LER400B6L & LSR400B6L Series Bilingual Extruded Aluminum Exit Sign

LER400B6L & LSR400B6L Series Bilingual Extruded Aluminum Exit Sign
Project/Location:
LER400B6L &
LSR400B6L Series
Contractor:
Date:
Bilingual Extruded Aluminum
Exit Sign
FEATURES
Supply and install the Lumacell® bilingual LER400B6L or LSR400B6L Series
LED Exit Sign. The equipment shall operate with universal AC input voltage
of 120 to 347VAC at less than 2W and universal two-wire DC input voltage
from 6VDC to 24VDC at less than 3.5W for single and double face signs.
The housing shall be constructed of rugged extruded aluminum and have a
maximum depth of 2-1/2”. The faceplate(s) shall be constructed of extruded
aluminum and come standard with knockout chevrons. The equipment shall
have three (3) canopies that shall fasten for installation in either ceiling- or
wallmount applications. The light source shall be light emitting diodes (LED).
The LED lamps shall provide illumination in normal and emergency operation
and shall be mounted inside the exit housing, not on the face. Red LED
technology shall be ALINGAP An LED-sensitive diffuser shall be mounted
behind the legend to provide the 6” high by 3/4” stroke letters with even
illumination.
The Exit Sign in a Self-Powered configuration shall be equipped with a NickelCadmium battery and shall stay illuminated during emergency operation for at
least 60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
.
The equipment shall be Lumacell® Model:
completely enclosed in acrylic module
•Single LED module lights both single and double face Exit Signs
•Highly energy efficient – consumes less than 5.5W in AC or DC mode
•Normal AC and emergency DC operation – 120/ 277/ 347VAC input; 6
to 24VDC input
•CSA certified, meets or exceeds C860 requirements
DIMENSIONS
Dimensions are approximate and subject to change.
LER400B6L
73/4” [19.7 cm]
83/4” [22.3 cm]
43/4” [11.9 cm]
73/4” [19.7 cm]
Lumacell Model:
TYPICAL SPECIFICATIONS
•Durable extruded, one-piece aluminum housing
•Long-life, energy efficient ALINGAP technology red LED light source
WIRE GUARDS
21/2” [6.3 cm]
29” [73.3 cm]
Prepared by:
460.0059-L
Wall Mount
460.0092-L
Ceiling Mount
73/4” [19.7 cm]
LSR400B6L
29” [73.3 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120 to 347VAC
Less than 2W
6 to 24VDC
AC/ special DC, red
120/277/347VAC
Less than 5W
36 or 48 or 120VDC
Less than 3.5W
Less than 5W
Self-Powered, red
120/347VAC
Less than 5.5W
Nickel-Cadmium battery
Min. 60 minutes
ORDERING INFORMATION
SERIES
LER= exit sortie
6” letters
LSR= sortie exit
6” letters
FACES
450B6L= single face
460B6L= double face
EXAMPLE: LER450B6LC860UNIV
36
www.lumacell.com
APPROVAL
C860
COLOUR
VOLTAGE
Blank= factory white
BA= brushed aluminium
TA= textured aluminium
BK= black
UNIV= 120/277/347VAC, 6 to 24VDC
120VACDC2= 120VAC, 120VDC, 2 wires
UNIV36= 120/277/347VAC, 36VDC, 4 wires
UNIV48= 120/277/347VAC, 48VDC, 4 wires
UNIV120= 120/277/347VAC, 120VDC, 4 wires
SP= 120 to 347VAC, Self-Powered 60 minutes
90= 120 to 347VAC, Self-Powered 90 minutes
120= 120 to 347VAC, Self-Powered 120 minutes
OPTIONS
3C= 3 canopies
VRSTP= vandal resistant shield and
tamper proof screws
TP= tamper proof screws
990.0119-L= tamper proof bit*
* One bit needed per order.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement