Samsung | SGH-T739 | User manual | Samsung SGH-T739 User manual

Samsung Katalyst™
P O R T A B L E
M O B I L E
Q u a d - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-16045A
Printed in Korea
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
Katalyst™ is a Trademark of T-Mobile USA, Inc. ©2007 T-Mobile USA, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
T739_UVGI4_CH_101507_F9
Table of Contents
Section 1: Getting Started ..........................................................................5
Activating Your Phone ...............................................................................................5
Switching the Phone On or Off ................................................................................13
Setting Up Your Voice Mail ......................................................................................13
Section 2: Understanding Your Phone .....................................................15
Features of Your Phone ...........................................................................................15
Open View of Your Phone ........................................................................................16
Keys .......................................................................................................................16
Closed View of Your Phone .....................................................................................18
Rear View of Your Phone .........................................................................................19
Display Layout ........................................................................................................19
Help ........................................................................................................................22
Section 3: Wi-Fi .........................................................................................23
Introducing Your T-Mobile HotSpot @Home Capable Phone ....................................23
Connecting to Wi-Fi for the First Time .....................................................................25
Using Wi-Fi .............................................................................................................26
Connecting to Wi-Fi Networks .................................................................................27
Get Security Key .....................................................................................................33
Use Get Security Key .............................................................................................. 34
Add New Network ...................................................................................................35
Add From Available Network Option ........................................................................ 36
Add Manually ..........................................................................................................36
Troubleshooting ......................................................................................................38
T-Mobile Wi-Fi Help ................................................................................................38
Section 4: Call Functions ..........................................................................39
Making a Call ..........................................................................................................39
Adjusting the Call Volume .......................................................................................41
Answering a Call .....................................................................................................41
Call Records ...........................................................................................................41
Silent Mode ............................................................................................................44
Selecting Functions and Options .............................................................................44
Section 5: Menu Navigation .....................................................................51
Menu Navigation .....................................................................................................51
Menu Outline ..........................................................................................................52
Section 6: Entering Text ...........................................................................60
Changing the Text Input Mode ................................................................................60
Using T9 Mode .......................................................................................................61
Using ABC Mode .....................................................................................................63
Using Number Mode ...............................................................................................64
Using Symbol Mode ................................................................................................64
1
Section 7: Understanding Your Phonebook ............................................ 65
Using Contacts List .................................................................................................65
Adding a New Contact .............................................................................................66
Storing a Number in the Phone’s Memory ...............................................................66
Storing a Number in the SIM Card ...........................................................................67
Dialing a Number from the SIM Card .......................................................................68
Finding a Phonebook Entry ......................................................................................69
Dialing a Number from Phonebook ..........................................................................70
Speed Dialing .........................................................................................................70
Editing a Caller Group .............................................................................................71
Block List ................................................................................................................72
Deleting all of the Phonebook Entries ......................................................................73
Management ..........................................................................................................73
Own Number ..........................................................................................................75
FDN List ..................................................................................................................76
Section 8: Messages ................................................................................ 77
Types of Messages .................................................................................................77
Text Messages ........................................................................................................78
Picture Messages ...................................................................................................79
Voice Notes .............................................................................................................82
Inbox ......................................................................................................................83
Outbox ....................................................................................................................87
Drafts .....................................................................................................................88
Templates ...............................................................................................................88
Voice Mail ...............................................................................................................89
Delete all ................................................................................................................89
Settings ..................................................................................................................90
Memory Status .......................................................................................................91
Broadcast Messages (SIM Card Dependent) ............................................................91
Instant Messaging (IM) ............................................................................................91
Section 9: Changing Your Settings ......................................................... 93
Wi-Fi Settings .........................................................................................................93
Time & Date ............................................................................................................93
Phone Settings ........................................................................................................95
Display Settings ......................................................................................................97
Bluetooth ..............................................................................................................100
Sound Settings .....................................................................................................100
Synchronization ....................................................................................................103
Synchronizing your Phonebook .............................................................................105
Network Services ..................................................................................................106
Security ................................................................................................................109
Software Update ...................................................................................................111
Memory Status .....................................................................................................111
Reset Settings .......................................................................................................111
Table of Contents
2
Section 10: Fun & Apps ..........................................................................112
Files .....................................................................................................................112
Games ..................................................................................................................119
Music Player .........................................................................................................121
Camera .................................................................................................................121
Voice Commands ..................................................................................................121
Organizer ..............................................................................................................129
Synchronization ....................................................................................................136
Section 11: Music Player ........................................................................139
Music Player .........................................................................................................139
Music Player Options ............................................................................................ 139
Player Settings .....................................................................................................140
Adding Music to a Playlist .....................................................................................142
Playing Music Files ...............................................................................................143
Transferring Music Files .......................................................................................144
Deleting Music Files From the Memory Card .........................................................144
Assigning Music Files ...........................................................................................145
Section 12: Camera .................................................................................147
Using the Camera .................................................................................................147
Take and Send .....................................................................................................147
Record video ........................................................................................................152
Photos folder ........................................................................................................156
Videos ..................................................................................................................157
My Album .............................................................................................................158
My Journal ...........................................................................................................158
Section 13: t-zones .................................................................................160
t-zones .................................................................................................................160
Section 14: Health and Safety Information ............................................163
Health and Safety Information ...............................................................................163
Samsung Mobile Products and Recycling ..............................................................165
UL Certified Travel Adapter ...................................................................................165
Consumer Information on Wireless Phones ...........................................................165
Road Safety ..........................................................................................................172
Responsible Listening ...........................................................................................173
Operating Environment .........................................................................................175
Using Your Phone Near Other Electronic Devices ...................................................175
Potentially Explosive Environments .......................................................................177
Emergency Calls ...................................................................................................177
FCC Notice and Cautions .......................................................................................178
Other Important Safety Information .......................................................................178
Product Performance ............................................................................................ 179
Availability of Various Features/Ring Tones ...........................................................180
Battery Standby and Talk Time .............................................................................180
3
Battery Precautions ...............................................................................................180
Care and Maintenance ..........................................................................................182
Section 15: Warranty Information ......................................................... 183
Standard Limited Warranty ...................................................................................183
Index ........................................................................................................ 188
Table of Contents
4
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Switching the Phone On or Off
• Setting Up Your Voice Mail
This section explains how to start using your phone by first configuring your
hardware, activating your service, and then setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, you are provided with a plug-in SIM card
loaded with your subscription details, such as your PIN, available optional services,
and many others features.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or
bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out
of reach of small children.
If necessary, switch off the phone by holding down the
image displays.
key until the power-off
1. Remove the battery cover by sliding the battery cover down (in the
direction of the arrow).
5
Activating Your Phone
2. Carefully lift the battery cover away from the bottom of the phone.
3. Carefully slide the SIM card under the metal bracket and into the SIM card
UN
LO
CK
LO
CK
UN
LO
CK
LO
CK
socket until the card locks into place. Make sure that the card’s gold
contacts face into the phone and that the upper-left angled corner of the
card is positioned as shown below.
UN
LO
CK
LO
CK
UN
LO
CK
LO
CK
Note: If the card is not inserted correctly, the phone does not detect the SIM card. Remove the battery and
re-orient the card back into the slot.
Getting Started
6
Inserting the Memory Card
Your phone supports an optional memory card (microSD™) for data storage of such
things as music, pictures, video or other files. This type of memory card is designed
for use with this mobile phone and other devices.
Note: The Samsung Katalyst™ supports up to a 2 Gigabyte memory card.
1. To unlock the memory cover, use your thumb to slide the memory card
UN
LO
CK
LO
CK
UN
LO
CK
LO
CK
cover to the Unlock position (as indicated) until you hear a slight clicking
sound.
7
Activating Your Phone
UN
LO
CK
LO
CK
2. Gently lift upward on the edge of the memory card cover.
3. Place the microSD card into the slot (as shown below). Ensure the
UN
LO
CK
LO
CK
microSD’s gold contact pins face downward and the card is placed so that
the indentations on the card face the same direction as those illustrated.
Getting Started
8
4. Close and lock the memory card cover:
UUNNLO
LO CK
CK
LOLOCK
CK
UUNNLO
LO CK
CK
L
LOOCK
CK
• (1) close the memory card cover using your thumb to push the cover down
(as shown below).
• (2) slide the memory card cover back into the Lock position.
Removing the memory card
1. Repeat steps 1 and 2 (page 7).
2. Carefully remove the memory card.
3. Close and lock the memory card cover:
• (1) close the memory card cover using your thumb to push the cover down (as
shown below).
• (2) slide the memory card cover back into the Lock position.
Installing the Battery
1. With the cover removed, verify the SIM card is securely inserted.
2. Install the battery by aligning its 3 brass tabs to those located at the bottom
of the battery compartment (1). The arrow on the battery should be
pointing towards the prongs.
9
Activating Your Phone
3. Press the battery down until it clicks into place (2).
4. Make sure that the battery is properly installed before switching on the
phone.
5. Reinstall the battery cover by sliding it back onto the phone until you hear it
securely click. Make sure the battery is properly installed before switching
on the phone.
Getting Started
10
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter, which is
used for charging the battery, is included with your phone. Use only approved
batteries and chargers. Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but doing so requires additional
charging time.
Note: You must fully charge the battery before using your phone for the first time. A discharged battery
recharges fully in approximately 4 hours.
1. With the battery installed, temporarily remove the plastic cover on the left
side of the phone and plug in the travel adapter’s connector into the jack.
Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery
is not installed and the travel adapter is connected the handset continuously power cycles and
prevents proper operation.
11
Activating Your Phone
Note: The following illustration is the incorrect method for connecting the charger. If attempted, damage to
the accessory port occurs therefore voiding the phone’s warranty.
+
Incorrect
Correct
2. Plug the adapter into a standard AC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adapter could damage your phone and void your
warranty.
3. When charging is finished, unplug the Travel Adapter from the power outlet
and then disconnect it from the phone.
4. Resecure the plastic cover over the interface jack on the phone.
Getting Started
12
Warning!: You must unplug the Travel Adapter before you remove the battery from the phone during
charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds and the “Warning low battery” message repeats at regular intervals on the
display. When this happens, your phone turns off the backlight to conserve the
remaining battery power.
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. Press and hold the
key until the phone switches on.
2. If the phone asks for a PIN, enter the PIN and press the OK soft key or the
key. For more information, refer to "Change password" on page 109.
3. If the phone prompts “View Tutorial and connect to Wi-Fi?” press the
Yes softkey, or otherwise press the No soft key to continue.
Note: For more information, refer to "Connecting to Wi-Fi Networks" on page 27.
The phone searches for your network and after finding it, the T-Mobile icon
“T” displays on the lower right half of your screen. Now you can make or
receive calls.
Note: The display language is preset to English at the factory. To change the language, use the Language
menu. For more information, refer to "Language" on page 95.
4. When you wish to switch off the phone, press and hold the
key until
the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up voice mail:
1. In Idle mode, press and hold the
key on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and your name.
Note: These steps may be different depending on your network.
13
Setting Up Your Voice Mail
Accessing Your Voice Mail
You can press and hold the
key on the keypad or use the phone’s menu to
access your voice mail. To access voice mail using the menu:
1. In Idle mode, press the Menu soft key.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Call voice mail and press the Select soft key or the
key.
Your phone dials the specified voice mail number.
5. When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Number
Your SIM card gives you the default service number of the voice mail center.
However, should you need to change the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Voice server number and press the Select soft key or the
key.
5. Highlight Voice Mail and press the Options soft key.
6. Highlight Edit and press the Select soft key or the
key.
7. Edit the name if desired, and then press the Down Navigation key to edit
the number. Editing can be done by using the
key to delete numbers
and then using the keypad to enter a new number.
8. Press the Options soft key, highlight the Save option, and press the Select
soft key or the
9. Press the
key.
key to return to Idle mode.
Getting Started
14
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Keys
• Closed View of Your Phone
• Display Layout
• Help
This section outlines some key features of your phone. It also displays the screen and
the icons that display when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
• 1.3 Megapixel Camera with 4x Digital Zoom
• Bluetooth® Wireless Technology
• T-Mobile HotSpots @ HOME (Wi-Fi connectivity)
• User friendly, menu driven access to features and options
• Instant Messaging capability
• Sound/Image media capability
• Fun & Apps feature provides files, games, camera, alarm, calendar, calculator, tip
calculator, notes, world time, unit conversion, timer, stopwatch, music player,
voice recognition, image editor, synchronization and tasks.
15
Open View of Your Phone
Open View of Your Phone
The following illustrations show the main elements of your phone:
1. Earpiece
14. Display
13. Navigation
(Up/Down/Left/Right) keys
2. Volume keys
3. Left Soft key
4. Send key
5. Cancel/Clear key
12. Right Soft key
11. OK (Select) key
10. Power On/Off
(Exit) key
6. Voice mail key
7. Alphanumeric
keys
8. Special function keys
9. Microphone
Keys
The following list correlates to the illustrations.
1. Earpiece allows you to hear the other caller and the different ring tones or
sounds offered by your phone.
2. Volume keys allow you to adjust the ring volume in standby mode (with
the phone open) or adjust the Speaker volume during a call. When
receiving an incoming call, if you press the volume key, you can mute the
ring tone. If you press and hold the volume key, you can reject the call.
3. Left Soft key allows you to select soft key actions or menu items
corresponding to the bottom left line on the display screen.
4. Send key allows you to make or answer a call. In Idle mode, recalls the
last number dialed or received when held down.
5. Cancel/Clear key deletes characters from the display. In Menu mode, this
key returns you to the previous menu level.
Understanding Your Phone
16
6. Voice mail key allows you to quickly access your voice mail. Press and
hold this key for two seconds to automatically dial your voice mail’s phone
number.
7. Alphanumeric keys allow you to enter numbers, letters, and some special
characters.
8. Special function keys allow you activate unique features while in Idle
mode. In Idle mode, if you press and hold the
key, you can turn on
the Silent Mode. In Idle mode, if you press and hold the
key, you can
turn on the Voice Command application.
9. Microphone is used during phone calls and allows other callers to hear
you clearly when you are speaking to them. It is also used in making voice
note recordings.
10. Power On/Off (Exit) key ends a call. Press and hold this key for two
seconds to turn your phone on or off. While in the Menu mode, it returns
the phone to Idle mode and then cancels your input.
11. OK (Select) key allows you to accept the choices offered when navigating
through a menu.
12. Right Soft key allows you to select soft key actions or menu items
corresponding to the bottom right line on the display screen. It also
provides quick access to your t-zones.
13. Navigation key scrolls through the phone’s menu options and acts as a
shortcut key from standby mode.
In Menu mode, scrolls through the phone’s menus and Phonebook.
In Idle mode:
• Down key: allows you to directly access your Contact list.
• Up key: allows you to directly access the Call records feature.
• Left key: allows you to directly access Text messaging (New Message).
• Right key: allows you to directly access Voice note.
Note: SIM-dependent features may alter the functionality of the Navigation keys.
Tip: When entering text, use the Left or Right Navigation key to mark the position of the cursor.
14. Display shows all the information needed to operate your phone, such as
the received signal strength, phone battery level, and time.
17
Closed View of Your Phone
Closed View of Your Phone
The following illustrations show the external elements of your phone
1. Power/Accessory
Interface
connector
3. External display
2. Camera key
1. Power/Accessory Interface connector allows you to connect a power
cable or optional accessories, such as a USB/data cable or a hands-free
headset for convenient, hands-free conversations.
2. Camera key allows you to take pictures when you are in camera mode.
Launches the camera with a press.
3. External display shows the received signal strength, phone battery level,
and the time and date.
Understanding Your Phone
18
Rear View of Your Phone
The following illustrations show the camera lens.
1. Camera lens
2. External Speaker
1. Camera lens is used to take pictures.
2. External Speaker allows you to hear the different ring tones/sounds, work
with the speakerphone, and to hear audio during a video playback.
Display Layout
Your phone’s display screen provides a wealth of information about your phone’s
status and options. When the backlight turns on, both the display turns on and the
keypad is illuminated. This display indicates when you receive either an incoming
call or message and also displays any alarms for the specified time. The display also
shows the date and current time as a digital clock. The display has three main areas:
Icons
Text and graphics area
Menu
19
t-zones
Soft key function indicators
Display Layout
Icons
This list identifies the symbols you’ll see on your phone’s display screen:
Displays the received signal strength. The greater the number of bars, the
stronger the signal.
Displays the UMA signal strength. The greater the number of bars, the
stronger the signal.
Displays when a microSD card is detected.
Displays when a new text message was received.
Displays when a new multimedia message was received.
Displays when you set an alarm to ring at a specified time. For more details,
see "Alarm" on page 129.
Displays when you are out of your service area.
Displays when a call is in progress.
Displays when the Call Forwarding feature is active. For more details, see
"Call forwarding" on page 106.
Displays when Alert type is vibration or you set the phone to vibrate when
you receive a call.
Displays when the speaker is enabled during an active call.
Displays when Mute is enabled during an active call.
Displays when Silent Mode is active.
Displays while your phone is synchronizing data with the network.
Shows the level of your battery. The more bars you see, the more power
remains.
Displays when Bluetooth wireless technology is active.
Understanding Your Phone
20
Backlight
A backlight illuminates the display and the keypad. When you press any key, the
backlight comes on. It goes off when no keys are pressed within a given period of
time, depending on the setting within the Backlight menu. The display turns off
after one minute to conserve battery power.
The On setting is how long the keypad backlight is on. The Dim option is how much
longer after the keypad backlight goes off that the display remains lit.
To specify the length of time the backlight is active, access the Backlight menu:
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Display settings option and press the Select
the
soft key or
key.
4. Highlight the Backlight option and press the Select
soft key or the
key.
5. Highlight the On option. Use the Left or Right Navigation key to select the
time the backlight is on. You may choose between 15 sec, 30 sec, 1 min,
3 min, or 10 min.
6. Press the Down key to take you to the Dim option. Use the Left or Right
Navigation key to select the time the Dimming mode is on. You may choose
between Off, 15 sec, 30 sec, 1min, 3 min, or 10 min.
7. Press the Save soft key to retain your new settings.
21
Help
Help
Help is designed to work with t-zones to show you some of the unique features of
your phone. You can search help files on the fly while traveling, at home or
anywhere, using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Help icon. Press the Select
key or the
soft
key.
3. The T-Mobile Help menu displays with the following options available:
• Browse Help Topics: this option gives you a list of different topics from which
you can select.
• Enter a Search: this option allows you to search based on a keyword.
• My Account: this option provides you with account specific information such as
your current status, current activity, Bill Summary, Plan & Services, Voicemail
Settings, Find a Retail Store, and FAQ’s & Info.
• About: this option offers general information about T-Mobile Help including
concept and site design, copyright information, and contact email address.
To access the browser options menu:
䊳
Press the Options soft key.
- Or Highlight the Openwave icon at the top left of the page by pressing the
Up or Down keys and then press the
key.
Note: The menus may vary, depending on your t-zones subscription.
For more information on browser options, see "Selecting and Using Menu Options"
on page 161.
Understanding Your Phone
22
Section 3: Wi-Fi
Topics Covered
• Introducing Your T-Mobile HotSpot @Home Capable Phone
• Connecting to Wi-Fi for the First Time
• Using Wi-Fi
• Connecting to Wi-Fi Networks
• Get Security Key
• Use Get Security Key
• Add New Network
• Add From Available Network Option
• Add Manually
• Troubleshooting
• T-Mobile Wi-Fi Help
This section introduces you to T-Mobile Wi-Fi compatibility and provides information
on Wi-Fi and instructions on how to use this type of connection with your phone.
Introducing Your T-Mobile HotSpot @Home
Capable Phone
Your phone is capable of connecting to T-Mobile via Wi-Fi (wireless Internet
broadband) and GSM (cellular towers). When making voice calls or using data
connections, your phone seamlessly transfers between Wi-Fi and GSM connections,
always using the network with the best signal strength.
Your T-Mobile Wi-Fi compatible phone is capable of the following:
• Connect to Wi-Fi at Home
Connect to T-Mobile through Wi-Fi if you have a wireless router set up in
your home. Refer to the Get Started Poster (provided with your phone) and
the User Guide for your wireless router for more information.
23
Introducing Your T-Mobile HotSpot @Home Capable Phone
• Connect to Wi-Fi while you're on the go (hotspots)
Connect to T-Mobile HotSpot locations all across the U.S. without needing
a T-Mobile HotSpot username and password as well as any open Wi-Fi
access point.
• Connect to GSM
Connect to the GSM network when Wi-Fi is not available or if you are not
interested in connecting to Wi-Fi.
Here's How it Works
Rather than using GSM radio as your phone normally would to connect to cellular
towers, your T-Mobile Wi-Fi compatible phone uses UMA (Unlicensed Mobile Access)
technology to use a wireless broadband Internet connection for your mobile phone
services. This includes voice calls, mobile browsing, e-mail, Picture Messaging, Text
Messaging, and basically any mobile service for which your phone uses a network
connection.
UMA technology offers fast, reliable connectivity using your mobile phone for
virtually all of your communications. UMA connects your mobile phone to your GSM/
GPRS services through WLAN (802.11) and allows you to handle calls, send and
receive messages, and check your e-mail. This technology allows you to use your
mobile phone in all of the ways you normally do. The only difference with using UMA
technology is that you are connecting through a wireless broadband Internet
connection (Wi-Fi).
What is Wi-Fi?
Wi-Fi, or Wireless Fidelity, is a term that is used generically to refer to any product or
service using any type of 802.11 technology. Wi-Fi networks operate in the
unlicensed 2.4 GHz radio bands, operating at up to an 11 Mbps (802.11b) or 54
Mbps (802.11g) data rate.
Wi-Fi enabled devices (laptops and PDAs as well as UMA phones) can send and
receive data wirelessly from any location equipped with Wi-Fi access. This is
accomplished using wireless routers, installed within a Wi-Fi location. A wireless
router transmits an RF signal to Wi-Fi enabled devices that are within range of the
router. Depending on the particular router, its range is usually about 300 feet. The
speed of the transmission is governed by the speed of the internet connection fed
into the wireless router.
Wi-Fi
24
What This Means to You
When you are not in range of a Wi-Fi connection, your normal cellular network takes
over and keeps you connected. Your phone switches automatically from Wi-Fi to
cellular whenever it's necessary to maintain your connection, whether your phone is
in Idle mode or in the middle of an active call. The switching process is virtually
unnoticeable.
Warning!: 9-1-1 Emergency Service available over Wi-Fi may be limited (it won’t work during electrical
power or broadband outages). Before using this phone to make calls over Wi-Fi, you MUST
provide us with the primary street address where you will use HotSpot @Home service, and you
must furnish us with any address changes. Refer to T-Mobile’s Terms and Conditions for other
limitations and information.
Connecting to Wi-Fi for the First Time
Important!: You must set up your wireless router first before using your phone to connect to Wi-Fi. For
T-Mobile routers, run the CD that comes with the router and follow its instructions. If you have
a different router, follow its installation procedures and confirm the router is set up properly.
1. Press and hold the
key to power on your phone.
2. Your phone displays a tutorial prompt. Select Yes to run the brief tutorial.
3. At the end of the tutorial, your phone detects a Wi-Fi network and attempts
to connect to it. If your router requires a security key, it prompts you to
enter it. For T-Mobile routers, select Get Security Key, which automatically
provides security keys for T-Mobile routers (see "Get Security Key" on
page 33.)
25
Using Wi-Fi
If you have a T-Mobile router, select Yes. This action acquires the security
key or passphrase so that you are not required to manually type it into your
phone.
If you do not have a T-Mobile router, select No. You are then required to
enter your key or passphrase.
If you are not sure what your key or passphrase (WEP or WPA encryption)
is, please refer to your router documentation. (For T-Mobile routers see
"Get Security Key" on page 33.
4. Save the network when prompted. After the network saves to your Saved
Networks list, you automatically connect to that network each time you are
within range. For more information, refer to "Saved Networks" on page
30.
You are connected to your first Wi-Fi network and can begin making calls using Wi-Fi
or your regular T-Mobile GSM network.
To access all of the Wi-Fi features on your phone, go to Menu > Settings > Wi-Fi.
If the Tutorial does not display on your phone, see "Connecting to Wi-Fi Networks"
on page 27.
Using Wi-Fi
Once set up for Wi-Fi connectivity, your phone automatically uses Wi-Fi, when
available, for all your mobile phone services. You simply use your phone in a normal
manner; there is nothing special you need to do. Your phone switches automatically
between Wi-Fi and cellular whenever it's necessary to maintain your connection,
whether your phone is idle or on an active call. When connected to Wi-Fi, the signal
bars change and the wireless network name displays in the upper left of the idle
screen as shown in the following illustration.
Wi-Fi signal bars
Wireless
network name
@Home48C2
Wi-Fi
26
The signal bars are always visible when a call is active. The bars change correctly
when you are on a call to indicate which network you are on. The name of your
network displays on the idle screen as seen here.
Connecting to Wi-Fi Networks
Connecting to Wi-Fi networks with your phone allows you to make calls using Wi-Fi.
The following features were designed to keep you connected to the networks you
want:
• View available networks
• View saved networks that you use often
• Find open networks quickly (Quick Connect)
Available Networks
This list of available networks displays all the available Wi-Fi networks to which you
can connect. The networks are listed in the order of their signal strength, from the
strongest signal to the weakest.
Note: If you want to connect to a secure network (marked by a key icon), you are prompted to provide the
security key for that network. If you change the router settings, you can edit the phone's profile with
the new setting or you can create a new phone profile.
signal-strength
indicates that a network is connected.
indicates that a network was saved to your Saved Networks list (see
next section for details).
indicates that a network is protected with a security key. For more
information, refer to "Get Security Key" on page 33.
Note: Set up your wireless router first. For T-Mobile routers, run the CD that comes with the router and
follow its instructions. If you have a different router, follow its installation procedures and confirm the
router is set up properly.
27
Connecting to Wi-Fi Networks
Connect to Wi-Fi from the Available Networks
1. From the idle screen, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, highlight Settings and press the Select soft key
to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key or the
key.
4. Highlight the Available Networks option and press the Select soft key or
the
key.
5. The phone searches for all available networks and then displays a list of
available networks.
6. Highlight the network to which you want to connect and press the Options
soft key. Highlight the Connect option, and press the Select soft key or
the
key. Once you have established an active connection, you are
prompted to save the network.
7. When prompted, press the Yes soft key to save the network to your Saved
Networks list.
8. Create a profile name for your network, press the Options soft key, select
Save and press the Select soft key or the
key.
Wi-Fi
28
After the network saves to your Saved Networks list, you automatically
connect to that network each time you are within range (see "Saved
Networks" on page 30.)
On the Available Networks list, a checkmark indicates a network to which you are
currently connected, a star indicates a saved network, and a key indicates a network
is protected with a security key.
current network connection
stored network
security key protected
signal-strength
Note: Press the Back soft key from the Available Networks list to return to the Wi-Fi menu.
Available Networks Options
From the Available Networks menu, press the Options soft key to use the following
options:
• Connect: Connects your phone to the currently highlighted network. This option
will not be available if your phone is currently connected to a Wi-Fi network.
Alternatively, you can connect to a network on the Available by highlighting the
network Networks list by highlighting the network and pressing the Select soft
key.
• Refresh: Refreshes the list of available networks to include any recent changes,
for example new Wi-Fi networks recently set up or others that were removed from
service.
29
Connecting to Wi-Fi Networks
• View details: Displays the details for the currently highlighted Wi-Fi network. This
also includes the MAC address of the phone if needed for MAC address filtering.
• Save: Saves the selected network to your Saved Networks List. This option
displays only if the network is not already saved.
Saved Networks
The Saved Networks list displays all of the Wi-Fi networks that are saved on your
phone. If you set up your phone for automatic connections, you automatically
connect to a Wi-Fi network on your Saved Networks List each time you are within
range of that network. On the Saved Networks List, a
indicates a network to
which you are currently connected.
Important!: Networks displayed on the Saved Networks List are networks that are saved and not
necessarily those that are in range and available. Editing a saved network's profile name will
not affect the ability to connect to that network. However, changing the SSID field or security
settings will impact the ability to connect.
If you change the router settings, you can edit the phone's profile with the new setting or you
can create a new phone profile.
Note: The Samsung phone has 2 Default profiles on the Saved Networks list: HotSpot and @Home. This
will allow the phone to automatically connect at the T-Mobile HotSpot locations and out-of-the-box to
your unsecured T-Mobile router.
Connect to a Specific Saved Network
1. From the idle screen, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key or the
key.
4. Highlight the Saved Networks option and press the Select soft key or the
key. The phone displays your Saved Networks list.
5. Highlight the network to which you want to connect and press Options >
Connect. Your phone connects to the Wi-Fi network if it is available.
6. On the Saved Networks list, a checkmark then indicates a network to
which you are currently connected.
Note: Press the Back soft key from the Saved Networks list to return to the Wi-Fi menu.
Wi-Fi
30
Saved Networks Options
In the Saved Networks menu, press the Options soft key to use the following
options:
• Edit Details: Allows you to edit the highlighted Wi-Fi network's parameters. Note
that this option is not available for your T-Mobile-designated Wi-Fi network
profiles.
• Connect: Connects your phone to the currently highlighted network. This option
will not be available if your phone is currently connected to a Wi-Fi network.
Alternatively, you can connect to a network on the Saved Networks list.
• Delete: Deletes the selected network from the Saved Networks list. Note that this
option is not available for your T-Mobile-designated Wi-Fi network profiles.
• Forward Settings: Sends the highlighted network's settings to another user. Note
that this option is not available for your T-Mobile designated Wi-Fi network
profiles.
• Change Priority: Lets you change the order of the Wi-Fi networks to which your
phone attempts to connect. Connections to networks with a higher priority are
tried first.
• Add new: Adds a new network to your Saved Networks list. This option also allows
you to manually add settings for the new network. The submenu items for the Add
New menu are as follows:
- From Available Networks: Allows you to add a new network from the list of
Available Networks.
- Create Manually: Allows you to manually enter the new network's settings. You’ll
need the following information: Wi-Fi name, SSID, and Security (encryption) Type
used.
31
Connecting to Wi-Fi Networks
Quick Connect
Select the Quick Connect option from the Wi-Fi menu to scan for any available
preferred or open Wi-Fi network and connect to the network with the best signal
strength. This feature allows you to make a quick Wi-Fi connection in instances
where you know you are within range of an open Wi-Fi network.
Note: Quick Connect will not attempt to connect to closed or secured wireless networks that are not part of
the Saved Networks List.
Use Quick Connect
䊳
From the Idle screen, press and hold the
to the strongest Wi-Fi network within range.
key. Your phone connects
Use the following steps for another method to access the Quick Connect option:
1. From the Idle screen, press the Menu soft key to access Menu mode and
proceed through the following steps:
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key or the
key.
4. Highlight the Quick Connect option and press the Select soft key or the
key.
5. Your phone connects to the strongest Wi-Fi network available.
Note: If the Quick Connect option is selected when your phone is in Sleep mode (Wi-Fi OFF), the phone
automatically switches to Active Mode (Wi-Fi ON) before attempting to make the connection.
Wi-Fi
32
Turn Wi-Fi On/Off
Select the Turn Wi-Fi ON/OFF option from the Wi-Fi menu to activate/deactivate the
Wi-Fi feature. Your phone's default state is Wi-Fi On (Active Mode). Wi-Fi should be
left on to take advantage of the seamless transfer between regular cellular networks.
Wi-Fi is On
Wi-Fi is Off
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Turn Wi-Fi ON/OFF option and press the Select soft key.
Note: If the Quick Connect option is selected when your phone is in Sleep mode (Wi-Fi OFF), the phone
automatically switches to Active mode (Wi-Fi ON) before attempting to make the connection.
Get Security Key
Get Security Key option can only be used with a T-Mobile wireless router. Select the
Get Security Key option from the Wi-Fi menu to acquire the security key for a
T-Mobile Wi-Fi compatible phone from a T-Mobile wireless router. This feature is
about exchanging security information between a T-Mobile router and a T-Mobile
Wi-Fi phone.
When used with an open network, the Get Security Key process creates a WPA key
on the router. This key is automatically transferred to the phone. Manually configure
all laptops and devices connected wirelessly for the new security. When used on an
already secured network, the key configured on the router is transferred to the
phone. For the duration of the process (for example, while the
on the router is
blinking), all laptops and devices using the wireless network lose their connection.
33
Use Get Security Key
For T-Mobile routers without encryption enabled, following this sequence turns on
WPA and sends the security key to your T-Mobile phone. If encryption is enabled, the
light is constantly lit on the T-Mobile router, and the current router settings are sent
to the phone.
Note: If you change the router settings, you can edit the phone's profile with the new setting or you can
create a new phone profile.
Get Security Key option can only be used with a T-Mobile wireless router. Select the
Get Security Key option from the Wi-Fi menu to acquire automatic security keys for
a T-Mobile Wi-Fi compatible phone from a T-Mobile wireless router.
Use Get Security Key
1. From the Idle screen, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key or the
key.
4. Highlight the Get Security Key option and press the Select soft key or
the
key.
5. Follow the on-screen prompts to step through the process of acquiring
security keys.
This process involves pressing the secure button on the front of the router. You can
identify the secure button by the
on, or adjacent to the button. The key /
passphrase is stored with the profile on your Saved Networks list. The phone tries to
connect to a network after successfully securing the key.
Wi-Fi
34
You can also enter a security key manually in the phone. If connecting via available
networks, the phone prompts you to enter the key for WEP or passphrase for WPA.
You can also follow the steps for manually adding a network seen in a subsequent
section of the manual. When entering a security key, if numbers are part of the key,
press and hold the desired key to quickly access the number, this bypasses the
multi-tap text entry mode.
In order to view the security key, you may need to log into your wireless router's
administrative site. If you printed or saved your settings when setting up your router,
you may reference this as well.
Add New Network
By adding a network to your phone, you can automatically connect to the network
when you are in range. If it requires a security key or passphrase, you can enter the
key and the phone stores the key or passphrase with the profile.
You can add a new network using one of the following methods:
• When connecting to a network from Available Networks, select to save when
prompted
• Select Add New Network > From Available Networks
• Select Add New Network > Create Manually
35
Add From Available Network Option
Add From Available Network Option
To add a new network to your Saved Networks list from your list of available
networks:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key or the
key.
4. Highlight the Add New Network option and press the Select soft key or
the
key.
5. Highlight the From Available Networks option and press the Select soft
key. The phone searches for available networks and displays a list of
networks in signal-strength order.
6. Highlight the network you want and press the Save soft key. To give the
network a new name before saving it, use the Cancel
the name and then type a new network name.
7. Press the
key to delete
key to save the new network.
Add Manually
To manually add a new network to your Saved Networks list:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Add New Network option and press the Select soft key.
5. Highlight the Create Manually option and press the Select soft key.
6. Type your desired profile name for the network.
7. Press the Down key to highlight the SSID option. Enter the new network's
SSID: option.
The SSID (Service Set Identifier), is the actual name of the wireless
network, not the profile name you entered. The profile name is simply a
name to help you keep track of which network is which. The SSID is a key
piece of information needed to locate and connect to a wireless network.
Wi-Fi
36
8. Press the Down key to highlight the Security Type option. Press the Left
or Right key to set to KEY NONE, WEP 64 bit, WEP 128 bit, WPA-PSK, or
WPA2-PSK. The Key field only becomes active if you choose an option
other than None.
Note: The Security Type refers to the particular security protocol being used for a specific wireless network.
WPA is the current security standard for wireless networks and is recommended by T-Mobile. WEP is
an older, and less robust security standard, but it provides wider compatibility.
9. Press the Down key to highlight the Key: option. For information on the key
required, see "Use Get Security Key" on page 34.
10. Press the Down key to highlight Connection Settings. Press the Left or
Right key to set to Automatically Connect, or Don’t automatically
connect.
11. Press the Down key to highlight the Non-Broadcast SSID option. Press
the
key to place a checkmark in this box if your router does NOT
broadcast its SSID. In general, the default setting for most routers will
broadcast the SSID.
12. Press the Down key to highlight the Inter AP handovers option.
13. Press the
key to place a checkmark in this box if you want your phone
to perform a fast handoff (for quicker authentication).
14. Press the Down key to highlight the IP setting option. Press the Left or
Right key to set to Dynamic or Static. Dynamic is the standard and
recommended setting.
If you select Static in this step, press the Down key to highlight the IP
address option. Press the
key to enter the IP address menu. If you are
using a T-Mobile Router, copy the information regarding the Subnet Mask,
DNS Server, and Gateway from your router into your phone. The IP address
you input must be different from the one you use to access the router. If
you are connected to a Wi-Fi network that requires Static IP addresses
(usually in a corporate environment), please see your System Administrator
to get the required information.
15. When finished, press the Save soft key.
37
Troubleshooting
Troubleshooting
This section provides resources for determining solutions to problems or issues that
may occur with your T-Mobile Wi-Fi compatible phone.
T-Mobile Wi-Fi Help
Use the following steps to select the Wi-Fi Help option from the Wi-Fi menu and get
specific Wi-Fi assistance.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Wi-Fi Help option and press the Select soft key.
Wi-Fi
38
Section 4: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Records
• Silent Mode
• Selecting Functions and Options
This section describes how to make or answer a call. It also explains the features and
functionality associated with making or answering a call. For more information on
Ringtones see "Ring tone" on page 101. For more information on Call Forwarding see
"Call forwarding" on page 106.
Making a Call
When the idle screen displays, enter the number you wish to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu, the phone automatically
redials up to 10 times when the person does not answer the call or is already on the phone, provided
your call is not sent to voice mail. For more information, refer to "Extra settings" on page 96.
Making an International Call
Note: Contact your service provider to determine if this service is activated.
1. Press and hold the
key. The + character displays.
2. Enter the country code, area code, and phone number.
3. Press the
39
key to make the call.
Making a Call
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or Right Navigation
key until the cursor is immediately to the right of the digit to be cleared and
then press the
key. You can also enter a missing digit.
3. To clear the whole display, press and hold the
key.
Ending a Call
䊳
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed, received, or missed if the
caller is identified.
To recall any of these numbers:
1. Press the
key to return to Idle mode (if you typed characters on
the display).
2. Press the
key to display a list of the most recent numbers used in the
order you dialed or received them.
3. Use the Up and Down Navigation keys to scroll through the numbers and
highlight the number you want.
4. To view details of the number, such as Caller ID and call logs, press
the
key.
Before you dial the number, press the Options soft key to display the
following options:
• Call back: Places a call back to the number.
• Send message: Allows you to send a Text message, Picture message, or
Voice note to the number.
• Save to Phonebook: Stores the number in your Phone memory, onto your
SIM card, or your SIM card(FDN).
• Delete: Allows you to delete the Selected number or All call records.
• Add to block list: Allows you to block the selected number from being received
as an incoming call.
5. To dial the number, press the
key.
Call Functions
40
Making a Call from the Phonebook
You can store regularly used phone numbers into the phone’s memory or onto your
SIM card. These entries are collectively called the Phonebook.
Once you store a number in the Phonebook, you can press only a few key to dial the
stored number. By using the Speed Dial feature you can also assign your most
frequently-used numbers to number keys.
For more information, refer to "Understanding Your Phonebook" on page 65.
Adjusting the Call Volume
During a call, use the Volume keys on the left side of the phone, to adjust the
speaker volume.
䊳
Press the
key to increase the volume level and the
key to decrease
the speaker volume level.
In Idle mode, you can also adjust the ring volume using these keys.
• These keys can also be used to scroll up or down a listing of items such as a
menu list, contacts list, etc.
Answering a Call
When somebody calls you, the phone rings and displays the incoming call image.
The caller’s phone number, or name if stored in Phonebook, is displayed.
1. Press the
key or the Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra Settings menu is activated, you
can press any key to answer a call except for the
key.
Note: To reject an incoming call, press the Reject soft key or
2. Press the
key.
key to end the call.
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone
returns to the function screen you were previously using.
Call Records
All incoming, outgoing and missed calls are listed in the Call Records. You can also
view Call time records.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Call records icon and press the
Select soft key or the
41
key to enter the menu.
Call Records
Note: While in Idle mode, press the
key to access your call records (All calls, Missed calls,
Incoming calls, and Outgoing calls).
The following Call Record options are available:
All calls
This menu lets you view the 90 most recent calls you received, dialed, and missed.
The name or number, if already stored in your Phonebook, displays with the number
of occurrences for each number.
Note: At any time while you are in Call Records, you may use the Left or Right Navigation keys to scroll
between All calls, Missed calls, Incoming calls, and Outgoing calls.
Missed calls
This menu lets you view the 30 most recent calls you received, but did not answer.
The name and number, if already stored in your Phonebook, displays with the
number of occurrences for each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you can find out who is calling
you, if this service is available, so that you can call the person back.
The number of calls you missed displays on the idle screen immediately after a call
is missed.
To view a missed call immediately:
1. If the display is off, press the volume key to turn the display on. The Missed
call tab appears on the display.
2. Press the View soft key.
The number corresponding to the most recently missed call is displayed first (top of
list).
3. To scroll through these missed calls, press the Up or Down Navigation key.
4. To call a particular number, highlight the entry and press the
key.
- Or Highlight a number from the list and press the Options soft key for the
following options:
• Details: Displays details of the missed call including name, number, dates and
times of the calls.
• Call back: Places a call back to the number.
Call Functions
42
• Send message: Allows you to send a Text message, Picture message, or Voice
note back to the missed number.
• Save to Phonebook: Stores the number in your Phone memory onto your SIM
card, or your SIM card(FDN).
• Delete: Allows you to delete the selected number or delete all call records.
• Add to block list: Allows you to block the selected number from being received
as an incoming call.
Note: You can press the
key at any time to exit the Missed Call feature.
Incoming calls
This menu lets you view the 30 most recent calls you received.
The name and number, if already stored in your Phonebook, is then displayed with
the number of occurrences for each number.
Outgoing calls
This menu lets you view the 30 most recent calls you dialed.
The name and number, if already stored in your Phonebook, is then displayed with
the number of occurrences for each number.
Delete all
This menu allows you to delete all of the records in each call type separately, or you
can delete all of your call types at one time.
1. Highlight the type of calls you want to delete (All calls, Missed calls,
Incoming calls, or Outgoing calls) and press the
mark adjacent to an category entry.
key to place a check
Note: Selecting the All calls check box automatically selects all the entries in the Delete all menu.
2. Press the Delete soft key to delete the calls.
3. When a confirmation message displays, press the Yes soft key or
to confirm.
43
key
Silent Mode
Call time
This menu lets you view the time log for calls both made and received.
Note: The actual time invoiced by T-Mobile may differ from times displayed due to network features and
service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total outgoing: shows the total length of all calls made since the timer was
last reset.
• Total incoming: shows the total length of all calls received since the timer was
last reset.
• Life time is: shows the total length of time for both incoming and outgoing calls.
The length of call time must be at least 1 minute to increment this field. You
cannot clear this information.
Silent Mode
Silent Mode is convenient when you wish to stop the phone from making any noise,
(in a theater for example).
In Idle mode, press and hold the
key until the “Silent Mode On” message and
the Silent Mode icon (
) display. In Silent Mode, instead of sounds, your phone
vibrates.
To exit and reactivate the previous sound settings, press and hold the
key
again until the “Exit Silent Mode” message displays. The Silent Mode icon (
) is
no longer displayed.
Selecting Functions and Options
Your phone offers a set of customizable functions. These functions are arranged in
menus and sub-menus, and accessed using the two soft keys. Each menu and
submenu allows you to view and alter the settings of a particular function.
Call Functions
44
Soft Keys
The roles of the soft keys vary depending on the function you are currently using.
The labels on the bottom line of the display just above each key indicate their current
role.
Selecting Options
To view the various functions and options available, you must select the one you
want by:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted, press the Select
soft key or the
key.
3. To view the next function or highlight the next option on a list, press the
Down Navigation key.
4. To move back to the previous function or option on a list, press the Up key.
5. To move back up one level in the menu structure, press the Back soft key.
6. To exit the menu structure without changing the settings, press the
key.
In some functions, you are asked for a password or PIN. Enter the correct code and
press the OK soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it.
45
Selecting Functions and Options
Options During a Call
Your phone provides a number of control functions that are available for use during a
call.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to a person in the room but do not want the person on the phone to
hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. Select the Mute option and press the Select soft key or the
other person can no longer hear you. The Mute icon (
displayed at the bottom left of the screen.
key. The
) is then
To switch the microphone back on:
䊳
Press the Options soft key. Select the Unmute option and press the Select
soft key or the
key. The other person can hear you again. The
icon is then displayed at the bottom left of the screen.
Putting a Call on Hold
You can place the current call on hold whenever you want. If your network supports
this service, you can also make another call while a call is in progress.
To place a call on hold:
1. Press the Options soft key, highlight the Hold option, then press the Select
soft key or the
key.
2. Press the Resume soft key to reactivate the call.
To make a new call while a call is in progress:
1. Enter the new phone number that you wish to dial or look it up in the
Contact list.
2. Press the
key to dial the second call.
The first call is then automatically put on hold.
- Or -
Call Functions
46
1. Press the Options soft key, select Hold, and press the
key. This
places the currently active call on hold and allows you to make a new call.
2. Make the second call in the normal way.
When there is an active call and a call on hold, you may switch between the two
calls by placing the current held call to active and then placing the other call on hold.
To switch between the two calls:
1. Press the Options soft key, select Swap, and press the
key. The
current active call is placed on hold and the call on hold is then reactivated
so that you can continue conversing with that person.
2. Press the
key when you are finished or want to end the call.
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1. Press the Spkr on soft key.
2. To turn the Speakerphone off, press the Spkr off soft key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Keypad tone option is
Off, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones of the
keys, which then allows you to press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send DTMF
option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down Navigation key to highlight Phonebook and press the
key.
3. Press the Down Navigation key to highlight the Contact list option and
press the Select soft key or the
47
key.
Selecting Functions and Options
With the Phonebook entries then listed:
4. Enter the name that you wish to find in the textbox located above the
entries. If you enter the first few letters of the name, the Phonebook entries
are listed starting with the first entry matching your input.
- Or Use the Up or Down Navigation key to highlight the contact that you
desire.
5. To view the highlighted entry, press the Options soft key.
6. Highlight the View option and press the Select soft key or the
key. The Contact information displays.
For further details about the Phonebook feature, see "Finding a Phonebook Entry"
on page 69.
Call Waiting
The Call waiting option must be set to Activate before you can answer an incoming
call while another call is in progress. For more information, refer to "Call waiting" on
page 107.
You are then notified of an incoming call with a call waiting tone.
To answer a new call while another call is in progress:
1. Press either the Accept soft key or the
key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key, highlight
Swap and press the Select soft key or the
key.
3. To end a call on hold, press the Options soft key and select the End held
call option. Then press the Select soft key or the
4. To end the current/remaining call, press the
key.
key.
Making a Multi-Party Call
A multi-party call is a network service that allows up to six people to take part
simultaneously in a multi-party or conference call.
For further details about subscribing to this service, contact T-Mobile customer
service.
Call Functions
48
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Press the Options soft key and select the New call option.
3. Call the second participant in the normal way. The first call is automatically
placed on hold.
4. To join the first participant to this multi-party call, press the Options soft
key and select Join. Press the Select soft key or the
key.
Note: These first two calls are then grouped together on screen and displayed with an adjacent number
corresponding to the order in which the calls were made.
5. Press the Options soft key and then select the New call option to add a
new person to a second multi-party call group.
6. Press the Options soft key or the
press the Select soft key or the
key. Select the Join option and
key.
Note: There are a maximum of two callers that can be joined to a single multi-party line. Additional callers
would participate in a new Multiparty session which can be held in conjunction with the previous
multiparty call. Each of these multi-party calls can then be placed on hold or swapped.
Having a Private Conversation With One Participant
When there are two participants in a multi-party session, it might be necessary to
place one of those participants on hold so that a private conversation can be held
with a single caller. While you are in a multi-party call:
1. Press the Options soft key and choose the Split option. Press the Select
soft key or the
key.
The short list of call participants then displays with the first caller selected.
2. Press the Up or Down Navigation key to highlight the person with which
you want to talk privately, and press the Select soft key or the
key.
Note: You can now talk privately to that person while the other participants can continue to converse with
each other. If there is only one other participant, that person is then placed on hold.
3. To return to the multi-party call, press the Options soft key and select
Join. Press the Select soft key or the
key. All of the multi-party call
participants can now hear each other again.
49
Selecting Functions and Options
Dropping One Participant
1. Highlight the number you want to drop, press the Options soft key and
select End held call.
This option allows you to continue talking to the other participants.
2. Press the
key to end the multi-party call.
Call Functions
50
Section 5: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
You can tailor the phone’s range of functions to your needs using menus and
sub-menus. Menus and sub-menus can be accessed by scrolling using the
Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Scroll using the Navigation keys to reach a main menu
(for example: Settings). Press the Select soft key or the
the menu.
key to enter
3. If the menu contains sub-menus, (for example, Security), after
highlighting the sub menu, press the Select soft key or the
access it.
key to
If the menu you selected contains further options, repeat this step.
4. To scroll through the menus, press the Up or Down Navigation keys.
5. To confirm the chosen setting, press the Select soft key, or the
key.
6. To return to the previous menu level, press the Back soft key, or the
key.
7. To exit the menu without changing the settings, press the
51
key.
Menu Outline
Using Shortcuts
The menu items, such as menus, sub-menus, and options, are numbered and can
be accessed quickly by using their shortcut numbers. For the main menus, press the
corresponding number keys (1 to 0) to access any one of the shortcuts.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Security.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
Important!: This menu navigation tree does NOT include or list UMA features.
1: Voice note
2: Call records
2.1: All calls
2.2: Missed calls
2.3: Incoming calls
2.4: Outgoing calls
2.5: Delete all
2.6: Call time
3: t-zones
3.1: Home
3.2: Enter URL
3.2.1: Open
3.2.2: Select language
3.2.3: Cancel
3.3: Bookmarks
3.4: Clear cache
Menu Navigation
52
4: IM
4.1: AIM
4.1.1: Sign On
4.1.2: Saved conversations
4.1.3: Offline conversations
4.1.4: Preferences
4.1.4.1: Favorite IDs
4.1.4.2: Power on Sign On
4.1.4.3: Community settings
4.1.5: Help
4.2: ICQ
4.2.1: Connect
4.2.2: Saved conversations
4.2.3: Offline conversations
4.2.4: Preferences
4.2.4.1: Favorite IDs
4.2.4.2: Power on connect
4.2.4.3: Community settings
4.2.5: Help
4.3: Windows Live
4.3.1: Sign In
4.3.2: Saved conversations
4.3.3: Preferences
4.3.3.1: Favorite IDs
4.3.3.2: Power on sign in
4.3.3.3: Community settings
4.3.4: Help
4.4: Yahoo!
4.4.1: Sign in
4.4.2: Saved conversations
4.4.3: Preferences
4.4.3.1: Favorite IDs
4.4.3.2: Power on sign in
4.4.3.3: Community settings
4.4.4: Help
53
Menu Outline
5: Messages
5.1: Create new
5.1.1: Text message
5.1.2: Picture message
5.1.3: Voice note
5.2: Inbox
5.3: Outbox
5.4: Drafts
5.5: Templates
5.5.1: Text templates
5.5.2: Picture message templates
5.6: Voice mail
5.6.1: Call voice mail
5.6.2: Voice server number
5.6.2.1: Voice Mail
5.7: Delete all
5.8: Settings
5.8.1: Text message
5.8.2: Picture message
5.8.2.1: Send settings
5.8.2.2: Receive settings
5.9: Memory status
5.0: Broadcast messages**
6: Fun & Apps
6.1: Files
6.1.1: Sounds
6.1.1.1: Browse MegaTones
6.1.1.2: Browse HiFi Ringers
6.1.1.3: Sounds
6.1.1.4: Voice list
6.1.2: Images
6.1.2.1: Browse Wallpapers
6.1.2.2: Photos
6.1.2.3: My Album
Menu Navigation
54
6.1.2.4: My Journal
6.1.2.5: Downloaded images
6.1.3: Videos
6.1.3.1: Downloaded videos
6.1.3.2: Videos
6.1.4: Music
6.1.5: Other files
6.1.6: Memory status
6.2: Games
6.3: Music player
6.4: Camera
6.4.1: Take and Send
6.4.2: Record video
6.4.3: Photos
6.4.4: Videos
6.4.5: My Album
6.4.6: My Journal
6.5: Voice recognition
6.5.1: Choice lists
6.5.2: Sensitivity
6.5.3: Digit dialing
6.5.4: Sound
6.5.5: About
6.6: Organizer
6.6.1: Alarm
6.6.2: Calendar
6.6.2.1: Month view
6.6.2.2: Week view
6.6.2.3: Day view
6.6.2.4: Schedule
6.6.2.5: Anniversary
6.6.2.6: Miscellaneous
6.6.2.7: Missed alarm events
6.6.2.8: Memory status
6.6.3: Tasks
55
Menu Outline
6.6.4: Notes
6.6.4.1: Create
6.6.5: Calculator
6.6.6: Tip calculator
6.6.7: World Time
6.6.7.1: Save
6.6.7.2: Apply daylight saving time
6.6.8: Synchronization
6.6.9: Unit conversion
6.6.9.1: Currency
6.6.9.2: Length
6.6.9.3: Weight
6.6.9.4: Volume
6.6.9.5: Area
6.6.9.6: Temperature
6.6.0: Timer
6.6.*: Stopwatch
6.7: Image editor
6.7.1: New image
7: Help
8: Phonebook
8.1: Add new contact
8.2: Contact list
8.3: Groups
8.4: Speed dial
8.5: Block list
8.5.1: Add new
8.5.2: Remove
8.6: Management
8.6.1: View contacts
8.6.2: Default saving
8.6.3: Copy all to
8.6.4: Sort by contacts
Menu Navigation
56
8.6.5: Delete all
8.6.6: Memory status
8.7: Own number
8.8: FDN list
8.8.1: Add
9: Settings
9.1: Wi-Fi
9.1.1: Available Networks
9.1.2: Saved Networks
9.1.2.1: HotSpot
9.1.2.2: @Home
9.1.3: Quick Connect
9.1.4: Turn Wi-Fi OFF
9.1.5: Get Security Key
9.1.6: Add New Network
9.1.6.1: From Available Networks
9.1.6.2: Create Manually
9.1.7: Wi-Fi Help
9.2: Time & date
9.3: Phone settings
9.3.1: Language
9.3.2: Greeting message
9.3.3: Slide settings
9.3.4: USB settings
9.3.5: Extra settings
9.3.6: Airplane mode
9.4: Display settings
9.4.1: Wallpaper
9.4.2: Info display
9.4.3: Skin
9.4.4: Brightness
9.4.5: Backlight
57
Menu Outline
9.4.6: Dialing display
9.4.6.1: Font size
9.4.6.2: Font color
9.4.6.3: Background color
9.4.7: Calendar
9.4.8: Show caller information
9.5: Bluetooth
9.5.1: Turn Bluetooth On
9.5.2: My devices
9.5.3: Bluetooth services
9.5.3.1: Headset
9.5.3.2: Handsfree
9.5.4: Help
9.6: Sound settings
9.6.1: Incoming call
9.6.2: Keypad tone
9.6.3: Msesage tone
9.6.4: Power on/off tone
9.6.5: Slide tone
9.6.6: Silent mode
9.6.7: Extra tones
9.7: Synchronization
9.8: Network services
9.8.1: Call forwarding
9.8.1.1: Forward always
9.8.1.2: Busy
9.8.1.3: No reply
9.8.1.4: Unreachable
9.8.1.5: Cancel all
9.8.2: Call barring**
9.8.3: Call waiting
9.8.3.1: Voice calls
9.8.3.2: Data calls
9.8.3.3: Cancel all
Menu Navigation
58
9.8.4: Network selection
9.8.4.1: Search now
9.8.4.2: Default setup
9.8.5: Caller ID
9.9: Security
9.9.1: PIN check
9.9.2: Change PIN
9.9.3: Phone lock
9.9.4: Change password
9.9.5: Lock application
9.9.6: FDN mode
9.9.7: Change PIN2
9.0: Software update
9.*: Memory status
9.*.1: Shared memory
9.*.2: Messages
9.*.3: Files
9.*.4: Calendar
9.*.5: Phonebook
9.*.6: Notes
9.#: Reset settings
** Displays only if supported by your SIM card.
59
Changing the Text Input Mode
Section 6: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Using ABC Mode
• Using Number Mode
• Using Symbol Mode
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text system to reduce the number of key strokes associated with entering text.
Changing the Text Input Mode
When using your phone, you often need to enter text, such as when storing a name
in your Phonebook, creating your personal greeting or scheduling events on your
calendar. You can enter alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes:
• T9 mode: this mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter; for example, you press
to
enter J, K, or L. However, the T9 mode automatically compares the series of
keystrokes you make with an internal linguistic dictionary to determine the most
likely word, thus requiring fewer keystrokes than the traditional ABC mode.
• ABC mode: this mode allows you to enter letters by pressing the key labeled with
the corresponding letter.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as punctuation
marks.
When you are in a field where you can enter characters, the text input mode
indicator displays at the bottom right of the screen.
Example: Writing a text message.
Entering Text
60
New message
Abc
Message text
160
Options
1/12
Send
Eng
1. Press the Right soft key (
Text Input Mode Indicators
) to change the text input mode.
Note: Each time you press the Right soft key, a different Text input mode indicator displays in the lower
right corner of your display.
The following options are available:
Eng
A Eng
1
Eng
: T9 mode
: ABC mode
: Number mode
Symbol mode (No symbol displayed)
2. Enter text in the text message box using the selected text input mode when
the Text input mode indicator that you desire displays.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any character using
single keystrokes. This text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, press the 2 to 9 keys to enter a word. Press
each key only once for each letter.
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
61
Using T9 Mode
The word that you type displays on the screen. The word may change with
each consecutive key that you press.
2. Enter the whole word before editing or deleting the keystrokes.
3. When the word correctly displays, go to step 4.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you pressed.
Example: Both the words “Of” and “Me” use the 6 and 3 keys. The phone displays the most commonly
used choice first.
4. Press the
key to insert a space and begin entering the next word.
To add a new word into the T9 dictionary:
1. Press the keys that correspond to the word you want to add and press the
key to display any alternative words.
2. Press the
key after the last alternative word displays. The word Spell
displays on the bottom right portion of the screen.
3. Press the Spell soft key or the
key.
4. Enter the word you want to add using ABC mode. For more information,
refer to "Changing the Text Input Mode" on page 60.
5. Press the OK soft key or the
key after you finish entering the new
word.
The word is added to the T9 dictionary and becomes a word for the
associated keypress series.
Note: This feature may not be available for some languages. The
key has some emoticons
associated with it. To enter other special characters within the T9 mode, press and hold the
key to cycle through these characters.
To enter periods, hyphens, apostrophes, and other special characters:
䊳
Press the
key and then press the
key to cycle through these
available characters.
T9 mode applies grammar rules to ensure that correct punctuation is used.
To shift case in T9 mode:
䊳
Press the
key
There are 3 cases: Initial capital, Capital lock, and Lower case.
Note: You can move the cursor by using the Navigation keys.
Entering Text
62
To delete characters:
䊳
Press the
key. Press and hold the
key to clear the display.
Using ABC Mode
To use ABC mode, use the 2 to 9 keys to enter your text.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
• To enter periods, hyphens, apostrophes, and other special characters, press
the
key. ABC mode applies grammar rules to ensure that correct
punctuation is used.
• To shift case in ABC mode, use the
key. There are 3 cases: Initial capital,
Capital lock, and Lower case.
Note: You can move the cursor by using the Navigation keys.
To delete letters:
䊳
Press the
key. Press and hold the
key to clear the display.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to automatically move to
the right, and then select the next letter.
Keys
By default, the first letter of an entry is capitalized and all consecutive letters are
kept in lowercase (unless the Shift key is used). After a character is entered, the
cursor automatically advances to the next space after two seconds or when you
enter a character on a different key.
63
Using Number Mode
Characters scroll in the following order (lowercase characters shown in
parentheses):
.@,-?!:()/1
P Q R S 7 (p q r s 7)
A B C 2 (a b c 2)
T U V 8 (t u v 8)
D E F 3 (d e f 3)
W X Y Z 9 (w x y z 9)
G H I 4 (g h i 4)
0 (Adds a space)
J K L 5 (j k l 5)
Symbol - Press and hold to access
Symbol grid (Spell Checker)
M N O 6 (m n o 6)
Shift (Toggles Lower/Uppercase)
Using Number Mode
The Number mode enables you to enter numbers into a text message.
䊳
Press the keys corresponding to the digits you want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and punctuation marks into text. To
display a list of symbols press and hold the
key.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down Navigation key.
3. To clear the symbol(s), press the
key. When the input field is empty,
this key returns the display to the previous mode.
4. To insert the symbol(s) into your message, press the OK soft key or the
key.
Entering Text
64
Section 7: Understanding Your Phonebook
Topics Covered
• Using Contacts List
• Adding a New Contact
• Storing a Number in the Phone’s Memory
• Storing a Number in the SIM Card
• Dialing a Number from the SIM Card
• Finding a Phonebook Entry
• Dialing a Number from Phonebook
• Speed Dialing
• Editing a Caller Group
• Block List
• Deleting all of the Phonebook Entries
• Management
• Own Number
• FDN List
This section explains how to use and manage your Phonebook. You can save phone
numbers to your phone’s memory or to your SIM card.
Using Contacts List
The Contacts List displays all the phone numbers and contact information stored on
both the phone’s memory and the SIM card. From this list you can manage your
phonebook entries by adding a new contact, storing a number in the phone’s
memory or on the SIM card, quickly locate and dial a contact phone number, edit a
caller group, or delete all of the numbers stored on the phone or SIM.
Note: When storing a Phonebook entry into your SIM card, note that only the Name, and Number are saved.
To save additional information for a particular contact, such as notes, e-mail, dates, etc., it is
important to save that Contact into your phone’s onboard memory.
65
Adding a New Contact
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Number in the Phone’s Memory
The default storage location for saving phone numbers to your phonebook is your
phone’s built-in memory. You can also save your numbers to your SIM card or setup
a default location so that whenever a new phonebook entry is created, you are
prompted to choose between Phone or SIM card. For information on how to change
this setting, see "Default Saving" on page 74.
Note: When you copy a phone number from your SIM card to your phone, the number displays twice in your
Contact list and each displays an icon that represents the location.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Scroll to Add new contact by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Enter a first name in the First Name text box. Press the Down key to tab to
the next text box.
For further details about how to enter characters, see "Using ABC Mode"
on page 63.
5. Enter a last name in the Last Name text box. Press the Down key to tab to
the next text box.
6. Highlight a number Type by pressing the Up or Down Navigation key, then
enter a number in the text box.
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the entry.
• Email: allows you to enter the email address for the contact.
• Picture ID: allows you to add a Picture ID assigned to the contact.
• Ringtone: allows you to assign a Ringtone by choosing from one of the following
locations: Default melodies, Voice list, Sounds, Music, or Do not assign (no
ringtone assigned to entry).
Understanding Your Phonebook
66
• Group: allows you to assign this contact to a group.
• Notes: allows you to enter additional information about the contact.
Up to 50 characters.
7. Press the Save soft key or press the Options soft key and highlight the
Save option and press the Select soft key or the
key. The number
saves to your phone and the new contact information displays.
8. To return to the Idle screen, press the
key.
Storing a Number in the SIM Card
The default storage location for saving phone numbers to your phonebook is your
phone’s built-in memory. To save a number to your SIM card, you need to change the
Default Saving option first. For information on how to change this setting, see
"Default Saving" on page 74.
Note: When storing a Phonebook entry into your SIM card, note that only the Name, and Number are saved.
To save additional information for a particular contact, such as notes, e-mail, dates, etc., it is
important to save that Contact into your phone’s onboard memory.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight Default saving and press the Select soft key or the
5. Highlight SIM card and press the Select soft key or the
key.
key.
Note: You can also set the Default saving option to Ask on saving in the Management menu. With this
option, you are prompted for a storage location each time you add a new contact. For more
information, refer to "Default Saving" on page 74.
6. Press the Back soft key until you return to the main screen
(Idle mode) or press the
key.
Now that your phone is set up to store contacts to your SIM card, follow this
procedure to store a number.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Highlight the Add new contact option and press the Select soft key or the
key.
67
Dialing a Number from the SIM Card
4. Enter a name for your contact into the Name field. A SIM card entry only
has one available name field. Press the Down key to tab to the next text
box.
For further details about how to enter characters, see "Using ABC Mode"
on page 63.
5. Use the keypad to enter a number into the contact Phone Number field.
Press the Save soft key or the
key. The number saves in your SIM
card. After storing, the phone displays the Phonebook entry you just
created.
6. To use the entry options after saving the number, highlight the Name field
and press the Options soft key.
The following options are available:
• Edit: allows you to edit the name and number fields in the entry.
• Send message: allows you to send a Text or Picture message, or send a Voice
note to the recipient.
• Call: allows you to call the newly created recipient.
• Copy to phone: allows you to copy the selected contacts’ information from the
SIM to the phone.
• Assign speed dial: allows you to assign the newly created SIM entry to a speed
dial location.
• Send name card: allows you to send your name card as an attachment to a
Text or Picture message.
• Delete: allows you to delete the name and number from the SIM card. You are
asked to confirm the name and number deletion by pressing the Yes soft key. To
cancel, press the No soft key.
• Add to block list: allows you to add the currently created contact entry to a list
of blocked numbers. These numbers are rejected by the phone.
7. Press the
key to return to the Idle mode.
Dialing a Number from the SIM Card
1. In Idle mode, press and hold the keypad corresponding to the speed dial
location number for the desired phone number you want to dial.
2. If you don’t know the location number, press
and the first
location number is displayed.
Press the Left or Right key to find other phone numbers stored in the SIM
card’s list.
3. Press either the Dial soft key, the
key, or the
key once you select
the number you want to dial.
Understanding Your Phonebook
68
Finding a Phonebook Entry
You can store phone numbers and their corresponding names onto either your SIM
card or phone’s built-in memory. They are physically separate but are used as a
single entity, called Phonebook.
Depending on the storage size of the particular SIM card, the maximum number of
phone numbers the card can store may differ.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon and press the
Select soft key or the
key to enter your Phonebook.
3. Highlight Contact list and press the Select soft key or the
key.
Note: Any contacts that were stored on the SIM card are displayed with a SIM card icon (
) to the left of
the entry. Contacts that were stored on the phone display with a Phone icon (
)to the left of the
entry.
4. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first entry matching
your input.
5. If needed, press the Up or Down Navigation key until the entry you want is
highlighted.
6. Once you locate the entry, press the
key to dial the number, or press
the Options soft key to access the following Phonebook entry options:
• View: shows details of the Phonebook entry.
• Edit: allows you to edit the Name and number for the selected contact.
• Send message: allows you to send a message to the selected number. You
may choose between Text message, Picture message, or Voice note.
• New contact: takes you to the Add new contact menu.
• Call: allows you to call the currently selected contact.
• Copy to: allows you to copy the selected content entry or all contact entries to
the Phone, SIM or FDN list.
• Assign speed dial: allows you to assign a speed dial key number to the
selected Phonebook entry.
• Send name card via: allows you to send your name card via Text message or
Picture message.
• Delete: allows you to delete the selected name and number from your
Phonebook or delete multiple numbers. You are asked to confirm your name and
number deletion by pressing the Yes soft key. To cancel, press the No soft key.
• Select language: allows you to select between English, Français, and Español.
69
Dialing a Number from Phonebook
7. Pressing the View option, from the above listing, displays the entry’s
information.
8. Press the Options soft key after the contact information is displayed, for
these additional options:
• Edit: allows you to edit the name and number fields in the entry. You can also
add an email address and notes.
• Send message: allows you to send a message to the selected number. You
may choose between Text message, Picture message, or Voice note.
• Call: places the call to the selected phone number.
• Copy to phone/SIM card: allows you to copy the selected contacts’
information to the Phone or SIM card.
• Assign speed dial: allows you to assign a speed dial key number to the
selected Phonebook entry.
• Send name card via: allows you to send your name card via Text message or
Picture message.
• Delete: allows you to delete the selected name and number from your
Phonebook. You are then asked to confirm the name and number deletion by
pressing the Yes soft key. Press the No soft key to cancel the deletion.
• Add to block list: allows you to add the currently created contact entry to a list
of blocked numbers. These numbers are rejected by the phone.
Dialing a Number from Phonebook
Once you store phone numbers in the Phonebook, you can dial them easily and
quickly by using the location numbers assigned to them and listed in the Phonebook.
Note: If you cannot remember a location number, you must go into the Contact list menu in the
Phonebook menu to search for the entry by name. For more information, refer to "Finding a
Phonebook Entry" on page 69.
Speed Dialing
Once you store phone numbers from your Phonebook list, you can set up to 8 speed
dial entries and then easily dial them whenever you want, by pressing the associated
numeric key.
䊳
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press
and hold the appropriate key.
Understanding Your Phonebook
70
Setting Up Speed Dial Entries
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Scroll to Speed dial by pressing the Up or Down Navigation key and press
the Select soft key or the
key.
4. Use the Up or Down Navigation key to select the keypad number key to
where you wish to assign the new speed-dialing number and press the
Add soft key or the
key.
• Select from the 2 to 9 keys, and press the Add soft key.
• The 1 key is pre-reserved for quick dialing your voice mail.
5. Highlight a contact entry number from the contact list and press the Select
soft key or the
key.
6. Highlight the Select option and press the
key.
7. You receive a Saved confirmation and the Speed dial menu displays the
number assigned to the number key you selected.
8. To return to the Idle screen, press the
key.
Note: Memory location 1 is reserved for your Voice mail server number and this speed dial location can not
be changed. The voice server number can be altered via the Messages > Voice mail > Voice
server number menu.
Editing a Caller Group
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Highlight the Groups option and press the Select soft key or the
key.
4. Scroll through the group list by pressing the Up or Down Navigation key.
5. Highlight the group you want and press the Options soft key.
6. Highlight the Edit option and press the Select soft key or the
key.
7. To edit the Caller group name, modify the text in the Name text box.
8. To change the image associated with the Caller group, press the Down
navigation key to highlight the Picture ID icon. Press the
71
key.
Block List
The following options are available:
• Take picture: allows you to take a picture with your camera.
• Photos: allows you to choose a photo from Photos folder.
• Downloaded images: allows you to choose a photo from your Downloaded
images folder.
• Icons: allows you to choose from pre-defined icons.
9. To change the ringtone associated with the Caller group, press the Down
key to highlight the Ringtone icon. Press the
key.
The following options are available:
• Default melodies: allows you to choose between 11 different melodies.
• Voice list: allows you to assign a voice clip to this group.
• Sounds: allows you to choose a sound from your Sounds folder.
• Music: allows you to choose a music file from your Music folder.
10. Press the Save soft key when you are finished. Your Caller group
settings save.
11. Press the
key to return to Idle mode.
Block List
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Select the Block list option by pressing the Up or Down Navigation key
and press the Select soft key or the
key.
4. Press the Options soft key, press the Right Navigation key to go from the
Add new option and select a block criteria from one the following
categories:
• Number: blocks a specific number.
• Contacts: blocks selected contact entries.
• Group: block numbers associated with a specific caller Group
• FDN contacts: blocks selected FDN contact entries.
• Recent contacts: blocks selected numbers which are selected from the recent
calls list.
• Unknown numbers: blocks incoming calls from unknown numbers.
5. Press the Save soft key to add the selected number to your block list.
Understanding Your Phonebook
72
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s memory, your SIM card, FDN, or All.
Important!: Once Phonebook entries are deleted, they cannot be recovered.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Highlight Management and press the Select soft key or the
key.
4. Scroll to Delete all by pressing the Up or Down Navigation key and press
the Select soft key or the
5.
key.
Press the OK key to place a check mark by the memory location you want
to empty (All, Phone, SIM card, or SIM card(FDN)) and press the Delete soft
key.
Tip: Press the OK key to remove the check mark.
6. When the Delete? confirmation message displays, press the Yes soft key
or the
key.
7. Press the No soft key to cancel.
8. Press the
key to return to Idle mode.
Management
The Management menu allows you to select where your contacts are saved, copy
your SIM contacts to your phone, delete your contacts, sort by contacts, or check
your memory status.
View Contacts
This option allows you to view all the contacts stored on the Phone or the Phone and
SIM.
73
Management
Default Saving
The Default Saving option allows you to choose where your contacts are saved. The
following options are available:
• Phone: new phonebook contacts are saved to your phone. Your phone comes with
the default set to Phone memory.
• SIM card: new phonebook contacts are saved to your SIM card.
• Ask on saving: you are prompted to choose between Phone or SIM Card
whenever you save a new contact.
Copy all to
The Copy all to option allows you to copy all the contact information to your Phone
or SIM card.
Sort by contacts
The Sort by contacts menu option allows you to set the sort function to alphabetize
the contacts by First name or Last name.
Delete All
Important!: Once contact entries are deleted, they cannot be recovered.
This option allows you to delete all your contacts from the Phonebook. For more
information, refer to "Deleting all of the Phonebook Entries" on page 73.
Memory Status
You can check how many names and numbers are stored in the Phonebook, within
both the SIM card, Phone memory, and the FDN. You can also see the current
storage capacity of both memories.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll to the Phonebook icon using the Navigation keys. Press the Select
soft key or the
key to enter your Phonebook.
3. Highlight Management and press the Select soft key or the
key.
4. Select the Memory status option by pressing the Up or Down Navigation
key and press the Select soft key or the
5. Press the
key.
key or the Back soft key when you are finished.
Understanding Your Phonebook
74
Own Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any way affect the actual subscriber numbers on your SIM card.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Select the Own number option by pressing the Up or Down Navigation key
and press the Select soft key or the
key.
4. Highlight the Number 1 entry to reveal a drop down containing your
current number.
To edit your number information:
1. Press the
key. This makes the phone number field accessible.
2. Highlight the Phone Number field and press the
to backspace and
erase the existing number.
3. Enter the new number information and press the Save soft key.
75
FDN List
FDN List
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The FDN List allows you to set up a list of numbers that your phone may dial.
FDN mode must first be enabled in the Security settings. For more information on
changing this setting, see "FDN mode" on page 110.
To enable FDN mode, a PIN2 number is required. You can obtain your PIN2 from
T-Mobile customer service.
Important!: Your Default saving location must be set to SIM prior to performing this procedure. For more
information, refer to "Default Saving" on page 74.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Phonebook icon. Press the Select
soft key or the
key to enter your Phonebook.
3. Select the FDN list option by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Press the Options soft key, and select Add or press the
key.
5. Enter the PIN2 number obtained from T-Mobile’s customer service center
and create your restricted phone list.
6. Enter phone number into the list to create the new FDN entry.
Understanding Your Phonebook
76
Section 8: Messages
Topics Covered
• Types of Messages
• Text Messages
• Picture Messages
• Voice Notes
• Inbox
• Outbox
• Drafts
• Templates
• Voice Mail
• Delete all
• Settings
• Memory Status
• Broadcast Messages (SIM Card Dependent)
• Instant Messaging (IM)
This section describes how to send or receive different types of messages. It also
explains the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Picture Messages
• Voice Notes
• Voice Mail
• Broadcast Messages (SIM Dependent)
• Instant Messaging
77
Text Messages
Text Messages
Short Message Service (SMS) allows you to send and receive short text messages to
and from other mobile phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include simple graphics, melodies,
and animated images in your messages. To use this feature, you must subscribe to
T-Mobile's message service.
The Message icon (
) displays when you receive a new text message. When the
memory is full, the message icon flashes on your phone and you cannot receive any
new messages. You must delete a message before you can receive additional
messages.
䊳
Use the Delete option in each message box to erase obsolete messages.
Create new
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Create new option and press the Select soft key or the
key.
4. Highlight the Text message option and press the Select soft key or the
key.
5. Create your message.
Note: For further details about entering characters, see "Changing the Text Input Mode" on page 60.
You can enter up to 160 standard Alphabet characters per page in your message. The message can
be up to 12 pages long for a total of 1920 characters.
6. When you finish entering your message, press the Options soft key. The
following options are available:
• Insert from: allows you to insert from the Text templates, Phonebook, or
Bookmarks. The Text messages template allows you to apply one of the preset
message templates to the text. Select one of the 10 items stored in the Text
messages Text templates menu. Phonebook allows you to add names and
phone numbers to your message. Bookmarks allows you to add Internet
addresses to your message.
• Add content: allows you to add a picture, animation, or melody to your
message.
Messages
78
• Attach: allows you to attach a Name card, Schedule, Anniversary item,
Miscellaneous item, or Task to your message.
• Save to Drafts: save the message to your Phone or SIM card.
• Select language: allows you to set the language to English, Français, and
Español.
• Text style: allows you to format the style of the text.
For the Text size, Large, Medium, and Small size are available. Text mode options
are Normal, Underline, and Strikethrough. The options for Bold and Italic are set
by using the
key to place a checkmark next to the style attribute. Alignment
options are Left, Center, and Right.
• Back: allows you save to your draft folder without sending.
7. Press the Send
key.
8. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an address from the last
20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• Phone number: allows you to enter a new phone number.
9. Enter a New number then press the OK soft key. The number you selected
is entered in the To text box.
10. Press the Add soft key for the following options:
• Recent recipients: allows you to select from recipients of your previous
messages.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• Phone number: allows you to enter a new phone number.
• Group: allows you to send the text message to an entire group such as Family,
Work, or Friends.
• FDN list: allows you to enter a contact from your FDN list.
11. When you finish entering the destinations, press the Send
key to send
the message.
Picture Messages
This menu allows you to use the Multimedia Message Service (MMS).
Picture Messaging is a messaging service that provides delivery of personal picture
messages from phone to phone or from phone to email. The Picture Message icon
(
) displays on an on-screen tab when you receive a new picture message.
In addition to the familiar text content available via traditional text messages, picture
messages can contain images, graphics, voice, and audio clips.
79
Picture Messages
Note: A Picture Messaging message is a multimedia presentation contained in a single file. It is not a text
file with attachments.
You must first retrieve a picture message from T-Mobile’s network before you can
displays in your Inbox list to indicate any not yet
view the message. The i
retrieved Picture messages. The Retrieved Multimedia Message icon (
) displays
once you successfully retrieve a new picture message from the network.
Using the Picture Messaging feature, your phone can receive and send messages
that contain multimedia files, such as photos, sounds and images that you
downloaded from the Internet, audio or sounds you recorded, and voice lists. This
function is available only if it is supported by your service provider. Only phones that
offer picture messaging features can receive and display picture messages.
Create new
This menu allows you to create a new picture message and then send it to one or
more destinations.
Creating and Sending a Picture Message
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Messages icon and press the
Select soft key or the
key to enter the menu.
3. Highlight the Create new option and press the Select soft key or the
key.
4. Highlight the Picture message option and press the Select soft key or the
key.
5. Highlight Subject and press the
key.
6. Enter the subject of your message and press the
key.
Note: For more information about entering characters, see "Using ABC Mode" on page 63.
7. Highlight the Image & Video option and press the
key.
8. Highlight one of the following options and press the Select soft key or the
key.
• Take picture: launches the camera for you to take a picture.
• Downloaded images: allows you to select a previously downloaded image to
send in the picture message.
• Photos: allows you to select a picture from your photos folder.
• Record video: launches the camcorder for you to shoot video.
Messages
80
• Downloaded videos: allows you to select a previously downloaded video file to
send in the picture message.
• Videos: allows you to select a video from your videos folder.
• Memory card: allows you to select an image or video from the memory card.
9. Select an image/video and press the Options soft key.
10. Highlight the Add option and press the Select soft key or the
key to
add it to your message.
11. Highlight the Sound option and press the
key.
12. Highlight one of the following options and press the Select soft key or the
key.
• Record audio: allows you to record a new voice message.
• Sounds: allows you to select a sound from your Sounds folder.
• Voice list: takes you to the Voice list (Recorded audio) folder to select a
voice note to add.
• Memory card: allows you to select a sound file from your memory card.
13. Select an audio file and press the Options soft key.
14. Highlight the Add option and press the Select soft key or the
key to
add the sound to your message.
15. Highlight Message and press the
16. Enter your message and press the
key.
key.
17. To change the Subject or Message, select a category and press the
Options soft key. Highlight Edit to edit the item.
18. To change the image or sound with another one, select a category and
press the Options soft key. Depending on the category selected, highlight
Remove media to remove or replace the item.
19. When you finish creating the message, press the Send to soft key.
20. Highlight one of the following send options, press the Send soft key or the
key:
• Recent recipients: allows you to select a number or an address from the last
20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• New recipient: allows you to manually enter a phone number or email address.
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
The number or address selected displays in the To text box.
81
Voice Notes
21. If you selected more than one recipient, press the Options soft key for the
following options:
• Add recipients: allows you to add additional recipients to this message.
• Change recipient: allows you to change the To, Cc, or Bcc additional
numbers.
22. Press the Send
key. Your phone sends the Picture message.
Voice Notes
In this menu, you can record a voice note of up to one minute long and then
immediately send it via Picture Messaging. The Voicemail Message icon (
)
displays when you receive a new voice note message.
Creating and sending a Voice Note
When you access this menu, a timer displays on the screen.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Voice note icon. Press the Select
soft key or the
key to enter the menu.
• This menu can also be accessed by:
- Scrolling to the Messages icon and press the Select soft key or the
enter the menu.
- Highlight the Create new option and press the Select soft key or the
- Highlight the Voice note option and press the Select soft key or the
3. Press the Record soft key to begin recording.
key to
key.
key.
4. Record a memo by speaking into the phone’s microphone.
The display simultaneously shows the elapsed time and the remaining
time.
5. Press the Stop soft key when you are finished recording. Or, when the
recording time is expired, the display advances to the next screen.
Note: Your voice note automatically saves in the Voice list.
6. Press the Options soft key for the following options:
• Send to: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the previous Voice note and enables you to record a new
voice note.
• Set default destination: allows you to remove or edit the default destination.
Messages
82
• Set as: allows you to assign the new voice note file as either a Default Ringtone,
Caller ringtone, or Alarm tone.
• Save: allows you to save the Voice Note in the Voice list.
7. Highlight the Save option and press the Select soft key or the
key.
8. To send the Voice note, press the Send soft key or select the Send to
option in the Options menu.
9. Highlight one of the following send options:
• Recent recipients: allows you to select either a number or an address from the
last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• New recipient: allows you to manually enter a phone number or email address.
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
10. Highlight the selection and press the
key.
11. Follow the instructions depending on which option was selected.
12. If you selected more than one recipient, press the Options soft key for the
following options:
• Add recipients: allows you to add additional recipients to this Voice note.
• Change recipient: allows you to select To, Cc or Bcc additional numbers.
13. Press the Send
soft key to send this voice note.
Your phone sends the message. The message saves to the Outbox after it
successfully sends.
Inbox
The Inbox stores received messages. You can tell what kind of message was
received by the icon displayed. If the icon envelope is open then the message was
read, otherwise a closed envelope displays.
The following types of messages may display in your Inbox list:
Voice note
Text messages
Multimedia messages
Push messages
83
Inbox
When you enter the Inbox, the list of messages displays with the sender’s phone
numbers, or names, if available in your Phonebook. After you read the message, the
open envelope icon displays.
Tip: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Inbox option and press the Select soft key or the
key.
Viewing a Text Message from the Inbox
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Inbox option and press the Select soft key or the
key.
4. Select a text message from the list and press the Options soft key.
The following options display:
• Reply via: allows you to send a reply to the sender by sending a Text message,
Picture message, or Voice note.
• Call back: allows you to call the sender of the text message.
• Forward: allows you to forward the text message to another person.
• Delete: deletes the selected text message or multiple messages.
• Move to phone: allows you to move the message from the SIM card into the
phone’s memory. This option is only available for messages stored in the SIM
card. Depends on where the current message was saved.
• Sort by: allows you to sort messages by Read/Unread, Date, Name, Type, Size,
or Subject.
• Lock/Unlock: allows you to protect the message from deletion or unlock the
message for deletion.
5. Press the View
key (from the main listing) to read the message
contents.
6. To scroll through the text, press the Up or Down Navigation key.
Press the Options soft key while reading a text message to display the
following:
• Reply via: allows you to send a reply to the sender by sending a Text message,
Picture message, or Voice note.
• Call back: allows you to call the sender of the text message.
Messages
84
• Forward: allows you to forward the message to another number.
• Save address: allows you to extract the sender’s number and URL, email
addresses or phone numbers from the message text, so that you can save them
in your phone’s memory.
• Delete: allows you to delete the message.
• Move to phone: allows you to move the message from the SIM card into the
phone’s memory. This option is only available for messages stored in the SIM
card. Depends on where the current message was saved.
• Move to SIM card: allows you to move the message from the Phone’s memory
into the SIM card. This option is only available for messages stored in the
Phone’s memory. Depends on where the current message was saved.
• Lock/Unlock: allows you to protect the message from deletion or unlock the
message for deletion.
Viewing a Picture Message from the Inbox
1. Highlight a retrieved picture message
from the list and press the
Options soft key. The following options display:
• Reply via: allows you to send a reply to the sender by sending a Picture
message, Text message, or Voice note.
• Reply all via: allows you to send a reply to the sender by sending a Picture
message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Delete: deletes either a selected or multiple picture messages.
• Sort by: allows you to sort messages by Read/Unread, Date, Name, Type, Size,
or Subject.
• Lock/Unlock: allows you to protect the message from deletion or unlock the
message for deletion.
• Properties: shows you information about the message, such as time and date
the message was received, the sender’s email address or phone number,
recipient’s email address or phone number, Cc, message size, priority, and class.
2. Press the View
soft key (from the main listing) to begin the retrieval
process and view the message contents.
3. Press the Options soft key while viewing the Picture message. The
following options display:
• Reply via: allows you to send a reply to the sender by sending a Picture
message, Text message, or Voice note.
• Reply all via: allows you to send a reply to the sender by sending a Picture
message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
85
Inbox
• Replay: allows you to redisplay the picture.
• Save address: allows you to save the phone number or email address of the
person who sent this Picture message.
• Save media: allows you to save the media to the appropriate folder.
• Delete: deletes the selected picture message.
• Lock/Unlock: allows you to protect the message from deletion or unlock the
message for deletion.
• Properties: shows you information about the message, such as time and date
the message was received, the sender’s email address or phone number,
recipient’s email address or phone number, Cc, message size, priority, and class.
4. To scroll through the contents, press the Up or Down Navigation keys.
5. Press the Back soft key or the
when you are finished viewing the
message.
Listening to a Voice Note from the Inbox
1. Select a Voice Note
from the list and press the Options soft key.
The following options display:
• Reply via: allows you to send a reply to the sender by sending a Voice note,
Text message, or Picture message.
• Reply all via: allows you to send a reply to the sender by sending a Voice note
or Picture message.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Delete: allows you delete either a selected or multiple saved voice notes.
• Sort by: allows you to sort messages by Read/Unread, Date, Name, Type,
Size, or Subject.
• Lock/Unlock: allows you to protect the message from deletion or unlock the
message for deletion.
• Properties: shows you information about the message, such as time and date
the message was received, the sender’s email address or phone number,
recipient’s email address or phone number, Cc, message size, priority, and class.
2. Press the Play
key (from the main listing) to listen to the message
contents.
Press the Options soft key while listening to the message and choose from
the following:
• Reply via: allows you to send a reply to the sender by sending a Voice note, Text
message, or Picture message.
• Reply all via: allows you to send a reply to the sender by sending a Voice note
or Picture message.
• Call back: allows you to call the sender back.
Messages
86
•
•
•
•
Forward: allows you to forward the message to another number.
Replay: allows you to replay the voice note.
Delete: allows you to delete the selected message.
Save address: allows you to cut and paste the address to send a text message,
or picture message.
• Save media: allows you to save message media to your Voice list.
• Lock/Unlock: allows you to protect the message deletion.
• Properties: shows you information about the message, such as time and date
the message was received, the sender’s email address or phone number,
recipient’s email address or phone number, Cc, message size, priority, and class.
Viewing a Picture Message After You Receive It
When a new picture message comes in, the display shows the Picture Messaging
) on an on-screen tab.
Message icon (
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message later in the Inbox.
2. Press the Options soft key to access the various options described above.
3. Press the
key when you are finished.
Outbox
This message box stores messages that you sent.
When you enter this menu, the list of messages in the Outbox displays with the
recipients’ phone numbers or names, if available in your Phonebook.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Outbox option and press the Select soft key or the
key.
Note: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.
4. Select a message from the list and press the View
key to view the
message contents.
Tip: Press the Options soft key while reading a message to select alternate options.
87
Drafts
Drafts
This message box stores messages that you may want to edit or send at a later time.
When you enter this menu, the list of messages in the box displays.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Drafts option and press the Select soft key or the
key.
Note: Press the Up or Down Navigation keys to scroll between Inbox, Outbox, and Drafts.
4. Select a message from the list and press the Options soft key.
5. Highlight the Edit option and press the Select soft key or the
key to
edit the message contents.
6. Press the Send
soft key (while viewing the message) to send the
message.
Tip: Press the Options soft key while reading a message to select alternate options.
Templates
Besides entering message text using the keypad keys, you can speed up message
composition by including copies of stored text or picture (Templates) in your
message.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Templates option and press the Select soft key or the
key.
4. Highlight either the Text templates or Picture message templates option
and press the Select soft key or the
key.
• Text templates: consist of a pre-created list of frequently used sentences.
• Picture message template: consists of previously created audio/video segments.
5. Highlight a template entry and press the Options soft key. You can choose
from ten predefined sentences that you can add to your text message to
save time.
Messages
88
6. Highlight the Send option, press either Text message or Picture
message, and press the Select soft key or the
7. Press the Send
key.
soft key to send the message.
Voice Mail
This menu provides you with a way of accessing your voice mailbox, if provided by
your network.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Voice mail option and press the Select soft key or the
key.
Note: Before you can use the Voice Mail feature, you must obtain the voice server number from T-Mobile
customer service.
The following options display:
• Call voice mail: pressing the Select soft key or the
messages.
Tip: In Idle mode you can also press and hold the
key to listen to your
key to connect to the voice server.
• Voice server number: allows you to change the voice mail server number, if
necessary.
Note: Voice mail is a network feature. Please contact T-Mobile customer service for further details.
Delete all
This menu allows you to delete all of the messages in each message box. Or, you
can also delete all of your messages in all message boxes at one time.
Important!: Once messages are deleted, they cannot be recovered.
1. Press the Up or Down Navigation key to select a message box to clear. To
delete all of your messages, select the All option.
2. Press the
key to place or remove a check mark.
3. Press the Delete soft key to delete the marked objects.
4. After you receive the Delete? confirmation, press the Yes soft key to delete
or press the No soft key to cancel.
89
Settings
Settings
In this menu, you can set up a default text message or a picture message. The last
setting you accessed is automatically activated for sending subsequent messages.
Text message
• Service center: allows you to store or change the number of your message center,
which is required when sending messages. You must obtain this number from
T-Mobile customer service.
• Destination address: allows you to enter a number that you would like to send all
messages to. You can still message others, but this number always displays in the
Recipient list.
• Validity period: allows you to set the length of time your text messages are stored
at the message center while attempts are made to deliver them.
• Reply path: allows the recipient of your message to send you a reply message
using your message center, if your network supports this service.
• Delivery report: allows you to activate or deactivate the report function. When this
function is activated, the network informs you whether or not your message was
delivered.
Picture message
Use the following options to set Send and Receive settings for Picture messages.
Send Settings
• Delivery report: when this option is enabled, the network informs you whether or
not your message was delivered.
• Read reply: when this option is enabled, your phone sends a request for a reply
along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry: set the length of time your messages are stored in the message center
while the network attempts to deliver them.
• Delivery after: you can set a delay time before the phone sends your messages.
Receive Settings
• Anonymous reject: you can set your phone to automatically reject anonymous
messages.
• Ads allowed: you can set your phone to automatically receive advertising
messages.
• Report allowed: you can set the option to receive a delivery report.
Messages
90
Memory Status
You can view the amount of the allocated memory and the memory available for
picture messages.
The display shows the total space including the used and free space. You can also
view how much space and the number of messages currently occupying each
message box type:
• Text Message (saved on the phone) ( )
• Text Message (saved on the SIM card) ( )
- Inbox
- Outbox
- Draft
• Picture message
- Inbox
- Outbox
- Draft
- Template
• Push messages
Broadcast Messages (SIM Card Dependent)
This network service allows you to receive text messages on various topics, such as
the weather or traffic.
䊳
Please contact T-Mobile's customer service center for further details.
Instant Messaging (IM)
Instant Messaging is a way of sending short, simple messages that are delivered
real time to users online.
Before using this feature, you need to subscribe to a messenger service. Your
handset has 4 pre-loaded Messaging services (AIM, ICQ, Windows Live, and Yahoo!).
Note: Contact T-Mobile customer service for further details.
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the IM icon. Press the Select soft key
or the
91
key to enter the menu.
Instant Messaging (IM)
3. Highlight the messenger service to which you have previously subscribed
to by using the Up or Down Navigation key and press the Select soft key
or the
key.
4. Highlight the Sign on, Connect, or Sign in option, depending on your
messenger service and press the Select soft key or the
key.
5. Enter the required sign on information such as ID and password, then
press the Down Navigation key.
Note: The information required for sign on varies depending on the Instant Messaging provider you use.
6. Fill in all the appropriate fields and press the Sign in soft key or the
key.
7. Agree to the terms and conditions of use for this service and press the
I agree soft key or the
key.
8. Follow the on-screen instructions to read, reply to, compose, send, and
manage your Instant Messaging account.
Using the Instant Messenger Options
After selecting an Instant Messaging service, the following options display:
• Sign on/Connect/Sign in: allows you to login to your Instant Messaging account.
• Saved conversations: displays permanent records of your Instant Messaging
conversations.
• Offline conversations: displays a listing of any conversations made while you
were offline (this options applies only to AIM and ICQ messenger).
• Preferences: allows you to change your Preferences.
• Help: provides helpful information about IM providers such as: Sign up, Sign on,
Buddies, Sending IMs, Receiving IMs, Privacy, and Away.
Messages
92
Section 9: Changing Your Settings
Topics Covered
• Wi-Fi Settings
• Time & Date
• Phone Settings
• Display Settings
• Bluetooth
• Sound Settings
• Synchronization
• Synchronizing your Phonebook
• Network Services
• Security
• Software Update
• Memory Status
• Reset Settings
This section explains the sound and phone settings for your phone. It includes such
settings as: display, security, memory, and any extra settings associated with your
phone.
Wi-Fi Settings
Once set up for Wi-Fi connectivity, your phone automatically uses Wi-Fi, when
available, for all your mobile phone services. For more information, refer to "Wi-Fi"
on page 23.
Time & Date
This menu allows you to change the current time and date displayed.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft
key or the
93
key to enter the menu.
Time & Date
3. Highlight the Time & date option and press the Select soft key or the
key.
The following options are available:
• Time zone updating: allows you to set the parameter for updating the on board
time to either: Automatic (via carrier sync up), Manual only (user-defined),
Prompt first (User is prompted for time change, if available).
• Home zone: allows you to set your primary time zone.
• Time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time displays in either a
12 hours or 24 hours format.
• Date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD
format.
• Week start day: allows you to select the day of the week you wish to set as a start
day. Choose from Sunday or Monday.
To change your time and date settings:
1. Use the Up or Down Navigation key to select the option you wish to
change.
2. Use the Left or Right key to position the cursor over the number you wish
to change.
3. Enter the desired number.
4. To change other options, use the Navigation keys to select the desired
setting.
5. Press the Save soft key when you are finished changing your settings;
otherwise press the Cancel soft key.
Note: Automatic updates of time and date do not change the time set for alarm settings or
calendar memos.
Changing Your Settings
94
Phone Settings
You can customize various phone settings.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft
key or the
key to enter the menu.
3. Highlight the Phone settings option and press the Select soft key or the
key. The following options display:
Language
This menu allows you to select a display language for Text language and Input mode.
Choose from Automatic, English, Français, and Español.
Greeting message
This menu allows you to set a text greeting to be displayed briefly when the phone is
switched on.
For details about entering characters, see "Entering Text" on page 60.
Slide settings
You can configure what action the phone will take when a particular sliding action is
taken. The top portion of the phone can either slide open or closed.
1. Highlight the Up option and then use the Left or Right Navigation key to
select the action the phone will take when the cover slides up: Accept call
or None.
• When the Accept call option is selected, you can simply slide open the phone to
answer an incoming call. When None is selected, you must press a key to
answer the incoming call, depending on the answer setting.
2. Highlight the Down option and then use the Left or Right Navigation key to
select the action the phone will take when the cover slides down: Stop
operation or Continue operation.
3. Press the Save soft key when you are finished changing your settings;
otherwise press the Cancel soft key.
95
Phone Settings
USB settings
This menu selects the method of communication for the USB port, the options
include:
• Modem: allows you to use the phone as a wireless modem for communication
between a computer and the Internet.
• Mass storage: allows you to utilize the onboard storage capacity of the phone
to store and upload files. This option allows your computer to detect the phone
as a removable storage drive.
Note: You must select Modem to connect to PC Studio.
Extra settings
You can turn the automatic redialing or answering features on or off.
1. To turn a feature on, highlight the feature and press the
key.
A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and press the
key.
The check mark no longer displays.
The following options are available:
• Auto redial: when this option is checked, the phone makes up to ten attempts to
redial a phone number after an unsuccessful call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can answer an incoming call by
pressing any key, except the
key or the Reject soft key. To reject the call,
press the
key or the Reject soft key. When this option is unchecked, you
must press the
key or the Accept soft key to answer a call.
3. When you finish changing your settings, press the Save soft key to save
your settings. Otherwise press the Cancel soft key.
Changing Your Settings
96
Airplane mode
Airplane Mode allows you to use many of your phone’s features, such as Games,
Voice Notes, etc., when you are in an airplane or in any other area where making or
receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot
send or receive any calls or access online information.
1. To turn a feature on, highlight the Airplane mode option and press the
Select soft key or the
key.
2. Highlight On or Off and press the Save soft key.
Display Settings
In this menu, you can change various settings for the display or backlight.
Wallpaper
This menu allows you to change the background image to be displayed in Idle mode.
1. Highlight the Wallpaper option and press the
key to open the
following options:
• Browse wallpapers: allows you to download additional wallpapers from tzones.
• Default wallpapers: allows you to choose from a list of wallpapers included
with your phone.
• Downloaded images: allows you to choose a photo from your downloaded
images folder.
• Photos: allows you to choose a photo from Photos folder.
To change the background image:
1. Press the Navigation keys to scroll through the list and select a wallpaper.
2. Place a checkmark on the Menu background option by pressing the
key.
3. Highlight the Transparency option and press the Left or Right Navigation
key to determine the amount of transparency for the background.
4. Make a selection and press the Save soft key or the
97
key.
Display Settings
Info display
You can select the text style and text color of the informational text displayed on the
Main LCD.
1. Highlight an option and press the Left or Right Navigation keys to change
the settings.
2. Press the Save soft key to apply your changes, or the Cancel soft key
to cancel.
Skin
You can select the background color of the menus displayed on the Main LCD. There
are two different patterns (Black or White) from which to choose.
1. Press the Up or Down Navigation keys to change the settings.
2. Press the Save soft key to apply your changes, or the Cancel soft key to
cancel.
Brightness
You can adjust the display brightness of the Main LCD to make it easier to see under
different lighting conditions.
1. Press the Left or Right Navigation keys to change your settings.
2. Press the Save soft key to save your changes, or the Cancel soft key
to cancel.
Backlight
In this menu, you can select the length of time that the keypad backlight is on and
how much longer the display is illuminated before going off.
The On setting is how long the keypad backlight is on. You can select 15 sec,
30 sec, 1 min, 3 min, or 10 min.
The Dim option is how much longer after the keypad backlight goes off that the
display remains lit. You can select Off, 15 sec, 30 sec, 1 min, or 3 min.
For example, if you set On for 30 sec and Dim for 15 sec, after 30 seconds the
backlight on the keys would turn off and 15 seconds later the display light would
turn off.
1. Press the Left or Right Navigation keys to change each field’s settings.
2. Press the Save soft key to save your changes, or the Cancel soft key
to cancel.
Changing Your Settings
98
Dialing display
This menu allows you to select the size and color of your dialing font and the
background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft key or the
key.
2. Use the Left or Right key to select between: Large, Medium, or Small.
3. Press the Save soft key or the
key to save your change. Otherwise,
press the Cancel soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft key or the
key.
2. Use the Left or Right key to select either Basic (black), Rainbow,
Monochrome or Gradation. If you select Monochrome or Gradation, you
can select another option by using the Down Navigation key and then
scrolling through the available choices.
3. Choose from up to 15 different options.
4. Press the Save soft key or the
press the Cancel soft key or the
key to save your change. Otherwise,
key.
To change the background color:
1. Highlight the Background color option and press the Select soft key or
the
key.
2. Use the Left or Right key to select between 20 different colors or None.
3. Press the Save soft key or the
key to save your change. Otherwise,
press the Cancel soft key.
Calendar
This option allows you to On (enable) or Off (disable) the calendar display for your
background wallpaper.
Show caller information
The Show Caller Information option, when turned On, displays information such as
the caller name on your screen when your missed calls are listed. Caller must
already be on your Contact list for additional information to display. Select the Off
option to display only the phone number on the screen.
99
Bluetooth
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off.
䊳
Make a selection and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth devices.
䊳
Highlight the Search new device option and press the Select soft key or
the
key. The phone then searches for available devices.
Bluetooth services
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
integrate.
The following Service profiles are available:
- Headset: The remote Bluetooth headset enables both incoming and outgoing calls.
- Handsfree: The remote Bluetooth car kit enables both incoming and outgoing calls.
Help
Accesses the t-zones site for general help information.
Sound Settings
You can customize various sound settings.
Incoming call
Note: When downloading Mega Tones® or HiFi RingersTM, charges may apply.
Changing Your Settings 100
Browse MegaTones
Using the Browse MegaTones option on the sounds list, you can quickly access the
T-Mobile website and download new sounds by using the t-zone browser.
䊳
Press the Connect soft key to purchase additional sound files.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access the
T-Mobile website and use the t-zone browser to download new HiFi Ringers.
䊳
Press the Connect soft key to purchase additional ringtones.
Ring tone
This menu allows you to select a ring melody.
1. Highlight Ring tone and press the
key.
2. Use the Up or Down key to highlight a ring tone or press the Left or Right
key to select a file from either the Default melodies, Voice list,
Downloaded sounds, or Music folders.
3. Press the Select soft key or the
key.
Volume
This menu allows you to adjust the ring volume to one of 7 levels.
䊳
Use the Right or Left key to increase or decrease the volume.
Alert type
This menu allows you to specify how you are to be informed of incoming calls.
䊳
Use the Right or Left key to select a Alert type.
The following options are available:
• Melody: the phone rings using the ring melody selected in the Ring tone
menu.
• Vibration: the phone vibrates but does not ring.
• Melody and vibration: the phone rings using the ring melody, and also
vibrates.
• Vibration then melody: the phone vibrates 3 times and then starts ringing.
• Melody then vibration: the phone rings using the ring melody, then vibrates.
Keypad tone
This menu allows you to select the key tone and volume that the phone sounds when
you press a key.
1. Highlight the On/Off field and use the Right or Left Navigation keys to
make your selection.
101
Sound Settings
2. Select On or Off to turn the sound on or off.
3. Highlight the Key Tone field and press the
key to display the Keypad
tone options.
4. Highlight one of the following and press the Select soft key.
• Xylophone
• Beep
• Voice
5. Scroll to Volume using the Up or Down Navigation keys.
6. Press the Left or Right Navigation keys to adjust the volume (levels 1-7).
7. Press the Save soft key or the
press the Cancel soft key or the
key to save your change. Otherwise,
key to return to Idle mode.
Message tone
This menu allows you to set up the ringer for incoming messages. You can set the
Tone, Alert type, and Repetition.
1. Highlight the Tone field and use the
key to display the options. Select
Tone1, Tone2, Tone3, or Tone4, and press the Select soft key.
2. Highlight the Alert type field and use the Left or Right Navigation keys to
highlight one of the following, and press the Select soft key.
• Melody: the phone rings using the ring melody selected in the Ring tone
menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then starts ringing.
• Off: turns off all message alert types.
3. Scroll to Repetition using the Up or Down Navigation keys.
4. Press the Left or Right Navigation keys to select how many times the tone
is repeated: Once, Every 1 min, or Every 2 min.
5. Press the Save soft key or the
key to save your change.
Otherwise, press the Cancel soft key or the
key to return to Idle mode.
Power-on/off tone
This menu allows you to select the melody that the phone sounds when it is
switched on and off.
䊳
To turn off the sound, select Off.
Changing Your Settings 102
Slide tone
This menu allows you to choose from four tones, or Off when opening the slide of
your phone.
Silent mode
This menu allows you to select whether or not your phone vibrates while in silent
mode. You may choose between Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. Press the
key to turn a selected tone On. A check mark displays in
front of the option. Press the Save soft key to save the setting.
2. Press the
key twice to turn a selected tone Off. The check mark no
longer displays in front of the option.
The following options are available:
- Indicative tone: generates a tone whenever a pop-up window displays on the
screen.
- Minute minder: sets whether or not the phone beeps every minute during an
outgoing call to keep you informed of the length of your call.
- Connection tone: sets whether or not the phone beeps when your call is
connected to the system.
- Alerts on call: sets whether or not you receive tones when a message arrives
while you are on a call.
3. Press the Save soft key to save the setting, otherwise press the Cancel
soft key.
Synchronization
The first time you access the synchronization feature the handset prompts with the
following message:
“Would you like to store a copy of your contacts on My.T-Mobile.com so you
can view and manage your contacts online?”
1. Press the
key to agree to the copying of the contact information.
Once the process is complete a new message appears:
“Synchronization complete! Phone will automatically sync on every
phonebook edit you make. To change sync settings go to, Settings >
Synchronization. To manage your contacts, go to: “t-mobile.com”.
103
Synchronization
This feature allows you to back up (synchronize) Contact information, Calendar, and
Tasks stored on your phone with your T-Mobile account on the network. Each time
you edit contact information your phone automatically synchronizes with the web
Address Book.
2. Press the OK soft key to complete the process and return to the idle
screen.
Important!: Synchronization is a service offered to T-Mobile customers.
Sync Now
Once you establish the information you want to synchronize (using the Data to Sync
option), this feature allows you to synchronize with the T-Mobile network.
1. In Idle mode, press the Menu soft key.
2. Scroll to Settings and press the Select soft key or the
key.
3. Select Synchronization by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight Sync Now and press the Select soft key or the
key.
The information synchronizes with the T-Mobile network and a
confirmation dialog displays when finished.
5. Press the
key to return to Idle mode.
Data to Sync
This feature allows you to synchronize your Contacts, Calendar events, and Task lists
with your T-Mobile account on the network.
1. In Idle mode, press the Menu soft key.
2. Scroll to Settings and press the Select soft key or the
key.
3. Select Synchronization by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight Data to Sync and press the Select soft key or the
key.
5. Highlight the type of data to synchronize (Contacts, Calendar or Task) and
press the OK soft key to display a check mark next to the item to
synchronize.
6. Press the Save soft key.
7. Select the Sync Now option and press the Select soft key or the
key.
Changing Your Settings 104
8. When the “Synchronizing with my.t-Mobile.com” message displays,
press the Continue soft key.
9. Press the key to return to the Idle mode.
Viewing the synchronization log
This feature creates a log of the synchronization activity for viewing.
1. In Idle mode, press the Menu soft key.
2. Scroll to Settings and press the Select soft key or the
key.
3. Select Synchronization by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight View Log and press the Select soft key or the
key.
5. The View Log screen displays the Start time, Status, Phone to server
and Server to phone information.
6. Press the Back soft key when you are finished viewing the log.
7. Press the
key to return to Idle mode.
About Sync
This feature displays information about how the synchronization feature works and
provides a URL for more specific synchronization information.
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.
Synchronizing your Phonebook
This feature allows you to back up (synchronize) your Phonebook information stored
on your handset with your T-Mobile account on the network.
Phonebook is wirelessly synchronized on your device using Microsoft Exchange
Server and ActiveSync.
Note: For more information, refer to "Synchronization" on page 103.
To synchronize your Phonebook with the T-Mobile network:
1. In Idle mode, press the Menu soft key.
2. Scroll to Fun & Apps and press the Select soft key or the
3. Select Organizer and press the Select soft key or the
key.
key.
4. Highlight Synchronization by pressing the Up or Down Navigation key
and press the Select soft key or the
105
key.
Network Services
5. Highlight Data to Sync and press the Select soft key or the
6. Highlight Phonebook and press the
key.
key to place a check mark next to
the Phonebook selection.
7. Press the Save soft key to store this preference and return to the previous
screen.
8. Select the Sync Now option and press the Select soft key or the
key.
The data synchronizes with the T-Mobile network and a confirmation
dialog displays when finished.
9. Press the
key to return to the Idle mode, or the Back soft key to
return to the Synchronization menu when the Sync Completed message
displays.
Network Services
Call forwarding
This network service enables incoming calls to be re-routed to a secondary,
pre-specified number.
Example: Forwarding business calls to a colleague while on holiday.
To set your call forwarding options:
1. Select the Call forwarding option and then press the Select soft key or the
key.
2. Select a call forwarding option by pressing the Up or Down Navigation key
and then press the Select soft key or the
key.
The following options are available:
• Forward always: all calls are forwarded until this feature is cancelled.
• Busy: calls are forwarded when you are already on another call.
• No reply: calls are forwarded when you do not answer the phone. Select the
length of time the network waits for before forwarding a call.
• Unreachable: calls are forwarded when you are not in an area covered by
T-Mobile or when your phone is switched off.
• Cancel all: all call forwarding options are canceled.
3. Select the type of forwarded calls, Voice calls or Data calls, by pressing
the Up or Down Navigation key to select the appropriate field, and then
press the Select soft key or the
key.
The current status displays. If the option was already set, the number to
which the calls are forwarded displays.
Changing Your Settings 106
4. To activate call forwarding for the call type, select Activate by using the
Left or Right key. The Forward to field then becomes available to input
the number.
Select Deactivate by using the Left or Right key to deactivate call
forwarding.
5. Enter the number to which the calls are to be forwarded in the Forward to
text box and press the Select soft key or the
key.
To enter an international code, press and hold the
key until the
+ sign displays.
The phone sends your settings to the network and the network’s
acknowledgement displays.
Call barring (SIM Card Dependent)
Call barring allows you to restrict specific types of incoming and outgoing calls on
your phone. This is useful if you allow someone to use your phone for a short period
of time.
Call waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls. To set
your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to which the call waiting
option is to be applied by pressing the Up or Down Navigation key.
The screen informs you whether call waiting is activated or deactivated.
2. Press the Select soft key or the
key to access the call’s status menu.
3. Highlight Deactivate or Activate and press the Select soft key or the
key.
Call waiting activates or deactivates for the selected call type.
4. Select the Cancel all option to deactivate Call waiting on all voice and data
calls.
107
Network Services
Network selection
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To change the Network Selection mode:
1. Highlight the Search now option and press the Select soft key or the
key.
2. Press the Up or Down Navigation key until the network you want highlights
and then press the Select soft key or the
key.
The phone scans for that network and, if available, you are connected.
To change your Default setup:
1. Highlight the Default setup option and press the Select soft key or the
key.
2. Highlight either the Automatic or Manual option and press the Select soft
key or the
key.
• If you select Automatic, you connect to the first available network when
roaming.
• If you select Manual, the phone begins searching for available networks. Press
the Up or Down Navigation key until the network you want is highlighted and
then press the Select soft key or the
key. The phone then scans the
selected network to see if you can be connected, and if a connection is possible,
you are connected.
Caller ID
You can prevent your phone number displaying on the phone of the person you
called.
Note: Some networks do not allow you to change this setting.
The following options are available:
- Default: the default setting provided by the network is used.
- Hide number: your number does not display on the other person’s phone.
- Send number: your number is sent each time you make a call.
Changing Your Settings 108
Security
The Security feature enables you to restrict the use of your phone by others and to
restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
- Disable: the phone connects directly to the network when you switch it on.
- Enable: you must enter the PIN each time the phone is switched on.
Change PIN
This feature allows you to change your current PIN, provided that the PIN check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you enter a new PIN, you are asked to confirm the PIN number by
re-entering it.
Phone lock
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on.
Once the correct password is entered, you can use the phone until you switch it off.
The following options are available:
- Disable: you are not asked to enter the phone password when you switch on the
phone.
- Enable: you are required to enter the phone password when you switch on the
phone.
Change password
The Change password feature allows you to change your current phone password to
a new one. You must enter the current password before you can specify a new one.
Once you enter a new password, you are asked to confirm the change by entering
the password again.
109
Security
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your
password, contact your Service Provider for assistance.
Lock application
With this feature you can lock your applications which provide access to information
such as call records, phonebook, messages, images, and sounds. Once you lock the
contents, you must enter the phone’s password to access the associated menus.
1. Press the Up or Down Navigation key to select an item to lock
2. Press the
key to place a check mark on the selected item.
• To lock all of the contents, select All.
3. Highlight the previously selected item and press the
key to remove a
check mark.
4. Press the Save soft key to lock the marked items.
5. Enter a password and press the OK soft key or the
key.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
- Disable: you can call any number.
- Enable: you can only call phone numbers stored in Phonebook. You must enter your
PIN2. You can obtain your PIN2 from T-Mobile’s customer service.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must first enter the current PIN2 (obtained from T-Mobile) before you can specify a
new one. Once you enter a new PIN2, you are asked to re-enter the new PIN2 to as
confirmation.
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2
feature.
Changing Your Settings 110
Software Update
The Software Update feature enables you to use your phone to connect to the
network and upload any new phone software directly to your phone.
1. In Idle mode, press the Menu soft key.
2. Scroll to Settings and press the Select soft key or the
key.
3. Select Software update by pressing the Up or Down Navigation key and
press the Select soft key or the
follow the on screen instructions.
key to begin the update process and
Memory Status
You can check the amount of the memory being used and the memory remaining for
Shared memory, Messages, Files, Calendar, Phonebook, and Notes.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
You can also check how many names and numbers are stored in Phonebook, in both
SIM card and the phone memory. You can also see the capacity of both memories.
Reset Settings
From this menu you can reset your phone and sound settings to the default settings.
The following options are available:
- All: Phone, Display, Sound and WLAN settings are returned to default values.
- Phone settings: only phone settings are returned to default values.
- Display settings: only display settings are returned to default values.
- Sound settings: only sound settings are returned to default values.
- WLAN settings: only WLAN settings are returned to default values.
- Bluetooth settings: only Bluetooth settings are returned to default values.
To reset your settings:
1. Highlight one of the options and press the
key to place a check mark
next to the option.
2. Press the Reset soft key.
3. You are prompted with Reset settings?. Press the Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft key or the
You receive a reset confirmation message.
111
key.
Files
Section 10: Fun & Apps
Topics Covered
• Files
• Games
• Music Player
• Camera
• Voice Commands
• Organizer
• Synchronization
This section outlines the various applications that are available on your phone.
Files
Files allows you to manage your sounds and images and view your memory status in
one convenient location.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
Sounds
In this menu, you can view the list of sounds downloaded from the web server or
received in picture messages. You can also set a downloaded sound as the current
ring tone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
4. Highlight the Sounds option and press the Select soft key or the
key.
key.
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.
Fun & Apps 112
The following options are available:
Browse MegaTones
Using the Browse MegaTones option on the sounds list, you can quickly access the
T-Mobile website and download new sounds by using the t-zone browser. Press the
Select soft key to purchase additional MegaTones.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access
T-Mobile website and use the t-zone browser to download new HiFi Ringers.
Press the Select soft key to purchase additional ringtones.
Sounds
Highlight an item in the Sounds menu and press the Options soft key. The following
options are available:
• Download new: opens your web browser where you can download new sounds.
• Send via: allows you to send the sound file via a Picture message.
• Set as: allows you to set the sound as a default Ringtone, Caller ringtone, or an
Alarm tone.
• Delete: allows you to delete the selected sound or multiple sounds.
• Move to memory card: allows you to move the original file to an installed memory
card.
• Copy to memory card: allows you to move a copy of the selected file to an
installed memory card.
• Rename: allows you to change the name of the sound.
• Lock/Unlock: allows you to lock the sound to protect it from deletion, or unlock an
already locked sound.
• Properties: displays the sound name, date, format, length, size, and Lock/Unlock
status.
Voice list
The Voice list contains your recorded audio messages.
1. Press the
key to play the selected audio message.
- or Highlight an item and press the Options soft key. The following options are
available:
• Send via: allows you to send the audio message via a Picture message.
• Set as: allows you to set this audio message as a Default Ringtone, Caller
ringtone, or an Alarm tone.
113
Files
• Delete: allows you to delete the selected audio message or multiple audio
messages.
• Move to memory card: allows you to move the original file to an installed
memory card.
• Copy to memory card: allows you to move a copy of the selected file to an
installed memory card.
• Rename: allows you to change the name of the audio message.
• Lock/Unlock: allows you to lock the audio message to protect it from deletion,
or unlock an already locked audio message.
• Properties: displays the audio message name, date, format, length, size, and
Lock/Unlock status.
Images
In this menu, you can view the list of images downloaded from the web server, taken
with the built-in camera, or received in messages. You can set an image as the
current background image.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
4. Highlight the Images option and press the Select soft key or the
key.
The following options are available:
Browse Wallpapers
Using the Browse Wallpapers option, allows you to access the T-Mobile website
and download new images using the t-zone browser.
䊳
Highlight the Browse Wallpapers option and press the
key.
Note: When downloading Wallpapers, charges may apply.
Photos
In this menu you can review the photos you’ve taken.
䊳
Highlight a photo and press the Options soft key to choose from the
following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send your photos to My Album.
• Send via: allows you to send your photos as an attachment to a Picture
message.
• Set as: allows you to set the photo as your Wallpaper or as a Caller ID.
Fun & Apps 114
• Delete: allows you to delete the selected photo or multiple photos.
• Default destination: allows you to Remove or Change where your photos are
sent after you take them.
• Move to memory card: allows you to move the original file to an installed
memory card.
• Copy to memory card: allows you to move a copy of the selected file to an
installed memory card.
• Edit image: allows you to the a selected photograph by using some presets
features such as: Effects, Frames, Emoticons, and Clip Art.
• Rename: allows you to rename the photo.
• Display mode: allows you to view the photos in Line view or Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show presentation.
• Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock
an already locked photo.
• Properties: displays the image name, date, format, resolution, size, and
Lock/Unlock status.
My Album
My Album is a private online picture album that you can use to store and share
pictures, videos, voice messages, and text. For more information, see "My Album"
on page 158.
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply.
1. In your t-zone browser, select the My Albums Menu link and press the
Select soft key or the
key.
2. Photos sent to this folder are stored in the Inbox Album.
3. Use the Up or Down key to highlight a particular image and press the
key to view the photos.
4. Press the
key to exit t-zones and return to the Idle screen.
My Journal
Use a web browser to make notes in My Journal, your online diary and Weblog.
Keep it private to store your personal memories and send email invitations to ask
people to view and comment on your album. See your service provider for more
information. For more information, refer to "My Journal" on page 158.
Note: When making notes on My Journal, charges may apply.
115
Files
Downloaded images
This menu allows you to access your downloaded images.
䊳
Scroll to the image you want to view and press the Options soft key to
access the following options:
• Download new: opens your web browser where you can download new
images.
• View: displays the image.
• Send via: allows you to send an image via a Picture message.
• Set as: allows you to set the image as Wallpaper or as a Caller ID.
• Delete: allows you to delete the selected image or multiple images.
• Move to memory card: moves the selected image or multiple images to the
memory card.
• Copy to memory card: copies the selected image or multiple images to the
memory card.
• Rename: allows you to change the name of the image.
• Display mode: allows you to set the display mode to Line view or Thumbnail
view.
• Slide show: allows you to set the time for the slide show to cycle through the
images. Choose 1 second or 3 seconds.
• Lock/Unlock: allows you to lock the image to protect it from deletion, or unlock
an already locked image.
• Properties: displays the image name, date, format, resolution, size, quality,
and Lock/Unlock status.
Videos
In this menu, you can view a list of videos downloaded from the web server, received
in multimedia messages, or recorded via the phone. The following options are
available:
Downloaded videos
This menu allows you to access your downloaded video clips.
Scroll to the video you want to view. By pressing the Options soft key you can
access the following options:
• Play: plays the video.
• Send to My Album: allows you to send the selected video to My Album.
• Send via: allows you to send the video via Picture message or Bluetooth.
• Delete: allows you to delete the Selected video clip or to delete Multiple video
clips.
• Default destination: allows you to remove or change the default destination.
Fun & Apps 116
• Move to memory card: allows you to move the video to the microSD memory
card.
• Copy to memory card: allows you to copy the video to the microSD memory card.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a Line view or in
Thumbnail view.
• Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an
already locked video.
• Properties: displays the video Name, Date, Format, Size, Resolution, Length,
Quality and Lock/Unlock status.
Videos
In this menu you can review the videos you’ve taken. Highlight a video and press the
Options soft key to choose from the following options:
• Play: plays the video.
• Send to My Album: allows you to send the selected video to My Album.
• Send via: allows you to send the video via Picture message.
• Delete: allows you to delete the selected video or delete Multiple videos.
• Default destination: allows you to remove or change the default destination.
• Move to memory card: allows you to move the video to the microSD memory
card.
• Copy to memory card: allows you to copy the video to the microSD memory card.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a Line view or in
Thumbnail view.
• Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an
already locked video.
• Properties: displays the video Name, Date, Format, Size, Length, Quality,
Resolution and Lock/Unlock status.
Music
This options allows you to access your audio files in either your Music list or from
your Memory card.
1. Press the Up or Down navigation keys to scroll between the Music or
Memory card options and press the Select soft key or the
117
key.
Files
• The Memory card option appears only if a microSD card has been previously
installed into the internal slot below the battery. For more information, refer to
"Inserting the Memory Card" on page 7.
• To be accessible Music must be stored into the Music folder on the memory card
2. Highlight the Music folder and press the
key.
3. Highlight a music file and press the Options soft key to choose from the
following options:
• Play: allows you to play the selected audio file on the phone.
• Set as: allows you to set the selected audio as a default Ringtone, Caller
ringtone, or Alarm tone.
• Delete: allows you to delete either the selected audio file or multiple files.
• Move to memory card: moves the selected audio file to the memory card.
• Copy to memory card: copies the selected audio file to the memory card.
• Rename: allows you to rename the selected audio file.
• Lock/Unlock: allows you to lock the audio file to protect it from deletion, or
unlock an already locked audio file.
• Properties: displays the Name, Date, Format, Bit rate, Length, Size, and Lock/
Unlock status of the selected music file.
Other files
This option allows you to view other types of files that you have stored on your
phone. This includes Excel spreadsheets, text files, wmf files, PowerPoint
presentations, PDFs, MHTML and Word documents. You can send these files by
picture message. You can also move or copy the files to your memory card.
Memory card
You can check the contents of your microSD memory card and see what was saved
there.
1. Press the Up or Down navigation keys to scroll between Images, Videos,
Music, Sounds, and Other files.
Note: The Memory card option only displays if a microSD memory card was pre-inserted in your phone.
2. After selecting a folder, press the Options soft key for the following
options:
• Open: allows you to open the folder so you can access its contents.
• Create folder: allows you to create a new folder.
• Properties: lists the Name, Size, Contains, Created Time, and Last modified
time.
Fun & Apps 118
• Memory card info.: allows you to view the settings for Maximum memory
capacity, Used memory space, and Free memory space.
Caution!: Pressing the
key while viewing this option prompts “Formatting will erase all data.
Continue?” and if confirmed, reformats the memory card and erases all data on the card.
For more information on downloading files from your PC to your Memory card,
contact your service provider.
Memory Status
You can check the amount of memory being used and memory remaining for sounds
and images.
䊳
Press the Left or Right navigation keys to scroll between the memory
status of Fun & Apps, Sounds, Images, Videos, Music, JAVA, and Other
files.
Games
You can download MIDlets (Java applications that run on mobile phones) from
various sources using t-zones browser and then store them in the My Games folder.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Games option and press the Select soft key or the
key.
When you access the Games menu, the list of default games displays. Once you
download new games, they are then added to the list.
Creating a New Games Folder
When you download a game using t-zones the file automatically stores in the My
Games folder, however, you can organize and categorize your games by creating
new folders for each game type and then moving the games into those folders.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Games option and press the Select soft key or the
key.
4. Highlight My Games and press the Options soft key.
5. Highlight the Add option and press the Select soft key or the
6. Enter a folder name in the text field.
119
key.
Games
7. When finished, press the Options soft key and select the OK option then
press the Select soft key or the
key.
The new folder is added to the Games menu.
8. Move the game into the new folder. For more information, refer to "Moving
a Game into a New Games Folder" on page 120.
Moving a Game into a New Games Folder
Once you have created a new Games folder you can move your games into the
folders. This option allows you to organize your games by time or other criteria.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Games option and press the Select soft key or the
key.
Browse Games
You can download more games from the T-Mobile website by using the Browse
Games option.
䊳
Highlight the Browse Games option and press the Connect soft key or the
key. The t-zones screen displays with options.
Note: When downloading games, charges may apply. MIDlet game options differ depending on the MIDlet
selected.
Browse games
You can download more games from the website preset by your service provider
using the Browse games option.
Note: Charges may apply when downloading games. For more information, contact your service provider.
Fun & Apps 120
My games
This folder contains the default downloaded games and any other games you
downloaded. After selecting a game, press the Options soft key for the following
options:
Note: Some options are greyed out and not editable (Move to, Delete, and Unlock).
• Start: launches the application.
• Details: displays some of the game development information such as: name,
supplier/vendor, software version, file size, etc...
• Lock/Unlock: allows you to lock the game to protect it from being used.
• Move to: allows you to move the selected game to another user-created folder.
• Delete: allows you to delete the game from this folder.
• Memory status: displays the memory status such as: total available memory,
Used memory, game allocation, and folder memory used.
Music Player
For information on using your music player, see "Music Player" on page 139.
Camera
For information on using your camera, see "Camera" on page 147.
Voice Commands
Voice Commands is an advanced speech recognition software used to activate a
wide-variety of functions on your phone. Voice Commands software automatically
voice activates (up to 200 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name naturally to dial, and use
your voice to look up contacts, launch applications and navigate phone menus.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, say a command. The list of available commands is
listed below.
Note: A list of voice commands briefly displays.
121
Voice Commands
Voice Recognition Commands
• Call <Name or #>: dials a name from your contact list, or dials a number, even if
the number is not stored in the contact list. For more information, refer to
"Contacts List Voice Activation" on page 122.
• Send Text <Name>: displays the Create Text Message screen. For more
information, refer to "Entering Text" on page 60.
• Lookup <Name>: allows you use a voice command to locate and display contact
information stored in the Contacts list. For more information, refer to "Using
Contacts List" on page 65.
• Go to <App>: accesses the Phonebook, Voice notes, Text messages, Picture
message, Call records, t-zones, Calendar, Instant message, and Camera features
of your phone.
• Check <Item>: Lets you check your phone's status (that is signal strength, and
battery in the same report), battery, signal strength, battery, and My phone
number.
Speak clearly when giving your command. If, after a few seconds, the handset does
not recognize your command, a voice prompt asks you to repeat the command. If the
software does not recognize your command the following message displays “Sorry,
no match found,” and voice recognition turns off.
Important!: You must end your current VoiceSignal call before you can make another call.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
Contacts List Voice Activation
On startup VoiceSignal reads your Contacts list and voice-activates all the names.
When you have add or change contacts, VoiceSignal automatically reloads and
voice-activates the list when you add or modify a contact.
Fun & Apps 122
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply speaking the digits into the
phone. No training is necessary, and Digit Dial is programmed to understand natural
speech.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice recognition and press the Select
soft key or the
key.
After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
2. To use Digit Dialing, say “Call” and say the area code and number that you
want to dial at a distance of 3-12 inches from the phone in a natural voice.
3. The number that you said is repeated through the earpiece and your phone
dials the number.
4. If VoiceSignal is not sure of the number that you said, a list of possible
matches displays on the screen.
5. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when
prompted.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your Phonebook. For
information on creating Phonebook entries, see "Understanding Your Phonebook"
on page 65.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice recognition and press the Select
soft key or the
key.
After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
123
Voice Commands
2. To use Name Dialing, say “Call” and the name of the contact that you want
to dial.
3. The name that you said is repeated through the earpiece and your phone
dials the number.
4. If VoiceSignal is not sure of the name that you said, a list of possible
matches displays on the screen.
5. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when
prompted.
6. The location is repeated through the earpiece and your phone dials the
number.
Send Text Message
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice recognition and press the Select
soft key or the
key.
2. After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
3. Say “Send Text” at a distance of 3-12 inches from the microphone. “Say
the Name or Number” plays through the earpiece.
4. After you say a name or number, you might be prompted, “Did you say?”
To confirm a name or number, wait for the beep and then say “Yes.”
5. You can also choose the correct name or number from the choice list using
the phone’s arrow keys.
6. When the Text Message client launches, enter your text message.
Fun & Apps 124
Name Lookup
To perform a name lookup, you’ll need to have some entries in your Contact list.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice recognition and press the Select
soft key or the
key.
After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
2. Say “Lookup” at a distance of 3-12 inches from the microphone. “Say the
name” plays through the earpiece.
3. Say the name exactly as it displays in your Contact list, first name followed
by last name.
4. The contact name displays on the screen with other information that
you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on your phone using VoiceSignal.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice commands and press the Select
soft key or the
key.
After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
2. Say “Go To” at a distance of 3-12 inches from the microphone. A list of
options displays and a prompt of “Please choose” plays through the
earpiece. If the option you desire is not listed, say “Next Menu” to scroll to
the next page.
3. The spoken application menu option is then activated.
125
Voice Commands
Checking Phone Status
Use the Check command to see and hear status information from your phone,
including its phone status, battery level, current signal strength, phone number.
To check phone status:
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in headset or a Bluetooth
headset.
• In the Fun & Apps menu, select Voice recognition and press the Select
soft key or the
key.
After a brief pause, a list of optional commands displays on the screen (and
the “Say a command” message displays on the external screen) and the
audio prompt “Say a command” plays through the earpiece.
2. Say “Check” at a distance of 3-12 inches from the microphone. A list of
options displays and a prompt of “Please choose” plays through the
earpiece.
3. The spoken phone status menu option is then displayed.
Voice Recognition Settings
Choice lists
VoiceSignal uses choice lists when a name or number is not clearly recognized. The
software displays three choices and prompts you to select a choice.
You can modify the way VoiceSignal uses the choice lists in the settings. Each time
VoiceSignal activates you can choose to view the choice list even if there is only one
choice. Additionally, you can choose never to view a choice list, even if there are
multiple choices. When the name or number you speak is not recognized, the
Automatic setting displays the choice list.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
Fun & Apps 126
4. At the voice prompt, press the Settings soft key and select one of the
following:
• Choice lists
- Automatic: VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
- Always On: VoiceSignal always displays a choice list, even when there is only
one choice.
- Always Off: VoiceSignal never displays a choice list.
5. Press the OK soft key or the
key to confirm the selection.
Sensitivity
This option allows you to adjust the sensitivity monitoring of voice tones.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select Sensitivity and
press the Select soft key or the
key.
5. Use the Up or Down Navigation keys to adjust the selected Sensitivity
setting to Reject More spoken commands or names or to Reject Less
spoken commands or names.
6. Press the OK soft key or the
key to accept the new setting.
Digit dialing
If VoiceSignal frequently does not recognize your commands, adapting digit dialing
to your voice improves the accuracy of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not
able to use the handset with VoiceSignal unless the handset is reset to factory
defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation
process takes approximately one minute.
Select location
This option allows you to identify the country or region where you are using the
handset.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
127
key.
Voice Commands
4. At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the
key.
5. Highlight Select location and press the Select soft key or the
key.
6. Use the Up or Down Navigation keys to select your current location.
7. Press the OK soft key or the
key to accept the new setting.
Adapt Digits
To adapt digits perform the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the
key.
5. Highlight Adapt digits and press the Select soft key or the
key.
6. Press the Back soft key or the key to return to Idle mode.
Note: To reset digit dialing to factory default settings, see "Reset settings" on page 118.
Adapting Digit Dialing Tips
• Select a quiet location when using the Adapt Digits feature.
• Wait for the beep (tone) before you begin speaking.
• Say each digit with a clear tone.
• Re-record the sequence if you make a mistake or if there is noise interference.
Adapt digits only if you regularly experience issues with digit dialing.
Reset digits
To reset digits perform the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the
key.
5. Highlight Reset digits and press the Select soft key or the
key.
Fun & Apps 128
Sound
This options allows you to determine which text, names or numbers are spoken
through the speaker or headset.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select Sound and press
the Select soft key or the
key.
5. Select one of the following options:
•
•
•
•
Prompts: allows you to turn audio prompts On or Off.
Digits: allows you to turn audio digit playback On or Off.
Names: allows you to turn audio name playback On or Off.
Name settings: Lets you adjust the speed and volume of your phone’s audio
name playback.
• Speakerphone: allows you to turn voice recognition through the
speakerphone On or Off.
6. Use the navigation keys to highlight the desired setting.
7. Press the OK soft key, Select key or
key to accept the new setting.
About
This options allows provides you with information about the Voicesignal application.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select About and press
the Select soft key or the
key.
Organizer
The Organizer allows you to set alarms, view the calendar, create Tasks, perform
simple math calculations, check world time, perform synchronization, perform unit
conversions, compose notes, set a timer, use a tip calculator, and use a stopwatch.
Alarm
This feature allows you to:
• Set up to 3 alarms to ring at specified times.
• Set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
129
Organizer
The following options are available:
• Wake-up alarm: the alarm rings to wake you up in the morning.
• Alarm 1: set the day, time, and tone for this alarm.
• Alarm 2: set the day, time, and tone for this alarm.
• Auto power-up: alarm rings at the specified time even if the phone is turned off.
If the option is set to Off and the phone is switched off at the specified time, the
alarm does not ring.
To set the alarm:
1. Highlight an alarm and press the Select soft key or the
key.
2. Highlight the Alarm option and press the Right navigation key to set Alarm
to On.
3. Press the Down key to highlight the Alarm time option. Enter the time you
want the Alarm to sound.
4. Press the Down key to highlight the AM/PM option. Press the Left or Right
navigation key to set to AM or PM.
5. Press the Down key to highlight the Monday-Sunday checkboxes. Press
the
key to bring up a list of days.
6. Place a checkmark next to the days you want the alarm to sound. To place
or remove a check mark, press the
key. Press the OK soft key.
7. Press the Down key to highlight the Alarm tone option. Press the
key
to bring up a list of alarm melodies.
8. Press the Up or Down Navigation key to highlight a default alarm melody.
Or, press the Right navigation key to display a list of sounds that you may
choose from.
9. Press the Save soft key.
10. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & Date" on page 93.
11. To stop the alarm when it rings, press any key or press the Snooze soft
key.
Fun & Apps 130
Calendar
With the Calendar feature, you can:
• Consult the calendar by month, week, or day.
• Set schedules and note anniversaries
• Create a miscellaneous event.
• Create tasks.
• Set an alarm to act as a reminder, if necessary.
• Check your memory status.
When you select the Calendar menu, the following options are available:
Month view
When you select this option, the calendar displays the selected month with today’s
date highlighted.
At the bottom of the calendar, the following icons display along with the number of
entries for each:
Schedule items
Anniversary events
Tasks
Miscellaneous items
The number of entries next to each icon reflects the number of entries for the
selected day on the calendar.
The following options are available when you press the Options soft key:
• View mode: takes you to the Day view or Week view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
• Go to: takes you to the Today’s date or another date highlighted.
• Delete: allows you to delete all events for a selected date, delete all events for a
specified period, or delete all events for this month dates. You can also delete all
event.
131
Organizer
Week view
When you select this option, the calendar displays the selected week with today’s
date and time highlighted.
The following options are available when you press the Options soft key:
• View mode: takes you to the Day view or Month view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
• Go to: takes you to today’s date or another date highlighted.
• Delete: allows you to delete all events for a selected date, delete all events for a
specified period, or delete all events for this weeks dates. You can also delete all
events.
Day view
When you select this option, you are taken to the Day view of the selected day with
any events listed. The following options are available when you press the Options
soft key:
- View: takes you to the Day view of the selected day.
- Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
- Send via: allows you to send this event via a Text message or Picture message.
- View mode: allows you to choose between Month view or Week view.
- Delete: allows you to delete all events for a selected date, or delete all events for
this days’ dates. You can also delete all events.
Schedule
This option allows you to write memos to a schedule.
1. Highlight the Schedule option and press the Select soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key or the
key.
4. Enter the subject in the Subject text box then press the Down soft key.
5. Continue to enter other information including Details, Start date, Start time,
AM/PM, End date, End time, AM/PM, Location, Alarm, before, Alarm tone
and Repeat.
6. Press the OK soft key to check the Repeat option.
7. Press the Save soft key when you are finished. Your Schedule information
saves to the Calendar.
Fun & Apps 132
Anniversary
This option allows you to record Anniversaries in your calendar. You can also set an
alarm to remind you of important anniversaries.
1. Highlight the Anniversary option and press the Select soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key or the
key.
4. Enter the occasion in the Occasion text box then press the Down soft key.
5. Continue to enter other information including Date, Alarm, before, Alarm
time, AM/PM, Alarm tone, and Repeat every year.
6. Press the Save soft key when you are finished. Your Anniversary
information saves to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or events in your calendar.
1. Highlight the Miscellaneous option and press the Select soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key or the
key.
4. Enter the subject in the Subject text box then press the Down soft key.
5. Continue to enter other information including Details, Start date, Start time,
AM/PM, End date, End time, and AM/PM.
6. Press the Save soft key when you are finished. Your Miscellaneous
information saves to the Calendar.
Missed alarm events
You can check on all of the alarmed events.
1. Highlight the Missed alarm events option and press the Select soft key or
the
key.
2. To view an event information, highlight an event and press the
key.
The missed alarm event information displays.
3. To acknowledge and remove the event, press the Confirm soft key or the
key. The event is removed from the Missed alarm events menu.
133
Organizer
Memory status
This menu item shows the number of calendar events that are stored on the handset
as well as how much available memory space is left for additional calendar events.
Events are broken down by Schedule, Anniversary, Miscellaneous, and Tasks.
Tasks
This feature allows you to enter a list of tasks.
1. Highlight the Tasks option and press the Select soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key or the
key.
4. Enter the Item to do in the Task text box then press the Down soft key.
5. Continue to enter other information including Start date, Due date, Priority,
and Alarm.
6. Press the Save soft key when you are finished. Your Task list saves to the
Calendar.
Editing the Tasks List
When you select the Tasks list menu, the current contents display with a status
checkbox and a priority marker.
If the item was done, a check displays in the checkbox.
High priority items display a red explanation mark, Normal priority items display a
blue explanation mark, and Low priority items display a gray explanation mark.
1. To mark an item Done, highlight the item and press the
key.
2. Press the Options soft key.
3. Highlight the Done option and press the Select soft key or the
key.
The status checkbox next to the Task item displays a check mark.
4. Highlight the item and press the
key to edit other fields in the Task
item.
5. Press the Options soft key.
6. Highlight the Edit option and press the Select soft key or the
key.
7. Edit the items you wish to change.
8. Press the Options soft key.
9. Highlight the Save option and press the Select soft key or the
key.
Fun & Apps 134
Notes
This feature allows you to create a note.
1. Highlight the Notes option and press the Select soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key or the
key.
4. Enter the note text into the text box then press the Down soft key.
5. Press the Options soft key and select the Save option.
6. Press the Select soft key or the
key when you are finished.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the navigation key
according to the illustration on the display. Use the
key for the
decimal. You can also use the
key to create brackets.
3. Enter the next number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
Tip calculator
This feature provides the percentage amount for tip. Use the following procedures to
calculate a tip amount.
1. Highlight Tip calculator and press the Select soft key or the
key.
2. In the Bill field, enter the check amount.
Note: To enter the decimal point for the exact dollar amount, use the
key.
3. Use the Down Navigation key to highlight Tip(%) percentage. 15 is the
default value but this can be changed.
4. The Tip($) field value is calculated according to the values entered.
5. Use the Down Navigation key to move to the # paying field to change the
number of people contributing to the tip amount.
6. The You pay field displays what each individual is to pay.
135
Synchronization
World Time
This feature allows you to assign two separate time zones to your phone by using
the Left and Right Navigation keys. You can set the first setting to your home city
and then use the second setting to check other city times.
1. Highlight the first field using your Up and Down Navigation keys.
2. Use your Left and Right Navigation keys to then assign the time zone for
that time zone.
3. Repeat steps 1 & 2 for the next time zone entry.
4. Press the Options soft key for the following options:
• Save: this allows you to save your world time settings.
• Apply daylight saving time: use the
key to place a checkmark next to
the cities that you want to set daylight savings time. Each city listed represents a
time zone.
Synchronization
This feature allows you to back up (synchronize) Contact information, Calendar, and
Tasks stored on your phone with your T-Mobile account on the network. Each time
you edit contact information your phone automatically synchronizes with the web
Address Book.
Important!: Synchronization is a free service offered to T-Mobile customers.
For more information, refer to "Synchronization" on page 103.
Sync Now
For more information, refer to "Sync Now" on page 104.
Data to Sync
For more information, refer to "Data to Sync" on page 104.
Viewing the synchronization log
For more information, refer to "Viewing the synchronization log" on page 105.
Fun & Apps 136
About Sync
This feature displays information about how the synchronization feature works and
provides a URL for more specific synchronization information.
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.
Unit Conversion
The conversion menu provides the following conversion categories:
- Currency
- Length
- Weight
- Volume
- Area
- Temperature
To convert a currency, length, weight, volume, area, or temperature, do the
following:
1. Scroll to the conversion feature you wish to use and press the Select soft
key or the
key.
2. Enter the quantity you want converted.
Note: To include a decimal point, press the
key.
3. Use the Navigation keys to select the From and To units of measure for the
quantity you want converted.
4. Press the Options soft key and select the function to perform with the
information entered in the From and To units of measure.
5. Press the Back soft key to return to the Unit conversion menu.
Timer
You can use this menu to set a timer. To enable the Timer, use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
timer.
137
key to start the timer. Press the
key again to stop the
Synchronization
Stopwatch
This feature allows you to use a stopwatch.
1. Press the
key to start the stopwatch.
2. Press the Reset soft key to erase all previously recorded stopwatch times.
3. Press the
key for the lap time. You can use up to 4 separate lap times.
Fun & Apps 138
Section 11: Music Player
Topics Covered
• Music Player
• Music Player Options
• Player Settings
• Adding Music to a Playlist
• Playing Music Files
• Transferring Music Files
• Deleting Music Files From the Memory Card
• Assigning Music Files
This section describes how to use the Music Player to play downloaded music files.
There are also instructions on how to use the Music Setup Wizard.
Music Player
The Music Player allows you to play music files stored on the phone.
Note: Note: The following characters cannot be used in the filename:
< > “ ? / \ : * |
Music Player Options
Use the Options menu to access the Playlist. The Playlist soft key (Up Navigation key)
allows you to change the settings such as repeat or shuffle.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Music player option and press the Select soft key or the
key.
4. Press the Options soft key and select one of the following music player
application options then press the
key.
• Add music from: allows you to add music from either your phone or inserted
memory card. The memory card should contain a Music folder to house the
desired music files.
139
Player Settings
• Open playlist: allows you to display either your current playlist or a userdefined My playlist. For more information, refer to "Adding Music to a Playlist"
on page 142.
• Settings: allows you to configure the media player settings. For more
information, refer to "Player Settings" on page 140.
• Shortcuts: displays the music player shotcuts. For more information, refer to
"Music Player Shortcut Keys" on page 141.
Player Settings
The Player settings menu configures your phone’s music playing options such as
Repeat mode, Shuffle, or Visualization. Settings for the Music menu determine the
order in which music is presented for the selected music category.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Music player option and press the Select soft key or the
key.
4. Press the Options soft key, select Settings, then press either the Select
soft key or the
key.
5. Highlight the Visualization option and then use the Right Navigation key
to cycle through the available music player background visual effects:
Type 1 or Type 2.
6. Highlight the Volume option and then use the Right Navigation key to
choose a playback volume level.
7. Press the Save soft key to store the category selections and return to the
previous Settings menu.
Music Player 140
Music Player Shortcut Keys
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Music player option and press the Select soft key or the
key.
4. Press the Options soft key, select Shortcuts, then press either the Select
soft key or the
key.
Press to increase the volume
Press to decrease the volume
Up allows you to change the settings such as repeat or shuffle.
Down stops the currently playing song.
Left plays the previous song title.
Right Advances to the next song title.
While playing a song if pressed it displays the music player
options.
While playing a song if pressed it displays the Fun and Apps
menu.
Press once to toggle the play state of the current song
(Play/Pause).
Cycles through the available music player background visual
effects: Type 1 or Type 2.
Toggles through the Repeat mode:
• Repeat one: repeats the currently active song.
• Repeat all: replays each song in the current list and as the
last song in the list ends, the player begins replaying all of
the songs in the order the appear within the current list.
141
Adding Music to a Playlist
Toggles the Shuffle mode On or Off.
• Shuffle: the current list of songs are randomly shuffled for
playback.
Adding Music to a Playlist
Before music can be played directly via the Music Player, it is necessary that the
desired playlist be active before music is added. Unless otherwise selected,
Playlist 1 is the default playlist when new music is added from either the phone or
memory card.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Music player option and press the Select soft key or the
key.
4. Press the Options soft key, highlight Open playlist, and press the Right
Navigation key.
5. Select either Current playlist (to add songs to the default playlist -
Playlist 1) or My playlist (to select from the list of available playlists).
• If you selected one of the other available playlist, press the Options soft key,
highlight Open and press the Select soft key or the
key.
6. Press the Options soft key, highlight Add music from, and press the Right
Navigation key.
7. Select either Phone or Memory card (to songs stored in the Music folder)
and press the Select soft key or the
key.
• All supported music files are then displayed in a list.
8. Select the songs you wish to add to your currently selected playlist by
using the Up or Down Navigation keys to highlight the song and then
pressing the or songs you want to add to an existing playlist.
9. Press the
key to place a checkmark alongside the songs you wish to
add or highlight and select the All option.
10. Press the Add soft key to associate all of the selected songs to the
currently active playlist.
Music Player 142
Playing Music Files
Music can either be played indirectly (without the use of the Media player or
playlists) by using the Fun & Apps > Files > Music feature (page 117) or directly by
selecting a desired playlist of songs which are then played through the media player.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Music player option and press the Select soft key or the
key.
4. Press the Options soft key and select the Open playlist option. The
current playlist information displays.
5. Press the Left and Right Navigation keys to access the desired playlist.
6. Press the Up or Down navigation keys to highlight the song to which you
want to listen, and press the
key to begin playing the selected song.
Note: The Navigation keys can be used to play, pause, stop, and select either the next or previous songs
from the current list.
7. While listening to a music file, press the Options soft key for the following
options:
• Pause: allows you to pause the song you are listening to. Press the
to
resume the song.
• Open playlist: allows you to display either the current playlist or select from one
of the remaining three playlists (four total).
• Remove from playlist: allows you to remove the actively playing song from the
current playlist.
• Settings: allows you to configure the media player settings.
• Properties: displays the file properties such as: file name, creation date,
format, bitrate, length, file size, and lock/unlock state.
• Shortcuts: displays the current shortcut key functions related to the media
player application.
143
Transferring Music Files
Transferring Music Files
Music files can be downloaded to the phone via one of two methods:
• Downloaded to the phone from t-zones > Downloads.
- Music files can be directly stored on your phone from this site.
- For more information, refer to "t-zones" on page 160.
• Downloaded to the phone via a direct USB connection.
- Music files are stored into a Music folder on the microSD card.
- For more information, refer to "USB settings" on page 96.
Deleting Music Files From the Memory Card
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
4. Highlight the Memory card option and press the Select soft key or the
key.
5. Press the Up or Down navigation keys to highlight the Music folder which
contains the songs you want to delete and press the
key.
6. Press the Up or Down navigation keys to highlight the song to delete.
7. Press the Options soft key, highlight Delete, and press the Right
Navigation key.
8. Select either Selected (to delete a single song) or Multiple (to delete
several songs).
• If you selected Multiple, you select a song by first highlighting it and then
pressing the Delete soft key or the
key. Selecting All places a checkmark
next to all detected songs.
9. At the “Delete?” prompt, press the Yes soft key to accept the deletion or
the No soft key to cancel the process.
Music Player 144
Assigning Music Files
You can choose to assign music files as the Default Ringtone, Caller ringtone or as
an Alarm tone. Songs used for these types of assignments must be copied to the
phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
4. Highlight the Music option and press the Select soft key or the
key.
5. Press the Up or Down navigation keys to scroll between Music or Memory
card options and press the Select soft key or the
key.
• The Memory card option displays only if a microSD card was installed into the
internal slot below the battery. For more information, refer to "Inserting the
Memory Card" on page 7.
• Music must be stored in the Music folder.
• Is you selected Memory card, you must highlight the Music folder and press the
key.
6. Highlight a music file and press the Options soft key.
7. Highlight the Set as option and then press the Right Navigation key to
assign the selected song to a ring type.
• Set as: allows you to set the selected audio as a Default Ringtone, Caller
ringtone, or Alarm tone.
• This type of audio assignment requires the song to be stored on the phone.
• If the selected song is on the memory card, you are prompted to copy the music
file to the phone prior to use. Press the Yes soft key to continue copying the song
to the phone or No to cancel the operation.
Assigning a music file as a ringtone
1. Follow steps 1 - 6 from the previous section.
2. Highlight the Set as option and then press the Right Navigation key.
3. Highlight the Default Ringtone option and press the Select soft key or the
key.
4. At the “Copy to phone and set as ringtone?” prompt, press the Yes soft
key to continue copying the song to the phone or No to cancel the
operation.
145
Assigning Music Files
Assigning a music file as a Caller ringtone
1. Follow steps 1 - 6 from the previous section.
2. Highlight the Set as option and then press the Right Navigation key.
3. Highlight the Caller ringtone option and press the Select soft key or the
key.
4. From the Contact list, press the Up and Down Navigation keys to highlight
a contact entry and press the Select soft key or the
key to assign the
song. The selected audio file is assigned to the contact entry as part of
their Caller ID. When this contact calls you, the associated music file plays.
Assigning a music file as an alarm tone
1. Follow steps 1 - 6 from the previous section.
2. Highlight the Set as option and then press the Right Navigation key.
3. Highlight the Alarm tone option and press the Select soft key or the
key.
4. From the Alarm list, press the Up and Down Navigation keys to highlight an
alarm entry and press the Select soft key or the
properties of the alarm.
key to open the
5. Press the Save soft key to store the music file to the selected alarm.
Music Player 146
Section 12: Camera
Topics Covered
• Using the Camera
• Take and Send
• Record video
• Photos folder
• Videos
• My Album
• My Journal
This section explains how to use the camera on your phone. You can take photographs
by using the built-in camera functionality.
Using the Camera
Using the camera module in your phone, you can take photos of people or events
while on the move. Additionally, you can send a link to your My Album online to other
people, set the picture as a Wallpaper, or as a Caller ID image.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
Tip: Press the
key to enter the menu.
key on the right side of the phone as a shortcut access to the camera module.
3. Highlight Camera and press the Select soft key or the
147
key.
Take and Send
4. Highlight Take and Send and press the Select soft key or the
key.
5. Adjust the image by aiming the camera at the subject.
6. Prior to taking a picture, press the Options soft key to access the camera
options. For details, see "Configuring Camera Options" on page 150.
Tip: You can use the keypad to quickly change the camera options.
7. Press the
or
key to take the photo. The screen displays the
Send to: My Album Online ? option.
8. Press the
key, which shows as REC on the display before you save
or send the photo to a location, to record an audio clip to be attached to the
photo. Press the Stop soft option key to end the recording.
9. Once you have completed the audio clip or if you do not want to add an
audio clip, press the Yes soft key if you want to send the photo to your TMobile My Album Online service. The phone’s default destination is set to
My Album. The photo is automatically saved in the Photos folder in the
phone.
Note: To change the default destination for your pictures, press the Options soft key when Send to: My
Album Online? displays on the screen. Highlight the Default destination option and the Change
option. You can then change your default destination to a Recent recipients, Phonebook, Phone
number, Email address, My Album, and My Journal.
10. To send the newly taken photograph, press the Options soft key.
11. Highlight Send to and press the Select soft key or the
key.
12. Select from one of the following destinations by pressing the Up or Down
Navigation key:
• Recent recipients: allows you to send to one of the recent recipients.
• Phonebook: allows you to select a recipient from the phonebook.
• New recipient: allows you to enter the phone number and e-mail address of a
new recipient.
• My Album: sends the message to My Album.
• My Journal: sends the message to My Journal.
13. To return to Capture mode, press the Back soft key.
14. Press the Options soft key and select Take another.
15. Press the
key to take another picture.
16. Press the
key to return to the Idle mode.
Camera 148
Configuring Picture Options
After you take a picture, press the
key to access the photo’s Options menu for
the current photograph. This list of options differ from the Camera’s main menu
which allows you to configure options for the camera and not for the picture.
The following options are available:
• Take another: returns you to camera mode to take another photo.
• Send to: displays the Send to menu and allows you to select a destination for the
currently taken photograph. This destination can be a single or multiple
recipient(s) (such as, Recent recipients, Phonebook, Phone number or Email
address) or to a remote folder such as My Album or My Journal.
• Edit message: allows you to edit the contents of the outgoing picture message
(such as Subject, Photo, Sound and Text).
• Set as: allows you to use the current photo as an Caller ID or Wallpaper.
• Default destination: allows you to Remove a current destination location or
Change the current location by establishing a new folder in which to place the
pictures. Select from the following options: Recent recipients, Phonebook, Phone
number, Email address, My Album, or My Journal.
Note: To change the default destination for your pictures, highlight the Default destination option, press
the Right Navigation key, then select Change.
• Edit Image: allows you to edit the photo. Image editor has the following options:
- Send via: allows you to send the photo using a Picture Message.
- New image: allows you to open an existing photo or take another photo.
- Save as: allows you to save the photo to your default destination and with a default
name. You may alter the default name.
- Effects: allows you to edit the photo using the following effects:
•
•
•
•
No effects
Black & White: allows you to save the photo as a black and white image.
Negative: allows you to save the photo as a reverse image of the photo.
Sepia; allows you to save the photo with a yellowish brown effect, as if the photo
were old.
• Emboss: allows you to save the photo as an embossed image.
• Sketch: allows you to save the photo as a sketch.
- Insert: allows you to insert a frame, an emoticon, or clip art into the photo.
- Set as: allows you to set the photo as caller ID, or as wallpaper.
- Undo: allows you to undo any editing done to the photo.
• Delete: allows you to delete the selected photo.
149
Take and Send
• Rename: allows you to overwrite the currently defaulted photo name.
• Go to photos: takes you to your Photos folder.
• Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock an
already locked photo.
• Properties: shows the properties of the current photo such as the Name, Date,
Format, Resolution, Size, and Lock/Unlock.
1. To return to the Capture mode, press the Clear
2. Press the
key.
key to return to Idle mode.
Configuring Camera Options
1. In Capture mode (prior to taking a new photo), press the Options soft key
to use various options for the camera module.
The following options are available:
- Record video: allows you to switch to the camcorder mode and shoot video.
- Shooting mode: allows you to assign what sequence is followed when a photograph
is taken.
• Single shot: a single picture is taken.
- Take and Send: allows you to take a photo and then send it immediately as part
of a Picture message.
- Take and return: allows you to take a photo, store it the My Photos folder, and
then return to the main camera screen to shoot a new one.
• Multi-shot: multiple pictures are simultaneously taken.
- The combination consists of a combination of 6, 9, or 15 pictures taken at either
a normal or high resolution.
- Options include: 6 shots.Normal, 6 shots.High, 9 shots.Normal, 9 shots.High,
15 shots.Normal, or 15 shots.High.
• Mosaic style: the picture is taken and a mosaic effect is overlaid to produce a
mosaic style photo.
- Effects: allows you to change the color tone or apply special effects to the photo.
• Options include: No effects, Black & White, Negative, Sepia, Emboss, Sketch,
and Aqua.
- Frames: allows you to overlay from up to 29 different frames atop the photo.
- Timer: allows you to set a time delay before the camera takes the photo. Select the
length of delay you want. When you press the
or
key, the camera takes
the photo after the specified time elapses.
- Default destination: removes or changes the default destination for the selected
Photo.
- Go to photos: takes you to your Photos folder.
- Camera settings: allows you to change the Function and Setup settings.
Camera 150
• Photo settings - refer to the following.
• Set up - refer to the following.
Camera Shortcuts
• You can change options using your keypad in capture mode. The following short
cuts are available:
Up and Down navigation keys zoom in and out.
Left and Right navigation keys adjust the image brightness.
Up arrow zooms in or enlarges the view of the photo.
Down arrow zooms out or decreases the view of the photo.
toggles between camera and video mode.
allows you to set the camera size.
changes the camera Shooting mode.
changes the color tone or applies a special effect to the image.
adjusts the white balance setting.
allows you to select a custom frame border for your photo.
sets a time delay.
sets the ISO speed.
takes you to the Photos menu.
enlarges the display screen.
151
Record video
Photo Settings
• Size: allows you to set the image size to either: SXGA(1280 x 1024),
XGA(1024 x 768), SVGA(800 x 600), VGA(640 x 480), QVGA(320 x 240), Mobile(176
x 220), QCIF(176 x 144).
• Viewfinder mode: allows you to set the view finder to Full screen, Full screen &
Indicator, Full screen & Guideline, Actual screen.
• Scene program: allows you to set the camera options to record normal or night
scene.
• Metering exposure: allows you to set how the camera measures or meters the
light source: Matrix (several positions), Center-weighted, or Spot.
• White balance: allows you to set this option from the following choices: Auto,
Daylight, Incandescent, Fluorescent, or Cloudy.
• ISO: allows you to set film speed (ISO speed) of the camera from the following
choices: Automatic, 100, 200, or 400.
Setup Options
• Shutter sound: allows you to select a tone to play when the camera’s shutter opens
and closes. Sound selections are Shutter1, Shutter2, and Shutter3.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On or Off.
• Default name: allows you to change the default name assigned to your photo.
Record video
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your
subject with sufficient light by putting the light source behind you.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
4. Select Record video then press the Select soft key or the
key.
key.
5. Before filming the video, press the Options soft key to access camcorder
options (see below).
6. Adjust the image by aiming the camera at the subject.
7. Press the
key to begin shooting video.
8. Press the Stop soft key to stop the recording.
Camera 152
-orPress the
key to stop the recording and save the video file to your
Videos folder.
9. Once the file saves, press the
key to play back your video for review.
Camcorder Options
1.
Before shooting the video, press the Options soft key to access the
camcorder options.
• Take picture: toggles from video to camera mode.
• Effects: sets a custom color tone for your video. Choose from the following
Effects Mode.
- Options include: No effects, Black & White, Negative, Sepia, Emboss,
Sketch and Aqua.
• Timer: sets a time delay before the camcorder begins to shoot video.
- Off
- 3 seconds
- 5 seconds
- 10 seconds
• Default destination: allows you to Remove or Change where your videos are
sent after you take them.
• Go to videos: accesses the list of videos stored within the Video folder. Highlight
a video and press the Options soft key to view the following options for these
clips:
- Play: plays the video clip.
- Send to My Album: sends the video to a special folder called My Album.
- Send via: attaches the multimedia file to a picture message.
- Delete: deletes either Selected or Multiple multimedia videos.
- Default destination: allows you to Remove or Change where your videos are
sent after you take them.
- Move to: moves either an original Selected or Multiple video file to the Memory
card.
- Copy to card: copies either Selected or Multiple videos and then sends them
to the Memory card.
Note: The Move and Copy features are available when a memory card is inserted.
- Rename: renames either Selected or Multiple videos.
- View by: displays the available listing of videos in either a Line view or
Thumbnail view.
153
Record video
- Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock
an already locked video.
- Details: displays the properties of the current video such as Name, Date,
Format, Resolution, Size, Length, Quality, and Lock/Unlock.
• Camcorder settings: customizes your camcorder settings. Choose from the
following options:
- Recording mode: sets the maximum allowable recording time. Choose
Limit for message, or Normal.
- Size: sets the video size. Choose Sub-QCIF(128x 96), or QCIF(176 x 144)
when the Recording mode is set to Limit for message. Choose Sub-QCIF(128x
96), QCIF(176 x 144), or QQVGA(160 x 120) when the Recording mode is set
to Normal.
- Audio Record: allows you to choose whether to use audio in your video.
Choose between On or Off (microphone is muted).
- White balance: sets the white balance for the camcorder. Choose
Automatic, Daylight, Incandescent, Fluorescent or Cloudy.
- Zoom sound: turns the Zoom sound Off or On.
- Brightness sound: turns the Brightness sound Off or On.
- Default name: allows you to alter the default name for videos.
• Camcorder shortcuts: displays the shortcut keys associated when using the
camcorder (see page 155).
2. Press the OK key to return to the picture viewer.
3. You can use the keypad to quickly change the camera options using the
camera shortcut keys. For more information on camera shortcut keys, see
"Camcorder Shortcuts" on page 155.
Once the video has been recorded, the following options are available:
• Record another: allows you to record another video.
• Edit message: allows you to edit a picture message to add the video to.
• Delete: allows you to delete the video.
• Rename: allows you to rename the video. When the video is recorded, it is
automatically saved with a default name.
• Default destination: Allows you to remove or change where your videos are sent
after shooting them.
• Go to videos: Allows you to move the selected files to the video folder.
• Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock an
already locked video.
• Properties: allows you to view the properties of the video.
Camera 154
Camcorder Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
shoots video.
Up arrow zooms in on the video.
Down arrow zooms out on the video.
Up and Down navigation keys zoom in or out.
Left and Right navigation keys adjust the image brightness.
switches the handset between camcorder and camera mode.
changes the video size.
changes the recording mode.
changes the effects used on the video.
allows you to adjust the white balance.
within the camcorder mode, this toggles the microphone On/Off
(mute).
sets a time delay (Off, 3, 5, or 10 seconds).
navigates to the My video clips folder.
155
Photos folder
Photos folder
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select Photos and press the Select soft key or the
key.
When you access this menu, your phone displays the photos in Line view,
which shows them as small images. Use the Navigation keys to scroll
through the photos.
5. To view the photos on the full screen, highlight an image and press the
key. To go back to Line view, press the Back soft key or the
key.
6. From the list, press the Options soft key to use the following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send the selected photo to your My Album
folder.
• Send via: allows you to send the photo via a picture message.
• Set as: allows you to set the photo as your Caller ID or Wallpaper.
• Delete: allows you to delete the selected or multiple photos.
• Default destination: allows you to change where your photos are sent after
you take them: Recent recipients, Phonebook, Phone number, Email address,
My Album, or My Journal.
• Move to memory card: removes the image from the phone’s onboard
memory and then moves it onto the inserted memory card.
• Copy to memory card: makes a copy of the photo and then moves the copy
onto the inserted memory card.
• Edit image: allows you modify the current image by inserting objects (such as
frames, emoticons, or clip art) or also overlaying image effects onto the photo
such as: Black&White, Negative, Sepia, Emboss, or Sketch.
• Rename: allows you to rename the photo.
• Display mode: allows you to view the pictures in Line view or Thumbnail
view.
• Slide show: allows you to see all of your photos in a slide show presentation.
Choose from 1 or 3 seconds intervals.
• Lock/Unlock: allows you to lock the photo to protect it from deletion, or unlock
an already locked photo.
• Properties: shows the properties of the photo, such as the file name, file date,
file format, image resolution, file size, and lock/unlock status.
Camera 156
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to delete. Press the
Options soft key and select Delete.
2. Press the Select soft key then press the Right Navigation key.
3. Select Selected or Multiple and press the Select soft key or the
key.
4. Press the Yes soft key to confirm the deletion.
5. Press the
key to return to Idle mode.
Videos
To access your videos:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select Videos and press the Select soft key or the
key.
When you access this menu, your phone displays the videos in Line view,
with the initial frame shown as small images. Use the Navigation keys to
scroll through the videos. The Video folder cotains a list of videos you have
recorded, videos downloaded from the web server, or videos received in
multimedia messages.
5. Select a video clip from your Videos folder by scrolling to the video you
want to view, highlighting it and pressing the Options soft key to choose
from the following options:
• Play: plays the selected video.
• Send to My Album: moves the video to your My Album folder.
• Send via: sends the video using a picture message.
• Delete: deletes the selected video or all videos.
• Default destination: allows you to change where your videos are sent after you
take them: Recent recipients, Phonebook, Phone number, Email address, My
Album, or My Journal.
• Move to memory card: allows you to move the Selected or Multiple videos to
the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple videos to
the Memory card.
• Rename: changes the name of the video.
157
My Album
• Display mode: allows you to view the pictures in Line view or Thumbnail
view.
• Lock/Unlock: locks the video to protect it from deletion or unlocks it to allow
deletion.
• Properties: displays the video name, date, format, resolution, date, length,
quality, and lock/unlock status.
My Album
My Album is a private online picture album that you can use to store and share
pictures, videos, voice messages, and text.
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply. The feature is not activated until you send your first
image to the remote My Album location.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My Album and press the Select soft key or the
key. The
t-zones browser is then launched and the T-Mobile Web page displays.
5. Select the My Albums Menu link and press the Select soft key or the
key.
6. Photos sent to this folder are stored in the Inbox Album. Press the
key to view the photos.
7. Press the
key to exit t-zones and return to the Idle screen.
My Journal
Make notes in My Journal, your online diary and Weblog. Keep it private to store your
personal memories, or send email invitations to ask people to view and comment on
your album. Contact T-Mobile customer service for more information.
Note: Charges may apply when accessing My Journal. Contact your T-Mobile service representative.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
Camera 158
4. Select My Journal and press the Select soft key or the
key. The
t-zones browser is then launched and the T-Mobile Web page displays.
Important!: You must log in from a web browser and set up My Journal before you can access it.
159
t-zones
Section 13: t-zones
Topics Covered
• t-zones
This section outlines the t-zones features available on your phone. For more
information, contact T-Mobile.
t-zones
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
provides you wireless access and navigation to the Web using your phone.
Tip: Press the t-zones soft key
while in Idle mode to bypass the t-zones menu.
To access t-zones via the menu, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the t-zones icon. Press the Select soft
key or the
key to enter the menu.
-ORTo access t-zones directly, follow these steps:
• In Idle mode, press the t-zones soft key to access the t-zones menu.
The following options are available:
Home
Press the Menu soft key to select this menu and connect the phone to the network
and loads the t-zones homepage.
The content of the t-zones startup homepage depends on your Wireless Web service
provider. To scroll through the screen, use the Up and Down keys.
To go to the startup homepage from any other screen in the t-zones, use the Home
option. For more information on the t-zones menus, see "Selecting and Using Menu
Options" on page 161.
Exiting the t-zones
䊳
To exit the browser at any time, simply press the
key.
t-zones 160
Navigating the t-zones
1. To scroll through browser items, press the Up or Down Navigation key.
2. To select browser items, press the Options soft key, highlight Select and
press the OK soft key.
3. To return to the previous page, press Options soft key, highlight Back and
press the OK soft key.
4. To return to the startup homepage, press the Menu soft key, highlight
Home and press the Select soft key.
Entering Text in the t-zones
While you are navigating the t-zones you often need to enter text, such as when
entering a URL. You can enter alphanumeric characters by using your phone’s
keypad. For more information, refer to "Entering Text" on page 60.
Selecting and Using Menu Options
Various menus are available when you are using t-zones to navigate the Wireless
Web.
To access the browser options menu:
䊳
Press the Menu soft key.
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
- Go to URL: allows you to manually enter the URL address of a Web page. After
entering an address, press the
key to go there directly.
- Bookmarks: shows the bookmarks list. You can bookmark the current web page or
access previously bookmarked pages.
- Messages: allows you to create a text message or check your My messages folder.
- My files: allows you to go to your Files folders.
- Home: takes you back at any time to the home page of the Wireless Web service
provider.
- Back: takes you back to the previous web browser screen.
- Show URL: displays the URL address of the Web page to which you are currently
connected. It also enables you to set the current site as the startup home page.
- Reload: reloads the current page.
161
t-zones
Enter URL
This menu allows you to manually enter the URL address of a web site that you wish
to access.
For further details about entering characters, see "Entering Text" on page 60.
Bookmarks
This menu stores up to 15 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or the
key.
2. Enter a name for the favorite item in the Name text box and press the
Down key.
3. Enter the address in the URL text box and press the Options soft key.
4. Highlight the Save option and press the Select soft key or the
key.
Note: For further details about how to enter characters, see "Entering Text" on page 60.
5. Highlight an item after saving favorite items, then press the Options soft
key to access the following:
• Open: navigates to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address.
6. Select the favorite item and press the
site.
key. Your browser displays the
Clear Cache
You can clear the information stored in the cache, which is the phone’s temporary
memory which stores the most recently accessed web pages.
䊳
At the Are you sure you want to clear? prompt, press the Yes soft key to
confirm the deletion. Otherwise, press the No soft key.
t-zones 162
Section 14: Health and Safety Information
Topics Covered
• Health and Safety Information
• Samsung Mobile Products and Recycling
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Responsible Listening
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
163
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
• Head: 0.662 W/Kg.
• Body-worn: 1.43 W/Kg.
Health and Safety Information 164
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
165
Consumer Information on Wireless Phones
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Health and Safety Information 166
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
167
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
Health and Safety Information 168
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
169
Consumer Information on Wireless Phones
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
Health and Safety Information 170
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
171
Road Safety
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
Health and Safety Information 172
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies.
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
173
Responsible Listening
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
Health and Safety Information 174
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/health/hearing
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
175
Using Your Phone Near Other Electronic Devices
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Health and Safety Information 176
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
177
FCC Notice and Cautions
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
Health and Safety Information 178
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
179
Availability of Various Features/Ring Tones
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in serious safety
hazards.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Health and Safety Information 180
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices could result
in damage to the equipment and a possible risk of fire, explosion, leakage, or other
serious hazard.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
181
Care and Maintenance
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
Health and Safety Information 182
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
183
Standard Limited Warranty
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
Warranty Information 184
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
185
Standard Limited Warranty
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information 186
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
187
41
Index
A
ABC mode 60
Accessing a Menu Function 51
Alert type 101
B
Backlight
description 21
settings 98
Battery
charging 11
installation 9
installing 9
low indicator 13
Bluetooth
about 100
help 100
searching for new devices
100
services 100
turning bluetooth on and off
100
Brightness 98
Broadcast Messages 91
C
Calendar 131
Call Barring 107
Call Functions 39
adjusting the call volume 41
answering a call 41
call records 41
correcting the Number 40
ending a call 40
making a call 39
making a call from phonebook
redialing last number 40
silent mode 44
Call Records
all calls 42
call time 44
delete all 43
incoming calls 43
missed calls 42
outgoing calls 43
Call Waiting 48 107
Caller ID 108
Camcorder Options 153
camcorder shortcuts 154
default destination 153
effects 153
go to video 153
settings 154
timer 153
Camera 121 147
taking photos 147
Camera Options
timer 150
Camera Shortcuts
shortcut keys 155
Change password 109
Charging battery 11
Configuring Picture Options 149
,
,
D
Delete All 89
Deleting Music Files 144
Dialing a Number
phonebook 70
SIM card 68
Dialing display 99
background color 99
font color 99
font size 99
188
Instant Messaging 91
options 92
starting 91
International Call 39
Display
backlight 21
icons 20
Drafts 88
DTMF 47
E
Entering Text 60
Changing the Text Entry Mode
60
using ABC mode 63
using number mode 64
using symbol mode 64
using T9 mode 61
Extra tones 103
F
Files 112
Fun & Apps 112
Functions and Options 44
G
Games 119
create a new Games folder
119
Getting Started 5
activating your phone 5
voice mail 13
H
Health and Safety Information 163
Help 22
HiFi Ringers 101 113
,
I
Icons, description 20
Information display 98
Inserting
memory card 7
189
K
Keypad Tone 101
L
Low battery indicator 13
M
Making a Call
phonebook 41
MegaTones 101 113
Memory Card
inserting 7
Memory card 118
Memory Status 91
Menu Navigation 51
menu outline 52
Message settings 90
picture message 90
receive settings 90
send settings 90
text message 90
Message Tone 102
Messages 77
Messaging
types of messages 77
microSD memory card 118
Missed Call
viewing 42
Multi-Party Call 48
dropping one participant 50
private conversation 49
setting up 49
,
Music Player 139
adding music 142
assigning 145
assigning a caller ringtone
146
assigning alarm tone 146
assigning ringtone 145
options 139
playing music 143
settings 140
shortcuts 141
Mute 46
My Album 115 158
My Journal 115 158
,
,
N
Network Selection 108
Network Services
call barring 107
call forwarding 106
call waiting 107
Caller ID 108
network selection 108
Notes 135
Number mode 60
O
On/off switch, phone 13
Options
during a call 46
making a new call while in a
call 46
putting a call on hold 46
Organizer 129
alarm 129
calculator 135
calendar 131
Stopwatch 138
synchronization 136
timer 137
tip calculator 135
unit conversion 137
world time 136
Outbox 87
Own Number 75
P
Phone
icons 20
switching on/off 13
Phone Keys 16
Phone lock 109
Phone Settings 95
Phonebook
searching for a number 47
Photos
accessing pictures 156
deleting pictures 157
Picture Message
viewing 85
viewing after receiving 87
Picture Messages 79
PIN
change 109
check 109
R
Recording Video 152
Reset settings 111
Ring tone 101
Ring Volume 101
S
Security 109
Settings 93
bluetooth 100
display 97
network services 106
190
phone 95
reset 111
security 109
sound 100
synchronization 103
Time & Date 93
voice recognition 126
Shortcuts 52
Silent mode 103
SIM card
installing 5
Skin 98
Slide settings 95
Slide tone 103
Soft Keys 45
Sound Settings
alert type 101
extra tones 103
HiFi ringers 101
incoming call 100
keypad tone 101
MegaTones 101
power on/off tone 102
ring tone 101
ring volume 101
silent mode 103
slide tone 103
Speakerphone 47
Speed Dial
setting up entries 71
Standard Limited Warranty
183
Stopwatch 138
Storing a Number
phone’s memory 66
SIM card 67
191
Switching on/off
phone 13
Symbol mode 60
T
T9 mode 60
Take and Send 147
Task List 134
Templates 88
Text input mode
changing 60
Text Message
viewing 84
Text Messages 78
Timer 137
Transferring Music Files 144
Travel adapter 11
t-zones 160
bookmarks 162
Enter URL 162
entering Text 161
exiting 160
home 160
navigating 161
U
Understanding Your Phone 15
closed view 18
open view 16
phone features 15
Understanding Your Phonebook 65
adding a new contact 66
finding a phonebook entry 69
using contacts list 65
USB settings 96
V
Videos 116
Voice Commands 121
menu 121
Voice Mail 14 89
changing number 14
Voice Note
listening 86
Voice Notes 82
VoiceSignal
checking phone status 126
commands 122
digit dial 123
name dial 123
name lookup 125
open applications 125
send text message 124
,
W
Warranty Information 183
Wi-Fi
add new network 35
available networks 27
connection 25
help 38
quick connect 32
security key 33
192
Download PDF