Operation Manual 5,299 KB

Operation Manual 5,299 KB
MODEL
LC-32L400X
LCD COLOUR TELEVISION
OPERATION MANUAL
Cover_LC-32L400X.indd 1
27/07/10 09:16:39 AM
Cover_LC-32L400X.indd 2
28/06/10 02:16:41 PM
Supplied accessories
Remote control unit
“AA” size battery (g1)
Operation manual
Stand unit
Stand base
Screws (g 4)
Safety restrains
Restraining
band
Screw for
band
Clamps
Screws for
clamps
Contents
Page
Supplied accessories ..............................................1
Dear SHARP customer............................................2
Important Safety Precautions ................................2
Important information .............................................2
Trademarks ..............................................................2
Attaching the stand .................................................3
Antenna connection ................................................3
Connecting external devices ..................................4
Remote control unit ................................................5
Part names ...............................................................6
Turning the TV on/off ..............................................7
Supplying electric power to the antenna ..............7
Initial auto installation .............................................7
Checking Signal information ..................................7
Auto installation .......................................................8
Programme setup ...................................................8
Selecting a preset AV mode .................................10
Menu operation .....................................................10
Picture menu ..........................................................11
Audio menu ............................................................11
Page
ECO menu ............................................................. 12
Setup menu ........................................................... 12
Option menu ......................................................... 14
Digital setup menu ............................................... 16
Programme Guide ................................................ 17
Info ......................................................................... 17
ATV (Analogue/DTV/RADIO buttons) .................. 18
Switching the analogue audio format ................ 18
EPG ........................................................................ 20
Picture and still image ......................................... 21
Wide Mode ............................................................ 21
Teletext function ................................................... 22
PC Control of the TV ............................................ 22
PC compatibility chart ......................................... 23
RS-232C commands list ...................................... 23
Appendix ............................................................... 24
Specifications ....................................................... 25
Protection against overturning ........................... 26
Dimensional drawings.......................................... 26
CLEARING THE PASSWORD ............................... 27
1
LC32L400X_pg01-09_EN.indd 1
27/07/10 09:15:20 AM
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product.
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming
pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting
in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven
floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special
care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue,
green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the
TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal
on the rear of the product.
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the
television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
Important information
This product qualifies for ENERGY STAR when “Home” is selected for “TV location”.
Setting “TV Location” to “Home” allows the TV to achieve an energy-saving status for household use.
Trademarks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC.”
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• Products that have earned the ENERGY STAR® are designed to protect the environment through energy efficiency.
2
LC32L400X_pg01-09_EN.indd 2
29/07/10 09:28:09 AM
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Confirm the screws supplied with the TV.
2
Insert the stand base to the stand post on the
bottom of the TV. (1)
3
Insert and tighten the 4 screws into the 4 holes
on the bottom of the stand base. (2)
5
5
Soft cushion
Screws (m4)
(used in step 3)
Screw
NOTE
• To detach the stand, perform the steps in reverse order.
Screw driver
Antenna connection
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
Room antenna terminal
(75-ohm type)
To antenna
terminal
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
3
LC32L400X_EN.indb 3
7/8/10 6:45:02 PM
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player,
Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV
STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the
INPUT 2/INPUT 3 or INPUT 4 terminals.
When using component cable
When using composite cable or S-VIDEO cable
(commercially available)
(commercially available)
S-VIDEO
Y
PB
(CB)
PR
(CR)
or
L
AUDIO
L
R
AUDIO
VIDEO
R
VCR/Game console/Camcorder
VCR/Game console/Camcorder
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI), INPUT 4 terminals when connecting to a DVD player/Digital TV STB (Set Top
Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
L
DVD player/
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 5 (PC) terminals when
connecting to a PC.
AUDIO
R
DVD player/Digital TV STB (Set Top Box)
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
ANALOG
RGB
Optical fibre cable
(commercially available)
AUDIO
(L/R)
PC
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
4
LC32L400X_EN.indb 4
7/8/10 6:45:03 PM
Remote control unit
13
1
14
15
16
17
18
2
3
4
5
19
20
21
22
6
7
8
23
9
24
10
11
12
25
26
e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level
will be set to 0 automatically. Increase the volume level by
pressing VOL k.
2 0–9
Set the channel.
TELETEXT mode: Set the page. (See page 22.)
3 A (Flashback)
Press A to return to the previous selected channel or
external input mode.
4 WIDE
Change the wide image mode. (See page 21.)
5 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
6 FREEZE
Freeze a motion picture on the screen. (See page 21.)
7 EXIT
Return to the default screen.
8 Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 22.)
9 EPG
DTV mode: To display EPG (Electronic Programme Guide)
screen. (See pages 20 to 21.)
10 GUIDE
DTV mode: Display the programme list. (See page 17.)
1
11 INFO
DTV mode: Display the programme information. (See page 17.)
12 RADIO
Press to access RADIO mode. (See page 18.)
13 POWER (STANDBY/ON)
To switch the power on and off. (See page 7.)
14 DISPLAY
Display the channel or input information.
15 SLEEP
Set the Sleep timer.
0hr.30min.
Off
1hr.00min.
1hr.30min.
2hr.30min.
2hr.00min.
16 AV MODE
Select an audio and video setting. (See page 10.)
17 MPX
Select the sound multiplex mode.
18 TV/VIDEO (INPUT SOURCE)
Select an input source.
19 CHa/CHb
TV input mode: Select the channel.
(CHa) Increase the channel number.
(CHb) Decrease the channel number.
TELETEXT mode: Select the page. (See page 22.)
20 PC
Directly select the PC terminal.
21 MENU
Display the menu screen.
22 a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
23 RETURN
MENU mode: Return to the previous menu screen.
24 m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT
image, TV/TEXT image) (See page 22.)
k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 22.)
[ (SUBTITLE for TELETEXT)
To turn the subtitles on. (See page 22.)
3 (Hold)
TELETEXT mode: Stop updating Teletext pages
automatically. Press 3 again to release the hold mode.
(See page 22.)
1 (Subpage)
Display the Teletext subpage directly when in Teletext
mode. (See page 22.)
v (Top/Bottom/Full)
TELETEXT mode: Set the area of magnification.
(See page 22.)
25 DTV
Press to access DTV mode. (See page 18.)
26 ATV
Press to access ATV mode. (See page 18.)
Inserting the battery
Before using the TV for the first time, insert a “AA” size battery (supplied). When the battery become depleted and
the remote control fails to operate, replace the battery with new “AA” size battery.
1
Open the battery cover.
2
Insert the supplied “AA” size battery.
3
Close the battery cover.
• Place battery with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
CAUTION
• Battery (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
5
LC32L400X_EN.indb 5
7/8/10 6:45:04 PM
Part names
TV (Front)
OPC sensor
Remote control sensor
POWER indicator
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green) The TV is on.
TV (Rear)
1
2
3
4
5
6
7
8
POWER (On/Off) button
MENU button
TV/VIDEO button
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
RS-232C terminal
DIGITAL AUDIO OUTPUT terminal
INPUT 5 (PC) terminals*
9
10
11
12
13
14
15
INPUT 1 (HDMI) terminal*
Antenna input terminal
INPUT 2 terminals
INPUT 3 terminals
INPUT 4 terminals
SERVICE ONLY terminal**
Headphone jack
* The INPUT 1 and INPUT 5 terminals can both use the same analogue audio input terminal. However, the proper item must be
selected in the “PC audio select” menu. (See page 14.)
**Usually do not connect anything to this terminal as it is reserved only for service personnel.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
Volume display when headphones are plugged in
20
6
LC32L400X_EN.indb 6
7/8/10 6:45:05 PM
Turning the TV on/off
Selected item
Yes
Select “Yes” when your antenna is setup and connected independently.
No
Select “No” when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to
a community antenna. (The factory
default setting of this function is “No”.)
Turning on/off the power
• To turn on the power
Description
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1
Press POWER on the TV.
2
Press c/d to select “HOME” or “STORE”,
and then press ENTER.
Press c/d to select your country channels
listed on the screen, and then press ENTER.
Press a/b/c/d to select “DTV”, “ATV” or
“ATV + DTV”, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
Supplying electric
power to the antenna
• The initial auto installation wizard appears.
• Sound system is selectable when the signal search
is set to “ATV” or “ATV + DTV” mode only.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
• HOME: “STANDARD” will be the default value for
the “AV mode” setting.
When you set-up the DTV antenna for the first time, or
connect the antenna to a community antenna, you need
to proceed to set the antenna by following this manual.
• STORE: “DYNAMIC (FIXED)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (FIXED)” when there is no further
change to TV setting for 30 minutes.
• To change the STORE mode to HOME mode,
please refer to page 14 to reset the unit.
Checking Signal
information
1
Press DTV to access DTV mode.
2
Press MENU and the MENU screen displays.
3
Press c/d to select “Setup”.
4
Press a/b to select “Digital programme
setup” and then press ENTER.
5
Press a/b to select “Antenna power” and
then press ENTER.
1
Press MENU and the MENU screen displays.
6
Press c/d to select “Yes” and then press
ENTER.
2
Press c/d to select “Setup”.
3
Press a/b to select “Digital programme
setup”, and then press ENTER.
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
7
LC32L400X_pg01-09_EN.indd 7
29/07/10 10:15:30 AM
Checking Signal
information (Continued)
H Checking Signal information
Press a/b to select “Signal information”.
Auto search
Programme setup
Digital settings
You can reconfigure DTV services settings automatically
or manually.
1 Press MENU and the MENU screen displays.
Manual search
Manual adjust
Signal information
Channel number 68
Antenna power
4
2
Press c/d to select “Setup”.
3
Press a/b to select “Digital programme
setup”, and then press ENTER. If you have
already set the password, enter it here.
Signal strength
Current 100
Signal quality
Maximum 100
Current 98
Maximum 98
Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Signal quality” are obtained.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
Auto installation
You can run auto installation again, even after setting
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Auto installation”, and
then press ENTER.
4
If you have already set the password, enter it
here.
• See page 12 for setting a password.
4
Press a/b to select the desired menu item,
and then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
H Auto search (Digital)
Use this menu to add new services automatically after
auto installation has been completed.
H Manual search (Digital)
Add new services within a specified frequency band.
• Press c/d to select the frequency and then press
ENTER.
H Manual adjust (Digital)
Configure various settings for each service using the
Colour (R, G, B) buttons.
