BTC | 9001URF | User`s guide | BTC 9001URF User`s guide

封面內頁
封面內頁
9001URF
USB Wireless Keyboard & Mouse Kit
User’s Guide
Version 1.3
The information in this document is subject to change without notice and does not represent a
commitment on the part of the vendor.
No warranty of representation, either expressed or implied, is made with respect to the quality,
accuracy or fitness for any particular purpose of this document. The manufacturer reserves the
right to make changes to the content of this document and/or the products associated with it at any
time without obligation to notify any person or organisation of such changes.
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages arising out of the use or inability to use this product or documentation, even if advised of
the possibility of such damages.
Copyright © 2003. All rights reserved
IBM, PC/AT and PS/2 are registered trademarks of International Business Machines Corporation.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the
United States of America and/or other countries.
All other trademarks are trademarks of their respective holders.
Table of Contents
1
Introduction ...................................................................................................1
What's in this package ................................................................................1
2
System Requirements .................................................................................2
3
Hardware Installation...................................................................................3
4
Software Installation ....................................................................................7
4.1 Keyboard Driver Installation...............................................................7
5
Using the Keyboard and Mouse ................................................................8
5.1 Using the Keyboard .............................................................................8
5.2 Using the Mouse.................................................................................10
6
Troubleshooting .........................................................................................11
1
Introduction
Congratulations on your purchase of this USB wireless RF keyboard and mouse!
This keyboard and mouse will finally free you of the constraints of your desktop
by providing a wireless connection between your keyboard/mouse and your PC.
Pass around the keyboard or mouse during meetings without having to bother
about a cable blocking your way or write e-mails and surf the Internet from the
comfort of your living room couch!
This keyboard and mouse kit consists of a keyboard, a mouse and a receiver.
The keyboard and mouse can operate freely within a radius of at least 3.28 feet
(1meter) from the receiver, which itself has a maximum range from your PC of
around 3.28 feet (1meter). The wireless keyboard contains multimedia keys and
three ACPI keys to make you save more hand-movement and access to Internet
much quickly. Besides, the wireless mouse uses an optical sensor instead of
mouse ball. The precise sensor detects motion on hundreds of surfaces,
including wood, plastic, or even your pants leg, and prevents you from the
interference caused by dust. Because the keyboard and mouse use radio
frequencies to transmit the wireless signal it has no constrictions on viewing
angles such as with infrared devices like your TV’s remote control, etc.
Besides providing unprecedented freedom of movement when operating the
keyboard or mouse, the kit also offers more extra functionality by introducing
dedicated buttons for often used Internet browser functions as well as Sleep
functions. (Please note: The Internet keys work only under Microsoft Internet
Explorer 5.0 or later version!). And last but not least, this package also provides
a special driver, which provides unique shortcut functions.
In order to enjoy your keyboard and mouse to their full potential we
recommended you read this manual carefully prior to installation.
What's in this package
!
A wireless keyboard with palmrest
!
A wireless mouse
!
A receiver
!
A driver disk
!
A user's guide
!
Batteries (4 pcs of AA alkaline batteries)
1
2
System Requirements
!
Microsoft Windows 98, Windows ME, Windows 2000 or Windows
XP operating system
!
Microsoft Internet Explorer 5.0 or later version (for the Internet keys)
!
Standard sound card (for CD and Video operation)
!
The system supporting ACPI or APM II (for power management buttons)
!
ATX mother board and ATX power supply (for power management
buttons)
!
USB port
Please refer to table below for the other system requirements for the features.
Operating System
Windows ME /
Function Description
Windows 98
Windows 2000 /
Windows XP
Wireless
Functionality
Available immediately
Available immediately
after hardware installation after hardware installation
Keyboard Extra
Multimedia Buttons
Requires keyboard driver
installation (see driver
disk for details)
Requires keyboard driver
installation (see driver
disk for details)
Keyboard Extra
ACPI Keys
Requires enabling of
system ACPI (Power
Management) function
Available immediately
after hardware installation
Keyboard Battery
Low Function
Requires installation of
keyboard driver (see
driver disk for details)
Requires installation of
keyboard driver (see
driver disk for details)
Keyboard LED Light
Function
Requires installation of
keyboard driver (see
driver disk for details)
Requires installation of
keyboard driver (see
driver disk for details)
Mouse Battery Low
Function
Requires installation of
keyboard driver (see
driver disk for details)
Requires installation of
keyboard driver (see
driver disk for details)
2
3
Hardware Installation
Slide Switch Setting
Step 1: Take the receiver and select channel CH1 or CH2 by using the slide
switch on the side of the receiver. (Remember your selection.)
