CORD
POWER CORD
Q'ty
1
1
VSI-P
Item ViewSonic P/N
1 A-PC-0106-0273
2 A-PC-0106-0270
Ref. P/N
Description
42.58204.001 CABEL POWER CORD 1830mm PC TYPE COLOR:BLACK
42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Location
POWER CORD
POWER CORD
Q'ty
1
1
VSCN-G
Item ViewSonic P/N
1 A-PC-0106-0187
Ref. P/N
Description
42.50126.001 CABLE POWER CORD 1.8M±0.1M (CHINA)
Location
POWER CORD
Q'ty
1
Confidential - Do Not Copy
ViewSonic Corporation
40
VG710b/s-1
VG710s Recommended Spare Parts List
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
ViewSonic P/N
M-LB-0813-0781
M-LB-0813-0888
M-MS-0808-8946
M-MS-0808-8947
M-MS-0808-8948
A-CD-VG710S
M-MS-0808-8882
M-MS-0808-8949
M-MS-0808-8950
M-WR-0828-0636
M-WR-0828-6009
M-WR-0828-6010
A-VC-0101-0261
A-AU-0120-0032
B-SB-0221-0565
A-AD-0114-0204
M-LCD-0826-0178
E-SK-0412-0080
M-MS-0808-8797
M-MS-0808-8951
M-MS-0808-8952
M-MS-0808-8116
M-MS-0808-8953
M-MS-0808-8750
M-MS-0808-8969
M-CV-0830-2780
M-MS-0808-8970
M-MS-0808-8971
M-MS-0808-8957
M-MS-0808-8958
M-MS-0808-8972
P-BX-0601-0895
P-FM-0602-0818
P-FM-0602-0819
M-BK-0805-0020
M-BK-0805-0021
M-BK-0805-0022
M-MS-0808-8960
M-MS-0808-8961
C-FP-0301-0936
C-BC-0302-0540
B-MB-0201-0791
B-CB-0206-0165
Ref. P/N
35.61203.001
35.62701.001
35.62702.001
35.62703.001
35.62704.001
36.62701.001
41.55601.001
41.58301.001
41.61603.001
42.58301.001
42.58302.005
42.58303.001
42.59901.003
42.59903.001
44.58402.001
47.62701.001
48.61101.001
49.62701.001
51.00014.002
51.58204.001
51.58314.001
51.58711.001
51.59907.001
51.61103.001
51.62703.001
51.62706.001
51.62707.001
51.62708.001
51.62709.001
52.57503.001
52.62701.001
55.62701.001
56.62701.001
56.62702.001
61.61102.002
61.62701.001
61.62702.001
61.62703.001
61.62704.001
75.62701.001
75.62702.001
80.62701.001
80.62702.001
Description
LABEL BAR CODE 50*25mm VP191
LABEL SPEC 120*50mm VG710s
BIRD LOGO AL E015-006 VG710s
COSMETIC STRIP ADHESIVE CS-VS06 140*21*0.3t
ViewSonic AL-LOGO E015-016-1 ViewSonic
USER GUIDE+CD VG710s
EMI Tape (80773) 20*40mm
EMI TAPE 80773 25*75mm
EMI GASKET 773GT W6*H6.5*L30
W.A. 10/6P UL1007 #24 100mm VG700(INV)
W.A. 30P UL20276 #28 200mm W/O CORE
W.A. 12P UL1571 #28 260mm W/O CORE SHARE(MB/CTRL)
CABLE VGA 15P 1800mm 2*25mm CORE
CABLE AUDIO 1.8M LM/BK/LM VX2000
INVERTER PLCD2417414F;EMAX FOR 17" SAMSUNG
ADAPTER IN100-240V 12V/3.33A;"LSE"
TFT LCD 17" LG LM170E01-A5,SXGA
SPEAKER 3W FOR VG710
FILAMENT TAPE 3M NO.8915 25mm*55M
PE BAG LDPE 420*600*0.07t W/HOLE FOR VG500
LCD PROTECT FILM 355*290*0.1t mm MYLAR VG700/VG750
NAMEPLATE ELLIPSE ViewSonic
WIRE MOUNT MC-03A "G&A" VX930
MYLAR ADHESIVEt=0.3mm VP171
HINGE CAP ABS HB-VS06 VG710s
BASE COVER ABS HB-VS06 VG710s
FRONT ARM ABS HB-VS06 VG710s
REAR ARM ABS HB-VS06 VG710s
MYLAR ADHESIVE 350*28*0.05t(BLACK) VG710s
RUBBER FOOT 35*10*1.2t TFT8030
VESA RUBBER PAD D7.0*H4.5 VG710s
CARTON AB-18 455*205*480(h) VG710s
CUSHION R EPS VG710s
CUSHION L EPS VG710s
SHIELDING BRKT-INV TINEPLATE 0.3t VG710s
LCD BRKT SECC 1.0t VG710s
SHIELDING BRKT-MB SECC 1.0t VG710s
BASE PLATE SPCC-Zn 2.5t VG710s
HINGE SPCC-Zn 2.0t VG710s
ASSY FRONT COVER CS-VS07A VG710s
ASSY REAR COVER CS-VS06 VG710s
PCBA MAIN BD VG710 "GM5120"
PCBA CTRL BD VG710
Location
BARCODE LABEL
SPEC LABEL
LOGO
COMETIC STRIP
LOGO
USER GUIDE
EMI TAPE
EMI TAPE
EMI TAPE
WIRE
WIRE
WIRE
VGA CABLE
AUDIO CABLE
INVERTER
ADAPTER
LCD PANEL
SPEAKER
FILAMENT TAPE
PE BAG
PROTECT FILM
NAMEPLATE
WIRE MOUNT
MYLAR
HINGE CAP
BASE COVER
FRONT ARM
REAR ARM
MYLAR
RUBBER FOOT
RUBBER PAD
CARTON
RIGHT CUSHION
LEFT CUSHION
SHIELDING BRKT
LCD BRKT
SHIELDING BRKT
BASE PLATE
HINGE SPCC
FRONT COVER
REAR COVER
MAIN BOARD
CONTROL BOARD
Q'ty
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
5
4
1
1
1
1
1
1
1
1
1
1
1
1
VSA-M
Item ViewSonic P/N
1 A-PC-0106-0271
2 A-PC-0106-0270
Ref. P/N
Description
42.50112.001 CABLE POWER CORD 1830mm SP-023+IS14 EUR.
42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Location
POWER CORD
POWER CORD
Q'ty
1
1
VSI-P
Item ViewSonic P/N
1 A-PC-0106-0273
2 A-PC-0106-0270
Ref. P/N
Description
42.58204.001 CABEL POWER CORD 1830mm PC TYPE COLOR:BLACK
42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Location
POWER CORD
POWER CORD
Q'ty
1
1
VSCN-G
Item ViewSonic P/N
1 A-PC-0106-0187
Ref. P/N
Description
42.50126.001 CABLE POWER CORD 1.8M±0.1M (CHINA)
Location
POWER CORD
Q'ty
1
Confidential - Do Not Copy
ViewSonic Corporation
41
VG710b/s-1
VG710b BOM List
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
ViewSonic P/N
M-LB-0813-0882
M-MS-0808-8299
M-MS-0808-8954
C-FP-0301-0932
C-BC-0302-0539
M-CV-0830-2479
M-MS-0808-8955
M-MS-0808-8956
A-CD-VG710B
P-BX-0601-0891
Ref. P/N
DC.62701.003
35.62701.002
51.58711.002
51.62703.002
52.62701.002
70.62701.003
75.62701.002
51.62701.002
75.62702.002
51.62702.002
70.62702.002
51.62706.002
51.62707.002
51.62708.002
DP.62702.00A
70.627DP.002
36.62701.002
55.62701.002
Description
D.C. VG710b;LG CS-VS08
LABEL SPEC 120*50mm VG710b
NAMEPLATE ELLIPSE CS-VS08 ViewSonic
HINGE CAP ABS HB-VS08 VG710b
VESA RUBBER PAD VG710b
ASSY DISPLAY CS-VS08 VG710b
ASSY FRONT COVER CS-VS08 VG710b
FRONT COVER ABS HB-VS08A VG710b
ASSY REAR COVER CS-VS08 VG710b
REAR COVER ABS HB-VS08 VG710b
ASSY STAND CS-VS08 VG710b
BASE COVER ABS HB-VS08 VG710b
FRONT ARM ABS HB-VS08 VG710b
REAR ARM ABS HB-VS08 VG710b
D.P. VG710b;LG CS-VS08,USA
COMMON PACKAGE CS-VS08 VG710b
USER GUIDE+CD VG710b
CARTON AB-18 455*205*480(h) VG710b
Location
User Guide
Carton
Q'ty
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
Location
POWER CORD
POWER CORD
Q'ty
1
1
Location
POWER CORD(EUR)
POWER CORD(NA)
Q'ty
1
1
Location
POWER CORD(EUR)
POWER CORD(NA)
Q'ty
1
1
Location
POWER CORD
WARRANTY CARD
Q'ty
1
1
1
1
1
1
Spec Label
Nameplate
Hing Cap
Front cover
Rear Cover
Base Cover
Front Arm
Hng-C.R*4.
VIEWSONIC INDIVIDUAL PARTS OF VSI-P
Item
1
2
ViewSonic P/N
Ref. P/N
A-PC-0106-0273 42.58204.001
A-PC-0106-0271 42.50112.001
Description
CABLE POWER CORD 1830mm PC TYPE C01 OR:BLACK
CABLE POWER CORD 1830mm SP-023+IS14 EUR.