Digital programme setup]
• See page 12 for setting a password.
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press a/b/c/d to select “DTV”, “ATV” or
“ATV + DTV”, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
• Sound system is selectable when the signal search
is set to “ATV” or “ATV + DTV” mode only.
You do not need to do anything during the
auto search. Press MENU to exit.
1
Press a/b to select desired service.
2
Press the colour button on the remote control
corresponding with the item you want to
reconfigure.
• Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Buttons for Manual adjust operation
Menu
items
Lock
Remote
control
buttons
R
CH
Skip
G
Sort
B
Description
When the service is locked,
you must enter your password
whenever you tune to the service.
Services with “Skip” are passed
over when pressing r/s in the
TV/remote control unit.
The item position of services can be
sorted.
8
LC32L400X_pg01-09_EN.indd 8
29/07/10 10:15:32 AM
Programme setup (Continued)
The item position of services can be sorted
1 Press a/b to select the service whose item
position you want to move, and then press B.
DTV
005
Maori Television
DTV
022
Parliament TV
DTV
100
Freeview I HD
2 Press a/b to move it to the desired position, and
then press ENTER.
DTV
100
Freeview I HD
DTV
022
Parliament TV
DTV
005
Maori Television
3 Repeat steps 1 and 2 until all desired service
items are sorted.
Analogue settings
5
Press a/b to select the desired menu, and
then press ENTER.
6
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Search
The next channel will be search in order.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you can
set by directly entering the frequency number of the channel
with 0 — 9.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Colour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 4.43, PAL-60)
Sound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (B/G, D/K, I)
Label
To enter the name of the channel. Maximum 5
alphanumeric can be input.
3
Press a/b to select “Analogue programme
setup”, and then press ENTER.
• Press a/b/c/d: To select a desired alphanumeric, and
then press ENTER.
Repeat until the name is fully spelt out.
4
If you have already set the password, enter it
here.
H Auto search (Analogue)
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Search
• See page 12 for setting a password.
Colour system [ Auto ]
Sound system [ B/G ]
Label
5
Press a/b to select “Auto search”, and then
press ENTER.
6
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search. Press MENU to exit.
H Manual adjust (Analogue)
You can set some channel item manually.
1
Repeat steps 1 to 4 in Auto search.
2
Press a/b to select “Manual adjust”, and
then press ENTER.
3
Press c/d to select “Yes”, and then press
ENTER.
4
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
Broadcasting station name settings
Fine
[
]
Booster
[ Off ]
Skip
[ Off ]
Lock
[ Off ]
A B C D E F G H I J CLEAR
KLMNOPQRST BACK
UVWXYZ+–._
0 1 2 3 4 5 6 7 8 9 END
• To exit, select END and then press ENTER.
• If the wrong alphanumeric is entered, select CLEAR to
clear, and then press ENTER.
Booster
Enhance the picture quality during weak signal. It is
not recommended to turn on during strong signal
condition. It may induced unwanted noise. (On, Off)
Skip
Channels with “Skip” set to “On” are passed over when
using CHr/s even if selected while watching the image
from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See “Child lock” for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and the
image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been activated”
is displayed, password input menu will be displayed. Inputting
the correct password lifts the child lock temporarily until the
power is turned off.
9
LC32L400X_EN.indb 9
7/8/10 6:45:09 PM
Programme setup (Continued)
H Sort (Analogue)
Channel position can be sorted freely.
1
Repeat steps 1 to 4 in Auto search.
2
Press a/b to select “Sort”, and then press
ENTER.
3
Press c/d to select “Yes”, and then press
ENTER.
4
Press a/b/c/d to select the channel you
want to move, and then press ENTER.
5
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
6
Repeat the steps 4 and 5 until all desired
channels are sorted.
H Erase programme (Analogue)
The individual programme can be erased.
Selecting a preset AV
mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
1
Press AV MODE.
2
Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” menu screen.
Selected item
STANDARD
MOVIE
GAME
PC
1
Repeat steps 1 to 4 in Auto search.
USER
2
Press a/b to select “Erase programme”, and
then press ENTER.
DYNAMIC
(FIXED)
3
Press c/d to select “Yes”, and then press
ENTER.
DYNAMIC
4
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
5
Press ENTER to erase the channel.
6
Repeat the step 4 and 5 until all desired
channels are erased.
Description
For a highly defined image in a normally
bright room.
For a movie.
For game play.
For PC. (Available only when inputting an
HDMI or PC signal.)
Allows the user to customise settings as
desired. You can set the mode for each
input source.
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
For a clear-cut image emphasising high
contrast for sports viewing.
NOTE
• You can select a different AV mode item for each input mode.
(For example, select STANDARD for TV input and DYNAMIC for
VIDEO input.)
• During PC input mode, only “STANDARD”, “PC” and “USER”
can be selected under the AV mode selection.
Menu operation
1
Press MENU and the MENU screen displays.
2
Press c/d to select the desired menu.
(Picture, Audio, ECO, Setup, Option, Digital
setup)
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
10
LC32L400X_EN.indb 10
7/8/10 6:45:11 PM
Picture menu
Picture
ECO
Audio
[ STANDARD]
AV mode
[ Off]
OPC
Backlight
[ +16 ] –16
+16
Contrast
[ +30 ]
0
+40
Brightness
[
0 ] –30
+30
Colour
[ + 4 ] –30
+30
Tint
[
0 ] –30
+30
Sharpness
[ + 2 ] –10
+10
Advanced
Active contrast
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal type.
• 3D-Y/C may not operate depending on the input signal type
or noisy input signal.
Monochrome
For viewing images in monochrome. (On, Off)
Reset
H OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Selected item
Description
On:Display
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On
Automatically adjusts.
Off
The brightness is fixed at the value set in
“Backlight”.
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
Audio menu
STANDARD
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
H Picture adjustments
Selected item
Setup
ECO
Audio
NOTE
c button
Treble
[
0] –15
Bass
[
0] –15
+15
Balance
[
0]
R
+15
L
[Off ]
Surround
Reset
d button
Backlight
The screen dims
The screen brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
H Audio adjustments
Selected item
c button
d button
Tint
Skin tones become
purplish
Skin tones become
greenish
Treble
Bass
For weaker bass
Sharpness
For less sharpness
For more sharpness
Balance
Decrease audio from Decrease audio
the right speaker
from the left speaker
H Advanced
Colour temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with bluish tone
White with reddish tone
Film mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still film
frame for high-definition picture quality. (On, Off)
For weaker treble
For stronger treble
For stronger bass
H Surround
When you set to “On”, you can enjoy surround sound,
the same as if you were in a movie theatre.
Selected item
Description
On
Makes it possible to enjoy natural, realistic
surround sound.
Off
Outputs the normal sound.
NOTE
• For resetting all Audio adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
11
LC32L400X_EN.indb 11
7/8/10 6:45:12 PM
ECO menu
Setup menu
Setup
ECO
No signal off
Setup
Option
4 Analogue programme setup
4 Power management
No operation off
Digital setup
Option
Auto installation
[ Enable]
Digital programme setup
[ 3hr.]
Child lock
Ecology
Input skip
4 Input label
Position
4 HDMI auto view
WSS
4:3 mode
H No signal off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• “Disable” is the factory preset value.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
H Power management (PC input mode only)
You can set the TV to automatically power off when no
image is displayed on PC.
Selected item
Description
Off
• No power management
• Factory preset value.
Mode1
• If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 7.)
Mode2
Quick start
Text language
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• “Disable” is the factory preset value.
H Ecology
When set to “Yes”, the TV activates the following
power saving mode.
• “OPC” set to “On” (Page 11)
• “No signal off” set to “Enable” (Page 12)
• “Power management” set to “Mode1” (Page 12)
• “No operation off” set to “3 hr.” (Page 12)
• “Quick start” set to “Off” (Page 14).
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
[ Off]
[ West Europe]
Identification
Reset
H Child lock (ATV and DTV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1 Repeat steps 1 to 2 in Menu operation.
2
Press a/b to select “Child lock”, and then
press ENTER.
3
If you already set the password, enter it here.
4
Press a/b to select “Change password”, and
then press ENTER.
5
Enter the 4-digit number as a password using
0 — 9.
Change password
• If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 7.)
H No operation off
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
[On]
[Panorama]
Enter your new password. Use 4 digits
Clear password
Parental rating
New password – – – –
Reconfirm – – – –
6
Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel (Lock setting in Analogue
programme setup “Manual adjust” is set to “On”), you must
enter a password. When you select a locked channel, “Child
lock has been activated” is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allow you to clear your password.
1 Repeat steps 1 to 3 in Setting a password.
2
Press a/b to select “Clear password”, and
then press ENTER.
3
Press c/d to select “Yes”, and then press
ENTER.
12
LC32L400X_EN.indb 12
7/8/10 6:45:14 PM
Setup menu (Continued)
Parental rating
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
H Input label
You can assign each input source a label as you
prefer.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
1
Repeat steps 1 to 3 in Setting a password.
2
Press a/b to select “Parental rating”, and
then press ENTER.
3
Press c/d to select “Setup”.
3
Press a/b to select your desired rating, and
then press ENTER.
4
Press a/b to select “Input label”, and then
press ENTER.
5
Press a/b/c/d to select a desired
alphanumeric, and then press ENTER. Repeat
until the name is fully spelt out. Maximum 6
alphanumeric can be input.
When the country setting is set to “Australia”.
Selected item
General and
above (G)
Parental
guidance and
above (PG)
Mature and
above (M)
Description
Content is not offensive to most viewers.
Content is such that parents may not want
their children to view the programme.
Mature audience only. This programme is
specifically designed to be viewed by adults
and therefore may be unsuitable for children
under 15.
Mature adult Mature adult only. Mature audience only.
and above
This programme is specifically designed to
(MA)
be viewed by adults and therefore may be
unsuitable for children under 15.
Adult violence Not for children under age 15. Strong
(AV)
elements of sex and/or violence.
Restricted
Not for children under age 18. Strong
and above (R) elements of sex and/or violence.
No block (–)
Cancel the blocking.
When the country setting is set to “New Zealand” or
“Singapore”.
A B C D E F G H I J CLEAR
KLMNOPQRST BACK
UVWXYZ+–._
0 1 2 3 4 5 6 7 8 9 END
To exit, select END and then press ENTER.
If the wrong alphanumeric is entered, select
CLEAR to clear and then press ENTER.
NOTE
• You cannot change labels if the input source is ATV and
DTV.
H Position
For adjusting a picture’s horizontal and vertical
position.
Selected item
H-Position
Block 5 age and below
Block 11 age and below
Block 13 age and below
Block 15 age and below
Block 17 age and below
Block 18 age and below
No block
V-Position
Reset
Description
Centres the image by moving it to the left
or right.
Centres the image by moving it up or
down.
Reset position to factory preset values.
H HDMI auto view (HDMI input mode only)
Selected item
H Input skip
This setting allows you to skip the HDMI or RGB input
on the input source selection operation.
INPUT1(HDMI)
External equipment name settings
Skip input selection of HDMI
INPUT5(RGB)
Yes
No
Enable/
Disable
Description
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
H WSS
WSS allows a television to switch automatically among
the different screen formats. (On, Off)
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• Not available for COMPONENT, PC and HDMI signal.
13
LC32L400X_EN.indb 13
7/8/10 6:45:15 PM
H 4:3 mode
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Selected item
Panorama
Normal
Option menu
Option
Description
Digital setup
Input select
Wide image without side bars
Normal range keeping 4:3 or 16:9 aspect
ratio
PC audio select
Auto volume
Digital audio output
[HDMI1]
[On]
[PCM]
Audio only
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
4 Game play time
4 Colour system
4 Fine sync.
Version up
H Input select
For setting the signal type of external equipment.
H Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Selected item
On
Off
Description
The TV quickly starts up from standby,
8.5W or more of power consumption is
required during standby.
Power consumption is less than 1W.
H Text language
Select from among 3 kinds of language: West Europe,
Arabic, Farsi.
NOTE
Input source
INPUT2
H PC audio select
When using the INPUT5 terminal or HDMI1 terminal,
you must select which terminal uses the AUDIO (R/L)
jack for analogue audio input.
Selected item
HDMI1
INPUT5 (RGB)
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
H Identification
You can check the current version of the software on the
screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture,
Audio and Programme will be reset to the factory preset
values.
Selectable item
Auto, S-VIDEO, VIDEO
Description
When connecting devices (including a
PC) with DVI/HDMI cable to the INPUT1
terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
When connecting a PC to the INPUT5
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must set this to “INPUT5(RGB)” when connecting devices
(including a PC) with an HDMI-certified cable to the INPUT 1
terminal. If “HDMI1” is set, there will be no sound output.
H Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H Digital audio output
This function allows you to select your favourite audio
output system.
Selected item
Description
PCM
The optical output format is normally in
PCM.
Dolby Digital
Dolby Digital audio will be output when
there is a Dolby Digital audio signal.
The output will be in PCM when there
is no Dolby Digital audio signal.
14
LC32L400X_pg10-17_EN.indd 14
29/07/10 09:34:31 AM
Option menu (Continued)
H Audio only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Selected item
H-Position
V-Position
NOTE
• When you make operations that change the picture on the TV
such as by changing the input source, the Audio only function
is set to “Off”.
H Game play time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected
to the game console before starting the game.
Selected item
On
Off
Clock
Phase
Description
Centres the image by moving it to the left
or right.
Centres the image by moving it up or
down.
Adjusts when the image flickers with
vertical stripes.
Adjusts when characters have low contrast
or when the image flickers.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
Description
The elapsed time is displayed every
30 minutes when you switch to GAME
mode in external input mode.
Hides the time.
H Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto, PAL,
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
Input signal
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1280 g 768
1360 g 768
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL).
• “Colour system” is selectable only when inputting an
S-VIDEO or composite signal.
H Version up
This function is only for service personnel to use for
software updates.
H Fine sync. (PC input mode only)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before
starting Auto sync.
15
LC32L400X_pg10-17_EN.indd 15
29/07/10 09:35:10 AM
Digital setup menu
Option
Set “Hearing impaired” to “On”
(Hearing impaired)
1st Language
Digital setup
Off
Audio language
2nd Language
••••••••
Subtitle language
Hearing impaired
Set “Hearing impaired” to “Off”
[Off]
Time zone
Summer time
[Off]
OAD setup
[Off]
1st Language
Off
H Selecting the language
Set up to two preferred multi audio languages to
display if the audio languages are available.
••••
2nd Language
(Hearing impaired)
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtitles.
H Time zone
This function enables you to select your local time zone.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital setup”.
1
Press MENU and the MENU screen displays.
3
Press a/b to select “Audio language”, and
then press ENTER.
2
Press c/d to select “Digital setup”.
4
Press a/b to select “1st Language” or “2nd
Language”, and then press ENTER.
3
Press a/b to select “Time zone”, and then
press ENTER.
5
Press a/b/c/d to select the desired
language, and then press ENTER.
4
Press c/d to select the desired time zone
and then press ENTER.
NOTE
• If audio for the selected languages is not included in
a received broadcast, audio will not be output for that
language.
H Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital setup”.
3
Press a/b to select “Subtitle language”, and
then press ENTER.
4
Press a/b to select “1st Language” or “2nd
Language”, and then press ENTER.
5
Press a/b/c/d to select the desired
language, and then press ENTER.