CH2
CH1
Back View of Receiver
Channel Switch of Receiver
Step 2: Connect the receiver to your PC by plugging in the receiver’s USB plug
into your PC.
Back View of Receiver Plug
Front View of Receiver Plug
Step 3: Take the keyboard and make sure the batteries on the back are
installed correctly. (Follow the polarity signs in the battery compartment.)
(-)
Battery 1.5V 2pcs
(+)
ID Button
Channel Switch
Bottom View of Keyboard
3
Step 4: Use the slide switch in the battery compartment of the keyboard to
select the same channel as the one selected in step 2 on the receiver.
Channel Switch & ID Setting of
keyboard
ID Button
CH2
CH1
Step 5: Take the mouse and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
utton
Bottom View of Mouse
Step 6: Use the slide switch in the battery compartment of the mouse to select
the same channel as the one selected in step 2 and 5. (Open the battery
cover to find the switch channel setting)
Channel Switch of Mouse
Remarks:
1. Both of the keyboard and mouse use 2pcs.standard UM-3 (AA) 1.5V alkaline
batteries.
2. Battery life is approximately 3-4 months, depending on the intensity of usage.
3. Make sure the receiver is placed in a location where is relatively free of
strong electromagnetic or transmission sources in order to ensure optimal
reception of the keyboard and mouse signal.
4
ID Button Setting
This wireless keyboard kits contains 2 channels, and each channel contains 255
sets ID. This extra ID-recognition function helps to protect against interference
from other RF keyboards in the same environment.
#
The word CONNECT labels the ID button on each unit.
#
The LED under ID button of receiver shows connecting condition.
Step 1: Press the ID button on the top of the receiver once.
ID Button
ID Button of Receiver
Step 2: Press the ID button on the bottom of the mouse once.
utton
ID Button of Mouse
Step 3: Press the ID button on the bottom of the keyboard once.
ID Button of Keyboard
ID Button
CH2
CH1
Remarks:
1. You must follow the procedure above to set the ID of receiver, mouse and
keyboard. Once the receiver ID button is pressed you have 30 seconds to
complete the entire process, or you will need to begin again.
5
2.
3.
When the receiver’s connector is plugged in, the yellow receiver light will
flash. Once the IDs of mouse, keyboard and receiver are set, it will remain
steadily lit. Please note that do not press on any key when you set ID of
keyboard, or the setting will fail.
When changing the batteries of keyboard or mouse, there is no need to
reset all the ID’s. Simply reset one of them.
4.
When keyboard batteries are low, a battery low icon
system tray.
5.
will show on the
When mouse batteries are low, a battery low icon
system tray.
The optical mouse is designed to conserve battery life and will enter a
power saving “Sleep” mode if it is inactive for 21 minutes. Click a button on
the mouse to wake it up. Move the mouse does not wake it.
6.
will show on the
Detachable Palmrest
At your discretion, you may choose to connect the palmrest with keyboard.
To connect the palmrest with the keyboard please follow figure 1 & figure 2.
Figure 1
Figure 2
6
4
Software Installation
After finishing the hardware installation as described in this manual and starting
up your PC, you should be able to immediately take advantage of the wireless
function of the wireless keyboard and mouse. If the keyboard and mouse are
not working properly, see Chapter 6 Troubleshooting for tips on how to solve
your problem.
4.1 Keyboard Driver Installation
If your operating system is Windows ME, Windows 2000 or
Windows XP, you can immediately take advantage of the extra
function buttons on the keyboard (except “Battery Low” and “LED Light”
functions). But, if your operating system is Windows 98, you will have to
install the keyboard driver software to take advantage of these functions.
The keyboard driver program is located on the driver disk included in the
box.
1.
Remove any existing keyboard software from the computer.
2.
Insert the driver disk in your computers and run "SetupKey.exe".
3.
Follow the on screen instructions to finish the installation procedure.
The driver by default will be installed at C:\Program
Files\KMaestro.
7
5
Using the Keyboard and Mouse
5.1 Using the Keyboard
Besides the usual keys, this keyboard also has extra-dedicated keys,
which provide the following ACPI, multimedia and Internet functionality:
$
ACPI Keys:
Your keyboard has the power management keys that are Power off,
Sleep, and Wake up three keys. They are also can be called ACPI
(Advanced Configuration and Power Interface) keys.
As these ACPI keys are performed not completely under Windows 98;
the KeyMaestro driver provides an option to enable the ACPI keys. When
the option is enabled, the driver will take Windows' place to process
these keys.
Note: For detailed information, please read the online help by right
clicking the mouse on the KeyMaestro Keyboard icon
in the Windows
task bar and selecting Help.
Close the operating system and powers
down the system.
Power Off
8
P.S: Although this key is a standard key
under Windows 98, Windows 98 processes
it as a Sleep key.
Sleep
Put your system to sleep (power-saving)
mode. Any key will wake up your system
and return to the previous working status.
Wake Up
Wake up your system and returns to the
previous working status.
$
Multimedia Keys
There is a row of multimedia keys on the top of keyboard. The functions
are described as below:
Help
Display the help file on the screen.
Shortcut
Provide you to create an easy access to the
documents and programs you use most
often. The default setting for Shortcut button
is to launch Windows accessory program
“Notepad”.
WWW
Search
Launch to your Internet Browser application
and go to the Search Engine web site.
Favorites
Folder
Open My Favorite folder for you to select
your favorite web site.
WWW Home
Launch to your Internet Browser application
which should be pre-installed. If you have
installed two browsers in your system, the
system default one will be opened. Mostly
the system default is the later installed one.
Volume
Control
Control the volume to up or down of your
audio output to the speakers.
Mute
Mute the sound output. Repress this button
to resume.
Play/Pause
When the CD or Video is playing, press this
button to pause it, and press the button
again to resume it from the current position.
9
Stop
Stop the playing.
Skip backward to the previous file/track or
play backward fast when pressing once
quickly.
Previous/
Fast
Backward
Play backward fast when pressing on the
button.
Note: The Fast Backward function only
supports Microsoft CD Player Version 4.0
(under Windows NT4.0), Microsoft CD
Player Windows 95, Microsoft CD Player
Windows 98 and Microsoft CD Player
Version 5.0 (under Windows 2000).
Skip forward to the next file/track or play
forward fast when pressing once quickly.
Next/
Fast
Forward
Eject
Play forward fast when pressing on the
button.
Note: The Fast Forward function only
supports Microsoft CD Player Version 4.0
(under Windows NT4.0), Microsoft CD
Player Windows 95, Microsoft CD Player
Windows 98 and Microsoft CD Player
Version 5.0 (under Windows 2000).
Eject/ load the CD tray.
5.2 Using the Mouse
After plugging the receiver in your computer and setting the mouse ID as
described in chapter 3- Hardware Installation, you can take advantage of
this optical mouse immediately when you start up the computer.
10
6
Troubleshooting
If you are experiencing problems with your keyboard or mouse please check the
following:
1.
Take out the receiver’s connector and check the receiver’s plug for
possible broken pins. If the plugs appear normal then reinsert the plugs
on your PC.
2.
Check to see if the batteries in the keyboard and mouse are installed
correctly. Make sure the polarity of the batteries corresponds with the
polarity signs in the battery compartment.
3.
Replace the batteries to make sure the batteries are not low in power.
After replacing the batteries of keyboard or mouse, please also
remember to set the ID. There is no need to reset all the ID’s. Simply
reset one of them.
4.
Please remember to set the ID when your keyboard kits do not work
properly.
5.
It is strongly recommended to place the receiver in front of the monitor in
order to prevent signal disturbance from the monitor.
6.
If your PC system’s BIOS setup has options for the keyboard or mouse,
make sure they are set to default settings. If you are not familiar with the
BIOS, refer to your PC’s manual for more information.
7.
If you have problems using the sleep button, make sure that the power
management in your PC has been enabled both in the BIOS and in
Windows. For more information on your PC’s BIOS settings, please refer
to your PC’s manual. For more information on how to enable the power
management features in Windows, refer to your Windows manual.
8.
Use the mouse only on a clean, flat, non-slippery surface in order to
ensure smooth and accurate cursor action. If you use a mouse-pad,
choose a light-colored one, not a dark one, to use less battery power.
9.
Keep all items away from direct sunlight, moisture, dirt, extreme heat and
abrasive chemical (cleaning) solutions.
10.
Should the receiver, the keyboard or mouse become accidentally
immersed or splashed by liquids, switch off your PC immediately, unplug
all items and refer to your dealer for further assistance. In these cases
please refrain from using any of the items before consulting with your
dealer!
If above troubleshooting suggestions still do not solve your problem then please
refer to your direct dealer for technical support.
11
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
!
!
!
!
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du Règlement sur le
materiel brouilleur du Canada.
This equipment is intended for use in the following countries EU 15 countries:
Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg,
Netherlands, Spain, Sweden, United Kingdom, Portugal, Greece. And other non-EU
countries: Switzerland, Norway, and Iceland.
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. Shielded
interface cable, if any, must be used in order to comply with emission limits.
封底內頁
封底
3100505100 v1.3
May 2003
Printed in China
Download PDF