VIEWSONIC INDIVIDUAL PARTS OF VSAU-A
Item
ViewSonic P/N
1 A-PC-0106-0271
2 A-PC-0106-0270
Ref. P/N
42.50112.001
42.57207.001
Description
CABLE POWER CORD 1830mm SP-023+IS14 EUR.
CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
VIEWSONIC INDIVIDUAL PARTS OF VSE-E
Item
1
2
ViewSonic P/N
Ref. P/N
A-PC-0106-0271 42.50112.001
A-PC-0106-0270 42.57207.001
Description
CABLE POWER CORD 1830mm SP-023+IS14 EUR.
CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
VIEWSONIC INDIVIDUAL PARTS OF VSCN-G
Item
1
2
3
4
5
6
ViewSonic P/N
A-PC-0106-0187
M-MS-0808-8773
M-LB-0813-0737
M-LB-0813-0739
M-LB-0813-0736
Ref. P/N
42.50126.001
36.58307.002
36.58308.001
36.58309.001
51.58317.001
35.58304.001
Description
CABLE POWER CORD 1.8M+0.1M (CHINA)
WARRANTY CARD S. CHINESE SECOND VERSION VIEWSONIC
WARRANTY STICKER S. CHINESE
SHIPPING WARRANTY STICKER S. CHINESE VIEWSONIC
PE BAG FOR CARTON
Bar Code
WARRANTY STICKER
SHIPPING STICKER
PE BAG
Bar Code
Confidential - Do Not Copy
ViewSonic Corporation
42
VG710b/s-1
VG710s BOM List
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
ViewSonic P/N
Ref. P/N
DC.62701.002
35.00010.002
35.58304.001
35.61203.001
35.62701.001
35.62704.001
39.62702.001
47.62701.001
51.58314.001
51.58711.001
51.62703.001
51.62709.001
70.62701.002
35.62702.001
35.62703.001
41.55601.001
41.58301.001
41.61603.001
42.58301.001
42.58302.005
42.58303.001
44.58402.001
48.61101.001
49.62701.001
51.00014.002
51.59907.001
51.61103.001
51.62709.001
52.62701.001
61.61102.002
61.62701.001
61.62702.001
75.62701.001
51.62701.001
51.62704.001
51.62705.001
75.62702.001
51.62702.001
61.00042.001
80.62701.001
00.58401.E01
01.00034.501
Description
D.C. VG710s;LG TWO-TONE
LABEL CAUTION HIGH VOLTAGE 25.4*19mm
LABEL BARCODE 40*14 ViewSonic
LABEL BAR CODE 50*25mm VP191
LABEL SPEC 120*50mm VG710s
ViewSonic AL-LOGO E015-016-1 ViewSonic
DDC RECORDER VG710s/b
ADAPTER IN100-240V 12V/3.33A;"LSE"
LCD PROTECT FILM 355*290*0.1t mm MYLAR VG70
NAMEPLATE ELLIPSE ViewSonic
HINGE CAP ABS HB-VS06 VG710s
MYLAR ADHESIVE 350*30*0.05t(BLACK) VG710s
ASSY DISPLAY LG TWO-TONE VG710s
BIRD LOGO AL E015-006 VG710s
COSMETIC STRIP ADHESIVE CS-VS06 140*21*0.3t
EMI Tape (80773) 20*40mm
EMI TAPE 80773 25*75mm
EMI GASKET 773GT W6*H6.5*L30
W.A. 10/6P UL1007 #24 100mm VG700(INV)
W.A. 30P UL20276 #28 200mm W/O CORE
W.A. 12P UL1571 #28 260mm W/O CORE SHARE(MB
PCBA INVERTER PLCD2417414F;EMAX FOR 17" SAM
TFT LCD 17" LG LM170E01-A5,SXGA
SPEAKER 3W FOR VG710
FILAMENT TAPE 3M NO.8915 25mm*55M
WIRE MOUNT MC-03A "G&A" VX930
MYLAR ADHESIVEt=0.3mm VP171
MYLAR ADHESIVE 350*30*0.05t(BLACK) VG710s
VESA RUBBER PAD D7.0*H4.5 VG710s
SHIELDING BRKT-INV TINEPLATE 0.3t VG710s
LCD BRKT SECC 1.0t VG710s
SHIELDING BRKT-MB SECC 1.0t VG710s
ASSY FRONT COVER CS-VS07A VG710s
FRONT COVER ABS HB-VS07A VG710s
SELECT BUTTON ABS HB-Cr VG710s
LED LENS PMMA VG710s
ASSY REAR COVER CS-VS06 VG710s
REAR COVER ABS HB-VS06 VG710s
LOCK BRKT+CAP SECC 0.8t
PCBA MAIN BD VG710 "GM5120"
BARE PCB L:4 MAIN BD GM5120/GM2120
RES RP 0 5% 1/4W CHIP #1206
43
44
45
46
47
48
49
50
01.00036.502
01.00039.501
01.10136.501
01.10136.502
01.10216.501
01.10236.501
01.10236.502
01.10336.501
RES RP 0 5% 1/16W CHIP #0603;"TA-I TECHNOLO
RES RP 0 5% 1/10W CHIP #0805
RES RP 100 5% 1/16W #0603
RES RP 100 5% 1/16W X4 V8V 8P SMD
RES RP 1K 1% 1/16W CHIP #0603
RES RP 1K 5% 1/16W x4 V8V 8P SMD "PANAS
RES RP 1K 5% 1/16W #0603;"TA-I TECHNOLOGY"
RES RP 10K 5% 1/16W x4 V8V 8P SMD "PANASO
51
52
53
54
55
56
57
01.10336.502
01.10339.501
01.10436.501
01.20116.501
01.22036.501
01.22236.501
01.33036.501
RES RP 10K 5% 1/16W CHIP #0603;"TA-I TECHNO
RES RP 10K 5% 1/10W CHIP #0805
RES RP 100K 5% 1/16W CHIP #0603
RES RP 200 1% 1/16W CHIP #0603
RES RP 22 5% 1/16W CHIP #0603
RES RP 2.2K 5% 1/16W CHIP #0603
RES RP 33 5% 1/16W x4 V8V 8P SMD "PANASON
58
59
60
61
62
63
64
01.33036.502
01.33116.501
01.33336.501
01.47236.501
01.56236.501
01.68036.501
01.68336.501
RES RP 33 5% 1/16W CHIP #0603;"TA-I TECHNOL
RES RP 330 1% 1/16W CHIP #0603
RES RP 33K 5% 1/16W CHIP #0603
RES RP 4.7K 5% 1/16W CHIP #0603
RES RP 5.6K 5% 1/16W CHIP #0603
RES RP 68 5% 1/16W CHIP #0603
RES RP 68K 5% 1/16W CHIP 0603
M-LB-0813-0736
M-LB-0813-0781
M-LB-0813-0888
M-MS-0808-8948
A-AD-0114-0204
M-MS-0808-8952
M-MS-0808-8116
M-MS-0808-8969
M-MS-0808-8957
M-MS-0808-8946
M-MS-0808-8947
M-MS-0808-8882
M-MS-0808-8949
M-MS-0808-8950
M-WR-0828-0636
M-WR-0828-6009
M-WR-0828-6010
B-SB-0221-0565
M-LCD-0826-0178
E-SK-0412-0080
M-MS-0808-8797
M-MS-0808-8953
M-MS-0808-8750
M-MS-0808-8957
M-MS-0808-8972
M-BK-0805-0020
M-BK-0805-0021
M-BK-0805-0022
C-FP-0301-0936
C-FP-0301-0937
PL-BT-0706-0149
M-MS-0808-8973
C-BC-0302-0540
C-BC-0302-0541
M-BK-0805-0023
B-MB-0201-0791
Location
CAUTION LABEL
BAR CODE LABEL
BAR CODE LABEL
SPEC LABEL
BIRD LOGO
ADAPTER
NAMEPLATE
BIRD LOGO
INVERTER WIRE
PANEL WIRE
CONTROL WIRE
PANEL
SPEAKER
FRONT COVER
REAR COVER
Main Board
R101.
R51,R54,
R6,
R66,R67,
R68,
R85,R88,
R95,
R98,
R100, R105, R116, R117.
R110. R15,
R16,
R37,
R38,R42,
RP15, RP16. RP5,RP6,
RP7,
R55.
RP3,
RP4.
C13,
R5,
R75,
R77.
RP1,
RP2.
R119, R12,
R121. R17,
R32,R49,
R50,
R56,R57,
R58,
R1,
R2.
R10.
R9,
R7.
R18,
R20,
R22.
R82,
RP17.
R124, R125, R126. R40,
R41,R52,
R53,
R28,
R29,
R3,
R4.
R8,
R80.
R13,
R14.
R72.
R45.
R76.
