AXIOMTEK | IMB203 Series | IMB203 Series Intel Core 2 Quad/Core 2 Duo D ATX

IMB203 Series
®
Intel
™
™
Core 2 Quad/Core 2 Duo D
ATX Industrial Motheroard
User’s Manual
Disclaimers
This manual has been carefully checked and believed to contain
accurate information. AXIOMTEK Co., Ltd. assumes no responsibility
for any infringements of patents or any third party’s rights, and any
liability arising from such use.
AXIOMTEK does not warrant or assume any legal liability or
responsibility for the accuracy, completeness or usefulness of any
information in this document. AXIOMTEK does not make any
commitment to update the information in this manual.
AXIOMTEK reserves the right to change or revise this document
and/or product at any time without notice.
No part of this document may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior
written permission of AXIOMTEK Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is
recommended by the manufacturer that you follow the manufacturer’s
instructions to only replace the same or equivalent type of battery,
and dispose of used ones.
©Copyright 2009 AXIOMTEK Co., Ltd.
All Rights Reserved
August 2009, Version A2
Printed in Taiwan
ii
ESD Precautions
Computer boards have integrated circuits sensitive to static electricity.
To prevent chipsets from electrostatic discharge damage, please take
care of the following jobs with precautions:
„
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
„
Before holding the board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. It
discharges static electricity from your body.
„
Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
®
Windows is a trademark of Microsoft Corporation.
AMI is a trademark of American Megatrend Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International Business
Machines Corporation.
®
TM
TM
Intel Core 2 Quad/ Core 2 Duo are trademarks of Intel
Corporation.
Winbond is a trademark of Winbond Electronics Corp.
Realtek is a trademark of Realtek Semi-Conductor Co., Ltd.
Other brand names and trademarks are the properties and registered
brands of their respective owners.
iii
Table of Contents
Disclaimers ........................................................................................................... ii
ESD Precautions ................................................................................................. iii
CHAPTER 1 INTRODUCTION ..................................................................................... 1
1.1
Specifications .......................................................................................... 2
1.2
Utilities Supported ................................................................................... 4
CHAPTER 2 JUMPERS AND CONNECTORS ............................................................ 5
2.1
Board Dimensions ................................................................................... 5
2.2
Board Layout ........................................................................................... 6
2.3
Jumper Settings ...................................................................................... 7
2.3.1
COM1 Mode Select Jumpers for RS-232/422/485 (JP1/3/4) ........... 7
2.3.2
Audio Amplifier Jumper (JP2)........................................................... 8
2.3.3
CMOS Clear Jumper (JP7) .............................................................. 9
2.3.4
TPM Disable/Enable Jumper (JP9) .................................................. 9
2.3.5
ME Disable/Enable Jumper (JP10) ................................................ 10
2.4
Connectors ............................................................................................ 11
2.4.1
VGA Connector (CN1).................................................................... 13
2.4.2
COM1 Connector (CN2)................................................................. 13
2.4.3
COM2~COM4 Connectors (CN16, CN19, CN25) .......................... 14
2.4.4
Audio Connector (CN3) .................................................................. 14
2.4.5
PS/2 Keyboard/Mouse Connector (CN4) ...................................... 15
2.4.6
Print Port Connector (CN5) ............................................................ 15
2.4.7
USB Port Connector (CN6, CN7) ................................................... 16
2.4.8
USB Connectors (CN27, CN29, CN33, CN45) .............................. 17
2.4.9
ATX 4 Pin 12V In Connector (CN14).............................................. 17
2.4.10
Digital I/O Port (DIO) Connector (CN26) ........................................ 18
2.4.11
CPU Fan Connector (CN31) .......................................................... 18
2.4.12
SATA Connectors (CN36, CN37, CN41, CN42, CN46, CN47) ...... 18
2.4.13
ATX Power Connector (CN50) ....................................................... 20
2.4.14
Front Panel Connector (CN52)....................................................... 21
CHAPTER 3 HARDWARE INSTALLATION .............................................................. 23
3.1
Installing the Processor ......................................................................... 23
3.2
Installing the Memory ............................................................................ 28
CHAPTER 4 HARDWARE DESCRIPTION ................................................................ 29
4.1
Microprocessors .................................................................................... 29
4.2
BIOS...................................................................................................... 29
4.3
System Memory..................................................................................... 29
4.4
I/O Port Address Map............................................................................ 30
4.5
Interrupt Controller (IRQ) Map............................................................... 31
CHAPTER 5 AMI BIOS SETUP UTILITY................................................................... 33
5.1
Starting .................................................................................................. 33
5.2
Navigation Keys .................................................................................... 33
5.3
Main Menu............................................................................................. 35
5.4
Advanced Menu .................................................................................... 36
iv
5.5
5.6
5.7
5.8
5.9
PCI PnP Menu....................................................................................... 52
Boot Menu ............................................................................................. 54
Security Menu ....................................................................................... 58
Chipset Menu ........................................................................................ 59
Exit Menu .............................................................................................. 64
CHPATER 6 INSTALLATION OF DRIVERS.............................................................. 67
6.1
Installing Chipset Driver ........................................................................ 67
6.2
Installing VGA Driver ............................................................................. 71
6.3
Installing LAN Driver.............................................................................. 74
6.4
Installing AUDIO Driver ......................................................................... 78
6.5
Installing iAMT (Active Management Technology) Driver ..................... 80
6.5.1
LMS_SOL Setup ............................................................................ 80
6.5.2
LMS_SOL_IS Setup ....................................................................... 84
6.6
Installing MEI (Management Engine Interface) Driver........................... 88
APPENDIX A WATCHDOG TIMER ........................................................................... 93
APPENDIX B PCI IRQ ROUTING .............................................................................. 95
APPENDIX C CONFIGURING SATA FOR RAID FUNCTION ................................... 97
APPENDIX D iAMT SETTINGS ............................................................................... 111
D.1
Entering MEBx .................................................................................... 111
D.2
Set & Change Password ..................................................................... 112
D.3
D.4
®
Intel iAMT Settings ............................................................................ 114
iAMT Web Console ............................................................................. 119
v
MEMO
vi
IMB203 LGA775 ATX Motherboard User’s Manual
CHAPTER 1
INTRODUCTION
The IMB203 ATX industrial Motherboard supports LGA775 socket for
®
Intel Core™ 2 Quad/Core™ 2 Duo processors with 45/65nm
technology and FSB 800/1066/1333 MT/s. The board integrates
®
Intel Q45 and ICH10/R/DO chipsets (co-layout) that deliver
outstanding system performance through high-bandwidth interfaces,
multiple I/O functions for interactive applications and various
embedded computing solutions. There are four 240-pin DDR3 DIMM
sockets for dual channel DDR3 800/1066, maximum memory capacity
up to 16GB. The board also features Gigabit Ethernet, six serial ATAII ports at maximum transfer rate up to 3Gbs, and SATARAID 0/1/5/10
by ICH10-DO. Twelve USB 2.0 high speed compliant ports and built®
in Intel HD Audio Digital Header can achieve the best stability and
reliability for industrial applications.
Introduction
1
格式化
IMB203 LGA775 ATX Motherboard User’s Manual
1.1
Specifications
CPU
z
®
Intel Core™ 2 Quad / Core™ 2 Duo processors
„
System Chipset
z
®
Intel Q45 and ICH10/R/DO (co-layout)
„
CPU Socket
z
„
LGA775 Socket
Front-Side Bus
z
„
800/1066/1333 MHz
BIOS
z
„
AMI BIOS via SPI interface with socket
z
System Memory
„
Four 240-pin DDR3 DIMM sockets
„
Maximum up to 16GB DDR3 memory
„
Supports DDR3 800/1066 memory
z
L2 Cache
„
Integrated in CPU
z
Onboard Multi-I/O
„
SPP/EPP/ECP supported; with D-Sub connector on the rear
I/O
„
Serial Ports:
COM 1
9-pin D-Sub connector on the rear I/O and supports RS232/422/485 with jumper selectable, RS-485 with auto-flow control
COM 2 2*5-pin 2.54 pitch box-header; supports RS-232
COM 3 2*5-pin 2.54 pitch box-header; supports RS-232
COM 4 2*5-pin 2.54 pitch box-header; supports RS-232
2
Introduction
IMB203 LGA775 ATX Motherboard User’s Manual
z
USB Interface
„
Tweleve USB ports (four on I/O bracket, six ports by 2x5-pin
2.54 pin-header, two ports for 1 USB DoM support with 2x5
2.54 pitch box-header)
z
VGA Controller
®
Chipset -- Intel integrated Graphics Gen5 on Intel Q45
supports 3D, 2D, video capabilities, DX10 and OpenGL 2.1
„
Memory Size -- Intel DVMT supported; preallocated
memory for frame buffer option as 32/48/64/128/256MB,
and 96 MB (0 + 96), 160 MB (64 + 96), 224 MB (128 + 96),
352 MB (256 + 96).
„
Resolution -- Analog output -- the analog port utilizes an
integrated 350MHz RAMDAC that can directly drive a
standard progressive scan analog monitor up to a resolution
of 2048x1536 pixels with 32-bit color at 75 Hz
Analog Output Interface -- CRT from DAC output via 15-pin
D-Sub connector on the edge
„
z
®
„
®
Ethernet
®
„
LAN1 – Intel 82567LM PHY, connected to PCIe x1 port#6;
supports 10/100/1000 Base-T Gigabit Ethernet, RJ-45
connector on the edge; with AMT Gen 5 supported; with 5pin 2.0 pitch wafer for LED
„
LAN2 -- Intel 82574L NIC, connected to PCIe x1 port#5;
supports 10/100/1000 Base-T Gigabit Ethernet, RJ-45
connector on the edge; with 5-pin 2.0 pitch wafer for LED
®
z
Serial ATA
„
Six Serial ATA-II ports (3Gb/s performance) and SATARAID
0/1/5/10 by ICH10-DO
z
Audio
„
HD Audio codec Realtek ALC888 for Line/speaker-out &
MIC-in on the rear I/O double deck connector; with LM1877
audio amplifier
z
Expansion Slot
„
„
1 PCIe (x16) , 4 PCI Slot (32bit/33MHZ)
1 PCIe (x4), 1 PCIe (x1)(Note 1)
Introduction
3
IMB203 LGA775 ATX Motherboard User’s Manual
Watchdog Timer
„
Reset Supported (1-255 levels)
z
NOTE
1. CN18-PCIe (x4) and CN17-PCIe(x1) are software strap, software
strap works only (x4) function or (x1) funciotn. How to choose
PCIe device is as follow(Default:function A):
A. BIOS setting (x4) function, CN18 enable and CN17 disable;
device usage: 1 x4 device (CN18-PCIe (x4)) or 1 x1 (CN18PCIe (x4)) device can work only.
B. BIOS setting (x1) function, CN18 enable and CN17 enable;
device usage: 4 x1 devices (CN18) or 2 x1 devices (CN18PCIe (x4) and CN17-PCIe(x1)) can work only.
1.2
Utilities Supported
®
z
Intel Q45 Utility and Driverss
z
VGA Drivers
Ethernet Utility and Drivers
RAID Utility
z
z
iAMT Utility and Drivers
ITPM Utility
z
z
4
Introduction
IMB203 LGA775 ATX Motherboard User’s Manual
CHAPTER 2
JUMPERS AND CONNECTORS
2.1
Board Dimensions
Jumpers and Connectors
5
格式化
IMB203 LGA775 ATX Motherboard User’s Manual
2.2
6
Board Layout
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.3
Jumper Settings
Proper jumper settings configure the IMB203 to meet your application
purpose.
2.3.1 COM1 Mode Select Jumpers for RS-232/422/485
(JP1, JP3, JP4)
These jumpers select the COM1 port’s communication mode to
operate RS-232 or RS-422/485.
Description Function
COM1
Jumper Setting
RS-232
(Default)
JP1
JP3
JP4
RS-422
JP1
JP3
JP4
RS-485
JP1
JP3
JP4
Jumpers and Connectors
7
IMB203 LGA775 ATX Motherboard User’s Manual
2.3.2 Audio Amplifier Jumper (JP2)
Description
Audio
Amplifier
Function
Jumper Setting
Disable
Enable
(Default)
8
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.3.3 CMOS Clear Jumper (JP7)
You may need to use this jumper is to clear the CMOS memory if
incorrect BIOS settings.
Description
Function
Jumper Setting
CMOS Clear Normal
(Default)
Clear CMOS
2.3.4 TPM Disable/Enable Jumper (JP9)
Description
Function
Jumper Setting
TPM Disable/ Enable TPM
(Default)
Enable
Disabled
Jumpers and Connectors
9
IMB203 LGA775 ATX Motherboard User’s Manual
2.3.5 ME Disable/Enable Jumper (JP10)
Description
ME Disable/
Enable
Function
Jumper Setting
Enable
(Default)
Disable
刪除:
10
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.4
Connectors
Connectors connect this board with other parts of the system. Loose or
improper connection might cause problems. Make sure all connectors
are properly and firmly connected.
Label
Connector
CN1
VGA
CN2
COM 1
CN3
Audio out, Mic in
CN4
Keyboard Mouse
CN5
Print Port
CN6, CN7
USB Ports
CN14
ATX 2x2
CN16
COM 2
CN17
PCI Express x1 Slot
CN18
PCI Express x4 Slot
CN19
COM 3
CN25
COM 4
CN26
DIO
CN27, CN29, CN33, CN45
USB
CN31
FAN
CN36, CN37, CN41,
CN42, CN46, CN47
SATA
CN50
ATX-24Pin
CN52
F_PANEL
Jumpers and Connectors
11
IMB203 LGA775 ATX Motherboard User’s Manual
12
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.1 VGA Connector (CN1)
The board supports CRT/ VGA with a 15-pin D-Sub connector for the
CRT VGA display.
Pin
Signal
Pin
Signal
Pin
1
4
Signal
Red
2
Green
3
Blue
N/A
5
GND
6
GND
7
GND
8
GND
9
VCC
10
GND
11
N/A
12
DDC DATA
13
Horizontal
Sync
14
Vertical Sync
15
DDC CLK
2.4.2 COM1 Connector (CN2)
The board has the onboard serial port COM1 (CN2), a 9-pin D-Sub
connector on the rear I/O to support RS-232/422/485 with jumper
selectable, RS-485 with auto-flow control.
Pin
Signal
1
DCD, Data carrier detect
2
RXD, Receive data
3
TXD, Transmit data
4
DTR, Data terminal ready
5
GND, ground
6
DSR, Data set ready
7
RTS, Request to send
8
CTS, Clear to send
9
RI, Ring indicator
Jumpers and Connectors
13
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.3 COM2~COM4 Connectors (CN16, CN19, CN25)
The board has the onboard serial ports COM2~4 (CN16, CN19, CN25),
three 2*5-pin 2.54 pitch box-header to support RS-232.
Pin
Signal
Pin
Signal
1
Data Carrier
Detect (DCD)
2
Data Set Ready
(DSR)
3
Receive Data
(RXD)
4
Request to Send
(RTS)
5
Transmit Data
(TXD)
6
Clear to Send
(CTS)
7
Data Terminal
Ready (DTR)
8
Ring Indicator (RI)
9
Ground (GND)
10
NC
2.4.4
Audio Connector (CN3)
Color
Signal
Green
LINE_OUT
Red
14
MIC_IN
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.5
PS/2 Keyboard/Mouse Connector (CN4)
The board supports a keyboard and Mouse interface.
Pin
2.4.6
Signal
Pin
Signal
1
K/B Data
7
M/S Data
2
NC
8
NC
3
GND
9
GND
4
VCC
10
VCC
5
K/B CLK
11
M/S CLK
6
NC
12
NC
Print Port Connector (CN5)
Print Port Connector
This board has a multi-mode parallel port to support the following
modes:
1. Standard Mode
IBM PC/XT, PC/AT and PS/2™ are compatible with bi-directional
parallel port.
2. Enhanced Mode
Enhanced parallel port (EPP) is compatible with EPP 1.7 and EPP
1.9 (IEEE 1284 compliant).
3. High Speed Mode
Microsoft and Hewlett Packard extended capabilities port (ECP) is
IEEE 1284 compliant.
Please refer to next page for the list of pin assignment.
Jumpers and Connectors
15
IMB203 LGA775 ATX Motherboard User’s Manual
Print Port Pin Assignment (Default)
Pin
1
Signal
Data Carrier Detect (DCD)
2
Data Set Ready (DSR)
3
Receive Data (RXD)
4
Request to Send (RTS)
5
Transmit Data (TXD)
6
Clear to Send (CTS)
7
Data Terminal Ready (DTR)
8
Ring Indicator (RI)
9
Ground (GND)
2.4.7
USB Port Connector (CN6, CN7)
The Universal Serial Bus (USB) port connector on the board is for the
installation of peripherals supporting the USB interface. The CN6/CN7
consists of two 4-pin standard USB ports.
16
Pin
Signal
1, 5
USB Vcc
2, 6
USB -
3, 7
USB +
4, 8
USB GND
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.8
USB Connectors (CN27, CN29, CN33, CN45)
The 10-pin standard Universal Serial Bus (USB) connectors,
CN27/29/33/45, on this board are for installing versatile USB interface
peripherals.
Pin
Signal
Pin
Signal
1 USB
2
USB
3 USB2-
4
USB3-
5 USB2+
6
USB3+
7 GND
8
GND
9 GND
10 GND
Pin
Signal
Pin
Signal
1
USB
2
USB
3
USB4-
4
USB5-
5
USB4+
6
USB5+
7
GND
8
GND
10
GND
CN45
CN27, CN29, CN33,
2.4.9 ATX 4 Pin 12V In Connector (CN14)
You can connect it to the ATX12V power supply for CPU Core Voltage.
Pin
Signal
1
GND
2
GND
3
+12V
4
+12V
Jumpers and Connectors
17
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.10 Digital I/O Port (DIO) Connector (CN26)
The board is equipped an 8-channel digital I/O connector CN26 that
meets requirements for a system customary automation control. The
digital I/O can be configured to control cash drawers, sense warning
signals from an Uninterrupted Power System (UPS), or perform store
security control. The digital I/O is controlled via software programming.
Pin
Signal
Pin
Signal
1
DO1
2
DI1
3
DO2
4
DI2
5
DO3
6
DI3
7
DO4
8
DI4
9
GND
10
GND
2.4.11 CPU Fan Connector (CN31)
A CPU fan is always needed for cooling CPU heat. The CPU fan
connector provides power to the CPU fan.
Pin
Signal
1
Ground
2
+12V
3
Rotation Detection
4
Speed Control
2.4.12 SATA Connectors (CN36, CN37, CN41, CN42,
CN46, CN47)
These SATA connectors are for high-speed SATA interface ports and
they can be connected to hard disk devices.
Pin
18
Signal
1
GND
2
SATA_TX+
3
SATA_TX-
CN36/41/46
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
4
GND
5
SATA_RX-
6
SATA_RX+
7
GND
Jumpers and Connectors
19
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.13 ATX Power Connector (CN50)
Steady and sufficient power can be supplied to all components on the
board by connecting the power connector. Please make sure all
components and devices are properly installed before connecting the
power connector. If you use a 24-pin ATX power supply, please
remove the small cover from the power connector before plugging in
the power cord; otherwise, please do not remove it.
Pin
Signal
Pin
Signal
1
3.3V
2
3.3V
3
GND
4
5V
5
GND
6
5V
7
GND
8
PWR
9
5VSB
10
12V
11
12V
12
3.3V
13
3.3V
14
-12V
15
GND
16
PS_ON
17
GND
18
GND
19
GND
20
-5V
21
5V
22
5V
23
5V
24
GND
20
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
2.4.14 Front Panel Connector (CN52)
„
Power LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the
system power LED indicator to such a switch on the case. Pin 1 is
assigned as +, and Pin 5 as -. The Power LED lights up when the
system is powered ON. Pin 3 is defined as GND.
„
External Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted speaker
unit or internal buzzer. While connecting the CPU card to an
internal buzzer, please short pins 2-4; while connecting to an
external speaker, you need to set pins 2-4 to Open and connect the
speaker cable to pin 8 (+) and pin 2 (-).
„
ATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the front
panel’s ATX power button to the CPU card, which allows users to
control ATX power supply to be power on/off.
„
System Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset switch
that reboots your computer instead of turning OFF the power switch.
It is a better way to reboot your system for a longer life of the
system’s power supply.
„
HDD Activity LED
This connection is linked to hard drive activity LED on the control
panel. LED flashes when HDD is being accessed. Pin 13 and 14
connect the hard disk drive to the front panel HDD LED, Pin 13
assigned as -, and Pin 14 as +.
Jumpers and Connectors
21
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
22
Jumpers and Connectors
IMB203 LGA775 ATX Motherboard User’s Manual
CHAPTER 3
HARDWARE INSTALLATION
®
Before installing the processor, please access Intel website for more
detailed information http://www.intel.com .
3.1
Installing the Processor
The LGA775 processor socket comes with a cover to protect the processor.
Please install the processor into the CPU socket step by step as below:
Hold the hook (A) of the lever and push it down.
Pull the lever (B) aside to unlock the cover.
Hardware Installation
23
IMB203 LGA775 ATX Motherboard User’s Manual
Open the cover (C), you can
see the contact.
Be careful not to touch the
contact (D).
Remove the plastic cap (E) from the cover.
24
Hardware Installation
IMB203 LGA775 ATX Motherboard User’s Manual
Place the CPU down into the socket. Be careful not to touch the
contact.
Hold the edges of the CPU, and orientate it as the marked direction (G)
down into the socket to match the (H) and (F) locations.
Hardware Installation
25
IMB203 LGA775 ATX Motherboard User’s Manual
Slightly push down the cover and hook the lever (I~J). The CPU is
completely locked.
Orientate the CPU cooling fan to fixing holes on the board.
26
Hardware Installation
IMB203 LGA775 ATX Motherboard User’s Manual
Screw the CPU cooling fan onto the board.
Make sure the CPU fan is plugged to the CPU fan connector.
Hardware Installation
27
IMB203 LGA775 ATX Motherboard User’s Manual
3.2
Installing the Memory
The board supports four 240-pin DDR3 DIMM memory sockets with
maximum memory capacity up to 16GB.
Please follow steps below to install the memory modules:
1
2
Push down latches on each side of the DIMM socket.
Align the memory module with the socket that notches of
memory module must match the socket keys for a correct
installation.
Install the memory module into the socket and push it firmly
down until it is fully seated. The socket latches are levered
upwards and clipped on to the edges of the DIMM.
Install any remaining DIMM modules.
3
4
28
Hardware Installation
IMB203 LGA775 ATX Motherboard User’s Manual
CHAPTER 4
HARDWARE DESCRIPTION
4.1
Microprocessors
®
The IMB203 Series supports Intel Core™ 2 Quad / Core™ 2 Duo
®
processors, which make your system operated under Windows XP
and Linux environments. The system performance depends on the
microprocessor. Make sure all correct settings are arranged for your
installed microprocessor to prevent the CPU from damages.
4.2
BIOS
The IMB203 Series uses AMI Plug and Play BIOS with a single 32Mbit
SPI Flash.
4.3
System Memory
The IMB203 Series supports four 240-pin DDR3 DIMM sockets for a
maximum memory of 16GB DDR3 SDRAMs. The memory module can
come in sizes of 1GB, 2GB and 4GB.
Hardware Description
29
IMB203 LGA775 ATX Motherboard User’s Manual
4.4
I/O Port Address Map
®
®
The Intel Core™ 2 Extreme/ Intel Core™ 2 Quad / Core™ 2 Duo
CPUs can communicate via I/O ports. There are total 1KB port
addresses available for assignment to other devices via I/O expansion
cards.
Address
000-01F
020-02D, 024-025
028-029, 02C-02D
02E-02F
030-031, 034-035
038-039, 03C-03D
040-043, 050-053
Devices
DMA controller #1
Interrupt controller #1
Forwarded to LPC(LPC Super I/O )
Interrupt controller #2
Timer/Counter (8254)
060
Forwarded to LPC (Microcontroller)
061
062-066
NMI
Forwarded to LPC (Microcontroller)
070-077
080-091
Real time clock, NMI
DMA page register
092
093-09F
0A0-0BF
Processor I/F(Reset Generator)
DMA page register
Interrupt controller #2
0C0-0DF
DMA controller #2
0F0
0F8-0FF
Processor I/F
Math processor
170-177
1F0-1F7
Forward to SATA (SATA Controller)
Forward to SATA (SATA Controller)
376
Forward to SATA(SATA Controller)
378-37F
380-38F
Parallel Port (LPT)
SDLC #2
3A0-3AF
SDLC #1
3B0-3BF
MDA video card
(to be continued)
30
Hardware Description
IMB203 LGA775 ATX Motherboard User’s Manual
Address
Devices
3C0-3CF
4.5
EGA card
3D0-3DF
CGA card
3F6
3F8-3FF
Forward to SATA(SATA Controller)
Serial port #1 (COM1)
2F8-2FF
Serial port #2 (COM2)
Interrupt Controller (IRQ) Map
The IMB203 Series is a 100% PC compatible control board. It consists
of 16 interrupt request lines, and four out of them can be
programmable. The mapping list of the 16 interrupt request lines is
shown as the following table.
IRQ0
IRQ
Parity check error
System Timer Output
IRQ1
Keyboard
IRQ2
Interrupt rerouting from IRQ8 through IRQ15
IRQ3
Serial port #2
IRQ4
Serial port #1
IRQ5
PCI Device Share
IRQ7
Parallel port
IRQ8
Real time clock
IRQ9
ACPI Controller
IRQ10
PCI Device Share
IRQ11
PCI Device Share
IRQ12
PS/2 Mouse
IRQ13
Math coprocessor
IRQ14
SATA Primary (Legacy Mode)
IRQ15
SATA Secondary (Legacy Mode)
Hardware Description
31
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
32
Hardware Description
IMB203 LGA775 ATX Motherboard User’s Manual
CHAPTER 5
AMI BIOS SETUP UTILITY
This chapter provides users with detailed description how to set up
basic system configuration through the AMIBIOS8 BIOS setup utility.
5.1
Starting
To enter the setup screens, follow the steps below:
1.
2.
5.2
Turn on the computer and press the <Del> key immediately.
After you press the <Delete> key, the main BIOS setup menu
displays. You can access the other setup screens from the main
BIOS setup menu, such as the Chipset and Power menus.
Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot
keys. Most of the BIOS setup utility hot keys can be used at any time
during the setup navigation process.
These keys include <F1>, <F10>, <Enter>, <ESC>, <Arrow> keys, and
so on.
Note Some of navigation keys differ from one screen to another.
AMI BIOS Setup Utility
33
IMB203 LGA775 ATX Motherboard User’s Manual
Å Left/Right
The Left <Arrow> keys allow you to select a setup
screen.
ÇÈ Up/Down
The Up and Down <Arrow> keys allow you to select
a setup screen or sub-screen.
+− Plus/Minus
Tab
F1
F10
Esc
Enter
34
The Plus and Minus <Arrow> keys allow you to
change the field value of a particular setup item.
The <Tab> key allows you to select setup fields.
The <F1> key allows you to display the General
Help screen.
The <F10> key allows you to save any changes you
have made and exit Setup. Press the <F10> key to
save your changes.
The <Esc> key allows you to discard any changes
you have made and exit the Setup. Press the
<Esc> key to exit the setup without saving your
changes.
The <Enter> key allows you to display or change the
setup option listed for a particular setup item. The
<Enter> key can also allow you to display the setup
sub- screens.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
5.3
Main Menu
When you first enter the Setup Utility, you will enter the Main setup
screen. You can always return to the Main setup screen by selecting
the Main tab. There are two Main Setup options. They are described in
this section. The Main BIOS Setup screen is shown below.
z
System Time/Date
Use this option to change the system time and date. Highlight
System Time or System Date using the <Arrow> keys. Enter new
values through the keyboard. Press the <Tab> key or the <Arrow>
keys to move between fields. The date must be entered in
MM/DD/YY format. The time is entered in HH:MM:SS format.
AMI BIOS Setup Utility
35
IMB203 LGA775 ATX Motherboard User’s Manual
5.4
Advanced Menu
The Advanced menu allows users to set configuration of the CPU and
other system devices. You can select any of the items in the left frame
of the screen to go to the sub menus:
„
CPU Configuration
IDE Configuration
SuperIO Configuration
Hardware Health Configuration
ACPI Configuration
AHCI Configuration
Intel iAMT Configuration
Intel VT-d Configuration
MPS Configuration
PCI Express Configuration
Trusted Computing
USB Configuration
„
„
„
„
„
„
„
„
„
„
„
For items marked with “f”, please press <Enter> for more options.
36
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
CPU Configuration
This screen shows the CPU Configuration, and you can change the
value of the selected option.
¾
Max CPUID Value Limit
You can enable this item to let legacy operating systems
boot even without support for CPUs with extended CPU ID
functions.
¾
Execute-Disable Bit Capability
This item helps you enable or disable the No-Execution
Page Protection Technology.
¾
Core Multi-Processing
This feature controls the functionality of the Core MultiProcessing to allow the processor to execute multitasking
function.
¾
PECI
Use this item PECI (Platform Environment Control Interface)
to execute the processor temperature monitoring and
management.
AMI BIOS Setup Utility
37
IMB203 LGA775 ATX Motherboard User’s Manual
¾
z
Intel (R) C-STATE tech
Use this item to enable or disable the C-State technology.
IDE Configuration
You can use this screen to select options for the IDE Configuration,
and change the value of the selected option. A description of the
selected item appears on the right side of the screen. For items
marked with “f”, please press <Enter> for more options.
38
¾
SATA#1 Configuration
Use this item to control the onboard SATA controller. Here
are the options for your selection, Compatible, Disabled,
and Enhanced.
¾
Configure SATA#1 as
Use this item to choose the SATA operation mode. Here
are the options for your selection, IDE and AHCI.
¾
SATA#2 Configuration
Use this item to control the onboard SATA controller. Here
are the options for your selection, Enhanced and Disabled.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
¾
Primary/Secondary/Third IDE Master
Select one of the hard disk drives to configure IDE devices
installed in the system by pressing <Enter> for more
options.
¾
Fifth IDE Master
Select one of the hard disk drives to configure IDE devices
installed in the system by pressing <Enter> for more
options.
AMI BIOS Setup Utility
39
IMB203 LGA775 ATX Motherboard User’s Manual
z
SuperIO Configuration
You can use this screen to select options for the SuperIO
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
Serial Port1 Address
This option specifies the base I/O port address and
Interrupt Request address of serial port 1. The Optimal
setting is 3F8/IRQ4. The Fail-Safe default setting is
Disabled.
¾
Serial Port2 Address
This option specifies the base I/O port address and
Interrupt Request address of serial port 2. The Optimal
setting is 2F8/IRQ3. The Fail-Safe setting is Disabled.
¾
Parallel Port Address
This item allows you to determine the I/O address for
onboard parallel port. There are several options for your
selection.
z
40
Parallel Port Mode
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Select an operating mode for the onboard parallel (printer)
port.
Parallel Port IRQ
Use this item to set up the IRQ for onboard parallel port.
¾
Serial Port3 Address
This item specifies the base I/O port address and Interrupt
Request address of serial port 3. The Optimal setting is
3E8/IRQ11. The Fail-Safe default setting is Disabled.
¾
Serial Port3 IRQ
This item specifies the IRQ used by the serial port 3.
¾
Serial Port4 Address
This item specifies the base I/O port address and Interrupt
Request address of serial port 4. The Optimal setting is
2E8/IRQ10. The Fail-Safe default setting is Disabled.
¾
Serial Port4 IRQ
This item specifies the IRQ used by the serial port 4.
AMI BIOS Setup Utility
41
IMB203 LGA775 ATX Motherboard User’s Manual
z
Hardware Health Configuration
This screen shows the Hardware Health Configuration, and a
description of the selected item appears on the right side of the
screen.
¾
42
H/W Health Configuration
This screen displays the temperature of CPU and System,
Fan Speed, Vcore, etc.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
ACPI Configuration
You can use this screen to select options for the ACPI
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
General ACPI Configuration
Scroll to this item and press <Enter> to view the General
ACPI Configuration sub menu, which contains General
ACPI (Advanced Configuration and Power Management
Interface) options for your configuration.
¾
Advanced ACPI Configuration
Scroll to this item and press <Enter> to view the Advanced
ACPI Configuration sub menu, which contains Advanced
ACPI (Advanced Configuration and Power Management
Interface) options for your configuration.
¾
Chipset ACPI Configuration
Scroll to this item and press <Enter> to view the Chipset
ACPI Configuration sub menu, which contains Chipset
ACPI (Advanced Configuration and Power Management
AMI BIOS Setup Utility
43
IMB203 LGA775 ATX Motherboard User’s Manual
z
Interface) options for your configuration.
AHCI Configuration
You can use this screen to select options for the AHCI
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
44
AHCI BIOS Support
You can enable or disable this item to control the AHCI
function of the SATA controller.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Intel iAMT Configuration
You can use this screen to select options for the Intel iAMT
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
Intel iAMT Support
You can enable this item to support iAMT (active
management technology) function to follow up the
procedure for the access to AMI program screen.
¾
Unconfigure iAMT/ME
Use this item to unconfigure the iAMT/ME settings.
AMI BIOS Setup Utility
45
IMB203 LGA775 ATX Motherboard User’s Manual
z
Intel VT-d Configuration
You can use this screen to select options for the Intel VT-d
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
46
Intel VT-d
Virtualization Technology for Directed I/O (VT-d) extends
Virtualization Technology (VT) roadmap, by providing
hardware assists for virtualization solution.
VT-d can help end users improve security and reliability of
the systems and also improve performance of I/O devices
in virtualized environment. Here are the options for your
selection, Disabled and Enabled.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Remote Access Configuration
You can use this screen to select options for the Remote Access
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
Remote Access
Use this item to enable or disable the Remote Access
function.
AMI BIOS Setup Utility
47
IMB203 LGA775 ATX Motherboard User’s Manual
z
PCI Express Configuration
This screen shows the PCI Express Configuration, and you can
change its value. A description of the selected item appears on the
right side of the screen.
¾
48
Active State Power-Management
Use this item to enable or disable the function of Active
State Power-Management to provide you with lower power
consumption. The default setting is Disabled.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Trusted Computing
You can use this screen to select options for the Trusted
Computing, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
¾
TCG/TPM SUPPORT
Use this item to control the Trusted Platform Module (TPM)
function.
AMI BIOS Setup Utility
49
IMB203 LGA775 ATX Motherboard User’s Manual
z
USB Configuration
You can use this screen to select options for the USB
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
50
¾
USB Functions
This item allows you to enable or disable USB functions.
¾
Legacy USB Support
Use this item to enable or disable support for USB device
on legacy operating system. The default setting is Enabled.
¾
USB 2.0 Controller Mode
Use this item to configure the USB 2.0 controller. The
default setting is HiSpeed.
¾
BIOS EHCI Hand-Off
Enabling this item provide the support for operating
systems without an EHCI hand-off feature. The default
setting is Enabled.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
AMI BIOS Setup Utility
51
IMB203 LGA775 ATX Motherboard User’s Manual
5.5
PCI PnP Menu
The PCI PnP menu allows users to change the advanced settings for
PCI/PnP devices.
52
¾
Clear NVRAM
Use this item to clear the data in the NVRAM (CMOS).
Here are the options for your selection, No and Yes.
¾
Plug & Play O/S
When the setting is No, Use this item to configure all the
devices in the system. When the setting is Yes and if you
install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required
for boot. The default setting is No.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
¾
PCI Latency Timer
This item controls how long a PCI device can hold the PCI
bus before another takes over. The longer the latency, the
longer the PCI device can retain control of the bus before
handing it over to another PCI device. There are several
options for your selection.
¾
Allocate IRQ to PCI VGA
This item allows BIOS to choose an IRQ to assign for the
PCI VGA card. Here are the options for your selection, No
and Yes.
¾
Palette Snooping
Some old graphic controllers need to “snoop” on the VGA
palette, and then map it to their display as a way to provide
boot information and VGA compatibility. This item allows
such snooping to take place. Here are the options for your
selection, Disabled and Enabled.
¾
PCI IDE BusMaster
This item is a toggle for the built-in driver that allows the
onboard IDE controller to perform DMA (Direct Memory
Access) transfer. Here are the options for your selection,
Disabled and Enabled.
¾
OffBoard PCI/ISA IDE Card
This item is for any other non-onboard PCI/ISA IDE
controller adapter. There are several options for your
selection.
¾
IRQ3/4/5/7/9/10/11/14/15
These items will allow you to assign each system interrupt
a type, depending on the type of device using the interrupt.
The option “Available” means the IRQ is going to assign
automatically. Here are the options for your selection,
Available and Reserved.
¾
DMA Channel 0/1/3/5/6/7
These items will allow you to assign each DMA channel a
type, depending on the type of device using the channel.
The option “Available” means the channel is going to
assign automatically. Here are the options for your
selection, Available and Reserved.
AMI BIOS Setup Utility
53
IMB203 LGA775 ATX Motherboard User’s Manual
5.6
Boot Menu
The Boot menu allows users to change boot options of the system. You
can select any of the items in the left frame of the screen to go to the
sub menus:
„
Boot Settings Configuration
Boot Device Priority
Removable Drives
„
„
For items marked with “f”, please press <Enter> for more options.
54
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Boot Settings Configuration
¾
Quick Boot
Enabling this item lets the BIOS skip some power on self
tests (POST). The default setting is Enabled.
¾
AddOn ROM Display Mode
This item selects the display mode for option ROM. The
default setting is Force BIOS.
¾
Boot Num-Lock
Use this item to select the power-on state for the NumLock.
The default setting is On.
¾
PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for
the PS/2 mouse or allow other devices to make use of this
IRQ. Here are the options for your selection, Auto, Enabled
and Disabled.
¾
Wait For ‘F1’ Of Error
If this item is enabled, the system waits for the F1 key to be
pressed when error occurs. The default setting is Enabled.
¾
Hit ‘DEL’ Message Display
If this item is enabled, the system displays the message
AMI BIOS Setup Utility
55
IMB203 LGA775 ATX Motherboard User’s Manual
“Press DEL to run Setup” during POST. The default setting
is Enabled.
¾
z
Interrupt 19 Capture
If this item is enabled, this function makes the option ROMs
to trap Interrupt 19. The default setting is Disabled.
Boot Device Priority
The Boot Device Priority screen specifies the boot device priority
sequence from the available devices.
56
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
Removable Drives
Use this screen to view the removable drives in the system. The
BIOS will attempt to arrange the removable drive boot sequence
automatically. You can also change the booting sequence.
AMI BIOS Setup Utility
57
IMB203 LGA775 ATX Motherboard User’s Manual
5.7
Security Menu
The Security menu allows users to change the security settings for the
system.
58
¾
Supervisor Password
This item indicates whether a supervisor password has
been set. If the password has been installed, Installed
displays. If not, Not Installed displays.
¾
User Password
This item indicates whether a user password has been set.
If the password has been installed, Installed displays. If not,
Not Installed displays.
¾
Change Supervisor Password
Select this option and press <Enter> to access the sub
menu. You can use the sub menu to change the supervisor
password.
¾
Change User Password
Select this option and press <Enter> to access the sub
menu. You can use the sub menu to change the user
password.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
5.8
Chipset Menu
The Chipset menu allows users to change the advanced chipset
settings. You can select any of the items in the left frame of the screen
to go to the sub menus:
„
„
„
North Bridge Configuration
South Bridge Configuration
ME Subsystem Configuration
For items marked with “f”, please press <Enter> for more options.
AMI BIOS Setup Utility
59
IMB203 LGA775 ATX Motherboard User’s Manual
z
North Bridge Configuration
60
¾
Memory Remap Feature
Use this item to enable or disable the remapping of the
overlapped PCI memory above the total physical memory.
Only 64-bit OS supports this function.
¾
DRAM Frequency
This item allows you to control the Memory Clock.
¾
Configure DRAM Timing by SPD
This item can enable or disable DRAM timing by SPD
(Serial Presence Detect) device, which is a small EEPROM
chip on the memory module, containing important
information about the module speed, size, addressing
mode and various parameters.
¾
Memory Hole
You can reserve this area of system memory for ISA
adapter ROM. When this area is reserved it cannot be
cached. Check the user information of peripherals that
need to use this area o f system memory for the memory
requirements. Here are the options, Disabled and 15M-16M.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
¾
Initiate Graphic Adapter
When using multiple graphics cards, this item can select
which graphics controller to be the primary display device
during boot.
¾
IGD Graphics Mode Select
This item allows you to select the amount of system
memory used by the internal graphics device.
¾
PEG Port Configuration/PEG Port
This item is a toggle to enable or disable the PCI Express
port. Here are the options for your selection, Auto and
Disabled.
¾
Video Function Configuration
Press <Enter> for the sub-menu for setting up video
function.
AMI BIOS Setup Utility
61
IMB203 LGA775 ATX Motherboard User’s Manual
z
South Bridge Configuration
62
¾
GbE Wake Up From S5
This item specifies whether the system will be awakened
from the S5 power.
¾
HDA Controller
This item allows you to enable or disable the HD audio
support.
¾
Restore on AC Power Loss
This item can control how the PC will behave once power is
restored following a power outage, or other unexpected
shutdown.
¾
PCIE Port Configuration
This item allows you to set or disable the PCI Express
Ports.
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
z
ME Subsystem Configuration
It is strongly recommended that you do not modify these options
unless you are an advanced user.
AMI BIOS Setup Utility
63
IMB203 LGA775 ATX Motherboard User’s Manual
5.9
Exit Menu
The Exit menu allows users to load your system configuration with
optimal or failsafe default values.
64
¾
Save Changes and Exit
When you have completed the system configuration
changes, select this option to leave Setup and reboot the
computer so the new system configuration parameters can
take effect. Select Save Changes and Exit from the Exit
menu and press <Enter>. Select Ok to save changes and
exit.
¾
Discard Changes and Exit
Select this option to quit Setup without making any
permanent changes to the system configuration. Select
Discard Changes and Exit from the Exit menu and press
<Enter>. Select Ok to discard changes and exit.
¾
Load Optimal Defaults
It automatically sets all Setup options to a complete set of
default settings when you select this option. The Optimal
settings are designed for maximum system performance,
but may not work best for all computer applications. In
particular, do not use the Optimal Setup options if your
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
computer is experiencing system configuration problems.
Select Load Optimal Defaults from the Exit menu and press
<Enter>.
¾
Load Fail-Safe Defaults
It automatically sets all Setup options to a complete set of
default settings when you select this option. The Fail-Safe
settings are designed for maximum system stability, but not
maximum performance. Select the Fail-Safe Setup options
if your computer is experiencing system configuration
problems.
Select Load Fail-Safe Defaults from the Exit menu and
press <Enter>. Select Ok to load Fail-Safe defaults.
AMI BIOS Setup Utility
65
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
66
AMI BIOS Setup Utility
IMB203 LGA775 ATX Motherboard User’s Manual
CHPATER 6
INSTALLATION OF DRIVERS
The device drivers are located on the Product Information CD-ROM
that comes with the IMB203 Series package. The auto-run function of
drivers will guide you to install the utilities and device drivers under a
Windows system. You can follow the onscreen instructions to install
these devices:
6.1
„ Chipse
„ VGA
„ LAN
„ Audio
„ iAMT
„ MEI
Installing Chipset Driver
1. Run the SETUP.EXE program from the driver directory in
your driver CD. Click “Next” to next step.
Installation of Drivers
67
IMB203 LGA775 ATX Motherboard User’s Manual
2.
®
An Intel License Agreement appears to show you the
important information. Click “Yes” to next step.
3. Refer to the Readme file below to view the system
requirements and installation information.
68
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
3-1 Please wait while running the following setup operations.
3-2 Please wait while running the following setup operations.
Installation of Drivers
69
IMB203 LGA775 ATX Motherboard User’s Manual
70
4.
Click “Finish” to complete the setup process.
5.
You will be asked to reboot your computer when the
installation is completed. Please click “Yes, I want to restart
my computer now” if you don’t need to install any other
drivers. Otherwise, please click “No, I will restart my
computer later”, and go on next step.
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
6.2
Installing VGA Driver
1. Run the SETUP.EXE program from the driver directory in
your driver CD. Click “Next” to next step.
2.
®
An Intel License Agreement appears to show you the
important information. Click “Yes” to next step.
Installation of Drivers
71
IMB203 LGA775 ATX Motherboard User’s Manual
72
3.
The message of Readme File Information appears to show
you the system requirements and installation information.
Please click “Next”.
4.
Please wait while running the following setup operations.
When this message appears, please click “Next”.
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
5.
Click “Finish” to complete the setup process.
6.
You will be asked to reboot your computer when the
installation is completed. Please click “Yes, I want to restart
my computer now” if you don’t need to install any other
drivers. Otherwise, please click “No, I will restart my
computer later”, and click “Finish” to complete the
installation.
Installation of Drivers
73
IMB203 LGA775 ATX Motherboard User’s Manual
6.3
Installing LAN Driver
1.1 Run the InstallShield Wizard for Network Connections from
the driver directory in your driver CD. Click “Next” to next
step.
74
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
®
1.2 An Intel License Agreement appears to show you the
important information. Click “Yes” to next step.
1.3 A Setup Options window appears that you can select the
program features you want to install.
Installation of Drivers
75
IMB203 LGA775 ATX Motherboard User’s Manual
76
2.
Click “Install” to start the installation.
3.
Please wait while running the following installation operation.
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
4.
Click “Finish” to complete the installation.
格式化: 字型: (符號) Arial
Note
The Driver item [Wake on Directed Packet] default is
Enabled under Windows Vista.
格式化: 字型: (符號) Arial
格式化: 字型: 斜體, 字型色
彩: 黑色, (符號) Arial, 非加寬
/ 緊縮
格式化: 字型: 斜體, 字型色
彩: 黑色, (符號) Arial, 非加寬
/ 緊縮
格式化: 字型: (符號) Arial, 非
加寬 / 緊縮
Installation of Drivers
77
IMB203 LGA775 ATX Motherboard User’s Manual
6.4
Installing AUDIO Driver
1.
78
Run the InstallShield Wizard for Realtek High Definition
Audio Driver from the driver directory in your driver CD.
Click “Next” to next step.
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
2.
Click “Install” to start the installation, and wait while running
the installation operation.
3.
Click “Finish” to complete the installation.
Installation of Drivers
79
IMB203 LGA775 ATX Motherboard User’s Manual
6.5
Installing iAMT (Active Management
Technology) Driver
格式化: 字型: (符號) Arial
Note
6.5.1
1.
80
You must download and properly install the
required .NET version 3.5 provided from a separate
downloading of the actual Fimware/Tools kit
releases posted on VIP prior to loading the MEI/LMS
Driver stack.
LMS_SOL Setup
®
Run the setup program to install Intel Active Management
Technology onto your computer. It is strongly recommended
that you exit all programs before continuing. Click “Next” to
next step.
Installation of Drivers
格式化: 字型: (符號) Arial, 非
加寬 / 緊縮
IMB203 LGA775 ATX Motherboard User’s Manual
®
2. An Intel license agreement appears that you need to
continue the setup program by clicking “Yes” to accept the
terms.
Installation of Drivers
81
IMB203 LGA775 ATX Motherboard User’s Manual
3. Refer to the Readme file below to view the system
requirements and installation information. Click “Next” to next
setup.
4. Please wait while running the following installation operation.
82
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
5.
Click “Finish” to complete the installation.
Installation of Drivers
83
IMB203 LGA775 ATX Motherboard User’s Manual
6.5.2
1.
84
LMS_SOL_IS Setup
®
Run the setup program to install Intel Active Management
Technology onto your computer. It is strongly recommended
that you exit all programs before continuing. Click “Next” to
next step.
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
2.
®
An Intel license agreement appears that you need to
continue the setup program by clicking “Yes” to accept the
terms.
Installation of Drivers
85
IMB203 LGA775 ATX Motherboard User’s Manual
3. Refer to the Readme file below to view the system
requirements and installation information. Click “Next” to next
setup.
4. Please wait while running the following installation operation.
86
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
5.
Click “Finish” to complete the installation.
Installation of Drivers
87
IMB203 LGA775 ATX Motherboard User’s Manual
6.6
Installing MEI (Management Engine
Interface) Driver
格式化: 字型: (符號) Arial
Note
1.
88
You must download and properly install the
required .NET version 3.5 provided from a separate
downloading of the actual Fimware/Tools kit
releases posted on VIP prior to loading the MEI/LMS
Driver stack.
®
Run the setup program to install Intel Management Engine
Interface onto your computer. It is strongly recommended
that you exit all programs before continuing. Click “Next” to
next step.
Installation of Drivers
格式化: 字型: (符號) Arial, 非
加寬 / 緊縮
IMB203 LGA775 ATX Motherboard User’s Manual
®
2. An Intel license agreement appears that you need to
continue the setup program by clicking “Yes” to accept the
terms.
Installation of Drivers
89
IMB203 LGA775 ATX Motherboard User’s Manual
3. Refer to the Readme file below to view the system
requirements and installation information. Click “Next” to
next setup.
4. Please wait while running the following installation operation.
90
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
5.
Click “Finish” to complete the installation.
Installation of Drivers
91
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
92
Installation of Drivers
IMB203 LGA775 ATX Motherboard User’s Manual
格式化
APPENDIX A
WATCHDOG TIMER
格式化: 項目符號及編號
Watchdog Timer Setting
After the system stops working for a while, it can be auto-reset by the
Watchdog Timer. The integrated Watchdog Timer can be set up in the
system reset mode by program.
格式化: 項目符號及編號
Using the Watchdog Function
Start
↓
Un-Lock WDT
:O 2E 87 ; Un-lock super I/O
O 2E 87 ; Un-lock super I/O
格式化: 字型: 8 點, 字型色彩:
黑色
↓
Set WDT Function
格式化: 字型: 8 點, 字型色彩:
黑色
O 2E 2D
O 2F 20
Select Logic device
O 2E 07
O 2F 08
↓
Activate WDT
:O 2E 30
O 2F 01
格式化: 定位點: 12.57 字元,
左 + 不在 10.12 字元 + 13.86
字元
Set Second or Minute
O 2E F5
O 2F N
格式化: 字型: 8 點, 字型色彩:
黑色
N=00 or 08(See below table)
↓
Set base timer
:O 2E F6
O 2F M=00,01,02,…FF(Hex) ,Value=0 to 255
↓
WDT counting
格式化: 定位點: 12.57 字元,
左 + 不在 13.4 字元 + 13.62
字元
刪除:
格式化: 字型色彩: 黑色
re-set timer
:O 2E F6
O 2F M ; M=00,01,02,…FF(See below table)
↓
Watchdog Timer
93
格式化: 字型色彩: 黑色
IMB203 LGA775 ATX Motherboard User’s Manual
IF No re-set timer
:WDT time-out, generate RESET
格式化: 字型色彩: 黑色
IF to disable WDT
:O 2E 30
O 2F 00 ; Can be disable at any time
格式化: 字型色彩: 黑色
N=00
M= 00h: Time-out Disable
01h: Time-out occurs after 1 second
02h: Time-out occurs after 2 second
03h: Time-out occurs after 3 second
……………………….......................................
FFh: Time-out occurs after 255 second
N=08
M= 00h: Time-out Disable
01h: Time-out occurs after 1 minute
02h: Time-out occurs after 2 minutes
03h: Time-out occurs after 3 minutes
……………………….......................................
FFh: Time-out occurs after 255 minutes
94
Watchdog Timer
IMB203 LGA775 ATX Motherboard User’s Manual
APPENDIX B
PCI IRQ ROUTING
PICMG PCI IRQ Routing
PCI IRQ Routing
Device
ID
Slot
Int
PCI Slot 0
PCI Slot 1
31
30
0
1
BCDA
CDAB
PCI Slot 2
PCI Slot 3
29
28
2
3
DABC
ABCD
95
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
96
PCI IRQ Routing
IMB203 LGA775 ATX Motherboard User’s Manual
APPENDIX C
CONFIGURING SATA FOR RAID
FUNCTION
Configuring SATA Hard Drive(s) for RAID
®
Function (Controller: Intel ICH10DO/DO DH
only)
Please follow up the steps below to configure SATA hard drive(s):
(1) Install SATA hard drive(s) in your system.
(2) Enter the BIOS Setup to configure SATA controller mode and boot
sequence.
(3) Configure RAID by the RAID BIOS.
(4) Install the SATA controller driver during the OS installation.
Before you begin the SATA configuration, please prepare:
(a) Two SATA hard drives (to ensure optimal performance, it is
recommended that you use two hard drives with identical model
and capacity). If you do not want to create RAID with the SATA
controller, you may prepare only one hard drive.
(b) An empty formatted floppy disk
(c) Windows XP setup disk
(1) Installing SATA hard drive(s) in your system
Connect one end of the SATA signal cable to the rear of the SATA
hard drive, and the other end to available SATA port(s) on the
board. Then, connect the power connector of power supply to the
hard drive.
(2) Configuring SATA controller mode and boot sequence by the
BIOS Setup
You have to make sure whether the SATA controller is configured
correctly by system BIOS Setup and set up BIOS boot sequence for
the SATA hard drive(s).
Configuring SATA for RAID Function
97
IMB203 LGA775 ATX Motherboard User’s Manual
(2)-1-1
98
Turn on your system, and then press the Del button to enter
BIOS Setup during running POST (Power-On Self Test). If
you want to create RAID, just go to the Advanced Settings
menu/IDE configuration, select the Configure SATA#1 as,
and press <Enter> for more options.
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
(2)-1-2
A list of options appears, please select RAID.
Configuring SATA for RAID Function
99
IMB203 LGA775 ATX Motherboard User’s Manual
(2)-2
(2)-3
100
Set CDROM for First Boot Device under the Boot Settings
menu to boot CD-ROM after system restarts.
Save and exit the BIOS Setup.
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
(3) Configuring RAID by the RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this
step and proceed to Section 4 if you do not want to create a RAID.
(3)-1
After the POST memory testing and before the operating
system booting, a message "Press <Ctrl-I> to enter
Configuration Utility" shows up, accordingly, press <CTRL+ I>
to enter the RAID BIOS setup utility.
(3)-2
After you press <CTRL+ I>, the Create RAID Volume screen
will appear. If you want to create a RAID array, select the
Create RAID Volume option in the Main Menu and press
ENTER.
Configuring SATA for RAID Function
101
IMB203 LGA775 ATX Motherboard User’s Manual
(3)-3-1
After entering the CREATE VOLUME MENU screen, you can
type the disk array name with 1~16 letters (letters cannot be
special characters) in the item “Name”.
(3)-3-2
When finished, press ENTER to select a RAID level. There
are three RAID levels, RAID0, RAID1 and RAID5 & RAID10.
Select a RAID level and press ENTER.
102
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
(3)-4
Set the stripe block size. The KB is the standard unit of stripe
block size. The stripe block size can be 4KB to 128KB. After
the setting, press ENTER for the array capacity.
(3)-5
After setting all the items on the menu, select Create Volume
and press ENTER to start creating the RAID array.
Configuring SATA for RAID Function
103
IMB203 LGA775 ATX Motherboard User’s Manual
(3)-6
When prompting the confirmation, press “Y“ to create this
volume, or “N“ to cancel the creation.
After the creation is completed, you can see detailed information about
the RAID Array in the DISK/VOLUME INFORMATION section,
including RAID mode, disk block size, disk name, and disk capacity,
etc.
104
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
Delete RAID Volume
If you want to delete a RAID volume, select the Delete RAID Volume
option in Main Menu. Press ENTER and follow on-screen instructions.
Please press [ESC] to exit the RAID BIOS utility.
Now, you can proceed to install a SATA driver controller and the
operating system.
Configuring SATA for RAID Function
105
IMB203 LGA775 ATX Motherboard User’s Manual
(4) Making a SATA Driver Disk
To install the operating system onto a serial ATA hard disk successfully,
you need to install the SATA controller driver during the OS installation.
Without the driver, the hard disk may not be recognized during the
Windows setup process. First of all, please format a blank floppy disk.
Secondly, follow up these steps below to produce a SATA driver disk.
Users can insert the Driver CD and the formatted blank floppy disk in
another system. And then, please copy all of file of the f6flpy32 folder in
the Driver CD to a floppy disk.
Note
106
Please copy all of file of the f6flpy64 folder, if installing 64-bit
Windows Operating System.
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
(5) Installing the SATA controller driver during the OS installation
Now, the SATA driver disk is ready, and BIOS settings configured, you
can proceed to install Windows 2000/XP onto your SATA hard drive
using the SATA driver. Here is an example for Windows XP installation.
(5)-1
Restart your system to boot the Windows 2000/XP Setup disk,
and press F6 button as soon as you see the message "Press
F6 if you need to install a 3rd party SCSI or RAID driver".
After pressing the F6 button, there will be a few moments for
some files being loaded before next screen appears.
Configuring SATA for RAID Function
107
IMB203 LGA775 ATX Motherboard User’s Manual
(5)-2
When you see the screen below, insert the floppy disk
containing the SATA driver and press “S”.
(5)-3
If the Setup correctly recognizes the driver of the floppy disk,
a controller menu will appear below. Use the ARROW keys to
select Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID
Controller and press ENTER. Then it will begin to load the
SATA driver from the floppy disk.
108
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
Note
If a message on the screen saying that one or some file(s)
cannot be found, please check the floppy disk or copy the
correct SATA driver again from the driver CD.
Configuring SATA for RAID Function
109
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
110
Configuring SATA for RAID Function
IMB203 LGA775 ATX Motherboard User’s Manual
APPENDIX D
iAMT SETTINGS
®
®
The Intel Active Management Technology (Intel iAMT) has
decreased a major barrier to IT efficiency that uses built-in platform
capabilities and popular third-party management and security
applications to allow IT a better discovering, healing, and protection
their networked computing assets.
In order to utilize Intel iAMT you must enter the ME BIOS (CTRL + P
during system startup), change the ME BIOS password, and then
®
select “Intel iAMT” as the manageability feature.
D.1
Entering MEBx
1. You must go to BIOS TO start iAMT function.
2. Exit from BIOS after starting iAMT, and press Ctrl+P to enter MEBx
Setting.
It is better to press Ctrl+P before the screen popping out.
iAMT Settings
111
格式化
IMB203 LGA775 ATX Motherboard User’s Manual
D.2
Set & Change Password
1. You will be asked to set a password when first log in. The default
password is ‘admin’.
Change Password
2. You will be asked to change the password before setting ME.
112
iAMT Settings
IMB203 LGA775 ATX Motherboard User’s Manual
3. You must confirm your new password while revising. (as Remark 1)
Remark 1
The new password must contain:
(example: !!11qqQQ) (default value)
z
Eight characters
z
One upper case
z
One lower case
z
One number
z
One special symbol, such as ! 、 $ or ; ,
(、 " , excepted)
Underline ( _ ) and space are valid characters for password, but they
won’t make higher complexity.
iAMT Settings
113
IMB203 LGA775 ATX Motherboard User’s Manual
D.3
®
Intel iAMT Settings
®
1.
Select Intel iAMT Configuration and press <ENTER>.
2.
Key in the Host Name. If Intel iAMT set to ‘DHCP‘, the Host name
must be identical to the operating system mechanic.
114
®
iAMT Settings
IMB203 LGA775 ATX Motherboard User’s Manual
3.
Select TCP/IP to get into Network interface, and set it to
‘ENABLED’; into DHCP Mode, and set it to ‘DISABLED’ (as
Remark 2) ; into Domain name, and set the Intel Management
Engine domain name, such as ‘AMT.intel.com’.
(3-1)
(3-2)
iAMT Settings
115
IMB203 LGA775 ATX Motherboard User’s Manual
Remark 2
DHCP Mode ‘DISABLED‘: if DHCP Mode is
disabled, you can make the following settings:
z
z
116
IP address
Subnet mask
iAMT Settings
IMB203 LGA775 ATX Motherboard User’s Manual
iAMT Settings
z
Default Gateway address
z
Preferred DNS address
117
IMB203 LGA775 ATX Motherboard User’s Manual
4.
z
Alternate DNS address
z
Domain name
Exit from MEBx after completing the iAMT settings.
118
iAMT Settings
IMB203 LGA775 ATX Motherboard User’s Manual
D.4
iAMT Web Console
1.
From a web browser, please type http://(IP ADDRESS):16992,
which connects to iAMT Web.
Example: http://10.1.40.214:16992
2.
To log on, you will be required to type in username and password
for access to the Web.
USER: admin (default value)
PASS: (MEBx password)
iAMT Settings
119
IMB203 LGA775 ATX Motherboard User’s Manual
3.
Enter the iAMT Web.
4.
Click Remote Control, and select commands on the right side.
120
iAMT Settings
IMB203 LGA775 ATX Motherboard User’s Manual
5.
When you have finished using the iAMT Web console, close the
Web browser.
iAMT Settings
121
IMB203 LGA775 ATX Motherboard User’s Manual
MEMO
122
iAMT Settings
Download PDF