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
H Summer time
When the Summer time is set to “On”, the Standard
Time is plus one hour. (Auto, On, Off)
H OAD setup
• This function is for automatically download the
data for the version update software over digital
broadcasts when the “OAD setup” is set to “On”.
• To download, follow the instructions when the
download message appears during a digital
broadcast.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
H Switching subtitle languages (DVB Subtitle)
Each time you press [ on the remote control, the
subtitle switches when the broadcast contains subtitle
information.
16
LC32L400X_pg10-17_EN.indd 16
16/07/10 03:16:18 PM
Programme Guide
Info
You can check the current schedule of DTV events
and view detailed information about current events.
1
Press GUIDE to display the programme guide
list.
2
Press a/b to display your desired
programme, and then press ENTER.
While watching DTV you can check the extended
programme information on the screen using INFO on
the remote control.
1
2
3
• When you press ENTER, the TV jumps to the
channel.
Channel list
020
4
5
6
[Mon.] 18/6 13:27
ABC HDTV
13:23 - 13:30
Dorothy The Dinosaur
002 ABC TV Sydne
Dorothy The Dinosaur
020 ABC HDTV
Dorothy The Dinosaur
021 ABC2
Gardening Australia
022 ABC TV
Dorothy The Dinosaur
ABC2
People Dimensions
13:30 - 14:00
Input Info.
Video : 576i
Audio : MPEG
Age :
09
General INFO screen
1 Station name
2 Title
3 Time for the current programme
Select channel
Page up/down
ENTER
: Enter RETURN : Back MENU Exit
R Program informati..
3
Press R to view programme information.
4
Press RETURN or MENU to exit.
4 Video system
5 Audio system (Dolby D or MPEG)
6 Parental rating
• If there is more information, pressing a/b allows you to go
to the next page or return to the previous page.
• You can cancel this info by pressing INFO or EXIT.
17
LC32L400X_pg10-17_EN.indd 17
16/07/10 03:16:21 PM
ATV (Analogue)/DTV/
RADIO buttons
Use the following buttons on the remote control to
operate the menu.
DTV
When the TV accesses to DTV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1
To watch DTV broadcasts, select “DTV” from
auto installation menu. (See page 8.)
2
After setting the channels, you can select
a channel using CH r/s or 0 – 9 on the
remote control unit. (See page 5.)
Switching the analogue
audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
BBC1
ATV: Press to switch to ATV mode. After switching
from DTV, radio or external input mode to ATV
mode, the TV jumps to the most recently viewed ATV
channel.
DTV: Press to switch to DTV mode. After switching
from ATV, radio or external input mode to DTV
mode, the TV jumps to the most recently viewed DTV
channel.
RADIO: Press to switch to radio mode. After switching
from DTV, ATV or external input mode to radio mode,
the TV jumps to the most recently tuned radio channel.
When you watch the TV for the first time
When the TV powers on for the first time after
purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
2
To watch the analogue TV, select “Auto
installation” from Setup menu. (See page 8.)
After setting the channels, you can select
a channel using CH r/s or 0 – 9 on the
remote control unit. (See page 5.)
ATV
PAL
NICAM
01
B/G
STEREO
BBC1
ATV
PAL
01
B/G
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
BBC1
ATV
PAL
NICAM
01
B/G
CH A
BBC1
ATV
01
PAL
NICAM
B/G
CH B
BBC1
ATV
PAL
BBC1
01
ATV
01
B/G
MONO
PAL
NICAM
B/G
CH AB
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
BBC1
ATV
01
PAL
NICAM
B/G
MONO
BBC1
ATV
PAL
01
B/G
MONO
18
LC32L400X_pg18-28_EN.indd 18
19/07/10 01:42:36 PM
Switching the analogue
audio format (Continued)
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
BBC1
ATV
PAL
BBC1
ATV
01
B/G
STEREO
PAL
01
B/G
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
BBC1
ATV
PAL
BBC1
01
ATV
B/G
CH A
PAL
01
B/G
CH B
BBC1
ATV
PAL
01
B/G
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
BBC1
ATV
PAL
01
B/G
MONO
NOTE
• “BBC1”, “01” and “PAL” are tentative network name,
channel and colour system.
19
LC32L400X_EN.indb 19
02/08/10 09:08:27 AM
20, 21
EPG
What is an EPG?
An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG
is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote
control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a
programme, do timer view the programme schedule in detail.
Basic Operation
H Display the EPG screen
1 Press EPG.
[Tue.] 19 [Wed.] 20 [Thurs.] 21 [Fri.] 22 [Sat.] 23
002
ABC TV Sydney
[Sun.] 24 [Mon.] DTV
Play School
13:30 - 13:55
13:30
ABC TV Syd..002
Play School
...
ABC HDTV
020
Play School
...
ABC2
021
People Dimensions
ABC TV
022
Play School
14:30
2
Australia Wide
...
3
: Select
ENTER
: Enter
MENU
: End
R
Previous d..
G
Next day
Y
Schedule
B
Reminder
2
2 Press c/d/R/G to select the time span you want to search.
• Continue to press d to display programmes in the next time span.
3 Press a/b to select the desired programme.
H Close the EPG screen
4 Press EPG again or MENU to exit.
NOTE
• For “New Zealand delivery model”, the EPG screen and operation differ due to the use of MHEG EPG. The EPG screen and
operation vary depending on the broadcasts.
Reminder timer setting
You can schedule a reminder for future programmes. Channel will automatically change on time as scheduled.
1
Press EPG.
2
Press a/b/c/d/R/G to select the programme you want to watch.
3
Press B to set reminder time.
4
Press ENTER to save reminder timer.
• “Timer Save Success” will display.
NOTE
• “Timer Overlap” will display if same time is set twice.
• “Timer Past” will display if past time is set.
5
Press ENTER to display the reminder schedule list.
6
Press MENU or EPG to exit.
20
LC32L400X_pg18-28_EN.indd 20
29/07/10 10:20:48 AM
EPG (Continued)
Wide Mode
Viewing the reminder schedule list
Auto Selection
1
Press EPG.
2
Press Y to display the reminder schedule list.
3
Press a/b to display next or previous screen.
4
Press MENU or EPG to exit.
If you set “WSS” and “4:3 mode” in the Setup menu,
the optimum WIDE mode is automatically chosen for
every broadcast containing the WSS information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 13.)
“4:3 mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 mode menu. (See page 14.)
Cancelling the reminder timer setting
1
Press EPG.
4:3 mode set to “Panorama”
2
Press Y to display the reminder schedule list.
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is enabled.
3
4
Press a/b to select a programme you want
to cancel.
Press R to delete a programme from reminder list.
5
Press MENU or EPG to exit.
NOTE
Picture and still image
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
1
Press WIDE.
2
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
You can freeze a motion picture on the Display.
1
2
4:3 mode set to “Normal”
• As you toggle down the options, each mode is
immediately reflected on the TV.
Press FREEZE.
• A still image displays.
Press FREEZE or RETURN again to exit still
image.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
Selected item
Normal
For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom14:9
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama
In this mode the picture is progressively
stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Underscan
Display with an Underscan image only
when receiving a 720p/1080i/1080p signal.
Display with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn’t function for PC input (all resolution).
Description
NOTE
• Some picture size may not be displayable depending on the
input signal.
21
LC32L400X_EN.indb 21
7/8/10 6:45:23 PM
Teletext function
PC Control of the TV
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are among
the many services available.
Turning on and off Teletext
a TV channel or external input source
1 Select
providing the Teletext programme.
2
Press m to display the Teletext.
3
Each time you press m, the screen switches
as shown below.
TELETEXT
TELETEXT
NOTE
• If you select a programme with no Teletext signal,
“No teletext available.” is displayed.
• The same message displays during other modes if
no Teletext signal is available.
• New Zealand delivery model can receive MHEG
data broadcasting.
Button functions
Buttons
Description
CH (r/s)
Increase or decrease the page number.
Colour
(Red/Green/
Yellow/Blue)
You can select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
0—9
Directly select any page from 100 to 899
by using 0 — 9.
v (Top/
Bottom/Full)
Switch the Teletext image to Top, Bottom
or Full.
k (Reveal
hidden
TELETEXT)
To reveal hidden information such as an
answer to a quiz.
3 (Hold)
To stop updating Teletext pages
automatically or release the hold mode.
Display the subtitle during Teletext page.
[ (Subtitle
for TELETEXT) • Subtitle will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
• When a programme is set, the TV can be controlled from
the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume
can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed
playing.
• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the communications conditions of the TV.
The communications settings of the TV are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
9,600 bps
8 bits
None
1 bit
None
Communication procedure
Send the control commands from the PC via the RS232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3
Command 4-digits
Parameter 4-digits
Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
Parameter
Input the parameter values, aligning left, and fill with
space(s) for the remainder. (Be sure that four values
are input for the parameter.)
When the input parameter is not correct, “ERR”
returns. (Refer to “Response code format”.)
0
0
0
0
9
a
3
0
Response code format
Normal response
Display the subpage during Teletext page.
O
NOTE
• Teletext can display only when it is sent by network. Not
used to convert between languages.
P4
K
Return code (0DH)
Problem response (communication error or incorrect command)
E
R
R
Return code (0DH)
22
LC32L400X_EN.indb 22
7/8/10 6:45:24 PM
PC compatibility chart
Resolution
640 g 480
VGA
Horizontal
Frequency
Vertical
Frequency
Analogue
(D-Sub)
Digital (HDMI)
VESA Standard
31.5 kHz
60 Hz
✔
✔
✔
SVGA
800 g 600
37.9 kHz
60 Hz
✔
✔
✔
XGA
1024 g 768
48.4 kHz
60 Hz
✔
✔
✔
WXGA
1360 g 768
47.7 kHz
60 Hz
✔
✔
✔
NOTE
• This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the
VESA 60Hz standard. Any variations from this standard will result in picture distortions.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range
indicated in brackets under CONTROL CONTENTS.
23
LC32L400X_pg18-28_EN.indd 23
13/07/10 05:41:42 PM
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
• No power.
• Unit cannot be operated.
• Remote control unit does
not operate.
• Picture is cut off.
• Strange colour, light
colour, or dark, or colour
misalignment.
• Power is suddenly turned
off.
• No picture.
• No sound.
• The TV sometimes makes
a cracking sound.
Possible Solution
• Check if you pressed POWER on the remote control unit. (See page 7.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 7.)
• External influences such as lightning, static electricity, etc., may cause improper operation. In
this case, operate the unit after first turning the power off the TV or unplugging the AC cord
and re-plugging it in after 1 or 2 minutes.
• Is battery inserted with polarity (e, f) aligned? (See page 5.)
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Is the image position correct? (See page 15.)
• Are screen mode adjustments such as picture size made correctly? (See pages 14 to 15.)
• Adjust the picture tone. (See page 11.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 11, 15.)
• Check the input signal setting. (See page 15.)
• Check the HDMI auto view setting. (See page 13.)
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See page 12.)
• Is the sleep timer set? (See page 5.)
• Is the connection to external equipment correct? (See page 4.)
• Has the input signal setup been performed correctly after connection? (See page 7.)
• Is the correct input selected?
• Is the picture adjustment correct? (See page 11.)
• Is the antenna connected properly? (See page 3.)
• Is “On” selected in “Audio only”? (See page 15.)
• Is the volume too low? (See page 5.)
• Make sure that headphones are not connected.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
24
LC32L400X_pg18-28_EN.indd 24
19/07/10 09:01:17 AM
Specifications
Model
Item
LC-32L400X
LCD panel
31.5o (800 mm) Advanced Super View & BLACK TFT LCD
Resolution
1,049,088 pixels (1366 g 768)
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1
DVB-T
44.25—863.25 MHz
S1—S41ch (including Hyperband)
Auto Preset 99 ch
NICAM: B/G, I, D/K A2 stereo: B/G
60,000 hours (at Backlight Standard position)
H : 176º V : 176º
Video Colour System
TV
TV- Standard
Function
Analogue
Digital
Receiving
VHF/UHF
Channel
CATV
TV-Tuning System
STEREO/BILINGUAL
Backlight life
Viewing angles
Audio amplifier
10 W g 2
9 g 5 cm 2pcs
Speakers
UHF/VHF 75 q DIN type
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/24Hz, 1080P/50Hz, 1080P/60Hz), AUDIO in ( 3.5 mm jack)
INPUT 2
S-VIDEO in, VIDEO in, AUDIO in
INPUT 3
VIDEO in, AUDIO in
INPUT 4
AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz,
1080I/50Hz, 1080I/60Hz)
INPUT 5 (PC input) 15 pin mini D-sub, AUDIO in (common use with INPUT 1) ( 3.5 mm jack)
RS-232C
9 pin D-sub male connector
Digital Audio Output Optical Digital Audio Output
Headphone
φ 3.5 mm stereo
OSD language
English
Power Requirement
AC 110 — 240 V, 50/60 Hz
Power Consumption
119 W (0.9 W Standby)
without stand
797 (W) g 535 (H) g 115 (D) mm
Dimensions
with stand
797 (W) g 580 (H) g 262 (D) mm
without stand
10.0 kg
Weight
with stand
11.0 kg
Operating Temperature
0°C — 40°C
Terminals
Rear Antenna input
INPUT 1
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Optional accessory
• Additional optional accessories may be available in the near future.
When purchasing, please read the newest catalogue for compatibility
and check the availability.
Part name
Model number
Wall mount bracket
AN-37AG5
CAUTION
• This TV should be mounted on the wall only with the AN-37AG5 (SHARP) wall mount bracket. The use of other wall mount
brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
25
LC32L400X_pg18-28_EN.indd 25
29/07/10 09:35:51 AM
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
1
2
View from the top
Fix the product with the 2 clamps
(supplied), using the screws (supplied).
Cup hook (commercially available) Tie (commercially available)
Wall
Fix the TV to the wall using extrastrong
ties (commercially available).
Clamps
(supplied)
Fixing the TV to the table
1
Lay the TV down on cushioning
(such as a blanket) over a table.
2
Attach the band (supplied) to
the bottom of the stand using
the screw (supplied).
Transfer the product to the table
where you intend to fix the TV.
Screws for attaching clamps (supplied)
5
3
4
Restraining band
(supplied)
5
5
5
Screw
(commercially
available)
Table
Thick soft cloth
Stand
(ex. Blanket)
Fix the TV to the table by
the band with a screw
(commercially available).
Screw for
band
(supplied)
Table
Restraining band
(supplied)
• Use a screw (commercially available)
whose shape is compatible with the
band.
CAUTION
• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the
product’s weight. The table should be set where it will not be overturned.
Dimensional drawings
Unit: mm
451
200
797
200
43.7
580
POWER
MENU
TV
VIDEO
CH
334
393.8
535
699.2
VOL
92 115
262
26
LC32L400X_pg18-28_EN.indd 26
16/07/10 03:23:23 PM
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1
Press MENU to display the MENU screen, and then press c/d to
select “Setup”.
2
Press a/b to select “Child lock”, and then press ENTER and the
password input screen display.
3
If you enter “3001” using 0 – 9, the “Child lock” setting menu will
be displayed.
4
Enter the 4-digit number as a password using 0 – 9. The new
password is now set.
The Password is
.
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
27
LC32L400X_EN.indb 27
7/8/10 6:45:28 PM
Memo
LC32L400X_pg18-28_EN.indd 28
19/07/10 10:45:13 AM
Cover_LC-32L400X.indd 3
28/06/10 02:16:41 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement