PCISA-BT QIG V1.02_20151218

PCISA-BT QIG V1.02_20151218
Half-size PCISA CPU Card with 22nm Intel® Atom™ On-board SoC,
VGA, iDP, Dual Intel® PCIe GbE, USB 3.0, PCIe Mini,
SATA, mSATA, COM, Audio and RoHS
PCISA-BT
Quick Installation Guide
Version 1.0
Dec 18, 2015
Package List
PCISA-BT package includes the following items:
1 x PCISA-BT single board computer
1 x SATA cable
1 x Utility CD
1 x QIG (Quick Installation Guide)
©2015 Copyright by IEI Integration Corp.
All rights reserved.
1
Specifications
SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core,
2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB
cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB
cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB
cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core,
512KB cache, TDP=5W)
Memory:
One 204-pin 1066/1333MHz single-channel DDR3L SDRAM
unbuffered DIMM (system max. 8GB)
Graphics:
Intel® HD Graphics Gen 7 Engines with 4 execution units,
supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Display Output:
Dual independent display
VGA (up to [email protected])
18/24-bit dual-channel LVDS by CH7511B DP to LVDS
converter (up to [email protected])
(optional, MOQ: 100 pcs/lot)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to
[email protected])
Ethernet:
LAN1: Intel® I211-AT PCIe controller
LAN2: Intel® I211-AT PCIe controller
2
External I/O Interface:
1 x VGA
2 x RJ-45
1 x USB 2.0
1 x USB 3.0
Internal I/O Interface:
1 x IR
1 x KB/MS (1x6 pin)
1 x LPT (2x13 pin)
4 x USB 2.0 (2x4 pin, P=2.54)
1 x RS-422/485 (1x4 pin, P=2.0)
1 x USB 2.0 (180 degree type A)
2 x RS-232 (2x5 pin, P=2.54)
2 x SATA 3Gb/s
1 x mSATA (SATA 3Gb/s, shares with SATA2)
Audio:
Support 7.1 channel HD audio by IEI AC-KIT-892HD kit
1 x Analog audio (2x5 pin)
TPM: 1 x TPM (2x10 pin)
SMBus: 1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Expansion:
1 x microSD socket
1 x PCIe Mini slot
PCIe-PCI bridge: ITE8892E
LPC-ISA bridge: F85226FG
PCI and ISA* signal via golden finger
* The ISA function is limited. Please refer to page 5 for details.
Watchdog Timer:
Software programmable supports 1~255 sec. system reset
Digital I/O: 1 x 8-bit digital I/O (2x5 pin)
3
Fan Connector:
1 x Smart fan connector (1x4 pin)
1 x System fan connector (1x3 pin)
Power supply: 5V/12V, AT/ATX support
Power Consumption:
[email protected],[email protected] (Intel® Atom™ E3845 1.91GHz CPU
with one 8GB 1333MHz memory)
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Dimensions: 185mm x 128 mm
Weight(GW/ NW): 1000g / 250g
Ordering Information
PCISA-BT-E38451-R10:
Half-size PCISA CPU card supports Intel® Atom™ E3845 (10W)
on-board SoC with VGA, iDP, Dual Intel® PCIe GbE, USB 3.0,
PCIe Mini, SATA, mSATA, COM, Audio and RoHS
PCISA-BT-E38251-R10:
Half-size PCISA CPU card supports Intel® Atom™ E3825 (6W)
on-board SoC with VGA, iDP, Dual Intel® PCIe GbE, USB 3.0,
PCIe Mini, SATA, mSATA, COM, Audio and RoHS
32205-003800-300-RS: RS-422/485 cable, 200mm
19800-000051-RS: Dual RS-232 cable, 230mm, P=2.54
19800-000075-RS: PS/2 KB/MS Y-cable with bracket, 220mm
32102-000100-200-RS:
SATA power cable, MOLEX 5264-4P to SATA15P
19800-000049-RS: LPT flat cable, 240mm
AC-KIT-892HD-R10:
7.1-channel HD audio kit with Realtek ALC892 audio codec
supporting dual audio stream
4
DP-DVI-R10:
DisplayPort to DVI-D converter board (for IEI iDP connector)
DP-HDMI-R10:
DisplayPort to HDMI converter board (for IEI iDP connector)
DP-LVDS-R10:
DisplayPort to LVDS converter board (for IEI iDP connector)
DP-VGA-R10:
DisplayPort to VGA converter board (for IEI iDP connector)
DP-DP-R10:
DisplayPort to DisplayPort converter board (for IEI iDP connector)
TPM-IN01-R11:
20-pin Infineon TPM module, software management tool,
firmware V3.17
NOTE:
ISA Limitation of PCISA-BT
Due to the limitation of Intel® Bay Trail processors, the
PCISA-BT does not support the following features:
Bus Master Cycles
DMA
LPC Memory Mapped Transactions
IRQ0, IRQ1, IRQ2, IRQ8, IRQ9, IRQ13, IRQ14
ISA Enable (IE) Bit
PnP
5
Jumpers setting and connectors
LABEL
ATXCTL1
J_CMOS1
JP2
JP3
SW1
J_ATX_AT1
F_PANEL1
VGA1
IR1
LAN1, LAN2
KB_MS1
USB3, USB4
SATA1, SATA2
M-SATA1
CPU_FAN1
SYS_FAN1
DIO1
CPU12V1
TPM1
SMBUS1
I2C_1
LPT1
CN1
JSPI1
JSPI2
LVDS1
INV1
DP1
COM1, COM2, COM3
USB1,5
USB1
FUNCTION
AT/ATX Power Mode Setting
Clear CMOS
LVDS Power Mode Setting
LVDS Backlight Mode Setting
LVDS1 Panel type Selection
AT/ATX Power Mode Setting
PWR & RST Buttons and indicators
VGA 15-pin Female Connector
IR Connector
RJ45 LAN ports
Keyboard/Mouse connector
Internal USB 2.0 Connectors
Serial ATA 2.0 Connectors
M-SATA Card Connector (M-SATA Only)
CPU Fan Connector
System Fan Connectors
Digital I/O Connector
ATX Power Source Connector
TPM Connector
SMBUS Connector
2
I C Connector
Internal Parallel Port Connector
EC Debug Port
Flash SPI ROM Connector
Flash EC ROM Connector
LCD Panel LVDS Interface Connector
LVDS Panel Backlight +12V Power Source
DP Connector
Internal Serial Port Connectors
USB2. 0 Port Connectors
USB3. 0 Port Connectors
6
J_CMOS1: Clear CMOS
PIN NO.
NC
(default)
Press button
DESCRIPTION
Keep CMOS Setup
(Normal Operation)
Clear CMOS Setup
ATXCTL1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1-2
AT Power Mode (default)
Short 2-3
ATX Power Mode
JP2: LVDS Power Mode Setting
PIN NO.
DESCRIPTION
Short 1-2
Short 2-3
+3.3 V (Default)
+5 V
JP3: LVDS Backlight Mode Setting
PIN NO.
Short 1-2
Short 2-3
DESCRIPTION
DC Mode (Default)
PWM Mode
F_PANEL1: PWR & RST buttons and indicators
PIN
DESCRIPTION
PIN DESCRIPTION
1
+5V
2
BEEP_PWR
PWR
3
NC
4
IPMI ID_LED+
LED
5
GND
6
IPMI ID_LED7
PWRBTN_SW#
8
PC_BEEP
PWR
BTN
9
GND
10
NC
11
+5V
12
EXTRSTHDD
LED
13
SATA_LED#
14
GND
SPKR
IPMI LED
SPKR
RESET
7
SW1: LVDS panel resolution selection
* ON=0, OFF=1; Single=S, Dual=D
4-3-2-1
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
DESCRIPTION
800x600 18-bit Single (Default)
1024x768 18-bit Single
1024x768 24-bit Single
1280x768 18-bit Single
1280x800 18-bit Single
1280x960 18-bit Single
1280x1024 24-bit Dual
1366x768 18-bit Single
1366x768 24-bit Single
1440x960 24-bit Dual
1400x1050 24-bit Dual
1600x900 24-bit Dual
1680x1050 24-bit Dual
1600x1200 24-bit Dual
1920x1080 24-bit Dual
1920x1200 24-bit Dual
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
Short 1-2
Short 2-3
ATX Power Mode (default)
AT Power Mode
VGA1: VGA 15-pin Female Connector
PIN NO.
DESCRIPTION
PIN NO.
V1
V3
V5
V7
V9
V11
V13
V15
RED
BLUE
GND
GND
VCC
NC
HSYNC
DDCCLK
DESCRIPTION
V2
V4
V6
V8
V10
V12
V14
DESCRIPTION
GREEN
NC
GND
GND
GND
DDCDA
VSYNC
8
IR1: IR Connector
PIN NO.
DESCRIPTION
P1
P3
P5
5V
RX
TX
PIN NO.
DESCRIPTION
P2
P4
NC
GND
LAN1, LAN2: RJ-45 LAN connectors
PIN NO.
DESCRIPTION
PIN NO.
1
2
3
4
LAN1_MDI0+
LAN1_MDI0LAN1_MDI1+
LAN1_MDI1-
7
8
9
10
DESCRIPTION
LAN1_MDI2+
LAN1_MDI2LAN1_MDI3+
LAN1_MDI3-
KB_MS1: Keyboard/Mouse Connector
PIN NO.
DESCRIPTION
PIN NO.
VCC
1
2
Mouse Clock
3
4
Keyboard
Clock
5
6
DESCRIPTION
Mouse Data
Keyboard Data
GND
USB3, USB4: Internal USB 2.0 connector
PIN NO.
DESCRIPTION
PIN NO.
1
VCC
2
3
USB_DATA4
5
USB_DATA+
6
7
GND
8
DESCRIPTION
GND
USB_DATA+
USB_DATAVCC
SATA1, SATA2: Serial ATA 2.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
2
3
4
GND
SATA_TX+
SATA_TXGND
5
6
7
8
SATA_RXSATA_RX+
GND
NC
9
CN2: M-SATA Card Connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
PCIE_WAKE#
N/C
N/C
N/C
GND
MSATA_CLK#
MSATA _CLK
GND
PLTRST_N
N/C
GND
SATA_RX+
SATA_RXGND
GND
SATA_TXSATA_TX+
GND
GND
+3.3V
+3.3V
+3.3V
CLINK_CLK
CLINK_DATA
CLINK_RST#
MSATA_DET
CPU_FAN1: CPU Fan Connector
PIN NO.
DESCRIPTION
1
GND
3
FANIO
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
+3.3V
GND
1.5V
N/C
N/C
N/C
N/C
N/C
GND
+3.3V
PLTRST_N
+3.3V
GND
1.5V
SMB_CLK
SMB_DATA
GND
USB_DATAUSB_DATA+
GND
N/C
N/C
N/C
1.5V
GND
+3.3V
PIN NO.
2
4
DESCRIPTION
+12V
PWM
10
SYS_FAN1: System Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
FANIO
3
GND
DIO1: Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
9
GND
Output 3
Output 1
Input 3
Input 1
CPU12V1: +12V Power Connector
PIN NO.
DESCRIPTION
1
3
GND
+12V
LCLK
LFRAME#
LRERST#
LAD3
+3.3V
LAD0
SCL
SB3V
GND
LPCPD#
DESCRIPTION
2
4
6
8
10
VCC
Output 2
Output 0
Input 2
Input 0
PIN NO.
DESCRIPTION
2
4
GND
+12V
TPM1: Trusted Platform Module Connector
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
9
11
13
15
17
19
DESCRIPTION
+12V
2
4
6
8
10
12
14
16
18
20
DESCRIPTION
GND
KEY
+5V
LAD2
LAD1
GND
SDA
SERIRQ
GLKRUN#
LDRQ#
11
SMBus1: SMBUS connector
PIN NO.
DESCRIPTION
1
GND
3
SMB_CLK
PIN NO.
2
4
DESCRIPTION
SMB_DATA
+5V
PIN NO.
2
4
DESCRIPTION
PCH_GP38
+5V
2
I2C_1: I C Connector
PIN NO.
