Weslo | Cadence 715 Treadmill | User`s manual | Weslo Cadence 715 Treadmill User`s manual

ORDERING REPLACEMENT PARTS
®
To order replacement parts, contact the ICON Fitness Lifestyle Ltd. office, or write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
Model No. WETL71590
Serial No.
Tel: Country Code: 0345-089009
Fax: 0113-2411120
To help us assist you, please be prepared to give the following information:
Write the serial number in the
space above for future reference.
Class H C
Fitness Product
Serial Number Decal
• The NAME of the product (WESLO® CADENCE 715 treadmill)
• The MODEL NUMBER of the product (WETL71590)
• The PART NUMBER of the part (see the EXPLODED DRAWING and PART LIST attached in the centre of this
manual)
• The DESCRIPTION of the part (see the EXPLODED DRAWING and PART LIST attached in the centre of this
manual).
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfaction through our Customer
Service Department.
Please CALL:
0345-089009
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
CAUTION
WESLO® is a registered trademark of ICON Health & Fitness, inc.
Part No. 153470 R0499A
Printed in Canada © 1999 ICON Health & Fitness, Inc.
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: A PART LIST and an EXPLODED DRAWING are attached in the centre of this manual. Remove the PART
LIST and EXPLODED DRAWING before beginning assembly.
Cool-down
Exercise Frequency
Finish each workout with 5 to 10 minutes of stretching
to cool down. This will increase the flexibility of your
muscles and will help prevent post-exercise problems.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months, you may complete up to five workouts each week if desired. The
key to success is to make exercise a regular and
enjoyable part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown in the
drawings below. Move slowly as you stretch—never bounce.
1
1. Toe Touch Stretch
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read
the following important precautions and information before operating the treadmill.
10. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose
clothing that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
manual.
3. Place the treadmill on a level surface, with 8
feet (2 m) of clearance behind it. Do not place
the treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for both legs. Stretches:
Hamstrings, lower back and groin.
3
3. Calf/Achilles Stretch
11. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 7),
plug the power cord into an earthed circuit.
No other appliance should be on the same
circuit. When replacing the fuse, an ASTA
approved BS1362 type should be fitted to the
fuse carrier; a 13 amp fuse should be used.
4. When choosing a location for the treadmill,
make sure that the location and position permits access to the plug.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
12. If an extension cord is needed, use only a 14gauge cord of 5 feet (1,5 m) or less in length.
13. Keep the power cord away from heated surfaces.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
14. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.)
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
8. The treadmill should not be used by persons
weighing more than 250 pounds (115 kg).
15. Never start the treadmill whilst you are standing on the walking belt. Always hold the
handrails whilst using the treadmill.
9. Never allow more than one person on the
treadmill at a time.
2
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for both legs. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for both legs. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
15
5
CONDITIONING GUIDELINES
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed of the treadmill until
your heart rate is near one of the lower two numbers in
your training zone.
WARNING: Before beginning
this or any exercise program, consult your
physician. This is especially important for
individuals over the age of 35 or individuals
with pre-existing health problems.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed of the treadmill until your heart rate is
near the higher number in your training zone.
The following guidelines will help you to plan your
exercise program. Remember—these are general
guidelines only. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
HOW TO MEASURE YOUR HEART RATE
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.
To measure your
heart rate, stop
exercising and
place two fingers
on your wrist as
shown. Take a sixsecond heartbeat
count, and multiply
the result by ten to
find your heart
rate. (A six-second count is used because your heart
rate drops quickly when you stop exercising.) If your
heart rate is too high or too low, adjust the speed of
the treadmill accordingly.
WORKOUT GUIDELINES
Each workout should include the following three parts:
Warming Up
To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers to
the right of your age. The three numbers are your raining zone. The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
21. Inspect and tighten all parts of the treadmill
every three months.
16. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
22. Never insert or drop any object into any
opening.
17. Never leave the treadmill unattended whilst it
is running. Always remove the key when the
treadmill is not in use.
23. Do not attempt to modify the incline of the
treadmill by placing objects under the front
or rear of the treadmill.
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 10.) You must be
able to safely lift 45 pounds (20 kg) to raise,
lower, or move the treadmill.
24. DANGER: Always unplug the power cord
before performing the maintenance and
adjustment procedures described in this
manual. Never remove the motor hood
unless instructed to do so by an authorised
service representative. Servicing other than
the procedures in this manual should be performed by an authorised service representative only.
19. When moving the treadmill or folding the
treadmill to the storage position, make sure
that the storage latch is fully closed.
20. The roller guards must be 1/8 inch (3 mm)
from the rear roller (see the drawing on page
4). Unplug the power cord and adjust the
roller guards, if necessary.
25. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
WARNING:
Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
Refer to the drawing at the right. Locate
the indicated warning decal on the treadmill. If the warning decal is missing, or if
it is not legible, please call our Customer
Service Department to order a free
replacement decal. Apply the decal in the
location shown.
Decal
Start each workout with 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
Training Zone Exercise
After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exercise—never hold your breath.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body
14
3
PROBLEM: THE WALKING BELT SLOWS WHEN WALKED ON
BEFORE YOU BEGIN
Thank you for selecting the WESLO® CADENCE 715
treadmill. The CADENCE 715 treadmill combines
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE 715 can
be folded up, requiring less than half the floor space of
other treadmills.
please call our Customer Service Department at
0345-089009. To help us assist you, please note the
product model number and serial number before calling. The model number of the treadmill is WETL71590.
The serial number can be found on a decal attached
to the treadmill (see the front cover of this manual for
the location).
Before reading further, please review the drawing
below and familiarise yourself with the parts that are
labelled.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
SOLUTION: a. If an extension cord is needed, use only a 14-gauge general-purpose three cord of able of 5 feet
(1,5m) or less in length.
b. If the walking belt still slows when walked on, please call our Customer Service Department.
PROBLEM: THE WALKING BELT IS OFF-CENTRE
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the
walking belt is centred.
a
Water Bottle Holder
(Bottle not included)
Speed Control
Accessory Tray
Console
Handrails
Storage Latch
Key/Clip
SOLUTION: b If the walking belt has shifted to the right, first
remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the rear roller adjustment
bolt counterclockwise 1/4 of a turn. Plug in the power
cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred.
FRONT
Walking Belt
Circuit Breaker
Foot Rails
Roller Guards
BACK
Rear Roller
Adjustment Bolt
RIGHT SIDE
4
13
b
MAINTENANCE AND TROUBLE-SHOOTING
ASSEMBLY
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department.
Before beginning assembly, carefully read the
following information and instructions:
shipping, a small amount of lubricant may be
transferred to the top of the walking belt or the
shipping carton. This is a normal condition and
does not affect treadmill performance. If there is
lubricant on top of the walking belt, wipe off the
lubricant with a soft cloth and a mild, non-abrasive cleaner.
PROBLEM: THE POWER DOES NOT TURN ON
• Assembly requires two people.
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See HOW TO PLUG IN
THE POWER CORD on page 7.) If an extension cord is needed, use only a 14-gauge cord of
five feet (1,5 m) or less in length.
• Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
The following tools (not included) are required
for assembly:
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped.
To reset the circuit breaker, wait for five minutes
and then press the switch back in.
• As you assemble the treadmill, be sure that all
parts are oriented as shown in the drawings.
c
• Two (2) adjustable spanners
• Note: The underside of the treadmill walking belt
is coated with high-performance lubricant. During
Reset
Tripped
Tripped
Reset
PROBLEM: THE POWER TURNS OFF DURING USE
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing
above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console.
PROBLEM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
SOLUTION: a. Check the batteries in the console. If the batteries need to be replaced, see assembly step 6 on
page 6. Most problems are the result of drained batteries.
12
1. With the help of a second person, carefully lay the
treadmill on its side. Position one of the Base Legs
(55) on the base of the Upright (37) as shown. Make
sure that the Base Leg Pads (31) and the Wheel
(34) are in the indicated positions. Attach the Base
Leg with two of the four Base Leg Bolts (28), Base
Leg Washers (68), and Base Leg Nuts (61).
1
68
61
With the help of a second person, carefully raise the
treadmill to the upright position so the Base Legs
(55) are resting flat on the floor.
17
14
31
37
Top View
9
8
1/8”
28
34
Carefully turn the treadmill onto its other side.
Assemble the other Base Leg (55) as described
above.
d. If the treadmill still will not run, please call our Customer Service Department.
b. First remove the key from the console and
UNPLUG THE POWER CORD. Remove the
screws from the hood. Carefully remove the hood.
Locate the Reed Switch (8) and the Magnet (14) on
the left side of the Pulley (17). Turn the Pulley until
the Magnet is aligned with the Reed Switch. Make
sure that the gap between the Magnet and the
Reed Switch is about 1/8” (3 mm). If necessary,
loosen the Electronic Screw (9) and move the Reed
Switch slightly. Retighten the Screw. Re-attach the
hood, and run the treadmill for a few minutes to
check for a correct speed reading.
• One (1) phillips screwdriver
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back
straight.
5
2
55
3. Carefully rotate the Console Base (45) to the position shown. Secure the Console Base with the two
Console Base Bolts (29), Console Base Washers
(39), and Console Base Nuts (11) as shown.
3
HOW TO LOWER THE TREADMILL FOR USE
45
1. Hold the upper end of the treadmill with your right hand
as shown. Using your left hand, slide open the storage
latch. Pivot the treadmill until the frame guide and the
foot rail are past the storage latch.
11
29
39
39
11
29
Storage
Latch
Frame
Guide
Refer to the inset drawing. Tighten all four
Console Base Bolts (29) and Console Base Nuts
(11) as tightly as possible. Carefully lift up and
push down on the handrails to make sure that
the Console Base (45) does not move. Regularly
inspect and tighten all four Console Base Bolts
and Console Base Nuts.
45
Handrails
11
4. Attach the Frame Guide (66) and the Frame Guide
Spacer (46) to the left side of the Frame (21) with
four Latch Screws (25). Note: Be careful not to
overtighten the Latch Screws. Make sure that the
thick end of the Frame Guide is at the bottom.
11
29
29
4
25
66 46
21
Thick end
5. Remove the backing from the Adhesive Clip (2).
Press the Adhesive Clip onto the base of the Upright
(37) in the indicated location. Press the Allen
Wrench (35) into the Adhesive Clip.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
5
37
2
35
6. The Console (49) requires two "AA" batteries (not
included); alkaline batteries are recommended.
6
49
Open the Battery Cover (48) as shown. Press two
batteries into the battery compartment, with the
negative ends of the batteries (marked “–”)
touching the springs. Close the Battery Cover.
48
Batteries
7. Make sure that all parts are properly tightened
before you use the treadmill. To protect the floor
or carpet from damage, place a mat under the
treadmill.
6
11
Opened
HOW TO FOLD AND MOVE THE TREADMILL
OPERATION AND ADJUSTMENT
HOW TO FOLD THE TREADMILL FOR STORAGE
THE PERFORMANT LUBETM WALKING BELT
Before folding the treadmill, unplug the power cord.
Caution: You must be able to safely lift 45 pounds
(20 kg) in order to raise, lower, or move the treadmill.
Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They
will deteriorate the walking belt and cause excessive wear.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and a earthing
plug. Plug one end of the cord into the treadmill. Plug the power
cord into an appropriate outlet that is properly installed and
earthed in accordance with all local codes and ordinances.
2. Move your right hand to the position shown at the right,
and hold the treadmill firmly. Raise the treadmill until the
storage latch locks over the frame guide. Make sure that
the storage latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 30° C.
DANGER:
Storage
Latch
Closed
Improper connection of the
equipment-earthing conductor can result in an
increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
D
SE
FU
Frame Guide
Use only a power cord type H05VV-F with a conductor of at least 1mm2, with a country recognised plug and an
appliance coupler.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above. Make sure that the
storage latch is closed fully over the frame guide.
1. Hold the upper ends of the handrails. Place one foot on
one of the front wheels as shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back,
or the base pads may come off. To reduce the risk of
injury, use extreme caution whilst moving the treadmill. Do not attempt to move the treadmill over an
uneven surface.
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.
10
Base Leg
Front Wheels
7
DIAGRAM OF THE CONSOLE
To stop the walking belt, step onto the foot rails
and turn the speed control to the RESET position.
Monitor Display
3
On/Reset Button
Speed Control
Clip
Key
Follow the steps below to operate the console.
CAUTION:
Before operating the
console, read the following precautions.
1
Insert the key fully into the power switch.
Inserting the key will
not turn on the display. The display will
turn on when the
on/reset button is
pressed or when the
walking belt is started.
Note: If you just
installed batteries, the display will already be on.
• Do not stand on the walking belt when turning on the power.
• Always wear the clip (see the drawing
above) whilst operating the treadmill. When
the key is removed from the console, the
walking belt will stop.
• Adjust the speed in small increments.
• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and use only a sealable
water bottle.
2
Reset the speed control and start the walking
belt.
Turn the speed control
counterclockwise until
it stops at the RESET
position. Note: Each
time the walking belt
is stopped, the
speed control must
be turned to the
RESET position
before the walking belt can be restarted.
STEP BY STEP CONSOLE OPERATION
Before operating the console, make sure that the
power cord is properly plugged in. (See HOW TO
PLUG IN THE POWER CORD on page 7.) In addition,
make sure that batteries are installed in the console.
(See step 6 on page 6.) If there is a thin sheet of clear
plastic on the console, remove it.
4
To turn off the power, simply wait for about six
minutes. If the walking belt is not moved and the
on/reset button is not pressed for six minutes, the
power will turn off automatically.
Follow your progress with the monitor modes
Note: The console can display distance and
speed in either kilometres or miles. (See HOW TO
SELECT KILOMETRES AND MILES at the right.)
When the power is turned on, the
console will automatically scan through
five different modes.
A flashing mode indicator will show
which mode is
currently displayed.
The five modes are
Mode Indicator
described below.
HOW TO SELECT KILOMETRES AND MILES
The console can display distance and speed in either
kilometres or miles. To change the unit of measurement, first UNPLUG THE POWER CORD. Next,
remove the six screws attaching the console to the
console base.
Lift the conConsole
sole a few
Screws
inches, being
careful not to
pull on the
wires, and
turn the console over.
Locate the
small switch
on the back
Screws
of the conConsole Base
sole. Move
the switch
upward or
downward to
select kilometres or miles.
Re-attach the
console to the
console base.
Switch
After changing the unit
of measurement, remove
one of the
batteries from the console for about five seconds
and then reinsert it. This will reset the console.
Speed—This mode shows the speed of the
walking belt.
Time—This mode shows the elapsed time. Note:
If you stop exercising for ten seconds or longer,
the time mode will pause.
Distance—This mode shows the total distance
you have walked or run since the key was
inserted.
Fat Calories—This mode shows the approximate number of fat calories you have burned.
(See FAT BURNING on page 14.)
Calories—This mode shows the approximate
number of calories you have burned.
If desired, the display
can be reset by
pressing the on/reset
button.
Next, slowly turn the speed control clockwise until
the walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin
exercising. Change the speed of the walking belt
as desired by turning the speed control.
Step onto the foot rails of the treadmill. Next, find the
clip attached to the key (see the drawing above). Slide
the clip onto your waistband.
8
Turn off the power
9
PART LIST—Model No. WETL71590
Qty.
1
2
3
4
5
6*
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49*
50
51
52
53
1
1
1
1
1
1
1
1
12
1
4
4
2
1
6
1
1
1
1
1
1
1
1
1
14
1
1
4
2
2
4
2
2
2
1
2
1
1
4
19
2
1
1
1
1
1
1
1
1
1
1
7
1
Description
Hood
Adhesive Clip
Motor Belt
Motor Pivot Nut
Pulley/Flywheel
Motor/Pulley/Flywheel
Motor
Reed Switch
Electronic Screw
Reed Switch Clip
Console Base Nut
Hood Anchor
Front Roller Bolt
Magnet
Platform Screw
Motor Tension Nut
Front Roller/Pulley
Motor Tension Bolt
Circuit Breaker
Reed Switch Bracket
Frame
Receptical
Controller
Motor Pivot Bolt
Latch Screw
Choke
Electronics Bracket
Base Leg Bolt
Console Base Bolt
Wheel Nut
Base Leg Pad
Base Leg Endcap
Wheel Bolt
Wheel
Allen Wrench
Frame Pivot Bolt
Upright
Storage Latch
Console Base Washer
Screw
Handrail Cover
Key/Clip
Latch Decal
Filter
Console Base
Frame Guide Spacer
Console Cover
Battery Cover
Console Assembly
Speed Potentiometer
Speed Control Knob
1/2” Screw
Wire Harness
Key No.
Qty.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
#
#
#
#
#
#
#
#
#
#
#
1
2
7
1
2
1
1
6
2
2
1
2
2
2
6
1
1
4
1
1
1
1
1
2
2
4
1
2
1
1
1
2
1
1
4
1
8
1
2
1
1
2
1
1
1
1
1
1
2
1
1
1
1
Description
Grommet
Base Leg
Belly Pan Fastener
Belly Pan
Upright Spacer
Motor Tension Washer
Left Foot Rail
Frame Pivot Nut/Base Leg Nut
Belt Guide
Wire Clip
Right Foot Rail
Roller Guard
Frame Guide
Foot
Pivot Washer/Base Leg Washer
Right Endcap
Rear Roller Adj. Bolt
Roller Adjustment Washer
Rear Roller
Ground Wire
Walking Platform
Walking Belt
Releaseable Tie
Cable Tie Screw
Cable Tie Clamp
8” Cable Tie
Motor Star Washer
Front Roller Nut
Fan
Left Endcap
Motor Pivot Sleeve
Motor Pivot Bushing
Grounding Screw
Grounding Star Washer
Nylon Washer
Grounding Nut
Console Screw
Rear Roller Bolt
1/4” Washer
1/4” Plain Nut
Spring
Roller Guard Screw
10” Black Wire, 2 Female
8” Black Wire, 2 Female
4” Black Wire, 2 Female
4” Black Wire, 2 Male
8” Red Wire, Male/Female
4” Blue Wire, Male/Female
10” White Wire Harness
8” White Wire, 2 Female
8” Green/Yellow Wire
4” Green/Yellow Wire
User’s Manual
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
REMOVE THIS EXPLODED DRAWING
AND PART LIST FROM THE MANUAL
Save this EXPLODED DRAWING and PART LIST for future reference.
34
Key No.
R0499A
Note: Specifications are subject to change without notice. For information about
ordering replacement parts, see the back cover of the User’s Manual.
EXPLODED DRAWING—Model No. WETL71590
R0499A
50
11
42
39
51
45
90
9
29
90
9
25
49*
6*
1
4
23
25
90 29
41
26
25
5
3
90
90
90
48
47
38
9
40
24
8
12
39
7
11
44
52
20
90
25
78
81
40
12
19
27
16
22
17 84
88 59
25
75
66
35
15
30
36
68
12
80
43
41
34
68
40
15
9
33
63
13
2
28
12
88
71
60
37
54
40
14
15
79
10
9
82
85
76
74
55
18
31
40
81
85
40
68
31
40
32
15
36
61
46
92
71
13
15
94
65
61
61
61
54
30
93
62
33
40
40
15
61
40
55
67
72
25
40
70
21
66
40
40
64
67
73
91
69
68
32
71
52
34
40
52
83
86
87
89
53
61
58
95
71
58
57
40
40
31
40
28
68
28
31
40
11
42
9
9
6*
4
23
41
26
25
5
3
9
40
24
8
12
7
44
52
20
81
10
40
12
54
40
19
27
16
28
33
63
22
71
30
12
80
17 84
88 59
75
74
55
18
31
40
81
85
31
40
32
15
58
71
13
15
61
40
3
62
40
52
25
21
67
0
66
34
68
40
13
9
12
88
14
15
9
82
85
40
64
57
Download PDF