Confidential - Do Not Copy
ViewSonic Corporation
43
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
0.001
5
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
14
4
6
12
1
2
4
2
16
2
2
1
3
7
1
7
5
1
2
1
1
1
VG710b/s-1
Item
65
66
67
68
ViewSonic P/N
Ref. P/N
01.75016.501
01.75116.501
01.78216.501
02.10075.402
Description
RES RP 75 1% 1/16W CHIP #0603;"TA-I TECHNOL
RES RP 750 1% 1/16W CHIP #0603
RES RP 7.87K 1% 1/16W CHIP #0603
CAP CE 10u 25V 20% 5*11mm 105 DEGREE C (PZ)
69
70
71
02.10174.404
02.10273.404
02.10274.403
CAP CE 100u 20% 16V 6.3*11 RADIAL 105 degre
CAP CE 1000u 10V 20% 10*16mm 105 ℃ (HF) LOW
CAP CE 1000u 16V 20% 10*20mm 105 ℃ (HD) LOW
72
73
02.10547.102
02.10747.101
CAP CC 100pF 5% 50V NPO #0603
CAP CC 0.01uF 10% 50V X7R #0603;"YCTC""TEAM
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102 E-IC-0401-2771
103
104
105
106
107
108
109
110
111
112
113
114
02.10887.101
00.62701.A01
02.10987.101
02.12174.401
02.22447.101
02.33575.101
02.50347.101
03.00052.401
03.00072.401
03.00127.401
03.15100.301
03.22040.301
07.14318.001
08.2N390.402
08.2N390.603
09.1N414.802
09.1N582.201
09.DAN20.2K1
09.LTL1B.ED1
11.035F1.301
11.042M2.306
11.059F2.014
11.102M2.303
11.122M2.302
11.122M2.303
11.155F2.203
11.259F2.203
11.302M2.301
20.24LC2.1A1
20.74LVC.141
20.AIC10.842
20.AN752.201
20.AP150.101
20.GM512.001
20.SI230.4D1
20.THC63.LV1
21.24LC1.601
21.Pm39L.V01
22.62701.001
35.00016.001
35.00017.001
CAP CC 0.1uF +80%-20% 50V Y5V #0603; "YCTC"
BARE PCB L:2 CTRL BD VG710
CAP CC 1uF +80%-20% 16V Y5V #0603
CAP CE 120µF 20% 16V LOW-ESR TYPE RC=405mA
CAP CC 22pF 5% 50V NPO #0603; "YCTC","TEAM
CAP CC 330pF 8P4C 20% 25V #1206 "INPAQ"
CAP CC 5pF 5% 50V NPO X7R #0603
INDCTOR BEAD MLB-160808-0600A-N1 SMD ; "MAG
EMI Bead MLB-201209-0300A-N1
INDCTR BEAD #0805 100MHz 30R MLB201209-0030
INDCTR CHOKE 150uH 20% 3A DIP A0060D1 "ARON
INDCTR CHOKE COIL 22u 10% 3A DIP A00601C2 "
XTAL 14.318MHz HC-49S HALF SIZE "鴻星"
TRNSTR NPN GENERAL MMBT3904LT1 SOT-23 "MO
TRANSTR PNP GENERAL PURPOSE 2N3906 SST3 "RO
DIODE RLS4148 / PMLL4148L SMD "PHILIPS"
DIODE IN5822 SCHOTTKY RECTIFIER DO201AD
DIODE ARRAY DAN202K SMD; "ROHM"
DIODE LED 3mm Yellow/Green LTL-1BEDJ
CNNT F3P PWR JACK 2.54mm DIP 2DC-S005D100
CNNT M 4P 2mm RT/LEAD TU2001WNR-04 "TYU"
CNNT PHONE JACK 5P ST/LEAD A71-5AYLT1 LIME(
CNNT 10P 2.0mm TU2001WNR-10 RT/DIP;"TYU"
CNNT M 12P 2mm RT/LEAD P-220-2*6-R
CNNT 12P 2.0mm TU2001WNR-12 RT/DIP;"TYU"
CNNT D-SUB 15P RT/LEAD BLUE PC99 VGA
CNNT DVI-D 25P RT/LEAD AMPHENOL G12A2031
CNNT M 30P 2mm RT/LEAD P220-2*15-R ;"LCU"
IC CMOS 24LC21A EEPROM 128*8 BIT 8SOIC
IC CMOS 74LVC14 INNERT SCHMITT-TR 14SOIC ;
IC AIC1084:(TO252) 5A ADJUSTABLE REGULATOR
IC AUDIO AN7522 DUAL 3-W AMPLIFIER
IC AP1501 5V SWITCHING REGULATOR SMD 150KHz
IC GM5120 Dual-Interface SXGA 208P PQFP "GE
IC NMOS SI2304DS VISHAY SOT-23
IC THC63LVDM83A 85MHZ LVDS TSSOP
IC EEPROM 24LC16B/SN M 2K*8 BIT IIC BUS 8SO
IC Pm39LV010R CMOS Flash memory 1Megabit(12
PROGRAMED IC VG710
LABEL BARCODE 6*38mm BLANK
LABEL BIOS 13*11mm BLANK
Location
R24,
R25, R26.
R11.
R78, R79.
C114. C121, C124,
C100, C118, C12,
C14,
C174,
C19, C22, C25,C77, C9,
C90,C29, C32.
C62,
C27.
C123, C5.
C102, C165, C166, C167, C168,
C186, C187. C89,
C42,C43.
C44, C45,C46,
C11,
C110, C111,C125, C126,
C127,C128, C129, C130, C131,
C132, C133, C134, C136,C137,
C138, C139,C140, C141, C143,
C144, C145, C146, C147,
C148,C149, C150, C151,C152,
C153, C154, C155, C156, C157,
C158, C159,C16, C161,
C162,C169, C171, C172. C175,
C176, C18, C180, C181,C182,
C183, C184,C198, C2,
C202,
C203, C21,C23,
C24, C26,C28,
C3,
C33,C35,
C37, C39,
C40,
C48,C49,
C57, C63,C64,
C65,
C66,C67,
C68, C69,
C7,
C70,C71,
C72, C73,C74,
C78,
C79,C8,
C80,
C81, C82,
C115, C116, C117.
C1.
C20,
C192, C59, C60. C61, C75,C76,
CP13, CP14.
C103, C104.
L20, L21.
L15, L17, L18, L19. L3,
R127, R128, R129.
L4.
L1,
L16, L5,
L9.
X1.
Q2,
Q3.
Q4.
D13.
D1.
D2,
D3.
D1.
JP2.
JP10.
JP9.
JP3.
CON2.
JP7.
JP6.
JP5.
JP11.
U7,
U8.
U6.
U1,
U3.
U12.
U4.
U9.
Q1.
U13,
U14.
U10.
U11.
Confidential - Do Not Copy
ViewSonic Corporation
44
Q'ty
3
1
2
3
14
1
2
8
9
107
1
3
2
6
2
2
2
5
3
1
4
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
2
1
1
1
1
1
VG710b/s-1
Item
115
116
ViewSonic P/N
Ref. P/N
35.00018.001
39.62701.001
Description
LABEL BARCODE 13*26.5mm BLANK
FW BIOS SOURCE CODE VG710
117
118
119
120 B-CB-0206-0165
121 M-MS-0808-6287
43.52102.002
61.00039.001
61.59901.001
80.62702.001
85.005AG.075
SWITCH PUSH PT-002-B2 DC12V 50mA
EYELET BR φ3*4.0
SHIELDING PLATE DVI T-PLATE 0.3t
PCBA CTRL BD VG710
SCREW HEX I/O #4-40*H5*L7.5 Ni NYLOK
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
85.1F123.060
85.4A323.040
85.TA123.080
85.UA123.080
70.62702.001
51.62706.001
51.62707.001
51.62708.001
52.57503.001
61.62703.001
61.62704.001
85.1F124.120
85.4A524.080
85.UA123.080
85.YA123.060
DP.62701.00A
35.59906.001
42.50112.001
42.57207.001
51.00069.001
51.00070.001
51.00080.001
55.55103.001
55.57202.001
55.57503.001
58.62701.001
70.627DP.001
35.58203.001
36.62701.001
42.59901.003
42.59903.001
51.58204.001
55.62701.001
56.62701.001
56.62702.001
SCREW PAN MECH W/SF M3*6 Ni
SCREW FLATE MECH M3*4 BLACK
SCREW CAP TAP M3*8 Ni
DOUBLE THREADS SCREW PAN TAP M3*8 Ni
ASSY STAND CS-VS06 VG710s
BASE COVER ABS HB-VS06 VG710s
FRONT ARM ABS HB-VS06 VG710s
REAR ARM ABS HB-VS06 VG710s
RUBBER FOOT 35*10*1.2t TFT8030
BASE PLATE SPCC-Zn 2.5t VG710s
HINGE SPCC-Zn 2.0t VG710s
SCREW PAN MECH W/SF M4*12 Ni
SCREW FLAT MECH W/O M4*8 NYLOK
DOUBLE THREADS SCREW PAN TAP M3*8 Ni
SCREW FLAT TAP M3*6 Ni
D.P. VG710s;AUO TWO-TONE,NA
LABEL 210*65mm BLANK FOR PALLET
CABLE POWER CORD 1830mm SP-023+IS14 EUR.
CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
PACKING STRAP 12MM*2000M*0.6MM
PE STRETCH FILM 500MM*1500M*0.02MM
3 INCH TRANSPARENT ADHESIVE TAPE (600M)
CORNER BOARD 40*40*5*1050mm
CORNER BOARD 40*40*5*960mm
CORNER BOARD 40*40*5*1700MM
WOOD PALLET 1125*950*130 VG710s
COMMON PACKAGE TWO-TONE VG710s
LABEL CARTON 76*76mm
USER GUIDE+CD VG710s
CABLE VGA 15P 1800mm 2*25mm CORE
CABLE AUDIO 1.8M LM/BK/LM VX2000
PE BAG LDPE 420*600*0.07t W/HOLE FOR VG500
CARTON AB-18 455*205*480(h) VG710s
CUSHION R EPS VG710s
CUSHION L EPS VG710s
M-SCW-0824-0651
M-SCW-0824-6753
M-SCW-0824-6756
M-SCW-0824-6755
M-CV-0830-2480
M-MS-0808-8970
M-MS-0808-8971
M-MS-0808-8958
M-MS-0808-8960
M-MS-0808-8961
M-SCW-0824-6757
M-SCW-0824-6754
M-SCW-0824-6755
M-SCW-0824-0660
A-PC-0106-0271
A-PC-0106-0270
M-LB-0813-0706
A-CD-VG710S
A-VC-0101-0261
A-AU-0120-0032
M-MS-0808-8951
P-BX-0601-0895
P-FM-0602-0818
P-FM-0602-0819
Location
SW1,
SW2,
SW3,
SW4,
SW5,SW6,
SW7,
SW8.
CN1.
CONTROL BOARD
B.L-DVI*2.B.L-VGA*2,
B.L-LCD*4,CTL-B.L*3.E.I-B.L*2,E.MB.L*3,S.I-B.L*3,S.M-B.L*5,
S.M-B.L*2.
spk-c.f*4.
C.F-C.R*2.
Hng-C.R*4.
P.B-Hng*4.
Hng-A.R*1.
P.B-C.B*4.
Confidential - Do Not Copy
ViewSonic Corporation
45
Q'ty
2
1
8
2
1
1
4
20
2
4
2
1
1
1
1
5
1
1
4
4
1
4
1
0.063
1
1
0.023
3E-04
0.002
0.063
0.063
0.125
0.031
1
1
1
1
1
1
1
1
1
VG710b/s-1
VG710s VIEWSONIC INDIVIDUAL PARTS OF VSI-P
Item ViewSonic P/N
Ref. P/N
Description
Location
1 A-PC-0106-0273 42.58204.001 CABLE POWER CORD 1830mm PC TYPE C01 OR:BLACKPOWER CORD
2 A-PC-0106-0271 42.50112.001 CABLE POWER CORD 1830mm SP-023+IS14 EUR.
POWER CORD
Q'ty
1
1
VIEWSONIC INDIVIDUAL PARTS OF VSCN-G
Item
1
2
3
4
5
6
ViewSonic P/N
Ref. P/N
A-PC-0106-0187 42.50126.001
M-MS-0808-8773 36.58307.002
M-LB-0813-0737 36.58308.001
M-LB-0813-0739 36.58309.001
51.58317.001
M-LB-0813-0736 35.58304.001
Description
Location
Q'ty
CABLE POWER CORD 1.8M+0.1M (CHINA)
POWER CORD
1
WARRANTY CARD S. CHINESE SECOND VERSION VIE WARRANTY CARD
1
WARRANTY STICKER S. CHINESE
WARRANTY STICKER
1
SHIPPING WARRANTY STICKER S. CHINESE VIEWSONSHIPPING STICKER
1
PE BAG FOR CARTON
PE BAG
1
Bar Code
Bar Code
1
VIEWSONIC INDIVIDUAL PARTS OF VSAU-A
Item ViewSonic P/N
Ref. P/N
Description
1 A-PC-0106-0271 42.50112.001 CABLE POWER CORD 1830mm SP-023+IS14 EUR.
2 A-PC-0106-0270 42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Location
POWER CORD(EUR)
POWER CORD(NA)
Q'ty
1
1
Location
POWER CORD(EUR)
POWER CORD(NA)
Q'ty
1
1
VIEWSONIC INDIVIDUAL PARTS OF VSE-E
Item ViewSonic P/N
Ref. P/N
Description
1 A-PC-0106-0271 42.50112.001 CABLE POWER CORD 1830mm SP-023+IS14 EUR.
2 A-PC-0106-0270 42.57207.001 CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
Confidential - Do Not Copy
ViewSonic Corporation
46
VG710b/s-1
ViewSonic Corporation
8. Exploded Diagram And Spare Parts List
47
Confidential - Do Not Copy
VG710b/s-1
Exploded Parts List
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
ViewSonic P/N
M-MS-0808-8947
M-MS-0808-8948
M-LCD-0826-0178
M-MS-0808-8797
E-SK-0412-0080
M-MS-0808-8953
M-MS-0808-8750
C-FP-0301-0937
C-BC-0302-0541
M-MS-0808-8969
PL-BT-0706-0149
M-MS-0808-8973
M-CV-0830-2780
M-MS-0808-8970
M-MS-0808-8971
M-MS-0808-8957
M-MS-0808-8958
M-BK-0805-0021
M-BK-0805-0022
M-MS-0808-8960
M-MS-0808-8961
B-SB-0221-0565
B-MB-0201-0791
B-CB-0206-0165
M-MS-0808-6287
M-SCW-0824-0651
M-SCW-0824-6757
M-SCW-0824-6753
M-SCW-0824-6754
M-SCW-0824-6755
M-LB-0813-0888
M-SCW-0824-0660
M-MS-0808-8116
M-MS-0808-8972
M-BK-0805-0023
M-BK-0805-0020
M-SCW-0824-6756
M-WR-0828-6009
M-WR-0828-0636
M-WR-0828-6010
Ref. P/N
35.62703.001
35.62704.001
48.61101.001
51.00014.002
49.62701.001
51.59907.001
51.61103.001
51.62701.001
51.62702.001
51.62703.001
51.62704.001
51.62705.001
51.62706.001
51.62707.001
51.62708.001
51.62709.001
52.57503.001
61.62701.001
61.62702.001
61.62703.001
61.62704.001
44.58402.001
80.62701.001
80.62702.001
85.005AG.075
85.1F123.060
85.1F124.120
85.4A323.040
85.4A524.080
85.UA123.080
35.62701.001
85.YA123.060
51.58711.001
52.62701.001
61.00042.001
61.61102.002
85.TA123.080
42.58302.005
42.58301.001
42.58303.001
Description
COSMETIC STRIP ADHESIVE CS-VS06 140*21*0.3t
ViewSonic AL-LOGO E015-016-1 ViewSonic
TFT LCD 17" LG LM170E01-A5,SXGA
FILAMENT TAPE 3M NO.8915 25mm*55M
SPEAKER 3W FOR VG710
WIRE MOUNT MC-03A "G&A" VX930
MYLAR ADHESIVEt=0.3mm VP171
FRONT COVER ABS HB-VS07A VG710s
REAR COVER ABS HB-VS06 VG710s
HINGE CAP ABS HB-VS06 VG710s
SELECT BUTTON ABS HB-Cr VG710s
LED LENS PMMA VG710s
BASE COVER ABS HB-VS06 VG710s
FRONT ARM ABS HB-VS06 VG710s
REAR ARM ABS HB-VS06 VG710s
MYLAR ADHESIVE 350*30*0.05t(BLACK) VG710s
RUBBER FOOT 35*10*1.2t TFT8030
LCD BRKT SECC 1.0t VG710s
SHIELDING BRKT-MB SECC 1.0t VG710s
BASE PLATE SPCC-Zn 2.5t VG710s
HINGE SPCC-Zn 2.0t VG710s
PCBA INVERTER PLCD2417414F;EMAX FOR 17" SAM
PCBA MAIN BD VG710 "GM5120"
PCBA CTRL BD VG710
SCREW HEX I/O #4-40*H5*L7.5 Ni NYLOK
SCREW PAN MECH W/SF M3*6 Ni
SCREW PAN MECH W/SF M4*12 Ni
SCREW FLATE MECH M3*4 BLACK
SCREW FLAT MECH W/O M4*8 NYLOK
DOUBLE THREADS SCREW PAN TAP M3*8 Ni
LABEL SPEC 120*50mm VG710s
SCREW FLAT TAP M3*6 Ni
NAMEPLATE ELLIPSE ViewSonic
VESA RUBBER PAD D7.0*H4.5 VG710s
LOCK BRKT+CAP SECC 0.8t
SHIELDING BRKT-INV TINEPLATE 0.3t VG710s
SCREW CAP TAP M3*8 Ni
W.A. 30P UL20276 #28 200mm W/O CORE
W.A. 10/6P UL1007 #24 100mm VG700(INV)
W.A. 12P UL1571 #28 260mm W/O CORE SHARE(MB
Confidential - Do Not Copy
ViewSonic Corporation
48
Q'TY
1
1
1
0.0011
1
5
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
4
20
4
2
4
3
1
4
1
4
1
1
4
1
1
1
VG710b/s-1
Packing for shipping
VG710 b/s packaging Part List
Item
1
2
3
4
4_1
5
6
7
8
9
9_1
10
11
12
Confidential - Do Not Copy
ViewSonic Corporation
49
VG710b/s-1
ViewSonic P/N
#N/A
P-FM-0602-0818
P-FM-0602-0819
P-BX-0601-0895
P-BX-0601-0891
M-MS-0808-8951
A-AD-0114-0204
A-AU-0120-0032
A-VC-0101-0261
A-CD-VG710S
A-CD-VG710B
M-LB-0813-0706
A-PC-0106-0270
A-PC-0106-0271
Ref. P/N
DC.62701.002
56.62701.001
56.62702.001
55.62701.001
55.62701.002
51.58204.001
47.62701.001
42.59903.001
42.59901.003
36.62701.001
36.62701.002
35.58203.001
42.57207.001
42.50112.001
Description
D.C. VG710s;LG TWO-TONE
CUSHION R EPS VG710s
CUSHION L EPS VG710s
CARTON AB-18 455*205*480(h) VG710s
CARTON AB-18 455*205*480(h) VG710b
PE BAG LDPE 420*600*0.07t W/HOLE FOR VG500
ADAPTER IN100-240V 12V/3.33A;"LSE"
CABLE AUDIO 1.8M LM/BK/LM VX2000
CABLE VGA 15P 1800mm 2*25mm CORE
USER GUIDE+CD VG710s
USER GUIDE+CD VG710b
LABEL CARTON 76*76mm
CABLE POWER CORD 1.8M±0.1M UNSHIELD (NA)
CABLE POWER CORD 1830mm SP-023+IS14 EUR.
Q'TY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Packing For Shipping
1. Packing Procedure
1.1 Paste protection film to protect the monitor. (Figure 1)
1.2 Put the monitor in the PE bag and seal the bag with tape. (Figure 2)
Figure 1
Figure 2
1.3 Put the cushions on the monitor. (Figure 3)
1.4 Place the monitor into the carton and then put all the accessories into the carton. At last, close
the carton and seal it with tape. (Figure 4)
Adapter, VGA Cable, &
Audio Cable
Power Cord
User
Guide
Figure 3
Figure 4
Place User Guide faceup.
Confidential - Do Not Copy
ViewSonic Corporation
50
VG710b/s-1
Disassembly Procedure
1. Disassemble Stand Unit
1.1
Lay VG710 Monitor face down to detach Hinge Cap.
Hinge Cap
1.2
Unscrew four screws to remove Stand Unit.
Stand Unit
1.3
Unscrew eight screws to remove Base Cover, Base Plate, and Hinge.
Base Cover
Hinge
Base Plate
Confidential - Do Not Copy
ViewSonic Corporation
51
VG710b/s-1
1.4
Use a screw driver (-) to lift up Front Arm.
Front Arm
1.5
Uscrew one screw to remove Rear Arm.
Rear Arm
Hinge Assy
Confidential - Do Not Copy
ViewSonic Corporation
52
VG710b/s-1
2. Removing Inverter Board, Main Board, and Speaker Module
2.1
Unscrew 2 screws on the rear side of the monitor. Press four sides of Rear Cover to loosen
the tenons inside, and then the Rear Cover can be removed.
Press four sides of Rear Cover.
Rear Cover
2.2
Unscrew three screws to remove Shielding Cover.
Shielding Cover
Confidential - Do Not Copy
ViewSonic Corporation
53
VG710b/s-1
2.3
Unscrew two screws and disconnect the wires to remove Inverter Board.
Inverter Board
2.4
Unscrew seven screws to remove Shielding Cover.
Shielding Cover
2.5
Unscrew three screws and four hex screws, and disconnect the wires to remove Main
Board. Unscrew four screws to remove speaker module.
Main Board
Speaker Module
Confidential - Do Not Copy
ViewSonic Corporation
54
VG710b/s-1
3. Removing Keypad and LCD Panel
3.1
Press the rim of Front Cover to loosen the tenons inside, and then the Front Cover can be
detached. Unscrew two screws and disconnect a wire to remove Keypad.
Front Cover
Keypad
3.2
Lay Panel Unit facedown and unscrew four screws on its right and left sides.
Confidential - Do Not Copy
ViewSonic Corporation
55
VG710b/s-1
3.3
Detach LCD Bracket from LCD Panel. Remove off the filament tape and disconnect the
wire on the LCD Panel.
LCD Bracket
LCD Panel
Confidential - Do Not Copy
ViewSonic Corporation
56
VG710b/s-1
VG710b/s-1
FLASH MEMO RY
A/D BUS
DDC_II C
DDC
EEPROM
LVDS
DVI
INPUT
RA/GA/BA[0~7]
PANEL
TMDS
DVS/DHS/DEN/DCLK
ASIC
LVDS Singal
LG 17"
RB/GB/BB[0~7]
R/G/B
D_SUB
Confidential - Do Not Copy
Pm39LV010R
AUO 17"
GM512 0
HS/VS
VH
INPUT
DDC_II C
DDC
BLON
EEPROM
INVERTER
EEPROM
24LC16B
57
SCL
SDA
VL
XTAL
VOLUME
14.318MH z
MUT E
R
AUDIO
16 ohm
OUTPUT
Audio
L
16 ohm
AC (100-240V)
(50-60Hz)
ADAPTER
+12V
DPMS
+12V
+12VIN
+5V
+3.3VD
+3.3VA
+2.5V
Title
BLOCK DIAGRAM
Size
Document Number
Rev
GM5120
Date:
Thursday, July 10, 2003
E
Sheet
7
of
7
ViewSonic Corporation
9. Block Diagram
Jack
+2.5VD
VG710b/s-1
U1
AIC1084
+12V
+5VIN
22uH
JP3
2
3
4
0.1uF
0.1uF
C3
C4
0.1uF
0.1uF
120uF/16V
C5
1000uF/16V
R1
R2
C7
C8
10K
10K
0.1uF
0.1uF
BRI
5
6
7
8
9
120uF/16V
C140
ON
R5
1K
3 BRIGHT
+12V
C17
C9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
C2
C141
R114
100uF/16V
C12
0.1uF
100uF/16V
R4
330/1%
C178
C13
C14
NC/100pF
NC/0.1uF
NC/0.1uF
HEADER 10-2.0
NC
+3.3VA
U2
XC6201
100uF/16V
C179
3
+5V
C180
C181
C182
C183
C184
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
VI
3
R113
VO
0
C18
0.1u
2
R6
C16
0.1u
C15
100uF/16V
NC
1
GND
1
2
BNC-2
C11
330/1%
0.1uF
JP2
0
0
0/NC
0
R3
C10
+12V
+12V
R100
R101
R102
R116
VOUT
C19
100uF/16V
3 BLON
L3
+12V
JP15
C171
0.1uF
0.1uF
C17
NC/100pF
NC/0.1uF
NC
1
2
3
4
+3.3VD
U3
AIC1084
4 HEADER
3
+5V
VIN
VOUT
1
GND
C172
C177
+12V
+5V
+5VIN
U4
AP1501
L4
0.1uF
VOS
200/1%
2
0.1uF
C24
C25
0.1uF
100uF/16V
R8
22uH
2
330/1%
4
58
GND
S.S
C21
120uF/16V
VOUT
5
C20
+VIN
100uF/16V
R7
3.3V_MAIN MAX 5A
L6
1
C23
150uH
22uH
3
L5
C22
Confidential - Do Not Copy
1
C1
VIN
+12VIN
L1
1
GND
JP1
2
CIRDIN_4-R
3
+5V
C26
C27
C28
0.1uF
1000uF/10V
0.1uF
C29
100uF/16V
5V_MAIN=2.5A
D1
LESR
C30
IN5822
3.3V_DVDD
+3.3VD
0
L8
BEAD 0805
(GM5120)
C149
C148
0.1uF
0.1uF
+12V
3.3V_AVDD
+12V
NC
100K
G
R9
Q1
SI2302DS
+12V
Power MOSN
C32
C33
+3.3VD
100uF/16V
C31
NC/0.1uF
D
C34
1
2
(GM5120)
0.1uF
U6A
74LVC14
1
R12
10K
C38
NC/0.1uF
L12
S
SOT
23
N
MOSN
2.5V_VDD
5V
+2.5VD
1
C147
0.1uF
0.1uF
100K
1k
3
Power MOSN
NMos
C205
1
C204
C153
C152
0.1uF
0.1uF
L14
2
2 HEADER
2
Q6
2N3904
BEAD /1206
(GM5120)
2.5V_AVDD
BEAD /0805
C155
C154
0.1uF
0.1uF
0.1uF
100uF/10V
3
2
7
C35
Volume- R131
750R
1000uF/10V
PNL_EN
0.1uF
Q5
SI2302DS
JP13
R11
C36
NC/0.1uF
100K
R132
IRF7204
0.1uF
14
R133
+5V
G
VPL
8
7
6
5
R10
100K
3
C150
C37
0.1uF
Close to GM5120
Q2
2N3904
+3.3VD
C39
0.1uF
R112
10K /NC
Title
POWER
Size
Document Number
Rev
E
GM5120
Date:
Thursday, July 10, 2003
Sheet
1
of
6
ViewSonic Corporation
0.1uF
D
D
D
D
2
C144
0.1uF
NC
S
S
G
1
10. Schematic Diagrams
C145
0.1uF
C151
3
NMos
U5
1
2
3
4
L11 NC
C146
BEAD /0805
+5V
22uH
1
L9
L10
SOT
D
23
N
MOSN
L7
S
+5V
2
+3.3VD
3
+3.3VA
BAV70
DVI_5V
DVI Connector
1
DVI-I
RX2RX2+
GND
RX4RX4+
SCL
SDA
VS
RX1RX1+
GND
RX3RX3+
5V
GND
HP
RX0RX0+
GND
RX5RX5+
GND
RXC+
RXCRIN
GIN
BIN
HS
GND
3
SCL_IN1
SDA_IN1
1
2
3
4
5
6
7
8
R108
R109
RX2RX2+
0 /NC
0 /NC
3
3
ISP_SDA
ISP_SCL
3
3
DVI_5V
9
10
11
12
13
14
15
16
RX1RX1+
HOT_PLUG
R15
100
R16
100
R13
R14
4.7K
4.7K
C157
0.1u
0.1u
1
2
3
4
NC
NC
NC
GND
VCC
WP
SCL
SDA
8
7
6
5
DDCSCL1
DDCSDA1
24LC21A
25
26
27
28
29
RX0RX0+
3
3
RXC+
RXC-
3
3
C190
C189
0.1u /NC
0.1u /NC
3
3
3
3
3
3
3
3
3
3
3
3
U7
10K
17
18
19
20
21
22
23
24
MUTE
MENU
SELECT
VOLUME+
DOWN
UP
VOLUMEPWR_SW
LEDG
LEDR
DVI_5V
DSUB
DDCSCL1
DDCSDA1
3
3
DVI_5V
R17
C156
3
3
C40
0.1u
R18
Bead 30R
R127
22
C41
0.01uF
RED+
3
RED-
3
+5V
+5V
+5V
R26
0.1u
0.1u
0.1u
75
R129
0.01uF
GREEN+
3
GREEN-
3
BLUE+
3
BLUE-
3
JP7
R125
Bead 30R
56
R22
C44
0.01uF
C45
22
12
11
10
9
8
7
6
5
4
3
2
1
0.01uF
R24
75
R126
C46
56
0.01uF
KMUTE
KMENU
KSELECT
KVOLUME+
KDOWN
KUP
KVOLUMEKLEDG
KLEDR
5
6
7
8
0.01uF
C43
0.1u
RP1
RP2
10K
10K
RP3
4
3
2
1
4
3
2
1
RP4
KPWR
(KEYPA D)
R27
MUTE
MENU
SELECT
VOLUME+
DOWN
UP
VOLUMEPWR_SW
LEDG
LEDR
5 1K
6
7
8
5 1K
6
7
8
HEADER 12-2.0
C48
C49
R30
R28
100R
R29
100R
R31
CP13
CP14
0.1uF
0.1uF
59
R25
C42
8
7
6
5
C196
22
8
7
6
5
C195
56
R20
4
3
2
1
C194
R124
4
3
2
1
Bead 30R
R128
5
6
7
8
C202
75
+5V
Confidential - Do Not Copy
JP5
+5V
SOT23
2
VG710b/s-1
MUTE
MENU
SELECT
VOLUME+
DOWN
UP
VOLUMEPWR_SW
LEDG
LEDR
DVI_5V
DSUB
D2
NC
D3
BAV70
DSUB_5V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
+5V
1
2
3
4
D_SUB
RIN
GIN
BIN
NC
GND
GND
GND
GND
5V
GND
NC
SDA
HS
VS
SCL
NC
+5V
SOT23
3.3V_DVDD
DSUB
2
ISP_SDA
ISP_SC
SDA_IN2
HS_DSUB
R33
VS_DSUB
R36
SCL_IN2
3
1
R32
UART_D1
DDCSCL2
3
C158
C159
0.1u
0.1u
10K
0
100/NC
ISP_SCL
R34
R35
4.7K
4.7K
UART_D0
DDCSDA2
3
R68
0
R67
0
UART_D0
DDCSCL2
DDCSDA2
ISP_SD
1
2
3
4
SCL_IN2
R123
0
R122
0
3
3
U8
SDA_IN2
ISP_SC
UART_D1
NC
NC
NC
GND
VCC
WP
SCL
SDA
PCB2421A
8
7
6
5
R37
100
R38
100
DDCSCL2
DDCSDA2
C57
3
3
0.1uF
R110
R40
33
3
4
11
U6B
74LVC14
10
U6E
74LVC14
100
VS
3
HS
3
C192
47pF
R42
R41
33
5
R43
R44
C59
C60
2.2K
2.2K
47pF
47pF
6
U6C
74LVC14
9
8
U6D
74LVC14
100
C61
47pF
Title
Size
INPUT CONNECTOR
Document Number
Rev
GM5120
Date:
Thursd ay, July 10, 2003
E
Sheet
2
of
6
ViewSonic Corporation
JP6
NC
1
2
3
4
0.1uF 0.1uF
RIN
GIN
BIN
DSUB_5VISP_SD
3.3V_DVDD
C65
C66
C67
C68
C69
C70
C71
C72
C73
C74
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
C81
C82
C83
C84
C85
C86
C87
C88
C89
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
100pF
100pF on pin-196
100uF/16V
199
2.5V_VDD
2
20
37
53
67
81
97
111
129
PD47/OB7
PD46/OB6
PD45/OB5
PD44/OB4
PD43/OB3
PD42/OB2
PD41/OB1
PD40/OB0
C97
C98
C99
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
2.5V_AVDD
175
178
184
190
197
198
157
158
161
165
169
149
145
140
2.5V_AVDD
3.3V_AVDD
C100
C101
C102
100uF/16V
0.1uF
100pF
3.3V_AVDD
6
C161
C103
0.1uF
5pF
5pF
R95
R46
LVDSON
C104
X1
1
1
0
113
114
TCLK
XTAL
152
151
14.318MHz
2
DVI_5V
2
MUTE
R48
100 /NC
R111
0
R47
2.2K
+5V
VOLUME+
VOLUME-
2
2
ISP_SDA
ISP_SCL.
2
2
DDCSCL1
DDCSDA1
2
2
2
2
2
2
2
2
RED+
REDGREEN+
GREENBLUE+
BLUEHS
VS
2
2
2
2
2
2
2
2
RXC+
RXCRX2+
RX2RX1+
RX1RX0+
RX0-
Bank0
0.1uF
R119
10K
U10
1
2
3
4
A0
A1
A2
GND
VCC
WP
SCL
SDA
8
7
6
5
R49
R50
10K
10K
R52 33
R51
SCL
SDA
24LC16B
SCL
SDA
0
R53 33
R118
/WR
WP
3.3V_DVDD
NC
3.3V_AVDD
R55
RMADDR15
RMADDR14
RMADDR13
RMADDR12
RMADDR11
RMADDR10
RMADDR9
RMADDR8
3.3V_DVDD
0.1uF
10K
R57
3.3V_DVDD
R59
R60
R103
10K
10K
10K /NC
U11
31
30
2
3
29
28
4
25
23
26
27
5
6
7
8
9
10
11
12
Bank0
RMADDR15
RMADDR14
RMADDR13
RMADDR12
RMADDR11
RMADDR10
RMADDR9
RMADDR8
RMADDR7
RMADDR6
RMADDR5
RMADDR4
RMADDR3
RMADDR2
RMADDR1
RMADDR0
RMADDR14
RMADDR9
RMADDR8
RMADDR12
R121
10K
10K
TP6
3.3V_DVDD
3.3V_DVDD
R61
R74
0 /NC
FLASH_OEn
R65
10K
24
22
10K
WE
NC/A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
OE
CE
DQ7
DQ6
DQ5
DQ4
DQ3
DQ2
DQ1
DQ0
21
20
19
18
17
15
14
13
RMDATA7
RMDATA6
RMDATA5
RMDATA4
RMDATA3
RMDATA2
RMDATA1
RMDATA0
3.3V_DVDD
NC
VCC
GND
1
RMDATA[0..7]
R56
5
50
171
170
167
166
163
162
137
136
159
194
195
179
180
185
186
191
192
RMADDR[0..15]
C162
206
207
208
1
205
204
6
7
RESETn
C105
32
16
AT49HF/F010-45JC
1K 174
1%
8
9
10
11
12
13
14
15
RMADDR7
RMADDR6
RMADDR5
RMADDR4
RMADDR3
RMADDR2
RMADDR1
RMADDR0
16
17
18
19
22
23
24
25
RMDATA7
RMDATA6
RMDATA5
RMDATA4
RMDATA3
RMDATA2
RMDATA1
RMDATA0
28
29
30
31
32
33
34
35
ROM_OEn
36
RESETn
3.3V_DVDD
Q4
SST390 6
3
R62
1
2
2
R69
100K
C112
1UF/0805
R73
10K
gm5120
ROM_CE
C110
0.1UF
C111
0.1UF
PD31/OR7
PD30/OR6
PD29/OR5
PD28/OR4
PD27/OR3
PD26/OR2
PD25/OR1
PD24/OR0
PPWR
PBIAS
TCLK
XTAL
PD23/EB7
PD22/EB6
PD21/EB5
PD20/EB4
PD19/EB3
PD18/EB2
PD17/EB1
PD16/EB0
GPIO20
GPIO19
GPIO18
GPIO17
GPIO16/HFSn
GPIO22/HCLK
DDC_SCL
DDC_SDA
PD15/EG7
PD14/EG6
PD13/EG5
PD12/EG4
PD11/EG3
PD10/EG2
PD9/EG1
PD8/EG0
RESETn
GPIO11/ROM_WEn
RED+
REDGREEN+
GREENBLUE+
BLUEHSYNC
VSYNC
ADC_TEST
PD7/ER7
PD6/ER6
PD5/ER5
PD4/ER4
PD3/ER3
PD2/ER2
PD1/ER1
PD0/ER0
RXC+
RXCRX2+
RX2RX1+
RX1RX0+
RX0-
GPO0
GPO1
GPO2
GPO3
GPO4
GPO5
GPO6
GPO7
TCON_RCLK
GPIO10/TCON_ROE3
GPIO9/TCON_ROE2
TCON_ROE
REXT
ROM_ADDR15
ROM_ADDR14
ROM_ADDR13
ROM_ADDR12
ROM_ADDR11
ROM_ADDR10
ROM_ADDR9
ROM_ADDR8
GPIO4/UART_D1
GPIO5/UART_D0
GPIO13/NVRAM_SCL
GPIO12/NVRAM_SDA
GPIO8/IRQINn
GPIO21/IRQn
GPIO7/TCON_TDIV
GPIO6/TCON_SHC
GPIO3/TIMER1
GPIO2/PWM2
GPIO1/PWM1
GPIO0/PWM0
ROM_ADDR7
ROM_ADDR6
ROM_ADDR5
ROM_ADDR4
ROM_ADDR3
ROM_ADDR2
ROM_ADDR1
ROM_ADDR0
ROM_DATA7
ROM_DATA6
ROM_DATA5
ROM_DATA4
ROM_DATA3
ROM_DATA2
ROM_DATA1
ROM_DATA0
ROM_OEn
Int_Test CLKOUT
N/C
N/C
Reserved
Reserved
118
115
116
117
RP17
4
3
2
1
DEN\
DHS\
DVS\
110
109
108
107
106
105
104
103
OB7
OB6
OB5
OB4
OB3
OB2
OB1
OB0
OB[0..7]
102
101
100
99
96
95
94
93
OG7
OG6
OG5
OG4
OG3
OG2
OG1
OG0
OG[0..7]
5
92
91
90
87
86
85
84
83
OR7
OR6
OR5
OR4
OR3
OR2
OR1
OR0
OR[0..7]
5
80
79
78
77
76
75
74
73
EB7
EB6
EB5
EB4
EB3
EB2
EB1
EB0
EB[0..7]
5
72
71
70
69
66
65
64
63
EG7
EG6
EG5
EG4
EG3
EG2
EG1
EG0
EG[0..7]
5
62
61
60
59
58
57
56
55
ER7
ER6
ER5
ER4
ER3
ER2
ER1
ER0
ER[0..7]
5
119
120
121
122
123
124
125
126
127
49
48
128
R54
33
5
6
7
8
DEN
DHS
DVS
5
CP15
22p /NC
ROM_CE
0
R120
NC
LEDR
LEDG
2
2
LVDSON
ADO_CTRL
6
Fujitsu_PD
WP
4
6
0
0.1uF
6
6
6
TP2
TP4
MENU
SELECT
44
45
UART_D1
UART_D0
52
51
39
4
47
46
43
42
41
40
SCL
SDA
2
2
3.3V_DVDD
R58
10K
SCL
SDA
PWR_SW
DSUB
DOWN
UP
DDCSDA2
DDCSCL2
VOLUME
BRIGHT
2
2
2
2
2
4
1
C106
C107
NC
NC
2
201
200
142
132
131
PQFP208
+5V
R66
C108
R72
5.6K
1
C109
0.1UF
0/NC
3.3V_DVDD
Q3
2N3904
D13
1N4148
PD39/OG7
PD38/OG6
PD37/OG5
PD36/OG4
PD35/OG3
PD34/OG2
PD33/OG1
PD32/OG0
0 /NC
PNL_EN
BLON
2
2
AGND_IMB
AGND_RX2
AGND_RX1
AGND_RX0
AGND_RXC
AGND_RXPLL
SGND_ADC
AGND
AGND_ADC
AGND_BLUE
AGND_GREEN
AGND_RED
AVSS_RPLL
AVSS_SDDS
AVSS_DDDS
147
VSS_DPLL
143
VSS_SDDS
138
VSS_DDDS
C96
GND1_ADC
GND2_ADC
GND_RX2
GND_RX1
GND_RX0
C95
156
154
177
183
189
C94
CVSS
CVSS
CVSS
CVSS
CVSS
C93
27
89
133
135
202
C92
RVSS
RVSS
RVSS
RVSS
RVSS
RVSS
RVSS
RVSS
RVSS
100uF/16V
C91
VDD_RXPLL_2.5
3
21
38
54
68
82
98
112
130
C90
22pF
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
148
144
139
203
26
88
134
CVDD_2.5
CVDD_2.5
CVDD_2.5
CVDD_2.5
VDD_DPLL_3.3
VDD_SDDS_3.3
VDD_DDDS_3.3
DCLK
DEN
DHS
DVS
2.5V_AVDD
2.5V_VDD
22pF
6
60
C80
AVDD_DDDS
AVDD_SDDS
AVDD_RPLL
AVDD_IMB
AVDD_RX2
AVDD_RX1
AVDD_RX0
AVDD_RXC
3.3V_A
AVDD_BLUE
AVDD_GREEN
AVDD_RED
AVDD_ADC
C76
4
3
2
1
C79
VDD2_ADC_2.5
VDD1_ADC_2.5
VDD_RX2_2.5
VDD_RX1_2.5
VDD_RX0_2.5
3.3V_AVDD
C78
U9
141
146
150
173
181
187
193
196
164
168
172
160
3.3V_AVDD
153
155
176
182
188
DCLK
3.3V_AVDD
C77
33
C75
Confidential - Do Not Copy
C64
VG710b/s-1
3.3V_DVDD
R45
100uF/16V
C63
JP8
+5V
RXD
TXD
GND
1
2
3
4
UART_D0
UART_D1
UART_D0
UART_D1
2
2
C114
Title
Gensis Chip (Scaler) ASIC
10uF/16V /NC
Size
Document Number
Rev
E
GM5120
Date:
Thu rsday, July 10, 2003
Sheet
3
of
6
ViewSonic Corporation
2.5V_VDD
C62
5
6
7
8
3.3V_DVDD
VG710b/s-1
U12
AN7522
C197
0.1u
1
2
3
4
5
6
7
8
9
10
11
12
+12V
L16
22uH VDO_PWR
C170
C122
C123
1000uF/16V
0.01uF
1000uF/16V
JP1 0
OUT_R+ L15
OUT _R- L17
OUT_L + L18
OUT_L- L19
R75
JP9
AAIN R1
AAINL1
C119
L20
BEAD-600 R7 8 7.87K 1%
L21
BEAD-600 R7 9 7.87K 1%
C120
C164
AUGN D
AUGN D
R96
R97
R105
0.01uF
VOL
ADORI N
C115
1uF
ADOLIN
C116
1uF
R81
R82
2.2K
2.2K
0.01uF
VOLUME
R76
C163
PHO NEJACK
100pF /NC 100pF /NC
4 HE ADER
1K
ADO_CTRL
68K
R77
C117
R80
C118
1uF
33K
100uF/16V
3
1K
C121
10uF/16V
AUGN D
0
0
0
C185
C186
C187
C188
0.1 uF
0.1 uF
0.1 uF
0.1 uF
JP16
AUGN D
AUGN D
NC
AAINL1
AAIN R1
OUT _ROUT_L +
OUT_LOUT_R+
1
2
3
4
5
6
7
8
2*4 (BD/BD)F emale
Titl e
Size
AUDIO
Document Number
Rev
E
GM5120
Date:
Thursday, July 10, 2003
Sheet
4
of
6
ViewSonic Corporation
1
2
3
4
5
1
2
3
4
61
3
BEAD
BEAD
BEAD
BEAD
Confidential - Do Not Copy
+5V
100X4
DRO7
DRO6
DRO5
DRO4
8
7
6
5
OR1
OR0
OR7
OR6
1
2
3
4
DRO7
DRO6
DRO5
DRO4
8
7
6
5
R-PACK4
AUO 17",19" Samsung 17",19" CHI MEI 19"
1
2
3
4
NC
Fujitsu 19"-10
OR3
OR2
OR1
OR0
6
DBE[0..7]
6
1
2
3
4
DGE7
DGE6
DGE5
DGE4
8
7
6
5
NC
RP10
1
2
3
4
100X4
DRO3
DRO2
DRO1
DRO0
8
7
6
5
EG3
EG2
EG1
EG0
1
2
3
4
DGE3
DGE2
DGE1
DGE0
8
7
6
5
4
3
2
1
100X4
4
3
2
1
100X4
EX:RP18~RP29 for 2,3,4,5,6,7,0,1
CP4
Fujitsu 19" FLC48SXC8V-05/-10
EG1
EG0
EG7
EG6
RP9
DBO3
DBO2
DBO1
DBO0
8
7
6
5
6
DGE[0..7]
R-PACK4
RP8
OB3
OB2
OB1
OB0
EX:RP5~RP16 for 0,1,2,3,4,5,6,7
6
DRE[0..7]
CP3
R-PACK4
Select LVDS MAPPIN G
DBE[0..7]
DBO[0..7]
Confidential - Do Not Copy
5
6
7
8
NC
DRE[0..7]
RP26
5
6
7
8
DBO7
DBO6
DBO5
DBO4
DBO[0..7]
DGE[0..7]
CP2
RP22
8
7
6
5
DGE7
DGE6
DGE5
DGE4
8
7
6
5
100X4
CP1
RP18
1
2
3
4
1
2
3
4
100X4
ER[0..7]
OB1
OB0
OB7
OB6
EG7
EG6
EG5
EG4
VG710b/s-1
1
2
3
4
6
CP5
CP6
RP19
DBO3
DBO2
DBO1
DBO0
8
7
6
5
RP23
NC
OR5
OR4
OR3
OR2
1
2
3
4
DRO3
DRO2
DRO1
DRO0
8
7
6
5
NC
R-PACK4
NC
RP27
EG5
EG4
EG3
EG2
5
6
7
8
1
2
3
4
5
6
7
8
OB5
OB4
OB3
OB2
1
2
3
4
8
7
6
5
DGE3
DGE2
DGE1
DGE0
R-PACK4
R-PACK4
1
2
3
4
RP12
DGO7
DGO6
DGO5
DGO4
8
7
6
5
EB7
EB6
EB5
EB4
RP13
1
2
3
4
ER7
ER6
ER5
ER4
4
3
2
1
CP8
CP9
RP24
DGO7
DGO6
DGO5
DGO4
NC
EB1
EB0
EB7
EB6
1
2
3
4
RP28
DBE7
DBE6
DBE5
DBE4
8
7
6
5
NC
5
6
7
8
8
7
6
5
5
6
7
8
1
2
3
4
DRE7
DRE6
DRE5
DRE4
8
7
6
5
100X4
CP7
RP20
OG1
OG0
OG7
OG6
1
2
3
4
100X4
4
3
2
1
100X4
DBE7
DBE6
DBE5
DBE4
8
7
6
5
62
RP11
OG7
OG6
OG5
OG4
ER1
ER0
ER7
ER6
1
2
3
4
DRE7
DRE6
DRE5
DRE4
8
7
6
5
R-PACK4
NC
R-PACK4
R-PACK4
RP14
OG3
OG2
OG1
OG0
1
2
3
4
RP15
DGO3
DGO2
DGO1
DGO0
8
7
6
5
EB3
EB2
EB1
EB0
1
2
3
4
4
3
2
1
NC
R-PACK4
CP12
NC
NC
EB5
EB4
EB3
EB2
1
2
3
4
RP29
8
7
6
5
R-PACK4
DBE3
DBE2
DBE1
DBE0
5
6
7
8
DGO3
DGO2
DGO1
DGO0
5
6
7
8
RP25
8
7
6
5
DRE3
DRE2
DRE1
DRE0
8
7
6
5
CP11
RP21
1
2
3
4
1
2
3
4
100X4
CP10
OG5
OG4
OG3
OG2
ER3
ER2
ER1
ER0
100X4
4
3
2
1
100X4
RP16
DBE3
DBE2
DBE1
DBE0
8
7
6
5
ER5
ER4
ER3
ER2
1
2
3
4
8
7
6
5
DRE3
DRE2
DRE1
DRE0
R-PACK4
Title
OUTPUT INTERFACE
Size
Document Number
Rev
E
GM5120
Date:
Thursday, July 10, 2003
Sheet
5
of
6
ViewSonic Corporation
ER[0..7]
OR7
OR6
OR5
OR4
4
3
2
1
3
EG[0..7]
DBO7
DBO6
DBO5
DBO4
8
7
6
5
6
DGO[0..7]
5
6
7
8
EG[0..7]
1
2
3
4
DRO[0..7]
4
3
2
1
3
EB[0..7]
DGO[0..7]
RP7
5
6
7
8
EB[0..7]
OB7
OB6
OB5
OB4
OR[0..7]
RP6
4
3
2
1
3
RP5
5
6
7
8
OR[0..7]
DRO[0..7]
OG[0..7]
4
3
2
1
3
OB[0..7]
5
6
7
8
OG[0..7]
4
3
2
1
OB[0..7]
3
4
3
2
1
3
VG710b/s-1
+3.3VL
For Fujitst Panel select Lvds mappin g
R98
0
R99
NC
DCLK
C165
C166
100pF
100pF
DCLKA
+3.3VL
DCLKB
+3.3VD
R83
L22
+3.3VL
R84
R85
DRO[0..7]
5
DGO[0..7]
5
DBO[0..7]
5
DRE[0..7]
5
DGE[0..7]
5
DBE[0..7]
C126
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
DRE7
DRE5
DGE0
0.1uF
DGE1
DGE2
DGE6
+3.3VL
C127
DGE7
DGE3
DGE4
0.1uF
DGE5
DBE0
DBE6
+3.3VL
C129
DBE7
DBE1
DBE2
0.1uF
C131
10K
U13
0R
+3.3VL
5
Bead /1206
DBE3
DBE4
DBE5
0.1uF
+3.3VL
DHS
DVS
VCC
TxIN5
TxIN6
TxIN7
GND
TxIN8
TxIN9
TxIN10
VCC
TxIN11
TxIN12
TxIN13
GND
TxIN14
TxIN15
TxIN16
VCC
TxIN17
TxIN18
TxIN19
GND
TxIN20
TxIN21
TxIN22
TxIN23
VCC
TxIN24
TxIN25
C203
TxIN4
TxIN3
TxIN2
GND
TxIN1
TxIN0
TxIN27
LVDSGND
TxOUT0TxOUT0+
TxOUT1TxOUT1+
LVDSVCC
LVDSGND
TxOUT2TxOUT2+
TxCLKOUTTxCLKOUT+
TxOUT3TxOUT3+
LVDSGND
PLLGND
PLLVCC
PLLGND
/PWRDWN
TxCLKIN
TxIN26
GND
DRE4
DRE3
DRE2
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
C132
DRO7
DRO5
DGO0
0.1uF
DGO1
DGO2
DGO6
+3.3VL
C133
DGO7
DGO3
DGO4
0.1uF
DGO5
DBO0
DBO6
+3.3VL
C137
DBO7
DBO1
DBO2
0.1uF
C139
DBO3
DBO4
DBO5
0.1uF
+3.3VL
DHS
DVS
VCC
TxIN5
TxIN6
TxIN7
GND
TxIN8
TxIN9
TxIN10
VCC
TxIN11
TxIN12
TxIN13
GND
TxIN14
TxIN15
TxIN16
VCC
TxIN17
TxIN18
TxIN19
GND
TxIN20
TxIN21
TxIN22
TxIN23
VCC
TxIN24
TxIN25
TxIN4
TxIN3
TxIN2
GND
TxIN1
TxIN0
TxIN27
LVDSGND
TxOUT0TxOUT0+
TxOUT1TxOUT1+
LVDSVCC
LVDSGND
TxOUT2TxOUT2+
TxCLKOUTTxCLKOUT+
TxOUT3TxOUT3+
LVDSGND
PLLGND
PLLVCC
PLLGND
/PWRDWN
TxCLKIN
TxIN26
GND
DS90CF383
+3.3VL
10uF/16V
0.1uF
0.1uF
NC
C128
0.1uF
JP12
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
JP11
C130
0.1uF
DCLKA
DEN
+3.3VL
U14
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
C169
+3.3VL
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
C125
R86
R87
0R
+
DRE1
DRE0
DRE6
3 LVDSON
R88
C124
Vcont
0.1uF
DS90CF383
+3.3VL
Confidential - Do Not Copy
NC
RxEIN0RxEIN0+
RxEIN1RxEIN1+
RxEIN2RxEIN2+
RxECLKINRxECLKIN+
RxEIN3RxEIN3+
RxOIN0RxOIN0+
RxOIN1RxOIN1+
RxOIN2RxOIN2+
RxOCLKINRxOCLKIN+
RxOIN3RxOIN3+
RxEIN0RxEIN0+
RxEIN1RxEIN1+
RxEIN2RxEIN2+
RxECLKINRxECLKIN+
RxEIN3RxEIN3+
RxOIN0RxOIN0+
RxOIN1RxOIN1+
RxOIN2RxOIN2+
RxOCLKINRxOCLKIN+
RxOIN3RxOIN3+
DRO4
DRO3
DRO2
DRO1
DRO0
DRO6
Vcont
Fujitsu_PD
Fujitsu_PD
VPL
+3.3VL
C134
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
DRE1
DRE3
DRE4
DRE6
DGE1
DGE3
DGE4
DGE6
DBE1
DBE3
DBE4
DBE6
DRO1
DRO3
DRO4
DRO6
DGO1
DGO3
DGO4
DGO6
DBO1
DBO3
DBO4
DBO6
DCLKB
DEN
0.1uF
C174
C175
100uF/16V
C176
HEADER 30
C136
0.1uF 0.1uF 0.1uF
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
DRE0
DRE2
DRE5
DRE7
DGE0
DGE2
DGE5
DGE7
DBE0
DBE2
DBE5
DBE7
DRO0
DRO2
DRO5
DRO7
DGO0
DGO2
DGO5
DGO7
DBO0
DBO2
DBO5
DBO7
63
3
DHS
DVS
DEN
DHS
DVS
PLV1
VPL
R89
C135
C171
4.7K
0.1uF
0.1uF 0.1uF
C172
C173
R90
4.7K
C138
0.1uF
R91
DEN
DCLKA
DEN
+3.3VL
Fujitsu_PD
NC
R92
0R
3 LVDSON
C167
C168
100pF
100pF
C170
0.1uF 100uF/16V
Title
LVDS & OUTPUT CONNECTOR
Size
Document Number
Rev
GM5120
Date:
Thursday, July 10, 2003
E
Sheet
6
of
6
ViewSonic Corporation
3
3
3
11. PCB Layout Diagrams
Main Board
CAM350 V 5.0 : Thu Jul 10 11:34:40 2003 - (Untitled)
Confidential - Do Not Copy
ViewSonic Corporation
64
VG710b/s-1
Main Board
CAM350 V 5.0 : Thu Jul 10 11:35:47 2003 - (Untitled)
Control Board
Confidential - Do Not Copy
ViewSonic Corporation
65
VG710b/s-1
*Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual,which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A.What do you think about the content after reading VG710b/s-1 Service Manual?
U nit
Ex cellent
Fair
G ood
Bad
1. Precautions And Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjusting Procedure
6. Trouble Shooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Spare Parts List
9. Block Diagram
10. Schematic Diagrams
11. PCB Layout Diagrams
B.Are you satisfied with the VG710b/s-1 service manual?
It em
Ex cellent
G ood
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C.Do you have any other opinion or suggestion about this service manual?
Reader’s basic data:
Name:
Title:
Company:
Add.:
Fax:
Tel:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
Confidential - Do Not Copy
ViewSonic Corporation
66
VG710b/s-1
Download PDF