DESCRIPTION
1
GND
3
PCH_GP39
LPT1: Parallel Port Connector
PIN NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
STROBE#
DATA0
DATA1
DATA2
DATA3
DATA4
DATA5
DATA6
DATA7
ACKNOWLEDGE#
BUSY
PAPER EMPTY
PRINTER SELECT
PIN NO.
DESCRIPTION
14
15
16
17
18
19
20
21
22
23
24
25
AUTO FORM FEED #
ERROR#
INITIALIZE#
PRINTER SELECT LN#
GND
GND
GND
GND
GND
GND
GND
GND
12
CN1: EC Debug Port Connector
PIN NO.
DESCRIPTION
PIN NO.
1
EC_EPP_STB#
2
3
EC_EPP_PD0
4
5
EC_EPP_PD1
6
7
EC_EPP_PD2
8
9
EC_EPP_PD3
10
11
EC_EPP_PD4
12
13
EC_EPP_PD5
14
15
EC_EPP_PD6
16
17
EC_EPP_PD7
18
DESCRIPTION
EC_EPP_AFD#
NC
EC_EPP_INIT#
EC_EPP_SLIN#
GND
NC
EC_EPP_BUSY
EC_EPP_KSI5
EC_EPP_KSI4
JSPI1: Flash SPI ROM Connector
PIN NO.
DESCRIPTION
1
+1.8V
3
SPI_SO
5
SPI_SI
PIN NO.
2
4
6
DESCRIPTION
JSPI2: Flash EC ROM Connector
PIN NO.
DESCRIPTION
1
+3.3V
3
SPI_SO
5
SPI_SI
PIN NO.
2
4
6
DESCRIPTION
SPI_CS#
SPI_CLK
GND
SPI_CS#
SPI_CLK
GND
13
LVDS1: LVDS Connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
GND
LVDS_DATA0
LVDS_DATA1
LVDS_DATA2
LVDS_CLK1
LVDS_DATA3
GND
LVDS_DATA4
LVDS_DATA5
LVDS_DATA6
LVDS_CLK2
LVDS_DATA7
GND
VCC_LCD
VCC_LCD
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
GND
LVDS_DATA0#
LVDS_DATA1#
LVDS_DATA2#
LVDS_CLK1#
LVDS_DATA3#
GND
LVDS_DATA4#
LVDS_DATA5#
LVDS_DATA6#
LVDS_CLK2#
LVDS_DATA7#
GND
VCC_LCD
VCC_LCD
INV1: Backlight inverter connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
LCD_BKLTCTL
3
4
+12V
5
BACKLIGHT ENABLE
DESCRIPTION
GND
GND
14
DP1: Internal Connector
PIN NO.
DESCRIPTION
1
HPD
2
AUXP
3
GND
4
AUXN
5
AUX_CTRL_DET_D
6
GND
7
GND
8
LANE2P
9
LANE3P
10
LANE2N
PIN NO.
11
12
13
14
15
16
17
18
19
20
COM1, COM2: RS-232 serial port connectors
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
9
DCD
RXD
TXD
DTR
GND
2
4
6
8
10
COM3: RS-422/485 serial port connector
PIN
DESCRIPTION
PIN
1
3
RXD485#
TXD485+
USB1,5: USB 2.0 Connector
PIN
DESCRIPTION
1
3
VCC
USB_DATA+
DESCRIPTION
LANE3N
GND
GND
LANE0P
LANE1P
LANE0N
LANE1N
+3.3V
+5V
N/A
DESCRIPTION
DSR
RTS
CTS
RI
GND
DESCRIPTION
2
4
RXD485+
TXD485#
PIN
DESCRIPTION
2
4
USB_DATAGND
15
USB1: USB 3.0 Connector
PIN NO.
DESCRIPTION
1
+5V
3
USB_DATA+
5
USB3.0RX7
AGND
9
USB3.0 TX-
PIN NO.
2
4
6
8
DESCRIPTION
USB_DATAGND
USB3.0RX+
USB3.0 TX+
16
Board Layout: Jumper and Connector Locations
(Unit: mm)
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement