Wacker Neuson's practical cut-off saws and demolition hammers save costs without compromising results. They facilitate work processes and further improve results. They are designed, manufactured, and serviced in accordance with the principles of the Wacker Neuson quality standards. They, too, are included in the promise we make about our products and services: reliability, trustworthiness, quality, fast reaction, flexibility, and innovation. 1 Demolition hammers with gasoline engines or electric motors For resounding success with concrete and asphalt: easy to use and highly efficient. 2 Gasoline cut-off saws with up to 147 mm cutting depth For tough continuous use on site: Extremely light and easy to use. 0988159/08/2009/Heidlmair/Print Sta Demolition as a construction process: Wacker Neuson offers everything to support the pros. Gasoline-driven floor saws. The gateway to good results in asphalt and concrete. From Wacker Neuson. An inve Wacke ntion by r Neus on: THE F W I T H L O O R S AW AUTO PILOT . 1 2 Please note: The product range of the Wacker Neuson Group comprises more than 300 different product groups in the light and compact equipment areas. In the light equipment area the product range comprises various device types – according to different voltage and frequency conditions, local regulations, market specifics and operating conditions. Not all Wacker Neuson products listed or shown here are therefore available or approved in all countries. Modifications reserved in the interest of continuous further development. The Wacker Neuson Group does not accept any liability whatsoever for the correctness and completeness of the data given in this brochure. Reprints permissible only with prior approval in writing by the Wacker Neuson Group, Munich. © Wacker Neuson SE 2009. All rights reserved. www.wackerneuson.com Always a cut above: Floor saws from Wacker Neuson. DEMOLITION SYSTEMS Page 6 FLOOR SAW - BFS 935 Page 8 FLOOR SAW - BFS 1345 Page 10 FLOOR SAW - BFS 1350L Page 12 FLOOR SAW - BFS 1350ALS Page 16 ACCESSORIES - Diamond blades 2_3 WACKER NEUSON FLOOR SAWS Efficient cutting elements on site are essential for a swift and cost-effective construction phase. All floor saws from Wacker Neuson impress with their quality and operational readiness: • Top cutting speed and smooth running. • Infinitely adjustable cutting depth. • Some models have quick-lift. • First-class quality built-in materials. • Excellent engine performance. • Also available with innovative autopilot. Floor saws 4_5 WACKER NEUSON FLOOR SAWS Top cutting speed and smooth running: BFS 935. The BFS 935 has even more to offer: •High directional stability thanks to the highly durable frame and the ball bearing mounted wheels. 1 Extended central suspension. 2 Water tank with 32 liter volume. 3 The individually adjustable handle ensures an effortless working position. Retractable for storage and transport. FOR IDEAL DARD TA N ALL S TICES. PRAC •Infinitely adjustable cutting depth thanks to a practical crank. 4 External water supply option using a Gardena connector. •W ith the capacity to hold 32 liters, the BFS 935 has the largest water tank in its class. •With the load on the central suspension, the equipment is always balanced. This ensures that the rear wheels always touch the ground first and never the cutting blade. •The BFS 935 The first-class cutting performance is in a class of its own. BFS 935 floor saws deliver maximum engine performance exactly where it belongs: in asphalt and concrete. This is because the torque transferred to the diamond blade and the center of gravity lying over the cutting shaft are efficiently aligned. As a result, floor saws from Wacker Neuson are up to 20 % faster than similar products. 6_7 WACKER NEUSON FLOOR SAWS 1 2 front wheels are positioned behind the cutting shaft for a continuous cut on uneven ground or curb edges. •Lightest machine in its class. BFS 935 3 4 Engine output 9 HP Blade diameter 35 cm Floor saw Up to 20 % faster than similar products: BFS 1345. The BFS 1345 is available either with a normal or shortened wheelbase. The shortened wheelbase makes the machine even easier to use. 1Normal wheelbase 2Shortened wheelbase ST IN IGHTE S. L E H T LAS ITS C BFS 1345 Top cutting performance with wide blade diameter: BFS 1345. The BFS 1345 offers even more engine power and a deeper cutting depth of up to 17 cm. The torque transferred to the diamond blade and the center of gravity lying over the cutting shaft are so efficiently aligned, that the BFS 1345 is up to 20 % faster than similar products. Naturally, the BFS 1345 also offers the same benefits as the BFS 935 on page 7. 8_9 WACKER NEUSON FLOOR SAWS 1 BFS 1345 2 Engine output 13 HP Max. blade diameter 45 cm Floor saw Faster, more precise and easier to handle: The BFS 1350L quick-lift. Quick changeover of cutting blade from left to right: -LIFT QUICK W I T H N F I N I T E LY A N D I S TA B L E ADJU DEPTH. ING CUTT 1 Raise cutting blade guard. 2 Remove diamond blade. 3 Loosen screws and remove cutting blade guard. 4 Reassemble diamond blade and cutting blade guard on the other side. The BFS 1350L has even more to offer: •Smooth cutting and stable straight running thanks to the machine's optimal center of gravity. This results in only slight wear and tear on the side of the cutting blade. The cutting blade can be mounted on the left or right – depending on the site requirement. •Drive using powerful Wacker Neuson engine. Also available with Honda engine. •Economic cutting blade drive: High-performance belts with belt tensioners offer a long life and low maintenance costs. BFS 1350L •Adjustable water sprinkler thanks to integrated, removable water tank with large filler opening and high capacity. Efficient, fast performance is the first thing you notice when using a BFS 1350L: The infinitely adjustable cutting depth combined with a quick-lift function make the BFS 1350L a first-class assistant on the construction site. The quick-lift function works by ensuring that the cutting blade can be easily lifted out of the cut without changing the cutting depth already set. Which means you don't have to keep resetting the blade – making cutting work fast, precise and convenient. 10 _ 11 WACKER NEUSON FLOOR SAWS •Long wheelbase with front wheels in front of the cutting shaft: Ensures excellent stability. With the practical quick-lift lever the cutting depth is preset and remains set even after moving or lifting the saw. BFS 1350L Engine output 13.5 HP Max. blade diameter 50 cm Floor saw Integrated autopilot for best results: BFS 1350ALS. y ntion b An inve euson: N r Wacke S AW LOOR T H E F U T O P I L O T. A WITH BFS 1350ALS Advantages of autopilot: Optimum feed rate thanks to autopilot: The autopilot integrated in the BFS 1350ALS ensures constant optimum feed rate during operation, thereby delivering first-class results in the shortest time and with low wear and tear. A freely adjustable speed control also enables manual control of the feed rate. The parking brake is easy to use from the control panel. Naturally, the BFS 1350ALS also offers all the benefits of the BFS 1350L on page 11. 12 _ 13 WACKER NEUSON FLOOR SAWS •Faster cutting. •Less wear and tear on the blade and V-belt. •No monitoring or manual adjustment of feed. •Easy to switch on from the control panel. BFS 1350ALS Engine output 13 HP Max. blade diameter 50 cm Floor saw Technical Data. TECHNICAL DATA BFS 935B BFS 935AB BFS 1345B BFS 1345AB L x W x H (w/o guide wheel) mm 1,110 x 568 x 1,078 1,110 x 568 x 1,078 1,260 x 568 x 1,050 1,260 x 568 x 1,050 LxWxH (handle in trans. pos.) mm 801 x 568 x 966 801 x 568 x 966 801 x 568 x 966 801 x 568 x 966 Weight kg 83 87 95 95 Blade diameter mm 350 350 350 - 450 350 - 450 Blade arbor mm 25.4 25.4 25.4 25.4 Max. cutting depth cm 12 12 17 17 Nominal blade speed 1/min 2,200 2,200 2,200 2,200 Peripheral speed m/s with ø 350 mm with ø 400 mm with ø 450 mm 40.3 – – 40.3 – – 40.3 46.1 51.8 40.3 46.1 51.8 Tank volume (water) l 32 32 32 32 Engine Air-cooled single cylinder 4-cycle gasoline engine with low oil shutoff Manufacturer Wacker Neuson Honda Wacker Neuson Honda Type WM 270 GX 270 WM 410 GX 390 Displacement cm 3 265 270 404 389 Power kW (HP) at 1/min 6.6 (9.0) 3,600 6.6 (9.0) 3,600 9.9 (13.5) 3,600 9.6 (13.0) 3,600 Fuel type Normal gasoline Normal gasoline Normal gasoline Normal gasoline Max. fuel consumption l/h 3.2 3.0 4.2 4.3 Tank volume (fuel) l 6.1 6.0 7.0 6.5 Power transmission From engine through belt to cutting shaft Starting device Recoil starter Recoil starter Recoil starter Recoil starter Shortened wheelbase option No No Yes Yes TECHNICAL DATA BFS 1350L BFS 1350AL BFS1350ALS L x W x H (w/o guide wheel) mm 1,085 x 604 x 1,052 1,085 x 604 x 1,052 1,085 x 604 x 1,052 LxWxH (handle in trans. pos.) mm 998 x 604 x 1,015 998 x 604 x 1,015 998 x 604 x 1,015 Weight kg 134 136 153 Blade diameter mm 350 - 500 350 - 500 350 - 500 Blade arbor mm 25.4 25.4 25.4 Max. cutting depth cm 18.5 18.5 18.5 Nominal blade speed 1/min 2,200 2,200 2,200 Peripheral speed m/s with ø 350 mm with ø 400 mm with ø 450 mm with ø 500 mm 40.3 46.1 51.8 57.6 40.3 46.1 51.8 57.6 40.3 46.1 51.8 57.6 28 28 Tank volume (water) l 28 Engine Air-cooled single cylinder 4-cycle gasoline engine with low oil shutoff Manufacturer Wacker Neuson Honda Honda Type WM 410 GX 390 GX 390 Displacement cm 3 404 389 389 Power kW (HP) at 1/min 9.9 (13.5) 3,600 9.6 (13.0) 3,600 9.6 (13.0) 3,600 Fuel type Normal gasoline Normal gasoline Normal gasoline Max. fuel consumption l/h 4.2 4.3 4.3 6.5 6.5 Tank volume (fuel) l 7.0 Power transmission From engine through belt to cutting shaft Starting device Recoil starter Modifications reserved in the interest of continuous further development. Recoil starter Recoil starter First-class accessories for efficient site operation. Be it ceramics, concrete, asphalt or other construction materials - the wide range of Wacker Neuson diamond blades offers exactly the right blade to meet every requirement. All three qualities from "Standard" to "Professional" ensure economic, fast, precise work on the construction site. Accessories 16 _ 17 WACKER NEUSON FLOOR SAWS – – Angle grinders Standard Light WS – – Angle grinders Standard Top WS Cut-off saws Professional Turbo GR Angle grinders Standard Light WS Uni 300 - 350 – Cut-off saws Standard Light Uni 300 - 350 Cut-off saws Standard Top Jet – 115 - 230 – – Angle grinders Professional WS Uni 115 - 230 – – Angle grinders Professional WS Turbo 300 - 350 Cut-off saws Professional Turbo 300 - 500 Cut-off/floor saws Standard Light 300 - 600 Cut-off/floor saws Standard Top Cut-off saws Standard Top KH – 300 - 350 300 - 600 Cut-off/floor saws Professional 300 - 400 Cut-off saws BTS Concrete 300 - 500 Cut-off/floor saws Standard Light 300 - 600 Cut-off/floor saws Standard Top Angle grinders Professional WS Abrasive Cut-off/floor saws Professional Floor saws Professional Fresh Concrete 115 - 230 – – 300 - 600 350 – – ACCE MORE SSO FLOO RIES FOR R S AW S? C o n ta CERAMICS very hard At Wacker Neuson every segment of the blade is individually tested. Which is how we can guarantee you get the same consistent high quality in all our diamond blades. CONCRETE hard ct us. The self-explanatory model guide: Ideally suitable Suitable Wet cut Dry cut UNIVERSAL medium hard ASPHALT abrasive 18 _ 19 WACKER NEUSON FLOOR SAWS Accessories Cast-iron pipes Asphalt Floor topping Fresh concrete Asphalt on concrete Sandstone Soft sandy limestone Fireclay bricks Limestone Gas concrete Poroton, Unipor etc. Bricks Hollow bricks Solid concrete bricks Interlocking paving stones Plaster concrete Curbstones Clay bricks Slate Unreinforced cured concrete Exposed aggreg. concrete Reinforced concrete Concrete pipes Roof tiles Hard sandy limestone Porphyry Marble Tiling Product line 110 - 125 115 - 230 * Every Wacker Neuson diamond blade is safety-tested according to EN 13236 or VBG 49 and each individual segment is tested for flexural strength. Machine 115 - 125 300 - 350 Wacker Neuson diamond blades ensure an efficient, precise cut and do not compromise on quality. In addition, every Wacker Neuson diamond blade is color-coded to ensure that it is always optimally adapted to the material properties. Wet/dry cut Coarse ceramics Blade holder 20.0 / 22.2 / 25.4 mm Granite Diameter mm Hard clinker Color code Glazed clay pipes DIAMOND BLADES* Glazed tiles Diamond blades for professionals. From Wacker Neuson.